Category : Milling Machines

Sub-Category : Milling Gantry CNC

Total Machines Found : 41

Select | Machine Details
 
  1
IDMA34841
MakeCorrea
ModelF40/35
YOM2003&2004
ConditionGood Condition
PhotoSee Photo
CNC HEIDENHAIN 530 1.200 x 2.500 x 3.500 mm
 
  2
IDMA34539
MakeCincinnati,USA
ModelMAG-U5
YOM2007
ConditionGood Condition
PhotoSee Photo
FEATURES:
SIEMENS SINUMERIK 840D CNC CONTROL
HIGH TORQUE VERTICAL MILLING HEAD
HIGH TORQUE RIGHT ANGLE HEAD WITH 1-DEGREE INDEXING
SCALES ON Y & Z AXIS
(2) 30-STATION AUTOMATIC TOOL CHANGERS
CAPACITY:
X-AXIS, LONGITUDINAL GANTRY TRAVEL:18000 MM
Y-AXIS, HEAD TRAVEL:3658 MM
Z-AXIS, RAM VERTICAL TRAVEL:1524 MM
DISTANCE BETWEEN COLUMNS:5055 MM
HEIGHT UNDER CROSS RAIL:2560 MM
VERTICAL HEAD TO WORK SURFACE:1671 MM
RIGHT ANGLE HEAD TO WORK SURFACE:1849 MM
DISTANCE ACROSS WAYS:5415 MM
LENGTH OF RAILS:21946 MM
WORK ZONES:2
SPECIFICATIONS:
RAM CROSS SECTION:508 MM X 508 MM
SPINDLE SPEEDS, VERTICAL HEAD:40-3000 RPM
SPINDLE SPEEDS, RIGHT ANGLE HEAD:20-3000 RPM
SPINDLE DRIVE MOTOR, HIGH TORQUE:52 KW
SPINDLE DRIVE MOTOR, S6-60:63 KW
HIGH RANGE TORQUE:442 FT LBS @ 187.5 RPM
LOW RANGE TORQUE:1770 FT LBS @ 187.5 RPM
S6-60:2348 FT LBS @ 187.5 RPM
SPINDLE TAPER:CAT 50
SPINDLE ROTATION:PROG. BI-DIRECTIONAL
SPEED STEPS:1 RPM INCREMENTS
AUTOMATIC SPEED SELECTION RANGES:3000 RPM
FEED RATES: X, Y AXES
15240 MM/MIN / 19990 MM/MIN
FEED RATES: Z-AXIS:12700 MM/MIN
FLOOR SPACE, MOVING WIDTH X LENGTH:7798 MM X 27084 MM
OVERALL HEIGHT:6386 MM
EQUIPPED WITH:
SIEMENS SINUMERIK 840D CNC CONTROL
(2) 30 POSITION ATC (FLOOR MOUNTED)
AUTOMATIC HEAD CHANGER
(2) HIGH TORQUE VERTICAL SPINDLE HEAD
HIGH TORQUE RIGHT ANGLE HEAD WITH 1-DEGREE INDEXING
SCALES ON Y & Z AXIS
THRU SPINDLE COOLANT
FLOOD COOLANT
2-STATION AUTOMATIC HEAD CHANGER
5-STATION TOOL RACK
RENISHAW RMP60 SPINDLE PROBE SYSTEM
COOLANT & CHIP CONVEYOR SYSTEM
 
  3
IDMA33950
MakeForest Line
ModelTA220VEGAMILL
YOM1981
ConditionGood Condition
PhotoSee Photo
Strokes: X / Y / Z / W / C / A: 2750 x 2900 x 1000 x 500 x 360 x + .- 45
Distance between upright: 2000
Height under spindle: 1050
Table diameter: 2x1800
Plate diameter: 1500
Max weight: 5000 kg
Slide width: 1100
Spindle speed: 2000 rpm
Spindle diameter: 110
Scabbard diameter: 210
Attachment cone: ISO 50
Spindle stroke: 500
NUM 760
 
