Category : Forging Equipment

Sub-Category : Press Cold Forging

Total Machines Found : 50

Select | Machine Details
 
  1
IDMA33814
MakeTaiwan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 450 ton
Capacity: 600 ton
 
  2
IDMA33097
MakeAIDA,Japan
ModelFMX-L2-3000
YOM1988
ConditionGood Condition
PhotoSee Photo
3000 TON AIDA SSDC LINK MOTION 2 POINT TRANSFER PRESS, MODEL FMX-L2-3000(2)-220-135, 22.83" STR, 47.3" DIE HEIGHT, 2" ADJ, 86.6" LR X 53.2" FB BA,4 Stage Transfer, 14-20 SPM

22.83" STROKE
2" POWER RAM ADJUSTMENT
47.24" SHUT HEIGHT
14 - 20 SPM
86.6" x 53.15 BED
86.6" x 53.15" RAM
HYDRAULIC OVERLOADS
HYDRAULIC TIE ROD NUTS
MICRO INCHING
ROLLING BOLSTERS
LINK DRIVE
1990
AIDA 3 AXIS TRANSFER SYSTEM
54" WINDOWS
185 KW(2) 480/3/60
EQUIPPED WITH
6.35" THICK BOLSTER
MOTOR & ELECTRICS
SLIDE KNOCKOUT SPECIFICATIONS
TYPE PNEUMATIC T WING TYPE
CAPACITY 3 tf
STROKE 50 mm
DIAMETER OF KNOCKOUT PIN 60 mm
INSTALLED STAGES (2,3,4 STAGE)
BED KNOCKOUT SPECIFICATIONS
MECHANICAL TYPE
CAPACITY AT TOTAL STAGES 130 tf
STROKE 200 mm
DIAMETER OF KNOCKOUT PINS 60 mm
INSTALLED STAGES (1,2,3,4 STAGE)
TRANSFER FEEDER SPECIFICATIONS
3-AXIS TRANSFER DRIVE AIDA
FEED STROKE 400 mm
CLAMP STROKE PER SIDE 80 mm
LIFT STROKE 130 mm
DISTANCE BETWEEN BARS AT CLAMP 400 mm
FEED DIRECTION LEFT TO RIGHT
BOLSTER TO FEED BAR BOTTOM AT DOWN POSITION 790 mm
FEED BAR SECTION W X H 690 mm X 130 mm USING SPACE DIMENSIONS
ORIGINAL PRESS MANUALS & DRAWINGS INCLUDED
APPROX. HEIGHT ABOVE FLOOR 386"
 
  3
IDMI7195
MakeWetori
Model
YOM
ConditionGood Condition
PhotoSee Photo
Pressing Capacity : 800 ton
Pull- out Capacity : 60
Table area LRxFB : 900x1000
Stroke : 600
Daylight opening : 850
Descending speed : 350
Pressing speed : 15-30
Ascending speed : 300
Intensifier Capacity : 450
Die cushion capacity : 50
Cushion stroke : 200
Motor : 75
 
  4
IDMA31776
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1500 ton
Stroke: 250 mm
Die Height: 1030 mm
SPM : 25 - 40
Adjust: 50 mm
Bolster: 1500 x 1100
Slide: 1100 x 1100 mm

Bed Knockout: 100 tf
Knockout Stroke: 125 mm

Transfer Feed Stroke: 200 mm
Clamp Stroke: 100 mm
 
  5
IDMA31451
MakeAIDA
Model
YOM1981
ConditionDisassembled
PhotoSee Photo
MODEL: PK-1500
CAPACITY: 1,500TON
STROKE LENGTH: 220MM
STROKE SPEED: 15SPM
SLIDE DIMENSION: 706 x 1,000MM
BOLSTER DIMENSION : 780 x 1,000MM
DIE HEIGHT: 750MM
SLIDE ADJUSTMENT: 15MM
KNOCKOUT CAPACITY: 75TON
MAIN MOTOR: 100KW
 
  6
IDMA31178
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
250 tons , ram stroke 140 mm , 50 SPM , table size 400 x 500 mm , ram size 300 x 400 mm , shut height 350 mm , adjustment stroke 15 mm , motor power 22kW
 
