Category : Drilling Machines

Sub-Category : Drilling Radial

Total Machines Found : 185

Select | Machine Details
 
  1
IDMA35028
MakeCsepel,Hungary
ModelRF75/1750
YOM
ConditionGood Condition
PhotoSee Photo
Drill Diameter : 75mm
Arm Length : 1750mm
With:TABLE
 
  2
IDMI7829
MakeKolb,German
ModelHK62
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Drilling capacity- 62 mm
Total arm length- 1600 mm
Working arm length- 1000 mm
Spindle Taper- MT5
Spindle diameter- 86 mm
Spindle quill length- 500 mm
Height- 650 mm
Cube size- L X W X H- 600 X 500 X 500 mm
Power required- 8 HP
 
  3
IDMA34530
MakeChepel Budapest
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling diameter in steel - 100mm
Drilling diameter in cast-iron - 120mm
Distance between spindle's axis and columns' guideways - 540...3000mm
Main drive power - 13kW
Dimensions - 4390x1550x4130mm
Weight - 13200kg
 
  4
IDMA34401
MakeGiddings & Lewis
Model
YOM
ConditionGood Condition
PhotoSee Photo
Arm Length:4.0
Column Dia.:13.0"
Power:15.0 HP
Drills to Center of Circle at Base: 96"
Min./Max. Distance Spindle to Base: 11 1/2" - 60"
Spindle Travel: 20"
Spindle Speeds: 14-1750rpm
Spindle Feed Changes (18): .004 to .0125 IPR
6 Built-In Tap Leads: 8, 11 1/2, 14, 18, 20, 27 TPI
Working Surface of Base: 36 x 59
Main Motor & Controls: 15hp 208/220/440/3/60
Approx. Dimensions: 120"L x 48"W x 107"H
Approx. Weight: 14,200 lbs
 
  5
IDMI7645
MakeBragonzi
ModelLP1250
YOM
ConditionGood Condition
PhotoSee Photo
Spindle ; 50mm
Arm travel ; 1250
With box table complete running
 
  6
IDMA34303
MakeInfratirea Oradea,Romania
ModelGR616
YOM
ConditionGood Condition
PhotoSee Photo
Dia : 60mm x 1600mm
 
  7
IDMI7599
MakeTOS MAS
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity steel/cast iron 80 mm
arm length 2515 mm
spindle taper MK 6
bore capacity in cast iron 90 mm
workpiece height max. 2000 mm
Boring depth max. 475 mm
spindle motor 7.5 kW
weight of the machine :10,5 t
 
  8
IDMA34110
MakeCsepel,Hungary
ModelRF51B
YOM1983
ConditionGood Condition
PhotoSee Photo  |  See Video
Arm length: 3 mm,
Column dia: 624.8 mm,
RPM: 1500 mm,
Dimensions: 2000 x 4000 x 4000,
Weight; 16000 kg,
The maximum distance between the spindle axis and the column is 3000 mm
 
  9
IDMA34095
MakeSMTCL
ModelZ3080x25
YOM2012
ConditionGood Condition
PhotoSee Photo
Max drilling dia 80mm
Distance 2500mm
Distance from spindle base to table 550-2000mm
Spindle stroke 450mm
Spindle speed range 16-1250rpm
Spindle Taper Number 6
Table size 800mm x1000mm
Horizontal arm width 3200mm
Main motor power 7.5kw
Machine weight 11000kg
Outline dimension 3730mm x1400mm x4025mm
 
  10
IDMA33816
MakeGeorg
ModelB100B
YOM1996
ConditionGood Condition
PhotoSee Photo
Its equipped with ball screw.
Diameter of drilling spindle: 70 mm,
Drilling diameter in steel: 70 mm,
Drilling diameter in cat iron: 85 mm,
Drilling spindle torque: 1000 Nm,
Arm's horizontal travel: 1120 mm,
Drilling depth in one feeds range: 350 mm,
Weight: 6600 kg.
 
  11
IDMA33705
MakeCsepel,Hungary
ModelRFH100
YOM
ConditionGood Condition
PhotoSee Photo
Radial dia: 80/100
The length of the boom: 3000 mm
 
  12
IDMA33694
MakeRussian
Model2A576
YOM
Condition
PhotoSee Photo
max drill dia 75 mm , spindle overhang (the distance between the spindle axis and pillar surface) : 500 mm min , max 2000 mm , distance between the spindle end face and the base plate : min 400 mm , max 2000 mm , distance between the spindle end face and table 1500 mm max ,Drill head : spindle taperMprse No.6 , spindle stroke 500 mm , max travel of drill head 1500 mm , Arm: max vertical travel 900 mm , max angular rotation around the column 360 deg , table : table working surface : 630 x 800 mm , width of T slot 22 mm , number of slots 3+3 , slot to slot spacing 170 mm, base plate : working surface width 1250 mm , width of T slot 28 mm , number of slots 5 , slot to slot spacing 250 mm , speeds and feeds : number of spindle speeds 22 , spindle speed range 12.5 to 1600 RPM , number of spindle speeds 18 , spindle feed range 0.063 to 3.15 mm/rev , drill head rapid travel speed 5000 mm/min , arm rapid travel speed 750 mm/min , max drilling pressure 3200 kgf , max spindle torque 140 kgf.m , drive, dimensions and weight : three phase electric motors : main drive motor : power 7.5 kW , speed 1460 RPM , drive motor for rapid vertical travel of the arm (table) : power 3 kW , speed 1450 RPM , drive motor of drill head hydraulic station : power 0.8 kW , speed 1400 RPM , column clamping motor : power 0.5 KW , speed 1440 RPM , dia of circle circumscribed when the arm is swivelled through 360 deg 5690 mm , overall dimensions 3500 x 1550 x 3875 mm , weight 10 tons.
 
  13
IDMA33693
MakeRussian
Model2A576
YOM
ConditionGood Condition
PhotoSee Photo
max drill dia 75 mm , spindle overhang (the distance between the spindle axis and pillar surface) : 500 mm min , max 2000 mm , distance between the spindle end face and the base plate : min 400 mm , max 2000 mm , distance between the spindle end face and table 1500 mm max ,Drill head : spindle taperMprse No.6 , spindle stroke 500 mm , max travel of drill head 1500 mm , Arm: max vertical travel 900 mm , max angular rotation around the column 360 deg , table : table working surface : 630 x 800 mm , width of T slot 22 mm , number of slots 3+3 , slot to slot spacing 170 mm, base plate : working surface width 1250 mm , width of T slot 28 mm , number of slots 5 , slot to slot spacing 250 mm , speeds and feeds : number of spindle speeds 22 , spindle speed range 12.5 to 1600 RPM , number of spindle speeds 18 , spindle feed range 0.063 to 3.15 mm/rev , drill head rapid travel speed 5000 mm/min , arm rapid travel speed 750 mm/min , max drilling pressure 3200 kgf , max spindle torque 140 kgf.m , drive, dimensions and weight : three phase electric motors : main drive motor : power 7.5 kW , speed 1460 RPM , drive motor for rapid vertical travel of the arm (table) : power 3 kW , speed 1450 RPM , drive motor of drill head hydraulic station : power 0.8 kW , speed 1400 RPM , column clamping motor : power 0.5 KW , speed 1440 RPM , dia of circle circumscribed when the arm is swivelled through 360 deg 5690 mm , overall dimensions 3500 x 1550 x 3875 mm , weight 10 tons.
 
  14
IDMA33540
MakeCsepel
ModelRF51
YOM
ConditionGood Condition
PhotoSee Photo
Bore capacity - 100mm
Max throat - 3000mm
Dimensions - 4390x1550x4130mm
Weight - 13200kg
 
  15
IDMI7269
MakeBatliboy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity upto: 60 mm
 
  16
IDMI7268
MakeHMT,India
ModelRM55
YOM
ConditionGood Condition
PhotoSee Photo
Capacity upto: 40 mm
 
  17
IDMI7230
MakeHEC,Tos
Model515
YOM1999
ConditionGood Condition
PhotoSee Photo
100mm spindle dia. x 3000mm arm length
 
  18
IDMA33019
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling diameter in steel - 100mm
Drilling diameter in cast-iron - 120mm
Distance between spindle's axis and columns' guideways - 540...3000mm
Main drive power - 13kW
Dimensions - 4390x1550x4130mm
Weight - 13200kg
 
  19
IDMI7130
MakeWMW
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drill capacity 60 mm
Arm length 1600 mm
With box table
Hydrolic clamping
 
  20
IDMI7128
MakeChinese
ModelZ3040
YOM
ConditionGood Condition
PhotoSee Photo
Max. Drilling Capacity : 35/40 mm
Spindle Speeds Series: 16
Dimension of Worktable: 630500500 mm
Overall Size: 200010602650 mm
Distance Spindle Axis to Column: 350~1000 mm
Spindle Travel:195 mm
Range of Spindle Feeds: 0.04-3.2
Dimension of Base: 1700 X 720 X 2230 mm
Power of Main Motor: 4kw
 
  21
IDMA32380
MakeTos Czech
ModelVO 63
YOM
ConditionGood Condition
PhotoSee Photo
aa
 
  22
IDMA32376
Make
ModelVO50
YOM
ConditionGood Condition
PhotoSee Photo
weight 4.200 Kg
 
  23
IDMA32375
MakeMas,Czech
ModelVR6A
YOM1983
ConditionGood Condition
PhotoSee Photo
Drilling dia : 60 mm,
Arm length : 2000 mm,
Working height : 1000 mm.
 
