Category : Forging Equipment

Sub-Category : Press Forging Open Die Hydraulic

Total Machines Found : 68

Select | Machine Details
 
  1
IDMA35007
MakeZdas
ModelCKV2650
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Press after modernization and repair on 2008-2009 year
Forming pressure:2650 Mp
Max. weight of billet smith forged upset:43/27 t
Output of press weight of forging per 1 hr:2500 kg
No. of strokes/length of strokes:
Standard: 10/165 min1/mm,
Planishing: 30-40/50 min1/mm,
Smoothing:80-100/10 min1/mm,
Number/maximum stroke of working plungers Z:3/1800 mm,
Return force; 285 Mp,
Width between stops on columns B x B1:2940 x 1140 mm,
Width between column C xD: 3600 x 1800 mm,
Max. daylight of press H: 3900 mm,
Dimension of clamping surface:2400 x 1600 mm,
Width of top crosshead: 1600 mm,
Travel of one sided longitudinal table: 3600 mm,
Travel of one sided longitudinal table (to both sides):3600 mm,
Travel of transverse table: 3000 mm,
Working pressure of fluid: 250 kp/cm2
Dimensions of press:
Height V/V1: 10462 mm,
Max. length of foundation 1/1: 26000/4200
Max. width of foundation J/J1:
Weight of press with equipment according to table fitted: 1-495000
Total output of electromotor of accumulator station: 2060 kW
 
  2
IDMA35004
MakeSMS
Model
YOMBuilt in : 1991 ( Control & HYD system : retrofitted by Oil gear in 2002)
ConditionGood Condition
PhotoSee Photo
Technical specification
- Nomal Pressure Force: 25 MN at 450 bar
- Pull Back Force : 3.5 MN at 320 bar
- Ram dia : 850 mm
- Operating Pressure : 450 bar
- Press Daylight : 3,000 mm
- Stroke : 1,300 mm
- Clear Width : 2,140 mm
- Clear Witdth Cross : 1,150 mm
- Overall Height : 9,600 mm
- Overall Depth : 2,030 mm
- Pull Back Speed : 250 mm / s
- Pressing Speed : Max. 110 mm / s
- Machine weight : 250,000 Kg
- Table Shifting Speed : 610 + 2,110 mm
- Die shifting Stroke : 3,240 mm
- Die Magzine Stroke : 2,260 mm
1-2) 30Ton - Manipulator
- Maker : DANGO (Germany)
- Built in : 2002.
- PLC system : CPU S7 – 400 (SIEMENS)
 Technical specification
- Load-Carrying Capacity : (Nominal) - 300 KN , (MAX) – 360 KN
- Load Moment : (Nominal) – 600 KN.M , (MAX) – 900 KN.M
- Moment of tilt : 1,283 KN.M
- Max Tongs Opening : 1,600 mm (For round) , 1,347 mm (For square)
- Min Tongs Opening : 310 mm
- Total Length : 10,010 mm (Tongs closed)
- Total Width : 4,040 mm
- Total Height : 4,567 mm
- Lowest Position of Tongs : 1,150 mm
- Tiling of Upward : 6.5
- Tilting of downward : 14
- Tilting Speed : 3 / S
- Rotation of Tongs Speed : 1/36 RPM
- Travelling Speed : 0~500 mm/s (1 Step)
- Travelling Speed : 0~1,000 mm/s (2 Step)
- Main Pump Motor : 2 x 152 KW
- Max Operation Pressure : 200 Bar
- Circulation Pressure : Approx . 21 Bar
- Standard & Special Part
1-3) Transfer Car & Turn Table
 Transfer Car
- Maker: DANGO (Germany)
- Model: FDT300
- Built in: 2002. 01. 01
Turn Table
- Maker: STEEL T.N.C
- Built in: 2015. 10. 25
 
  3
IDMA34924
MakeOK-Kwang
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 2000 ton,
4 Column 1 cylinder,
Hyd cylinder,
Main cylinder: 920 mmx lea
Return cylinder: 200 mm x 2 ea
HYD cylinder power & working pressure
F: 2000 ton, P: 300 Kgf/cm2
F: 100 ton, P: 160 Kgf/cm2
Cylinder speed
High speed: 250 mm/sec,
Pressing speed: 55 mm/sec
Return speed: 250 mm/sec
Fast Forxing frquency: 70/min
Main Hyd Pump & Elec: motor
PV- 270R(313/min) + PV - 270 L (313 /min) + 350 Kwx6p 3 set
PV-270 R (313l/min) + PV46 L (53/min) + 185 KwxGp 1 set
Center distance of column: 2400 x 1200 mm,
Diameter of column: 350 mm
4 ea,
moving cylinder
Cylinder bore: 160 mm
Rod dia:90 mm,
Tool slide cylinder
Cylinder Bore: 250 mm
 
  4
IDMA34775
MakeHydraulik - Duisburg,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) Hydraulic press
Manufacturer: DUISBURG, Germany
Model: 1500T
Force – 1500 t
Stroke – 1600 mm
Number of strokes per min. – 4
Distances between columns – 1800 and 1450 mm
Power – 300 Kw
Press dimensions (LxWxH) – 3650x2750x9055 mm
Press weight – 252 t

2) Manipulator MK10-66L
Year – 1971
Manufacturer - Plant of heavy forging and pressing equipment, Ryazan city, Russia.
Lifting capacity – 100 kN
Load moment – 250 kN
The largest diameter of the pincers turning circle – 1900 mm
Distance from the end of the jaws to the frame – 2245 mm
Clamp opening range – 1480 ... 200 mm
The smallest height of the trunk axis from the rail head, no more – 1225 mm
The greatest parallel rise of the trunk, no more – 700 mm
Angle of lateral rotation of the trunk around the vertical axis, degrees 360
Clamp rotation frequency, min-1 10.7
Manipulator movement speed, m / min 40
The speed of movement of the trunk in the vertical plane, m / min 1.9
Base – 4400 mm
Track width – 4000 mm
Manipulator dimensions:
- length 8435 mm;
- width 1950 mm;
- height from rail head 4225 mm.
Power – 30 kW
Weight – 45 t
 
  5
IDMA34392
MakeUralmash
Model
YOM1975
ConditionGood Condition
PhotoSee Photo
Number of stage:3
Force:
-3rd stage: 10000t
-2nd stage: 7000t
-1st stage: 3500t
Max. distance between table and traverse: 3500mm
Max. travel of traverse: 1600mm
Distance between column:
a)-along the axes from the front of press: 5400mm
-from the control panel: 4700mm
b)-in the light from the front of press: 4650mm
-from the control panel: 3950mm
Working speed of traverse: 30-50mm/sec
Moving up and down speed of traverse: 100-150mm/sec
Table: 4000x6500mm
Table travel speed: 200mm/sec
One side table travel: 7000mm
Force of central ejector:
-3rd stage: 1350t
-2nd stage: 850t
-1st stage: 350t
Force of side ejector: 280t
Stroke of central and side ejector: 600mm
Speed of central and side ejector: 100mm/sec
Min. dimension of stamps: 1000x1400mm
Min. stamps height: 1000mm
Force of working liquid ( water with emulsion): up to 320 kg/cm2
Press weight: 1607t
Total weight: 1833.5t
Max. weight of single press part (traverse): 127t
Dimensions: 31400x16600mm
Height above floor: 11000mm
Height under floor: 8130mm
Total power of motors: 10kW
 
  6
IDMA34208
MakeDemag
Model
YOM
ConditionGood Condition
PhotoSee Photo
1. DEMAG MEER hydraulic open die forging press with a force of 12000/15000 tons. (The weight of the press is about 4000 tons). Manufactured in Germany.
2. Forging manipulator demag mayer with a load capacity of 250 tons. (Weight 470 tons).
3. Tools and accessories for forging various parts.(Weight about 800 tons). Manufactured in Germany.
The press is connected to all systems. But for the sake of environmental safety, the working fluid was drained. With serious intentions to purchase everything, you can experience it in the work.
 
  7
IDMA34076
MakeSeonam (Korea)
Model
YOM2004
ConditionGood Condition
PhotoSee Photo
Power
Total : 2290tons
Main : 1230 tons
Pressure
Max. pressure :320 kg
Ram dia
Main : 700 mm
Aux : 460 mm
Stroke : 1500mm
Daylight :3400mm
Return cylinder : 240ton power
Max pressure 320kg
Dia:2-220mm
Stroke : 1500 mm
Speed
Approaching : 300mm sec
Forging total cylinder : 67mm/29sec
Return : 300mm/sec
Moving bolster
size : 2200mm x 6050mm
Stroke : 3000 mm
Speed : 0-300 mm/sec
Power : 65 tons
Cylinder dia : 2x1x200 mm
Max. pressure : 320kg
Column
Dia : 4-390 mm
Front distance : 3250mm
Side distance : 1650mm
Front inside distance : 2730mm
Side inside distance : 1180mm
Hydraulic unit
Main pump -1 :3set a7VO500LV
Total Qty. : 5 Set
Total volume : 2900L /1250min
Total motor : 185x5 kw
Accessory
Pop up tum table : 1 Set
Tool shift : 1set
Machine weight 250tons
 
  8
IDMA34038
MakeZdas
Model
YOM
ConditionGood Condition
PhotoSee Photo
Type 2 Column pull down
Open die forging press
3. Pressing capacity at 320bar: 1000Tons
4. Return capacity: 180Tons
5. Pressing speed: 80mm/sec
6. Return speed: 250mm/sec
7. Pressing stroke: 1000mm
8. Day light: 2250mm
9. Distance between column clear width: 1560mm Χ 1000mm
10. Moving Table Dimension: 1100mm Χ 2400mm
11. Total weight Approx.: 122Ton
Price: USD 600,000 CIF India

Technical Specifications of Zdas 8Ton/16MT
Rail bound Forging Manipulator
Maker ZDAS
Year of manufacture 1992, Retrofit 2012
1. Carrying force: 8 ton
2. Tilting moment: 160 kNm
Clamping diameter
1. Main jaws min. 300 mm
2. Main jaws max. 500 mm
3. Exchange jaws min. 120 mm
4. Exchange jaws max. 1200 mm
5. Tongs I(for forming parts) 3,8ton
6. Carrying force min. 0
7. Carrying force max. 1400 mm
8. Height of tongs axle above rails min. 900 mm
9. Height of tongs axle above rails max. 1500 mm
10. Vertical parallel displacement +/- 200 mm
11. Upward swinging 10 Grad
12. Central lubrication Lincoln
13. Tank content: 2m3
Price: USD 400,000 CIF India
 
