Category : Machining Center

Sub-Category : Machining Center Horizontal

Total Machines Found : 294

Select | Machine Details
 
  1
IDMA35048
MakeMakino,Japan
ModelA99
YOM2002
ConditionGood Condition
PhotoSee Photo
2 APC-800X800 INDEX 0.1
132-ATC-HSK100 coolant thought spindle
Fanuc Professional 3 CNC Control
 
  2
IDMA35040
MakeNiigata
ModelHN63D
YOM2010
ConditionGood Condition
PhotoSee Photo
X-Axis Travel: 1000.76mm
Y-Axis Travel: 850.90mm
Z-Axis Travel: 749.30mm
B-Axis Indexing: .001°
Pallet/Table Size: 629.92mm x 629.92mm (2)
Table Capacity: 1201.78 kg
Spindle Speed: 20 - 6000 RPM
Spindle Taper: 50 Taper
Spindle Motor: 18.64 kw
EQUIPPED WITH:
Fanuc 30i-MA CNC Control
90-Position Automatic Tool Changer
Chip Blaster 70.30 kgs./sq.cm. Through Spindle Coolant Pump
Tool Length Measurement Probe
Chip Conveyor
 
  3
IDMA35032
MakeOKK
ModelHM630
YOM2010
ConditionGood Condition
PhotoSee Photo
Control :- Fanuc 31IS-A5
4 Axis machine
Twin Pallet.
 
  4
IDMA35031
MakeOKK
ModelHM630
YOM2011
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 31i- A5,
4 Axis machine,
Twin Pallet.
 
  5
IDMA34982
MakeMAZAK
ModelHTC400
YOM
ConditionGood Condition
PhotoSee Photo
PALLET SIZE (2) 15.70" X 15.70"
X-AXIS TRAVEL 22"
Y-AXIS TRAVEL 20"
Z-AXIS TRAVEL 20"
TABLE INDEXING 1 DEGREE
SPINDLE MOTOR 15 HP
SPINDLE SPEED 10,000 RPM
SPINDLE TAPER CAT # 40
ATC 30 ATC
MACHINE EQUIPPED WITH
CHIP CONVEYOR
 
  6
IDMA34980
MakeMAZAK
ModelHTC400
YOM1998
ConditionGood Condition
PhotoSee Photo
MACHINE SPECIFICATION
PALLET SIZE 15.75" X 15.75"
PALLET INDEX 1 DEGREE
PALLET LOAD CAPACITY 660 LBS
SPINDLE TAPER CAT 40
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 15 HP AC
TOOL CHANGER TYPE 30 ATC
Z-AXIS TRAVEL 20.08"
Y-AXIS TRAVEL 20.08"
X-AXIS TRAVEL 22.05"
RAPID ON (X,Y,Z) IPM 1181 IPM
MACHINE EQUIPPED WITH
CHIP CONVEYOR
 
  7
IDMA34979
MakeKiwa,Japan
ModelKNH400
YOM2004
ConditionGood Condition
PhotoSee Photo
CONTROL Fanuc 18iMB
PALLET SIZE 15.8" X 15.8"
TOOL CHANGE TIME 1.2 SECONDS
RAPID TRAVERSE 2,362 IPM
B-AXIS (.001°INCREMENT) FULL 4TH
Z-AXIS TRAVEL 26.18"
Y-AXIS TRAVEL 24.02"
X-AXIS TRAVEL 23.62"
NUMBER OF TOOLS 64
MAX WEIGHT PER PALLET 881 LBS
NUMBER OF PALLETS 2
SPINDLE TAPER 40 TAPER
MACHINE EQUIPPED WITH
HINGE BELT CHIP CONVEYOR WEEKLY TIMER SPINDLE CHILLER 12000 RPM (35 HP) BIG PLUS THROUGH SPINDLE COOLANT STANDARD WEIGHT (2 PALLET) 23100 POUNDS CHIP CONVEYOR STANDARD (LIFT TYPE) 10420 CUT TIME HR'S
 
  8
IDMA34972
MakeIkegai,Japan
ModelAH-6
YOM
ConditionGood Condition
PhotoSee Photo
Controller : FANUC 15-M
Travel : X/Y/Z 850mm/800mm/700mm
Table : 630 x 630 mm
B axis : 0.001°
Table Load:1000kg
Spindle : 4500rpm ISO50
ATC : 60T
2 APC
 
  9
IDMA34962
MakeMAZAK
ModelFH880
YOM1998
ConditionGood Condition
PhotoSee Photo
X-axis Travel :- 51.5"
Y-axis Travel :- 43.3"
Z-axis Travel :- 39.3"
Pallet Size :- 31.5" x 31.5"
B-Axis Indexing : 1
Spindle Taper : 50
Spindle Speed : 7,000 RPM
Spindle Motor : 40 HP
Equipped With
Mazak Mazateol M Plus CNC Controls
6-Station Automatic Pallet Changer
120-Station Automatic tool Changer
Chip Conveyor
High Pressure Coolant
 
  10
IDMA34958
MakeDahlih,Taiwan
ModelMCH800
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Pallet dimensions 800 c 800 mm
Max. table load 2000 kg
X/Y/Z - 1350/1000/1000 mm
Distance from spindle center to table surface 50-1050 mm
Spindle taper BT 50
Spindle speeds 6000 rpm
No. of stations in tool changer 60
Control:
Fanuc 21i-MB
 
  11
IDMA34957
MakeMazak,Japan
ModelFH6800
YOM2005
ConditionGood Condition
PhotoSee Photo
Pallet Change Time : 10 Seconds
Pallet Load Capacity : 3307 lbs.
Pallet Size : 24.8" (2)
X-Axis : 41.34"
Y-Axis : 35.43"
Z-Axis : 38.58"
Pallet Index : 1 Degree
Spindle Speed : 10,000 RPM
Spindle Taper : #50
Spindle Motor : 50 / 40 HP
Spindle Center to Table Top : 3.93" - 39.37"
Spindle Nose to Table Center : 3.93" - 42.52"
Tools : 100
Rapid Traverse Rates (X, Y & Z) :2362 IPM
Tool Change Time (T - T / C - C) : 2.2 / 4.2 Seconds
Max Tool Diameter : 4.92" / 10.24"
Max Tool Length : 24.8"
Max Tool Weight : 44 lbs.
Max Workpiece Dia / Height : 41.34" / 39.37"
Machine Dimensions (L x W x H) : 287.2" x 131.9" x 134.7"
Machine Weight : 39,000
Spindle Torque : 433 ft. lbs.

Features:
• MAZATROL FUSION 640M CNC CONTROL
• 15" Color TFT
• PC / MCIA Interface
• USB Port
• Fourth Axis Rotary Table
• 100 Tool Magazine
• Renishaw Laser Auto Tool Length Measurement (NC4)
• Renishaw Touch Probe
• Auto Tool Length Measurement
• Tool Breakage Detection & Recovery
• RFID Tool ID System
• Through Spindle Coolant (300 PSI)
• Mayfran Chip Conveyor
• Workpiece Air Blast
• Auto Pecking Cycle with Load Detection
• Rigid Tapping
• Helical Interpolation
• Manufactured in December 2005
 
  12
IDMA34955
MakeMazak,Japan
ModelFH6800
YOMNew 2004
ConditionGood Condition
PhotoSee Photo  |  See Video
4 axes Mazatrol Fusion 640 M,
ATC 80.
Cooling 70 Bar and air blow through spindle.
With Renishaw and Maynard Chip Conveyor.
4 extra pallets.
2 Pallets 630 x 630 mm, 0,001° x 360.000° positions.
X= 1.050 mm.
Y= 900 mm.
Z= 825 mm.
Workpiece weight 1.500 kg.
Distance table surface - spindle nose 100 – 900 mm.
Distance table middle - spindle nose 150 - 1.030 mm.
Spindle speed 1-10.000 rpm.
Spindle motor power 37 kW.
Spindle taper SK 50, ( ISO 50).
Feed ( X/Y/Z) 40 m/min.
 
  13
IDMA34951
MakeHeller
ModelMC26
YOM2000
ConditionGood Condition
PhotoSee Photo  |  See Video
Siemens 840D cn type
Race 800x800x800
Table 500x630
Maximum part dimension 900x1000mm
Permissible weight center pallet 800kg
360 x 1 degree indexing
Maximum spindle speed 204Nm
Spindle power 64kW
Tool magazine 60
Rapid feed 60,000 mm / min
Characteristics:
- High dynamic up to 1.2g and 90m / min.
- Working capacity from 630 to 800.
- Compact design, floor area <22m / 2.
- Wide choice of equipment: tool magazine, pallets, watering ...
Machine dimension 6485x3050x3315 (mm)
Machine weight 10,000 kg
With 60 cones supplied with the machine
 
  14
IDMA34947
MakeOkuma,Japan
ModelM630VH
YOM2004
ConditionGood Condition
PhotoSee Photo
CNC Control: FANUC 15iM
Simultaneously controllable axes X, Y, Z, B, A

Axes
X Axis mm: 1.020
Y Axis mm: 1.020
Z Axis mm: 1.020
A Axis degree: 150 (0.001Ί)
B axis degree: 0.001Ί

Pallet
Number of pallets: 2
Dimensions mm: 630 x 630
Max. work piece weight kg: 1000
APC time sec: 20

Spindle
Spindle speed rpm: 100 10.000
Spindle drive power kW: 18,5 / 22

Tool system
Tool type: MAS BT50
Positions in magazine St.: 80
Max. tool diameter (with adjacent tools) mm: ψ125
Max. tool diameter (with adjacent tools) mm: ψ200
Max. tool length mm: 400
Max. tool weight kg: 20
Tool change time (tool to tool) sec.: 4
Tool change time (CUT to CUT) sec.: 8


Electronic handwheel
Chip conveyor
Internal cooling
RENISHAW probe pre installation

Power requirement kVA: 58

Basic machine dimensions / weight
Length mm: 4.850
Width mm: 6.350
Height mm: 3.700
Weight kg: 22.000
 
  15
IDMI7841
MakeMazak,Japan
ModelPower center H15
YOM2018
ConditionGood working condition
PhotoSee Photo  |  See Video
2 pallets
X Axis : 880.0 mm
Y Axis : 780.0 mm
Z Axis: 650.0 mm
Control : Fanuc Oi-MF
Pallet Size: 630mm X 630mm
Tools Holder : 40 Nos
Spindle Taper : BT 50
Spindle Rotation : 4000 rpm
Weight : 12000 Kgs
Repitability XYZ Axis-0.003
Spindle Runout-0.002
 
  16
IDMA34915
MakeHuller Hille
ModelNBH170
YOM2000
ConditionGood working condition
PhotoSee Photo  |  See Video
Control: Siemens Sinumerik 840C
Working area
X-axis mm 800
Y-axis mm 800
Z-axis mm 800
Workpiece-swivel range in working area diameter mm 900
Path measuring system - absolute scales - type
directly with incremental scale
Position uncertainty A according to ISO 2302 mm 0.007
Round table/pallet
Clamping area pallet DIN 55201 , version 2, form A, mm x mm 500 x 630
Job load each pallet about kg 800
Rotary table division degree 360 x 1°
Dividing accuracy seconds +/- 3”
Pallet changer
The nbh 170 has been equipped with a quick 180° swivel changer.
Pallet change time 10 sec., independent loading and unloading and set-up of pallet.
Working spindle
Diameter in front bearing mm 100
Drive power 100% ED / 60% ED kW 37 / 46
Revolution area 1/min 25 - 6,000 or (25 - 10,000) or (25 - 12,000)
Torque 100% ED / 60% ED max. Nm 900 / 1130
Standard tool taper according to DIN 69871 SK 50
Feed / Feed force / Rapid movement
Feeding area X / Y / Z-axes mm/min 1 - 36000
Feeding force X / Y / Z-axes, 25% ED about N 25000
Rapid movement X / Y / Z—axes m/min 36
Rapid movement B-axis NC 1/min 30
Acceleration about m/s2 4
Tool magazine with 150 tool pockets
Tool loading and unloading place nos. 1
Tool cassette max. nos. 5
Tool positions max. nos. 2 x 50 or (3 x 50 or 4 x 50 or 5 x 50)
Tool diameter / max. tool diameter mm 125 / 325
Tool length max. mm 650
Tool weight max. kg 40
Magazine cassette additional load max. kg 650
Move speed of handling device m/min 160
Tool change time (tools up to 25 kg) about sec. 2.5 - 4.5
Chip-to-chip-time/ VDI 2852 (tool up to 25 kg) about sec 7 - 8
Tool monitoring / non operational time / administration of non operational time and tool life / feed force (Z-
axis) and torque monitoring
During machining tool breakage monitoring in tool magazine room
Incl. 30 SK50 tool tapers
Cooling unit
About L. 1250
Output of coolant pump at 10 bar l/min 30
Pump output of rinsing unit at 1.0 bar I/min 60
Place requirement of basic machine L x W x H about m 8.0 x 3.5 x 3.5
Weight about kg 16,000
Measuring probe infra-red Renishaw
Tool tapers 40
 
  17
IDMA34914
MakeDMG
ModelDMC80H
YOM2006
ConditionGood working condition
PhotoSee Photo  |  See Video
Control: Siemens 840D powerline shopmill
SlimLinePanel with 15"-TFT-Screen
Wall tool magazine Omron
Working area
X-axis mm 800
Y-axis mm 800
Z-axis mm 800
max. workpiece height mm 1350
max. workpiece diameter mm 900
max. feed speed X / Y / Z mm/min 60,000
max. rapid movement X / Y / Z m/min 60
Machine weight kg 15,000
Tool changer
Tool taper HSH 100
Tool magazine / Changer Type horizontal
Nos. magazine pockets 300
Chip-to-chip time sec. 5
Incl. 30 tool tapers
Main drive motor spindle
Kit motor with gear (HSK100)
Power (40 / 100% ED) kW 37 / 27
Max. torque (40 / 100% ED) Nm 1075 / 703
Max. spindle revolution min1 8000
Power (40/100% ED) kW 52/42
Max. torque (40 /100% ED) Nm 392 / 300
Tables
NC-controlled round table with pallet carrier and two pallets (B-axis)
Dimensions pallet mm 630 x 630
Max. job load kg 1200
Rapid movement min1 30
Horizontal machining centre NC-round table
Automation / measurement / monitoring
Measuring probe infra-red Renishaw
Tool measurement in working room Blum-Laser
Tool breakage monitoring
Signal lamp 4-colour
Tool taper 40 pcs
Machine is by its build with flat tracks and its powerful drives capable to execute rough machining and fine
machining up to a precision of IT6.
 
  18
IDMA34891
MakeTongtai
ModelHG-800
YOM2014
ConditionGood Condition
PhotoSee Photo
Controller Fanuc 18i MB
X/Y/Z Axis Travel 1,120 / 950 / 850 mm
Pallet Size 800 x 800 mm
Number of Pallet 2
Spindle Speed 3,600 RPM
ATC 60 Tools
Spindle Taper BT50
 
  19
IDMA34868
MakeMakino
ModelA51
YOM2005
ConditionGood Condition
PhotoSee Photo
Control :
Makino Professional 3
Specifications
X-Axis Travel :22"
Rapid Traverse X/Y/Z :1969 IPM
Number of Axes : 4
Max table Load : 881 LBS
Pallet size 15.7" x 15.7"
Spindle taper : CAT-40
ATC : 60
Spindle Speed : 12000 RPM
Power : 33 HP
Z-Axis Travel : 19.7"
Y-AXis Travel : 22"
Options / Equipped with.
Chip Conveyor
Chiller
2 Pallets
Full 4th Axis
60 Station ATC
 
  20
IDMI7821
MakeOKK,Japan
ModelPCH600
YOM
ConditionGood Condition
PhotoSee Photo
FANUC OM
Speed spindle 4.500Tr-min
2 pallet 630mm x 630mm
BT50 cones
ATC 40
Travle X 800mm Y 800mm Z 700mm
Axis B360 degrees
 
  21
IDMA34864
MakeOkuma,Japan
ModelMB-4000H
YOM2011
ConditionGood Condition
PhotoSee Photo
Quantity 2 machine's.
Travels : X- 22.05" : Y-22.05" ; Z-24.61"
pallet size : 15.75" x 15.75"
Pallet Index: 0.001° Increments
Spindle speed : up to 15000 RPM
Spindle motor : 35/25 HP
spindle taper : 40
Each equipped with
Okuma OSP-P200MA CNC Control
110-position ATCs
MP systems HP coolant system
chip conveyor
 
  22
IDMA34858
MakeMori Seiki
ModelSH50
YOM1996/2000
ConditionGood Condition
PhotoSee Photo
Pallet size: 19.7" x 19.7"
Axis travel:
X axis; 24.8"
Y axis: 23.6"
Z axis: 25.6"
B axis: 360 deg,
Max. workpiece swings dia: 28.7
Table surface to spindle center: 2.0"- 25.6
Table center to spindle: 5.9"-31.5"
max. workpiece height : 26.8"
max. table load : 2200 Lbs
Table Indexing : 1 deg
B-axis Time - 2.0 sec
Rapid Traverse rate X,Y,Z Axes : 1260 IPM
Spindle Speed Range : 12000 RPM
Spindle Taper CAT#40
Spindle Motor 20 HP AC
Auto tool change : 40 ATC
Max Tool Length : 14.2"
Max tool DIA .( ADJ.) : 5.9"
Max tool Weight : 26.4"
Tool change time ( tool to tool ) : 1.3 SEC
Individual Machine Weight : 33000 LBS

EQUIPPED WITH
Fanuc msc 516 CNC Control
12000 RPM Spindle
Floood coolant system
rigid tapping
each machine separate automatic tool changer
Mori seiki horizontal machining center cell model SH503 ( MFG:2000 ) and SH503 ( MFG : 1996 ) cell consist of two machines & 12 pallet automated pool by INE or both with pallet system
 
  23
IDMA34856
MakeDaewoo
ModelACE H100
YOM2006/ Installed in 2007
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 18i-MB
Condition: Excellent
Power On 31,871 hours
Operating Hours 20,821 Hours
Cutting Hours 16,237 Hours

Technical specifications (Subject to verification)
Pallet size / number of pallets: (1,000 x 1,000 mm) 39.4"x39.4" / 2 plts.
Table indexing: 1 Degree Index
Table load capacity: 4,400 lbs.
X-axis travel: 2,000 mm (78.7")
Y-axis travel: 1,250 mm (49.2")
Z-axis travel: 1,250 mm (49.2")
Spindle nose: CAT-50
Spindle speed: 6,000 RPM High Speed Option
Spindle motor: 35 HP
Spindle nose to pallet center: 200-1450 mm (7.9" - 57.1")
Spindle center to pallet surface: 2.9" - 52.2"
Tool magazine capacity: 90 Position ATC
Maximum tool length / weight: 23.6" / 55 lbs.
Rapid traverse rates: 472 IPM
Cutting feed rates: 197 IPM

Equipped with
90 Station Tool Changer 1 Degree Pallet Indexing 2 Pallet Changer System
Through Spindle Coolant
Dual Internal Chip Augers
Chip Conveyor - upright type
Remote Jog Handle
RS 232 Port Interface
Rigid Tapping
Renishaw TS27R tool setting probe/Fanuc
Spindle Air Blast
230 PSI Through spindle coolant system
Standard Coolant Tank with Pump CurrentlyDisassembled
 
  24
IDMA34854
MakeOkuma,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
CNC Control: FANUC 15iM
Simultaneously controllable axes X, Y, Z, B, A
Axes
X-Axis mm: 1.020
Y-Axis mm: 1.020
Z-Axis mm: 1.020
A-Axis degree: 150 (0.001Ί)
B-axis degree: 0.001Ί
Pallets
Number of pallets: 2
Dimensions mm: 630 x 630
Max. work piece weight kg: 1000
APC time sec: 20
Spindle
Spindle speed rpm: 100-10.000
Spindle drive power kW: 18,5 / 22
Tool system
Tool type: MAS-BT50
Positions in magazine St.: 80
Max. tool diameter (with adjacent tools) mm: ψ125
Max. tool diameter (with adjacent tools) mm: ψ200
Max. tool length mm: 400
Max. tool weight kg: 20
Tool change time (tool to tool) sec.: 4
Tool change time (CUT to CUT) sec.: 8
Equipment
Electronic handwheel
Chip conveyor
Internal cooling
RENISHAW probe pre-installation
Power requirement kVA: 58
Basic machine dimensions / weight
Length mm: 4.850
Width mm: 6.350
Height mm: 3.700
Weight kg: 22.000
 
  25
IDMA34853
MakeDoosan
ModelHM800
YOM2012
ConditionExcellent
PhotoSee Photo
Spindle: SK50 Big Plus
with 3 gear steps
X-axis: 1.250 mm
Y-axis: 1.000 mm
Z-axis: 1.000 mm
B-axis: 0.001
rapid traverse X-, Y- and Z-axis: 24 m/min
Rapid traverse B-axis: 10 m/min
Number of available pallets: 6 pieces
Pallet size: 800 x 800 mm
Max. Pallet load: 1600 kg per pallet
Number of tools in matrix tool magazine: 316 stations
Internal coolant supply: 70 bar
Equipped with:
RENISHAW tool breakage control
Glass scales HEIDENHAIN Incremental
Full B axis.
Control: FANUC 31i-MB
Machine is with 6 pallets but can be run with only 2 pallets charger separately!
4 pallets are with Fastems station.
 