  4
IDMA31984
MakeQuintax
ModelQ5H
YOM2009
ConditionGood Condition
PhotoSee Photo
2 tables Dim: 1830 x 3040 mm each
Races X = 4400 mm (longitudinal)
Y = 3800 mm (transverse)
Z = 1500 mm (vertical) (Limitation passage under gantry)
C = +/- 360
B = +/- 120
Spindle speed: up to 21,000 rpm
Tool attachment: HSK63F
Automatic feeder: 20 tools (More operational).
Liquid cooling spindle: Cooling unit supplied.
CNC: FAGOR 8070
 
  5
IDMA31717
MakeParpas
ModelOmnia-42
YOM2000
ConditionGood Condition
PhotoSee Photo
X axis- longitudinal: 1157.48 mm,
Y axis cross: 2500 mm,
Z axis vertical ram: 1245 mm,
Table dimensions: 1999 x 4999 mm,
Distance between columns: 3200 mm,
Feed rate max: 19990 mm/min,
Equipped with:
Selca 3045PD 5 axis CNC control,
Remote handwheel for CNC control,
2 axis positioning head, 5000 RPM # 50 taper,
2 axis contouring head, 16000 RPM, HSK taper,
Siemens drives,
New drives on X axis gantry,
Coolant
 
  6
IDMA30312
MakeDroop & Rein,German
ModelTF2500S40/15N
YOM1995
ConditionExcellent condition,under power
PhotoSee Photo
X = 5500 mm,
Y = 3400 mm,
Z = 1250 mm,
Working height : 1650 mm,
A/B = -/+ 95 Continous,
C = 360 Continous,
Spindle speeds : max. 6000 RPM,
Torque = 8000 Nm,
Spindle power / 40 kW,
Taper : ISO 50,
Passage width = 3000 mm,
Passage height = 2000 mm,
Table size : 2500 x 5000 mm,
Max. load : 25.000 Kg,
Feeds X, Y, Z = 10, 10, 10 m/min,
Rapid X, Y, Z = 15, 15, 10 m / min,
Total Machine weight incl. Accessories = approx. 80 - 85 tons.
Accessories :
1 x 2 Axis Millinghead Simultanous,
1 x Angulare Millinghead,
1 x Vertcal Millinghead,
Trollies for Millingheads.
 
  7
IDMI6591
MakeWaldrich,Germany
ModelHF4500
YOM1970
ConditionGood Condition
PhotoSee Photo
X axis stroke=12000mm,
Y axis stroke=7290mm,
Z axis stroke=1250mm,
W axis stroke=4380mm,
Distance between column 4500mm,
Max height under cross slide 4000mm without 5 axis head
Spindle taper=ISO60 (with 5 axis head BT-50)
Spindle power=55.1 KW,
Table capacity=125 T,
Table size=11000x4000 mm.
CNC 840C
 
  8
IDMA28803
MakeForest Line
ModelSeramill240
YOM
ConditionGood working condition
PhotoSee Photo
2.4m x 10m x 1.2m FANUC 18i
 
  9
IDMA28534
MakeForest
Model
YOM2000
ConditionGood Condition
PhotoSee Photo
WORKING RANGE MILLING :-
X-axis traverse : 6000 mm,
Y-axis traverse : 3000 mm,
Z-axis traverse : 1500 mm,
Number of controlled axes : 5,
PORTAL / BRIDGE :-
Distance between columns : 4000 mm,
FLOOR PLATE :-
Table surface (left-right) : 5000 mm,
Table surface (front-back) : 2500 mm,
Total weight approx : 60000 kg,
WORKING SPINDLE / HEAD :-
Spindle type orthogonal head,
Tilting range : 110 ,
Mode of operation automatic,
Positioning/indexing : 0.0001,
Tilting range (2nd axis) : 360,
Mode of operation automatic,
Positioning/indexing : 0.0001,
Spindle revolutions (min) : 372 /min,
Spindle revolutions (max) : 6000 /min,
Tool fixture ISO SK 50,
Drive power (max) : 35 kW,
Torque (max.) : 3000 Nm,
WORKING SPINDLE / HEAD :-
Spindle type orthogonal head.
Tilting range : 110,
Mode of operation automatic,
Positioning/indexing : 0.0001,
Tilting range (2nd axis) : 360,
Mode of operation automatic,
Spindle revolutions (max) : 15000 /min,
Tool fixture : HSK A63,
Drive power (max) (23.468 hp) : 17.5 kW,
AXIS DRIVES :-
Feed velocity (max) : 20000 mm/min,
Rapid traverse : 25000 mm/min,
ELECTRICAL SPECIFICATIONS :-
Mains power supply : 150 kVA,
DIMENSIONS / WEIGHTS :-
Space requirements length : 11000 mm,
Space requirements width : 7000 mm,
Total height : 6600 mm,
Total weight approx. : 98000 kg.
Chip conveyor.
Controls : CNC controls FIDIA.
 