  7
IDMA31166
MakeArisa
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity- 400 tons
point of strength : mm
energy available in blow to blow : 3695 kgm.
Energy available in continuous blow : 1595 kgm.
Speed : 30 gpm.
Demensions of the table ID x FA mm 950 x 860
HOLE OF THE TABLE ID x FA mm ----
dimensions of the base of the slide : ID
Distance from the window to the table FA mm 750 x 750
hole portatroqueles according to : DIN - 810 mm -----
Course : mm 300
Closing height on the table (Couso down and regulation up)
with the maximum course : mm 675
closing height on the table plate : mm 475
thickness of the table plate : mm 200
Closing height regulation : mm 150
step between posts : mm 950
Distance center of the car to uprights : mm 475
dimensions of the height windows Height x FA :mm -------
Distance from the window to the table : mm ------
service tension : v. 380
power line section : mm2 : 25
main engine : CV/rpm. : 50/1000
regulation of the relay against overloads : A. 90
motor line section : mm2 10
pneumatic line pressure : kg./cm2 6
pressure required for the brake-clutch : kg./cm2 5
necessary pressure for balancing of the Slide (without die) : kg./cm2 3.5
weight of the balancing die 1 kg./cm2 kg. 3545
trapezoidal belts pirelli : Kind c-162
weight of the press : kg. 34.000
With BOLSTER
 
  8
IDMA31165
MakeArisa
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity- 1250 tons
Point of strength : 7 mm
Intermediate Step : 1150 mm
Holes of the montants : 600x1000 mm
surface of the table plate : 1050x1200 mm
car surface : 900x1200 mm
course : 400 mm
closing height on the table : 800 mm
regulation of the car : 150 mm
floor height : 1100 mm
racing per minute : 30cr/min
total power of the steering wheel : 38,000 kgm
energy available in blow to blow : 16,300 kgm
Inertia running time : 0.3 sec
service tension : 380 v
Total height above ground : 6.9 m
total weight : 98,000 kg
electric power cable : 250 mm
pneumatic pipe : 3/4
Motor : Principal : 150 cv. : 750 r.p.m.
Regulation : 1 cv. : 1500 r.p.m.
lubrication installation :
main line pressure : 50 kg/cm2
Power Switch pressure maxima : 25 kg/cm2
deposit capacity : 200 liters
compressed air pressure : 5 kg/ cm2
Clutch utilization pressure : brake : 4/6 kg/cm2
With Bolster
 
  9
IDMA31164
MakeZdas
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity- 630 tons
Course : 400 mm
Closing Height : 800 mm
Carriage Regulation : 170 mm
force : 630 kn
Table Surface : 780x780 mm
Step between stiles : 1120 mm
Thickness Table : 250 mm
Motor Principle : 55 kw
Nş golpes x minuto : 20
 
  10
IDMA31062
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton
Stoke : 140 mm
SPM : 45
Die Height : 370 mm
Adjust : 15 mm
Slide : 500 x 370 mm
Bolster : 600 x 480 mm
 
  11
IDMA30997
MakeAIDA
Model
YOM1979
Condition
PhotoSee Photo
PK-630 MODEL
Capacity : 630 ton
Stroke : 180 mm.
Die Height : 420 mm.
Slide adjust : 40 mm.
Bolster size : 560x700 mm.
 
  12
IDMA30919
MakeAIDA,Japan
Model
YOM1982
ConditionGood Condition
PhotoSee Photo
Make:AIDA(Japan)
Model:PK-150
Slidse stroke:220mm
SPM:20
Bolster area:780mm x 1000mm(LR xFB)
Bolster thickness:200mm
Slide area:700x1000mm((LR xFB)
Dieheight: 750mm
Main motor:100KW x4P
Slide adjustment:15mm
(Knock out equipment)
Capacity:75ton(3units)
Knock stroke:70mm
Air pressure:5kg/cm2
Main motor: 100KW
Slide adjustment motor: 2.7 KW
(Dimension)
Approximately 4500mm x 5000mm x 6945mm(from floor)
 