  26
IDMA34843
MakeMAZAK
Modele800 V/5
YOM2008
ConditionVery good condition
PhotoSee Photo
Max. Machining Diameter : 28.7"/ 730 MM
Max. Tool Leangth : 15.7" / 400 MM
Max. tool Diameter w/Adjacent Tools : 5.9" / 150 MM ( pockets empty )
Max. tool Diameter : 3.7" / 95 MM
Tool Capacity : 120 Tool ATC
Spindle Taper : 40
Max. Torque : 724 NM
Main Spindle Motor : 18.5 KW
Milling Spindle Speed: 35 – 12,000 RPM
Rapid Traverse Rate (X,Y,Z):50 m/min
X-Axis Travel :24.8"/630 MM
Y-Axis Travel :31.4"/800 MM
Z-Axis Travel :35.4"/900 MM
Max.Workpiece Height :39.3" /1000 MM
Max. Tool Weight :26.5 Lb / 12 KG
2-Pallet Changer. Coolant System w/Filtration and Rear Discharge Chip
Conveyor. Tool Eye ( Automatic ). AFC Function. EIA/ISO Function. Mazak Mazatrol Matrix CNC Control. Voice Advisor E-tower. Additional Workpiece Coordinates System : 300 Pieces. EIA/ISO Boring Cycles. LAN Interface.
USB Interface. Active Vibration Control. Intelligent Thermal Sheild. Intelligent Safety Sheild. Mazak Voice Advisor. Virtual Process. Front Door Interlock. Machine Worklight. Manuals
 
  27
IDMA34813
MakeMazak,Japan
ModelFH600X
YOM1997
ConditionGood Condition
PhotoSee Photo
Pallet Size: 24.8"x24.8"
Table Load Capacity: 3,300 lbs.
Table Indexing: 1 Degree Full 4th
Maximum Part Size (D x H): 41.3" x 39.4"
Max X-Axis Travel: 41.3"
Max Y-Axis Travel: 31.5"
Max Z-Axis Travel: 31.5"
Spindle Motor 30 min. / Continuous 40 HP / 30 HP
Max Spindle Torque: 453 ft./lbs.
Max Spindle Speed: 35 - 15,000 RPM
Spindle Taper: CAT #50
Distance From Spindle Nose to Pallet Center: 7.9" - 39.4"
Tool Magazine Capacity: 80 Tool Positions
Max. Tool Diam./Length/Weight: 10.2"/19.6"/66 lbs.
Rapid Traverse Rates: 1260 IPM
6 Pallet Pallet Changer
Mayfran 22" Chip Conveyor
Coolant through spindle
Royal Filtermist Collector
Machine Footprint: 21' Long X 10'.5"W
Palletech System Footprint: 25'L X 9'W
200 Volts
3Ph
165 Amps
 
  28
IDMA34807
MakeStarrag-Heckert
ModelHEC800-ATHLETIC
YOM2009
ConditionGood Condition
PhotoSee Photo
Travels
X-Axis (headstock cross) 1.450 mm
Y-Axis (headstock vertical) 1.300 mm
Z-Axis (table longitudinal) 1.300 mm
B-Axis (NC – rotary table) 360.000 °
Max. work piece size (Ψ x height) Ψ1.750 x 1.400 mm
NC – rotary table
Pallet size 800 x 1.000 mm Threaded holes DIN55201
Smallest increment 0,001 °
Reduced moment of inertia for payload 250 kgm2
Max. Table load in center 2.000 kg
Feed, Rapid traverse
Feed range in X-Y-Z axis 1 – 60.000 mm/min
Feed force in X-Y-Z axis 100% ED 20 / 18 / 20 kN
Rapid traverse rate in X-Y-Z axis 60 m/min
Rapid traverse B axis (NC - rotary table) 60 m/min
Main spindle
Diameter in front bearing 100 mm
Max. Power, ED 100/60% 37/45 kW
Max. Torque, ED 100/60% 1.230/1.500 Nm
Max. Speed 6.000 min-1 2 gear steps
Tool holder HSK-A 100 DIN 69893
Coolant system
Connection to central coolant supply system
Cooling lubricant unit with backwash filter
Low pressure circuit ca. 2,5 bar ca. 125 l/min
Internal cooling through the spindle centre ca. 80 bar ca. 30 l/min
Tool magazine, tool changer
Tower magazine with 180 storage locations in 3 towers
15 memory locations for extra-long tools between 450 and 800mm realized in the storage.
This reduces the total number of storage units by 15 to 165.
Max. Tool Ψ 110 mm Secondary pitch occupied
Tool holder HSK-A 100
Tool Ψ with restriction 250 mm Secondary pitch free
Tool length max. 450 / 800 mm
Tool weight max. 35 kg
Max. Tool weight per tower 600 kg
Chip-to-chip time up to 12kg / over 12kg ca. 5,0 / ca. 8,2 sec
Pallet change time ca. 20 sec
Machine Dimensions & Connection Data
Space requirement ca. 8,2 x 6,0 x 4,6 m
Machine weight ca. 31.000 kg
Connected load 90 kW
Supply fuse 160 A
Operating frequency 50 Hz
Operating voltage 400 V 3AC
control FANUC Series 31i Model A5
Equipment, Accessories
• 2-fold pallet changer without working space protection
• 3 separate set-up stations with threaded hole pallets 800 x 1,000 mm
• Tool magazine with 165 places HSK-A 100, own operating terminal on the magazine side,
make SIEMENS
• NC rotary table, increment 0.001
• Main spindle 6,000 min-1, 2 gear steps
• 3D measuring probe make RENISHAW
• Electronic handwheel
• Machine enclosure with completely closed working area
• Chip conveyor, ejection under floor
• Coolant unit with filter and booster pumps, internal coolant feed
(machine was connected to central coolant supply)
• Exhaust mounted on the machine cover
• Program running hours approx. 18,200 h
 
  29
IDMA34802
MakeOKK,Japan
ModelMCH-1000II
YOM2011
ConditionGood Condition
PhotoSee Photo
FANUC 0i-MD
X/Y/Z 1600mm/1270mm/1020mm
1000 x 1000 mm
sub-table:1200 x 1200 (2pcs)
B axis : 1°
Table Load:2000kg
Spindle : 4500rpm
ATC : 80T
 
  30
IDMA34791
MakeMakino
ModelMC108
YOM
ConditionGood Condition
PhotoSee Photo
FANUC 15-MA
6-APC 1500X1500 with Index 1° and 120-ATC-CAT-50
4500-RPM X-1550 Y-1050 Z-1050
 
  31
IDMA34790
MakeHeckert
ModelHEC630Athletic
YOM2007/17
ConditionGood Condition
PhotoSee Photo  |  See Video
CONTROLS Fanuc 31i
- Pallet dimensions 630 x 630 mm
- Table B-Achse 0,001x360000
- TRAVELS (x/y/z) 1200/950/1200 mm
- rapid 60m/min
- tools with refrig.thr.spindle//Werkzeugaufnahme SK50 Form A with inner cooling
- Spindelumdrehungen/Spindle working rotation 20-6000 U/Min RPM
- Spindel kW 26-43
- Balluff- Werkzeugindifikation (tool correction / tools identification)
- Tools magazin 80 Tools Places
- Tools anti-brake control system/Werkzeugbruchkontrolle
- Knoll KSS System with vacuum rotation filter / Anlage mit Vakuumsrotationsfilter
- band conveyor/Gliederbandfφrderer
- weight of machine/Maschinengewicht ca. 25 t


- 2 pallet rotating/ drehbar
Option:
- Fastems FPC 1500 /pallet system with/Palettenspeicher mit 10 Paletten
You can use the machine as a two-pallett-system or put it with the 10-Pallett-Fastems.
 
  32
IDMA34692
MakeMitsui Seiki
ModelFH630R
YOM2006
ConditionGood Condition
PhotoSee Photo
Controller : FANUC 31i
Travel : X/Y/Z 1000mm/800mm/850mm
Table : 630 x 630 mm
B axis : 1°
Table Load:1000kg
Spindle : 6000rpm BT50
ATC : 120T
2 APC
XYZ Linear scale
CTS (spindle through coolant)
chip conveyor
 
  33
IDMA34684
MakeMakino,Japan
Modela81-5XR
YOM2007
ConditionGood Condition
PhotoSee Photo
Controller : Professional 5
Travel : X/Y/Z 730mm/730mm/800mm
Table : 630 x 630 mm
Table Load:1200kg
Spindle : 10000rpm
ATC : 40T
 
  34
IDMA34675
MakeDaewoo
ModelDHP630
YOM2002
ConditionGood Condition
PhotoSee Photo
Table size: (2) 24.8" X 24.8"
X-Axis Travel: 39.44"
Y-Axis Travel: 33.46"
Z-Axis Travel: 33.46"
Pallet Positioning: 1 degree
Taper in spindle: 50
Tool Changer Positions: 60
Control Type: Fanuc 16iM
Equipped With: Fanuc 16iM CNC Control, 60 Position Automatic Tool Changer, Flood Coolant, Complete Enclosure, Chip Conveyor, Coolant Filtration System, Auto Doors, Remote Jog Handle, Oil Temperature Controller
 
  35
IDMA34673
MakeKitamura
ModelMyCenter HX630i
YOM2007
ConditionGood Condition
PhotoSee Photo
Control Type:Fanuc 16i-MB
Axis: 4
Pallet Length:630mm
Pallet Width:630mm
Pallet Capacity:1,497 kg
Pallet Indexing (B-Axis):0.001°
X-Axis Travel:1,100mm
Y-Axis Travel:919mm
Z-Axis Travel:1,049mm
Rapid Traverse Rate (X/Y/Z):2,362 ipm
Spindle Taper:CAT 50
Spindle Speed:5,000 rpm
Spindle Motor (HP):53 hp
Tool Changer Capacity 50
Coolant Through Spindle:yes
Machine Dimensions:5,766mm x 4,089mm x 3,531mm
Machine Weight:20,952 kg
EQUIPPED WITH:
- Fanuc 16i-MB Control
- Chip Conveyor
- Coolant Tank & Pumps
- Cooljet High Pressure Coolant Thru Spindle
- Renishaw Probing
 
  36
IDMA34672
MakeKitamura
ModelHX630I
YOM
ConditionGood Condition
PhotoSee Photo
- 2 Step Geared Head
- 2 Station APC
- 50 Tool ATC Cat 50
- (1) Full Fourth Axis Pallet
- (1) Full 5th Axis Pallet
- Through Spindle Coolant
- Base Wash Coolant
Equipped w/ Fanuc 16iMB Control, Double Scraper Lift Up Chip Conveyor, Nano
Software
 
  37
IDMI7757
MakeMazak,Japan
ModelUltra650
YOM1995
ConditionGood Condition
PhotoSee Photo  |  See Video
(2) 25"X25" T-SLOT PALLETS,
TRAVELS:
X - 40", Y - 31.5", Z - 31",
B (TABLE INDEXING) - 360 DEG. (IN 1 DEG. INTERVALS),
SPINDLE SPEEDS TO 7000 RPM,
CAT 50 SPINDLE TAPER, 120 STATION ATC, THROUGH-SPINDLE COOLANT, CHIP BLASTER HIGH PRESSURE COOLANT SYSTEM,
WITH MAZITROL M-32 CNC CONTROL
 
  38
IDMA34670
MakeMazak,Japan
ModelFH4000
YOM2001
ConditionGood Condition
PhotoSee Photo
Mazatrol PC-FUSION-CNC 640M Controller
Max Spindle RPM 12,000
Max Z Travel 24.80
Max X Travel 22.05
Max Y Travel 20.08
40 Tool Magazine
Thru Spindle Coolant
 
  39
IDMI7754
MakeOKK,Japan
ModelPCH600
YOM
ConditionGood Condition
PhotoSee Photo
FANUC OM
Speed spindle 4.500Tr-min
2 pallet 630mm x 630mm
BT50 cones
ATC 40
Travle X 800mm Y 800mm Z 700mm
Axis B360 degrees
 
  40
IDMI7753
MakeMazak,Japan
ModelFH6800
YOM12/1999
ConditionGood Condition
PhotoSee Photo
24.8 X 24.8 PALLETS (2)
X,Y,Z = 41.3", 31.5", 34.7"
MAX WORKPIECE HEIGHT: 39.4"
MAX WORKPIECE DIAMETER: 41.2"
FUSION 640M CONTROL
WGT: 42,000LBS - SHIPS WITH TOOL CHANGER REMOVED
 
  41
IDMA34634
MakeWMW Heckert ,Germany
ModelCW1000
YOM
ConditionGood Condition
PhotoSee Photo
CNC control N 600-3, table Size 1000 x 1000 mm, 2 PCs X / Y / Z 1350/1250/790 mm spindle Taper SK 50, 20 variable Speed - 4200 R / min , the diameter of the front bearing of the spindle 110 mm, flow 1 - 5000 mm / min , min-rapid traverse 15 m , a 60 - fold tool changer, chip conveyor, tools
 
  42
IDMI7732
MakeMakino
ModelMC65
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc 15M
S:635*560(100~660)*510(200~710)
T:500*500
ATC-60, APC-6
15~4000rpm
BT50, 6 axis
 
  43
IDMA34626
MakeMitsui Seiki
ModelHU50A
YOM
ConditionGood Condition
PhotoSee Photo
CNC: Fanuc
Table: n° 2 dim. 500x500
stroke: mm 720 x700 Z.650
AX B: 360.000°
 
  44
IDMA34625
MakeMazak,Japan
ModelH630
YOM1991
ConditionGood Condition
PhotoSee Photo
Cnc: MAZATROL M 32
Pallets dimension:mm 630 X 630
n° pallets:n° 2
Stroke:mm 1.000 x 800 Z: 750
Power alimentation:380V- 50 Hz
 
  45
IDMA34562
MakeMitsui Seiki
ModelHS5A
YOM1986
ConditionGood Condition
PhotoSee Photo
Fanuc11M
Table 630Χ630mm 2PC 
Bt50 ATC-32 station
 
  46
IDMA34453
MakeMazak,Japan
ModelFH680
YOM1996
ConditionGood Condition
PhotoSee Photo  |  See Video
Specifications:
Pallet Size: 24.8" x 24.8"
Travels:
X-Axis: 41.3"
Y-Axis: 31.5"
Z-Axis: 31.5"
Spindle Taper: CT 50
Spindle Motor: 40 HP
Spindle Speed: 10,000 RPM
Tool Change Capacity: 80 ATC
Pallet Load Capacity: 2800 Lbs
Equipped With:
Mazak M Plus CNC Control
Chip Conveyor
Coolant
QTY : 3
 
  47
IDMA34451
MakeStarrag-Heckert
ModelCWK500D
YOM2001
ConditionGood Condition
PhotoSee Photo
Pallet Size 500mm x 500mm
Number of Pallets 2
Rotation on Pallets .0001 (360,000 deg.)
Load Capacity 800kg
Max. Rotation Speed 25 RPM
Swing 800mm
Travels:
X-Axis 750mm
Y-Axis 750mm
Z-Axis 750mm
Spindle Taper CAT#40
Spindle Speed 10,000 RPM
Spindle Motor 43.6 HP
Tool Changer 60 pos ATC
Max. Feed Rate 1575 IPM
Dimensions 5.64m x 6.35m x 3.34m H
Approx. Weight 31,460 lbs (14,300 kg)
Equipped With:
* Fanuc 16i-M CNC Control
* Full 4th Axis (360,000 Rotation) on table
* Chip Conveyor
* Thru Spindle Coolant
* Flushing Shower Coolant
* Spindle Chiller
* Glass Scales
* Renishaw Probe
***The machine needs cooling fan disk blade for the hydraulic unit. There is also a grease/lube fault and massive air leaks in multiple areas of the machine.
 
  48
IDMA34442
MakeMakino
ModelA55
YOM1993
ConditionGood Condition
PhotoSee Photo
Longitudinal Travel (X-Axis) : 22"
Vertical Travel (Y-Axis) : 22"
Spindle Travel (Z-Axis) : 23.8"
Pallet Size : 15.75" x 15.75"
Maximum Pallet Load : 1100 Lbs
Number of Pallets : 2
Pallet Indexing : 1°
Feed Rate (All Axes) : 3307 IPM
Rapid Traverse (All Axes) : 3307 IPM
Spindle Taper : CAT 40
Maximum Spindle Speed: 12,000 RPM
EQUIPPED WITH: Fanuc O-MC CNC Control
40-Position Automatic Tool Changer
Chip Conveyor
 
  49
IDMA34441
MakeMakino
ModelA99
YOMRebuilders 2019
ConditionGood Condition
PhotoSee Photo
Pallet Size:31.5" x 31.5"
Number of Pallets: 2
Max. Pallet Load: 3960 Lbs.
X-Axis Travel:39.4"
Y-Axis Travel:39.4"
Z-Axis Travel:37.4"
B-Axis: .001°
Spindle Taper:CAT 50
Spindle Motor:40 HP
Max. Tool Weight: 44 Lbs.
Max. Tool Size:11.8"x19.7"
EQUIPPED WITH:
Fanuc 16i CNC Control
Full 4th-Axis
120-Tool Automatic Tool Changer
Automatic Pallet Changer
Coolant Thru Spindle
Chip Conveyor
Approximate Overall Dimensions: 5715mm x 2794mm x 3302mm
Approximate Weight: 22675 Kg
 
  50
IDMA34427
MakeDeckel Maho ,Germany
ModelDMC63H
YOM2002
ConditionGood Condition
PhotoSee Photo
Controller : Siemens Sinumerik
: 840D powerline
Pallet Size : 400 x 500 mm
Pallet Indexing Angle : NC rotary table 360 ​​° x 0.001 °
Max Load : 350 Kg (1 Pallet)
X/Y/Z Axis Travel : 630 / 630 / 560 mm
Spindle Speed : 12,000 RPM
Spindle Motor Power : 22.0 kw
Spindle Taper : HSK-A63
ATC : 40
Accessories : Coolant tank, Coolant pump, Conveyor
Machine Weight (Approx) : 15,000 Kg
Machine Dimension (LxWxH) : 4450 x 3000 x 2420mm
 
  51
IDMI7665
MakeHuller Hille
ModelNBH450
YOM2010
ConditionGood Condition
PhotoSee Photo
WEIGHT: 12800 KG
SPINDLE SPEED RANGE: 25-8000
Cantrol Siemens 840D
X-AXIS MOVEMENT: 630 MM
Y AXIS MOVEMENT: 500 MM
Z-AXIS MOVEMENT: 550 MM
Pallet Table Size
400 X 500 MM
Total Pallet 8Nos
 
  52
IDMA34414
MakeMakino
ModelA55
YOM1994
ConditionGood Condition
PhotoSee Photo
X Axis: 22.05"
Y Axis: 22.05"
Z Axis: 22.05"
Pallet Size: 15.75" x 15.75"
Number of Pallets: 2
Max Table Load: 880 LBS
Spindle Speed: 12,000 RPM
Spindle Taper: #40
Motor: 30 HP
ATC: 40
Machine Weight: Approx. 20,000 LBS
Equipped With:
Fanuc Professional 3 Control
Chip Conveyor
12,000 RPM Spindle
40 Position Tool Changer
 
  53
IDMA34409
MakeHurco
ModelHMX630
YOM2011
ConditionGood Condition
PhotoSee Photo
X-Axis: 41.3”
Y-Axis: 35.4”
Z-Axis: 39.4”
B-Axis: 360°
Rpm speed: 8000
Working surface(each pallet): 24.8”x24.8”
Floor to pallet surface: 49.2”
Spindle center to pallet surface min/max: 4.7”/40.2”
Spindle Nose to Pallet Center min/max: 6.1”/45.5”
Load capacity: 2200lbs
90 pocket tool changer
Equipped with:

Advanced verification graphic
NC productivity package
Industry standard nc
Ultipockets
Insert pockets
Helical ramp
Rigid tap
Select surface finish quality
Tool and material library
Tool change optimization
Chip conveyor
 
  54
IDMA34268
MakeMazak,Japan
ModelFH5800
YOM1998
ConditionGood Condition
PhotoSee Photo
Control: Mazatrol 640M
X travel: 710 mm
Y travel: 660 mm
Z travel: 610 mm
No. of pallets: 6
Pallet dimensions: 500x500 mm
Maximum weight on pallet: 500 Kg
Number of tools: 80
Tool bore: Iso40
Spindle speed: 12000 Rpm
Coolant: through spindle
Accessories: about 60 cones + 1 cube
Machine total weight: 14500 Kg
 
  55
IDMA34267
MakeMazak,Japan
ModelFH5800
YOM2001
ConditionGood Condition
PhotoSee Photo
CNC Mazatrol fusion 640M
Axis B:index
Pallets dimension: mm 500 x 500
n° pallets::n° 2
Capacity loading pallet: kg. 500
n° of tools: n° 40
Stroke: mm 710 x 610 Z: 760
Rpm: 25.000
Tool bore: ISO 40
Power alimentation:380V- 50 Hz
Rehisaw, chip evacuator, 15 bar cooling - indexed table 360,000
 
  56
IDMA34258
MakeOKK
ModelHM630
YOM2008
ConditionGood Condition
PhotoSee Photo
CNC Control: FANUC 310 is model A
Axes
X axis mm: 1050
Y axis mm: 900
Z axis mm: 900
B axis: 360,000 positions
Max. rapid traverse speed m / min: 54
Pallet
Number of pallets: 2
Dimensions mm: 630 x 630
Max. workpiece weight kg: 1300
Spindle
Spindle speed rpm: 10000
Spindle drive power kW: 25
Tool system
Tool type: BT 50
Positions in magazine St.: 160
Equipment
Internal cooling
Chip conveyor
Electronic handwheel
 
  57
IDMA34256
MakeToyoda,Japan
ModelFA550
YOM1998
ConditionGood Condition
PhotoSee Photo
Control Type Fanuc 15M
Pallet:21.65″ x 21.65″
Travels:29.52″ x 29.52″ x 23.62″
Spindle Speed:12,000 RPM
Equipped With:40 ATC
 
  58
IDMA34253
MakeHaas
ModelEC1600
YOM2004
ConditionGood Condition
PhotoSee Photo
Table:64″ x 36″
Travels:64″ x 30″ x 32″
Spindle Speed: 6000 RPM
Equipped With: 30 ATC
30″ Full 4th-Axis Rotary
Hi-Pressure Coolant Thru Spindle
Renishaw Probe
Programmable Coolant
Two Speed Gear Box
Remote Jog Handle
Dual Chip Augers
 
  59
IDMA34206
MakeMAZAK
ModelFH5800
YOM2001
ConditionGood Condition
PhotoSee Photo
Cnc:Mazatrol fusion 640M
Axis B:index
Pallets dimension:mm 500 x 500
n° pallets::n° 2
Capacity loadin palet:kg. 500
n° of tools:n° 40
Stroke:mm 710 x 610 Z: 760
Rpm: 25.000
Tool bore:Iso 40
Power alimentation:380V- 50 Hz
 
