Category : Forging Equipment

Sub-Category : Press Friction Screw

Total Machines Found : 169

Select | Machine Details
 
  1
IDMI7877
MakeVaccari
Model7PS
YOM
ConditionGood Condition
PhotoSee Photo
CAPACITY 230 TON
STROKE 300
STROKE PER MIN 40 - 55 spm
WEIGHT OF THE MACINE CA. 7600 KG
TABLE SIZE 470 x 365 MM
DIMENSION 3650 x 2050 x 2000 MM
 
  2
IDMA35019
MakeHasenclever
ModelFPRN224/500/335/895
YOM1971
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Allowd max. force: 800 ton,
Blow die to die: 1000 ton,
Stroke: 335 mm,
Stroke rate: 32 1/min
Distance between columns: 520 mm,
Side window: 520 x 895 mm,
Daylight (max. stroke up, adjustment up): 835 mm,
Surface of table: 500 x 700 mm,
Surface of ram: 485 x 710 mm,
Diameter of screw:24 mm,
Power requirement: 36 kW
Weight: 19,70 ton
 
  3
IDMA35018
MakeStanko-Russia
ModelF1738
YOM
ConditionGood Condition
PhotoSee Photo
capacity:630 ton
Max. ram stroke 520 mm
Stroke per minute 25
Table-size 1000 x900 mm
Surface area of ram 800 x 800 mm
Distance between columns 800 mm
Dayligth 500 mm
Height over floor 6155 mm
Total height 6655 mm
Total power requirement 90 kW
Weight of the machine ca. 45 ton
Dimensions H 6,7 x B 2,5 x T 1,0 m
 
  4
IDMA35008
MakeBerrenberg
ModelRSSP200/400
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton
Allowed max. force: 600,00 ton,
Blow die to die: 800,00 ton,
Stroke: 280 mm,
Stroke rate: 56 1/min,
Daylight (max. stroke up, adjustment up):680 mm,
Surface of table: 560 x 750 mm,
Surface of ram: 560 x 560 mm,
Diameter of screw: 200 mm,
Power requirement: 37,0 kW,
Weight: 12,00 ton,
Dimensions (WxDxH): 2,2 x 2,0 x 4,25 m
 
  5
IDMI7857
MakeHirson
Model
YOM
ConditionGood Condition
PhotoSee Photo
200t
135mm die screw
 
  6
IDMA34956
MakeSchuler
ModelPA200F
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 640 ton
Press force, continuously
permissible at centric load [kN] 6,400
Hard-on-hard blow force, permissible
at 10% of the strokes [kN] 8,000
Gross working capacity [kNm] 19
Screw diameter [mm] 200
Stroke, max. [mm] 400
Table area (L-R/F-B) [mm] 750/710
Slide area (L-R/V-H) [mm] 620/650
Table ejector (force/stroke) [kN/mm] 25/80

EQUIPMENT:
Machine including electrical equipment
Table ejector
Press control with Forge-Control-System (FCS)
MAIN FEATURES
Direct drive
No friction-loaded drive elements
No wear high efficiency
Simple construction less downtime due to maintenance
Precise energy control possible high repeat accuracy
Control via frequency converter
Press force measuring device
User interface
Intuitive user interface
Use of pictograms or clear text in many languages
(New running condition press, not used in production)
 
  7
IDMI7735
MakeRussian
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capasity : 630 TON
 
  8
IDMI7725
MakeImported
Model
YOM
ConditionGood Condition
PhotoSee Photo
Down stroke
Capacity: 200 ton
 
  9
IDMA34559
MakeStankoimport
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Specification:
Nominal effort: 400 tons
Max. slide stroke: 450 mm
Number of strokes per 1 min max. stroke: 30
Table size:
-Right-to-left: 780 mm
-Front-to-back: 880 mm
Total power requirement: 50 kW
Press dimensions:
-Width: 4400 mm
-Length: 2360 mm
-Height: 5500 mm
Weight: 30000 kg
 
  10
IDMA34222
MakeStanko-Russia
ModelF1734
YOM
ConditionGood Condition
PhotoSee Photo
Nominal effort: 250 tons
Effective energy not lower: 1250 kgcm
Max slide stroke: 350 mm
No of strokes per 1 min max stroke: 34
Ram size, front to back: 530 mm
Table size:
-Right-to-left: 670 mm
-Fron-to-back: 750 mm
Min distance between table and slider (in lower position of slider): 420 mm
Total power requirement: 36 kW
Press dimensions:
-Width: 3710 mm
-Length: 1925 mm
-Height: 4450 mm
Weight: 15500 Kg
 
  11
IDMI7618
MakeWilson
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton
 
  12
IDMI7598
MakeHasenclever
ModelVPSR 120
YOM
ConditionGood Condition
PhotoSee Photo
NORMAL CAPACITY : 140 TON
SCREW : 120 MM
STROKING RATE : 320 MM
TABLE : 200 X 300 MM
DISTANCE TABLE/ RAMTOP DEAD CENTER : 500 MM
MOTOR : 15 KW
DIMENSTIONS :
WIDTH : 1700 MM
DEPTH : 1100 MM
HEIGHT : 3100 MM
APPROX WEIGHT : 8 TON
 
  13
IDMA34187
MakeEnomoto
Model150BF
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 150 ton,
Stroke length: 250 mm,
Shut height: 525 mm,
Bed area (FB x LR): 550 x 580 mm,
Main motor: 15 kw,
 
  14
IDMA34048
MakeMuller
ModelFP 400/25
YOMNew in 1987
ConditionGood Condition
PhotoSee Photo
Capacity - 400tons
total power requirement 30 380 kW
weight of the machine ca. 16 t
dimensions of the machine ca. 1 x 1,8 x 4 m
Spindle diameter 225 mm
pressure 400 t
slide stroke 320 mm
bandage 1000 x 100 x 22 mm
 
  15
IDMA33714
MakeFicep
ModelPVS250
YOM
Condition
PhotoSee Photo
FRICTION SCREW PRESS FICEP PVS 250- WORKING CONDITIONS
Diam. of the screw mm. 250
Max. force kN. 12.600
Max useful energy -net Kgm 4.700
Max useful energy-gross Kgm 7.000
Stroke of the ram mm. 575
Strokes per min. n. 24
Distance between ram and table mm. 650
Table area:
Width
Depth
mm. 900 mm.
600
Ram area:
Width
Depth
mm. 600 mm.
390
Main motor kW. 56
Approx. weight kg. 30.000
PRICE OF THE USED MACHINE IN WORKING CONDITIONS
WITH EXISTING ELECTRICAL CABINET - EURO 245,000
OPTIONAL DEVICES IN ORDER TO FORGE YOUR BOLTS
BOTTOM SYSTEM WITH TILTING TABLE- EURO 45,000
EJECTOR SYSTEM TO LENGHT WITH MANUAL ADJUSTMENT
POWER TON 10, STROKE 200mm, INCLUDED HYDRAULIC UNIT - EURO 54,000
 
  16
IDMI7326
MakeWeingarten
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1600 ton
 
  17
IDMA33669
MakeRussian
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:400 ton
Slide stroke, mm 450
The distance between the table and the crosshead, 450 mm
The distance between the table and the crosshead, 450 mm
Main drive power 50 kW
Table size width / length mm 780/880
Machine dimensions Length Width Height (mm) 4400_2360_5500
Weight 30000 kg
 
  18
IDMI7308
MakeHasenclever
ModelFPRN400
YOM1970
ConditionGood working condition
PhotoSee Photo
Capacity : 1600 ton
Stroke : 550 mm
Stroke per Minute : 18
Slide Area : 880 x 900 mm
Bed Area : 880 x 900 mm
Shut Height : 1085 mm
Upper Ejector : NIL
Lower Ejector : 80 mm
Main Motor : 150 kw
Screw dia : 400 mm
PLC:Mitshubishi Q06 CPU
 
  19
IDMI7307
MakeDellavia
Model
YOM1986
ConditionGood working condition
PhotoSee Photo
Capacity : 1200 ton
Stroke : 310 mm
Stroke per Minute : 30
Slide Area : 670 x 750 mm
Bed Area : 700 x 750 mm
Shut Height : 775 mm
Upper Ejector : NIL
Lower Ejector : 80 mm
Main Motor : 75 kw
Screw dia : 330 mm
PLC:Siemens S7/300
 
  20
IDMI7306
MakeFicep
ModelPVM280
YOM1995
ConditionGood working condition
PhotoSee Photo
Capacity : 800 ton
Stroke : 360 mm
Stroke per Minute : 41
Slide Area : 670 x 890 mm
Bed Area : 670 x 890 mm
Shut Height : 740 mm
Upper Ejector : NIL
Lower Ejector : 80 mm
Main Motor : 45 kw
Screw dia : 280 mm
PLC: Siemens S7/300
 
  21
IDMA33637
MakeRussian
ModelF1734A
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons.
 
  22
IDMI7294
MakeHasenclever
ModelFprn 400
YOM
Condition
PhotoSee Photo
Capacity- 1600 tons
With PLC panel. Stroke length 500
Bed 880x900
Shut ht 1085mm
 
  23
IDMA33548
MakeWeingarten
ModelPS300
YOM1974
ConditionDismantled,Good condition
PhotoSee Photo
Pressing capacity in t: 600 nominal / 1400 max.
Opening between the stands in mm: 770
Height above floor in mm: 5500
Stroke per minute: 33-45 (22 usable)
Stroke in mm: 160 - 480
Table size (lxb) in mm: 700 x 800
Ram size (lxb) in mm: 700 x 800
Daylight in mm: 670 - 1150
Total power consumption in kW: 75
Total weight in kg: 38.200
Mode of operation:
mechanical
Description:
Used screw press WEINGARTEN PS 300 with direct drive. The WEINGARTEN PS 300 has been dismantled recently, but has worked without complaint until the end.
 