  13
IDMA30855
MakeAIDA,Japan
Model
YOM1972
ConditionGood Condition
PhotoSee Photo
400 ton cold forging
 
  14
IDMA30687
MakeKomatsu
Model
YOM
Condition
PhotoSee Photo
Capacity

500 ton

Stroke

370 mm

SPM

20

Die Height

750 mm

Adjust

50 mm

Bolster

670 x 900 mm

Slide

780 x 600 mm

Front Opening

890 mm
 
  15
IDMA30663
MakeKomatsu
ModelMKR300
YOM1980
Condition
PhotoSee Photo
Max. ram force: 300 tons
Slide stroke: 200/320 mm
Number of stroke per minute: 30
Die height (stroke down, adjust up): 600/540 mm
Slide adjustment: 80 mm
Bolster area: 630x780x140 mm
Slide area: 610x600 mm
Distance between columns: 650 mm
Cushion bolster capacity: 25 t
Cushion stroke: 100 mm
Main motor: 55 kW
Power source: 380V/50Hz
Air pressure: 5,5 kg/cm2
Press weight: 22 t
Quantity:6 no
Condition: Mechanical part in good condition. Control cabinets incomplete. The main motors are on the presses.
 
  16
IDMI6853
MakeWilkins & Mitchell
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 800 Ton
Weight : 90 Ton (Approx)
Suspension : Single Point
Extrusion : 800 Ton
Width between : 41”
side frames
Stroke of Slide : 10”
Bolster Area : 42” ( Left / Right ) & 42” ( Front / Back )
Slide Area : 24” ( Left / Right ) & 24” ( Front / Back )
Height : 16.10 ft
Front : 7.9 ft
Width : 3.5 ft
Gear Diameter : 4.0 ft (Double Helical Gear)
Flywheel Diameter : 4 ft
Flywheel Width : 3.75 ft
Speed : 25 Strokes/Min
 
  17
IDMI6852
MakeCraig & Donald
Model
YOM
Condition
PhotoSee Photo
Capacity : 500 Ton, Weight: 40 Ton (Approx), Suspension: Single Point, Extrusion: 500 Ton, Width between : 31”
side frames, Stroke of Slide : 12”, Maximum Vertical : 36 ½”, Die Space
Bolster Area : 31” ( Left / Right ) & 31” ( Front / Back )
Slide Area : 24” ( Left / Right ) & 24” ( Front / Back )
Height : 3900 mm ( 12.8 ft )
Front : 1720 mm ( 5.6 ft )
Width : 1520 mm ( 5 ft )
Gear Diameter : 2600 mm ( 8.5 ft )
Gear Width : 440 mm ( 1.5 ft )
Flywheel Diameter : 1720 mm ( 5.6 ft )
Flywheel Width : 450 mm ( 1.5 ft )
Speed : 30 Strokes/Min
Ejector Capacity : 50 Ton through 2” Bottom Stroke : 6” Adjustment : 2”
Cold Forging Mechanical Press Machine with Pneumatic Multi Disc Clutch
& Break Facility
 
  18
IDMA30455
MakeVerson
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
Capacity : 1500 t,
Slide Stroke : 250 mm,
Die Height : 755 mm,
Slide Adjustment : 25 mm,
Rpm : 25/60hz,
Slide Size [Rl X Fr] : 1170 mm X 925 mm,
Bolster Size [Rl X Fr] : 1170 mm X 1120 mm,
Air Pressure : 5.0 kg/Square Centimeters,
Main Motor Power : 75 kw. 4p-60hz,
Height Of Press : 7800 mm,
Weight Of Press : 95 t.
 
  19
IDMA30336
MakeAIDA,Japan
ModelPK-VK400
YOM1965
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
SPM : 40,
Die Height : 370 mm,
Stroke Length : 140 mm,
Slide Area : 370 x 400 mm,
Bolster Area : 480 x 600 mm.
 
  20
IDMA30194
MakeAIDA,Japan
ModelPK40
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 140 mm,
SPM : 45,
Bolster : 400 x 600 mm,
Slide : 370 x 500 mm,
Die Height : 370 mm,
Adjust : 15 mm,
Knockout : 20 tons,
Knockout stroke : 70 mm,
Main Motor : 22 Kw x 4p.
 
