Category : Boring Mills

Sub-Category : Borer Horizontal Floor Type CNC

Total Machines Found : 115

Select | Machine Details
 
  1
IDMA34936
MakeToshiba Japan
ModelBF130B
YOM2008.10 New
ConditionExcellent condition,under power
PhotoSee Photo
TOSNUC -999
ST: X:12000Y:4000Z:450W:1000
BT50,1600spm,ATC-90
Angular head AAC
Rotary table 3200*2500,
ST:2000 B axis scale
Spindle through X,Y
Table sheet. 1600*2400 , 4 set
E-kel 1000*2800 , 2 set
Chip Conv.
CNC
 
  2
IDMA34824
MakeGiddings & Lewis
ModelG60FX
YOM2002
ConditionGood Condition
PhotoSee Photo
CAPACITY:
SPINDLE DIAMETER:152 MM
SPINDLE TAPER : #50
VERTICAL HEADSTOCK TRAVEL, Y-AXIS:2743 MM
COLUMN TRAVEL, X-AXIS:7315 MM
SPINDLE TRAVEL, Z- AXIS:1219 MM
SPINDLE SPEED, VARIABLE:25-1120 RPM
FEEDS, X & Y AXES:1-300 IPM
FEEDS, Z-AXIS:1-200 IPM
FEEDS, W -AXIS:1-120 IPM
RAPID TRAVERSE:320 IPM
GIDDING & LEWIS INFEEDING CNC TABLE :
T-SLOTTED INFEEDING PLATTEN SIZE
1524 MM x 1829 MM
SLIDE INFEED, W-AXIS TRAVEL: 1829 MM
WEIGHT CAPACITY:50,000 LBS
WAY :HARDEND WAYS
BEARING :NON-METALIC
OVERALL HEIGHT:914 MM
WEIGHT :11,455 LBS
MACHINE EQUIPPED WITH:
GIDDING & LEWIS 8000M CNC CONTROL ( NEW 2002 )
40 STATION AUTOMATIC TOOL CHANGER
POWER DRAW BAR
THRU - SPINDLE COOLANT
FLOOD & MIST COOLANT
HIGH PRESSURE COOLANT PUMP FOR INJECTION TOOLING
SOFTWARE FOR U-AXIS CNC FACING HEAD
HARDENED RUNWAY WAYS
ROLL-UP WAYS COVERS FOR RUNWAY
DOUBLE ANTI-BACKLASH RACK AND PINION ON X AXIS
LUBRICOOL SYSTEM
3-WAYS COLUMN
FULL LENGTH CHIP CONVEYOR
40 HP SPINDLE DRIVE 460/3/60
 
  3
IDMI7772
MakePegard
ModelPrecivit 2MM
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
axis - X-Y-Z-W 6000 x 1800 x 900 x 500 mm with ISO 50 spindle of 130 mm . It is provided with ATC and the unit is completely retrofitted with Fanuc Drives.
 
  4
IDMA34419
MakeGiddings & Lewis
Model
YOM1970/2019
ConditionVery good condition
PhotoSee Photo
Spindle Diameter:125 mm    
Table Size: 1220 x 2500
Spindle Taper: 50
Spindle Speeds: 10 - 1120 RPM    
Tavels  
X Travel: 2130 mm
Y Travel :2130 mm
 Z Travel (Quill): 915 mm
W Travel (Saddle): 915 mm
Motor Driven with: 18 kW
Weight: 36 ton
 
  5
IDMA34364
MakeAsquith
ModelHFC180CNC
YOM1982
ConditionGood Condition
PhotoSee Photo  |  See Video
Machine Specification
Spindle 180mm dia. 50iso taper
Spindle speeds 9.6 – 712 rpm
Facing Head 1,200mm dia.
Maximum dia. Faced 1760mm
Milling sleeve flange dia. 280mm
Column Travel “X” Axis 8,000mm
Spindle Vertical Travel “Y” Axis 3,500mm
Spindle travel “Z” Axis 1,000mm
Facing Slide “W” Axis 280mm
Complete with:
Asquith 20000kg Rotary Table “B” Axis 2,440mm x 2440mm
Table traverse 1830mm “U” Axis
Heidenhain 415 CNC Pendant Control
3 off Floor plates
1800 x 400 x 4500mm, 11,000kg Each
Double swivel 50 iso Universal Milling Head
Documentation:
Electrical & Mechanical
Accuracy report
Annually service reports available
Machine Data:
Year 1982/2014
Model HFC 180CNC
 
  6
IDMA34279
MakeSkoda Czech
ModelW200HC
YOM1981/2006
ConditionGood Condition
PhotoSee Photo
Longitudinal displacement of the stand along the bed: 10,000 mm
Vertical displacement of the headstock on the stand: 4,000 mm
Square extension: 1600 mm
Quill extension: 1,990 mm
Max. travel of the quill to the floor: 750 mm
Quill diameter: 200 mm
Quill taper: ISO 60-Hydraulics
Quill speed: 0.8-800 rpm
 
  7
IDMA34278
MakeSkoda Czech
ModelWT200 GNR
YOM1978/2008
ConditionGood Condition
PhotoSee Photo  |  See Video
Control system: CNC Heidenhein TNC 530
Longitudinal displacement of the stand along the bed: 17,740 mm
Vertical displacement of the headstock on the stand: 5,000 mm
Square extension: 1590 mm
Quill extension: 2,015 mm
Max. travel of the quill to the floor: 310 mm
Quill diameter: 200 mm
Quill taper: ISO 60-Hydraulics
Quill speed: 1.6-630 rpm
Technical parameters of the table:
Table area: 4,000 x 4,500 mm
Table load: 80 t
Table travel: 2,000 mm
Table type: controlled
 
  8
IDMA34277
MakeSkoda Czech
ModelW200HC
YOM1989
ConditionGood Condition
PhotoSee Photo
Longitudinal displacement of the stand along the bed: 10,000 mm
Vertical displacement of the headstock on the stand: 4,000 mm
Square extension: 1600 mm
Quill extension: 1,990 mm
Max. travel of the quill to the floor: 750 mm
Quill diameter: 200 mm
Quill taper: ISO 60-Hydraulics
Quill speed: 0.8-800 rpm
Control:CNC Heidenhein TNC530
 
  9
IDMA34276
MakeSkoda Czech
ModelW200HBNC
YOM1986
ConditionGood Condition
PhotoSee Photo  |  See Video
Longitudinal displacement of the stand along the bed: 15,800 mm
Vertical movement of the headstock on the stand: 4,900 mm
Square extension: 1618 mm
Quill extension: 1,990 mm
Max. travel of the quill to the floor: 370 mm
Quill diameter: 200 mm
Quill taper: ISO 60-Hydraulics
Quill speed: 1.6-650 rpm
Technical parameters of the table:
Table area: 3,500 x 4,000 mm
Table load: 60 t
Table type: controlled Control:CNC Heidenhein TNC530
 
  10
IDMA34271
MakeTos ,Varnsdorf
ModelWRD170Q
YOM2013
ConditionGood Condition
PhotoSee Photo
CNC
Diameter of spindle — 170 mm.
Headstock vertical travel Y — 5000 mm
Column longitudinal travel X — 13000 mm
Rotary table 4000x4000 mm with load capacity of up to 130 tonnes
 
  11
IDMA34260
MakeWOTAN
ModelRapid4
YOM1986
ConditionGood Condition
PhotoSee Photo
Spindle - 140 mm,
Rotation speed from 3 to 2500 rpm,
drive power 4265 Nm, 59 kW,
Tool holder ISO 50,
X-axis 4054 mm,
Y-axis 2500 mm,
Z-axis 700 mm,
W axis 500 mm,
U-axis 1600 mm
Rotation W 360 °,
Rapid traverse of X, Y, Z and W axes 10000 mm / min,
Tool magazine - 70 pcs,
Machine table 2000 x 2500 mm,
Table load - 25000 kg,
Angle milling head 2011 DS technology
Overhaul was carried out in 2018
Approximate weight: 60,000 kg
Dimensions (L x W x H) approx .: 8000 x 5000 x 6000mm
Control:CNC SIEMENS SINUMERIK 850
 
  12
IDMA34189
MakeSKODA
Model
YOMRetrofitted in : 2007
ConditionGood Condition
PhotoSee Photo
Control : Siemens Sinumeric 840C
Spindle dia. 200 mm
Spindle speed 600 rpm
Spindle motor 100 Kw
Tool Type BT50
Size of ram 630 x 630 mm
Travel
X 10000 mm
Y 4000 mm
Z 1700 mm
W 1600 mm
Rotary Table
Size 4000 x 4000 mm
Travel 3000 mm
Load capacity 100 ton
Indexing 0.001 deg.
PLC control
Angle Head 3 ea
Work stand 2 ea
Chip Conveyor
Machine Weight : 100 ton
 
  13
IDMA34122
MakeShinada
Model
YOMOverhauled: 2019(incl Electrical and mechanic)
ConditionGood Condition
PhotoSee Photo
X axis 7000 mm
Yaxis 2500 mm
Z(1000)+W(500)=1500mm
Control: Fanuc 0imd
NC Facing head
Spindle speed: 1200 rpm
Spindle taper: ISO50
Spindle diameter: 130 mm
Ram diameter: 400 mm
 
  14
IDMA34058
MakeInnocenti
Model
YOM1995
ConditionGood Condition
PhotoSee Photo
Spindle : 200 mm,
X-axis : 12650 mm,
Y-axis : 4300 mm,
Z-axis : 1000 mm,
W-axis : 2000 mm,
Rotary table : 4250 mm x 4250 mm,
Capacity : 100 Ton,
Control : F-15M.
BT60 / chip conveyor / 0.001˚.
 
