Category : Gear Machines

Sub-Category : Gear Hobber

Total Machines Found : 390

Select | Machine Details
 
  1
IDMA35037
MakePfauter
ModelP1250
YOM1966
ConditionGood Condition
PhotoSee Photo
Wheel diameter, max.: 1250mm, 49.2"
Gear width: 580mm, 22.8"
Module Max.: 12
Length of teeth cutting, max.: 500-580mm, 19.7-22.8"
Table Diameter: 950mm, 37.4"
Table bore diameter: 200mm, 7.87"
Hob diameter: 220mm, 8.66"
Cutter length max.: 260mm, 10.2"
Shifting: 240mm, 9.44"
Total power requirement: 20kW
Approximate Machine weight: 30,000 lbs
Approximate Machine dimensions: 192" x 116" x 100" H
Universal Hob Head.
Automatic Hob Shifting.
Radial Feed. Differential.
Radial And Axis Rapid Traverse.
Power Clamping.
Stepless Hob Speed Control.
Stepless Feed Control.
Tailstock. 1-1/4 1-1/2 2 and 2-1/2 Arbors.
Large Quantity of Change Gears.
 
  2
IDMI7863
MakeWahli
ModelH80
YOM
ConditionGood Condition
PhotoSee Photo
-Maximum module in steel with a tensile strength of approx. 38 tons/sq. in.
D.P. 4.45 in. in.
-Spur gears-
Maximus Workpiece diameter - 5.90" in
Maximus axial slide travel:-5.90" in
Maximum hob head swivel angle :- Degrees+45
Minimum number of teeth (double-start index drive) :-2
Specifications
Work table diameter:-6.30" in
Table bore diameter.:- 2.48" in
Maximum hot dimensions
Diameter -5.10" in
Length:- 8.65" in
Hot arbor dieneters :- 1/2, 3/4, 7/8, 1 1/4.
Center distance between hob and Workpiece
Minimum:- .40" in
Maximum :- 6.30" in
Taper for hob arbors:- Steep taper. 40
Maximum hot shift.:- 6.7" in
Speeds, Feeds end Rapid Traverses
Hob speed:- Min-1 150 to 600
Teele speed. Min -1 1 to 80
Feeds (axial and radial):- min .40 to 59.0
Rapid creverses (axial, radiel and tangential)... in./min. 118
. Electrical Standard Equipments:
Voltage :- V 230/460
Frequency :-Hz 60
Connected load of the machine:- approx kVA :- 48
Weight and Space Requirements
Weight of the machine. :-approx. 1bs. 16,650
Space required for the machine (With space required for the chip box and open doors)
Length :-178.6" in
Width:- 134.9" in
Height:- 91.2 " in
 
  3
IDMI7862
MakeWMW
ModelZFWZ 250/5
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of work-piece: 250 mm
Max module: 6
Max axial feeding travel: 275 mm
Max tangential feeding travel (hob shift):
100 mm
Max helix angle: 45 degree
Min number of teeth cut: 8.
Min number of teeth cut using the indexing:
4 WORKPIECE DIMENSIONS
Max hob diameter: 145 mm
Max hob length: 170 mm
Diameter of a tightening surface of a table:
275 mm
Diameter of a centering element of a table:
200 mm Depth of a centering element of a table: 75
mm
Distance from the hob center to surface of
work table:
-Min: 195 mm
-Max: 470 mm
Distance from the hob center to the of work table:
-Min: 20 mm
-Max: 230 mm
Cone of the hobbing: 45
CAPACITY AND DIMENSIONS
Hob speed: 50-200 rev/min
Hob speed variable in 2 ranges: 125-400
rev/min
Main motor: 7,5 kW
General power consumption: 20 kw
Electricity: 50 Hz 380 V
Machine dimension: 3000x3475x2200 mm Machine weight: 5500 kg
 
  4
IDMA35027
MakeRussian
Model5K328
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Weight: 14000 kg.
5K328a Vertical gear hobbing machine for cylindrical wheels. Purpose and scope
Gear hobbing machine 5K328A was replaced by a more advanced model 53A11, which allows processing wheels 1250 mm with module 12.
Universal gear hobbing machine semiautomatic device 5K328A is designed for cutting (milling) cylindrical spur, helical and worm gears in single and batch production. The cutting of gears is carried out by the method of running in a worm cutter and a workpiece to be processed by passing or counter milling methods. The machine works in a closed semi-automatic cycle and in a set-up cycle. The presence of cycles of radial, tangential and diagonal feed significantly expands the technological capabilities of semiautomatic devices.
The principle of operation and design features of the machine
The 5K328A machine has a fixed table and a movable stand. The presence of a universal milling support in the machine allows processing cylindrical and worm wheels by the method of radial plunge and tangential feed. On the basis of the machine, special machines can be manufactured that allow processing wheels with barrel-shaped or tapered teeth. Processing is carried out by copying the template.
When gear hobbing with a diagonal feed, the cutter moves along the cut tooth and simultaneously along its own axis, which significantly increases its durability.
The design of the machine provides for the possibility of radial penetration of the cutter into the workpiece, which reduces the machining time.
On the basis of the 5K328A machine, machines (model 53A11S2) can be manufactured for processing rolls of a periodic profile for rolling reinforcement on rolling mills.
The great versatility of 5K328A machines and a high degree of automation ensure the operation of the machines in both single-pass and double-pass automatic cycles. With a two-pass automatic cycle, the processing modes are automatically changed. The semiautomatic device has a stepless drive of vertical and radial feed.
Significant power of the cutter drive electric motor, high speeds and sufficient overall rigidity of the machine tools allow processing at high modes with speeds up to 60 ... 70 m / min.
On the basis of these machines, the Yegoryevsk machine-tool plant "Komsomolets" produced a large number of special machines for processing gear wheels of various sizes and shapes, including for processing parts with a barrel-shaped and tapered tooth shape
The 5K328A machine works in a semi-automatic cycle.
The 5K328A machine is made in accordance with the accuracy standards according to GOST 659-67.
With them there is available a set of tools and gears.
 
  5
IDMA35026
MakeRussian
Model5K32A
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Weight: 7200 kg, 2 items (each)
The machine semiautomatic device 5K32A and 5K324A universal gear hobbing is designed for milling cylindrical gears, as well as worm gears by the radial method in conditions of medium and large-scale production.
The cutting of gears is carried out according to the method of running in a hob cutter and a workpiece to be processed by the methods of both "passing" and "counter" gear hobbing with diagonal and normal feed.
When gear hobbing with a diagonal feed, the cutter moves along the cut tooth and simultaneously along its own axis, which significantly increases its durability.
Due to the absence of a broaching feed in the design of the 5K32A machine, worm wheels are cut only by the radial plunge method.
The 5K32A machine works in a semi-automatic cycle.
When processing spur gears in the 5K32A machine, the following movements should be carried out:
main movement
vertical feed of the caliper
table rotation and positioning movements of the support
With automatic cycles, in addition, radial feed and table setting movements are performed. When processing helical gears, additional rotation of the table is required to process teeth located along a helical line.
When processing worm wheels by the radial feed method in the machine, the following are performed:
main movement
radial feed and table positioning movements
From the processing area, the chips are separated by a conveyor into a special trolley.
Semi-automatic machines are not built into the automatic line.
Machine accuracy class N.
Surface roughness V6.
The 5K32A machine is made in accordance with the accuracy standards according to GOST 659-67.
 
  6
IDMA35025
MakeRussian
Model53A80K
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Weight: 11200 kg
Universal gear hobbing semi-automatic model 53A80K is designed for cutting cylindrical and worm gears in conditions of individual and serial production.

The machine consists of the following units:
- bed;
- chip conveyor;
- gearbox and drive;
- support support;
- support carriage;
- movement distribution box;
- feed box;
- support;
- table;
- counter support;
 
  7
IDMA34998
MakeGleason USA
Model782
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
EQUIPPED WITH:

Fanuc 16iM Control
180 deg. Auto Loader
Pulse Generator
Hydraulic Chuck
Tailstock w/Center
Hob Setting Stand
High Helix Head
Light Curtains
Updated Hydraulics
Chip Conveyor
Coolant System
Transformer
Auto Retract

SPECIFICATIONS:

MAXIMUM WORKPIECE DIAMETER 12"
MAXIMUM DIAMETRAL PITCH 4 DP
AXIAL TRAVEL 11.5"
MAXIMUM HOB DIAMETER 5"
HOB SPEED 680 RPM
CONTROL MANUFACTURER FANUC
CONTROL CNC (FANUC 16IM)
DIMENSIONS 145 X 112 X 98.75"
WEIGHT 18,000 LBS
Specifications:
Max. Workpiece Diameter: 12"
Max. Diametral Pitch: 4 NDP
Max. Helix Angle: +/- 45 deg.
Min./Max. Number of Teeth: 4/256
Min./Max. Center Distance from Hob Spindle to Worktable: 1"/12.5"
Min./Max. Height Worktable To Center of Hob Spindle: 6.25"/17.75"
Max. Distance Worktable to Tailstock Center: 32"
Max. Axial Hob Slide Travel: 11.5"
Max. Radial Slide Travel: 11.5"
Worktable Mounting Diameter: 10.75"
Max. Hob Diameter: 5"
Max. Hob Length: 8.5"
Tangential Slide Travel (Hob Shift): 7.25"
Hob Speed Range: 80 to 680 rpm
Worktable Speed: 1-110 rpm
Carousel Lift Piston Capacity: 100lbs
Approximate Dimensions LxWxH: 145" x 112" x 98.75"
Approximate Weight: 18,000lbs
 
  8
IDMA34997
MakeGleason USA
Model782
YOM1995
ConditionGood Condition
PhotoSee Photo
Equipped With:
Fanuc 16IM
Arbor Support
Tailstock W/Center
Hob Setting Stand
High Helix Head
Pulse Generator
6 -Axis
Light Curtain
Hydraulic System
Mist Collector
180 deg. Loader
Coolant System
Chip Auger
Auto Retract
Specifications
Maximum Workpiece Diameter :- 12"
Maximm Diameteral pitch :- 4DP
Axial Travel :- 11.5"
Maximum Hob Diameter :- 5"
Hob Speed :- 680 RPM
Control Manufacturer :- Fanuc
Control :- CNC Fanuc 16IM
Dimensions :- 145" x 112" x 98.75"
Weight :- 18,000 LBS
Specifications
Max. Helix Angle: +/- 60 deg.
Min./Max. Number of Teeth: 4/256
Min./Max. Center Distance from Hob Spindle to Worktable: 1"/12.5"
Min./Max. Height Worktable To Center of Hob Spindle: 6.25"/17.75"
Max. Distance Worktable to Tailstock Center: 32"
Max. Axial Hob Slide Travel: 11.5"
Max. Radial Slide Travel: 11.5"
Worktable Mounting Diameter: 10.75"
Max. Hob Diameter: 5"
Max. Hob Length: 8.5"
Tangential Slide Travel (Hob Shift): 7.25"
Hob Speed Range: 80 to 680 rpm
Worktable Speed: 1-110 rpm
Carousel Lift Piston Capacity: 100lbs
 
  9
IDMA34996
MakeGleason USA
Model782
YOM1995
ConditionGood Condition
PhotoSee Photo
Equipped With:
Fanuc 16iM control
Hydraulic Chuck
Tailstock w/Center
hob setting stand
high helix head
transformer
chip conveyor
coolant
hydraulic system
light curtain
180 deg. auto Loader
auto Retract
Specification
Horz/Vert :- Vert
Maximum Workpiece Diameter :- 12"
Maximum Diameter Pitch :- 4 DP
Axial Travel :- 11.5"
Maximum Hob Diameter :- 5"
Hob Speed :- 680 RPM
Control :- CNC Fanuc 16iM
Dimensions :- 145" x 112" x 98.75"
Weight :- 18,000 LBS
Specifications:
Max. Helix Angle: +/- 45 deg.
Min./Max. Number of Teeth: 4/256
Min./Max. Center Distance from Hob Spindle to Worktable: 1"/12.5"
Min./Max. Height Worktable To Center of Hob Spindle: 6.25"/17.75"
Max. Distance Worktable to Tailstock Center: 32"
Max. Axial Hob Slide Travel: 11.5"
Max. Radial Slide Travel: 11.5"
Worktable Mounting Diameter: 10.75"
Max. Hob Length: 8.5"
Tangential Slide Travel (Hob Shift): 7.25"
Hob Speed Range: 80 to 680 rpm
Worktable Speed: 1-110 rpm
Carousel Lift Piston Capacity: 100lbs
 
  10
IDMA34978
MakeStanko-Russia
Model5E32
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of gear 800 mm
Max modul 6
The machines full complete and nice working condition
Weight each machine is 4 tons
Quantity: 5 nos
 
  11
IDMA34954
MakeKLINGELNBERG
ModelSNC30
YOM
ConditionGood Condition
PhotoSee Photo
Work diameter - 300 MM
Centre Distance - 400..800 MM
Grinding Wheel Diameter - 150..300 MM
Weight - 3800 KG
 
  12
IDMI7847
MakeCima
ModelCE260
YOM1996
ConditionGood Condition
PhotoSee Photo
- 6 Axis.
ALL MOTORS ARE SIEMENS.
CNC control : NUM 760 (Upon Requirement Can Be Changed)
Max workpiece dia : 300 mm.
Max. hobbing module : 8.
Minimum number of teeth : 4
Max head adjustment : +- 45
Tailstock travel : 250 mm.
Hob speed : 100-700 rpm.
Max. Worktable speed : 80 rpm.
Min distance between hob and worktable : 20 mm.
Max distance between table and work gear hobbing center : 290 mm.
Min distance between hobbing and work table axes : 125 mm.
Max distance between axes hobbing and work table : 385 mm.
Max hobbing vertical travel : 260 mm.??? max.
Hobbing diameter : 140 mm.
Max. hobbing length : 240 mm.
Max. shifting travel : 200 mm.
Work table dia : 260 mm.
Table hole : 80 mm.
Division wheel dia : 380 mm.
Approx weight of the machine : 12.000 Kg.
 
  13
IDMA34937
MakeGleason-Pfauter
ModelP2000
YOM2007
ConditionVery good condition
PhotoSee Photo  |  See Video
With head for inter nal and external milling
CNC Siemens 840D
Max. diameter for internal gear : 2240 MM
Max. Diameter for External Gear : 1550 MM
Maximum profile depth : 65mm
Minimum internal diameter : 630mm
Maximum face width : 470mm
Maximum ring size : 230mm
Largest permissible outside diameter : 440mm
Maximum lenght : 90mm
Arbor Diameter : 60mm
Radial (x axis) : 1330mm
Axial(z axis) : 1300mm
Tool speeds : 18 to 220min
Maximum profil depth : 20mm
Maximum diameter : 1550mm
Largest permissible outside diameter : 300mm
Maximum lenght : 70mm
Hob Arbor diameter : 40mm
Outside diameter : 1460mm
worktable bore : 500mm
Maximum permissible load : 200kn
Overall dimensions and weight
Lenght : 15590mm
Widht : 6660mm
Height : 3706mm
Weight of the machine (approx): 36000kg
Electrical equipment :
operating voltage : 460v
supply voltage :230v
control voltage : 24v
Frequency : 60hz
connected load of the machine : 100KVA
Cable cross sectiional area : 95mm
Protection : 200A
Speed Rapid Traveeses
Axis x : 3000mm/min
Axix z : 4000mm/min
speed : worktable : 0 to 8 min
 
  14
IDMA34935
MakeLiebherr
ModelLH 90 GH
YOM1993
ConditionGood Condition
PhotoSee Photo
Gear Diameter ( max ) :- 4000 MM
Gear Width :- 1800 MM
Module :- 4-40
Connection : 400V/50Hz
Total Power :- 110 KW
This machine is still under power and has been maintained very well throughout the year
the machine is equipped with 7 Axis and accuracy report is available.
 
  15
IDMA34909
MakeKLINGELNBERG
ModelSNC 30
YOM1986
ConditionGood Condition
PhotoSee Photo  |  See Video
Max Working Diameter 300 MM
 
  16
IDMI7825
MakeTOS
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
dia : 1600mm
Complete with gear set & Tail stock
 
  17
IDMI7822
MakeCugir,Romania
ModelFD250
YOM
ConditionGood Condition
PhotoSee Photo
dia : 250mm
 
  18
IDMI7799
MakePfauter
ModelP630
YOM
ConditionGood Condition
PhotoSee Photo
Max. wheel diameter - 630 mm
Max. module - 10 mm
Table diameter - 550 mm
Gear width - 410 mm
Dimensions: 5980x2915x3430 mm
Total weight: 9000 kg
 
  19
IDMI7782
MakePfauter,German
ModelP251
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel diameter: 250 mm
Max wheel width: 242 mm
Max module: 6 mm
Min number of teeth: 2
Milling cutter diameter x width: 130155 mm
Adjustment of milling-spindle: 115 mm
Milling slide swivelling: 240 mm
Table diameter: 250 mm
Table hole: 63 mm
Electrics-voltage/frequency: 380 / 50 V/Hz
Distance table / counter stay 565 mm
Distance table / middle of spindle 380 mm
Center distance between workpiece-tool min/max.: 10 210
Main drive: 6,6 kW
Main motor: 13,6 kW
Dimensions: 2800x1900x2500 mm
Weight of machine: 3600 kg
 
  20
IDMI7781
MakeLiebherr
ModelL301
YOM
ConditionGood Condition
PhotoSee Photo
Maximum Pitch Diameter with a 4″ Hob 13.32″
Maximum Pitch For Hobbing Steel: 4,25 DP
Maximum Workpiece Diameter: 11.811″
Travel Of Hob Head Carriage: 8.858″
Work Table Diameter: 12.401″
Hob Spindle Centerline Above Machine Table: 6.496″ Minimum
Maximum Length Of Workpiece: 26.772″
Infinitely Variable Radial Feed: .039″ .472″/Minute
Rapid Traverse Of Hob Slide: 37.795″/Minute
Weight Of Machine: 14,000# Approx
Maximum Hob Length 5.900″ Maximum Hob Diameter: 5.512″
Maximum Hob Shift Or Tangential Travel: 5.900″
Hob Head RPM, Infinitely Variable: 80 640
EQUIPPED WITH:
Differential
Two-Cut Cycle
Auto Hob Shift
Crowning
Tailstock
Chip Conveyor
Coolant
440 Volt, 3 Phase, 60 Cycle
Change Gears
Operators Manual
 
  21
IDMI7780
MakeLiebherr
ModelH400
YOM
ConditionGood Condition
PhotoSee Photo
Retrofitted to 3 Axis CNC with Fanuc system
Diameter 400
Module 10
Machine can be inspected on power
 
  22
IDMA34756
MakeSicmat
ModelNRSU310
YOM
ConditionGood Condition
PhotoSee Photo
Maximum diameter of the hand wheel: 600 mm,
Module: 6 mm
 
  23
IDMA34755
MakeLorenz
ModelLS400
YOM
ConditionGood Condition
PhotoSee Photo
MAX. MODULE 8
MIN. MODULE 1
MAX. EXTERNAL DIAM. 400 MM
TABLE DIAM. 800 MM
DISTANCE BETWEEN THROAT AND BLADE 500 MM
TOTAL POWER 15 KW
WEIGHT 6500 KG
 
  24
IDMA34754
MakeLorenz
ModelLF151
YOM
ConditionGood Condition
PhotoSee Photo
gear- 150 mm, modul max. 4 mm, cooling device, switchboard system, control unit, conveyor
 
  25
IDMA34753
MakePfauter,German
Model
YOM
ConditionGood Condition
PhotoSee Photo
max. wheel diameter: 300 mm
gear width 720 mm
max. module: 10
min. module: 1
centre distance: 875 mm
 
  26
IDMA34752
MakePfauter,German
ModelRA200
YOM
ConditionGood Condition
PhotoSee Photo
diameter of workpiece -- 240 mm
diameter of boring -- 90 mm
max diameter of milling cutter -- 130 mm
max width of milling cutter -- 180 mm
diameter of milling arbor -- 32 mm
max / min distance between centre line of milling
cutter and workpiece 175/40
Morse taper -- 4
max shift of milling cutter -- 145 mm
milling cutter r.p.m. -- 125-140,160-180 r.p.m.
axial feed -- 8-120 mm / min.
WEIGHT 7000 KG
 
  27
IDMA34751
MakePfauter
ModelPH280
YOM1995
ConditionGood Condition
PhotoSee Photo
Weight: 7000 kg
CAPACITY 'OF WORK:
Diameter min / max 20/280 mm workable
Module max 7
Dentabile band width max 150 mm
Distance max.tra centers contropunte800mm
Height 300mm tailstock centers
30mm Tailstock Mobile
Max stroke. worktable +/- 80
Max stroke, worktable for car.aut +/- 110
45 inclination angle grinder +/-
Outside Diameter 400mm max.mola
Max wheel band 55 mm
Moving between axis tool holder
And axis tailstock -158 / + 42 mm
Ang. max.inclinazione slide adjustable +/-
WEIGHT OF THE MACHINE
 
  28
IDMA34750
MakePfauter
ModelP900
YOM
ConditionGood Condition
PhotoSee Photo
max. wheel diameter: 900 mm
gear width: 450 mm
max. module: 10
min. module:
total power requirement: 16 kW
weight of the machine ca.: 8.500 kg
 
  29
IDMA34740
MakeLiebherr
Model
YOM
ConditionGood Condition
PhotoSee Photo
Maximum diameter of gear............... 26" (650mm)
Maximum DP (module) steel.............. 2.5 DP (10-module)
Maximum axial travel (vertical)........ 14.5" (370mm)
Minimum number of teeth cut............ 6
Work table diameter.................... 22" (560mm)
Master worm-wheel diameter in table.... 22.6" (575mm)
Table bore diameter.................... 7.5" (190.5mm)
Min center distance between hob & work. 2" (50mm)
Max center distance between hob & work. 17" (435mm)
Clamping height above worktable........ 8.5" (215mm)
Maximum hob diameter................... 7.8" (200mm)
Maximum hob length..................... 7.8" (200mm)
Hob spindle taper...................... No. 5 Morse
Maximum hob shift (tangential)......... 5.31" (134.9mm)
Hob rpm range (infinitely variable).... 30-224 rpm
Feed range: (infinitely variable)
Axial: (per/rev.)...................... .0372-.2602"
Axial: (per/rev.)...................... (.0945-6.61mm)
Axial: (per/rev.)...................... .0092-.0649"
Axial: (per/rev.)...................... (.0236-1.65mm)
Radial: (per/min.)..................... .0039-.4724"
Radial: (per/min.)..................... (0.1-12mm)
Tangential: (per/min.)................. .0093-.0653"
Tangential: (per/min.)................. (0.237-1.66mm)
Tangential: (per/min.)................. .0023-.0163"
Tangential: (per/min.)................. (0.06-0.415mm)
Clearance for long shafts,
measured from table surface............ 33.5" (850mm)
Weight of basic machine................ 19,000 Lbs.
Weight of basic machine................ (8,636 kGs.)
Floor space requirements............... 145"x 75" 104"
 
  30
IDMA34739
MakeLiebhett
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max 385 Rpm,
This machine is suitable for cutting spur and helical
gears, pinions, splines, sprockets,
worm gears andother workpieces of similar profile, up to 25.6 (650MM)
diameter
PRINCIPAL SPECIFICATIONS
- Workpiece diameter: 25.60
- Maximum pitch (86000 psi steel): 2.54
- Maximum hob slide travel (standard): 19.7
- Work table diameter: 23.2
- Max. hob diameter 7.56
- Max. hob length 9.84
- Master worm wheel, pitch diameter: 22.64
- Table bore diameter: 5.512
- Minimum distance between hob and table center: 1.97
- Maximum distance between hob and - table center: 17.12
- Hob spindle speed ranges (infinitely variable): 48-385 RPM
- Axial feed, inch/per/rev. (infinitely variable): .015 - .354
- Radial feed, inch/per/rev. (infinitely variable): .028 x .55
- Rating of main motor: 16 HP
- Floor space required: 186 x 125
- Shipping dimensions: 127 x 63 x 122
- Approximate net machine weight: 24,700 lbs.
 
