Category : Gear Machines

Sub-Category : Gear Generator

Total Machines Found : 4

Select | Machine Details
 
  1
IDMA34180
MakeGleason USA
Model24
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:
Longest cone distance (1 3/4′′ stroke) 18′′ (457mm)
Shortest cone distance 0
Max. pitch diameter 10 to 1 ratio 35.5′′
Max. pitch diameter 2 to 1 ratio 31.75′′
Max. pitch diameter 1 to 1 ratio 25′′
Min. pitch angle 5.42 degrees
Extreme ratio 10 to 1
Max. pitch 1.25 DP (20.4 module)
Max. pitch angle (shafts at 90 degrees) 84.18 degrees
Max. face length 6′′ (152mm)
Index range 10-100 inclusive and most numbers up to 200
Work Spindle Bore:
Diameter (large end of taper) 6′′
Taper per foot .75′′
Depth of taper 6′′
Diameter of thru bore 5′′
Spindle nose to machine center 5′′-26′′
Cutter speeds (strokes per minute) 22-170
Feeds (seconds per tooth) (22 feeds) 23-645
Complete With:
Change Gears
Index, Feed, Pitch, and Original Setting Gauges.
12 Machine Cutters
24 Machine Cutters (V-Tan)
 
  2
IDMA32403
Make
Model5C26B
YOM1990
ConditionGood Condition
PhotoSee Photo
There are 2 such machine.
Set of change gears is only one for 2 machines.
Workpiece's diameter - 320mm
Modul - 6
Gear width - 50mm
Spindle rotations - 30..200rpm
Dimensions - 2940x2090x2050mm
Weight - 9000kg
 
  3
IDMA31083
MakeSYKES Herringbone
Model5E
YOM1974
ConditionGood working condition
PhotoSee Photo
Min. : 1.6 Mod
Max. : 17 Mod
Helix angle range : 0 - 45
Work spindle bore : 250 mm
Tailstock to face of work spindle - max. : 1219 mm
Blank diameter:
Max. : 1600 mm
Min. : 0
Face width, double helical : 0 - 457 mm
Face width, spur or single helical : 0 - 254 mm
SPEEDS & FEEDS:
Cutting speeds, number 8
Cutting speeds, stroke per min. : 15 - 120
Feeds, number 4
Feed range, with 6 cutter 0.3 - 0.84 mm
MOTORS:
Main motor 7.5 KW
Saddle traverse motor 1 HP 0.75 KW
Coolant pump motor 0.75 HP 0.56 KW
APPROXIMATE WEIGHT 18,940 kg
Complete with:
Outer cutter heads.
Left & right-hand helical guides fitted.
Tailstock with center and with support
Various change gears.
Electrics 220 volt, 3 ph, 50 hz.
METRIC machine.
 
  4
IDMA18383
MakeSunderland
ModelG250dh
YOM1991
ConditionVery good condition
PhotoSee Photo
Max. outside gear dia. : 2590 mm,
Min. inside gear dia. : 216 mm,
max. width of teeth : 510 mm,
Max. modul : 18,
Helical angle : 30 deg.,
8 cutting speeds from 7 to 31 strokes/min,
4 cutting feed rates,
Max. spindle bore 310 mm,
Max. length of job : 1040 mm,
Main motor power 15 kW,
Total weight 21740 kg.
top