Category : Sheet Metal

Sub-Category : Plate Bending Hydraulic

Total Machines Found : 90

Select | Machine Details
 
  1
IDMA34551
MakeSertom
ModelRJ3000
YOM
ConditionGood Condition
PhotoSee Photo
Diameter of upper roll: 380 mm,
Diameter of side roll: 356 mm,
Use full roll length: 3050 mm,
Max. working thickness: 24 mm,
Working length: 8100 mm,
Working width: 2150 mm,
Overall dimension Mt. : 8, 1 x 2, 15 x 2, 25h
Weight: 17000 kg,
Upright passage: 3000 mm,
Sheet thickness: 24 mm,
Working length: 3050 mm
 
  2
IDMA34473
MakeDavi
ModelMCB2248/S
YOM1997
ConditionGood Condition
PhotoSee Photo
Bending Capacity: 7'5" x 2.36" / 1.97"
Top Roll Length: 7'5"
Top Roll Diameter: 17.32"
Bottom / Side Rolls Diameter: 15"
Drive: 60 HP
Electricals: 460/3/60
Equipped With:
Operator Controls
Powered Slip Roll
10.5' x 9' Roller Conveyor
Dimensions & Weight: Call Perfection Global for Dimensions, 68300 Lbs
 
  3
IDMA34423
MakeDavi
ModelMCB K-30
YOM2017
ConditionGood Condition
PhotoSee Photo
4 roll hydraulic dual pre-pinch with plate pre-bend feature
Top roll 530 mm
Plate width max. 3100 mm
Capacity on plate S355 JR
max 3000x50 mm
1500x60 mm
Ø 600 mm smallest bending dia, upon plate thickness and strength

Configuration with the machine:
Control CNC : Easy- Roll programmable the 4 rolls and top support
Hardened rolls high resistance surface of the 4 rolls
Conical Device , titable rolls for cones-reducers forming-
Top support hydraulic 6 Tons – supporting the formed shell up to 3,5 mtrs OD
75 HP power installed on centralized hydraulic power unit

Warranty : 6 months of warranty included with the machine
Erection and training: with Davi service engineers at your premises
Voltage EU 380/50
Dimension: see layout drawing in enclosed
 
  4
IDMA34418
MakeDavi Promau
ModelMCA0622/S
YOM2009
ConditionVery good condition
PhotoSee Photo
sheet width :600 mm
plate thickness: 5 mm
pre-bending: 4 mm
Control DAVI Smart Basic
upper roll diameter :192 mm
lower roll diameter: 192 mm
side roll diameter :152 mm
total power requirement :7,35 kW
weight of the machine ca.: 2,5 t
dimensions of the machine ca. m
 
  5
IDMA34411
MakeRyazan Russia
Model
YOM1988
ConditionGood Condition
PhotoSee Photo
Max. plate thickness:
-At bending: 25 mm
-At prebending: 20 mm
Max. plate width: 3150 mm
Min. bending radius: 380 mm
Bending speed: 7500 mm/min
Upper roll diameter: no more than 500 mm
Total power: 25 kW
Main drive motor power: 37 kW
Voltage: 380 V; 50 Hz
Dimensions:
-Left-to-right: 7500 mm
-Front-to-back: 4830 mm
-Height: 3655 mm
Machine height above floor level: 2500 mm
Weight: 44500 kg
 
  6
IDMI7590
MakeEnergy,India
Model
YOM2016
ConditionAlmost unused,perfect
PhotoSee Photo
Plate rolling machine. Capacity 20 mm x 3 mtrs. Double pre bending. Fully hydraulic with section bending attachment and cone bending attachment.
 
  7
IDMA34041
MakeSertom
ModelEMO30-50
YOMNew 2008
ConditionExcellent condition,under power
PhotoSee Photo
Capacity rolling: 3100 x 60mm
Capacity pre-bend: 3100 x 50 mm
Top roll dia: 610 mm
Side rolls dia: 520 mm
Power output: 90 KW
Machine weight: 53 tons approx
Equipped with: cone rolling, extra top roll dia 500mm, vertical sheet support, front and rear lateral sheet supports.
 
  8
IDMA33823
MakeJapanese
Model
YOM
ConditionGood Condition
PhotoSee Photo
Upper roller pressur: 450 ton,
Maximum board width: 3500 mm,
Work roller length: 3600 mm,
Bending ability :
Symmetry:T32 X B3500 X dia 1600 mm,(min)
Not Symmetrical: T25 X B3500 X dia 1400 mm (min)
Upper roller diameter: 0530 mm,
Lower roller diameter: 0275 mm,
Center distance of two rollers: 460 mm,
Bending speed: 4.75 m/min
Men electric bower: 45 Kw,
Mobile electric power bower: 5.5
Machine power: 22 KW,
Machine weight: 40 t,
External dimensions (length x width x height): 6540 x 2470 x 2560mm
 
  9
IDMA32772
MakeROUNDO
ModelPAS420
YOM
ConditionGood Condition
PhotoSee Photo
Thickness of bent sheet: 30 mm
The length of bent sheet: 2000 mm
The diameter of the rollers: 420 mm
The diameter of the bottom rollers: 345 mm
Power: 45 kW - Weight: 26 T
 
  10
IDMA32616
MakeSertom
ModelEMO
YOM1990
ConditionGood Condition
PhotoSee Photo
Bending length: 2500 mm
Bending capacity max: 18-36 mm
Diameter top roll: 370 mm
Diameter side rolls: 330 mm
Weight: 14000 kg
Accessories
1 Lateral sheet metal holding device
1 Cone bender
Instruction manual
 
  11
IDMA32584
MakeWMW,Germany
ModelUBBD20x4000
YOM
ConditionGood Condition
PhotoSee Photo
Max. sheet width: 4000 mm
Max. sheet thickness at a max. width: 20 mm
Max. material fluidity range of the bending sheet at its small sizes: 28 kg/mm²
Bending speed: 4 m/min
Min. bending diameter: 750 mm
Upper roll diameter: 363 mm
Lower roll diameter: 280 mm
Upper roll span (distance between axes of bearings): 4950 mm
Material fluidity range of the upper roll: 42 kg/mm²
Overall dimensions:
-Length: 8700 mm
-Width: 1900 mm
-Height over floor level: 1500 mm
Machine weight 35620 kg
 
  12
IDMA32393
MakeTos Czech
ModelXZMP3150/10
YOM1982
ConditionGood Condition
PhotoSee Photo
3150 x 10 mm,
Machine weight: 24,700 Kgs
 
  13
IDMA32142
MakeDavi
ModelMCO3022
YOM1995
ConditionGood Condition
PhotoSee Photo
Pre bending: 6 mm
Bending: 8 mm
Bending width: 3000 mm
 
  14
IDMA30803
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
HAUSLER BENDING ROLL
CAPACITY : 3 000 X 45 mm
4 ROLLS HYDRAULIC
 