  31
IDMA34733
MakeLiebherr
ModelLN350
YOM1978 - Retrofitted in 2006
ConditionGood Condition
PhotoSee Photo  |  See Video
Maximum diameter pieces: 350 mm
Module: 10
 
  32
IDMA34731
MakeSchiess,German
ModelRF40
YOM
ConditionGood Condition
PhotoSee Photo
Table - 3000mm
Max diameter - 4600mm
Table capacity - 40000kg
Modul - 30/42/65
Wheel width - 2500mm
Weight - 115 000kg
 
  33
IDMA34715
MakePfauter
ModelPE-800
YOM1995
ConditionGood Condition
PhotoSee Photo
achine released from plant in Japan
Vertical Hob Grinder Pfauter PE-800 1995
SiemensControl. CRT is damaged Now used with PC
New machine has been purchased fr replacing thos machine
 
  34
IDMA34694
MakeTos Czech
ModelFO6
YOM
ConditionGood Condition
PhotoSee Photo
Maximum module of the gear to be cut: 6 mm,
Max. diameter of a straight gear to be cut: 600 mm,
Min and max distance between table and center of hob spindle: 40/430 mm,
Vertical displacement of hob slide: 350 mm,
Max. width of straight teeth to be cut with diameter of gear 600 mm.....280 mm,
Max. width of straight teeth to be cut with diameter of gear of gear 75 mm.....200 mm,
Max. widths of teeth and diameters of gears to be cut with helical gears with helix angle of teeth of about 15 deg.... tooth width ... 250 mm
dia of gear.... 600 mm,
With helix angle of teeth of about 30 deg. .... tooth width ......210 mm,
dia of gear......600 mm,
With helix angle of teeth of about 45 deg. .... tooth width ......190mm,
dia of gear......500 mm,
With helix angle of teeth of about 60 deg. .... tooth width ......90mm,
dia of gear......450 mm,
Max. weight of workpiece: 500 kg,
Max. diameter of hob: 120 mm,
Max. width of hob: 130 mm,
Dia of work table420 mm,
Bore of work table: 750 mm,
Depth of bore of work table: 550 mm,
Diameter of index worm wheel: 450 mm,
Diameter of work arbor: 30 mm,
Diameter of cutter arbors: 22,27,32 mm,
Min distance between centre of hob and surface of work table: 160 mm,
Number of hob spindle speed: 12,
Range of fed for 1 revolution of table a/vertically....0.33-5.2mm,
b/longitudinally...0.1-1.5 mm,
output of the main motor/1400/2800 rpm....3/4 kw,
Output of the motor for the rapid traverse/1400 rpm....0.75 kw,
Output of the coolant pump motor/2800 rpm....0.185 kw,
Output of the lubricating pump motor/1400 rpm....0.1 kw
Weight of the machine with standard equipment... approx 4100 kg,
Weight of the machine with normal packing... approx 4350 kg,
weight of the normal machine with seaworthy packing...4800 kg,
Weight of the seaworthy packing....00 kg,
Outside dimensions of seaworthy packing:
length x width x height: 3050 x 1600 x 2260 mm
 
  35
IDMA34687
MakeKolomna Russia
Model5342
YOM1969
ConditionGood Condition
PhotoSee Photo
Max. diameter gears cut: 2000 mm
Max. vertical moving of milling support: 900 mm
Max. module of processed wheel (not less):
-Worm mill: 20
-Disk mill: 25
-Manual mill: 30
Table diameter: 1800 mm
Max. work-piece weight: 20 tons
Max. corner: +/- 45 degrees
Diameter of installed worm mills: 300-500 mm
Amount of cutting teeths: 10-1800
Spindle speed: 8-125 rpm
Electricity: 50 Hz, 380 V
Main motor power: 20 kW
Overall dimensions (LxWxH): 8600x4440x3700 mm
Machine weight: 32040 kg
 
  36
IDMI7730
MakePfauter
ModelP1250
YOM
ConditionGood Condition
PhotoSee Photo
with change gears - arbors - max gear diameter 1250 mm - max face width 500 m - max modul 14
 
  37
IDMA34434
MakePfauter
ModelP251
YOM
ConditionGood Condition
PhotoSee Photo
Gear diameter - 250mm
Gear width - 242mm
Table diameter - 250mm
Module - 4
Weight - 3600kg
 
  38
IDMA34433
MakeLiebherr
ModelL252
YOM
ConditionGood Condition
PhotoSee Photo
Gear width - 250mm
Module - 6
Table capacity - 2000kg
Machine's weight - 5200kg
 
  39
IDMA34144
MakeWMW Modul
ModelZFWZ3000x30
YOM1956
ConditionGood Condition
PhotoSee Photo
Max diameter without the holder: 3150 mm
Max diameter with the holder: 1600 mm
Min diameter: 500 mm
Min width of a tooth: 1000 mm module 30
Max corner of an inclination of a tooth: 45 degree
Max rearranging of a tangential pusher: 500 mm
MILL
Max. diameter: 350 mm
Max. length: 440 mm
TIGHTENING A TABLE
Diameter: 2400 mm
Aperture: 500 mm
Depth of an aperture: 1100 mm
The greatest loading: 30 ton
Vertical distance between the middle: 700-1900 mm
SPEEDS
Hob turning speeds: 12,5 - 71 U/min
Feeds axial: 0-16 mm/U
Feeds - radial: 0-7, 1 mm/U
Feeds - tangential: 0-8,0 mm/U
MILLS AND A SURFACE OF A TABLE
Horizontal distance between the middle: 300-1800 mm
SET
Control system: 6000 kg
Table: 10000 kg
Bed: 8000 kg
Bottom part of bed: 9000 kg
The main rack with ladder: 15000 kg
The back rack: 10000 kg
Pusher of rack: 6000 kg
Box with change gears: 1300 kg
Additional details: 4000 kg
Box with equipment for installation of preparation for the machine: 1500 kg
Tanks: 2000 kg
Electricity box: 900 kg
Hidrostation: 500 kg
Electrical specifications: 380 V, 220V, 50 Hz, 3 MP
Main motor: 70 kW
Dimension: 6785x5400x4820 mm
Weight: 65 ton
 
  40
IDMA34133
MakeWMW Modul
ModelZFWZ10/1 CNC
YOM1985/2001
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 1600 mm
gear width 1000 mm
max. module 16/22
min. module 2
table diameter 1200 mm
Control FAGOR CNC 8050/55 M
spindle turning speed range 8 - 250 U/min
total power requirement 81 / 63 kVA
weight of the machine ca. 18 t
dimensions of the machine ca. 5,6 x 4,7 x 4,5 m
Description
overhauled/modernized in 2001
equipped with:
- CNC Control FAGOR CNC 8050/55 M
- SChip Conveyor
- with max. wheel diameter from 1600 mm
Control FAGOR CNC 8050/55 M
 
  41
IDMI7472
MakePfauter
ModelPE320
YOM
ConditionGood Condition
PhotoSee Photo
Workpiece diameter - max. 400 mm
Axial travel 400 mm
Module 8 mm
Table Bore Diameter 80 mm
Maximum Hob Diameter 175 mm
Length 800 mm
6 Axis Siemens/fanuc CNC Control
 
  42
IDMA34026
MakePfauter,German
ModelP1501
YOM1979
ConditionGood Condition
PhotoSee Photo
Max. wheel diameter: 1500 mm
Gear width: 600 mm
Max. module: 16
Min. module: 1
Maximum axial offset: 600 mm
Min. number of teeth: 9
Table diameter: 1200 mm
Table hole :300 mm
Milling spindle speeds (infinitely variable): 30 - 180 U/min
Weight of the machine ca. :20,5 t
Dimensions of the machine ca.:7,5 x 3,5 x 4,7 m
 
  43
IDMA33898
MakeReinecker
ModelRFW1
YOM
ConditionGood Condition
PhotoSee Photo
Work-piece diameter over saddle: 340 mm
Milling length: 2250 mm.
Max hole through the work spinlde:70 mm
Modul : 10
 
  44
IDMA33727
MakeKolomna Russia
Model5342
YOM
ConditionGood Condition
PhotoSee Photo
Max. gear diameter: 2000 mm
 
  45
IDMA33676
MakeWMW,Germany
ModelZFWZ-315
YOM
ConditionGood Condition
PhotoSee Photo
Max work piece dia: 400 mm
Module: 8
Table dia: 370 mm
Power: 18 kW
Weight of machine: 8 t
 
  46
IDMI7302
MakeCugir,Romania
ModelFD320
YOM
ConditionGood Condition
PhotoSee Photo
Dia :- 320
Arbor
10. Mm
13 mm
22 mm
27 mm
32 mm
 
  47
IDMA33531
MakeLiebherr
ModelLC502-3
YOM
ConditionGood Condition
PhotoSee Photo
Max- wheel diameter : mm 500
Max. module : 10
Power motor : kw 17
weight : kg. 9.000
dimension : mm 4100x 2410 x3200
 
  48
IDMA33529
MakeKOLOMNA
Model5A342
YOM
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter, mm 2000
Max. work piece diameter with tail-stock, mm 1200
Min. work piece diameter, mm 200
Max. vertical moving of milling support, mm 900
Distance between hob axis and table axes, mm 150...1245
Distance between hob axis and table surface, mm 580...1480
Table diameter, mm 1800
Spindle speed range, rpm 8...125
Spindle speeds, qty 25
Vertical feeds quantity, qty 18
Horizontal feeds quantity, qty 18
Min. processed wheel teeth, qty 20
Max. module 25
Max. module with worm hob 20
Max. gear teeth angle, degree 45
Max. work piece weight, kg 20000
Max. diameter of installed worm mills, mm 300
Max. length of installed worm mills, mm 500
Table workable area, mm 1800
Table opening diameter, mm 250
Worm pitch wheel diameter, mm 1650
Teeth quantity of pitch wheel, qty 165
Voltage, V 380
Frequency, Hz 50
Main motor power, kW 20
Machine dimensions, mm 6910 x 4440 x 3700
Machine weight, kg 31800
 
  49
IDMA33373
MakePfauter,German
ModelP3000B
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPMENT / FEATURES:
UNIVERSAL HOB HEAD W/AUTOMATIC HOB SHIFT
OUTBOARD SUPPORT COLUMN (CLAMSHELL TYPE)
DIFFERENTIAL MECHANISM - HYDRAULIC TABLE RELIEF
FULLY AUTOMATIC WORK CYCLES
CHANGE GEARS - CHIP CONVEYOR

CATALOGUE SPECIFICATIONS:
WORKPIECE DIAMETER, MAXIMUM 120"
RATED PITCH IN STEEL, MAXIMUM 1 DP
HOB DIAMETER, MAXIMUM 11.4"
HOB LENGTH, MAXIMUM 13"
WORK TABLE DIAMETER 75"
WORK TABLE BORE DIAMETER 20"
AXIAL TRAVEL, MAXIMUM 41.3"
HOB SHIFT, MAXIMUM 12"
DISTANCE WORKPIECE TO HOB, MAXIMUM 65"
DISTANCE WORKPIECE TO HOB, MINIMUM 11.8"
NUMBER OF TEETH CUT, MINIMUM 16
HOB SPEEDS,INFINITELY VARIABLE 12 TO 150 RPM
AXIAL FEEDS RANGE, INFINITELY VARIABLE .014 TO 283 IPR
RADIAL FEEDS RANGE, INFINITELY VARIABLE .003 TO .059 IPR
MAIN MOTOR HORSEPOWER 20 HP
FLOOR SPACE REQUIRED, L X W 260" X 159"
OVERALL HEIGHT 151"
WEIGHT APPROXIMATELY 68000 LBS
 
  50
IDMA33213
MakeKolomna Russia
Model5342
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter gears cut: 2000 mm
Max. vertical moving of milling support: 900 mm
Max. module of processed wheel (not less):
-Worm mill: 20
-Disk mill: 25
-Manual mill: 30
Table diameter: 1800 mm
Max. work-piece weight: 20 tons
Max. corner: +/- 45 degrees
Diameter of installed worm mills: 300-500 mm
Amount of cutting teeths: 10-1800
Spindle speed: 8-125 rpm
Electricity: 50 Hz, 380 V
Main motor power: 20 kW
Overall dimensions (LxWxH): 8600 x 4440 x 3700 mm
Machine weight: 32040 kg
 
  51
IDMA33171
MakeKolomna Russia
Model5A342PF2
YOM1990
ConditionGood Condition
PhotoSee Photo
The largest diameter of the machined cylindrical gears, mm 2000
The greatest length of vertical movement of a milling support, mm 900
The largest module of the machined wheel (not less), mm:
- worm cutter 20
- a disk mill 25

The greatest angle of inclination of the tooth line of the gears being machined, degrees 45
Diameter of a table, mm 1800
The largest mass of the installed workpiece (taking into account the mass of the fixing elements), kg 20,000
The largest diameter of the installed worm cutters, mm 300
The greatest length of the installed worm mills, mm 500
The limits of the numbers of cut teeth 10 ... 1800
Spindle speed limits, rpm 8 ... 125
Axial feed limits, mm / min:
- when running in 0.02 ... 510
- in single division
The limits of radial feeds, mm / min 0,013 ... 328
The greatest twisting moment on a spindle (not less), kN.m 2,5
Type of current supply network Alternating three-phase
Rated frequency, Hz 50 **
Rated voltage, V 380 **
Drive power of the main movement (not less), kW 20
Overall dimensions of the machine, mm:
- length 8600
- width 4440
- height 3700
- height above floor level 3800
Machine weight, kg 32040
 
  52
IDMA33104
Make
ModelEZS446-380
YOM1991
ConditionGood Condition
PhotoSee Photo
Diameter of cutting gear - 800 mm
Hobbing support's vertical support - 400 mm
Modul - 10
Min number of teeth - 12
Vertical travel of the support:
- 200 mm (30 degrees of pitch)
- 150 mm (45 degrees of pitch)
Spiral wheel diameter:
- 500 mm (30 degrees of pitch)
- 350 mm (45 degrees of pitch)
 
  53
IDMI7209
MakeCooper,India
ModelP251
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Max wheel diameter: 250 mm
Max wheel width: 242 mm
Max module: 6 mm
Min number of teeth: 2
Milling cutter diameter x width: 130x155 mm
Adjustment of milling-spindle: 115 mm
Milling slide swivelling: 240 mm
Table diameter: 250 mm
Table hole: 63 mm
Electrics-voltage/frequency: 380 / 50 V/Hz
Distance table / counter stay 565 mm
Distance table / middle of spindle 380 mm
Center distance between workpiece-tool min/max.: 10 - 210
Main drive: 6,6 kW
Main motor: 13,6 kW
Dimensions: 2800x1900x2500 mm
Weight of machine: 3600 kg
 
  54
IDMA33030
MakePfauter
ModelP900
YOM1963
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 900mm
max. module 8mm
max. length of teeth cutting 498mm
control conventional
min. number of teeth 4 / 8
diameter milling arbor max. 60mm
max. milling cutter diameter 195mm
Distance of shafts 50 - 550mm
tool taper MK 5
work table:
table diameter 700mm
boring diameter 100mm
max. table load -kg
feeds:
turning speeds
speeds of tool 62 - 3901/min
total power requirement 16kW
weight of the machine ca. 7,8t
dimensions of the machine ca. 6,0 x 4,0 x 2,5m
 
  55
IDMA33014
MakeKaraz
ModelGH-27
YOM1966
ConditionGood Condition
PhotoSee Photo
Table Diameter : 3,200 mm
Single cutter : dia 5,200 mm
Wheel max diameter : 10000 mm
Maximum HOB : 460mm dia X 610mm L
Length of bed : 6,998 mm
Tool Holder : 1,200 mm
Crossrail : 1,850 mm
 
  56
IDMI7184
MakeCooper Pfauter
ModelP251
YOM
ConditionGood Condition
PhotoSee Photo
dia 280
6 module
The machine has Auto Cycle
 
  57
IDMA32910
MakeWMW Heckert ,Germany
ModelZFWVG250 x 2000
YOM1981
ConditionGood Condition
PhotoSee Photo
Workpiece's diameter - 500mm
Milling length - 2000mm
Module - 7
Spindle bore - 102mm
Dimensions - 4250x1650x1700mm
Weight - 4300kg
1982 with accessoirs and 2 heads,gears unit
 
  58
IDMI7179
MakePfauter
ModelP251
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter : 250 mm,
Spindle speed range : 80-500 rpm,
Module : Max 4,
Bore diameter : 68 mm,
Wheel diameter : max 250 mm,
Maximum length with : 250 mm,
Distance between workpiece tool : 10-210 mm,
Opening width : 63 mm,
Diameter of the work piece mandrel : 30 mm,
Diameter of the milling mandrel : 27 mm,
Milling diameter : Max 130 mm,
Milling length : max 130 mm,
Displacement mills : 115 mm,
Axial feedrate : 0,34-4,0 mm/u,
Radial feedrate : 0.08-1,0 mm/u,
Tangential feedrate : 0,16-2,0 mm/u,
Tool taper - MK 4,
Total power requirement : 16 kva,
Dimensions of the machine : 2100 x 1500 x 1900 mm,
Machine Weight : 3,8 ton.
 
  59
IDMA32835
Make
Model5342
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter gears cut - 2000 mm
Working length 500mm
Max. module:
- Steel 15mm
- Cast iron 20mm
Max. work-piece weight: 10 tons
 
  60
IDMI7163
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
3200 mm diameter
 
  61
IDMA32803
MakeErfurt
Model
YOM
ConditionGood Condition
PhotoSee Photo
Modul - 20
Faceplate diameter - 1000mm
Hobbing diameter - upto 1400mm
Weight - 8500kg
 
  62
IDMA32770
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) Producer: WMW
Origin: Germany
New in: N/A
Reference no.: 00-183
Max. diameter: 500 mm
Max. module: 5
Max wheel width: approx. 180 mm
Speed range: 50 200 rpm
Gear width: 250 mm
Min. amount of teeth: 12
Overall dimensions (L x W x H): 2500 x 1900 x 1900 mm
Machine weight: approx. 1600 kg
2) Producer: WMW
Origin: Germany
New in: n/a
Reference no.: 00-184
Max. diameter: 250 mm
Max. module: approx. 2.5
3) Producer: LAMBERT
New in: n/a
Reference no.: 00-185
Max workpiece diameter: 88 mm
Min. workpiece diameter: 2 mm
Max. module: 1,5/2 mm
Tooth Speeds: 4-390
Milling speeds: 270-1440 rpm
Milling length (straight helical teeth): 25-50 mm
Overall dimensions (L x W x H): 1700 x 1200 x 800 mm
Machine weight: approx. 400 kg
 
  63
IDMA32741
MakeTos Czech
ModelFO16
YOM1974-1984
ConditionGood Condition
PhotoSee Photo
Max. milled module: 16
Maximum diameter : 1600 mm
Max. work piece weight: 7000 kg
Clamping table: 1350 mm
Diameters of cutter arbor: 32,40,50,60 mm
Diameter of arbor work: 80 mm
Main motor: 12 kW
Machine dimensions (length x width x height):
4260 x 2255 x 3170 mm
Machine weight: 18 500 kg
Change gears are available; machine with full equipment.
5 pieces available
 
  64
IDMA32737
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter : 500 mm
Max. module : 8 mm
Max. length : 280 mm
 
  65
IDMI7136
MakeTos Czech
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
gear dia 1600 mm, table dia 1350 mm, modul 16,load 7 ton, no of grooves 8, no of feeds 36, spindle rotations 1680 rpm, main motor 15 kw, rapid motor 7,5 kw, weight 21 tons.with tail stock
 
  66
IDMI7135
MakeTos Czech
ModelFO10
YOM
Conditionexcellent working condition
PhotoSee Photo
Max. Module - 10 module
Max. Diameter of Gear - 1000 mm
Table Diameter - 850 mm
- Machine is complete with arbours, mandrels, & change gears
 
  67
IDMI7134
MakeTos Czech
ModelFO10
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel diameter : 1000 mm,
Max module : 10,
Width of work-piece : 400 mm,
( 400 mm width spacer is placed extra under the Tail stock to raise the height),
Table diameter : 850 mm,
Max gear diameter without tailstock : 1200 mm,
Milling diameter : 170 mm,
Milling speed : 20-125 U/min,
Hole in table : 100 mm,
Main motor : 7.5 kW,
Machine dimension : 3120 x 1870 x 2525 mm,
Machine weight : 9 ton.
With tail stock
 
  68
IDMI7133
MakeTos Czech
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
gear dia 1600 mm, table dia 1350 mm, modul 16,load 7 ton, no of grooves 8, no of feeds 36, spindle rotations 1680 rpm, main motor 15 kw, rapid motor 7,5 kw, weight 21 tons.with tail stock
 
  69
IDMA32726
MakeRussian
Model5B370
YOM1970
ConditionGood Condition
PhotoSee Photo
Max dia. wheels: 500 mm.,
Max. workpiece length: 3000 mm.,
Max module: 25,
Machine weight: 28 tons
 
  70
IDMA32703
MakeTos Czech
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
Max. gear wheel module
- max. machining 16
- with normal machine loading 20
Max. gear wheel diameter mm 1600
Max. gear wheel diameter without steady with normal machine loading mm 2000
Max. gear wheel width with straight teeth
- gear wheel diameter above 1350 mm mm 560
- gear wheel diameter below 1350 mm mm 500
Max. distance between spindle and table surface mm 1050
Min. distance between spindle and table surface mm 400
Max. distance between spindle and table mm 1150
Min. distance between spindle and table mm 100
Table diameter mm 1350
Table boring diameter mm 180
Number of T-shaped groove mm 8
Milling arbor diameter mm 32-40-50-60
Number of milling spindle revolutions in R 10 row, =1,26 from-to U/min 16- 80
Main motor power PS 15
Fast motor power PS 7,5
Vertical feed number 36
Vertical feed range with table revolutions from- to mm 0,25- 6
Longitudinal feed number with table revolutions from- to mm 0,05-1,5
Machine surface needed mm 4300 x 2000
Weight with normal equipment kG 18 100
 
  71
IDMA32701
MakeWanderer
Model
YOM
ConditionGood Condition
PhotoSee Photo
Workpiece's lenght - 3000mm
Workpiece's diameter : 180..200mm
 
  72
IDMA32647
Make
Model5B310
YOM
ConditionGood Condition
PhotoSee Photo
Parameter Value
Machine accuracy class according to GOST 8-82 (N, P, B, A, C) P
The largest diameter of the workpiece, mm 200
The largest module gears machined 1.5
Tooth length of the cut wheel, mm
CNC -
Min / Max. Rpm 100 - 1000
Power, kW 2.2
Dimensions, mm 1500_1150_2000
Weight, kg 2200
 
  73
IDMA32618
Make
Model5K310
YOM1974
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter 200 mm,
Module 4,
Table diamerter 200 mm,
Spindle speed 63...400 rpm
Bore taper of the milling carriage (Morse) 4,
Max. tilt angle of the cut wheels teeth, gr. +-/ 60,
Distance between the axes of the table and the cutter 145...365 mm,
Distance between the table surface and the cutter 45...180 mm,
Max. dimensions of hob mounted 125 x 125 mm,
Main electric motor power 4 kW,
Machine overall dimensions 2000 x 1300 x 2040 mm,
Machine weight 4350 kg.
The semiautomatic machine is intended for hobbing cylindrical spur and oblique tooth wheels from pig-iron, the steel alloyed, easy alloys by a method of a rolling in conditions of a batch production.
Equiped with change gears.
 
  74
IDMA32612
MakeRussian
ModelEZ208
YOM1993
ConditionGood Condition
PhotoSee Photo
The maximum diameter cut by the wheels, mm
without kontrpodderzhki: 800
with kontrpodderzhkoy: 450
Maximum module of cut teeth: 6 (8) *mm
Diameter of the table: 475 mm
The maximum angle of inclination of the teeth of cut wheels, hail: +/- 45
The distance between the axes of the table and cutter: 30-475 mm
The distance from the section plane to the cutter axis: 200-515 mm
The maximum dimensions of the installed hobbing cutter, mm:
length: 130
diameter:150
The maximum vertical displacement of support: 315 mm
The cone openings of the milling support (Morse): five
Maximum axial movement of the cutter: 70 mm
milling spindle speed, rev / min: 53,5-250
Feed, mm / min:0.5-5
vertical: -
radial: -
tangential
Main electric motor power: 5.5 kW
Overall dimensions, mm:
length: 2515
width:1302
height: 2025
Weight: 5100 kg
 
  75
IDMA32594
MakeRussian
Model5353
YOM
ConditionGood Condition
PhotoSee Photo
Gear diameter - 500..3200 mm,
Gear width - 1200 mm,
Max modul:
- steel - 30
- cast iron - 35
Mill's diameter - 360 mm,
Mill's length - 425 mm,
Outter diameter of the table - 2400 mm,
Max workpiece's weight - 40000 kg,
Dimensions - 8710 x 4275 x 4850 mm,
Weight - 82500 kg
 
  76
IDMA32577
MakeGleason USA
Model2010CNC
YOM
ConditionGood Condition
PhotoSee Photo
There are 9 such machines available.
Wheel gear diameter - 400mm
 
  77
IDMA32498
MakeRussian
Model5B370
YOM
ConditionGood Condition
PhotoSee Photo
Gear wheels diameter - 50..500 mm
Max. milling lenght of straight-toothed gear wheels - 2500 mm
Max. lenght workpiece - 2800 mm
Max. workpiece weight - 4000 kg
Max. modul - 25
Numbers of teeth - 6..200
Dimensions - 7600 x 2890 x 2170 mm
Weight - 27000 kg
Quantity: 3 nos
 
  78
IDMA32495
MakeWahli
Model96
YOM
ConditionGood Condition
PhotoSee Photo
Centers distance - 80 mm
Cutting length - 50 mm
Cutter diameter - 32 mm
Modul - 1
Weight - 380 kg
Quantity: 50 nos
 
  79
IDMA32441
Make
Model5330
YOM1978
ConditionGood Condition
PhotoSee Photo
Gear's diameter with tailstock - 800mm
Gear's diameter without tailstock - 1500mm
Gear's width - 500mm
Modul - 20
 
  80
IDMA32401
MakeSTANKO
Model5K301P
YOM1974/1978
ConditionGood Condition
PhotoSee Photo
fi max 125mm, max module 2,5 mm
 
  81
IDMA32318
MakeKolomna Russia
Model5342
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter gears cut: 2000 mm,
Working length: 500 mm,
Max. module:
Steel: 15 mm,
Cast iron: 20 mm,
Max. work piece weight: 10 tons
 
  82
IDMA32308
MakeModul
ModelZFWZ250/3
YOM1994
ConditionExcellent
PhotoSee Photo
Max diameter of work-piece: 250 mm
Max module: 6
Max axial feeding travel: 275 mm
Max tangential feeding travel (hob shift): 100 mm
Max helix angle: 45 degree
Min number of teeth cut: 8
Min number of teeth cut using the indexing: 4
WORKPIECE DIMENSIONS
Max hob diameter: 145 mm
Max hob length: 170 mm
Diameter of a tightening surface of a table: 275 mm
Diameter of a centering element of a table: 200 mm
Depth of a centering element of a table: 75 mm
Distance from the hob center to surface of work table:
-Min: 195 mm
-Max: 470 mm
Distance from the hob center to the center of work table:
-Min: 20 mm
-Max: 230 mm
Cone of the hobbing: 45
CAPACITY AND DIMENSIONS
Hob speed: 50-200 rev/min
Hob speed variable in 2 ranges: 125-400 rev/min
Main motor: 7,5 kW
General power consumption: 20 kw
Electricity: 50 Hz 380 V
Machine dimension: 3000x3475x2200 mm
Machine weight: 5500 kg
 
  83
IDMA32237
MakePfauter
ModelP630
YOM1975
ConditionGood Condition
PhotoSee Photo
Max. wheel diameter - 630 mm
Max. module - 10 mm
Table diameter - 550 mm
Gear width - 410 mm
Dimensions: 5980x2915x3430 mm
Total weight: 9000 kg
 
