Category : Milling Machines

Sub-Category : Plano Miller

Total Machines Found : 130

Select | Machine Details
 
  1
IDMI7819
MakeMario Carnaghi
Model5000x1000
YOM
ConditionGood Condition
PhotoSee Photo
Table Size: 5500 mm x1000 mm
Between Column: 1550 mm
Three Milling Head,
Two Vertical & One side head.
 
  2
IDMI7805
MakeGerman
Model
YOM
ConditionGood Condition
PhotoSee Photo
2500x 6000
3 Heads
 
  3
IDMI7802
MakeGaravaglia
Model
YOM
ConditionGood Condition
PhotoSee Photo
Length =3000mm,
Width =860mm
 
  4
IDMA34726
MakePietro Carnaghi (Italian)
Model
YOM
ConditionGood Condition
PhotoSee Photo
Displayed: Yes
Table dimensions: 6000x1450 mm
Table longitudinal stroke: 7000 mm
Uprights distance: 1750 mm
Vertical carriage: n1
Lateral carriage: n1
Vertical carriage head: Ram square
Connection: Iso 50 Hydraulic
D.C. motor
Control device
 
  5
IDMA34725
MakeEzio Pensotti
Model
YOM
ConditionGood Condition
PhotoSee Photo
Displayed: 3 Axis
Table dimensions: 6000x2350 mm
Table longitudinal stroke: 7000 mm
Uprights distance: 2500 mm
Table / Spindle nose distance: 1900 mm
Vertical carriage: n1
Lateral carriage: n1
Vertical carriage head: Ram square
Spindle speed: 1000 Rpm
Connection: Iso 50 Hydraulic
 
  6
IDMA34646
MakeKollmann,German
ModelE900
YOM1972
ConditionGood Condition
PhotoSee Photo
Working table area:3700x900mm
Max. table load:12500kg
Table travel:4300mm
Horizontal spindle travel:800mm
Horizontal spindle speed:1200rpm
Vertical spindle travel:1250mm
Vertical spindle speed:1200rpm
Vertical spindle tilt:45
Machine weight:30t
 
  7
IDMI7572
MakeBeghini
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
5500/1800mm passing Gape
5500/1200mm Table Size
 
  8
IDMI7571
MakeCarnaghi
Model
YOM
ConditionGood Condition
PhotoSee Photo
3250 x 1450
 
  9
IDMA34000
MakeStankoimport
Model
YOM
ConditionGood Condition
PhotoSee Photo
63" X 216" long table
4 heads ( 2 vertical and 2 side heads)
without side heads machine can handle 84" between the columns
with side heads on, machine will do 72" between the columns
vertical travel: 60"
digital readouts on all heads
 
  10
IDMI7293
MakeButler,UK
Model
YOM
Condition
PhotoSee Photo
Table Size: 8000mm X 1900mm
Between Column: 2200mm
One vertical and one side Milling head
 
  11
IDMI7292
MakeLoudon
Model
YOM
Condition
PhotoSee Photo
Table Size- 8550 mm x 2135 mm, Gap between Pillars- 2550 mm, Longitudinal travel- 9000 mm, Cross travel- 2550 mm, Vertical travel- 1600 mm, Wt. carrying capacity- 15 ton, Machine with digital readout system, Electrical rewiring done recently & drives fitted.
 
  12
IDMA33335
MakePoreba Poland
ModelFBC90
YOM1956
ConditionGood Condition
PhotoSee Photo
- Table 900 x 3000 mm,
- table feed 19-930 mm / min,
- 4 swivel heads +/- 30 degrees
- 4 x 14 KW heads power, 2 x 7 KW drives
- Total power 75 KW
Weight 31 t
 
  13
IDMA32877
MakeIMUB Bacau,Romania
ModelFLP1000x4000
YOM1987
ConditionGood Condition
PhotoSee Photo  |  See Video
No. of horizontal milling heads: 2
No. of vertical milling heads: 1
Distance between columns: 1420 mm
Distance between columns and table: 210 mm
Table diameter: 5440x1000 mm
Number of T channels: 7 + 2 (sideways)
Width of T channels on upper part: 22 mm
Distance between channels: 100 mm
Max. stroke of table: 4915 mm
Continuous feed of table: 20 800 mm/min
Rapid feed of table: 4000 mm/min
Max. work piece weight: 7600 kg
Machine weight: 44000 kg
Horizontal Milling Head
- stroke: 750 mm
- angle: 45 degree
- milling length: 4000 mm
- vertical feed: 24 480 mm/min
- rapid feed: 600 mm/min
- main speeds: 12, 5 630 rot/min
- driving motor power: 18, 5 kw
- tail spindle diameter: 220 mm
- stroke of tail spindle: 250 mm
- rapid feed of tail spindle: 500 mm/min Vertical Milling Head
- stroke: 1680 mm
- angle: 45 degree
- milling length: 5440 mm
- transversal feed: 24-480 mm/min
- rapid feed: 1000 mm/min
- main speeds: 12, 5 630 rot/min
- driving motor power: 18, 5 kw
- tail spindle diameter: 220 mm
- stroke of tail spindle: 250 mm
- rapid feed of tail spindle: 500 mm/min
 
  14
IDMA32526
MakeCraven,UK
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max width: 3125 mm
Max length: 8500 mm
Max height: 3000 mm
 
  15
IDMA32508
MakeTos Czech
ModelHD10/6000
YOM
ConditionGood Condition
PhotoSee Photo
between colums is 1m, lenght is 6 m.
Weight is 22 t.
 
  16
IDMA32488
MakeOkuma,Japan
ModelMDB
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Table size 1000 x 3000
 
  17
IDMA32418
MakeRussian
Model6M612F11-20
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Table width : 1250 mm,
Length of working surface (L)
Standard version: 4000 mm,
Special version: 2500-6300 mm,
Max mass of machined workpiece per 1 m of table length: 5000 kg,
Max. distance from working surface of table to face-end of spindle of vertical head slider: 1250 mm,
Stroke of vertical head slider: 1000 mm,
Distance from table surface to crossrail : 1150 mm,
Distance from table centre to column: 975 mm,
Vertical head stroke on crossrail: 2800 mm,
Distance from table centre to the face end of horizontal spindle of add head:
Max. 1100 mm
Min: 0 mm
Distance from the table working surface tot he axis horizontal spindle of add head:
max: 1000 mm,
Min: 0
Main drive motor power (spindle rotation): 37-45 kW,
Max. torque on the spindle : 5 kNm,
Spindle rotation speed: 10-2000 r.p.m.
Overall dimensions:
length (with standard version of table): 12500 mm,
Width: 6500 mm,
Height: 5800 mm,
Mass: 49,500 kg.
 