  24
IDMA33499
MakeWeingarten
ModelPS300
YOM1974
ConditionGood Condition
PhotoSee Photo
Pressing capacity in ton: 600 nominal / 1400 max.
Opening between the stands in mm: 770
Height above floor in mm: 5500
Stroke per minute: 33-45 (22 usable)
Stroke in mm: 160 - 480
Table size (lxb) in mm: 700 x 800
Ram size (lxb) in mm: 700 x 800
Daylight in mm: 670 - 1150
Total power consumption in kW: 75
 
  25
IDMA33497
MakeWeingarten
ModelP160
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 180 ton
Screw diameter 160 mm
Stroke 450 mm
Stroke per minute 25-35
Table area 600x600 mm
Ram area 500x530 mm
Distance table/ram 700/250 mm
Way between uprights 570 mm
Motor 11CV
Weight 7000 kg
 
  26
IDMA33495
MakeLasco
ModelSPP315
YOM1998
ConditionGood Condition
PhotoSee Photo
Maximum force : 500 ton
Screw diameter : 190 mm
Stroke : 380 mm
Number of strokes : 45 s.p.m.
Daylight : 700 mm
Table surface area : 630 x 630 mm
Ram surface area : 600 x 600 mm
Cushion capacity in table : 5 ton
Cushion stroke : 100 mm
Required power : 13 kW
Height over floor approx. : 4.250 mm
Weight of machine approx. : 13,6 ton
 
  27
IDMA33494
MakeBoniardi
ModelLS-280
YOM1971
ConditionGood Condition
PhotoSee Photo
Pressing capacity : 450 ton
Main motor capacity in kW : 29
Stroke per minute : 18
Stroke in mm : 500
 
  28
IDMA33348
MakeWeingarten
ModelPA160
YOM
ConditionGood Condition
PhotoSee Photo
NOMINAL CAPACITY: 250 T
CONTINUOUS LOAD CAPACITY: 400 T
CALIBRATION FORCE: 500 T
SCREW : 160 mm
VARIABLE STROKE: 120-350 mm
TABLE: 540 x 600 mm
DAYLIGHT TABLE/RAM
Stroke down-stroke up : 250-600 mm
MOTOR: 10 KW
HEIGHT ABOVE FLOOR: 3680 mm
WEIGHT: 7130 KG
 
  29
IDMA33310
MakeEnomoto
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 600 ton
Stroke : 800 mm
Shut Height : 430 mm
Open Height : 1230 mm
Bed Area : 440 x 1040 mm
Ram : 440 x 560 mm
Screw Diameter : 225 mm
Ram Speed : 800 mm/sec
 
  30
IDMA33222
Make
Model
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity 1300 tons
Table dim. 1000x1000 mm.
Ram surface dim; 915 x 860 mm
Space between pillars; 1080 mm
Ram stroke 600 mm
Press weight 80 tons
 
  31
IDMA33142
MakeMuller Weingarten
ModelPSM4.360
YOM1991 new roller and thrust bearing 2013
ConditionGood Condition
PhotoSee Photo
Tie rods - 4
Screw diameter - 360 MM
Gross working energy - 140 kNm
Nominal force - 13,000 Kn (1400 ton)
Continuously permitted force - 21,000 Kn (2400 ton)
Die-to-die blow force - 26,000 Kn (2800 ton)
Strokes per minute - 24
Stroke of slide - 180 MMM - 520 MM
Distance between table & ram - 1000 MM (stroke down)
Distance between table & ram - 1520 MM (stroke up)
Width between guides - 950 MM
Clamping area - 930 MM (l-r)
Clamping area - 1000 MM (f-b)
Includes:
Press controls, motors and electrics
Approximate dimensions:
Height above the floor - 6300 MM
Press weight - 160,000 lbs estimate
 
  32
IDMA33131
MakeStanko-Russia
ModelF1734A
YOM1992
ConditionGood Condition
PhotoSee Photo
Allowable effort: 400 ton
Nominal effort: 250 ton
Effective energy not lower: 2100 kgcm
Max slide stroke: 400 mm
No of strokes per 1 min max stroke: 30
Ram size, front to back: 560 mm
Table size:
-Right-to-left: 670 mm
-Fron-to-back: 750 mm
Min distance between table and slider (in lower position of slider): 420 mm
Lower ejector:
-Effort: 16 ton
-Max movement: 106 mm
Motor power: 30 kW
Press dimensions:
-Width: 3610 mm
-Length: 1990 mm
-Height: 4930 mm
Weight: 18000 Kg
 
  33
IDMA33130
MakeRussian
ModelF1732
YOM
ConditionGood Condition
PhotoSee Photo
Nominal effort kN 1600
Kinetic energy of moving parts at the end of maximum slide-block travel kilojoule 12,5
Slide-block maximum travel mm 320
Slide-block number of travels per minute 34
Table dimensions mm 650 x 580
Overall dimensions mm 2320 x 2560 x 4025
Weight kg 11320
 
  34
IDMA32898
MakeHasenclever
ModelFPR355
YOM
ConditionGood Condition
PhotoSee Photo
Screw diameter, mm 355
Nominal force, t 1250
Maximum force, t 2500
Gross energy, kJ 196
Forming energy at nominal tonnage, kJ 130
Ram stroke, mm 530
Strokes per minute 18
Bed area:
- width, mm 900
- depth, mm 1180
Distance between uprights:
- below guides 900 mm
- between guides 720 mm
Minimum daylight (raw down), mm 1060
Maximum daylight (ram up), mm 1590
Motor rating, 120 HP
Weight 63,1 ton
 
  35
IDMA32891
MakeRussian
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Nominal effort kN 4000
Slide stroke, mm 450
The distance between the table and the crosshead, 450 mm
The distance between the table and the crosshead, 450 mm
Main drive power 50 kW
Table size width / length mm 780/880
Machine dimensions Length Width Height (mm) 4400_2360_5500
Weight 30000 kg
 
  36
IDMA32682
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
200 ton
 
  37
IDMI7097
MakeSpiertz
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton
 
  38
IDMA32407
MakeHasenclever,Germany
ModelFPRN1600
YOM
ConditionGood Condition
PhotoSee Photo
NOMINAL CAPACITY: 1600 T
PERMISSIBLE CAPACITY IN: 2500 T
CONTINUOUS OPERATION
IDLING STRIKE CAPACITY: 3150 T
RAW POWER: 28 mMp
FORMING POWER AT NOMINAL: 19 mMp
CAPACITY
SCREW : 400 mm
TABLE AREA: 900 x 1250 mm
RAM AREA: 900 x 1250 mm
STROKE: 600 mm
MINIMUM DAYLIGHT: 1000 mm
(ram down)
MAXIMUM DAYLIGHT: 1600 mm
(ram up)
DISTANCE BETWEEN UPRIGHTS : 950 mm
THEORICAL STROKING RATE: 18 cps/mn
USABLE STROKING RATE: 12 cps/mn
MOTOR: 120 kW
WEIGHT: 120T
 
  39
IDMA32406
MakeHasenclever,Germany
ModelFPR250
YOM
ConditionGood Condition
PhotoSee Photo
NOMINAL CAPACITY: 575T
DISTANCE BETWEEN UPRIGHTS: 715 mm
MAX. STROKE: 420 mm
SCREW : 250 mm
STROKING RATE: 25 s.p.m
TABLE: 565 x 900 mm
RAM: 545 x 800 mm
AVAILABLE HIGH WHILE RAM DOWN: 650 mm
AVAILABLE HIGHT WHILE RAM UP: 1070 mm
MOTOR: 58,5 HP
APPROX WEIGHT 28,5T
 
  40
IDMA32338
MakeRussian
ModelF1736
YOM1983
ConditionGood working condition
PhotoSee Photo  |  See Video
Nominal effort kN 4000
Slide stroke, mm 450
The distance between the table and the crosshead, 450 mm
The distance between the table and the crosshead, 450 mm
Main drive power 50 kW
Table size width / length mm 780/880
Machine dimensions Length Width Height (mm) 4400_2360_5500
Weight 30000 kg
 
  41
IDMA32172
MakeWeingarten
ModelPSS480
YOM1978
ConditionGood Condition
PhotoSee Photo
Nominal capacity: 2300 tons
Max. capacity: 3600 tons
Course stroke:
-Max.: 600 mm
-Min.: 280 mm
Min. stroke with max. energy: 570 mm
Screw diameter: 480 mm
Table size: 1000x1150 mm
Ram size: 1000x1100 mm
Distance between table and ram:
-Ram up: 1500 mm
-Ram down: 900 mm
Distance below guides: 1300 mm
Distance between guides: 820 mm
Height above floor: 7520 mm
Press weight: 135 tons
 
  42
IDMI7067
MakeHasenclever
ModelFPRN315
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 ton,
Diameter of the screw: 315 mm,
Max force: 1600 mm,
Blow per min: 2
Stroke ram: 475 mm,
Opening in uprights: 750 mm,
Opening between bed/ram: 800 mm,
Power required: 70 KW,
Approx weight: 56 ton
 
  43
IDMI7016
MakeHasenclever
Model
YOM
ConditionExcellent
PhotoSee Photo
Type FPP280/630
Our Order No 64 M327
Serial no 6635
Diameter of screw 11.02''
Nominal Capacity 800 ton
Maximum rated Capacity 1600 ton
Gross Energy 30,240Ft lb 4200m kg
Net Enegry 20.160 ft. lb 2800m kg
Distance Between Upright
below guides 24.80''
between guides 24.02''
Effective table area
width 24.80''
depth 39.37
Stroke of slide 18.70''
Minimum daylight slide down 27.96''
Maximum daylight slide up 46.65''
Maximum Number of Stroke per minute 20/ min
Driving Motor
capacity 75ps
speed 1500u/min
Electric current supply 420 V 50Hz
Air pressure required 73 p.s.i.
Net weight of machine 35,8t
 