  21
IDMI6530
MakeSmeral,Czech
ModelLKM1600G
YOM
ConditionGood Condition
PhotoSee Photo
Cold Forging / Warm Forging Press
for extrusion purpose with :-
Long Shut Height Kurimoto - Japanse Make Press on as is basis for immediate sale.
Capacity: 1600 ton,
Stroke: 320 mm,
Shut height: 1250 mm,
Regulation: 14 mm,
Continuous stroke: 40
Single stroke: 22,
Slide: 700 x 1140 mm,
Bed: 930 x 920 mm,
Knock out: 50 ton x 190 mm
1 ton x 215 mm
Motor rating: 3000 x 10 P,
Power pack: 20/mm,
Pump details.
 
  22
IDMA29399
MakeShli Taiwan
ModelKEP650
YOM
ConditionBrand New
PhotoSee Photo
Capacity : 650 tons,
Rated Tonnage Point :8.0 mm,
Stroke : 220 mm,
Stroke Per Minute : Standard Type with Fixed : 25 S.P.M / 60 HP Motor / Main Motor,
Die Height : 600 mm,
Slide Adjustment : 12 mm,
Bolster Area (L.R×F.B) : 700 × 600 mm,
Slide Area (L.R×F.B) : 900×840 mm,
Slide Adjusting Motor :1 HP,
Bolster Thickness : 200 mm,
Air Pressure : 5 kg/cm2,

Standard Accessories :-
Hydraulic Over Load Protector.
Against Over-Run Safety Device.
Pneumatic Counter Balancers.
Rotary Cam Limit Switch.
Crank Angle Indicator (Electric Type).
Die Height Indicator.
Magnetic Stroke Counter.
Automatic Recirculating Lubrication System.
Slide Adjust Device (Electrical).
Maintenance Tool Box.
Operation Manual.
 
  23
IDMA28940
MakeSumitomo,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Stroke:300 mm,
SPM:40,
Die height:1200 mm,
Bolster:1700 x 1050 mm,
Slide:1500 x 1000 mm,
Adjust:150 mm,
Main motor: 45 Kw,8p
 
  24
IDMA28736
MakeAIDA,Japan
ModelUL5000-1-200-95
YOM2008
ConditionGood Condition
PhotoSee Photo
Type: S Motion, 9 point support.
Capacity : 500 ton,
Stroke : 250 mm,
No-load SPM : 20-60,
Micro inching : about 10 spm,
Die height : 700 mm,
Slide Adjustment : 100 mm,
Slide Size : 2000 X 950 mm (LR x FB),
Bolster Size : 2000 X 1000 mm,
Bolster Thickness : 200 mm,
The maximum mold weight : 2500 kg,
Main motor power : AC200V, 50HZ,
Main Motor : INV55 (inverter control),
Air pressure : 0.5 MPa,
Height : 4360 mm,
Press weight : 85 tons.
 
  25
IDMA28735
MakeAIDA,Japan
Model
YOM1995
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton,
Electricity : 400V, 200V, 60HZ,
Stroke : 200 mm,
SPM : 25-45,
Micro inching : 3 SPM,
Die height : 700 mm,
Slide Adjustment : 50 mm,
Slide : 1200 mm x 1000 mm,
Bolster : 1200 mm x 1100 mm,
Bolster Thickness : 250 mm,
Maximum molding Weight : 1.5 ton,
Main motor : 90KW 5CR.
 
  26
IDMA28712
MakeNagano
ModelKJP400
YOM1993
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Stroke: 180 mm,
Stroke per min: 50,
Shut height: 403 mm,
Adjustment of slide: 20 mm,
Bed area: 550 x 650 mm,
Air press required: 4 5
Main motor: 37,
Adjusting motor: 0.75
 
  27
IDMA28526
MakeAIDA,Japan
ModelPK-VKs-250
YOM1975
ConditionGood Condition
PhotoSee Photo
Frame type : H
Press capacity : 250 ton,
Stroke length : 70 mm,
Stroke per minute : 70 S.P.M,
Slide area : 400 x 500 mm,
Slide adjustment : 15 mm,
Die height : 300 mm,
Material of frame : Steel,
Motor power : 20 kW,
Machine weight : 18 ton.
 