  24
IDMA32143
MakeCsepel,Hungary
ModelRFH100/8000
YOM1986
ConditionGood working condition
PhotoSee Photo
Drilling diameter - 100 mm
Platform's length - 8000 mm
 
  25
IDMA32132
MakeKolb,German
ModelRH 100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Full drill St60/GG25 80/100 mm
Screw thread St60/GG25 M72x6/M100x6
With pre drill St50/GG25 130/160mm
Spindle power St60/GG25 7,5 kW
Dimension :
Max distance from column 3000mm
Column diameter 600mm
Drilling head movement 2425mm
Base/Spindle distance min 210mm
max. 2110mm
Spindle Z 600mm
Transmission unit
22 rotation transmission range 11-1400 min-1
1,25
18 feeding transmission range 0,05 - 2,5mm/rotation
1,25
Spindle
Spindle/drilling unit diameter 65/115mm
Spindle tapper MK6
 
  26
IDMA31997
MakeKnuth
ModelR60
YOM
ConditionGood Condition
PhotoSee Photo
Drilling diameter - 63mm
Drilling depth - 315mm
Table - 2400x1000x200mm
Box table - 500x710x500mm
Arm length - 1250mm
Dimensions - 2490x1050x2780mm
Weight - 3800kg
 
  27
IDMA31608
MakeCsepel,Hungary
ModelRF50/1600
YOM
ConditionVery good condition
PhotoSee Photo
Drilling diameter in steel:50 mm,
Arm length: 1600 mm,
Drilling diameter in cast iron: 63 mm,
Dimensions: 2500 x 1000 x 2660 mm,
Weight: 3200 kg
 
  28
IDMA31605
MakeCsepel
ModelRF 50/1600
YOM
ConditionVery good condition
PhotoSee Photo
The machine is complete. In very good conditions. Under the power
Drilling diameter in steel - 50mm
Arm length - 1600mm
Drilling diameter in cast iron - 63mm
Dimensions - 2500x1000x2660mm
Weight - 3200kg
 
  29
IDMI6982
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Csepel Drilling Machine-(Drilling-1)
L- 3000 mm
H-2500 mm
Spindle Size-110 mm
Drilling Capacity -85 mm
Three Numbers Available
 
  30
IDMI6979
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling cap in M.S : 50mm
Drilling cap in C.I 50mm
Column dia : 330
Travel of drilling head : 1350
Travel of spindle : 300
Height base to spindle nose : 1600
Radius of arm : 3200
Distance column to spindle nose : 1600
Spindle nose taper : MT - 5
Base dimensions : 2500 X 1050
Lifting motor : 2-hp
Main motor : 3-hp
Length of arm : 2000
Dimensions of work table : 580 X 500 X 450
Double column : 1 nos.
Hydraulic locking on column 1 nos.
 
  31
IDMI6975
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Radial drill 60 mm
 
  32
IDMA31127
MakeCsepel
ModelRFH 1000/3000
YOM
ConditionGood Condition
PhotoSee Photo
Radialbohrmaschine, gebraucht
radial drilling m/c, used
Typ/ type: RFH 100 x 3000
Hersteller/ make: Csepel
Bohrleistung/ capacity at boring: 100 mm ( St 60 )
120 mm ( GG / cast iron )
Werkzeugaufnahme / taper in spindle: MK 6
Entfernung Saeulenrand bis Bohrspindel/
distance column to drilling spindel: 540.. 3000 mm
Vertikale Verstellbarkeit des Auslegers / vertical
adjustment of arm: max. 1260 mm
Entfernung Bohrspindel bis floor plate/
distance column to drilling spindel: 440.. 2100 mm
Bohrtiefe / drilling depth: 500 mm
Drehzahlbereich/ range of speeds: 21 Drehzahlen; 18..1800 U/ min // rpm
Vorschub/ feed: 18 Vorschuebe; 0,0375 ..2 mm /U//mm per round
Gewindebohren / thread drilling: 100 mm/ 125 mm
Hub / stroke: 380 mm
Anschlusswert/ connected power: 20 kW
Gewicht / weight: ca. 14 to
 
  33
IDMA31126
MakeMas,Czech
ModelVRM50
YOM
ConditionGood Condition
PhotoSee Photo
large bore capacity in steel : 50 mm
tool taper MT 5
radius min. / Max. 1326/2240 mm
Max depth 350 mm
vertical displacement of the cantilever 1260 mm
horizontal adjustment of the boom 920 mm
rotation of the jib around the column 360
rotating the spindle head about the longitudinal axis of the boom 360
tilting the spindle head by the top and bottom 90 15
screw speed 16-800 rpm .
6 automatic feed rates from 0.05 to 0.5 mm / rev input power 4,4 kW
weight approx 6800 kg
 
  34
IDMI6966
MakeCsepel
ModelRFH75/2500
YOM
ConditionGood Condition
PhotoSee Photo
Csepel RFH/2500
Drill Capacity : 75 mm
Arm Length : 2500 mm
 
  35
IDMI6965
MakeHMT,India
ModelRM63
YOM
ConditionGood Condition
PhotoSee Photo
Capacity-60 mm
Arm length- 1800 mm
 
  36
IDMA31123
MakeRFH
Model
YOM1981
ConditionGood Condition
PhotoSee Photo
RFH 100 x 3000 mm.
Drilled capacity of steel/cast iron : 100/120mm
Drilled diameter with pre drill of steel/cast iron : 170/200mm
Thread cutting of steel/cast iron : 100/125 mm
Drilling radius : 3000mm
Work piece height : 440...2100 mm
Min. spindle distance from column : 540mm
Spindle turning speed range,rpm : 18...1800
Spindle taperMT : 6
Quill stroke : 400 mm
Column diameter : 600 mm
Foundation size for work piece clamping : 3160 x 1550 mm
Main drive power : 13kW
Machine dimensions : 4390 x 1550 x 4130mm
Machine weight :
 
  37
IDMI6964
MakeWMW
ModelBR 56
YOM
ConditionGood Condition
PhotoSee Photo
Model : BR 56
Capacity : 60 mm
Arm Length : 1600 mm
 
  38
IDMA31121
MakeMas,Czech
ModelVOM50
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity in steel 600 MPa t.s. : 50mm
Drilling capacity in grey cast iron 250 MPa t.s. : 65 mm
Arm 2000 mm
Max. vertical displacement of the arm : 1250 mm
Speed range : 16 800 min-1
Main electric motor output : 4 kW
 
  39
IDMA31120
MakeMas,Czech
ModelVOM50
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity in steel 600 MPa t.s. : 50mm
Drilling capacity in grey cast iron 250 MPa t.s. : 65 mm
Arm : 2000 mm
Max. vertical displacement of the arm : 1250 mm
Speed range : 16 800 min-1
Main electric motor output : 4 kW
 
  40
IDMA31033
MakeCsepel,Hungary
ModelRF51
YOM1964
Condition
PhotoSee Photo
bore capacity in steel (diameter) 100 mm
throat max. 3000 mm
workpiece height max. 440 2100 mm
spindle taper MT 6
spindle turning speed range 18 1800 U/min
quill stroke 400 mm
surface area 3160 x 1550 mm
feed range boring 0,0375 2 mm/min
voltage 380 V
distance spindle column min./max. 400 2850 mm
total power requirement 13 kW
weight of the machine ca. 13,2 t
dimensions of the machine ca. 4,39 x 1,55 x 4,13 m
 
  41
IDMA30800
MakeStankoimport
Model2M57
YOM
Condition
PhotoSee Photo
Drilling capacity: 80 mm
Spindle taper: MK 6

Spindlestroke: 475 mm
Speeds: 12,5 - 1.600 Rpm

Throat min.: 500 mm
Throat max.: 2.300 mm

Floorplate: 1.250 x 1.900 mm
Machine weight: 10.000 kg
 
  42
IDMA30799
MakeCsepel,Hungary
ModelHFR 75/1600
YOM
Condition
PhotoSee Photo
term of delivery- immedately, stock no- 6881
 
  43
IDMA30798
MakeCsepel,Hungary
ModelRF 50/1600
YOM1983
Condition
PhotoSee Photo
Stock no- 6769, delivery can be immediate
 
  44
IDMA30796
MakeWMW-VEB
ModelBR 40/1250
YOM1971
Condition
PhotoSee Photo
1 used radial drill make WMW-VEB, model BR 40 x 1250, YOM 1971,
5 MT, throat 1250 mm
acc.: box table, coolant
 
  45
IDMA30795
MakeWMW
ModelBR 40/1250
YOM1969
Condition
PhotoSee Photo
1 used radial drill make WMW, model BR 40 x 1250/1, YOM 1969,
5 MT, throat 1250 mm
acc.: coolant
 
  46
IDMI6739
MakeHMT,India
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table -1400 X 800,
Travel -1500 X 1200,
Spindle - 80 mm,
RPM - 1700.
 
  47
IDMI6699
MakeHMT,India
ModelRM63
YOM
ConditionGood Condition
PhotoSee Photo
Arm length: 1700 mm
 
  48
IDMI6698
MakeHMT,India
ModelRM65
YOM
ConditionGood Condition
PhotoSee Photo
Hydraulic Clamping,Arm Length 1800,complete in all aspects,trial will be given,only of confirmation
 
  49
IDMA30109
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling diameter in steel - 100 mm
Drilling diameter in cast-iron - 120 mm
Distance between spindle's axis and columns' guide ways - 540...3000 mm
Main drive power - 13kW
Dimensions - 4390x1550x4130 mm
Weight - 13200 kg
 
  50
IDMI6634
MakeMas,Czech
Model
YOM
ConditionGood Condition
PhotoSee Photo
Arm length: 4250 mm,
Spindle: 100 mm,
Machine weight: 20 tons
 
  51
IDMI6633
MakeMas,Czech
ModelVR8
YOM
ConditionGood Condition
PhotoSee Photo
Diameter : 100 mm
Arm Length : 2500 mm
 
  52
IDMI6632
MakeMas,Czech
ModelVR84A
YOM
ConditionGood Condition
PhotoSee Photo
Diameter : 100 mm
Arm Length : 4000 mm
 
  53
IDMI6631
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity : 100 mm,
Arm length : 3000 mm
 
  54
IDMI6624
MakeEMA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling Capacity: 50 mm
Arm Length: 1200
 
  55
IDMI6621
MakeTOWN
Model
YOM
ConditionGood Condition
PhotoSee Photo
Arm length: 80 x 1800 mm
 
  56
IDMI6620
MakeKolb,German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Diameter: 100 mm,
Arm length: 3200 mm
 
  57
IDMI6619
MakeKolb,German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Mechanical
Drilling dia: 90 mm,
Arm length: 1800 mm
 
  58
IDMI6618
MakeRaboma
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity : 65 mm in SS (75 mm in MS),
Arm Length : 2000 mm.
 