  44
IDMA31646
MakeRussian
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Nominal effort kN 4000
Slide stroke, mm 450
The distance between the table and the crosshead, 450 mm
The distance between the table and the crosshead, 450 mm
Main drive power 50 kW
Table size width / length mm 780/880
Machine dimensions Length Width Height (mm) 4400_2360_5500
Weight 30000 kg
 
  45
IDMA31442
MakeFuji Sharyo
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity - 1000 tons
Stroke - 600 mm
SPM - 20
Daylight - 1200 mm
Table - 1000 x 1000 mm
Slide - 850 x 850 mm
Upper Knockout - 3 tons
Stroke - 50 mm
Bottom Knockout - 5 tons
Stroke - 100 mm
 
  46
IDMA31440
MakeWeingarten
ModelPSS225
YOM1970
ConditionGood Condition
PhotoSee Photo
Permissible Force - 8,000 kN
Hard on hard - 10,000 k N
Energy-22.5kNm
Strokes per Minute -30
Screw Diameter -225mm
Max. Stroke-400mm
Min. Stroke-140mm
Distance Between Table & Ram - Ram Up -900mm
- Ram Down-500mm
Distance Between Guides -700mm
Distance Below Guides -830mm
Table Left to Right -680mm
- Front to Back -700mm
Ram Left to Right -630mm
- Front to Back -630mm
Height above Floor -4,800mm
**Equipped With:
**22 kW Motor
 
  47
IDMA31439
MakeWeingarten
ModelPSS225
YOM1984
ConditionGood Condition
PhotoSee Photo
Permissible Force - 8,000 kN
Hard on hard - 10,000 k N
Energy-22.5kNm
Strokes per Minute -30
Screw Diameter -225mm
Max. Stroke-400mm
Min. Stroke-140mm
Distance Between Table & Ram - Ram Up -900mm
- Ram Down-500mm
Distance Between Guides -700mm
Distance Below Guides -830mm
Table Left to Right -680mm
- Front to Back -700mm
Ram Left to Right -630mm
- Front to Back -630mm
Height above Floor -4,800mm
**Equipped With:
**22 kW Motor
 
  48
IDMA31298
MakeStankoimport
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diameter : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, front to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  49
IDMA31264
Make
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diameter : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, front to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  50
IDMA31222
MakeHasenclever
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 800 ton
Screw Diameter : 280 mm
Nominal Force : 8000 kN
Maximum Force : 1800 kN
Gross Energy : 100 kJ
Effective Energy : 85 kJ
Columns Distance : 750 mm
Table Area : 710 x 900 mm
Ram Area : 630 x 900 mm
Ram Stroke : 425 mm
Min Daylight : 1135 mm
SPM : 17
Main Motor : 70 Kw 1500 rpm
Machine Weight : 40 tons
 
  51
IDMA31201
MakeStankoimport
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton
Table 780 x 880 mm
Stroke : 450 mm
Weight : 30 t.
 
  52
IDMI6976
MakeHasenclever
ModelFFP280
YOM
ConditionGood Condition
PhotoSee Photo
Nominal Capacity : 800 tons
Maximum Capacity :1600 Tons
Slide stroke: 18.70 Inch diameter of Screw 11.02 Inch
Slide stroke length at maximum force: 0,16 mm
Distance between Uprights L to R : 24.80 Inch
Slide stroke number in 1 min: 20
Table overall dimensions: 24.80 Inch x39.37 Inch
Daylight level: 27.96 Inch
Driving Motor: 75 PS
Press weight: 35.8 tons
IT IS A DIRECT DRIVE PRESS
 
  53
IDMA31026
MakeWeingarten
ModelPA 160
YOM
ConditionGood Condition
PhotoSee Photo
NOMINAL CAPACITY : 250T
CONTINIOUS LOAD CAPACITY : 400T
CALIBRATION FORCE : 500T
SCREW : 160mm
VARIABLE STROKE : 120-350mm
TABLE : 540x600mm
DAYLIGHT TABLE/RAM
Stroke down-stroke up : 250-600 mm
MOTOR : 10KW
HEIGHT ABOVE FLOOR : 3680 mm
WEIGHT : 7130 KG
 
  54
IDMA30932
MakeDellavia
Model
YOMRetrofitted in 2005
Condition
PhotoSee Photo
250 tons
 
  55
IDMA30918
MakeManzoni
Model
YOM
ConditionGood Condition
PhotoSee Photo
MANZONI SCREW PRESS 250 tons - 175 mm screw
 
  56
IDMA30904
MakeGamei
ModelPHG 400/560
YOMRetrofitted in 2004
ConditionUnder power
PhotoSee Photo
560 TM
TABLE DIMENSIONS 600 X 760 MM.
SPINDLE DIAMETER 230 MM
BETWEEN COLUMNS 760 MM
BETWEEN GUIDES 600 MM
HITS 37/55 MIN.
UNDERPOWER
 
  57
IDMA30900
MakeFuji Sharyo
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity - 1000 tons
Stroke - 600 mm
SPM -20
Daylight - 1200 mm
Table - 1000 x 1000 mm
Slide - 850 x 850 mm
Upper Knockout - 3 tons
Stroke - 50 mm
Bottom Knockout - 5 tons
Stroke - 100 mm
 
  58
IDMA30834
MakeStanko-Russia
ModelF1734A
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 250Tons
Model : F1734A
 
  59
IDMA30768
MakeWeingarten
ModelPS100
YOM
Condition
PhotoSee Photo
Permanently permissible maximum force-100 t, Stroke- 80-250 mm, Diameter of screw- 100 mm, Strokes per min.- 45 - 65 min^-1, Shut height- 600 mm, Table size (left to right- 350 mm, Table size (front to back)- 400 mm, Ram (left to right)- 340 mm, Ram (front to back)- 345 mm, Driving power- 8 kW, Dimensions- 1300 x 900 mm (B x T ), Height of machine above floor- 2800 mm, Distance between the columns (left to right)- 385 mm, Total weight- 2,5 tons, Mode of operation- Mechanical,
 
  60
IDMA30729
MakeWeingarten
ModelPSM4.265
YOM1995
ConditionReconditioned
PhotoSee Photo
Servo Driven Screw Press, Nominal force- 1100 ton, Max admissible force- 1400 ton, Max energy- 65 KNm, Bolster dimensions- 940 x 770 mm, Max opening- 1100 mm, Stroke of the ram- 450 mm, Height from the over table to rails- 550 mm, Cycle time with max stroke- sec. 2.3, Power installed- 65 Kw, Weight approx- 34 tons, Dimensions- 2000 x 1600 x 4900 mm, Window- 380 x 470 mm
 
  61
IDMA30584
MakeHasenclever,Germany
Model
YOM1984
ConditionWorking
PhotoSee Photo
Model : FPRN560
Rated force : 3150 ton
Max. force : 7100 ton
Screw Diameter : 560 mm
Stroke : 850 mm
Table size : width 1270 mm, depth 1700 mm
Number of strokes : 12 9 spm
Main motor capacity : 240 kW
 
  62
IDMA30576
MakeHasenclever,Germany
ModelFPPN180/540/300/750
YOM1972
Condition
PhotoSee Photo
Nominal Force- 315 tons, Stroke- 300 mm, No. of strokes- 36/min, Distance between columns- 540 mm, Distance table/ram Max. stroke up, adjustment up- 750 mm, Table surface area- 530x630 mm, blow die to die- 630 tons, Allowed max force- 500 tons, Ram surface- 450x560 mm, Spindle diameter- 180 mm, Power capacity- 18,0 KW, Weight- 13,0 t, Dimensions ( WXDXH) - 2,5 x 2,0 x 4,0 m,
 
  63
IDMI6892
MakeStankoimport
ModelF1736
YOM
ConditionWorking
PhotoSee Photo  |  See Video
Capacity : 400 ton, Impact energy : 25 kJ, Screw diameter : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, front to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm,newly made ready to use.
 
  64
IDMI6889
MakeRussian
ModelF1734
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
250 tons, With new electrical panel with PLC, new lubrication, new box nut with screw, newly made ready to use.
 
  65
IDMA30451
MakeFuji Sharyo
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 tons,
Stroke : 600 mm,
SPM : 20,
Daylight : 1200 mm,
Table : 1000 x 1000 mm,
Slide : 850 x 850 mm,
Upper Knockout : 3 tons,
Stroke : 50 mm,
Bottom Knockout : 5 tons,
Stroke : 100 mm.
 
  66
IDMI6809
MakeQindgdao Hongda
Model
YOM2015
ConditionGood Condition
PhotoSee Photo
Capacity : 1600 ton,
SPM.....10 no's Per minutes,
Table : 1100 x 1250 mm,
Squrw Dia : 430 mm,
Motor Kw : 90X2 no's,
Shut height : 1000 mm,
Along die caution,
Weight : 108 ton.
 
  67
IDMI6804
MakeLaien Japan Calobration
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1600 ton,
Table: 1100 x 1250 mm,
Squrw dia: 500 mm,
Motor : 100 HP 2 nos
Shut height: 1250 mm,
Along die caution
Weight: 108 ton
 
  68
IDMA30217
MakeStanko-Russia
ModelF1738
YOM1990
ConditionGood Condition
PhotoSee Photo
630 tons, max ram stroke 520 mm, kinetic energy of moving parts at the end of max ram stroke 50 kj , 25 Stroke Per Min , side clearance 800 mm, ram dimensions front to back 800 mm, bed dimensions 900 x 1000 mm, main drive motor power 45 kW, overall dimensions 5200 x 2180 x 6155 mm, mass 45 tons.
 