  60
IDMA34205
MakeMAZAK
ModelFF660
YOM2000
ConditionGood Condition
PhotoSee Photo
Cnc:FANUC 18 MB
Axis B:index
Pallets dimension:mm 500 x 500
n° pallets::n° 2
Capacity loadin palet : n° of tools: n° 25
Stroke:660 x 660 Z: 680
Rpm: 15.000
Tool bore:Iso 40
Power alimentation:380V- 50 Hz
power motor:kw 15
 
  61
IDMA34204
MakeQuaser
ModelHX505AP
YOM2010
ConditionGood Condition
PhotoSee Photo
Cnc:FANUC 18 MB
Pallets dimension:mm 500 x 500
n° pallets:n° 1
Capacity loadin palet:kg. 500
n° of tools:n° 30
Stroke: 762 x 640 Z: 840
rpm : 6.000
Tool bore: BT 50
Power alimentation:380V- 50 Hz
Wheight:kg. 13.000
Hour work:n° 6.700
Years minifacture:2.010
dimension / size:mm 3.040 x 4.840 x 3.030
 
  62
IDMA34203
MakeDAENWOO
ModelACE500-HP
YOM2005
ConditionGood Condition
PhotoSee Photo
Type:ACE 500 HP
Cnc:FANUC
Pallets dimension:mm 500 x 500
n° pallets:n° 10
n° of tools:n° 196
Stroke:850 x 700 Z: 750
Tool bore:BT 50
Power alimentation:380V- 50 Hz
Weight:kg. 27.600
Hour work:n° 46.900
 
  63
IDMA34202
MakeMitsui Seiki
ModelHU50A
YOM1997
ConditionGood Condition
PhotoSee Photo
Type:HU 50A
Cnc:FANUC 16 M
Pallets dimension:mm 500 x 500
n° pallets:n° 2
n° of tools:n° 60
Stroke: 700 x 700 Z: 650
Tool bore:BT 50
Power alimentation:380V- 50 Hz
Wheight:kg. 12.000
Dimension- size:mm 4690 x2600 x 2930
 
  64
IDMA34201
MakeMatsura
ModelH.Plus-300
YOM2002
ConditionGood Condition
PhotoSee Photo
Cnc:Siemens 840 D
Pallets dimension:300x 300
Stroke:500 x 500 x Z: 500
n° of pallets : n°11
Capacity load table:kg.
Tool bore:BT 40
Spindle speed range:rpm 12.000
Power alimentation:380V- 50 Hz
n° of tools:n° 240
 
  65
IDMA34178
MakeOKK
ModelHM50
YOM1997
ConditionVery good condition
PhotoSee Photo
CONTROL:FANUC 16M
PALLET SIZE
L: 500 mm
W: 500 mm
TRAVERSES (XYZ)
X: 760 mm
Y: 730 mm
Z: 790 mm
SPINDLE SPEED:UP TO 8,000 RPM
SPINDLE TAPER:BT 50
ATC:110 stations, twin carousel
FEED RATE:1 – 4,000 mm/min
TOOL LENGTH:450 mm
TOOL WEIGHT:20 kgs
MACHINE DIMENSIONS:4600 x 3900 x 3200 mm
PLUS
HIGH PRESSURE THROUGH SPINDLE COOLANT
FULL B AXIS MOTION
ISO(BT) 50 SPINDLE TAPER
ROTATING PALLET MOVEMENT
LINEAR RAIL ON X and Y axes
SWARF CONVEYOR
TRANSFORMER
FULLY ENCLOSED INTERLOCK GUARDING
 
  66
IDMA34155
MakeMakino,Japan
ModelA61-5XR
YOMNew in 2007
ConditionGood Condition
PhotoSee Photo
Professional 5
T:500x500
2 APC
S (XYZ) :730X650 X800
HSK -A63 20,000rpm ATC-60
Spindle Thru Coolant
Chip Conveyor, tools ANS extra Pallet
 
  67
IDMI7564
MakeOKK,Japan
ModelPCH600
YOM
ConditionGood Condition
PhotoSee Photo
FANUC OM Speed spindle 4.500Tr-min 2 pallet 600x600 BT50 cones ATC 40 Travle X 800mm Y 800mm Z 700mm Axis B360 degrees
 
  68
IDMI7563
MakeMakino
ModelA55
YOM
ConditionGood Condition
PhotoSee Photo
Pallet Size : 400mm X 400mm Travels : 560mm X 560mm Atc : 128 Control : Fanuc (Professional 3)
 
  69
IDMI7511
MakeMazak,Japan
ModelMazatek H630
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Pallet size:630 x 630 mm,
Machine was imported with Mazatrol control and now retrofitted with all new mitsubishi control M70.
Machine is with BT50
Geared head spindle,
800 tools magazine, 6 pallets magazine,
Travel X x Y x Z: 1000/800/750 mm,
 
  70
IDMI7504
MakeKitamura
Model
YOM2000
ConditionGood Condition
PhotoSee Photo
TABLE SIZE : 500mm x 500mm
CONTROL : FANUC 15M
 
  71
IDMI7503
MakeCLOCK
ModelMom
YOM2002
ConditionGood Condition
PhotoSee Photo
TABLE SIZE : 600mm x 600mm
CONTROL : FANUC 16iM
 
  72
IDMI7483
MakeOKK
ModelHM40
YOM2000
ConditionGood Condition
PhotoSee Photo  |  See Video
X Axis : 650.0 mm
Y Axis : 500.0 mm
Z Axis: 550.0 mm
Rapid-48
Control : Fanuc 16i-M
Pallet Size: 400mm X 400mm
Year : 2008
Tools Holder : 60 Nos
Spindle Taper : BT 40
Spindle Rotation : 8000 rpm
Spindle through coolant
Weight : 9000 Kgs
Repitability XYZ Axis-0.003
Spindle Runout-0.002
 
  73
IDMA34050
MakeMazak,Japan
ModelFF510
YOM1997
ConditionGood Condition
PhotoSee Photo
Control : Fanuc SERIE 18i-M
Axis X:510 mm
Axis Y:510 mm
Axis Z:510 mm
Rotary table (4th axis) 1 deg.
Table length:400 mm
Table width:400 mm
Max. part weight:250 kg
ATC : 16 tools
Tool Type : BT40
Max. spindle speed:15000 rpm
Quantity: 2 nos
 
  74
IDMA33937
MakeMazak,Japan
ModelHCN6000II
YOM2008
ConditionExcellent
PhotoSee Photo
20" x 20" PALLETS
31.5" X 31.5" Y 31.5" Z
CAT 50, 10,000 RPM, 80 ATC
FULL 4TH AXIS
1000 PSI COOLANT
MATRIX CNC
 
  75
IDMA33936
MakeWMW Heckert ,Germany
ModelCWK800
YOM1998
ConditionGood Condition
PhotoSee Photo
Travel X / Y / Z: 1140 / 910 / 875 mm
Pallet size: 1000 x 800 mm
with CNC control Siemens 840D
NC-turn table with path resolution 0.001°
2-fold Interchangeable pallet system
Tool chain magazine with 80 tool places
coolant unit, oil mist extraction
 
  76
IDMA33885
MakeMori Seiki
ModelNH6300
YOM2005
ConditionGood Condition
PhotoSee Photo
MitsubishiM730UM
X:Y:Z= 1050/900/1030
Table :630*630
8000RMP
BT50
B -axis index optional
 
  77
IDMA33878
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1 off Kitamura Mycenter HX250 CNC Horizontal Machining Centre
Year: 1999,
Control: Yasnac i80M,
X-Axis: 305mm,
Y-Axis: 305mm,
X-Axis: 330mm,
Full B-Axis,
Table: 254 x 254mm,
Spindle speed: 12,000 rpm,
Auto tool changer (ATC): 24,
1 off Kitamura Mycenter HX250 CNC Horizontal Machining Centre
Year: 2000,
Control: Yasnac i80M,
X-Axis: 305mm,
Y-Axis: 305mm,
X-Axis: 330mm,
Full B-Axis,
Table: 254 x 254mm,
Spindle speed: 12,000 rpm,
Auto tool changer (ATC): 24,
1 off Kitamura Mycenter HX250i CNC Horizontal Machining Centre
Year: 2001,
Control: Yasnac i80MI,
X-Axis: 305mm,
Y-Axis: 305mm,
X-Axis: 330mm,
Full B-Axis,
Table: 254 x 254mm,
Spindle speed: 15,000 rpm,
Auto tool changer (ATC): 40,
 
  78
IDMA33868
MakeMakino
ModelMC108H-A60
YOM1992
ConditionGood Condition
PhotoSee Photo
FANUC15-M BT50 ATC 60 pieces 800 square 2 pallet Spindle rotation speed 4000rpm Stroke X1050 Y810 Z810 Right-out tip conveyor tool Courante 5 degree index Installation dimensions (actual size): 6600 x 4500 x 3200 mm
 
  79
IDMA33867
MakeMitsui Seiki
ModelHS5A
YOM1990
ConditionGood Condition
PhotoSee Photo
FANUC15-M BT50 ATC3 2 630 square 2 pallet Spindle speed 15000rpm Chip conveyor
 
  80
IDMI7384
MakeAms
ModelMCH400
YOM
ConditionGood Condition
PhotoSee Photo
WITH BT 40 GEARD HEAD SPINDLE NO.OF TOOL 45 PALLET CHANGER X =600 Y = 500 Z =500 B =1° CONTROLLER FANUC MAKE
 
  81
IDMA33842
MakeMazak,Japan
ModelPFH5800
YOM2006-2002
ConditionGood Condition
PhotoSee Photo
Quantity:2
Mazatrol 640 M
XYZ = 730/730/740 mm
Spindle:15000 RPM
2 x Pallett 500 x 500 mm
Table: B-Axis 360.000x0,0001
Power:22 kW (30 kW)
Tool Changer:160 poss. (ISO 40)
(optional) 20 Pos.
The machine was bought as a 2 pallet machine and later integrated into a pallet system with a sister machine.
One machine can be used with two pallets. Or you can use 2 machines with 20 pallets.
 
  82
IDMA33801
MakeHitachi Seiki,Japan
ModelHG400III
YOM2000
ConditionGood Condition
PhotoSee Photo
Control: Seiki Secicos 16 M,
B axis,
Twin 400 mm pallets,
With much tooling
 
  83
IDMA33797
MakeStarrag-Heckert
ModelCWK500D
YOM2001/installed 2005
ConditionGood Condition
PhotoSee Photo
GE Fanuc 16i-M
Pallet Size 19.6" x 19.6" (500mm x 500mm)
Number of Pallets 2
Rotation on Pallets .0001 (360,000 deg.)
Load Capacity 1,760 lbs (800kg)
Max. Rotation Speed 25 RPM
Swing 31.5"
Travels:
X-Axis 29.53"
Y-Axis 29.53"
Z-Axis 29.53"
Spindle Taper CAT#40
Spindle Speed 10,000 RPM
Spindle Motor 43.6 HP
Tool Changer 60 pos ATC
Max. Feed Rate 1575 IPM
Dimensions 5.64m x 6.35m x 3.34m H
Approx. Weight 31,460 lbs (14,300 kg)
Equipped With:
* Fanuc 16i-M CNC Control
* Full 4th Axis (360,000 Rotation) on table
* Chip Conveyor
* Thru Spindle Coolant
* Flushing Shower Coolant
* Spindle Chiller
* Glass Scales
* Renishaw Probe
 
  84
IDMA33450
MakeFritz Werner
ModelTC500
YOM1989
ConditionGood Condition
PhotoSee Photo
Cnc : Siemens sinumerik
Pallet : 500x500 mm
Races X-Y-Z : 630 x 500 x 630
Tool holder : SK 45
Quantity : 2 Nos
 
  85
IDMA33419
MakeMatsuura
ModelH.Plus-300
YOM2004
ConditionGood Condition
PhotoSee Photo
Control unit: ATC Touch panel display
Stroke X-Y: 500 x 500 mm
Rapid: X-Y: 60 mt/min
Spindle speed: 15000 rpm
Slots in storage: n° 51
Type of tool older: BT 40
Spindle motor power: 7.5/15 KW
Max tool diameter: 90-150 mm
Max tool lenght: 300 mm
Max tool weight: 8 KG
Dimension width/Depth: 3720 x 2150 mm
Machine weight: 8300 Kg
 
  86
IDMA33418
MakeHeller,German
ModelMCS-U300
YOM1999
ConditionGood Condition
PhotoSee Photo
Control unit: Sinumerik 840 D
Spindle diameter: 110 mm
New spindle installed in: 2018
Table dimensions: 630x800 mm
n°2 Pallet: Indexing 360x1°
Stroke X-Y-Z: 1000x800x1100 mm
Workpiece X-Y: 1250x1200 mm
Spindle speed: 4500 rpm
Slots in storage: n° 120
Type of tool older: SK 50
Tool holder: Plus 120 pieces
Max tool diameter: 100/270 mm
Internal cooling: max 50 Bar
Renishaw probe: Yes
Set-up pallets: 9 PIECES
Chip conveyor: YES
Power consumption: 68 KVA
Weight: 23500 Kg
Regular service and mantained
 
  87
IDMA33259
MakeMori Seiki
ModelNH5000
YOM2002
ConditionGood Condition
PhotoSee Photo
X-Axis Travel : 629.92mm
Y-Axis Travel : 599.44mm
Z-Axis Travel : 670.56mm
Number of Pallets : 2
Pallet Size : 500.38mm x 500.38mm
Table Load Capacity : 1100 Lb.
Pallet Indexing (B-Axis) : 1°
Max Workpiece Swing Diameter : 728.98mm
Distance from Table Surface to Spindle Center : 50.80mm - 650.24mm
Max Workpiece Height : 899.16mm
Spindle Taper : #40
Max. Spindle Speed : 14,000 RPM
Max. Tool Weight : 17.6 Lb.
Max. Tool Length : 180.34mm
Hours as of 9-11-2019
Power On : 86,340
Cutting : 37,165
Free Purpose : 45,359
EQUIPPED WITH:
Mori Seiki MSG-501 CNC Control
120-Pocket Automatic Tool Changer
Chip Conveyor
Mist Buster
Transformer
 
  88
IDMI7210
MakeYasda
ModelYMB90N
YOM
ConditionGood Condition
PhotoSee Photo
1 Spindle motor (A.C. motor) KW 18.5
2 Spindle revolution RPM 40 ~ 3200
3 Spindle speed change(gear 2- stage speede change) S S4 DIRECT COMMAND
4 Spindle diameter MM 110
5 Tool holding device Taper Shank - Pullstud system
6 Tool type BT BT 50
7 X-axis travel distance MM 900
8 Y-axis travel distance MM 800
9 Z-axis travel distance MM 700
10 Pallet Size MM 750 x 630
11 Table workable area MM 750 x 630
12 Table indexing angle ° (BI x DIRECTION) 1°
13 Min. dist. Between spindle center line &the table surface MM 0mm
14 Min. dist. Between table center & the spindle nose end MM 200mm
15 Positning speed M/MIN (12m/min. Y-AXIS ONLY) 10m/min.
16 Weight of machine KG 15000
 
  89
IDMA33076
MakeKitamura
ModelMycenter HX250G
YOM2013
ConditionGood working condition
PhotoSee Photo
• Control Arumatic Mi Control
• Number of palettes 2 pcs
• Table size 254 x 254 mm
• Table load 100 kg / palette
• Max size of wpc. D350 x 400 mm
• X travel 305 mm
• Y travel 305 mm
• Z travel 330 mm
• B axis 0,001 - 360 degree
• Distance from table surface to spindle center 60 - 365 mm
• Distance from table center to spindle nose 60 - 390 mm
• Toolholder HSK40E
• Spindle speed 150 - 30000 rpm
• Driving system Directdrive
• Torque 47,7 Nm
• Feedrate X/Y/Z 0 - 48000 mm/min
• B axis 12000 degree/min
• Rapid feed X/Y/Z 60 m/min
• B axis 18000 degree/min
• APC change time 7,9 sec.
• ATC capacity 40-fold (Random type)
• Max tool size D50 x 200 mm
• Max tool size D75 x 200 mm (adjacent tool pot empty)
• Max tool weight 2 kgs
• Spindle power AC 7,5/11 kW
• Power required 30 kVA
• Machine size LxWxH 2311 x 2939 x 2207 mm
• Place required ca 3300 x 3940 mm
• Weight ca 5500 kgs
Standard accessories
• Working lamp
• Towel lamp
• Oil cooler
• Coolant unit
• Aut. lubrication system
Extra accessories are with the machine free of charge
• Pokolm 2508 E 40 tool holders …………………………………………………… 3 pcs
• Thermogrip HSK-E40/TSF 600 schrink tool holders …………………….. 2 pcs
• Aluminium triangle Parotec with Power Grip clamping ssystem …. 2 pcs
• Aluminium clamping plate 305x315x35 mm with Parotec Power
Grip clamping system …………………………………………………………………. 2 pcs
• Palett mounting kit Parotec PowwerGrip + Festo air tap ……………. 1 pc
• Kitamura Oil Air Lubrikant 1 L……………………………………………………… 2 pcs
• Parotec PowwerGrip nut for fixture plate…………………………………….13 pcs
• New fixing brackets and machine preparation by KITAMURA service
representative and also condition declaration by them
 
  90
IDMA33068
MakeHaas
ModelEC1600YZT
YOM2012
ConditionGood Condition
PhotoSee Photo
Table Size: 64" x 36"
Table Load Capacity: 10,000 Lbs
X-Axis Travel: 64"
Y-Axis Travel: 50"
Z-Axis Travel:40"
Spindle Nose CAT #50 - 2 Speed Geared
Spindle Speed: 6,000 RPM
Spindle Motor 30 Min. / Cont. 30 HP
Number of Tool Positions 30 + 1 Station Tool Changer
Maximum Tool Diameter/Length/Weight 10" / 20" / 30 lbs.
Tool Change Time 10.3 seconds
Rapid Traverse Rates (X,Y/Z) 540 IPM
Cutting Feedrates: 500 IPM
Machine Weight:35,500 Lbs
Equiped with
Haas HRT450 Table w/ 7.5" Thru Hole
16" 3 Jaw Scroll Chuck w/ 8.625" Bore
Manual 11.5" Center Height Tailstock
Haas Wireless Intuitive Programming System
-includes both part and tool probing
1000 PSI High Pressure Coolant Thru Spindle
5th Axis Drive & Wiring -Brushless
.001 Degree Full 4th Axis Table-Brushless
1 MB Program Memory
15" Color LCD Monitor
USB Port Interface
Programmable Coolant Nozzle
Rigid Tapping
High Speed Machining with Lookahead
Haas Intuitive Programming System
User Definable Macros
Spindle Orientation
Coordinate Rotation & Scaling
Early Power Failure Detection Module
Color Remote Jog Handle
Chip Augers
Auxilliary Coolant Filter System
2 Speed Geared Headstock
 
  91
IDMA32943
MakeStarrag-Heckert
ModelCWK500D
YOM2013
ConditionGood Condition
PhotoSee Photo
x-travel 750 mm
y-travel 650 mm
z-travel 700 mm
control Sinumerik 840 D Siemens
work table
table surface area 500 x 630 mm
max. table load 500 kg
boring diameter 20 H6 mm
hole in table 50 H6 mm
T-slots 14 (DIN 650)
numbers of pallets 2
change time of pallets 9 sec
b-axis (table) 0,001 °
Max. rpm 25 U/min
feed
Fast feed speed 40 m/min
Main spindle
turning speed range - main spindle 50 - 10.000 U/min
power capacity - main spindel 31 / 19 kW
tool taper HSK - A63
max. Torque 200 / 165 Nm
tool magazin
toolpiece magazine: chain magazine 120 pos.
max. tool diameter 85 mm
max. tool-dia with free toolbox 160 mm
max. tool length 400 mm
max. tool weight 10 kg
change-time chip to chip 6 sec
total power requirement 35 kW
weight of the machine ca. 13 t
dimensions of the machine ca. 5,5 x 4,8 x 3,0 m
Accessories
Documents
Chip conveyor
Coolant system
high pressure coolant 30 / 50 bar
through spindle coolant
oil mist extraction
paper band filter
B-axis 0,001 °
spindle oil cooler
tool holders 2
 
  92
IDMA32880
MakeMakino,Japan
Modela81M-5X
YOM2013
ConditionExcellent
PhotoSee Photo
X:900 Y:800 Z:1020
B:360/-60 Deg
C:150 Deg
2 APC
Table :630*630
20-8000 rpm
BBT50 double binder
ATC:40
 
  93
IDMA32879
MakeMakino
Model
YOM2013
ConditionGood Condition
PhotoSee Photo
Model : a81M-5XR
X:900 Y:800 Z:1020mm
B:360/-60 Deg
C:150 Deg
2APC
Table :630x630mm
20-8000rpm
BBT50 double binder
ATC:40
 
  94
IDMA32850
MakeYamazaki,Japan
ModelFH-8800
YOM2004
ConditionGood Condition
PhotoSee Photo
Internal management number: 00419
NC: MAZATROL640M
T: 800 mm x 800 mm
Maximum workpiece height: 1250 mm
X, Y, Z axis travel: 1300 mm x 1100 mm x 1000 mm
B-axis indexing: 1 °
Spindle speed: 7,000 rpm
Tool: BT50
ATC: 80
 
