Category : Grinding Machines

Sub-Category : Grinder Cylindrical

Total Machines Found : 123

Select | Machine Details
 
  1
IDMA34968
MakeSTANKO
Model3A172
YOM1976
ConditionGood Condition
PhotoSee Photo  |  See Video
Workpiece:- 560 mm
Distance between centers :- 4000 mm
Weight of machine is 23,4 ton.
 
  2
IDMA34901
MakeTOS
ModelBUB40B NC/3000
YOM2004
ConditionGood Condition
PhotoSee Photo
Center Distance : 3000 MM
Swing - 400 MM
 
  3
IDMA34880
MakeTos Hostivar
Model
YOM1989
ConditionGood Condition
PhotoSee Photo
1)Model: BUB40
Grinding diameter - 400mm
Centers distance - 1500mm
2)Model: BUB 32
Grinding diameter - 320mm
Centers distance - 1500mmQuantity:
 
  4
IDMI7812
MakeFrance Sit
ModelU700
YOM
ConditionGood Condition
PhotoSee Photo
Grinding Lenght :700mm
Center Height : 150mm
Swing dia : 300mm
Max. Wheel Speed :40,000rpm
Spindle Motor Power : 4KW
Weight : 2500kg
 
  5
IDMA34823
MakeTos Hostivar
ModelBUB40/1500
YOM
ConditionGood Condition
PhotoSee Photo
Grinding diameter - 400 mm
Centers distance - 1500 mm
 
  6
IDMA34822
MakeTos Hostivar
ModelBUB 32/1500
YOM
ConditionGood Condition
PhotoSee Photo
There are 2 such machines.
Grinding diameter - 320mm
Centers distance - 1500mm
 
  7
IDMA34819
MakeStuder
ModelS30-1
YOM
ConditionGood Condition
PhotoSee Photo
Centers distance - 650 mm
Centers height - 125 mm
Workoiece's weight -130kg
 
  8
IDMA34801
MakeTos Czech
Model
YOM1989
ConditionGood Condition
PhotoSee Photo
1) Model:BUB40
Workpiece's diameter - 400mm
Center distance - 1500mm
Grinding diameter - 10..120mm
2)Model:BUB32
LENGTH: 1M
CENTER HEIGHT: 160MM
SWING: 320 MM
 
  9
IDMA34800
MakeRussian
Model3A172
YOM1962
ConditionGood Condition
PhotoSee Photo
Workpiece Ř, 560 mm
Distance between centers:4000 mm
Weight of machine is :23,4 ton
 
  10
IDMI7785
MakeChurchill
Model
YOM1987
ConditionGood Condition
PhotoSee Photo
Swing Over Table:400 mm
Maximum Grinding Diameter:400 mm
Max. Grinding Length:1500 mm
Grinding Wheel Size:40 mm
Center Height:200 mm
 
  11
IDMA34717
MakeTos Hostivar
ModelBUT63/3000
YOM1969
ConditionGood Condition
PhotoSee Photo
Height of centres 320 mm
Workpiece Ř, min. / max. 80 – 630 mm
Distance between centers 3.300 mm
Weight of machine is 14,5 ton.
 
  12
IDMI7764
MakeAcross
Model
YOM
ConditionGood Condition
PhotoSee Photo
Running on foundation
Length: 1500 mm,
Center height: 175 mm
 
  13
IDMA34640
MakeSchaudt,Germany
ModelAR1000
YOM
ConditionGood Condition
PhotoSee Photo
Center distance - 1000mm
Workpiece's diameter - 450mm
Grinding wheel diameter - 500mm
Weight - 5000kg
 
  14
IDMA34607
MakeChurchill
Model
YOM
ConditionGood Condition
PhotoSee Photo
Swing Over Bed 40” / 1016mm
Distance Between Centres 144” / 3658mm
Tailstock
Rotating Work Head
Linishing Attachment
2 off Work Holding Steadies
Coolant Tank & Pump
Modern Electrics and Pendant Control
Swivel Table
 
  15
IDMA34601
MakeCincinnati,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
SWING OVER TABLE, MAXIMUM ................ 10.937"
GRINDING DIAMETER, MAXIMUM ............... 10"
DISTANCE BETWEEN CENTERS, MAXIMUM ........ 96"
GRINDING WHEEL DIAMETER, STANDARD ........ 30"
GRINDING WHEEL WIDTH, MAXIMUM ............ 3"
GRINDING WHEEL HOLE DIAMETER ............. 20"
TABLE SWIVEL TAPER TOWARD WHEELHEAD ...... 2.75" TPF
TABLE SWIVEL TAPER AWAY WHEELHEAD ........ 1" TPF
TABLE SWIVEL ANGLE TOWARD WHEELHEAD ...... 6-DEGREES
TABLE SWIVEL ANGLE AWAY WHEELHEAD ........ 2-DEGREES
WORKHEAD AND TAILSTOCK CENTER TAPERS ..... #12 B&S
TABLE LONGITUDINAL FEEDS, INFINITE ....... 3 TO 220 IPM
GRINDING WHEELHEAD SPINDLE MOTOR ......... 15 HP/1760 RPM
FLOOR SPACE REQUIRED, L X D .............. 290" X 84"
WEIGHT, APPROXIMATELY .................... 15100 LBS
EQUIPPED WITH:
WORKHEAD - LEVER TYPE TAILSTOCK
FILMATIC SPINDLE BEARINGS
SOME FOLLOW RESTS
COOLANT SYSTEM (BUILT-IN)
 
  16
IDMA34560
MakeWMW
ModelSU315x2000
YOM
ConditionGood Condition
PhotoSee Photo
Distance between centers: 2000 mm
Grinding diameter: 315 mm
Work piece rotating speed: 22 - 500 rpm
Grinding spindle speed: 1340 / 1675 / 1910 rpm
Grinding wheel:
-Max diameter: 500 mm
-Max width: 125 mm
-Hole: 203 mm
Dimensions:
-Length: 590 cm
-Width: 170 cm
-Height: 180 cm
-Weight: 6,6 tn
 