  10
IDMA28467
MakeFour Star
ModelSD4209
YOM2009
ConditionGood Condition
PhotoSee Photo
X-travel : 8575 mm,
Y-travel : 4200 mm,
Z-travel : 1400 mm,
Working area : 9000 x 3400 mm,
Max. table load : 3000 kg,
Distance between columns : 4250 mm,
Passage height : 2020 mm,
Spindle speed : 5 - 5000 U/min,
Capacity : 30 / 37 kW,
Tool magazin : 40 Positionen,
Autom. head changer,
Elongation of the head : 500 mm,
Turning speeds : 4000 U/min,
Capacity : 26 kW,
A-axis : +/- 110,
C-axis : 360000,
Indexing : 2,5,
Total power requirement : 55 kW,
Overall size ca. 14,2 x 9,2 x 7,2 m,
Weight of the machine ca. : 72 t.
CNC 5-Axis Portal Milling Machine with FANUC Oi-MD control.
Max. table load: 3000 kg / meter.
 
  11
IDMA28364
MakeJobs
ModelJomach243
YOMNew in 1996
ConditionGood Condition
PhotoSee Photo
X/Y/Z: 4500/2700/1250 mm,
C axis,
A axis 190,
Head 4000 RPM + 15000 RPM - power 32 kW,
Tools ISO 50,
Tool changer 32 pos,
Weight of the machine: 42 ton,
Control: CNC fidia
 
  12
IDMA28260
MakeForest Line
Model
YOM2003
ConditionGood condition,under power
PhotoSee Photo
X-axis: 6.000 mm
Y-axis: 3.500 mm
Z axis: 1.500 mm
C axis: Contineous
A axis: +/- 110 degrees Contineous
X axis with Siemens linear drive
Table: 6000 x 2500 mm longitudinal grooves 28H7
2 axis milling head with electric spindle
Make Fisher with HSK 63
16,000 rev / min - 25 KW - 163 Nm
2. Replacement Spindle newly available
2 axis milling head with electric spindle
Make Fisher with HSK 63
30,000 rev / min - 22 KW - 25 Nm
Coolant system (KNOLL) and Coolant through the milling heads (outside) was prepared in accordance with 2012 Design.
Automatic tool change - 42 places HSK 63
Minimum quantity lubrication unit
2 longitudinal Conveyor,
Control:Siemens 840D
The machine is fully functional!
The following repairs were carried out in the last 4 years :
New covers, ball screws Y and Z,
and new balls and new bearings,
direct measurement systems in X, Y and Z,
and fitted with new seals.
 
  13
IDMA28159
MakeUnisign
ModelUPB150
YOM1989
ConditionGood condition,under power
PhotoSee Photo
X travel: 3000 mm,
Y travel: 1200 mm,
Z travel: 450 mm,
12 ATC,
Spindle taper: BT40,
With 40 tool holders,
Control: Philips CNC control.
 
  14
IDMA28148
MakeForest Line
ModelSeramill240
YOM1996
ConditionGood Condition
PhotoSee Photo
X axis: 6000 mm,
Y axis: 2500 mm,
Z axis (C axis to 0): 950 mm,
Table dimensions: 6000 x 2115 mm,
Passage between uprights: 2400 mm,
Spindle speed: 10-3200 U/min,
Tool for SK50,
With universal milling head + a axis C axis indexing 2.5
With chip conveyor,
With coolant system 35 bar,
With tool changer,
Control: Siemens 840 C.
 
