Category : Boring Mills

Sub-Category : Borer Jig

Total Machines Found : 51

Select | Machine Details
 
  1
IDMA34966
MakeWMW,Mikromat
Model4S
YOM1995
ConditionVery good condition
PhotoSee Photo
grinding diam 4-200 mm, XYZ 700x400x500 mm
REFU 316 main drive,
SIMODRIVE 611 feeds drive
CONTROLLER: SIEMENS SINUMERIK 840C
 
  2
IDMI7818
MakeMitsui Seiki
Model6AJB
YOM
ConditionGood Condition
PhotoSee Photo
Table working surface: W 825mm x L 1075mm
Table travel: 1000mm
Head travel on rail: 675mm
Rail vertical travel: 675mm
Quill travel: 250mm
Height under spindle nose: 50mm - 800mm
Distance between columns: 1075mm
Spindle speeds: 40 2,000 rpm.
Spindle feeds: 0.0016 0.0098 ipr.
Spindle taper: #4 MT.
Spindle motor: 5 Hp.
Dimensions (approx.): 120"L x 91"W x 110"H.
Weight (approx.): 17,000 lb.
 
  3
IDMI7817
MakeSIP,Swiss
Model5E
YOM
ConditionGood Condition
PhotoSee Photo
Longitudinal Travel Movement: 700 Mm
Transversal Movement Of Drilling Head: 500 Mm
Spindle Stroke: 180 Mm
Working Table Area: 900mm X 770 Mm Max.
Pass Between Table And Spindle: 800 Mm Min.
Distance Between Table And Spindle: 2
 
  4
IDMA34785
MakeDixi
Model3SO
YOM
ConditionGood Condition
PhotoSee Photo
Working area - 810x810mm
X travel - 570mm
Y travel - 590mm
Z travel 750mm
Spindle diameter 95mm
Weight 9000kg
 
  5
IDMA34589
MakeMikromat
ModelBKOZ800x1250
YOM
ConditionGood Condition
PhotoSee Photo
Distance between columns - 1080 mm
X travel - 1120mm
Y travel - 710mm
W travel - 630mm
Table - 800x1250mm
Dimensions - 4200x2400x3400mm
Weight - 7500kg
 
  6
IDMI7650
MakeKolb,German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table SIZE : 1250x1750
Travel : X-1000, Y-1500,Z- 1100
Column Gap : 1750mm
 
  7
IDMA34213
MakeLindner
ModelLB15A
YOM
ConditionGood Condition
PhotoSee Photo
Table surface area:1100 x 600 mm
spindle taper:20 / 30 / 40 MK
stroke - drilling depth:250 mm
max. drilling depth in one stroke:250 mm
drilling spindle stepless:0,03 - 0,16
total power requirement:380 V
weight of the machine ca.:6,8 t
dimensions of the machine ca.:4300x3800x2630 mm
 
  8
IDMA34016
MakeSIP,Swiss
Model600
YOM
ConditionGood Condition
PhotoSee Photo
There are 2 tables available.
Longitudinal travel - 1000 mm
Cross travel - 700 mm
Vertical travel - 780mm
Spindle stroke - 300 mm
Table - 1100x842 mm
Weight - 11000 kg
 
  9
IDMA33209
MakeMikromat
ModelBKOZ800x1250
YOM2001
ConditionGood Condition
PhotoSee Photo
Boring diameter - 115mm
Table's length - 1250mm
Table's width - 800mm
Machine's weight - 7500kg
 
  10
IDMA32929
MakeMas/Kovosit
ModelWKV100
YOM1972
ConditionGood working condition
PhotoSee Photo
Table - 1000x1600mm
Table load - 20000N
Distance between columns - 1600mm
X travel of the table - 1400mm
 
  11
IDMA32838
MakeSIP,Genovoise
ModelHydroptic-8P
YOM
ConditionGood Condition
PhotoSee Photo
Width between table and drill spindle - 1095mm
Distance between columns - 1450mm
Table width - 1024mm
Dimensions - 4100x3000x3200mm
Weight - 17000kg
 
  12
IDMA32358
MakeDixi
Model75
YOM
ConditionGood Condition
PhotoSee Photo
Spindle diameter: 75 mm,
X travel: 780 mm,
Y travel: 760 mm,
Z travel: 730 mm,
Height above the table: 570 mm,
table: 1000 x 10 mm,
Dimensions: 4000 x 2300 x 2500 mm,
Weight: 11000 kg
 
