Category : Forging Equipment

Sub-Category : Part Former Cold

Total Machines Found : 31

Select | Machine Details
 
  1
IDMA34899
MakeSakamura
ModelBP-590 SSL
YOM
ConditionGood Condition
PhotoSee Photo
Forging Stations Five (does not include cutting/pressure processes)
Open Upset Diameter 80mm (tensile strength=less than 65 kg/mm2)
Bolt Shank 50mm-345mm (390mm when using material with black skin)
Transfer Length 450mm
PFA (blank length) 20mm-85mm
Forging Pressure 1,000,000 kgf (#3,#4 each 650,000 kgf)
Maximum Cutoff 50mm (tensile strength =less than 50kg/mm2)
Cutoff Length 50mm-450mm
Knife Dimensions 140mm x 5mmL
Quill Dimensions 135mm x 160mmL
Punch Dimensions 160mm x 365mmL (with carburized bushing) (pin lock type)
Die Dimensions 230mm x 550mmL (pin lock type)
Die Inner Diameter 252mm PKO
Amount 140mm
KO Amount 480mm* (spacer: if 50mmL, 150-480mm ; if 150mmL, 50-380mm
Production Rate 40 Pcs. / minute (fixed by pulley)
Main Motor Capacity 250 Kw (6p,480v, totally enclosed fan)
Ram Stroke 600mm
EQUIPPED WITH:
Sakamura Model MWR-120 Wire Straightener
with Coil Drum
Equipment Weight 10,000Kg
Compatible Wire Diameter 30mm-50mm
Coil Inner Diameter 970mm-1200mm
Coil Outer Diameter 1500mm (max.)
Loading Weight 3000Kg
Main Drum Length 2300mm
Feed Speed 6m/min
Main Motor Capacity 1.5Kw (4p)
Straightener Roll Adjustment-Hydraulic & Thread Adjustment
Wire Cutting Method- Hydraulic Cutter( with pole)
Material Stopper: Vertical and Horizontal Stoppers (items to check : horizontal stopper strength/weight)
Pinch Roll Fixing Method - Presently needs countermeasures
(fixer bolt comes loose)
 
  2
IDMA34284
MakeNational,USA
Model
YOM1970
ConditionExcellent
PhotoSee Photo
Number of forming dies: 6
Production per minute:40 70
Max. Cutoff diameter
Mild Steel (max)............................. 22.0 mm
Alloy Steel (max)............................ 19.0 mm
Maximum Cutoff Length...........................110.0 mm
Die diameter................................................ 120.6mm
Punch diameter........................................... 76.15mm
Maximum die kick-out length...................110.0 mm
Main Motor.................................................. 45.0kw
Net weight (approx).................................. 36,400.0kgs
Floor Space
Length...............................................6,274.0 mm
Width................................................ 2,718.0 mm

Complete with:
(6) Full forming dies
Universal style transfer system
Alloy steel bed frame
PKO in 4th station.
Closed bushing cutoff system
Independent timed knockouts
Over-arm heading ram
(5) roll power straightener (mounted on machine)
Individually adjustable punch holders
Operators Platform
Sound Enclosure
 
  3
IDMA34264
MakeSakamura
ModelBPF650SS
YOM2013
ConditionGood Condition
PhotoSee Photo
6 STATIONS
CUT DIA.27, LENGTH; 190
 
  4
IDMA29842
MakeNational,USA
Model750-5D-S1-CF
YOM1968
ConditionGood Condition
PhotoSee Photo
Number of Dies:5
Pieces per Minute:65
Cutoff Diameter @ 85,000 PSI:875"
Cutoff Length:375" - 4.000"
Kickout Length:1.000" - 4.000"
Electrical Specs:480/3/60
 
  5
IDMA29841
MakeNational,USA
Model750-5D-S1-CF
YOM1979
ConditionGood Condition
PhotoSee Photo
Number of Dies:5
Pieces per Minute:60
Cutoff Diameter @ 85,000 PSI:875"
Cutoff Length:375" - 4.000"
Kickout Length:1.000" - 4.000"
Electrical Specs:440/3/60
 