  18
IDMI7088
MakeWMW
Model
YOM
ConditionGood Condition
PhotoSee Photo
5000/1600 table length
Working 6000/1800 mm
With cupwheel grinding head
 
  19
IDMA32365
MakeBurkhardt&Webber
ModelHYOP750
YOM1985/1989
ConditionGood Condition
PhotoSee Photo
WORKING CAPACITY
Longitudinal (x): 7500 mm
Vertical ram (y): 1350 mm
Cross (z): 4000 mm
Column distance: 3200 mm
Quill (w): 400 (4 x 100) mm
Spindle nose - table distance: 1450 mm
Axes support: Turcite
CNC
Cnc: SIEMENS SINUMERIK
SPINDLE
Quill diameter: 130 mm
Spindle power: 45 Kw
Gearbox: 4 gears
Rotating speed: 30-3000 Rpm
Taper: ISO 50
FEEDS
Rapid x: 10 m/min
Rapid y: 10 m/min
Rapid z: 10 m/min
ATC
Positions: 173
TABLE 1
Surface: 4500 x 2600 mm
Capacity: 31000 Kg
Support: turcite
TABLE 2
Surface: 4500 x 2600 mm
Capacity: 31000 Kg
TABLE 3
Surface: 4500 x2 600 mm
Capacity: 31000 Kg
PICK UP STATION FOR HEADS
Positions: 6
HEAD 1
Type: verticale
Spindle taper: ISO50
Max speed: 3000 Rpm
Machine total weight: 160.000 Kg
Floor space: 27.000 x 8.000 x 6.000 mm
Tooling included: +/- 250 ISO 50 cones, 3 boards, gearbox pick-up
Chip conveyor: 3
 
  20
IDMI7085
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
4000x2000x1100mm
15 tons table load
 
  21
IDMA32249
MakeHeckert
ModelSZ12-12-03
YOM
ConditionGood Condition
PhotoSee Photo
Technical Specification on Photos.
 
  22
IDMA32050
Make
Model6650
YOM1981
ConditionGood Condition
PhotoSee Photo
Workpiece size - 5000x16000mm
Workpiece height - 4000mm
Workpiece's weight - 200000kg
Dimensions - 40000x16300x10000mm
Weight - 750000kg
 
  23
IDMA31636
MakeMarufuku
ModelDP-130DK
YOM1986
ConditionGood Condition
PhotoSee Photo
2500 x 1000 mm
 
  24
IDMA31493
MakeStankoimport
Model6M610
YOM
ConditionGood Condition
PhotoSee Photo
longitudinal milling machine 6М610 Parameters
Dimensions of the working surface of the table, mm 1 000 x 3 150 *
The largest longitudinal movement of the table, mm L + 500
Maximum weight of the workpiece per 1 m of table length, kg3 150
The greatest distance from the working surface of the table to the end of the spindle, mm 1 000
Stroke of the vertical headstock, mm 1 000
Distance from work surface of table to cross bar, mm 900
Distance from the middle of the table to the stand, mm 750
Vertical headstock travel along the cross bar, mm 2 000
Distance from the middle of the table to the end of the mountains. of the head spindle, mm 0 - 900
Distance from the table to the axis of the horizontal spindle of the overhead head, mm 0 - 800
Motor power heads. drive (spindle rotation), kW 37 - 45
The maximum torque on the spindle, kNm 5
Spindle rotation frequency, min-1 10 - 2 000
Overall dimensions of the machine (L x W x H), mm 10550х7000х5500
Machine weight, kg 36 500
 
  25
IDMA31188
MakeWMW-VEB
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make : WMW VEB
L: 4000mm
Max. Planning width: 1600
Max. Planning height: 1250 mm
Longitudinal fixing grooves: 9
Table load per 1 m: 3 t/m
Cross slide fast feed (horizontal): 2000mm/min
Cross slide fast feed (vertical): 1000mm/min
Side support fast feed (horizontal): 1000mm/min
Side support fast feed (vertical): 1000mm/min
Overall dimensions (w x h): 4,2 x 3,9m
Weight: approx. 33t
 
  26
IDMI6972
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
4000 mm x 2000
 
  27
IDMI6971
MakeIndian
Model
YOM
ConditionGood working condition
PhotoSee Photo
3600mm X 2000 mm X 2000 mm
 
  28
IDMA30558
Make
Model
YOM1975
Condition
PhotoSee Photo
MARUFUKU DP220W8M
Model 1309, Specification attached in Photos
 
  29
IDMA30555
MakeOkamura
Model
YOM1973
Condition
PhotoSee Photo
NHG2-150-130 TL-111, T:4200x1200mm
4000x1500x1250mm
 
  30
IDMI6891
MakeWMW
Model
YOM
ConditionGood Condition
PhotoSee Photo
3000x1500x2000
 
  31
IDMA30552
MakeOkamura
Model
YOM1973
Condition
PhotoSee Photo
Okamura NHG2-150-130 TL-111 YEAR1973
T:4200x1200mm
4000x1500x1250mm
SPECIFICATION FILE ATTACHED
 
  32
IDMI6890
MakeTOS
Model
YOM
ConditionGood Condition
PhotoSee Photo
3.miter 1.miter 1200 mm Hight
 
  33
IDMA30441
MakeHitachi Seiki,Japan
Model25MJK80
YOM1971/retrofit in 1998
ConditionGood Condition
PhotoSee Photo
Between column: 3000 mm,
T: 2500 x 8000 mm
 
  34
IDMA30420
Make
ModelGF2691 (6G606)
YOM1992
ConditionGood Condition
PhotoSee Photo
Table: 2000 x 630 mm,
Dimensions: 5800 x 4100 x 3600 mm,
Weight: 22500 kg
 
  35
IDMA30402
MakeStankoimport
Model7A116
YOM1989
ConditionGood Condition
PhotoSee Photo
Max size of job:
Width: 1600 mm,
Height: 1400 mm,
Table size: 6000 x 1400 mm,
Ram stroke : 300 mm,
Overall dimensions: 14000 x 5800 x 4900 mm,
Weight: 53.7 tons
 
  36
IDMI6747
Make-
Model
YOM
ConditionGood Condition
PhotoSee Photo
Bed: 5000 x 1100 mm,
Travel: 5 x 1 m, Provide with boring bar and steady rest
 
  37
IDMA30162
MakeMarufuku
Model0F75-2M
YOM1985
ConditionGood Condition
PhotoSee Photo
AA
 
  38
IDMA30115
MakeWaldrich Coburg
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table:1800 x 8000 mm
Maximum langh:8500 mm
Cross Slide : 2250 mm
Maximum Hight - . 2020 mm
Hydraulik Typ
4 Pices supporte
Pleace for Complett Machine : 18500 x 5000 x 3600 mm
Weight: 72 Ton
 
  39
IDMA29650
MakeRussian
Model7216G
YOM1989-11
ConditionGood Condition
PhotoSee Photo
Gantry width: 2100
Workbench : 1600X6000
Working height: 1480
Head X3 -based precision shaver head X2
Weight : 53T
 
  40
IDMA29398
MakeTos Czech
ModelFP16
YOM1972
ConditionVery good condition
PhotoSee Photo
Table : 1250 x 3500 mm,
X: 3200 mm,
Weight: 39 ton,
Control: DRO
 
  41
IDMA29369
MakeStanko-Russia
Model6M310F1
YOM1988
ConditionGood Condition
PhotoSee Photo
Table: 1000 x 3150 mm,
Weight: 36,5 ton.
 