  17
IDMA34546
MakeStuder
ModelS40-4
YOM
ConditionGood Condition
PhotoSee Photo
CNC - Siemens 3G
Centers height - 125mm
Center distance - 650mm
Grinding wheel diameter - 400mm
Weight - 3600kg
 
  18
IDMA34533
MakeWMW
Model
YOM
ConditionGood Condition
PhotoSee Photo
Working Diameter: 350mm
Working length: 2500 mm
 
  19
IDMA34510
MakeStanko-Russia
Model3U144
YOM1992
ConditionGood Condition
PhotoSee Photo
Grinding diameter - 400 mm
Grinding length - 2000 mm
 
  20
IDMA34472
MakeGrisetti,Italian
ModelRU/AURS2050
YOM
ConditionGood Condition
PhotoSee Photo
MAX. GRINDING LENGTH 2000 mm.
CENTRES HEIGHT 190 mm.
WHEEL DIMENSIONS Ř 500 mm.
OVERALL DIMENSIONS 5300 x 2000 x 1900 mm.
ACCESSORIES
Marposs
Coolant
 
  21
IDMA34452
MakeWMW-VEB
ModelSU315x2500
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter: 315 mm,
Max. Between centers: 2500 mm,
Lift - Right:6200 mm,
Front - back: 2100 mm
Weight: 800 kg
 
  22
IDMI7703
MakeChurchill
Model
YOM
ConditionGood Condition
PhotoSee Photo
CENTRE HEIGHT 175 MM
GRINDING DIAMETER 350 MM
CENTRE DISTANCE 2750 MM
TOTAL POWER REQUIREMENT 12KW
WEIGHT OF THE MACHINE CA. 7.5 TON
DIMENSIONS OF THE MACHINE CA. 6300 x 2200 x 1600 MM
 
  23
IDMI7702
MakeTOS
ModelBUT33x3000
YOM
ConditionGood Condition
PhotoSee Photo
WHEEL DIAMETER 125 x 710 MM
CENTRE HEIGHT 625 MM
CENTRE DISTANCE 3000 MM
TOTAL POWER REQUIREMENT 20 KW
WEIGHT OF THE MACHINE CA. 14 TON
 
  24
IDMI7701
MakeWMW
Model
YOM
ConditionGood Condition
PhotoSee Photo
WHEEL DIAMETER 600 MM
WHEEL WIDTH 60MM
CENTRE HEIGHT 200 MM
CENTRE DISTANCE 2000 MM
TOTAL POWER REQUIREMENT 15 KG WT
WEIGHT OF THE MACHINE CA. 7500 KG
DIMENSIONS OF THE MACHINE CA. 4000 X200 X2800 X1600
 
  25
IDMA34385
MakeLandis
Model
YOM
ConditionGood Condition
PhotoSee Photo
FEATURES:
JOURNAL RESTS
SWIVELING TRAVELING TABLE
WHEEL DRESSER
CAPACITY:
MAX. WORK SWING : 641 MM
MAX. DISTANCE BETWEEN CENTERS :4877 MM
MAX. RECOMMENDED WEIGHT ON CENTERS : 4536 KG.
STANDARD WHEEL SIZE : 762 MM X 76 MM X 305 MM
WHEEL DRIVE MOTOR : 19 KW
WORK CENTER DIAMETER : 64 MM
WORK CENTER TAPER : NO. 20 JARNO
WORK SPEEDS : 25-100 RPM
TRAVERSE SPEEDS : 76 MM-5080 MM/MIN
CARRIAGE TRAVERSE PER HANDWHEEL TURN : 1 MM-.9525 MM
FLOOR SPACE REQUIRED : 2692 MM X 13411 MM
APPROX. MACHINE WEIGHT : 22453 KG.
EQUIPPED WITH:
JOURNAL RESTS
SWIVELING TRAVELING TABLE
WHEEL DRESSER
 
  26
IDMA34362
MakeHercules,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:
Max. grinding diameter: 750mm
Minimum grinding diameter: 10mm (0.4")
Max. grinding length: 3200mm (128")
Grinding wheel: 750mm x 80mm x 305mm
Wheel head speeds variable 40 – 1500rpm
Work head speed 6 – 45rpm
Machine Equipped with:
Various steadies
Coolant and clarifier
Balancing stand
Note:
Modernised to Siemens Sinumerik S7 in 1998
Reconditioning of grinding motor in 1998
Machine to be:
Centres raised to swing 36"
Chuck to be fitted to work head
Machine delivered to Sheffield cleaned, run, checked and prepared for the above work.
Electrical Supply:
3 phase, 50 cycles, 380 volt
 
  27
IDMA34354
MakeSTANKO
Model3M175
YOM1987
ConditionGood Condition
PhotoSee Photo
Max. work-piece dimensions:
 -Diameter / length: 400/2800 mm
Max. grinding dimensions:
 -Diameter / length: 400/2520 mm
Max. work-piece weight: 1000-15 mm
Max. length of table travel: 2800 mm
Height of centres above the table: 210 mm
Accuracy class in accordance with GOST 8: P
Spindle cone of headstock and tailstock in accordance with GOST 25557: Morse 6
End of grinding spindle in accordace with GOST 2323 (conicity 1:5):
 -Nominal diameter: 100h11 mm
 -Diameter of support necks: 110f7 mm
Max. grinding wheel dimensions:
 -Diameter external / internal: 750/305 mm
 -Height: 80 mm
Spindle rotation frequency of grinding headstock: 1270 min-1
Work-piece rotation frequency (stepless adjustment):
 -Max.: 180 min-1
 -Min.: 20 min-1
Circular speed of grinding wheel: 50 m/sec
Max. turn angle of upper table:
- Clockwise / counterclockwise: 2 / 4 deg
Total power of electric motors: 26,19 kW
Power supply: 3-phase, 380 V, 50 Hz
Overall dimensions with separately located equipment:
 -Length: 8310 mm
 -Width: 3690 mm
 -Height: 2135 mm
Net weight: 13850 kg
 