  15
IDMA30801
Make
Model
YOM1972
ConditionGood Condition
PhotoSee Photo
1 used 4-Roller-Plate-Bending-Machine
Make HAEUSLER, Type VRM-hy 3000 x 65 mm
new 1972
for prebending and rounding of cylinders and cones.
Width of plate 3000 mm
Surface length of rollers 3050 mm
cold working:
for edge setting at full width of plate 65 mm
for bending at full width of plate 70 mm
Roller diameter: - Top Roll 680 mm
- Bottom Roll 680 mm
- Side Roller 550 mm
Smallest possible bending diameter on top
roller 770 mm
Number of rollers Four
Driven rollers Top + Bottom roller
Rollers drive mechanical
Operating speed 4 m/min.
Reversing of the roller
turning direction electro-mechanical
Roller adjustment hydraulic
Tilting of the hinged
front bearing housing hydraulic
Control one control panel
Weight of the machine approx. 113 to. (metric)
Installed power: roller drive 95 kW
hydraulic drive 22 kW
ACCESSORIES:
- conical bending device
- top support device
- interchageable top roll ø 525 mm
 
  16
IDMA30781
MakeFaccin
Model
YOM
Condition
PhotoSee Photo
4 Roll Bending Machine FACCIN
type 4 HCL 3050 x 48/40
with pre-bending
Manufacturer Faccin Itally
New In 1993
the length of the roll: 3000 mm
max sheet thickness: 48/40 mm
weight of machine: 53.000 kg
the diameter of the central rollers: 500 mm
diameter of the rolls of the side: 450 mm
rotation speed: 1.5; 2.5; 4 m / min
speed raiding rolls: 250 mm / min
installed power of: 80 HP
voltage of: 380 Volt
frequency of: 50 Hz
phases: 3
Performance machine with pre-bending
max. bent sheet thickness: 40 mm
Min diameter of the inner bending: 2500 mm
max. thickness of the sheet metal bent: 35 mm
min diameter of inner bending : 750 mm
the yield strength: 240 kg / mm2
Performance machine without pre-bending
max thickness of bent sheet: 48 mm
min. diameter: 2500 mm
The yield strength of the material: 24 KG / mm2
Max. thickness of bent sheet: 35 mm
min inner diameter: 750 mm
the yield strength: 30 kg/mm2

Overall dimensions:
length: 8000 mm
width: 2500 mm
height: 2800 mm
Weight: 53 000 kg
 
  17
IDMA30545
MakeFroriep
Model
YOM
Condition
PhotoSee Photo
3 rolls with pre-bending Plate Bending Machine FRORIEP
Max. thickness: 120mm
Max. length: 4100mm
Top roll: 840mm
Side rolls: 460mm
Motor: 30kW
 
  18
IDMA30425
MakeLisse
ModelCH35/40X30
YOMOverhauled 2010
ConditionGood Condition
PhotoSee Photo
Pre bending Capacity : 35 mm,
Bending Capacity : 40 mm,
Max. Width : 3000 mm,
Dimensions : 8900 mm x 2970 mm x 2880 mm,
Weight : 57 Ton.
 
  19
IDMA30097
MakeVerrina
ModelCLS3/110-4580
YOM1978
ConditionGood Condition
PhotoSee Photo
Working length : 4580 mm,
The maximum width of sheet of : 4500 mm,
Diameter of the top it is shaky : 1100 mm,
Diameter of the bottom it is shaky : 650 mm,
(A support with 1 complete set Disputable rollers in diameter 300мм)
Unchangeable distance between,
Bottom : 950 mm,
The maximum distance between Top bottom : 270 mm,
A course downwards the top it is shaky : 400 mm,
Horizontal moving,
Bottom in two parties,
From average position of : 300 mm,
Vertical loading on Top those : 2700 mm,
Vertical loading on Bottom : 1900 mm,
Adjusting capacity :-
For rotation : 400 hp,
For moving top
It is shaky : 120,
For moving of the bottom 60 нр,
The general adjusting capacity Cars : 605 hp,
Approximate weight of the car of : 330,000 kg.
The sizes of sheet at the cold and to an edge with,
Fluidity limit 35kg/mm2,
Width of : 4500 mm,
Minute internal diameter : 1600 mm,
Direct edge of an edge of : 150 mm,
A thickness of sheet of : 90 mm,
The sizes of sheet at the hot and edges with,
Limit of fluidity of : 12 kg/2 mm,
Width of : 4500 mm,
Minute internal diameter : 1400 mm,
Direct edge of an edge of : 175 mm,
A thickness of sheet : 120 mm.
The car intends for are flexible with preliminary edges cylindrical and for ovality after welding of
longitudinal seams.
 
  20
IDMA29677
MakeVerrina
Model3/110x4580
YOM
ConditionGood Condition
PhotoSee Photo
Working length of rolls: 4580 mm,
The maximum width of a leaf: 4500 mm,
Diameter of the top roll: 1100 mm,
Diameter of the lower roll: 650 mm,
(a support with one set of basic rollers of D - 300 mm)
Unchangeable distance between the lower rolls – 900 mm
The maximum distance between top and lower rolls – 270 mm
The course down the top roll – 400 mm
Horizontal moving of the lower rolls to two parties from average situation – 300 mm
Speed of submission of the sheet – 2,2 – 3,3 – 5,5 m / 1’
Speed of rise and lowering of the top roll – 3 – 4,5 mm / 1"
Speed of movement of the lower rolls – 4,5 – 7 mm / 1"
Vertical load of the top roll – 2700 hardware
Vertical load of the lower roll – 1900 t
A torque of each lower roll – 100.000 kg/m
The general torque of the lower rolls – 200.00 kg/m
Adjusting power:
For rotation – 400 HP
For movement of each roll – 120 HP
For movement of the lower rolls – 60 HP
For additional operations – 25 HP
The general adjusting power of the car – 605 HP
The approximate weight of the car – 330.000 kg
The leaf sizes at the cold are flexible also to an edge podgibka with a limit of the fluidity of 35 kg/mm2:
- Width – 4500 mm
- The minimum internal diameter of the feedwell – 1400 mm
- Direct edge of an edge – 145 mm
- Leaf thickness – 80 mm
The leaf sizes at the cold are flexible also to an edge pre-bending with a limit of the fluidity of 35 kg/mm2:
- Width – 4500 mm
- The minimum internal diameter of the feedwell – 1600 mm
- Direct edge of an edge – 150 mm
- Leaf thickness – 90 mm
The leaf sizes at a hot bending and a pre-bending of an edge with a limit of the fluidity of 12 kg/mm2:
- Width – 4500 mm
- The minimum internal diameter of the feedwell – 1400 mm
- Direct edge of an edge – 175 mm
- Leaf thickness – 120 mm
- Each lower roll is given directly from the three-speed hydraulic engine (the patent of Verina firm).
- The top roll moves from hydraulic cylinders and copes from the control panel (the initial and final provision of speed).
- The top roll for delivery of the bent feedwell turns in inclined situation, the drive hydraulic computer-controlled from the panel.
- Horizontal movement of the lower rolls from the hydraulic drive operated from the panel, and the index of situation.
- Pre-bending of edges without the return movement of a leaf.
- All devices of control and management are on one panel.
- The machine is made of high-quality material.
- Easy servicing and leaving.
 
