Category : Sheet Metal

Sub-Category : Blanking Line

Total Machines Found : 28

Select | Machine Details
 
  1
IDMA34618
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton
Stroke: 300 mm
SPM: 25 - 50
Die Height:900 mm
Adjust:200 mm
Bolster: 2500 x 1500 mm
Slide:2480 x 2480 mm
Machine Type: Uncoiler
Make: Aida
Coil External Diameter: 800 - 1800 mm
Coil Internal Diameter: 508 mm
Coil Width: 300 - 1300 mm
Coil Weight: 15,000 kgs
Machine Type: Roller Leveller
Make: Aida
Coil Width: 300 - 1300 mm
Coil Thickness: 0.6 - 3.2 mm
Work Roller: 80 x 1350 mm
Number of Rollers: 4 up, 5 down
Pinch Roller: 150 x 1350 mm
Number of Pinch Rollers: 2
Machine Type: Counter Feeder
Make: Aida
Coil Width: 300 - 1300 mm
Coil Thickness: 0.6 - 3.2 mm
Feed Length: 200 - 1400 mm
Feed SPM: 15 - 35
 
  2
IDMA31703
MakeCleveland,Ohio
ModelS2-400-96 x 86
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Bed: 576 x 2400 mm,
Stroke: 300 mm,
Adjustment: 300 mm,
Stroke down ADJ up (SDAU): 43-1/2"
Stroke per min: 25-50
Air clutch and brake: yes,
No windows: yes,
Triad light curtain: yes,
Link 1000 tonnage monitor: yes,
Cross feed and end conveyors: yes,
Consitting of:
60"pneumatic zig zag coil feed
Capacity: 1500 mm,
Thickness:3.375 mm,
Stroke: 1050 mm,
lateral travel: 1050 mm,
6-slide position settings: yes,
Zig zag on /off modes: yes,
variable speed: yes,
61" x 0.135" Dallas powered straightener
Capacity: 1525 x 3.375 mm,
Number of rolls: 7
Coil hold down: yes,
Entry and exit pinch rolls: yes,
Pneumatic lift entry pinch rolls: yes
20,000 LB x 60" x 84" Upender,
Serial: 16788
Dallas D51570 coil car
Serial: 16787
Model: D51570
4 post stand: yes,
60" x 20,000 LB dallas powered uncoiler,
I.D. range: 350 x 500 mm,
Max O.D range: 2100 mm,
Coil hold down: yes
 
  3
IDMA31614
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 350 ton
Stroke: 150 mm
Die Height: 550 mm
SPM: 20 - 50
Adjust: 150 mm
Bolster: 1850 x 1100 mm
Slide: 1850 x 1100 mm
Die Cushion: 10 ton x 2 = 20 ton
Cushion Stroke : 100 mm
Cushion Pad: 350 x 350 x 2
Width: 350 mm
Thickness: 0.8 - 6.0 mm
Orii Uncoiler Leveler Feeder
 
  4
IDMA30054
MakeClearing
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
N.1 CNC Feeding line “ SCHLEICHER” with coiler capacity 30 Ton. ect.
N.1 Blanking press 500 Ton.
Mechanical with 4 plunger,
Force : 500 Ton,
Stroke : 305 mm,
Stroke /min : 15 – 40,
Slide regulation : 508 mm,
Daylight : 1.600,
Lateral windows : 2.250 mm,
Table : 4.700 mm x 2.744 mm,
Frontal moving table,
N.1 CNC Stacked DMS.
 
  5
IDMA29565
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 700 tons,
Stroke: 300 mm,
Shut height: 1130 mm,
Die height: 900 mm,
SPM: 20,
Adjust: 300 mm,
Bolster: 2340 x 1220 mm,
Slide: 2340 x 1220 mm,
Balance cylinder: 24 tons,
Slide knockout: 5 tons x 3 = 15 tons,
Blank lifter pad: 1350 x 800 mm,
Uncoiler leveler
Coil diameter: 1420 mm,
Coil width: 250-780 mm,
Coil thickness: 0.8-3.2 mm,
Piling height: 400 mm,
Coil feed capacity: 250-410 mm,
Feeder
Sheet length: 0.1-700 mm,
Sheet width: 300-800 mm,
Sheet thickness: 0.6-3.2 mm,
Pas line: 1100 mm,
Feed speed: 50 m/min,
Shear
Capacity: 14 ton,
Sheet width: 250-780 mm,
Sheet thickness: 0.8-3.2 mm,
Stroke: 81.23 mm,
Die lifter
Bolster: 2340 x 1220 (x2),
Weight capacity: 10 tons each,
Feed speed: 10 m/min
 
