Category : Sheet Metal

Sub-Category : Press Fineblanking Mechanical

Total Machines Found : 15

Select | Machine Details
 
  1
IDMA33765
MakeFeintool
ModelGKPF100
YOM1992
ConditionGood Condition
PhotoSee Photo
Total force (nominal): 100 ton
Controls: PLC Hardmeter control
 
  2
IDMA33764
MakeFeintool
ModelGKPF160
YOMNew approx.1988 overhaul 2004
ConditionGood Condition
PhotoSee Photo
SLIDE
total force (nominal):160 to
ram adjustment:80 mm
stroke: 60 mm
stroke rate (min.): 20 /min
stroke rate (max.):70 /min
main drive power: 11 kW
V-RING
nominal force:40 to
stroke:14 mm
COUNTER RAM
nominal force:50 to
stroke: 10 mm
TOOL DIMENSIONS
lower table (left-right):480 mm
lower table (front-back): 520 mm
upper table (left-right):480 mm
upper table (front-back): 520 mm
shut height max.:314 mm
distance between columns (H-frame):500 mm
passline opening (free passage in side columns): 220 mm
STRIP-FEEDER
feeder type: roll feeder
sheet width max: 210 mm
sheet thickness max : 6 mm
feeding step max.:999.9 mm
sheet length min:2000 mm
nominal force:6 kN
band lubrication system: yes
band support rolls: yes
ELECTRICAL SPECIFICATIONS
total power consumption:35 kW
mains voltage :400 V
mains frequency:50 Hz
DIMENSIONS / WEIGHTS
space requirements -left/right-:2820 mm
space requirements -front/back-:2500 mm
total height:2800 mm
total weight approx.:9000 kg
ATTACHMENTS -FINEBLANKING PRESS-
closed cabin: yes
decoiler: optional
leveller unit :optional
waste cutter: yes
Machine completely renewed by FEINTOOL in 2004 (nameplate shows year 2004)
+ new PNEUTRONIC controller
+ servo feeders
+ DANFOSS frequency converter for speed variation
Controls:PLC PNEUTRONIC
fixed punch table
Machine is dismantled
 
  3
IDMA33757
MakeSchmid
ModelHSR320
YOMoverhauled in 2011
ConditionGood Condition
PhotoSee Photo
Technical data Fine Blanking Press
Nominal Power 2500 Kn - Strokes 12-80 - Mold area 255-3890 mm - Upper table 560x560 mm - Lower table 560 x 600
Decoiler Type 04/C
Coil width (min‐max): 60‐300 mm
Internal diameter coil (min‐max): 440‐520 mm
Esternal diameter coil : 1400 mm
Thickness coil: 0.8‐4 mm
Weight coil: 1800 Kg
Straightener Type R44/9/4
Motor Power : 5.5 Kw
Drive motor : NDI12MKED
Motovariator: 132 TR 4/3
Coil exit speed: 2‐12 mt/1
Traction rollers: 4 (straightener group)
Traction rollers: 4 (flexing group)
Straightening rollers: 9
Motor power central command: 1.1 Kw
 
  4
IDMA33742
MakeSMG Feintool
ModelHFA6300
YOM1989
ConditionGood Condition
PhotoSee Photo
MAIN RAM
Total force (nominal): 400-630 tons
Slide stroke: 20-100 mm

V-RING
Nominal force: 320 tons
Slide stroke: 40 mm

OTHER SPECIFICATIONS
Max. daylight: 400 mm
Cutting force: 180-585 tons
Max. second movement: 27 mm
Close speed: 120 mm/s

TOOL AREA
Lower table width: 900 mm
Lower table depth: 900 mm
Upper table width: 900 mm
Upper table depth: 1260 mm
Tool shut height: 320-400 mm
Clamping area distance: 500 mm
Material distance from upper table: 180-280 mm
Reading accurancy of adjustment indication: 0,01 mm

SPEED
Shearing speed: 3-24 mm/s
Slide closing speed: 120 mm/s
Slide return speed: 135 mm/s

POWER
Total power requirement: 97 kW
Main drive: 75 kW
 
  5
IDMA33721
MakeSMG Feintool
Model
YOM1988
ConditionGood Condition
PhotoSee Photo
1) FEINTOOL FINE BLANKING PRESS 630 ton with FEEDER LINE
Capacity: 630 ton
Power back pressure: 130 ton
Power roping: 320 ton
Strokes: 40
Slide stroke from: 20 to 100 mm
Die height from: 330 to 400 mm
Dimension table top: 760 x 790 mm
Dimension table down :760 x 790 mm
Stroke platform coping: 40 mm

2)FBP1400 Fine Blanking Press FEINTOOL 1400 ton with feeder line
Year of construction:1973
Power: 1400 ton
Power back pressure:300 ton
Power roping: 500 ton
Strokes: 18
Slide stroke:from 20 to 100 mm
Die height:from 360 to 610 mm
Dimension table top:1200 x 1200 mm
Dimension table down:1200 x 1200 mm
Creasing stroke:30 mm
Back pressure stroke:30 mm
3)FEINTOOL FINE BLANKING PRESS 200 ton with FEEDER LINE
Mod: GKP-F 125/200, with double toggle action
Year of construction: 1973
Total power:200 tons
Cutting power: 125 ton
Number of strokes:15-60
Hydraulic back pressure:60 ton
Blank holder pressure: 60 ton
Dimensions / Combined table Fix and Mobile
Mounting space for molds mm
Frontal distance between the columns:560 560
Lateral distance between the columns:270 270
Maximum height for the mold:160-305 175-320
Vertical adjustment of the upper fixing plate:145 145
Dimensions of the upper fixing plate:540540 540540
Dimensions of the lower fixing plate:540540 540540
Hydraulic table for fine blanking:15 15
Hydraulic extractor, maximum stroke 14 14
T-slots in the fixing plates M18 M18
Feeding Unit
Maximum allowable thickness of the materia:10 mm
Maximum allowable width of the material:250 mm
Maximum feed per stroke of the slide:250 mm
General dimensions
Size of the machine:
Height: 3120 mm
Depth:1900 mm
Approximate weight:14.5 tons