  84
IDMA32157
MakeTOS
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
Wheel diameter : 1600 mm
Module : 16
Spindle speed : 800rpm
Dimensions - 4300x2000 x 3170mm
Weight - 18500kg
 
  85
IDMA32039
MakeTOS
ModelFO16
YOM1967
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 1600 mm
gear width 560 mm
max. module 16
min. module 4
min. wheel diameter 800 mm
table dia. 1350 mm
table load capacity 7000 kg
weight of the machine ca. 18 t
dimensions of the machine ca. m
 
  86
IDMA31868
MakeWMW Modul
ModelZFW800/3
YOM1983
ConditionGood Condition
PhotoSee Photo
For straight, helicoid and tangential gears.
Max. module 14
Max diameter 800 mm.
Table 700 mm
Wheel Width 410 mm
Table Bore 200 mm
Power 19 kW
Dimension 4300 mm x 2000 mm x 2900 mm
Weight 10500 kg
Change gear
 
  87
IDMA31865
MakeHamai,Japan
Model120
YOM
ConditionGood Condition
PhotoSee Photo
Working diameter - 120 mm
Hobbed length - 160 mm
Working length - 210 mm
Module - 2
Dimensions - 1120 x 520 x 1413 mm
Machine weight - 900 kg
Quantity: 3 nos
 
  88
IDMA31827
MakePfauter
ModelP900
YOM
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 900mm
max. module 8mm
max. length of teeth cutting 498mm
control conventional
min. number of teeth 4 / 8
diameter milling arbor max. 60mm
max. milling cutter diameter 195mm
Distance of shafts 50 - 550mm
tool taper MK 5
work table:
table diameter 700mm
boring diameter 100mm
max. table load -kg
feeds:
turning speeds
speeds of tool 62 - 3901/min
total power requirement 16kW
weight of the machine ca. 7,8t
dimensions of the machine ca. 6,0 x 4,0 x 2,5m
 
  89
IDMA31817
MakeWMW
ModelZFWZ 800/3
YOM1983
ConditionGood Condition
PhotoSee Photo
For straight, helicoid and tangential gears.
Max. module 14
Max diameter 800 mm.
Table 700 mm
Wheel Width 410 mm
Table Bore 200 mm
Power 19 kW
Dimension 4300mm x 2000mm x 2900mm
Weight 10500 kg
ACCESSORIES
CHANGE GEARS
SUPPORT
 
  90
IDMA31549
MakeSchiess,German
ModelRFW10S
YOM1968
ConditionGood Condition
PhotoSee Photo
The smallest and largest diameter of the work piece: 200-1400 mm
The largest module processed gears: 30
The greatest length of installed parts 4000 mm
The longest milling length is 2850 mm
The largest weight of the installed workpiece: 15000 kg
The largest angle of inclination of the tooth cut rings 45 degrees
Frequency of rotation of the spindle r / m: 9
Max spindle speed, r / m: 100
Caliper moving speed 200 mm / min
Feed caliper 0.08-4 mm and 0.16-8 mm
Faceplate diameter 900 mm
Height centers over the bed 750 mm
Power 24 kW
The mass of the machine with portable equipment 52000 kg
 
  91
IDMA31515
MakeModul
ModelZRKK 500x10
YOM1971
ConditionGood Condition
PhotoSee Photo
Workpiece's diameter - 500mm
Modul - 10
 
  92
IDMA31514
MakeModul
ModelZFKK 500x10
YOM1971
ConditionGood Condition
PhotoSee Photo
Workpiece's diameter - 500mm
Modul - 10
 
  93
IDMA31385
Make
ModelFO25
YOM1952
ConditionGood Condition
PhotoSee Photo
Max module 25, Max diam. of the gear 2500 mm, Max diam. of the gear with outboard support 1300mm, Distance between axis of a spindle and camping arbor 80-1630mm, Max diam. of the gear by tangential method 10 grades 2400/800mm, Max diam. of the gear by tangential method 60 grades 500/700mm, Max number of teeth with standard change gears 448, Max face over 1500mm diam. of the gear 800mm, Max face under 1500mm diam. of the gear 750mm, Max hob diam. 340mm, Max hob length 500mm, Revolutions steps 8, Revolution of hob per min 12, 5-63, Table surface diam. 1500mm, The main motor power 14kW,
No Tailstock.
 
  94
IDMA31295
MakeWMW
ModelZFWZ800 x 10
YOM
ConditionGood Condition
PhotoSee Photo
Maximum Wheel Diameter : 800mm
Maximum Gear Width : 410mm
Maximum Module : 10 Mod
Maximum Hob Diameter : 195mm
Table Diameter : 700mm
Turning Speed Range : 40-280 U/Min.
Power Capacity : 12.5 Kw
Voltage/Frequency : 220/50 V/Hz
Feed-Axial : 0.2-8 mm/min.
Feed-Radial : 0.1-2 mm/min.
Feed-Tangential : 0.1-2 mm/min.
Machine weight : 7000kg
Accessories:
Set of change gears
2 arbors
41pcs hob cutter different modul
One support
 
  95
IDMA31285
MakeKolomna Russia
Model5A342
YOM1970
ConditionGood Condition
PhotoSee Photo  |  See Video
Gear hobbing machine model 5342
Manufacturer: KOLOMNA (Russia)
Year of manufacture: 1970
Main technical data:
Max gear diameter : 2000 mm
Max module : 25
Max hobbing length of 500 mm
Table diameter : 1800 mm
Maximum table load : 10 t
Main motor power : 14 kW
Overall dimensions(LxWxH) : 6910x2990x3462 mm
Weight of the machine : 31800 kg
Accesories:
Set of change gears ab. 80pcs;
Aditional hobbing head tooth by tooth
One arbor
2pcs. supports
The machine was refurbished. Mechanical revision. Gears checked. New painting. The electrical equipment is new one
 
  96
IDMI6969
MakeTOS
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
Diameter : 1600 mm
Module : 16
With :
Change gears, works Support, Internal Head, Other accessories.
 
  97
IDMI6968
MakeTOS
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
Max. dia of workpiece : 1600 mm,
Max. Modul : 16 mm,
dia of milled wheel : 1600 mm,
Main motor power : 12 kW,
Overall Dimensions : 4260 x 2255 x 3170 mm
 
  98
IDMA31118
MakeModul
ModelZRKK 500x10
YOM1971
ConditionGood Condition
PhotoSee Photo
Control panels are fixed on the machines.
Passports are available.
Indexing plates, gear heads, tools for them are available.
Year of manufacturing - 1971
Workpiece's diameter - 500mm
Modul - 10
 
  99
IDMA31117
MakeModul
ModelZFKK 500x10
YOM1971
ConditionGood Condition
PhotoSee Photo
Control panels are fixed on the machines.
Passports are available.
Indexing plates, gear heads, tools for them are available.
Year of manufacturing - 1971
Workpiece's diameter - 500mm
Modul - 10
 
  100
IDMA31059
MakePfauter
ModelP900
YOM1973
ConditionGood Condition
PhotoSee Photo
Max. diameter of piece : 900 mm
Wheel diameter : 900 mm
Gear width : 500 mm
Max. module : 8/10
Min. module : 1
Table diameter : 700 mm
Dimensions : 5980x2915x3430 mm
Weight of the machine : 8500 kg
 
  101
IDMA30971
MakePfauter
ModelP1501
YOM
ConditionGood Condition
PhotoSee Photo
Change gears are available.
Wheel diameter - 1500mm
Gear width - 600mm
Module - 16
Table diameter - 1200mm
Dimensions - 7500x3500x4700mm
Weight - 20500kg
 
  102
IDMA30767
Make
Model
YOM
Condition
PhotoSee Photo
MODUL ZFWZ-3150/30
Diameter of processing up to 3150mm,
module 30.
Machine weight 80 tons
The machine is in perfect working condition, there is no working out at all, practically did not work, guides without scratches. There are no attachments for repair and modernization - "turn on and work". In the presence - a rear post, replaceable gears - 100% on the passport, mandrels, documentation. connected.
 
  103
IDMA30759
MakePfauter,German
Model
YOM1981
Conditioncan be inspected under power
PhotoSee Photo
Model- P403, Max. Gear / Workpiece swing 400/500 mm

Hobbing length 310 mm
Module, max. 6/8

Minimum no. of teeth 6
Distance between tool and workpiece axis 20 - 340 mm
Mounting height in counter bracket, approx. 475 mm

Table - 400 mm
Table bore 80 mm
Hobbing slide swivelling approx. 240

Hob x length 163 x 280 mm
Hob mandrel x taper 27 x MK 5
Hob shifting, max. approx. 170 mm

Hob spindle speeds, infinitely variable 40 - 240 rpm
Feed range, axial, infinitely variable 0.42 2,40 mm/rev
radial, infinitely variable 0,10 1,9 mm/rev
tangential, infinitely variable 0,18 3,15 mm/rev

Spindle drive, approx. 11 kW
Total electrical load, approx. 20 kW - 380 V - 50 Hz
Weight of machine, approx. 7,000 kg

Accessories / Special Features
* Universal hobbing head. Automatic hob shifting. Shift adjustment can be preset via an
electric counter mechanism.
* 2-cut device for roughing and finishing Hobbing whereby the second cut can be in the
same or in the opposite direction. Hobbing values for each cut can be entered and preset
via various potentiometers. Hobbing depths are set by cams and limit switches.
* Crowning Device via Copy Hobbing Equipment for crowned or tapered Gears.
* Automatic run-out device for higher cutting values for plunge-cut / run-out.
* Hydraulic climb cutting device built in the column.
* Radial / axial quick feed and table quick feed.
* Differential gear drive for helical gears.
* Approx. 60 change gears. * 3 hob mandrels, various sizes.
* Continuously lubricated counter bearing for hob arbor.
* Coolant equipment with chip conveyer.
 
  104
IDMA30758
MakePfauter,German
ModelP251
YOM1979
Conditioncan be inspected under power
PhotoSee Photo
Max. gear 250 mm
Module, max. 4 / 6
Hobbing width 240 mm
Max. length of workpiece, approx. 500 mm
No. of teeth, min./max. 2 / 250
Table 250 mm
Table bore, approx. 63 mm

Hob carriage, swivelling 240
Hob size 130 x 160 mm
Hob shifting, max. 115 mm
Hob spindle speeds 70 500 rpm

Feed range, axial 0.32 4 mm/WP rev
Feed range, radial 1 - 50 mm/Min.
Feed range, tangential 0.16 2 mm/WP rev

Total electrical load, approx. 11 kW - 380 V - 50 Hz
Weight, approx. 3,600 kg

Accessories / Special Features
* Automatic hob shifting. Shift travel, number of workpieces, and total shift travel with
switch-off of machine can be preset.
* Selection switch for various hobbing programmes.
* Steplessly variable hob spindle speeds and stepless Radial Infeed by DC Motor
* Differential drive for helical teeth. Four-start index gear ratio (ZZ=2).
* 2-cycle hobbing process for roughing and finishing procedure with preadjustable
values for hobspeed and radial infeed rates.
* device for deburring the workpiece during hobbing process mounted on counter column
* Increased feeds and speed at beginning and end of cut.
* Crowning device, using a template device on the hobbing column, for crowned and conical gears.
* Coolant equipment with chip conveyor and complete splash shields.
* Hydraulic Power Clamping device mounted on table, 50 change gears, mandrels, etc.
 
  105
IDMI6888
Make
Model
YOM
Condition
PhotoSee Photo
6 module, standard size 450
 
  106
IDMI6886
MakeCooper Pfauter
ModelP251
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel diameter: 250 mm
Max wheel width: 242 mm
Max module: 6 mm
Min number of teeth: 2
Milling cutter diameter x width: 130x155 mm
Adjustment of milling-spindle: 115 mm
Milling slide swivelling: 240 mm
Table diameter: 250 mm
Table hole: 63 mm
Electrics-voltage/frequency: 380 / 50 V/Hz
Distance table / counter stay 565 mm
Distance table / middle of spindle 380 mm
Center distance between workpiece-tool min/max.: 10 - 210
Main drive: 6,6 kW
Main motor: 13,6 kW
Dimensions: 2800x1900x2500 mm
Weight of machine: 3600 kg
 
  107
IDMI6885
MakePfauter,German
Model
YOM
Condition
PhotoSee Photo
Max. Gear , With/Without Counter Bracket 200 / 250 Mm
Module 2.5 / 3
Hobbing Length 160 Mm
Max. Length Of Workpiece 300 Mm
Table 150 Mm
Table Bore, Approx. 55 Mm
Hob Carriage, Swivelling 180
Hob Size 65 X 90 Mm
Hob Shifting, Max. 90 Mm
Hob Spindle Speeds 140 450 Rpm
Feed Range, Axial 0.25 3 Mm/Rev
Feed Range, Radial 0.16 0.96 Mm/Rev
Feed Range, Tangential 0.065 0.785 Mm/Rev
Total Electrical Load, Approx. 5 Kw - 380 V - 50 Hz
Weight, Approx. 1,100 Kg
* Universal Hobbing Head With Various Hob Mandrels.
* Radial / Axial Quick Feed, Motor-Driven, With Automatic Switch To Radial Feed.
* Differential Drive For Helical Teeth.
* Drive For Tangential Hobbing Head (For Worm Gears), At Front Of Machine.
* Approx. 30 Assorted Change Gears. Mandels
* Central Lubrication.
 
  108
IDMA30496
MakeTOS
ModelFO10
YOM
ConditionVery good condition
PhotoSee Photo
MAX WHEEL DIAMETER: 1000 MM
MAX MODUL: 10
WIDTH OF WORKPIECE: 400 MM
TABLE DIAMETER: 850 MM
MAX GEAR DIAMETER WITHOUT TAILSTOCK: 1200 MM
MILLING DIAMETER: 170 MM
MILLING SPEED: 20-125 U/MIN
HOLE IN TABLE: 100 MM
MAIN MOTOR: 7.5 KW
MACHINE DIMENSION: 3120x1870x2525 MM
MACHINE WEIGHT: 9 TON
CHANGE GEARS AVAILABLE
 
  109
IDMA30464
MakeKashifuji
ModelCU1000-1112
YOM
ConditionGood Condition
PhotoSee Photo
Maximum length of template: 210 mm,
Maximum traverse of template: 210 mm,
Feed ratio between hob saddle and template: 1:1-4:1
Maximum traverse of table saddle by hydraulic coping device: 25 mm,
Maximum traverse of table saddle by hydraulic piston: 40 mm,
Capacity of hydraulic oil tank: 20.1
Hydraulic pump motor: 0.4 KW
 
  110
IDMI6738
MakeRussian
Model
YOM
ConditionGood Condition
PhotoSee Photo
Module. 1.5 to 6.
 
  111
IDMI6723
MakeTos Czech
ModelFO6
YOM
ConditionGood Condition
PhotoSee Photo
Max Gear dia : 600 mm,
Module : 8.
 
  112
IDMA30100
MakeSchiess,German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Gear Diameter : 3000 mm.
 
  113
IDMA30047
MakeTos Czech
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
Max. dia of workpiece : 1600 mm,
Max. Modul : 16 mm,
dia of milled wheel : 1600 mm,
Main motor power : 12 kW,
Overall Dimensions : 4260 x 2255 x 3170 mm,
Machine Weight : 18.5 Tons.
 
  114
IDMA29791
MakeRussian
Model53A11
YOM
ConditionGood Condition
PhotoSee Photo
Max work piece diameter : 1250 mm,
Table diameter : 1000 mm,
Module : 16,
Max helix angle of gear hobbed degree + - / 45,
Distance between table and cutter axes : 100...750 mm,
Distance between table surface and hob axes : 235...835 mm,
Max diameter of hob mounted : 225 mm,
Max length of hob mounted : 250 mm,
Max vertical travel of hob slide : 650 mm,
Taper of hole in hob slide : 6,
Maximal hob axial travel : 245 mm,
Spindle speed : 28...270 rpm,
Main drive power : 15 kW,
Machine dimensions : 4020 x 2350 x 2780 mm,
Machine Weight : 17900 kg.
 
  115
IDMA29629
MakeKolomna Russia
Model5A342P
YOM1979
ConditionDismantled,Excellent condition,
PhotoSee Photo
Max diameter gears cut : 2000 mm,
Max vertical moving of milling support : 900 mm,
Max module of processed wheel (not less) :
Module worm mill : 20,
Module disk mill : 25,
Module manual mill : 30,
Table diameter : 1800 mm,
Max work-piece weight : 20 ton,
Max corner : +/- 45 degree,
Diameter of installed worm mills : 300...500 mm,
Amount of cutting teeth : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 Hz, 380 V,
Main motor power : 20 kW,
Overall dimension (L x W x H) : 8600 x 4440 x 3700 mm,
Machine weight : 32040 kg 31800.
Equipped with tail stock.
 
  116
IDMA29621
MakePfauter,German
ModelRA200
YOM
ConditionGood Condition
PhotoSee Photo
Diameter of workpiece : 240 mm,
Diameter of boring : 90 mm,
Max diameter of milling cutter : 130 mm,
Max width of milling cutter : 180 mm,
Diameter of milling arbor : 32 mm,
Max / min distance between center line of milling cutter and workpiece : 175/40,
Morse taper : 4,
Max shift of milling cutter : 145 mm,
Mailling cutter : 125-140, 160-180 rpm,
Axial feed : 8-120 mm/min,
Overall dimensions : 5480 x 1900 x 2375 mm,
Weight : 6500 kg.
Change Gears : 60 PZ.
 
  117
IDMA29620
MakePfauter,German
ModelP400
YOM
ConditionGood Condition
PhotoSee Photo
WORKING CAPACITY :-
Max. module to cut : 6 mm,
Max. diameter of piece : 400 mm,
Max. hobbing length (max. hob slide travel) : 300 mm,
Min. nr. of teeth to be hobbed (machine with single start index drive) : 6,
DIMENSIONS :-
Diameter of piece-holder table : 400 mm,
Diameter of the table bore : 80 mm,
Diameter of piece-holder spindle : 36 mm,
Max. size of hob : diameter : 160 mm - length : 160 mm,
Diameter of the hob arbors :
with normal accessory : 32, 40 mm,
with special accessory : 27, 50 mm,
Centre distance between hob and workpiece :-
max. centre distance : 300 mm,
min. centre distance : 30 mm,
Morses cone : 4,
Max. hob shifting :
tangential hobbing: 120 mm,
- shifting : 100 mm,
NUMBER OF ROUND AND FEEDS :-
Hob rpm : 80-500 rpm,
Axial feed : 0.4-4.9 mm/min,
Radial feed : 0.1-1.22 mm/min,
Tangential feed : 0.17-2.1 mm/min,
ELECTRIC EQUIPMENT :-
Voltage : 220/380 V,
Frequency : 50 Hz ,
Total input : 17 kW,
WEIGHT AND DIMENSIONS :
Weight of machine : 5200 kg,
Length : 2850 mm,
Width : 1800 mm,
Height : 1800 mm,
CHANGE GEARS 85 PC.
 
  118
IDMI6527
MakeBarber Colman
Model16-16
YOM
ConditionGood Condition
PhotoSee Photo
Max Gear Diameter : 400 mm,
With Change Gears and arbors.
 
  119
IDMA29573
MakeKolomna Russia
Model5343
YOM1985
ConditionGood Condition
PhotoSee Photo
Max. Diameter of cylindrical gears: 3150 mm,
Maximum hob slide vertical travel: 1400 mm
Maximum module: 32
Number of tooth: 20...1800.
Maximum mass of workpiece accommodated : 45000kg
 
  120
IDMA29568
MakeKolomna Russia
Model5A342P
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter gears cut : 2000 mm,
Max vertical moving of milling support : 900 mm,
Max module of processed wheel (not less) :-
-Worm mill : 20,
-Disk mill : 25,
-Manual mill : 30,
Table diameter : 1800 mm,
Max work-piece weight : 20 ton,
Max corner : +/- 45 degree,
Diameter of installed worm mills : 300...500 mm,
Amount of cuting teeths : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 Hz, 380 V,
Main motor power : 20 kW,
Overall dimension (LxWxH) : 8600 x 4440 x 3700 mm,
Machine weight : 32040 kg.
 
  121
IDMA29498
MakeRussian
Model5A342P
YOM
ConditionGood Condition
PhotoSee Photo
Working diameter: 2000 mm,
Modul: 20,
Max workpiece weight: 20000 kg,
Dimensions: 8600 x 4440 x 3700 mm,
Weight: 32040 kg.
 
  122
IDMA29434
MakeKolomna Russia
Model5342
YOM1970
ConditionGood Condition
PhotoSee Photo
Max. gear diameter: 2000 mm,
Max. module: 25,
Max. hobbing length of: 500 mm,
Table diameter: 1800 mm,
Maximum table load: 10 ton,
Main motor power: 14 kW,
Overall dimensions (L x W x H): 6910 x 2990 x 3462 mm,
Weight of the machine: 31800 kg,
Accessories:
Set of change gears ab: 80 pcs,
Additional hobbing head tooth by tooth,
One arbor,
2 pcs supports.
 
  123
IDMA29390
MakeWMW Modul
ModelZFWZ3150x30
YOM
ConditionGood working condition
PhotoSee Photo
Max machining diameter: 3150 mm,
Modul: 30,
Table diameter: 2400 mm,
Table capacity: 30000 kg,
Main motor power: 70 kW,
Dimensions: 6785 x 5400 x 4820 mm,
Weight: 80000 kg,
Quantity: 2 nos.
 
  124
IDMA29385
MakeLiebherr
ModelLN350
YOM1973
Conditionworking condition ,under power
PhotoSee Photo
Maximum diameter pieces: 350 mm
Module: 10
Automatic cycle 2 passes (Both cycle has speed variable on the cuts)
Wheels divisions
Heavily Equipped
Lots of change gears
Arbours
Hydrulic clamps
The machine has also has an feature of
1) Crowing
2) Taper
3) Copying

Dimension: 4000 x 3000 x 2300mm
Weight: 14 t
Quantity: 16 units
 
  125
IDMA29364
MakeKoepfer
Model153B
YOM1989
ConditionGood Condition
PhotoSee Photo
Max module: 2
Max work-piece diameter:
-With automatic loading: 100 mm
-Without automatic loading: 142 mm
Max hobbing length: 150 mm
Max length of work-piece:
-With automatic loading: 220 mm
-Without automatic loading: 300 mm
Center distance to work-piece cutter:
-Min: 4 mm
-Max: 87 mm
Hob slide swivable: +/- 35 degrees
Min number of teeth: 4
Cutting tool:
-Max diameter: 70 mm
-Max length: 71 mm
-Max shift: 44 mm
Hobbing speed: 280-2240 rpm
Plunge feeds: 0.2 - 150 mm/min
Longitudinal feeds: 0.05 - 2.5 mm/rev
Electricity: 6 kW; 380 V; 50Hz
Dimension: 1690x1410x1640 mm
Machine weight: 3000 kg
 
  126
IDMA29344
MakeWMW Modul
ModelZFWZ250/2,5
YOM1965/1967
ConditionGood Condition
PhotoSee Photo
Change gears are available.
Wheel diameter - 250mm
Wheel width - 120mm
Modul - 2,5
Motor power - 2,5kW
Weight - 1400kg,
Quantity: 2 nos
 
  127
IDMA29304
MakeWMW Modul
ModelZFWZ250x5
YOM
ConditionGood Condition
PhotoSee Photo
Maximum dia: 250 mm,
Maximum gear width: 275 mm,
Max. module:5,
Max. angle of teeth : 45 degrees,
Max. tool dia: 145 mm,
50-400 rpm of the tool,
Table dia: 300,
Power: 15,5 kW,
Machine weight: 5200 kg.
 
  128
IDMA29266
MakeKuratsu
ModelGHM10A
YOM1975
ConditionGood Condition
PhotoSee Photo
Max Dia φ1400,
Support attached φ1000,
M16 T : 1000 Hob dice up-down 550.
 
  129
IDMA29260
MakePfauter,German
Model
YOM1975
ConditionGood Condition
PhotoSee Photo
Max. module: 3,5
Max work piece's diameter: 250 mm,
Table's diameter: 150 mm,
Dimensions: 1605 x 1015 x 1607 mm,
Weight: 1040 kg.
 
  130
IDMA29159
MakeLiebherr
ModelL1500
YOM
ConditionGood Condition
PhotoSee Photo
max. wheel diameter: 1600 mm
gear width: 540 mm
max. module: 12 / 15
table surface area: 1370 mm
centre distance of the spindles min./max.: 95/885 mm
hobber- respectfully worm diameter max.: 245 mm
table bore diameter: 200 H6, MK6 mm
feeds - axial: 0,6-9 mm/U
feeds - radial: 0,2-12 mm/min
feeds - tangential: 0,31-4,5 mm/U
turning speed range: 29-174 U/min
electrics - voltage/frequency: 380/50 V/Hz
main drive motor: 23 kW
weight of the machine ca.: 18 t
dimensions of the machine ca.: 3,6 x 6,7 x 2,8 m
Equipped with tooling
 
  131
IDMA29055
MakeWMW Modul
ModelZFWZ1500x15
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter : 1500 mm,
Table Diameter : 1000 mm,
Max Modul : 15.
 
  132
IDMA29052
MakeRussian
Model5353
YOM1959
ConditionGood Condition
PhotoSee Photo
Gear diameter - 500..3200 mm,
Gear width - 1200 mm,
Max modul:
- steel - 30
- cast iron - 35
Mill's diameter - 360 mm,
Mill's length - 425 mm,
Outter diameter of the table - 2400 mm,
Max workpiece's weight - 40000 kg,
Dimensions - 8710 x 4275 x 4850 mm,
Weight - 82500 kg
 
  133
IDMA29051
MakeRussian
Model5355M
YOM1960
ConditionGood Condition
PhotoSee Photo
Dia: 5000 mm,
Modul: 40,
Outer diameter: 800-5000 mm,
Module for gear cut by worm mill: 30 for steel,
Module for gear cut by worm mill: 40 for cost iron,
Module for gear cut by disc mill: 45 for steel,
Module for gear cut by disc mill: 50 for cost iron,
Max. width of geers: 2000 mm,
Max. mill length: 500 mm,
Max. will diameter: 400 mm,
Table diameter: 4000 mm,
Table hole: 800 mm,
Max. work piece weight: 60 ton,
Number of spindle speed: 16,
Milling spindle RPM: 10-56,
Main motor: 20 kW,
Dimensions: 10915 x 7600 x 6310 mm,
Weight: 166 ton.
 