  6
IDMA29534
Make
Model
YOM1992
ConditionExcellent
PhotoSee Photo
Transfer Press :-
Make : Automa.
Capacity : 400 ton,
Stroke : 460 mm,
Die Height : 900 mm,
SPM : 15 - 35,
Micro Inching SPM : 3,
Adjust : 100 mm,
Bolster : 3500 x 1200 mm,
Slide : 3500 x 1200 mm,
Stage : 15 (including blanking),
Die Cushion : 1 - 14 stage / 1.3 - 5 ton,
Cushion Stroke : 170 mm,
Sub Cushion : 100 ton,
Sub Cushion Stroke : 340 mm,
Sub Cushion on stages : 1 - 14,
Knockout : 0.8 - 3.0,
Knockout Stroke : 170 mm,
Main Motor : 75 Kw.

Blanking Stage :-
Make : Automa.
Capacity : 100 ton,
Stroke : 80 mm,
Die Height : 400 mm,
SPM : 15 - 35,
Blank Size : ⏀100 - 220 mm,
Adjust : 30 mm,
Bolster : 1200 x 600 mm,
Slide : 700 x 600 mm.

Uncoiler Leveler Feeder :-
Make : Date.
Coil Width : 100 - 500 mm,
Coil Thickness : 1.0 - 3.6 mm,
Coil Weight : 4000 kg x 2,
Coil External Dia : 650 -1500 mm,
Coil Internal Dia : 508 mm,
Feed Stroke : 40 - 240 mm,
Zig Zag Stroke : - 2 0,
Blank Diameter : ⏀80 - 220 mm,
Zig Zag Diameter : ⏀80 - 220 mm,
Line SPM : 15 - 35.

Transfer Feeder :-
Feed Stroke : 250 mm,
Clamp Stroke : 140 mm,
Feed Bar Width : 450, 600 mm,
Blank Feed Height : 505 mm,
Field Bar Size : 125 x 70 mm.
The blanking press is an integral part of the system, and it is in fact shown on the line specifications as stage number 15, with stages 1 to 14 being located on the 400 ton transfer press itself.
 
  7
IDMA29481
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity:700 ton,
Stroke: 300 mm,
Die Height:775 mm,
SPM: 15
Bolster: 1000 x 1000 mm,
Slide:1000 x 1000 mm,
Adjust:200 mm,
Die Cushion:30 ton
Cushion Stroke:0 - 150 mm
Pad Size:700 x 500 mm

Uncoiler Leveler Feeder
Make:Orii
Width:50 - 900 mm,
Thickness:1.2 - 6.0 mm,
Speed:4 - 36 m/min
 
  8
IDMA28506
MakeSchuler German
ModelEBS4-600-3,6-550
YOM1993
ConditionVery good condition
PhotoSee Photo
Capacity : 600 ton,
Ram stroke : 400 mm,
Ram adjustment : 350 mm,
Shut height (stroke down, adjustment up) : 1200 mm,
Table surface area ca : 3600 x 2500 mm,
Ram surface area ca. : 3600 x 2500 mm,
Side opening : 2200 mm,
Number of stroke : 10-44 spm,
Table height over floor : 1010 mm,
Schleicher Decoiler :-
Coil weight max : 35 t,
Material width : 240-1950 mm,
Material thickness max : 2.5 mm,
Cross section : 3400 mm,
Schnutz Leveller (Typ : RME18/50/13-2000TZ) :-
Feeding speed max : 60 m/min,
Material width max : 2000 mm,
Number of leveller rolls : 13,
Diameter of leveller rolls : 50 mm,
Distacker unit :-
Blank size : 150-2000 x 250-2500 mm,
Blank height max : 400 mm,
Blank weight on distacker max : 10 ton.
With 2 moving bolster.
 