  69
IDMA30062
MakeStanko-Russia
ModelF1734
YOM
ConditionGood working condition
PhotoSee Photo
Nominal effort: 250 tons
Effective energy not lower: 1250 kgcm
Max. slide stroke: 350 mm
Number of strokes per 1 min max. stroke: 34
Ram size (front-to-back): 530 mm
Table size:
-Right-to-left: 670 mm
-Front-to-back: 750 mm
Min. distance between table and slider (in lower position of slider): 420 mm
Total power requirement: 36 kW
Press dimensions:
-Width: 3710 mm
-Length: 1925 mm
-Height: 4450 mm
Weight: 15500 kg
 
  70
IDMA29644
MakeRussian
ModelF1732
YOM
ConditionGood Condition
PhotoSee Photo
160 tons,kinetic energy of moving parts at the end of maximum ram stroke 12.5 kJ, max. ram stroke 320 mm, no. of strokes/min. 34, shut height 560 mm, ram dimensions front to back 500 mm, bed size 580x650 mm, main motor power 12 kW, 2560x2020x4025 mm, weight 12 ton.
 
  71
IDMA29642
MakeRussian
ModelF1730
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 100 tons, kinetic energy of moving parts at the end of maximum ram stroke 6 kJ,Screw dia 150 mm, max. ram stroke 260 mm, no. of strokes/min. 38, slide clearance 460 mm, ram dimensions front to back 440 mm, bed size 500x560 mm, main motor power 6.5 kW,overall dimensions: 2210 x 1560 x 3375 mm, weight 6.2 tons
 
  72
IDMI6560
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Down stroke press : 300 tons.
 
  73
IDMA29488
MakeNiko (Japan)
Model
YOM1990
ConditionGood Condition
PhotoSee Photo
Capacity: 4000 ton,
Bolster area: 2350 mm (R-L) x 2100 mm (F-B),
Stroke: 600 mm,
Die height: 1390 mm,
Lowering speed: 700 mm/sec,
Interia energy: kg-m: 40,000,
Cycle time: 150 seconds (Pressure block down device),
-Stroke:600 mm
-Rising speed:250 mm/sec
-Lowering speed;60 mm/sec
(Rod float device)
- stroke;40 mm
(Rod shift device)
-Stroke:2500 mm
-Forwarding speed;250 mm
-Back speed: 250 mm/sec
(Rod down device)
-Stroke:100 mm
-Rising speed:100 mm/sec
-Lowering speed:100 mm/sec
(Up pascal clamp)
-Max.1635 mm
-Min. 1553 mm
-Stroke:35 mm
-Forwarding speed:50 mm/sec
-Back speed:50 mm/sec
(Safe block device)
-Stroke:65 mm
-Rock speed: 50 mm/sec
-Un-rock speed:50 mm/sec
(Strip pin device)
-Stroke: 200m m
-Rising speed: 50m m/sec
-Lowering speed:50 mm/sec
(Massage roller)
-Stroke: 200 mm
-Pressing speed: 50 mm/sec
-Drawing speed: 50 mm/sec
(Die lift device)
-Stroke: 3 mm
-Rising speed:50 mm/sec
-Lowering speed: 50 mm/sec
(Product extracting device)
-Stroke: 820 mm
-Rising speed:250 mm
-Lowering speed: 250 mm/sec
(Press dimension)
7510 mm(R-L) x 8860 mm(F-B) x 9680 mm(H)
 
  74
IDMA29246
MakeStanko-Russia
ModelF1736
YOM1983
Conditiongood working condition,complete
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diameter : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, front to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  75
IDMA29101
MakeChemkent ,Russia
ModelF1738
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 650 t,
Dayligth : ca. 450 mm,
Total height : 6700 mm,
Width : 2500 mm,
Depth : 1000 mm,
Mech. forging Press (without ejector)
Total height : 6700 mm,
Into floor : 1000 mm,
Over floor : 5700 mm,
Weight of the machine ca. : 45 t.
 
  76
IDMA28910
MakeStanko-Russia
ModelF1736
YOM1981
ConditionVery good condition
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diameter : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, front to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  77
IDMA28687
MakeWeingarten
ModelPSS480
YOM1978
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 2300 T,
Max. Power : 3600 t,
Dia. of screw : 480 mm,
Stroke : 280-600 mm,
No. of Strokes : 25-35 min^-1,
Shut height : 900-1500 mm,
Table size (left to right) : 1000 mm,
Table size (front to back) : 1150 mm,
Ram (left to right) : 1000 mm,
Ram (front to back) : 1100 mm,
Height of machine above floor : 7520 mm,
Distance between the columns (left to right) : 1100 mm,
Total weight : 165 t.
 
  78
IDMA28622
MakeWeingarten
ModelPA225
YOM2009
ConditionGood Condition
PhotoSee Photo
Pressing force: 800 tons,
Thrower force (additionally for 10% of strokes): 1000 tons,
Spindle diameter: 225 mm,
Max. stroke: 440 mm,
Min. stroke: 230 mm,
Number of strokes: 21
Distance between table and slide: 500 mm,
Width under guides: 800 mm,
Width between guides: 700 mm,
Table width: 810 mm,
Table depth: 700 mm,
Slide width: 680 mm,
Slide depth: 700 mm,
Table opening: 90 mm,
Main motor power: 28 kW,
Fan motor power: 1 kW,
Press height above floor level: 4750 mm,
Press weight: 20 tons.
 
  79
IDMA28607
MakeNational,USA
Model
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Machine Size : 360,
Nominal tonnage : 1300 Tons,
Permissble tonnage : 2100 tons,
Screw diameter : 360 mm,
Height above floor : 6.90 m,
Floor space R to L : 2.74 m,
Floor space F to B : 1.92 m,
Net Weight : 76,000 (167,600) KG/LB.
Electric circuit overhauled 2006.
 
  80
IDMA28509
MakeHasenclever,Germany
ModelFPRN1600
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1600 ton,
Stroke : 600 mm,
Stroke : 18 n/min,
Screw : 400 mm,
Table size : 1080 x 1250 mm,
Ram Size : 880 x 1120 mm,
Shut Height : 1000 mm,
Daylight : 1600 mm,
Light between columns : 1090 mm,
Engine Power : 100 kW,
Dimensions Width x Height x Depth : 4350 x 7900 x 4000 mm,
Total Weight : 95000 kg.
Overhauling project :-
Lubrication system set up Complete nut assembly.
Flywheel clutch disc check up Leather seat check up.
Discs and seals axes control.
Hub and gibs check up.
Hub hook check up.
Balance pistons revamp.
Lower expeller control unit (overhauling needed).
Air system set up.
 
  81
IDMA28378
MakeRussian
ModelF1734A
YOM1990
ConditionGood Condition
PhotoSee Photo
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons.
 
  82
IDMA28286
MakeHasenclever,Germany
Model
YOM1993
ConditionGood Condition
PhotoSee Photo
Capacity: 1250 ton,
Normal capacity:1400 ton,
Maximum capacity: 1600 ton,
Screw diameter: 315 mm,
Stroke: 400 mm,
Bed: 900 mm x 1060 mm,
Slide: 900 mm X 1060 mm
Shut height: 850 mm.
Daylight:1250 mm,
SPM: 24/36
Machine weight: 54 Tons,
Estimated weight: 60 ton.
 
  83
IDMA28273
MakeDellavia
ModelLivorno
YOM1982
ConditionGood working condition
PhotoSee Photo
Diameter screw : 130 mm,
Nominal Power : 280 Ton,
Dimension table : 340 x 460 mm,
Stroke : 270 mm,
Maximum light : 500 mm,
Overall dimension : 1180 x 700 x 3000 mm,
Weight : 4500 kg.
Qty : 2 nos
 
  84
IDMA28267
MakeDellavia
ModelCenisio
YOM1982
ConditionGood working condition
PhotoSee Photo
Diameter screw : 140 mm,
Nominal Power : 120 Ton,
Dimension table : 360 x 470 mm,
Stroke : 320 mm,
Maximum light : 600 mm,
Overall dimension : 1400 x 800 x 3600 mm,
Weight : 5000 kg.
 
  85
IDMA28266
MakeDellavia
ModelCenisio
YOM1982
ConditionGood working condition
PhotoSee Photo
Diameter screw : 140 mm,
Nominal Power : 140 Ton,
Dimension table : 360 x 470 mm,
Stroke : 320 mm,
Maximum light : 650 mm,
Overall dimension : 1350 x 800 x 3700 mm,
Weight : 5000 kg.
 
  86
IDMA28265
MakeDellavia
ModelSaronno
YOM1982
ConditionGood working condition
PhotoSee Photo
Diameter screw : 150 mm,
Nominal Power : 160 Ton,
Maximum force : 320 Ton,
Dimension table : 360 x 480 mm,
Stroke : 360 mm,
Maximum light : 630 mm,
Overall dimension : 1360 x 780 x 3700 mm,
Weight : 5000 kg.
 
  87
IDMA28264
MakeDellavia
ModelBrennero
YOM1982
ConditionGood working condition
PhotoSee Photo
Diameter screw : 170 mm,
Nominal Power : 200 Ton,
Dimension table : 550 x 440 mm,
Dimension ram : 340 x 380 mm,
Stroke : 350 mm,
Maximum light : 670 mm,
Overall dimension : 1500 x 970 x 3900 mm,
Weight : 5000 kg.
 