  15
IDMA33875
MakeWOTAN
ModelRapid2K
YOM1987
ConditionGood Condition
PhotoSee Photo
Boring spindle diameter: 140 mm
Column cross travel X: 4000 mm
Headstock vertical travel Y: 2500 mm
Boring spindle axial travel Z :800 mm
Column longitudinal travel W :1000 mm
Distance spindle to floor plate min/max. 0 / 2500 mm
Cutting feeds X,Y,Z,W 1 – 5000 mm/min.
0.001 – 50 mm/rev.
Rapids X,Y,Z,W 10000 mm/min.
Spindle taper ISO 50
Spindle motor rating: 57 KW
Spindle speed range :2 – 2000 rpm
Gear steps:4
Boring spindle torque max. 12130 Nm
Tool magazine positions 40
Tool magazine type Chain
Tool taper DIN 69871 A50
Tool diameter max.
Multiple- / Single edge 230 / 550 mm
Tool length max. 500 mm
Tool weight max. 30 kg
Machine weight approx. 21600 kg
Machine dimensions l x w x h 4900 x 9000 x 5500 mm
Machine height under floor 860 mm
Equipped with:
Safety Guards with contacts
Tooling package
Spare part package
Unused WOTAN universal milling head
Facing and contouring/boring head D’Andrea „Sensitiv“ U-Tronic 5-630S
(Facing chuck)
Head diameter 630 mm
Facing slide 200 mm
Feeds 1 – 400 mm/min, Rapids 400 mm/min
Speeds to 250 rpm, Torque max. 8000 Nm
Facing diameter max. 1250 mm
Chip conveyor
Coolant unit and filter
Electronic handwheel
Prepared for NC rotary table
 
  16
IDMA33251
MakeMitsubishi
ModelMAF-S150A
YOM
ConditionGood Condition
PhotoSee Photo
pindle Bore Diameter : 149.86mm
X-Axis Travel : 4495.80mm
Y-Axis Travel : 1998.98mm
Z-Axis Travel : 650.24mm
W-Axis Travel : 650.24mm
Pallet Size (2 Pallets) : 1244.60mm x 1244.60mm
B-Axis Positioning : 0.001°
Spindle Speed : 2500 RPM
Spindle Taper : 50
Spindle Motor (Continuous / 30 min.) : 22.37 kw / 29.83 kw
Rapid Traverse, X-Axis : 166.79 mm/sec
Rapid Traverse, Y & Z-Axis : 199.81 mm/sec
EQUIPPED WITH :
Fanuc 15-M CNC Control
4-Axis Capability w/ Both Pallets
Coolant Through Spindle
40-Pocket Automatic Tool Changer
 
  17
IDMA33025
MakeSkoda Czech
ModelW200G
YOM1976
ConditionGood Condition
PhotoSee Photo
Spindle 200 mm
Main spindle ball metrical: 120mm
Column travel X 8000 mm
Headstock vertical travel Y 3500 mm
Spindle axial travel Z 2000 mm
Ram travel W 1600 mm
Control: Measuring in 3 axes

Feed, spindle 1600 mm/min
Feed, vertical milling head 3200 mm/min
Motors: 83; 7.2; 3.6 kW. Total 150 kW
1,6- 630 rpm
Total weight 115 to
Skoda W 200 G. have no 4 floor plates 1800x5500 mm, without rotary table.
 
  18
IDMI7172
MakeWMW Niles ,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Bed Size – 6600 mm x 2200 mm
Travel X x Y – 6000 mm x 2200 mm
Spindle – Dia 154 mm
Quill Movement – 750 mm
3-Axis Motion Control with Servo & Ball Screw driven
Fitted with Allen Bradley PLC 8510 AC Spindle Drive System
 
  19
IDMA32797
MakeSkoda Czech
ModelWD200A
YOM1961
ConditionGood Condition
PhotoSee Photo
Electronics rebuilt in 1996, Numeric control upgraded in 2013 with a Fagor 8070
Spindle diameter: 200 mm
X: 8000 mm
Y: 3100 mm.
Spindle travel (Z): 2000 mm.
RAM travel (W): 1600 mm.
Motor (ASI Robicon) 48 KW (dated 2002)

Rotary/Translating table (table is electrified and commands are on control panel, but it is not CN controlled)
Size 2000 x 2000
Load rating 15t
Accessories: Right angle head, long boring tools and supports.
Machine can be inspected under power till October end.
 
  20
IDMA32718
MakeSkoda Czech
ModelWD200/IntoHCW2
YOM2013
ConditionExcellent condition,under power
PhotoSee Photo  |  See Video
Spindle dia: 200 mm,
X travel: 12000 mm,
Y travel: 5000 mm,With birotative automatic millings heads,
Control: 840D
 
  21
IDMA32706
MakeScharmann
ModelWF125/225
YOM1983 (2013)
Conditionexcellent working condition
PhotoSee Photo
X axis course: 5300 mm,
Y axis course: 2700 mm,
Z axis course: 700 + 800 mm,
Tools standard Morse 50
Machine weight: 71 tons,
Engine type: AC
Control : FMS 3200
 
  22
IDMA32541
MakeAsquith
ModelHFC180CNC
YOM1982/2014
ConditionGood Condition
PhotoSee Photo  |  See Video
pindle 180mm dia. 50iso taper
Spindle speeds 9.6 – 712 rpm
Facing Head 1,200mm dia.
Maximum dia. Faced 1760mm
Milling sleeve flange dia. 280mm
Column Travel “X” Axis 8,000mm
Spindle Vertical Travel “Y” Axis 3,500mm
Spindle travel “Z” Axis 1,000mm
Facing Slide “W” Axis 280mm

Complete with:
Asquith 20000kg Rotary Table “B” Axis 2,440mm x 2440mm
Table traverse 1830mm “U” Axis
Heidenhain 415 CNC Pendant Control
3 off Floor plates
1800 x 400 x 4500mm, 11,000kg Each
Double swivel 50 iso Universal Milling Head

Documentation:
Electrical & Mechanical
Accuracy report
Annually service reports available
 
  23
IDMA32483
MakeSKODA
Model
YOM2015
ConditionGood Condition
PhotoSee Photo
X- 16500 mm
Y- 6000 mm
Z-3400 mm
Taper ISO - IS050
Speed from N- 1 rpm
Speed till N- 3000 rpm
T-slot fixture table size L - 3500 mm
T-slot fixture table size W - 3500 mm
Workpiece weight max. - 52400 kg
Coolant pump yes
Chip conveyor Yes
CNC Control, brand, type - Siemens, sinumerik+afstandsbediening HT2
Electric connection - 400V
Manual present Yes
Machine weight 80000 kg
Dimension L - 25500 mm
Dimension W - 16400 mm
Dimension H - 10900 mm
Description - Equipped with automatic tool changing station 100-fold, max tool: 360x500mm/50kg:
vetically and horizontally movable steering cab
Rotatable T-slot clamping TDV70
table type,
3x cutter-/drilling head, IFVW CE 103, CE 112 and
types IFVW UFK600
5-Position milling heads- ISQ5.26V/L;span
Storage magazine, type discharge conveyor;
 
  24
IDMA32369
MakeSchiess,German
Model
YOM2009
ConditionVery good condition
PhotoSee Photo
spindle dia 200 mm
x-travel 21500 mm
y-travel 5000 mm
power capacity 80 kW
z-travel 1500 mm
w-axis 800 mm
C-axis +/- 190 °
dimension of the ram 600x520 mm
V-axis 2500 mm
ψ of quill 200 mm
B-axis (table) 360 °
number of spindle speeds --
total power requirement ----- kW
weight of the machine ca. ----- t
dimensions of the machine ca. ----- m
Accessories:
CNC-Control Siemens 840 D, 120-station tool changer, floor plates 14000 x 5000 mm, Rotary
table 4500 x 3750 mm, Quill 200 mm, HSK 100 Internal coolant, chip conveyor, angular head WB
1 C, Universal milling head UB 1 C Angular head B 1 XL, Tool breakage control, Pick Up Ball
screw on the Y-axis needs repair.
 
  25
IDMA32261
MakePegard
ModelPreciram2
YOM2008
ConditionGood Condition
PhotoSee Photo
Spindle: 160 mm,
Capacity: 10500 x 2600 x 600 + 700 mm,
Longitudinal ( X): 10500 mm,
Vertical (Y): 2600 mm,
Cross ram (Z): 700 mm,
Quill (W): 700 mm,
Spindle power: 64,5 Kw,
Rotating speed: 0-1500 Rpm,
Taper: ISO50
Feeds:
Rapid X: 15 m/min,
Rapid Y: 15 m/min,
Rapid : 15 m/min,
Rapid W: 15 m/min,
X: 10 m/min,
Y: 10 m/min,
Z: 10m/min,
W: 10 m/min,
ATC, tool taper: ISO 50
Size: 15500 x 6500 x 5500 mm,
Filtration,
Chiller,
Chip convyor,
Andrey.
 
