Category : Boring Mills

Sub-Category : Borer Horizontal Ram Type CNC

Total Machines Found : 61

Select | Machine Details
 
  1
IDMA34029
MakeTos ,Varnsdorf
ModelWHQ13.8
YOM
ConditionVery good condition
PhotoSee Photo
SPINDLE SIZE: 5.11"
SPINDLE TAPER: ISO 50
X-AXIS: 137.8"
Y-AXIS: 98.4"
Z-AXIS:49.2"
W-AXIS:31.5"
POWER:61 HP
RPM:2,500 RPM
TABLE-W:70.8"
TABLE-L:70.8"
MAX TABLE LOAD:26455 LBS
RAPID TRAVERSE (X/Y/Z/W):315 IPM
CONTROLCNC: (HEIDENHAIN TNC 430)
WEIGHT:83775 LBS

DESCRIPTION:
Tos Varnsdorf WHQ 13.8 CNC Horizontal Boring Machine, TSC, Angle Head, Tool Changer, Heidenhain TNC 430

EQUIPPED WITH:
Coolant through spindle
Angle head
Tool changer
 
  2
IDMA33834
MakeSkoda Czech
ModelW200HNC
YOM1991
ConditionGood Condition
PhotoSee Photo
SPINDLE DIAMETER 200
RAM 520X 520 mm
CONE ISO 60
DISPLACEMENT Y-axis 3000mm
DISPLACEMENT (X-AXIS) 6000mm
DISPLACEMENT (Z-1 AXIS) 1500 mm
SPINDLE EXTENSION (Z-2 AXIS) 2000 mm
VARIABLE SPINDLE SPEED from 0 to 700 rpm
SPINDLE SPEED RANGE 4
Bed width 2000 mm
TELESCOPIC PROTECTION
OPERATOR'S PLATFORM
CORNER HEADS
ENGINE ON SPINDLE 100 HP
TABLE 3500Х4000 MM 100 TONS
 
  3
IDMA32993
MakeSKODA
ModelW200HC
YOM1993
ConditionGood Condition
PhotoSee Photo
Diameter ext spindle: 200mm.
Control: NUM 760F
axis displacement: X: 11500mm, Y: 3150mm, Z: 1000mm, W: 1000mm
spindle speed 600 / min.
Dimensions of the 2 rotary tables:
- 2500x4000, it is independent of the CN, admissible weight 90 T
-2000x2500 it is controlled by the CN, weight 25T
 
  4
IDMA32722
MakeSKODA
Model
YOM2008
ConditionGood Condition
PhotoSee Photo
General :
Control : Siemens Sinumerik 840D
Spindle Diameter : 225 mm
Spindle Taper : ISO 50/60
Ram Dimension : 520x520mm
Travels :
x= Column Horiz. On Bed 20.000 mm
Y= Headstock Vert. on Column : 6000mm
Z= Ram Axial Travel : 1.600 mm
W= Spindle Axial Travel : 1.400 mm
Spindle :
Max Spindle Speeds : 1600 RPM
Feed rate X+Y : 0,5-15.000 mm/min
Feed rate W+Z : 0,5 - 15.000 mm/min
With:
Milling Heads Traveling Platform
Bedway Covers X+Y
Floorplates :
Area 1: 18,500 x 3.750
Area 2: 1.900 x 3.750
CNC Rotary Table :
Make : Skoda
Centric Loading Capacity : 100 T
Size of clamping plate : 4.000x3.550 mm
width of clamping 'T'- Slots :
250
Total height of table : 1.430mm table slide displacement along bed (axis 'V') : 2.000mm
Rapid traverse : 6.000 mm/min
Total weight of table : 49T
 
  5
IDMA32368
MakeWaldrich Siegen
Model
YOM1978/2007
ConditionGood Condition
PhotoSee Photo
spindle dia 200 mm
x-travel 15000 mm
y-travel 5000 mm
z-travel 1500 mm
spindle motor 75 kW
w-axis 1200 mm
spindle taper ISO 60
spindle turning speed range -800 U/min
ram head dimension 600 x 0750 mm
feed in x - axis -3 m/min
feed in y - axis -1,2 m/min
rapid travel - X/Y/Z 6000/3000/3000 mm/min
total power requirement -- kW
weight of the machine ca. 350 t
dimensions of the machine ca. 26,0x17,0x15,2 m
Accessories:
SIEMENS 840C CNC-Control Rotary table 5200 mm dia., 100to load, V-Axis 3300 mm, 6x floor
plates 5000 x 2000 x 350 mm, X-axis -hydrostatic, Universal-, Angle- and Facing Heads (controlled),
bore bar, 90x tool changer, HEIDENHEIN scales, coolant, chip conveyor etc.
 
  6
IDMA32367
MakeInnocenti
Model
YOM19/2008
ConditionGood Condition
PhotoSee Photo
spindle dia 200 mm
x-travel 16000 mm
y-travel 5000 mm
z-travel 2000 mm
w-axis 900 mm
spindle turning speed range -800 U/min
spindle taper BT 50
milling spindle 305 mm
rapid travel range -4 m/min
power capacity - grinding motor 75 kW
total power requirement ---- kW
weight of the machine ca. ---- t
dimensions of the machine ca. ---- m
Accessories:
Fanuc 16i MB CNC-control - retrofit 2008 Rotary Table 3000 x 3000 mm,load 50 t,travel 1500 mm
Heidenhain Scales (x,y,z,w,b,v) Milling Head 3 sets, Worm Rack on X Axis, Vickers Hydraulics,
Operator Platform Floor Plate 2000 x 4000 mm x 6 pcs Steel Way Covers, Chip Conveyor
 
  7
IDMA32202
MakeTITAN PAMA
ModelAFP200
YOM1984 rebuilt in 2010
ConditionGood Condition
PhotoSee Photo  |  See Video
spindle diameter 203,2 mm
x-travel 9000 mm
y-travel 4000 mm
milling spindle diameter 335 mm
spindle taper ISO 60
spindle turning speed - stepless 1 - 350 / 5 - 1200 U/min
w-axis 800 mm
z-axis 1200 mm
z + w axis 2000 mm
rapid traverse X-axis 8000 m/min
rapid motion - y-axis 6000 mm/min
Rapid motion z/w 4000 mm/Min.
Feed column (X-axis) 1 - 8000 mm/min.
Feed head stock (Y-axis) 1 - 6000 mm/min.
Infeed z/w 1 - 4000 mm/Min.
dimension of the ram 530 x 600 mm
engine output 75 kW
dimensions 16 x 5,5 x 8,1 m
total power requirement 165 kW
weight of the machine ca. 130 t
Hydrostatic guideways in X-, Y- and W-axes
Control: CNC Sinumerik 840 D
Accessories
Telescopic cover for bed (X-axis)
Cumulated Z- and W-axes
Levelling shoes
Platform (Y-axis)
 