  134
IDMA29019
MakeKolomna Russia
Model5A342P
YOM
ConditionGood Condition
PhotoSee Photo
Working diameter: 2000 mm,
Module: 20,
Max. work pieces weight: 20000 kg,
Dimensions: 8600 x 4440 x 3700 mm,
Weight: 32040 kg
 
  135
IDMA28960
MakeKolomna Russia
Model5A370
YOM
ConditionGood Condition
PhotoSee Photo
Maximum diameter of the workpiece : 500 mm,
The largest module machined gears : 25,
Min spindle speed : 10 r/m,
Max spindle speed : 100 rev/m,
Power : 19 kW,
Dimensions : 7600 x 2890 x 2170 mm,
Machine weight with external equipment : 27000 kg.
 
  136
IDMA28838
MakePfauter,German
ModelP400
YOM
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter:400 mm,
Max. module:8,
Max. travel of mill holder slide:310 mm,
Min number of cutting gears:6,
Diameter of work piece holder table:400 mm,
Bore diameter of table:80 mm,
Diameter of work piece holder spindle:36 mm,
Max. dimensions of milling cutter:
Diameter:160 mm,
Length:160 mm,
Diameter of spindle mill holder:
With normal accessory:32,40 mm,
With special accessory:22,27,50 mm,
Centre distance between milling and work piece:
Max. centre distance: 290 mm,
Min centre distance:20 mm,
Cone morse:4,
Max. moving of milling cutter:
Tangential cut:126 mm,
Shifting:120 mm,
Milling cutter speed:80-500 rpm,
Axial feed:0,4-7,5 mm/min,
Radial feed:0,1-1,9 mm/min,
Tangential feed:0,16-3 mm/min,
Voltage:220/380 V,
Frequency:50 Hz,
Dimensions:
Length:4680 mm,
Width:2395 mm,
Height:2515 mm,
Weight of machine:6200 kg.
 
  137
IDMA28835
MakeWMW,Germany
ModelZFWZ5000 x 40/I
YOM1988
ConditionGood Condition
PhotoSee Photo
Max. working diameter:5000 mm,
Module:40 mm.
 
  138
IDMA28754
MakeRussian
Model5343P
YOM1987 / 1992
ConditionDismantled,Good condition
PhotoSee Photo
gear dia capcity 3200 mm, min gear dia capacity 1900 mm, dia of external gear machines 500 mm, module of gear machined : with hob 30 mm, with module milling cutter 35 mm, length of milling : with vertical feed 1200 mm, with radial feed 1350 mm, tooth helix angle +- 45 deg, mass of gear blank machined (including fixture) 40 tons, dia of table working surface 2800 mm, dia of table hole 650 mm, number of T slots : radial 6, parallel 12, distance between table surface and tool spindle axis : min 700 mm, max 2100 mm, aggregate power of electric motors installed 40kW, machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 94 tons
 
  139
IDMA28726
MakeLorenz
ModelE16
YOM1965
ConditionGood Condition
PhotoSee Photo
Modul: 10 mm,
Complete with 65 gear changer
 
  140
IDMA28681
MakePfauter,German
ModelRA200
YOM1972
ConditionGood Condition
PhotoSee Photo
Wheel dia : 203 mm,
Max. helix angle of tooth : 40 degree,
Min. number of teeth to be hobbed, -Standard (1-start index drive): 6(9), -Special (2-start index drive): 4,
Max. number of teeth to be hobbed : 48(72),
DIMENSIONS: Center distance between workpiece and hob, - Min.: 11 mm, - Max.: 140 mm,
Diameter of work table : 220 mm,
Diameter of table bore : 62 mm,
Bore of table bushing : 72 mm,
Diameter of hob arbors (1 included with machine) : 21 mm, 24 mm, 19 mm, 11 mm,
Hob spindle taper : Morse 4,
Max. hob dimensions : - Diameter : 124 mm, Length : 176 mm,
Max. hob shift-manual or automatic : 110 mm,
Hob speed-adjustable from : 80 - 500 R.P.M.
ELECTRIC SPECIFICATIONS Voltage (standard) : 220/380 volts,
Frequency (standard) : 50 Hz,
Rated output of main motor : 10 HP,
Total power consumption Of machine : 16.5 kVA,
Dimensions of the machine : 3600 x 2000 x 2400 mm,
WEIGHT AND SPACE REQUIRED : Weight of the machine : 7 ton.
 
  141
IDMA28631
MakeRussian
Model5B370
YOM1969 / 1981
ConditionGood Condition
PhotoSee Photo
Diameter of gear machine :-
minimum : 50 mm,
maximum : 500 mm,
Maximum length of pinion machine : 2800 mm,
Maximum module of gear machine :-
with hob : 20 mm,
with module milling cutter : 25 mm,
Number of teeth machine :-
minimum : 6 mm,
maximum : 200 mm,
Maximum tooth helix angle : +-45 deg,
Taper of milling spindle hole : 6 morse,
Distance between milling and workhead spindle axes :-
minimum : 60 mm,
maximum : 382 mm,
Distance between milling spindle axis and three jaw chuck face :-
minimum : 400 mm,
maximum : 3200 mm,
Diameter of faceplate : 500 mm,
Diameter of workhead spindle bore : 180 mm,
Maximum dimensions of cutting tool :-
diameter : 250 mm,
length : 300 mm,
Diameter of milling arbors : 40,50,60 mm,
Range of milling spindle rotation frequencies : 10-100 min-1,
Range of hob feeds per workpiece revolution : 0.24-12.2 mm,
Range of module milling cutter feeds per its revolution :-
universal carriage : 0.14-7.2 mm,
coarse machining carriage : 0.05-2.4 mm,
Range of formed end mill feeds per its revolution : 0.025-1.2 mm,
Number of electric motors installed : 6,
Main drive DC motor :-
power : 19 kW,
rotation frequency : 300-1500 min-1,
Aggregate power of electric motor installed : 27.17 kW,
Machine overall dimensions L x W x H : 7600 x 2890 x 2170 mm,
Weight of machine : 27000 kg.
Qty : 2 nos.
 
  142
IDMA28605
MakeKolomna Russia
Model5A342
YOM1966
Conditiongood mechanical condition
PhotoSee Photo
Max diameter : 2000 mm,
Max vertical moving of milling support : 900 mm,
Max module of processed wheel (not less) :-
Module worm mill : 20,
Module disk mill : 25,
Module manual mill : 30,
Table diameter : 1800 mm,
Max work-piece weight : 20 ton,
Max corner : +/- 45 degree,
Diameter of installed worm mills : 300...500 mm,
Amount of cutting teeth : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 Hz, 380 V,
Main motor power : 20 kW,
Overall dimension (L x W x H) : 8600 x 4440 x 3700 mm,
Machine weight : 32040 kg 31800,
Diameter capacity : 2000 mm;
Maximum module : 20 mm;
Length of the gear : 560 mm;
Limits of spindle RPM, Min/Max : 7800/100,
Main motor power : 15 kW,
Dimensions : 6910 x 2990 x 3460 mm.
Weight : 31800 kg.
 
  143
IDMA28599
MakeWMW Modul
ModelZFWZ3150x30/I
YOM
ConditionGood working condition
PhotoSee Photo
PREPARATION :-
Max. diameter without the holder : 3150 mm,
Max. diameter with the holder : 1600 mm,
Min. diameter : 500 mm,
Min. width of a tooth : 1000 mm module 30,
Max. corner of an inclination of a tooth : 45 degree,
Max. rearranging of a tangential pusher : 500 mm,
MILL :-
Max. diameter : 350 mm,
Max. length : 440 mm,
TIGHTENING A TABLE :-
Diameter : 2400 mm,
Aperture : 500 mm,
Depth of an aperture : 1100 mm,
The greatest loading : 30 ton,
Vertical distance between the middle : 700-1900 mm,
SPEEDS :-
Hob turning speeds : 12,5 - 71 U/min,
Feeds axial : 0-16 mm/U,
Feeds - radial : 0-7, 1 mm/U,
Feeds - tangential : 0-8,0 mm/U,
MILLS AND A SURFACE OF A TABLE :-
Horizontal distance between the middle : 300-1800 mm,
SET :-
Control system : 6000 kg,
Table : 10000 kg,
Bed : 8000 kg,
Bottom part of bed : 9000 kg,
The main rack with ladder : 15000 kg,
The back rack : 10000 kg,
Pusher of rack : 6000 kg,
Box with change gears : 1300 kg,
Additional details : 4000 kg,
Box with equipment for installation of preparation for the machine : 1500 kg,
Tanks : 2000 kg,
Electricity box : 900 kg,
Hidrostation : 500 kg,
Electrical specifications : 380 V, 220V, 50 Hz, 3 MP,
Main motor : 70 kW,
Dimensions : 6785 x 5400 x 4820 mm,
Weight : 65 tons.
 
  144
IDMA28566
MakeKolomna Russia
Model5A342
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter : 2000 mm,
Max vertical moving of milling support : 900 mm,
Max module of processed wheel (not less) :-
Module worm mill : 20,
Module disk mill : 25,
Module manual mill : 30,
Table diameter : 1800 mm,
Max work-piece weight : 20 ton,
Max corner : +/- 45 degree,
Diameter of installed worm mills : 300...500 mm,
Amount of cutting teeth : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 Hz, 380 V,
Main motor power : 20 kW,
Overall dimension (L x W x H) : 8600 x 4440 x 3700 mm,
Machine weight : 32040 kg 31800,
Diameter capacity : 2000 mm;
Maximum module : 20 mm;
Length of the gear : 560 mm;
Limits of spindle RPM, Min/Max : 7800/100,
Main motor power : 15 kW,
Dimensions : 6910 x 2990 x 3460 mm.
Weight : 31800 kg.
 
  145
IDMI6307
MakeTos Czech
ModelFO6
YOM
ConditionGood working condition
PhotoSee Photo
Maximum Gear Dia: 600 mm
Table Dia: 420 mm
Max. Module: 6
 
  146
IDMA28440
MakePfauter,German
ModelP251
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter : 250 mm,
Spindle speed range : 80-500 rpm,
Module : Max 4,
Bore diameter : 68 mm,
Wheel diameter : max 250 mm,
Maximum length with : 250 mm,
Distance between workpiece tool : 10-210 mm,
Opening width : 63 mm,
Diameter of the work piece mandrel : 30 mm,
Diameter of the milling mandrel : 27 mm,
Milling diameter : Max 130 mm,
Milling length : max 130 mm,
Displacement mills : 115 mm,
Axial feedrate : 0,34-4,0 mm/u,
Radial feedrate : 0.08-1,0 mm/u,
Tangential feedrate : 0,16-2,0 mm/u,
Tool taper - MK 4,
Total power requirement : 16 kva,
Dimensions of the machine : 2100 x 1500 x 1900 mm,
Machine Weight : 3,8 ton.
 
  147
IDMI6297
MakeCugir,Romania
ModelFD500
YOM
ConditionGood Condition
PhotoSee Photo
Max. Hobbing Dia : 500 mm,
Max. Module : 8 mm.
 
  148
IDMI6296
MakeTos Czech
ModelOF45
YOM
ConditionGood Condition
PhotoSee Photo
Max Gear Die : 450 mm,
Module : 6,
Max Face width of spur gear cut : 250 mm,
Dia of Work Table : 500 mm,
Bore in work table : 100 mm,
Dia of work clamping mandrel : 40 mm,
Max. Number of teeth of cut gear : 200,
Minimum number of teeth ct gear : 8,
Max. Dia of Hob/length : 160/160,
Taper of Hob Spindle : Morse 5,
Main Motor : 5.5 kw,
Machine Weight : 5800 kgs.
 
  149
IDMI6295
MakeTos Czech
ModelFO6
YOM
ConditionGood Condition
PhotoSee Photo
Max Gear dia : 600 mm,
Module : 6.
 
  150
IDMA28351
MakeKolomna Russia
Model5342
YOM1968
ConditionGood Condition
PhotoSee Photo
Max work piece diameter : 2000 mm,
Max work piece length : 500 mm,
Table diameter : 1800 mm,
Max work piece weight : 10000 kg,
Module : 20,
Max diameter of installed worm mills : 300 mm,
Max length of installed worm mills : 500 mm,
Main motor power : 14 kW,
Machine Weight : 32000 kg.
 
  151
IDMA27988
MakeKolomna Russia
Model5A342P
YOM1988
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter: 2000 mm,
Max. work piece diameter with tail stock: 1200 mm,
Min work piece diameter: 200 mm,
Max. vertical moving of milling support: 900 mm,
Distance between hob axis and table axes : 150...1245 mm,
Distance between hob axis and table surface; 580-1480 mm,
Table diameter: 1800 mm,
Spindle speed range: 8-125 rpm,
Spindle speeds: 25 qty,
Vertical feeds quantity: 18 qty,
Horizontal feeds quantity: 18 qty,
Min processes wheel teth: 20 qty,
Max. module: 25,
max. module with worm hob: 20,
Max. gear teeth angle degree: 45,
Max. work piece weight: 20000 kg,
Max. diameter of installed worm mills: 300 mm,
Max. length of installed worm mills: 500 mm,
table opening diameter: 250 mm,
worm pitch wheel diameter: 1650 mm,
Teeth quantity of pitch wheel: 165 qty,
Voltage: 380,
Frequency: 50 Hz,
Main motor power: 15 kW,
Machine dimensions: 6910 x 4440 x 3700 mm,
Machine weight: 31800 kg.
 
  152
IDMA27887
MakeRussian
Model5K32A
YOM1966
ConditionGood Condition
PhotoSee Photo
Table diameter: 800 mm,
Module: 10
 
  153
IDMA27886
MakeRussian
Model5K32
YOM1974
ConditionGood Condition
PhotoSee Photo
Table diameter: 800 mm,
Module: 10
 
  154
IDMA27872
MakeTos Czech
ModelFO25
YOM
ConditionGood Condition
PhotoSee Photo
Max module 25, Max diam. of the gear 2500 mm, Max diam. of the gear with outboard support 1300mm, Distance between axis of a spindle and camping arbor 80-1630mm, Max diam. of the gear by tangential method 10 grades 2400/800mm, Max diam. of the gear by tangential method 60 grades 500/700mm, Max number of teeth with standard change gears 448, Max face over 1500mm diam. of the gear 800mm, Max face under 1500mm diam. of the gear 750mm, Max hob diam. 340mm, Max hob length 500mm, Revolutions steps 8, Revolution of hob per min 12, 5-63, Table surface diam. 1500mm, The main motor power 14kW,
No Tailstock.
 
  155
IDMA27817
MakeKolomna Russia
Model5A342P
YOM1978
ConditionGood Condition
PhotoSee Photo
Max.work piece diameter : 2000 mm,
Max. vertical moving of milling support : 900 mm,
Distance between spindle axis and table : 200...1270 mm,
Distance between spindle axis and table surface : 580...1390 mm,
Table diameter : 1800 mm,
Spindle speed range : 8...125 rpm,
Module : 20 mm,
max. gear teeth angle : 45 degree,
Max. work piece weight : 20000 kg,
Max. diameter of installed worm mills : 300 mm,
max. length of installed worm mills : 500 mm,
Main motor power : 20 kW,
Machine dimensions : 6910 x 4440 x 3700 mm,
Machine weight aap. : 32000 kg
 
  156
IDMA27803
MakeKolomna Russia
Model5A342P
YOM1976
ConditionGood Condition
PhotoSee Photo
Max.work piece diameter : 2000 mm,
Max. vertical moving of milling support : 900 mm,
Distance between spindle axis and table : 200...1270 mm,
Distance between spindle axis and table surface : 580...1390 mm,
Table diameter : 1800 mm,
Spindle speed range : 8...125 rpm,
Module : 20 mm,
max. gear teeth angle : 45 degree,
Max. work piece weight : 20000 kg,
Max. diameter of installed worm mills : 300 mm,
max. length of installed worm mills : 500 mm,
Main motor power : 20 kW,
Machine dimensions : 6910 x 4440 x 3700 mm,
Machine weight aap. : 32000 kg
 
  157
IDMA27624
MakeWMW Modul
ModelZFWZ3150x30
YOM1975
ConditionGood Condition
PhotoSee Photo  |  See Video
Dia 3100 mm max. working dia 3150 mm max. module 30 mm table dia 2400 mm max. load on table 30 tons.
 
  158
IDMA27441
MakeRussian
Model5353
YOM1970
ConditionGood Condition
PhotoSee Photo
gear dia capcity 3200 mm, min gear dia capacity 1900 mm, dia of external gear machines 500 mm, module of gear machined : with hob 30 mm, with module milling cutter 35 mm, length of milling : with vertical feed 1200 mm, with radial feed 1350 mm, tooth helix angle +- 45 deg, mass of gear blank machined (including fixture) 40 tons, dia of table working surface 2800 mm, dia of table hole 650 mm, number of T slots : radial 6, parallel 12, distance between table surface and tool spindle axis : min 700 mm, max 2100 mm, aggregate power of electric motors installed 40kW, machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 84 tons
 
  159
IDMA27146
MakeLiebherr
ModelL2500
YOM1976
ConditionGood Condition
PhotoSee Photo
Max. wheel diameter : 2500 mm,
Table diameter : 1800 mm,
Wheel width : 1130 mm,
Module max. : 18,
Hobber length max. : 350 mm,
Table hole : 410 mm,
32 kW,
Weight of the machine ca : 50 to,
Dimensions of the machine : 6500 x 2900 x 4200 mm,
Without telstock,
Gear cutting max.4 meter is possible.
 
  160
IDMI6067
MakeStanko-Russia
ModelUnused
YOM
ConditionGood Condition
PhotoSee Photo
Dia : 600 mm,
Module : 6,
Complete with change gear set.
 
  161
IDMI6066
MakeCugir,Romania
ModelFD400
YOM
ConditionGood Condition
PhotoSee Photo
Max. gear diameter 400 mm,
Max. gear module 8,
Axial travel of milling head 300 mm
Main spindle speed range 50-300 rot/min,
Main motor power 7,5 kw,
Vertical working feed range 071-6.3 mm/rev.,
Weight 4500 kg,
Quantity : 2
 
  162
IDMA27007
MakeTos Czech
ModelFO16
YOM1961
ConditionGood condition,under power
PhotoSee Photo
Max. dia of workpiece : 1600 mm,
Max. Modul : 16 mm,
dia of milled wheel : 1600 mm,
Main motor power : 12 kW,
Overall Dimensions : 4260 x 2255 x 3170 mm,
Change gears, tungational head, arbors etc.
Machine Weight : 18.5 Tons.
 
  163
IDMA26955
MakePfauter,German
ModelP2500
YOM1961 Reconditioned 2007
ConditionGood Condition
PhotoSee Photo
Gear diameter max : 2500 mm,
Gear width : 735 mm,
Module max : 18,
Table diameter : 1900 mm,
Hob head 240 ,
Hob diameter : 290 mm,
Hob length max : 330 mm,
Distance between tool and work piece min/max : 1400 mm,
Hob travel : 300 mm,
RPM 25 - 150,
Total power : 30 kW,
Overall size : 8 x 2,5 x 4 m,
Net weight : 32 t.
Reconditioned in 2007 with new SPS control VIPA STEP 7
and Heidenhain measuring systgem for x/y/z axis,
ABB motor ACS 800,
New electronic gearing for table and hob head (without gears),
Without outer steady.
 
  164
IDMI6053
MakeMuir
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max. dia of gear : 4750 mm,
Max. height of job : 2500 mm,
Max. weight of job : 20 tons,
Min dia of gear : 400 to 500 mm,
Min no of teeth for 25 module is 20 teeth,
Bed dia : 2600 mm,
Bed bore : 400 mm,
Power : 15 to 20 HP.
 
  165
IDMI6049
MakeBombay
Model
YOM
ConditionGood Condition
PhotoSee Photo
(Small Machine)
Module : 8 mm,
Dia : 10 mm to 400 mm,
Height : 150 mm.
 
  166
IDMI6048
MakeWMW Modul
Model
YOM
ConditionGood Condition
PhotoSee Photo
(Big Machine)
Module : 16 mm,
Height : 300 mm,
Helical 45 1000 mm dia,
OD 10 mm - 1300 mm (External),
ID 150 mm - 1300 mm (Internal).
 
  167
IDMA26907
MakeKolomna Russia
Model5A342
YOM1966
ConditionGood Condition
PhotoSee Photo
Max diameter of workpiece : 2000 mm,
Max modul of wheel, machined by worm hob/disc hob/digit hob : 20/25/30,
Diameter of table : 1800 mm,
Max weight of workpiece - 20000 kg
Spindle rotations : 8..100 rpm,
Power : 20 kW,
Dimensions : 8600 x 4440 x 3800 mm,
Weight : 32040 kg.
 
  168
IDMA26882
MakeKolomna Russia
Model5A342P
YOM1983
ConditionExcellent condition,under power
PhotoSee Photo
Max.work piece diameter : 2000 mm,
Max. vertical moving of milling support : 900 mm,
Distance between spindle axis and table : 200...1270 mm,
Distance between spindle axis and table surface : 580...1390 mm,
Table diameter : 1800 mm,
Spindle speed range : 8...125 rpm,
Module : 20 mm,
max. gear teeth angle : 45 degree,
Max. work piece weight : 20000 kg,
Max. diameter of installed worm mills : 300 mm,
max. length of installed worm mills : 500 mm,
Main motor power : 20 kW,
Machine dimensions : 6910 x 4440 x 3700 mm,
Machine weight aap. : 32000 kg
 
  169
IDMI6029
MakeWMW Modul
ModelZFWZ500x8/I-1
YOM
ConditionVery good condition
PhotoSee Photo
Gear dia : 500 mm,
Modul : 8 mm,
Maximum dia without tail stoke : 800 mm,
Horizontal travel of the hob : 430 mm.
 
  170
IDMA26712
MakeFarrel
ModelSykes12H
YOM
ConditionGood Condition
PhotoSee Photo
Normal module : 40 mm,
External diameter : 6200 mm,
The width of the chevron : 1520 mm,
Direct tooth : 760 mm,
Internal : 560 mm,
The height of the axis of the gear over bed : 910 mm,
The height of the axis of the gear over the pit :3550 mm,
Distance between the axes of the greatest : 3780, the least : 254,
Hole in the spindle for fastening : morse 7,
The distance from the face plate,
To lunette greatest : 2900, the least : 2000,
Weight of the work piece maximum : 40 tons,
machine weight : 150 tons.
 
  171
IDMA26612
MakePfauter,German
ModelRS3
YOM
ConditionGood Condition
PhotoSee Photo
Mac. gear diameter : 1800 mm,
Module : 15 mm,
Hob diameter X width : 210 x 260 mm,
Hob travel : 150 mm,
Face plate diameter : 970 mm,
29-114 rpm,
Main motor : 21 kW,
Net weight approx : 8500 kg.
 
  172
IDMA26528
MakeWMW Modul
ModelFCZF03X4
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter of work piece : 250 mm,
For hobs : 8 mm,
For module mill : 14 mm,
Max. hob diameter : 160 mm,
Max. length : 200 mm,
Taper : MKS,
Speed of hob : 50-400 U/min,
Speed of hob : 10 mm /WU,
Speed of table : 1120 mm/min,
Motor power : 15,2 kw,
Weight of machine : 10000 kg,
Dimensions of machine : 6000 x 3800 x 2600 mm,
Quantity : 4 numbers.
 
  173
IDMA26218
MakeTos Czech
ModelFO16
YOM
Conditionworking condition ,under power
PhotoSee Photo
Max. diameter of milled wheel with straight teeth : 1600 mm,
Max. work piece weight : 7000 kg,
Clamping table : 1350 mm,
Diameter of arbor work : 80 mm,
Through bore of clamping table : 180 mm,
Max. distance hob spindle to surface of table : 1050 mm,
Min. distance hob spindle to surface of table : 400 mm,
Number of hob spindle speed : 8,
Range of hob spindle speeds : 16-80 rpm,
Number of feeds of hobbing carriage : 36,
Range of vertical feeds per revolution of table : 0.25-6.0,
Number of feeds clamping table :(radial) : 36,
Range of feeds of clamping table per revolution of table : 0.05-1.5,
Axis to axis distance hob spindle to table : 100-1150 mm,
Motor power : 12 kV,
Length, height,width : 4260 x 2255 x 3170 mm,
Weight : 18500 kg,
With universal cutting head,
Tangential cutting head,
Set of change gears,
Arbours,
Mandrils,
Manuals in spanish language,
Table support : 8 unit.
 
  174
IDMI5869
MakeCugir,Romania
ModelFD320
YOM1976
Conditionworking condition ,under power
PhotoSee Photo
Max. Diameter : 400 mm,
Module : 6 m,
With new compact electrical panel,
Clutch replaced by AC drive.
 
  175
IDMI5866
MakeWMW Niles ,Germany
ModelUnused
YOM
ConditionGood working condition
PhotoSee Photo
Max. Diameter : 500 mm,
Module : 5 m,
With mechanical
 
  176
IDMI5865
MakeWMW
ModelZFW
YOM1990
ConditionExcellent condition,under power
PhotoSee Photo
Max diameter : 400 mm,
Module : 5 m,
New panel with plc/servo/him.
 
  177
IDMI5864
MakeCugir,Romania
Model250
YOM1979
ConditionGood condition,under power
PhotoSee Photo
Max. Diameter : 300 mm,
Module : 6,
With Change Gears.
 
  178
IDMI5841
MakeTos Czech
ModelFO16
YOM
ConditionGood Condition
PhotoSee Photo
gear dia 1600mm, table dia 1350mm, modul 16,load 7 ton, no of grooves 8, no of feeds 36, spindle rotations 1680 rpm, main motor 15 kw, rapid motor 7,5 kw, weight 21 tons.
 