  28
IDMA34328
MakeLandis
Model
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
Plunge Feed
TruForm Semi-Automatic Wheel Dresser
Headstock & Tailstock W/Centers
Spark-Out Timer
Wheel Mount Centers
5-1/4" Wide Wheel Guard
7-1/2 HP Wheelhead Motor
Handwheel Traverse
Coolant System
SPECIFICATIONS:
Nominal Work Swing: 6"
Nominal Distance Between Work Centers: 18"
Max. Diameter Work Standard Machine Will
Grind With Full Size Standard Wheel: 6 7/8"
Floor Space Required: 106" x 50"
Traverse Speed: 2" - 240"/Min.
Grinding Wheel Size (Standard): 16" x 1" x 5"
Grinding Wheel (Max. Width): 3"
Headstock Work Center: #10 Jarno
Footstock Work Center: #6 Jarno
Approx. Weight (W/Hyd. Traverse & Hyd. Infeed): 4,150 lbs
 
  29
IDMA34312
MakeBerco
Model
YOM
ConditionGood Condition
PhotoSee Photo
N° 1 CILINDER GRINDING BRAND BERCO TYPE RGTP 3000 HP. 250 mm Diametr work mm 500 Diameter Wheels mm 700
RED OUT

N° 1 CILINDER GRINDING BRAND BERCO TYPE RGTP 2200 HP. 300 Diameter work mm 600 Diametr Wheels mm 700
Wheight kg. 7.000
 
  30
IDMI7633
MakeTos Hostivar
ModelBUC63A
YOM1981
ConditionGood Condition
PhotoSee Photo
Grinding length - 3000 mm
Grinding dia - 630 mm
Centre height - 315 mm
Work piece weight - 2500 kg
Grinding wheel – 750 mm x 100 mm x 305 mm
Grinding spindle speed - 840 / 970 U/min
Work piece spindle speed - 8-315 U/min
Table speed –stepless – 0.01 - 3,6 m/min
Grinding head swiveling – 90 o , taper Morse 6 
Grinding spindle drive - 15 kW
voltage/frequency – 380 V / 50 Hz
weight of the machine – 13,700 kgs
dimensions of the machine - 10,000 mm x 3400 mm x 2000 mm
total power requirement- 31 KVA
 
  31
IDMI7628
MakeJohnshipmen
Model
YOM
ConditionGood Condition
PhotoSee Photo
1000 X 125
250mm
Good running condition
 
  32
IDMI7627
MakeMatrix
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Center height - 130
Abc - 500
Running Good Condition
 
  33
IDMA34158
MakeSTANKO
Model3M175
YOM1979
ConditionGood Condition
PhotoSee Photo
Max. work-piece dimensions:
 -Diameter / length: 400/2800 mm
Max. work-piece weight: 1000-15 mm
Max. length of table travel: 2800 mm
Height of centres above the table: 210 mm
Max. grinding wheel dimensions:
 -Diameter external / internal: 750/305 mm
 -Height: 80 mm
Spindle rotation frequency of grinding headstock: 1270 min-1
Work-piece rotation frequency (stepless adjustment):
 -Max.: 180 min-1
 -Min.: 20 min-1
Circular speed of grinding wheel: 50 m/sec
Max. turn angle of upper table:
- Clockwise / counterclockwise: 2 / 4 deg
Total power of electric motors: 26,19 kW
Power supply: 3-phase, 380 V, 50 Hz
Overall dimensions with separately located equipment:
 -Length: 8310 mm
 -Width: 3690 mm
 -Height: 2135 mm
Net weight: 13850 kg
 
  34
IDMA34157
MakeTOS
ModelBUC63A
YOM
ConditionGood Condition
PhotoSee Photo
Center distance - 4000 mm
Grinding diameter - 630 mm
Grinding wheel diameter - 750 mm
Grinding wheel thickness - 100 mm
 
  35
IDMA34154
MakeToyado
ModelGS 630-400
YOM1983
ConditionGood Condition
PhotoSee Photo
4000mm X 630MM
 
  36
IDMI7554
MakeChurchill
Model
YOM
ConditionGood Condition
PhotoSee Photo
BETWEEN CENTERS: 1200MM
SWING DIA : 300MM
CENTER HEIGHT : 150MM
 
  37
IDMI7496
MakeRibon
ModelRUR-1000
YOM
ConditionGood Condition
PhotoSee Photo
Grinding Length: 1000 Mm
Center Height: 150 Mm
Swing: 300 MM
 
  38
IDMI7468
MakeEngland
Model
YOM1990-92
ConditionGood Condition
PhotoSee Photo
swing over bed 405mm,
maximum distance between centres 1600mm,
wheel speeds 1750mm,
wheel size 400 x 40mm,
work head speeds 23 – 260rpm,
1 axis DRO, live and dead centre on the work head,
approximate dimensions 4000 x 1700 x 1700mm, approximate weight 5000k
 
  39
IDMA34025
MakeTos Hostivar
ModelBUC63
YOM1990
ConditionGood Condition
PhotoSee Photo
630 x 4000 mm
 
  40
IDMA33865
MakeSchaudt,Germany
ModelA501N1000
YOM1991
ConditionGood Condition
PhotoSee Photo
350x1000mm
 
  41
IDMI7376
MakeWMW
Model315/1000
YOM
ConditionGood Condition
PhotoSee Photo
Between Center - 1000mm
With Internal
 
  42
IDMI7375
MakeOverbeck
Model
YOM
ConditionGood Condition
PhotoSee Photo
600 length 140 center
 
  43
IDMI7374
MakeJohnshipmen
Model
YOM
ConditionGood Condition
PhotoSee Photo
250 x 500 mm
 
  44
IDMI7372
MakeStuder
ModelS40
YOM
ConditionGood Condition
PhotoSee Photo
WHEEL DIAMETER 500 MM
CENTRE HEIGHT 175 MM
CENTRE DISTANCE 1000 MM
TOTAL POWER REQUIREMENT 0,785 kW
WEIGHT OF THE MACHINE CA. 4000 KG
DIMENSIONS OF THE MACHINE CA.
 