  9
IDMA28470
MakeSchuler German
ModelSK4B-600-3,6-450
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity: 600 ton,
Stroke: 450 mm,
Bed area: 3600 x 2500 mm,
Slide area: 3600 x 2500 mm,
Speed: 10-40 SPM,
Daylight at T.D.C:1200 mm,
Slide adjustment: 400 mm,
Power capacity: 120 KW,
Press dimensions: 5500 x 4000 x 7850 mm,
Total press weight: 235 ton,
Control system: Siemens S5
Wilhelmsburger year 1978, Blanking equipment:
Blank length x width: 3000 x 2000 mm,
Blank weight: 45 kos,
Adjustment of cutting ram: 400 mm,
Band width: 600-2000 mm,
Capacity at 10 strokes / min: 12000 kpm,
Coil external diameter: max. 1850 mm,
Coil internal diameter: max. 610 mm,
Coil weight in kg: 45 kg,
Feed speeds: 340-2400 mm/min,
Inlet height over table: 620 mm,
Length:3200 mm,
Max. ram stroke: 450 mm,
Plate thickness: 0,6-2 (2,25) mm,
Prepared for pressure air drawing device in the table: 180/1000 1/min./kN,
 
  10
IDMA28381
MakeAIDA,Japan
ModelC2-25
YOM1977
ConditionGood Condition
PhotoSee Photo
Press capacity: 250 ton,
Stroke length: 170 mm,
Stroke per minute: 20~50 s.p.m.,
Die height:450 mm,
Slide adjustment: 120 mm,
Slide area: 2100 x 700 mm,
Bolster area: 2700 x 920 mm,
Accessories
With Uncoiler, Straighter and Feeder
 
  11
IDMA28336
MakeMuller Gefrees
ModelPZEWL500x2550R/HK
YOM2000
ConditionExcellent condition,under power
PhotoSee Photo
Capacity : 500 t,
Ram Stroke : 40 - 200 mm,
Ram adjustment : 120 mm,
Daylight : 820 mm,
Table surface ca. : 2.200 x 1.500 mm,
Ram surface ca. : 2.100 x 1.300 mm,
Number of strokes : 15 – 45 min-1,
Weight ca. : 72 t.
Dimensions ca. (LxWxH) : 4250 x 2865 x 5190 mm,
MÜLLER feeding line (YOM 1992).
Coil weight each side : 3 t.
Coil exterior diameter : 1400 – 1500 mm,
Coil interior diameter : 450 – 550 mm,
Material width max. : 10 – 500 mm,
Material thickness max. : 5,0 mm,
Feeding length : 0,1 – 6.000 mm,
PLC SIEMENS Simatic OP37.
 
  12
IDMA28210
MakeUSI
ModelS4-600-180-84
YOM1964
ConditionGood Condition
PhotoSee Photo
Press Forces :-
Total force (nominal) : 600 ton,
Press Table :-
Table surface (left-right) : 4572 mm,
Table surface (front-back) : 2134 mm,
Ram (MECHAN. PRESS) :-
Stroke max : 610 mm,
Stroke rate (max.) : 28 /min,
Tool Assembly Dimensions :-
Shut height (stroke down, adjustment up), TDC : 980 mm,
Passline opening (free passage in side columns) : 1920 mm,
Dimensions / Weight :-
Total weight approx : 180000 kg.
With Feeder.
 
  13
IDMA27551
MakeWMW Erfurt,Germany
ModelPEEXIII160
YOM1969 / 2012
ConditionGood Condition
PhotoSee Photo
Pressing force of : 160 ton,
Ram stroke : 20-160 mm,
Ram adjustment : 120 mm,
Throat : 400 mm,
Mold height : 560 mm,
Table area : 1100 x 700 mm,
Ram surface : 900 x 670 mm,
Machine weight : 15000 kg.
Facilities :-
Roll feed,
Manufacturer Dreher,
Model 1125 F,
Year 1994,
Bandwidth max. : 810 mm,
Band thickness max. : 2 mm,
Feed rate : 90 m / min,
Air supply : 5 -6 bar,
Feed straightenning device.
Manufacturer Dreher.
Type 1676 FRA2.
Year 1979.
Bandwidth max. : 800 mm,
Band thickness max. 2 mm,
Feed rate 40 m / min,
Air supply 5 -6 bar,
Coil,
Manufacturer Dreher.
Type 2385 GVI.
Year 1979.
Bandwidth max. : 800 mm,
Inner diameter of : 500 mm,
Outer diameter max. : 1500 mm,
Coil weight max. : 7000 kg,
pressure : 160 t.
throat : 400 mm.
stroke : 20 - 160 mm.
total power requirement kW,
weight of the machine ca. : 15 t.
Eccentric Erfurt with coil line Dreher.
The press line was modernized in 2012 with new control technology .
Through the installation of a safety PLC with Can- bus, the
press control is in safety category IV.
For visualization of the system and for entering the cams
for tool monitoring and interim airing the roll
feed, there is a touch panel on the press .
 
