Category : Grinding Machines

Sub-Category : Grinder Cylindrical Universal

Total Machines Found : 5

Select | Machine Details
 
  1
IDMI7747
MakeTos Czech
ModelBUA63-2000
YOM
ConditionGood Condition
PhotoSee Photo
Max. Swing: 630mm
Max. Admit between Centres: 2,000mm
Max. Admit between Centres: 2,670mm (with Extension Tailstock)
Operating Voltage: 415V
Power: 37KW
Grinding Wheel: Dia 750mm x 80/100mm thick x 305 bore - A80 L3 V10 grade
Min. Dia of Grinding wheel that can be used: 570mm
Steady Rest (closed-end) for Dia 300mm – 1 no.
Steady Rest (closed-end) for Dia 200mm – 1 no.
Follow Rest (open-end) for Dia 250mm – 1 no.
Taper in Tailstock and Work-head: MT-6
Independent 4-jaw Chuck: Dia 315mm
Work-head Swivel: 900
Wheel-head Swivel: 300
Table Swivel: 6030I
Wheel-head Motor: 20HP, 1,440rpm
Work-head Motor: 2.0HP, 900/700/1,425rpm
Powerpack Oil Pump: 2.2KW
Lubrication Pump: 0.12KW
Coolant Motor: 0.5HP
Rapid Traverse Motor: 1.0HP

Accessories:
Internal Grinding Attachment
Dressing attachment for Internal Dia.
Side face dressing attachment
Wheel balancing Mandrel
Wheel balancing Stand
Wheel mounting fixture
Wheel flange – 2 nos.
Pipe Centres – 120 -210 dia
Dead center MT6 - 2 nos
 
  2
IDMA34613
MakeTos Czech
ModelBHU40/2000
YOM
ConditionGood Condition
PhotoSee Photo
Swinging Diameter - Maximum............15.74"
Distance Between Centers - Maximum............78.74"
Grinding Wheel............19.68" Dia. x 3.14" W. x 7.99" Bore
Diameter of Worn Grinding Wheel............13.77"
Swinging Diameter Ground w/Grinding Wheel Worn to13.77" - Minimum............1.96"
Face Width of Grinding Wheel - Maximum............7.87"
Width of Built-Up Grinding Wheel - Maximum............8.85"
Total of Widths of Individual Wheels Building Up Compound Grinding Wheel - Maximum............5.90"
Diameter Swung in Open Rest - Maximum............4.33"
Taper of Work Spindle............No. 5 Morse
Taper in Bore of Tailstock Barrel............No. 5 Morse
Diameter of Chuck............7.87"
Diameter Swung in Closed Rest - Maximum............4.33"
Bore in Sleeve Receiving Internal Grinding Spindle............3.93"
Swivel of Workhead............90 Degrees
Swivel of Wheelhead............+/- 45 Degrees
Swivel of Table to Either Side............8, 7, 6, 5, 4 Degrees
Speed to Wheel Spindle............1,230 - 1,470 RPM
Speed to Work Spindle:
- I Range (8)............12, 20, 32, 50, 80, 125, 200, 315 RPM
- II Range (8)............16, 25, 40, 63, 100, 160, 250, 400 RPM
Length of Longitudinal Travel of Table - Minimum............0.039"
Length of Longitudinal Travel of Table - Maximum............90.15"
Length of Cross Travel of Wheelhead (Infeed Movement)............16.33"
Length of Hydraulically-Operated Quick Adjustment of Wheelhead............2.36"
Rate of Table Travel Steplessly Variable Within............1.96 - 196.85 In/Min.
Length of Cross Travel of Wheelhead Operated by Automatic Infeed (Infeed Movement)............0.059 In/Dia.
Length of Automatic Infeed of Wheelhead in Table Reversals............0.00019 - 0.0019 In/Dia.
Rate of Automatic Infeed of Wheelhead for Plunge Grinding - Work Diameter............0.0039 - 0.19 In/Min
Wheelhead Motor............10.2 (20.4) Hp
Weight of Work Which May be Loaded Between Centers - Maximum............551 Lbs.
- In Chuck with Overhang............66 Lbs.
Catalog Weight (Including Equipment)............14,410 Lbs.
EQUIPPED WITH:
Electrical Upgrade in 2016 w/Yaskawa Drives
Dynamic Balancing Systems (SBS Wheel Balancer) w/SB-5500 Controller
One-Axis Fagor DRO
Automatic Infeed (L-R-Both) w/Hi-Low Infeed Rate
Table Dwell & Tarry - Left-Right-Both
(2) Steady Rests
Table Mount Single Point Wheel Dresser
Wheel & Work Head Tachometer Read-Out
Barnes MPE-15 Paper Coolant Filtration System
 
  3
IDMA34603
MakeKent,Taiwan
ModelKGC-600H
YOMNew 1981
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
TABLE MOUNTED GRINDING WHEEL DRESSER
MITUTOYA GAUGING
ONE SHOT LUBRICATION SYSTEM
HYDRAULIC UNIT (STAND ALONE)
COOLANT (TANK & PUMP)

CATALOG SPECIFICATIONS:
SWING OVER TABLE, MAXIMUM 10.5"
DISTANCE BETWEEN CENTERS, NOMINAL 24"
GRINDING WHEEL DIAMETER, STANDARD 12"
GRINDING WHEEL WIDTH, STANDARD 1.5"
GRINDING WHEEL HOLE DIAMETER 5"
GRINDING WHEEL MOTOR, HORSEPOWER 3 HP
WORKHEAD MOTOR, HORSEPOWER 1/4 HP
WEIGHT, APPROXIMATELY 4300 LBS
 
  4
IDMA34454
MakeCincinnati,USA
ModelR328 X 2000
YOM1974/fully Refurbesh 2003
ConditionGood Condition
PhotoSee Photo
MAXIMUM GRINDING LENGTH: 2050MM
GRINDING WHEEL SIZE: 600MM X 80MM X 203MM
CENTER HEIGHT: 190MM
TABLE ROTATION: 7°
WORKPIECE WEIGHT BETWEEN CENTERS: 400KG
SPINDLE SPEED: 1-168 U/MIN
FEED (STEPLESS): 0.1-4 MM/MIN
GRINDING WHEEL DRIVE: 11KW
GRINDING WHEEL SPEED RANGE: 30 M/S
GRINDING DIAMETER: 350MM
TOTAL POWER REQUIREMENT: 19KW
TOTAL MACHINE DIMENSIONS: 6.9 X 2.8 X 2.2
MACHINE WEIGHT: 9.6 TON
 
  5
IDMA34137
MakeStuder
ModelS50-12
YOM1990
ConditionGood Condition
PhotoSee Photo
Center height : 160 mm,
Center distance : 1600 mm,
Grinding length : 1600 mm,
Grinding wheel’s diameter : 500 mm.
top