  6
IDMA29837
MakeNational,USA
Model750-5D-CF
YOM1970
ConditionGood Condition
PhotoSee Photo
Number of Dies:5
Pieces per Minute:65
Cutoff Diameter @ 85,000 PSI .750"
Cutoff Length:375" - 3.125"
Kickout Length:500" - 4.000"
Electrical Specs:440/3/60
 
  7
IDMA29836
MakeNational,USA
Model1250-5DCF
YOM1975
ConditionGood Condition
PhotoSee Photo
Number of Dies:5
Pieces per Minute:50
Cutoff Diameter @ 85,000 PSI:1.313"
Cutoff Length:375" - 9.500"
Kickout Length:1.750" - 9.000"
Electrical Specs:220/3/50
 
  8
IDMA29455
MakeRyazan Russia
ModelA0937
YOM
ConditionBrand New
PhotoSee Photo
Nut thread diameter: maximum М20 mm,
Diameter of formed component: maximum 40 mm,
Number of forming stations: 5,
Rated diameter of initial component: 1630 mm,
Maximum height of product: 24 mm,
Rated force: 5000 kN,
Punch kick-outs stroke: 36 mm,
Die kick-outs stroke: 49 mm,
Slide strokes per minute (adjustable), min-1:
- maximum: 80
- minimum: 40
Main drive electric motor power: 56* kW,
Machine overall dimensions in plan view, mm
- left-to-right: 6500*
- front-to-back: 4000*
- height above floor level 3400*
Cooling water pressure: 0,40,6 MPa
Electric equipment specifications:
- supply mains current requirements Alternating,
3-phase
- current frequency: 502% Hz,
- power mains voltage: 38010% V,
- control mains voltage: 24, DC v
 
  9
IDMA29454
MakeRyazan Russia
ModelA0939.01
YOM
ConditionBrand New
PhotoSee Photo
Flat to flat dimensions: max.41 mm,
Nut thread diameter: Max. M27,
Max. diameter of initial component: 37 mm,
Maximum nut height: 30 mm,
Number of forming stations: 5,
Rated force: 8000 kN,
Slide strokes per minute (adjustable) min-1:
-Maximum: 75,
-Minimum: 40,
Maximum stroke of punch kick-outs: 36* mm,
Maximum stroke of die kick-outs: 49* mm,
Upsetting slide stroke: 260 mm,
Main drive electric motor power: 75* kW,
Pressure in compressed air supply mains: 0.50.1 MPa,
Machine overall dimensions:
left to right: 810 mm,
front to back: 4800 mm,
height above floor level: 2670 mm,
Electric equipment specification:
-supply mains current requirements: Alternating.
3-phase
-frequency: 502% Hz,
-power mains:38010% V,
-control mains: DC,24 V
 
  10
IDMA29360
MakeNational,USA
Model750
YOM
ConditionGood Condition
PhotoSee Photo
5 Die,
Maximum cutoff diameter mild steel: 7/8"
Ally steel: 3/4"
Maximum cut off length: 4"
Maximum die kickout: 4"
Maximum production rate: 60-80 PPM,
Motor: 40 HP,
Total forging weight: 300 tons,
Approximate weigh: 66,000
Approximate dimensions: 8' w x 20' l x '10"
Equipped with:
Bushing cutoff,
Nut style transfer.
 