  26
IDMA31930
MakeScharmann
Model
YOM1983
ConditionGood Condition
PhotoSee Photo
Specifications:
Retrofit In 2000
FEATURES:
Heidenhain TNC 426 7-Axis CNC Control (New 2000)
2489 mm x 2997 mm Scharmann B-Axis Infeeding Rotary Table
Facing Head, 1219 mm (1220 MM)
Facing Head, 686 mm (680 MM)
Right Angle Head, 1346 mm (1345 MM)
Right Angle Head, 610 mm (600 MM)
Universal Right Angle Head, 610 mm (600 MM)
Hydrostatic Ways on X & Y Axes
56 KW Spindle Drive
CAPACITY:
Spindle Diameter 225 mm
Spindle Taper #60 CAt w/ #50 Adapter
Ram Size 483 mm x 584 mm
Vertical Travel of Head,y 4999 mm
Horizontal Column Travel,x 7998 mm
Ram Travel,z-1 1300 mm
Spindle Travel,z-2 1300 mm
Total Axial Travel 2598 mm
Spindle Speeds: 2-800 RPM
Rapid Traverse: 5994 mm/min
Table Weight Capacity 36312 KG
B-Axis, Rotary Table .001 Positioning
V-Axis, Rotary Table 3048 mm
EQUIPPED WITH:
Hiedenhain TNC 426 7-Axis CNC Control (New 2000)
2489 mm x 2997 mm Scharmann CNC Infeeding Rotary Table
Facing Head, 1219 mm (1220 MM)
Facing Head, 686 mm (680 MM)
Right Angle Head, 1346 mm (1345 MM)
Right Angle Head, 610 mm (600 MM)
Universal Right Angle Head, 610 mm (600 MM)
Hydrostatic Ways on X & Y Axes
56 KW Spindle Drive
NOTE:
Jib Crane on Column is not Available
Machine Weight: 149,400 KG (147064 KG
Inspect Under Power In USA Plant!
 
  27
IDMA31883
MakeKuraki,Japan
ModelKBT13DXA
YOM1988
ConditionGood Condition
PhotoSee Photo
Spindle dia: 130 mm,
Table size: 2000 x 1600 mm,
Stroke:
X: 3000 mm,
Y: 2000 mm,
Z: 1300 mm,
W:700,
0.01 index
With chip conveyor,
Control: Fanuc-15M
BT50,
ATC40
 
  28
IDMA31655
MakeMitsubishi
ModelMAFRS150B
YOM1994
ConditionGood Condition
PhotoSee Photo
Spindle dia: 150 mm,
X travel: 7000 mm,
Y travel: 3250 mm,
Z travel: 700 mm,
W travel: 900 mm,
1200 RPM,
BT50
ATC60
Spindle motor: VAC30/37 KW,
Control: Fanuc-15M
 
  29
IDMA31645
MakeSchiess,German
ModelFB160
YOM1976/91 Revision by Company Schiess
ConditionGood Condition
PhotoSee Photo
6 axis
X- 6000 mm
Y- 2500 mm
Z- 1180 mm
W- 1200 mm
B- 360° 0,001
V- 2450mm
Ram stroke : 750 mm
Spindle Taper ISO 50
Spindle dia: 160 mm
CNC Rotary Table
2000 x 2500 mm
0,001 360*
Payload 25.000 kg
Angular Milling Head
2 x Floor plates
Control:Siemens 850 M
 
  30
IDMA31574
MakeMitsubishi
ModelMAF280/210NC
YOM2010
ConditionGood Condition
PhotoSee Photo
CAPACITY:
Vertical Headstock Travel,Y-Axis: 6000 mm
Column Travel, X-Axis: 12500 mm
Main Spindle Travel, Z-Axis:1300 mm
Ram stock, Travel, W-Axis: 1000 mm
Combined Travel Z & W Axis: 2297 mm
Auxillary Spindle, C-Axis: 500 mm
Ram stock, Travel, W-Axis: 1000 mm
Combined Travel C & W Axis: 1500 mm
Main Spindle Speeds, Z-Axis:3-600 RPM
Auxillary Spindle Speeds, C-Axis :75-2800 RPM
High Speed Shaft For Attachments:7-2500 RPM
Front Plate Dimensions:805 mm x 1075 mm
Rapid Traverse X,Y,Z Axes: 5000 mm/min
Feed Rate:0.04-4000 mm/min

Main Spindle, Z-Axis:
Boring Spindle Diameter: 210 mm
Milling Spindle Diameter: 310 mm
Spindle Taper:#60 ANSI
Spindle Travel, Z-Axis:1300 mm
Speeds:3-600 RPM
Spindle Motor:75 KW/ 89 KW

Auxillary Spindle, C-Axis:
Spindle Diameter: 280 mm
Spindle Taper: #60 ANSI
Spindle Travel: 500 mm
Spindle Speeds:75-2800 RPM
Maximum Thrust:2996 KG
Spindle Motor:15 KW
Coolant Thru Spindle:Yes

DESCRIPTION OF AXES:
Column Travel:X-Axis
Spindle Vertical: Y-Axis
Main Spindle In & Out Z-Axis
Auxilliary Spindle In & Out:C-Axis
Surfacing Slide: U-Axis
Headstock In & Out:W-Axis
Rotary Table Traverse:V-Axis
Rotary Table Rotation:B-Axis

MITSUBISHI DIT-AP 25X25 CNC B-AXIS INFEEDING ROTARY TABLE:
Table Size:2500 mm x 2500 mm
Rotary Table Weight Capacity: 49929 KG
Table Revolution:0.00015-0.66 RPM
Table Rapid Speed:0.66 RPM
Table Traverse:1500 mm
Table Rotation:360 Degrees
Table Rotation: Infinitely Variable
Feed Rates, Table Base 3 mm/min to 5004 mm
Rapid Traverse, Table Base :5004 mm/min
Width of Slideways: 230 mm each
Indexing Accuracy:+/- 2.1 Seconds of
Table Bearing: Hydrostatic
Floor Space L x W:4800 mm x 2125 mm

EQUIPPED WITH:
Siemens 840D Solution Line CNC Control (Retrofit 2010)
2800 RPM Auxillary Spindle
Through Spindle Coolant
Long Reach Milling Attachment: #50 Taper, 1200 RPM
Universal Milling Head, Model UHM-40, 1067 mm Reach
Facing Head, Surfacing Slide, Model SHM-2000 U-Axis
Full Length Chip Conveyor
2-Ton Jib Crane For Loading Attachments
75 KW / 89 KW Main Spindle Motor
 
  31
IDMA31363
MakeSKODA
ModelW200 HB CNC
YOM1992
ConditionVery good condition
PhotoSee Photo
system Siemens Sinumeric 880
- X/Y/Z/W=12480/2700/2000/1600 mm
- rotary table SKODA SAE 35 NC
- rotary table surface 3500x2800 mm
- table indexing 360x1 degree
- vertical milling head
- floor plates (2 pcs, each 8000x1885x400 mm)
- spindle 200 mm
- spindle 800 RPM
- spindle taper ISO 60/ ISO 50
- spindle accuracy 0,02 mm
- repeated positioning accuracy 0,02
- books
 
  32
IDMA31321
MakeSKODA
ModelW160HC
YOM1991 General Overhaul : 2006
ConditionGood Condition
PhotoSee Photo
CNC System : SIEMENS 840D
X-8000mm
Y-3150mm
Milling head
Cnc Rotary table
Floor plates
 
  33
IDMA31304
MakeSKODA
ModelW160HC
YOM1991
ConditionGood Condition
PhotoSee Photo
Make : Skoda
Model : W160HC
GO 2006 SIEMENS 840D
X-8000mm
Y-3150mm
Milling Head Cnc Rotary table Floor plates
 
  34
IDMA31158
MakeWMW Union ,Germany
ModelBFT130
YOM1989
ConditionGood Condition
PhotoSee Photo
Table : 2000 x 1800mm
Courses : 2785 x 2520 x 2320 x 900mm
Spindle: 130mm
CNC Heidenhain TNC 355
 
  35
IDMA31076
MakeWOTAN
Model
YOM1985/2000/2010
ConditionGood Condition
PhotoSee Photo
Spindle : 160 mm
x-travel : 16000 mm
y-travel : 4455 mm
turning speed range : 0-1800 U/min
w-axis : 900 mm
z-axis : 800 mm
feed range : 1-5000 mm/min
spindle drive : 90 kW
rapid traverse : 5 m/min
dimension of the ram : 360x360 mm
taper ISO : 50
total power requirement : -- -- - kW
weight of the machine ca. : 75 t
dimensions of the machine ca. : 22,0x4,4x8,7 m
 
  36
IDMA31075
MakeUNION/WALDRICH
Model
YOM1978/2007
ConditionGood Condition
PhotoSee Photo
Spindle : 200 mm
x-travel : 15000 mm
y-travel : 5000 mm
z-travel : 1500 mm
spindle motor : 75 kW
w-axis : 1200 mm
spindle taper ISO : 60
spindle turning speed range : -800 U/min
ram head dimension : 600x0750 mm
feed in x - axis : -3 m/min
feed in y - axis : -1,2 m/min
rapid travel - X/Y/Z : 6000/3000/3000 mm/min
total power requirement : -- kW
weight of the machine ca. : 350 t
dimensions of the machine ca. : 26,0x17,0x15,2 m
SIEMENS 840C CNC-Control Rotary table 5200mm dia., 100to load, V-Axis 3300mm, 6x floor
plates 5000x2000x350mm, X-axis -hydrostatic, Universal-, Angle- and Facing Heads (controlled),
bore bar, 90x tool changer, HEIDENHEIN scales, coolant, chip conveyor etc.
 