  95
IDMA32802
MakeHuller Hille
ModelNB-H170Speed
YOM2004
ConditionGood Condition
PhotoSee Photo
NC – rotary table
Pallet size: 630 x 500 mm 2-fold pallet changer
Smallest partial step: 0,001°
Maximum workpiece circuit: Ψ 900 x 1.100 mm
Max. table load centric: 800 kg
Max. feed rate: 30 Upm
travels
X-axis (rotary table cross): 1.000 mm
Y-axis (head stock vertical): 800 mm
Z-axis (column longitudinal): 800 mm
B-axis (NC – rotary table):360.000°
Feeds
Feed range in X-Y-Z-axis: 1 – 50.000 mm/min
Feed force in X-Y-Z-axis 100% ED: 15.000 N
rapid feed in X-Y-Z-axis: 50 m/min
rapid feed B-axis (NC – rotary table): 30 m/min
Tool magazine, Tool changer
Number of magazine cassettes: 3
Number of tool places each cassette: 50 150 places in total
Max. tool-Ψ: 100 mm
Tool taper: HSK 100
Tool-Ψ with limitations: 125/325 mm
Tool length max.: 650 mm
Tool weight max.: 40 kg
Max. weight each magazine cassett: 650 kg
Tool changing time (max. 25 kg):ca. 2,5 – 4,5 sec
Chip to chip time (VDI 2852, Bl. 1): ca. 7-8 sec
Pallet change time: ca. 12 - 18 sec
Main spindle
Max. power, ED 100/40%: 36/50 kW
Max. torque, ED 100/40%: 344/475 Nm
Max. speed: 12.000 min-1
Tool taper: HSK 100
Coolant equipment
Tank capacity: ca. 1.250 l
External coolant: ca. 30 l/min at 11 bar
Internal coolant: ca. 10 l/min at 25 + 50 bar
Flushing pump device: ca. 160 l/min at 1,0 bar
Flushing pump channel flushing: ca. 60 l/min at 1,7 bar
Chip conveyor – ejection height; 1.200 mm
measurement
Space requirement: ca. 7,8 x 6,1 x 3,4 m
Machine weight: 27.000 kg
equipment
 2-fold pallet changer with in total 4 piece pallets 630 x 500 mm (2 pallets extra)
 Tool magazine with 150 places HSK 100
 NC-rotary table pitch 0,001°
 Main spindle 12.000 min-1/36 kW
 3D-measuring probe RENISHAW OMP 60
 Machine cover with fully enclosed working area
 2 St. chip conveyors longitudinal
 Coolant equipment with paper band filter, internal coolant
 BRANKAMP tool monitoring
 exhaust ELBARON
 Power ON: 34.000 h, Machine run: 21.600 h
Control: Sinumerik 840D
 
  96
IDMA32801
MakeMakino,Japan
ModelA71
YOM2004
ConditionGood Condition
PhotoSee Photo
General Specifications
Pallet 19.7" x 19.7"
X Axis 28.7"
Y Axis 28.7"
Z Axis 31.5"
2 Speed Range Spindle 10,000 RPM
Rapid Traverse 1,968 in/min
Max. Work Piece 31.5" x 39.4"
Max. Payload 1,540 Lbs.
ATC Capacity 60
Spindle Taper 50
Tool to Tool 1.7 Seconds
Chip to Chip 3.2 Seconds
Max. Tool Length 17.72"
Max. Tool Diameter 11.81"
Max. Tool Weight 44 Lbs.
MOTOR SPECIFICATIONS:
Main Spindle Motor 30Kw

Equipped With
Makino Pro 3 CNC Control (Fanuc)
Full 4th Axis Rotary Table
Thru Spindle Coolant System
Hydraulic Unit, Chiller
60 Position Tool Changer
Chip Conveyor
 
  97
IDMI7158
MakeMakino
ModelMCB1210A120
YOM1997
ConditionGood Condition
PhotoSee Photo
Pallet size : 800 x 800mm
Traverses XYZ : 1,250 x 1,050 x 810mm
Spindle RPM : 15,000 rpm
Guide ways Type : Box
Spindle Taper : BT50
Control : Fanuc 16-M (Professional 3)
Tool Change Capacity : 120
Capacity : 3,000 Kgs
High Speed Spindle, TSC (Through Spindle Coolant), Linear Scales
 
  98
IDMI7157
MakeDahlih,Taiwan
ModelMCH800
YOM2007
ConditionGood Condition
PhotoSee Photo
travels : 1350Χ1000Χ1000 mm,
Pallet size 980Χ980mm,
ATC 60 tools (spindle CAT 50) Control FANUC 18iM
 
  99
IDMI7156
MakeToshiba
ModelBMC80
YOM
ConditionGood Condition
PhotoSee Photo
THOSHIBA BMW 80,RETROVATED ON 2006.X 1600,Y 1200, Z 1200
TWINPALLET 800MM ,60TOOLCHANGER,BT50
 
  100
IDMA32785
MakeToshiba
ModelBMC63E
YOM
ConditionGood Condition
PhotoSee Photo
Control: TOSNUC 800
X axis: 1000 mm
Y axis: 800 mm
Z axis: 850 mm
B axis: 360°
Table: 630 x 630 mm, max. 1200 kg
Tool taper: ISO50
Spindle speed 15-5000 rpm
ATC 60
Dimensions: 5400 x 3600 x 2900 mm
Weight: 17,5 t
Pallet changer, cooling system, documentation
 
  101
IDMA32646
MakeMakino,Japan
ModelA71
YOM2008
ConditionGood Condition
PhotoSee Photo
PALLET SIZE .............................. 19.75" X 19.75"
NUMBER OF PALLETS ........................ 2
PALLET CHANGE TIME ....................... 6 SECONDS
PALLET INDEXING .......................... 360,000 FULL 4TH
X-AXIS TRAVEL ............................ 28.7"
Y-AXIS TRAVEL ............................ 28.7"
Z-AXIS TRAVEL ............................ 31.5"
RAPID TRAVERSE RATE ...................... 1969 IPM
SPINDLE TAPER ............................ CAT-50
SPINDLE SPEEDS ........................... 10,000 RPM
SPINDLE DRIVE MOTOR ...................... 47 HP
MATRIX AUTOMATIC TOOL CHANGER ............ 137 TOOLS CAPACITY
AUTOMATIC TOOL CHANGER TYPE .............. DUAL ARM
TOOL CHANGER TIME ........................ 1.7 SECONDS
MAX. TOOL LENGTH ......................... 17.72"
MAX. TOOL DIAMETER ....................... 4.72"
MAX. TOOL WEIGHT ......................... 44.4 LBS
MACHINE WEIGHT ........................... 38,274 LBS
EQUIPPED WITH:
* PROFESSIONAL 5 PC BASE 300 SERIES * MANUAL PULSE GENERATOR
ETHERNET * RS-232 PORT *
* THROUGH SPINDLE COOLANT * 1000 PSI CHIP BLASTER
SHOWER COOLANT, FLUSH COOLANT
* RENISHAW MP700 PROBE * AUTOMATIC MEASURING SYSTEM
* MAYFRAN CONCEP 2000 LIFT UP CHIP CONVEYOR
* HELICAL INTERPOLATION
* SPINDLE CHILLER * AIR DRYER
* TRANSFORMER
*** UNDER 5,000 CUTTING HOURS UNDER POWER
 
  102
IDMI7084
MakeHeller
ModelMC16
YOM2004
ConditionGood Condition
PhotoSee Photo
Pallet Size - 500 X 400mm (2 Pallets)
X - 630mm
Y - 630mm
Z - 630mm
Spindle Taper - HSK 63
ATC - 40 ATC
RPM - 8000
Controller - Siemens Sinumerik 840D
 
  103
IDMA32343
MakeHyundai-Kia
ModelH63
YOM2005
ConditionGood Condition
PhotoSee Photo
Pallet Size 24.8" (2)
Travel: X-Axis 37.4"
Y-Axis 32.5"
Z-Axis 29.9"
Pallet Index 1 Degree
Spindle Speed 80 - 8000 RPM
Spindle Motor 30 / 25 HP
Spindle Taper Cat 50
Spindle Center to Table Top 0 - 32.5"
Spindle Nose to Table Center 6.9" - 36.8"
Tools 60
Rapid Traverse Rates 787 IPM
Pallet Load Capacity 1000 lbs.
Max Tool Diameter 4.3"
Max Tool Length 23.6"
Max Tool Weight 44 lbs.
Machine Dimensions (L x W) 187.8" x 124.8"
Machine Weight 30,800 lbs.

Equipped With
Fanuc 18IMB CNC Control
10.4" Color LCD
Coolant Thru Spindle (1000 psi CoolJet)
Rigid Tapping
60 Tool Magazine
Chip Conveyor (Left Front Exit)
Yellow Operation End Light
Remote Manual Pulse Generator
Two Gear Range Headstock
Heavy Duty Box Way Construction
 
  104
IDMA32292
MakeMitsui Seiki
ModelHU50A Twin Pallet HMC
YOM2000
ConditionGood Condition
PhotoSee Photo
CONTROL:FANUC 15M
PALLET SIZE:
L: 500 mm
W: 500 mm
TRAVERSES (XYZ)
X: 720.1 mm
Y: 849.9 mm
Z: 849.9 mm
SPINDLE SPEED: 12,000 RPM
SPINDLE TAPER: BT 40
ATC: 120 STATIONS
PLUS:
FULL B AXIS
THROUGH SPINDLE COOLANT
TOOL PROBING
CHIP AUGER/CONVEYOR
 
  105
IDMA32291
MakeOkuma,Japan
ModelMA-500HB
YOM2006/ Installed 2007
ConditionGood Condition
PhotoSee Photo
Control:OSP-P200M
Pallet size:500x500mm
Twin pallet
Pallet indexing:Full B-axis
Travel XYZ:700x900x780mm
Spindle taper:BT50
Max.spindle speed:12000rpm
Toolchanger: 100 atc
High pressure coolant:70bar
It can be currently viewed under power in a local Belgian facility

Working hours as of 2018:
Power ON 44702 hours
Power NC 28316 hours
Spindle 17651 hours
Cutting 14178 hours
 
  106
IDMI7068
MakeMAZAK
ModelH630
YOM1989
ConditionGood Condition
PhotoSee Photo  |  See Video
Table Size : 630mm x 630mm No. of axis - 3 + Pallet changer CNC Control System Retrofitted to New Fanuc OIMC in Year 2000 Spindle taper - BT 50, ATC No. of tools- 120, Spindle speed : 20 - 4500rpm, Control-Fanuc OiMC
 
  107
IDMA32068
MakeStarrag-Heckert
ModelCWK400D
YOM2003
ConditionExcellent condition,under power
PhotoSee Photo
x-travel:650 mm
y-travel: 650 mm
z-travel: 650 mm
Number of pallets: 2 way
size of pallet: 400 x 400 mm
Collision free rotation dia/max. job dia: 700 mm
Maximum job height: 750 mm
feeds: 82000 mm/min
rapid traverse: 82000 mm/min
spindle taper: HSK-A63
spindle motor: 31 kW
spindle turning speed range: 10000 U/min
Tool magazine positions: 60 fach
distance spindle centre to table: 30 mm
Distance Spindle nose to Table centre: 50
table load capacity: 400 kg
table – indexing: NC – 0,001
Control: Siemense 840D
speed of turning table: 25 rpm
total power requirement: 63 kVA
weight of the machine ca.: 9,5 t
dimensions of the machine ca.:4,5 x 3,6 x 3,2 m
 
  108
IDMA32062
MakeWMW Heckert ,Germany
ModelCWK400D
YOM2003
ConditionExcellent condition,under power
PhotoSee Photo
x-travel: 650 mm
y-travel: 650 mm
z-travel: 650 mm
Number of pallets: 2 way
size of pallet: 400 x 400 mm
Collision free rotation dia/max. job dia: 700 mm
Maximum job height: 750 mm
feeds: 82000 mm/min
rapid traverse: 82000 mm/min
spindle taper: HSK-A63
spindle motor: 31 kW
spindle turning speed range: 10000 U/min
Tool magazine positions: 60 fach
distance spindle centre to table: 30 mm
Distance Spindle nose to Table centre: 50
table load capacity: 400 kg
table – indexing: NC – 0,001
Control: Siemense 840D
speed of turning table: 25 rpm
total power requirement:63 kVA
weight of the machine ca.: 9,5 t
dimensions of the machine ca.:4,5 x 3,6 x 3,2 m
 
  109
IDMA32057
MakeKitamura
ModelHX 250
YOM1998
ConditionGood Condition
PhotoSee Photo
2x pallets: 250 x 250
Shopping: 320 x 320 x 400
Changer: 24 tools
YASNAC i80
 
  110
IDMA32047
MakeKitamura
ModelMYCENTER ZERO
YOM1997
ConditionGood Condition
PhotoSee Photo
Table: 460 x 320
Races: 305 x 255 x 305
16 tools changer
YASNAC i80M
 
  111
IDMA31992
MakeMAZAK
ModelH-25
YOM
ConditionGood Condition
PhotoSee Photo
Table - 800x800mm
X travel - 1500mm
Y travel - 1070mm
Z travel - 1640mm
Workpiece's weight - 1500kg
 
  112
IDMA31798
MakeDoosan
ModelHC400
YOM2007
ConditionGood Condition
PhotoSee Photo
Pallet size: 393.75 x 393.75 mm,
Number of pallets: 2,
Pallet load capacity: 882 LBS,
Pallet indexing : 1 degree,
X axis travel: 590 mm,
Y axis travel: 50 mm,
Z axis travel: 555 mm,
Spindle speed: 10,000 RPM,
Spindle taper: CAT40,
Spindle motor: 25 HP,
Rapid traverse (X/Y/Z): 1575 IPM,
OAD: 2225 x 4500 x 2775 high,
Weight approximate: 22000 LBS,
Equipped with:
Fanuc 21i MB CNc control,
40 position ATC,
16" x 23.5" tomstones with 11.75" x x 23.25" EM chuck and VAR control,
Coolant thru spindle,
 
  113
IDMA31618
MakeTos Kurim
ModelMCFHD80
YOM
ConditionGood Condition
PhotoSee Photo
Clamping pallet table size: 800 x 800 mm
Working stroke - longitudinal, lateral, vertical: 1000 x 750 x 750 mm
Distance from spindle axis clamping table surface : 0-750 mm pallets
Spindle speed range
Continuous regulation: 1-3000 mm / min
Rapid traverse 7000 mm / min
Maximum workpiece weight: 2500 kg
Number of tools in magazine 50
Dimensions L x W x H : 4490 x 6010 x 3885 mm
Weight 20500 kg
 
  114
IDMA31413
MakeHitachi
ModelHG 800
YOM2000
ConditionGood Condition
PhotoSee Photo
800 x 800mm twin pallet,
Seicos Sigma 16M
Through spindle coolant,
CAT 50,
Full B axis,
X=1120
Y=1050
Z=800mm
 
  115
IDMA30659
MakeKitamura
Model
YOM2000
Condition
PhotoSee Photo
X-AXIS TRAVEL .........20"
Y-AXIS TRAVEL............20"
Z-AXIS TRAVEL............15.7"
B-AXIS TRAVEL............0.001
PALLET-W.................11.8"
PALLET-L.................11.8"
SPINDLE POWER .........30 HP
SPINDLE SPEED .........10,000 RPM
TOOL CHANGER .........40 ATC
MACHINE DIMENSIONS.......116" X 86" X 103"
MACHINE WEIGHT .........15,400 LBS

EQUIPPED WITH:
FANUC 16iM CNC CONTROL
300 PSI THRU SPINDLE COOLANT
2 AUTOMATIC PALLET CHANGER
FULL 4TH AXIS
FILTER MIST COLLECTOR
 
  116
IDMA30647
MakeYouji,Taiwan
Model
YOM2014
ConditionExcellent
PhotoSee Photo
TRAVEL X : 1300MM
Y : 1000MM
Z : 1200MM
TABLE : 800 X 800 (MM)
LOAD : 1500KG
INDEX : 0.001
SPINDLE : 6000RPM
SHANK : BT50
CONTROL : FANUC Oi-MD

COMES WITH THROUGH SPINDLE COOLANT
 
  117
IDMA30617
MakeHeller
ModelMCP250H
YOM1995
Condition
PhotoSee Photo
2 pallets: 630 x 500
Races: 800 x 800 x 710
Magazine: 52 tools
Cone: SA 50
Speed: 6000 rev / min
CNC Kingdom Pro 90
 
  118
IDMA30577
Make
Model
YOMRetrofitted in 2010
Condition
PhotoSee Photo
6 pallet brand, NIGATA, HN130B, Control - Siemens 840D, X - 2000 mm, Y- 1600 mm, Z- 1350 mm, W axis- 400 mm, Pallet size- 1320 x 1320 mm, Automatic pallets changer- n degree 6, Max load on the table- 400 kg, Spindle taper- SK50, ATC- 120 pos. , Spindle speed- 20/2500 U/min, Spindle diameter- 130 mm, Spindle driver- 22/26 kw, Feed range- 4000 mm/min, Rapid travel- 10000 mm/min, Total power requirement- 95 kW, Measuring probe- Renishaw, Cooling throught spindle- Yes, Machine weight- 45 tons, Chip conveyor- Yes, Floor space required- 15 x 6,5 x 4,6 meters
 
  119
IDMA30569
MakeDeckel Maho ,Germany
ModelDMC60H
YOM1999
ConditionGood Condition
PhotoSee Photo
accessories
- Chip extractor
- technical documentation
Sinumerik 840D control system
Technical parameters from the catalog:
- Working table 400x500 mm
- Axis travels:
- X: 600 mm
- Y: 560 mm
- Z: 560 mm
Number of tools in the magazine 40 pieces
Number of pallets 5
Stem 15,000 rev / min
The dimensions of the machine ca. 4800x2800x3000 mm
Machine weight about 11500 kg
 
  120
IDMI6881
Make
Model
YOM
Condition
PhotoSee Photo
HMC 03 (TAL) - PALLET CHANGER, X- 1000, Y-500, Z-500, Table size- 400x400, Weight capacity- 500 kg, CT50 / 40 Tools, FANUC
 
  121
IDMI6880
Make
Model
YOM
Condition
PhotoSee Photo
HMC 01 (TAL) - Single Pallet, X-1000, Y-500, Z-500, Table Size- 400x400, Weight capacity- 500 kg, Magazine tools- BT40/20 Tools, SIEMENS 810
 
  122
IDMA30528
MakeKitamura
Model
YOM1998
Condition
PhotoSee Photo
Type: MYCENTER H250
Cnc: YASNAC 4 axes
X axes: 305 mm.
Y axes: 305 mm.
Z axes: 330 mm.
Spindle speed: 8000 Rpm
Tool changer: 14
N° Pallets: 2
Dimension pallets: 250x250 mm.
Indexing table: 360°
With tools
 
  123
IDMA30467
MakeBurkhardt&Webber
ModelMC60
YOM2002
ConditionExcellent condition,under power
PhotoSee Photo
XYZ = 1000/800/800 mm,
B-axis NC Pallate,
C-axis NC Indexing table ( Horizontal ).
2 x pallets 630 x 800 mm,
Tool changer Station : 100 Seats,
Spindle speeds : 10000 rpm,
Tooltaper : ISO50 or HSK100,
Total Machine weight : approx. 23.5 tons / incl. Accessories.
Control system Siemens 840
 
  124
IDMA30419
MakeOKK,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Number of pallets 2
Pallet size 500 x 500 mm
Pallet load 600 kg
Traves :
X 720 mm
Y 610 mm
Z 640 mm
Feed rates X / Y / Z l - 5000 mm / min.
Rapid traverse X / Y / Z 24000 mm / min,
Spindle Taper BT50
Spindle diameter 85 mm
Spindle drive power 11/15 kW
Spindle speeds of 30 - 4000 rpm.
Tool magazine positions 61-fold
Tool holder MAS BT 50
Tool diameter max. 230 mm
Tool length max. 450mm
Tool weight max. 20 kg
Tool change time 3 s
Machine weight 12600 kg
Machine dimensions L x W x H 4920 x 2400 x 2910 mm
Control Fanuc 18M
Accessories : Chip conveyor
 
  125
IDMA30417
MakeHeller,German
ModelMCP250H
YOM1995
ConditionGood Condition
PhotoSee Photo
2 pallets: 630 x 500
Races: 800 x 800 x 710
Store: 52 tools
Cone: SA 50
Speeds: 6000 rpm
CNC Uni Pro 90
 
  126
IDMA30411
MakeOKK,Japan
ModelHM800S
YOMNew 2015
ConditionGood Condition
PhotoSee Photo
X axis travel: 41.34"
Y axis travel: 35.43"
Z axis travel: 34.65"
Rapid tranverse rate: 2,953 IPM,
Spindle speeds: 12000 RPM,
Spindle motor: 40/35 HP
Magazine capacity: 60 ATC
Table size: 31.49"
Spindle taper: Cat 50
Equipped with
Fanuc 31l-B5 control
12000 RPM cat no.50 spindle integral MS
Bearing lubrication is Oil sho
Brt full 4 th axis table
60 tool magazine
Complete preparation for coolant throught spindle with rotary joint
High torque spindle; AC 60/40/35 HP 460 FT LBS (155 ED)
Big plus double contact spindle
Lift-up chip conveyor with hinge belt for steel
Coolant thru the spindle W/Filtaration system, operating at 1000 PSI
Memory increase from 1280 M to 16,16796 FT (5120 M) 2 MEG
NC option package A
Custom macro B,82 variables
memory increase to 4,199 FT (1280 M), 512 K char/1000 programs
programmable mirror image
Run hour and parts counter display
Tool life management (256 sets)
Tool offsets increase to 200 sets total
work coordinate system, additional 48 types,
 
  127
IDMA30391
MakeMazak,Japan
ModelH500/50N
YOM1997
ConditionGood working condition
PhotoSee Photo
Rapid movement X, Y, Z = 24 m/Min
Travels: X 720 mm, Y 650 mm, Z 650 mm
Main spindle SK50, drive power 15 kW, Nos. of gear steps: 2 (M38-M39), max. spindle
revolutions 6000 rpm, max. torque 600 N/m, max. tool weight 27 Kg, max. tool length
470 mm, max. tool diameter 260 mm, tool exchange time 6.5 sec.,
Pallet 500 x 500 mm with centring ψ 50 mm, 24 x M16 threads, max pallet load 1000 Kg,
max. pallet swing circle 720 mm ψ, pallet change time 12 sec.
Machine weight 14 tons, machine height without suction 2,975 mm, installation area
3,265 x 4,690 mm (without pallet pool), installation area with pallet pool about 5,000 x
8,000 mm, connected value 51.5 kVA, pneumatic value 6.5 bar.
Accessories:
Pallet pool with six pallets and integrated pallet manger(FMC)
Clamping crosses 400 x 400 x 800 (L x W x H) locking mesh 25 mm (6 units)
Automatic machine switch-off after the expiration of unattended operation
Tool chain magazine with 80 tool places
Tool change selectable in two speeds (heavy and light tools)
KNOLL high-pressure filter unit with 400 litres storage tank and 80 bar internal coolant
Oil spray suction above the tool change area Filtermister
MAYFRAN chip conveyor type Con Sep 2000
Renishaw measuring probes MP3 (2 units)
New main spindle in May 2014
Documentation of Mazak Service operations.
Control: Mazatrol M-Plus.
Axis: X, Y, Z, 4 (fourth axis = NC-axis).
 