  8
IDMA32046
MakePAMA
ModelAFP200
YOM1985-87 And Overhaul Was Done In 2007
ConditionGood Condition
PhotoSee Photo
- Boring spindles diameter: 200 mm
- Boring spindles taper: ISO-50
- Boring spindles speed: 1500 rpm
- Main motors power: 100 kW
- Rams section: 530 x 600 mm
- Max. machining length: 19200 mm
- Column 1 max. travel (X1 axis): 12800 mm
- Column 2 max. travel (X2 axis): 12800 mm
- Headstock 1 travel (Y1 axis): 4000 mm
- Headstock 2 travel (Y2 axis): 5000 mm
- Boring spindle travel (Z axis): 1100 mm
- Ram travel (W axis): 900 mm
- Travel Z + W: 2000 mm
- Feeds on X, Y and Z axis: 0 8.000 mm/min
- Feed on W axis: 0 6000 mm/min
- Approx. weight without fix and rotary tables is about 210 t
NOTE:
1. The max working extension of Z axis without ram (W axis) is 1100 mm.
2. The machine will work as a tandem unit and totally independent columns as well.
STANDARD EQUIPMENT:
- GE FANUC 16i-MB CNC
- GE FANUC servo / spindle motors and drives
- HEIDENHAIN linear measuring system on X, Y axis;
- HEIDENHAIN rotary encoder on W axis;
- GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment
- ATOS, MP FILTRI, MARZOCCHI hydraulic equipment
- METAL GENNARI telescopic covers on X axis
- METAL GENNARI chip conveyor
- Universal milling head (manual) type TU-80 2 pcs.
- Fix tables 6000x2000 mm 6 pcs.
- Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) 1 pc.
- Displaceable rotary table type MRD 2000x2400/2500 mm (30 tones) 1 pc
 
  9
IDMA28882
MakeSkoda Czech
ModelW200
YOM2005
ConditionGood condition,under power
PhotoSee Photo
Spindle dia : 200 mm,
X-travel 20500 mm,
Y-travel : 5500 mm,
W-travel boring spindle stroke : 1400 mm,
Z-travel ram stroke : 1600 mm,
W- + Z-Weg (Spindle- + ram stroke) : 3000 mm,
Ram cross section : 520 x 520 mm,
Taper in the spindle ISO : 60,
Spindle speed : 1 - 1600 rpm,
Steps 3
Torque of boring spindle : 12000 Nm,
Torque of milling spindle : 16000 Nm,
Feed speed X/Y/Z Axes : 8000/8000/10000 mm/min,
Feed speed W-Axis : 10000 mm/min,
Feed force X/Y/Z on 100% ED 60000 N,
Feed force W on 100 % ED 50000 N,
CNC rotary table : 6000 x 4000 mm,
Travel of table : 2000 mm,
Max. table load : 80000 kg,
Input - Spindle motor : 100 kW,
Total input : 135 kVA,
Accessories :-
Milling and boring unit IFVW 102.
Max. spindle speed : 1600 rpm.
Torque : 2600 Nm.
Output : 55 kW.
Universal angle head IFVW 207.
Max. speed : 1600 rpm.
Max. torque by 200 rpmn : 2600 Nm,
Output by 200 rpm : 55 kW,
Stand palett for IFVW 102 and stand for IFVW 207.
Floor plates field : 12600 x 4000 mm,
With Siemens 840D with new headstock.
 
  10
IDMA28570
MakeTITAN PAMA
ModelAFP200
YOM1985/2008
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 203 mm,
Travel X : 9000 mm,
Travel Y : 4000 mm,
Z axis : 1200 mm,
W axis : 800 mm,
Z axis: 1200 mm,
Total Stroke : 2000 mm,
Milling spindle diameter: 335 mm,
Spindle speeds: stepless 1-350/5-1000 RPM
Dimension of the ram : 530 x 660 mm,
Spindle turning speed range : 1-660 U/min,
Feeds X axis : 2-2000 mm/min,
Rapid traverse Z axis : 4 m/min,
Spindle motor : 71 kW,
Max torque on the spindle : 42000 Nm / 180 kVA,
Spindle taper ISO : 60,
Dimensions of the machine ca : 18,0 x 6,0 x 10,6 m,
Weight of the machine : 182 t.
Control : SIEMENS 840 D FOR 4 axis.
With new motors,
Drive control,
Switching cabinet,
Measuring system,
Hydrostatic guideways and spindle,
9 floor plates with 3000 x 1500 mm each,
Angular milling head,
2 clamping angles ca : 1000 x 1000 x 3000 mm,
Dust exhauster,
Prismatic roller steady.
 
  11
IDMA28552
MakeSkoda Czech
ModelW200HA
YOM2000
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X travel: 10,500 mm,
Y travel: 5500 mm,
W travel: 2000 mm,
Z travel: 1600 mm,
Spindle speed: 0,0-930 U/min,
Spindle power: 77 KW,
Spindle details: DIN 2080 AD, ISO 50,
Control: Siemens 840 CE
 
  12
IDMA28551
MakeSkoda Czech
ModelW200HB
YOM1991
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X travel: 12500 mm,
Y travel: 5000 mm,
W travel: 2000 mm,
Z travel: 1600 mm,
Spindle speed: 0,0-930 U/min,
Spindle power: 77 KW,
Spindle details: DIN 2080 AD,ISO 50,
Control: Siemens 880 CE
 
  13
IDMA28550
MakeSkoda Czech
ModelW200HA
YOM2003
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X travel: 8000 mm,
Y travel: 5150 mm,
W travel: 2000 mm,
Z travel: 1600 mm,
Spindle speed: 0,0-800 U/min,
Spindle power: 77 KW,
Spindle details: DIN 2080 AD,ISO 50,
Control: Siemens 840 C
 
  14
IDMA28549
MakeSkoda Czech
ModelW200HC
YOM2005
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X travel: 20000 mm,
Y travel: 5500 mm,
W travel: 1400 mm,
Z travel: 1600 mm,
Spindle speed: 0,0-600 U/min,
Spindle power: 77 KW,
Spindle details: DIN 2080 AD,ISO 50,
Control: Siemens 840 D
 
  15
IDMA28548
MakeSkoda Czech
ModelW200HA
YOM1999
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X travel: 8000 mm,
Y travel: 4150 mm,
W travel: 2000 mm,
Z travel: 1600 mm,
Spindle speed: 0,0-930 U/min,
Spindle power: 77 KW,
Spindle details: DIN 2080 AD,ISO 50,
Control: Siemens 840 CE
 
  16
IDMA28403
MakePama Italy
Model
YOM1975 (reconditioned in 1997)
ConditionGood Condition
PhotoSee Photo
Spindle dia.: 203 mm,
Spindle taper: ISO 50/60 (Big Plus),
X-Axis : 16,000 mm,
Y-Axis : 6,000 mm
Z-Axis : 1,330 mm,
W-Axis : 830 mm,
Total Axial Travel, Ram & Spindle : 2,160 mm,
Ram Cross Section : 530 mm x 600 mm,
Spindle Speeds : 1-680 RPM,
PAMA CNC INFEEDING B-Axis ROTARY TABLE :
TABLE SIZE : 5000 mm x 5000 mm,
Table Infeed V-Axis : 2,500 mm,
Table Rotation : 360,000 Position
Table Weight Capacity : 120 Tons
EQUIPPED WITH :
FANUC 31 i M CNC Controls
Chip Conveyor
T-slotted Floor Plate 4000mm x 15000mm
75HP Spindle Motor
 
  17
IDMA28379
MakeSkoda Czech
ModelW200
YOM1988/Retrofited in 2005
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X/Y/Z/W: 8000 x 3150 x 1600 x 1600 mm,
Rotary table:3150 x 3150 load 45 ton,
Spindle speed: 1000 rpm,
Floor plate size: 6000 x 2000 mm,
With CNC selca,
With siemens drive.
 
