Category : Sheet Metal

Sub-Category : Press Dishing

Total Machines Found : 7

Select | Machine Details
 
  1
IDMA32881
MakeChoil
ModelCIMHP600
YOM2008
ConditionGood Condition
PhotoSee Photo
Table size : 5,500 X 1,500㎜
Day light : 3,000㎜
Pressing capacity : 600 Ton
Working Pressure Max. 220 kg/㎠
Kicker Capacity Max. 10 ton
Stroke of Main Ram up / down : 900mm
right/left : 1700(each) ㎜
360 degree (endless) radius
Down Speed 100㎜/sec
Pressing Speed 4㎜/sec
Up Speed more than 150㎜/sec
Motor 57 / 7.5 Kw
Hyd. Pump (high) 55 cc/rev
Oil Tank 1000 L
Net weight 65 ton
Dimension W*L*H) approx 2,000 * 6,700 * 5,800mm
with supplied Dish/Bending mold set Pluse Hoist (5ton ) set.
shipment : 20' Open Top x 3 ea , 40' Open top x 1 ea .
Packing : simple Packing with Skid,but Cylinder & electrical Cabinet should be wooden packing.
 
  2
IDMA31630
MakeLVD
ModelCN400
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Max force: 400 ton,
Max. pressure: 300 kg/cm2
Between columns: 5000 mm,
Max. stroke slide: 500 mm,
Working speed:
-At max. pressure: 18 mm/sec,
-At min pressure: 9 mm/sec,
Return speed: 200 mm/sec,
Table dimension: 1200 x 1200 mm2,
Daylight: 935 mm,
Between columns: 5000 mm,
Horse power: 50 HP,
Weight: 38 ton,
Dimension (H x W x L): 6100 x 5850 x 1300 mm
 
  3
IDMA29619
MakeChoil
Model
YOM2008
ConditionExcellent
PhotoSee Photo
Max. Thickness : 25 mm,
Max. Diameter : 6000 mm,
Comes with six knuckles.
 
  4
IDMA29618
MakeFaccin
ModelBF30/6
YOM1996
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 6000 mm x 30 mm,
Minimum dish size : 1400 mm,
Maximum dish size : 6000 mm,
Maximum thickness : 30 mm,
Knuckle radius min/max : 80 up to 600,
Total motor power : 100 HP,
Number of drive rolls : 2,
Tree phase voltage : 380 V / 50 Hz,
Knuckle rolls coming with the machine : 80, 100, 150, 200, 250, 300, 400, 500.
Weight : 35 tons.
 
  5
IDMA29099
MakeSchleifstein
Model
YOM1980
ConditionGood Condition
PhotoSee Photo  |  See Video
Dish head type : 2:1 Ellipsoidal.
Working Principle : Hollow Spinning.
Working Process : Cold Forming Below 12C.
Diameter Range : 1850 mm to 3500 mm.
Thickness Range : Up to 20 mm.
Material :- Carbon Steel, Stainless Steel, Nickel & Copper Alloys and any formable material by cold spinning.
 
  6
IDMA26151
MakeFaccin
ModelPPM36135
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 250 tons,
Slide stroke : 600 mm
normally used on 12 mm, steel but can be used up to 16/20 mm, diameter : 3000 mm
Comes with complete Dishing Die Set's & Manipulator Faccin Type MA36/16
Dies with following radius come with the machine:
50, 60, 75, 90, 100, 120, 140, 160, 250, 400, 500.
 
  7
IDMA23708
MakeKorea
ModelCIM-HP600
YOM
ConditionBrand New
PhotoSee Photo
Capacity : 600 ton,
Working pressure Max. 220 kg/cm2,
Kicker capacity Max. 10 tons,
Stroke of main ram: up/down 900 mm, right/left 1700 mm (each), radius 360 deg. endless,
Daylight length 2200 mm,
Bolster area 5500 x 1500 mm,
Down speed 100 mm/sec,
Pressing speed 4 mm/sec,
Up speed more than 150 mm/sec,
Motor 57/7.5 Kw,
Hyd. Pump(high) 55 cc/rev,
Oil tank 1000 L,
Net Weight 65 ton,
Dimensions approx. 2000 x 6700 x 5800 mm.
top