  128
IDMI6754
MakeMazak,Japan
ModelH400
YOM
ConditionGood Condition
PhotoSee Photo
32 tool changer, Dual pallet
 
  129
IDMA30342
MakeSkoda Czech
ModelMV-W160D
YOM1988 Reconditioned in 2012
ConditionGood working condition
PhotoSee Photo
Two backgrounds 1600 h 2000,
Spindle speed : 3000 rpm.
With Siemens 840D.
 
  130
IDMA30340
MakeHeckert
ModelCWK400D
YOM2003
ConditionGood Condition
PhotoSee Photo
Spindle speed: 15000 mm,
Movement X: 650 mm,
Movement Y: 650 mm,
Movement: 650 mm,
Control:
Speed 15000 rpm,
Taper HSK-A63
NC rotary table, B axis 0,001°
B axis with torque motor
Toolmagazine 60-fold
Rapid traverse 82 m/min
Equipment
2 fold palett changer
Chip conveyor,
Pneumatics throught clamping plate, Coolant unit, Knoll
Robot interface profibus
 
  131
IDMA30248
MakeMitsui Seiki
Model
YOM1990
ConditionGood Condition
PhotoSee Photo
Travel: X: 1800 mm Y: 1500 mm Z: 1200 mm Spindle (W): 500 mm Spindle diameter: 120 mm Distance between spindle and table: 0-1500 mm Distance between spindle center and table center: 500-1500 mm Table length: 1300 mm Table width: 1300 mm Table index angle: 0.001 degrees max. Load : 6000 kg Dimensions of the pallets : 2 x 1300 x 1300 x 200 mm
tool taper : BT 50 Rapid traverse: X: 10000 mm / min Y: 10000 mm / min Z: 10000 mm / min W: 2000 degrees / min Working feed: X.Y.Z.W: 4000 mm / min W: 2000 degrees / min Tool changer positions: 92 Servomotors: X.Y.Z.B.W: FANUC Model 30 M Max.spindle speed: 3150 rpm Engine power: 29.8 kW Machine weight: approx .30000 kg, Control: Fanuc 11ME
 
  132
IDMI6630
MakeOKK
Model--
YOM
ConditionGood Condition
PhotoSee Photo
Travel : 550 x 550 x 550 mm,
BT-40 Maxin -60nos/-,
Under pawer rpm-8000,
40016 I m Fanue.
 
  133
IDMI6629
MakeMakino,Japan
ModelHMC1513
YOM
ConditionGood Condition
PhotoSee Photo
1000 x 1000, BT-50,
Travel : 1000 x 1500 x 1000,
Maxine : 120 Nos/- -RPM -4000.
FANUS 15M.
 
  134
IDMA30050
MakeForest Line
ModelFlexiax508
YOM1995
ConditionGood Condition
PhotoSee Photo
Pallet size : 800 x 800 mm,
4 pallet system,
Travel XYZ : 1200 x 1200 x 1375 mm,
Max.spindle speed : 6000 rpm,
Tool changer : 80 atc.
Control : SIEMENS 840C.
 
  135
IDMA29905
MakeDeckel Maho ,Germany
ModelDMC60H
YOM2005
ConditionGood Condition
PhotoSee Photo
Feed lengthwise/cross/vertical : 60000/60000/60000 mm/min,
Rapid movement lengthwise/cross/vertical : 60/60/60 m/min,
Tool holder SK 40,
Working area 1,
lengthwise : 600 mm,
Cross : 560 mm,
Vertical : 560 mm,
Further,
Clamping system ISO/DIS : 7388/II Type,
Space requirement/weight,
Footprint about (width x depth x height) : 4.8 x 5.0 x 2.8 (4.8 x 5.2 x 2.8) m,
Weight about : 12700 Kgs,
Full protection cabin, chip conveyor, direct path measuring system,
Motor spindle : SK 40, 8000 1/min,
Type of drive AC,
Drive power (100% ED) 13 kW
Drive power (40% ED) 20 kW
Torque (100% ED) 124 Nm
Torque (40% ED) 191 Nm
Revolutions area from – up to 1 – 8000 min (-1)
NC-rotary table with pallet changer
Type of measuring system direct path measuring system
Table area 400 x 500 mm
Centering bore 20H6 mm
Permitted loads (mid of table) 600 Kg
Slot width 14 mm
Nos. of slots 7
Distance of T-slots 50 mm
Changing time about 7 seconds
Turning speed max. 4th axis 25.7 1/min
4th axis (swivel range) 360 x 0.001 degree
Tool clamping ISO 7388
Tool clamping for draw bolts
according to ISO/DIS 7388/2 Type B
Tool-breakage monitoring (by Laser)
Tool-breakage monitoring (by Laser)
with basic software, on break detection
machine stands still.
Tool length and diameter measuring
Tool length and diameter measuring in machine by help of tool-breakage monitoring
inclusive software . For that tool-breakage monitoring required.
Measuring probe Renishaw MP 10 incl. preparation
Measuring probe Renishaw MP 10
SK40 respectively optional selected tool holders, incl. preparation
Tool magazine 90 places
Application horizontal
Type of magazine Kette
Type of grippers Pickup
Nos of tools 90
Rotoclear 8000 rpm
Inspection glass Rotoclear in operators door
for revolutions area 1 – 8000 1/min
Spray pistol at pallet changer
Oil mist separator
Oil mist separator
Throughput volume 1.275 cbm/h, 1.1 kW
Control: Siemens Sinumerik 840D powerline
Type: CNC 3-D path control
 
  136
IDMA29901
MakeMazak,Japan
ModelFH4000
YOM2001
ConditionGood Condition
PhotoSee Photo
ATC:40,
B: 1 degree,
12000 rpm,
Control: Mazatrol 640M
No tools are included.
 
  137
IDMA29878
MakeKiwa,Japan
ModelKNH-426X
YOM
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 18i-M
X Axis Travel: 13.6"
Y Axis Travel: 24"
Z Axis Travel: 26.2"
Pallets, Number of: 2
Pallets Size: 15.7” x 15.7”
Spindle Taper: CAT 40
Spindle Speed: 12,000 RPM
Spindle Motor: 35 HP
Tool Magazine Capacity: 120 ATC
Machine Weight: 23,100 LBS
-EQUIPPED WITH-
Chip Conveyor
Coolant Thru Spindle
 
  138
IDMA29877
MakeWMW Heckert ,Germany
ModelCW400
YOM1984 / 1988
ConditionGood Condition
PhotoSee Photo
Table : 400 x 400 mm,
X travel : 850 mm,
Y travel : 500 mm,
Z travel : 460 mm,
Workpieces weight : 700 kg.
Qty : 2 nos.
 
  139
IDMA29797
MakeToyoda,Japan
ModelFH400J
YOM2008
ConditionGood Condition
PhotoSee Photo
Pallet Size : 15.75" x 15.75",
Table Index Full NC table,
X-axis Travel (column) : 23.62”,
Y-axis Travel (spindle head) : 22.05”,
Z-axis Travel (work table) : 24.80”,
Maximum Work Load on the Pallet : 880 lbs,
Spindle Drive Motor 30 HP (22 kW) for : 15 min. / 25 HP (18.5 kW) cont.
Spindle Output Torque : 123 ft-lb,
Spindle Taper : CAT 40,
Spindle Speed : 15,000 RPM,
Spindle Type Direct drive,
Rapid Feedrate (X, Y, and Z axes) : 2,362 ipm (60 m/min),
Tool Storage Capacity : 40 Standard (60, 119 Optional),
Standard Floor Space : 163" x 99" x 108",
Standard Net Weight : 24,200 lbs.
Equipped With :-
Fanuc 32i-Model A CNC Control,
Chip Conveyor.
 
  140
IDMA29794
MakeEnshu,Japan
ModelJE50S
YOM2005
ConditionGood Condition
PhotoSee Photo
Working Surface of Pallets:15.7" x 15.7" (400 mm x 400 mm)
Maximum Load on Table:880 Lbs.
Travels – X-Axis:19.7" (500 mm)
- Y-Axis:19.7" (500 mm)
- Z-Axis:19.7" (500 mm)
Rapid Traverse Rate – All Axes:2362" / Min.
Spindle Speeds:0 – 12,000 RPM
Spindle Taper:CAT 40
Spindle Motor:20 HP 3/60
Overall Dimensions (Approx.):244" x 64"
Weight (Est):20,000 Lbs.
Equipped With:
Fanuc 18iMB CNC Controls
40-Position Automatic Tool Changer
Chip Conveyor
Mist Collector
Through-Spindle Coolant System
Through-Spindle Mist System
Dual Rotary Automatic Pallet Changer
Renishaw Probe
 
  141
IDMA29785
MakeKitamura
ModelMycenter H-400
YOMNew 1998
ConditionGood Condition
PhotoSee Photo
Working Surface of Table (2):15.7" x 15.7"
Table Travels – X-Axis:24"
- Y-Axis:20"
- Z-Axis:20"
- C-Axis:0.0001"
Cutting Feed Rate – All Axes:393" / Min.
Rapid Traverse Rate – All Axes:944" / Min.
Spindle Taper:CAT 40
Spindle Speeds:10,000 RPM
Maximum Tool Weight:13.2 Lbs.
Motor: 20 HP 220V 3/60
Weight (Est.):19,000 Lbs.
Equipped With:
Fanuc 15M CNC Control (under extended warranty)
Full 4th Axis
100-Position Automatic Tool Changer
Through-Spindle Coolant System
Turbo Chip Conveyor
(6) Pallet System
 
  142
IDMA29742
MakeMitsui Seiki
ModelHU63A
YOMNew 1998
ConditionGood Condition
PhotoSee Photo
Working Surface of Pallets (2):24.8" x 24.8"
Travels – X-Axis: 39.43"
- Y-Axis: 31.49"
- Z-Axis:31.49"
Table Indexing: 1 Degree
Distance From Table to Spindle:5.9" – 37.4"
Feed Rate:0.004" – 394" / Min.
Spindle Speeds:10,000 RPM
Spindle Taper: No. 50 BT
Spindle Motor:40 HP
Overall Dimensions (Approx.):. 214" x 127" x 122" H
Weight (Est.):37,400 Lbs.
Equipped With:
Fanuc 16M CNC Control
Box Way Construction
Coolant System
Chip Conveyor
Automatic Tool Changer
 
  143
IDMA29739
MakeWMW Heckert ,Germany
ModelCWK400
YOMNew 1996
ConditionGood Condition
PhotoSee Photo
Working Surface of Pallets (2):15.75" x 15.75"
Maximum Load on Pallet:880 Lbs.
Pallet Change Time:8 Seconds
Maximum Work Piece Height:29.53"
Travels – X-Axis: 25.6"
- Y-Axis:19.7"
- Z-Axis:25.6"
- B-Axis: 360,000 Degrees
Rapid Traverse Rate:1417" / Min.
Spindle Speeds: 10,000 RPM
Spindle Taper:CAT 40
Spindle Motor – @ 100% Duty:24 kW 3/60
- @ 40% Duty:37 kW 3/60
Maximum Tool Weight: 22 Lbs.
Overall Dimensions (Approx.): 192" x 130" x 108" H
Weight (Est.): 29,000 Lbs.
Equipped With:
Siemens Sinumerik 840D CNC Controls w/ Handheld Remote
60-Position Automatic Tool Changer
(2) Kurt "Carvlock Tower" Workholders
BMF Chip Conveyor w/ Paper Filter
Crate of Miscellaneous Tooling
Coolant System
Full Enclosure
 
  144
IDMA29733
MakeHitachi Seiki,Japan
ModelHC400
YOMNew 1990
ConditionGood Condition
PhotoSee Photo
Working Surface of Table:15.7" x 15.7"
Travels – Longitudinal:20"
- Cross: 18"
- Vertical:18"
Minimum Table Index1 Degree
Distance Spindle C/L to Table Top:2" Min. – 20" Max.
Distance Spindle Nose to Table Center:7" Min. – 25" Max.
Maximum Table Load: 880 Lbs.
Cutting Feed Rates: 0.01" – 200" / Min.
Rapid Traverse Rate:.590" / Min.
Spindle Taper:BT-40
Spindle Speeds: 40 – 6000 RPM
Spindle Motor:7.5 HP Continuous / 10 HP for 30 Min.
Maximum Tool Size:3.7" Diameter x 11.8" Length
Maximum Tool Weight:22 Lbs.
Electrics:220V 3/60
Overall Dimensions (Approx.):99" L-R x 127" F-B x 105" H
Weight (Est.):14,300 Lbs.
Equipped With:
Fanuc 15-M CNC Control
30-Position Automatic Tool Changer
Single Table
Geared Spindle Head
Spindle Chiller
Chip Conveyor
Full Enclosure
(3) Miscellaneous Tool Holders
Manuals
 
  145
IDMA29674
MakeOlivetti,Italian
ModelMecof M240
YOM2007
ConditionGood Condition
PhotoSee Photo
Table: 2000 x 2000 mm,
Spindle: 128 mm,
Cone: 50,
RPM: 7-2000
Power: 29 kW,
X/Y/Z: 3000/2000/1000 mm,
Control: Sinumerik 840D,
Weight: 70 ton
 
  146
IDMA29660
MakeMori Seiki
ModelSH40
YOM1997
ConditionGood Condition
PhotoSee Photo
Pallet size: 400 x 400 mm,
1 Degree indexing,
Traverse X/Y/Z: 560 x 510 x 510 mm,
40 auto tool changer,
Spindle BT40,
Spindle speeds to: 10,000 RPM,
Swarf conveyor, Tooling,
Control: Mori seiki MSC518
 
  147
IDMA29643
MakeMori Seiki
ModelSH50
YOM1996
ConditionGood Condition
PhotoSee Photo
Travel X : 630 mm,
Travel Y : 600 mm,
Travel Z : 650 mm,
Spindle taper : SK 40,
Spindle speed : 20,000 rev / min.
Spindle drive : 22 / 18.5 kW,
Table Indexing : 0.001 degree,
Tool magazine : 180 Number,
Pallet changer : 18 pallets,
With pallet station,
Of pallet: 500 x 500 mm,
Weight machine : 15 tons + 8 tons pallet station.
FANUC Fanuc 16, MSC 516.
 
  148
IDMI6563
MakeDaewoo
Model
YOM
ConditionGood Condition
PhotoSee Photo
Size of pallet : 500 x 500 mm,
Double pallet changer and bt 50 spindle.
 
  149
IDMA29608
MakeMazak,Japan
ModelH1250
YOM1998
ConditionGood Condition
PhotoSee Photo
Pallet 1250 / 2 Pallets.
ATC-120.
4000rpm.
Index 0.001.
X-2000 Y-1560 Z-1200.
Control: MAZATROL M-PLUS.
 
  150
IDMI6529
MakeSuperMax,Taiwan
ModelYCM500B
YOM
Conditionworking condition ,under power
PhotoSee Photo
40 mtrs/min rapid,
Control: Fanuc FS 18 MC ,
Quantity: 2
 
  151
IDMA29466
MakeHitachi Seiki,Japan
ModelHS630
YOM2001
ConditionGood Condition
PhotoSee Photo
Lanes X / Y / Z : 850 mm / 800 mm / 850 mm,
Max. Spindle speed : 10000 RPM,
Spindle power : 30/25 kW ( 40/33 HP ),
Pallete size : 630 x 630 mm,
Pallets changer : 2 no.
Tool magazine with : 60 seats / BT 50,
Rapid : 45000 mm/min,
Feeds : 45000 mm/mm,
Cooling through spindle : 70 Bar,
Spiral chip conveyor 2 x,
NC - rotary table as a full B-axis,
Tool length measurement and breakage control,
Cutting monitor,
Automatic alignment of the work pieces,
Main memory expansion to : 320 m / 128 KB,
Servo Motors :-
X = Fanucmodel a30,
Y = Fanucmodel a40,
Z = Fanucmodel a 30,
Total Machine weight : 16 tons.
With CNC Control 16iM.
 
  152
IDMA29239
MakeMakino,Japan
ModelA55E
YOM2000
Conditionexcellent working condition
PhotoSee Photo
Professional 3 HSKA 63,
2 pallet 400*400,
Principal axis : 10000 rpm,
Stroke : X-560 Y-560 Z-600,
ATC : 30,
Center through coolant,
Chip conveyor,
Index : 0.001.
 
  153
IDMA29225
MakeKitamura
ModelMycenter-H630
YOM1988
ConditionGood Condition
PhotoSee Photo
X/Y/Z axis travel: 1,016/813/765 mm,
Spindle speed: 20-3,500 rpm,
120 ATC,
6 APC,
Control: Fanuc 15-M
 
  154
IDMA29151
MakeDoosan
ModelACE H100
YOM2005
ConditionGood condition,under power
PhotoSee Photo
Table size 1000 x 1000 mm
Number of pallets 2
Movement x-Axis 2000 mm
y-Axis 1250 mm
z-Axis 1250 mm
Table index 1°
Number of tools in magazine 120 pieces
Maximum spindle speed 20-4.500 min
Tool taper CAT 50
CNC control Fanuc 18 i-MB
Tooling comes with the machine.
 
  155
IDMA29150
MakeDoosan
ModelDHM800
YOM2005
ConditionGood condition,under power
PhotoSee Photo
Pallet Size (2 Pallets) : 788 x 788 mm,
Pallet Indexing : 360°,
Table Load : 3,520 Lbs,
X-Axis Travel : 1225 mm,
Y-Axis Travel : 985 mm,
Z-Axis Travel : 985 mm,
Spindle Speeds Minimum - Maximum (3-Speed Geared) : 50 - 6,000 RP,
Main Motor (30 min / continuous) : 40/29,
Spindle Center to Table Top : 198 - 1180 mm,
Tool Changer Positions : 90 ATC,
Tool Change Time (Tool-to-Tool / Chip-to-Chip) : 1.3 / 3.9 Sec.
Rapid Traverse (X, Y & Z ) 945 IPM,
Feed Rate : 0.01 - 472 IPM,
Equipped With :-
Rigid Tapping Remote Jog Handle Coolant Through Spindle Remote Jog Handle Spindle Chiller Unit Turbo,
Chip Conveyor,
Dimensions : Floor Space (L x W x H) : 7000 x 4200 x 3300 mm,
Weight (approx.) : 40,500 Lbs.
Control Fanuc 18iMB.
 
  156
IDMA29148
MakeHeckert
ModelSTC630D
YOM
ConditionGood Condition
PhotoSee Photo
X axis : 1050 mm,
Y axis : 1000 mm,
Z axis : 1160 mm,
A axis round endless (grad),
Min distance work spindle front edge to mid- range : 190 mm,
Min distance work spindle center to upper edge of pallet : 100 mm,
Max allowable high jig of workpieces and for the replacement in the workspace : 1100 mm,
Max Cockpit Load on pallet : 800 kg,
Centering die : 56 H6,
Fastening thread number : 23 x M16,
Distance of directing drilling to table center : 200 +/- 0,013 mm.
HSK 100.
70 bar coolant trough spindle.
60 tools.
Renishaw MP10.
Laser measuring.
 
  157
IDMA29146
MakeNiigata
ModelHN63C
YOM2001
ConditionGood Condition
PhotoSee Photo
T : 630,
S (XYZ) : 1000*850*750,
T : 1°2 APC,
5000 rpm,
BT 50,
ATC 60本,
Fanuc-15M.
 
  158
IDMA29144
MakeHitachi
ModelHS630
YOM2001
ConditionGood Condition
PhotoSee Photo
BT 50, 
ATC 120,
630*630,
8 pallet,
10000 rpm, 
(0.001度割出),
FANUC16-M. 
 
  159
IDMA29143
MakeOkuma,Japan
ModelMA60HB
YOM2000
ConditionGood Condition
PhotoSee Photo
OSP-U10M / BT 50,
ATC 100/630,
2 pallet /5000 rpm,
S : X 1000 * Y 800 Z 810,
1 Degree,
Chip Conveyor,
Center Through.
 
  160
IDMA29127
MakeDoosan
ModelHM5000
YOM2007/2010
ConditionGood Condition
PhotoSee Photo
XYZ : 800/650/650 mm,
B : 0.0001 degrees,
Range : 500 x 500 mm,
Spindle : 6000 1 / min ... Transmission,
Tool : SK 50,
Magazine : 60 times,
IMC : 20 bar,
Control : Fanuc 31iA.
 
  161
IDMI6418
MakeHeller,German
ModelMCP-H300
YOM1998
ConditionGood Condition
PhotoSee Photo
Voltage : 420 V,
Frequency : 50 Hz,
Nominal current : 134 A,
Coolant system,
Heller CNC Unipro 90 System Operator Panel,
Electrical Panel,
Tool Loading & data setting panel,
 
  162
IDMA29062
MakeToyoda,Japan
ModelFA800S
YOM2008
ConditionGood condition,under power
PhotoSee Photo
Travels :-
X : 1.350 mm,
Y : 1.150 mm,
Z : 1.150 mm,
B : 360.000 Positions = 360 x 0,001°- NC Table,
Palettsize : 800 mm x 800 mm – 2 Paletts,
Max. load : 2500 kg,
Max. workpiec dimensions : diameter 1.600 mm x 1.300 mm height,
Palett changing time : 37 s,
Spindle speed : 10 – 6.000 rpm – High Torque Gear Spindle,
Spindle power : 37/45 KW,
Torque : 1.073/1.309 Nm,
ATC with 40 tools,
Rapid feed : 24.000 mm/min – flat box guiding system,
Inner coolant through Spindle,
Additional coolant tank with filter unit,
Chip conveyor.
Renishaw touch probe OMP 60,
Rebuilt with HEIDENHAIN iTNC 530 with HR 410 in 2012 – all new motors, drives, Linear Scales etc.
With 2 pallets changing system.
 
  163
IDMA29018
MakeHitachi
ModelHC630
YOM1990
ConditionGood Condition
PhotoSee Photo
TC 80,
BT 50,
B axis .0001 Degree,
Chip Conveyor,
FANUC-15M.
Tools are not available.
 