  179
IDMI5830
MakeReinecker
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table dia : 1800 mm,
Max. dia : 2450 mm,
Module : 25 mm,
Main motor power : 14 kW.
 
  180
IDMA25645
MakeKolomna Russia
Model5A342PF2
YOM1991
ConditionGood Condition
PhotoSee Photo
Max. diameter gears cut : 2000 mm,
Max. vertical moving of milling support : 900 mm,
Max. module of processed wheel not less) :
Worm mill : 20 mm,
Disk mill : 25 mm,
Manual mill : 30 mm,
Table diameter : 1800 mm,
Max. work piece weight : 20 ton,
Max corner : +/-45 degree,
diameter of installed worm mills : 300 ...500 mm,
Amount of cuting teeth : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 HZ,380 V,
Main motor power : 20 kW,
Overall dimension (LxWxH) : 8600 x 4440 x 3700 mm,
Machine weight : 32040 kg.
 
  181
IDMA25085
MakeKolomna Russia
Model5A342P
YOM1993
ConditionGood Condition
PhotoSee Photo
Max gear diameter : 2000 mm, Min gear diameter : 200 mm, Minimun teeth number : 20, Maximum module : 25 mm, Maximum table load : 2000 kg, Table diameter : 1800 mm, Main motor power : 15 kW, Overall dimensions L x W x H : 6650 x 2990 x 3460 mm,
 
  182
IDMA24878
MakeTos,Celakovice
ModelFO10
YOM1966
ConditionGood Condition
PhotoSee Photo
Width of work-piece : 400 mm, Table diameter : 850 mm, Max gear diameter without tailstock : 1200 mm, Milling diameter : 170 mm, Milling speed : 20-125 U/min, Hole in table : 100 mm, Main motor : 7.5 kW, Machine dimension : 3120 x 1870 x 2525 mm, Machine weight : 9 ton.
 
  183
IDMA24804
MakeKolomensky,Russia
Model5A342
YOM1991
ConditionGood Condition
PhotoSee Photo
Max diameter gears cut : 2000 mm, Max vertical moving of milling support : 900 mm, Max module of processed wheel (not less): -Worm mill : 20, -Disk mill : 25, -Manual mill : 30 Table diameter : 1800 mm, Max work-piece weight : 20 ton, Max corner : +/- 45 degree, Diameter of installed worm mills : 300...500 mm, Amount of cuting teeths : 10...1800, Spindle speed : 8...125 rpm, Electricity : 50 Hz, 380 V, Main motor power : 20 kW, Overall dimension (LxWxH): 8600x4440x3700 mm, Machine weight: 32040 kg.
 
  184
IDMI5754
MakeTos Czech
ModelFO10
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Max wheel diameter : 1000 mm,
Max module : 10,
Width of work-piece : 400 mm,
( 400 mm width spacer is placed extra under the Tail stock to raise the height),
Table diameter : 850 mm,
Max gear diameter without tailstock : 1200 mm,
Milling diameter : 170 mm,
Milling speed : 20-125 U/min,
Hole in table : 100 mm,
Main motor : 7.5 kW,
Machine dimension : 3120 x 1870 x 2525 mm,
Machine weight : 9 ton.
Machine has complete set of change gears.
 
  185
IDMA24695
MakeTos Czech
ModelFO6
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel diameter: 600 mm
Max module: 6
Table size: 420 mm diameter
Maximum tooth width: 200 mm
Spindle speeds: 15-190 rpm
 
  186
IDMA24154
MakeKolomna Russia
Model5A370
YOM1964
ConditionGood Condition
PhotoSee Photo
Max wheel diameter : 500 mm,
Gear width : 2500 mm,
Max. module : 20/25,
Min wheel diameter : 50 mm,
Hobbing length : 2500 mm,
Number of teeth : 6-200,
Diameter of hob : 250 mm,
Cutter length max : 300 mm,
Milling head speed : 10-103 rpm,
Main gear -box motor : 18,5 kw,
Max angle of teeth : +/-45 degree,
Workpiece weight : 4000 kg,
Total power requirement : 25 kw.
 
  187
IDMA23719
MakeKolomna Russia
Model5A342P
YOM
ConditionComplete ,good working condition
PhotoSee Photo
Max gear diameter : 2000 mm, Min gear diameter : 200 mm, Minimun teeth number : 20, Maximum module : 25 mm, Maximum table load : 2000 kg, Table diameter : 1800 mm, Main motor power : 15 kW, Overall dimensions L x W x H : 6650 x 2990 x 3460 mm.
 
  188
IDMA23635
MakeKolomna Russia
Model5A342P
YOM1988
ConditionExcellent
PhotoSee Photo
Max gear diameter : 2000 mm, Min gear diameter : 200 mm, Minimun teeth number : 20, Maximum module : 25 mm, Maximum table load : 2000 kg, Table diameter : 1800 mm, Main motor power : 15 kW, Overall dimensions L x W x H : 6650 x 2990 x 3460 mm.
With tailstock.
 
  189
IDMA23625
MakeWMW Modul
ModelZFWZ3150 x 30
YOM
ConditionDisassembled
PhotoSee Photo
Max.diameter without the holder : 3150 mm,
Max. diameter with the holder : 1600 mm,
Min. diameter : 500 mm,
Min. width of a tooth : 1000 mm,
Module : 30,
Max corner of an inclination of a tooth : 45,
Max rearranging of a tangential pusher : 500 mm,
Mill,
Max diameter : 350 mm,
Max length : 440 mm,
Tightening a table :
Diameter : 2400 mm,
Aperture : 500 mm,
Depth of an aperture : 1100 mm,
The greatest loading : 30,
Vertical distance between the midle : 700-1900 mm,
Mills and a surface of a table ,
Horizontal distance between the midle : 300-1800 mm,
Mills and the middle of a table.
 
  190
IDMA23536
MakeWMW,Germany
ModelZFWZ5000 x 40/I
YOM1956 - 1960
ConditionExcellent
PhotoSee Photo
Max turning dia : 5000 mm,
Max module : 40,
With Milling head,
Table diameter : 4000 mm,
Table center hole diameter : 800 mm,
Depth : 1500 mm,
Table load 60 t,
Spindle taper : 100 metric,
Head rotation : 195 degrees (15 degrees to the right and to 180 degrees to the left),
Min/ max axis distance 500/2800 (3000) mm - distance between cutter axis and table axis,
Min/ max vertical move 840-2540 mm - distance between table surface and cutter axis,
Electric power requirement appr. 35 kW,
Net weight : 120000 kg,
Complete weight : 140000 kg (with accessories),
FIVE HEADS AVAILABLE :-
Universal cutting head: max diameter 5000 mm, max gear width 1500 mm, max modul 40,
Inner gear disc cutting head to universal gear cutting head: min-max gear diameters 2000-4000 mm, max gear width 300 mm, max modul 24, largest disc cutter diameter 400 mm and width 130 mm.
Tangential cutting head : min-max gear diameters 800-5000 mm, max modul 40, largest cutter diameter 400 mm, cutter tangential move 850 mm,
Finger cutting head for outer gears: min-max gear diameters 800-5000 mm, max gear width 1500 mm,
Finger cutting head for inner gears: min-max gear diameters 1000-4000 mm, max gear width 350 mm, max modul 50
Additional plano milling head for ring millings,
OTHER ACCESSORIES :-
Change gears (very less used - see on photos),
Table supports (8+8 pcs, all scew),
Arbors,
weight,
Centering devices.
You can make external gears, tangential gears and internal gears + plane milling head is available too.
 
  191
IDMA23505
MakePfauter,German
ModelP1501
YOM1973
ConditionGood Condition
PhotoSee Photo
Max. wheel diameter : 1500 mm,
Gear width : 600 mm,
Max. module 16,
Distance table - spindle center : 960 mm
Min. number of teeth 8,
Diameter of hob : 255 mm,
Width of hob : 280 mm,
Axis distance between centers : 60 - 870 mm,
Adjustment of milling-spindle : 250 mm,
Milling slide swivelling : 240 Grad,
Table diameter : 1200 mm,
Table hole : 255 mm,
Milling head speed : 12 - 140 U/min,
Feeds axial : 0,05 - 6,30 mm/U,
Tangential feed : 0,22 - 2,55 mm/U,
Radial feed : 0,18 - 2,0 mm/U,
Electrics - voltage/frequency : 380/50 V/Hz,
Total power requirement : 38,5 kW,
Weight of the machine ca. : 17.700 kg,
Dimensions of the machine ca. : 7,3 x 3,4 x 4,7 m,
Total power requirement : 38,5 kW,
Accessories :-
Twin-cut cycle,
Autom. indexing device,
Prime number - milling device,
Automatic hob movement,
Complete covering,
New electrical cabinet,
Intern. milling head with oil-cooled milling motor.
 
  192
IDMA23501
MakeSchiess,German
Model
YOM
ConditionGood Condition
PhotoSee Photo
From the manufacturer it came as a 5-meter.
Was made the modernization and increased processing diameter up to 6300 mm,
Module 70.
 
  193
IDMI5678
MakeWMW
ModelZFWZ3150x30
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Table dia 2400,
Face width 1200,
Max load 50 T,
Module 40,
Max gear dia 4800 with milling cutter.
 
  194
IDMA23385
MakeWuhan,Chinese
ModelY31500A
YOM1994
ConditionGood condition,under power
PhotoSee Photo
Max modulus is 40, the max swing is 5000mm for fine cutting, and 6300mm for rough cutting.
 
  195
IDMA23212
MakeRussian
Model53B30P
YOM
ConditionBrand New
PhotoSee Photo
Maximal outer diameter of gear to be cut 320 mm,
Maximal module to be treated 6 mm,
Maximal helix angle of teeth to be cut 60 deg.,
Maximal width of spur gear face to be cut 220 mm,
Diameter of table 250 mm,
Distance between the tool axis and the table axis:
minimal/maximal 30...250 mm,
Maximal diameter of hobs to be installed, mm
- diameter 160
- length 160, 220*
Maximal hob travel along the axis (shifting) 75 mm,
Range of numbers of hob revolutions 50...500 rpm,
Range of upright feeds, mm/rev; 0,63...7,3 mm/min
Range of radial feeds, 1...16 mm/min,
Range of tangential feeds, mm/rev 0,26...2,3,
Power of two-speed primary motion drive 3,2/4,2; 7,5*(4,0/4,75) KW,
Overall dimensions 2300х1300х1950 mm,
Weight of the semiautomatic machine 5100 kg.
 
  196
IDMA23132
Make
ModelFD 320
YOM
ConditionGood Condition
PhotoSee Photo
Max. hobbing diameter-320 mm, Max. module-6 mm,Main drive motor power-5.5 kW, Machine weight-4000 kg
 
  197
IDMA23121
MakeChinese
ModelY3150
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max 5 mm steel module,
Casting 6mm,
Process after the maximum diameter of cylindrical gears 350 mm column
After the force-free 500 mm column,
Machining diameter cylindrical helical gear when the helix angle of 30 degrees 370mm,
Machining diameter cylindrical helical gear when the helix angle of 45 degrees 250 mm,
Get the maximum vertical the length 260mm,
The maximum length of a cutting 240mm,
The most large diameter rollers 120mm,
Hob Spindle speed range 50-275/min,
Main motor capacity of 3 kW,
Overall dimensions (length X width X high) 1825X935X1730 mm,
Weight 2400 kg.
 
  198
IDMA23120
MakeChinese
ModelY38-1
YOMBrand New
ConditionBrand New
PhotoSee Photo
The machining accuracy of JB179-83.7,
Max 6 mm steel module,
Casting 8 mm,
Process after the maximum diameter of cylindrical gears 450 mm column
After the force-free 800 mm column,
Processing after the minimum diameter cylindrical column gear Bit 0
Machining diameter cylindrical helical gear when the helix angle of 30 degrees 500 mm,
When the helix angle of 60 degrees 190 mm,
Maximum tooth thickness milling (milling gear when) 250 mm,
Hob Spindle speed range 47.5-192 / min,
Hob Spindle Speed Series 7 files,
The total capacity of 3.125 kilowatts electrical,
Main motor capacity of 3 kW,
Overall dimensions (length X width X high) 2290X1100X1910 mm,
Weight 3400 kg.
 
  199
IDMA23111
MakeChinese
ModelYBS3120
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece dia. 200 mm,
Max. module 4 mm,
Max. worktable speed 25 rpm,
Spindle speed/steps 63-330/8 rpm,
Distance between hob axis and worktable surface 125-295 mm,
Center distance between tool and worktable 20-170 mm,
Distance between end face of bearing hole of tailstockand worktable surface 240-438 mm,
Hob shifting travel (manual) 50 mm,
Max. swiveling angle deg. +/- 45,
Max. hob dia. and length 110 x 110 mm,
Worktable surface dimensions dia. x bore dia. 180 x 40 mm,
Worktable T-slot (No x type)3 x M12,
Total power/Main motor power 4.3/3 kVA/kW,
Machine dimensions (LxWxH)1740x1150x1570 mm,
Case dimension (LxWxH) 1940x1490x1870 mm,
Weight : Net: 2000 kg., Gross: 2250 kg.
With Standard attachments,One set of standard change gears, one set of special tool, hob arbors of dia 22 and dia 27 for each one.
 
  200
IDMA22553
MakeRussian
Model5A342P
YOM1983
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons .
 
  201
IDMA22551
MakePfauter,German
ModelP400
YOM
ConditionExcellent
PhotoSee Photo
Max. module to cut mm. 8
Max. diameter of piece 400 mm,
Max. travel of mill-holder slide 310 mm, Min. nr. of cutting gears: 6 DIMENSIONS Diameter of piece-holder table: mm. 400 Bore diameter of table: mm. 80 Diameter of piece-holder spindle: mm. 36 Max. dimension of milling cutter:
Diameter160 mm, Length 160 mm, Diameter of spindle mill-holder:
With normal accessory 32, 40 mm,
With special accessory 22, 27, 50 mm,
Centre distance between milling and piece:
Max. centre distance 290 mm, Min. centre distance 20 mm,Cone morse: 4,
Max. moving of milling cutter:
Tangential cut 126 mm, Shifting 120 mm, NUMBER OF ROUND AND FEEDS
Milling cutter rpm: rpm 80-500
Axial feed mm/min 0.4-7.5
Radial feed mm/min. 0.1-1.9
Tangential feed mm/min. 0.16-3
ELECTRIC EQUIPMENT
Voltage: V 220/380
Frequency: Hz 50
WEIGHT AND DIMENSIONS
Weight of machine 6.2 tons , Length 4680 mm,
Width 2395 mm,
Height 2515
mm.
Weight of machine : 6200 kg.
 
  202
IDMA22314
MakeSchiess,German
ModelRF30E
YOM1980
ConditionGood Condition
PhotoSee Photo
Max diameter of straight gears to produced by the single indexing method : 5000 mm,
Max. diameter of gears to be hobbed, or of helical gears to be produced by the single Indexing method : 4300 mm,
max. center distance, hob to table : 2750 mm,
min. gear diameter to be hobbed : 50 mm,
min. center distance, hob to table : 100 mm,
max. face width of gear produced : 1200 mm,
Helix Angle produced max : 45 Degree,
table spindle Bore Diameter : 2300 mm,
max. tableload : 30 ton,
max. hob cutter diameter : 450 mm,
hob spindle speed : 12.5 - 90 RPM,
number of speeds : 18,
max modul : 50.
 
  203
IDMA22223
MakeHitachi
Model
YOM1963
ConditionGood Condition
PhotoSee Photo
dia 900 mm, modul 13 - 2 machines
 
  204
IDMA22217
MakeKlingenberg German
ModelAFK201AVAU
YOM1983
ConditionNot used
PhotoSee Photo
Max gear wheel diameter : 500 mm,
Module range : 2-8 mm,
Gear wheel thickness - 70 mm,
Weight : 8500 kg.
 
  205
IDMA22083
MakePfauter,German
ModelP630R
YOM1980
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 630 mm,
max. module 10,
hobbing width 330 mm,
table diameter 550 mm,
milling head -swivable +/- 210 ,
hob turning speeds 25-140 rev/min,
Total power requirement 23 kW,
weight approx. 9500 kg,
Dimension of the machine l/w/h 6,1 x 3,9 x 3,8 m,
with digital readout, change gears, chip conveyor.
 
  206
IDMA22081
MakePfauter,German
ModelP400
YOM1971
ConditionGood Condition
PhotoSee Photo
Gear dia. 400 mm,
Gear width 285 mm,
Modul 0,5 - 6 ( 8 ),
Table dia 400 mm,
Table bore 80 mm,
Spindle 80 - 500 rpm,
Axial feed 0,4 - 7,5,
Radial feed 0,1 - 1,9,
Tang. feed 0,17 - 3,15,
Hob dia. 160 mm,
Hob length 180 mm,
Capacity 17 kW.
 
  207
IDMA21944
Make
Model5K328A
YOM
ConditionVery good condition
PhotoSee Photo
Max. module of the gear:12mm, Max. Diameter of the gear:1250mm, Table diameter:1000mm, Main electric power:10kW, Dimensions:3580x1790x2590mm, Weight:14,000kg
 
  208
IDMA21913
MakeWMW,Germany
ModelZFWZ630
YOM
ConditionGood Condition
PhotoSee Photo
ax. wheel diameter 630 mm,
gear width 400 mm,
max. module 10,
min. module 1,
total power requirement 35 kW.
weight of the machine ca. 9,5 t.
dimensions of the machine ca. 3,5 x 2,5 x 2,3 m.
 
  209
IDMA21886
MakeRussian
Model5A342PF2
YOM1992
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons,
 
  210
IDMA21821
MakeKarats,Japan
ModelGH27
YOM
ConditionGood Condition
PhotoSee Photo
Table dia. : 3200 mm,
Swing dia. : 254 - 10000 mm (table extended),
Width of a tooth : 1100 mm,
Max. hob module : 32,
Hob size : 460mm(dia.) 610 mm (length),
Main spindle speed : 5-50rpm (12 steps),
Power of main motor : 15Kw,
Power of hydraulic motor : 0.75Kw,
Max. weight of work-piece : 40 Tons,
Weight of machine : 80 Tons.
Accessories:
Outside support : 1 set,
Gauge for cutter setting : 1 set,
Support with rollers : 1 set,
Change gears : 1 set.
 
  211
IDMA21806
MakeRussian
Model5342
YOM1957 ,1958
ConditionVery good condition,Under power
PhotoSee Photo
Cutting dia 2000 mm;
Max.cutting length 500 (700) mm;
Max. modul 20 mm (steel)
Max. workpiece weight 10 000 kg
Weight of machine 32 ton
[16:10:09] Kipling / Антон Max. loading on Table: 10 ton
-with vertical cutting 560 mm (22")
-with radial cutting 760 mm (30")
Max. Tooth Rake +/- 45 degree
Max. Mill Diam 250 mm (10")
Max. Mill Length 300 mm (12'')
Milling Spindle RPM 8...100
Spindle Morse 6
Main Motor 14kW
Total Main powered: 22.02 kW
Machine Dimensions 6910 x 2990 x 3462 mm
with internal cutting device, change gears.
Tailstock could be provided (as option)
- 2 machines
 
  212
IDMA21773
MakeLorenz
ModelE30
YOM1977
ConditionGood Condition
PhotoSee Photo
Max./Min. workpiece dia. : 6000 / 150 mm,
Table diameter : 1760 mm,
Max. module : 27,
Hob diameter : 300 mm,
Hob length : 350mm,
Clamping table diameter : 2000mm,
Single cutting is possible.
Original working diameter=3000mm/
Bed is extended by 1500mm(extended part is made by cast)/
Now max. working diameter=6000mm/
Accessories are complete.
 
  213
IDMA21732
MakeRussian
Model5345
YOM1978
Conditioncomplete,excellent condition
PhotoSee Photo
dia of gear machined 5000 mm , dia of gear machines with hob 5000 mm , min dia of gear machined 800 mm , max tooth helix angle machined with hob , deg +- 45 , max module of gear machined : with hob 40 mm , with module milling cutter 50 mm , max milling length : with vertical feed 2000 mm , with radial feed 2200 mm , mass of gear machined (with fixture) 65 tons , dia of table working surface 4000 mm , distance between milling and table spindle axes : min 500 mm , max 3050 mm , distance between milling spindle axis and table surface : min 820 mm , max 3040 mm , number of electric motors installed 10 , main drive DC electric motor : power 42 kW , rotation frequency 250 - 1500 /min , aggregate power of electric motors installed 59.96 kW , machine overall dimensions 11070 x 5090 x 6140 mm , machine weight 132 tons
 
  214
IDMA21727
MakePfauter,German
Model1250
YOM
ConditionGood Condition
PhotoSee Photo
Max. wheel dia.: 1250 mm,
Table dia.: 1000 mm,
Vertical stroke: 600 mm,
Max. module: 12,
Table center hole dia.: 250 mm.
 
  215
IDMA21722
MakeRussian
Model5343
YOM1972
ConditionGood Condition
PhotoSee Photo
max workpiece dia 3150mm, max module 32mm, table dia 2800mm, max workpiece height 1200mm, max workpiece weight 45000kg, main drive power 26kW, total machine weight capacity 81000kg.
 
  216
IDMI5496
MakePfauter,German
ModelRA100
YOM
ConditionGood Condition
PhotoSee Photo
Max Work Dia.: 100 mm,
Max Module (pitch) 4 mm 6 DP,
Max Axial Slide Travel 120 mm,
Min/Max Number of Teeth
-Standard 2 Start Index Drive 5/36
-Optional 2 Start Index Drive 4/24
-Optional 4 Start Index Drive 2/12,
Max Hob Head Swivel +/-40 degrees,
Max Table Speed 50 - 150/min,
Hob Shift Travel 120 mm,
Hob Speeds 180 - 400/min,
Axial Feed 12 Steps Via Change Gears .5 - 6.96 mm/rev,
Center Distance Btwn Work & Hobb 25-110 mm,
Work Table Dia. 150 mm,
Table Bore Dia 63 mm,
Hobb Arbor Dia. 27 mm,
Max Hobb Size 100 mm x 140 mm length.
 
  217
IDMI5495
MakeMikron
Model102
YOM
ConditionGood Condition
PhotoSee Photo
Wheel max diameter in mm - 120mm
Module: 2.
 
  218
IDMA21440
MakeRussian
Model5A342PF2
YOM1991
ConditionExcellent
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons, Manuals and Tech. docs available. All change gears,tailstock, arbors , manuals, instruments, hobs etc available.
 
  219
IDMA21434
MakeRussian
Model5A342PF2
YOM1978
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons
 
  220
IDMI5466
MakeStanko-sedin
Model
YOM
ConditionGood Condition
PhotoSee Photo
Dia- 800 mm
 
  221
IDMI5465
MakeStanko-sedin
Model
YOM
ConditionGood Condition
PhotoSee Photo
Dia- 300 mm, Hydraulic hobber
 
  222
IDMA21166
MakeRussian
Model5A342P
YOM1975
Conditionnever used
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons .
 
  223
IDMA20993
MakeCugir,Romania
Model
YOM
ConditionGood Condition
PhotoSee Photo
2 FD320, including sets of change gears
2 FD500, including sets of change gears
All machines are complete, in good technical condition.
 
  224
IDMA20984
MakeWMW Modul
ModelZFWZ1250/3
YOM1977
ConditionGood Condition
PhotoSee Photo
Max. Wheel dia : 1250 mm, Module : 2 - 14, Gear Width : 600 mm, Dia of hob : 240 mm, Table size : 1020 mm, Turning speed : 28-200 U/min, Feeds - Axial : 0.28 - 8 mm/min, Feeds - Radial : 0.1 - 2 mm/min, Feeds - Tangfential : 0.16 - 4 mm/min, Max. Workpiece length : 1000 mm, No. of teeth : 12 - 600, Table bore dia : 250 mm, Total power : 25 kW, Weight : 16 tons.
 
  225
IDMA20983
MakeWMW Modul
ModelZFWZ1250x14II
YOM1975
ConditionGood Condition
PhotoSee Photo
Max. Wheel dia : 1250 mm, Module : 2 - 14, Gear Width : 600 mm, Dia of hob : 240 mm, Table size : 1020 mm, Turning speed : 28-200 U/min, Feeds - Axial : 0.28 - 8 mm/min, Feeds - Radial : 0.1 - 2 mm/min, Feeds - Tangfential : 0.16 - 4 mm/min, Max. Workpiece length : 1000 mm, No. of teeth : 12 - 600, Table bore dia : 250 mm, Total power : 25 kW, Weight : 16 tons. Electric was modified with Klockner-Moeller relais, outer steady, Motor driven step by step hob shifting, Selection switch for various hobbing programs - radial / axial / tangential, 2 wooden boxes with change gears, arbors & other accessories. 1 Pallet with splash guards and housings, 1 palled with 2 consoles, 1 pallet with two chip boxes, 1 handbooks & manuals.
 
  226
IDMA20972
MakeWMW Modul
ModelZFWZ 1250x14III
YOM
ConditionGood condition,under power
PhotoSee Photo
wheel dia 1250 mm , gear width 600 mm , module 14 , min. module 2 , diameter of hob 240 mm , table surface area 1020 mm , turning speed range 28-200 U/min , feeds axial 0,28-8 mm/min , feeds radial 0,1-2 mm/min , feeds tangential 0,16-4 mm/min. support swivability left/rigth +/-45 , total power requirement 25 kW , weight of the machine 16 tons , dimensions of the machine ca. 4.5 x 2.1 x 3.3 m, With Change Gears.
 
  227
IDMA20928
MakeWMW Modul
ModelZFWZ1250/3
YOM1979
ConditionGood condition,under power
PhotoSee Photo
Max. wheel diameter 1600 mm, gear width 600 mm, max. module 16, min. module 2, diameter of hob 240 x 280 mm, Table surface area 1020 mm, Turning speed range 28 - 200 U/min, feeds - axial 0,28 - 8 mm/min, feeds - radial 0,1 - 2 mm/min, feeds - tangential 0,16 - 4 mm/min, Support swivability - left/rigth +/- 45 , main drive motor 5 / 19.5 kW, Rapid speed drive motor 12,5 kW, electrics - voltage/frequency 380 / 50 V/Hz, Total power requirement 25 kW, weight of the machine ca. 17,5 t, dimensions of the machine ca. 4,5 x 2,1 x 3,3 m, With universal hob head, shifting, outer steady, tangential hob head , chip conveyor
change gears, hob arbors, centres, toolings, 2-gg. gear box, with handbooks etc. partl. rebuilt 2000, with new electric cabinet with PLC control.
 