  9
IDMA34036
MakeHBE Korean
Model
YOM
ConditionGood Condition
PhotoSee Photo
1. Scope of Supply
1-1. Included Supply Part
1-1-1) 25MN/30MN Two column push down open die forging press
1-1-2) Oil hydraulic control system complete
1-1-3) Electric and electronic control system complete
1-1-4) Hydraulic piping and fittings
1-1-5) Forging press foundation drawing and loading data
1-1-6) All documentation, drawing and manual
1-1-7) Moving table and cylinder
1-1-8) 3-Die shift device
1-1-9) Auto lubrication system
1-1-10) Top die auto clamping device
1-1-11) Forging press with manipulator integration
1-1-12) Anchor bolts for forging press
1-1-13)
1-1-14)
1-1-15)
1-1-16)
Export packing
Ethernet system
Warranty (one year from the date of acceptance)
Ladder and platform, hand guide
1-1-17) Dango 25Ton/60MT Rail bound manipulator
1-1-18) Traveling Rail Track
1-1-19) Ocean Freight
1-2. Exclusions from Scope of Supply and Services
1-2-1) All taxes and duties in India
1-2-2) Related matters to all environment permission in relation to environment, noise,
vibration and etc.
1-2-3) Civil works and operator cabin and related matters to a structure
1-2-4) Utilities (air, water, electricity)
1-2-5) Tooling (Die & Anvil)
1-2-6) Hydraulic oil & Flushing oil
1-2-7) Material for production trials
1-2-8) Installation of pit cover around Forging press and manipulator
1-2-9) Installation of forging press piping and wiring and manipulator
1-2-10)
1-2-11)
Cooling Tower and cooling water pump and piping
Lubrication grease
1-2-12) Nitrogen Gas
1-2-13) Traveling Rail Track Support Frame
Technical specification of 25MN/30MN Two Column
Push Down Open Die Forging Press- YOM: 2008, HBE. Retrofit: 2020
Nominal force static working pressure of 300 bar.
Forging force:25 MN (2500 tons)
Force static working pressure of 350 bar.Upsetting force:30 MN (3000 tons)
Maximum press stroke 2000 mm
Press daylight 4250 mm
Distance between column clear width (LΧR, FΧB) 1650 mm Χ 3000 mm
Number of pull back cylinder 2 (two)
Eccentric loading at 25 MN – in line of forging:
mm at right angle to line at forging
150 mm either side
300 mm press center
Forging tolerance measures on hot workpiece ±1 mm
10. Die table area (width Χ length Χstroke) 2300 mm Χ 4600 mm Χ ±2300mm
11. Die shift 3-position die shift
12.Press speeds
- Forging speed at 25 MN:80 mm/sec
- Upsetting speed at 30 MN:40mm/sec
- Advance speed :300 mm/sec
- Return speed:300 mm/sec
- Die table slide forward:300 mm/sec
Press forces
- Forging at 300 bar :25 MN (2500 tons)
- Upsetting at 350 bar:30 MN (3000 tons)
- Return at 300 bar:5.00 MN (500 tons)
- Table shift at 300 bar:1.50 MN (150 tons)
- Die shift at 300 bar:1.0 MN (100 tons)
- Top die clamping at 50 bar:0.07 MN (7 tons)
Hydraulic pumps:8 sets Χ Axial piston pump
Pressure rate 350 bar
Working pressure 300 bar
- Rexroth
- Total flow
4800 l/min (300bar)
4000 l/min (350bar)
Electric main motors:4 sets x 600 kw, 1200 rpm, 3300 volt,
Double end shaft
Total electric power supply
- 4 sets Χ main motors :600 kw, 3300 volt, 1200 rpm
- 1 set Χ pilot motor:15 kw, 380 volt, 1200 rpm
- 1 set Χ cooling and filtering motor:56.25 kw, 380 volt, 1200 rpm
- Total power supply : 3146.25 kw
- 3300 volt : 2400 kw
- 440 volt : 71.25 kw
Overall dimension of press
- Height:14,500 mm
- Press above floor level:11,200 mm
- Depth:3,300 mm
Weight of press Approx. 550 tons
Technical Specifications of Parameter of 25Ton/50MT
Rail Bound Manipulator.- YOM: 1983 Retrofit: 2018
Carrying capacity, nominal 200 kN
Tongs openings, without inserts, round:400/1,100 mm round
- with inserts :160-300 mm round
Max. turning circle of opening tongs 1,950 mm
Min. tongs centre height above rails 1,000 mm
Max. tongs centre height above rails 1,850 mm
Vertical stroke of tongs parallel to floor 850 mm
Vertical tilting angle of tongs 10° 6.5° down , up
Horizontal side shift of tongs ± 200 mm
Horizontal movements of tongs in forging direction,
relative to carriage± 58 mm
Centre rail distance 3,200 mm
Overall dimensions:
- width, approx. 4,278 mm
- height, approx. 3,755 mm
- length, approx. 8,961 mm
Speed, times:
- forging 0-30 m/min
- traveling 0-50 m/min
- turning of tongs 0-30 RPM
- lifting and lowering of tongs, compl. Stroke 170 mm/sec
- tilting of tongs, compl. Stroke 170 mm/sec
- side shifting of tong, compl. Stroke 170 mm/sec
- clamping of tongs, compl. Stroke 170 mm/sec
Accuracy:
- traveling ±3 mm
- Rotating ±1°
Total electrical capacity installed, approx. 273 kW
Total delivery of the main pumps 750 L/min
Total capacity of accumulator 150 l
Usable capacity of accumulator 50 l
Cooling capacity, with max. water inlet tem. 36℃,min.:100 kW
Travel distance unfixed m
Weight on rails approx. Mechanic + Hydraulic 180 t

1. 25MN/30MN Two column push down open die forging press

2. Dango 25Ton/50MT rail bound manipulator
Retrofit, Upgrade of Manipulator
- YOM: 1976, Retrofit: 2020
- New electric system: Siemens S7
- New hydraulic system: Pump, manifold, filters, sensors
- New traveling chain and rail track

OPTION
3. Supervising of Installation, Commissioning/Training 6-8weeks US$
 
  10
IDMA34035
MakeHBE Korean
Model
YOM
ConditionGood Condition
PhotoSee Photo
1. 30MN/35MN Four column push down open die forging press
YOM: 2010, HBE PRESS. Refurbished in 2020
2. Dango 25Ton/50MT rail bound manipulator
Retrofit, Upgrade of Manipulator
- YOM: 1976, Retrofit: 2020
- New electric system: Siemens S7
- New hydraulic system: Pump, manifold, filters, sensors
- New traveling chain and rail track
1. Scope of Supply
1-1. Included Supply Part
1-1-1) 30MN/35MN Four column push down open die forging press
1-1-2) Oil hydraulic control system complete
1-1-3) Electric and electronic control system complete
1-1-4) Hydraulic piping and fittings
1-1-5) Forging press foundation drawing and loading data
1-1-6) All documentation, drawing and manual
1-1-7) Moving table and cylinder
1-1-8) 3-Die shift device
1-1-9) Auto lubrication system
1-1-10) Top die auto clamping device
1-1-11) Forging press with manipulator integration
1-1-12) Anchor bolts for forging press
1-1-13) Export packing
1-1-14) Ethernet system
1-1-15) Warranty (one year from the date of acceptance)
1-1-16) Ladder and platform, hand guide
1-1-17) Dango 25Ton/50MT Rail bound manipulator
1-1-18) Traveling Rail Track
1-2. Exclusions from Scope of Supply and Services
1-2-1) All taxes and duties
1-2-2) Related matters to all environment permission in relation to environment, noise,vibration and etc.
1-2-3) Civil works and operator cabin and related matters to a structure
1-2-4) Utilities (air, water, electricity)
1-2-5) Tooling (Die & Anvil)
1-2-6) Hydraulic oil & Flushing oil
1-2-7) Material for production trials
1-2-8) Installation of pit cover around Forging press and manipulator
1-2-9) Installation of forging press piping and wiring and manipulator
1-2-10) Cooling Tower and cooling water pump a
1-2-11) Lubrication grease
1-2-12) Nitrogen Gas
1-2-13) Traveling Rail Track Support Frame

Nominal forging, cogging force (static working pressure of 320 bar):30MN(3000tons)
Upsetting force (static working pressure of 350 bar):35 MN (3500 tons)
Maximum press stroke: 2000 mm
Press daylight: 3000 mm
Distance between columns (Inside width):3000mm Χ 1460 mm
Number of pull back cylinders: 2
Forging tolerance measures on hot work piece: ±1 mm
Die Table area (width Χ length Χstroke): 2000 mm Χ 4000 mm Χ 3000mm
Press speeds
- Forging speed at 30 MN: 1-70 mm/sec
- Upsetting speed at 35 MN: 1-35 mm/sec
- Advance speed. Fast/slow:1-300 mm/sec / 10mm/sec
- Return speed. Fast/slow: 1-300 mm/sec / 10mm/sec
- Die table slide forward.Fast/slow: 1-250 mm/sec / 5mm/sec
Press forces
- Forging at 320 bar: 30 MN (3000 tons)
- Upsetting at 350 bar: 35 MN (3500 tons)
- Return at 320 bar: 3.0 MN (300 tons)
- Table shift at 250 bar: 0.94 MN (94 tons)
Hydraulic pumps: 8 sets Χ Axial piston pump, Oilgear
Pressure rate 400bar
Working pressure 350bar
Electric motors
- 4 sets Χ main motors: 500kw, 3300volt,1200rpm.
double end shaft
- 2 sets Χ boost motor :90kw, 440volt,1800rpm
- 1 set Χ pilot pump: 60kw, 440volt,1800rpm
- 1set Χ cooling and filtering motor :150kw, 440volt, 3600rpm
- 1set Χ Auxiliary motor :90kw, 440volt, 1800rpm
PLC control system and HMI PLC Allen-Bradley

Technical Specifications of Parameter of 25Ton/50MT
Rail Bound Manipulator.- YOM: 1983 Retrofit: 2020
Carrying capacity, nominal: 200 kN
2. Tongs openings, without inserts, round
- with inserts:400/1,100 mm round
160-300 mm round
3. Max. turning circle of opening tongs: 1,950 mm
4. Min. tongs centre height above rails: 1,000 mm
5. Max. tongs centre height above rails: 1,850 mm
6. Vertical stroke of tongs parallel to floor: 850 mm
7. Vertical tilting angle of tongs: 10° 6.5° down , up
8. Horizontal side shift of tongs: ± 200 mm
9. Horizontal movements of tongs in forging direction,relative to carriage: ± 58 mm
10.Centre rail distance: 3,200 mm
11. Overall dimensions:
- width, approx. 4,278 mm
- height, approx. 3,755 mm
- length, approx. 8,961 mm
12. Speed, times:
- forging 0-30 m/min
- traveling 0-50 m/min
- turning of tongs 0-30 RPM
- lifting and lowering of tongs, compl. Stroke 170 mm/sec
- tilting of tongs, compl. Stroke 170 mm/sec
- side shifting of tong, compl. Stroke 170 mm/sec
- clamping of tongs, compl. Stroke 170 mm/sec
13.Accuracy:
- traveling ±3 mm
- Rotating ±1°
14. Total electrical capacity installed, approx. 273 kW
15. Total delivery of the main pumps 750 L/min
16. Total capacity of accumulator 150 l
17. Usable capacity of accumulator 50 l
18. Cooling capacity, with max. water inlet tem. 36℃, min.:100 kW
19. Travel distance unfixed m
20. Weight on rails approx. Mechanic + Hydraulic 180 t