  13
IDMA31872
MakeHauser
Model5SM
YOM
ConditionGood Condition
PhotoSee Photo
Elctrics is to be partially changed.
Table - 900x770mm
X travel - 700mm
Y travel - 500mm
Z travel - 170mm
Dimensions - 2200x1900x2400mm
Weight - 4500kg
 
  14
IDMA31011
MakeDixi
Model75
YOM
ConditionGood Condition
PhotoSee Photo
Travel X: 780 mm
Travel Y : 680 mm
Travel Z : 430 mm
Travel W / Spindle exit: 750 mm
Rotary table 870 x 700 mm
Year of construction: 1967
Scale: HEIDENHAIN 4 axes
Delivered with several tools
Separate electrical panel
Voltage: 380 V
Dimensions (L x W x H) : 4200 x 2300 x 2475 mm
Weight : approx 10 T.
 
  15
IDMI6895
Make
Model
YOM
Condition
PhotoSee Photo  |  See Video
SIP-6A JIG BORING
Table Size: 1100 x 850mm, Between columns : 1100mm
 
  16
IDMI6894
Make
Model
YOM
Condition
PhotoSee Photo  |  See Video
SIP-5E JIG BORING
Table Size: 900 x 770mm, Between columns : 800mm
 
  17
IDMA29870
MakeMas/Kovosit
ModelWKV100
YOM1981
ConditionGood Condition
PhotoSee Photo
Distance between columns - 1600 mm
Table working surface - 1000 x 1600 mm
Max. weight of workpiece - 2000 kg
Main electric motor power - 4.0 kW
Dimensions of machine - 4320 x 3120 x 3313 mm
Weight - 16 000 kg
 
  18
IDMA29338
MakeSIP,Genovoise
ModelHydroptic 7R
YOM
ConditionVery good condition
PhotoSee Photo
COORDINATE PRECISION DRILLING MACHINES CROSS TRAV. 1500 MM. LONGIT. TRAV. 1200 MM VERT. TRAV. 1000 MM
 
  19
IDMA29322
MakeSIP,Swiss
ModelHydr.7A
YOM
ConditionGood Condition
PhotoSee Photo
With optical read out:
for axes: 2,
Drilling capacity in steel: 60 mm,
Spindle taper: MT: 4
Diameter of drilling spindle: 135 mm,
Spindle speeds: Number : 18,
-From-up to: 40-2000 rpm,
Reboring diameter
-up to: 300 mm,
Max. milling cutter diameter: 150 mm,
Table : LxW: 1570 x 1024 mm,
-Table longitudinal travel: 1400 mm
Cross travel of cross rail: 700 mm,
Feeds:
Table:
-Inf. variable from-up to: 25-500 mm/min,
Drilling head slide: -
-Cross:
-Number: 4
-from - up to: 30-180 mm/min,
Drilling spindle
-Number: 6
-From- up to: 0,04-0,35 mm/rot,
Rapid movement:
-Table: longitudinal: 2600 mm/min,
-Drilling head slide: 1500 mm/min,
-Cross rail: 360 mm/min,
-Distance between columns: 1600 mm,
Distance between spindle and table: 1000 mm,
Motor: 380 volt,
Spindle motor: 8,0 HP,
Size of machine: width/depth/height: 2550 x 4200 x 3260 mm,
Weight of machine: 15800 Kg.
Accessories and equipmet:
Rotary table: SIP
-model: Rotoptic6
-diameter: 800 mm,
Swivelling rotary table: SIP
-model: PI-5
-diameter: 450 mm,
Jig grinding head
-Manufacturing: Ray
Drilling device:
-manufacturing: Reglus
-number:46
Face milling cutter:
-number: 80
Reboring tools:
-number: 7
Facing and boring tools:
manufacturing: SIP
Number: 6
 
  20
IDMA29310
MakeWMW,Mikromat
ModelBKOZ900/1400/6PS2
YOM1985
ConditionGood Condition
PhotoSee Photo
Table size: 900x 1400 mm,
 
  21
IDMI6409
MakeHauser,Swiss
ModelNP40
YOM
ConditionGood Condition
PhotoSee Photo
Table size: 400 x 320 mm,
Cross travel: 200 mm,
Longitude travel: 350 mm,
Vertical travel: 300 mm,
Spindle quill travel: 100 mm,
Spindle adaption: ISO 30,
Maximum height of job: 300 mm,
Drive : DC variable drive: 3 HP
 
  22
IDMI6384
MakeMikromat
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size: 630 x100 mm,
Long travel: 700 mm,
Cross travel: 400 mm,
Vertical travels: 850 mm,
Adaption: ISO 40,
Spindle travel: 400,
Weight: 7.5 ton (approx),
Accessories: Speed expander,
Digital rotary table: dia 500, Height 165, WT 150 KG (SI 1429),
Packing blocks: with locating key and T slot: 5 nos,
SS pins (dia28)- 2 nos,
Lifting shaft: dia 80,2800 L,
Tool crib.
 