  15
IDMA27122
MakeForest Line
ModelSeramill240
YOM2000
ConditionGood Condition
PhotoSee Photo
Travels X/Y/Z : 6000 x 2500 x 1000 mm,
Table : 6000 x 2000 mm,
Distance between columns : 2400 mm,
Distance spindle nose/table : 1200 mm,
Milling head:
Spindle ISo 50,
C axis : 180 deg,
A axis all : 2,5 deg,
Spindle speed : 10 to 6000 RpM,
Spindle motor : 29 kW,
With tool changer : 45 tools,
Control : Heidenhain TNC 426
 
  16
IDMA26954
MakeJobs
ModelLinX
YOM2003
ConditionGood Condition
PhotoSee Photo
X travel : 4200 mm,
Y travel : 3200 mm,
Z travel : 1250 mm,
Clamping plate : 5000 x 4000 x 350 mm,
Clamping table : 2500 x 1800 mm,
ATC : 16 fold tool changer,
Spindle taper : HSK - A63,
Spindle turning speeds - stepless : 250-22000 RPM,
2 axis milling head T2K-S : (C axis +-200 / A-axis -90/+100),
Spindle power : 40 kW,
Cooling throught the spindle (ICS),
Feeds : 50.000 mm/mm,
Calliper RENISHAW MP 18,
Machine weight : 46 tons,
Control : Fidia C20,
Spindle operating hours : 11000,
Spindle head/T2K -S head for complete mould & die machining and aerospace applications.
 
  17
IDMA26863
MakeCorrea
ModelPantera
YOM2003
ConditionGood Condition
PhotoSee Photo
Table size : 14,800 x 2500 mm,
X-Y-Z travel : 14000 x 3100 x 1200 mm,
Spindle speed : 3000 Upm,
Spindle motor : 35 kW,
Additional electric spindle : 18000 Upm,
Feed range / raid traverse : 30 m/min,
No. of hrs used : 22 h,
With 5 axis milling head,
Control : Siemens 840D.
 
  18
IDMA26833
MakeForest Line
Model246TF-MG
YOM1991
ConditionGood Condition
PhotoSee Photo
Table : 12000 x 3600 mm,
Passage between columns : 4400 mm,
Max working height (with fixed plates at slides level) : 1850 mm,
Portal travel X : 12000 mm,
Head transversal travel Y : 5600 mm,
Ram vertical travel Z : 1250 mm,
Spindle taper : ISO50,
Spindle motor power : 32 kW,
Spindle speeds n3 ranges : 10-2500 RPM,
Working feeds (X,Y,Z) : 0-3000 mm,
Rapid feeds (XYZ) : 10000 mm,
Overall dimensions : 19700 x 10000 x 7400 H mm,
Control : CNC Siemens 840 D.
N1 angular indexed head C:360 degree, 144 POS,
N1 long boring head,
N1 long milling head,
60 seats ATC (max L500 x dia250 x Kg40),
Double chip conveyor.
 
  19
IDMA26782
MakeGM Rovera
ModelF3PML8
YOM2002
ConditionGood Condition
PhotoSee Photo
Table : 10700 x 2480 mm,
Passage between columns : 2800 mm,
Portal Travel X : 8000 mm,
Head transversal travel Y : 3300 mm,
Ram vertical travel Z : 1200 mm,
Max working height : 1400 mm,
Spindle taper : ISO 50,
Spindle motor power : 60 kW,
Spindle speeds : 10-4000 RPM,
Working feeds (X,Y,Z) : 0-3000 mm,
Rapid feeds (X,Y,Z) : 15000 mm,
Total installed power : 110 kW,
Weight : 85 tons.
Control : CNC FIDIA C20.
N.1 Tilting indexed head with electro spindle B axis 3,
A axis continuous +/-95 ,
N.1 90 Head : B Axis 3,
N.1 Manual birotative head,
N.1 Head extension,
N.2 Chip Conveyors.
 