  42
IDMI6410
MakeWaldrich,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size : 1500 mm x 5000 mm,
Distance between column :- 1800 mm,
Height under arm : 1250 mm.
 
  43
IDMA28598
MakeWaldrich Siegen
ModelVF50
YOMNew in 1969
ConditionGood Condition
PhotoSee Photo
X travel: 3150 mm,
Y travel: 1400 mm,
Z travel: 700 mm,
Table : 3050 x 1150 mm,
Sleeve travel: 600 mm,
Milling head: 1300 mm,
Taper ISO: 60,
Motor: 37 kW,
20-3000 rpm,
Stepless feeds: 20-2980 mm/min,
Rapid travel: 6120 mm/min.
 
  44
IDMA28391
MakeKotobuki
ModelTPM1111
YOM1968
ConditionGood working condition
PhotoSee Photo
Work table size : 4200 x 1080 mm,
Width between column : 1470 mm,
X axis travel : 4100 mm,
Y axis travel : 1500 mm,
Z axis travel : 700 mm,
Spindle speed : 35~700 rpm,
Type of tool shank : NT50,
Side milling head : Yes,
Spindle drive motor : AC 15 kW.
Dimension (L x W x H) : 10.8 x 3.9 x 3.5,
Machine weight : 35 ton.
 
  45
IDMA28192
MakeP.Carnaghi
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size : 6000 x 2000 mm,
working height : 2000 mm,
2 Milling heads.
Total weight : 30 ton.
 
  46
IDMI6258
MakePensotti,Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table Size : 3600 x 900 mm,
Between columns : 1000 mm,
Working height : 1000 mm,
With 2 Milling Heads.
 
  47
IDMI6257
MakeTos Czech
ModelFP20
YOM
ConditionGood Condition
PhotoSee Photo
Table (length x width: 4000 x 1600 mm,
Max. admit between columns: 2000 mm,
With Two main heads and TWO side heads total 4 milling heads,
Weight of the machine: 55 tons approx.
 
  48
IDMA28130
MakeWaldrich Siegen
Model
YOM1960/2000
ConditionGood working condition
PhotoSee Photo
Table size: 15240 x 4720 mm,
Longitudinal travel of table: 15600 mm,
Distance between columns: 5345 mm,
Maximum height under spindle nose: 4880 mm,
max job weight on table : 15 Tons per linear meter,
Machine complete with Nr.3 Milling Head spindle : Two vertical with vertical spindle 150 HP (each one) on cross rail + one horizontal spindle 100 HP on side guideways of one vertical
HYDROSTATIC guideways.
 
  49
IDMA28102
MakeDYE
ModelFPD6000
YOM
ConditionGood Condition
PhotoSee Photo
Table size: 2280 x 6000 mm,
Distance between columns: 2700 mm,
Working height: 1800 mm,
The machine has no milling head
 
  50
IDMA28069
MakeStanko-Russia
Model6662
YOM
ConditionGood Condition
PhotoSee Photo
Table working surface : 1800 x 6000 mm,
Longitudinal table travel : 6500 mm,
Machine dimensions : 14750 x 6020 x 5440 mm,
Max workpiece weight : 40 ton,
Machine weight : 76.7 ton.
 
  51
IDMA28060
MakeRussian
Model6650
YOM1982
ConditionGood Condition
PhotoSee Photo
Machining width: 5000 mm,
Machining height: 4000 mm,
Table: 5000 x 20000 mm,
Tables's travel: 17300 mm,
Max weight of work piece: 200000 kg.
 
  52
IDMI6227
MakeMas,Czech
Model
YOM
ConditionDisassembled
PhotoSee Photo
Working Size : 1600 mm x 4000 mm,
Distance between columns : 2000 mm,
Working height : 1600 mm,
Milling head: 2,
Tool head: 2,
A/C motors total : 30 HP.
 
  53
IDMA27999
MakeStanko-Russia
Model5220
YOM1987
ConditionGood Condition
PhotoSee Photo
Table: 2000 x 6000 mm
 
  54
IDMI6218
MakeTitan Romania
Model
YOM
Conditionworking condition ,under power
PhotoSee Photo
Table: 6 x 2 mm,
Height: 2 mm,
Heavy duty With 4 milling head,
Weight: 82 ton
 
  55
IDMI6198
MakeMario Carnaghi
Model
YOM
ConditionGood Condition
PhotoSee Photo
Working size: 4000 x 1300 mm,
Working height: 1200 mm,
With 2 milling head
 
  56
IDMA27702
MakeOkamura
ModelNDP250/700-TL45
YOM1984
Conditionworking condition ,under power
PhotoSee Photo
7100 mm,
Stroke:
X: 7000 mm,
Y: 3050 mm,
Distance between columns: 3000 mm.
 
  57
IDMA27662
MakeStanko-Russia
ModelUF920
YOM1983
ConditionGood Condition
PhotoSee Photo
Maximum distance between housings : 4500 mm,
Maximum Height under cross rail : 4000 mm,
Table size x tables coupled : 4000 x 20000 mm,
Table size, 2 x each : 4000 x 10000 mm,
Table travel, tables coupled : 20700 mm,
Table travel # 1 : 10300 mm,
Table travel # 2 : 10400 mm,
Table weight capacity : 275 tons,
Minimum between vertical spindle : 770 mm,
Maximum between vertical spindle : 4185 mm,
Vertical travel of cross rail : 3015 mm,
Min vertical travel of horizontal head : 86 mm,
Max vertical travel of horizontal head : 3115 mm,
Distance between table T-slots ctrs : 320 mm,
Number of table T-Slot :13,
Feed rate table : 0.118-3000 mm,
Rapid traverse, table : 12000 mm,
Feed rate, milling heads : 0.118-3000 mm,
Rapid traverse, milling heads : 4474 mm,
Feed rate, ram head : 0.059-1500 mm,
Rapid traverse, ram head : 2250 mm,
Rapid traverse, cross rail : 725 mm,
Floor space L x W : 46863 x 14300 mm,
Overall height : 10000 mm,
Machine weight : 797 tons.
Spindle speeds, variable : 5-500 RPM,
Spindle speeds : 4 ranges,
Spindle taper : ISO 60,
Spindle motors : 112 kW,
Torque on spindle : 2000 KPN,
Vertical travel ram head : 950 mm,
Swivel : 15 to 45 Deg.
Milling Head Vertical (Left) :-
Spindle motor : 26 kW,
Spindle speeds variable : 5-800 RPM,
Spindle taper, bolt on : ISO 50,
Vertical travel of ram head : 950 mm,
Milling Head, Side head :-
Spindle motor : 112 kW,
Spindle speeds, variable : 5-500 RM,
Spindle speed ranges : 4,
Spindle taper : ISO 60,
Spindle motor : 112 kW,
Horizontal travel side head ram : 3015 mm,
Torque on spindle : 2000 KPN.
Equipped with :-
Heidenhain digital readout system,
Full pendant control & operators console,
Dual elevating operators platforms,
Split table design,
Chip conveyor system.
Telescoping steel way covers on bed & cross rail.
Double housing, elevating cross rail.
26 kW left head vertical head.
112 kW right hand vertical head.
112 kW right hand horizontal side head.
 