  18
IDMA28342
MakeStanko-Russia
ModelHC212
YOM1985 Retrofitted 2007
ConditionGood condition,under power
PhotoSee Photo
Spindle dia : 220 mm,
ISO 60,
Travel X : 12000 mm,
Travel Y : 5000 mm,
Z : 1000 mm,
W : 1500 mm,
Floorplates area : approx. 13000 x 5000 mm,
With lot of Accessoires.
Machine weight : 220 ton incl. Accessoires.
Control : NC310 ( Russia ).
 
  19
IDMA28317
MakeTos Czech
ModelWRD150Q
YOM2002
ConditionGood Condition
PhotoSee Photo
Spindle dia: 150 mm,
Cross section of ram: 450 x 450 mm,
Main motor: 90 kW,
Spindle taper: 50 ISo,
Revolutions: 10-2.500 rpm,
X axis (column on bed)
X axis: 6000 mm,
Feeds: 1-15000 mm/min,
Rapid feed: 15000 mm/min,
Y axis (milling head vertical)
Y axis: 3000 mm,
Feeds: 1-15000 mm/min,
Rapid feed: 15000 mm/min,
W axis (boring spindle)
Z axis: 800 mm,
Feeds: 1-10000 mm/min,
Rapid feed: 10000 mm/min,
Z axis (ram)
W axis: 1000 mm,
Feeds: 1-15000 mm/min,
Rapid feed: 15000 mm/min,
CNC rotary table make Schiess TDV 3
Clamping area; 3200 x 2750 mm,
Longitudinal travel way: 2000 mm,
Max. work piece weight: 60000 kg,
Control: Siemens Sinumerik 840 D,
Accessories
ATC with 80 pockets,
RAA changing attachment
Inner cooling device,
chip conveyor
 
  20
IDMA28305
MakeScharmann
ModelW160
YOM1982
ConditionGood Condition
PhotoSee Photo
Spindle diameter: 160 mm,
X (longitudinal): 6000 mm,
Y (vertical): 3000 mm,
Spindle travel: 900 mm,
Ram travel: 900 mm,
Section of the ram: 400 x 400 mm,
Tool taper: ISO 50,
Spindle stroke total: 1800 mm,
Spindle power: 52 kW,
Spindle speed (1/min): 5-100 rpm,
3 pieces floor plates: 1500 x 6000 mm,
Control: CNC Siemens 810.
 
  21
IDMA28248
MakeColgar
ModelFRAL400
YOM2007
ConditionGood Condition
PhotoSee Photo
Spindle dia: 400 mm,
X axis (column longitudinal: 12000 mm,
Y axis (head stock vertical): 4500 mm,
Z axis (Ram longitudinal): 1500 mm,
W axis (quill): 900 mm,
Max. feed rate (X,Y,Z,W): 0-20000 mm/min,
Hydrostatic guidways on X,Y and Z axis
Working unit
Profile ram: 410 x 505 mm,
Spindle speed: 5-3000 rpm,
Power 100/60% ED: 60/800 kW,
Torque: max.4000 Nm,
Tool magazine
Magazine type: chain magazine
Number of tool places: 160
Tool taper: SK50,
Orthogonal NC-milling head Tabe 80
Tool taper: ISO 50
Power max. S1/S3: 20/40 kW,
Speed max: 2000 min-1,
torque max: 800 Nm,
Indexing swivelling axes: +/-105 x 1 degree + 360 x x1 degree
Coolant through spindle centre 25 bar,or by external nozzle ring 4 bar,
Angle -milling TSQ 110L
Tool taper: ISO 50,
Power max. S1/S3: 29/40 kW,
Speed max: 2000 min-1,
Torque max: 1100 Nm,
Swivelling carriage: 144 x 2,5
Internal coolant conveyance through spindle centre 25 bar, or by external nozzle ring 4 bar
Dimensions: length/width/height ca: 20.000 x 11.000 x 8.900 mm
weight ca: 65.000 kgs
voltage: 400 V, 50 Hz
Control: Sinumerik 840 D
Accessories:
Milling head change system, 1 piece orthogonal NC milling head TABR 80, 1 piece angle milling
head TSQ 110 l, hydrostatic guidances on X-, Y- und Z-axis, electronical hand wheel, 3-D-touch
probe, chip conveyor, floor plate 11.000 x 4.000 x 300 mm, coolant equipment, operator platform
vertical moveable, CE-conform machine covering,
with automtical function on front-sliding doors height 2.400 mm.
color : RAL 5005 Blau
 
  22
IDMI6267
MakeWMW Union ,Germany
ModelPC130
YOM
ConditionGood Condition
PhotoSee Photo
Boring Spindle
Diameter: 130 mm,
Drive power max: 46 kW,
Max. torque: 2179 Nm,
Spindle taper: ISO 50/SK50,
Speed range: 5...3000 rpm,
Traverse
Column cross traverse X axis: 9500 mm,
Head stock vertical traverse Y axis: 3000 mm,
Column longitudinal traverse Z axis: 800 mm,
Boring spindle axial traverse W axis: 700 mm,
Rotary table longitudinal travers V axis: 1500 mm,
Rotary table rotation B axis: 360 degree,
Feed Range
For all axes: 1-15000 mm/min,
Rapid traverse: 15000/min,
Rotary Table
Table size: 2500 x 2000 mm,
Load capacity: 25000 kgs,
Universal Milling Head
Auto positioning with tool clamping: 360 degree,
Chip Conveyor
Automatic full length: 12000 mm,
Coolant System
Through spindle + 3 external nozzles: 20 Lpm,
Boring Bars and Cutters: 40 nos,
Control: Heidenhain TNC 430
 
  23
IDMA28177
MakeScharmann
ModelWFT160
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia: 160 mm,
X travel: 4800 mm,
Y travel: 3000 mm,
Control: Siemens Sinumerik CNC Control.
 
  24
IDMA27853
MakePoreba Poland
Model200
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X travel: 10000 mm,
Y travel: 5500 mm,
Z travel: 1200 mm,
W travel; 1450 mm,
Spindle taper: ISO 60,
Spindle motor: 88 kW,
Spindle speed: 4000 RPM,
Ram size; 750 x 550 mm,
Total weight of machine (without floorplates): 140 ton,
Control: Num 1040 CNC,
Rotary Table:
Dimensions turntable: 2000 x 2000 mm,
Max. weight on table: 30 ton,
With heidenhain difital readout,
6 floorplates included,
1 flootplate: 7000 x 2000 mm,
Each floorplate has 5 t slots of 45
Total floorplate dimensions; 14000 x 6000 mm,
With 4 milling heads included:
-universal huron milling head,
-double universal huron milling head,
-high speed milling head (capto C8/HSK-22kW-300Nm- cooling through spindle)
-90 deg milling head
Full retrofit with geometric + new control in 2008
New Siemens drives & motors,
New Heidenhain measuring system.
 