  37
IDMA31073
MakeSKODA
Model
YOM1991
ConditionGood Condition
PhotoSee Photo
Spindle : 200 mm
x-travel : 12500 mm
y-travel : 5000 mm
z-axis : 1600 mm
w-axis : 2000 mm
spindle turning speed range : -930 U/min
drive capacity - spindle motor : 77 kW
dimension of the ram : 520x520 mm
total power requirement : 180 kW
weight of the machine ca. : -- -- t
dimensions of the machine ca. : -- -- m
SIEMENS 880 M NC-control Equipped with the following accessories: - Floor plates: 8 items
(each 4.000 x 2.100 x 400 (thickness) mm - Angle head: IFW3A / SK60 - Angle head: IFVW1B 200
m / SK40 - Angle head: IFH1 / SK60 - Angle head: IFVW 1A 200 / MK 4
 
  38
IDMA30977
MakeWMW Union ,Germany
ModelBFP130
YOM1996
Condition
PhotoSee Photo
X/Y/Z: 5200/2500/400mm
Control: Heidenhain TNC 415
Table: 2000x1800mm
Floor Plates: 6000x4000mm
BFP 130/8
 
  39
IDMA30976
MakeSkoda Czech
ModelW160
YOM2000
ConditionGood Condition
PhotoSee Photo
X/Y: 8000/6000mm
Control: Siemens 840C
Table: 3000x3000mm, 40to
Floor Plates: 8000x5000mm
W160 HE
 
  40
IDMA30568
MakeTitan Romania
ModelAFP200
YOM1989/ overhauled in 2010
Condition
PhotoSee Photo
X/Y/Z/W stroke : 19000/ 4000/1200/1500 mm
Rotary table : 3000 x 3000 x 1000 360 degree indexing
Floor plates 4 pieces , size : 2000 x 4000 x 420 mm
Chip conveyor,
2 x angle plates
CNC Control : FANUC 18iMB
Spindle dia : 200 mm
Spindle RPM : 700 upm
 
  41
IDMA30344
MakeChina Kunming
ModelTH6916
YOMNew in 2008
ConditionGood Condition
PhotoSee Photo
Spindle diameter: 160 mm,
Strokes:
X: 12000 mm,
Y: 4500 mm,
Z: 1100 mm,
W: 900 mm,
bed width: 1500 mm,
Motor power: 60 KW,
CNC rotary table: 3000 x 3000 mm,
ATC: 40 stations
Control: fanuc 18iM
Option:
Angle head,
Universal head
Extension
Spindle thru coolant
Chip conveyor,
Floor plate - 8 pcs
 
  42
IDMA30310
MakeWMW Union ,Germany
ModelBFP130NC
YOM1989
ConditionGood Condition
PhotoSee Photo
Spindle dia : 130 mm,
Table : 1800 x 2000 mm,
X-7000 mm, Y-2520 mm,
Weight : 55,7 ton.
Control HAIDENHAIN TNC 355.
 
  43
IDMI6592
MakeInnocenti
ModelHBM147.5
YOM1980
ConditionGood Condition
PhotoSee Photo
X Axis Stroke : 8800 mm,
Y Axis Stroke : 2750 mm,
Z Axis Stroke : 1350 mm,
W Axis Stroke : 575 mm,
Spindle dia : 147.5 mm,
Spindle taper : BT-50 with 5 axis head,
Rotary table max load : 35 T,
Rotary table dimension : 2500 x 3000 mm,
Control CNC 840D.
 
  44
IDMA29675
MakeWMW Union ,Germany
ModelBFP130NC
YOMNew 1990
ConditionGood Condition
PhotoSee Photo
Spindle diameter: 130 mm SA50
Travels:
Longitudinal: 400 mm,
Cross: 7000 mm,
Vertical: 3000 mm,
Travel of spindle: 900 mm,
Maxi speed: 1000 rpm,
Motor: 50 Kw,
Control: CNC Heidenhain 355
With facing head and floor plates,
 
  45
IDMA29591
MakeWotan,West German
ModelRapid3
YOM1981/1992 Upgarde
ConditionVery good condition
PhotoSee Photo
X travel: 6000 mm,
Y travel: 2500 mm,
Z travel: 700 mm,
W axis (spindle stroke): 960 mm,
Spindle speeds from: 3.2 to 1250 RPM,
Main motor: 62 kW,
Total power requirement: 84 kW,
Machine weight about: 60 tons,
Control: Siemens 880 M
Accessories:
1. Floor plates 6 x 1800 x 2400 x 310 mm T-slots 38 mm, spacing 250 mm,
total size: 5400 x 4800 mm= 25.9 sqm,
2. Moving rotary table/ Scharmann, 15 tons,
3. Spindle support dia: 750 x 700 mm,
4. One angular milling head/Huron,
5. Chip conveyor with angular discharge and chip box
6. Wedges to adjust the bed
 
  46
IDMA29571
MakeInnocenti
ModelFAF305/200CWB
YOM1996
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 200 mm,
Cross travel (X) : 12400 mm,
Vertical travel (Y) : 4800 mm,
Ram movement (Z) : 0-890 mm,
Spindle movement (w) : 2000 mm,
Spindle taper : ISO 60,
Spindle speeds : 1,8-445 Rpm,
Extra, Spindle gearing head x 6,4 : 2848 Rpm,
Ram Size : 1230 x 830 mm,
Control System : Siemens 840C X-Y-Z-W axis.
Accessories :-
Floor Plates : 15500-6400 mm,
Rotary Table : 2280x2280 mm,
Table load : 20000 kg,
Arbor support,
Boring bars : 3 pc(s),
Angles Plane : 4 pc. 4m - 4 small,
Vertical Heads - Supports and many more.
Weight : 550 ton.
 
  47
IDMA29511
MakeWMW Union ,Germany
ModelBFP130
YOM1992
ConditionGood Condition
PhotoSee Photo
Spindle diameter: 130 mm,
X travel: 4200 mm,
Y travel: 2020 mm,
Z travel: 420 mm,
W travel: 770 mm,
Taper: SK50,
Speeds: 6-1200 rpm,
Control: Heidenhain TNC 355,
Acessories
Rotary table Union, Model TI1800,
Floor plates.
 
  48
IDMA29490
MakeWMW Union ,Germany
ModelCBFK130
YOM1990/2006
ConditionGood Condition
PhotoSee Photo
Spindle dia: 130 mm,
X travel: 2000 mm,
Y travel: 1250 mm,
Z travel: 1250 mm,
W travel: 400 mm,
Table size: 1250 x 1600 mm,
B travel: Rotary 360.000 positioning only,
Spindle motor: 37.7 kw (50 HP),
Spindle taper: ISO 50,
Spindle speed: 6-3000 RPM,
Rapid traverse: 394 IPM,
Positioning table speed: 3 RPM,
Inductosyn scale feedback on all liner axis,
Encoder feedback on positioning table and spindle,
Max work piece weight on table: 8000 kg,
Machine weight: 28,637 kg,
Automatic tool changer: 60 tools,
Max tool weight: 32 kg,
Max tool diameter: 250 mm,
Max tool width: 500 mm,
Contouring head capable, ITS CH16 contouring head software installed,
Control: Fanuc 16MA CNC,
Fanuc servo motors and drives,
1,960 operating hours,
1,457 cutting hours.
 
  49
IDMA29426
MakeSan Rocco
ModelFutuira13
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia: 130 mm,
X travel: 8000 mm,
Y travel: 2500 mm (Vertical),
Z travel: 789,
Stolle 4000 x 2000 mm + Table 20 ton, 2200 x 2200 mm,
Control: ECS2400D
 
  50
IDMA29380
MakeEmtech
Model
YOM2012
ConditionGood Condition
PhotoSee Photo
Spindle dia: 130 mm,
SK50 taper,
20 ton 1.8 m rotary table,
Control: Fanuc
 
  51
IDMA28884
MakeAsquith
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle : 200 mm
X-axis : 22000 mm
Y-axis : 5500 mm
Rotary table : 2000 mm x 2000 mm
Control : Sentrol300
 
  52
IDMA28867
MakeMitsubishi
ModelMAFRS150B
YOM1985
ConditionGood Condition
PhotoSee Photo
Spindle dia:150 mm
Control: Fanuc11M,
S(XY):14000 x 3500 mm,
ATC:80,
AAC present
 
  53
IDMA28758
MakeToshiba Japan
ModelBSF24/15
YOM1974 / 2013
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 150 mm,
X axis travel : 10,400 mm,
Y axis travel : 4000 mm,
Z axis travel : 800 mm,
W axis travel : 1000 mm,
Spindle taper : NT 50,
Spindle speed : 1000 rpm,
Spindle motor : DC 52 KW,
Rotary table size : 3000 x 3000 mm,
V stroke : 2500 mm,
Rotary table capacity : 40 tons,
Rotary table rotation : 360 degree.
Control System : Fanuc 18iM (6 axis).
 
  54
IDMI6350
MakeSchiess Froriep
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle diameter:160 mm,
Ram size:340 x 400 mm,
Spindle taper: ISO 50,
Vertical Y axis:5000 mm,
Horizontal X axis: 13,500 mm,
Ram travel:800 mm,
Spindle travel: 900 mm, total 1700 mm,
Rotary table:2000 x 3000 mm,
Table movement ( CNC):2000 mm,
Table weight: 50 tons,
Vertical heads:
Universal right angle head,
Heavy duty right angle head,
Light duty right angle head,
Control: Siemens 840D.
 
  55
IDMA28666
MakeWMW Union ,Germany
ModelBFP130
YOM1989
ConditionGood working condition
PhotoSee Photo
Spindle diameter : 130 mm,
Travel X : 2500 mm,
Travel Y : 2000 mm,
Travel Z : 420 mm (electronically disabled- has to be checked),
W : 900 mm,
Floor plate : 2500 x 1500 mm,
Spindle speed up to : 1000 rpm,
All motors revised,
Ballscrew Y new ground,
Quill new ground,
New Screen,
Controller Heidenhain TNC 355.
 