  228
IDMA20926
MakeLiebherr
ModelLC82
YOM
ConditionGood Condition
PhotoSee Photo
Module:3mm, Workpiece diameter:80mm, Axial travel:250(400mm), Shift Travel:180mm, Hob diameter:90mm, Hob length:210mm, Hob Speed (1/min):5,500
Equipped with Fanuc controls, autoloader, Work clamping, coolant system, auto-programming & auto cycle
 
  229
IDMA20857
MakeModul
ModelZFWZ630
YOM1982
ConditionGood Condition
PhotoSee Photo
Max. dia 630 mm,
Max. module 10 mm,
 
  230
IDMA20814
MakeShibaura
ModelHHR-5000
YOM1973 / 2009
ConditionGood condition,under power
PhotoSee Photo
Table Diameter: 4340 Mm, Max. Working Diameter: 6000 Mm, Min. Working Diameter: 900 Mm, Max. Module: 26 - 27 , Max. Distance Between Center Of Hob Head And Center Of Table: 3007 Mm, Min. Distance Between Center Of Hob Head And Center Of Table: 750 Mm, Stroke Of Hob Head: 2300 Mm, Max. Diameter Of Hob Cutter: 280 Mm, Rpm Of Hob Cutter: 15 ~ 18, Max. Diameter Of Milling Cutter: 300 Mm, Length Of Hob Cutter: 350 Mm, Rpm Of Table: 0.5, Max. Loading Capacity Of Table: 70t, Height Of Machine: 6650 Mm, Width Of Machine: 5530 Mm, Length Of Machine(Front/Back): 10500 Mm, Weight Of Machine: 135,000 Kgs, In 2009 The Machine Was Retrofitted With New Wiring Of Nc System, Nc Control Was Replaced With Turbo Cnc Control, Servo Motors For Forward/Backward Travel And Indexing(Two Axes Are Controlled By Nc System).
 
  231
IDMA20771
MakeRussian
Model5343
YOM1967
ConditionGood Condition
PhotoSee Photo
Max. Work piece dia 3200 mm,
Min. Work piece dia 300 mm,
Table dia. 1800 mm,
Max. Work piece Height 1250 mm,
Max Module 30
machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 84 tons
 
  232
IDMA20769
MakeSchiess,German
ModelRF30S
YOM1978
ConditionGood Condition
PhotoSee Photo
Max dia of workpiece 3000 mm,
Min dia 50 mm,
Module 12,
Max face width 1300 mm,
Faceplate capacity 25 tons,
Max distance between hob and table axes 1600 mm,
Min distance between hob and table axes 100 mm,
Ext/ dia of table 2200 mm,
Max hob dia 340 mm,
Spindle RPM 9-100,
Spindle feeds 0.08-4 mm/rev,
Column feeds 0.16-8 mm/rev,
Number of feeds 18,
Fast feed of hob 170 mm/min,
Fast feed of column 400 mm/min,
Main motor capacity 30kW,
 
  233
IDMA20765
MakeLorenz
ModelE60
YOM1965/1991
ConditionGood Condition
PhotoSee Photo
Max.work piece dia. 6800 mm,
Max.table load 40000 kg.
Max.module with end mill cutter head in cast iron 45
- disc milling cutter in cast iron 40,
- cutter head in cast iron 30,
Max. number of teeth 500,
Min./Max distance between arbor and cutter center 800/3530mm,
Max. vertical stroke of slide 1425 mm,
Clamping table dia. 3250 mm,
Table bore dia.680 mm,
Mandrel dia.200 mm,
Max. counter bore pin length from the top of the faceplate with a diameter of 675 mm at the top of the arbor 1500 mm,
Speed of hob cutter (18 steps)9.6-68rpm,
Number of strokes per table rotation 0.04-4,
Table connected load approx..27Kw,
Voltage 220/380V. 50Hz,
Weight of the machine approx.75000 kg.
Equipment and accessories :
-104 index gears
-47 differential gears
-7 milling spindles (usually a set of milling spindles contains 5 spindles only)
-Types of milling spindles: 62, 40, 50, 60, 80 including bushing sleeve and bearing
-1 additional special table
-7 thrust bearings
-8 clamping segments for the small table
-Machine is equipped with single indexing device
 
  234
IDMA20759
MakePfauter,German
ModelP1501
YOM
ConditionGood Condition
PhotoSee Photo
Workpiece Diameter - 1500 mm, Axial Travel - 600 mm, DP Module In Steel - 16 mm, Ctr Dist Between Workpiece & Hob Min. - 60 mm, Ctr Dist Between Workpiece & Hob Max. - 870 mm, Hob Diameter - 254 mm, Hob Length - 280 mm, Hob Travel - 254 mm, Work Table Diameter - 1200 mm, Table Weight Capacity - 11,000 LBS, Table Weight Capacity - 5000 kG, Dia Of Work Table Bore - 305 mm, Hob Speeds, Infinitely Variable- 30-180 RPM, Axial Feeds, Infinitely Variable - .020-.240 IPR, Axial Feeds, Infinitely Variable .5-6.000 mm/pr, Radial Feeds, Infinitely Variable .007-.084 IPR, Radial Feeds, Infinitely Variable .170-2.000 mm/pr, Tangential Feed, Infinitely Variable .008-.096 IPR, Tangential Feed, Infinitely Variable .200-2.500 mm/pr, main motor 15 kW, Weight Approximately - 41300 LBS.
 
  235
IDMA20712
MakeRussian
ModelBCH350NC22
YOM
ConditionGood Condition
PhotoSee Photo
Maximal diamter of spur geat ot be treated:500mm, Maximal module to be treated: 10mm,maximal helix angle of teeth to be cut, deg:45, diameter of workpiece spindle:250mm, Distance between the tool axis and the table axis:30/350mm, MAximal diameter of hobs to be installed, diameter: 160mm, length:230mm,Maximal hob travel along the axis (shifting):170mm,range of numbers of hob revolutions: 75 up to 400 rpm, range of axial feeds: frm 3 up to 750 incl, range of radial feeds: form 3 up to 600 incl, range, value of hob rapid tangential travels:145mm/min, number of coordinatew to be controlled:3, overall dimensionsL 3485x2160x2335mm, weight of the semiautomatic machine:9500kg.Cycle time: 12,7 mins(approx 5pcs/hr). Delivery time: 5 months
 
  236
IDMA20705
MakeRussian
Model5K328
YOM1971
ConditionGood Condition
PhotoSee Photo
dia with support 850mm,
dia without support 1350mm,
Max. Module 12mm,
Max. face width of spur gear 560mm,
Min. number of teeth machined 20mm,
Max. mass if gear blank machined 2000 kg,
,
Table working surface 935mm,
Main Motor 10 kW,
Dimensions: 3560 x 1760 x 2590mm,
Total weight 14 tons .
 
  237
IDMA20579
MakeRussian
ModelH3222
YOM1984
ConditionGood Condition
PhotoSee Photo
 
  238
IDMA20578
MakeRussian
Model5D312
YOM1985
ConditionGood Condition
PhotoSee Photo
Vertical
 
  239
IDMA20563
MakeRussian
Model5A342
YOM
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  240
IDMA20517
MakeStanko-Russia
Model53A50H
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter 700 mm,
Table diameter 500 mm,
 
  241
IDMA20474
MakeNihonkikai
ModelNDH1200
YOM1974
ConditionGood Condition
PhotoSee Photo
Max. Diameter of Gear to be cut (w/o support) 1250 mm,
Max. Diameter of Gear to be cut (w/support) 768.75 mm,
Max. Pitch of Gear to be cut 2.5 DP
Travel Distance of Hob Saddle 540.625 mm,
Distance between Arbor Centers 59.375 mm,
- with crowning attachments 709.375 mm,
Hob Spindle Speed (stepless) 36-180 RPM
Max. Diameter of Hob Used 200 mm,
Max. Length of Hob Used
Diameter of Hob Arbor (standard accessory) 31.25 , 26.56 mm,
Shifting Distance of Hob Head 98.43 mm,
Diameter of Table 768.75 mm,
Diameter of Table Hole 128.125 mm,
Diameter of Work Arbor (Std. Equipment) 43.75 mm,
Floor Area for Installation 3168.75 x 1565.625 mm,
Weight 21,560 lbs
Voltage 460-60
Machine is equipped with:
Misc Tooling
Misc Change Gears
Books/Manuals
 
  242
IDMA20472
MakePfauter,German
ModelP630
YOM1970
ConditionGood Condition
PhotoSee Photo
Maximum Workpiece Diameter 625 mm,
Maximum Pitch Module 3 DP
Maximum Axial Traverse 437.5 mm,
Minimum Center Distance 50 mm,
Hob Speed Control 62-390 RPM
MACHINE IS EQUIPPED WITH THE FOLLOWING:
Change Gears
Differential
Arbor
 
  243
IDMA20353
MakePfauter-Kapp
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max workpiece diameter-1800 mm, Max diameteral pitch at this- 63.5 mm, Face-560 mm, Max workpiece diameter: Work standard- 700 mm, Work support and overarm-750 mm, Max hobbing length: At workpiece diameter upto 600 mm- 450 mm, At workpiece diameter more than 600 mm- 580 mm, Dia of the work table(incl oil channel)- 1000 mm, Diameter of table bore- 160 mm, Diameter of work arbor- 60 mm, Max hob admissible- 210 mm, Axial distance between hob and workpiece: Max distance- 1050 mm, Min distance- 600 mm, Max hob shifting- 150 mm, Working voltage(3 phase current)- 190,220,280,380, Frequency- periods 50, Total input- 19 HP, Main drive motor- 10 HP 1440 RPM, Rapid motion motor- 3 HP 1400 RPM, Motor for coolant pump- 1.5 HP 2880 RPM, Control coltage- 220 volts, Weight of standard machine w/electrical equipment and normal accessories approximate- 12.5 tons, Space required of the machine with opended doors(lengthxwidthxheight)- 3800mmx2200mmx2700mm
 
  244
IDMA20351
MakeRussian
Model5K328A
YOM
ConditionExcellent
PhotoSee Photo
Gear dia 1250 mm, modul 12 mm, max. tooth length of cutting wheel 560 mm, overall dimensions 3580 x 1790 x 2590 mm, main motor 10 kW, total weight 14 tons
 
  245
IDMA20239
MakeRussian
Model5A342
YOM1968
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  246
IDMA20179
MakeTos Czech
ModelFO6
YOM
ConditionGood Condition
PhotoSee Photo
Max. dia if workpiece 800mm,Modul 6,max. dia. of milled wheel 800mm,main motor output 7 kW,Dimension of machine L2540mmxW1400mm,Machine wt. 4 tons approx.
 
  247
IDMA20139
MakeWMW Modul
ModelZFWZ3150 x 30
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter of gear - 3150 mm, Size of table - 2400 mm, Max. modul - 30, Max. weight of detail - 30000 kg.
 
  248
IDMA20123
MakePfauter,German
Model
YOM1980
ConditionExcellent
PhotoSee Photo
Max. wheel diameter - 250 mm, Gear width - 250 mm, Min./max. module - 1/6, EQUIPPED WITH: change gears.
 
  249
IDMA20105
Make
ModelZFWZ630
YOM
ConditionGood Condition
PhotoSee Photo
Max. wheel diameter - 630,710 mm, Gear width - 400 mm, Max. module - 10, Min. module - 1, Total power requirement - 35 kW, Weight of the machine ca. - 9,5 ton, dimensions of the machine ca. - 3,5 x 2,5 x 2,3 m.
 
  250
IDMA20014
MakeWMW Modul
ModelZFWZ2000/3
YOM
ConditionVery good condition
PhotoSee Photo
Max. work dia. with outer column - 1450 mm, Max. dia. with outer column withdrawn - 2590 mm, Min. dia. with - 375 dia. hob: 355 mm, Min. dia. with 12" dia. hob: 465 mm, Max. tooth width for axial hobbing with straight toothing: 1060 mm, Helical toothing @ 15 deg.: 1016 mm, Helical toothing @ 45 deg.: 762 mm, Max. tooth width for radial axial hobbing: 45 deg, Max. DP with hobbing: 1 DP, Single milling: 3/4 DP, Max. angle of tooth: 45 deg, Smallest number of teeth per teeth cut: 10, Max. hob dia. with standard hob head: 300mm, Max. hob length: 330 mm.
 
  251
IDMA19971
MakeStanko-Russia
Model5K32P
YOM1970's/2009
ConditionGood condition,under power
PhotoSee Photo
Max.working diameter: 800 mm,
Max. module: 10,
Gear width: 350 mm,
Dimensions: 2650 x 1450 x 2000 mm,
Weight: 7200kg.
 
  252
IDMA19970
MakePfauter,German
ModelP900
YOM
ConditionGood Condition
PhotoSee Photo
Max. Working diameter: 900 mm,
Max. Module: 10,
Max. Face width: 500 mm,
Minimum number of teeth (single start): 8,
Minimum number of teeth (double start): 4,
Min./ Max. Distance table to outer steady: 465/ 910 mm,
Min./ Max. Distance table to hob spindle: 50/ 550 mm,
Max. Hob diameter: 192 mm,
Max. Hob width: 220 mm,
Cone of hob arbor: MK 5,
Max. Hob shifting: 200 mm,
Diameter of table: 698 mm,
Diameter of table bore: 160 mm,
Hob speeds, infinitely variable: 60 - 300 RPM,
Feeds - axial: 0, 40-6, 3 mm/rev,
Radial: 0, 1-1, 60 mm/rev,
Tangential: 0, 14-2, 24 mm,
Voltage: 380/3/50,
Main drive motor: 11 kW,
Total power required: 20 kva,
Approximate weight: 8.5ton (18,743 Lbs.)
 
  253
IDMA19943
MakeWMW
ModelZFWZ1250
YOM
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 1250 mm,
gear width 600 mm,
max. module 14,
min. module 2,
diameter of hob 240 mm,
table surface area 1020 mm,
turning speed range 28-200 U/min,
feeds - axial 0,28 - 8 mm/min,
feeds - radial 0,1 - 2 mm/min,
feeds - tangential 0,16 - 4 mm/min,
support swivability - left/rigth +/- 45,
electrics - voltage/frequency 380/50 V/Hz,
total power requirement 25 kW,
weight of the machine ca. 16 t,
dimensions of the machine ca. 4,5 x 2,1 x 3,3 m.

 
  254
IDMA19938
MakeRussian
Model5359
YOM1967
ConditionGood Condition
PhotoSee Photo
Work piece dia 1200 mm, module 12.
 
  255
IDMA19931
MakeRussian
Model5343
YOM1968
ConditionGood Condition
PhotoSee Photo
Diameter of workpiece :
Min : 500 mm,
Max : 3200 mm,
Table diameter : 2800 mm,
Max module :
Gear worm : 26,
Gear plate : 30,
Max gear length : 425 mm,
Distance axis cutter-axis table : 300 x 2150 mm,
Distance axis cutter table surface : 700 x 100 mm,
Max workpiece weight : 40000 kg,
Max corner of an inclination of a tooth : 45 degree,
Number of hobbing spindle revolution (stepless control) : 100 rev/mm,
Horizontal feed number : 18,
Vertical feed number with plate gear : 15,
Main motor power : 25 kW,
Dimension :
Length : 9570 mm,
Width : 3780 mm,
Height : 5170 mm,
Machine weight : 84000 kg.
 
  256
IDMA19840
MakeRussian
Model5A342P
YOM1984
ConditionComplete ,good working condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons , with internal gear cutting attachment at extra cost - 2 pcs.
 
  257
IDMA19784
MakeRussian
Model5A342P
YOM1980
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons .
 
  258
IDMA19736
MakeWMW Modul
ModelZFWZ800/3
YOM1976
ConditionGood Condition
PhotoSee Photo
table diameter: 690 mm, weight approx.: 10000 kg, control: knoventionell, max. module: 3 /10, max. wheel diameter: 800 mm, workpiece length - max.: x mm, hobbing width: 500 mm, hob turning speeds: 40 - 280 U/min, shifting: 150 mm, milling head -swivable +/-: 45 , Dimension of the machine l/w/h: 3,5 x 2 x 2,3 m, Total power requirement: 20 kW, change gears, arbors, chip remover, coolant attachment, manual books, housing.
 
  259
IDMA19730
MakeRussian
Model5K324A
YOM1974
ConditionGood Condition
PhotoSee Photo
Max gear diameter: 500mm, Max tooth helix angle: 60 degrees, Max module of gear: 8mm, Max face width of gear: 300mm, Max nos of gear tooth: 12 nos, No of hob spindle rotations: 9 nos, Range of hob spindle rotations: 50-310rpm, Main motor power: 7.5kw, Dimension: 2500x1440x2000mm, Weight: 6.4 tons.
 
  260
IDMA19636
MakePfauter,German
ModelRA200
YOM1967
ConditionGood Condition
PhotoSee Photo
wheel dia 203 mm, Max. helix angle of tooth: 40 degree , Min. number of teeth to be hobbed, -Standard (1-start index drive): 6(9) , -Special (2-start index drive): 4 , Max. number of teeth to be hobbed: 48(72) , DIMENSIONS: Center distance between workpiece and hob , -Min.: 11 mm , -Max.: 140 mm , Diameter of work table: 220 mm , Diameter of table bore: 62 mm , Bore of table bushing: 72 mm , Diameter of hob arbors (1 included with machine): 21 mm, 24 mm, 19 mm, 11 mm , Hob spindle taper: Morse 4 , Max. hob dimensions: , -Diameter: 124 mm , -Length: 176 mm , Max. hob shift-manual or automatic: 110 mm , Hob speed-adjustable from: 80 - 500 R.P.M. , ELECTRIC SPECIFICATIONS Voltage (standard): 220/380 volts , Frequency (standard): 50 Hz , Rated output of main motor: 10 HP , Total power consumption Of machine: 16.5 kVA , WEIGHT AND SPACE REQUIRED: Weight of the machine: 7 ton , Dimensions of the machine: 3600x2000x2400 mm .
 
  261
IDMA19612
MakeRussian
Model5K328
YOM1970
ConditionGood Condition
PhotoSee Photo
Gear dia 1250 mm, modul 12 mm, max. tooth length of cutting wheel 560 mm, overall dimensions 3580 x 1790 x 2590 mm, main motor 10 kW, total weight 14 tons
 
  262
IDMA19611
MakeRussian
Model5A342
YOM1966 / 1974
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
Qty : 2 nos.
 
  263
IDMI5269
MakeWMW
ModelZFWZ250/4
YOM
ConditionPerfect Condition
PhotoSee Photo
Dia. : 250 mm,
Module : 6,
with all change gears, cutter arbors, work arbors, tooling, chip conveyor, manuals etc.
 
  264
IDMA19595
MakeRussian
Model53A11
YOM1993
ConditionGood Condition
PhotoSee Photo
Maximum dia of gears to be machined :
without support 1250 mm,
with support 800 mm,
Maximum module of gears to be cut 16 mm,
Min. number of teeth to be cut 12 ,
Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 ,
Distance between the axes of table and hob 100-750 mm,
Distance from table plane to hob axis 235-835 mm,
Max. dimensions of hob to be set ::
length 250 mm,
diameter 225 mm,
Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 ,
Max. axial hob travel length 245 mm,
Hob slide rotation speed 28-270 rev/min,
Feed , mm/min:
vertical (0,15-40)* ,
radial (0,06-17,2)* ,
tangential (0,04-19,2)* ,
Main motor power 13/15 kW,
Overall machine dimensions: 4020 x 2350 x 2780 mm ,

Mass of the machine 17.9 tons - 3 machines
 
  265
IDMA19593
MakePfauter,German
Model
YOM1971
ConditionGood Condition
PhotoSee Photo
dia 1800 mm, modul 18.
 
  266
IDMA19592
MakeSchiess,German
ModelRF30/20MS
YOM1976
ConditionGood Condition
PhotoSee Photo
max gear dia 3150 mm, max number of teeth cut 750 , min no of teeth 32 cut, max gear module 12 mm, faceplate dia 2200 mm, max job weight 10 tons , man motor power 24 kw,
 
  267
IDMA19579
MakeCraven,UK
Model6000
YOM1960 Retrofitted 1991
ConditionGood Condition
PhotoSee Photo
Table diameter - 3048 mm, Maximum diameter gear - 6000 mm, Maximum tooth pitch - M50, Vertical stroke of hob slide - 1524 mm, Maximum diameter hob cutter - 560 mm, Column traverse on bed - 3000 mm, Overall dimensions (L/W/H) - 11400 x 4400 x 5500 mm, Width of gear (approx): 1200 - 1300 mm, Weight - 110 tons, Full set of change gears.
 
  268
IDMA19549
MakePfauter,German
ModelP1501
YOM1976
ConditionGood Condition
PhotoSee Photo
Workpiece Diameter - 1500 mm, Axial Travel - 600 mm, DP Module In Steel - 16 mm, Ctr Dist Between Workpiece & Hob Min. - 60 mm, Ctr Dist Between Workpiece & Hob Max. - 870 mm, Hob Diameter - 254 mm, Hob Length - 280 mm, Hob Travel - 254 mm, Work Table Diameter - 1200 mm, Table Weight Capacity - 11,000 LBS, Table Weight Capacity - 5000 kG, Dia Of Work Table Bore - 305 mm, Hob Speeds, Infinitely Variable- 30-180 RPM, Axial Feeds, Infinitely Variable - .020-.240 IPR, Axial Feeds, Infinitely Variable .5-6.000 mm/pr, Radial Feeds, Infinitely Variable .007-.084 IPR, Radial Feeds, Infinitely Variable .170-2.000 mm/pr, Tangential Feed, Infinitely Variable .008-.096 IPR, Tangential Feed, Infinitely Variable .200-2.500 mm/pr, Weight Approximately - 41300 LBS.
 
  269
IDMI5265
MakeStanko-Russia
Model
YOM
ConditionExcellent
PhotoSee Photo
Table dia. : 300 mm,
Max. Module : 6,
Control : PLC Attached (Messung make).
 
  270
IDMA19536
MakeRussian
Model5353
YOM
ConditionComplete ,good working condition
PhotoSee Photo
gear dia capcity 3200 mm, min gear dia capacity 1900 mm, dia of external gear machines 500 mm, module of gear machined : with hob 30 mm, with module milling cutter 35 mm, length of milling : with vertical feed 1200 mm, with radial feed 1350 mm, tooth helix angle +- 45 deg, mass of gear blank machined (including fixture) 40 tons, dia of table working surface 2800 mm, dia of table hole 650 mm, number of T slots : radial 6, parallel 12, distance between table surface and tool spindle axis : min 700 mm, max 2100 mm, aggregate power of electric motors installed 40kW, machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 84 tons
 
  271
IDMA19359
MakeGould & Eberhardt
Model
YOMOverhauled in 1985
ConditionGood Condition
PhotoSee Photo
Modul: 1-16,
Diameter: 150-2500 mm,
Max gear widht: 600 mm,
Machine weight: 14ton,
Lenght: 4870 mm,
Widht: 2200 mm,
Height: 3300 mm,
 
  272
IDMA19344
MakeTos Czech
ModelFO10
YOM1975
ConditionGood Condition
PhotoSee Photo
Max module 10,
Max gear diameter 1000 mm,
Max diameter with tailstock 750 mm,
Max width of tooth 400 mm,
Table diameter 850 mm,
Hole in table 100 mm,
Milling speed 20 - 125 U/min,
Min/max height of the cutter from the table 280 mm / 740 mm,
Milling spindle taper MORSE 5,
Vertical feed 0,2 - 6,00 mm /min,
Longitudinal feed 0,05 - 1,50 mm /min,
Tangential feed 0,133 - 4,0 mm /min,
Main motor power 10 kW,
Dimensions Length 3,120 m , Width 1,840 m ,
Machine weight 9,36 t
- 2 nos
 
  273
IDMA19337
MakeRussian
Model5V373P
YOM1977
ConditionGood Condition
PhotoSee Photo
Dia. of gear machine : 80-800 mm,
Max. length of pinion machin 4000 mm,
Max. module of gear machine :
With hob 30,
With module milling cutter 35,
Number of teeth machine : 6-385,
Max. tooth helix angel +/- 45 deg.,
Taper of milling spindle hole : Metric 80,
Max. dimensions of cutting tool :
Dia. 360 mm,
Length 425 mm,
Dia of milling arbors 60;80;100,
Range of miolling spindle rotation frequencies 10-60 min-1,
Range of hob feeds per workpiece revolution 0.3-16 mm,
Main drive DC motor power 25kW,
Main drive DC motor rotation frequency 300-1500 min-1,
Aggregate power of electric motors installed 33.17 kw,
Machine overall dimensions 8800 x 3700 x 2950 mm,
Weight 48000 kg.
 
  274
IDMA19314
MakePfauter-Kapp
ModelP630
YOM
ConditionGood Condition
PhotoSee Photo
Maximum diameter to machine 630 mm,
Module 8,
Min. Teeth number 8,
Maximum width to hob 410 mm,
tangential travel of the milling cutter 200 mm,
Table diameter 550 mm,
Bore in the table 125 mm,
maximum hob diameter 192 mm,
Maximum length 215 mm,
Distance entre la fraise et la pice 50/425 mm,
Variable milling cutter speed (infiniment) 45 280 tr/mn,
Feeds 0,10 6,80 mm/tr,
Motor 10 cv,
Approximate weight 7600 kg,
Dimensions 3000x2000x2075 mm.
With - Taillage radial, axial, tangentiel, diagonal, shifting.
Accessories :
- Visu 2 axes,
- Arbre porte-fraise,
- Arbre porte-pices,
- Cycle 2 passes,
- Convoyeurs copeaux,
- Dplacement automatique de la fraise.
 