  20
IDMA26781
MakeSzim
ModelMFPx2C
YOM1991
ConditionGood Condition
PhotoSee Photo
X Travel : 14625 mm,
Y Travel : 2700 mm,
Z Travel : 1100 mm,
Dist. up to lower edge of vertical spindle : 1250 mm,
A - axis : 72 x 5 ,
C - axis : 72 x 5 ,
Spindle taper : ISO 50,
Spindle turning speed range : 25 - 3000 U/min,
Spindle motor : 22 kW,
Feed : 4000 mm/min,
Rapid traverse : 8 m/min,
Column daylight : 2500 mm,
Total power requirement kW,
Dimensions of the machine ca : 18 x 8 x 6 m,
Weight of the machine ca : 100 t.
CNC Control SIEMENS : 8 MC.
Consisting of 2 gantries moving on common x-bed,
Each equipped with 1 ram-type milling unit with programmable angular milling head on a fixed crossbeam,
Each with ATC for 60 tools,
X travel of gantries : 4550 mm resp. 10075 mm,
Workpiece clamping area : short side 3675 x 2450 mm / long side 8575 x 2450,
Programmable rotary table PEISELER ATU 1600 (between fixed tables) : dia. 2450 mm, Carrying capacity : 26 tons.
 
  21
IDMA26777
MakeJobs
ModelJomach25
YOM1992/Overhaul 2004
ConditionDisassembled
PhotoSee Photo
X : 10000 mm,
Y : 3300 mm,
Z : 1750 mm,
Number of controlled axes: 5,
Distance between the column : 3900 mm,
Table surface (left-right): 9000 mm,
Table surface (front- back): 2500 mm,
Spindle type: Orthogonal head,
Spindle revolutions (min) : 1250 min,
Spindle revolutions (max): 10000/min,
Tool fixture: ISO SK40,
Drive power (max); 14 kW,
Torque (max): 107 Nm,
Axis drives
Feed velocity (min) : 0 mm/min,
Feed velocity (max): 16000 mm/min,
Tool Magazine
Number of positions 18
Dimensions
Total height: 6000 mm
Total Machine Weight : aprox. 65 tons.
5 axis machine
modernized 2004 with new FIDIA 30 CNC controller
electrospindle ISO 40 1250-2500 rpm 107 Nm 14 kW
2500-10000 rpm 53 Nm 14 kW
C-axis : +/- 400
A- " : " 110
T- " : 360
 
  22
IDMA26320
MakeSMTCL
ModelGMC MR2
YOMNew in 2006
ConditionGood Condition
PhotoSee Photo
Work table size : 4000 x 8000 mm,
Distance between column ; 49000 mm,
Max. loading capacity : 7 tons per square meter
T slot : 36,
Gantry frame travel ( x axis ) : 8000 mm,
Saddle travel ( Y axis ) : 5000 mm,
Spindle box travel (z axis) : 5 deg x 72,
C axis : 1600 mm,
Distance from spindle nose to table surface : max. 1600 mm, min : 350 mm,
Spindle taper : ISO 50,
Spindle speed range : 10 to 2000 RPM
Max. spindle torque : 1359 / 1873 N.M.
Spindle motor power : 37/51 KW,
Square ram section size : 420 x 470 mm,
Cutting feed speed range : 1 to 5000 mm/min,
Rapid travel : X : 10 Y : 10 Z : 10 m/mm,
Tool magazine : 40 positions,
Positioning accuracy :
X : 0.015, Y : 0.025 , Z : 0.015 mm,
Repeatability :
X : 0.010 , y : 0.016, Z : 0.010 mm,
Weight of the machine : 140 tons,
Electrical total capacity : 110 KVA,
CNC system : Fanuc 18iM.
 
  23
IDMA26114
MakeForest Line
Model
YOM
ConditionGood Condition
PhotoSee Photo
Distance between columns : 2400 mm,
Space under spindle : 1000 mm,
Table width : 2115 mm,
Table surface : 8000 mm,
Gantry feed ,axis X : 8000 mm,
Transversal spindle feed axis Y : 2500 mm,
Vertical travel of the carriage axis Z : 950 mm,
Rapid traverse speed axis X-Y-Z : 10 m/min,
Work progress in continuous variation X-Y-Z : 1/3000 mm/min,
Max. permissible weight on the table : 4000 kgs/m2,
Loading static machine : 32000 kgs,
Loading dinamic machine : 13000 kgs,
Total power : 55 kva,
45- post model tool rack magazine,
Spindle FA 300 U, Nominal motor power 20 KW,
Commisioning increase of 2.5 to 2.5 head position,
Spindle speed in continuous variation : 10/2500 rpm,
Spindle cone : ISO 50,
Total machine weight : 45000 kgs,
control : Heidenhain 530
 