  45
IDMI7370
MakeNorton
Model
YOM
ConditionGood Condition
PhotoSee Photo
ABC : 600mm
CH : 140mm
Swing : 280mm
With Internal grinder attachment
 
  46
IDMI7369
MakeCincinnati,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
ABC : 600mm
CH : 140mm
Swing : 280mm
With Internal grinder attachment
 
  47
IDMA33777
MakeStuder
ModelS40-2
YOM
ConditionGood Condition
PhotoSee Photo
Center height - 175 mm
Center distance - 1600 mm
Grinding diameter - 350 mm
Dimensions - 4000x2000x2000 mm
Weight - 5500 kg
 
  48
IDMI7343
MakeGendron
Model
YOM
ConditionGood Condition
PhotoSee Photo
With tespa in process grinding gauge between center 1000mm
6" center height
 
  49
IDMA33502
MakeSTANKO
Model3A164A
YOM
ConditionGood Condition
PhotoSee Photo
Max. workpiece diameter- 400 mm
Max. workpiece length- 2800 mm
Max. grinding length- 2500 mm
 
  50
IDMA33400
MakeTos Hostivar
ModelBH25/630
YOM
ConditionGood Condition
PhotoSee Photo
Swing diameter 250 mm
630 mm distance between centers
Workpiece weight 300 kg
Grinding wheel 600x80x305 mm
The biggest width of grinding wheel 150 mm
Swing open the armrest 110 mm
Morse 5
Grinding spindle rotation ± 45 degrees
Grinding spindle speed 1430.1650 rpm
Speed drive spindle:
I range from 18 to 112 / min
II range 90-560 / min
The smallest longitudinal movement of table 1 mm
Table speed infinitely controllable 0.05-5 m / min
Lateral movement of the grinding spindle 415 mm
Fast Delivery 60 mm hydraulic
Electric grinding spindle 19 kW
Dimensions 4080x2370 mm
Machine weight 4700 kg
 
  51
IDMA33367
MakeWMW Erfurt,Germany
ModelBWF SI6 A-S x 710
YOM1977
ConditionGood Condition
PhotoSee Photo
Minimum / maximum internal diameters ground: Up to 500 mm
Maximum external diameter ground: 400 mm
Maximum depth ground: 500 mm
Maximum length of work piece 1500 mm
Maximum length of work piece with in cycle face grinding 275 mm
Maximum swivel of work head: ± 30 deg
Maximum swing inside splash-guard: 500 mm
 
  52
IDMA33275
MakeTOS
ModelBUB40/1500
YOM
ConditionGood Condition
PhotoSee Photo
Workpiece's diameter - 400mm
Center distance - 1500mm
Grinding diameter - 10..120mm
 
  53
IDMA33202
MakeTOS
ModelBUC 63-3000
YOM
ConditionGood Condition
PhotoSee Photo
Grinding diameter - 630mm
Grinding length - 3000mm
Workpiece's weight - 2500kg
Machine's weight - 13000kg
 
  54
IDMI7201
MakeAMBA
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Cylindrical 450 mm
 
  55
IDMA32967
MakeTos Hostivar
ModelBUC63A/4000
YOM
ConditionGood Condition
PhotoSee Photo
Swing dia. : 630 mm
Working length : 4000 mm
Grinding Wheel : D750 x 100 x 305 mm
Machine weight : 17.4 tons
 
  56
IDMA32893
MakeTos Czech
ModelBUA31/1500
YOM1965
ConditionGood Condition
PhotoSee Photo
Grinding diameter - 315 mm
Grinding length - 1500 mm
Clamping chuck diameter - 190 mm
Dimensions - 4500 x 2100 x 1600 mm
Weight - 4800 kg
 
  57
IDMA32892
MakeKellenberger
ModelU1500
YOM
ConditionGood Condition
PhotoSee Photo
Center height - 175 mm
Center distance - 1500 mm
Grinding wheel diameter - 400 mm
Grinding wheel width - 50 mm
Dimensions - 3000 x 1700 x 1400 mm
Weight - 2500 kg
 
  58
IDMA32886
MakeRussian
Model3M194
YOM1978
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter, mm 560
Min. work piece diameter, mm 40
Max. work piece length, mm 4000
Max. grinding length, mm 3800
Max. work piece weight, kg 3000
Size of grinding wheel, mm:
- outer diameter 400...750
- width 100
- inside diameter 305
Speed of work, rpm 12...120
Speed grinding wheel, rpm 600...1200
Traverse speed of table, m/min 22...50
Max. table stroke, mm 4240
Min. table stroke, mm 110
Table inclination, degrees:
- clockwise 0,3
- counterclockwise 6
Headstock rotation speed, rpm 8...80
Grinding head movement, m/min 0,46
Table movement speed, m/min 0,05...3,7
Total power required, kW 42
Machine dimensions, mm 14065 x 3615 x 2450
Machine weight, kg 34300
 
  59
IDMI7154
MakeTos Czech
ModelBUT 63/3000
YOM
Conditionexcellent working condition
PhotoSee Photo
Max. Job Diameter - 630 mm
Max. Job Length - 3000 mm
Grinding Wheel Size - 750 mm Diameter x 150 mm Width x 305 mm Bore
Max. Weight between Centres - 2,500 kg.
Table Speeds - 0.05 m/min to 5.0 m/min
Work-head Speeds - 9 rpm to 156 rpm
Total Weight of Machine - 16 tons (Approximately)
- With 2 nos. x Steadies, wheel dresser etc.
- With lots of accessories like centres, coolant tank, coolant pump, wheel balancing stand etc.
 