  25
IDMA27680
MakePama Italy
ModelSpeedram2000
YOM2010/2011
ConditionGood condition,under power
PhotoSee Photo
Spindle diameter : 160 mm,
X axis : 20000 mm,
Y axis : 5000 mm,
Z axis : 1200 mm (together with W : 2200 mm),
65 t, 4000 x 4000 mm table with 1500 mm V-axis,
Floor plates : 15000 x 4000 mm
120 pos ATC,
Milling head : 2-axis cnc,
Agular milling head,
Chip conveyor.
Heidenhain iTNC 530 control.
 
  26
IDMA27642
MakeSkoda Czech
ModelWD160B
YOM1972 / Retrofitted 1997
ConditionGood Condition
PhotoSee Photo
2 Machines on 1 bed of 23,000 mm.
Spindle diameter : 160 mm,
X Travel : 23000 mm,
Y Travel (1 machine) : 4182 mm,
Y travel (2 machine) : 3182 mm,
Spindle travel : 1600 mm,
Rotary Table Size : 2500 x 2500 mm (20 Ton),
Floor Plates : 20000 x 4800 mm,
With lot of accessories,
12 milling heads,
20 floor plates,
1 rotary table 2500 x 2500,20 ton
4 metal brackets,
toolings
Control : CNC Fagor.
 
  27
IDMA27346
MakeWotan,West German
ModelRapid5
YOM1985-2000-2010
ConditionGood Condition
PhotoSee Photo
spindle diameter: 160 mm,
Spindle: 0-1.800 RPM,
Spindle: SK 50 Din 69871,
X axis: 16000 mm,
Y axis: 4455 mm,
W axis: 900 mm,
Z axis; 800 mm,
Ram: 360 x 360 mm,
Boring spindle: ISO 50,
Milling spindle: 280 mm,
Feed (X,Y,Z,W axis): 1-5,000 mm/min,
Rapid speed (X,Y,Z,W-axis): 5000 mm/min,
Machine length: 21,980 mm,
Machine width: 4,380 mm,
Machine height: 8700 mm,
Machine weight: approx.75 ton,
Control: Heidenhain TNC 430.
Automatic tools changer Kelch
Number of tolls: 72 pc,
Diameter: 315 mm,
Length; 500 mm,
weight: 40 kg,
with manual angular milling head original Wotan.
The machine was permanent retrofitted and upgraded during the last several years:
In 2000
Complete new electric and CNC control by Heidenhain TNC 430 incl. axe motors,linear scales cabling, switch cupboard etc.
In 2004
The beds were new grind/polished the aerostatic guidance of the column on the bed was upgraded with a double pocket system which improve the guidance into a redundant system.
The Y axe guidance was reconditioned and all air nozzles were replaced.
In 2008
The spindle head was modernized and redesigned.
The hydrostatic spindle bearing was replaced by a roller bearing.
This was the basic to upgrade the spindle speed from 1100 rpm to 1800 rpm,
The main drive was replace by an asynchronous motor make Kessler.
All bearings in the gearbox were replaced.
The spindle was redesign for to tapers SK 50 DIN 69871 and DIN 69872.
In 2010
The counterbalance system is hydraulic design.The pressure tank of the system was new valid by the TUV/Dekra. Next inspection will be in 2020.
In 2014
Reconditioning of the saddle.The sliding surface were complete new machined an aligned incl.of changing of the aerostatic nozzles. Al bed wiper are new.
The oil cooling unit was checked and reconditioned.
 
  28
IDMA27299
MakeWotan,West German
ModelRapid5
YOM2004
ConditionGood Condition
PhotoSee Photo
Spindle diameter: 160 mm,
X stroke: 10,000 mm,
Y stroke: 3,800 mm,
Z stroke: 700 mm,
W stroke: 700 mm,
Tool taper: ISO 50,
Speeds: 1,25-1250 rpm,
Feeds: 1-5000 mm/min,
Rapid feeds: 5 mtr/min,
Total power: 120/spindle 83 kw,
Length: 14,500 mm,
Width: 3850 mm,
Height; 7360 mm,
Weight: 62,300 kg,
Control: Heidenhain iTNC 530,
With Rotary Table and floor plates at extra cost.
 
  29
IDMA27238
MakeSchiess Froriep
ModelFB180
YOM1973
ConditionGood Condition
PhotoSee Photo
Spindle dia : 180 mm,
Travel :
X axis : 12500 mm,
Y axis : 5500 mm,
Ram diameter : 340 mm,
W axis ram travel : 800 mm,
Z axis spindle stroke : 1400 mm,
Length of the bed : 17000 mm,
Width of the bed : 2000 mm,
Height of the bed : 500 mm,
Spindle rapid : 0,2-6000 mm/min,
Spindle speed stepless : 2200 rpm,
1. step : 1.25-32.5 -73 U/min,
2. step : 170 U/min,
3. step : 390 U/min,
4. step : 900 U/min,
Spindle feed : 0,2-3000 mm/min,
Spindle taper : ISO 60,
Spindle power : 74 kw,
Milling spindle diameter : 220 mm,
Milling spindle flange diameter : 290 mm,
Head stock width guide to the stand : 1400 mm,
Main motor : 101 kw,
Power : 380 V 5%,
Frequency : 50 Hz,
Control : CNC Heidenhain 415.
 
  30
IDMA27082
MakeWotan,West German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle : 180 mm,
X travel : 13000 mm,
Y travel : 4500 mm,
Z travel : 1000 m,
W travel : 900 mm,
Ram size : 420 x 420 mm,
Floor plate : 2000 x 6000 mm (4EA),
Rotary table : 2200 x 3200 mm (Manual),
Control : Fanuc 18 imb
 
  31
IDMA27055
MakeSaint Etienne
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia : 130 mm,
Nose spindle : ISO50,
Travel (X) : 9000 mm,
Travel (Y) : 3000 mm (vertical),
Travel (Z) : 800 mm (RAM),
Travel (W): 600 mm,
Size RAM: 300 x 325,
Table : 3000 x 5500 mm - Loading 50 tons,
Travel table: 2700 mm,
Rotary spindle: 800 tr/min - Gear box: 4,
Power spindle 37 Kw,
With milling head,
Control : CNC NUM 1040.
 
  32
IDMA26956
MakeBerardi
Model160
YOM1982
ConditionGood Condition
PhotoSee Photo
2 Machines on on 1 column
X travel : 12,500 (each machine),
Y travel : 2500 mm,
Z travel : 600 mm,
W travel : 750 mm,
Spindle dia : 160 mm,
Diameter of flange spindle : 250 mm (ACME),
Diameter of front bearings : 240 mm,
ATC : 64 Tools,
Tool Change time : 20 sec,
Total Power : 127.5 kW,
Rotary Table : 2200 x 2200 mm (2 Units) + 2200 x 2050 mm (1 Unit),
Feeds :
-Axes : 0-2000 mm/minute,
-Accelerated travel X,Y,W : 5000 mm/minute,
-Accelerated travel Z : 3000 mm/minute,
Accuracy :
X,Y,W : +/-0.015 mm,
-Z : +/- 0.030 mm,
Weight : 280 t,
CNC Russian made Mayak 500.
 