  58
IDMI6177
MakeEzio Pensotti
Model
YOM
ConditionGood Condition
PhotoSee Photo
Working Size: 5000 x 1800 mm.
 
  59
IDMI6176
MakeMario Carnaghi
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size : length 3500 x width 1750 mm,
Max working height : 1500 mm,
Machine Weight : 28 tons.
2 milling head.
 
  60
IDMA27622
MakeWaldrich Siegen
ModelSF125
YOM1974
ConditionGood working condition
PhotoSee Photo
Pass between the uprights : 3400 mm,
The greatest width of the part : 3200 mm,
The height of the passage between the upper edge of the table to the bottom edge of a vertical milling unit : 800 mm,
tables :-
Working surface of table I / II : 3200 h 4000,
Maximum table load on absorption : 60 mt/m,
Maximum table load : 49 ton,
Limits of spindle speeds : 383-2550 rev/min
Milling unit,
Fastening tool in the milling spindle ISO 60,
Quill diameter : 260 mm,
Move,
Table I / II : 3920 mm,
Table in the mix : 8543 mm,
Range of table feeds I : 30.91-309.1,
Range of table feeds II : 303.11-3031.14,
Milling unit, transverse displacement : 5470,
Vertical movement of the quill : 500,
Dimensions : 19,29h 8,5 h 7,06, mm,
Weight : 112.5 ton.
Power for milling spindle : 92 kW,
The total power : 133 kW.
 
  61
IDMA27582
MakeReichler & Knoedler
Model
YOM1976 / Overhauled 2003
ConditionDisassembled
PhotoSee Photo
Table length : 4000 mm,
Distance between columns : 1300 mm
Working height : 800 mm,
Motor power : 15 kW
Machine weight : 25 Tons,
With Ballscrew,
With 2 Milling Heads,
With 1 Planning Head,
With Sony DRO.
 
  62
IDMA27560
MakeWaldrich Siegen
ModelPF-S75
YOM1970
ConditionGood Condition
PhotoSee Photo
WORKING RANGE MILLING :-
X-axis traverse : 8800 mm,
Y-axis traverse : 2750 mm,
Z-axis traverse : 2500 mm,
Number of controlled axes 3,
TABLE :-
Table surface (left-right) : 8700 mm,
Table surface (front-back) : 2400 mm,
Workpiece load (max) : 55000 kg,
WORKING SPINDLE / HEAD :-
Spindle type vertical,
Spindle revolutions (max) : 600 /min,
Spindle diameter : 280 mm,
Tool fixture ISO SK 60,
Drive power (max) : 55 kW,
Angular milling head.
Chip conveyor.
 
  63
IDMA27554
MakeTitan Romania
ModelFLP3100
YOM1986
ConditionGood Condition
PhotoSee Photo
Table dimensions: 3100 x 10000 mm,
Main spindle taper: ISO 60,
Max. height of work piece: 3600 mm,
Max. weight of work piece: 100 to with hydraulic sustain of the table,
Table travel: 11000 mm,
Vertical travel of ram: 1000 mm,
Distance between columns: 3500 mm,
Main spindle speed: 10-50 RPM,
Main motor power: 75 KW,
Machine weight: AB.240 ton
 
  64
IDMI6139
MakeSharada
Model
YOM
ConditionGood Condition
PhotoSee Photo
Between Column : 2850 mm,
Table : 5 Mtr,
Length / Stroke : 5 Mtr,
Table width : 1700 mm,
ISO 50 Milling Head ,
12 Speed Reduction,
Gear Box,
Machine Weight : 24 T /28 T.
 
  65
IDMI6105
MakeShepherd
ModelLeeds
YOM
Conditionworking condition ,under power
PhotoSee Photo
Table size : 4050 x 1130,
Between column : 1250 mm
 
  66
IDMA26871
MakeRussian
Model6620U
YOM1989
ConditionGood Condition
PhotoSee Photo
Length of working surface of the table : 6300 mm,
Table's width : 2000 mm,
Max. travel X,Y,Z : 6800 mm,
Power : 45 kW,
Dimensions : 18970 x 7570 x 6700 mm,
Weight : 121900 kg.
 
  67
IDMA26704
MakePoreba Poland
ModelFBA325
YOM
ConditionGood Condition
PhotoSee Photo
Table Width : 3100 mm,
Table length : 16000 mm,
Working Height : 3000 mm,
Main motor : 75 kW,
Max working weight : 240 ton,
Machine weight : 225 ton.
 
  68
IDMI6004
MakeWMW,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table Size : 4000 x 1500 mm, Between columns : 1800 mm, Working height : 1800 mm, With 1 Vertical milling head + 2 Side milling head.
 
  69
IDMA26647
MakeIngersoll
Model
YOM
ConditionGood Condition
PhotoSee Photo
Width of passage : 2540 mm,
Table size : 2100 x 8500 mm,
Job height : 1800 mm,
Main spindle RPM : 1000,
Main spindle motor power : DC motor 55 Kw,
Side spindle motor power : 55 KW.
 
  70
IDMI5997
MakePunj Steel
Model
YOM1990
ConditionGood working condition
PhotoSee Photo
Table Size : 9000 x 2000 mm,
X Travel : 9000 mm,
Passage between columns : 4100 mm,
Height under traverse : 4000 mm,
With 2 Vertical Heads,
With 1 Side Head,
Total Weight : 60 - 70 Tons,
Total Power : 45 HP.
 
  71
IDMA26596
MakeStankoimport
Model6625
YOM1974/2005
ConditionGood Condition
PhotoSee Photo
Table : 8000 x 2500 mm,
Passage between column : 2815 mm,
Table travel : 7800 mm,
Max working height : 2180 mm,
Max weight on table : 65 tons,
Crossrail travel : 1655 mm,
N 2 Vertical milling heads :-
Spindle motor power : 30 kW,
Spindle speeds N 18 : 20-1000 RPM,
Spindle travel : 350 mm,
Spindle dia : 300 mm,
N 2 Side milling heads :-
Spindle motor power : 30 kw,
Spindle speeds N 18 : 20-1000 RPM,
Spindle travel : 350 mm,
Spindle dia : 300 mm,
Total Weight : 137 tons.
Complete with :-
DRO 7 axis,
Levelling shoes.
 