  28
IDMA28525
MakeKomatsu Maypress
ModelMKN2-300/8
YOM
ConditionGood Condition
PhotoSee Photo
Frame type : H
Press Capacity : 300 ton,
Stroke length : 88 mm,
Stroke per minute : 44 S.P.M,
Table size : 400 x 500 mm,
Slide adjustment : 50 mm,
Die height : 300 mm,
Material of frame : Steel,
Motor power : 5.5 kW,
Machine weight : 8 ton.
 
  29
IDMA28405
MakeAIDA,Japan
ModelK1-2500E
YOM2002
ConditionGood Condition
PhotoSee Photo
Capacity :250 ton,
Ram Stroke : 160 mm,
Bolster area : 600 x 500 mm,
Stroke per minute : 65 spm,
Die height : 400 mm,
Bed knockouts.
Photoelectric guard.
 
  30
IDMA27885
MakeEnomoto
Model100KJP-H
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 100 ton,
Stroke length : 70 mm,
Stroke per minute : 60 s.p.m,
Die height : 265 mm,
Slide adjustment : 15 mm,
Slide area : 320 x 300 mm,
Bolster area : 400 x 500 ,mm,
Spindle drive motor : 5.5 kW.
 
  31
IDMA27883
MakeEnomoto
Model230KJP-H
YOM1973
ConditionGood Condition
PhotoSee Photo
Capacity : 230 ton,
Stroke length : 110 mm,
Stroke per minute : 80 s.p.m,
Die height : 350 mm,
Slide adjustment : 25 mm,
Slide area : 39 x 370 mm,
Bolster area : 500 x 600 ,mm,
Spindle drive motor : 11 kW.
 
  32
IDMA27873
MakeAIDA,Japan
ModelPK-VK-250
YOM1963
ConditionGood working condition
PhotoSee Photo
Capacity: 250 ton,
Stroke length: 140 mm,
Stroke per minute: 50 SPM
Slide area: 300 x 400 mm,
Bolster area: 400 x 500 mm,
Slide adjustment: 15 mm,
Die height: 350 mm,
frame type: H,
Material of frame; Steel,
Motor power: 7,5 kW,
Dimensions (L x W x H): 1.7 x 1. x 3.0 m.
 
  33
IDMA27775
MakeKomatsu
ModelMKN600
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 600 tons,
Stroke : 160 mm,
SPM : 40,
Die Height : 520 mm,
Adjust : 50 mm
Bolster : 630 x 900 mm,
Slide : 5400 x 600 mm.
 
  34
IDMA27774
MakeKomatsu
ModelMKN800
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 800 tons,
Stroke : 180 mm,
SPM : 35,
Die Height : 600 mm,
Adjust : 60 mm
Bolster : 850 x 1000 mm,
Slide : 760 x 800 mm.
 
  35
IDMA27754
MakeBarnaul Russia
ModelKB0036
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity : 400 tons,
Ram stroke : 240 mm,
Stroke per minute : 32 SPM,
Shut height : 590 mm,
Stroke adjustment : 16 mm,
Bed dimensions : 1000 x 1000 mm,
Lower knockout stroke : 120 mm,
Capacity : 32 tons,
Upper knockout stroke : 10 mm,
Capacity : 16 ton,
Main motor drive : 40 kW,
Dimensions : 3030 x 1750 mm,
Height above floor level : 3870 mm,
Weight : 36,5 tons.
 
  36
IDMA27742
MakeAIDA,Japan
ModelPK-VK-160
YOM1966
ConditionGood Condition
PhotoSee Photo
Press capacity : 160 ton,
Stroke length : 100 mm,
Stroke per minute : 60 S.P.M,
Slide area : 300 x 350 mm,
Bolster area : 400 x 400 mm,
Slide adjustment : 12 mm,
Die height : 350 mm,
Frame type: H,
Motor power: 5.5 kW,
machine weight: 5 ton,
Dimensions (L x W x H): 1.7 x 1.4 x 2.9 mm
 