  56
IDMA28562
MakeFPT
ModelArea-EV100
YOM2007 Installed 2008
ConditionGood Condition
PhotoSee Photo
Travel X-Axis : 10000 mm,
Travel Y-Axis : 3.500 mm,
Travel ram cross travel Z-Axis : 1500 mm,
Feed rate : 25.000 mm/min,
Spindle-mounting : ISO 50,
Spindle-driving : 37 kW,
Spindle-speed with constant power : 235 – 3000 min-1,
Spindle-torque : 1500 Nm,
Automatic Universal Continuous Positioning Bi-rotative Head, 2,5°.
Spindle Extension : 400 mm,
Automatic Tool-Changer,
Positions 80,
Tool diameter max. : 125/ 230 mm,
Tool length max. : 400 mm,
Tool weight max. : 20 kg,
NC-Rotary-Table :-
Type TRT 30-PT2525.
Clamping surface : 2500 x 2500 mm,
Table-loading : 30000 kg,
Travel V-Axis : 1500 mm,
B-Axis : 360,000°,
Equipment :-
Coolant device and paper-band filtre,
Coolant outside and through spindle 20 bar,
Swarf-conveyor,
Electronic hand-wheel,
Head pick-up station for three heads,
Floor plates : 2 x 1.500 x 6.000 mm,
Control HEIDENHEIN TNC 530I S.P.
Hydrostatic guide-ways for all axis.
 
  57
IDMA28367
MakeWotan,West German
ModelRapid2K
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dai: 140 mm,
X travel: 8000 mm,
Y travel: 4600 mm,
Z travel: 800 mm,
B axis: 360 degrees,
Spindle: ISO 50,
Drive power: 35.5-56 KW,
RPM: 2-2000,
Control: CNC Fanuc 15 M
 
  58
IDMA28180
MakeWMW Union ,Germany
ModelBFP130
YOM1991/INB 1994
ConditionGood Condition
PhotoSee Photo
Spindle diameter: 130 mm,
X travel: 7000 mm,
Y travel: 2500 mm,
Z travel: 420 mm,
W axis: 900 mm,
Spindle turning speed-stepless: 5-1000 U/min,
Spindle taper ISO: 50,
Dimensions of the machine ca: 9 x 6 x 5,6 m,
Plate size: 1,75 x 3,5 (5 x ) mm,
Feed stepless: 5-2500 mm/min,
Rapid traverse: 5 m/min,
Weight of the machine ca: 40 ton,
Total power requirement: 70 kW,
Control: Heidenhain TNC 355.
 
  59
IDMA28033
MakeTos Czech
ModelWHD130
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia: 130 mm,
Cross adjustment stand for bed axis Y: 4000 mm,
Vertical adjustment of head stock axis Y: 2380 mm,
Longitudinal displacement rotary table axis Z: 1400 mm,
Extension of working spindle axis W: 560 mm,
Taper spindle: ISO50,
Clamping tools: Hydromechanical,
Clamping force tools: 26 kN,
Spindle speed range: 10-2500 min-1,
Max. torque spindle: 1620 Nm,
Main motor power: 37 kW,
Clamping surface of table: 2000 x 2500 mm,
Max. work piece weight: 16000 kg,
Machine weight: 29000 kg,
Control: Heidenhain TNC 415
With rotary table.
 
  60
IDMA27876
MakeWMW Union ,Germany
ModelBFP130/6
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia: 130 mm,
X travel: 8500 mm,
Y travel: 2500 mm,
Z travel: 1000 mm,
Conttol: Fagor 8050M,
CNC control fitted 2008
 
  61
IDMA27488
MakeErnault Somua
Model
YOM1980 Retrofitted 1997
ConditionGood Condition
PhotoSee Photo
Diameter of spindle : 130 mm,
Travels :-
X : Longitudinal : 5500 mm,
Y ( vertical) : 3000 mm,
Z (ram) : 800 mm,
Z1 (spindle) : 600 mm,
ISO 50,
Spindle motor : 60 Kw,
Ram section : 300 x 325 mm,
Spindle speeds maxi : 800 Rpm,
CNC NUM 1060 with SIEMENS inverters.
Machine WITH CNC HEAVY ROTARY TABLE : 3500 X 3000 MM , LOADING APPROX 60 T
Rotation with double pinion
Travel : 2700 mm.
 
  62
IDMA27133
MakeInnse
ModelFAF210/150
YOMRebuilt 2006
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 150 mm,
X travel : 9700 mm,
Vertical travel : 4300 mm,
W+Z travel : 900 mm + 1200 mm,
Milling taper : 210 mm,
Spindle taper 150 mm type : SA 50,
WORKING SPEEDS :-
Spindle speed : 3χ850 rpm,
Plateau speed : 1,²χ71 rpm,
High speed spindle (continuos) : 45χ2700 rpm,
FEED RATE :-
W and Z axis : 0,²χ3.000 mm/1’,
Vertical axi : 0,⁵χ4.500 mm/1’,
X axis : 0⁵χ4.500 mm/1’,
Spindle motor power : 70 HP 2.700 rpm,
Max plateau working diameter : PST 100 4.000 mm,
Universal head : TU 16,
Service crane : 1,5 ton,
Machine weight : 82 ton.
Control : CNC ECS 4801.
All documentation and drawings included.
 
  63
IDMA27045
MakeMitsubishi
ModelMAF200/135
YOM1972 Retrofitted 1990
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 150 mm,
Stroke : 12000 X 5500 X 575 X 1475 mm,
Table length : 12000 mm x width 7400 mm,
Spindle rpm : 1200,
Automatic gear change : Step 3,
Spindle rotation : 3400 rpm,
Head stroke (Z axis) : 575 mm,
Boring main spindle (W-axis) : 1475 mm,
Saddle stroke (Y-axis) : 5500 mm,
Column stroke : (X-axis): 12000 mm,
Table stroke (V-axis) : 1500 mm,
Table rotation (B-axis) : 360 degrees,
Cutting speed : 1 ~ 3000 mm/m & 1-200 degree / min.
 
  64
IDMA27011
MakeWMW Union ,Germany
ModelBFP130TN
YOM1992 Reconditioned 2007
ConditionExcellent condition,under power
PhotoSee Photo
Spindle diameter : 130 mm,
Travel X : 11480 mm,
Travel Y : 3000 mm,
Travel Z : 420 mm,
Spindle travel : 900 mm,
Table size : 1800 x 2000 mm,
Taper ISO : 50,
Face plate diameter : 785 mm,
Spindle stroke : 900 mm,
Total power : 100 kW.
Equipped with angular milling head,
Face plate and rotary table : 1800 x 2000 mm,
With new Heidenhain iTNC 530 control.
 
  65
IDMA26900
MakeDufieux
Model
YOM2006
ConditionExcellent condition,under power
PhotoSee Photo
Spindle Taper : HSK100,
Ram size : 600 x 600 mm
Travel X axis : 7400/10660 mm,
Travel Y axis : 2000 mm,
Ram Z axis : 1250 mm,
W axis : 1000 mm,
Floor Plate : 4215 x 1405 mm (2 Nos),
With ATC,
With Chip Conveyor,
Motor Spindle : 50/75 Kw,
Control : CNC Siemens 840D.
Machine has only Ram (No Spindle quill).
 
  66
IDMA26847
MakeJuaristi
ModelMDR-250-CM
YOM1992
ConditionGood condition,under power
PhotoSee Photo
Spindle diameter : 205 mm,
Cross travel X : 8000 mm,
Vertical travel Y : 3000 mm,
Axial travel Z : 1250 mm,
Longitudinal travel W : 500 mm,
RPM : 3-700,
Universal huron head,
Main spindle support,
External refrigeration,
Plateform with panel,
Main motor : 37 KW,
Movement and feeds with induramat drives,
Control : Heidenhain TNC-355,
With Floor Plates.
Rotary table :
Juaristi MG-30 CNC
Table surface : 2000 x 3000 mm,
Longitudinal travels : 2000 mm,
Controled positions : 360,000,
Longitudinal travel controled with M functions,
Table capacity : 30 ton.
 
  67
IDMA26701
MakeShibaura
ModelBF132A
YOM1990
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 132 mm,
Dia of quill : 340 mm,
X axis cross travel of column (C) : 9000 mm,
Y axis vertical travel of spindle head (A) : 3500 mm,
Spindle travel (Z1 axis) : 1000 mm,
Quill stroke (Z2 axis) : 450 mm,
Taper hole of boring spindle nose : ISO No.50,
Total travel of quill and spindle : 1000 mm,
Fit up dia for cutter : 225 mm,
Spindle speeds : 5~800 rpm,
Two speed range continuous,
Automatic feed of each axis : 1~4000 mm/min,
Manual feed of each axis : 1~2000 mm/min,
Rapid traverse of each axis : 4000 mm/min,
Maximum spindle torque : 260 kgf-m,
Maximum spindle thrust : 3000 kgf,
Machine dimensions :
Height (B) : 8050 mm,
Width : 4,450 mm,
Length (D) : 14100 mm,
Mass. : 33,510 kg,
Control : Fanuc 15M
 
  68
IDMA26442
MakeToshiba Shibaura
ModelBF130A
YOM
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 130 mm,
Quill diameter : 340 mm,
Milling spindle diameter : 225 mm,
Strokes X : 7500 mm,
Y : 3000 mm,
Z : 1000 mm,
W : 450 mm,
V stroke : 4000 mm,
Rotary table size : 2000 x 2000 (mm/3 pallets),
Work load : 14 tons,
Rotary table index speed : 0.1 to 300 deg/min,
Control : Fanuc 15 M (5 axes controlled : X,Y,Z,W,V,B).
 