  24
IDMA25534
MakeZimmermann
ModelFZ50
YOM2003/2004
ConditionGood Condition
PhotoSee Photo
Working Range Milling :-
X axis traverse : 4000 mm,
Y axis traverse : 3500 mm,
Z axis traverse : 1250 mm,
Number of controlled axes : 5,
Portal / Bridge :-
Distance between columns : 3900 mm,
Table :-
Table surface (left-right) : 3000 mm,
Table surface (front-back) : 3500 mm,
Workpiece load max : 15000 kg,
Working Spindle / Head :-
Spindle type orthogonal head,
Mode of operation automatic,
Spindle revolutions max : 5600 min,
Tool fixture : ISO SK 50,
Drive power max : 25 kW,
Torque max : 780 Nm,
Axis Drives :-
Rapid traverse : 2000 mm,
Tool Magazine :-
Number of positions 32,
Dimensions / Weight :-
Space requirements length : 10130 mm,
Space requirements width : 9540 mm,
Total height : 6101 mm,
Ball Spindles,
Guideway covers.
Control : CNC Controls FIDIA C20.
 
  25
IDMA23367
MakeIngersoll
ModelGantry
YOM1973 / 1995
ConditionGood Condition
PhotoSee Photo
Hydrostatic X guideways,
Universal milling head,
2 Milling heads on crossrail with ram section 420 x 420 mm,
Crossrail movement by ac motor and with hydr.clamping,
Measuring system X+Y rack w pinion,
Dimension X travel : 16459 mm,
Dimension Y travel : 6000 mm,
Dimension Z travel : 600 mm,
W axis : 2915 mm,
Stroke of quill vertical : 690 mm,
Table load max : 200,
Spindle distance : min/max 945/6.75 mm,
Spindle headstock : 2 stck,
Headstock dist table spindle center : min/max 45/3580 mm,
Spindle diameter : 152 mm,
Spindle speed : 25-600 min,
Spindle taper ISO : 50,
Spindle drive je 30 kW,
Passage height Quertrager 5.585 mm,
Table surface area : 16.464 x 4.875 mm,
Distance between columns : 5.585 mm,
Total power requirement kW,
Dimensions of the machine ca m,
Control Siemens 840 C,
Weight of the machine : 300 t.
 
  26
IDMA22045
MakeMitsubishi
ModelNPM8
YOM1991
ConditionGood condition,under power
PhotoSee Photo
X travel : 22,000 mm, Distance betweem columns : 6000 mm, Product passage width : 5800 mm, Working height : 3550 mm, Ram size : 600 x 600 mm, Spindle dia : 200 mm, Spindle Speed : 5-400 RPM, Spindle Taper : SA-60, Ram Stroke : 1600 mm, Spindle Motor : 90 kW, Fanuc -15MA CNC Control, Machine Weight : 190 Tons.
 
  27
IDMA21325
MakeDroop & Rein,German
ModelFash2500
YOM1984
ConditionVery good condition,Under power
PhotoSee Photo
Width of worktable without model piece table 2500 mm
Width of worktable with model piece table 5100 mm
Length of worktable 4500 mm
travel of X-axis 4500 mm
travel of Y1 axis 4700 mm
travel of Z axis 1800 mm
travel of Y2 axis 2500 mm
rapid travel of X,Y axis 6000 mm/min
rapid travel of Z axis 5000 mm/min
rapid travel of W axis 3000 mm/min
copying feed speed range of X,Y axis 5 - 3000 mm/min
copying feed speed range of Z axis 5000 mm/min
copying feed speed range of W axis 2 - 600 mm/min
Weight of machine 137 tons,Max. weight charged on model piece table 15 tons.Max. weight charged on workpiece table 50 tons ,CNS system Num 1060
Max. speed of universal milling head 1500 r/min ,
High speed universal milling head-motor power 20 Kw
Max. speed 6000 r/min
Spindle motor power 40 Kw
Spindle speed range 40-2000 r/min
CNS system: Num 1060
 
  28
IDMA20939
MakeLine,France
ModelSL236
YOM1981
ConditionGood Condition
PhotoSee Photo
Two joined tables : 3000 x 16,000 mm, Distance between columns : 3600 mm, Max. load on each table : 200 Tons, Machine weight : 330 Tons.
 