  59
IDMI6617
MakeROBOMA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity: 65 mm in SS (75 mm in MS),
Arm length: 2000 mm
 
  60
IDMI6616
MakeHMT,India
ModelRM62
YOM
ConditionExcellent
PhotoSee Photo
Drilling Capacity : 60 mm,
Arm : 1500 mm.
 
  61
IDMI6615
MakeMas,Czech
ModelVR10
YOM
ConditionGood Condition
PhotoSee Photo
Arm Length : 3 m,
Spindle size : 110 mm,
Height : 1700 mm,
Column moving : 5.5 m.
With motor and inside gear box one clutch plate there.
 
  62
IDMI6614
MakeMas,Czech
ModelVR10
YOM
ConditionGood Condition
PhotoSee Photo
Arm Length : 3 m,
Spindle size : 110 mm,
Height : 1700 mm,
Column moving : 5.5 m.
Without motor and inside gear box one clutch plate not there.
 
  63
IDMI6613
MakeHMT,India
ModelRM63
YOM
ConditionGood Condition
PhotoSee Photo
Capacity in steel:2 inch
Power (main motor):7 12 HP, 3 34 HP (2 speed motor)
Power (drill head):2 HP
Spindle taper:MT - 5
Number of spindle speeds: 12
Speeds:40, 56, 80, 112, 160, 224, 315, 450, 630, 900, 1250, 1800
Number of feeds:6
Feeds in inches per revolution: 0.005, 0.008, 0.012, 0.020, 0.030, 0.050


Working Range:
Column sleeve diameter:350 mm
Maximum drilling radius:1800 mm
Minimum drilling radius:530 mm
Quill traverse:325 mm
Base plate to spindle, maximum:1420 mm
Base plate to spindle, minimum:355 mm
Drilling head traverse:1250 mm
Arm traverse:740mm
 
  64
IDMA29808
MakeCsepel,Hungary
ModelRFH75/1750
YOM
ConditionGood condition,under power
PhotoSee Photo
Max drilling diameter without rough drilling : 75 mm,
Max drilling diameter with rough drilling : 125 mm,
Vertical travel of the arm : 950 mm,
Distance between spindle's edge and column : 440..1750 mm,
Distance between spindle's edge and plate : 370..1700 mm,
Plate's size : 2050x1100 mm,
Dimensions : 2970 x 1300 x 3400 mm,
Weight : 6800 kg.
 
  65
IDMA29763
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling diameter in steel: 100 mm,
Drilling diameter in cast- iron: 120 mm,
Distance between spindle's axis and column's guideways: 540-3000 mm,
Main drive power: 13 kW,
Dimensions: 4390 x 1550 x 4130 mm,
Weight: 13200 kg,
 
  66
IDMA29676
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drlling diameter in steel: 100 mm,
Drilling diameter in cast-iron: 120 mm,
Distance between spindle's axis and columns's guide ways: 540....3000 mm,
Main drive power: 13 kW,
Dimensions: 4390 x 1550 x 4130 mm,
Weight: 13200 kg.
 
  67
IDMA29603
MakeCsepel,Hungary
ModelRF50/1250
YOM
ConditionGood working condition
PhotoSee Photo
Max drilling diameter: 50 mm,
Max. vertical arm adjustment: 1420 mm,
Max. movement of spindle shoulder: 1250 mm,
Main motor output: 5 kW,
Dimensions (L x W x H): 2190 x 950 x 2830 mm,
Machine weight: 3050 kg.
 
  68
IDMI6549
MakeMas,Czech
ModelVR4
YOM
ConditionGood Condition
PhotoSee Photo
Drilling Capacity : 50 mm,
Arm Length : 1250 mm,
With Tilting Table.
Qty : 2 nos.
 
  69
IDMA29480
MakeMas,Czech
ModelVO80P1
YOM1987
ConditionGood Condition
PhotoSee Photo
Max drilling capacity in steel: 80 mm,
Maximum drilling capacity in cast iron: 110 mm,
Maximum drilling diameter in steel with the management of: 300 mm,
maximum distance spindle axis to the leadership mantle in: 2515,
Vertical performance arm: 1250 mm,
Spindle speed: 30 degrees,
Range: 91800 min,
Output of main engine: 7,5-11 kW,
total input: 13,5 kVA,
Weight: 12100 kg.
 
  70
IDMA29367
MakeInfratirea Oradea,Romania
ModelGR616
YOM1981
ConditionGood Condition
PhotoSee Photo
Maximum drilling capacity in steel: 60 mm
Spindle sleeve stroke: 320 mm
Column diameter: 360 mm
Drilling slide stroke on arm: 1250 mm
Arm length: 1600 mm
Machine height: 2965 mm
Arm stroke on column: 800 mm
Min / max distance from the base plate to the main spindle: 350 mm / 1470 mm
Main spindle taper: MORSE 5
Main motor power: 4 kW
Machine weight: 4500 kg
 
  71
IDMA29317
MakeCincinnati Machines
Model
YOM
ConditionGood Condition
PhotoSee Photo
Distance from center of column to face of column : 295 mm,
Min distance, face of column to spindle : 300 mm,
Min Spindle radius : 593 mm,
Min distance, spindle to base : 292 mm,
Weight : 8100 kg.
 
  72
IDMI6431
MakeHMT,India
ModelRM65
YOM
Conditionexcellent working condition
PhotoSee Photo
Drilling in solid steel: 50 mm
Casting: 60 mm,
Drilling radius: min 550 mm,
Max: 2350 mm,
Working surface base: 2300 mm,
Working base width: 1000 mm,
Drilling speed: 40 to 1800 RPM,
Tape nose in spindle: MT5,
Max. drill thrust: 1650 DAN,
Total power: 6 KW,
Machine weight: 4650 KGS
With box type table and machine manuals.
 
  73
IDMI6430
MakeHMT,India
ModelRM63
YOM
Conditionexcellent working condition
PhotoSee Photo
Arm travel: 1800 mm,
Spindle taper: MT15
Job height: 1500 mm,
Along with box type table,
Drill capacity : 50 mm cast Iron,
And 60 mm steel components,
Total power: 10 HP,
With hydraulic
 
  74
IDMI6429
MakeHMT,India
ModelRM62
YOM
ConditionGood Condition
PhotoSee Photo
Capacity in steel : 2 inch,
Power (main motor) : 7 12 HP, 3 34 HP (2 speed motor),
Power (drill head) : 2 HP,
Spindle taper : MT - 4,
Number of spindle speeds : 12,
Speeds : 40, 56, 80, 112, 160, 224, 315, 450, 630, 900, 1250, 1800,
Number of feeds : 6,
Feeds in inches per revolution : 0.005, 0.008, 0.012, 0.020, 0.030, 0.050,
Column sleeve diameter : 350 mm,
Maximum drilling radius : 1500 mm,
Minimum drilling radius : 530 mm,
Quill traverse : 325 mm,
Base plate to spindle, maximum : 1420 mm,
Base plate to spindle, minimum : 355 mm,
Drilling head traverse : 1000 mm,
Arm traverse : 740 mm.
 
  75
IDMA29090
MakeCsepel,Hungary
ModelRFH100/3000
YOM1982
ConditionGood Condition
PhotoSee Photo
Drilling diameter in steel: 100 mm,
Drilling diameter in cast iron: 120 mm,
Distance between spindle's axis and column's guide ways: 540...3000 mm
main drive power: 13 kW,
Dimensions: 4390 x 1550 x 4130 mm,
Weight: 13200 kg.
 
  76
IDMI6374
MakeBreda
ModelR1200L
YOM
ConditionGood Condition
PhotoSee Photo
Maximum drilling capacity: 40 mm,
Arm length: 1200 mm.
 
  77
IDMA28970
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling diameter in steel: 100 mm,
Drilling diameter in cast - iron: 120 mm,
Distance between spindles axis and columns guide ways: 540...3000 mm,
Main drive power: 13 kW,
Dimensions: 4390 x 1550 x 4130 mm,
Weight: 13200 kg.
 
  78
IDMI6352
MakeH.Cegielski
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle size:90 mm,
Spindle taper: MT5,
Arm length:2000 mm,
Height:1500 mm,
Drill dia:75 mm
 
  79
IDMI6351
MakeWMW,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle size:90 mm,
Spindle taper: MT5,
Arm length:1500 mm,
Height:1200 m,
Drill capacity:75 mm
 
  80
IDMI6333
MakeMas,Czech
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
Spindle size: 70 mm,
Spindle taper: MT4,
Arm length:1000 mm,
Height:1000 mm,
Drill capacity:50
 
  81
IDMI6332
MakeKolb,German
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
Spindle size: 90 mm,
Spindle taper: MT5,
Arm length:2000 mm,
Height: 1800 mm
Drill capacity: 75
 
  82
IDMI6331
MakeKolb,German
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
Spindle size: 110 mm,
Spindle taper: MT6,
Arm length: 3000 mm,
Height: 2500 mm,
Drill capacity: 85 with drive.
 
  83
IDMI6262
MakeCsepel,Hungary
ModelRFH100/3000
YOM
Condition
PhotoSee Photo
Drilling dia : 100 mm,
Arm length : 3000 mm.
 