  33
IDMA26925
MakeJuaristi
ModelMX7
YOM2002
ConditionGood Condition
PhotoSee Photo
X travel : 8000 mm,
Y travel : 3000 mm,
Z travel : 1500 mm,
Ram section : 460 x 520 mm,
Speed range 2,
Speeds : 3000 rpm,
Motor : 37 Kw,
Control : CNC Fagor 8055
 
  34
IDMA26862
MakeSkoda Czech
ModelWD200
YOM1975
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 200 mm,
X travel : 8000 mm,
Y travel : 4000 mm,
Z travel : 1740 mm,
Z 1 travel : 1550 mm,
W travel : 1000 mm,
Table size : 2000 x 1800 mm,
Floor plate : 8000 x 4200 mm,
With one milling head (maybe two),
Siemens CNC Control.
 
  35
IDMA26828
MakeTos Czech
Model
YOM2008
ConditionExcellent condition,under power
PhotoSee Photo
Spindle dia : 150 mm,
X travel : 18000 mm,
Y travel : 3500 mm,
Z travel : 1000 mm (ram),
Spindle stroke : 800 mm,
Ram size : 450 x 450 mm,
Speeds : 10-2500 rpm,
Rotary table : 16 t (2000 x 2500 mm), V- 1400 mm,
With 60 ATC,
With floor plates,
Automatic head + manual head,
pick up for heads,
Cooling through spindle,
Chip conveyor,
Angle tables, tooling etc,
Control : Heidenhain iTNC530.
 
  36
IDMA26726
MakeColgar
ModelFRAL300
YOM2006
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 140 mm,
Travel X-Axis : 14000 mm,
Travel Y-Axis : 4000 mm,
Travel Z-Axis : 1250 mm,
Travel W-Axis : 700 mm,
Spindle-mounting : ISO 50,
Spindle-driving : 41/ 56 kW,
Spindle-speed : 5 3000 min-1,
Spindle-torque : 2700 Nm,
Ram : 410 x 505 mm.
Automatic Tool-Changer :-
Positions 80,
Tool diameter max : 125/ 250 mm,
Tool length max : 450 mm,
Tool weight max : 30 kg,
Tool changing in horizontal spindle 20 seconds,
Tool changing in vertical spindle 30 seconds,
NC-Rotary-Table :-
Type TRT 150,
Clamping surface : 2000 x 2500 mm,
Table-loading : 30000 kg,
Travel V-Axis : 1500 mm,
B-Axis : 360 x 0,001,
Weight of table : 17000 kg,
Angle-Milling Head :-
Type TSQ 300/ 1,
Spindle-mounting ISO 50 DIN 69871 AD,
Spindle-speed 3000 min-1,
Spindle-driving 41 kW,
Torque 300 Nm,
Positioning 1 via HIRTH,
Automatic Milling Head :-
Type TABR 80 (1),
Spindle-mounting ISO 50 DIN 69871,
Spindle-speed 3000 min-1,
Spindle-driving 20/ 40 kW,
A-Axis 360 (via HIRTH in 1 steps),
B-Axis +/- 105,
Equipment :-
Coolant device and paper-band filtre,
Coolant through spindle 10 bar,
Swarf-conveyor,
Electronic hand-wheel,
Head pick-up station for three heads,
Control SIEMENS 840 D,
Hydrostatic guide-ways for all axis.
 
  37
IDMA26694
MakeSkoda Czech
ModelW200G
YOM1979
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 200 mm,
Spindle taper : ISO 60,
Column on bed (X axis) : 10500 mm,
Headstock vertically (Y-axis) : 4150 mm,
Spindle travel (Z -axis) : 2000 mm,
Ram travel (W -axis) : 1600 mm,
Ram size : 520 x 520 mm,
Spindle speeds : 1,6-630 RPM,
Main spindle motor : 83 kW.
The machine was modernized by Siemens Finland in 1985, converted to control system Sinumerik 3.
Machine has :-
Hydrostatics in X-axis.
New ball screw on Y-axis,
Guideways of the column (Y-axis) has been recently scraped, so in very good condition,
Guideways of the bed (X-axis) in very good condition,
Bed cover is well-preserved, fully functional,
Spindle and ram guideways are in very good condition,
Heidenhain measuring system LB,
X-axis with servomotor Siemens 1HU3,
Z+W axes with servomotor Siemens 1H03,
Main motor after recent reconditioning,
Crane on the column,
Milling head IFW 3A ISO 60,
Chip conveyor,
Rotary table TOS ISO 16,
Reducing sleeve ISO 50/60,
Tool holder screws (about 20 pcs).
 
  38
IDMA26642
MakeSacem
ModelMSC165
YOM1989 / Retrofit 2001
ConditionGood condition,under power
PhotoSee Photo  |  See Video
Spindle diameter : 165 mm,
Travels feeds :-
X axis (column longitudinal) : 12000 mm,
Y axis (headstock vertical) : 4000 mm,
Z axis (RAM longitudinal) : 1000 mm,
W axis (quill) : 800 mm,
Aerostatic guidances on X, Y and Z-Achse,
Max feed (X, Y, Z, W) : 0-2500 mm/min,
Max rapid feed : 10000 mm/min,
NC rotary- shifting table,
Clamping size : 2500 x 2500 mm,
Max table load : 40000 kg,
Position : 360000 x 0001,
Travels (V-axis) : 1500 mm,
Working unit,
Profile ram : 350 x 400 mm,
Spindle speed : 2 1.600 U/min,
Power : 100/40 % ED 50 kW,
Tool taper : ISO 50,
Measurements of the machine : L x W x H - 20000 x 11000 x 6500 mm,
Weight : 110000 kg.
CNC Control SINUMERIK 840 D.
Accessories:
1 piece rotary- shifting table manufacturer SACEM, 4 piece floor plates 5.000 x 2.000 mm,
aerostatic guideways, electronical handwheel, chip conveyor with coolant equipment.
The machine was complete modernised in 2001.
renewed in 2001: the complete electronical equipment, CNC-control, main spindle and axis drives,
machine cable system, complete measurements, main spindle bearing.
overhauled in 2001: hydraulic RAM sag compensation, aerostatic guideways.
 
  39
IDMA26452
MakeSchiess Froriep
Model180
YOM1979 Overhaul 2004
ConditionGood condition,under power
PhotoSee Photo
Spindle diameter : 180 mm,
Travel X axis : 12500 mm,
Travel Y axis : 4500 mm,
Travel Z axis : 1000 mm,
Travel W axis : 1300 mm,
Floor plates : 12000 x 4000 mm,
Spindle Taper : SK 50,
With : Control : CNC Siemens 880 M,
With : Double Pinion Guideways,
With some accessories and tooling.
 