  29
IDMA20937
MakeKolb,German
Model
YOM1982 / 1996
ConditionDismantled
PhotoSee Photo
Clamping Area : 15000 x 2000 mm, X travel : 13200 mm, Y travel : 2800 mm, Z travel : 1000 mm, Passage : 2400 x 1600 mm, Spindle taper : SK50, Distance between spindle / table : 1100 mm, C Axis : 360 deg, B Axis : 100 deg, Speeds : 50 - 5000 RPM, Spindle motor : 34 kW, Rapid traverse : 40,000 mm/min (X,Y,Z), 60 Tool Changers, Sinumerik 840C CNC Control (1996), 2 Chip Conveyors, Machine weight : 45 tons (approx).
 
  30
IDMA20918
MakeForest Line
ModelSeramill240
YOM1990
ConditionGood Condition
PhotoSee Photo
Bed Size : 10000 x 2020 mm, X travel : 8000 mm, Y travel : 2500 mm, Z travel : 950 mm, Distance between column : 2400 mm, Height of spindle : 1200 mm, Table load : 4 tons, Rapid travel : 10,000 mm/min (X,Y & Z), Feeds infintely variable : 1-3000 mm/min, Motor power : 20 kW, Turning speed (stepless) : 10-3200 U/min, Spindle taper : ISO 50, ATC : 45 Tools, NUM 760 CNC Control, Spindle head overhauled.
 
  31
IDMA20554
MakeTos Kurim
ModelFRFQ250
YOM
ConditionBrand New
PhotoSee Photo
Table : 2500 x 8000 mm,
Travels :
X= 7000 mm,
Y= 3300 mm,
Z= 1250 mm,
Spindle Taper : ISO 50,
Table - spindle nose: 2050 mm,
Equipment :
CNC SIEMENS SINUMERIK S 840 D,
Electronic hand wheel HT8,
Drives S 611 D,
External low pressure tool clamping 5 bar, 50 l/min, with tank 1000 l and filtration,
Chain type tool magazine R40 for 40 tools.
 
  32
IDMA19728
MakeMecof
ModelDynamill2000
YOM1996/97
ConditionGood Condition
PhotoSee Photo
Machine Dimension: 5500 x 3000 x 1250, number of hours work Approximately - 35000 h, Spindle speed - 18000 ton, Spindle power - 26, kilowatts - 78000 N / m, tool changer, Fast forward to 15000 mm / m, advance work - 15000 mm / m
 
  33
IDMA19379
MakeHenri Line
ModelTA232
YOM
ConditionVery good condition
PhotoSee Photo
X 4000 mm, Y 3760 mm, Z 500 mm, W 1300 mm, passage between upright 3200 mm, spindles cone ISO50 , AXIS A: +/-45 ,40 Tool changer , AXIS C: 360 000 , GE 2000 Control
 
  34
IDMA19290
MakeQuickMIll
Model
YOM1996
ConditionExcellent
PhotoSee Photo
Table Size 2400 x 4500, Maximum Distance Between Columns 2850 mm, Maximum Clearance Under Bridge 825 mm, Spindle Stroke 300 mm, X 4500 mm, Y 2400 mm, Z 300, Spindle Adjustment 400 mm, Spindle to Table Distance - 125-825, Spindle Speed - 0 to 3000 RPM, Spindle Taper - #50 CAT, Spindle Motor - 35 HP, Machine Electrics - 480V/60Hz/3Ph/100 A, Floor Space (L x W): 7500 x 5200, Machine Height: 3312, Equipped With: Quick Mill PC Based CNC Control w/ Remote Jog Pendant, Standard ISO G/M Code Programming, Ballscrews & Siemens Drives, Direct Drive Hi Torque Servo Motors on X & Y, Thru Spindle & Flood Coolant System, Electronic Cabinet Cooler, 240/480 Transformer.
 