  11
IDMA29288
MakeJyouto
ModelNS5-16P
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 5 x 20 mm.
 
  12
IDMA29182
MakeNational,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Number of dies: 5
Pieces per minute: 75
Cutoff diameter@ 85,000 PSI: 0.625"
Cutoff length: 0.375"-2.500"
Kickout length: 0.188"-3.000"
Electrical specs: 380/3/50,
Includes: universal transfer,TKO, Slug discharge,Wire feeder and straightener
 
  13
IDMA29180
MakeNational,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Number of dies: 5
Pieces per minute: 100,
Cutoff diameter@85,000 PSI: 0.500"
Cutoff length: 0.219"-1.875"
Kickout length: 0.156"-2.000
Electrical specs: 380/3/50
Machine size: 500 5D CF
 
  14
IDMA28767
MakePeltzer & Ehlers
ModelGB30-5
YOM1980
ConditionVery good condition
PhotoSee Photo
Diameter range : 30 mm,
Number of dies : 5,
Number of stations (incl. cut off) : 6,
Cutting length : 260 mm,
Shaft length under head : 225 mm,
Output pieces/min : 80,
Press power : 480 to,
Stroke : 300,
Motor power : 124 KW,
Weight : 82000.
 
  15
IDMA28739
MakeMalmedie
ModelK64
YOM1978
ConditionGood Condition
PhotoSee Photo
Max wire diameter (70 kg/mm2) : 27 mm,
Max wire diameter (40 kg/mm2) : 29 mm,
Max cutoff length : 235 mm,
Max under head length : 180 mm,
Max ejection from punches : 70 mm,
Pieces/minute : 45-90,
Forging power : 380 ton,
Machine weight : 60 ton,
Bushing cutoff, trimming capability.
One 4 die.
 
  16
IDMA28493
MakeNational,USA
ModelM20-S2
YOM1989
ConditionExcellent
PhotoSee Photo
5 Die,
Cut off diameter: 1",
Cutoff length: 15/16",
Die KO; 1 3/8",
Across Hex flats: 1 3/16"
Pieces per minute: 105
Equipped with: Bushing cutoff
AC motor and controls
 
  17
IDMA28282
MakeNational,USA
Model1000
YOM
ConditionDismantled,Excellent condition,
PhotoSee Photo
5 dies,
Cut off dia: 28,5 mm,
Cut of length: 100 mm,
PKO: 50,
Dies kick out: 125 mm,
With electrical.
 
  18
IDMA28280
MakeMalmedie
ModelQPB101
YOM
ConditionGood Condition
PhotoSee Photo
4 dies,
Cut off dia: 17 mm,
New parallelogram transfer(like sacma),
Dies kick out: 120 mm
With electrical part
 
  19
IDMA28279
MakeNational,USA
Model750-S-S3
YOM
ConditionGood Condition
PhotoSee Photo
5 dies
Cut off: 22,
Cut off length: 80 mm,
Die kickout: 100 mm
PKO: 41,
Pieces for minute 100 mm
With electrical
 
  20
IDMA27860
MakeNational,USA
Model750-S1
YOM1974
ConditionGood Condition
PhotoSee Photo
Cutoff dia-Mild steel: 1"
Cutoff dia- Alloy steel: 7/8"
Max. kickout length: 4"
Min kickout length: 1"
Max. cutoff length: 4"
Production Speed: 40-65 PPM,
Floor space: 21' L x 9'W,
Weight approx: 86,000 LBS
 
  21
IDMA26885
MakeNational,USA
ModelHSBM5S3
YOM1975
ConditionGood Condition
PhotoSee Photo
Diameter range : 8 mm,
Number of dies : 3,
Number of stations : 4,
Cutting length : 59 mm,
Shaft length under head : 40 mm,
Max. width acros flats : 13 mm,
Max. thread length : 40,
Output - pieces/min : 300
Motor power : 18,5 KW,
Weight : 11000 kg.
 