  21
IDMA29432
MakeTos Czech
ModelXZMC8000X27
YOM1954
ConditionGood Condition
PhotoSee Photo
Nominal Rated Capacity: 8000 mm x 27 mm
Maximum strength of a bending sheet 70 kg/mm2
Min bending diameter 300 mm
Number Of Rolls: 4
Bending Speed: 4 m/min
Diameter Of Top Roll: 750 mm
Diameter of Side Roll: 580 mm
Diameter of Lower Roll: 580 mm
Rolls drive motor power 75kW
Machine weight 166,6 ton
 
  22
IDMA29395
MakeSertom
Model
YOM1996
ConditionGood Condition
PhotoSee Photo
Electric hydraulic 3 roll plate roller ,cap
3450 mm x 8.5 mm,
Upper roll diameter: 252 mm,
Down 2 rolls diam 225 mm,
With top support,
 
  23
IDMA29299
MakeSertom
ModelEMO30-30
YOM
ConditionGood Condition
PhotoSee Photo
Useful Length : 3100 mm,
Top Roll Diam : 440 mm,
Side Rolls : 390 mm,
Power : 36 kw,
Dimentions : 600 cm × 263 cm × h. 210 cm,
Weight : 21000 kg.
Machine Capacity :-
Calculated on a yield strength 260 N/mm2, Tensile strength 400 N/mm2,
Pre-Bending Capacity :
Max working plate width : 3000 mm,
Pre-bending thickness (at 1.5 times top roll) : 24 mm,
Pre-bending thickness (at 5 times top roll) : 30 mm.
ROLLING CAPACITY :-
Max working plate width : 3000,
Rolling thickness (at 1.5 times top roll) : 36 mm,
Rolling thickness (at 5 times top roll) : 40 mm.
 
  24
IDMA28086
MakeChinese
ModelW11S-150x2500
YOM
ConditionBrand New
PhotoSee Photo
Upper roll pressure: 1850 ton,
Max capacity of coiled board: σs≤245 Mpa,
Max width of roll board: 2500 mm,
The length of working rolls: 2600 mm,
Max.bending thickness: 150 mm,
Max. pre-bending thickness: 130 mm,
Min diameter can be roll: 3000 mm,
Up roll diameter: 980 mm,
Down roll diameter: 600 mm,
Support roller diameter: 600 mm,
Distance between two down rolls: 1120 mm,
Number of support rolls: 1 group 4pcs,
Drive speed: about 3.5 m/min,
Main motor: 2-75 KW,
Hydraulic motor: 55 kw,
Moving motor: 37 kw,
1. Quantity of remain catheter≤2.9 times of plate thickness.
2. Bending precision, roundness, linearity, ends surface error all less than 3 mm/M.
 
  25
IDMA27984
MakeChinese
ModelW11S-120x4000
YOM
ConditionBrand New
PhotoSee Photo
Upper roller adding pressure: 1850 ton,
Max. width of roll board: 4000 mm,
The length of working rolls: 4100 mm,
Max. thickness of plate bending: 120 mm,
Max. thikness of plate pre bending: 100 mm,
Min.diameter can be rolled: 4000 mm,
Up roll diameter: 960 mm,
Down roll diameter: 560 mm,
Distance between two down rolls: 1080 mm,
Support roll: One group four pieces,
Drive speed: about 3,
Max capacity of coiled board:σs≤245,
Main motor: 2*75 kw,
Hydraulic motor: 55 kw,
Moving motor: 37 kw
 
  26
IDMA27917
MakeChinese
ModelW11S-100×4000
YOM
ConditionBrand New
PhotoSee Photo
Upper roll pressure : 1500 ton,
Max capacity of coiled board : σs≤245Mpa,
Max width of roll board : 4000 mm,
The length of working rolls : 4100 mm,
Max bending thickness : 100 mm,
Max pre-bending thickness : 90 mm,
Min diameter can be roll : 4000 mm,
Up roll diameter : 900 mm,
Down roll diameter : 520 mm,
Support roller diameter : 520 mm,
Distance between two down rolls : 1000 mm,
Number of support rolls : 1 group 4 pcs,
Drive speed : about 3.5 m/min,
Main motor : 110 kW,
Hydraulic motor : 55 kW,
Moving motor : 22 kW.
 
  27
IDMA27899
MakeChinese
ModelW11S-110X4000
YOM
ConditionBrand New
PhotoSee Photo
Capacity: 1600 ton,
Max. rolling width: 4000 mm,
Max. rolling thickness: 110 mm,
Upper roller diameter: 920 mm,
Bottom roller diameter: 520 mm,
Pre bending: T85 x B4000 x min dia 4000,
Central banding: T110 x B4000 x dia min 4000,
2 bottom rollers centre distance: 1000 mm,
Rolling speed: about 4 m/min,
Roller number: 4 pcs,
Main motor power: 2 x 55 kw,
Hydraulic motor power: 55 kw,
Travel motor power: 30 kw,
Plate tensile strength: 245 Mpa,
main electronic elements: siemens.
 
  28
IDMA27897
MakeChinese
ModelW11S-90x4000NC
YOM
ConditionBrand New
PhotoSee Photo
Capacity : 1600 tons,
Max rolling width : 4000 mm,
Max rolling thickness : 90 mm,
Upper roller diameter : 860 mm,
Bottom roller diameter : 480 mm,
Pre-bending : T70 x B4000 x dia min 3000,
Central banding : T90 x B4000 x dia min 3000,
2 rollers centre distance : 920 mm,
Rolling speed : 3.5 m/min,
Roller number : 4 pcs,
Main motor power : 110 kW,
Hydraulic motor power : 45 kW,
Travel motor power : 22 kW,
Plate tensile strength : 245 Mpa,
NC system main electronic elements Siemens.
Programmable displayer Taiwan,
PLC Omron.
 
  29
IDMA27597
MakeDavi
ModelIT4R-30E
YOM
ConditionGood Condition
PhotoSee Photo
4 rolls with pre-bending,
Maximum thickness : 30 mm,
Maximal thickness to pre-bend : 25 mm,
Maximum length : 3050 mm,
Diameter of top roll : 450 mm,
Diameter of side rolls : 400 mm,
Variable speed,
Motor 40 cv,
Dimensions : 6300 x 2600 x 2500 mm,
Approximate weight : 30000 kg.
Separate control unit.
Conical bending.
 
  30
IDMA27596
MakeJammes Promecam
Model140-3020
YOM
ConditionGood Condition
PhotoSee Photo
Maximum thickness : 20 mm,
4 rolls with pre-bending,
Maximum length : 3040 mm,
Diameter of top roll : 400 mm,
Side rolls diameter : 320 mm,
Roll bending speed : 0 à 5 m/mn,
Motor of the hydraulic group : 25 cv,
Tightening motor : 2 cv,
Hydraulic control oui,
Dimensions : 5720 x 1600 x 1520 mm,
Approximate weight : 20000 kg.
Hydraulic lift the upper roll :-
Thickness 1000 mm higher than 28 mm.
Thickness of 23 mm to 2000 mm higher.
Thickness 3000 mm higher than 20 mm.
 