  275
IDMA19313
MakeTos Czech
ModelOFA32A
YOM
ConditionGood Condition
PhotoSee Photo
Maximum diameter to machine 320 mm,
Module 7,
Number of teeth 9-200,
maximum hob diameter 150/200 mm,
Table diameter 300 mm,
Milling cutter axial stroke 150 mm,
Bore in the table 80 profondeur 750 mm,
Number of speeds 17,
Variable milling cutter speed 71 450 tr/mn,
Radial feed 0,5 25 mm/mn,
Axial feed 1 220 mm/mn,
Tangential feed 0,26 50 mm/mn,
Motor 7,5 kw,
Approximate weight 5500 kg.
Dimensions 2520x2390x1820 mm.
 
  276
IDMA19298
MakeRussian
Model5K32A
YOM1973
ConditionGood Condition
PhotoSee Photo
Max.working diameter 800 mm,
Max. module 10,
Gear width 350 mm.
 
  277
IDMA19253
MakeHeidenreich & Harback
Model75KH
YOM1952
ConditionGood Condition
PhotoSee Photo
Biggest Wheel diameter - 750 mm, Most of taper length - 400 mm, Module 3 and Module 20 (spur), Weight - 8 tons.
 
  278
IDMA19252
MakeLiebherr
ModelS5V
YOM1996 Revised
ConditionGood Condition
PhotoSee Photo
Module - 6, Pitch Circle Diameter - 500 mm, largest module - 6, max. Workpiece diameter with overarm - 500 mm, max. Workpiece diameter without overarm - 800 mm, max. Workpiece - 360 mm, Table diameter - 550 mm, max. Cutter diameter - 160 mm, max. Mills Length - 130 mm, Total connected load - approx 11KW, Floor space (LxWxH): 3.3 x 1.8 x 1.9 m, Weight approx 5.6 tons.
 
  279
IDMA19251
MakeLiebherr
ModelL300
YOM1965
ConditionGood Condition
PhotoSee Photo
largest module - 4.5, smallest number of teeth - 6, max. Workpiece diameter - 300 mm, max. Workpiece - 200 mm, Table diameter - 315 mm, max. Cutter diameter - 125 mm, max. Mills Length - 105 mm, Total Power input - 9 kW, Floor space (LxWxH): 2.1 x 1.1 x 1.8 m, Weight about 4 tons.
 
  280
IDMA19249
MakeLiebherr
ModelL902
YOM1982
ConditionGood Condition
PhotoSee Photo
Module: 10 (-14), Pitch Circle Diameter - 740 mm
 
  281
IDMA19243
MakeWMW Modul
ModelZFWZ250/3
YOM1989
ConditionExcellent
PhotoSee Photo
Work Dia - 250, Module - 6.
 
  282
IDMA19212
MakeRussian
Model5A342P
YOM1989
ConditionComplete,working condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  283
IDMA19197
MakeShibaura
ModelJ.E. Reinecker AG Chemnitz
YOM
ConditionGood Condition
PhotoSee Photo
dia 2400 mm.
 
  284
IDMA19182
MakeTos Czech
ModelFO10
YOM
ConditionComplete ,good working condition
PhotoSee Photo
Max. diameter of workpiece 1250 mm,
Modul 10 ,
Main motor output 7.5 kW,
Dimensions 3120 x 1870 x 2525 mm,
Machine weight 8700 kg
 
  285
IDMA19146
MakeRussian
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table dia. - 950 mm, Max workpiece dia. - 1000 mm, Max. Modul 20, Full set of change gears Hob arbors - 4
 
  286
IDMA19114
MakeRussian
Model5343
YOM
ConditionGood Condition
PhotoSee Photo
gear dia capcity 3200 mm, min gear dia capacity 1900 mm, dia of external gear machines 500 mm, module of gear machined : with hob 30 mm, with module milling cutter 35 mm, length of milling : with vertical feed 1200 mm, with radial feed 1350 mm, tooth helix angle +- 45 deg, mass of gear blank machined (including fixture) 40 tons, dia of table working surface 2800 mm, dia of table hole 650 mm, number of T slots : radial 6, parallel 12, distance between table surface and tool spindle axis : min 700 mm, max 2100 mm, aggregate power of electric motors installed 40kW, machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 84 tons
 
  287
IDMA19065
MakeStanko-Russia
Model5K329
YOMOverhauled in 2009
ConditionGood Condition
PhotoSee Photo
Max. Working Diameter - 800 mm, Max. Module - 10
 
  288
IDMA19034
MakeRussian
Model5A342P
YOM1981,1984
ConditionComplete ,good working condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons - 2 machines
 
  289
IDMA19024
MakeWMW Modul
ModelZFWZ800 x 10
YOM1978
ConditionGood Condition
PhotoSee Photo
approx 40 change gears
 
  290
IDMA19023
MakeWMW Modul
ModelZFWZ630 x 10
YOM1975
ConditionGood Condition
PhotoSee Photo
approx 40 change gears
 
  291
IDMA18996
MakeLorenz
ModelE30
YOM
ConditionGood Condition
PhotoSee Photo
Dia 2000 mm,
Modul 30,
Gear width 1200 mm,
Table dia.1500 mm.
 
  292
IDMA18983
MakeLansing
ModelGH50
YOM
ConditionGood Condition
PhotoSee Photo
Diametral Pitch Rating, Maximum 2 DP,
Workpiece 1260 mm, Table Load Capacity 6614 LBS,
Gear Width, Maximum 443.75 mm, Hob Diameter, Maximum 215.625 mm, Hob Lenth, Maximum 215.625 mm, Hob Speeds, Range 18 to 185 RPM,
Motor, Horsepower, Total 30 HP
Weight, Approximately 26500 LBS, EQUIPPED WITH:
Differential Mechanism
 
  293
IDMA18932
MakeRussian
ModelE3C646.31
YOM1991
ConditionGood Condition
PhotoSee Photo
Maximum dia of gears to be machined : without support 1250 mm, with support 800 mm, Maximum module of gears to be cut 16 mm, Min. number of teeth to be cut 12 , Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 , Distance between the axes of table and hob 100-750 mm, Distance from table plane to hob axis 235-835 mm, Max. dimensions of hob to be set :: length 250 mm, diameter 225 mm, Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 , Max. axial hob travel length 245 mm, Hob slide rotation speed 28-270 rev/min, Feed , mm/min: vertical (0,15-40)* , radial (0,06-17,2)* , tangential (0,04-19,2)* , Main motor power 13/15 kW, Overall machine dimensions: 4020 x 2350 x 2780 mm , Mass of the machine 17.9 tons.
 
  294
IDMA18920
MakeRussian
Model53A11
YOM1987
ConditionComplete ,good working condition
PhotoSee Photo
Maximum dia of gears to be machined : without support 1250 mm, with support 800 mm, Maximum module of gears to be cut 16 mm, Min. number of teeth to be cut 12 , Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 , Distance between the axes of table and hob 100-750 mm, Distance from table plane to hob axis 235-835 mm, Max. dimensions of hob to be set :: length 250 mm, diameter 225 mm, Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 , Max. axial hob travel length 245 mm, Hob slide rotation speed 28-270 rev/min, Feed , mm/min: vertical (0,15-40)* , radial (0,06-17,2)* , tangential (0,04-19,2)* , Main motor power 13/15 kW, Overall machine dimensions: 4020 x 2350 x 2780 mm , Mass of the machine 17.9 tons.
 
  295
IDMA18915
MakeTos Czech
ModelF010
YOM
ConditionVery good condition
PhotoSee Photo
Max module- modul 10, Max diameter of workpiece- 1000 mm, Max diameter of workpiece including steady- 750 mm, Wheelwidth- 400 mm, Milling diameter- 170 mm, Tablesize- 850 mm, Hole in table -100 mm, Machineweight- 936 tons, Main power- 10 PS, Including 1 Axis DRO SONY, Including change gear, Including toolstaper, Including manual
 
  296
IDMA18908
MakeTos Czech
ModelF010
YOM
ConditionGood Condition
PhotoSee Photo
Dia-1000 mm, Module-10
 
  297
IDMA18892
MakeLorenz
ModelDE40
YOM
ConditionGood Condition
PhotoSee Photo
Lenght x widht x height: 9000x3500x3300mm,
Installed power: 14kW,
Max. incise module: 25mm,
Max. workpiece diameter: 4000mm,
Max. widht gear hobbing; 1000mm,
Max. milling widht: 800mm,
Nominal voltage: 3x380V/220V,
Mass: 8000kg.
 
  298
IDMA18867
MakePfauter,German
ModelP630
YOM
ConditionGood Condition
PhotoSee Photo
Work capacity:max. diameter 630 mm,
max. module 10,
max. gear wheel width 375 mm,
Pitch min. 8,
Axes distance between workpiece
and tool:
min. 50 mm,
max 425 mm,
Diam. of the clamping table 550 mm,
Diameter of the table drill 125 mm,
Gear hob:
max. diameter 192 mm,
min. diameter 215 mm,
Max. milling cutter displac. 200 mm,
Milling cutter speeds:
from 62 rpm,
up to 390 rpm,
Feeds:
axial from 0.40 mm/r,
up to 6.80 mm/r,
radial from 0.1 mm/r,
up to 1.76 mm/r,
Voltage 50 Hz 3x 380 Volt,
Power 7.5 kW,
Total power required 21 kVA,
Machine''s weight about 8200 kg.
With Set of gears,
Set of cutter arbors,
Chip conveyor,
Dust extraction.
 
  299
IDMA18851
MakeChurchill,UK
ModelPH3615
YOM1985
ConditionGood working condition
PhotoSee Photo
Max. work piece diameter 915 mm
Module 8,5,
Tail stock and full set of change gears available.
 
  300
IDMA18814
MakeModul
ModelZFWZ 5000 x 40
YOM1965
ConditionGood condition,under power
PhotoSee Photo
Work dia - 5000 mm, Modul 40, Work weight - 60 Ton, Weight of machine - 125 Ton.
 
  301
IDMA18781
MakeBelarus
Model53B30P
YOMBrand New
ConditionBrand New
PhotoSee Photo
Size - 320 mm, 6 - module.
 
  302
IDMA18775
MakeBelarus
ModelBCH150NC22
YOMBrand New
ConditionBrand New
PhotoSee Photo
Workpiece dia. : 500 mm.
 
  303
IDMA18773
MakeBelarus
ModelBCH350NC22
YOMBrand New
ConditionBrand New
PhotoSee Photo
Size - 500 mm, Module - 10.
 
  304
IDMA18748
MakeWMW Modul
ModelZFWZ3150 x 30
YOM1967
Conditionexcellent working condition
PhotoSee Photo
Dia 3100 mm max. working dia 3150 mm max. module 30 mm table dia 2400 mm max. load on table 30 tons
 
  305
IDMA18707
MakeHurth,Germany
ModelWF300
YOM1995
ConditionGood Condition
PhotoSee Photo
Max. workpiece diameter - 315 mm, Module - 8 mm, Control SIN -880M, X- 210 mm, Y-240 mm, Z- 360 mm, Milling head -swivable +/- 45 , Diameter of hob max. -175 mm, Milling spindle turning speed range -100 - 800 U/min, Workpiece turning speeds 0,2 - 55 U/min, Distance milling spindle - workpiece 40 - 250 mm, Dist. milling spindle - table surface 210 - 570 Grad, Number of working hours 31.999 h, 35 KVA, Main drive 14,00 Kw, Feed range 0,1 - 1000 mm/min, Rapid traverse radial 5.000 mm/min, Rapid traverse axial 5.000 mm/min, Rapid traverse tangential 3.000 mm/min, Total power requirement 25,00 Kw, Weight of the machine ca. 10,00 t, Dimensions of the machine ca. 3,10 x 2,40 x H2,60m.
 
  306
IDMA18689
MakeGould & Eberhardt
Model48HS
YOM
ConditionGood Condition
PhotoSee Photo
Maximum Diametal Pitch (Steel) 2,
Table dia 800 mm,
Face Capacity 400 mm,
Maximum Diametal Spur Gear(With Support 800 mm, Maximum Diametal Spur Gear(No Support 1200 mm, Maximum Hob Diameter 200 mm,
Index Worm Gear Diameter, Hob Speeds Range...........................................22-130 RPM
Number12,
Floor Space 2050 x 3750 mm, Height 2400 mm, Weight Net Weight (approximate)............................
EQUIPPED WITH:

Hob Arbor Coolant System+
Setup Of Change Gears Arranged For 220-230 Or 440-480 Volt Motor+
110 Push Button Control Not Equipped With Tailstock

 
  307
IDMA18675
MakeWMW Modul
ModelZFWZ800 x 10/II
YOM1970
ConditionGood Condition
PhotoSee Photo
Maximum wheel diameter- 800 mm, Maximum gear Width- 410 mm, Maximum Module- 10 Mod, Maximum hob diameter- 195 mm, Table diameter- 700 mm, Power capacity- 12.5 kW, Weight Net weight- 22,000 Lbs, Equipped with 1.25 Hob arbor, Chip conveyor, Auto cycle, Splash guards, Change gears
 
  308
IDMA18674
MakeGould & Eberhardt
Model36H
YOM
ConditionGood Condition
PhotoSee Photo
Maximum travel of hob slide- 600 mm, Maximum diameter (spur gear with support)- 600 mm, Maximum diameter (spur gear wtihout support)- 900 mm, Minimum centers work and hob arbors- 75, Maximum diameter hob- 200, Diameter work table- 600, Floor space-2075x4100, Height wtihout overarm- 2225, Height with overaarm- 2525
 
  309
IDMA18670
MakeGould & Eberhardt
Model24H
YOM
ConditionGood Condition
PhotoSee Photo
Maximum part centered-850 mm, Maximum diameter spur gear (with support)-450 mm, Maximum diameter spur gear (no support)- 600 mm, Maximum diameter hob- 450 mm, Diameter index worm gear- 450 mm, Tail stock with center, Set up of change of gears, Coolant system, Ratio 10/T, LUB System, Full Load 12 AMPS AT 440 VOLT, 110 Push button control, Note the motor and control had been updated
 
  310
IDMA18668
MakeLiebherr
ModelL301
YOM
ConditionGood Condition
PhotoSee Photo
Maximum Pitch For Hobbing Steel 4,25 DP
Maximum Workpiece Diameter 300 mm,
Travel Of Hob Head Carriage 225 mm,
Work Table Diameter 215 mm,
Hob Spindle Centerline Above Machine Table 165 mm Minimum,
Maximum Length Of Workpiece 680 mm,
Infinitely Variable Radial Feed 0.9906 1198 mm/Minute
Rapid Traverse Of Hob Slide 960 mm/Minute
Weight Of Machine 14,000# Approx
Maximum Hob Length 150 mm, Maximum Hob Diameter 140 mm,
Maximum Hob Shift Or Tangential Travel 150 mm,
Hob Head RPM, Infinitely Variable 80 640.
Equipped With :
Tailstock, Coolant,
Chip Conveyor, Change Gears - 2 Set Ups,
Two Cut Cycle, Crowning,
Differential, Willy Vogel Lubrication,
Auto Hob Shift,
440 3ph 60 Cycle,
Climb Hobbing.
 
  311
IDMA18666
MakePfauter,German
ModelP400
YOM
ConditionGood Condition
PhotoSee Photo
Max. Workpiece Diameter 406 mm,
Max. Dp in Steel 3,
Face Capacity 305 mm,
Max. Center Distance Between Workpiece & Hob 470 mm,
Max. Distance Work Table to Tailstock Center 635 mm,
Max. Hob Diameter 152 mm,
Max. Length of Hob 152 mm,
Max. Adjustment of Hob Spindle (Auto/Manual) 102/114 mm,
Max. Swivel of Hob Slide 240 Deg.,
Diameter Work Table 394 mm,
Diameter of Hole in Work Table 76 mm,
Speeds Infinitely Variable 80 TO 500 rpm,
Axial Feeds 0.39878 4.90 mm Rev./Per Min,
Radial Feeds 0.198 2.448 mm Rev./Per Min,
Tangential Feeds 0.16764 - 2.09804 mm Rev./Per Min
Floor Space Required 2845 x 1803 x 1803 mm,
Machine Weight 13,200 lbs.
Machine is capable of doing high helix angle gears.
 
  312
IDMA18663
MakeWMW Modul
ModelZFWZ630
YOM
ConditionGood Condition
PhotoSee Photo
Face 305 mm,
Maximum Pitch Diameter 635 mm,
Equipped With :
Differential Hob Shift Hob Arbors
Very large selection of change gears -extra tooling.
 
  313
IDMA18662
MakeWMW Modul
ModelZFWZ800/3
YOM1972
ConditionVery good condition
PhotoSee Photo
max. wheel diameter-800 mm, gear width-410 mm, max. module -10, min. module 3, wheel diameter with counterstay -500 mm, table surface area- 700 mm, diameter of hob -195 mm, width of hob -220 mm, feeds - milling head 22n: 40-280 mm/WZ, turning speed range 40 - 280 U/min, max. helix angle -45 , electrics voltage /frequency 380/50 V/Hz, total power requirement 24 Kw, weight of the machine ca. 7,5 t, dimensions of the machine ca. 3,8 x 1,6 x 2,3 m
 
  314
IDMA18657
MakeLiebherr
ModelL400
YOM1964
ConditionGood Condition
PhotoSee Photo
max. wheel diameter -400 mm, gear width-300 mm, max. module -8, milling head speed -40-240 U/min, feeds- 0,1-200 hor. mm/WU, feeds- 0,3-4,8 vert. mm/WU, electrics - voltage/frequency- 380/50 V/Hz, total power requirement -16 Kw, weight of the machine ca. 6,8 t, dimensions of the machine ca. 3,4x1,9x2,3 m.
 
  315
IDMA18655
MakeLiebherr
ModelL301
YOM1974
ConditionGood Condition
PhotoSee Photo
Maximum Work Diameter-295 mm, Coarsest Pitch-4.25 DP, Maximum Axial Travel-218 mm, Minimum Number of Teeth-6, Diameter of Worktable-309 mm, Diameter Index of Worm Wheel-325 mm, Diameter of Center Bore in Table-78 mm, Distance, CL of Hole to Work Arbor-218 mm, Maximum Diameter/Length of Hob-137/150 mm, Maximum Shifting Travel-675 mm.
 
  316
IDMA18644
MakeRussian
Model5355B
YOM1972
ConditionGood Condition
PhotoSee Photo
Table diameter : 4000mm, Table hole : 800 mm, Max. workpiece diameter : 8000 mm, Min. workpiece diameter : 500 mm, Max. workpiece weight : 60 t, Max. width of wheel : 2000 mm, Max. module: 75, Accuracy class:H Spindle cone: Metric 100 Max. diameter of mill:400mm Max. length of mill:500mm Max. travel:2380mm(93.7") Distance between table and mill axis: Min:500mm, Max:4250mm Distance between table surface and mill axis: Min:820mm Max:3200mm, Machine weight:192 t
 
  317
IDMA18643
MakePfauter,German
ModelP400
YOM1976
ConditionGood Condition
PhotoSee Photo
max. wheel dia. : 400 mm,
max. module : 8 mm,
spindle admission : 450 mm,
spindle numbers of revolution: 80-480 U/min,
feed motions : 20 - 230 m/mins,
milling length : 160 mm,
tangential stroke : 126 mm,
1 complete set of change gears,
7 spindle adapter : MKIV,
1 replacement gear belt,
motor : 380 V 50 Hz 14 kW,
Dimensions : 2300 x 1500 x 2100 mm,
weight : 6200 kg.
 
  318
IDMA18564
MakePfauter,German
Model1800/2200
YOM
ConditionVery good condition
PhotoSee Photo
with tangential head, without tailstock
 
  319
IDMA18539
MakeRussian
Model5342
YOM1974
ConditionUnder power
PhotoSee Photo
Table Dia - 1800 mm, Machine weight - 28 Tons, Max. workpiece dia - 2600 mm, Max. Module - 25 mm, Vertical Movement of hob head - 1400 mm, Fitter with Gear Holding Mandrel & Center, Change Gears, APP 100 NO, 4 NO Cast Iron Support for job holding, 2 no small mandrel, 4 no Arbour support lying on table.
 
  320
IDMA18468
MakeTos Czech
ModelFO10
YOM
ConditionGood condition,under power
PhotoSee Photo
Module maximum 10
Diameter work piece 1000 mm. max Height 400mm
weight of machine 9360 kg. Complete Set of change gears and Arbors
 
  321
IDMA18460
MakeGleason USA
Model125GH
YOMReconditioned 2007
ConditionGood Condition
PhotoSee Photo
Nominal Workpiece Diameter-125 mm, Maximum Dia Pitch (coarsest)-3.2 module, Distance Between Work Spindle And Tailstock: Spindle Faces: Minimum/Maximum-252 - 473 mm, Maximum Hob Diameter-115 mm, Hob Lengths Up To-215 mm, Hob Arbor Diameter (optional)-22,27,32,40mm, Tangential Slide Travel (hob shift)-200 mm, Hob Speed Range-150-1500 rpm, Workspindle Speed-5-250 rpm, Floor Space-2578x1650x3117 mm, Net Weight- 6820 kg.
 
  322
IDMA18332
MakeLorenz
ModelE18
YOM
Condition
PhotoSee Photo
Max. dia. of gear 1220mm,max. hob 184mm,max.D.P. hob 2,max. hob travel 571.5mm(index and differ gears., table dia. 812mm,table bore dia. 133.35mm,Electricals 240V,Dimensions of machine 1828mm x 3350mm x 2133mm,Wt. of machine 17 tons approx.
 
  323
IDMA18287
MakeKolomna Russia
Model5342
YOM1959
ConditionGood Condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  324
IDMA18275
MakeRussian
Model546M
YOM1982
ConditionGood Condition
PhotoSee Photo
Work piece dia 2250-5000 mm,
Max. module of the wheels 16 mm,
Number of cogs 120-800,
Table dia 3800 mm,
Distance between the table and the mill axis 550-950 mm,
Max. table load capacity 40 tons,
Cutting accuracy - Fpr - 2,5 fur - 0,6-0,7,
The machine weight 75,1 tons,
Gear hobbing master-machine for finshing worm-wheels of the high accuracy.
 
  325
IDMA18247
MakeRussian
Model5K328A
YOM1980
ConditionGood Condition
PhotoSee Photo
dia with support 850mm,
dia without support 1350mm,
Max. Module 12mm,
Max. face width of spur gear 560mm,
Min. number of teeth machined 20mm,
Max. mass if gear blank machined 2000 kg,
,
Table working surface 935mm,
Main Motor 10 kW,
Dimensions: 3560 x 1760 x 2590mm,
Total weight 14 tons - 3 machines
 
  326
IDMA18148
MakeWMW Modul
ModelZFWZ1250/3
YOM
ConditionGood Condition
PhotoSee Photo
Max. dia : 1250 mm, Gear Width : 600 mm, Max. module : 14, With Change gears.
 
  327
IDMA18127
MakeRussian
Model53A11
YOM1990
ConditionVery good condition
PhotoSee Photo
Maximum dia of gears to be machined :
without support 1250 mm,
with support 800 mm,
Maximum module of gears to be cut 16 mm,
Min. number of teeth to be cut 12 ,
Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 ,
Distance between the axes of table and hob 100-750 mm,
Distance from table plane to hob axis 235-835 mm,
Max. dimensions of hob to be set ::
length 250 mm,
diameter 225 mm,
Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 ,
Max. axial hob travel length 245 mm,
Hob slide rotation speed 28-270 rev/min,
Feed , mm/min:
vertical (0,15-40)* ,
radial (0,06-17,2)* ,
tangential (0,04-19,2)* ,
Main motor power 13/15 kW,
Overall machine dimensions: 4020 x 2350 x 2780 mm ,

Mass of the machine 17.9 tons.
 
  328
IDMA18045
MakeChinese
ModelY31200E
YOM
ConditionGood Condition
PhotoSee Photo
dia. 2.000,max modul 20
 
  329
IDMA17996
MakeKOMSOMOLETZ
Model5327
YOM1962
ConditionComplete,working condition
PhotoSee Photo
Work piece diameter 1000 mm, Module 12, Faceplate diameter 700 mm, 5327 - cutter's DxL 225x240 mm.
 
  330
IDMA17975
MakeRussian
Model53A11
YOM1990
ConditionVery good condition
PhotoSee Photo
Maximum dia of gears to be machined :
without support 1250 mm,
with support 800 mm,
Maximum module of gears to be cut 16 mm,
Min. number of teeth to be cut 12 ,
Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 ,
Distance between the axes of table and hob 100-750 mm,
Distance from table plane to hob axis 235-835 mm,
Max. dimensions of hob to be set ::
length 250 mm,
diameter 225 mm,
Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 ,
Max. axial hob travel length 245 mm,
Hob slide rotation speed 28-270 rev/min,
Feed , mm/min:
vertical (0,15-40)* ,
radial (0,06-17,2)* ,
tangential (0,04-19,2)* ,
Main motor power 13/15 kW,
Overall machine dimensions: 4020 x 2350 x 2780 mm ,

Mass of the machine 17.9 tons.
 
  331
IDMA17964
MakeLiebherr
ModelLC502
YOM1990
ConditionGood Condition
PhotoSee Photo
max working dia 500 mm, max modul 10.
 
  332
IDMA17963
MakeLiebherr
ModelLC252
YOM1995
ConditionGood Condition
PhotoSee Photo
max working dia 250 mm, max modul 6.
 
  333
IDMA17962
MakeLiebherr
ModelLC122
YOM1998
ConditionGood Condition
PhotoSee Photo
max working dia 125 mm, max modul 3.
 