1. 30MN/35MN Four column push down open die forging press
YOM: 2010, HBE PRESS. Refurbished in 2020

2. Dango 25Ton/50MT rail bound manipulator
Retrofit, Upgrade of Manipulator
- YOM: 1976, Retrofit: 2020
- New electric system: Siemens S7
- New hydraulic system: Pump, manifold, filters, sensors
- New traveling chain and rail track

OPTION:
3. Supervising of Installation, Commissioning/Training 4-6weeks US$
 
  11
IDMA34034
Make
Model
YOM2009
ConditionGood Condition
PhotoSee Photo
1 Forging force:30MN(3000tons)
2 Press stroke: 2500 mm
3 Press daylight: 3500 mm
4 Distance between columns (Inside width): 3000mm Χ 1460mm
5 Number of pull back cylinders: 2
6 Die Table area (width Χ length Χstroke): 2000 mm Χ 4000 mm Χ 3000mm
7 Press speeds
- Forging speed:40 mm/sec-
-Advance speed: 250 mm/sec
- Return speed:250 mm/sec
- Die table slide forward:250 mm/sec
8 Press forces:
- Pressing:30 MN (3000 tons)
- Return:3.0 MN (300 tons)
- Table shift at 250 bar:0.94 MN (94 tons)
9 Hydraulic pumps: 4 sets Χ Axial piston pump, Rexroth
Pressure rate 400bar
Working pressure 320bar
10 Electric motors
- 4 sets Χ main motors:250kw, 440volt, 1200 rpm
- 1 set Χ pilot pump: 22kw, 440volt,1200 rpm
- 1set Χ cooling and filtering motor 15kw, 440volt, 1200rpm
11 PLC control system: Mitsubishi

1. Scope of Supply
1-1. Included Supply Part
1-1-1) 3000Ton Four column push down open die forging press
1-1-2) Oil hydraulic control system complete
1-1-3) Electric and electronic control system complete
1-1-4) Hydraulic piping and fittings
1-1-5) Forging press foundation drawing and loading data
1-1-6) All documentation, drawing and manual
1-1-7) Moving table and cylinder
1-1-8) Auto lubrication system
1-1-9) Top die auto clamping device
1-1-10) Export packing
1-1-11) Warranty (one year from the date of acceptance)
1-1-12) Ladder and platform, hand guide
1-1-13) Ocean Freight
1-2. Exclusions from Scope of Supply and Services
1-2-1) All taxes and duties in India
1-2-2) Related matters to all environment permission in relation to environment, noise, vibration and etc.
1-2-3) Civil works and operator cabin and related matters to a structure
1-2-4) Utilities (air, water, electricity)
1-2-5) Tooling (Die & Anvil)
1-2-6) Hydraulic oil & Flushing oil
1-2-7) Material for production trials
1-2-8) Installation of pit cover around Forging press
1-2-9) Installation of forging press piping and wiring
1-2-10) Cooling Tower and cooling water pump and piping
1-2-11)Lubrication grease
1-2-12) Nitrogen Gas

1. 3000Ton four column push down open die forging press
- Fully refurbished
OPTION
2. Supervising of Installation, Commissioning/Training
- (1) Mechanical
- (1) Hydraulic
- (1) Programmer
- Round trip airline ticket, accommodation, meals are not
included.
 
  12
IDMA33921
MakeZdas
Model
YOMoverhauled in 2004
ConditionGood Condition
PhotoSee Photo
Capacity: 1600 ton,
Day Ligh: 2,800 mm
Distance Between Columns :3,500 mm
Stroke:2,000 mm
Moving Table:3,200 x 1,400 mm
Speed:200 mm/sec
Weight:250 Ton
Dango & Dienenthal Manipulator: 13 Ton
 
  13
IDMA33738
Make-
Model
YOM
ConditionGood Condition
PhotoSee Photo
Specification of 1000 ton Open die forging Press:
Manufacturing: Kisco Korea,
YOM:2005
Type: 4 column push down open die forging press
Pressing capacity at 320 bar: 1000 ton,
Upsetting capacity at 350 bar: 1100 tons,
Return capacity: 100 tons,
Pressing speed: 60 mm/sec,
Return speed: 250 mm/sec,
Pressing stroke: 1200 mm,
Daylight: 2000 mm,
Distance between column clear width: 1500 x 1000 mm,
Moving table dimensions: 1300 x 2000 x 2000 mm
main hydraulic pump: 2 sets x axial piston pump, 500 L/min,
Main electric motor: 2 sets x 262.5 kW, 3.3 KV, 1200 rpm,
main tank: 6000 liters,
Prefill tank: 1000 liters,
PLC control system: siemens S7-400, HMI
Price: USD 560,000 CIF India
Specification of Dango 10 ton rail bound manipulator
Make: Dango
Year 1993, Retrofit 2005
carrying force: 10 ton,
Tilting moment: 200 kNm,
Main jaws: min 100 mm,
Main jaws: max 500 mm
Height of tongs axle above rails: min 800 mm,
Height of tongs axle above rails: max.1500 mm,
Vertical parallel displacement: +/- 200 mm,
Central lubrication: Lincoln,
Tank capacity: 2000 liters,
Rail gauge: 2000 mm,
Travel length: 15 M,
Travelling speed: 0-30 m/Min
jaw rotating: 0-12 rpm,
PLC control system: Siemens S-7 300, HMI
Hydraulic pump: 2 sets x 2000 L/min, Rexroth
Electric motor: 2 sets x 65 kW, 440 V, 1200 rpm.
Price: USD 300,000 CIF India

Note: Reconditioning of Press USD 230,000 FOB Korea
payment: 100% L/C 10% down payment, balance against B/L under L/c
pre-inspection before dispatch with fully refurbishment and upgrading will be done at HBE-works in Korea
 
  14
IDMA33731
MakeDnepropetrovsk,Russia
ModelD2240
YOM1974
ConditionGood Condition
PhotoSee Photo
Rated force, kN 10000
Slider stroke, mm 1000
Distance between table and slide, mm 2250
Distance between table and slide, mm 2250
Main motor power kW 36
Table size width / length mm 1250/1500
Machine dimensions Length Width Height (mm) 6400_5225_6300
Weight kg 75000
 
  15
IDMA33717
MakeMorane Somua
Model
YOM1975/76
ConditionGood Condition
PhotoSee Photo
Press capacity- 1600 tons, Stroke- 775 mm, Daylight- 975 mm, Driving power- 900 Kw, Dimensions- 5200 x 2500 x 2500 mm ( B x T x H) ( W x D x H) ( L x P x H), Total weight- 100 t, Mode of operation- Oil hydraulic, Working pressure- 300 bar
 
  16
IDMA33535
MakeDemag
Model
YOM
ConditionGood Condition
PhotoSee Photo
Pressure Force : 1500ton
Stroke : 1000mm
Daylight : 2500mm
Distance between the column (left to right) : 2100mm
Table size (left to right) : 2500mm
Table Size (front to back) : 1200mm
Force of table adjustment : 20 t
Speed of table displacement : 27-340 mm/sec
Stroke of table adjustment : 500-1500mm
Approach Speed : 380mm/sec
Pressure speed : 74mm/sec
Return speed : 440mm/sec
Drive power : 2x270 kW
Electrics : 3000V
Mode of operation : Oil-hydraulic
Comment : Mechanically overhauled in 1998
 
  17
IDMA32965
MakeRussian
Model
YOM
ConditionGood Condition
PhotoSee Photo
1. Press Type: Four column push down Oil hydraulic system
2. Nominal force (static working pressure of 320 bar):1,500 Tons
3. Daylight: 2,250 mm
4.Stroke of Movable cross head:1,500 mm
5. Max Working Pressure:300 Kg/cm2
6. Cylinder Ram dia:1 set - ¢800 mm
7. Return cylinder Ram dia: 2 sets - ¢135 mm
8. Moving table Size:Width 2,000ΧLength 4,000 mm
9. Moving table Stroke:2,000 mm
10. Overall dimension:Height above of floor level 9,450 mm Depth 2,540 mm
11. Moving table Speed:50~300 mm/sec
12. Moving table power:60 tons
13. Moving table Cylinder dia:1 x 2 sets - ¢160 mm
14. Return power:85 tons
15. Return Stroke:1,500 mm
16. Approaching speed:300 mm/sec
17. Forging speed (~150 Kg/cm2:56 mm/sec
18. Forging speed (150~300 Kg/cm2):56~20 mm/sec
19. Return speed:300 mm/sec
20. Hydraulic Main pump:3 sets Rexroth Plunger Pump A7VO500LRD
21. Electric Main Motor:3sets 160Kw 440V – 480 Kw
22. Main Tank volume:15,000 Litter
23. Aux Tank volume:3,000 Litter
24. Total volume:1,740 L/min
25. Column Type:Straight side frame type
26. Column Material: SS400
27. Column Front Distance:2,400 mm
28. Column Side Distance:2,000 mm
29. Column Front Inside Distance:2,400 mm
30. Column Side Inside Distance:1,000 mm
31. Attachment Equipment:
1) Tool shifting device:Stroke 4,000 mm
2) Top die clamping device: 20 ton
3) Die magazine device: Stroke 3,300 mm
32. JIG:
1) 50Ф, 100Ф, , 150Ф, 200Ф, 250Ф,
300Ф, 350Ф, 400Ф
 
  18
IDMA32753
MakeRussian
ModelP236
YOM1981
ConditionGood Condition
PhotoSee Photo
Nominal effort clamping beams kN:
I step: 5000
II step: 10000
III step: 16000
Nominal effort clamping beams, kN
I step: 5000
II step: 10000
Nominal press force in this simple action: 26000 kN,
Nominal force of return stroke cylinders: 3200 kN,
The exhaust stroke of the traverse: 1400 mm,
Stroke of clamping beam: 1400 mm,
The greatest distance between the table and the exhaust beam: 2500 mm,
Table dimensions, mm:
Left- right: 3550
Front - back : 3550
Distance in light between the limiters, mm
left right: 2130
front back: 3730
Nominal force of movement of the table: 630 kN,
Table stroke: 3550 mm,
Nominal force of hydraulic booster (central ejector): 5000 kN,
Stroke of the hydraulic cushion (central ejector) above the table: 900 mm,
Nominal force of side pusher: 630 kN,
Stroke of side ejector above the table: 900 mm,
Maximum permissible eccentricity of load application, mm:
Simple action: 125
Double action: 200
Maximum permissible load per pin, kN: 400
Speed of movable traverse under double action, mm/s
Idling: 200
Stroke: 14,6
Return stroke: 125
Table movement speed, mm/s: 425
Speed of hydarulic booster (central ejector), mm/s: 72,5
Up: 212
Down: 200
Lateral ejector speed, mm/s:
UP: 212
Down: 295
Working fluid pressure, MPa: 20
Total capacity of main pumps, 1/min: 1320
Press dimensions, mm
Length: 18750
Width: 10560
Height: 14100
Height above floor level, mm: 8500
Weight: 594,4
Weight with foundation , t: 600,7
Hydraulic system capacity m,: 12
Water consumption for oil cooling m3/h: 4-8
 