  31
IDMA27533
MakeFaccin
ModelHAV3575
YOM2009/10
ConditionGood Condition
PhotoSee Photo
3 Rolls variable geometry
Useful length: 3500 mm,
Rolling: 85 mm,
Pre bending: 60 mm,
Top roll: 740 mm,
Side rolls: 660 mm,
Kw 110,
Size: 9500 x 3600 x h.4400 mm,
Weight: 106000 kg,
Capacity 260N/mm2
Rolling: 3500 W x 3600 ID x 85 mm,
Pre bend: 3500 W x 3600 ID x 60 mm,
Rolling: 1750 W X 3600 ID x 105 mm.
 
  32
IDMA27353
MakeFroriep
ModelUDBH-HY3200x35
YOM1962
ConditionGood Condition
PhotoSee Photo
Width of plate : 3200 mm,
For edge setting at full width of plate : 32 mm,
For bending at full width of plate : 35 mm,
Diameter of rollers : top roller 550 mm,
Bottom rollers (supported) : 330 mm,
Smallest possible bending diameter on top,
Roller at 30 mm plate thickness : 650 mm,
Number of rollers three,
Driven rollers two (bottom rollers),
Operating speed : 7,2 m/min,
Installed power roller drive : 45 kW,
Other functions : 12 kW,
Weight of the machine : appr. 50 t.
 
  33
IDMI6057
MakeFomp
Model
YOM
ConditionGood Condition
PhotoSee Photo
width : 2600 mm,
Thickness : 40 mm,
4 Roll with Pre Pinch,
Top Roll : 420 mm,
Bottom roll : 380 mm,
Machine Weight : Approx 42 ton.
 
  34
IDMA26812
MakeFaccin
ModelHAV3145
YOM2010
ConditionExcellent condition,under power
PhotoSee Photo
Maximum rolling capacity : 3 m x 45 mm at 5 x top roll diameter
3 m x 35 mm at 1.4 x top roll diameter
Maximum prebending : 3 m x 20 mm at 1.4 x top roll diameter,
machine weight : 26 tons,
Drive power : 44 HP,
Completer with adjustment plate support arm,
Hydraulic side support arm,
Cone rolling,
Bottom roll braking ti increase pre bend accuracy,
NC Control,
Induction hardened rollers
 
  35
IDMA26597
MakeHerkules
ModelDPA5
YOM1976
ConditionGood Condition
PhotoSee Photo
Capacity : 2000 x 27 mm,
Pre-Bending : 12 mm,
Roll diameter : 250 mm,
Overall sizes : 5000 x 1500 x 1500 mm.
 
  36
IDMA26585
MakeTos Czech
ModelXZMP3150/10
YOM1975
ConditionGood Condition
PhotoSee Photo
Sheet width : 3150 mm,
Plate thickness : 14 mm,
Pre-bending : 10 mm,
sheet thickness : 500 mm,
Upper roll diameter : 360 mm,
Lower roll diameter : 360 mm,
Total power requirement : 56 kW,
Range L-W-H : 7,10 x 1,90 x 1,80 mm,
Weight of the machine : 21,5 t.
 
  37
IDMA26583
MakePiesok / Unicorn
ModelXZCT3000/16
YOM1991
ConditionGood Condition
PhotoSee Photo
Sheet width : 3000 mm,
Plate thickness : 22 mm,
Pre-bending : 16 mm,
Upper roll diameter : 420 mm,
Lower roll diameter : 405 mm,
Total power requirement : 24 kW,
Range L-W-H : 5,81 x 2,15 x 2,16 mm,
Weight of the machine : 21,8 t.
 
  38
IDMA26581
MakeSchafer
ModelSRMV
YOM1970
ConditionGood Condition
PhotoSee Photo
Sheet width : 2500 mm,
Plate thickness : 20 mm,
Pre-bending : 15 mm,
Upper roll diameter : 350 mm,
Lower roll diameter : 330 mm,
Min bending diameter : 420 mm,
Work speed : 5 m/min,
Adjustment speed : 80 mm,
Total power requirement : 36 kW,
Range L-W-H : 5,60 x 2,34 x 2,72 mm,
Weight of the machine : 18 t.
 
  39
IDMA26347
MakeChinese
ModelW11S100x3000
YOMBrand New
ConditionBrand New
PhotoSee Photo
Force pressure : 1400 ton,
Max. width : 3000 mm,
Working length of roller : 3100 mm,
End bend with max. thickness : T80 x 3000 x dia 3000 mm,
Central bend with max. thickness : T 100 x 3000 x dia 3000 mm,
Balance length when full load : 2-3 times of plate thickness,
Upper roller diameter : 860 mm,
Lower roller diameter : 480 mm,
Central distance of two lower rollers : 920 mm,
Rolling speed : about 4 m/min,
Upper roller pressing speed : about 95 mm/min,
Main motor power : 110 KW,
Hydraulic power : 45 KW,
Moving motor power : 22 KW,
System pressure : 20 Mpa.
 
  40
IDMA26331
MakeChinese
ModelW11S100x3000
YOMBrand New
ConditionBrand New
PhotoSee Photo
Upper roller adding pressure : 1350 tons,
Max width of roll board : 3000 mm,
The length of working rolls : 3100 mm,
Max thickness of plate : 100 mm,
Max thickness of plate pre-bending : 80 mm,
Min diameter of full loading : 2500 mm,
Up roll diameter : 860 mm,
Down roll diameter : 480 mm,
Distance between two down rolls : 920 mm,
Support rolls : one group,
Drive speed : about 4.0 m,
Hydraulic motor : 45 kW,
Driving motor : 110 kW,
Moving motor : 22 kW.
Machine Weight : 150 tons.
Delivery time is 100 days.
 
  41
IDMA26178
MakeKorea
ModelCIMBR3-65Tx3100L
YOM
ConditionBrand New
PhotoSee Photo
Max bending width : 3100 mm,
Max bending thickness : 65 mm,
Min bending thickness : 9 mm,
Tensile strength : 530 Mpa,
Yield point : 350 MPa,
Edge bending thickness (cold) : 55T x W3150 mm,
Top roll diameter : 680 mm,
Bottom roll diameter : 580 mm,
Bending speed : 3.1/4.0 m/min,
Max working pressure : 250 kgf/cm2,
Main Cylinder :-
Power : 706 x 2 sets = 1413 ton,
Diameter : 540 mm,
Stroke : 550 mm,
Bottom roll distance : 880 mm,
Main roll driving electric motor and Sub electric motor : 150 Hp (110Kw)-6P-60Hz,
Operating method hydraulic PLC operation,
Operating control Push button,
Roller move system digital scale 4 Ea,
Oil tank capacity : 1800 litter,
Oil cooler : 300 litter,
Dimensions (L x W x H) : 8900 x 3460 x 4480 mm,
Weight of the machine : 71 ton.
 