  22
IDMA26848
MakeTaiwan
ModelBF36B-4S
YOMBrand New
ConditionBrand New
PhotoSee Photo
Forging station : 4,
Cut-off dia max : 29 mm,
Cut off length : 320 mm,
Kick cut length : 280 mm,
Punch kick out length max : 60 mm,
Cut off quill dia x length : 90 x 140 mm,
Main die dia x length : 160 x 294 mm,
Center distance between dies : 174 mm,
Punch hole dia x length : 105 x 232 mm,
Ram stroke : 440 mm,
Forging power : 320 mm,
Max & Min, Socket length : 250 x 60 x 60 mm,
Output pcs minute : 60,
Main motor : 125 HP,
Lubricating motor : 2 x 2 HP,
Cooling motor : 1 HP,
Lubricant : 500,
Coolant : 600,
Floor area required length x width : 15 x 8 mm,
Weight of machine : 110,000 kg.
M16~M24 x 250 mm,
Air clutch / Brake system,
Inverter,
Horizontal type K.O,
New Pneumatic Cylindel Driver,
Conveyer,
Centrifugal oil cleaner,
Testing tool x 1 set.
 
  23
IDMA19120
MakeChimkent
ModelA1221A
YOM
ConditionGood Condition
PhotoSee Photo
Bolt Cold Former :Nominal effort 125 kN
Maximum bolt diameter 12 mm
Maximum bolt length 120 mm
Capacity 110-160 pcs/min
Main motor power 19 kW
Overall dimensions 385021302180 mm
Weight of the machine 16500 kg

 
  24
IDMA19119
MakeAT.J. Hanrez Despaigne
ModelPRLC
YOM1968
ConditionGood Condition
PhotoSee Photo
4 Posts Bolt Cold Former: Maximum thread 24 mm
Maximum bolt length 180 mm
 
  25
IDMA19118
MakeChimkent
ModelA1821
YOM
ConditionGood Condition
PhotoSee Photo
Nut Cold Former :Nominal effort 220 kN
Maximum thread M12 mm
Number of strokes per minute 80 min-1
Ram stroke 125 mm
Capacity 80 pcs/min
Total power requirement 17,5 kW
Overall dimensions 438025251290 mm
Weight of the machine 21500 kg
Accessories

- 4 forming and 1 cutting posts

 
  26
IDMA19117
MakePeltzer & Ehlers
ModelNM3
YOM1975
ConditionGood Condition
PhotoSee Photo
Maximum thread M16 mm ,
Nominal effort 200 kN ,
Number of strokes per minute 120 min-1 ,
Accessories :

4 forming and 1 cutting posititons

 
  27
IDMA18965
MakeRussian
Model
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max dia of product 16 mm, rated force 100 tons , max dia of initial slug σВ ≤ 250МPа 16 mm, max length of slug being cut 50 mm, slide strokes 60...150 /min , upsetting slide stroke 120 mm, main drive electric motor power 22 kW , overall dimensions 3690 x 2150 x 2020 mm.
 
  28
IDMA14434
MakeRussian
ModelYAO6017B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity of press, MT (ts): 24 (24000) +/- 5,8,
Capacity of 4 reciprocal-speedup cylinders, MT (ts)
- on approaching 4,5 (450) +/- 0,33,
-on returning 2,5 (250) +/- 0,19,
Maximum specific pressure on a pre-form, MPa (kgs/ cm2) to 100 (up to 1000) +/- 2,4,
Cross-bar strike, mm 700 +/-2,5,
Table movement, mm 5500 +/-10,
Velocity of a cross-bar strike, mm/sec
- on approaching 74 +/-10
- on return 100 +/-10,
Velocity of table movement, mm/s 600 +/-10,
Maximum height of the stamped detail, mm Up to 200,
Table dimensions, mm
- length 2100
- width 1330
- rounding radius 665,
Quantity of tables, pcs 4,
Open stamp height, mm 350 +/-1,7,
Hydraulic circuit pressure, MPa (kgs/ cm2)
- of pumps 28 (280) +/-1.85
- of multiplicator Up to 100 (1000) +/-2.4,
Installed capacity, kw 1244 +/-62,
Water flow for cooling, m3/h 22,
Cycle time (theoretical), sec
- with maximally charged table 70 +/- 1
- with empty table 75 +/- 1,
Press external dimensions with hydraulic circuits, mm
- width 13260 +/-150
- length 31260 +/-300
- height above floor level 4655 +/-45
- foundation embedding 5420 +/-65
Press mass (with accesories), t 945 +/-10,
Mass of proper press, t 807 +/-8,
 