  35
IDMA19049
MakeRambaudi
ModelH60L
YOM1998
Conditioncan be inspected under power
PhotoSee Photo
X-Axis, Longitudinal Gantry Travel 6000 mm,
Y-Axis, Head Travel 2700 mm,
Z-Axis, Ram Vertical Travel 1200 mm,
A-Axis, Head Swivel +/- 110 Degrees,
B-Axis, Head Rotation - 400 Degrees,
Distance Between Columns 4216 mm,
Ram Cross Section 269 mm x 330 mm,
Rapid Traverse X,Y,Z Axes 16002 mm/min,
Feed Rate X,Y,Z Axes 0 to 16002 mm/min,
Spindle Taper HSK 63 A,
Spindle Speeds:to 24,000 RPM,
Spindle Motor 19 KW.
Equipped With:
Fidia M30.F 5-Axis CNC Control (Upgraded In 2001),
2-Axis Articulating Head,
Heidenhain Glass Scales,
Way Covers on X & Y Axes,
Spindle Coolant System,
Spray Mist Coolant,
Twin Hennig Full Length Chip Conveyors,
2438 mm x 5944 mm x 787 mm Set Up Table.
 
  36
IDMA18770
MakeMitsubishi
ModelMVR30
YOM2004
ConditionGood Condition
PhotoSee Photo
Table size:2,000 x 5,000 mm,
X-axis:200 mm,
Y-axis:3,000 mm,
Z-axis:700 mm,
W-axis:800 mm,
Between cols:2,550 mm,
Spindle speed:6,000 rpm,
Tool taper:ISO No. 50 (taper 7/24),
Tooling:ATC 80.
Controller:Fanuc 18i-MB.
Workpiece weight (max.):20,000 kg.
M/C weight:33,500 kg.
 
  37
IDMA18692
MakeShinNippon Koki,Japan
ModelRB4N
YOM1991
ConditionGood Condition
PhotoSee Photo
Table size: 4,300 x 2,000 mm
Distance between column centers: 3,000 mm
Space between columns: 2,450 mm
X-axis: 4,250 mm
Y-axis: 2,000 mm
Z-axis: 400 mm
W-axis (cross rail): 1,100 mm
Tooling taper: BT50
Tooling: ATC40
Weight of work (Max.): 10,000kg
Controller: Fanuc 0M
Accessories: Tools as seen in photos
 
  38
IDMA18235
MakeOkuma,Japan
ModelMAC4
YOM1991
Condition
PhotoSee Photo
X-axis 1150mm,Y-axis 2000mm,Z-axis 400mm,tool taper BT50,tooling ATC50,spindle speed 20 to 2000 rpm,table size 3000 x 1500mm, with OSP-5020M CNC Control.
 
  39
IDMA17183
MakeVierstraete
Model
YOM1993
ConditionGood Condition
PhotoSee Photo
Table size 8000 x 2000 mm
Longitudinal travel X 10,000 mm,
Distance between column 2100 mm,
Passage unter traverse 1400 mm,
Ram travel 1200 mm,
Spindle motor 20 kW,
Spindle speed 0-2000 rpm,
Spindle ISO 50,
CNC Control NUM 750
 
  40
IDMA17044
MakeNorma
Model6000
YOM1990
Conditionretrofitted completely
PhotoSee Photo
table size 5100 x 2100 mm, taper in spindle ISO50 , X 5000 mm, Y 2500 mm, Z 1000 mm, passage enter montants 3000 mm, spindle speeds 10-3000 tr/min , main motor power 22 kW , weight 30 tons , Equipment: Automatic head with CNC 2 continous axis , automatic tools, with 36 tools magazine, CNC NUM 1060.
 
  41
IDMA16747
MakeTanaka
ModelLMXII55TF6000
YOM1995
ConditionGood Condition
PhotoSee Photo
Capacity 6 Kw.
Ossilator Fanuc C-6000A,
Worksize 5,500 mm x 17,000 mm,
Rail Span 7,200 mm,
Rail Length 21,000 mm,
Control Fanuc 16L,
Cutting Speed 1-5000 mm/min,
Fast Feed 24,000 mm/min,
Chiller replaced in 2008.
Rail replaced in 2008.
top