  84
IDMA28134
MakeRussian
Model2A576
YOM
ConditionGood Condition
PhotoSee Photo
Drilling diameter in steel: 80 mm,
Drilling diameter in cast iron: 100 mm,
Spindle torque: 1600 Nm,
Axe spindle's travel: 500 mm,
Head's travel along the arm: 2000 mm,
Arm's length: 4180 mm,
Arm's travel along the column: 1100 mm,
Main drive power: 7,5 kW,
Dimensions; 4180 x 1280 x 4125 mm,
Weight: 11850 kg
 
  85
IDMA28094
MakeCsepel,Hungary
ModelRFH100/2250
YOM
Conditionexcellent working condition
PhotoSee Photo
Spindle dia : 100 mm,
Arm length: 3000 mm.
 
  86
IDMI6243
MakeKitchen & Walker
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity: 75 mm,
Arm length 1600 mm,
with drilling table.
 
  87
IDMI6239
MakeMas,Czech
ModelVR6A
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 60 mm,
Arm length : 2000 mm,
Working height : 1000 mm.
 
  88
IDMI6238
MakeCsepel,Hungary
ModelRFH50/1600
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 50 mm,
Length arm : 1600 mm.
 
  89
IDMI6237
MakeEMA Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 60 mm,
Arm length : 1200 mm,
With box table.
 
  90
IDMI6233
MakeGraffenstaden
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 75 mm,
Arm length : 1850 mm.
 
  91
IDMA28015
MakeCsepel,Hungary
ModelRFH100/3000
YOM1983
ConditionGood Condition
PhotoSee Photo
Max. Drilling dia : 100 mm,
Arm length : 3000 mm.
Qty 2 nos.
 
  92
IDMA27859
MakeRussian
Model2A587
YOM1985
ConditionGood Condition
PhotoSee Photo
The diameter of the drilling steel : 100 mm,
Drilling capacity in cast iron : 125 mm,
Spindle torque : 2800 Nm,
The axial force on the spindle : 50000 n,
Power of main motor : 11 kW,
Axial movement of the spindle : 630 mm,
Moving head on the sleeve : 2635 mm,
Move the hose through the column : 1500 mm,
The rotation of the sleeve around the column : 360 deg
Spindle speed : 8-1600 rev/min,
Number of spindle speeds : 24,
Spindle feed per minute : 2-1600 mm/min,
Number of spindle Besstup innings,
Spindle taper ISO 50,
Length : 4880 mm,
Width : 1630 mm,
Height : 4912 mm,
Weight : 17150 mm.
 
  93
IDMI6154
MakeCsepel,Hungary
ModelRF51B
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 120 mm,
Arm length : 3000 mm,
With Tapping attachment,
With tilting table.
 
  94
IDMI6151
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Max. Drilling dia : 100 mm,
Arm length : 3000 mm
With Box Table
 
  95
IDMI6134
MakeKolb,German
ModelHK80
YOM
ConditionGood Condition
PhotoSee Photo
Capacity steel : 100 mm,
Arm length : 3000 mm,
Arm travel : 2400 mm,
Vertical travel : 1300 mm,
Column diameter : 700 mm,
Spindle speeds : 19-1250 rpm,
Main motor : 15 HP,
Spindle taper : MT 5,
Weight : 12000 Kg.
 
  96
IDMA27342
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 100 mm,
Arm Length : 3000 mm.
 
  97
IDMA27336
MakeCsepel,Hungary
ModelRF51B
YOM
ConditionGood Condition
PhotoSee Photo
Bore capacity in steel (diameter) : 100 mm,
Throat max : 3000 mm,
Workpiece height max : 440 - 2100 mm,
Spindle taper : MT 6,
Spindle turning speed range : 18 - 1800 U/min,
Quill stroke : 400 mm,
Surface area : 3160 x 1550 mm,
Feed range - boring : 0,0375 - 2 mm/min,
Voltage : 380 V,
Distance spindle - column min./max : 400 - 2850 mm,
Total power requirement : 13 kW,
Dimensions of the machine ca. : 4,39 x 1,55 x 4,13 m,
Weight of the machine ca : 13,2 t.
 
  98
IDMA27254
MakeSoraluce,Spain
ModelTR3-2500
YOM
ConditionGood Condition
PhotoSee Photo
Drilling in steel : 80 mm,
Drilling in cast : 100 mm,
Arm length : 2500 mm,
Spindle travel : 450 mm,
Dia. drill spindle : 110 mm,
Taper Morse : 6,
Main motor power : 7.5 KW (10HP),
Length of bed : 6000 mm,
The column is moving on : 6 m bed.
 
  99
IDMA27178
MakeCsepel,Hungary
ModelRFH75
YOM
ConditionGood Condition
PhotoSee Photo
Bore capacity in steel (diameter) : 75 mm,
Arm length : 1750 mm,
Spindle taper : MT6,
Turning speeds : 19-1900 rpm,
Boring depth : max.380 mm,
Vertical adjustment of the arm : 950 mm,
Feed : 0,047-2 mm/U,
Distance spindle /base plate : 370/1700 mm,
Weight of the machine : ca.6 t,
Dimensions of the machine l x w x h : ca. : 3100 x 1200 x 2450 m,
 
  100
IDMI6086
MakeCsepel,Hungary
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling Capacity : 50 mm,
Arm Length : 1300 mm.
 
  101
IDMI6085
MakeArchdale,England
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle Capacity : 60 mm,
Arm Length : 1800 mm.
 
  102
IDMI6084
MakeGSP
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling Capacity : 50 mm,
Arm Length : 1500 mm.
 
  103
IDMI6075
MakeCsepel,Hungary
ModelRFH75
YOM
Conditionexcellent working condition
PhotoSee Photo
Drill dia : 76 mm,
Swing of ram : 1750 mm.
 
  104
IDMI6042
MakeHMT,India
ModelRM 65
YOM
ConditionGood Condition
PhotoSee Photo
Spindle diameter : 65 mm,
Arm length : 2500 mm,
With Box table.
 
  105
IDMA26870
MakeCsepel,Hungary
ModelRFH100M
YOM
ConditionGood Condition
PhotoSee Photo
Steel drilling diameter : 100 mm,
Diameter with rough drilling : 170 mm,
Max. distance between spindle and column : 3000 mm,
Weight of the machine : 13200 kg.
 
  106
IDMA26796
MakeCsepel,Hungary
ModelRFH100/3000
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 100 mm,
Arm length : 3000 mm,
Quantity : 3 nos.
 
  107
IDMI5994
MakeCaser,Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 100 mm,
Arm length : 2500 mm.
 
  108
IDMI5993
MakeNovisa ,Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling dia : 100 mm,
Arm length : 2500 mm.
 
  109
IDMA26398
MakeCsepel,Hungary
ModelRFH100/3000
YOMOverhauled 2010
ConditionGood Condition
PhotoSee Photo
Max Spindle drilling dia : 100 mm,
ARM length : 3000 mm,
Spindle taper : M6.
 
  110
IDMA26380
MakeCsepel,Hungary
ModelRFH100/3000
YOM1981
ConditionDismantled,Good condition
PhotoSee Photo
Drilled capacity of steel / cast iron : 100/120 mm,
Drilled diameter with pre drill of steel / cast iron : 170/200 mm,
Thread cutting of steel/cast iron : 100/125 mm,
Drilling radius : 3000 mm,
Work piece height : 440...2100 mm,
Min. spindle distance from column : 540 mm,
Spindle turning speed range : 18...1800 rpm,
Spindle taper : 6 MT,
Quill stroke : 400 mm,
Column diameter : 600 mm,
Foundation size for work piece clamping : 3160 x 1550 mm,
Main drive power : 13 kW,
Machine dimensions : 4390 x 1550 x 4130 mm,
Machine weight : 13200 kg.
 
  111
IDMA26378
MakeMAS,Germany
ModelVR10
YOM1961
ConditionGood condition,under power
PhotoSee Photo
Spindle diameter : 100 mm / MK6,
Arm length : 4000 mm,
Weight of the machine : 18 tons.
 
  112
IDMI5859
MakeKolb,German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling Capacity : 50 mm,
Arm Length : 1000 mm.
 
  113
IDMI5858
MakeCsepel,Hungary
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 50 mm,
Arm Length : 1400 mm,
Clamping : Hydraulic
 
  114
IDMI5857
MakeMas,Czech
ModelVR4A
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 40 mm,
Arm length: 1250 mm.
 
  115
IDMI5855
MakeMas,Czech
ModelVR4
YOM
ConditionGood Condition
PhotoSee Photo
Drilling Capacity : 40 mm,
Arm Length : 1250 mm.
 
  116
IDMA25942
MakeCsepel,Hungary
ModelRFH100/3000
YOM1976
ConditionGood Condition
PhotoSee Photo
Spindle dia : 100 mm,
Arm length : 3000 mm.
 
  117
IDMI5761
MakeMas,Czech
ModelVR8A
YOM
ConditionVery good condition
PhotoSee Photo
Drilling Capacity : 80 mm Steel,
Arm Length : 2500 mm.
 
  118
IDMI5760
MakeMas,Czech
ModelVR6A
YOM
ConditionVery good condition
PhotoSee Photo
Drilling Capacity : 60 mm Steel,
Arm Length : 2000 mm.
 
  119
IDMI5759
MakeMas,Czech
ModelVR6
YOM
ConditionVery good condition
PhotoSee Photo
Drilling Capacity : 60 mm Steel,
Arm Length : 2000 mm.
 
  120
IDMI5669
MakePoreba Poland
Model
YOM
ConditionGood Condition
PhotoSee Photo
Spindle Dia : 40 mm,
Spindle size : 85 mm,
Arm Size : 1600 mm,
Height Size : 1350 mm,
Clamping Table Areas : 1600 x 960 mm,
Number of slots : 3 Nos.
 