  40
IDMA26335
MakeTos ,Varnsdorf
ModelWRD150Q
YOM2010
ConditionBrand New
PhotoSee Photo
Spindle diameter : 150 mm,
X axis : 12000 mm,
Y axis : 3000 mm,
Z axis : 1000 mm,
W axis : 800 mm,
Ram section : 450 x 450 mm,
Spindle taper : ISO 50,
Spindle speeds max : 2500 rpm,
Spindle power : 51-65 kW,
Spindle torque : 2460 / 3138 nm,
Feeds X, Y, Z, W : 1-8000 mm,
Rapid feed X : 20000 mm,
Rapid feed Y : 1600 mm,
Rapid feed Z, W : 12000 mm,
Equipment :
Magazine 40 tools,
Digital spindle motor Siemens,
Linear measure system Heidenhain,
B-axis circular sensor ROD Heidenhain,
W-axis sensor Heidenhain,
Table circular S25. 2 500 x 3 000 mm, V-axis 1 800 mm, load 25 to,
Pick-up SZP2 for 2 heads,
4 floor plates 1 885 x 4 020 x 400 mm,
2 cubes UK500. 500 x 530 x 560 mm,
2 angle plates UU 1450. 500 x 1 450 x 650 mm,
1 sensor with radio transmission, type M+H 20.41 Multi,
Coolant device type CHZ 150 WRD,
1 chip conveyor X = 12000 mm,
Universal head, type 50 HUR 3000 rpm, 20 kW, 1000 Nm,
1 set of spare parts for 3 years of service,
New machine still in original box with warranty 12 months,
Control : CNC Heidenhain iTNC 530 Dialog-System.
 
  41
IDMA26212
MakeSacem
ModelMSPR 200
YOM1988/2011 retrofit
ConditionGood condition,under power
PhotoSee Photo
Spindle diameter : 200 mm,
X travel : 8915 mm,
Y travel : 3355 mm,
Spindle travel : 1240 mm,
Ram adjustment : 978 mm,
Rotary table : CNC gesteuert,
Table surface area : 2500 x 200 mm,
Table load : 30 t,
Table indexing : 360,000 deg,
Table travel : 2000 mm,
Spindle speed : max. 950 1/min,
Control : NUM 1060
 
  42
IDMA26057
MakeSchiess Froriep
ModelFB180
YOM1987/2007 Complete Retrofit
ConditionGood Condition
PhotoSee Photo
Spindle dia : 180 mm/ISO 60,
X travel : 18000 mm,
Y travel : 4500 mm,
Z travel : 900 mm,
W travel : 950 mm,
7 axis : X/Y/Z/W/V/B + NC facing sliding head (facechuck),
2 axis NC rotary table 45 TDV,
2,250 X 2,250 mm,
Table load : 45000 kg,
Stroke V axis : 2000 mm,
Accessories :
60- tool magazine,
NC facing haed,
Angle milling head,
Universal milling head,
Chip conveyor,
Floor plates approximately 96 m,
4 x 4570 x 3050 x 4554 x 3560 x 3050 x 455 mm,
New axle drives - New cabinet - geometry,
Speed range 3.15 - 1000 rpm,
Around 3800 spindle hours,
Feed 1-5600 mm/min,
Rapid traverse 5600 mm/min,
Spindle motor : 85 kW,
Power : 130 kW/400 V,
Space about everything:
Length about 26 m,
Width approximately : 4.5 m +4.1 m floor plates,
Height : about 8.9 m,
Weight (machine only) approximately 110 tons.
 
  43
IDMA25893
MakeSkoda Czech
ModelWH160
YOM1974 overhaul 2002
ConditionGood Condition
PhotoSee Photo
Spindle dia : 160 mm,
X travel : 10000 mm,
Y travel : 3000 mm,
Z travel : 1600 mm,
W travel : 1250 mm,
Rotation of spindle : 1200 /min,
Output of spindle : 60 kW,
Spindle nose : ISO 50,
Control : System ICEM 402,
Floor Plates : 12000 x 3000 mm,
Weight: 80 ton
2 Milling heads available.
 
  44
IDMA25324
MakeSchiess Froriep
Model1FB180
YOM1986/2002
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 180 mm,
X travel : 15500 mm,
Y travel : 3000 mm,
Spindle stroke : 950 mm,
W axis : 900 mm,
Dimension of the ram : 340 x 400 mm,
Spindle taper ISO : 50,
Spindle turning speed range : 3,15 - 1000 U/min,
Feed speeds : 0,1-5600 mm/min,
Rapid traverse :5,6 m/min,
Voltage : 380/50 HZ V,
Main drive : 85 kW,
Total : power requirement : 120 kW,
2002 new CNC HEIDENHAIN iTNC 530 with full new electric
CNC rotary table ASQUITH 3000 x 3000 mm, max. 50 to. loading capacity
2nd CNC rotary table diameter 1000 mm for smaller components
autom. toolchanger 60-pockets, autom. headchanger 7-stations
( takes ca. 3-m x-travel ) high speed spindle 4000 rpm,NC-facing head,
NC-boring and milling head, angular milling head, universal milling head,
chip conveyor, hydrostatic guideways, floor plates,
diverse accessories.
 
  45
IDMA25116
MakeTos Czech
ModelWRD150Q
YOM2011
ConditionBrand New
PhotoSee Photo
Diameter of working spindle : 150 mm,
Travel X-axis : 15000 mm,
Travel Y-axis : 4000 mm,
Travel Z-axis : 1000 mm,
Travel W-axis : 800 mm,
Spindle nose : ISO 50,
Rotation of main spindle : 10-2500 rpm,
Spindle motor input : 51 kW,
X-axis rapid traverse rate : 20 m/min,
Y-axis rapid traverse rate : 16 m/min,
Working feed range Z and W axes : 12000 mm/min,
Time for changing tools : 20 s,
Automatic tool changer - 40 positions,
Universal milling head included,
Cooling through spindel - CHOV 40 bar,
feeds- X,Y,Z & W is 1-8000 mm/min,
rapid feed for X-axis is 20 000 mm/min,
for Y-axis is 16 000 mm/min,
for Z & W is 12 000 mm/min,
Positioning for X,Y,Z & W is 0,001 mm,
C-axis 0,1 mm,
Tool changeing time is 20 sec,
Tabel dimensions :-
Rotary table (max 25 000 kg) 2500 x 3000 mm,
Floorplates UD 4 (4020 x 1885 x 400 mm) 2 piece,
Floorplates UD 4 (4020 x 1260 x 300 mm) 2 piece,
Floorplates 4 (3100 x 1600 x 250 mm)1 piece,
Control system Heidenhain iTNC 530.
 
  46
IDMA24973
MakePama Italy
ModelSpeedram2000
YOM2011
ConditionBrand New
PhotoSee Photo
Travel X-Axis : 5000 mm,
Travel Y-Axis : 4500 mm (vertical),
Travel Z-Axis : 1200 mm (ram),
Travel W-Axis : 1000 mm (quill),
ATC 80 Positions,
Rotary-Table :-
Clamping surface : 2000 x 2500 mm,
Loading capacity : 40,000 kg,
Travel V-Axis : 2500 mm,
Head Pick-up station with space for 2 heads,
1 NC milling head,
New 2011 but originally packed and never used,
Control SIEMENS 840 D.
 