  164
IDMA28822
MakeMakino,Japan
ModelA88E
YOM2003
ConditionGood Condition
PhotoSee Photo
5 axis MC,
630 main axis HSK- A100 (18000 rpm),
Basis 0.001 deg,
MDU501-R01 (φ500mm),
Professional,
Coolant through tool and air,
Chip conv
 
  165
IDMA28773
MakeBurkhardt&Webber
ModelMC120
YOM1988
ConditionGood Condition
PhotoSee Photo
X/Y/Z : 2800/1250/1800 mm,
Tool holder : SK 50,
Speeds : 20-4000 RPM,
Rotary table : 1000 x 1000 / 360°,
Tool changer : 98 fold,
2 pallets of : 1400 x 1800,
1 pallet of : 1400 x 1600,
Total power : 85 KW,
Dimensions : 9 x 8 x 5 m,
Weight : 55.2 t.
Control : SIEMENS SINUMERIK 850 M with SPS S 5-150,
Chip conveyer KNOLL,
Tool storage magazin,
ATC with douple gripper,
Pallet changing unit,
paper band filter unit,
Hydraulic unit, tank 260 ltr.
central lubrication, VOGEL, tank 15 ltr.
coolant unit, tank 1200 ltr,
noise/splash protection cabine,
Spindle-automatical tool clamping,
Optoeletronical toolbreakage monitoring,
Electronical measuring unit FA. RENISHAW.
 
  166
IDMI6354
MakeMakino,Japan
ModelMC86
YOM
ConditionGood Condition
PhotoSee Photo
Table size:639 x 630 mm,
Control: Fanuc 11M with tooling available.
 
  167
IDMA28752
MakeMakino,Japan
ModelA99
YOM1998
ConditionGood Condition
PhotoSee Photo
4 AXIS HOR.
Control system Professional 3,
Work table size : 800 x 800 mm,
Max. load capacity : 1800 kg,
X axis travel : 1000 mm,
Y axis travel : 1000 mm,
Z axis travel : 950 mm,
Tool storage capacity : 90 pcs,
Spindle speed : 50~18000 rpm,
Type of tool shank : BT 50.
 
  168
IDMI6339
MakeMazak,Japan
ModelPower center H15
YOM1988/89
ConditionGood Condition
PhotoSee Photo
X/Y/Z movements: 914/838/736 mm,
Twin pallets of 630 mm,
40 ATC, Taper ISO 50, Motor: 30 HP,
Speed 22-5000 RPM,
Spindle through coolant,
Fanuc 6M CNC.
 
  169
IDMA28749
MakeNiigata
ModelSPN50
YOM1995
ConditionGood Condition
PhotoSee Photo
F-16M
BT50
12,000rpm
ATC60
 
  170
IDMA28748
MakeNiigata
ModelSPN50
YOM1996
ConditionGood Condition
PhotoSee Photo
F-16M
BT 50
12,000 rpm
ATC 60
 
  171
IDMA28747
MakeMori Seiki
ModelSH630
YOM1996
ConditionGood Condition
PhotoSee Photo
MSC-516
630角
2 APC
BT 50
12,000 rpm
ATC 60
 
  172
IDMA28746
MakeOkuma,Japan
ModelMA600HII
YOM2012
ConditionGood Condition
PhotoSee Photo
OSP- 200 MA, 6000 rpm
BT-50,ATC-60
XYZ: 1000*900*100
0.001° 2APC T:630*630
Chip Conv/Through Spindle/OSP-3D-D kit
 
  173
IDMA28745
MakeOKK,Japan
ModelBT50
YOM1999
ConditionGood Condition
PhotoSee Photo
F-18iM
Rev: 8000 rpm
T:500Χ2APC
0.001° X 760 Y 730 Z 800
ATC-40
 
  174
IDMA28744
MakeHitachi
ModelHS500sp
YOM
ConditionGood Condition
PhotoSee Photo
∑18M
12000 rpm
HSK-NC585
X500 2APC
ATC-91
 
  175
IDMA28743
MakeHitachi
ModelHS500
YOM2000
ConditionGood Condition
PhotoSee Photo
T:500*500*2APC
total weight:500kg
S:680*680*680
BT40, 20000rpm(高速)
ATC-60
Control:Fanuc-16MA
 
  176
IDMA28742
MakeMitsui Seiki
ModelHU40A
YOM2001
ConditionGood Condition
PhotoSee Photo
ATC: 60,
BT40,
Pallet:400 x 400 x 2APC,
S:560 x 560 x 560 ,
20000 rpm,
B axis: 0.001 degree,
Control: Fanuc16iM
 
  177
IDMA28741
MakeMakino,Japan
ModelA55
YOM2001
ConditionGood Condition
PhotoSee Photo
Profesional-3 (F-16M),
T:400 x 400 x 2APC,
S:560 x 560 x 560,
20000 rpm,
HSK-A63,
ATC40.
 
  178
IDMA28740
MakeMakino,Japan
ModelA51C2
YOM2015
ConditionGood Condition
PhotoSee Photo
HSK-A63
ProfessionalI5
ATC 60,
400 Angle,
2 Pallet,
S: X 560
Y: 560,
Z:600,
20000 rpm.
 
  179
IDMA28637
MakeDoosan
ModelACE H100
YOM2007
ConditionGood Condition
PhotoSee Photo
X: 2000 mm,
Y: 1120 mm,
Z: 1000 mm,
Palett 1: 1000Χ1000 mm,
Palett 2: 1000Χ1000 mm,
Table: 1 degree,
Spindle RPM: 4500,
Spindle taper: ISO 50,
Control: Fanuc 18i-MB
ATC 60 positions.
Chip conveyor
 
  180
IDMA28442
MakeHuller Hille
ModelGenius500
YOM2004
ConditionGood Condition
PhotoSee Photo
X travel: 630 mm,
Y travel: 650 mm,
Z travel: 800 mm,
2 pallets: 630 x 500 mm,
Spindle motor: 29 kW,
Max. spindle speed: 16000 rpm,
Spindle torque; 85/134 Nm,
B axis: 0.001°,
ATC with 57 positions,
Control: Siemens Sinumerik 840 D
 
  181
IDMI6284
MakeMitsui Seiki
ModelHR6A
YOM1989
ConditionUnder power
PhotoSee Photo
X-travel : 2000 mm,
Y-travel : 1200 mm,
Z-travel : 860 mm,
Table clamping surface : 1000 x 1000 mm,
Type of pallet-changer 2 Way,
Table - indexing : 1°,
Tool magazin : 90 Places,
spindle taper : BT50,
spindle speed : 4500 rpm,
CNC Controller : Fanuc 11 MF,
distance spindle center to table : 150 - 1050 mm,
Distance Spindle nose to Table center : 200 - 1060 mm,
Table load capacity : 2000 kg,
Spindle head drive : 22 / 26 kW kW,
Max. torque on the spindle : 1068 Nm,
Spindle bearing diameter : 110 mm,
Rapid travel x/y/z : 12000 mm/min,
Feed : 0,1 - 4000 mm/min,
Feeds - fine adjustment : 0,001 mm,
Max. tool length : 400ma mm,
Max. tool diameter :125 mm,
Max. Tool Diameter,
when free side places in ATC : 220 mm,
Max. tool weight : 25 kg,
Tool changing time : 6,5 sec,
Measuring system Glas scale
Position tolarance in X/Y/Z axis,
with Glas scale : +/- 0,005 mm,
Repeat accuracy in X/Y/Z axis,
Glas Scale feedbac :+/- 0,0015 mm,
Total power requirement : 60 kva,
Weight of the machine ca. : 25 t,
Dimensions of the machine ca. : 5,10 x 4,50 x 4,20 m,
Fanuc 11M.
 
  182
IDMA28255
MakeHyundai
ModelSPT800
YOM2002
ConditionGood Condition
PhotoSee Photo
X axis : 1250 mm,
Y axis : 1000 mm,
Z axis : 850 mm,
Spindle taper : ISO 50,
Spindle speeds : 22 - 4500 rpm,
Dimensions of pallets : 800 x 800 mm,
Pallet load : 2200 kg,
Rapid feed X / Y / Z axis : 18000 mm,
Cutting feed X / Y / Z axis : 8000 mm,
Dimensions : 3270 x 5510 x 3183 mm,
Weight of the machine : 20000 kg.
CNC Fanuc 18 M.
2 Pallets.
 
  183
IDMI6268
MakeMakino,Japan
ModelMC86
YOM1999
ConditionGood Condition
PhotoSee Photo
Table size: 630 x 630 mm,
Control: Fanuc 15 M,
All AC servo drive for X,Y,Z,B spindle, ATC and ATC cartidge up, down,
Taper: BT50,
No. of tools in ATC: 99 Nos,
with spindle through
Coolent
Accessories: Coolant tank,chip convayor
Hydraulic power pack,oil chiller unit,
Screw convayor,step down,
Transformer Panel AC,Full encloser.
 
  184
IDMA28217
MakeMori Seiki
ModelSH630
YOM1997
ConditionGood Condition
PhotoSee Photo
Pallet size : 630 x 630 mm,
x travel : 840 mm,
y travel : 760 mm,
z travel : 840 mm,
ISO 50 spindle taper,
Speeds to 10,000 rpm,
60 tool ATC,
3 axis plus 1 deg indexing,
Swarf conveyor,
Manuals,
Control : MSC-516.
 
  185
IDMI6205
MakeDahlih,Taiwan
ModelHMC500
YOM1997
ConditionGood Condition
PhotoSee Photo
Pallet dimension : 500 x 500 mm,
Min indexing angle : 1 Degree,
Max table load : 800 Kg,
Longitutinal travel x : 750 mm,
Vertical travel Y : 680 mm,
Cross travel Z : 600 mm,
Distance between spindle end & table centre : 160 ~ 760 mm,
Distance of spindle center to table surface : 50 ~ 730 mm,
Rapid traverse : 15 m/min,
Cutting traverse : 1-5000 mm/min,
Minimum input increment : 0.001 mm,
Spindle speed : 20-3500 RPM,
Spindle nose : BT 50,
Spindle speed range : Infinitely variable,
Tool stroage capacity : 60 tool ATC,
Maximum tool dia : Dia 110 mm,
Maximum tool length : 400 mm,
Maximum tool weight : 20 kg,
Tool selection Random,
Spindle motor Fanuc model 15S 18.5 K,
CNC system Fanuc OMC control.
Machine Accuracies :-
Positioing accuracy : +/-0.003 \ 400 mm Dist,
Repeatablity : +/- 0.0025 mm,
Milling capacity : 450 cc/min, (steel),
Drilling capacity in dia : 65 mm (steel),
Tapping capacity in dia : M52 x 5P (steel),
Min indexing angle of B axis : 1 Degree (3 min accuracy),
 
  186
IDMI6195
MakeDMG
ModelDMC50H
YOM2001
ConditionWorking
PhotoSee Photo
Axis X : 550 mm,
Axis Y : 450 mm,
Axis Z : 450 mm,
Table size : 400 x 400 mm,
With 40 tool magazine.
 
  187
IDMA27686
MakeMazak,Japan
ModelFH6800
YOM02/2000
ConditionGood Condition
PhotoSee Photo
Pallet Size: 630 x 630 mm,
Max. Diameter: 1.050 mm,
Max height:. 1,000 mm,
Table load: max. 1500 kg,
Swivel range: 360 x 1 °
Swing speed: 2.5 sec / 90 °
Table height from floor: 1300 mm,
X axis: 1050 mm,
Y-axis: 800 mm,
Z axis: 880 mm,
Rapid traverse
X, Y, Z-axis: 40 m / min,
Feed: 1- 40000 mm / min,
Work spindle
Speed range: 35 to 7000 min-1,
Torque: max. 1176 Nm,
Drive power
15 minutes. Power Rating: 30 kW,
100% continuous operation: 22 kW,
Number of tool stations: 40 Tools ,
Steep taper CAT 50 (DIN 69871),
Tool diameter: max. 135 mm,
With free Nebenplaetzen: max. 260 mm,
Tool length from spindle nose: max. 500 mm,
Tool weight: max. 30 kg,
Tool change time chip-to-chip: max. 5 s,
Werkzeugkippmoment: max. 29.4 Nm,
Coolantsystem:
Fuel capacity: 900 l,
Flood cooling: jets at spindle head ,
Coolant through spindle:
Foerderleistung: about 30 l / min,
Pressure at the pump: 5.5 bar,
Pump: 730 W,
1 ° x 360 positions indexing table,
2-pallet changer,
Safety cover for 2-pallet changer,
Chain magazine for 40 tools,
Tool lengths measuring device,
complete Coolant system,
Flutkuehlung by jets at spindle head,
much SK 50 tool,
Control: Mazatrol PC Fusion 640M CNC.
 
  188
IDMA27682
MakeKuraki,Japan
ModelKH80
YOM1991
ConditionGood condition,under power
PhotoSee Photo
X travel: 1.100 mm,
Y travel: 800 mm,
Z travel: 750 mm,
B : 360 x 1 °,
2 pallets 800 x 800 mm (pallets changer),
Spindle speed: 30-4.500 rpm,
SK50 tool holder,
Internal coolant supply,
Tool magazine 40 seats,
20 tool holders,
Machine weight approx.: 20 tons,
Control: Fanuc 15M
 
  189
IDMA27575
MakeScharmann
ModelEcocut2
YOM1985
ConditionGood Condition
PhotoSee Photo
Pallet size: 1250 x 1450 mm,
Pallet capacity: 6000 kgs,
No of pallets: 2,
X axis: 1600 mm,
Y axis: 1600 mm,
Z axis: 1500 mm,
W axis: 600 mm,
Guideways: Roller guide,
Axis speed X: 6000 mm/min,
Axes speed Y,Z: 6000 mm/min,
Spindle power: 22 kW,
Spindle speed: 3000 rpm,
Spindle diameter: 130 mm,
Spindle taper: SK50,
Automatic tool changer
Chain magazine: 44 tools ISO50,
No of controlled axes: 5,
Control: Bosch CC3000M,
With pallet changer.
 
  190
IDMA27572
MakeDoerries Scharmann
ModelEcocut2
YOM2000
ConditionGood Condition
PhotoSee Photo
X-travel: 2.000 mm,
Y: travel 1.600 mm,
Z travel: 1.500 mm,
Main spindle:
Turning speed range - main spindle: 12 - 3.000 min/-1,
Power capacity - main spindel: 55 kW,
Max. Torque: 4.600 Nm,
Transmission ratio: 3
Spindle bearing diameter: 280 mm
Spindle diameter: 150 mm
W-axis: 700 mm,
Tool taper: SK 50,
work table:
Table surface area: 1.600 x 2.000 mm,
Max. table load: 25.000 kg,
Number of T-slots: 9
T-slot - width: 28 H7 mm,
T-slot - distance: 160 mm,
Table height over floor: 1.050 mm,
Numbers of pallets: 2 (3),
B-axis (table): 0,0001 °
Change time of pallets: 15 sec
Tool-Presetter:
Tooling 40 pos.
Max. tool weight: 30 kg,
Max. tool length: 700 mm,
Max. tool diameter: 125 (300) mm,
feeds:
Feed speeds X / Y / Z: 12.000 mm/min,
Feed speeds W: 6.000 mm/min,
Feed speeds B: 2,4 min/-1,
Feed force X / Y / Z: 40 kN
Measuring system X / Y / Z / B: direct,
Measuring system W: indirect,
Total power requirement: 128 kVA,
Weight of the machine ca.: 48 t,
Dimensions of the machine ca.: 10,0 x 9,0 x 5,0 m,
Documents
Chip conveyor
Tool Magazine 40 pos.
Coolant system
Hydraulic system
Elektr. hand wheel
Pallet changer
Tool Monitoring
Control Sinumerik 840 D Siemens
 
  191
IDMA27354
MakeMazak,Japan
ModelH630
YOM1989
ConditionGood Condition
PhotoSee Photo
Total machine power : 59,4 kVA,
Spindle motor : 22/15 kW,
Spindle speed : 4500 min,
Travel X : 1000 mm,
Travel Y : 800 mm,
Travel Z : 750 mm,
Distance spindle nose / table : 200-950 mm,
Pallet size : 630 x 630 mm,
Permissible load : 1200 kg,
No of tools : 80 ATC,
Tool change time : 11 s,
Pressures : 30 bars,
Total Weight : 17000 kg.
Control CNC MAZATROL M-32.
 
  192
IDMA27349
MakeScharmann
ModelSolon1
YOM1988
ConditionGood Condition
PhotoSee Photo
X-travel: 1250 mm,
Y-travel: 1000 mm,
Z-travel: 800 mm,
Table-size: 800 x 650 mm,
Spindle taper: ISO 50,
Spindle diameter: 130 mm,
Tool change unit: 60 Werkzeugplδtze,
Table load : 2000 kg,
14 - 3500 U/min
Spindle drive: 20,0 kW,
1 - 6000 mm/min,
Rapid travel x/y/z: 12000 mm/min.
 
  193
IDMA26985
MakeScharmann
ModelSolon1
YOM
ConditionGood Condition
PhotoSee Photo
Travels :-
X -- Axes : Table cross travel : 800 mm,
Y -- Axes : Headstock vertical travel : 650 mm,
Z -- Axes : Column longitudinal travel : 650 mm,
B -- Axes : Angular of table : 360° (1° steps),
Spindle speed : 20-6000 rpm,
1- 15.000 mm/min,
With pallet Changer,
Pallets : 500 x 630 mm,
Pallet load capacity : 800 kg,
Automatic tool changer,
Tool magazine positions : 40,
Tool diameter without free positions max : 125 mm,
Tool diameter with 2 free positions max : 300 mm,
Control SIEMENS SINUMERIK 850 M,
4 axes,
ISO 50.
 
  194
IDMA26957
MakeHitachi Seiki,Japan
ModelHC400
YOM1989
ConditionGood Condition
PhotoSee Photo
Pallet Size : 400 x 400 mm,
5 Degree Indexing,
X Axis Traverse : 500 mm,
Y Axis Traverse : 460 mm,
Z Axis Traverse : 460 mm,
Spindle Size : BT40
Spindle Speeds : 60 – 6000 RPM,
50 Auto Tool Changer,
With Swarf Conveyor,
Control : Fanuc 11M.
 
  195
IDMA26941
MakeHuller Hille
ModelBluestar5
YOM2004
ConditionGood Condition
PhotoSee Photo
No of axis : 3+1,
Travel in X : 700 mm,
Travel in Y/Z : 630/700 mm,
Rapid traverse in X/Y/Z : 50/50/50 m/min,
Table-/pallet size (L x W or Ψ) : 500 x 500 mm,
No. of pallets : 2 Stk,
Resolution, NC-table : 360 x 1°,
Tool reception, main spindle : SK 40,
Main spindle power,
at 100/40% usage : 18 kW,
Revolutions, main spindle : 10000 1/min,
Torque, main spindle,
at 100/40% usage :- 202 Nm
No. of tools in tool changer : 40,
Pressure, inner cooling/other : 40 bar,
Equipment :-
machine housing (full), Lamp (in working area), high pressure pump,
coolant unit (paperband filter), coolant flush gun, coolant supply (inner
cooling), modem for remote service, pallet changer, rotary table (indexing),
rotary window, software option (shopmill), setup table (rotary), swarf
conveyor, tool changer, pallet/-s.
Control : Siemens 840 D CNC.
 
  196
IDMA26937
MakeMazak,Japan
ModelFH480
YOM1996/1997
ConditionGood Condition
PhotoSee Photo
Table longitudinal travel x axis : 560 mm,
Spindle vertical travel y axis : 560 mm,
Spindle cross wise travel z axis : 510 mm,
Pallet size : 400 x 400 mm,
Distance from the center of spindle to the top surface of pallet : 50 to 610 mm,
Distance from the spindle nose to the center of pallet : 150 to 660 mm,
Spindle drive motor : 11 kw,
Spindle nose type : ISO 40,
Spindle speeds : 35 to 12000 min,
Maximum load on pallet : 400 kgf,
Rapid travers X/Y/Z : 32000 mm,
With 60 ATC,
Weight of the machine : 9260 kg,
Overall machine height (from the bottom of the base) : 2609 mm,
Floor space requirements (W x D) : 3090 x 3837 mm,
Quantity : 2 nos.
 
  197
IDMI6052
MakeMazak,Japan
ModelH25N
YOM
ConditionGood Condition
PhotoSee Photo
800 mm,
Twin pallets of 800 mm ,
1 degree indexing,
Table Load : 1500 Kg,
X /Y/Z movements : 1100/ 1070 / 1050 mm,
Spindale thru Coolant,
80 ATC,
Taper Cat 50,
Motor : 25 HP,
Speed 22-4000 RPM,
Mazatrol CAM M 2,
Swarf screw and conveyor.
 
  198
IDMA26933
MakeWMW Heckert ,Germany
ModelCWK630
YOM1998
ConditionExcellent condition,under power
PhotoSee Photo
X travel : 1000 mm,
Y travel : 750 mm,
Z travel : 850 mm,
Tool taper : SK50,
Pallet size : 630 x 630 mm,
Table indexing : 360 x 0.001 deg,
IKZ (Internal cooling system,
Spindle speeds range max : 6000 U/min,
ATC tool changer : 60 pos,
Control : Siemens 840 C.
 
  199
IDMA26656
MakeDaewoo
ModelHM800
YOM2005
Conditionexcellent working condition
PhotoSee Photo
Travels :
X : 1250 mm,
Y : 1000 mm,
Z : 1000 mm,
Max. spindle speed : 6000 RPM,
Spindle motor power : 22/26 KW,
Table size : 800 x 800 mm,
Tooling taper : BT50,
Index table : 1 DEG/B axis,
Coolant through spindle ,
ATC : 60 Stations,
Chip conveyor,
Control : Vision 380
 
  200
IDMA25170
MakeMazak,Japan
ModelH400
YOM
ConditionGood Condition
PhotoSee Photo
Table longitudinal travel (X-axes) : 560 mm,
Cross-travel head (Y-axes) : 460 mm,
Height- travel head (Z-axes) : 510 mm,
Table dimensions : 2x 400 x 400 mm,
Admission in spindle (ISO): SA 40,
Control (type) : Mazatrol M 32,
Toolstore : 30 ATC,
Frequency (from X tot Y rpm) max 7000 rpm,
Number of pallets ( X of Lo x La) 2 / 400 x 400,
Length L -- R : 3500 mm,
Depth Fw -- Bw : 2600 mm,
Height : 2200 mm,
Weight : 6900 kg,
Cooling-system 1.
 