  121
IDMA23355
MakeRussian
ModelTUGR80-SP
YOM
ConditionExcellent
PhotoSee Photo
Heavy Duty Universal Portable Radial Dril - 50 Working Hours only.
Max drilling capacity in R=60-70 Kg steel with 0,3 mm/rev. feed : 80 mm, Tapping capacity : 80M, Spindle travel : 400 mm, Spindle taper : Morse 5, Spindle diameter : 80 mm, Spindle speeds values to be selected on switch-board : 10-12-16-20-25-31,5-40-50-63-80-100-125-160-250-315-400-500-630-1000), N. 8 Feeds each spindle rev. 0,1-0,14-0,20-0,28-0,4-0,56-0,8-1,2 mm With direct manual selection, Min distance spindle axis /column axis : 1150 mm, Max distance spindle axis / column axis : 1930 mm, Min distance spindle nose/ ground floor (spindle out) : 100 mm, Max distance spindle nose/ ground floor (spindle in) : 1780 mm, Min distance from spindle axis to floor (horizontal spindle) : 450 mm, Max distance from spindle axis to floor (horizontal spindle) : 2800 mm, Vertical travel of arm : 1250 mm, Travel of column on bed : 1620 mm, Spindle head tilting (90 up and 90 down) : 180, Arm tilting : 0, Spindle head rotation : 360, Column rotation : 360, Column diameter : 400 mm, Machine Height : 3600 mm, Base height : 250 mm, Bed size without outside bearings : 900 x 3250 mm, Max drilling thrust with spindle in vertical position : 1900 kG, Max transmissible torque : 140 Kgmt, Head rapid rotation : degree/min 500,
Head slow rotation : 4,
Head rapid tilting,
Head slow tilting,
Arm horizontal rapid traverse : 1200 mm/min,
Arm horizontal slow traverse : 44 mm/min,
Arm vertical rapid traverse : 1200 mm/min,
Arm vertical slow traverse : 32 mm/min,
Traverse of radial drill on bed : 2250 mm/min,
Slow traverse of radial drill on bed : 70 mm/min,
Spindle driving motor : 7.5 HP,
Arm vertical rapid traverse motor : 5.5 HP,
Arm vertical slow traverse motor : 0,25 HP,
Arm horizontal rapid traverse motor : 2.5 HP,
Arm horizontal slow traverse motor : 0.25 HP.
 
  122
IDMA23335
MakeBreda
ModelR2500P
YOM1986 (approx)
ConditionGood condition,under power
PhotoSee Photo
Drilling capacity in steel 65 mm, Drilling capacity in cast iron 85 mm - 90 mm, Arm Length : 2500 mm, Sleeve diameter - 430 mm, Spindle stroke - 16 spindle speeds 32-2000 rpm, Spindle taper - taper 5.
 
  123
IDMA22851
MakeTos Czech
ModelVO50
YOM1985
ConditionGood Condition
PhotoSee Photo
Bore capacity in steel 50 mm,
Arm length 1250 mm,
Working height max 1000 mm,
Turning speeds 28 - 2500 min,
Bore spindle morse taper 5 MK,
Engine output 4 kW,
Weight ca 4.5 t,
Range L x W x H : 3100 x 1120 x 2600 mm,
Floor plate size 2200 x 1000 mm,
Cube table 1020 x 760 x 500 mm.
 
  124
IDMA22850
MakeKolb,German
ModelHKH50/1250
YOM1972
ConditionGood Condition
PhotoSee Photo
Bore capacity in steel 50 mm,
Arm length 1250 mm,
Working height max 1630 mm,
Turning speeds 19 - 1320 min,
Bore spindle morse taper 5 MK,
Engine output 5.5 kW,
Weight 5 t,
Range L x W x H : 2,4 x 1,0 x 3,55 mm,
Feed movement 475 mm,
Floor plate size 1650 x 1000 mm,
Feeds 0,07-2,9 mm.
 
  125
IDMA22541
MakeKao Ming
ModelKMR1100S
YOM1991
ConditionGood Condition
PhotoSee Photo
Spindle head longitudinal travel 745 mm,
Vertical arm travel 700 mm,
Spindle travel 220 mm,
Morse taper in spindle (M.T) no 4,
Work area of base 1260x760 mm,
Motor for main spindle 2.2kw (3HP),
Spindle speed ranges 60HZ 49-1524rpm,
Spindle speed ranges 50HZ 41-1270rpm,
Spindle speed ranges (Steps) 9.
 
  126
IDMA21883
MakeSass
Model
YOM
ConditionGood Condition
PhotoSee Photo
MAX. WORKING DIA : 80/100 mm,
MAX. DISTANCE FROM SPINDLE TO COLUMN : 2545 mm,
MIN. WORKING RADIUS : 630 mm,
MAX. WORKING RADIUS : 2845 mm,
MIN. DISTANCE FROM SPINDLE TO TABLE : 550 mm,
MAX. DISTANCE FROM SPINDLE TO TABLE : 2150 mm,
SPINDLE TAPER - CM 6/102 mm,
SPINDLE TRAVEL : 500 mm,
SPINDLE SPEEDS - N. 32 18 - 1.600 RPM,
SPINDLE MOTOR POWER : 8.1 KW,
COLUMN DIA : 600 mm,
TOTAL WEIGHT : 10,500 KG.
 
  127
IDMI5484
MakeMas,Czech
ModelVR4A
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity- 50 mm, Working radius from column-1.250 mm, Spindle taper- 4 CM, Spdinle dia- 50 mm, 2 machines
 
  128
IDMI5442
MakeVRD
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity- 38 mm, Distance from spindle to column- 400 to 850, Diameter of column- 160 mm ,Spindle taper- MT-4, Spindle travel-180 mm, Spindle speed series- 8, Distance from spindle to working surface base- 150-950 mm, Dimension of work table- 380x290x290, Dimension of base- 1200x720x200, Overall size- 1300x900x200, Power of main motor- 1.5 HP, Net weight- 1000/800, Packing dimension- 1500x1100x2200
 
  129
IDMI5441
MakeVRD
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity- 38 mm, Distance from spindle to column- 400 to 850, Diameter of column- 160 mm, Spindle taper- MT-4, Spindle travel-180 mm, Spindle speed range- 75-2400 RPM, Spindle speed series- 8, Distance from spindle to working surface base- 150-950 mm, Dimension of work table- 380x290x290, Dimension of base- 1200x720x200, Overall size- 1300x900x2000, Power of main motor- 1.5 HP, Net weight- 800, Packing dimension- 1500x1100x2200
 
  130
IDMI5440
MakeNeco
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity- 40 mm, Distance from spindle to column- 320 to 1100, Diameter of column- 171, Spindle taper- MT-4, Spindle travel- 180, Spindle speed range- 79-1400, Spindle speed series- 8, Distance from spindle to working surface base-350-1000, Dimension of work table-590x3890x300, Dimension of base-1500x740x160, Overall size-1700x900x2150, Power of main motor- 2HP, Net weight- 1300/1100, Packing dimension- 1900x1100x2350
 
  131
IDMI5439
MakeNeco
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drilling capacity- 40 mm, Distance from spindle to column- 400 to 950, Diameter of column- 171, Spindle taper- MT-4, Spindle travel- 180, Spindle speed range- 79-1400, Spindle speed series- 8, Distance from spindle to working surface base- 280-970, Dimension of work table- 380x290x290, Dimension of base- 1200x760x170, Overall size- 1350x900x2150, Power of main motor- 2HP, Net weight- 1200/1000, Packing dimension- 1550x1100x2350
 
  132
IDMI5437
MakeNeco
Model
YOM
ConditionGood Condition
PhotoSee Photo
Drill capacity- 50 mm, Distance from spindle to column-300-1300, Diameter of column-280 mm, Spindle taper- MT-5, Spindle travel- 270 mm, Spindle speed range-35-1220, Spindle speed series- 12, Distance from spindle to working surface base- 350-1200, Dimension of work table- 600x500x500, Dimension of base- 1750x850x200, Overall size- 2100x1100x24000, Power of main motor- 3-H.P., Gross weight/Net weight- 3000/2500, Packing dimension-2300 x1050 x 2200
 
  133
IDMA20803
Make
ModelMGS50
YOMRetrofitted in 2008
ConditionGood Condition
PhotoSee Photo
Max drilling diameter in steel:50mm, Max threading diameter in steel:M48, TRavel of toolholder head: vertical:2725mm,Horizontal:2230mm, Main spindle taper:MORSE4, Drilling SPindle rotation around arm axis:360 degree, main motor power:4kW,Overall dimensions (LxWxH):3430x1375x2970mm, Weight:6,500kg
 
  134
IDMA20352
MakeRussian
Model2A576
YOM1992
ConditionGood Condition
PhotoSee Photo
max drill dia 75 mm , spindle overhang (the distance between the spindle axis and pillar surface) : 500 mm min , max 2000 mm , distance between the spindle end face and the base plate : min 400 mm , max 2000 mm , distance between the spindle end face and table 1500 mm max ,Drill head : spindle taperMprse No.6 , spindle stroke 500 mm , max travel of drill head 1500 mm , Arm: max vertical travel 900 mm , max angular rotation around the column 360 deg , table : table working surface : 630 x 800 mm , width of T slot 22 mm , number of slots 3+3 , slot to slot spacing 170 mm, base plate : working surface width 1250 mm , width of T slot 28 mm , number of slots 5 , slot to slot spacing 250 mm , speeds and feeds : number of spindle speeds 22 , spindle speed range 12.5 to 1600 RPM , number of spindle speeds 18 , spindle feed range 0.063 to 3.15 mm/rev , drill head rapid travel speed 5000 mm/min , arm rapid travel speed 750 mm/min , max drilling pressure 3200 kgf , max spindle torque 140 kgf.m , drive, dimensions and weight : three phase electric motors : main drive motor : power 7.5 kW , speed 1460 RPM , drive motor for rapid vertical travel of the arm (table) : power 3 kW , speed 1450 RPM , drive motor of drill head hydraulic station : power 0.8 kW , speed 1400 RPM , column clamping motor : power 0.5 KW , speed 1440 RPM , dia of circle circumscribed when the arm is swivelled through 360 deg 5690 mm , overall dimensions 3500 x 1550 x 3875 mm , weight 10 tons.
 