  23
IDMA29079
MakeLindner
ModelLB15
YOM
ConditionGood Condition
PhotoSee Photo
Table size - 1100 x 600 mm
Spindle diameter - 120 mm
Stroke - 250 mm
Max depth in one stroke - 250 mm
Max approach spindle-table - 700 mm
Dimensions - 4300 x 3800 x 2630 mm
Weight - 6800 kg
 
  24
IDMA29076
MakeSIP,Swiss
ModelHydroptic6A
YOM
ConditionGood Condition
PhotoSee Photo
Longitudinal travel:700 mm,
Cross travel: 1100 mm,
Vertical travel: 800 mm,
Tool holding fixture: 4 MK,
Spindle stroke: 340 mm,
Spindle speed: 40-2000 min,
Table surface (left-right): 840 mm,
Table surface (front-back): 1100 mm,
Optical measuring device: yes,
Digital display: yes,
Dimensions/Weights
Space requirements length: 2300 mm,
Space requirements width: 3400 mm,
Total height: 2700 mm,
Total weight approx: 8500 kg,
 
  25
IDMA29026
MakeWMW,Mikromat
Model9B-BKoZ900x1400
YOM1990
ConditionGood Condition
PhotoSee Photo
Spindle's diameter: 125 mm,
X travel: 1120 mm,
Y travel: 710 mm,
W travel: 630 mm,
Z travel: 315 mm,
Table: 900 x 1400 mm,
Globle table is available.
 
  26
IDMI6322
MakeSIP,Swiss
ModelMP5E
YOM
ConditionGood Condition
PhotoSee Photo
Table Size : 900 x 770 mm,
Table longitudinal travel : 700 mm,
Table speed:Inf. variable: From - up to 25-500 mm/min,
Vertical travel of cross rail : 600 mm
Distance between columns : 875 mm,
Distance between spindle and table : 200-800 mm.
Feeds:
- Boring head slide: Inf. variable: From - up to 25-500 mm/min
Drilling spindle:
- Number 4
- From - up to 0,04-0,21 mm/rpm
- Motor 380 volt,
- power 4 HP
- Size of machine: Length/width/height 190x235x248 cm
- Weight 5000 Kg.
 
  27
IDMI6181
MakeWMW,Mikromat
Model9B
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Travel X/Y/Z: 1400/900/500 mm,
Spindle taper: ISO 45,
Table dimensions:1400 x 900 mm,
Spindle speed : 2240 rpm,
Weight : 7800 kg,
High precision type,
X/Y/Z axis are with ball screw.
 
  28
IDMA27163
MakeMas/Kovosit
ModelWKV100
YOM1990
ConditionGood working condition
PhotoSee Photo
clamping surface of table 1000 x 1600 mm , table traverse 1400 mm , max distance of vertical spindle from table 1000 mm , horizontal traverse of vertical drilling head on cross rail 1000 mm , vertival traverse og horizontal tool head on upright 700 mm , distance og horiozontal spindle centre line from table 75-775 mm , machine weight of part machined 2 tons , vertical spindle speeds 23 steps in a range of 12.5 - 2000 RPM , horizontal spindle speeds 18 steps in a range of 20 - 1000 RPM, drilling feeds of both spindles 8 steps in range of 0.025-0.63 mm/rev , milling speeds of vertical tool head 6 steps in range of 50-500 mm/rev , electric motor for tool head drive 4 kW, accuracy of positioning 0.005 mm , accuracy of readings of adjusted positions 0.001 mm , dimensions of machine 4030 x 3130 x 3313 mm , machine weight 16 tons.
 
  29
IDMA27162
MakeSIP,Swiss
ModelHydroptic 8
YOM1967
ConditionGood working condition
PhotoSee Photo
Table size : 1570 x 1024 mm,
Travel X axis : 1400 mm,
Travel Y axis : 1000 mm,
Table load : 2 tons,
Travel Z (spindle) : 300 mm,
Spindle speed : 40 - 2000 RPM,
Machine Weight : 17 tons.
 