  72
IDMA26561
MakeGSP
Model19R
YOM1967 / 2006
ConditionGood working condition
PhotoSee Photo
Table : 8165 x 1800 mm,
Distance between columns : 2000 mm,
Vertical travel : 2000 mm,
Automatic longitudinal travel : 8250 mm,
Rapids transv on table (2 gear) : 8000 mm,
Max weight on table : 30000 kg,
Spindle taper : 200 mm,
Milling head : +/-45 grados,
Speeds 9 : 16A630 RPM,
Table trasl motor without elect : 10 HP,
Head traslation motor : 5.5 HP and 10 HP,
Dimensions : 18500 x 4700 x 4500 mm,
Weight of machine : 60 ton.
With 1 Milling Head.
 
  73
IDMI5975
MakeSharda-Punjab
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table : 1200 x 5400 mm,
Bed : 8100 mm,
Long and the max. job admit : 1685 mm wide x 1330 mm height,
Both milling heads +1 gearbox
 
  74
IDMI5959
MakeItalian
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size : 8000 x 1500 mm,
Max gap between column : 2000 mm,
No of Milling head : 3 nos.
Main motor : 30 kw.
 
  75
IDMI5956
MakeVWF Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Length : 7000 mm,
Width : 2500 mm,
Job Height : 3000 mm,
 
  76
IDMA26412
MakeGSP
Model2115RF6
YOM1971 Rebuilt 2011
ConditionGood Condition
PhotoSee Photo
Table : 6000 x 1350 mm,
Distance between uprights : 1500 mm,
Milling head : 1 x vertical,
Planning heads : 1 x vertical, 1 x horizontal,
Dimensions : 13000 x 3400 x 2800 mm.
 
  77
IDMI5882
MakeLoudon
Model
YOM1962/1980
ConditionGood Condition
PhotoSee Photo
X axis : 6500 mm,
Y axis : 2590 mm,
Z axis : 3200 mm,
Fixed table : 6000 x 2600 mm,
Distance between uprights : 3200 mm,
Working height : 2600 mm,
Approx. Job weight : 80 Tons,
RPM : 350-750,
Feed : 1500 mm,
Main motor : 70 kW,
With 2 Face Milling Attachment,
With 1 Side Milling Attachment.
 
  78
IDMI5872
MakeButler,UK
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size : 6000 x 2000 mm
 
  79
IDMI5871
MakeMario Carnaghi
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size : 6000 x 1750 mm,
Max. working width : 2500 mm,
Max. working height : 1800 mm,
Spindle taper : ISO 50,
Various Speed for table movement,
With 1 Vertical milling head + 2 Planning head (Vertical + Horizontal),
With New Electricals & New Electrical Panel.
 
  80
IDMI5870
MakeBonardi
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table : 6000 x 1200 mm,
Between gap : 1600 mm,
Vertical height : 1200 mm.,
With Dro,
Panels and electricals.
 
  81
IDMA26074
MakeWaldrich Coburg
Model
YOM1965
ConditionGood Condition
PhotoSee Photo
Table size : 3600 x 6000 mm,
Table length total : 7200 mm,
Distance between the column : 3000 mm,
Distance between table and traverse : 2700 mm,
Milling feed : Mechanical ,
Planing feed : Hydraulic,
Working height : 2450 mm,
Main engine : 90 kW,
Total length : 17 m,
Total width : 8,5 m,
Total height : 6,8 m,
Weight total : 155,000 kg.
 
  82
IDMA25997
MakeTos Czech
ModelFP20
YOM
ConditionDisassembled
PhotoSee Photo
Clamping surface of table : 1600 x 4000 mm,
Max. table loading : 100000 N,
Length of bed : 8000 mm,
Travel of table : 3700 mm,
Table feeds : 25-750 mm/min,
Range : 10-500 mm,
Spindle head speeds : 25-1000 mm,
Width between housings ; 2060 mm,
Weight of machine : 49,000 kg.
 
  83
IDMA25332
MakeRussian
ModelUF5220
YOM
ConditionComplete
PhotoSee Photo
Table : 6000 x 2000 mm,
Travel of table : 6700 x 2500 x 1950 mm,
Dimensions : 16500 x 8370 x 7200 mm,
Weight : 135 tons.
 
  84
IDMA23437
MakeMarufuku
ModelDP150WS-4M
YOM
ConditionGood Condition
PhotoSee Photo
Table :1500 x 4000. 7.5 kw.
 
  85
IDMA23040
MakeWaldrich Coburg
Model10DF
YOM1969
ConditionGood Condition
PhotoSee Photo
X travel : 10,000 mm, Y travel : 2000 mm, Z travel : 800 mm, W travel : 2040 mm, Table Width : 1800 mm, Workpiece weight : 30 Tons, Distance between columns : 2040 mm, Milling spindle dia in forward position : 150 mm, Torque : 600 mkg, Spindle taper : ISO 60, Axial adjustment of the spindle slide : 800 mm, Work speed : 6-80 m/min, Speed of return : 6-80 m/min, Cross rail adjustment : 1160 mm, Power Capacity (milling head) : 36 kW, Turning speed : 20-600 U/min, Total Weight : 120 Tons, With Universal milling head, Planning heads is equipped with Heidenhain DRO, Milling head is equipped with Heidenhain Position PT855 Display.
 
  86
IDMI5577
MakePoreba Poland
ModelHDC225
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Five Heads, One Milling Heads On Top & Two Planner heads On Sides + One Extra Head,

table 2250x8000 mm,

The machine weight is 100tons plus aprox.
clean slides and the table very good condition.
 