  60
IDMI7153
MakeFerrari (Italy)
Model
YOM
Conditionexcellent working condition
PhotoSee Photo
Center Height - 180 mm
Max. Length of Job - 1000 mm
Max. Diameter of Job - 360 mm
Grinding Wheel Size - 450 mm Diameter x 75 mm Width
Work-head Speeds - 23 rpm to 265 rpm
- Complete with 3 x 2-point steady, wheel balancing stand etc.
- Complete with Straight and Angular Wheel Dressers.
- Complete with chuck, coolant pump & tank etc.
- With lots of different types of centres and other accessories etc.
- Hydraulic Rapid Forward/Backward Movement of Wheel-Head.
- Equipped with Hydraulic Tailstock
 
  61
IDMA32700
MakeTos Czech
ModelBUB40/1500
YOM1985
ConditionGood Condition
PhotoSee Photo
Work piece's diameter - 400 mm
Center distance - 1500 mm
Grinding diameter - 10..120 mm
 
  62
IDMA32676
Make
Model3M175
YOM1987
ConditionGood Condition
PhotoSee Photo
Workpiece's diameter - 400mm
Workpiece's length - 2800mm
Weight of the machine - 13800kg
 
  63
IDMA32414
MakeKellenberger
ModelRS175x1500
YOM
ConditionGood Condition
PhotoSee Photo
Grinding area : 175x1500mm
Grinding width : 250mm
Grinding wheel diameter : 450mm
Center height : 125mm
 
  64
IDMA32411
MakeTos Hostivar
ModelBUT63/3000
YOM1968
ConditionGood Condition
PhotoSee Photo
Height of centres 320 mm Workpiece Ř, min. / max. 80 – 630 mm
Max. Distance between centers 3.300 mm Grinding length /
Table travel : 3,300 mm
Weight of workpiece, max. approx : 2,000 kg
Grinding wheel dia. x width 750 x 150 mm Cross travel of grinding slide 420 mm,Infeed amount of grinding slide 0.01 – 0.06 mm/table stroke Motorized Quick Feed of cross travel/hydraulic lift-off 200/80 mm/Min. 12 Workpiece speeds adjustable in 3 steps 9 – 156 rpm Grinding wheel speed approximately 815 rpmTable speeds, infinitely variable / quick feed 0,05 – 5,000 mm/min Taper grinding / taper angle / table swivel 3 – 6 ° min Grinding spindle drive / workhead drive 10 / 3 kW Total electrical load 25 kW – 380 V – 50 Hz Weight, approx. 14,5 to Dimensions: length x width x height, approx. 10 x 3,10 x 2,20 m
 
  65
IDMA32081
MakeWaldrich Siegen
ModelWSF6
YOM1978
ConditionGood Condition
PhotoSee Photo
Max. distance between center: 4200 mm,
Max. diameter work: 750 mm,
Power alimentation: 380 V-50 Hz,
Diameter wheels grinder: 750 x 65 mm,
Max. weight capacity: 6000 Kg,
Power capacity motors wheel: 22 Kw,
Power capacity motors head: 6 Kw,
 
  66
IDMA32027
MakeStuder
ModelS30
YOM
ConditionGood Condition
PhotoSee Photo
Centers height - 175 mm
Distance between centers - 1000 mm
Grinding wheel diameter – 400mm
Grinding wheel dimensions: 400x80x127 mm
Machine’s weight: 3400 kg
 
  67
IDMA31690
MakeOverbeck
Model400RU
YOM1978
ConditionGood Condition
PhotoSee Photo
Centers height: 100 mm,
Between centers: 430 mm,
Maxi weight of the part: 12 kg,
Grinding wheel diameter: 300 mm,
Grinding wheel width: 60 mm,
Grinding wheel bore: 127 mm,
Wheelhead spindle speed: 2250/2750 rpm,
Tailstock type: MK2
Speed of table traverse:0-6 m/min,
Power: 4.5 kW,
Sizes: 2.5 x 2.9 mm,
Weight: 1700 kg
 
  68
IDMA31666
MakeTos Hostivar
ModelBHU32A/1500
YOM
ConditionGood Condition
PhotoSee Photo
Grinding diameter: 320 mm,
Grinding length: 1500 mm
 
  69
IDMA31610
MakeRussian
Model3M197
YOM1986
ConditionGood Condition
PhotoSee Photo
Main technical data:
Max work-piece
Diameter:800 mm,
Length:6000 mm,
Weight: 10 ton,
Grinding wheel dimensions: 750 x 100 mm,
Min grinding diameter: 80 mm,
Intermittent in feed per radius: 0.0025-0.03 mm,
Surface speed of grinding wheel: 50 m/s,
Main motor: 30 kW,
Total power requirement: 47,5 kW,
Dimension:
length: 17460 mm,
Width: 4180 mm,
height: 2450 mm,
machine weight: 43.200 kg
 
  70
IDMA31600
MakeKellenberger
ModelRS175x1500
YOM
ConditionGood Condition
PhotoSee Photo
Grinding area - 175 x 1500 mm
Grinding width - 250 mm
Grinding wheel diameter - 450 mm
Center height - 125 mm
Quantity: 2 nos
 
  71
IDMA31384
Make
Model3M193
YOM1984
ConditionGood Condition
PhotoSee Photo
max length - 2800 mm
max diameter - 560 mm
weight of work piece - 4000 kg
 
  72
IDMA31153
Make
ModelSWAAGL125
YOM1984
ConditionGood Condition
PhotoSee Photo
Grinding diameter in automatic cycle - ..185mm
Grinding diameter in manual cycle - ..160mm
Rapid travel of spindle stock - 10mm
Max travel of spindle stock with the help of handwheel - 125mm
Wheel's dimensions - 630x50x350mm
Weight - 4600kg
 
  73
IDMI6938
MakeZocca,Italy
ModelRU 600/3 IDRO MATIC
YOM
ConditionWorking
PhotoSee Photo
Machine is equipped with MARPOSS
Centre Height : 180 mm
Length of Job : 600 mm
Wheel size- 50 X 400 MM
Type : Hydraulic
Complete of all accessories.
This machine is in perfect working condition, as new machine, rarely used.
 