  14
IDMA27541
MakeBliss-Emua
ModelUnused
YOM1996/1999
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 302 mm,
Adjustment : 400 mm,
2 mobile plates,
Bed Size : 5200 x 2135 mm,
Between tie bars : 5350 mm,
Long min/max : 450/1850 mm,
Thickness max/min : 0,5/2.
 
  15
IDMA27489
MakeHaulick
ModelHPVD160S
YOM1972
ConditionGood Condition
PhotoSee Photo
Capacity : 160 ton,
Press Table
table surface (left-right): 1130 mm,
table surface (front-back): 1100 mm,
thickness of bolster plate: 120 mm,
number of T-slots: 4
Ram
table surface (left-right): 1030 mm,
table surface (front-back): 800 mm,
stroke: 125 mm,
stroke rate (max.): 140/min,
thickness of bolster plate: 120 mm,
Ram (Mechan.Press)
ram adjustment: 120 mm,
autom. ram adjustment: yes
stroke adjustment: yes,
stroke min: 5 mm,
stroke max: 125 mm,
stroke rate (min): 30/min,
stroke rate (max): 140 /min,
Tool Assembly Dimensions
shut height (stroke down,adjustment up),TDC: 530 mm,
distance between columns (H-frame): 1130 mm,
Electrical Specification
total power consumption: 30 kw,
mains voltage: 380 v,
main frequency: 50 Hz,
Dimensions/Weights
total height: 3800 mm,
total weight approx.: 18000 kg,
Haulick -Feeder
Model: CO30/50,
Drive directly via eccentric shafts,
Intermediate ventilation, feed length: 300 mm,
material
Width: 450 mm,
Thickness : 2.5 mm,
Inlet height: 50 mm adjustable,
Feeding accuracy: 0.1 mm,
Decoiler
Manufacturer Hermann Schleicher Exlangen
Type: H5,
TOM: 1972,
5t coil weight,
Biggest band outer roll diameter: 1500 mm,
Clamping area on the tape roll inside diameter: 450-520 mm Haspelverfahrweg: 1400 mm,
Engine type:
Total power requirement: 2,1 kW,
Voltage to 380 V, Current: 3 x 380,50 Hz,
weight: 2300 kg,
Straightening machine
RM-L 450 Nr. 1161-04
Bandwidth: 450 mm,thickness : 0.5-2.0 mm,
Belt speed.continuously : 6-30 m/min,
2 feed rollers,6 straightening rolls,loop control by light barriers.
 