  87
IDMA22315
MakeLine,France
ModelSL236CNC
YOM
ConditionGood Condition
PhotoSee Photo
PLANO-MILLING MACHINE :
Two stands,
Variable traverses,
Two vertical spindle,
Two-spindle horizontal digital control device for 9 Axis,
Technical parameters:
The passage between stands: 3600 mm,
Dimension tables associated: 3000x16000 mm,
Max. clearance under the spindle head: 3400 mm,
Load: 200 tons,
The approximate weight of the machine 330 000 kg.
Mobile Desk - longitudinal movement of table - X-axis :
Two work tables with automatic plant connection,
Usable area of each table: 3000x8000mm,
Running - for each table: 8100 mm,
Tables attached to: 16 400 mm,
Fast transfer: 8000mm/min,
Working shift with no-tread changes: 0 to 3000mm/min,
Hydrostatic lubrication of high-strength,
The guide bench area made of special bronze,
Table of double-drive kinematic chain pre-tension (patent LINE) with
electric motor drive GETTYS,
Automatic locking by using permanent management position,
Detection of positioning by using precision pinion and rotary sensor,
Protection of the guiding surfaces of the bearings by slide sheets.
Variable traverse:
Blocking with automatic drive bay,
Output of 75kW,
Spindle taper ISO 60,
Spindle speed 10-500 (800) rpm, with a no-tread change,
Running of the slider: 1000 mm,
Automatic blocking tool.
Slider Movement:
1000 mm running,
movement fast: 3000mm/min,
Working movement with no-tread shift : from 0 to 3000mm/min,
Attached lead surface of the suport is made from resisting steel, with,
hardness about 60 following Rockwel with supporting wheels,
Drive the ball screw and nut prednaptmi electric GETTYS,
Automatic locking of continuous position control,
Detection of position with precision rack and a rotary sensor,
Automatic lubrication.
Electrical equipment:
Hanging desk on which are placed all control functions,
Electric Variator cabinet combines power and electromechanical control and protection apparatus,
Connect to the network 3x380V - 50Hz.
IR:
CNC - GENERAL ELECTRIC,
TYPE 550 MBD.
 
  88
IDMA21910
MakeHerbert Ingersoll
Model
YOM1972/95
ConditionGood Condition
PhotoSee Photo
x-travel 17907 mm,
y-travel 2900 mm,
z-travel 2900 mm,
spindle distance max.: 2769 mm,
spindle motor vertikal 92 / horizon 74kW,
table surface area 11176 x 2540 mm,
table clamping surface: 6908 x 2540 mm,
table lenght 1 + 2 gekoppelt 17907 mm,
Distance spindle/table max. vertikal ; 3073 mm,
total power requirement 370 kW,
weight of the machine ca. 260 t,
dimensions of the machine ca. 36,6 x 10,5 x 8,1 m.
 
  89
IDMA21874
MakeForest Line
Model
YOM1978
ConditionGood Condition
PhotoSee Photo
Table diamensions :3100 x 10000 mm,
Max. size of working part : 10000 x 3100 x 3000 mm,
Max. load allowed on the table : on each meter 10000kg., total 120000kg.,
Working travels : X= 10400 mm, Y= 4600 mm, Z= 2600 mm, W= 1000 mm,
Main spindle taper : ISO 60,
Main drive motor P : 75 kw,
Feed drives motor torque: X= 2x45 Nm, Y= 45 Nm, Z= 2x45 Nm, W= 45 Nm.
 
  90
IDMA21647
MakeUlyanovsk
Model6662
YOM1963
ConditionComplete ,good working condition
PhotoSee Photo
Table working surface: 1800 x 6000 mm, Longitudinal table travel: 6500 mm, Machine dimensions: 14750 x 6020 x 5440 mm, Max workpiece weight: 40000 kg. Machine weight : 76700 kg.
 
  91
IDMA21603
MakeRussian
Model6662
YOM1960s
ConditionComplete ,good working condition
PhotoSee Photo
Table working surface: 1800 x 6000 mm, Longitudinal table travel: 6500 mm, Machine dimensions: 14750 x 6020 x 5440 mm, Max workpiece weight: 40000 kg. Machine weight : 76700 kg.
 
  92
IDMA21446
MakeRussian
Model6M610F11-20
YOM1989
ConditionExcellent
PhotoSee Photo
dimensions of workpiece 3150 x 1000 x 1000 mm, mass of machined workpiece 3100 kg, table working surface dimensions 3150 x 1000 mm, distance between column without horizontal head 1700 mm, distance from table working surface to cross rail 950 mm, moving of table 3900 mm, number rotation angle of milling heads 2 pcs, vertical head slide traverse 1000 mm, vertical head traverse along cross rail 2400 mm, horizontal head spindle travel (sleeve type ) 200mm, distance from table working surface to horizontal spindle axis 0-600 mm, rapid setting traverse rate table 5000 mm/min, vertical head 5000 mm/min, horizontal head 2000 mm/min, rotation speed of spindle head 31,5-1600RPM, table feed range 4-3000 mm/min, vertical head feed range 20-1000 mm/min, main drive power vertical head 37kW, main drive power horizontal head 15 kW, machine overall dimensions 10550 x 7500 x 5200 mm, machine weight with separately standing equipment 45000 kg .
 
  93
IDMA21445
MakeRussian
Model6606
YOM1981
ConditionLittle used
PhotoSee Photo
2 heads.
 
  94
IDMA21288
MakeRussian
Model6M610F1
YOM1985
ConditionDismantled
PhotoSee Photo
table 1000 x 3150 mm,
 
  95
IDMA21287
MakeRussian
Model7B220
YOM1986
ConditionGood Condition
PhotoSee Photo
Table : 2000 x 6300 mm, main motor 160 kW , dimensions 16500 x 7100 x 5800 mm , weight 96.9 tons.
 
  96
IDMA21286
MakeRussian
Model6M616F4
YOM1985
ConditionGood Condition
PhotoSee Photo
Table size 1600 x 5000mm, table travel 5600 mm , vertical die holder 4 , horizontal die holder 16 , limits of : vertical (DH) 10-2000 mm , horizontal (DH) 40-1250 mm , limited size of processable surfaces : length 5000 mm , width 1650 mm , height 1150 mm , power of motor of main drive : vertical 45,37 kW , horizontal 30 kW , limits of feed : table 4-10000 mm/min , vertical 3-10000 mm , ram of vertical DH 3-5000 mm , horizontal DH 3-2500 mm , dimensions 13800 x 6900 x 5800 mm , weight 56.6 tons.
 
  97
IDMA21222
MakeRussian
Model6662
YOM1964
ConditionGood working condition
PhotoSee Photo
Table 2000 x 6000 mm, 4 Heads, Distance from face of vertical spindle till working surface of a table Max. 1920 mm, Min. 100 mm, Distance from axis of horizontal spindle till working surface of a table 0-1550 mm, Distance between faces of horizontal spindle Max. 1950 mm, Min. 1400 mm, Distance between axis of vertical spindle Max. 2900 mm, Min. 580 mm, Distance between columns 2200 mm, Distance between lower surface of cross arm till working surface of a table Max. 1880 mm, Min. 330 mm, dimensions (L x W x H) 14750 x 6020 x 5440 mm, Weight 76.700 Kgs, with 4 milling heads
 
  98
IDMA21125
MakeRussian
Model6662
YOM
ConditionGood Condition
PhotoSee Photo
Table working surface: 1800 x 6000 mm, Longitudinal table travel: 6500 mm, Machine dimensions: 14750 x 6020 x 5440 mm, Max workpiece weight: 40000 kg. Machine weight : 76700 kg.
 