  69
IDMA26299
MakeToshiba Shibaura
ModelBSF24/15
YOMRetrofitted 2012
ConditionGood condition,under power
PhotoSee Photo
Spindle diameter : 150 mm,
Column travel X axis : 10,400 mm,
Vertical head travel Y axis : 4000 mm,
Spindle travel Z axis : 800 mm,
Ram travel W axis : 1000 mm,
Spindle speed : 1000 rpm,
Spindle taper : NT 50,
Rotary Table,
Rotary table size : 3000 x 3000 mm,
Rotary table weight capacity : 40000 kg,
V axis : 2500 mm,
Floor plate : 2000 x 6000 mm,
All of Material was made by CAST IRON. It’s original from TOSHIBA,
New serve motor, scale and accurate encoder,
Regrinding and reconditioning for Guide way and movement,
New hydraulic pump and related parts,
New electric cable / new telescopic way cover,
New decelerator for double pinion,
New hi-grade Ball screw for Y axis.
 
  70
IDMA26280
MakeCollet & Engelhardt
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 130 mm,
X travel : 10,000 mm,
Y travel : 3000 mm,
Z travel : 500 mm,
W travel : 500 mm,
Rotary table : 2000 x 2000 mm,
Floor plates : 3000 x 4000 mm / two units,
Control : Fanuc 18iMB,
Angle plate available,
Angle available,
Tools Available.
 
  71
IDMA26275
MakeWMW Union ,Germany
Model
YOM1988
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 130 mm,
Spindle stroke : 900 mm,
Rotary table : 2000 x 2000 mm,
Table stroke : 1500 mm,
Trokes of axes:
X : 7000 mm, Y : 3000 mm [ axes and bed condition are very good]
Floor plate : 2000 x 4000 [two plates]
Column moving : 400 mm,
RPM : 1500 [ DC motor RPM : 1750]
No noise,
Control : Sentrol2 [Heidnenhain controller was changed to sentrol2].
 
  72
IDMA26259
MakeWMW Union ,Germany
ModelBFP130
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Spindle diameter : 130 mm,
Column travel X axis : 7000 mm,
Vertical head travel Y axis : 2500 mm,
Spindle travel Z axis : 450 mm.
Ram travel W axis : 900 mm,
B axis : 360 degree,
V axis : 1140 mm,
Spindle speed : 1000 rpm,
Rotary table size : 2000 x 1800 mm,
Floor plate : 1750 x 3500/4 pcs,
Control : Fanuc 18i-Mb.
 
  73
IDMA26233
MakeScharmann
ModelEcocut3.6
YOM1980 Overhauled 1995
ConditionGood Condition
PhotoSee Photo
Machine No. 1
Spindle-diameter : 160 mm,
Travel X-axis : 12000 mm,
Travel Y-axis : L 2750 mm,
Travel Z-axis : 1000 mm,
Spindle-mounting : ISO 50,
Spindle-driving : 46/ 34 kW,
Spindle-speed : 10 – 2000 min-1,
Rotary Table :-
Clamping surface : 2500 x 3000 mm,
Weight of workpiece max : 40000 kg,
Travel V- Axis : 2500 mm,
4. Axis 360 x 0,001° (full B-Axis),
Hydrostatic guide-ways,
ATC 35 Positions,
Equipment :-
Angle-milling-head type WFK 254/550.
Machine No. 2
Spindle-diameter : 160 mm,
Travel X-axis : 12000 mm,
Travel Y-axis : 2750 mm,
Travel Z-axis : 1000 mm,
Spindle-mounting : ISO 50,
Spindle-driving : 46/ 34 kW,
Spindle-speed : 10 – 2000 min-1,
Rotary Table :-
Clamping surface : 2500 x 3000 mm,
Weight of workpiece max : 40000 kg,
Travel V- Axis : 2500 mm,
4. Axis 360 x 0,001° (full B-Axis),
Hydrostatic guide-ways,
ATC 35 Positions.
Control SIEMENS 880.
 
  74
IDMA26130
MakeScharmann
ModelWF132V
YOM1964/ Complete overhaul in 2005
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 130 mm,
X/Y/Z : 8850/2120/870 mm,
W axis : 1235 mm,
B axis : 360 °. Handwheel,
CNC rotary table : 1400 x 1600 ,
Work piece weight : 10 ton,
Control : Heidenhain TNC 530.
 
  75
IDMA25831
MakeSacem
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 130 mm,
Travel X : 8000 mm,
Travel Y : 3500 mm,
Rotary table : 2500 x 3000 mm,
ATC 80 EA,
30 ton load 1000/1 degree,
CNC System : FANUC 16M.
 
  76
IDMA22490
MakeWotan,West German
ModelB130P
YOM
ConditionUnder power
PhotoSee Photo
X travel : 5000 mm,
Y travel : 2500 mm,
Travels Z 900 mm,
Table 2000x2500 mm,
Spindle 130 mm, ISO 50,
Spindle speed range 3,2 - 1250 rpm,
Spindle motor 23 kW,
Control NUM 760.
 
  77
IDMA22261
MakeMAKE
ModelAltair200 10000 x 5000
YOM
ConditionBrand New
PhotoSee Photo
10000 x 5000 mm, X 10000 mm, Y 5000 mm, W 1200 mm, Z 800 mm.ATC60 - rotary table 3500 x 3500 mm-50 tons.
 
  78
IDMA22260
MakeMAKE
ModelAltair200 10000 x 4000
YOM
ConditionBrand New
PhotoSee Photo
10000 x 4000 mm, X 10000 mm, Y 4000 mm, W 1200 mm, Z 800 mm.ATC60 - rotary table 4000 x 4000 mm-60 tons.
 
  79
IDMA21984
MakeInnocenti
ModelCWB200
YOM1972 Retrofit 2007
ConditionGood Condition
PhotoSee Photo
Spindle did : 200 mm, X travel : 15000 mm, Y travel : 5000 mm, Z travel : 2000 mm, W travel : 1000 mm, Rotary Table : 3050 x 3050 mm, Table load : 70 Tons, Fanuc 16i-MB CNC Control, The machine is equipped with Ballscrews &Angle Head.
 
  80
IDMA21835
MakeWMW Union ,Germany
ModelBFP130/6
YOM1981
ConditionVery good condition
PhotoSee Photo
Motion of work head on frame (y) 1600 mm,
Spindle travel - W axis 1000 mm,
Main spindle speed range 4,5-900 rot/min,
Input 40 kW,
Rotary Table,
Floor plates -2pcs -- 2000x3500mm ,union.
In 2000 CNC modernization by Heidenhain TNC 355 with display BE 212, drives SIEMENS Simodrive 611 A and
digital linear sensors (rules) Heidenhain LS 603 C.
 
  81
IDMA21804
MakeMitsubishi
ModelMAFJRS180NC
YOM1982
ConditionGood condition,under power
PhotoSee Photo
Original stroke of Y stroke was 2200mm-Revised ro 3000mmn on top,
Ram Stroke 660,
Spindle Stroke 900,
Fanuc 18imb,
Angle head,
Rotary Table 2100*2100mm indexing 0.0001 Degree.
 
  82
IDMA21765
MakeWMW Union ,Germany
ModelBFP130/6
YOMRetrofit in 1994
ConditionGood Condition
PhotoSee Photo
Spindle dia : 130 mm, X travel : 6500 mm, Y travel : 2500 mm, W travel : 360 mm, Z travel : 1000 mm, Spindle Taper : ISO 50, Sindle Power : 18.5 kW, Spindle Speed : 4.5 - 900 RPM, Rotary Table : 2000 x 1800 mm, ECS 2400 CNC Control (1994), Total Weight : 51 Tons.
 
  83
IDMA21343
MakeJuaristi
Model
YOM
ConditionGood Condition
PhotoSee Photo
X travel : 10,000 mm, Y travel : 2500 mm, Z travel : 1500 mm, CNC Rotary Table : 2000 x 2000 mm, Floor Plate : 750 x 1000 mm, Heidenhain TNC 415 CNC Control.
 
  84
IDMA21065
MakeWotan,West German
Model
YOMRebuilt in 2001
ConditionGood Condition
PhotoSee Photo
Spindle dia:120mm,Travel X:3000mm, Y:2000mm, Z:586mm,Controller: Fagor CNC 8055 HC dialog, Floor plate: 1500x1500mm, Floor plate2:1x2000x1500mm, 1x2200x1500mm, ISO50, Spindle max omw/min:1000,
 
  85
IDMA20956
MakeSNK
Model
YOM1982
ConditionGood Condition
PhotoSee Photo
Spindle: 160 mm,
X axis Travel : 6400 mm,
Y axis Travel : 2150 mm,
Z axis Travel : 500 mm,
W axis Travel : 300 mm,
Table load: 30 ton,
table : 1400mm x 1800 mm,
ATC : 40,
CNC System : F - 15iMB.
 
  86
IDMA20892
MakeSacem
Model
YOM1993
ConditionGood condition,under power
PhotoSee Photo
Spindle dia : 130 mm, X travel : 8000 mm, Y travel : 3500 mm, Z travel : 1000 mm, Rotary Table : 2500 x 3000 mm, Floor Plates : 2400 x 3000 mm and 1700 x 3000 mm, 60 Automatic Tool Changer, Faunc 15M CNC Control.
 
  87
IDMA20890
MakeShinNippon Koki,Japan
Model
YOMRetroffited in 2009
ConditionGood condition,under power
PhotoSee Photo
Spindle dia : 130 mm, X travel : 7,000 mm, Y travel : 3000 mm, Spindle travel : 1500 mm, Quill travel : 300 mm, Spindle speed : 1300 RPM, Rotary Table : 2500 x 2500 mm, Table travel : 2000 mm, Floor Plates : 1500 x 2500 x 400 mm (3 Nos), Fanuc 18iM CNC Control (2009).
 
  88
IDMA20774
MakeTos Kurim
Model
YOM
ConditionBrand New
PhotoSee Photo
Working travels :
Longitudinal X-axis 5000 mm,
Cross Y-axis 1250 mm,
Cross Z-axis 2000 mm,
Spindle taper ISO 50.
Equipment :
- CNC HEIDENHAIN iTNC 530
- Chain type tool magazine R40 for 40 tools
- Swarf conveyor
- Head 2-axis type K - 3 500 rpm, max. torque 900 Nm.