  29
IDMA7846
MakeRussian
ModelAA9035
YOM
ConditionBrand New
PhotoSee Photo
6 station 315 tons Cold Former , 1. Maximum outside diameter a part formed, mm 30
2. Forming stations number 6
3. Maximum slug diameter, mm
for steel with a σв≤ 60kg/mm2 )
28
4. Maximum length of slug, mm 100
5. Rated force, kN 3150
6. Die knock-outs maximum stroke, mm 120
7. Punch knock-outs maximum stroke, mm 35
8. Slide strokes per minute (adjustable), min-1
maximum
minimum
60
40
9. Main drive electric motors power, kW 75
10. Total electric motors power, kW 79.87
11. Cold Former overall dimensions complete with a conveyor,
a loading hopper and a sound enclosure, mm:
left-to-right
front-to-back
height above floor level
8270
8100
3800
12. Weight of the Cold Former 74200
 
  30
IDMA7845
MakeRussian
ModelAO937
YOM
ConditionBrand New
PhotoSee Photo
Brief information on Equipment Components:
Straightening-uncoiling device is designed to straighten the coil front end of a cut bent (unstraightened) area, to feed the material to the feeding rolls of the Cold Former and to further uncoil the material.
The device drive is an adjustable and reversing one.
Specifications :
1. Diameter of the material, mm:
maximum 30,
minimum 16,
2. Coil diameter, mm:
OD, maximum 1600,
ID, minimum 800,
3. Maximum coil height, mm 1200,
4. Maximum coil weight, kg 2500,
5. Coil winding direction LH, RH

6. Drive electric motor power, kW 5,5,
7. Compressed air consumption, m3 /h 0,01,
8. Overall dimensions of the device, mm
left - to - right 3815,
front -to - back 1750,
height 2970,
9. Maximum height above floor level, mm 2830 .
Cold Former Model А0937
The Cold Former is designed to produce workpieces of nuts holed for thread; bushes; rollers and shouldered parts etc.
Employed in the Cold Former is a centralized oil lubrication system provided with necessary interlocking devices designed to stop the Former operation in case of no oil in the system.
The Cold Former control is based on a programmable controller S7-300 from Siemens.
Operation date input, working status display and failure messages are via an operator control panel arranged on the control desk.
Electric cabinet, control desk and terminal boxes are of IP54 protection class from Rittal.
Specifications :

Max diameter of the workpiece produced, mm 40 ,
Number of forming stations, pcs 5,
Max slug diameter, mm 30,
Max workpiece height, mm 24,
Rated force, kN 5000 ,
Slide strokes per minute (adjustable):
maximum 80,
minimum 40,
Main drive electric motors power, kW 55

Cold Former overall dimensions:
left-to-right 65500 ,
front-to-back 3000,
height above floor level 3400,


 
  31
IDMA7844
MakeRussian
ModelAB0924A
YOM
ConditionBrand New
PhotoSee Photo
4 Station 500 tons Cold Former,Uncoiler/Straightener Unit is designed to straighten the front end of coil material, to cut-off a bent (not straightened portion) and to feed the bar into the feed rollers of the Cold Former; then the Uncoiler/Straightener Unit proceeds to uncoil the material.
The Uncloiler/Straightener Unit is equipped with an electric/mechanical adjustable reversible drive unit.
SPECIFICATIONS:

1. Bar stock diameter, mm:
maximum 40
minimum 16
2. Coil diameter, mm:
outside, maximum 1600
internal, minimum 800
3. Maximum coil height,mm 1200
4. Maximum coil weight, kg 2500
5. Coiling direction of cut-off unit LH, RH
6. Power of electric motor intended to drive the
mandrel, kW 5.5
7. Compressed air consumption, m 3/h 0.0
8. Uncloiler/Straightener Overall Dimensions, mm:
left-to-right 3815
front-to-back 1750
height 2970
9. Maximum height of Uncoiler/Straightener
above floor level, mm 2830
10. Weight of Uncoiler/Straightener Unit, kg 5000