  88
IDMA28263
MakeDellavia
ModelBrennero
YOM1982
ConditionGood working condition
PhotoSee Photo
Diameter screw : 170 mm,
Nominal Power : 200 Ton,
Dimension table : 440 x 550 mm,
Stroke : 350 mm,
Maximum light : 700 mm,
Overall dimension : 1600 x 950 x 3950 mm,
Weight : 9000 kg.
 
  89
IDMA28262
MakeDellavia
ModelBrindisi
YOM1982
ConditionGood working condition
PhotoSee Photo
Diameter screw : 180 mm,
Nominal Power : 235 Ton,
Maximum force : 470 Ton,
Dimension table : 440 x 550 mm,
Stroke : 400 mm,
Maximum light : 670 mm,
Overall dimension : 1600 x 1000 x 4000 mm,
Weight : 6000 kg.
 
  90
IDMA28261
MakeDellavia
ModelSALERNO-SA5
YOMOverhauled 2004
ConditionVery good condition
PhotoSee Photo
Diameter screw : 250 mm,
Nominal Power : 650 Ton,
Maximum force : 1000 Ton,
Dimension table : 750 x 580 mm,
Dimension ram : 480 x 550 mm,
Stroke : 500 mm,
Maximum force : 1000 Ton,
Maximum light : 630 mm,
Overall dimension : 2815 x 3635 x 4960 mm,
Weight : 25000 kg.
 
  91
IDMA28168
MakeVaccari
ModelPS5
YOM
ConditionGood working condition
PhotoSee Photo
Screw diameter : 100 mm,
Nominal working force : 100 Ton,
Max . Energy allowable for piece : 350 Kgm,
Opening in uprights : 400 mm,
Stroke of the ram : 270 mm,
Stroke per min : 50 / 60 N,
Dimension Height : 3000 mm,
Width : 1500 mm,
Depth : 1300 mm,
Motor required : 5.5 kW,
Weight of the machine : 2800 kg.
With new electrical panel.
 
  92
IDMA28166
MakeOsterwalder
ModelFPN180
YOM
ConditionGood working condition
PhotoSee Photo
Nominal pressure of work : 330 ton,
Diam of the screw : 180 mm,
Max energy available : 21.000 Nm,
Max stroke : 360 mm,
Strokes per min : 40-48 N,
Min opening : 430 mm,
Opening between upright from left to right : 760 mm,
Motor power : 22 Kw,
Diameter : H 4490 mm,
W : 2100 mm,
D : 1300 mm,
Weight about : 13000 Kg.
 
  93
IDMA28163
MakeHydromec
ModelUnused
YOM
ConditionGood working condition
PhotoSee Photo
Nominal capacity 6 mm bottom stroke : 3000 Kn,
Slide stroke : 300 mm,
Strokes per minute : 50-90 N,
Slide adjustment : 75 mm,
Shut height (stroke down, adj. up) : 530 mm,
Bolster dimension : 700 x 700 mm,
Slide dimension : 550 x 550 mm,
Main motor : 27 Kw,
Slide adjustment motor : 1.8 Kw,
Cushion capacity : 500 Kn,
Cushion stroke(adjustable) : 20-70 mm.
Complete with rotary.
Automation and vertical sub-press.
 
  94
IDMA28162
MakeDellavia
ModelLuino
YOM
ConditionGood working condition
PhotoSee Photo
Nominal working force : 150 ton,
Screw diameter : 130 mm,
Max. allowable force for cold pressing : 240 ton,
Stamping limit force : 300 ton,
Max. efficiency : 74 %,
Max. available energy : 400 Kgm,
Opening in uprights : 750 mm,
Min. deforming stroke allowable with maximum force : 1,7 mm,
Opening in uprights : 350 mm,
Opening in guides : 270 mm,
Stroke of the ram : 300 mm,
Distance from the bolster plate to guides : 285 mm,
Overall dimensions :-
Height : 3220 mm,
Depth : 1400 mm,
Width : 1670 mm,
Motor required : 7,5 kW,
Weight of the machine about : 4,2 ton.
 
  95
IDMA28161
MakeDellavia
ModelLecce
YOM
ConditionGood working condition
PhotoSee Photo
Nominal working force : 160 ton,
Diameter of the screw : 130 mm,
Max force allowable : 250 ton
Stamping limit force : 310 ton,
Max.efficiency : 75,5 %,
Max energy available : 550 Kgm,
Opening in uprights : 350 mm,
Minimum deforming stroke allowable with maximum force : 1,7 mm,
Opening in guides : 370 mm,
Stroke of the ram : 300 mm,
Distance from bolster plate to guieds : 250 mm,
Overall dimensions height : 3130 mm,
Depth : 1880 mm,
Width : 1740 mm,
Motor required : 7,5 Kw,
Approx weight : 4,8 ton,
With its existing electric panel.
 
  96
IDMA27906
MakeWeingarten
ModelPA180
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 350 ton,
Distance between upright : 710 mm,
Stroke :- max 380 and min 130 mm,
Stroking rate : 38-60 str/min,
Screw diameter : 180 mm,
Distance table / ram :-
stroke height : 650 mm,
stroke down : 270 mm,
Table : 580 x 620 mm,
Ram : 550 x 560 mm,
Height : 4080 mm.
 
  97
IDMA27905
MakeHiller & Lutz
ModelHYS-K200
YOM
ConditionGood Condition
PhotoSee Photo
Nominal striking force : 350 ton,
Diameter of the screw : 200 mm,
Ram Stroke : 60 to 250 mm,
Table : 700 x 730 mm,
Motor : 30 kW,
Shut Height : 300 mm,
Dimensions :-
Width : 1700 mm,
Depth : 1000 mm,
Height : 3750 mm,
Weight of machine : 21 ton.
 
  98
IDMI6202
MakeQingdao
ModelJ53-400
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Bed size : 730 width x 820 deep,
Motor : 30 KW,
No. of strokes : 14 SPM,
Approximate weight : 15 Ton.
 
  99
IDMI6201
MakePortugal
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Weight : 16 ton.
 
  100
IDMA27818
MakeVaccari
Model10PS
YOM
Conditioncompletely overhauled
PhotoSee Photo
Nominal force : 600 ton,
Diameter of screw : 250 mm,
Opening in uprights : 650 mm,
Distance from bolster plate guides : 410 mm,
Stroke of the ram : 450 mm,
Stroke per minute : 25,
Overall dimension : 5350 x 3000 x 2900 mm.
With hydraulic ejector bottom and top.
 
  101
IDMA27793
MakeVaccari
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Stroke: 400 mm,
Max power: 760 ton,
Table: 515 x 640 mm,
35-45 strokes/min
Including Lcher oven + auto loading system
Dimensions: 2500 x 2400 x 4475 mm
Ideal for forging pieces in one single blow
 
  102
IDMA27778
MakeWeingarten
ModelPZ220
YOMRevised in 1998
ConditionGood working condition
PhotoSee Photo
Capacity : 400 Ton,
Distance between uprights : 800 mm,
Stroke : 400 mm,
Stroke per min : 24-36 str/min,
Power : 40 HP,
Height : 3200 mm,
Weight : 17 T.
Feeder arm.
 
  103
IDMA27681
MakeDellavia
ModelFirenze
YOM1995
ConditionGood working condition
PhotoSee Photo
Capacity: 250 ton,
Diameter of the screw: 150 mm,
Max. force allowable; 400 ton,
Max. energy: 1100 Kgm,
Opening in uprights: 650 mm,
Opening between the guides: 610 mm,
Distance bolster plate guides: 400 mm,
Dimensions of the table width-depth: 600 x 600 mm,
Stroke of the ram: 320 mm,
Stroke per minute: 50,
Motor power: 15 kW,
Weight of the machine approx: 8500 Kg.
With new electrical panel
 
  104
IDMI6159
MakeRussian
ModelF1738
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
630 tons, max ram stroke 520 mm, kinetic energy of moving parts at the end of max ram stroke 50 kj , 25 Stroke Per Min , side clearance 800 mm, ram dimensions front to back 800 mm, bed dimensions 900 x 1000 mm, main drive motor power 45 kW, overall dimensions 5200 x 2180 x 6155 mm, mass 45 tons.
 
  105
IDMA27501
MakeWolff
ModelRSP1000
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1500 ton,
Stroke: 450 mm,
Diameter of screw: 380 mm,
Table size (left to right): 700 mm,
Table size (front to back): 800 mm,
Ram (let to right): 600 mm,
Ram (front to back) : 750 mm,
Driving power: 90 kW,
Total weight: 45 ton
 
  106
IDMA27383
MakeDellavia
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 480 ton,
Screw dia : 210 mm,
Ram stroke : 400 mm.
 
  107
IDMA27029
MakeWeingarten
ModelP200
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke mini/Maxi : 130/400 mm,
Distance Table/Ram : Stroke down : 300 mm,
Stroke up : 700 mm,
Stroking rate with maxi stroke : 20 str./min,
Stroking rate with mini stroke : 30 str./min,
Diameter of screw : 200 mm,
Table area : 650 x 650 mm,
Central hole in the ram : Dia : 50 mm,
Depth : 85 mm,
Width between uprights : 700 mm,
Width between guides : 610 mm,
Motor : 25 kW,
Dimensions of the press
Height : 4360 mm,
width : 1400 mm,
Depth : 1200 mm,
Weight : ar. 11 tons,
Servo motor is not available.
 