 
  89
IDMA20244
MakeUnion Gera
ModelBFP130
YOM
ConditionGood Condition
PhotoSee Photo
x-y-z-w-13200 x 2500 x 420 x 900 mm, Spindle: ISO 50, Control-Heidenhain TNC 155
 
  90
IDMA19879
MakeWMW Union ,Germany
ModelBFP130
YOM1988
ConditionGood Condition
PhotoSee Photo
X - 9000 mm, Y - 2500 mm, Spindle dia - 130 mm, Taper ISO 50, Fix Table - 2300 x 1710 mm, Floorplates - 10500 x 1750 mm, Total Power - 50 kW, Machine weight - 60 tons. Angulare Head and Facechuck with Sliding head.
 
  91
IDMI5274
MakePegard
ModelPrecivit 2MM
YOM
ConditionVery good condition,Under power
PhotoSee Photo
Spindle dia. 130 mm,
Spindle taper ISO 50,
Travells :
X= 6000 mm,
Y= 1800 mm,
Z= 900 mm,
W= 500 mm,
With ATC, Rotary table and completely retrofited with new Fanuc Drives.
 
  92
IDMA19584
MakeRussian
Model2G660DF4
YOM1991
ConditionExcellent condition,under power
PhotoSee Photo
spindle dia 220 mm, X 6000 mm,
Y 3150 mm,
Tbale 4000 x 4000 mm,
2 plates x 3000 mm x 6000 mm,

Faceplate + 4 milling heads;
Faceplate diameter 1500 mm;
Table loading capacity 100 tons,
Machine weight 136 tons.
CNC Siemens Sinumeric System
 
  93
IDMA19010
MakeWMW Union ,Germany
ModelBFP130
YOM1994
Conditioncan be inspected under power
PhotoSee Photo
Spindle diameter 130 mm, X - 7000 mm, Y - 2500 mm, Z - 420 mm, W - 900 mm, Spindle taper ISO 50, Stroke of facing head 320 mm, Facing head diameter 785 mm, Spindle speed 1 - 1000 RPM, Feed rates : X / Y 5 - 5 000 mm/min, Z / W 2 - 3 150 mm/min, Rapids : X / Y 5 m/min, Z / W 3,15 m/min, Spindle power 52 kW, EQUIPED WITH : CNC unit : HEIDENHAIN TNC 355 for axis X,Y,Z & W, Floor plate 10000 x 2000 mm, 2 milling extension for spindle, Facing head, Steady rest.
 
  94
IDMA18975
MakeWMW Union ,Germany
Model
YOM
ConditionVery good condition
PhotoSee Photo
spindle dia 130mm,
X 7000mm
Y 3000mm
floor plate 2000x4000mm 2ea
rotary table
table size 2000x2000mm
table stroke 1200mm
chipconvear, CNC SYSTEM : CENTROL2 (2007 retrofit)

 
  95
IDMA18855
MakeStanko-Russia
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia. : 200 mm,
Table dimension : 6000 x 3000 mm,
Working dimensions : X =5000 MM, Y =1900 MM, Z =600 MM.
Precision 0,01 mm,
Max. load on table 10.
With CNC Holland.
 
  96
IDMA18854
MakeFPT
ModelSynthesis M100
YOM1998
Conditioncan be inspected under power
PhotoSee Photo
X-10826 mm, Y-2952 mm, Z-1181 mm, Ram Cross Section - 442 x 688, Spindle Speeds with Universal Head - 0-4000 RPM, Spindle Speeds with LS Spindle Head - 0-10000 RPM, Spindle Taper - CAT 50. EQUIPPED WITH: Heidenhein TNC 430 PA 5-Axis CNC Control, 80 Station Automatic Tool Changer, FPT 360 Degree Universal 3+2 Bi-Rotational Head, FPT LS Extension Head -735 Length, Color CRT Monitor, Travelling Operators Platform, Telescoping Way Covers, High Pressure Coolant System, Full Lenght Chip Conveyor, 3-Station Head Changing Rack, Auxilliary Automatic Tool Changer, 2460 x 10826, T-Slotted Floor Plate (2-pcs), 49.61 HP Spindle Drive Motor, Floor space – 18050 mm x 6350 mm x 5750, Height From Floor Plate to top of Machine – 4500 mm, Depth of Pit-1250.
 
  97
IDMA18138
MakeGiddings & Lewis
ModelH70F
YOM2000
ConditionUnder power
PhotoSee Photo
Spindle dia.175mm,spindle travel(z-axis)1500mm,spindle taper#50,spindle speed range 9 to 2200RPM,spindle motor 107 HP AC spindle drove,with head stock travel(T-axis)3600mm,coloumn travel on runway(x-axis)72000mm,traverse rate(X/Y/Z axes)500/400/600 IPM,equipped with Fida M2 3/1 CNC control on 3 axis movement & 1axis(B)positioning,non metallic way liners,Ball screws on Y&Z axes,back drive on X,hydrostatic ways on X axes, operators platform,chip conveyor,coolent through spindle,60PSI,Ferrand scale feedback for X&Y axes,with rotary table, floor paltes and angle plates two(2) 14'''''''' x 5'''''''' x10" floor paltes & two(2)8'''''''' x 5'''''''' x 10" floor playes, one 3000mm dia.360 deg. positioning Rotary table with 75 tons load capacity,Two(2)3375mm tall x 900mm wide x 1037.5mm deep angle plates.
 
  98
IDMA17928
MakeColgar
Model
YOM
ConditionExcellent
PhotoSee Photo
X 7000 mm, Y 1000 mm, Z 2750 mm, +4 &5 head axis , with Fanuc 15M
 
  99
IDMA17761
MakeGraffenstaden
Model7441ME
YOM1980
ConditionGood condition,under power
PhotoSee Photo
spindle dia 120 mm, X 5000 mm, Y 3000 mm, Z 700 mm, W 750 mm, taper ISO 50,spindle rpm 10 to 1300 rpm / 22 kW,
feeding rate 2.5 to 2000 mm/min (8000 mm/min for the quick mode),
with floor plates / angle head
,Control Philips CNC 3460

 
  100
IDMA17650
MakeMazak,Japan
ModelYMSH25Q
YOM1983
ConditionGood Condition
PhotoSee Photo
Floor plate 5000 x 1500 mm,
X 5000 mm, Y 1525 mm, Z 915 mm,
Quill travel 380 mm,
Toolchanger 40atc,
Max.spindle speed 2200rpm,
Spindle taper ISO50,
Complete with full B-axis table 1000x1000mm,
Power 15/18,5kW,
Control FANUC 6MB
 
  101
IDMA17489
MakeShibaura
ModelBF132A
YOM1990
ConditionGood Condition
PhotoSee Photo
Spindle Diameter 132 mm,
Taper In Spindle ISO 50,
Milling Spindle Diameter 225 mm,
Travel, Y 3500 mm,
Travel, X 9000 mm,
Rotary Table Size 2500 mm x 2000 mm,
Spindle Speed(2) Step 5~800 Rpm,
RAM 1000,
Table Load Capacity 3000 Kg,
Fanuc-15M CNC Control.
 
  102
IDMA17443
MakeGray
Model550F
YOM
ConditionVery good condition
PhotoSee Photo
spindle dia 125 mm, X 9900 mm, Y 3150 mm, Z 800 mm, W 1125 mm, spindle speed 1000 RPM , table size 2400 x 1500 mm, floor plate size 4200 x 1500 x 250 mm, Equipped with:
Delta 20 CNC,
Chip Conveyor,
Hydraulic Clamps on XYZ Axis,
40 HP AC Spindle Motor,
AC Servos
 
  103
IDMA17369
MakeMitsubishi
ModelMAF180
YOM1982
ConditionExcellent condition,under power
PhotoSee Photo
X-6000 mm,
Y-3000 mm(Original 2400, but extended 600 mm,
Rotary Table : 2100x2100 mm,
Traverse (V-Axis) 1000 mm,
Indexing-45,
Spindle dia : 180 mm ,
Travel : 900 mm,
Head Ram Traverse : 660 mm : 1560 mm,
 
  104
IDMA17228
MakePegard
ModelPrecivit 2R
YOM1988 partial OH 2007
Conditionoverhauled
PhotoSee Photo
Table size 7000x1200mm,
Table travel X-axis 7000mm,
Machine Vertical columns travel Y-axis 1800mm,
Spindles travel 1000mm,
Columns travel 1220 and 1600mm,
Spindle diameter 150mm,
With 102 position toolchanger atc

Control SIEMENS 850
 
  105
IDMA16914
MakeSacem
Model
YOM
ConditionGood Condition
PhotoSee Photo
spindle dia 130 mm, X 4500 mm, Y 2500 mm, table 12 tons , 2000 x 1600 mm, table travel 1250 mm, forward 600 mm, CNC Heidenhain
 
  106
IDMA16861
MakeToshiba Japan
ModelBFT130A
YOM1990
Condition
PhotoSee Photo
Spindle dia. 130mm,X-7500mm,Y-3500mm,Z-450 to 1000mm,with Fanuc F-11M control.
 
  107
IDMA15959
MakeRussian
ModelLR241F1
YOM
ConditionReconditioned
PhotoSee Photo
Spindle dia. :175 mm; Dimensions: Lenght 11020mm, Width 8100mm, Height 6000mm, Weight:52200 Kg.; Floor Plates:length=4660 mm, width=4230 mm; Rotary Table:length=2200 mm, width=1800 mm; Table max. travel 2250mm; Z =1240mm, Y=2000mm, X=3200mm; Tailstock travel 1000mm. CNC System Omron.
 