  16
IDMA27480
MakeMuller Weingarten
Model
YOM1998
ConditionGood Condition
PhotoSee Photo
Automatic blanking process
Option of sheet cutting at selected angles
4 turn over tables
Basic memory 300 types of patterns
Coil inner diameter from 508 up to 610 mm,
Coil weight : 20 tons,
Wide range of semi-finished product cutting from a circle :-
sheet width : 350/2000 mm,
sheet length : 250/3800 mm,
sheet thickness : 0.5/3.5 mm.
Length of line : 47 m,
Press :-
Capacity : 4000 kN,
Length of stroke : 250 mm,
Die height : 1100 mm,
Slide adjustment : 300 mm,
Slide area : 4000 x 2500 mm,
Bolster area : 4000 x 2500 mm,
Speed : 18-80 spm,
The line was installed in 1998 and was operated till 2011. The line was tested in 2012.
Coil loading unit :-
Model : U200.
Coil outer diameter : 600-2000 mm,
Coil outer diameter for threading tab : 900-2000 mm,
Expansion range of mandrel : 470-630 mm,
Coil in feed / out feed :- above press table 1600 mm and above floor 1610 mm,
Threading and Draw off unit :-
Model : UE 200.
Bending roller, effective from coil outer diameter : 900 mm,
Length of cutting sheet adjustment in range : 100-500 mm,
Draw off speed approximately : 20 m/min.
Cropping Shears :-
Model : UAS200.
Rate of strokes per min at length of 500 mm : 18 1/min,
Shearing stroke approximately : 160 mm,
Washing Machine :-
Model : UWL200.
The chemical agent use with washing machine : Oil Anticorit DFV 2001 PI4118 index 0244-9-039.
Straightening unit :-
Model : UR200.
Straightening speed : max 80 m/min,
Setting speed : 0-80 m/min,
Rolls for straightening : Qty 13 piece and dimension 50 mm,
Feeder rolls : Qty 2 piece and dimension 180 mm,
The regulation of rolls for straightening according to thickness of sheet.
Coil loop equipment :-
Model : UT200.
The stock of coil loop is controlled by photo cell.
Weld seam detection unit :-
Weld are detected with an approximation : 200 mm,
Bore diameter is between : 15-30 mm,
After detection and cropping the section with weld seam, the line stops. The semi-finished product with weld seam will be transported to a container on the line end by manual control.
Roll feed unit :-
Model : UR200.
Feed length infinitely variable : 100-3800 mm,
Feed accuracy up to 1000 mm feed length : 0,2 mm,
Feed accuracy above 1000 mm feed length : 0,2 mm,
Feed roll diameter : 220 mm,
Stroke rate : 80 min.
 
  17
IDMA27434
MakeUSI Clearing
Model
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Capacity: 500 ton,
Bed size: 2700 x 2400 mm,
Side windows: 1950 mm,
Stroke: 300 mm,
Slide adjustment: 500 mm,
Speed: 14-30 mm/min,
The press line comprises of the following:
Decoiler & coil car. 1850 x dia x 25 t expanding mandrel
No.1 leveller 6 mm thick material 7 roll
No.2 levleller 3 mm thick material 7 roll,
Feed roll max pitch 2500 mm,
With stacker with automatic unloading
The electrical switch gear was retrofitted approx 10 year ago with seimens PLC drives this press is now.
 
  18
IDMA27420
MakeRaster
ModelHR250-1900NL
YOM1986
ConditionGood Condition
PhotoSee Photo
PRESS FORCES :-
Total force (nominal) : 250 ton,
PRESS TABLE :-
Table surface (left-right) : 2000 mm,
Table surface (front-back) : 1000 mm,
Opening in bed (left-right) : 1700 mm,
Opening in bed (front-back) : 300 mm,
RAM :-
Ram force : 250 ton,
Table surface (left-right) : 1940 mm,
Table surface (front-back) : 800 mm,
Stroke : 85 mm,
RAM (MECHAN. PRESS) :-
Ram adjustment : 150 mm,
Autom. ram adjustment,
Stroke adjustment NO,
Variable speed yes,
Stroke rate (min.) : 30 /min,
Stroke rate (max.) : 150 /min,
Hydraulic overload protection yes,
TOOL ASSEMBLY DIMENSIONS :-
Shut height (stroke down, adjustment up), TDC : 450 mm,
Distance between columns (H-frame) : 2200 mm,
Passline opening (free passage in side columns) : 620 mm,
STRIP-FEEDER :-
Feeder type roll feeder,
DIMENSIONS / WEIGHTS :-
Height above floor level : 4600 mm,
Total weight approx : 55000 kg
PRESS DESIGN :-
Frame design,
Openings in uprights,
Number of slide actions 1,
Table cushion no,
Opening in table,
Moving bolster (quick die change system) no.
With Press Controller RASTER LOGISTAT CP 80.
With late model servo feeder WEINGARTEN 300 x 4 mm with BECKHOFF Controller.
With measuring wheel for feeder supervision.
With RAZIOL band lubrication with felted rollers.
With BRANKAMP PROKOS PK 508 press- and tool-supervision system.
With spare motor for main drive.
With 3 belt conveyors for scrap and components.
Control : PLC.
 