  42
IDMA26177
MakeKorea
ModelCIMBR3-65Tx2500L
YOM
ConditionBrand New
PhotoSee Photo
Max bending width : 2500 mm,
Max bending thickness : 65 mm,
Min bending thickness : 8 mm,
Tensile strength : 480 Mpa,
Yield point : 350 MPa,
Edge bending thickness (cold) : 55T x W2500 mm,
Top roll diameter : 640 mm,
Bottom roll diameter : 580 mm,
Bending speed : 3.1/4.2 m/min,
Max working pressure : 250 kgf/cm2,
Main Cylinder :-
Power : 572 x 2 sets = 1145 ton,
Diameter : 540 mm,
Stroke : 510 mm,
Bottom roll distance : 860 mm,
main roll driving electric motor and sub electric motor : 150 Hp (112Kw)-6P-60Hz,
Operating method hydraulic PLC operation,
Operating control Push button,
Roller move system digital scale 4 Ea,
Oil tank capacity : 1800 litter,
Oil cooler : 300 litter,
Dimensions (L x W x H) : 8300 x 3150 x 4190 mm,
Weight of the machine : 58 ton.
 
  43
IDMA26125
MakePullmax
ModelPV7H917-8
YOM1984
ConditionGood Condition
PhotoSee Photo
Maximum Bending Capacity : 62.5 mm x 2400 mm
Cone Bending Capacity : 1 3/16” x 8’,
Diameter of Bending Rolls : 21 5/8”,
Roll Length : 108”,
Main Motor : 84 HP,
Power Requirements : 3/60/575V,
Dimensions (LxWxH) : 215” x 114” x 127”,
Shipping Weight : 102,300 lbs,
Equipped With :-
Cone Bending Attachment,
Longitudinal Groove for Plate Alignment,
Hydraulic Tilting End Yoke,
Manuals & Foundation Drawings,
Speed Steplessly Adjustable,
Capacity ratings based on 40,000psi yield.
 
  44
IDMA25999
MakeStoelting
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max bending capacity : 2500 mm and 45 mm,
Length : 2500 mm,
Upper roll diameter : 510 mm,
Diameter of lower rolls : 460,
Main motor : 74 kW,
Setting motor : 15 kW,
Net weight : 25 ton.
 
  45
IDMA25704
MakeFroriep
Model
YOM1960 / Overhauled 1992
ConditionGood condition,under power
PhotoSee Photo
Size : 3000 x 80 mm / 1000 x 120 mm,
Pre-bending : 45 mm,
Upper roll Dia : 610 mm,
Lower roll Dia : 500 mm,
Machine Weight : 100 Tons
With new spare parts (worth Euro 40,000),
New Hydraulic feeding for tools has been installed in 2009.
 
  46
IDMA25160
MakeVoest
ModelDWB4000
YOM1970
ConditionGood Condition
PhotoSee Photo
Sheet width : 4000 mm,
Plate thickness : 60/100 mm,
Thickness : pre bendin : 45 mm,
Diameter of upper rools : 860 mm,
Bottom roll diameter : 500 mm,
Bending speed : 4,5-6,6 m/min,
Fed : 121 kw,
Total power requirement : 220 kw,
Weight of the machine ca : 125 t,
it is dispense of the material.
60 mm steal,
100 mm max after you make the steal warm.
 
  47
IDMA25045
MakeMGsrl
ModelMG3130
YOM
ConditionBrand New
PhotoSee Photo
Overall length of rolls 3100 mm
top roll 940 mm
lower rolls 880 mm
power electric installed HP 200
Capacity rolling plate thickness 130 mm on plate yield 48000Psi
thickness pre-bending 110 mm
thickness rolling up to 150 mm on plate yield 36000Psi
complete configuration with rolls hardened 55Hrc
-3 rolls powered individually driven
-conical bending attachment -digital reading -
Dimensions 7945 x 4740 x H 5120
weight 155 Ton.
 
  48
IDMI5766
MakeF.Griggio
Model
YOM
ConditionGood Condition
PhotoSee Photo
Upper roll dia : 480 mm,
Bottom roll dia : 375 mm,
Length of roll : 3000 mm,
Capacity of plate roll : 50 mm,
Equipped with :
Side pipe and angle R.
 
  49
IDMI5637
MakeTos Czech
Model
YOM
ConditionGood Condition
PhotoSee Photo
Thickness- 40 mm, Width- 3000 mm, 35 mm x 3150 mm
 
  50
IDMA22860
MakeMGsrl
ModelAK330
YOM
ConditionBrand New
PhotoSee Photo
3 Roll hydraulic plate bending machine dual-pinch pyramid plate pre-Bending -hydraulic technology.
Rated capacity:
width of plate 3000 mm,
thickness of plate rolling 30 mm,
pre-bending plate thickness 25 mm,
rated capacity on plate yield of 255N/mm2,
rolls dimensions:
surface length 3100mm,
upper roll diameter 400mm,
lower rolls diameter 380mm,
rolls hardened 54Hrc,
digital readout of rolls bending position ,
hydraulic drop-end machine opening,
electric power 25Hp,
3 rolls driven hydraulic motorized independent each one with axial planetary gear,
centralized hydraulic unit with double pumps for simultaneous operations,
the three rolls installed on self aligning double crown floating barrel bearing,
greasing free technology with sealed bearings and self lubricated bushings,
centralized control panel for easy one man operation,
safety devices in compliance with European regulation CE-.
Additionaa accessories : Conical attachment @ Euro 3,750/-.
 
  51
IDMA22859
MakeMGsrl
ModelAK332
YOM
ConditionBrand New
PhotoSee Photo
Top roll 410 mm,
lower rolls 370 mm,
hardening of the 3 rolls,
3 rolls driven hydraulic individual,
conical attachment,
digital readout,
hydraulic dropend,
dual speed rotation,
total electric 25 hp,
weight 19 tons.
3100 x 32 mm / 25 mm Prebending.
 
  52
IDMA21842
MakeMG
ModelAK2565
YOM2005
ConditionGood Condition
PhotoSee Photo
Rolls length 2600 mm,
Top roll 530 mm,
Lower rolls 500 mm,
Power electric 44 Kw 380 Vac, 50 Hz.,
Capacity bending thickness 65 mm,
Plate with yield strength 265 N/mm2,
Pre-bending plate thickness 50 mm,
Installed configuration:
Rolls made from forged alloy steel, hardened to 55 Hrc,
Conical bending attachment,
Digital reading of side rolls,
3 rolls driven fully hydraulic with individual gear box axial and hydro-motor for each roll.
Parallelism with torsion bar, greasing free technology with sealed bearings, rolling speed up to 4,5 mtr/min.
Hydraulic automatic speed compensation between rolls and plate, overload hydraulic protection, European safety norm, CE mark.
Overall dimensions: 5,578mm Long x 2,455mm Wide x 2,658mm high (Flat Rack or Break-bulk Required for Shipping).
 