  19
IDMA32568
MakeJSW,Japan
Model
YOMNew in 2011
ConditionGood Condition
PhotoSee Photo
Press Type: Four column push down oil hydraulic system.
Nominal force (static working pressure of 320 bar): 1500 ton,
Daylight: 3000 mm,Stroke of movable cross head: 1500 mm,
Max working pressure: 320 Kg/cm2Cylinder ram dia: 1 set - ’900 mmReturn cylinder ram dia: 2 sets - ’180 mm
Moving table size: width 2000 x length 5000 mm,
Moving table stroke: 2500 mm,
Overall dimensions: Height above of floor level 10,500 mm depth 2500 mm,
Moving table speed: 50~300 mm/sec
,Moving table power: 100 tons,
Moving table cylinder dia: 1x 2 sets - ’200 mm
Return power: 160 tons,Return stroke: 1500 mm,
Approaching speed: 300 mm/sec,
Forging speed (~200 Kg/cm2): 76 mm/sec,
Forging speed (150 ~ 320 Kg/cm2): 76~38 mm/sec,
Return speed: 350 mm/sec
,Hydraulic main pump: 5 sets rexroth plunger pump A7VO500LRD,Electric main motor: 5 sets 185 Kw 440 V-925 Kw,
main tank volume: 20,000 litter,
Aux tank volume: 500 litter,
Total volume: 2900 L/min,
Column type: Straight side frame type,
Column front distance: 2800 mm,
Column material: SS400Column side distance: 2400 mm,Column front inside distance: 2800 mm,Column side inside distance: 1250 mm
Attachment equipment:Tool shifting device: stroke 4000 mm,
Top die clamping device: 20 ton,
Top anvil rotating device: turning speed 5 rpm,
Table rotating device: Lifting capa 20 tons,
 
  20
IDMA32546
MakeDnepropetrovsk,Russia
ModelD2240
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 ton,
Table size: 1250 x 1500 mm,
Rm stoke: 1000 mm,
Ram speed: 60 mm/s
Distance between table and ram: 2250 mm,
Main motor power: 36 kW,
Press dimensions: 6400 x 5225 x 6300 mm,
Press weight: 75000 kg
 
  21
IDMA32512
MakeRussian
ModelDB2240
YOM1978
ConditionGood Condition
PhotoSee Photo
Nominal force, kN 10,000
Slider stroke, mm 1000
The distance between the table and the slider, 1800 mm
The distance between the table and the slider, 1800 mm
Engine power of the main movement of kW 40
Table size width / length mm 1250/1500
Machine dimensions Long Width Height (mm) 6400_5030_9350
Weight kg 69000
 
  22
IDMA32465
MakeSchloemann
Model
YOM
ConditionGood Condition
PhotoSee Photo
a. Main ram Force = 1584 Ton@ 3500 psi
b. Max Daylight Slide to Slide = 69.5 Inch
c. Main ram Stroke = 31.5 Inch
d. Main ram Push Back Force = 141 Ton@3500 psi
e. Knockout Force = 197 tons @3500 psi
f. Knockout Retract force = 60 Tons @ 3500 Psi
g. Knockout Stroke = 24 inch
h. Upper slide Stroke = 40 Inch
i. Lower slide Stroke = 40 Inch
j. Full height to Bottom = approx. 25 ft
Components for sale – Complete Press (Mechanical Components and Hydraulic Valves in as is condition)
Last operational before shutting down – March 2017
 
  23
IDMA32464
MakeBWW
Model
YOM
ConditionGood Condition
PhotoSee Photo
a. Main ram Force = 1000 Ton@ 2000 psi
b. Max Daylight = 84.5 Inch
c. Main ram Stroke = 39 Inch
d. Main ram Push Back Force = 131 Ton@2000 psi
e. Press Window = 56” X 39”
f. Full height to Bottom = approx. 20 ft
Components for sale – Complete Press (Mechanical Components and Hydraulic Valves in as is condition)
Last operational before shutting down – March 2017

OWNER REQUESTED FOR PRICE ON S IS EX-WORKS BASIS.
 
  24
IDMA32317
MakeDnepropress
ModelP152
YOMThe press is 1972/The manipulator is 1966
ConditionGood working condition
PhotoSee Photo  |  See Video
Nominal force 0,8 MN
Pressure of working liquid 32MPa
Max. stroke of movable head 1000mm
Max. distance between table and movable head 2000mm
Distance between columns 1500mm
Size of movable table 1200x2400mm
Table stroke in each direction 1600mm
Ejector nominal force 40t
Ejector stroke over table 200mm
Stroke frequency at stroke and force values given below, min-1:
-at 75% of rated force and 160-mm stroke 18
-at 25% of rated force and 40-mm stroke 50
Weight 138t
RAILBOUND MANIPULATOR MK5
Carrying capacity 50kN
Tilting moment 120kNm
Clamping diameter max. 120mm
Mass 120t
 
  25
IDMA32245
MakeRussian
ModelPA1343
YOMPress release in 1976/In 2010 the press was repaired
ConditionGood Condition
PhotoSee Photo  |  See Video
The nominal force of the press on the steps:
- first-stage – 500 T;
- second stage – 1400 T;
- third stage – 2000 T.
Permissible eccentricity – 160 mm.
The greatest stroke of the movable traverse – 1600 mm.
The distance between the table and the movable traverse in its upper position – 3150 mm.
The distance between the stroke of the limiter across the axis of forging – 2240 mm.
The distance between the stroke limiter along the axis of the forging – 1120 mm.
Sliding table size:
- Width – 1600 mm;
- Length – 4000 mm.
Table travel: 1600 mm on each side.
Table speed: 50-300 mm/sec
The force of the ejector – 100 T.
Ejector stroke over Desk – 560 mm.
Working fluid-water emulsion.
The pressure of the working fluid – 320 kgs/sm2.
Pump productivity: 2250 L/min
Dimensions:
- Width – 12470 mm;
- Length – 17840 mm;
- Height – 13740 mm;
- Height above floor – 8900 mm.
Press weight: 440 ton.

2) Manipulator: MK 10
Payload capacity: 10 ton,
The maximum load moment (the product of the weight of the work piece at a distance from the center of gravity to the center of the jaws): 25 mm,
Diameter disclosure without ear mites:
Max: 800 mm,
Min: 480 mm,
The smallest diameter of opening of ticks with inserts: 220 mm,
Width of cart rings: 4000 mm,
Trolley base: 4400 mm,
The radius of the turn ticks: 5085 mm,
The distance from the axis of the trunk in a horizontal position to the rail:
Max: 1925 mm,
Min: 1225 mm,
Distance of ticks from the rail int he inclined position of the trunk:
Max: 240 mm,
Min: 700 mm,
The value of parallel movement of the trunk in the vertical plane: 700 mm
The swing angle of the trunk relative to the horizontal axis in degrees:
-up: 11°30ʹ;
- down – 11°
The speed of rotation of the trunk around the axis – 10, 7 rpm
The speed of the lift trunk in the front suspension of 1.9 meters per minute
The speed of the lift trunk in the rear suspension of 3.0 meters per minute
The rotation speed of the upper frame of the truck: 3.68 rpm
Working fluid pressure:
- clamping mechanism – 80 kgf/cm²;
- lifting mechanism – 80 kgf/cm²;
- leveling mechanism – 50 kgf/cm²
The greatest pressure of the running wheel on the rail : 29800 kgf
Total power of electric motors: 122.6 kW
Size:
- length – 8435 mm;
- width – 4950 mm;
- height - 4225
Weight of the manipulator without electrical equipment : 87700 kg
The weight of the manipulator with electrical equipment : 90000 kg

3) 2 Manipulators available 5 and 10 ton
 
  26
IDMA32227
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1000/1200 ton
Ram 23.5” diameter
Strike 48”
Daylight 84”
Between columns 66”ground floor height 22’
Below ground 53”
Oilgear modern hydraulic system consisting of 2 650 hp main drive and pumps . Titian system 1500 hp. High speed planing. Allen Bradley control panel with touch screen and self diagnostic computer.
 
  27
IDMA32226
MakeLowry
Model
YOM
ConditionGood Condition
PhotoSee Photo
35” diameter ram
48” stroke
108” daylight
68” between columns
Height above ground 27’
72” below ground
Press disassembled and ready to ship
 