  19
IDMA27405
MakeSchuler German
ModelTH1200-2.5x1.6
YOM2004
ConditionGood Condition
PhotoSee Photo
Blanking Line Hydraulic
Press forces
Total force (nominal): 1200 ton,
Press Table
Clamping surface (left-right): 2500 mm,
Clamping surface (front-back):1600 mm,
Ram
Clamping surface (left-right): 3400 mm,
Clamping surface (front-back): 2130 mm,
Stroke: 600 mm,
Ram (hydr. press)
Number of main cylinders:2,
Approximation velocity max.: 600 mm/s,
Working velocity min: 24 mm/s,
Working velocity max.: 47 mm/s,
Return velocity max.: 600 mm/s,
Ram ejectors
Stroke: 150 mm,
Force: 12 ton,
feeders
Feeder type: Roll feeder,
Electrical specification
Total power consumption: 550 kw,
Mains voltage: 400 v,
Mains frequency: 50 Hz,
Dimensions/weights
total weight approx: 201000 kg,
Attachments for presses
Return stroke damping; yes,
Autom.tool clamping device: yes,
Hydraulic overload protection: yes,
Decoiler
Design: Single coil
Sheet width max: 1050 mm,
Sheet width min: 150 mm,
Max. weight of coil: 22 ton,
max. diameter of coil: 2000 mm,
Min. internal diameter of coil: 570 mm,
Leveller unit
Sheet width max: 1050 mm,
Sheet width min: 150 mm,
Sheet thickness max: 8 mm,
Number of leveller rols: 8
Diameter of leveller rolls: 96 mm,
Distance between leveller rolls: 104 mm,
Diameter of feed rolls: 160 mm,
Feed velocity min: 2 m/min,
Feed velocity max: 43,5 m/min,
Control: PLC
Hydraulical punching press for sheet thickness upto 8 mm consisting of:
Decoiler
Straightener
Feeder
Shear
and a 1200 ton press.
The table plates (2 x) can be interchanged via a tool change cart
This press is fitted with 4 blanking stroke dampers.
Schuler TH 1200-2.5 x 1.6 1,200 ton hydraulic blanking press,
laweco coil loader,
HSK-280-1050 de coiler
SHF 8-96/160-1050 sheet metal straightener
ADCH-1050-8 transverse cutting unit,
Outfeed conveyor system,
Storatec tool changer
Eco protection fire protection system for control cabinets.
 
  20
IDMA27351
MakeFagor
ModelSE4-800-4500-2500
YOM2005
ConditionGood Condition
PhotoSee Photo
Capacity : 800 tons,
Stroke : 250 mm,
Moving table area : 4500 mm x 2500 mm,
Slide area : 4500 mm x 2500 mm,
Shut height : 1050 mm,
Speed : 20-60 spm
Adjustment : 300 mm,
Total height above floor : 6630 mm,
Power of main motor : 110 kW,
Lateral windows : 2200 mm.
 
  21
IDMA26706
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 tons,
Stroke per minute : 20-30,
Stroke : 150 mm,
Die height : 450 mm,
Adjust : 100 mm,
Bolster : 1300 x 1000 mm,
Slide knockout : 25 tons,
Knockout stroke : 50 mm,
Uncoiler leveller feeder
Make : Aida,
Coil width : 100-600 mm,
Coil thickness : 0.8-6.0 mm,
Coil weight : 3000 kgs x 2,
Feed stroke : 10-500 mm.
 
  22
IDMA26626
MakeFukui
ModelMDE300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 300 mm
Stroke per minute : 20 - 60,
Moving Bolsters : 2300 x 1500 mm (2 Bolsters – Front and back moving),
Slide : 2300 x 1500 mm,
Adjust : 200 mm,
Die Height : 700 mm,
Die Cushion : 60 ton,
Cushion Stroke : 150 mm,
Pad : 1800 x 1000 mm,

Uncoiler Leveller Feeder Unit
Thickness : 0.6 – 2.3 mm,
Width : 300 – 1300 mm,
Speed : 42 m/min,
Pinch Roll : 150 x 1450 mm.
Work Roll :- Top 4, Bottom 5, 75 x 1450 mm.
Back Up Roll :- Top 5, Bottom 6, 78 x 350 mm.
 