  53
IDMI5529
MakeBacketmans(Kumla)
Model
YOM
ConditionGood Condition
PhotoSee Photo
3 Roll Plate Bending Machine,
Job capacity 30 mm,
Job length 2500 mm,
Upper roll dia. 370 mm,
Lower roll dia. 370 mm
 
  54
IDMA21735
MakeBronx
Model
YOM
ConditionGood Condition
PhotoSee Photo
3-Roll Hydraulic Plate Bending Roll,
Top roll dia. : 813 mm,
Length : 3200 mm,
Hot capacity : 200 mm,
Cold capacity : 130 mm,
 
  55
IDMA21660
MakeMGsrl
ModelAK350
YOM2007
Conditioncan be inspected under power
PhotoSee Photo
Plate thickness 50mm,
Plate width 3000mm,
Pre-bending thickness 40mm,
Plate yield 255 Mpa,
Top roll 510mm,
Side rolls 490mm,
3 driven rolls hydraulic motorized,
Rolls hardened high resistance scratchproof,
Digital position readout of lower bending rolls for accuracy plate forming,
Conical bending attachment with hardened sliding roller for cone plate forming,
Hydraulic drop-end,
Vertical support 800/2800,
(2) Side supports double arm 5 ton,
Complete electro-hydraulic control from mobile console,
Pre-pinch pressure adjustable for pre-bending rolls deflection,
Rolls installed on bearings with permanent sealed greasing.
Safety devices in compliance with European regulation.
 
  56
IDMA21637
MakeMGsrl
Model3R32.520Z
YOM
ConditionBrand New
PhotoSee Photo
3-Roll Double Pinch Plate Bending Hydraulic Machine,
Top roll dia. 1400 mm,
Side rolls dia.1200 mm,
Installed power 600 Hp.,
Working length 3200 mm,
Max. rolling thickness 230 mm,
Max. pre-bend thickness 195 mm,
 
  57
IDMA21626
MakeMGsrl
ModelMH365
YOM
ConditionBrand New
PhotoSee Photo
Pre-bending thickness 50 mm on yield strength 310 Mpa mean having a roller at least rated 65 mm.
3000 x 65 mm 4 roll double pinch,
With this machine you can go down ID 2520 mm with 50 mm thickness pre-bending.
Rolling capacity is 65 mm thickness,
Reducing width to 1500 mm the bending thickness increase up to 80 mm,
Top roll is 630 mm. Smallest pre-bending ID 700 mm with thickness 28 mm.
Machine complete with accessories ready to work.
Rolls hardened, digital readout, conical attachment.
Delivery time in October 2012.
 
  58
IDMA21622
MakeMGsrl
ModelMG3130V
YOM
ConditionBrand New
PhotoSee Photo
Top roll 940 mm,
Lower rolls 880 mm,
Power electric 200 Hp,
Dimensions 7945 x 4740 x H 5120,
Weight 185 Ton.
Machine rated on yield strength 48,000 PSI. (Equivalent to capacity of 150mm on plate yield of 36,000 PSI)
Complete with:
Rolls hardened,
3 rolls individual driven,
Conical bending attachment,
Digital Readouts.


 
  59
IDMA21591
MakePicot
ModelCRH3025
YOM1980
ConditionVery good condition
PhotoSee Photo
Sheet width : 3050 mm,
Plate thickness : 25 mm,
Pre-bending : 20 mm,
Upper roll diameter : 380 mm,
Lower roll diameter : 380 mm,
Range L-W-H 5,40 x 2,10 x 2,50 m,
Weight of the machine : ca. 19,7 t.
 
  60
IDMA21542
MakeCUG Cluj,Romania
ModelMRT80 x 4000
YOM1990
ConditionGood Condition
PhotoSee Photo
Plate width 4000 mm
, Plate thickness 80 mm
, Minimum diameter of rolled plate 1400 mm
Max stroke of pressing roll 300 mm
, Max stroke of curving roll 899 mm
Angle of tilting 67 degree
Installed power 425KW
Max. diameter of upper roll 1025 mm
Max diameter of pressing roll 986 mm
Max diameter of curving roll 858 mm
Size of machine 13550 x 3168 x 4670mm ,
Total weight of the machine 291 tons
 
  61
IDMA21529
MakeWMW,Germany
ModelUBBDA60 x 4500
YOM
ConditionGood Condition
PhotoSee Photo
60 x 4500 mm, weight 171 tons.
 
  62
IDMA21126
MakeVerrina
ModelCSL3/110 x 4580
YOM1983
ConditionGood Condition
PhotoSee Photo
3 Rolls .
Working length of rolls 4580 mm,
Max. width of plate 4500 mm,
Upper roll diameter 1100 mm,
Lower roll diameter 650 mm,
Distance between lower rolls 950 mm,
Max. distance between upper and lower rolls 270 mm,
Down travel of upper roll 400 mm,
Horizontal travel of lower rolls to both sides from middle position 300 mm,
Plate feeds, m/1'''' : 2.2-3.3-5.,
Up and down speed of upper roll 3-4.5 mm/sec,
Speed of lower rolls 4-5.7 mm/sec,
Vertical force on upper roll 2700 ton,
Vertical force on lower rolls: 1800 ton,
Allowed angle for upper roll: 3 degree 30"
Total power: 605 HP,
Machine weight: 330 ton,

Dimensions of plate with cold bending and pre bending with material fluidity 35kg/sq.mm
plate width: 4500 mm
min. inside diameter of cowling: 1400 mm
straight edge: 145 mm
thickness: 80 mm


Dimensions of plate with cold bending and pre bending with material fluidity 35kg/sq.mm,
plate width: 4500 mm,
min. inside diameter of cowling: 1600 mm,
straight edge: 150 mm,
thickness: 90 mm,

Dimensions of plate with hot bending (700-750 C) and pre-bending for material
fluidity 12kg/sq.mm :
plate width: 4500 mm
min. inside diameter of cowling: 1400 mm
straight edge: 175 mm
thickness: 120 mm

Dimensions of plate with cold bending of conical cowling and pre bending with material
fluidity 26kg/sq.mm
cone length: 2100 mm
cone thickness: 60 mm
min. inner cone diameter:1650 mm
max. inner cone diameter: 3000 mm

The machine do pre bending from the both sides of plate

Dimension on foundation drawing:
A: 14200 mm F: 6200 mm
B: 5600 mm G: 3000 mm
C: 4400 mm H: 5000 mm
D: 3650 mm I: 2630 mm
E: 10200 mm L: 4280 mm.
For bending and pre-bending of edge of cylindrical and conical cowling, and straightening of locality after welding,
Weight 330 tons.
 