  74
IDMA30372
MakeKellenberger
Model600RJ
YOM1980
ConditionGood Condition
PhotoSee Photo
Working Range External Grinding
grinding diameter (max):250 mm
grinding length: 600 mm

Work piece Spindle stock
spindle revolutions (max):2850/min

Spindle stock Grinding Spindle
spindle revolutions (max):750/min

Grinding Tool
type of grinding tool wheel
 
  75
IDMA30085
MakeStuder
ModelS30
YOM
ConditionGood Condition
PhotoSee Photo
Centers height: 175 mm,
Distance between centers: 1000 mm,
Grinding wheel diameter: 400 mm,
Grinding wheel dimensions: 400 x 80 x 127 mm,
Machine's weight: 3400 kg.
 
  76
IDMA30059
MakeStanko-Russia
Model
YOM80s
ConditionGood Condition
PhotoSee Photo
Model: 3M195
Max. work piece diameter: 800 mm
Max. work piece length: 2800 mm
Main motor: 48 kW
Dimension: 10790(L)x 4180 (W) x 2455 (H) mm
Weight of the machine with electric equipment: 35.5 t
Good condition

Model: 3M193
New: 80’s
Max. work piece diameter: 560 mm
Max. work piece length: 2800 mm
Main motor: 43 kW
Dimension: 10540(L)x 4020 (W) x 2455 (H) mm
Weight of the machine with electric equipment: 28.27 t
Quantity: 2 nos
 
  77
IDMA29933
MakeRussian
Model3M193
YOM
ConditionGood Condition
PhotoSee Photo
Greatest diameter : 560 mm,
The greatest length of an installed piece : 2800 mm.
 
  78
IDMI6589
MakeStuder
ModelS30
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Distance between centres: 650 or 1000 mm,
Centre height: 125 / 175 / 225 mm,
Swivelling turret wheel head (for external and internal grinding)
Automatic grinding cycles for plunge and traverse grinding
Swivelling machine table
Partial enclosure
Granitan machine bed
Large range of accessories
 
  79
IDMA29607
MakeJones & Shipman
Model1055
YOM1972
Conditionworking condition ,under power
PhotoSee Photo
Work piece's length: 1520 mm,
Work piece's diameter: 203 mm,
Dimensions: 1700 x 4300 mm,
Weight: 5100 kg,
The machine is equipped with
Additional face plate
5 rests,
extra hydraulic station,
documentation
 
  80
IDMA29600
MakeWMW,Germany
ModelSWA AGL125
YOM
ConditionGood Condition
PhotoSee Photo
Grinding diameter: 28... 125 mm (automatically),
Grinding diameter: 160 mm (manually),
Wheel's dimensions: 630 x 305 mm,
Dimensions: 3220 x 2920 x 1970 mm,
Weight: 4500 kg.
 
  81
IDMI6540
MakeTos Czech
ModelBUA50-1000
YOM
ConditionGood Condition
PhotoSee Photo
Maximum grinding diameter : 500 mm,
Admit between centers : 1000 mm.
Wheel dia : 750 mm.
 
  82
IDMI6533
MakeCimat
ModelRU400
YOM
ConditionGood Condition
PhotoSee Photo
Admit between centers : 400 mm,
Center Height : 100 mm.
 
  83
IDMI6516
MakeChurchill
ModelCW3000
YOM
ConditionGood Condition
PhotoSee Photo
Between center : 3000 mm
Swing : 400 mm.
 
  84
IDMI6515
MakeJohansson (Sweden)
Model21UA
YOM1974
Conditionworking condition ,under power
PhotoSee Photo
Length: 3000 mm,
Centre height: 225 mm
 
  85
IDMI6514
MakeMSO,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Dia : 570 mm,
Length : 2500 mm.
 
  86
IDMI6513
MakeHaubold Chemnitz; German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Admit Between Centre : 3500 mm,
Centre Height : 180 mm,
Swing : 360 mm,
Extended Block Available Centre Height : 400 mm.
 
  87
IDMI6511
MakeChurchill,UK
Model
YOM
ConditionGood Condition
PhotoSee Photo
Swing Cylindrical Grinder : 3000 mm long X 500 mm,
Machine is highly accurate still and is used for precision grinding of hydraulic cylinder rods.
Machine is fully complete with all accessories including steady rests etc.
 
  88
IDMI6510
MakeFriedrich Schmaltz,German
Model
YOM1962
ConditionGood Condition
PhotoSee Photo
Maximum grinding surface : 3000 X 650 mm,
Travels X, Y : 3000 (X), 650 (Y) mm,
Hydraulic operation,
Servo handbook and electrical diagrams included,
Dimensions : 7400 mm x 2800 mm x 1700 mm + tank 1200 mm x 850 mm x 1100 mm,
Approximate weight : 18.000 kg.
Motors : 220V (transformer 380V).
Complete with accessories box (grinding wheels).
 
  89
IDMI6506
MakeTos Czech
Model
YOM
ConditionGood Condition
PhotoSee Photo
a
 
  90
IDMA29544
MakeRussian
Model3M195
YOM1992
ConditionGood Condition
PhotoSee Photo
Grinding diameter: 800 mm,
Grinding length: 4000 mm,
Work pieces weight: 10000 kg,
Total power: 60 kW,
Grinding wheel: 750 x 100 mm,
Weight: 33900 kg.
 
  91
IDMI6458
MakeCC
Model
YOM
ConditionGood Condition
PhotoSee Photo
Centre height: 125 mm x length 500 mm
With ID/OD grinding machine
 
  92
IDMA29320
MakeOkuma,Japan
ModelH45A
YOM1981
ConditionGood Condition
PhotoSee Photo  |  See Video
Working Capacity : 700 mm X 1800 mm.
 
  93
IDMA29156
MakeStuder
ModelS50-12
YOM1987
ConditionGood Condition
PhotoSee Photo
Center height : 160 mm,
Center distance : 1600 mm,
Grinding length : 1600 mm,
Grinding wheel’s diameter : 500 mm.
 