  37
IDMA27740
MakeKomatsu
ModelPK-40
YOM1975
ConditionGood Condition
PhotoSee Photo
Press capacity : 400 ton,
Stroke length : 140 mm,
Stroke per minute : 25 S.P.M,
Slide area : 370x500 mm,
Bolster area : 480x600 mm,
Slide adjustment : 15 mm,
Die height : 370 mm,
 
  38
IDMA27693
MakeAIDA,Japan
ModelRS58
YOM
ConditionVery good condition,Under power
PhotoSee Photo
Capacity : 160 ton,
Ram Stroke : 90 mm,
Stroke per minute : 65,
Shut height : 350 / 65 SPM,
Ram adjustment : 15 mm,
Ram size : 450 x 350 mm,
Table size : 500 x 400 mm,
Ejector upper capacity : 3 ton,
Ejector upper stroke : 25 mm,
Ejector lower capacity : 8 ton,
Ejector lower stroke : 10 mm.
 
  39
IDMA27628
MakeManyo,Japan
ModelLP300-200S
YOM
ConditionGood Condition
PhotoSee Photo
Pressing Capacity : 300 ton,
Stroke per minute : 60 s.p.m,
Stroke Length : 200 mm,
Ram Adjustment amount : 10 mm,
Shut Height : 520 mm,
Die Height : 400 mm,
Lamb under surface dimensions : 750 x 500 mm,
Table Dimensions : 1100 * 750 mm,
Knock-Out Capacity : 15 ton,
Driving main motor : 37KW-4P kw,
Refueling Motor : 1.5 kw,
Pneumatic requirement : 5~6 kg/cm2,
Dimensions H x W x D : 3800 * 2400 * 3300 mm,
Weight : 32 ton.
2 units available.
 
  40
IDMA27605
MakeBarnaul Russia
ModelK8240
YOM1990
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 tons,
Ram stroke : 300 mm,
Ram stroke to lower dead center at nominal force : 20 mm,
Number of ram stroks per minute : 25,
Shut height : 700 mm,
Bolster plate-to-ram adjustable stroke : 20 mm,
Bed dimensions : 1250 x 1250 mm,
Bolster plate thickness :-
Lower Knockout : 4 nos,
Stroke : 120 mm,
Force : 630 kN,
Upper Knockout : 4 nos,
Stroke : 50 mm,
Force : 160 kN,
Main drive motor power : 110 kW,
RPM of motor : 1500,
Distance between knockouts : 250,
Overall dimensions of the press :-
floor space : 3095 x 3900 mm,
height above floor level : 5900 mm,
Mass : 75 tons.
With automatic transfer mechanism.
Qty : 2 nos.
 
  41
IDMA27484
MakeKomatsu
ModelLIC250K2
YOM1984
ConditionGood Condition
PhotoSee Photo  |  See Video
Press capacity : 250 ton,
Stroke length : 140 mm,
Stroke per minute : 55 S.P.M,
Slide area : 600 x 400 mm,
Bolster area : 600 x 500 x 100 mm,
Slide adjustment : 40 mm,
Die height : 400 mm,
Frame type : H,
Material of frame : Steel,
Motor power : 22 kW,
Dimension (L x W x H) : 2.3 x 1.5 x 3.3 m,
Machine weight : 13.5 ton.
 
  42
IDMA27281
MakeYodogawa
ModelPKC250
YOM1973
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Standard Stroke Length : 120 mm,
Standard No. of Stroke : 50 spm,
Slide Adjustment : 15 mm,
Die Height : 370 mm,
Bolster Thickness : 100 mm,
Bolster Size (RL x FB) : 500 x 600 mm,
Slide Size (RL x FB) : 400 x 400 mm,
Main Drive Motor : 11kW x 6P.
 