  63
IDMA20805
MakeEvoroll
Model25T700
YOM
ConditionBrand New
PhotoSee Photo
Useful rolls length 2500 mm,
Top roll diameter 630 mm,
Side rolls diameter 540 mm,
Max. opening between top and side rolls 235 mm,
Inclination of the top roll ±10 mm,
Inclination angle of the side rolls 2° gradi,
Working height from the side rolls to ground 1700 mm,
Max thrust of top roll 7000 KN,
Total installed power 105 kW,
Roll rotation speed (slow – fast)2,5- 5 m/1’,
Top roll positioning speed 200-600 mm/1’,
Side rolls positioning speed 150-500 mm/1’,
Voltage / frequency / phases 400/50/3 V/Hz/ph,
Dimension 700x370x325 cm.,
Machine weight 61 Tons.
 
  64
IDMA20672
MakePiesok,Slowakia
ModelXZMP3150/16
YOM
ConditionGood Condition
PhotoSee Photo
3-cylinder, cylinder diameter 350 mm ,
Max. hr. sheet with predohyb. 16mm
Max. hr. sheet with curling 24 mm
Min. average corners. plate 600 mm
Min. average corners profile 1500 mm
Max. profile angle. 140 x 140 x 12 mm
Weight 37 tons.
 
  65
IDMA20324
MakeRussian
Model
YOM
ConditionGood Condition
PhotoSee Photo
upper and lower roll dia.450 mm,left and right roll 330 mm,electric cabinet must be changed,weight 32 t
 
  66
IDMA20323
MakeRussian
Model
YOM
ConditionGood Condition
PhotoSee Photo
4 rolls,prebending,mechanical,3000×30 mm,upper roll dia500 mm,left and right 380 mm,weight 36 t,packed in 2×40''
 
  67
IDMA19977
MakeManassero,Italy
ModelMG3125V
YOM
ConditionBrand New
PhotoSee Photo
36 Rolls Double Pinch,
Installed power : 220 HP,
Top roll dia. : 940 mm,
Side roll dia. : 840 mm,
Capacity :
working length : 3100 mm,
Max. rolling thickness 130 mm,
Max. pre-bend thickness 110 mm,
Machine Size :
Width 4530 mm,
Total length : 9200 mm,
Working height : 4200 mm,
weight : 130000 kg.,
Side Roll Force against T. R. 2400 Tons,
Total torque (DaN) 85000 kg.
Materials :
Rolls 42CrMn 4 Forged Steel,
Hardening 56 – 59 HRC.
Standard Equipment :
Hardening rolls,
Digital readouts ( ea. axs ),
Conical bending system,
Titanium Heat exchanger,
One year spare parts,
Starting up and commissiong.

 
  68
IDMA19891
MakeFaccin
Model4HEL
YOM2001
ConditionExcellent
PhotoSee Photo
4 roll double pinch 3000 x 42 mm
, 3149 3000 x 42 mm
Top roll 490 mm dia. Pinch roll 490 mm dia. Side rolls 370 mm
Machine fully hydraulic operated.
All accessories installed:
Rolls hardened high resistance
Conical bending attachment
Digital position readouts
Additional accessories installed:
(1) central support hydraulic operated 2 ton
(1) side support hydraulic operated
Dimensions 2500 x 6200 mm x H 2500 mm
Weight 35 Ton + 4 ton the vertical support + 4 ton the side support
 
  69
IDMA19890
MakeHaeusler
ModelVRMHY1000/12
YOM1973
ConditionGood Condition
PhotoSee Photo
4-roll plate bending rolls,Capacity rolling 1000 x 16 mm,
Capacity pre-bend 1000 x 12 mm,
Top/bottom roll diameter 225 mm,
Side rolls diameter 160 mm,
Rolling speed 4m/min,
Main motor 15HP,
Machine dimensions 4100 x 1820 x 1900 mm,
Machine weight 8 tons.
 
  70
IDMA19782
Make
Model3150x70
YOM1979
ConditionGood Condition
PhotoSee Photo
Sheet metal length - 3150 mm, Sheet metal thickness - 70 mm, Pre-bending capacity - 40 mm, Top roll diameter - 600 mm, Bottom roll diameter - 520 mm, Side rolls diameter - 450 mm, Main power - 80 kW, Weight approx. - 65 ton.
 
  71
IDMA19665
MakeVoest
ModelDWB4000/58
YOM1970
ConditionGood Condition
PhotoSee Photo
Max. plate width - 4000 mm, Max. plate thickness, rolling (cold)- 60 mm, Max. plate thickness, warm - 100 mm, Max. plate tickness, prebending (cold) - 45 mm, Bending speeds - 4,5 and 6,5 m/min., Length of rolls - 4200 mm, Bottom rolls (2) diameter - 500 mm, Top roll diameter - 860 mm, Bottom adjut motors - 2 x 12 HP and 2 x 75 HP, Main drive - 85 HP / 380 V, Weight of the machine approx. - 125 tons.
 
  72
IDMA19130
MakeHungary
Model
YOM
ConditionGood Condition
PhotoSee Photo
25mm x 5000mm capacity
 
  73
IDMA19112
MakeHungary
Model
YOM
ConditionGood Condition
PhotoSee Photo
Roll Bending Machine 25x5000
Max. Leght to Bend 5000 mm.
Max. Bending Cap. 25 mm.
No. of rolls 3
 
  74
IDMA18609
MakeGrivita Rosie,Romania
ModelG30
YOM
ConditionGood condition,under power
PhotoSee Photo
2500 x 30 mm
 
  75
IDMA18495
MakeFroriep
Model
YOM1981
ConditionGood Condition
PhotoSee Photo
Sheet thickness for bending: 50 mm,
Sheet width: 4000 mm,
Diameter exceeding: 720 mm,
Diameter below: 550 mm,
Distance between supports: 1400 mm,
Main motor: 125 kW,
Machine weight: 92 ton.
 
  76
IDMA18189
MakeLisse
ModelCFH 2031.5
YOM
ConditionGood Condition
PhotoSee Photo
4 Rolls, Capacity 3150 x 25mm,
Roll dia upside 400 mm,
Roll dia under rolls - side rolls 500/400/315 mm,
Traction (seprated Y/N)+ number : 4 separate,
Power needed 30 CV,
Weight 23000 kg.,
Cap-possibility to Yes.
 
  77
IDMA17779
MakeBoldrini
Model
YOM
ConditionGood Condition
PhotoSee Photo
2550 x 60 mm
,

Nr of rolls 3,
Max 60 mm ,
Diameter min. bending 800 mm ,
Diameter of up roll 615 mm ,
,
Diameter down rolls 610 mm ,
Weight 58 tons,
Length 9300 mm ,
Large 2700 mm ,
New electrical panel ,
Dispositive for conical bending .

 
  78
IDMA17746
MakeSchafer
ModelSRMVS4074
YOM1976
ConditionGood Condition
PhotoSee Photo
4 Rolls - 30/2200 mm,
Main motor output 90 kW.
Dimensions: 2800x6300x3000 mm,
Hydraulic agregat: Rex-Roth (2500x3000x2000 mm),
Machine weight: 37 T + 4 spare rollers,
Roller: Ø330, Ø300 mm.
 