  135
IDMA20326
MakeAsquith
Model
YOM1963
ConditionVery good condition
PhotoSee Photo
Arm length- 2134 mm, Base area- 2032 x 1219 mm, Arm rise & fall- 1219 mm, Head traverse- 1549 mm, Input- 380/420/3/50 AC 5 hp, Spindle speeds- 31-830 rpm, Spindle rise & fall- 356 mm, Spindle bored- No. 5 morse taper, Throad- 1575 mm x 12134 mm, Fitted with:
Collant, box table, brake: Length- 3.2 m, Width- 1.37 m, Height- 4.27 m, Net weight approx- 9 ton (9144 kgs), Centre of column to spindle- 8 FT Max, Centre of column to spindle- 2.3 FT Min, No. 5 morse taper, Height of spindle to base- 7 FT 7 Max, Height of spindle to base- 1 FT 6 mIN, Horse Power- 7.5 HP
 
  136
IDMA20112
MakeRussian
Model2A554F1
YOM1991
ConditionGood Condition
PhotoSee Photo
drilling capacity : in steel 50 mm , in cast iron 63 mm , distance between center line of spindle and guide stanchions : max 1600 mm , min 375 mm , max weight of equipment which can be set on table 15 kg , dia of spindle quill 90 -_ 0,02 , distance between spindle nose and base plate 1600 mm , min 450 mm , spindle travel max 400 mm , spindle turning speed range 18-2000 mm/min ,total power of all electric motors 8,925 kW , overall dimensions 2850 x 1030 x 3430 mm ,mass without fixed equipment 4.7 tons .
 
  137
IDMA19944
MakeStanko-sedin
ModelH57
YOM1968
ConditionGood Condition
PhotoSee Photo
Drilling in steel St60 - 75 mm, overhang - 2000 mm, Spindle taper - MK6, spindle stroke - 450 mm, Range of speed - 12,5-1600 Rpm, Table size - 2065 x 1300 mm, Max. distance table spindle - 1800 mm, Drive capacity - 7,5 kW.
 
  138
IDMA19861
MakeRussian
Model2A554
YOM1991
ConditionExcellent
PhotoSee Photo
drilling capacity : in steel 50 mm , in cast iron 63 mm , distance between center line of spindle and guide stanchions : max 1600 mm , min 375 mm , max weight of equipment which can be set on table 15 kg , dia of spindle quill 90 -_ 0,02 , distance between spindle nose and base plate 1600 mm , min 450 mm , spindle travel max 400 mm , spindle turning speed range 18-2000 mm/min ,total power of all electric motors 8,925 kW , overall dimensions 2850 x 1030 x 3430 mm ,mass without fixed equipment 4.7 tons .
 
  139
IDMA19609
MakeRussian
Model2A554
YOM1989
ConditionGood Condition
PhotoSee Photo
drilling capacity : in steel 50 mm , in cast iron 63 mm , distance between center line of spindle and guide stanchions : max 1600 mm , min 375 mm , max weight of equipment which can be set on table 15 kg , dia of spindle quill 90 -_ 0,02 , distance between spindle nose and base plate 1600 mm , min 450 mm , spindle travel max 400 mm , spindle turning speed range 18-2000 mm/min ,total power of all electric motors 8,925 kW , overall dimensions 2850 x 1030 x 3430 mm ,mass without fixed equipment 4.7 tons .
 
  140
IDMA19410
MakeCsepel,Hungary
ModelRF51
YOM1980s
ConditionGood Condition
PhotoSee Photo
drilling dia 100 mm, Arm length 3000 mm. Qty : 2 Nos
 
  141
IDMA19369
MakeCsepel,Hungary
ModelRFH100
YOM
ConditionGood Condition
PhotoSee Photo
drilling dia 100 mm, throat 3000 mm ,
 
  142
IDMA19336
MakeTos Czech
ModelYR84
YOM1970
ConditionGood Condition
PhotoSee Photo
Drilling dia 150 mm,
Arm length 4000 mm
 
  143
IDMA19318
MakeMas,Czech
ModelVR6A
YOM1979
ConditionGood Condition
PhotoSee Photo
Drilling capacity in steel63 mm,in cast iron-80 mm, max distance from spindle to column 2000 mm, min distance from spindle to column 387 mm, max distance from spindle nose to table 1865 mm, min distance from spindle nose to table 540 mm,table dimensions 1080 x 2290, spindle speed range 11, 2-2000 min-1, rotational number of the spindle 16, number of feedings 16,range of feedings 0,035 2,8 min-1, max. vertical travel of the transverse 950 mm,Max. vertical travel of the spindle 380 mm,taper cone morse 5, power of el. motor 5,5 kW,overall dimensions 3240 x 1300 x 3900 mm, weight 5,800 kg.
 
  144
IDMA19275
MakeRussian
ModelRFH100
YOM1972
ConditionGood Condition
PhotoSee Photo
 
  145
IDMA19272
Make
ModelWR50/1.6
YOM
ConditionGood Condition
PhotoSee Photo
bore capacity in steel (diameter) 50 mm,
arm length 1600 mm,
weight of the machine ca. 4,7 t.
dimensions of the machine ca. 2700 x 1000 x 3500 mm.
Qty : 2 Nos.
 
  146
IDMA19271
MakeMAS,Germany
ModelVR103A
YOM
ConditionGood Condition
PhotoSee Photo
bore capacity in steel (diameter) 100 mm,
arm length 3000 mm,
weight of the machine ca. 15,2 t.
 
  147
IDMA19071
MakeCsepel,Hungary
ModelRFM51
YOM
ConditionVery good condition
PhotoSee Photo
Spindle dia : 100 mm,
Arm length 2500 mm,
Column travel 4000 mm,
2 Box tables.
 
  148
IDMA18968
MakeMas,Czech
ModelVOM50
YOM
ConditionGood Condition
PhotoSee Photo
drilling capacity in steel 600 Map ts 50 mm, drilling capacity in grey cast iron 250 MPA t.s 65 mm, tapping capacity in steel N/mm 48M, max vertical displacement (rise and fall) of arm 1250 mm, max motion of arm 900 mm,drilling head swivel 360 deg , max spindle travel 350 mm, max/min spindle reach 2070/1170 mm, max/min distance from spindle nose to base plate 1555/305 mm, taper in spindle Morse 5 , spindle speed range 16-800 /min , number of spindle speed steps 15 , number of feed rate steps 15 , number of feed rate steps 6 , feed rate range 0,05-0,5 mm/ot , main electric motor oputput 4 kW , total machine input 7,5 kVA , dimensions 3340 x 1325 x 3400 mm.
 
  149
IDMA18848
MakeMas,Czech
ModelVOM50
YOM
ConditionBrand New
PhotoSee Photo
Work range:
Drilling capacity in steel 600 Map t.s. 50 mm,
Drilling capacity in grey čst iron 250 Mpa t.s.65 mm,
Tapping capacity in steel 600 N/mm 48 M<
Max.vertical displacement (rise and fall)of the arm 1250 mm,
max.motion of the arm 900 mm,
Drilling head swivel 360,
Max.spindel travel 350 mm,
Max/min. spindle reach 2070/1170 mm,
Max./min.distance from the spindle nose to the base plate 555/305 mm,
Dimensions of the clamping of the base 2610x1050 mm,
Drillspindle Taper in spindle 5 MORSE,
Spindle speed range 16-800 1/min,
Number of spindle speeds steps 15n,
Speeds and shifts:
Number of feed rate steps 6n,
Feed rate range 0,05-0,5 mm/ot,
Main elektric motor output kW 4,
Total machine input 7.5 kVA,
Weight: Machine including the standard attachment 6570 kg.,
Dimensions of the machine(Length x width x height): 3340x1325x3400 mm,
Standard colour : Machine frame - RAL 7035,Fundament - RAL 5010.
 
  150
IDMA18734
MakeCarlton
Model3A
YOM
ConditionGood Condition
PhotoSee Photo
Arm length and column base 1800 x 425 mm,
vertical travel of spindle in head 450 mm,
bearing of head on arm 547 mm,
bearing of arm on column 850 mm,
spindle diameter 80 mm,
morse taper in spindle #5
motor 20 hp
spindle speeds 12 to 1200 rpm
area of base 1300 x 1050 mm,
face of column to center of spindle(min/max) 13 1/4 - 6'',
bearing of head on arm 581 mm,
max height over head 3500 mm,
height over column cap 3250 mm,
weight 23,000 lbs (approx).
 
  151
IDMA18632
MakeCsepel,Hungary
ModelRFH75
YOM
ConditionGood Condition
PhotoSee Photo
Spindle taper: MK6, Distance between column and spindle: 2000mm, Travel of the spindle: 380mm, Speed of the spindle: 19 til 1900rpm.
 
  152
IDMA18490
MakeMas,Czech
ModelVR6
YOM
ConditionGood Condition
PhotoSee Photo
Max. drilling diameter 60 mm, Parameters 63mm, Morse 5, Max. vertical arm adjustment 860 mm,
Max. motion of milling head on arm 1570 mm,
Main motor output Morse 5 kW,
Dimensions 3135 x 1100 x 3750 mm,
Machine weight 6.4 tons.
 