  30
IDMI5684
MakeSIP,Swiss
ModelHydroptic 6A
YOM
ConditionGood Condition
PhotoSee Photo
Table : 1100mm X 842mm,
Longitudinal Travel (X-axis): 1000 mm,
Transversal travel (y axis): 795 mm,
Vertical travel (z axis): 800 mm,
Table load max : 800 kg,
Drill capacity in steel : 55 mm,
Taper in spindle : MT 4,
Stroke of drilling spindle (Z-axis) : 250 mm,
Bore diameter max : 300 mm,
Rapid Traverse :
Table : longitudinal 2500 mm/min,
Transversal from 2500 mm/min,
Distance between columns : 1100 mm,
Distance between spindle and table : 900 mm.
 
  31
IDMA21303
MakeMas/Kovosit
ModelWKV100
YOM1970
ConditionGood Condition
PhotoSee Photo
clamping surface of table 1000 x 1600 mm , table traverse 1400 mm , max distance of vertical spindle from table 1000 mm , horizontal traverse of vertical drilling head on cross rail 1000 mm , vertival traverse og horizontal tool head on upright 700 mm , distance og horiozontal spindle centre line from table 75-775 mm , machine weight of part machined 2 tons , vertical spindle speeds 23 steps in a range of 12.5 - 2000 RPM , horizontal spindle speeds 18 steps in a range of 20 - 1000 RPM, drilling feeds of both spindles 8 steps in range of 0.025-0.63 mm/rev , milling speeds of vertical tool head 6 steps in range of 50-500 mm/rev , electric motor for tool head drive 4 kW, accuracy of positioning 0.005 mm , accuracy of readings of adjusted positions 0.001 mm , dimensions of machine 4030 x 3130 x 3313 mm , machine weight 16 tons.
 
  32
IDMA20547
MakeSIP,Swiss
ModelHydroptic 6A
YOM
ConditionExcellent
PhotoSee Photo
table size 1100 x 842 mm, Travels: 1000 x 700 x 805 mm, spindle 40-2000 RPM.
 
  33
IDMA19810
MakeOerlikon
ModelR2
YOM1990
ConditionGood Condition
PhotoSee Photo
Universal Table, tooling, spindle speeds 6 1900 revs/min, With DRO.
 
  34
IDMA19809
MakeSIP,Swiss
Model8000
YOM1990
ConditionGood Condition
PhotoSee Photo
Table size 1700 x 1160mm,
Longitudinal traverse 1200mm,
Taper in spindle 50 INT,
Spindle speeds 10 3000 revs/min.
With NUM 760 CNC Control,
50 Position ATC, CNC 4th Axis,
Range of toolholders, renishaw probing.
 
  35
IDMA18641
MakeTitan Romania
ModelGC2M
YOM1986
ConditionGood Condition
PhotoSee Photo
Working surface of the table-1200 x 1830 mm, Longitudinal stroke of the table, X axis-1530 mm, Cross stroke of the boring head, Y -1020 mm, Spindle sleeve stroke, Z-250 mm, Max. drilling diameter-60 mm, Max. boring diameter- 300 mm, Main spindle taper-MORSE 4, Main spindle speed range-45 - 2000 rpm, Spindle sleeve feed range-0,03 - 3 mm/rot, Spindle sleeve diameter-125 mm, Max. distance between main spindle and table-1270 mm, Main motor power-4 Kw, Machine net weight-14 ton, Overall dimensions (L x W x H): 4255 x 2900 x 3600 mm.
 
  36
IDMA18107
MakeDixi
ModelF310
YOM1979
ConditionGood Condition
PhotoSee Photo
X
1120
mm,

Y
710
mm,

Z
315
mm,

W
630
mm,

Table
860 x 1100
mm ,

Spindle rotation
6000
rpm,

Weight of the M/C
10
tons, Electrics
380/50
V/Hz

 
  37
IDMA17843
Make
ModelMP5E
YOM
ConditionGood Condition
PhotoSee Photo
 
  38
IDMA17842
MakeSIP,Swiss
Model600
YOM
ConditionGood Condition
PhotoSee Photo
 
  39
IDMA17581
MakeMitsui Seiki
ModelJ4BMT
YOM
ConditionGood Condition
PhotoSee Photo
Table : 760 x 520 mm, X=620 mm, Y=420 mm, Table Travel: 600 mm,
Spindle Saddle Travel : 400 mm, Spindle Speed: 50 1800 rpm.