  201
IDMI5750
MakeDaewoo
ModelACEH80
YOM1996
ConditionGood Condition
PhotoSee Photo
x-travel 1250 mm,
y-travel 1000 mm,
z-travel 1000 mm,
Number of pallets 2 way,
size of pallet 800 x 800 mm,
feeds 5000 mm/min,
rapid traverse 15000 mm/min,
spindle taper BT 50,
spindle motor 15 / 18,5 kW,
spindle turning speed range 20 - 4500 U/min,
Tool magazine positions 90 fach,
tool diameter 135 mm,
wotkpiece diameter with 2 vacant positions 250 mm,
tool length - max. 550 mm,
weight of tools max. 25 kg.,
tool changing time 2,5 sec,
distance spindle center to table 75 - 1075 mm,
Distance Spindle nose to Table center 200 - 1200,
table load capacity 2000 kp,
table - indexing 1°,
Control Fanuc OM,
total power requirement 63 kVA,
weight of the machine ca. 20000 t,
dimensions of the machine ca. 7060 x 4190 mm.
Additional information :
Fanuc OM; Pallet 800x800,
- With Chip conveyor
- With band filter

 
  202
IDMI5696
MakeHitachi Seiki,Japan
ModelHG-500
YOM1990
ConditionDismantled,Good condition
PhotoSee Photo
X Axis Travel:710 mm, Y Axis Travel:680 mm, Z Axis Travel:600 mm,
Tool Stations:60, Spindle Taper:BT 50, Fanuc 11M (AC Servo) CNC control
 
  203
IDMI5695
MakeEngland
ModelFMT 100
YOM1995
ConditionVery good condition
PhotoSee Photo
Pallet size : 500 x 500 mm,
Full 1 degree B axis,
60 toll ATC ,
Taper : 50 ISO,
Siemens 802 D SL brand new control ( incl. drives and motors for all four axis with geared spindlw) with new electrical panel,
X travel : 750 mm,
Y travel : 650 mm,
Z travel : 500 mm .
 
  204
IDMA23654
MakeMaho
ModelMC5HS
YOM1983
ConditionGood Condition
PhotoSee Photo
Travel X axis : 500 mm,
Travel Y axis : 400 mm,
Travel Z axis : 400 mm,
SK : 40,
Control MAHO CNC 432.
 
  205
IDMI5625
MakeMatsura
ModelMC600H/45
YOM
ConditionGood Condition
PhotoSee Photo
4 Axis with Full B-Axis
X is 600mm
Y is 450mm.
Z is 480mm
50 ATC
BT40
11 Kw Spindle Power
30-6000 RPM.
Pallets 450mm X 450mm.
Fanuc 11M.
Ex- Aerospace
 
  206
IDMI5617
MakeHitachi
ModelHC500
YOM
ConditionGood Condition
PhotoSee Photo
500 x500mm X 10 PALLETS ,
XYZ Movements: 710 x630 x560mm,
20-4000RPM,
240 ATC,
BT/CAT 50,
1 degree rotation,
FANUC 11M CNC, ( One Machines ).
FANUC 11M CNC, ( One Machines ).
Thru Spindle coolant.
According to Machine Supplier Accuracy of the Machine is within 20 Microns.
 
  207
IDMI5581
MakeCincinnati Machines
Model
YOM1988
ConditionWorking
PhotoSee Photo
X- 750 mm, Y-425 mm, Z- 400 mm, Control-Siemens 810 GA3, 20 tools, Pallet Changer, 500x2 Palllet
 
  208
IDMA22293
MakeMakino,Japan
ModelMC 86-A120
YOM
ConditionGood Condition
PhotoSee Photo
630 x 630 mm pallet size,
X 860 mm, Y 635 mm, Z 635 mm,
ATC 60,
AC Servo,
1 set.
 
  209
IDMA22149
MakeBurkhardt&Webber
ModelMC60
YOM1992
ConditionGood Condition
PhotoSee Photo
X-travel : 800 mm,
Y-travel : 630 mm,
Z-travel : 630 mm,
Pallet changer type : 2 pallets,
Pallet size : 630 x 630 mm,
Toolchanger : 173 tools,
Speeds : 6000 tpm,
Table load : 1000 KG,
CONTROL :SIEMENS 850M / 880M.
 
  210
IDMA22111
MakeMazak,Japan
ModelV15N
YOM
ConditionVery good condition
PhotoSee Photo
Double table 1740 x 600,
Strokes 1520 x 550,
Implements autimatic feeding 40 tools,
CNC MAZATROL CAM M2.
 
  211
IDMA21775
MakeChinese
ModelTW630
YOM
ConditionBrand New
PhotoSee Photo
NC Control System: FANUC OI-MD, Travel: X/Y/Z: 800/580/600mm, Table Size: 630x630 (0.001 Degree Index), Max. Table Weight: 500kg, Spindle: SK50, Direct Drive (6,000 RPM), Spindle Driver: 22/26kw (Alpha SerieS), Guideways X/Y/Z- Roller Type Linear Guideway, Rapid Travel X/Y/Z:30/30/24M/min, Axis Motor: 4.0/4.0/4.0BS (Alpha Series), SK50 Arm Type-24 Tool Changer,Spindle AIr Blast, Chain Type Chip Conveyor, Full Splash Guard, Tosoku Hand Wheel, Coolant System, Heat Exchanger for Cabinet, Work Lamp & 3 Color Alarm Lamp, Complete Telescoping cover, Auto Lubrication System, Leveling Bolts and Leveling Blocks, Tools & Tool Box, Operation Manual
 
  212
IDMI5486
MakeToyoda,Japan
Model
YOM2002
ConditionGood Condition
PhotoSee Photo
Pallet Size - 400*400mm, Travel - 600*500*500mm, RPM - 14,000, ATC -60 Tools, Rotary - 1 degree indexing, Rapid - 50mts/min, Cutting Feed - 50mts/min, Control - Fanuc 16iM, Machine equipped with Tooling, Renishaw Probe and with Through Spindle Coolant.
 
  213
IDMI5476
MakeToyoda,Japan
Model
YOM2002
ConditionGood Condition
PhotoSee Photo
Pallet Size - 400*400mm.
Travel - 600*500*500mm.
RPM - 14,000.
ATC - 60 Tools.
Rotary - 1 degree indexing.
Rapid - 50mts/min.
Cutting Feed - 50mts/min.
Control - Fanuc 16iM.
Machine equipped with Tooling, Renishaw Probe and with Through Spindle Coolant.
 
  214
IDMI5475
MakeMorris Seiki
Model
YOM
ConditionGood Condition
PhotoSee Photo
Pallet Size 1400 x 1400 mm, With Fanuc 11M.
 
  215
IDMA21211
MakeMakino,Japan
ModelA55
YOM1992
ConditionDismantled
PhotoSee Photo
Travels: X- 560, Y-560 Z-560, Pallets- 400x400 mm, 2 pallets, Cnc control- FANUC 16M, ATC 120 pos/Taper-SK40, 30 bar internal cooling system, About 40-50 pieces toolsholders.
 
  216
IDMA21094
MakeWMW Union ,Germany
ModelCBFK90-1CNC
YOM1987
ConditionGood condition,under power
PhotoSee Photo
Pallet Size : 1000 x 1000 mm (2 nos), X travel : 1600 mm, Y travel : 1200 mm, Z travel : 1100 mm, Spindle taper : ISO 50, Spindle Speed : 10 - 4000 RPM, Spindle power : 36 kW, X,Y,Z Feeds : 12000 mm/min, Spindle dia : 280 mm, 60 Tool changers, B Axis : 360 degrees, Spindle throught coolant, Fanuc 6M-B CNC Control, Chip conveyor, Horizontal indexing table for 4th axis, With complete documents.
 
  217
IDMA20942
MakeFritz Werner
ModelTc630
YOM1986 & 1988
ConditionGood Condition
PhotoSee Photo
1.Pallet sizeL 630x630, ISO50, Travels, X:800, Y:630, Z:710mm, CNC Siemens Sinumerik 8, 40 fold tool changer and 2fold pallet changer, coolant through spindle, acc:ca, 50 tool holfrts, chip conveyor
2. Pallet size: 630x630, ISO50, Travels, X:800,Y:630, Z:710mm, CNC Siemens Sinumerik 8, 40 fold tool changer and 2 fold pallet changers, coolant through spindle, acc:chip conveyor
 
  218
IDMA20697
MakeExcello
ModelXB530
YOM1990 rebuilt 2000
ConditionReconditioned
PhotoSee Photo
Twin pallet changer 800 x 1000 mm, X 1600 mm, Y 1000 mm,Z 1000 mm,
Spindle speed 4000 rpm,
80 ATC, tool shank 50,
Rotary table,
Touch probe,
Coolant through the spindle,
Switchboard cooling ,
Paper filter,

with Siemens CNC 840 D.

 
  219
IDMA20676
MakeOMZ
ModelM300
YOM1993
ConditionGood Condition
PhotoSee Photo
Pallet size 400 x 400 mm ,
X/Y/Z 500/365/240 mm ,
Spindle attachment ISO40 ,
Spindle speed 40-4000 rpm. (2 levels) ,
Tools 24 tools ,
Motorpower 5,5/7,5 KW ,
Accessoiries:
4th axis (rotary table)
1 Pallet changer
1 Coolant system
1 Toolholder ISO40
Instruction manual

Controlling system: FANUC, Typ: O-M
 
  220
IDMA20671
MakeMakino,Japan
ModelMC98
YOM1995
ConditionVery good condition
PhotoSee Photo
table size 620 x 620 mm, X 900 mm, Y 797.5 mm, Z 737.5 mm, Contouring 4th Axis Pallets, 50 ATC, 15000 RPM, BT 50, 25 HP, Large Tooling Package , Makino Pro 3 CNC (Fanuc 16M).
 
  221
IDMA20669
MakeMakino,Japan
ModelA66
YOM2001
ConditionVery good condition
PhotoSee Photo
table size 492.5 x 492.5 mm, X 787.5 mm, Y 690 mm, Z 630 mm, Square Pallets w/ 1 Degree Indexing, 40 ATC, 14000 RPM, CAT 40, Thru Spindle Coolant, 1575 IPM, Hydraulic Fixture Clamping, Makino Pro 3 CNC (Fanuc 16M)- 3 machines
 
  222
IDMA20668
MakeMakino,Japan
ModelA55E
YOM2001
ConditionVery good condition
PhotoSee Photo
table size 392.5 x 392.5 mm, X 550 mm, Y 550 mm, Z 590 mm, Contouring 4th Axis Pallets, 40 ATC, 14000 RPM, CAT 40, Thru Spindle Coolant, 3307 IPM, Hydraulic Thru Fixture Clamping,Makino Pro 3 CNC (Fanuc 16M)
 
  223
IDMA20639
MakeMazak,Japan
ModelVariaxis730-5XII
YOM2009
ConditionGood Condition
PhotoSee Photo
Dia. : 630 mm x 500 mm,
X= 730 mm, Y= 850 mm, Z= 560 mm,
ATC 40.
 
  224
IDMA20533
MakeGrob
ModelBZ500
YOM2000 / 1998
ConditionVery good condition
PhotoSee Photo
Pallet Size 500 x 500 mm,
X 630 mm,
Y 630 mm,
Z 500 mm,
40 Auto Tool Changer.
Spindle 63 HSKA
Spindle Speeds to 15000 RPM
Swarf Conveyor
Seimens 840M CNC Controls.
- 2 machines
 
  225
IDMA20333
MakeYasuda
ModelYBM85
YOM1992
ConditionGood Condition
PhotoSee Photo
F-15M, Table- 700x600mm-2P, 12000rpm, Loading 400kg,
 
  226
IDMA20327
MakeMitsubishi
ModelMH60C
YOM1990
ConditionGood Condition
PhotoSee Photo
FANUC-15M,Table:630mmx630mm, Loading 1500kg, X:1050mm, Y:890mm, Z:890mm
 
  227
IDMA20201
MakeWahli
ModelW 51
YOM1990
ConditionGood Condition
PhotoSee Photo
2 Paletts- 300 x 300 mm, X = 700 mm, Y = 350 mm, Z = 300 mm, CH, Suisse brand) – with PALLET CHANGER

 
  228
IDMA20171
MakeDeckel
ModelDZ4LS
YOM
ConditionGood working condition
PhotoSee Photo
X 630mm
Y 500mm
Z 630mm
Pallet Size 630 x 500 mm,
Number of pallet 8 Pallets,
80 tool magazine
50 tool holders extra
CNC Control Siemens Sinumerik 840C upgraded in 1998
 
  229
IDMA20162
MakeHuller Hille
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) Model : nb-h260, Year : 1986, X - 1400 mm, Y - 1000 mm, Z - 1000 mm , Recording: SK 50, Control: Siemens 850 M, Qty - 2 nos.
2) Model : nb-h210, Year - 1993, X = 1000 mm, Y = 800 mm, Z = 800 mm, Table Size 630 X 800 mm, Recording: SK 50.
 
  230
IDMA20133
MakeDeckel Maho ,Germany
ModelDMC60H
YOM2000
ConditionVery good condition
PhotoSee Photo
2 pallet rotating table 500 x 400 mm, travels 600 x 560 x 560 mm, table load 400 kg , spindle 6.000 RPM , turret station 40 pcs, CNC Siemens 840D
 
  231
IDMA20132
MakeDeckel Maho ,Germany
ModelMC800H
YOM1993
ConditionVery good condition
PhotoSee Photo
2 pallets , Travels 800 x 600 x 600 mm, 2 pallet rotating table , SK50 spindle with inner cooling 6.300 RPM , turret station 63 pcs, Maho TNC532.
 
  232
IDMA20131
MakeDeckel Maho ,Germany
ModelMH1600S
YOM1993
ConditionVery good condition
PhotoSee Photo
rotating table 1250 x 980 mm, travels : 1600 x 800 x 800 mm, table load 2 tons , SK50 spindle with 4000 RPM , turret 60 pcs , MAho TNC 532
 
  233
IDMA20086
MakeOkuma,Japan
ModelLB300-MY
YOM2000
ConditionGood Condition
PhotoSee Photo
Model- LB300M-C1000, Greates PAss round over bed- 530mm, Swing Diamter over face slide- 420mm, Turning Length-1000mm, Centre height- 210mm, Centre dis
 
  234
IDMA20085
MakeMori Seiki
ModelMH40
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc Series MSC 516
 
  235
IDMA20084
MakeMori Seiki
ModelMH40
YOM
ConditionGood Condition
PhotoSee Photo
CNC Control- FANUC Series MSC516
 
  236
IDMA20082
Make
ModelFA 1050
YOM2001
ConditionGood Condition
PhotoSee Photo
 
  237
IDMA19927
MakeMazak,Japan
ModelFH1080
YOM1998
ConditionGood Condition
PhotoSee Photo
X - 1640 mm, Y - 1300 mm, Z - 1220 mm, Rapid traverse rates - X & Y axis 24 m/min, Rapid traverse rates - Z axis 20 m/min, B axis 0.0001 °., Pallet size 1000 x 1000 mm, No. of pallets 2, Spindle speed 12,000 rpm, Spindle power - 30 kw, Tool storage capacity - 80, Through spindle coolant, Electrical power supply - 72,20 kva, Mazatrol M-Plus Control, Installed January 1999, EIA/ISO function, Mazacc 3D, New spindle installed April 2009, Well maintained with full service history.
 
  238
IDMA19926
MakeIngersoll
ModelHVM600A
YOM1998
ConditionGood Condition
PhotoSee Photo
Pallet Size - 620 x 620, X-Axis Travel, Working/Tool Change - 620/1013, Y - 620 mm, Z - 590 mm, 4th Axis - 360,000 DEG Feedrate, (All Axes) - 3000 IPM Tool Adaptor (Spindle Taper) - HSL 63A Spindle Speeds, Max - 10,000 RPM, Time To Max.Speed- 1.3 SEC Motor, Horsepower - 50 HP, Torque - 9850 mm, LBS Electric - System - 480/3/60 Weight, Approximately - 54000 LBS, EQUIPPED WITH:
Full 4th Axis, Fanuc 15M Controller, Load Station w/Pallet Changer, Alpha Series Linear Motor Drives, Hydrostatic Spindle, 60-Tool Automatic Tool Changer, Chip Separator & Conveyor, Thru-Spindle Coolant.
 
  239
IDMA19903
MakeHeller,German
ModelBea2
YOM1985
ConditionVery good condition
PhotoSee Photo
Control - uni-Pro NC 80-c, Number of pallets - 8 station pallet pool, Pallet size - 500 x 630 mm, Pallet load - 600 kg, Pallet change time - 18 sec, Table indexing - 1 degree, X - 800 mm, Y - 630 mm, Z - 630 mm, Feeds - X/Y/Z 1 - 10000 mm/min, Rapids - X/Y/Z 15000 mm/min, Spindle taper - ISO 50, Spindle bearing diameter - 100 mm, Spindle drive motor - 24 KW, Spindle speeds - 45 - 4000 rpm, Spindle torque - max. 750 Nm, Tool taper - DIN 69871A, Tool magazine positions - 120, Tool diameter with/without adjacent tools - max. 112 / 220 mm, Tool length - max. 400 mm, Tool weight - max. 25 kg, Tool-to-tool time - 3 - 5 sec, Chip-to-chip time - 8 sec, Machine weight - approx. 15000 kg, Machine dimensions - L x W x H -9800 x 5600 x 3600 mm , Equipped with: Chip conveyor; Coolant system; Coolant filtration system; 80 tool holders; Clamping equipment.
 
  240
IDMA19811
MakeHuron,France
Model
YOM1992
ConditionGood Condition
PhotoSee Photo
With NUM 760 CNC Control, 120 ATC,
Flood Coolant with filtration unit, 7 Pallets, pallet size
625 x 625 mm, Renishaw probing. 7000 hours.
 
  241
IDMA19800
MakeDoosan
ModelACE H100
YOM2007
ConditionGood Condition
PhotoSee Photo
Table - 1000 x 1000 x 2 pallets (load:3000kg), X - 2100, Y - 1250, Z - 1250 mm, Spindle taper - ISO#50, Max Speed - 6000 rpm, Spindle power - 26 kw, ATC:60EA, Coolant through spindle, chip conveyor
Controller - Fanuc18iM.
 
  242
IDMA19783
MakeHeller,German
ModelBEA07
YOM1986
ConditionGood Condition
PhotoSee Photo
X - 630, Y - 500, Z - 560 mm, Table - 400 x 400 mm, Taper - SK 40, Speeds - 45-6000 U/min, Pallet - 400 x 500 mm, Spindle Ψ in the front bearing - 70 mm, Tool magazin - 40 fach, Tool-Ψ/ - 150 mm, Length of tool - 300 mm, Weigth - 8000 kg.
 
  243
IDMA19754
MakeMori Seiki
ModelM300
YOM1986
ConditionGood Condition
PhotoSee Photo
X - 400 mm, Y - 400 mm, Z - 500 mm, Taper - SK40, Tool Magazin - 60 Fach, with 10 Pallets.
 
  244
IDMA19726
MakeHuller Hille
ModelNBH260-3
YOM1995
ConditionGood Condition
PhotoSee Photo
X= 1400 mm, Y= 1000 mm, Z=1000 mm,
NC-round table : 360°,
Table : 800 x 1000 mm,
Taper :SK 50,
Speeds/spindle power 25-5500 Upm/in27 kW,
Feeds 1-15000 m/min,
Table 2,5 t,
Tool magazin: 48 fach,
Max. tool Dia.- 100(270) mm,
Tool magazin : 168,
Tool length/tool weigtht : 450 mm/25 kg.
Control: SIEMENS 840 C.
 
  245
IDMA19494
MakeWIA
ModelKH63G
YOM2003
ConditionExcellent condition,under power
PhotoSee Photo
Pallet - 630 x 630 mm x 2 pallets (load:1000kg), X - 950, Y - 825, Z - 760 mm, Spindle taper - NT#50, Spindle - 20-4500 rpm, 22/18.5kw, 60ATC, Controller:Fanuc18iM, Chip conveyor, Working hours: 2600hrs
 
  246
IDMA19286
MakeBurkhardt&Webber
ModelMC120H
YOM1990
ConditionExcellent
PhotoSee Photo
Pallet size 1600 x 2300mm
X 2800mm
Y 1600mm
Z 1800mm
Quill stroke mm 400
B-axis Ψ 1500mm (360 x 1°)
max. table load 8000kg
SK 50 DIN 69871-A50
Spindle power 37kW (ED 100%)
Speeds 20 – 4000 1/min
Couple max. 3470 Nm (ED 100%)
Internal coolant 40 bar / 56 L/min
Rapid traverse X,Y,Z – axis 15m/min
Rapid traverse B – axis 4 1/min
Feed X,Y,Z-axis m/min 15
Feed X,Y- axis N 27.000
Feed Z- axis N 54.000
Tool magasin: 168 positions
max. weight tool 40 kg
with pallet change device
Pallet size 1600 x 2300mm
2 Pallets
Machine weight 50.000kg
Total power 120kW
Surface L x B x H 10.800 x 8.700 x 5.370mm
With :
· Renishaw measuring device
· Paper band filter
· Internal coolant through spindel
· Hydraulical clamping device
· Balluff tool identification
· broken tool control
· tool measuring device
· etc.
In 2007:
Complete new transmission for main spindle drive
New spindle for Z-axis
Retrofit B-axis

 
  247
IDMI5232
MakeMazak,Japan
ModelH10
YOM
ConditionGood condition,under power
PhotoSee Photo
X: 560 mm,
Y: 458 mm,
Z: 508 mm i index,
Control: Fanuc 6m,
Rapid: 15000,
Guideway: LM,
Pallet size: 450 x 450 mm,
ATC Magazine: 25 tools,
Tool: BT40,
Tool change speed: 2 sec.
 
  248
IDMI5229
MakeCincinnati,USA
ModelMilacron
YOM
ConditionGood condition,under power
PhotoSee Photo
X: 750 mm,
Y: 425 mm,
Z: 400 mm,
Control: Siemens 810 GA3,
Spindle RPM: 12000,
Power: 15 HP, Spindle motor,
Pallet: 2 Nos.,
Pallet size: Round table Dia. 500 mm.
ATC Magazine: 60 Tools.
Pallet changing time = 6 sec.
Spindle: Quill Movement.
Through coolant: Yes.
 