  153
IDMA18302
MakeRussian
Model2K52
YOM
ConditionGood Condition
PhotoSee Photo
MK 3; box table

 
  154
IDMA18198
MakeCsepel,Hungary
Model
YOM
ConditionGood Condition
PhotoSee Photo
Parameters d100, Arm length 3000 mm.
 
  155
IDMA18132
MakeRussian
Model2A554
YOM
ConditionGood Condition
PhotoSee Photo
drilling capacity : in steel 50 mm , in cast iron 63 mm , distance between center line of spindle and guide stanchions : max 1600 mm , min 375 mm , max weight of equipment which can be set on table 15 kg , dia of spindle quill 90 -_ 0,02 , distance between spindle nose and base plate 1600 mm , min 450 mm , spindle travel max 400 mm , spindle turning speed range 18-2000 mm/min ,total power of all electric motors 8,925 kW , overall dimensions 2850 x 1030 x 3430 mm ,mass without fixed equipment 4.7 tons - 2 nos
 
  156
IDMA18114
MakeBong Shin
Model
YOM
ConditionGood Condition
PhotoSee Photo
Arm length-1.6 mm, Spindle Motor-7.5 Kw, Drilling-95 mm, Tapping-80 mm.
 
  157
IDMA18113
MakeBong Shin
Model
YOM
ConditionGood Condition
PhotoSee Photo
Arm length-1.75 mm, Spindle Motor-7.5 Kw, Drilling-95 mm, Tapping-80 mm.
 
  158
IDMA18112
MakeBong Shin
Model
YOM
ConditionGood Condition
PhotoSee Photo
Arm length-2 mm, Spindle Motor-7.5 Kw, Drilling-95 mm, Tapping-80 mm.
 
  159
IDMA18109
MakeBong Shin
Model
YOM
ConditionGood Condition
PhotoSee Photo
Arm length-2.5 mm, Spindle Motor-7.5 Kw, Drilling-95 mm, Tapping-80 mm.
 
  160
IDMA17804
MakeMas,Czech
ModelVR4
YOM1980
ConditionGood Condition
PhotoSee Photo
drilling capacity 50 mm
arm length 1250 mm - 2nos
 
  161
IDMA17803
MakeCsepel,Hungary
ModelRF50/1250
YOM1980
ConditionGood Condition
PhotoSee Photo
drilling capacity 50 mm,
arm length 1250 mm,
with cube
 
  162
IDMA17801
MakeMas,Czech
ModelVO50
YOM1980
ConditionGood Condition
PhotoSee Photo
d50x1250
 
  163
IDMA17665
MakeShinNippon Koki,Japan
ModelRB3
YOM
ConditionVery good condition
PhotoSee Photo
Double Column , Table size 1700 x 3000 mm,
Between column 2200 mm.
 
  164
IDMA17620
MakeInfrateria
ModelGR820
YOM1984
Condition
PhotoSee Photo
Drilling capacity in steel 80mm,in cast iron 100mm,spindle sleeve stroke 400mm,coloumn dia. 500mm,drilling slide stroke on arm 1600mm,machine height 3775mm,arm stroke on coloumn 800mm,max/min distance from the base plate to the main spindle 400min/,main spindle taper MORSE 6,motor power 7.5 kW, machine wt. 8 tons approx.with accessories cubic table.
 
  165
IDMA17619
MakeInfrateria
ModelGR616
YOM1987
Condition
PhotoSee Photo
max. drilling cap in steel 60mm,incast iron 75mm,spindle sleeve stroke 320mm,coloumn dia, 360mm,drilling slide stroke on arm1250mm,machine height2965mm,arm stroke on coloumn 800mm,min/max distance from the base to the main spindle 350mm, main spindle tapper Morse 5,motor power 4 kW,wt. of machine 4.5 tons. Qty : 3 Pcs.
 
  166
IDMA17149
MakeRussian
Model2H55
YOM2007
ConditionGood Condition
PhotoSee Photo
Drilling Capacity : 50 mm, Distance from an axis of a spindle up to a forming column : 450-1600 mm, Working surface width 1000 mm , width of T slot 28 mm , number of slots 4 , slot to slot spacing 160 mm , speeds and feeds: number of spindle speeds 21 , spindle speed range 20 20000 RPM , number of spindle feeds 12 , spindle feed range 0.056 2.5 mm/rev , arm rapid vertical travel speed 1400mm/min , max drilling pressure 2000 kgf , spindle torque 71 kgf.m , Three Phase electric motors : main drive motor : power 4 kW , speed 1500 RPM , drive motor for rapid vertical travel of arm (table) power 2.2 kW , speed 1500 RPM, overall dimensions 2665 x 1030 x 3430 mm , weight 4.7 tons
 
  167
IDMA17146
MakeRussian
Model2M57-2
YOM1982
ConditionVery good condition
PhotoSee Photo
max drill dia 75 mm , spindle overhang (the distance between the spindle axis and pillar surface) : 500 mm min , max 2000 mm , distance between the spindle end face and the base plate : min 400 mm , max 2000 mm , distance between the spindle end face and table 1500 mm max ,Drill head : spindle taperMprse No.6 , spindle stroke 500 mm , max travel of drill head 1500 mm , Arm: max vertical travel 900 mm , max angular rotation around the column 360 deg , table : table working surface : 630 x 800 mm , width of T slot 22 mm , number of slots 3+3 , slot to slot spacing 170 mm, base plate : working surface width 1250 mm , width of T slot 28 mm , number of slots 5 , slot to slot spacing 250 mm , speeds and feeds : number of spindle speeds 22 , spindle speed range 12.5 to 1600 RPM , number of spindle speeds 18 , spindle feed range 0.063 to 3.15 mm/rev , drill head rapid travel speed 5000 mm/min , arm rapid travel speed 750 mm/min , max drilling pressure 3200 kgf , max spindle torque 140 kgf.m , drive, dimensions and weight : three phase electric motors : main drive motor : power 7.5 kW , speed 1460 RPM , drive motor for rapid vertical travel of the arm (table) : power 3 kW , speed 1450 RPM , drive motor of drill head hydraulic station : power 0.8 kW , speed 1400 RPM , column clamping motor : power 0.5 KW , speed 1440 RPM , dia of circle circumscribed when the arm is swivelled through 360 deg 5690 mm , overall dimensions 3500 x 1550 x 3875 mm , weight 10 tons
 
  168
IDMA17112
MakeRussian
Model2A576
YOM1986
ConditionGood Condition
PhotoSee Photo
max drill dia 75 mm , spindle overhang (the distance between the spindle axis and pillar surface) : 500 mm min , max 2000 mm , distance between the spindle end face and the base plate : min 400 mm , max 2000 mm , distance between the spindle end face and table 1500 mm max ,Drill head : spindle taperMprse No.6 , spindle stroke 500 mm , max travel of drill head 1500 mm , Arm: max vertical travel 900 mm , max angular rotation around the column 360 deg , table : table working surface : 630 x 800 mm , width of T slot 22 mm , number of slots 3+3 , slot to slot spacing 170 mm, base plate : working surface width 1250 mm , width of T slot 28 mm , number of slots 5 , slot to slot spacing 250 mm , speeds and feeds : number of spindle speeds 22 , spindle speed range 12.5 to 1600 RPM , number of spindle speeds 18 , spindle feed range 0.063 to 3.15 mm/rev , drill head rapid travel speed 5000 mm/min , arm rapid travel speed 750 mm/min , max drilling pressure 3200 kgf , max spindle torque 140 kgf.m , drive, dimensions and weight : three phase electric motors : main drive motor : power 7.5 kW , speed 1460 RPM , drive motor for rapid vertical travel of the arm (table) : power 3 kW , speed 1450 RPM , drive motor of drill head hydraulic station : power 0.8 kW , speed 1400 RPM , column clamping motor : power 0.5 KW , speed 1440 RPM , dia of circle circumscribed when the arm is swivelled through 360 deg 5690 mm , overall dimensions 3500 x 1550 x 3875 mm , weight 10 tons.
 
  169
IDMA17100
MakeRussian
Model2H55
YOM1973
ConditionGood Condition
PhotoSee Photo
Working surface width 1000 mm , width of T slot 28 mm , number of slots 4 , slot to slot spacing 160 mm , speeds and feeds: number of spindle speeds 21 , spindle speed range 20 20000 RPM , number of spindle feeds 12 , spindle feed range 0.056 2.5 mm/rev , arm rapid vertical travel speed 1400mm/min , max drilling pressure 2000 kgf , spindle torque 71 kgf.m , Three Phase electric motors : main drive motor : power 4 kW , speed 1500 RPM , drive motor for rapid vertical travel of arm (table) power 2.2 kW , speed 1500 RPM, overall dimensions 2665 x 1030 x 3430 mm , weight 4.7 tons
 
  170
IDMA17099
MakeRussian
Model2L53U
YOM1982
ConditionGood Condition
PhotoSee Photo
drilling dia 32 mm, spindle outlet 1000 mm, spindle travel 320 mm, power of main motor 3 kW , limit of spindle rotation 45-2000 turn/min , dimensions 1850 x 800 x 2600 mm, weight 2.15 tons.
 
  171
IDMA17091
MakeOgawa
ModelHORD1400
YOM
ConditionVery good condition
PhotoSee Photo
 
  172
IDMA16976
MakeStankoimport
Model2M57
YOM
ConditionComplete
PhotoSee Photo
Spindle : 100 mm,
Weight : cca. 10tons,
 
  173
IDMA16806
MakeKerry
ModelR4
YOM
ConditionVery good condition
PhotoSee Photo
Column mounted table with support,
Very clean, clean table.
 
  174
IDMA16300
MakeCincinnati,USA
ModelHD8' x 20
YOMBrand New
ConditionBrand New
PhotoSee Photo
2400 x 500 mm Large Heavy Duty Radial Drill.