  28
IDMA32171
MakeHBE Korean
Model
YOM
ConditionGood Condition
PhotoSee Photo
Scope of Supply
1-1. Included Supply Part
1-1-1) 25 MN/30 MN Two column push down open die forging press
1-1-2) Oil hydraulic control system complete
1-1-3) Electric and electronic control system complete
1-1-4) Hydraulic piping and fittings
1-1-5) Forging press foundation drawing and loading data
1-1-6) All documentation, drawing and manual (1 x hard copy,1 x CD Rom)
1-1-7) Moving table and cylinder
1-1-8) 3-Die shift device
1-1-9) Auto lubrication system
1-1-10) Top die auto clamping device
1-1-11) Second hand rotating table (Dia 1700 mm)
1-1-12) Second hand forging tool (1 x top die, holder, 1 x bottom die, h
older)
1-1-13) Export packing
1-1-14) Ethernet system
1-1-15) Ladder and platform, hand guide
1-1-16) Supervising of Commissioning,Training,Erection
1-1-17) Retrofit and upgrade
- Installation of new 1 set of variable main pump
- Installation of new 1 set of fixed main pump
- Repair 6 sets of main pump and change the related parts
- Dismantling, repairing and testing of manifold block
- Repairing and grinding main ram surface
- Main packing and all cylinder packing, changing seal and adaptor
- Repairing moving slide bush
- Retrofitting prefill valve
- Keep the forging speed at 80 mm/sec with rewinding the main motor
coil (20% of rpm is reduced upon 60cycle-50cycle)
- Check and upgrade PLC control program
- Calibration of SSI sensor (moving slide, moving table)
- Change all control cable
- Cleaning the press
- New painting
- Complete retrofit of bolt, nut, fitting, lubrication, etc.
1-2. Exclusions from Scope of Supply and Services
1-2-1) All taxes and duties in India
1-2-2) Related matters to all environment permission in relation to
environment, noise, vibration and etc.
1-2-3) Civil works and operator cabin and related matters to a structure
1-2-4) Utilities (air, water, electricity)
1-2-5) Tooling (Die & Anvil)
1-2-6) Hydraulic oil & Flushing oil
1-2-7) Material for production trials
1-2-8) Installation of pit cover around Forging press
1-2-9) Installation of forging press piping and wiring
1-2-10) Cooling Tower and cooling water pump and piping
1-2-11) Lubrication grease
1-2-12) Nitrogen Gas
2.
1. Nominal cogging, Forging force,Static working pressure 300 bar: 25 MN (2500 tons)
2. Upsetting pressure of 350 bar :30 MN(3000 tons)
3. Maximum press stroke: 2000 mm
4. Press daylight: 4250 mm
5. Distance between columns (clear width): 1650 mm Χ 3000 mm
6. Number of pull back cylinders: 2
7. Eccentric loading at 25MN - in line of forging :at right angle to line at forging : 150 mm either side
300 mm press center
8. Die table area (width Χ lengthΧstroke): 2300 mm Χ 4600 mm Χ 2300 mm
9. Die shift: 3 Position die shift
10. Press speeds
- Forging speed at 25 MN: 80 mm/sec
- Upsetting speed at 30 MN: 40 mm/sec
- Advance speed. Fast: 300 mm/sec / 10 mm/sec,
- Return speed. Fast: 300 mm/sec / 10 mm/ sec
- Die table slide forward. Fast/slow: 300 mm/sec / 5 mm/sec,
Press forces
- Forging at 300 bar: 25 MN (2500 tons),
- Upsetting at 350 bar: 30 MN (3000 tons)
- Return at 300 bar: 3.0 MN (300 tons)
- Table shift at 300 bar: 1.20 MN (120 tons)
- Die shift at 300 bar: 0.8 MN (80 tons)
- Top die clamping at 50 bar: 0.07 MN (7 tons)
12. Number of press stroke
Press stroke Penetration Return stroke Stroke per minute
1 cylinder 150 mm 300 mm 10/12
1 cylinder 100 mm 200 mm 15/17
1 cylinder 50 mm 100 mm 30/34
1 cylinder 5 mm 20 mm 90/105
13. Hydraulic main pumps: 8 sets Χ Axial piston pump
Pressure rate 400bar, Variable(1), Fixed(7)
Working pressure 350bar
-Rexroth
-Total flow
4800 l/min (300bar)
14. Electric main motors: 4 sets Χ 600 kw, 3300 volt ,1200 rpm
Double end shaft, Rexroth
15. Total electric power supply
- 4 sets Χ main motor: 2400 kw 3300 volt 1200 rpm
- 1 set Χ pilot motor: 55 kw 440 volt 1200 rpm
- 1 set Χ cooling and filtering motor : 55 kw 440 volt 1750 rpm
18. Overall dimension of press
- Total height: 14,500 mm
- Press height above floor level: 11,200 mm
- Depth: 3,300 mm
19. Weight of press
Approx. 550 tons

3. Utilities
3.1 Electric power
Table for the motor for oil hydraulic direct drive system
Description Qty. Capacity kW (total) Speed rpm Voltage V/Hz Starter
Main pump motor 4 600 (2400) 1000 3.3 kV/50 Star Delta
Pilot pump motor 1 55 1450 415 V/50 Direct
Filter/cooling pump motor 1 55 1450 415 V/50 Direct
Lube pump 1 0.75 1450 415/V/50 Direct

Note: 50 cycle of motor cycle, rpm is the data after modernization.
Energy requirements and consumption of the oil drive
Electrical energy for the press
: installed capacity: 2,510 kW
Consumption peak: 2,500 kW
Average value: 500 kW
- Electric power for 25MN/30MN press. Approx 2,500 kW
3.2. Cooler water
Consumption at the inlet temp. 32-36°C for the press (approx.): 0 . 9 5 m 3/min(950L/min),
2 bar
Cooling capacity
Capacity of cooling tower 860,000 kcal/hr
3.3. Working oil
Specification for the oil for the hydraulic system
equivalent to DIN HLP 46 specification
- Press and Manipulator 30 m3 (30,000 liters)
- Required volume for flushing (approx.) 10 m3 (10,000 liters)
3.4. Compressed air
Prefill tank of Forging press
- Pressure
6-7 bar, 1 m3/min
4. Supervision to Installation and Commissioning, Start up
4.1. Supervision of installation
Mechanical and hydraulic engineers supervise the press as the press arrives at job site.
Supervision consists of examination of installation lay out, confirmation and inspection of
installation, and all technical parts relating to the press.
- Complete mechanical mounting of the power supply
- Reassembly of the press, setting, alignment the press on foundation
- Reassembly of the hydraulic system
- Reassembly of the electric control system
4.2. Supervisor: 8-10weeks
(before installation of the press on the foundation)
2ΧMechanic
2ΧHydraulic
1ΧElectric
1ΧPLC program
 
  29
IDMA31777
MakeDong Myeong
ModelHydrotek2000
YOM2008
ConditionGood Condition
PhotoSee Photo
Capacity: 2000 ton,
Stroke: 1400 mm,
Bolster: 1800 x 1800 mm
Return capacity: 150 ton,
Moving slide advance: 250 mm/sec,
Forging speed: 60 mm/sec,
Return speed: 250 mm/sc,
Pressing stroke: 1500 mm,
Daylight: 2500 mm,
Distance between columns clear width: 1800 x 1200 mm,
Bottom ratating table: dia 1500 mm,
 
  30
IDMA31548
MakeKobe,Japan
Model
YOM2000
ConditionGood Condition
PhotoSee Photo
Capacity: 3000 ton,
Pressure: 380 Kg/㎠
Forging stroke: 2100 mm,
daylight: 4600 mm,
Upsetting force: 4050 ton,
Validity column distance : W 2750 mm L 1450 mm,
Out side dimension: W x L x H 4850 x 3550 x 7250 mm,
 
  31
IDMA31356
MakeClearing
Model
YOM
ConditionVery good condition
PhotoSee Photo
Forging tonnage rating ................................................... ........................................................1,527.0 tons
Distance between column centers:
Left and right........................................................1,219.2mm...................................................48.0"
Front and back.....................................................1,066.8 mm..................................................42.0"
Ram stroke................................................................. 762.0 mm..................................................30.0"
Ram cylinder diameter .............................................. 914.4 mm..................................................36.0"
Closing speed/min....................................................1,397.0 mm..................................................55.0"
Pressing speed/min:
Minimum......................................................................1.5 mm....................................................0.06"
Maximum................................................................647.7 mm.................................................. 25.5"
Return speed/min ...................................................2,286.0 mm..................................................90.0"
Top bolster thickness .................................................127.0 mm....................................................5.0"
Bottom bolster thickness ...........................................127.0 mm....................................................5.0"
Max daylight ........................................................... 1,854.2 mm.................................................. 73.0"
This press is equipped with the following:
• (2) Pullbacks – 6” dia x 3” dia rod – 20 tons
• (2) Nordberg 6000 PSI Valve Unit Pumps
• Delta Cooling Tower
• (2) Siemens-Allis 250 HP induction motors (54.2 Amps 1780 RPM 2400 Volts)
• (2) Nordberg Vickers Pumps - Model L/6/0/R/S
• Westinghouse 500 KVA Step-Up Transformer w/ New GE Limit Controls
• Step Up Transformer – Low Voltage 480; High Voltage 2400
 
  32
IDMA31316
MakeToyo
Model
YOM1963(Overhauled:1998)
ConditionGood Condition
PhotoSee Photo
Make:TOYO(Japan make)
Stroke: 1250mm
Table:1500mm diameter
Main cylinder:890mm diameter
Hydraulic unit:112KW x2sets
56KW x2
Hydraulic pump, Motor, etc were all changed
Japan make in 1998.
Motor Manufacturing year:1998
(Motor 1)
Make:Mitsubishi(Japan)
Year:1998
Capacity:110KW
50/60HZ
6POLE,
3000V
28A
980RPM
(Motor 2)
Make:Mitsubishi(Japan)
Year:1998
Capacity:110KW
50/60HZ
6POLE,
3000V
28A
980RPM
(Motor 3)
Make:Toshiba(Japan)
Year:1998
Capacity:55KW
50/60HZ
6POLE,
200/400V, 220/440V
(Motor 4)
Make:Toshiba(Japan)
Year:1998
Capacity:55KW
50/60HZ
6POLE,
200/400V, 220/440V
 
  33
IDMA31315
Make
Model
YOM2006
ConditionGood Condition
PhotoSee Photo
Make: Hydrotek(Korea)
Pump make:Oilgear(U.S.A)
Motor make:Hyundai(Korea)
Main cylinder pressing capacity:2000ton
Man cylinder lifting:60ton
Main cylinder stroke: 1800mm
Open height:2300mm
Speed:
down:max.250mm/sec
Pressing:max.50mm/s
up:max.250mm/s
Slide table:1800 x1800mm
Bolster size:1800x1800mm
Bolser turning size:1700mm diameter 360 degree ,1unit
220KW x 6p, 3300V,4 units(Hyundai:KOREA)
Main pump:PVV 540 , 4units(Oil gear:USA)
Working pressure:245kg/cm2
Oil tank:11000 liter
Frame :4 columns
Forging tolerance:plus minus 1 mm
(Accessory equipment)
Presuure controller
Oil tank:11000 liter
Oil cooler:Water cooler
Oil level gauge:UO type
Oil thermometer:0-100 degree
Air filter:AB type
Pressure gauge:DU type
Oil heater:Electric type
(Electric equipment)
Control box:PLC/Current meter/Voltage meter/Motor Start circuit attached/Emergency stop/
Operation panel
Motor tart equipment
Emergency stp switch:Locking type
(Attache File contents)
SPECIFICATION SHEET
SLIDE FRAME DRAWING
CROWN FRAME DRAWING AND
INSPECTION REPORT
GENERAL ASSEMBLY /
FOUNDATION /
MAIN CYLINDER /
HYDRAULIC AND ELECTRIC
PUMP ROOM / HYDRAULIC MACHINERY FOUNDATION
 
  34
IDMA31132
MakeHSF
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make : HSF
Type Open die / 4 column / push down
Capacity : 1,000 /1,500ton
Stroke : 1,250mm
Working table : ψ1600mm
Main cylinder : ψ890mm
Hyd. Unit : 110kw x 2 sets
56kw x 2 sets
 
  35
IDMA31000
MakeKorean Maker
Model
YOM
Conditiondismantled partially
PhotoSee Photo
3000 metric ton open die hydraulic forging press with 20 ton manipulator of JSW Japan Make
 