  99
IDMA21086
MakeRussian
Model7216G
YOM1987
ConditionGood working condition
PhotoSee Photo
Table:1450x6000mm, max size of job : width 1600, height 1400 mm , table size 6000 x 1400 mm , ram stroke 300 mm , overall dimensions 14000 x 5800 x 4900 mm , weight 53.7 tons, 2 milling heads, 2 planing heads, 1 grinding head.
 
  100
IDMA20919
MakeTos Czech
ModelFP16
YOM
ConditionDismantled
PhotoSee Photo
Table-clamping surface 1250x3500 mm,
x= 3200 mm,
Distance between the coloumns: 1660mm,
sharp taper in spindel 50,
number of speeds 19,
standard speed 14-900 rpm,
increased speed 18-1120 rpm,
machine size: LWH: 710043503800 mm,
machine weight: 39000 kg.
 
  101
IDMA20860
MakeRussian
Model7212
YOM
ConditionGood Condition
PhotoSee Photo
Table 4000 x 1120 mm,
Weight 40 tons
 
  102
IDMA20859
MakeRussian
Model6620
YOM
ConditionGood working condition
PhotoSee Photo
table 6500 x 2100mm. 4 heads,Table surface 2000 x 6300mm Table travel, mm: 6800 Rotational frequency of spindle, min-1 20 - 1000 Power of main drive, kW 30 - 45 Feeds (stepless control) mm/min - Table 1.6 - 2000 - Head 3.15 - 2000 - Slide 1.6 - 1000 Overall dimensions 19000 x 6650 x 7100 Machine mass, 122 ton. with 4 heads.
 
  103
IDMA20770
MakeBelarus
Model6M612F1
YOM1989
ConditionGood Condition
PhotoSee Photo
Working table surface dimensions (width x length) 1250 х 4000 mm,
Distance between columns 1950 mm,
Distance from table surface to vertical spindle face:
Max 1275 mm,
Min 0+50 mm,
No. of milling spindles:
-Horizontal 2
-Vertical 1.
Overall dimensions with remote units and electrical equipment (length x width x height) 12500 х 6500 х 5800 mm.
with digital readout and axes pre-setting is intended for complex machining of housing components by means of milling, drilling and boring.

 
  104
IDMA20746
MakeButler,UK
Model
YOM
ConditionGood Condition
PhotoSee Photo
table size 1800 x 4800 mm, max. distance between columns 2100 mm, max distance under crossrail 1650 mm, 1 x top + side future mill milling head
25/50 hp, 50 ISO, variable speed
1 x top + side planning heads
All swivel heads

 
  105
IDMA20727
MakeRussian
Model6662
YOM1961
ConditionGood working condition
PhotoSee Photo
Table 2000 x 6000 mm, 4 Heads, Distance from face of vertical spindle till working surface of a table Max. 1920 mm, Min. 100 mm, Distance from axis of horizontal spindle till working surface of a table 0-1550 mm, Distance between faces of horizontal spindle Max. 1950 mm, Min. 1400 mm, Distance between axis of vertical spindle Max. 2900 mm, Min. 580 mm, Distance between columns 2200 mm, Distance between lower surface of cross arm till working surface of a table Max. 1880 mm, Min. 330 mm, dimensions (L x W x H) 14750 x 6020 x 5440 mm, Weight 76.700 Kgs.
 
  106
IDMA20505
MakeWaldrich,Germany
ModelFP125
YOM1971/1986
ConditionGood Condition
PhotoSee Photo
Table Size : 5100x1250 mm,
Clumping area : 4500x1250 mm, Tischbelastung max 17000 kg,
Milling length : 4500 mm and width : 1250 mm,
Passage between the Column : 1550 mm,
Passage height : 200-1820 mm,
Taper SK 60,
Spindlefeeds : 20-600 U/min stufenlos,
Table rapid hydraulic stepless : 6-2000 mm/min,
Machine weight : 45.000 kg,
Accesorries : 3 axis DRO , Coolant and Angulare Milling head.
 
  107
IDMA20215
MakeSanzen
Model
YOM
ConditionVery good condition
PhotoSee Photo
Stroke 3000 x 3000 x 2200 mm
between columns 1250 mm, cutting height 800 mm.
 
  108
IDMA20156
MakeRussian
Model6625U
YOM1984
ConditionVery good condition
PhotoSee Photo
table working surface 2500 x 8000mm, height of workpiece accomodated 2000mm, range of spindle speeds 20-1000 RPM, power of main drive motor 30 x 4 kw, overall dimensions 22460 x 8830 x 6700, weight 136 tons.
 
  109
IDMA20108
MakeRussian
Model6620
YOM1976
ConditionGood Condition
PhotoSee Photo
table 2000x 6000 mm,
working height 2500 mm,
working weight 50 Tons,
machine weight 115 tons.
 
  110
IDMA19913
MakeRussian
Model7216G
YOM1986
ConditionGood Condition
PhotoSee Photo
max size of job : width 1600, height 1400 mm , table size 6000 x 1400 mm , ram stroke 300 mm , overall dimensions 14000 x 5800 x 4900 mm , weight 53.7 tons, 2 milling heads, 2 planing heads, 1 grinding head.
 
  111
IDMA19796
MakeMarufuku
ModelOP3W3M
YOM1975
ConditionVery good condition
PhotoSee Photo
Table - 1000 x 3000 mm, Planing Height - 1100 mm, Planing Width - 1400 mm, Length of bed - 6000 mm.
 
  112
IDMA19775
MakeReis
ModelTUS160A
YOM
ConditionVery good condition
PhotoSee Photo
Table size - 1800 x 1550 mm, Daylight -1570 mm, Height - 5000 mm, Weight - 4600 mm, Length - 6000 mm, Power - 200 ton, Main power - 20 KW, Incl. heating system for up and downside part, with SIEMENS S7 control, Hydraulic and electric overhouled.
 
  113
IDMA19566
MakeS.Eustacchio
Model
YOM1960
ConditionUnder power
PhotoSee Photo
Table 6000 x 1850 mm , BC 2100 mm, Height - 2200 mm, Weight - 80 Ton, Bed length - 14.5 metre single piece, EQUIPPED WITH - 4 planing heads , 1 milling head .
 
  114
IDMA19454
MakeRussian
Model6620U
YOM1980
ConditionGood Condition
PhotoSee Photo
Table working surface 2000 x 6300 mm
Max dimensions of workpiece 2000 x 2000 mm ( W x H)
T-slots number 9
T-slots width 28 mm
Distance between T-slots 200 mm
Longitudinal table travel 6800 mm
Max trasversal travel of headstock 3590 mm
Spindle travel 350 mm
Ram travel 630 mm
trasversal beam travel 1960 mm

Machine dimensions:
16415 x 6660 x 7015 mm ,
Max workpiece weight 50 tons,
Machine weight 121.9 tons.
 