  94
IDMI6412
MakeHokusin
Model
YOM
ConditionGood Condition
PhotoSee Photo
Between center capacity dia: 330 x 900 mm,
Center height: 165 mm,
Cross travel: 400,
Adaption (work head): MT5,
Wheel head motor: 5 HP/1400 RPM,
With coolant arrangement.
 
  95
IDMI6389
MakeGER
ModelRHL450
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 x 450 mm,
Between centre: 400,
Wheel head motor: 5 HP/1400 RPM,
With coolant arrangement.
 
  96
IDMA27975
MakeRussian
Model3M197
YOM
ConditionVery good condition
PhotoSee Photo
Max. diameter of work piece: 800 mm,
Max. length of work piece: 6000 mm,
Weight of work piece: 10000 kg,
Dimensions: 17400 x 4180 x 2455 mm,
Weight: 40830 kg
 
  97
IDMA27957
MakeLandis
ModelPlainB
YOM1956
ConditionGood Condition
PhotoSee Photo
dia. 24 (610 mm) and length 216" (5486 mm)
Machine with mechanical table feed,
Needs Refurbished and CNC Retro-Fit.
 
  98
IDMI6161
MakeTos Hostivar
ModelBHU32x1500
YOM
ConditionGood Condition
PhotoSee Photo
Working dia: 320 mm,
Grinding length: 1500 mm
 
  99
IDMA27221
MakeNaxos Union,Germany
ModelRT4000
YOM1966/2004 G.Overhauld
ConditionExcellent condition,under power
PhotoSee Photo
Grinding dia : 630 mm,
Center height : 315 mm,
Grinding length : 4000 mm.
 
  100
IDMA27217
MakeNaxos Union,Germany
ModelR500-6000
YOM1960/2000
ConditionVery good condition
PhotoSee Photo
Grinding diameter: 500 mm,
Grinding length : 6000 mm,
Centre height : 250 mm,
Cross travel : 370 mm,
Dimensions of grinding wheel : 750 x 65 x 305 mm,
Grinding wheel speeds : 850 U/min,
Spindle speeds : 12-120 U/min,
Table speeds : 0,1-1,5 m/min,
Work piece weight : 2 t,
Total power requirement : 22 kW,
Weight of the machine ca : 19 t,
Dimensions of the machine ca : 14,2 x 3,2 x 2 m.
 
  101
IDMA27211
MakeDANOBAT
ModelRU4000
YOM1987
ConditionGood Condition
PhotoSee Photo
Centre height : 325 mm,
Centre distance : 4000 mm,
Grinding diameter : 650 mm,
Grinding wheel diameter : 760 mm,
Power : 40 KW,
Accessories:
Lunettes-flansch-wheel balance-Hydrokompenser mod.
HK 5000 - viewer fagor - extra cabinet for inverter
 
  102
IDMA26912
MakeWMW,Germany
ModelSWA-AGL50/4PC
YOM
ConditionGood working condition
PhotoSee Photo
Diameter of pcs (automatic) : 13-63 mm,
Work piece width : 8-38 mm,
Work piece spindle speed : from 160 up 1700 U/min,
Work piece spindle adjustment : 180 mm,
Wheelhead quick adjustment : 5 mm,
Grinding spindle speeds : 1330-1900-2280 rpm,
Peripheral speed : 35/50/60 m/s,
Grinding spindle swiveling : 20˚,
Weight : 4 to.
 
  103
IDMA26911
MakeWMW,Germany
ModelSWA-AGL125/3
YOM
ConditionGood working condition
PhotoSee Photo
Diameter of pcs (automatic) : 28-125 mm,
Diameter of pcs (manually operated) : 160 mm,
Work piece spindle speed : 8 steps, from 90 up 1000 U/min,
Quick adjustment : 10 mm,
Grinding spindle speeds : 1050-1500-1800 rpm,
Peripheral speed : 60m/s,
Weight: 4.6 to.
 
  104
IDMA26910
MakeWMW,Germany
ModelSWA-AGL125/4
YOM
ConditionGood working condition
PhotoSee Photo
Diameter of pcs (automatic) : 28-160 mm,
Diameter of pcs (manually operated) : 180 mm,
Work piece spindle speed : 8 steps,
From 90 up 1000 U/min,
Quick adjustment : 10 mm,
Grinding spindle speeds : 1050-1500-1800 rpm,
Peripheral speed : 35/50/60 m/s,
Grinding spindle swiveling : 20˚,
Weight : 5 to.
 
  105
IDMA26909
MakeWMW,Germany
ModelSWA-AGL125/5PCG10
YOM
ConditionGood working condition
PhotoSee Photo
Diameter of pcs (automatic) : 28-160 mm,
Diameter of pcs (manually operated) : 180 mm,
Work piece spindle speed : 8 steps,
From 90 up 1000 U/min,
Quick adjustment : 10 mm,
Grinding spindle speeds : 1050-1500-1800 rpm,
Peripheral speed : 35/50/60 m/s,
Grinding spindle swiveling : 20˚,
Weight : 5 to.
 
  106
IDMI5780
MakeTos Czech
ModelBHU40A
YOM
ConditionGood Condition
PhotoSee Photo
Centre Height: 200mm
Swing: 400mm
Between Centre: 1000mm
 
  107
IDMI5764
MakeTitan Romania
ModelRU350 x 2500
YOM
ConditionGood Condition
PhotoSee Photo
Diameter : 350 mm.
Center Distance : 2500 mm.
 
  108
IDMI5763
Makejohnson
Model
YOM
ConditionGood Condition
PhotoSee Photo
Admit Between Centre: 1500mm,
Centre Height: 200mm ,
Swing: 400 mm.
 
  109
IDMI5762
MakeHerkules
Model
YOM
ConditionGood Condition
PhotoSee Photo
Job Length : 2000 mm,
Centre Height : 200 mm,
Job Swing : 400 mm.
 
  110
IDMA21640
MakeRussian
Model3A172
YOM
ConditionGood Condition
PhotoSee Photo
Work piece maximum diameter 560 mm
Work piece maximum length 4000 mm
Machine overall dimensions
length 11750 mm
width 3700 mm
height 1850 mm
Machine weight 23.4 tons.
 