  36
IDMA30862
Make
Model
YOM
Condition
PhotoSee Photo
3000Ton Kobelco Forging press
w/ 50Ton Manipulator
 
  37
IDMA30669
MakeErie
Model
YOM1989
Condition
PhotoSee Photo
Capacity-Pressing………………………………………………………………………. 1000 Tons
Bed Area (L-R x F-B)…………………………………………………………………… 48” x 48”
Top & Bottom Bolster Thickness…………………………………………………….. 6”
Daylight Between Bolsters……………………………………………………………… 72”
Stroke……………………………………………………………………………………………… 26”
Shut Height……………………………………………………………………………………. 46”
Main Ram diameter-Single Acting…………………………………………………. 26”
Side Cylinders Dia. (2)- Commercial……………………………………………… 5” x 3”
Top Ejector Capacity………………………………………………………………………. 15 Tons
Top Ejector Stroke………………………………………………………………………….. 6”
Bottom Ejector Capacity…………………………………………………………………. 15 Tons
Bottom Ejector Stroke…………………………………………………………………….. 8”
Maximum Height Under Crane………………………………………………………. 24’
Tank Area……………………………………………………………………………….. 60” x 120”
Foot Print……………………………………………………………………………………. 4’ x 7’
PRESS OPERATING SPEEDS:
Advance…………………………………………………………………………………………. in
Pressing w/Accumulator System (6” working stroke available)… 600 in/min (adj)
Return…………………………………………………………………………………….. 600 in/min
Top Ejector Extend………………………………………………………………….. 300 in/min
Bottom Ejector Extend……………………………………………………………… 300 in/min
HYDRAULIC PUMPING UNIT:
1-Axial Piston Pump
1-Double Vane Pump
1-Accumulator System
* 1-200 HP Electric Motor @ 1200 RPM, TEFC Double Shaft (Kaiser to furnish)
* Erie Press Systems requires certified print to design Pumping
unit S.A.P. –P.D.Q.
1-Full Voltage Motor Starter
Electrical Characteristics……………………………………………………………. 3/60/480
Press Operating Pressure…………………………………………………………….. 4500 PSI

THEORETICAL TIME CYCLE:
Advance 14”……………………………………………………………………………….. 1.4 Sec
Press 4”……………………………………………………………………………………… 0.4 Sec
Return 18”……………………………………………………………………………….. 1.8 Sec
Valve Response Time…………………………………………………………………. 1.5 Sec
Acceleration & Deceleration…………………………………………………………. 1.5 Sec
TOTAL……………………………………………………………………………………….. 6.6 Sec
Theoretical Strokes Per Min………………………………………………………… 6 Stk/Min
(Based on Accumulator Recovery)
 
  38
IDMA30212
MakeDnepropress
ModelPB1341
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1250 ton, Maximum ram stroke- 1250 mm, Distance from bed to movable platen when in topmost position- 2650 mm, Adjustable bed dimensions- 1250x3150 mm, Adjustable bed stroke with respect to press center line: to the left- 1400 mm, to the right- 1400 mm, Ram speed: idle stroke- 300 mm, workstroke- 150 mm, Knockout stroke above bed- 400 mm, Knockout force- 630 kN, Overall dimensions: Left to right- 16,940 mm, front to back- 11,540 mm, height above floor level- 7270 mm, Mass- 193 t
 
  39
IDMA30130
MakeSack
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 750 ton,
Stroke: 705 mm,
Daylight: 1920 mm,
Sliding table ,stroke: 1800 mm,
Turning device upper saddle:530 mm,
Width of saddle:750 mm,
Open column passage:1400 mm,
Diameter of columns: 300 mm,
 
  40
IDMA29610
MakeDnepropetrovsk,Russia
ModelPA1343
YOM1975
ConditionGood Condition
PhotoSee Photo
Nominal forging force : 2000 ton,
Slide stroke : 1600 mm,
Distance between table and slide in upper position : 3150 mm,
Pull out table :
Width : 1600 mm,
Length : 4000 mm,
Table travel : 1600 mm on each side,
Table speed : 50-300 mm/sec,
Pump productivity : 2250 L/min,
Dimensions :-
Width : 12470 mm,
Length : 17840 mm,
Height : 13740 mm,
Height above floor : 8900 mm,
Press weight : 440 ton.

FORGING MANIPULATOR.
Model : MK 30-66.
Manufacturer : Russian.
Tongs clamping moment : 60 MT,
Nominal carrying capacity : 30 MT,
Max peel rotating moment : 18 MT,
Max tongs opening : 1000 mm,
Horizontal positioning of tongs,
Max center above top of rail : 1200 mm,
Vertical lift of tongs : 900 mm,
Angle of lateral turn of tong : 3 degrees 30 min,
Angle of inclination of tong : 7 degrees 10 min,
Rotation speed of tongs : 6,1 rev/min,
Speed of manipulator : 0-35 m/min,
Dimensions : 12100 x 7000 x 4740 mm,
Weight : 172300 kg.
 
  41
IDMA28648
MakeZdas
Model
YOM1980 / 2013
ConditionGood Condition
PhotoSee Photo
Capacity : 1200 ton,
Number of main cylinder : 1,
Press type : 2 column pull down,
Diameter of main cylinder : 630 mm,
Forging capacity : 320 kg/cm2, 1100 ton,
Upsetting capacity : 340 kg/cm2, 1200 ton,
Number of return cylinders : 2,
Size of return cylindesr (lifting on annulus) : 230 x 125 mm,
Return tonnage : 220 kg/cm2, 1760 KNm,
Stroke : 1000 mm,
Daylight between bolsters : 2250 mm,
Clearance between columns : 1560 mm,
Operating speed of press : 0-130 mm/sec,
1 cylinder : 0-87 mm/sec,
Approach speed : 0-250 mm/sec,
Stroke per minute : 60-90.
 
  42
IDMA28635
MakeKramatorsk
ModelNP130
YOM1971
ConditionGood Condition
PhotoSee Photo
Used in melting shop to get stamped slabs with dimensions (mm): Hx1070x1600, Hx870h1600, Hx650x1500 from cylindrical shape work piece. Work piece material-titanium alloys grades VT1-0, ot4, ot4-0, ot4-1, etc. Hydraulic Forging press NP-130 is equipped with working in aqueous emulsion or chemically treated water hydraulic drives crosshead and sliding table and working on the mineral oil hydraulic control system shut-off and regulating and shut-off valves and valve elements regulated ballasts, are included in the portion of the hydraulic press, which works on water emulsion or water.

Max. working force of the drivers of moving cross beam and table : 32 MPa,
Nominal press force with central loading : 24500 t,
Entire cross beam stroke : 800 mm,
Working stroke of cross beam with slab forging : 450 mm,
Table : 1700 x 1100 mm,
Table stroke : 3500 mm,
Max. table speed : 300 mm/sec,
Number of hydraulic cylinder : 4,
The diameter of the piston of the working cylinder : 1890 mm,
The diameter of the rod of the working cylinder : 1000 mm,
Housing strke of the working cylinder : 800 mm,
Number of lifting cylinders : 4,
The diameter of the plunger of the lifting cylinder : 500 mm,
Stroke of plunger of lifting cylinder : 800 mm,
Balancing cylinders are missing,
Weight : 1200 t.
 
  43
IDMA28494
Make
Model
YOMNew in 2007
ConditionGood Condition
PhotoSee Photo
Hydraulic Forging Press 4000 ton + 2 Manipulators 20 - 30 ton
Power : 4000 ton,
Max diameter to be forged : 1600 mm,
Number of columns : 4,
Central Cylinder diameter : 1200 mm,
Stroke : 1900 mm,
Distance between Columns : 2880 mm,
Hydraulic Pumps : Rexroth,
Pumps : 8,
Recirculation Pumps : 2,
Flow : 725 l/min,
Pressure : 250 bar,
Operating Control Type : PLC / Free Forging,
Press dimensions over floor(LWH) : 3400 x 7050 x 7600 mm,
Weight of the Press : 220 ton.
Weight of the manipulators : 55 ton – 28 tons.
PLC Controlled.
 
  44
IDMA28059
MakeUSA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Hydraulic 1 cylinder,4 column type
Capacity: max.6000 ton, Normal 5,100 ton,
Max. press stroke: 1524 mm,
Distance between columns (LR X FB): 1320 x 2819 mm,
Number of pull back cylinder: 2ea,
Slide bed unit,
hydraulic power system,
Cooling system 400 R/T,
Control system,
Operator desk unit,
PLC control unit,
Electric power supply unit,
6600 v x 500 Kw x 6 ea (motor,
580 L/min x 12 ea (pump),
Working die and holder,
Associated machinery and equipment,
Manipulator,
Manufacture: (Japan 2008),
Rail bound type,
Capacity: 40 ton,
2 points tong unit, hydraulic type, Grip size max 1200 mm diameter,
Dimensions: 13,0 x 6.5 x 5.0 m(H),
Control system,
With associated equipment.
 
  45
IDMA27644
MakeStanko-Russia
ModelD2240
YOM1987
ConditionGood condition,under power
PhotoSee Photo
Nominal force : 1000 ton,
Ram stroke : 1000 mm,
Max. distance between table and ram : 2250 mm,
Dimensions of pull - out table : 1600 x 1800 mm,
Distance between column : 1500 mm,
Stroke of ejector : 400 mm,
Output : 44 kW,
Dimensions of machine : 6400 x 5030 x 6500 mm,
Weight of machine : 73000 kg.
 
  46
IDMA27406
MakeWumag
ModelP156
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2000 tons,
Ram stroke : 1600 mm,
Press works at 2 levels : 2,
Capacity at first level : 800 tons,
Shut height : 3200 mm,
Between columns : 2360 mm.
With 30 ton Manipulator :
Table size :-
Width : 2000 mm,
Length : 4000 mm,
Table forward stroke : 3000 mm,
Working cylinder capacity : 200 ton,
Ejector capacity : 130 tons,
Ejector stroke : 400 mm,
Ejector stroke under table : 500 mm,
No of strokes / min : 60,
Working pressure f accumulator pump station : 320 kg/cm2,
Oil consumption at working capacity : 1600 lit/min,
Air pressure : 4-8 kg/cm2,
Dimension of machine :-
length : 15100 mm,
Width : 10500 mm,
Height above floor : 8730 mm,
Height lower floor : 4360 mm.
Press Weight : 240 tons.
No of strokes is 60 after reconditioning in 80's.
 
  47
IDMA27271
MakeKorean Oilgear
Model
YOM2008
ConditionGood Condition
PhotoSee Photo
Capacity : 6000 ton,
Stroke : 2200 mm,
Daylight : 5000 mm,
Speed : 0-80 mm,
Press Power : 51 mn, 325 bar,
Main pump motor : 500kW x 6P x 3300V x 60Hz,
Boost pump motor : 75kW x 2P x 440V x 60Hz,
Pilot pump motor : 55kW x 4P x 440V x 60Hz,
Press type : 2 column push down.
 