  115
IDMA19017
MakePensotti,Italy
ModelPR200-250
YOM
ConditionVery good condition
PhotoSee Photo
table 13000 x 1950 mm,

table travel 13000 mm.
passage between columns 2500 mm.

max. working height 1800 mm.
max. weight on table 4 tons/mt.
n. 1 vertical milling head:
- spindle motor power 30 HP,
- spindle taper ISO 50
- spindle speeds - n. 18 30 - 800 rpm,
- spindle travel 225 mm.
n. 1 side milling head:
- spindle motor power 20 HP
- spindle taper ISO 50
- spindle speeds - n. 18 30 - 800 rpm.
- spindle travel 200 mm.
table motor power (DC.) 66 kw.
n. 2 vertical planning tools
total weight 105 tons.
complete with:
DRO
 
  116
IDMA18806
MakeHeyligenstaedt
Model135FKS/15-C/D
YOM1980
ConditionGood Condition
PhotoSee Photo
Travels - 4000/1800/1000 mm, Table - 1640x5000 mm, Taper - STK 60, of milling spindle - 150 mm, of milling spindle pinole - 240 mm, Control FIDIA M 30.
 
  117
IDMA18501
MakeKendal & Gent,U.K
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table 1350 x 2700 mm,
Max distance between columns 1700 mm,
Max height under cross rail 900 mm,
Milling head speeds 21 410 rpm,
Weight approx 25 ton.

 
  118
IDMA18254
MakeWMW Niles ,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
2500 x 8000 mm, machine weight 120 tons.
 
  119
IDMA18175
MakeWaldrich-Poreba
ModelWPF75
YOM1973
ConditionGood condition,under power
PhotoSee Photo
Table work area 2400 by 12000mm,
Max table travel 12500mm,
Max distance B/cols 2750mm,
Max ht-u-cross rail 3000mm,
Spindle speeds 0 to 600rpm,
Spindle drive motor 55kw,
Table feed rate 0 to 3000mm/min,
Milling head feed rate 0 to 1000mm/min,
Vertical feed rate to milling spindle .0 to 500mm/min,
Table feed drive motor 25kw,
Table loading 75t,
Electrical supply 380v3ph50hz,
Machine weight 160 tons.electrical over haul 2001 PLC drive fitted
 
  120
IDMA17605
MakeWaldrich Siegen - Poreba
Model
YOM1978
ConditionComplete,very good condition
PhotoSee Photo
Table size 1600 x 8000 mm,
Distance between columns 2000 mm,
Spindle taper ISO 60,
Spindle motor power 75 kw,
Machine total weight 120 Ton.
 
  121
IDMA17569
MakeRussian
Model6M616F11
YOM1989
ConditionComplete
PhotoSee Photo
table 1600 x 5000 mm.
 
  122
IDMA17353
MakeAschersleben
ModelHZFS20-10-05
YOM1989
ConditionGood Condition
PhotoSee Photo
x-travel 5000 mm,
y-travel 2000 mm,
workpiece height 1000 mm,
hollow 2210 mm,
table length 5250 mm,
table width 1600 mm,
working lenght 5000 mm,
length of stroke min./max. 1000-5800 mm,
table load 3150 kg/m,
workpiece weight 15750 kg,
table speed -stepless- 5,6-80 m/min,
milling feed range 10000 mm/min,
rapid speed 10000 mm/min,
pulling power 100 kN,
total power requirement 125 kW,
weight of the machine ca. 65 t.
dimensions of the machine ca. 15,2 x 7 x 4,3 m.
 
  123
IDMA17145
MakeRussian
Model6M610F11-20
YOM1991
ConditionComplete,very good condition
PhotoSee Photo
table 1000 x 4000 mm, 3 milling heads
 
  124
IDMA17139
MakeWaldrich-Poreba
ModelWPF50/200/800
YOM1978
ConditionVery good condition
PhotoSee Photo
table dimensions 1600x8000 mm,
distance between columns 2000 mm,
working height 1600 mm,
spindle taper ISO60, spindle motor power 75 kw
machine weight 120 tons.
 
  125
IDMA17066
MakeRussian
Model6M610F1
YOM1979
ConditionComplete,working condition
PhotoSee Photo
table 1000 x 3150 mm, max travel by X,Y,Z 3650 mm.
 
  126
IDMA16812
MakePensotti,Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table 7000 X 2300 mm,
displayed: 3 axes,
n of vertical carriages,
n of lateral carriages,
connection: ISO 50,
spindle speed: 1000 rpm,
motor power: 25 kw,
direct current motor,
distance between uprights: 2400 mm,
between table spindle nose: 1750 mm,
longitudinal stroke table: 7000 mm,
hanging of control,
head with vertical stroke,
RAM square.
 
  127
IDMA16709
MakeEzio Pensotti
ModelFP165
YOM
ConditionGood Condition
PhotoSee Photo
table 1400 x 7900 mm, length of automatic milling 7500 mm, swing between uprights 1650 mm, max milling height 1300 mm, spindles rotation speed (N deg 19) 20/895 RPM , spindle motor power 30 kW, stroke of spindle holder sleeve 250 mm.
 
  128
IDMA15017
MakeNoble & Lund
Model
YOM
ConditionGood Condition
PhotoSee Photo
Width : 3000 mm, Length : 8000 mm, Height : 1600 mm, Motor
Milling Head : 50 HW, Head : 2ea, Side mill : 1 ea 50 HW, DC Motor : Auto Cycle.
 
  129
IDMA13519
MakeChinese
ModelX2012D
YOMBrand New
ConditionBrand New
PhotoSee Photo
table working surface 1250 x 4000 mm , max size of workpiece to be machined 4000 x 1250 x 1250 mm , distance between 2 columns 1650 mm , distance from vertical, spindle nose to table surface 240-1355 mm , distance from horizontal spindle axis to table surface - 100 - 1025 mm , table travel 4500 mm , max weight on table 10 tons , rabge of table feeds (stepless) 10-1200 mm/min , rapid traverse of table 4800 mm/min , spindle taper ISO 50 (7;24) , quill dia 250 mm , quill travel (manual) 200 mm , spindle speed (12 steps) 50-630 r/min , swivel of milling head : vertical +_30 deg , horizontal +_ 30-15 deg , spindle motor 15 kW , Axis drive motor (AC convertor) 5,5 kW , overall dimensions 11660 x 4350 x 4165 mm , machine weight 43 tons (for 3 milling heads).
 
  130
IDMA13485
MakeChinese
ModelBXM2012B
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max machining size 1250 x 4000 mm , max machining height (Planing 1000/milling 800 mm) , table size 4000 x 1120 x 200 mm , guide way width of column 430 mm , guide way width 150 mm , guide way width of cross rail : centre distance of guide way 700 mm , table speed : range 0.03 - 30 m/min , machining precision (lineal measure) 1000:0. 02 mm/m , motor power 37 kW , weight 39 tons .
top