  47
IDMA24948
MakePoreba Poland
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia: 200 mm,
X: 10,000 mm,
Y: 4,700 mm,
Z: 1,400 mm,
V: 2,500 mm,
W: 1,000 mm,
Nc controller: Siemens 840D,
Main motor: DC/60 kw,
Attached chip conveyor
Rotary table: 3,000 m/m 4,000 m/m
Angle att.: 2 set
Max. Workpiece weight: 80 ton
Extra info :-
Ram size: 560 740
Y axis: actual 4,700m/m(1,500m/m extension)
X axis: actual 9,600m/m
y,w,z: ball screw.
X: worm rack.
V: rackgear
Rotary table: division angle : encoder type
Scale: x,y,v axis,
z,w: encoder type(fagor-spain)
Rapid traverse speed: x:3,000. Y:3,500. Z:2,800. W:2,000, v:1,100
Max. Workpiece weight: 80 ton
 
  48
IDMA24265
MakeSkoda Czech
ModelW200HB
YOM1987
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 200 mm,
X travel : 10,000 mm,
Y travel : 4000 mm,
Z travel : 1200 mm,
Tool taper : ISO 60/ ISO 50,
Max. torque on the milling spindle : 35,000 Nm,
Max. torque on the working spindle : 12,000 Nm,
Ram cross section : 520 x 520 mm,
Turning speed range : (I) 0,9 - 28,7 U/min,
Turning speed range : (II) 2,87 - 91,7 U/min,
Turning speed range : (III) 8,98 - 286 U/min,
Turning speed range : (IV) 28,68 - 914 U/min,
Quill stroke : 1600 mm,
Feeds x axis : 6000 mm/min,
Feeds y axis : 6000 mm/min,
Feeds z axis : 3000 mm/min,
Feeds power X : 40,000 N,
Feeds power Y : 40,000 N,
Feeds power Z : 60,000 N,
Electrics - voltage /frequency : 380/50 V/Hz,
W travel : 800 mm,
Total power requirement : 185 kw,
Weight of the machine ca : 145 t,
Dimensions of the machine ca : 20 x 8 x 8 m,
Rotary table size : 2000 x 2000 mm,
Table load : 20 ton.
Accessories :
Control : CNC FIDIA C20,
with floor plate : 15000 x 4000 mm,
With angle plate : 3,
With angular milling hed Skoda E 25.
 
  49
IDMA24144
MakeHomma
ModelHFM-65/120
YOM1992
ConditionGood Condition
PhotoSee Photo
Spindle dia/ size : 128 / 511 mm,
Travels (X/Y/Z) : 12000 / 6500 / 1000 mm,
Control : FANUC 15 M,
Max. work piece length : 12000 mm,
Max. work piece height : 6500 mm,
Spindle speed : 45~1000 rpm,
Spindle motor power : AC15/11 KW,
Spindle taper : 50 ISO,
Ram size : 450 mm,
Rapid speed (X/Y/Z/) : 6000 mm/min,
Feed speed (X/Y/Z) : 3000 / 3000 2000 mm/min,
Swivel degrees of A and B axis : +/-95 degrees,
Rapid speed (A and B axis ): 720 degrees/ min,
Electrical : AC-3 piles 200 V/60Hz/75 KVA.
 
  50
IDMA24004
MakePama Italy
ModelFT 140-0
YOM1986/97
ConditionGood Condition
PhotoSee Photo
Spindle Dia : 140 mm,
Column travel (x) : 6000 mm,
Head vertical travel (y) : 2500 mm,
Ram travel (w) : 820 mm,
Spindle stroke (z) : 840 mm,
Ram + spindle travel (w+z) : 1660 mm,
Ram size : 420 x 400 mm,
Spindle die - ISO 50 : 140 mm,
Spindle motor power : 37 kw,
Spindle speeds-n.3 ranges : 3 - 900 RPM,
Working feeds : 2 - 2000 mm/min,
Rapid feeds : 6000 mm/min,
CNC ECS 2400 - 6 axis,
With : 50 seats ATC.
 
  51
IDMA23990
MakeWotan,West German
ModelRapid4P
YOM1992
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 140 mm,
Travel X axis : 5000 mm,
Travel Y axis : 3000 mm,
Spindle stroke : 700 mm,
Ram horizontal adjustment : 500 mm,
Dimension of the ram : 310 x 310 mm,
Spindle taper ISO : 50,
Spindle turning speed range : 2-2000 min,
Feed : 5000 mm,
Rapid traverse : 10 mm,
Spindle motor : 40 kW,
Total power requirement : 100 kW,
Dimensions of the machine : m,
Weight of the machine : 42 t.
Equipment :
Floor plate approx 5x 2 m,
Aero-static guideways,
Hydrostatic spindle bearings,
Coolant through spindle,
Heidenhain seales,
Leveling elements, hand-held pendant, misc, arbors,
Control SIEMENS 850 CNC.
 
  52
IDMA23321
MakeChinese
Model
YOM2006
ConditionGood Condition
PhotoSee Photo
Spindle dia. 200 mm,
milling spindle dia. 320 mm,
Boring spindle taper ISO60,
ouill cross section 480x520 mm,
X axis travel 8000 mm,
Y axis travel 4000 mm,
Z axis travel 1200 mm,
W axis travel 1200 mm,
Main spindle speeds 2-1000rpm,
Z axis, W axis feed range 1-3000 mm/min,
Y axis, X axis feed range 1-6000 mm/min,
Main power motor 71kw,
Overall dimensions(LxWxH) 15040x4298x8550 mm,
Machine weight 130t.
With FUNAC CNC system.
 
  53
IDMA21728
MakeWotan,West German
Model
YOMRetrofitted in 2007
ConditionGood Condition
PhotoSee Photo
Spindle Dia 160 mm,
Spindle Taper 50 ISO,
Main Motor 63 Kw (80hp),
Spindle Speed 2 to 1250 rpm,
Ram section 350mm x 350mm,
X Axis (Longitudinal) 6000 mm,
Y Axis (Vertical)3500 mm,
Z Axis (Spindle)1000 mm,
W Axis (Ram)700 mm,
Table size 1800 x 2000 mm,
Table capacity 15 tons,
Table travel 1000 mm,
Rotary encoder 360,000 positions,
Floor Plates 4 units floor plates 3500mm x 1500mm,
ATC 60 tools.
CNC 800 mm diameter facing head, Control : Siemens 840 D,
Chip conveyor / way cover / Heidenhain Scales.
 
  54
IDMA20732
MakePama Italy
ModelFT140
YOM1989/90
ConditionDisassembled
PhotoSee Photo
Spindle dia : 140 mm,
X travel : 7000 mm,
Y travel : 4000 mm,
Ram travel (W) 900 mm,
Spindle stroke (Z) 900 mm,
Ram + spindle travel (w+z)1800 mm,
Ram sizes 420 x 400 mm,
Spindle taper - ISO 50,
Spindle motor power 70 hp,
Spindle speeds (n. 3 ranges) 3 900 rpm.,
Working feeds 2 2.000 mm/min.,
Rapid feeds 6.000 mm/min.,
CNC ECS 2301 - 6 axis,
Complete with:
- PAMA tgb cnc rotary table: 1.800 x 1.800, 1.500 travel,
Capacity 10 tons.
- n. 1 birotative milling head
- Floor Plates - 2000 x 6000 mm (2 Nos).
 