 
  40
IDMA17580
MakeMitsui Seiki
ModelJ4B
YOM
ConditionGood Condition
PhotoSee Photo
Table : 760 x 520mm, X=620 mm, Y=400 mm, Z=390+80
Spindle Stroke 80, Spindle Speed: 40 2000 rpm.
Qty : 2 Nos.
 
  41
IDMA17579
MakeMitsui Seiki
ModelJ5A
YOM
ConditionGood Condition
PhotoSee Photo
Table 850 x 660 mm, X=750 mm, Y=500 mm, Z=600 mm,
Spindle Speed : 40 2000 rpm, Spindle Stroke : 200 mm.
 
  42
IDMA17578
MakeSIP,Swiss
ModelHydroptic 6
YOM
ConditionGood Condition
PhotoSee Photo
Table 1100 x 842 mm, X= 1000 mm, Y = 700 mm, Z= 750 mm,
 
  43
IDMA17577
MakeSIP,Swiss
ModelHydroptic 6
YOM
ConditionGood Condition
PhotoSee Photo
Table : 1100 x 842 mm, X=1000 mm, Y= 700 mm, Z= 750 mm.
 
  44
IDMA17576
MakeMitsui Seiki
ModelJ6BN
YOM
ConditionGood Condition
PhotoSee Photo
Table 1280 x 960 mm, X=1020 mm, Y=760 mm, Z=800 mm,
Spindle Stroke: 250, Spindle Speed: 45 2000 rpm

 
  45
IDMA17575
MakeMitsui Seiki
ModelJ7B
YOM
ConditionGood Condition
PhotoSee Photo
Table : 1830 x 1200 mm, X= 1530 mm, Y= 1020 mm, Z= 920 mm,
Spindle Stroke : 250, Spindle Speed: 45 2000 rpm,

 
  46
IDMA17574
MakeDevliege
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table : 1830 x 915 mm, Rotary Table : 450 mm, 2 Eagles.
 
  47
IDMA17557
MakeSIP,Swiss
ModelHydroptik 7A
YOM1974
ConditionVery good condition
PhotoSee Photo
spindle dia 135 mm ,
X 1400 mm
Y 1000 mm
vertical movement 1265 mm ,
distance drilling head clamping area 1600 mm ,
weight of the machine 14,5 tons.
 
  48
IDMA17528
MakeMitsui Seiki
Model3GB
YOM1988
ConditionExcellent
PhotoSee Photo
X axis travel-400 mm, Y axis travel-250 mm, Height from spindle to table-340, Table size-600x320, No of t-slots-5, Max weight of job on table-200, Spindle rpm- 5-300, Dimensions-1413x1390x2624, Weight-2300
 
  49
IDMA14879
MakeMas/Kovosit
ModelWKV100
YOM1983
Condition
PhotoSee Photo
clamping surface of table 1000 x 1600 mm , table traverse 1400 mm , max distance of vertical spindle from table 1000 mm , horizontal traverse of vertical drilling head on cross rail 1000 mm , vertival traverse og horizontal tool head on upright 700 mm , distance og horiozontal spindle centre line from table 75-775 mm , machine weight of part machined 2 tons , vertical spindle speeds 23 steps in a range of 12.5 - 2000 RPM , horizontal spindle speeds 18 steps in a range of 20 - 1000 RPM, drilling feeds of both spindles 8 steps in range of 0.025-0.63 mm/rev , milling speeds of vertical tool head 6 steps in range of 50-500 mm/rev , electric motor for tool head drive 4 kW, accuracy of positioning 0.005 mm , accuracy of readings of adjusted positions 0.001 mm , dimensions of machine 4030 x 3130 x 3313 mm , machine weight 16 tons
 
  50
IDMA13693
MakeSIP Hydroptic B
ModelHydroptic 6A
YOM
ConditionExcellent condition,almost new
PhotoSee Photo
Table size 1100 x 842 mm , SIP Rotary table, diameter 800 mm, Distance between the columns 1100 mm, Spindle to table 1000 mm , Travels X,Y,Z 1000 x 700 x 300 mm, Moving crossrail, Spindle drive motor 6 kW, Spindle speeds 40 2000 rpm,complete with all accesories, Toll Box full and SIP 4+5 Axes Table.
 
  51
IDMA13511
MakeRussian
Model2A470
YOM1974
ConditionExcellent ,unused
PhotoSee Photo
table size 1400 x 2240 mm , X 2000 mm , speed 2000 mm/min , distance between columns 2000 mm, rotary table 1000 mm, dimensions 6570 x5020 x 4110 mm , machine weight 36 tons.
top