  48
IDMA27245
MakeKojima,Japan
ModelHFP9000
YOMPress built on 2008 and still in box,well stored
ConditionBrand New
PhotoSee Photo
Pressing capacity : 9000 ton,
Table area : 1800 x 2500 mm,
Slide area : 1800 x 2500 mm,
Stroke : 1300 mm,
Daylight opening : 2700 mm,
Pressing speed ; 3 to 9.5 mm/sec,
Descending speed : 100-160 mm/sec,
Knock - Out (Upper side)
Type : Hydraulic cylinder type,
Capacity : 40 ton,
Stroke : 150 mm,
Ascending speed : 150 mm/sec,
Knock - Out (Lower side)
Type : hydraulic cylinder type,
Capacity : 100 ton,
Stroke : 300 mm,
Descending speed : 150 mm/sec,
Ascending speed : 150 mm/sec.
This line is recommendable for production of aluminum wheel.
4 columns push down.
 
  49
IDMA27239
MakeZiien (South Korea)
ModelZIN4000
YOM2010
ConditionGood Condition
PhotoSee Photo
Capacity : 4000 ton,
Open Height : 2760 mm,
Main cylinder stroke : 960 mm,
Speed down : 300 mm,
Pressing : 45 mm,
Up : 300 mm,
Tie rod inner size : 1550 x 1100 mm,
Working pressure : 310 mm,
Main cylinder ram dia : 930 mm x 2,
Main Pump : LZ500 x 1ea and LX500 x 6ea,
Main electric motor : 300 kW x 6P x 7ea,
Oil tank : 25000 liter + 16000 liter,
Noise level : 90 Below,
Frame type 4 column,
Turn table dia : 1300 mm.
 
  50
IDMA26880
MakeDnepropetrovsk,Russia
ModelD2240
YOM1967
ConditionVery good condition
PhotoSee Photo
Capacity : 1000 ton,
Table size : 1250 x 1500 mm,
Ram stroke : 1000 mm,
Ram speed : 60 mm/s,
Distance between table and ram : 2250 mm,
Main motor power : 36 kW,
Press dimensions : 6400 x 5225 x 6300 mm,
Press weight : 75000 kg,
Press is equipped with moving bolster.
 
  51
IDMA26594
MakeDnepropetrovsk,Russia
ModelPA1341
YOM1975
Conditioncomplete,dismantled and ready for loading
PhotoSee Photo
1250 tons,
Max. ram stroke 1250 mm,
Distance from bed to movable platen when it topmost position 2650 mm,
Adjustable bed dimensions 1250 x 3150 mm,
Adjustable bed stroke with respect to press center line :
- to the left 1400 mm,
- to the right 1400 mm,
Ram speed :
- idle stroke 300 mm,
- workstroke 150 mm,
Knockout stroke above bed 400 mm,
Knockout force 630 kN,
Overall dimensions :
- Left to right 16940 mm,
- Front to back 11540 mm,
- Height above floor level 7270 mm,
Mass approx. 193 t.
Forging accuracy +/- 1,5 mm;
Control manual / semi-automatic (ram stops at lower position) / automatic;
Press hydraulics
type water & oil emulsion ( water )
pressure 320 kgs/ cm2
size of tank 500 l
pumps capacity 1500 l / min
air pressure at filing tank 6….8 kgs/cm2
. Press dimensions
16940 x 11540 x 11410mm
height above the floor 7270mm.
Forging Manipulators - 5 tons a year of issue 1962 Electrostal.
 
  52
IDMA26124
MakeSchloemann
Model
YOM1985
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton,
With 3 ton DANGO manipulator,
Running pressure : 315 kp/cm2,
Compressing force : 1000 Mp,
Retiraction force : 240 Mp,
Piston stroke : 800 mm,
Clear space between gripping surface : 2250 mm,
Dimensions of the stand : 2000 x 1440 mm,
Stroke of the regulation device : 2 x 900 mm,
Maximum press height : 4000 mm,
maximum depth of the foundation : 5000 mm,
Speed and Performances :-
Speed of descent : 250 mm,
Compressing speed : 110 mm,
Retraction speed : 250 mm,
Start - up :-
Hydraulic installation (HD) for the press operation consists in .
1) Hydraulic pumps type Fabrikat Nepuko, RP315-500, adjustable radial:
Flow rate for 200kp/cm2 : 715 1/min,
Flow rate for 315 kp/cm2 : 450 1/min,
Number of rotations per minute : 750 U/min,
Starting power : ca 20 kW,
2) Filling Pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Starting power : 22 kW,
Number of rotations per minute : 3000 U/min,
3) Cooling pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Working power : 22 kW,
Number of rotations per minute : 3000 U/min.
For each hydraulic pump consisting in :-
Lubricating pump,
Pressure sensors,
Filter,
Recirculation equipement,
Safety valve.
An oil supply installation consist in :-
1) ND oil pump,
Running pressure : 100 kp/cm2,
Flow rate : 180 1/min,
Operation spindle power : 37 kW,
Number of rotations per minute : 1500 U/min,
2) Electrically driven valve,
3) Pressure switch,
4) Safety valve for the running circuit and all required off shuttings,
5) ND oil pump with mountings,
Running pressure : 100 kp/cm2,
Total capacity : 2 x 32 1/mm,
Useful capacity : 131 mm.
1000 ton Schloemann press wit Dango manipulator, The press is very litle used as mechanic and hydraulic. Need new control.

The press was installed new in 1985 and operated till 1990.
The press is very little used as mechanical parts and the hydraulic pumps were like new at my last inspection one year back.
Because of so many years of being not operated the electrical control and PLC needs to be replaced. all
documentations is available.
 
  53
IDMA26111
MakeIMGB,Romania
Model
YOM1985
ConditionGood Condition
PhotoSee Photo
Capacity : 1600 tons,
Stroke : 1450 mm,
Distance between columns : 2000 mm,
Table surface area : 2400 x 1200 mm,
Daylight : 2960 mm,
Ram stroke speed under load : 100 mm,
Ram speed return movement : 300 mm,
Ram surface,
Stroke speed,
Total power requirement,
Weight of the machine ca including manipulator : 300 kg.
12 ton forging manuipulator :-
Rail move,
Weight of heaviest lift : 12 ton,
Momentum : 25 ton,
Speed on the rail : 1.5 to 30 mm,
jaw height over rail : 800-1600 mm,
Vertical movement of the jaw : 800 mm,
Horizontal movement of the jaw : 200 mm,
Rotation of jaw : 2-18 rot/min,
Angle of vertical inclination : +- 5 deg,
Angle of horizontal inclination : +- 6 deg,
Total weight of manipulator : 70 ton,
Overall dimensions : 8000 x 32000 x 2900 mm.
 
  54
IDMA26089
MakeDemag
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2000 ton,
Stroke : 1500 mm,
Shut height : 3000 mm,
Table size : 1300 x 2700 mm,
Approach speed : 30 mm,
Return speed : 350 mm.
Dimensions L x B : 5000 x 4000 mm,
Distance between the columns : 1600 / 2100 mm,
Weight of machine : 285 ton.
Mode of operation oil hydraulic.
 
  55
IDMA26087
MakeHdraulik Duisburg
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton,
Stroke : 1000 mm,
Shut height : 2000 mm,
Height of machine above floor : 7400 mm,
Height of machine below floor : 3030 mm,
Distance between the columns (left to right) : 2000 mm,
Distance between the columns (front to back) : 1250 mm,
Working pressure : 200 bar,
Total Weight : 183 ton.
note that this press needs new electrics and a new hydraulic drive.
 
  56
IDMA25702
MakeHBE Korean
Model
YOM
ConditionBrand New
PhotoSee Photo
Nominal and upsetting force : 5000 ton,
Max. press stroke : 2500 mm,
Specification x Quantity of main cylinder : 730 mm Dia x 3 sets,
Press daylight : 5000 mm,
Press force stage at 400 bar,
- 1 stage (one central cylinder) 16.7 MN (1670 tons),
- 2 stage (two side cylinders) : 33.46 MN (3346 tons),
-3 stage (three all cylinders ) : 50 MN (5000 tons),
Distance between columns (clear width) : 4000 mm x 1800 mm,
Number of pull back cylinders : 4,
eccentric loading at 50 MN - in line of fronging at right angle to line at forging : 200 mm either side 400 mm press center,
Table shifting device stroke (left, right) : 3000 mm x 3000 mm,
Table area (width x length) : 2800 mm x 6000 mm,
Die magazine : 4 die magazine,
Tolerance of lower dies to be shifted : 2 mm,
Hydraulic pumps : 8 sets x RX360(2), RF1000(6)
High press. Radial piston pump
- Wepuko, Germany
- total flow 7500 I/min (320 bar
6000 I /min (400 bar),

80 ton Ril Bound Manipulator of SACK,
Capacity : 800 kN,
Tongs clamping moment : 2000 kNm,
Tongs openings without inserts, round: 800/2000 mm round
- with inserts : 200-800 mm round,
- with extension arms : 100-2800 mm round & square,
Max. turning diameter with extension arms : 3900 mm,
Min tongs centre height above rails : 1700 mm,
Max. tongs centre height above rails : 4500 mm,
Vertical stroke of tongs parallel to floor : 2800 mm,
Vertical tilting angle of tongs : Up 15 deg ( down to floor),
Centre rail distance : 5000 mm.
 
  57
IDMA25541
MakeSchloemann
Model
YOMPut into operation 1961 and upgraded in 2005
ConditionGood Condition
PhotoSee Photo
Capacity : 2500 ton,with 10 t manipulator,
Table size : 2900 x 2000 mm,
Water based,
Press weight : 370 ton,
Vertical travel : 2300 mm,
Working pressure – 125 bars;
Max. work piece length – 16.000 mm,
Work piece weight (limit depending on the rolling bridge) – 40 tons
Weight of manipulator : 70 ton.
 
  58
IDMA25285
MakeSung Kwang SKEM
ModelHF3000
YOM2009
ConditionGood Condition
PhotoSee Photo
Capacity : 3000 ton,
4- column push down frame,
Main cylinder stroke : 2500 mm,
Open height : 2400 mm,
Press Speed :
Down : 25 mm/sec,
Forging : 150 (at 1050 ton),
75 (at 2100 ton),
50 (at2620 ton),
up 250,
Inside of tie : Rod 2400 x 1800,
Table shft cap : at 250 bar,
Pull : 135 ton,
Push : 120 ton,
Main cylinder ram oie : 1100 mm,
Working pressure : 280 kg㎠,
Main motor : 300 Kw 6p 440v X 4EA,
Sub motor : 37 Kw X 1 EA,
Main pump,
L x 500 x 4EA,
Lz 500 x 1EA,
Main oil tank : 14,000 L,
Motor : 15 Kw 4P 440V,
Pre fill oil tank : 2,500 L,
Forhe servo v/v unit 4 set,
Noise level : 900 b(A),
Hydraulic pump servo control,
Manual/Semi auto operation,
Control box,
Operation Panel.
 