  79
IDMA17648
MakeFroriep
Model
YOM
ConditionVery good condition
PhotoSee Photo
3 Roll bending machine , thickness 50-150 mm, width 2500 mm
 
  80
IDMA17456
MakeHesse
ModelHSM4
YOM2008
ConditionVery good condition
PhotoSee Photo
bending length 3.000 mm
bending capacity 50,0 mm
prebending capacity 40,0 mm
upper and lower rolls diameter 520 mm
fully hydraulic drive of upper and lower roll
digital read-out of side rolls position
hydraulic releave of upper roll
hydraulic drop-end bearing
moveable control panel
conical bending device
hardened rolls
continous variable rolling speed
top support (max. 6 m)
machine and equipment according to the CE regulations
motor 45,0 + 22,0 kW
weight 41.000 kg + 3.500 kg top support
main dimensions 7.000 x 2.600 x 3.000 mm without top support
transport dimensions machine 6.600 x 2.565 x 3.000 mm + top support 4.300 x 2.200 x 960 mm
important issues at conical bending:
• the max. sheet metal thickness is equivalent to 50 % of nominal capacity
• the cone length can be max. 30 % ore must be more than 60 % of roll length
• hardened rolls are recommended
 
  81
IDMA17054
Make
ModelXZM3000/25
YOM1962
ConditionVery good condition
PhotoSee Photo
working lenght 3000mm,
smallest inside diameter wrench tubes 500mm,
average upper cylinder 410mm,
average lower smooth-wheeler roller 350mm,
achievement electric motor for drive smooth-wheeler roller 30kW,
achievement electric motor for adjusting upper cylinder 21kW,
achievement electric motor for hydraulic unit 0,8kW,
proportions machinery (dxšxv) 6000x2035x2250mm,
working altitude 800mm,
machine weight 22000kg
 
  82
IDMA17053
Make
ModelXZC3000/25
YOM1963
ConditionVery good condition
PhotoSee Photo
4 rolls, working lenght 3000mm,
average upper cylinder 430mm,
average lower forming rolls 430mm,
average lateral smooth-wheeler roller 340mm,
achievement electric motor for drive smooth-wheeler roller 30kW,
achievement electric motor for adjusting smooth-wheeler roller 11kW,
achievement electric motor for hydraulic unit 0,8kW,
proportions machinery 7030x2560x2600mm,
working altitude 800mm,
machine weight 36000kg
 
  83
IDMA16983
MakeFroriep
Model
YOM
ConditionGood Condition
PhotoSee Photo
4 Rolls, Width : 4000 mm, Thickness : 50 - 87 mm (depending on quality of material), Dia. of upper roll : 720 mm, Dia. of down roll : 550 mm, Dia. of besides rolls : 500 mm, Main Motor : 125 CV, Approx. weight : 92 Tons
 
  84
IDMA16782
MakeWMW,Germany
ModelUBBDA60 X 2500
YOM1985
ConditionGood Condition
PhotoSee Photo
60 x 2500 mm.
 
  85
IDMA16768
MakeFroriep
Model
YOM1968
ConditionGood Condition
PhotoSee Photo
Maximum Bending Capacity 34.375 x 3600 mm,
Maximum Capacity with Pre-Bending 25 x 3600 mm,
Top Roll Bending Force 600 Tons,
Diameter of Top Roll 669.275 mm,
Diamter of Lower Rolls 374 mm,
Bending Speeds 20/33 Ft./Min,
Main Motor 94 H.P,

Equipped With:
Operators Console
3-Roll Configuration
Back-Up Rollers for Lower Rolls
Hydraulic Powered Lower Roll Adjustment
Hydraulic Powered Top Roll Adjustment
Hydraulic Drop End
Plate Support System (Side and Overhead)
75' In-Feeding Power Rollers
 
  86
IDMA16260
MakeStolting Srah
Model
YOM1994
ConditionGood Condition
PhotoSee Photo
4 Roll bending roll hydraulic,
Width 3.000 mm,
Thickness 30 mm with pre bending,
Own weight 24 ton,
Moveable operators panel,
Biggest bending length 6.000 mm,
Dimensions approx 7,5 x 8 x 3,5 m.
 
  87
IDMA16049
MakeChinese
ModelWD11-50x3000
YOM
ConditionBrand New
PhotoSee Photo
Max width 3000 mm, Max thickness 50 mm, Min rolling diameter 2000 mm, Yield limit <245 Mpa, Top roller diameter 580 mm, Bottom roller diameter 480 mm, Center diameter between two bottom roller 750 mm,Rolling speed 5 m/min, Main motor power 20x2.Feature of the machine are as follows: 1) The wo bottom rolls are driven via seperate power system eliminating the mechncal interfearing,and the bearing of the rolls are self allining mill-roll nbearings,with low energy consumption.The require power from the main motor is small,energy saving and environmental protecting. 2)The worm and the gear screw & rod of lifter for up roll ar all imersed in the lubricant oil with excellent lubrication gerat bearing capacity and long life. 3) The standard is assembling type.Which is convenient for installation and maintenance. 4)The turning of turn end is mechanical,convenient and reliable. 5)The single end of the up roll can be lifted for the bending of concylinder via the clutch.
 
  88
IDMA15639
MakeCdw
ModelCdw12nc
YOMNew
ConditionNew
PhotoSee Photo
4-Roll Hydraulic Double Initial Pinch Plate Bending Roll.
Max. Rolling Thickness 130 mm,
Max. Pre-Bend Thickness 120 mm,
Max. Plate Width 3000 mm,
Material Yield Limit 355 Mpa.,
Min. Rolling Diameter 3600 mm,
Top Roll Diameter 1050 mm,
Bottom Roll Diameter 920 mm,
Side Rolls Diameter 700 mm,
Rolling Speed Approx. 3000 mm.p.m (120 IPM),
Hydraulic System work Pressure 18 Mpa,
Total Power 200 kw (267 HP),
PLC Control System OMROM , Japan.
Machine Dimensions Approx. 10.5 M x 4.6 M x 5.0 M.
Delivery Time: 8-Months EX-Factory From P.O. Date.
Warranty: One (1) Year Warranty For Parts.
Payment Terms: 20% with Purchase Order or Contract;
40% on 4th Month from P. O. Date; 40% After the Buyer Signed Acceptance and Before Ex-Factory.
 
  89
IDMA14288
MakeScharringhausen
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 4000 x 40/60 mm, 3 Rolls, Roll dia (Top) : 570 mm, Roll dia (bottom) : 520 mm, Overall dimensions : 9000(L) x 4500 (D) x 3600 (H) mm, Weight : 78 Tons, Lower rolls are individual movable for prebending, Cap: 4000x40 @ rolling Ø 1000 mm, Cap: 2500x60 @ rolling Ø 1000 mm, Cap: 3000x60 @ rolling Ø 2000 mm.

 
  90
IDMA13275
MakeManassero,Italy
ModelMG350H
YOM
ConditionBrand New
PhotoSee Photo
3000x50/40 mm, Conocal bending system, hardened rolls and digital read outs
top