  23
IDMA26102
MakeSueko
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 320 ton,
Stroke : 250 mm,
Bolster : 3200 x 2130 mm,
Stroke per minute : 15-35,
Die height : 1000 mm,
Adjust : 200 mm,
Side opening : 1930 x 865 mm.
 
  24
IDMA26098
MakeIHI,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 250 mm,
Bolster : 3200 x 2130 mm,
Stroke per minute : 16-60,
Die height : 1000 mm,
Adjust : 200 mm,
Side opening : 2000 x 1500 mm.
 
  25
IDMA26054
MakeSeyi,Taiwan
ModelHSD-H-275
YOM1996
ConditionExcellent condition,under power
PhotoSee Photo
Capacity: 275 Ton
Stroke: 2475 mm,
Speed: 25 - 50 SPM
Shut Height: 490 mm,
Adjustment: 2475 mm,
Slide Area: 2165 x 10825 mm,
Bed Area: 2360 x 1180 mm,
Windows: 7875 wide x 500high
Motor: 40 HP
Control: Allen Bradley
Load Monitor: Helm
Cams: Yes
Light Curtains
Feed Line Consisting of:
Coe 24” wide press mounted servo feeder
Model: CPRF-324, Serial# 15004-1 with cabinet control
Coe 24” wide powered straightener
Model: CPPS-PO-300-24, serial# 15004-2
Coe 24” wide coil reel
Model: CPR-PO-6024, serial# 15004-3
(6) keepers and Hold Down
 
  26
IDMA26052
MakeSeyi,Taiwan
ModelHSD-H-330
YOM1997
ConditionExcellent condition,under power
PhotoSee Photo
Capacity : 330 ton,
Stroke : 2475 mm,
Speed : 25-50 s.p.m.,
Shut height : 7475 mm,
Adjustment : 2475 mm,
Slide area : 2750 x 1180 mm,
Bed area : 2750 x 1325 mm,
Motor : 50 HP,
Control : Allen bradley,
Load monitor,
Cams,
Light curtains,
Feed line consisting of:
Coe 600 wide press mounted servo feeder,
Mode : CPRF-54-36, Serial 22467-1,
Servo master control,
Model CPR-PO-8024, Serial #22467-3,
(6) keepers and hold down
 
  27
IDMA26038
MakeDong Shin
ModelDSH500
YOMBrand New
ConditionBrand New
PhotoSee Photo
Capacity : 500 Tons,
Limit of Capacity : 7 mm,
No. of Stroke : 50 SPM,
Stroke : 120 mm,
Die height (Shut Height) : 560 mm,
Area of Slide : 1500 x 1400 mm,
Area of Bolster : 1500 x 1400 mm,
Adjustment of Slide : 200 mm,
Main motor : 75 kW,
Air pressure : 5.5 kg/cm,
Slide Adjustment motor : 3.7 kW.
NC Leveller Feeder Specification :
Coil thickness : 6.0 mm,
Coil width : 600 mm (max),
Coil weight : 10,000 Kgs,
Coil dia (In) : 508 mm,
Coil dia (Out) : 1800 mm,
Coil Material : SPCC, Cr
Feeding Capacity : Max. 50 spm (With release)
Feeding Capacity : Max. 70 spm (Simple feeding)
Feeding Length : Max. 9999.99 mm,
Line Speed : 16 m/min.
With Shuttle Robot System, Safety Fence, Centering Conveyor, Exit Conveyor.
 
  28
IDMA23182
MakeKrupp
ModelP2Kz315/2000
YOM1978/2005
ConditionGood Condition
PhotoSee Photo
Pressure 315 t,
table-size 2250 x 1250 mm,
stroke 300 mm,
strokes of ram per min. 12 - 24,
passage width 2300 mm,
ram surface 2000 x 1200 mm,
column travel -side 1000 mm,
ram adjustment 250 mm,
shut height (stroke down, adjustm. up) 500 mm,
voltage 380 V,
total power requirement 65 kW,
weight of the machine ca. 52 t,
dimensions of the machine ca. 4,5 x 2,5 x 5,5 m.
Machine is a blanking press with infeed line. Infeed line was retrofitted in 1992.
Brand: Wilhelmsburger/A&B 800 mm x 1-4 mm, decoiler, straightener and roll feeder.
top