  43
IDMA27280
MakeChin Fong,Taiwan
ModelKT400
YOM1984
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 180 mm,
Stroke per minute continuous : 25-40 spm and intermittent : 15 spm,
Die height : 605 mm,
Slide adjustment : 15 mm,
Bolster area (LR x FB) : 775 x 700 mm,
Slide area (LR x FB) : 765 x 700 mm,
Bolster thickness : 150 mm,
Side open (FB x H) : 500 x 500 mm,
Main motor : VS 50 HP x 4 P,
Adjusting motor of slide : 2 HP x 6 P,
Used air pressure : 5kg / cm2,
Working height : 1050 mm,
Height from floor : 5400 mm,
Power source : 3P 440V 60Hz,
Feed line from bolster : 310 mm,
Knock out device in bed :-
capacity : 10 x 3 = 30 ton,
stroke : 60 mm,
Pitch : 170 mm,
Feeder :-
Utani MFG, Model K60.
 
  44
IDMA27177
MakeWilkins & Mitchell
ModelO421-16TR
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 750 ton,
Stroke : 406 mm,
Stroke : 19 min-1,
Shut height max : 914 mm,
Table size left to right : 1066 mm,
Table size front to back : 1219 mm,
Ram left to right : 1117 mm,
Ram front to back : 1219 mm,
Ram adjustment : 152 mm,
 
  45
IDMA26028
MakeSumitomo,Japan
ModelKJP1000
YOM1972
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton,
Stroke : 140 mm,
Stroke per minute : 30
Die height : 750 mm,
Die Height Adjustment: 15mm
Bolster (RLxFB): 800x1000mm
Clutch Model: S-1202FK
Main Motor: 45kW x 6P
 
  46
IDMA25015
MakeAIDA,Japan
ModelPS30
YOM
Conditionexcellent working condition
PhotoSee Photo
Capacity 300 tons,
Nominal force at 13 mm to BDC
Ram stroke : 250 mm,
Stroke per min : 30…35 spm,
Shut height : 650 mm,
Adjustment : 125 mm,
Ram size FBxLR : 750 x 750 mm,
Table size FBxLR : 750 x 900 mm,
Bolster thickness : 150 mm,
Max die-weight carrying capacity on ram face : 3 t,
Power of main motor : 45 Kw,
Air consumption : 5 kg/cm2,
Upper ejector pneumatic system,
Force of upper ejector : 5 t,
Stroke of upper ejector : 70 mm,
Lower ejector : lever-cam system,
Force of lower ejector : 15 t,
Ejector stroke : 80 mm,
Mechanical feeding system,
Stroke : 200 mm,
Direction of movement LR,
Height of feed line : 370 mm.
 
  47
IDMA24776
MakeWilkins & Mitchell
ModelS1-750-42-48
YOM
ConditionGood Condition
PhotoSee Photo
Pressing power : 750 ton,
Stroke : 406 mm,
Stroke : 19 min-1,
Shut height max : 914 mm,
Table size (left to right ) : 1066 mm,
Table size (front to back)) : 1219 mm,
Ram (left to right) : 1117 mm,
Ram (front to back) : 1219 mm,
Ram adjustment : 152 mm.
 
  48
IDMI5318
MakeGrabener
Model
YOM1978
ConditionExcellent condition,under power
PhotoSee Photo
force : 400 tons,
no of stages: 4 station,
dwell period at bdc: 10 mm,
stroke length: 160 mm,
no. of strokes per minute: 50/100,
daylight: 600 mm,
distence between columns: 1020 mm,
length of table: 1000 mm,
breadth of table: 700 mm,
ejector (bottom) 4x 10tons (4 station): 40 tons,
ejector length (bottom): 50 mm,
ejector topside 4x$ tons: 16 tons,
ejector length topside: 40mm,
motor rating: 75 kw 1440 rpm,
machine weight: 36 tons.
Producing on this press Hexagon nuts, valve retainers, tappets, roller tappets etc. upto 200 grams
 
  49
IDMA17899
MakeSeyi,Taiwan
ModelSPF2-300-1
YOM2001
ConditionGood working condition
PhotoSee Photo
300 tons,
Tonnage rating point: 6.5mm,
Stroke per minute: 40-70 spm,
Stroke: 120mm,
Die height: 450mm,
Slide area: 1500 +/-3 x 720 +/- 3mm,
Bolster area: 1500 +/-3 x 920 +/- 3mm,
 
  50
IDMA11490
MakeSack & Kiesselbach
ModelUKP2000
YOM1986
ConditionGood Condition
PhotoSee Photo
2000 tons ,
top