Drilling Capacity Steel/Cast Iron 75/93.75 mm,
Column Diameter 500 mm,
Horizontal Head Travel 2150 mm,
Spindle Speeds (16) 20 to 2180 RPM
Spindle Stroke 400 mm,
Spindle Feeds (18) .0015 to .125 IPR
Spindle Taper 5 MT
Spindle Center to Column Max 2575 mm,
Spindle Nose to Base Max 1850 mm,
Overall Height (Floor to Top of Column) 3125 mm,
Base Dimensions 3600 x 1225 x 275 mm,
Weight 20000 LBS
FEATURES AND EQUIPMENT:
15 HP Motor, Electrical Controls, Power Elevation With Safety Nut, Electro-Mechanical Clamping Of Head & Columnn & Arm, Hardened & Ground Steel Alloy Gears & Shafts, Spindle Is Mounted In 2 Sets Of Roller & Thrust Bearings, Double Wall Column With 360 Degree Rotation, Multi-Disc Clutch For Spindle Engaging & Reversal, Power Feed Safety Clutch, Head Moves On Bearings That Run On Hardened Wear Strip, Box Table & Coolant System
 
  175
IDMA16299
MakeCincinnati,USA
ModelHD7' x 20
YOMBrand New
ConditionBrand New
PhotoSee Photo
Large Heavy Duty 2100 x 500 mm Radial Drill.
Drilling Capacity Steel/Cast Iron 75 /93.75 mm,
Column Diameter 500 mm,
Horizontal Head Travel 1675 mm,
Spindle Speeds (16) 20 to 2180 RPM
Spindle Stroke 400 mm,
Spindle Feeds (18) .0015 to .125 IPR
Spindle Taper 5 MT
Spindle Center to Column Max 2100 mm,
Spindle Nose to Base Max 1650 mm,
Overall Height (Floor to Top of Column) 2925 mm,
Base Dimensions 3025 x 1225 x 250 mm,
Weight 16500 LBS
FEATURES AND EQUIPMENT:
15 HP Motor, Electrical Controls, Power Elevation With Safety Nut, Electro-Mechanical Clamping Of Head & Columnn & Arm, Hardened & Ground Steel Alloy Gears & Shafts, Spindle Is Mounted In 2 Sets Of Roller & Thrust Bearings, Double Wall Column With 360 Degree Rotation, Multi-Disc Clutch For Spindle Engaging & Reversal, Power Feed Safety Clutch, Head Moves On Bearings That Run On Hardened Wear Strip, Box Table & Coolant System
 
  176
IDMA15958
MakeCsepel,Hungary
ModelRFH100/3000
YOMOverhauled in 2008
ConditionGood working condition
PhotoSee Photo
spindle dia 65 mm, bore dia 110 mm, vertical sleeve travel 1260 mm, max distance from spindle to column 3000 mm, min 540 mm, number of turns of drilling spindle 21, speed range of drilling spindle/min : 18,22,4,28,35,5,45,56,
71,90,112,140,180,224, 280,355,450,560,710,
900,1120,1400,1800
, number of feeds 18, feed range mm/t.spindle : 0,0375-0,0,05-0,0625-
0,075-0,1-0,125-0,15-0,2-
0,25-0,3125-0,375-0,5-
0,625-0,75-1-1,25-1,5-2
, dia of cylindrical column 600 mm, max. distance from drilling spindle base plate 2100 mm, min: 440 mm, size of T type phase 28 , weight 13.2 tons, dimensions 4390 x 1550 x 4130 mm.
 
  177
IDMA15722
MakeSass
ModelTRP3000
YOM
ConditionGood Condition
PhotoSee Photo
drilling capacity 120 mm,
spindle connection c.m. 6,
spindle stroke 700 mm,
straddle 3000 mm,
vertical stroke 1000 mm,
clamping hydraulic,
spindle speed 13-1040 rpm,
cube.
 
  178
IDMA15501
MakeKolb,German
ModelMK6 x 4000
YOM
ConditionGood Condition
PhotoSee Photo
Spindle dia : 80 mm (approx.), Spindle taper : MK6, Arm Length : 4000 mm, Working height : 3500 mm, Longitudinal travel : 4500 mm, Spindle power : 15 kW, Total height : 6000 mm, Weight : 30 Tons.
 
  179
IDMA11264
MakeCsepel,Hungary
ModelBh100/3000
YOMBrand New
ConditionBrand New
PhotoSee Photo
Drilling Capacity in Steel 100 mm, Boring Capacity in Steel 170 mm, Drilling in Cast Iron 120 mm, Boring in Cast Iron 200 mm, Tapping in Steel 100 mm, Tapping in Cast Iron 125 mm, Arm Length 3000 mm, Spindle Stroke 400 mm, Speed 18 - 1800 RPM (Standard), Range of Feeds 0.037 - 2 mm/min (Standard), Max. Torque 1400 Nm, Max. Drill Thrust 35 kN, Drilling Motor 15 kW, Elevation Motor 4 kW, El. Motor of the hydraulic locking 0.75 kW, Coolant Pump Motor 0.12 kW, Gross Weight 15100 kg, Overall Dimensions 4700 x 1800 x 4000 mm
 
  180
IDMA11263
MakeCsepel,Hungary
ModelBh75/2000
YOMBrand New
ConditionBrand New
PhotoSee Photo
Drilling Capacity in Steel 75 mm, Boring Capacity in Steel 125 mm, Drilling in Cast Iron 90 mm, Boring in Cast Iron 140 mm, Tapping in Steel 60 mm, Tapping in Cast Iron 70 mm, Arm Length 2000 mm, Spindle Stroke 380 mm, Speed 19 - 1900 RPM (Standard), Range of Feeds 0.047 - 2 mm/min (Standard), Max. Torque 800 Nm, Max. Drill Thrust 24 kN, Drilling Motor 11 kW, Elevation Motor 3 kW, El. Motor of the hydraulic locking 0.6 kW, Coolant Pump Motor 0.12 kW, Gross Weight 7830 kg, Overall Dimensions 3600 x 1400 x 3375 mm
 
  181
IDMA11262
MakeCsepel,Hungary
ModelBh75/1750
YOMBrand New
ConditionBrand New
PhotoSee Photo
Drilling Capacity in Steel 75 mm, Boring Capacity in Steel 125 mm, Drilling in Cast Iron 90 mm, Boring in Cast Iron 140 mm, Tapping in Steel 60 mm, Tapping in Cast Iron 70 mm, Arm Length 1750 mm, Spindle Stroke 380 mm, Speed 19 - 1900 RPM (Standard), Range of Feeds 0.047 - 2 mm/min (Standard), Max. Torque 800 Nm, Max. Drill Thrust 24 kN, Drilling Motor 11 kW, Elevation Motor 3 kW, El. Motor of the hydraulic locking 0.6 kW, Coolant Pump Motor 0.12 kW, Gross Weight 7545 kg, Overall Dimensions 3350 x 1400 x 3375 mm
 
  182
IDMA11261
MakeCsepel,Hungary
ModelB50/1600
YOM
ConditionBrand New
PhotoSee Photo
Drilling Capacity in Steel 50 mm, Boring Capacity in Steel 100 mm, Drilling in Cast Iron 63 mm, Boring in Cast Iron 120 mm, Tapping in Steel 50 mm, Tapping in Cast Iron 60 mm, Arm Length 1600 mm, Spindle Stroke 300 mm, Speed 45 - 2000 RPM (Standard), Range of Feeds 0.05 - 1.25 mm/min (Standard), Max. Torque 300 Nm, Max. Drill Thrust 14 kN, Drilling Motor 4 kW, Elevation Motor 1.5 kW, El. Motor of the hydraulic locking 0.6 kW, Coolant Pump Motor 0.12 kW, Gross Weight 3650 kg, Overall Dimensions 2500 x 1300 x 3200 mm
 
  183
IDMA10647
MakeChinese
ModelZ30100X31
YOM
ConditionBrand New
PhotoSee Photo
Drilling dia 100 mm, distance between spindle axis & column (min-max) 570-3150 mm, distance between spindle nose & working surface of base plate 750-2500 mm, vertical travel of radial arm 1250 mm, travel of spindle head along arm 2580 mm, column dia 700 mm, spindle dia 112 mm, spindle travel 500mm, spindle taper Morse No.6, range of spindle speed 8-1000 RPM, steps of spindle speeds 22, size of worktable 800 x 1000 mmm, main motor 15 kW, arm elevation motor 3 kW, dimensions of machine 4780 x 1630 x 4600 mm, weight of the machine 20 tons, Standard machine: box table, coolant system, foundation bolts, tools, Optional accessories; reducing sleeve, drift, tilting worktable.
 
  184
IDMA8159
MakeChinese
ModelZ3050 x 16/1
YOMBrand New
ConditionBrand New
PhotoSee Photo
Maximum drilling diameter 50mm
Distance between spindle axis & column 350 - 1600mm
Spindle travel 315mm
Distance between spindle nose and working surface of base plate 320 - 1220mm
Spindle taper No. 5
Range of spindle speeds 25 - 2000rpm
Number of spindle speeds 16
Range of spindle feeds 0.04 - 3.2 mm/r
Number of spindle feeds 16
Table size 500 x 630mm
Arm length 2140mm
Travel of spindle head 1250mm
Power of main motor 4 kW
 
  185
IDMA7919
MakeCarlton
Model1A
YOMNew
ConditionUnder power
PhotoSee Photo
column dia 275 mm , arm length 1200 mm , distance spindle to base 700 mm , distance spindle to base max 1400 mm , quill travel 287.5 mm , spindle speeds (12) 120-3000 RPM , spindle feeds (6) 6-25 IPM , spindle taper # 4MT , base size 900 x 1350 mm , Manual Clamping
Power Elevation
825 x 625 x 500 mm High T-Slotted Box Table
Built In Tap Leads:
Coolant Pump
5 HP Spindle Drive Motor
top