  108
IDMA27014
MakeVaccari
Model8PS
YOM
ConditionGood working condition
PhotoSee Photo
Nominal pressure of stroke : 300 ton,
Diameter of screw : 180 mm,
Theoretical pressure : 550 ton,
Max. useful energy transmissible to piece to press : 1580 kgm,
Min tolerable deformation at nominal pressure : 5 mm,
Port between uprights beneath slide guides : 450 mm,
Port between uprights beneath slide guides : 350 mm,
Stroke of the ram : 350 mm,
max. height from table to ram : 650 mm,
Height from table below slide guides: 300mm,
Dimensions of the table :
Width : 430 mm,
Depth : 550 mm,
Overall dimension :
Height : 4100 mm,
Width 2600 mm,
Depth : 2200 mm,
Blow per min : 35 n,
Power : 30 hp,
Approx weight : 1100 kg
 
  109
IDMA27013
MakeWeingarten
ModelPAR180
YOM1993
ConditionGood working condition
PhotoSee Photo
Nominal working force : 315 tons,
Screw diameter : 180 mm,
Max useful energy : 630 ton,
Opening in uprights : 710 mm,
Stroke of the ram : 380 mm(max.),200 mm(min),
Stroke per minute : 38 n,
Table dimension : 620 x 700 mm,
Ram dimension : 640 x 350 mm,
Shut height : 560 mm,
Approx weight : 12000 kg.
Servo motor is available.
 
  110
IDMA26904
MakeDelavia
Model
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Capacity : 1300 ton,
Theorical capacity : 2300 t,
Max Stroke : 550 mm,
Screw dia : 350 mm,
Shut height : 1550 mm,
Motor : 110 kW,
Weight of machine : 80 tons
 
  111
IDMA26737
MakeEumuco,Germany
ModelPF800
YOM
ConditionGood Condition
PhotoSee Photo
Permanently permissible maximum force : 1000 t,
Stroke : 355 and 180 mm,
Shut height : 600 mm,
Strokes min^-1 : 30 min^-1,
Table size (left to right) : 630 mm,
Table size (front to back) : 920 mm,
Ram (left to right) : 630 mm,
Ram (front to back) : 630 mm,
Upper ejector power : 8 t,
Upper ejector stroke : 60 mm,
Driving power : 45 kW,
Height of machine above floor : 5200 mm,
Distance between the columns : 640 mm,
Weight : 38 t.
 
  112
IDMA26735
MakeBerrenberg
ModelRSSP250/630
YOM
ConditionGood Condition
PhotoSee Photo
Permanently permissible maximum force : 900 t,
Maximal pressing power : 1250 t,
Stroke : 355 mm,
Diameter of screw : 250 mm,
Strokes min^-1,
Shut height : 855 mm,
Table size (left to right) : 630 mm
Table size (front to back) : 920 mm,
Ram (left to right) : 630 mm,
Ram (front to back) : 630 mm,
Driving power : 37 kW,
Height of machine above floor : 4800 mm,
Distance between the columns (left to right) : 630 mm,
Total weight : 28 t.
 
  113
IDMA26734
MakeSiempelkamp,Germany
ModelNPS630/750/335
YOM
ConditionGood Condition
PhotoSee Photo
Permanently permissible maximum force : 800 t,
Screw diameter : 225 mm
Stroke : 335 mm,
Shut height : 560 mm,
Table size (left to right) : 750 mm,
Table size (front to back) : 900 mm,
Table height above floor : 630 mm,
Ram (left to right) : 675 mm,
Ram (front to back) : 900 mm,
Ram speed : 500 mm/s,
Driving power : 30 kW,
Height of machine above floor : 4100 mm,
Total weight : 25 t.
 
  114
IDMA26732
MakeHasenclever,Germany
ModelFPRN224/500/335/895
YOM
ConditionGood Condition
PhotoSee Photo
Permanently permissible maximum force : 800 t,
Stroke : 335 mm,
Diameter of screw : 224 mm,
Distance between the columns (left to right) : 500 mm,
Shut height : 500 mm,
Strokes min^-1 : 32 min^-1,
Table size (left to right) : 500 mm,
Table size (front to back) : 710 mm,
Ram (left to right) : 485 mm,
Ram (front to back) : 710 mm,
Driving power : 36 kW.
 
  115
IDMA26374
MakeRussian
ModelF1734A
YOM1989
ConditionExcellent ,unused
PhotoSee Photo
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons.
 
  116
IDMA25959
MakeVaccari
Model10NS
YOM1984
Conditiongood mechanical condition
PhotoSee Photo
Nominal striking force : 530 ton,
Theoritical pressure : 1000 ton,
Max transmissible energy : 3600 kg.m,
Diameter of the screw : 230 mm,
Distance between uprights : 570 mm,
Ram Stroke : 430 mm,
Stroking rate : 30/42 str/min,
Distance table / TDC : 830 mm,
Distance table / LDC : 400 mm,
Table width : 565 mm,
Table depth : 700 mm,
Motor : 50 HP,
Dimensions :-
Width : 2700 mm,
Depth : 2550 mm,
Height : 5150 mm,
Approx Weight : 22 t.
Hydraulic low ejector.
 
  117
IDMA25930
MakeNippon Japan
Model
YOM1973
ConditionGood Condition
PhotoSee Photo
Diameter of the screw : 700 mm,
Maximum normal applied power : 6000 t,
Flywheel energy : 70 m.ton,
Max size of dies used : 1200 x 1800 mm,
Ram size : 1700 x 1800 x 1600 mm,
Die height (up and down matrix together) : min 600, max 970 mm,
Maximum ram stroke : max 1200, normal 800 mm,
Speed of ram lower surface : 0-0.43 m/sec,
Stroke (continuous) : 4,
Number of linear motors on top of the frame : 6,
Linear motor type : TLM-15,
Machine frame size : 4000 x 5000 x 10000 mm (this is not the total size of machine),
Knock out device power : 100 t (4 hydraulic cylinders),
Machine weight : 397 t.
Other parameters,
Power consumption :-
Power source : AC 6600V, 60Hz, working power : 220V, 60 Hz,
Linear motor volume : 475kVA (6 units),
Ram balancer : 11 kW,
Overload protector 15 kW for low pressure pump, 1.5 kW for high pressure pump,
Knock out device : 55 kW,
Air cooler device (cooler fan) : 125 kW,
Lubricant supply device : 1.5 kW,
Grease supply device : 0.4 kW.
 
  118
IDMA25841
MakeRussian
ModelF1734A
YOM
ConditionComplete ,good working condition
PhotoSee Photo
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons, Quantity : 2 nos.
 
  119
IDMA25821
MakeRussian
ModelF1732
YOM1976
ConditionGood Condition
PhotoSee Photo
160 tons,kinetic energy of moving parts at the end of maximum ram stroke 12.5 kJ, max. ram stroke 320 mm, no. of strokes/min. 34, shut height 560 mm, ram dimensions front to back 500 mm, bed size 580x650 mm, main motor power 12 kW, 2560x2020x4025 mm, weight 12 ton.
 
  120
IDMA25195
MakeFicep
ModelPFS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 ton - 2 nos.
 
  121
IDMA24958
MakeDellavia
ModelTarvisio
YOM
ConditionBrand New
PhotoSee Photo
Power : 1250 ton,
Screw diameter : 330 mm,
Ram stroke : 500 mm,
Stroke per minute : max 29,
Passage between shoulders : 750 mm,
Motor power : 75 HP,
Power : 1900 ton,
Distance plane / guide : 500 mm,
Electrical control SIEMENS.
 
  122
IDMA23943
MakeStanko-Russia
ModelFB1732
YOM1978
ConditionGood Condition
PhotoSee Photo
Max pressure : 160 ton,
Slide stroke : 320 mm,
No of strokes per 1 minute : 36,
Table dimensions : 580 x 650 mm,
Dimensions : 2600 x 1150 x 3820 mm,
Press weight : 12 ton.
 
  123
IDMA23940
MakeBerrenberg
ModelRSPP200/400
YOM1975
ConditionGood Condition
PhotoSee Photo
Max pressure : 400 ton,
Screw diameter : 200 mm,
Rom stroke : 280 mm,
Table area : 750 x 560 mm,
Distance between columns : 560 mm,
Max climbing : 225 mm,
Shut height : 680 mm,
Required height when die is closed : 400 mm,
Max strokes per 1 min : 60,
Motor power : 37 kW,
Dimensions : 2100 x 2100 x 4000 mm,
Press weight : 15 ton.
Quantity: 2 nos
 
  124
IDMA23899
MakeChinese
ModelJ53-300B
YOM
ConditionBrand New
PhotoSee Photo
300 tons , energy 20 kJ , slide stroke 400 mm , 15 Stroke Per Min , minimum shut height 300 mm , dimension of work table 650 x 570 mm , overall dimensions 1603 x 2581 x 4345 mm , main motor power 22 kW , total weight 13920 kg.
 
  125
IDMA23774
MakeLasco
ModelSKP2500
YOM
ConditionGood Condition
PhotoSee Photo
2500T,
Max. Power 4000t,
Hard blow force 5000t,
Dia. of screw 425 mm,
Stroke 600 mm,
Shut height 2600 mm,
Table size (left to right)1720 mm,
Table size (front to back) 1800 mm,
Ram (left to right) 2100 mm,
Ram (front to back) 1320 mm,
Upper ejector power 40t,
Upeer ejector stroke 250 mm,
Driving power 900 kw,
Dimensions 3400 x 4600 x 9700 mm,
Height of machine above floor 8200 mm,
distance between the columns 1720 mm,
Total weight 335t,
Mode of operation - Mechanical.
 
  126
IDMA23771
MakeHasenclever,Germany
ModelHSPR450/1000/600
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3000 ton,
Stroke : 600 mm,
Table size (left to right) : 1000 mm,
Table size (front to back) : 1200 mm,
Ram (left to right) : 950 mm,
Ram (front to back) : 1250 mm,
Spindle diameter : 450 mm,
Strokes : 9 min^-1,
Shut height : 800 mm,
Driving power : 110 kW,
Dimensions (l x b x h): 2000 x 2950 x 6770 mm
Total weight : 86 t.
 