  334
IDMA17944
MakePfauter,German
ModelRS3V
YOM
ConditionVery good condition
PhotoSee Photo
max. wheel diameter 1800 mm,
gear width 600 mm,
max. module 15,
min./max. milling cutter dia. 210 mm,
cutter width - max. 260 mm,
milling slide swivelling 180 Grad,
milling spindle turning speeds 30 - 120 U/min,
table hole 160 mm,
table diameter 840 mm,
draw-in arbor diameter 60 mm,
total power requirement 14,4 kW,
weight of the machine ca. 12700 kg,
base area 2978 x 890 mm2,
dimensions of the machine ca. 3,81 x 2,23 x 2,70 m
 
  335
IDMA17943
MakeCugir,Romania
ModelFD900
YOMoverhauled 2009
Conditionoverhauled
PhotoSee Photo
max. machining dia. 900mm
max. machining dia. without small column 1000mm
max. module 12mm
min. teeth no. 10
table dia. 820mm
axial travel of milling cutter 450mm
milling cutter vertical travel 200mm
milling cutter sizes (dia.x length) 190 x 210 mm
milling cutter max. helix angle +/- 45 degree
main spindle taper -Morse 5
Machine weight 12,5 tons
 
  336
IDMA17905
MakeRussian
Model5A342
YOM1968
ConditionVery good condition,Under power
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  337
IDMA17894
MakeChinese
ModelY31200C
YOM
ConditionGood Condition
PhotoSee Photo
Max workpiece dia (with rear column)- 1600mm, (without rear column)- 2000 mm, Min workpiece dia- 130 mm, Max workpiece width- 1200 mm, Max helix angle- 45 degrees, Max machine module: 1.Hobbing cutter: Steel- 24, Cast Iron- 24. 2.End Milling cutter:Steel-36, Cast iron-36. 3.Disc milling cutter: Steel-30, Cast iron-30, Hobbing cutter: Dia:310mm, Length-400 mm, Max vertical travel-1200 mm, Distance from hob head center to table plane center: Max-1175 mm, Min-100 mm, Dia of table- 1800 mm, Feed: Dia of table- 1800 mm, Total power- 25.3 kw, Length- 7920 mm, Width-2550 mm, Height-3700 mm, Weight of the machine- 33. When single indexing is processed, cycle machining can be realized automatically by using the end milling cutter and disc milling cutter. Single indexing also can be controlled manually independently. The accuracy is not less than 7 grade with gear hobbing process and 8 grade with single gear indexing. The table is centralized by hydrostatic bearing. Pressure oil is supplied through gear oil divider. The double pitch worms are used for machine. Without adjusting in radial the machine good mating condition can be achieved. The single worm transmitting is used for Y31800C machine and machines whose Dia. is larger than 8 metres and two meshed adjustable washers are worm transmitting is used for Y31800C machine and machines whose dia. is larger than 8 metres and two meshed adjustable washers are adopted. Main motor is DC motor with Britain CT speed regulation system. The machine is controlled by programmable controller and make all automatic cycling process variable and reliable.Tangential toolhead, internal end milling head, end milling head rear column.
 
  338
IDMA17877
MakePfauter,German
ModelRS3
YOM
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 1800 mm,
gear width 600 mm,
max. module 15,
min. module 1,
wheel diameter with counterstay 800 mm,
turning speeds 29,35,43,52,63,76,9U3,/1m1i4n,
table diameter 970 mm,
1 Pos.,
table longitudinal travel 1020 mm,
total power requirement 7 kW,
weight of the machine 8,5 tons.
 
  339
IDMA17869
MakeWMW Modul
ModelZFWZ1250
YOM
Conditioncan be inspected under power
PhotoSee Photo
Max. wheel diameter 1250mm ,
Gear width 600 mm ,
Max. module 14 ,
Min. module 2 ,
Diameter of hob 240 mm ,
Table surface area 1020 mm ,
Turning speed range 28-200 U/min ,
Feeds - axial 0,28 - 8 mm/min ,
Feeds - radial 0,1 - 2 mm/min ,
Feeds - tangential 0,16 - 4 mm/min ,
Support swivability left/right: +/- 45' ,
Electrics - voltage/frequency: 380/50 V/Hz ,
Total power requirement 25 kW ,
Weight of the machine ca 16 t,
Dimensions of the machine ca 4500 x 2100 x 3300 mm.
With Small Gear Hobber of Pfauter make.
 
  340
IDMA17822
MakeShibaura
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max. Wheel Dia 2400 mm,
Min. Wheel Dia 300 mm,
Module 30,
Max. Gear Width 1000 mm,
Table Size 1700 mm
 
  341
IDMA17739
MakeRussian
Model5342
YOM1975
ConditionVery good condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  342
IDMA17618
MakeCugir,Romania
ModelFD320
YOM1976
Condition
PhotoSee Photo
Max. dia. 320mm,minimum module 6,axel travel 280mm,tangential travel 100mm,with acessories change gears, instlled power 5.5 kW,wt.of machine 4.8 tons approx,overall dimensions (LXWLH)2382x1046x1850mm)
 
  343
IDMA17617
MakeCugir,Romania
ModelFD800
YOM1981
Condition
PhotoSee Photo
Max. dia.800mm,max. module 10,max. stroke of the axial feed 450mm,max. no. of teeth 10,table dia. 800mm, milling spindlecone MORSE 6,distance between piece and tool, min 90mmmax.500mm,with accesories change gears, cooling tank,voltage/frequency 330V/50Hz,installed power 13.3 kW,net weoght of machine 12 tions approx.,dimension of machine (LXWXH) 3070 x 1870 x 2355mm
 
  344
IDMA17597
MakeWMW Modul
ModelZFWZ3000 x 30
YOM1953
ConditionGood working condition
PhotoSee Photo
Working dia : 3000 mm, Max. Module : 30 mm
 
  345
IDMA17589
MakePfauter,German
Model
YOM1936
ConditionGood Condition
PhotoSee Photo
Table Size : 900 mm,
With change gears and accesories.
 
  346
IDMA17588
MakeModul
ModelZFWZ250x5N
YOM1967
ConditionGood Condition
PhotoSee Photo
Table Size : 250 mm,
Max. module : 8,
With changde gears and accesories.
 
  347
IDMA17587
MakePfauter,German
ModelRS1
YOM1954
ConditionGood Condition
PhotoSee Photo
Table Size : 500 mm,
Max. module : 8,
With changde gears and accesories.
 
  348
IDMA17565
MakeJegorjevsk,Russia
ModelEZS320
YOM1981
ConditionGood Condition ,Not under power
PhotoSee Photo
Max dia 1250 mm,
Modul 16.
 
  349
IDMA17556
MakeWMW Modul
ModelZFWZ800 x 10/II
YOM1976
ConditionVery good condition
PhotoSee Photo

Max. workpiece diameter by high capacity: 800 mm
Max. milling diameter of workpiece: 500 mm
Max. way of tangential feed: 150 mm
Max. way of axialfeed: 410 mm
Max. angle of tooth lean: 45 degree
Min. hobing number of teeths(normal): 12
Min. hobing number of teeths(special): 6
Max. module (gear milling): 10 mm
Max. hobing diameter: 195 mm
Max. hobing length: 220 mm
Table grip surface diameter: 700 mm
Table centering diameter: 200 mm H7
Table centering depth: 50 mm
Distance between mill center and table grip surface
Min.: 195 mm/ Max.: 605 mm
Distance between mill center and table center
Min.: 80 mm/ Max.: 540 mm

 
  350
IDMA17554
MakeRussian
Model5A342
YOM
ConditionVery good condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons, complete with Internal cutting attachment.
 
  351
IDMA17553
MakeRussian
Model5K328
YOM1970
ConditionGood Condition
PhotoSee Photo
Max diameter: with counterbeam 500 mm, Without counterbeam 800 mm, Max modul 10, Table: 630 mm, weight 7200 kg - 8 machines.
 
  352
IDMA17504
MakeRussian
Model5A342P
YOM1977
ConditionComplete ,good working condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  353
IDMA17498
MakeWMW
ModelZFWZ03
YOM
ConditionGood Condition
PhotoSee Photo
Max. module:
- for plain milling cutters 8,
- for forming cutters 14,
Max. diameter of gear 250 mm,
Max. axial travel 280 mm,
Max. tangential (milling) travel 160 mm,
Max. angle of teeth incline 45,
Diameter of clamping surface of table 295 mm,
Max. diameter of milling cutter 160 mm,
Max. length of milling cutter 200 mm,
Distance between clamping surface of table
and center of milling cutter 190-470 mm,
Cutter revolutions 50-400 rpm,
Rapid traverses:
- axial 1600 mm/min,
- tangential 800 mm/min,
- radial 2000 mm/min,
Machine dimensions 3930 x 3460 x 2500 mm,
Machine weight cca 8500 kg.
 
  354
IDMA17496
MakeLiebherr
ModelL402
YOM1982
ConditionGood Condition
PhotoSee Photo
Max. Dia 400mm, Module 8
 
  355
IDMA17466
MakeWMW,Germany
ModelZFWZ1500x15
YOM1959
ConditionVery good condition
PhotoSee Photo
Table dia : 800 mm, Max dia. : 1500 mm, Stroke of hobbing head : 400 mm, Module 15.
 
  356
IDMA17455
MakeTos Czech
ModelFO6
YOM1961
ConditionGood Condition
PhotoSee Photo
Module 6,
Table size 420 mm,
Max whell diameter 800 mm,
Weight 4 tons.
 
  357
IDMA17450
MakePfauter-Kapp
ModelRA300
YOM1974/1993
ConditionGood Condition
PhotoSee Photo
Max. module 8,
Max. diameter of gear 350 mm,
Max. width of gear 250 mm,
Spindle input 15 kW,
Total input 35,6 kVA,
Machine dimensions 4000 x 2200 x 1900 mm,
Machine weight 8 000 kg.
 
  358
IDMA17448
MakeTos Czech
ModelOFA32A
YOM
ConditionGood Condition
PhotoSee Photo
Max. module 7,
Max. diameter of gear 320 mm,
Vertical adjustment of tool 250 mm,
Max. weight of workpiece 250 kg,
Max. angle of teeth incline +-45,
Min./max. number of teeth 9/200,
Total input 18,5 kVA,
Machine dimensions 2460 x 1910 x 1820 mm,
Weight 5500 kg.
 
  359
IDMA17387
MakeIUG Craiova,Romania
ModelFD3600
YOM
ConditionGood condition,under power
PhotoSee Photo
Max machining dia 3500 mm,
Min machining diameter 550 mm,
Max load on the table 25000 kg,
Max module 30/40 mm,
Machined teeth number 30 540,
Hob max size dia 350x400 mm,
Installed power 48 kW,
Total weight 40 tons,
Accessories:
gear shaping device;
tool clamping(fixing) device;
change gears
 
  360
IDMA17357
MakeKoepfer
Model170
YOM
Condition
PhotoSee Photo
max.length to mill 150mm,Module 2.5,min nr of milling gears:n.6,min distance between principal spindle and half of milling cutter60mm,Vise cone: 5,collet clamping,clamping range:3-24,normal dia. of spindle mill holder:13+16mm,max.dia of milling cutter 63mm,max. thickness of milling cutter:with normal spindle 31mm,with moving spindle 46mm,max. moving of milling cutter with normal spindle 20mm,with moving spindle 30mm,Feeding speed of milling cutter from 100 to 700 rpm:9,Longitudinal feeds from 0.04 to 1.6mm per min. 9,vertical feeds from 0.06 to 1.6mm per round:8,dimensions of machine 400x850x1550mm,Wt. of machine 2.2 tons approx.
 
  361
IDMA17328
MakeRussian
Model5327
YOM1957
ConditionGood Condition
PhotoSee Photo
dia 1000 mm, modul 12 .
 
  362
IDMA17235
MakeTos Czech
Model
YOM
ConditionGood Condition
PhotoSee Photo
1. Gear Hobber - Model : FO10 -
Maximum module 10 mm, Maximum diameter without counterbeam 1000 mm, Maximum diameter with counterbeam 750 mm, Table diameter 850 mm, Minimum / Maximum height of the cutter from the table 280 MM / 740 mm, Maximum width of tooth 400 mm, Hole in table 100 mm, Milling spindle cone 150 Vertical feed 0,2 6,00 mm, Longitudinal feed 0,050 1,50 mm, Tangential feed 0,133 4,0 mm, Main motor power 10 kW Machine weight 9,4 tons, Required space 3120 x 1840 mm.
2. Gear Hobber - Model : FO6 -
Max. diameter of milled wheel 800 mm Max. milled modul 6 . Main motor output 3.7 kW Dimensions 2540x1400 mm Machine weight 4 tons.
 
  363
IDMA17203
MakeRussian
Model5A342
YOM
ConditionVery good condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  364
IDMA17136
MakeRussian
Model5A342P
YOM2008
ConditionNew
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
 
  365
IDMA16999
MakeTos Czech
ModelFO6
YOM
ConditionGood Condition
PhotoSee Photo
table dia 412.5 mm , 10 HP , 600 mm dia cap , 800 mm without tailstock , upto 190 RPM .
 
  366
IDMA16871
MakeDonini,Italy
Model
YOM1986
ConditionGood Condition
PhotoSee Photo
table size 1800 mm, swing dia 2000 mm, module 20DP, w/height 600 mm, weight 17 tons approx, with tailstock and necessary accesories.
 
  367
IDMA16863
MakeWMW Modul
ModelZFWZ250/3
YOM1974
ConditionGood Condition
PhotoSee Photo
Dia. of workpiece 250mm,module6,max.axial feeding travel 275mm,max. tangential feeding travel 275mm,tangetial feeding travel(hob shift)100mm,helix angle 45dgree,no. of teeth cut:8,no.of teeth cut using the indexing:4,workpiece dimensions-max. hob dia.145mm,hob length 170mm,dia. of tightening surface of a table 275mm,dia.of centering element of a table 200mm,depth of a centering element of a table 75mm,distance from the hob center to surface of work table min.195mm,max.470mm,distance from hob center to the center of work table min.20mm,max.230mm,cone of hobbing 45,hob speed 50-200 rev/min.,hob speed variable in 2 ranges:125-400 rev/min,main motor 7.5kW,poer consumption 20kW,50Hz 380V,machine dimension-3000x3475x2200mm,Wt.of machine-5.5 tons.(2 machines)
 
  368
IDMA16711
MakeKolomna Russia
Model5363
YOM1965
ConditionWorking
PhotoSee Photo
Max diameter of detail 3200 mm,
Min diameter of detail - 800 mm,
Max width of detail - 1600 mm,
Max details weight 25000 kg.
 
  369
IDMA16658
MakeRussian
Model5342
YOM1967
ConditionGood Condition
PhotoSee Photo
Diameters of machined gears max 2000 mm, Maximum length of machined gears, 700 mm, Module of machined gears 25 mm- cast iron)

Technical condition -excellent
Retrofitted with new electric system in 2008

with change gear set, arbours & cutter.
With backcolumn
Detailed machine tool Description
Table diameter, mm 1750
Maximum hob dimensions (diameter x length), mm 250x300
Number of hob spindle speeds 20
Hob spindle rotation frequency, rpm 11.2-100
Main drive power, kW 14
Rapid travel power, kW 4.5
Overall dimensions, mm 5916x2876x 3250
Weight, kg 24000

ACCESSORIES:
Many Change Gears
Internal gear cutter
Support - various
Manuals
 
  370
IDMA16651
MakeRussian
Model5342
YOM1970/2008
ConditionExcellent,Fully reconditioned
PhotoSee Photo
Diameters of machined gears max 2000 mm, Maximum length of machined gears, 700 mm, Module of machined gears 25 mm- cast iron)

Technical condition -excellent
Retrofitted with new electric system in 2008

with change gear set, arbours & cutter.
With backcolumn
Detailed machine tool Description
Table diameter, mm 1750
Maximum hob dimensions (diameter x length), mm 250x300
Number of hob spindle speeds 20
Hob spindle rotation frequency, rpm 11.2-100
Main drive power, kW 14
Rapid travel power, kW 4.5
Overall dimensions, mm 5916x2876x 3250
Weight 24 tons

ACCESSORIES:
Many Change Gears
Internal gear cutter
Support - various
Manuals
 
  371
IDMA16569
MakeTos Czech
ModelOFA71A
YOMnew in 1985/1986
Conditiongood working,little used
PhotoSee Photo
Max. geardia. 710mm,Modul 10,mostly for bronze worm gears, with change gears,tangential head,with chip conveyor.
 
  372
IDMA16521
MakeRussian
Model5A342P
YOM1986
ConditionComplete ,good working condition
PhotoSee Photo
Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons .
 
  373
IDMA16506
MakeRussian
Model546M
YOM1968
ConditionGood Condition
PhotoSee Photo
Work piece dia 2250-5000 mm,
Max. module of the wheels 16 mm,
Number of cogs 120-800,
Table dia 3800 mm,
Distance between the table and the mill axis 550-950 mm,
Max. table load capacity 40 tons,
Cutting accuracy - Fpr - 2,5 fur - 0,6-0,7,
The machine weight 75,1 tons,
Gear hobbing master-machine for finshing worm-wheels of the high accuracy.
 
  374
IDMA16094
MakePfauter,German
ModelP900
YOM
ConditionGood Condition
PhotoSee Photo
Gear Diameter Maximum 900 mm
Face Width Maximum 500 mm
Module - Maximum 10 Mod
Number of Teeth (Single Start) - Minimum 8
Number of Teeth (Double Start) - Minimum 4
Distance Table to Outer Steady
Maximum 910 mm
Minimum 465 mm
Distance Table to Hob Spindle
Maximum 550 mm
Minimum 50 mm
Hob Diameter - Maximum 192 mm
Hob Width - Maximum 220 mm
Cone of Hob Arbor MK 5
Hob Shifting - Maximum 200 mm
Diameter of Table 698 mm
Diameter of Table Bore 160 mm
Hob Speeds, Infinitely Variable 60 - 300 RPM
Feeds Axial : 0, 40-6, 3 mm/rev
Radial 0, 1-1, 60 mm/rev
Tangential 0, 14-2, 24 mm
Voltage 380/3/50
Main Drive Motor 11 kw
Total Power Required 20 kva
Approximate Weight 8.5ton (18,743 Lbs.)
 
  375
IDMA16091
MakeCugir,Romania
ModelFD1250
YOM1976 / 2008
ConditionGood Condition
PhotoSee Photo
Max. working diameter-with tailstock 1250 mm
Without tailstock 1500 mm
Max. module 16
Max. stroke 650mm
Axial travel of milling head 600 mm
Main motor power 15 kw
Overall dimensions 4775 x 3100 x 3390 mm
weight-aprox 20.5 tons.

The machine was retrofitted with new electric system in 2008.
The machine was overhauled partly.
 
  376
IDMA15234
MakeRussian
Model5K32P
YOM
ConditionGood Condition
PhotoSee Photo
max wheel diam - 800 mm,
gear width -350 mm,
max module -10,
dimensions 2650 x1450 x 2000 mm,
weight 7200 kg.
 
  377
IDMA15233
MakeRussian
Model5K32
YOM
ConditionGood Condition
PhotoSee Photo
max wheel diam - 800 mm,
gear width -350 mm,
max module -10,
dimensions 2650 x 1450 x 2000 mm,
weight 7200 kg.
 
  378
IDMA15232
MakeCugir,Romania
ModelFD800
YOM
ConditionGood Condition
PhotoSee Photo
Max. Dia. 800 mm,
Max. module of teeth 10,
Axial travel of miling head 450 mm,
Min. number of teeth 8.
 
  379
IDMA15180
MakeRussian
Model5K328A
YOM1971
ConditionGood Condition
PhotoSee Photo
dia with support 850mm,dia without support 1350mm,Max. Module 12mm,Max. face width of spur gear 560mm,Min. number of teeth machined 20mm,Max. mass if gear blank machined 2000 kg,Table working surface 935mm,Main Motor 10 kW,Overall Dimensions 3560 x 1790 x 2590 mm,Weight 14 tons
 
  380
IDMA15045
MakeChinese
ModelY3180K
YOM
ConditionBrand New
PhotoSee Photo
Maxwork plece dia.(wiht/without work stay)620/800mm
Max.module(steel/cast iron)8/10mm
Max.width of teeth 300 mm
Max.hob diameter.length180/175mm
Dia.of worktable 625mm
Spindle speed/steps 40-250rpm/9
Max.hob shift axial 55mm
Main motor 5.5kw/1500rpm
Taper of hob arbor fitting Morse 5
Distance between hob axis and worktable surface 240-590mm
center distance between hob and worktable surtace 400-720mm
Distance between tailstock end face and worktable surface 400-720mm
Worktable bore diameter 80 mm
Max.hob swiveling angle 240
Dia.of hob arbors dia 22.27.32.40mm
Work arbor dia 35 mm
Overall dimensions 260014001940mm
Gross weight /Net weight 6300kg/5700kg
Accessories and tools hob arbor addembliesφ22.φ27.φ32.φ40one for each;a complete set of change gears;tools, The machine is suitable for large batch and single production of cylindrical spur and helical gears,worm gears and sprocket.
The machine is characteriaed by good rigidity, high working accuracy,easy in operation and maintain.
The machine can be operated not only with forward and backward cutting,but also with axical or radial feed.
The machine can be equipped with simens CNC system according to use's request to cut crown and slightly tapered gears.
 
  381
IDMA15044
MakeChinese
ModelY3150K
YOM
ConditionBrand New
PhotoSee Photo
Max.workpiece dia 500 mm
Max.module 8 mm
Max.width of teeth 250 mm
Max.hob diameter/length160/160 mm
Dia of worktable 510 mm
Spindle speed/steps 40-250 rpm/ 9
Dia of hob arbors22.27.32.40 mm
work arbor 30mm
Max .hob shift axial 55 mm
Main motor 5.5kw/1500rpm
Overall dimensions 245012721790mm
Taper of hob arbor fitting Morse No.5
Distance between hob axis and worktable surface 235-535mm
center distance between hob and worktable 20-330mm
Distance between tailstock end face and woektable surface 380-850mm
Worktable bore diameter 80 mm
Max.hob swiveling angle 240, The machine is suitable for large batch and single production of cylindrical spur and helical gears,worm gears and sprocker.
The machine is characteriaed by good rigidity,high working accuracy, easy in operation and maintain.
The machine can be operated not only with forward and backward cutting ,but also with axical or radial feed.
The machine can be equipped with simens CNC system according to user's request to cut crown and slightly tapered gears.
 
  382
IDMA14200
MakeMuir
Model228
YOMEarly 1970''''s
ConditionGood Condition
PhotoSee Photo
Max workpiece diameter.(30ft) 9144mm,
Max face width (7ft)2133mm,
Table diameter. (9ft) 2743mm,
Hob feeds.(6)0.048ins-0.116ins,
Hob speeds variable - DC Drive,
Max Hob size 250 mm(10) dia. x 225 mm(9) long,
Hob shift manual,
Main motor x 2 - 15 HP Each.
Electrics:400-440-3-50,
Complete With:
Power rotary table
Spiralling ratio.
Prime gears.
Compensation gear.
Hob arbor.
Power to hob Swivel,
Change gears.
Coolant.
Imperial machine,
Electrics 400/440, 3, 50,
Approximate Dimensions: 40 Long x 14 Deep x 18 High.
 
  383
IDMA14124
MakeIUG Craiova,Romania
ModelFD3600
YOM1985
ConditionGood Condition
PhotoSee Photo
Gear Diameter 3600 mm,
Min. Gear Diameter 690 mm,
Max. Module (max 3000 mm Gear Dia) 30 MOD,
Max. Module (3000-3500 mm Gear Dia) 25 MOD,
Min. Number of Teeth 30,
Max. Number of Teeth 540,
Max. Distance between centerline of Cutter and Work 2000 mm,
Radial Feed .13 to 2.8 mm/rev,
Axial Feed .34 to 7.5 mm/rev,
Max. Diameter and Length of Cutter 350 mm x 400 mm,
RPM of Hob 5-60,
Hob Swivel - 45,
Max. Vertical Travel 1000 mm,
Diameter of Table 1900 mm,
Max. Workpiece Weight 25,000 kgf,
Capacity of Main Motor 15 Kw,
Power Capacity in Total, 380V, 3 Phase - approx. 70 Kw,
Space Required (L x W x H) 16,400 x 5,000 x 3,650,
Weight of Machine, Approx. 52 Tons.
 
  384
IDMA12592
MakePfauter,German
ModelP400
YOM1977
ConditionComplete,very good condition
PhotoSee Photo
dia 400 mm,
Module 8 mm,
Max height 310 mm,
Weight 6.5 tons.

 
  385
IDMA9378
MakeLiebherr
ModelL402
YOM1976
Condition
PhotoSee Photo
Workpiece dia with hob dia 188-394 mm, max. workpiece dia with hob dia 100-483 mm,max. pitch 2.5 DP,hob slide travel 295mm, work table dia 413mm, pitch dia 398mm, table bore dia 98.4 mm,min. distance between hob & table centre 29.5 mm,max. distance between hob & table centre 295.25 mm,max. hob dimensions:dia 189 mm, max. hob dimensions:length 246 mm,max. hob shift travel 196.75 mm, hob spindle speed ranges 60-480 RPM, machine weight 21 tons, differential extra gear, hob shift, extra tooling, push button controls 220 or 440/3 Phase AC Motor.
 
  386
IDMA7378
MakeRussian
Model53B05PB
YOM2000
ConditionNew
PhotoSee Photo
10 machines
 
  387
IDMA7233
MakeRussian
Model53B05PB
YOM2004
ConditionNew
PhotoSee Photo
 
  388
IDMA5516
MakeChinese
ModelY31200E
YOM1986
ConditionNew ,Unused
PhotoSee Photo
dia 2000mm, modul 20
 
  389
IDMA37
Make
ModelL301
YOM1972
Condition
PhotoSee Photo
dia. 300mm, modul 6, no of tooth 3, Work table dia 315mm, Table bore 80mm, Min. dist. between hob and table center 25mm, Max. dist. Between hob and table center 225 mm, Clamping height above worktable 165 mm, Marking arbor taper Morse 4
 
  390
IDMA2942
Make
Model53A11
YOM
Condition
PhotoSee Photo
Semi-automatic Gear Milling Machine, degree of accuracy of processing on control wheel Z 81, module of grinding gera 14mm, dia of processable gears 1250mm, with a supporting support (countersupport) 800, no of gear tooth 16, dia of installed worm mills 22
top