Category : Sheet Metal

Sub-Category : Press Fineblanking Hydraulic

Total Machines Found : 5

Select | Machine Details
 
  1
IDMA27623
MakeSchmid
ModelHSR250
YOM1979/Overhaul 2002
ConditionDismantled,Good condition
PhotoSee Photo
Capacity: 250 ton,
Stroke min: 30 mm,
Stroke: 200 mm,
V- Ring
Nominal force: 150 ton,
Counter Ram
Nominal force: 55 ton,
Tool Dimensions
Lower table-width; 695 mm,
Lower table -depth: 730 mm,
Upper table -width: 550 mm,
Upper table -depth: 550 mm,
Daylight max: 340 mm,
Distance between columns (H-frame): 695 mm,
Pass line opening (free passage in side columns): 290 mm,
Strip Feeder
Feeder type: Grip feeder,
Nominal foce: 4.9 kN,
Sheet width max: 270 mm,
Sheet thickness max: 20 mm,
Feeding step min: 0 mm,
Feeding step max: 220 mm,
Electrical specification
Total power consumption: 45 kW,
Mains voltage: 380 V,
Mains frequency: 50 Hz,
Dimensions/Weights
Total weight approx: 13000 kg,
Facilities:
+ feeders with linear scales and proportional hydraulics.
+ table with quick die clamping system,
+ RAZIOL conveyor lubrication system,
Known Problems:
a) a small hydraulic cylinder of the outlet feeder is in fault (minor problem)
b) also a hydraulic pipe of the scrap chopper is not working (minor problem)
c) repair of frame required
 
  2
IDMA20839
MakeFeintool
ModelGKPF100/160
YOM1971
ConditionGood Condition
PhotoSee Photo
Power in tons :160T,
Height 2.58 m,
Total tonnage: 160 ton,
Blanking tonnage: 100 ton,
Hydraulic opposing force-up: 0,3-22 ton,
Hydraulic opposing force-down: 3-25 ton,
Ejector force: 2-4 ton,
V-Ring force: 6-50 ton,
Stripper force: 6-12 ton,
Stroke length: 50 mm,
Stroke speed: 28-70/1 min,
TOOL AREA:
Upper table: 420x420 mm,
Lower table: 420x420 mm,
Clearance between columns:
- Front to back: 450 mm,
- Right to left: 200 mm,
Daylight dimension above the table: 140-220 mm,
FEED:
Max. material thickness: 5 mm,
Max. material width: 180 mm,
Max. feed length: 180 mm,
Total power consumption: 4 kW.
 
  3
IDMA18370
MakeGerman
ModelHVP160
YOM1992
Conditionnever used
PhotoSee Photo
160 tons , ram stroke 200 mm, shut height 460 mm, table size 800 x 760 mm, T slot 22 mm, opening in table dia 120 mm, table height 900 mm, ram size 800 x 760 mm, opening in ram dia 60 mm, main motor 30 kW, oil capacity 375 l, Idle stroke up and down 150 mm/sec, working stroke 18/36 mm/sec, dimensions 2500 x 1800 mm, weight 18,0 tons.
 
  4
IDMA7671
MakeSchmid
Model250
YOM1971
ConditionNew
PhotoSee Photo
250 ton,precision press type (fixed punch system) 250 MT, max.tool pressure 275 tons, max.ram travel 196.875 mm, min.ram travel 125 mm, max.upper cushion pressure 110 tons, max.upper cushion travel 29.6875 mm, max. ram ejector pressure 33 tons, max. ram ejector travel 29.6875 mm, max. stroke per minute 1029.25 mm, hydraulic pump max. volume 58 gallon/minute, max. pressure (atmosphere) 5000# / sq.in., electric motor 30 HP, max. acceptable tool height 293.75 mm, min. acceptable tool height 221.875 mm, tool dia upto 443.75 mm, min. distance between ram & base 418.75 mm, opening in frame, left to right (front) 618.75 mm, opening in frame, front to back (side) 243.75 mm, passage height 562.5 mm, die space 600 x 600 mm, slide feed & scrap chopper, approx. weight 9.5 tons, Hydraulic
 
  5
IDMA7670
MakeSchmid
Model160
YOM1975
ConditionNew
PhotoSee Photo
160 ton,max.tool pressure 175 tons, max.ram travel 196.875 mm, min.ram travel 125 mm, precision press type (fixed punch system) 160 MT, max.upper cushion pressure 66 tons, max.upper cushion travel 29.6875 mm, max. ram ejector pressure 22 tons, max. ram ejector travel 29.6875 mm, max. strokes per minute 1041.5 mm, hydraulic pump max. volume 43 gallon/minute, max. pressure (atmosphere) 5000#/sq.in., electric motor 25 HP, max. acceptable tool height 293.75 mm, min. acceptable tool height 221.875 mm, tool dia upto 359.375 mm, max.distance between ram & base 418.75 mm, opening in frame, left to right (front) 531.25 mm, opening in frame, front to back (side) 243.75 mm, passage height 500 mm, die space 450 x 450 mm, slide feed & scrap chopper, approx. weight 7 tons, Hydraulic
top