  127
IDMA22904
MakeChinese
ModelJ54-1600C
YOMBrand New
ConditionBrand New
PhotoSee Photo
1600 tons , max force 25000 kJ, ram stroke 700 mm, times of stroke 10/min , min shut height 750 mm, height of bolster 200 mm, dimension of working table 1250 x 1100 mm, overall size 4500 x 5742 x 8090 mm, main motor power 132 kW, weight 112 tons.
 
  128
IDMA22903
MakeChinese
ModelJ54-1000C
YOMBrand New
ConditionBrand New
PhotoSee Photo
1000 tons , max force 16000 kJ, ram stroke 700 mm, times of stroke 10/min , min shut height 700 mm, height of bolster 200 mm, dimension of working table 1200 x 1000 mm, overall size 5355 x 4900 x 7290 mm, main motor power 90 kW, weight 83 tons.
 
  129
IDMA22355
MakeWeingarten
ModelPSM4.265
YOM1995
ConditionVery good condition
PhotoSee Photo
Nominal force : 1100 ton,
Screw diameter : 265 mm,
Max admissible force : 1400 ton,
Max energy : 65 Knm,
Bolster dimensions : 940 x 770 mm,
Apertura max : 1100 mm,
Stroke of the ram : 450 mm,
Altezza dal soprapiano alle guide : 550 mm,
Cycle time with max stroke : 2.3 sec,
Power installed : 65 Kw,
Dimensions : 2000 x 1600 x 4900 mm,
Window : 380 x 470 mm,
Weight approx : 34 ton.
 
  130
IDMA21625
MakeRussian
ModelF1736A
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diametr : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, fron to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  131
IDMA21624
MakeRussian
ModelF1734A
YOM
ConditionGood Condition
PhotoSee Photo
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons
 
  132
IDMA20223
MakeRussian
ModelF1736
YOM1981
ConditionGood working condition
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diametr : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, fron to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  133
IDMA19960
MakeRussian
ModelF1734A
YOM1991
ConditionGood working condition
PhotoSee Photo
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons
 
  134
IDMA19956
MakeKomatsu
Model
YOM1982
ConditionGood Condition
PhotoSee Photo
Capacity - 630 tons, Stroke - 270 mm, Die Height - 606 mm, Bolster - 1350 x 850 mm.
 
  135
IDMA19704
MakeRussian
ModelF1734A
YOM1981
ConditionGood working condition
PhotoSee Photo
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons
 
  136
IDMA19691
MakeDellavia
ModelPordoi
YOM
ConditionGood Condition
PhotoSee Photo
Screw dia. : 400 mm,
Power : 1600 ton,
Ram stroke : 550 mm,
Strokes for minute : 18 rpm,
Table : 1300 x 900 mm,
Distance between table RAM : 900 mm,
 
  137
IDMA19092
MakeBarnaul Russia
ModelF1740
YOM1982
ConditionVery good condition
PhotoSee Photo
Nominal pressing force - 1000 ton,
Size of a table - 1050 x 1200 mm.
Course of slider - 580 mm.
Slider strokes per minute - 20,
strokes 620 mm,
Daylight 500 mm,
Total power requirement 150kw,
Dimensions 3910 x 3150 x 6690 mm,
Weight - 68 ton.
 
  138
IDMA19089
MakeChemkent ,Russia
ModelF1736
YOM1984
ConditionComplete,very good condition
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diametr : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, fron to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  139
IDMA19086
MakeChemkent ,Russia
ModelF1738
YOM1985
ConditionComplete,very good condition
PhotoSee Photo
Nominal pressing force - 630 tons, Size of a table - 900 x 1000 mm,
Course of slider - 520 mm, Slider strokes per minute - 25, Weight - 54000 kg.
 
  140
IDMA19069
MakeRussian
ModelF1730
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity : 100 tons, kinetic energy of moving parts at the end of maximum ram stroke 6 kJ,Screw dia 150 mm, max. ram stroke 260 mm, no. of strokes/min. 38, slide clearance 460 mm, ram dimensions front to back 440 mm, bed size 500x560 mm, main motor power 6.5 kW,overall dimensions: 2210 x 1560 x 3375 mm, weight 6.2 tons
 
  141
IDMA18927
MakeChinese
ModelJ53-1000C
YOM
ConditionBrand New
PhotoSee Photo
Nominal Force 10000 KN,
Energy : 160 KJ,
Stroke of slide 700 mm,
Times if stroke 10 min-1,
Min. Shut height 700 mm,
Height of bolster 200 mm,
Dimension of working table :
Front/back 1200 mm,
Left/right 1000 mm,
Overall size:
Front/back 5355 mm,
Left/right 4900 mm,
Height 7290 mm,
Main Motor Power 90 KW,
Weight 85000Kg.
 
  142
IDMA18926
MakeChinese
Model
YOM
ConditionBrand New
PhotoSee Photo
Nominal Force 6300 KN,
Energy : 80 KJ,
Stroke of slide 600 mm,
Times if stroke 11 min-1,
Min. Shut height 650 mm,
Height of bolster 180 mm,
Dimension of working table :
Front/back 920 mm,
Left/right 820 mm,
Overall size:
Front/back 3800 mm,
Left/right 4240 mm,
Height 6035 mm,
Main Motor Power 55 KW,
Weight 45000Kg.
 
  143
IDMA18925
MakeChinese
Model
YOM
ConditionBrand New
PhotoSee Photo
Nominal Force 1000 KN,
Energy : 5 KJ,
Stroke of slide 310 mm,
Times if stroke 19 min-1,
Min. Shut height 320 mm,
Height of bolster 100 mm,
Dimension of working table :
Front/back 500 mm,
Left/right 450 mm,
Overall size:
Front/back 1393 mm,
Left/right 1884 mm,
Height 3375 mm,
Main Motor Power 7.5 KW,
Weight 5780Kg.
 
  144
IDMA18924
MakeChinese
Model
YOM
ConditionBrand New
PhotoSee Photo
Nominal Force 4000 KN,
Energy : 40 KJ,
Stroke of slide 500 mm,
Times if stroke 14 min-1,
Min. Shut height 520 mm,
Height of bolster 120 mm,
Dimension of working table :
Front/back 820 mm,
Left/right 730 mm,
Overall size:
Front/back 3200 mm,
Left/right 2812 mm,
Height 5065 mm,
Main Motor Power 30 KW,
Weight 22000Kg.
 
  145
IDMA18729
MakeRussian
ModelF1738
YOM1986
ConditionExcellent
PhotoSee Photo
630 tons capacity, kinetic energy of moving parts at the end of max ram stroke 50 kj , max ram stroke 520 mm, 25 SPM , side clearance 800 mm, ram dimensions front to back 800 mm, bed dimensions 900 x 1000 mm, main drive motor power 45 kW, overall dimensions 5200 x 2180 x 6155 mm, mass 45 tons.
 
  146
IDMA18646
MakeChinese
ModelJ53-400D
YOMBrand New
ConditionBrand New
PhotoSee Photo
Nominal Capacity : 400 ton,
Energy 40kj,
Ram Stroke 500mm,
No. of stroke 14min-1,
Distance between guide wav
650mm,
Ram Dimension 636mm636mm,
Table Dimension 730mm820mm,
die height 400mm,
Thickness of Table 120mm,
Main motor power 30kw.Die holder and die cast at extra cost of USD 15000.
 
  147
IDMA18493
MakeBerrenberg
ModelRSSP200/400
YOM
ConditionGood Condition
PhotoSee Photo
Pressing power : 400 t,
Maximal pressing power : 600 t,
Rebounding power : 800 t,
Stroke 280 mm,
Diameter of screw : 200 mm,
Strokes min^-1 : 56 min^-1
Shut height : 680 mm,
Table size (left to right) : 560 mm,
Table size (front to back) : 750 mm,
Ram (left to right) : 560 mm
Ram (front to back) : 560 mm,
Driving power : 37 kW,
Height of machine above floor : 4000 mm,
Distance between the columns (left to right) : 560 mm,
Total weight : 12 t.
Mode of operation : mechanical.
Qty: 2 Nos.
 
  148
IDMA18150
MakeRussian
ModelF1736
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diametr : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, fron to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm.
 
  149
IDMA17906
MakeEnomoto
Model90BF-OBSN
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity : 90 Tons, Bed Size : 300 x 500 mm, Stroke : 130 mm.
 
  150
IDMA17095
MakeZdas
ModelLVH2500B
YOM1972
ConditionExcellent
PhotoSee Photo
2500 tons , spindle/screw dia 500 mm, max energy of flywheel 35 mgm , distance between casing 1090 mm, distance above casing 1120 mm, max stroke 500 mm, max number of strokes 20/min , liquid pressure 160 atm , max speed of ram 1m/sec , distance between table and ram 1210 mm, distance between table and ram 710 mm, fastening surface of a table 1400 x 1090 mm, fastebning surface of a ram 1040 x 1000 mm, dimensions 3740 x 2960 x 3160 mm, total weight 110.6 tons.
 
  151
IDMA16971
MakeRussian
ModelFB1732
YOM1990
Conditionexcellent working condition
PhotoSee Photo
160 tons,kinetic energy of moving parts at the end of maximum ram stroke 12.5 kJ, max. ram stroke 320 mm, no. of strokes/min. 34, shut height 560 mm, ram dimensions front to back 500 mm, bed size 580x650 mm, main motor power 12 kW, 2560x2020x4025 mm, weight 12 tons - 2 pcs.
 