  59
IDMA24829
MakeDnepropress
ModelPA1343
YOM1975/1991
ConditionGood Condition
PhotoSee Photo
Norminal forging force : 2000 ton,
Max. ram stroke : 1600 mm,
Distance between table and slide in upper position : 3150 mm,
Pull out table : W 1600 x L 4000 mm,
Table travel : 1600 mm on each side,
Table speed : 50-300 mm/sec,
Pump productivity : 2250 L/min,
Dimension : W 12470 x L 17840 x H 13740 mm,
Weight : 440000 kg.
With manipulator 30 tons capacity
 
  60
IDMA23319
MakeChinese
ModelTHP10-1000
YOM
ConditionBrand New
PhotoSee Photo
Capacity 10000kN,
Frame Type
Max. oil pressure 25Mpa,
Max. daylight 2300 mm,
Stroke of slide 1000 mm,
Valid area between columns (L-RxF-B) 1400x1600 mm,
Speed of slide: Fast down 300 mm/s, working 50 mm/s, Return 300 mm/s,
Knockout force 150 kN,
Knockout stroke 50 mm,
Eject force 500 kN,
Eject stroke 500 mm,
Total power ~650 KW.
 
  61
IDMA22745
MakeFarquhar
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity-Main Vertical Movement 3500 Tons,
Distance Between Posts 900 mm,
Daylight-Between Bolsters 1500 mm,
Stroke of Main Cylinder 900 mm,
Diameter of Main Cylinder 1050 mm,
Diameter of Ram Guide Posts (6)275 mm,
Capacity of Horizontal Cylinders (3)…Each 1225 Ton,
Spacing of Horizontal Cylinders around Press 120°,
Stroke of Horizontal Cylinders 450 mm Ea,
Cylinder Bore of Horizontal Cylinder 625 mm,
Rod Diameter of Horizontal Cylinder 200 mm,
Speed of Main Vertical Movement-Approximate 500 IPM,
Oil Capacity-Approximate 2500 Gal,
Motors 400HP x 2 and 350HP x 2
Max Height Above Floor 25 ft,
Weight-Approximate 470,000 lbs.
CONDITION: Good-One horizontal cylinder assembly is missing. Last used to forge steel flanges and used as a pre-form press with a ring roll and for open die forging.
Hydraulic System Updated in 1990’s
This is an unusual press having not only the capacity of 3500 ton from the main cylinder but also having three 1225 ton horizontal cylinders. The horizontal cylinders are 12” above the bolster and spaced at 120° apart around the press. The press is rated at a total tonnage of 7200 tons.
 
  62
IDMA19666
MakeDnepropetrovsk,Russia
ModelDA2240A
YOM1975 rec 2008
ConditionReconditioned
PhotoSee Photo
1000 Tons , Capacity of raising of cylinder 200, Capacity of central ejector:
at working stroke 160 tons ,
at return stroke 80 tons ,
Capacity of side ejector:
at working stroke 25 tons ,
at return stroke 20 tons ,
Capacity of bed lift cylinder 25 tons ,
Pressure of hydraulic fluid 32 MPA ,
Ram stroke 1000 mm , daylight 2250 mm , bed size 1250 x 1500 mm ,
Stroke of central ejector over bed 250 mm ,
Stroke side ejector over bed 350 mm ,
Stroke of bed 1500 mm ,
Actuator : Individual oil non hydraulic accumulator,
Conveying speed of ram, mm/sec.
at no-load operation 60 mm/sec ,
at working stroke and at pressure to 8 MPa 7,8 mm/sec,
at working stroke and at pressure 8…32 MPa 1,7 mm/sec ,
at working stroke and at pressure to 8 MPa 44 mm/sec,
, at working stroke and at pressure 8…32 MPa 9,3 mm/sec ,
Conveying speed of central ejector, mm/sec.
at no-load operation
at working stroke and at pressure to 8 MPa 52 mm/sec ,
at working stroke and at pressure 8…32 MPa 11 mm/sec ,
at working stroke and at pressure to 8 MPa 100 mm/sec ,
at working stroke and at pressure 8…32 MPa 21 mm/sec .
Conveying speed of side ejector:
at working stroke 69 mm/sec ,
at return stroke 82 mm/sec ,
Conveying speed of bed:
Onto press 85 mm/sec ,
Out of press 70 mm/sec ,
Overall dimensions of press 6400 x 5030 x 9800 mm ,
Height of press above floor level 6300 mm ,
Actuator capacity 28,36 kW ,
Press weight 77 tons.
 
  63
IDMA19618
MakeChinese
Model
YOMBrand New
ConditionBrand New
PhotoSee Photo
1500 tons , table size 2400 x 2400 mm, stroke 600 mm, open height 800 mm. For Ring , have blanking, piercing and starightening function.
 
  64
IDMA16190
MakeChinese
Model
YOM
ConditionBrand New
PhotoSee Photo
Max pressure (to main slide) 7000 kN, piercing force (to vice slide) 1000 kN, Max oil working pressure 28.5 MPa, Daylight 1650 mm, Stroke of main slide 850 mm, Dia of upper die (on main slide) 600 mm, Dia of upper anvil 600x300 mm, Dia of lower anvil 600x400 mm, Dia of final piercing anvil 350x650 mm, Movable worktable 2 stations, Lenght of worktable 1200 mm, Width of work table 1000 mm, Stroke 1400 mm, Center distance between upsetting and final piercing position 515 mm, Height from face of moveable worktable to floor 0 mm,Speed 200 mm/s, Height from floor to face of lower anvil 400 mm, Speed of main slide:Down 300 mm/s,Return 300 mm/s, Final piercing speed:Fast 180 mm/s,Slow 100 mm/s,Max speed when Max pressure working on main slide 50 mm/s, Main motor power 550 Kw, Height above floor approximately 6900 mm.
 
  65
IDMA15985
MakeChinese
Model
YOM
ConditionBrand New
PhotoSee Photo
Capacity 1250 Ton, Structure: Three-beam four-pillar type, Oil cylinder diameter 800 mm, Slider stroke 1200 mm, Diameter of vertical pillar 300 mm, Net idle distance 2100 mm, Dimensions of movable table 3000x1200 mm, Idle speed 300 mm/s, Working Speed 45 mm/s, Center distance for vertical pillar 2200x1100 mm, Motor power 660 KW, Upset forging Billet 6 Ton, Height above floor 7500 mm.
 
  66
IDMA15969
MakeChinese
Model
YOMBrand New
ConditionBrand New
PhotoSee Photo
1250 tons,System pressure 25Mpa,
Oil cylinder diameter 800 mm,
clean distance 2400 mm,
slide stroke 1200 mm,
column diameter 300 mm,
column centre distance 2200 x 1300 mm,
return speed 300 mm/s,
working spead 45 mm/s,
down speed 300 mm/s,
working platform zise 3000 x 1400 mm,
platform speed 200 mm/s,
fast forge rate 45/minute,
max eccentricity 80 mm,
max ingot canbe forged 10,
main motor power 440kw,
height above the ground 8000 mm.
 
  67
IDMA15411
MakeKobelco(Kobe Steel)
Model
YOM1978
ConditionDismantled,Good condition
PhotoSee Photo
4-Column
3-Cylinder Oil Hydraulic Pull-Down type Forging Press
. 4000 tons , Ram stroke 2100 mm,
Max daylight 4600 mm,
Table dimensions:
front-to-back 5000 mm,
left-to-right 2350 mm,
table travel (either front or back5250 mm,
Column dims (square) 480.0 mm ea side, Opening between the column shields
front-to-back 2750 mm,
left-to-right 1450 mm,
Distance between the columns
front-to-back 3020 mm,
left-to-right 1690 mm,
Column center to center distance
front-to-back 3500 mm,
left-to-right 2750 mm,
Return cylinder diameters
internal 280 mm, external 507 mm, Sliding tool manipulator dims:
tool slide cylinder stroke 2500 mm,
tool manipulator width 2120 mm,
length of tool changer 9250 mm,
Approx press dimensions
total length of press top to bottom12756 mm,
floor level to topmost portion of press7038 mm,
floor level to bottom of pit 10000 mm,
press length with moving table platform20900 mm,
press width w/sliding tool manipulator 11500 mm,
System hydraulic pressure 315.0 Bar ,
Each hydraulic pump power rating (x7) 350.0 kW ,
Total hydraulic pumps 2,450.0 kW ,
Line weights as follows:
press with moving table 520 tons,
oil hydraulic system 140 tons ,
piping 46.15 tons ,
electrical system 18.05 tons,
total line weight 724 tons,
Equipped with:
Pull-Down type action
Four (4) square columns - provides precise stability
Three (3) cylinders – provides well balanced force when forging
Complete Hydraulic system with (7) 350kW pumps,
Complete electrical system,
Complete Electronic system,
Operator''s control Room,
Sliding table for moving forgings (front to back),
Sliding tool manipulator for tool changing (Left to right),
Extensive documentation,
Note: This press is equipped with a hydraulic system consisting of seven (7) 350kW (470hp) pumps which generate 315 bar (4,570psi).
Includes providing these parts (NEW). A list
is as follows:
1. Lower Cross Slide w/two kicker brackets.
2. Two of the three main rams.
3. Four tie-rod nuts.
 
  68
IDMA15194
MakeRussian
Model
YOM1943
ConditionWorking
PhotoSee Photo
max capacity developed by press from accumalator 1000 tons , max capacity developed by presss from multiplicator 2000 tons , max travel of moveable cross rail 1905 mm, max opening between moveable cross rail and table 3187 mm, number of columns 4 , distance between columns in light : in front 2790 mm, in depth 810 mm, column dia 406 mm, table size 2500 x 3500 mm, size of platform of moveable cross rail for fixing tools : in front 2690 mm, in depth 603 mm, number of main cylinders 2 , piston size of main cylinders dia (plunger) 578 mm, Max. Capacity of inverse cylinders 1256 t, Ram size of inverse cylinders: Dia. 200 mm, Area 314, Max. Capacity counterweights of cylinders 38t, Number of cylinders couonterweight 2, Ram size of cylinders counterweights: dia. 110 mm, Area 95cm, Movable Table: max. capacity developed by tables travel cylinders from press 831t to 831t, Table travel with inversion to the right 4000 mm, to the left 4000 mm, Ram size of table travels cylinders : Dia. 230 mm, Area 4155 cm, Drive And Speed:
Working pressure ofr water in main cylinders of accumulator 200kg/sm, Travel speed of cross-arm with k = 0,75, with Idle stroke, Speed travel of a table to press 20 cm/set, from press 20 cm/set.
Dia. of moving ram 440 mm, Dia. of non - moving ram 300 mm,
dia of inverse ram 100 mm, Ram stroke 2050 mm,
Dimensions: Width 29880 mm, Depth 5842 mm, Height above the floor 9170 mm, Weight of press without table 240t.
top