  55
IDMA19917
MakeSkoda Czech
ModelWD130B
YOM1979
ConditionGood Condition
PhotoSee Photo
Spindle dia. 130 mm,
Spindle taper ISO 50,
Hydraulic tools cramping,
Range of spindle 2-1000/min,
Main motor power 18,5 kw,
Travells: X= 3200 mm,
Y= 2300 mm,
Z= 1120 mm,
W= 450 mm,
Machine height 5280 mm,
Machine weight : 25000 kg.
Accessories :
Floor plates : 1800 x 4000 x 400 mm - 2pcs.
Rotary table Skoda E20 : Max. load 20t, table size 2000 x 2000 mm,
Control : Sinumerik SIEMENS 802D.
 
  56
IDMA19247
MakeSkoda Czech
ModelWK130
YOM1963/2001
ConditionGood Condition
PhotoSee Photo
Spindle dia 130 mm.
Spindle speeds 1,25-900 rpm.
Table size 1900 x 2000 mm.
Table load 12500 kg.
Ram Size : 400 x 400 mm
Travel
(X): 3500 mm.
(Y): 2000 mm.
(Z): 1200 mm.
(Y): 2000 mm.
(W): 800 mm.
(B): 360 grader-1 minute
Total power : 55 KW
Voltage : 380 Volt
 
  57
IDMA19223
MakeShibaura
ModelBSF20-14ANC
YOM1990 reco 1998
ConditionReconditioned
PhotoSee Photo
spindle dia 152 mm, 152mm
X travel 9000mm
Y travel 3000mm
Z travel 900mm
Wtravel 540mm
Rotary table size 2500X3200mm,CNC SYSTEM : BSF-20-14ANC
 
  58
IDMA18896
MakeMitsubishi
ModelMAF210.150B.FS
YOM1979/99/04
ConditionGood Condition
PhotoSee Photo
Boring Spindle : 150 mm,
Milling Spindle : 210 mm,
Spindle Taper : #50 ANSI,
Ram Cross Section : 737 mm x 533 mm ,
Vertical Head Travel, Y-Axis : 5000 mm,
Column Travel, X-Axis : 12,000 mm,
Ram Travel, Z-1 Axis : 700 mm,
Boring Spindle Travel, Z-Axis : 900 mm,
Total Axial Travel : 1600 mm,
Spindle Speeds,4-Ranges : 4-800 RPM,
Feed Rates, Inf Variable : 0.04-4801 mm/min 1-4800 MM/Min,
MITSUBISHI CNC ROTARY TABLE Model DIT-A 30 x 30,
Table Size : 3000 mm x 3000 mm,
Table Rotation : +/- 360 Degrees,
Rotary Table, Infeed : 1500 mm,
Rotary Table Weight Capacity : 33 Tons,
Rotary Table Speeds : 0.00015-0.66 RPM,
MACHINE EQUIPPED WITH:
SENTROL-2 CNC Control Retrofit 2004,
7000 mm x 5204 mm T-Slotted Floor Plates,
Heavy Duty Right Angle Head, HRH-15, 800 mm Reach,
(2) 914 mm x 3581 mm Cast Iron T-Slotted Angle Plates,
Full Length Mayfran (Tsubakimoto) Chip Conveyor,
Elevating Operators Platform,
Sliding Steel Way Covers,
Independent Drives on Ball Screws,
Double Rack & Pinion on X-Axis Column Travel,
45 KW Spindle Drive Motor.
 
  59
IDMA18827
MakeChinese
ModelTK6920
YOMBrand New
ConditionBrand New
PhotoSee Photo
Boring spindle dia. 200 mm,
Milling spindle face dia. 320 mm,
Main spindle taper hole ISO 60,
Ram dimensions 480mm520 mm,
Travel of column(X axis) 12,000 mm,
Travel of headstock (Y axis) 4500 mm,
Travel of boring (Z axis) 1300 mm,
Travel of ram (W axis) 1200 mm,
Total travel of boring spindle and ram (Z+W axis) 2500 mm,
Main spindle speed (stepless) 3.15-800r/min,
Feed speed of boring spindle and ram (stepless) 1 mm/min~3000 mm/min,
Rapid moving of boring spindle and ram 3000 mm/min,
Feed speed of headstock and column (stepless) 1mm/min~6000mm/min,
Rapid moving of headstock and column 3000 mm/min,
Power of main motor 71 kW,
Torque, speed of boring spindle feeding motor 41Nm 1500r/min,
Torque, speed of ram feeding motor 41 Nm 1500r/min,
Torque, speed of headstock feeding motor 65 Nm 2000r/min,
Torque, speed of column feeding motor 65 Nm 2000r/min,
Total capacity 200 KVA,
Distance from spindle center to platform 560mm~4560mm,
Weight (approx.) 130t,
Overall dimensions (LWH) 15006 4298 8850 mm,
Siemens SINUMERIK 840D type CNC system.
 
  60
IDMA17844
MakeIngersoll
ModelMasterHead
YOM1990
ConditionGood Condition
PhotoSee Photo
Y 3740 mm,
X 5413.5 mm,
Z 1082.5 mm,
Ram Cross Section 590 x 640 mm,
Spindle Speeds 0-2500 RPM,

INGERSOLL INFEEDING ROTARY TABLE
Table Size 2950 x 3150 mm,
Table Weight Capacity 50 Ton,
Table Infeed, V-Axis 3725 mm,
B-Axis Table Rotation 1 Degree,
Shot Pin Table Indexing 4 x 90 Degrees,


200-Station Automatiuc Tool Changer
118" x 206" Infeeding CNC Rotary Table
Through Spindle Coolant
(6) Assorted ASU Heads: Heavy Duty Right Angle Head,
Right Angle Head (3:1 ratio), Straight Head (1:1 Ratio),
Straight Head (1:1 Ratio), Fly Mill Cutter,
B-Axis Head (+/- 95 Degrees)
Heidenhain Scales on X, Y & Z
Renishaw Probe Capability
Telescoping Steel Way Covers on X,Y & V Axes
125 HP Spindle Drive Motor

Floor Space: 11600 mm, x 12875 mm X 7850 mm,
Approximate Machine Weight 300,000 lbs, EQUIPPED WITH:
FANUC 150 CNC Control

 
  61
IDMA15994
MakeMitsubishi
ModelMAF150RS
YOM1981/2004
ConditionGood Condition
PhotoSee Photo
Spindle Diameter 150 mm,
Milling Spindle Diameter 210 mm,
Travels: X=6000 mm,
Y=2500 mm,
Spindle Travel, Z 900 mm,
Ramstock Travel, Z-2 700 mm,
Total Axial Travel 1600 mm,
Spindle Taper #50,
Spindle Speeds (3-Ranges)10-1400 RPM,
Equipped With:
Fanuc 16MB CNC Control (Retrofit 2004),
Fanuc Motors & AC Drives,
Ballscrews on Y, Z1 & Z2,
Steel Sliding Way Covers on X-Axis,
Bellow Type Way Covers on Y-Axis,
Complete Documentation on Retrofit,
30 KW Spindle Motor.
Rotary Tables:
(1) 1600 mm x 1600 mm Mitsubishi CNC Infeeding Rotary Tables-
Model: DiTJ 16 x 16,
Weight Capacity: 14979 KG,
1000 mm Table Infeed.
Floor Space Including Rotary Tables: 13106 mmL x 9144 mmD x 6401 mm.
top