  111
IDMA21444
MakeOverbeck
Model400RU
YOM1978
ConditionGood Condition
PhotoSee Photo
grinding diameter 0,5 - 100 mm,
grinding length 400 mm,
centre height 140 mm,
centre distance 430 mm,
grinding wheel size 300 x 60 x 127 mm,
internal grinding diameter 8 - 60 mm,
internal grinding depth 120 mm,
total power requirement 4,5 kW,
weight of the machine ca. 3 t,
dimensions of the machine ca. 2,0 x 1,5 m .
 
  112
IDMA20995
Make
Model3M196
YOM1978
ConditionWorking
PhotoSee Photo
Dia:800mm, length:3600mm
 
  113
IDMA20489
MakeTos Czech
ModelBUA31
YOM
ConditionGood Condition
PhotoSee Photo
max dia 315 mm, max distance between center 1000 mm.
 
  114
IDMA19475
MakeRussian
ModelKHSH5-16
YOM1985
ConditionGood Condition
PhotoSee Photo
Max work piece diameter 900 mm, Max work piece length 16000 mm, Distance between centers’ axes and grinding disk, mm: min - 350; max - 900
Max grinding length in extreme right position of tailstock 12000 mm, Max grinding diameter of cylindrical surfaces with dia 900 mm ,grinding disk 800 mm, Max grinding diameter of conical surfaces with 4° angle (clockwise table rotation) with Ř 900 mm grinding disk 500 mm, Max grinding diameter of conical surfaces with 0°40° angle (counterclockwise table rotation) with dia 500 mm grinding disk, mm: 500
Min grinding diameter dia 600 mm, grinding disk 100; conical surfaces – 200
Centers’ height above table 460 mm, Max table rotation angle: clockwise 2°; counterclockwise 0°20°
Spindle taper 125 mm, Max spindle travel along its axis 5 mm,Max grinding disk diameter 900 mm,Max grinding disk height100 mm,Grinding disk bore diameter 305 mm,Max grinding head travel 550 mm, Max work piece diameter 900 mm, Max work piece length. 16000 mm, Distance between centers’ axes and grinding disk, mm: min - 350; max - 900
Max grinding length in extreme right position of tailstock 12000 mm,
Max grinding diameter of cylindrical surfaces with dia 900 mm grinding disk 800 mm,Max grinding diameter of conical surfaces with 4° angle (clockwise table rotation) with Ř 900 mm grinding disk500 mm,Max grinding diameter of conical surfaces with 0°40° angle (counterclockwise table rotation) with Ř 500 mm grinding disk500 mm, Min grinding diameterdia 600 mm grinding disk - 100; conical surfaces – 200
Centers’ height above table460 mm,Max table rotation angle clockwise 2°; counterclockwise 0°20°
Spindle taper125 mm, Max spindle travel along its axis, mm: 5
Max grinding disk diameter900 mm, Max grinding disk height100 mm,
Grinding disk bore diameter305 mm,Max grinding head travel550 mm,Machine dimensions 20680 x 4500 x 4050 mm,
Machine weight129 tons.
 
  115
IDMA19159
MakeTos Czech
ModelBUA16A
YOM1974
ConditionGood Condition
PhotoSee Photo
grinding dia 160 mm, grinding length 250 mm, machine dimensions 1500 x 1100 x 1740 mm, machine weight 1400 kg, Accesories : manual, grinding stones, tailstock, balance accesories.
 
  116
IDMA18637
MakeRomanian
ModelRU350x1000
YOM1984
ConditionGood Condition
PhotoSee Photo
Max. grinding diameter-350 mm, Max. grinding length-1000 mm, Max. weight of the workpiece-500 kg, Workpiece's speed-12,5 0 250 rpm, External diameter of the grinding wheel-460 - 525 mm, Width of the grinding wheel-100 mm, Speed of the grinding wheel-1200 rpm, Table's speed-0,05 - 6 m/min, Rapid stroke of the grinding wheel slide-65 mm, Max. internal griding length-420 mm, Installed power-11,35 kW
Net weight of the machine-6 Ton, Overall dimensions (L x W x H): 3164 x 2055 x 1990 mm.
 
  117
IDMA18576
MakeJarbe
ModelRUA1000
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 x Dia. 290 mm,
Internal Head,
Wheel : 500 x 150 x127 mm,
Electro magnetic chuck.
 
  118
IDMA18575
MakeBikain
ModelRCL1000
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 x Dia. 260 mm,
Internal Head,
Wheel:600 x 50 x 127 mm,
Electro magnetic chuck.
 
  119
IDMA18574
MakeGER
ModelRHL450
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 450 x Dia. 225 mm,
Internal Head,
Wheel : 350 x 50 x 127 mm,
Electro magnetic chuck.
 
  120
IDMA18538
MakeJones & Shipman
Model1310
YOM
ConditionGood Condition
PhotoSee Photo
200mm swing x 500mm between centres.
 
  121
IDMA18447
MakeShigiya
ModelG30
YOM1985
ConditionGood Condition
PhotoSee Photo
 
  122
IDMA18091
Make
Model
YOM1965
ConditionGood Condition
PhotoSee Photo
Max dia 400 mm, Max length 2800mm.
 
  123
IDMA18083
MakeStuder
ModelS40-5
YOM1989
ConditionGood Condition
PhotoSee Photo
grinding diameter 250 mm
grinding length 200 mm
grinding wheel size 750 x 50 bis 100 x 304,8 mm
feed speeds 0,012 - 6000 mm/min
rapid traverse 6 m/min
weight approx. 4200 kg
Dimension of the machine l/w/h 4,3 x 3,7 x 2,2
With Siemens Sinumerik CNC 3G, NC-Z-axis 120 mm stroke, part headstock swivel, Novomatic ERA 4520b, Mist Collectors, paper band filter with 375 litres tanks, RS 232 interface. Software before re-opening will be deleted
top