  249
IDMA19269
MakeMakino,Japan
ModelA55
YOM1997
ConditionGood Condition
PhotoSee Photo
table size 400 x 400 mm, X 560 mm, Y 560 mm, Z 560 mm, toolholder HSK63, with C drive, weight 9 tons, Controller Fanuc System 16MB - 4 machines
 
  250
IDMA19262
MakeDixi
Model350TPA
YOM1990
ConditionGood Condition
PhotoSee Photo
4 simultaneus axis, 2 Pallet System, Automatic Tool Changer (50 tools), Travels (x, y, z): 1000 mm, CNC Dixi 4400 CNC, 56 kw, Table CN 360.000 positions (B axis)
 
  251
IDMA19059
MakeDaewoo
ModelACE H400P
YOM1998
ConditionGood Condition
PhotoSee Photo
Pallet - 400x400, Distance from spindle nose to pallet centre 150-710 mm, Spindle taper ISO 40 (DIN 60871), Spindle motor (cont./30 min.) 18.5/22 kW, Spindle speed 60/12000 rpm, X - 600, Y - 560, Z - 60, Max. tool dimension (ΨxL)90/300 mm, Weight (approx.) 12000 Kg.
 
  252
IDMA18583
MakeMakino,Japan
ModelA55
YOM1991/1999
ConditionGood Condition
PhotoSee Photo
CNC Controler- PRO-3(FANUC-16Ma), Spindle speeds- 12~12,000rpm, Spindle Taper- (#40), Table- 400 x 400mm, Indexing- 0.001 degree(NC Rotary Table), Stroke- 560 x 560 x 560 mm, Spindle Motor- AC18.5/22KW, ATC- 120 Positions, APC- 2-Pallets, Floor Space- 2,430 x 3,490 x 2820 mm.
 
  253
IDMA18475
MakeMazak,Japan
ModelH500-50
YOM
Condition
PhotoSee Photo
Twin pallet changerg 500x500mm,travels X/Y/Z-710/650/650mm,with 80 ATC, tool shank 50,spindle speed 22-5000 rpm,tool measurement, coolant through the spindle bar,NC rotary table, with chip conveyor Mayfran with Mazatrol M 32 control.
 
  254
IDMA18474
MakeMazak,Japan
ModelH400N
YOM1982
Condition
PhotoSee Photo
Twin pallet changer 400 x 400mm,travelksX/Y/Z-560mm/510mm/510mmwith ATC tool hsnak 40CAT,spindle speed 35-10,000rpm,RIA/ISO programming, coolant through the spindle 8bar,monitoring system B, synchr tapping,NC rotary table, with Mazatrol M 32.
 
  255
IDMA18412
MakeOKK,Japan
ModelMCH800
YOM1997
ConditionGood Condition
PhotoSee Photo
Table 800 x 800 mm,
APC 2,
Table Index 1 deg,
ATC  80
 
  256
IDMA18385
MakeScharmann
ModelEcocut 1.3
YOM
ConditionGood Condition
PhotoSee Photo
spindle dia 125 mm, pallets 800 x 1000 mm(2 nos) , ATC 80 tools , spindle taper ISO50 , job weight on machine 3 tons ,4 axis machine , X 1600 mm, Y 1000/1300 mm, Z 1000 mm, main motor power 40kW, machine weight 20 tons. CNC Siemens Sinumerik 840D
 
  257
IDMA18210
MakeOkuma,Japan
ModelMX60HB
YOM1997
Condition
PhotoSee Photo
Table 630 x630mm,X-1000mm,Y-800mm,Z-810mm,spindle taper RT50, ATC 60,with CNC Control OSP-700M.
 
  258
IDMA18182
MakeToyoda,Japan
ModelFH80B
YOM1993
ConditionGood Condition
PhotoSee Photo
Control-F-15M, Table 800x800 mm, No. of Pallets-APC-6, Table Index-1 deg.
 
  259
IDMA18080
MakeMitsui Seiki
ModelHS3A
YOM1984
ConditionGood Condition
PhotoSee Photo
X 550 mm,
Y 500 mm,
Z 400 mm,
spindle drive 7,5 kW,
turning speed range - stepless 6000 1/min,
tool magazin: 60 BT 40,
rapid traverse 15 m/min,
feed range 0,1 - 4000 mm/min,
size of pallet 400 x 400 mm,
table load 500 kg,
Table Indexing 1 °,
total power requirement ca. 25 kVA,
weight of the machine ca. 10,5 t,
dimensions of the machine ca. 6,5 x 3,0 x 2,4 m,control Fanuc 11-M
 
  260
IDMA18079
MakeMitsui Seiki
ModelHR3C
YOM1986
ConditionGood Condition
PhotoSee Photo
pallet size 400 x 400 mm , X 550 mm,
Y 500 mm,
Z 400 mm,
spindle drive 7,5 kW,
turning speed range - stepless 6000 1/min,
tool magazin: 120 BT 40,
rapid traverse 12 m/min
feed range 0,1 - 4000 mm/min
table load 400 kg
Table Indexing 5 °
total power requirement ca. 40 kVA
weight of the machine 10,5 t
dimensions of the machine ca. 8,5 x 4,3x 2,4 m,control Fanuc 11-M
 
  261
IDMA18055
MakeSoraluce,Spain
Model
YOM1989
ConditionGood Condition
PhotoSee Photo
X-1250 mm, Y-1000 mm, Z-800 mm, 2 metal discs of 800x800 mm, Automatic shipper with store of 60 tools, Power-40 kW.
 
  262
IDMA17674
MakeMitsui Seiki
ModelHR6A
YOM
ConditionHydraulic and Electrics incomplete
PhotoSee Photo
pallet size 1250 x 1250 mm, X 2000 mm, Y 1500 mm, Z 1000 mm, distance from table surface to spindle axis 150-1000 mm, Max Permissible Load on Pallet3 tons , spindle taper CAT50 , spindle speed 120-12000 RPM , spindle motor AC29.4(40HP), rapid traverse X,Y 12000 mm/min , Z 12000 mm/min , tool storage capacity 60 tools, max tool weight 25 kgs , machine weight 32 tons , with 4th axis control and simultaneously 4th axis, Fanuc 15iMA CNC
 
  263
IDMA17651
MakeMazak,Japan
ModelH630
YOM1990
ConditionGood Condition
PhotoSee Photo
Pallet size 630 x 630 mm,
X 1000 mm, Y 800 mm, Z 750mm,
Toolchanger 120atc,
Max. spindle speed 5000rpm,
Spindle taper ISO50,
With 1° indexing,
Complete with NEW guideways X+Z
Control MAZATROL M32,with 6 pallet loading system - 2 machines
 
  264
IDMI5072
MakeHuller Hille
ModelNBH260
YOM1991
ConditionGood Condition
PhotoSee Photo
X-1400mm,Y-1000mm,Z-1000mm,pallet size 800mmx1000mm,No. of pallets 4,with Sinumerik-850 contrl,spindle motor capacity-27kW.
 
  265
IDMA17493
MakeCsepel,Hungary
ModelYBM90
YOM1986-87
ConditionGood condition,under power
PhotoSee Photo
Pallet Size : 1250 x 1250 mm (2 Nos), X travel : 2000 mm, Y travel : 1200 mm, Z travel : 1000 mm, Spindle Motor : 15 kW, Feed Range : 13000 mm/min, Spindle Taper : SK 50, Spindle Speed : 40 - 3200 U/min, 60 Tool Changers, Max. tool size : 440 mm, Max. tool dia : 200 mm, Max. tool weight : 20 kg, Distance between main spindle & pallet surface : 15 - 470 mm, Sinumerik 8 CNC Control
 
  266
IDMA17484
MakeHuller Hille
ModelNBH260
YOMinstalled 1990
Conditionworking condition ,under power
PhotoSee Photo
table size 1000 x 800 mm,travels 1400 x 1000 x 1000 mm, taper SK 50 ,
160 tools,
25 - 4500 rpm,
feeds 10.000 mm/min,
rapid traverse 15 m/min,
accessories:

tool changer,
NC rotary table,
2-fold pallet change ,

with Siemens 850 CNC control
 
  267
IDMA17457
MakeHuller Hille
ModelNBHP150
YOM1995
ConditionGood Condition
PhotoSee Photo
X 800 mm, Y 630 mm , Z 800 mm
Palett load 800 kg
Spindle ISO 50
Tool taper DIN 69871
Spindle power 37 kw
Spindle speed 6500 rpm
Dimensions LxBxH 7,8 x 5,1 x 3,5 m
Weight 16000 kg
Renovated B-axes 06-03-23
Scale for Y-axes changed 03-09-29
Scale for X-axes changed 06-04-20
Hydraulic pump changed 08-01-10
 
  268
IDMA17411
MakeMazak,Japan
ModelH400
YOM1987
ConditionGood Condition
PhotoSee Photo
With 5-pallet changer (6 Pallets in total),
Pallet size: 400x400mm,
Tool changer: 120atc,
Spindle taper: CAT 40,
Pallet: 1° Indexing.
Control: MAZATROL M2.
 
  269
IDMA17340
MakeHuller Hille
ModelNBH90
YOM1991 & 1995
ConditionGood Condition
PhotoSee Photo
Working range :
X axis = 630 mm
Y axis = 500 mm
Z axis = 580 mm
Pallet:
Palet Size - 400 x 500 mm,
Admissible load per pallet - 600 kg,
Working Spindle :
Max Speed - 8000 rpm,
Tool Taper - DIN69871 A40,
Power 60% duty -13 kw,
Torque 60% duty - 470 Nm,
Rapid traverse :
X-Y-Z -30 m/min.,
B axis - 22 m/min.,
Feed :
X-Y-Z - 30 m/min.
Feed Force X-Y-Z 100% - 7500 Nm.
Feed Force X-Y-Z 25%- 15000 Nm
 Tool Magazine
Tool locations - 123
Tool diameter - 70 mm
Max Tool diameter- 170 mm
Tool length - 320 mm
Tool weight - 20 kg
Chip to chip time - 8 seg.
Tool change - 3 seconds.
Control :Sinumerik 880M
Coolant equipment :
Tank contents - 700 l.
Pump Capacity - 30 l/min to 10 bar.
Chip conveyor Included.
Machine installation :
Weight - 10000kg.
Dimension - 4,4 x 4,9 x 3,2 m.
Qty: 3 Nos.

 
  270
IDMA17271
MakeMazak,Japan
ModelHCN6000-2
YOM2008
ConditionGood Condition
PhotoSee Photo
Pallet size:500 x 500 mm,
APC: 2,
Tooling:ATC43,
Taper: BT50,
Controller: Mazatrol Matrix Nexus.
 
  271
IDMA17189
MakeKitamura
ModelH400
YOM1991
ConditionGood Condition
PhotoSee Photo
X-Axis Travel 610 mm,
Y-Axis Travel 508 mm,
Z-Axis Travel 508 mm,
Pallet Size x 2 : 399 mm x 399 mm X
Pallet Indexing .001 Degree,
Pallet Load Capacity 399 KG.
Table Surface to Spindle Center 50 mm-559 mm,
Spindle Speed, (2-Speed Gear Head)7000 RPM,
Spindle Taper CAT 40,
Spindle Drive Motor 15 KW0 KW AC,
Rapid Feedrate, X,Z Axes 20000 mm/min,
Rapid Feedrate, Y Axis 15999 mm/min,
Cutting Feedrate 0.04-9982 mm/min,
Tool Changer 100 ATC,
Max Tool Diameter x Length 95 mm x 351 mm,
Max Tool Diameter, Adjacent Empty 150 mm,
Max Tool Weight 560 mm,
Dimensions 3505 mm x4013mm x 3175 mm,
Approximate Weight 8507 KG.
Equipped With:
Fanuc 15M CNC Control w/ 356 mm CRT,
Twin 399 mm x 399 mm Pallets w/ Auto Pallet Changer,
100-Position Automatic Tool Changer, Top-Mounted,
Enomoto chip conveyor,
Flood Coolant,
Box Ways on All All Axes,
All Available Manuals.
 
  272
IDMA17167
MakeMazak Shibaura
ModelBMC1000
YOM1990
ConditionGood Condition
PhotoSee Photo
Table 1000 x 1000,
Pallet 2 pallets,
Control Tosnuc.
 
  273
IDMA17119
MakeMitsubishi
ModelMH60C
YOM1991
ConditionGood Condition
PhotoSee Photo
Control: MELDAS-330M,
Table : 630 x 630 mm,
RPM : 4000,
ATC : 60,
Pallets 2.
 
  274
IDMA17118
MakeOKK,Japan
ModelMCH630
YOM1988
ConditionGood Condition
PhotoSee Photo
Control: OKK-PNC,
Table : 630 x 630 mm,
Stroke : 1020 x 820 x 820 mm,
RPM : 4000,
Pallets 2.
 
  275
IDMA17117
MakeYasuda
ModelYBM90N100RPC
YOM1991
ConditionGood Condition
PhotoSee Photo
Control: F15MA,
Table : 1000 x 1000 mm,
Stroke : 1100 x 995 x 800 mm,
RPM : 3600,
ATC : 180,
Pallets 2.
 
  276
IDMA17116
MakeOkuma,Japan
ModelMC80H
YOM1990
ConditionGood Condition
PhotoSee Photo
Control: OSP-5020M,
Table : 800 x 800,
Stroke : 1100 x 995 x 800 mm,
RPM : 3600,
ATC : 70,
Pallets 2.
 
  277
IDMA17115
MakeMakino,Japan
ModelA77
YOM1995
ConditionGood Condition
PhotoSee Photo
Control: Pro 3,
Table : 500 x 500,
Stroke : 800 x 750 x 770,
RPM : 10,000,
ATC : 60,
Pallets 2.
 
  278
IDMA17019
MakeHitachi Seiki,Japan
ModelHC630
YOM1990
ConditionVery good condition,Under power
PhotoSee Photo
Table 630x630 mm x 2 pallets,
X 800 mm,Y 710 mm,Z 630 mm,
Spindle taper NT#50,
Spindle 3600 rpm,
ATC60 ea,chip conveyor
Controller Fanuc15M,
 
  279
IDMA17004
MakeYasda
Model90NT60
YOM1986
ConditionUnder power
PhotoSee Photo
Movings:
X=1000 mm,
Y=800 mm,
Z=800 mm,
2 Pallets: 1000 x 1000 mm,
Main Spindle cone : DIN69871-A50,
Control System : Fanuc M0.
 
  280
IDMA16974
MakeToyoda,Japan
ModelFH55
YOM1989/1990
ConditionExcellent ,unused
PhotoSee Photo
Pallet size 550x550mm,X-axis 714mm,Y-axis 714mm,Z-axis 560mm,64 auto tool changer,spindle taper BT50,spindle speeds to 5000RPM,1 degree indexing,with FANUC control.(Qty. 2 Nos.)
 
  281
IDMA16957
MakeKorradi
ModelMycenterH400
YOM1993
ConditionGood working condition
PhotoSee Photo
X-610mm,Y-460mm,Z-510mm,5 Axis,0-100 deg,360 deg,BT 40 toolholder,toolholder place 100,with Fanyc 15M cintrol,also with cheap conveyor.
 
  282
IDMA16954
MakeWIA
ModelKH80G
YOM2007
ConditionGood Condition
PhotoSee Photo
Table size:800x800mm x 2EA,
Table load:2200kg,
Stroke(xyz):1250x1000x850 mm,
Spindle taper:NT#50,
Spindle Speed:4500 rpm, 26/22kw,
ATC:40EA,
Controller: Fanuc18iMB,
Coolant through spindle, chip conveyor.
 
  283
IDMA16938
MakeWIA
ModelKH63G
YOM1997/2008
ConditionExcellent condition,under power
PhotoSee Photo
Table: 630x630mm x 2 pallets (load:1000kg),
Stroke (xyz):950x825x769mm,
Spindle taper: NT#50,
Spindle rpm:4500 rpm, 22/18.5kw,
ATC:40 ea,
Controller: Fanuc15M.
Coolant through spindle, chip conveyor.
 
  284
IDMA16937
MakeWIA
ModelKH63G
YOM2004
ConditionExcellent condition,under power
PhotoSee Photo
Table: 630x630mm x 2 pallets (load:1000kg),
Stroke (xyz):950x825x769mm,
Spindle taper: NT#50,
Spindle rpm:4500 rpm, 22/18.5kw,
ATC:60 ea,
Controller: Fanuc18iMB,
chip conveyor.
 
  285
IDMA16923
MakeLeblond Makino
ModelMC86A60
YOM1987
ConditionExcellent condition,under power
PhotoSee Photo
Pallets Single Pallet 620 x 620 mm 360,000 Pos., X 797.5 mm, Y 625 mm, 625 mm, Full Contouring
Tsudakoma Table Indexer
Rnck-301-Ri - 800 Mm........ Full Contouring(360,000 Positions),
Spindle Taper Cat 50,
Automatic Toolchanger 60 Positions,
Spindle Motor . 20/15 Hp,
Spindle Center To Table Top 97.5 to 722.5 mm, Spindle Nose To Pallet Center 197.5 to 820 mm,
Equipped With:

Spindle Chiller
Coolant Thru Spindle
Tooling Package
13,500 Hours On Machine,
Fanuc 11M CNC Control With CRT
 
  286
IDMA16886
MakeMazak,Japan
ModelH500/50
YOM1989
ConditionExcellent condition,under power
PhotoSee Photo
Travels:
X=710 mm,
Y=650 mm,
Z=650 mm,
Spindl motor 15HP,
Spindle Taper 50,
Spindle speeds 22-5000 RPM,
Automatic tool changer 40 Positions,
Pallet size 2-508x508 mm (1 degree indexing),
Rapid Traverse Rate 950 IPM,
Equipped With:
60 PSI Coolant Thru Spindle,
Rapid Tapping,
Auto Cut time 12,080 HRS,
total Cut Time 7,042 HRS,
Foot Print 2667x5004 mm.
 
  287
IDMA16823
MakeToshiba Japan
ModelBMC100E
YOM1994
ConditionGood Condition
PhotoSee Photo
Pallet size:1,000 x 1,000 mm,
APC: 2,
Table indexing: 1 deg.,
X-axis: 1,600 mm,
Y-axis: 1,250 mm,
Z-axis: 1,200 mm
Pallet top to spindle center line: 75 to 1,325 mm,
Pallet center line to spindle edge: 200 to 1,400 mm,
Spindle dia.: Ф100 mm,
Taper: BT50,
Speed: 5,000 rpm,
ATC: 90,
Controller: TOSNUC-800M,
Motor:18.5 kW,
Floor area (W x D x H):4,200 x 7,400 x 3,500 mm,
Weight:22,000 kg
 
  288
IDMA16753
MakeMazak,Japan
ModelH415
YOM1997
ConditionGood Condition
PhotoSee Photo
Travel: XYZ 560x560x510mm,
Pallet size: 400x400mm,
Table: 1° indexing,
Spindle Taper: BT40,
Max.Spindle speed:10 000rpm,
Toolchanger: 60atc.
Control: MAZATROL M32.
With through spindle coolant.
 
  289
IDMA16704
MakeRussian
ModelIR1250PF4
YOM1992
ConditionGood Condition
PhotoSee Photo
 
  290
IDMA16584
MakeMakino,Japan
ModelJ66
YOM2001
ConditionExcellent condition,almost new
PhotoSee Photo
X - Travel 500 mm,
Y - Travel 560 mm,
Z - Travel 500 mm,
Pallet size: 400x400 mm,
Pallet changer 2 way mm,
Spindle taper (HSK A-63) HSK A-63 mm,
No. of tools in magazin 32 mm,
Spindle speed range 50 - 16000 mm,
Spindle motor power 15 mm,
Table Indexing (NC) 1°,
Max. Table load capecity 400 kgs.
Control:Professional 3 Fanuc.
Qty: 2 Pcs.
 
  291
IDMA15846
MakeChinese
ModelMDH65
YOM
ConditionBrand New
PhotoSee Photo
pallet size 630 x 630 mm, X 1050 mm, Y 900 mm, Z 900 mm, motor power 18.5/22 kW , spindle speed 35-8000 RPM , taper ISO50 , tool storage capacity 40 tools, max tool weight 25 kg , rapid traverse (XY axis) 45m/min , Fanuc 18iMB.
 
  292
IDMI4941
MakeMazak,Japan
ModelH10
YOM1987
Conditioncan be inspected under power
PhotoSee Photo
Travels: 500 x 500 x 450 mm, Pallet Size: 450 x 425 mm, Spindle RPM: 3000, Adaptor: BT40, CNC System : Sinumeric 810D.
 
  293
IDMA10645
MakeChinese
ModelTH6580X80
YOM
ConditionBrand New
PhotoSee Photo
800 x 800 mm pallet size, no. of pallet changers double (6),X 1300 mm, Y 1000 mm, Z 1000 mm, change time 45, max. load on the table 2000 kg, spindle taper ISO 7:24 No 50,power of main drive motor 22/26(17/22.5)kW, spindle speed 20-5000 r/min., max. spindle torque 750/886(870/1150) Nm, max. spindle thrust 10000N, rotation of table 1 x 360, distance between spindel axis and table surface 0-1000 mm, min. distance between spindle nose and table center 247 mm, cutting feed: X,Y,Z, 1-10000 mm/min., rapid speed 24 m/min., magazine capacity/tool selection 60 piece (fixed point), max. tool dia when adjacent pocket empty 250 mm, X Y Z +0.008 mm, B(4x90 degree)+5degree (+2deg), XYZ +/- 0.005 mm, general electric capability 60(65) KVA, weight of machine 26.5 to 34 tons, Control: CNC Fanuc Oi-MC (Siemens 840D)
 
  294
IDMA4576
Make
ModelBEA4
YOM
Conditionnew
PhotoSee Photo
1100 x 1300mm pallet size, X 2000mm, Y 1500mm, Z 1800mm, Taper HKS 100, tool magazine 53 places, turing speed range 1-2500U/min, feed range 1-20,000mm/min, rapid traverse 20,000m/min, Siemens 840D CNC
top