  152
IDMA16910
MakeRussian
ModelF1738
YOM1991
Conditionexcellent working condition
PhotoSee Photo
630 tons , kinetic energy of moving parts at the end of max ram stroke 50 kj , max ram stroke 520 mm, 25 SPM , side clearance 800 mm, ram dimensions front to back 800 mm, bed dimensions 900 x 1000 mm, main drive motor power 45 kW, overall dimensions 5200 x 2180 x 6155 mm, mass 45 tons.
 
  153
IDMA16909
MakeRussian
ModelF1736
YOM1984
Conditionexcellent working condition
PhotoSee Photo
Nominal effort : 400 tons,
Max slide stroke : 450 mm,
No of strokes per 1 min max stroke : 30,
Table size :
Right-to-left : 780 mm,
Fron-to-back : 880 mm,
Total power requirement : 50 kW,
Press dimensions :
Width : 4400 mm,
Length : 2360 mm,
Height : 5500 mm,
Weight : 30000 Kg.
 
  154
IDMA16295
MakeWeingarten
ModelPSS400
YOM1978
ConditionGood Condition
PhotoSee Photo
nominal force 1600 tons, max. load on this type of press capacity 2600 tons, no. of strokes/min 24-40, practical strokes/min. 15, screw dia. 400 mm, max. ram stroke 600 mm, min. ram stroke 30 mm, distance between table and ram - ram upper position 1520 mm & lower position 920 mm, distance between table & ram 790 mm, disance between cloumns under ram slides 1200 mm & between ram slides 1030 mm, table size 1000x1050 mm, ram stroke 1000x950 mm, motor power 100 kW, compressed air consumption for each stroke 3-5 bars at 4,5 dm3, height from floor 7100 mm, weight of press 95 tons, hydraulic ejector in table 25 tons capacity with 200 mm stroke at 60 mm/sec speed; hydraulic ejector in ram 8 tons capacity with 50 mm stroke at 60 mm/sec speed.
 
  155
IDMA15700
MakeRussian
ModelF1738
YOM1992
ConditionExcellent condition,almost new
PhotoSee Photo
630 tons , kinetic energy of moving parts at the end of max ram stroke 50 kj , max ram stroke 520 mm, 25 SPM , side clearance 800 mm, ram dimensions front to back 800 mm, bed dimensions 900 x 1000 mm, main drive motor power 45 kW, overall dimensions 5200 x 2180 x 6155 mm, mass 45 tons.
 
  156
IDMA15512
MakeRussian
ModelF1734A
YOM1987
ConditionExcellent condition,almost new
PhotoSee Photo
250 tons, ram stroke 400 mm, no. of strokes 30 per min., table size 750 x 670 mm, distance between columns 560 mm,dimensions: 2290 x 2910 x 5050 mm, height above floor level 4930 mm, weight 17 tons
 
  157
IDMA15287
MakeChinese
ModelJ53-6300
YOM
ConditionBrand New
PhotoSee Photo
Nominal Capacity 63000 kN, Energy 1000 KJ, Slide Stroke 800 mm, Strike per minute 9, Space for installing Die 800 mm, Bed Dimension front to back 2200 mm and left to right 1300 mm, Dimensions- Length 7400 mm, Width 5800 mm, Height 9200 mm, Main motor power 185x2 kW, Weight 420 tons
 
  158
IDMA14570
MakeWeingarten
ModelPSS480
YOM
ConditionGood Condition
PhotoSee Photo
2300 tons , admissable capacity at permanent run 3200 tons , max capacity 4600 tons , number of strokes of slide depending of slide strokes : theoretical 23-35 /min , practical 15 /min , spindle dia 480 mm , slide stroke : max 600 mm , min 280 mm , slide stroke according to max shock force 570 mm , dimensions between table and slide : slide below 900 mm , slide above 1500 mm , bearing distance between frame 1300 mm , bearing distance between guidance 1100 mm , table working area 1000 x 1150 mm , dia of opening of table 140 mm , working area of slide 1000 x 1100 mm , hydraulic ejector on table : force of ejector 25 tons , stroke of ejector 200 mm , main drive motor power 140 kW , rotations 136/min , consumption of air pressure at one stroke and air pressure of 4 bar 15 dm3 , height above floor level 7520 mm , net weight 135 tons.
 
  159
IDMA14443
MakeRussian
ModelF1736A
YOM1991
ConditionNew in pack,not used and install
PhotoSee Photo
Capacity : 400 ton, Impact energy : 25 kJ, Screw diametr : 250 mm, Ram stroke : 450 mm, Ram stroke per Min : 30, Ram dimension, fron to back : 630 mm, Slide clearance : 670 mm, Bed : 775 x 875 mm, Main drive motor power : 25 kW, Press dimensions :- Floor space : 4425 x 1790 mm, Height above floor level : 5560 mm
 
  160
IDMA14040
MakeChinese
ModelJ53-4000
YOMBrand New
ConditionBrand New
PhotoSee Photo
4000 tons , energy 850 kJ , slide stroke 800 mm , 9 SPM , space for installing die 800 mm , bed dimension 1900 x 1110 mm , bottom of slide 2000 x 1300 mm , overall dimensions 7200 x 5600 x 9000 mm , main motor power 185 x 2 kW , total weight 380 tons.
 
  161
IDMA14039
MakeChinese
ModelJ53-3150A
YOMBrand New
ConditionBrand New
PhotoSee Photo
3150 tons , energy 700 kJ , slide stroke 800 mm , 9 SPM , space for installing die 800 mm , bed dimension 1900 x 1110 mm , bottom of slide 2000 x 1300 mm , overall dimensions 7000 x 5400 x 8960 mm , main motor power 160 x 2 kW , total weight 350 tons.
 
  162
IDMA14038
MakeChinese
ModelJ53-2500C
YOMBrand New
ConditionBrand New
PhotoSee Photo
2500 tons , energy 500 kJ , slide stroke 800 mm , 9 SPM , space for installing die 680 mm , bed dimension 1560 x 1200 mm , bottom of slide 1560 x 1060 mm , overall dimensions 5360 x 7000 x 8190 mm , main motor power 110 x 2 kW , total weight 219 tons.
 
  163
IDMA14037
MakeChinese
ModelJ53-1600C
YOMBrand New
ConditionBrand New
PhotoSee Photo
1600 tons , energy 280 kJ , slide stroke 700 mm , 10 SPM , space for installing die 550 mm , bed dimension 1250 x 1100 mm , bottom of slide 1000 x 900 mm , overall dimensions 4700 x 6120 x 8090 mm , main motor power 132 kW , total weight 116.836 tons.
 
  164
IDMA14036
MakeChinese
ModelJ53-630B
YOMBrand New
ConditionBrand New
PhotoSee Photo
630 tons , energy 80 kJ , slide stroke 600 mm , 11 SPM , space for installing die 470 mm , bed dimension 920 x 820 mm , bottom of slide 760 x 700 mm , overall dimensions 4694 x 4320 x 6060 mm , main motor power 55 kW , total weight 51.65 tons.
 
  165
IDMA14035
MakeChinese
ModelJ53-400D
YOMBrand New
ConditionBrand New
PhotoSee Photo
400 tons , energy 40 kJ , slide stroke 500 mm , 14 SPM , space for installing die 400 mm , bed dimension 820 x 730 mm , bottom of slide 636 x 636 mm , overall dimensions 3200 x 2812 x 5165 mm , main motor power 30 kW , total weight 23.735 tons.
 
  166
IDMA14033
MakeChinese
ModelJ53-160C
YOMBrand New
ConditionBrand New
PhotoSee Photo
160 tons , energy 10 kJ , slide stroke 360 mm , 17 SPM , space for installing die 260 mm , bed dimension 560 x 510 mm , bottom of slide 440 x 444 mm , overall dimensions 1465 x 2240 x 3730 mm , main motor power 11 kW , total weight 13.41 tons.
 
  167
IDMA14032
MakeChinese
ModelJ53-100B
YOMBrand New
ConditionBrand New
PhotoSee Photo
100 tons , energy 5 kJ , slide stroke 310 mm , 19 SPM , space for installing die 220 mm , bed dimension 500 x 450 mm , bottom of slide 390 x 280 mm , overall dimensions 1393 x 1884 x 3375 mm , main motor power 7.5 kW , total weight 5.78 tons.
 
  168
IDMA14031
MakeChinese
ModelJA53-63
YOMBrand New
ConditionBrand New
PhotoSee Photo
63 tons , energy 2.25 kJ , slide stroke 200 mm , 35 SPM , space for installing die 235 mm , bed dimension 315 x 270 mm , bottom of slide 275 x 227 mm , overall dimensions 1010 x 1141 x 2655 mm , main motor power 5.5 kW , total weight 3.572 tons.
 
  169
IDMA11529
MakeWeingarten
ModelPSS480
YOM1979
ConditionGood Condition
PhotoSee Photo
2300 tons , admissable capacity at permanent run 3200 tons , max capacity 4600 tons , number of strokes of slide depending of slide strokes : theoretical 23-35 /min , practical 15 /min , spindle dia 480 mm , slide stroke : max 600 mm , min 280 mm , slide stroke according to max shock force 570 mm , dimensions between table and slide : slide below 900 mm , slide above 1500 mm , bearing distance between frame 1300 mm , bearing distance between guidance 1100 mm , table working area 1000 x 1150 mm , dia of opening of table 140 mm , working area of slide 1000 x 1100 mm , hydraulic ejector on table : force of ejector 25 tons , stroke of ejector 200 mm , main drive motor power 140 kW , rotations 136/min , consumption of air pressure at one stroke and air pressure of 4 bar 15 dm3 , height above floor level 7520 mm , net weight 135 tons.
top