  108
IDMA15657
MakeGiddings & Lewis
ModelG60FCX
YOM1993
ConditionVery good condition
PhotoSee Photo
Spindle Diameter 152 mm,
Spindle Taper, V-Flange #50 CAT,
Travels: X-Axis:10363 mm,
Y-Axis : 1702 mm,
Z-Axis :1219 mm,
W-Axis: 762 mm,
Spindle Speeds, Infinitely Variable 12 to 2500 RPM,
Feed Ranges, (X, Y, W, & Z Axis'): .010 to 150 IPM,
Rapid Traverse Rate, (W & Z Axis') 300 IPM,
Rapid Traverse Rate, (X-Axis)400 IPM,
Rapid Travese Rate, (Y-Axis)450 IPM,
Spindle Motor, Horsepower 30 HP,
Electrical System 460/3/60,
Overall Height, Floor to Pendant 5791mm,
Weight Approximately 145000 LBS.
Giddings & Lewis Numeripath #8000M CNC Controls.
Equipped With:
Swinging Pendant Design (Vertically Adjustable)
w/386 SXPC, 14" Color VGA, 52MB, 4MG Ram, 101 Key,
IBM Keyboard, 1000' Program Storage,
40-Positon Stand-Alone Automatic Tool Changer,
(10" Dia, 24" Long, 90 LB Maximum Tool Capacity),
Hydrostatic Rear Support - Hydrostatic X-Axis Ways,
Live Spindle - Power Draw Bar (Collet Type),
Replaceable Hardened Ways On Cross Slide,
Hardened Column Ways - Electric Servo Drives,
Ball Screws On Y, W, And Z Axis',
High Pressure Flood Coolant System Thru The Spindle,
Trabon Lubrication System On Headstock & Cross Slide,
Lubri-Cool Chiller For Lubrication System,
Thermal Compensation Of Z-Axis - Numeri Probe Gauging,
Twin Anti-Baclash X-Axis Servo Motors,
Hydraulic Counterbalance - 60" Wide Runway,
Metal Roll-Up Runway Covers - Manuals.

 
  109
IDMA15581
MakeToshiba Japan
ModelBSF24/15NC
YOM1969/2001
ConditionDismantled
PhotoSee Photo
Spindle Diameter 150 mm,
Quill Diameter 381 mm,
Milling Spindle Diameter 240 mm,
Spindle Taper #50
Travels:
X-Axis 10000 mm,
Y-Axis 4000 mm,
Z-Axis 1067 mm,
Quill Travel, Z-1 Axis 813mm,
Total Axial Travel Quill and Spindle 1880 mm,
Spindle Speeds (Inf. Variable)3-600 RPM,
Facing Head Feeds 0.020-31.5 IPM,
Rotary Table:
Toshiba Model: BR 20/25A TSF (Manual),
Table Size 1829 x 2540 mm,
Table Infeed 1500 mm,
Table Weight Capacity 20 Ton,
Controls Pendant,
Rotation Power,
Overall Height Base to Table Top 899 mm,
Measuring System Optical,
Machine Equipped With:
GE/Fanuc 210i 3-Axis CNC Control,
GE/Fanuc 2050 Touch Screen,
42" Diameter Facing Head,
Right Angle Head with 18" Reach,
Spindle Support,
(4) 62.99" x 118.11" x 15.74" T-Slotted Floor Plates,
(1) 72" x 100" x 18" T-Slotted Set Up Table,
Independent Hydraulic Servo Drives,
Ball Screws on Y & Z Axes,
Dual Pinion and Rack Drive System X-Axis,
Hardened & Ground Ways,
Sliding Steel Way Covers X-Axis,
Hardened Ways on Bed & Column.
 
  110
IDMA15498
MakeMitsubishi
ModelMAFRS150
YOM1981/2004
ConditionVery good condition
PhotoSee Photo
Spindle Diameter 150 mm,
Milling Spindle Diameter 210 mm,
Travels:
X 6000 mm,
Y 2500 mm,
Z 900 mm,
Spindle Taper #50,
Ramstock Travel, Z-2 700 mm,
Total Axial Travel 1600 mm,
Spindle Speeds (3-Ranges) 10-1400 RPM,
Eqipped With:
Fanuc 16MB CNC Control (Retrofit 2004),
Fanuc Motors & AC Drives,
Ballscrews on Y, Z1 & Z2,
Steel Sliding Way Covers on X-Axis,
Bellow Type Way Covers on Y-Axis,
Complete Documentation on Retrofit,
40 HP Spindle Motor,
ROTARY TABLES:
(1) 63" x 63" Mitsubishi CNC Infeeding Rotary Tables,
Model: DiTJ 16 x 16,
Weight Capacity: 33,000 LBS,
39.37" Table Infeed,
Floor Space Including Rotary Tables: 9144 mm (D) x 13106 mm (L) x 6400 mm (H)
 
  111
IDMA15488
MakeParpas
ModelML90-4000 3+2 Universal Head
YOM2001
ConditionGood Condition
PhotoSee Photo
Y 2500 mm,
X 3937 mm,
Z 984.25 mm,
Ram Cross Section 442.75 x 393.75 mm, Feed Rate, Rapid 400 IPM ,
Feed Rate, Working 200 IPM
Spindle Speeds 10-5000 RPM
Torque 700 Nm
Constant Torque Range 10-400 RPM
Constant Power Range 400-5000 RPM
Spindle Taper ISO 50 (CAT 50 Taper)
Tool Changer Maximum Weight Capacity 44 Lbs
CNC UNIVERSAL HEAD (2-Axis CNC)
Indexing Positions 144
C-Axis, Parallel to Ram Face +/- 180 degrees
C-Axis Increments 2.5 degrees
A-Axis, 45 degrees from Ram Face +/- 180 degrees
A-Axis Increments 2.5 degrees
INFEEDING ROTARY TABLE: (2-Axis CNC)
Table Size 1722.5 x 1968.5 mm,
Table Rotation, B-Axis 001 360,000 Pos
Table Weight Capacity 33,000 lbs
Table Infeed, W-Axis 1476.5 mm,
Maximum Rotation Rate 2 RPM
Positioning +/- 0.002 Degrees

EQUIPPED WITH:
SELCA 3045 PD (Heidenhain) CNC Control (7-Axis)
Remote Handwheel and Ethernet Connection
60 Station Automatic Tool Changer
High Pressure Thru-Spindle Coolant System, 150 PSI
Heidenhain Absolute Positioning Linear Scales
Ridgid Tapping














Power Draw Bar, Pull Stud Type
Hardened Steel Slideways
Hydro-Pneumatic Compensation Counter Balance System
(2) 78.74" x 59.06" T-Slotted Floor Plates
Full Length Automatic Chip Conveyor
Operators Platform
Roll Up Way Covers on Y-Axis
Telescopic Steel Way Covers on X & W Axis
Paper Filtration System
30 HP Spindle Motor
Selca 3045 PD 7-Axis CNC Control
 
  112
IDMA15399
MakeGraffenstaden
Model
YOM
ConditionGood Condition
PhotoSee Photo
X-axis: 8000 mm,
Y-axis (table/column): 800 mm,
Z-axis: 2000 mm,
Milling spindle taper (ISO): ISO 50,
Spindle power: 18.5 kW,
Spindle speed range: 32 - 1600 rpm,
Digital read-out (1) CNC(2): (2) NUM 760 CNC,
Rotary table dimensions: 8000 x 1500 mm,
Length L -- R: 9320 mm,
Head: 2 x 360° (12000 kg).
 
  113
IDMA15360
MakeWotan,West German
ModelRapid3K
YOM1993/2000
ConditionVery good condition
PhotoSee Photo
Spindle diameter : 160 mm,
X-travel : 7000 mm,
Y-travel : 3500 mm,
Z-travel : 1000 mm,
W-axis: 900 mm,
Rotary table: 2500 x 2000 mm,
Table load : 20 t,
Table adjustment - longitudinal : 1000 mm,
B-axis : 360°,
Spindle taper : ISO 50,
Spindle turning speed - stepless : 2 - 2500 U/min,
Feed speeds infinitely variable : 1 - 5000 mm/min,
Rapid traverse : z-16, x-y-w- 20 m/min,
Total power requirement : 125 kW,
Weight of the machine ca. t,
Dimensions of the machine : 13,2 x 12,8 x 6,5 m.
Generally overhauled in 2000 with new electric, motors and CNC SIEMENS 840 D,
CNC Siemens 840 D,
Arostatic guideways, hydrostatic spindle bearing,
Rotary table generally overhauled in 2007,
8o-pockets automatic toolchanger,
Automatic headchanger,
4 x 90° angular milling head,
Chip conveyor, spindle support bearing,
Trough spindle coolant 17,5 / 4,4 bar.
 
  114
IDMA14956
MakeGraffenstaden
Model
YOM1980
ConditionGood condition,under power
PhotoSee Photo
Spindle dia 120 mm, X 5000 mm, Y 3000 mm, Z 700 mm, W 750 mm, spindle taper ISO 50, Spindle RPM 10 to 1300 rpm/22Kw, feeding rate 2.5 to 2000mm/min(8000 mm/min for the quick mode, with floor paltes, angle head,with CNC Pilips 4 axes model 3460.
 
  115
IDMA14840
MakeStanko-Russia
ModelLR212
YOM1990
ConditionPerfect Condition
PhotoSee Photo
Spindle dia 200 mm,
table dimensions 6000 x 3000 mm,
working dimensions X 5000 mm, Y 2000 mm, Z 600 mm
precision o,o1 mm,
max load on table 10 tons, with copying system, CNC Holland

top