3.2. Cold Former Model АБ0924А
The Cold Former is designed to produce semi-finished ball pins and M24x50220
bolts made of sized steel with ultimate strength of σT < 690 MPa.
The Cold Former consists of the following components:
Machine frame is a steel casting; all the other machine units are secured to the frame.
The frame is installed on a welded pan which serves also to collect oil leaks.
The machine is driven from an asynchronous motor with a frequency-adjustable drive via a V-belt drive.
The drive shaft is mounted in antifriction bearings; it is secured to the frame.
The flywheel is bracket-mounted on the cup fastened to the frame with the help of a cover plate; thus the flywheel weight and V-belt tensioning load are not applied to the drive shaft.
The brake pulley is bracket-mounted on the drive shaft.
The intermediate shaft is mounted in antifriction bearings in respective cups.
Rotation is transmitted to the longitudinal shaft via bevel gears.
Longitudinal and Cross Camshafts. Arranged on the longitudinal camshaft are the cluster cam of cut-off mechanism and two disks intended to inter-act with the induction limit switches (ILS)- one of them serves to send a command to arrest the slide in its dead back center, and the other to control the pusher stroke.
Arranged on the Cross Camshaft are the cluster cam of the knock-out device and the cluster cam intended to drive the workpiece transfer carriage.
The workpiece transfer mechanism is driven from the cross camshaft, and the tongs opening/closing drive is from the vertical camshaft via the cluster cam. The workpiece transfer drive is a crank-type unit equipped with a rack-and-pinion transmission.
The eccentric-type crankshaft runs in antifriction bearings.
The bearings employed in the crankshaft and conrod are provided with temperature control facilities.
The slide unit consists of a conrod and slide proper. Mounted in the slide are the arms of punch-knock-outs of the 1st ,2nd and 3d forming stations. On the 4th station a respective hole is provided in the slide to drop a trimmed part.
Employed in the machine is an rocking-type cut-off mechanism driven from a cluster-cam arranged on the longitudinal camshaft. The cut-off mechanism serves to cut-off a slug of required length and to feed it to the pusher center line. Used in the machine is a closed bushing-type cut-off system.
The trimming device is an integral part of the machine and is secured to the front wall of the frame between the conveyor and the thread rolling device.

The thread rolling device serves to roll thread on bolts formed with the help of respective flat dies.

Employed in the machine is a combined lubrication system: centralized recirculation oil lube system driven from an individual drive, intermittent manual grease lubrication with the help of grease gun.
Tools lubrication system (which is also a cooling system) is of closed recirculation type and is provided with individual drives. Provided in the lubrication system is a fluid consumption control feature; oil is collected in a separate reservoir in the machine pan.
The Cold Former is provided with a sound enclosure intended to reduce the noise level and also to exhaust oil vapours etc. from the forming zone.
The Cold Former control system is based on S7-Siemens programmable controller. Input and display of machine parameters are on the OP27 Siemens operator panel arranged on the control desk.
Electric cabinet, control desk and terminal boxes are from Rittal, Protection Class IP54
Specifications:
1. Bolt shank diameter, mm 24
2. Rated force, kN (ton force) 5000 (500)
3. Slug max. dia at GB690 MPa, mm 32 -0.16
4. Underhead length, mm 50-220
5. Max. length of slug, mm 245
6. Stroke of dies kick-outs, mm 228
7. Stroke of punch kick-outs, mm 60
8. Slide strokes per minute, adjustable , min -1 3060
Upsetting slide stroke, mm 360 to 0,7
9. Machine overall dimensions
complete with sound enclosure, mm
(sound enclosure included), mm:
left-to-right 9536
front-to-back 10295
10. Height above floor level, mm:
with jib-crane 4883
without jib-crane 3140
11. Weight, kg 120 000
top