4) FBP160 Fine Blanking Press FEINTOOL 160 ton with Feeder Line
Year of construction:1970
Power:160 ton
Cutter Power:100 ton
Stroke par minute:18-72
Fixed stroke: 61 mm
Dimension table ram:470 x 470 mm
Dimension table:470 x 470 mm
Technical details coiler:
Min. thickness material:1,0 mm
Max thickness material: 4,50 mm
Max Width :160 mm
 
  6
IDMA32496
MakeSMG Feintool
ModelHFA6300
YOM1989
ConditionGood Condition
PhotoSee Photo
MAIN RAM
Total force (nominal): 400-630 tons
Slide stroke: 20-100 mm

V-RING
Nominal force: 320 tons
Slide stroke: 40 mm

OTHER SPECIFICATIONS
Max. daylight: 400 mm
Cutting force: 180-585 tons
Max. second movement: 27 mm
Close speed: 120 mm/s

TOOL AREA
Lower table width: 900 mm
Lower table depth: 900 mm
Upper table width: 900 mm
Upper table depth: 1260 mm
Tool shut height: 320-400 mm
Clamping area distance: 500 mm
Material distance from upper table: 180-280 mm
Reading accurancy of adjustment indication: 0,01 mm

SPEED
Shearing speed: 3-24 mm/s
Slide closing speed: 120 mm/s
Slide return speed: 135 mm/s

POWER
Total power requirement: 97 kW
Main drive: 75 kW
 
  7
IDMA31629
MakeSMG Feintool
ModelHFA6300
YOM1986
ConditionGood Condition
PhotoSee Photo
Total force (nominal): 400-630 ton,
Slide stroke: 20-100 mm,
Nominal force: 320 ton,
Slide stroke: 40 mm,
Max. daylight: 400 mm,
Cutting force: 180-585 ton,
Max. second movement: 27 mm,
close speed: 120 mm/s
 
  8
IDMA28561
MakeFeintool
ModelGKPF50/80
YOM1976
ConditionGood Condition
PhotoSee Photo
Shearing force : 50 ton,
Total force : 80 ton,
Force for pushing out/presure of pump : 2-4 ton,
Front passage between the columns : 450 mm,
Upper plate : 420 x 420 mm,
Bottom plate : 470 x 430 mm,
Moving of upper plate : 80 mm,
Max hydraulic stroke :-
In bottom : 11 mm,
Of pushing out : 8 mm,
Max steel thickness : 5 mm,
Max width of band : 180 mm,
Electricity : 380V / 50Hz,
Main motor : 12 kW,
Dimensions : 1600 x 1400 x 2580 mm,
Weight : 8000 kg.
 
  9
IDMA22644
MakeFeintool
ModelHZPUJ650/400-1250/1250
YOM
ConditionGood working condition
PhotoSee Photo
650 tons, ram stroke 875 mm, shut height 1575 mm, distance between columns 1260 mm, table size 1250 x 1250 mm, ram size 1250 x 1250 mm, drawing ram area 550 x 550 mm, closing speed 400 mm/s, max pulling speed 36mm/s, return speed 280 mm/s, reverse power thrust 52 tons.
 
  10
IDMA20990
MakeGERMAG
ModelHSA 50M
YOM1979
ConditionGood Condition
PhotoSee Photo
50ton, Table:500x400mm, Ram stroke:25mm, Ram ajdustmenet:70mm, number of strokes min:140/min, number od strokes max:800/min, sheet width max:180mm,
 
  11
IDMA20603
MakeRaskin
Model8025E2
YOM1995
ConditionExcellent
PhotoSee Photo
800 tons,
PRESS TABLE :
clamping surface (left-right) 2500 mm ,
clamping surface (front-back) 1600 mm ,
RAM
ram force 800 tons,
clamping surface (left-right) 2500 mm ,
clamping surface (front-back) 1600 mm ,
stroke 315 mm
number of strokes max 20 /min ,
RAM (MECHAN. PRESS) :
ram adjustment 160 mm ,

stroke max. 315 mm
variable speed ,
number of strokes max 20 /min
hydraulic overload protection ,
TOOL ASSEMBLY DIMENSIONS :
shut height (stroke down, adjustment up) 645 mm ,
distance between columns (H-frame) 2550 mm ,
free passage between side columns (width) 755 mm ,
DIMENSIONS / WEIGHTS
space requirements length 4200 mm ,
space requirements width 2600 mm ,
total height 6550 mm ,
ATTACHMENTS FOR PRESSES
acc. to actual accident protection regulation ,
autom. tool clamping device ,
hydraulic overload protection ,
autom. ram adjustment ,
feeder: type roll feeder ,

leveller unit
frame design H-frame
openings in uprights ,
number of ram actions 1

 
  12
IDMA19115
MakeFeintool
ModelGKPF100/160
YOM1973
ConditionGood Condition
PhotoSee Photo
Capaccity:
Total tonnage : 160 ton,
Blanking tonnage : 100 ton,
 
  13
IDMA17668
MakeFeintool
Model
YOM
ConditionVery good condition
PhotoSee Photo
630 tons
 
  14
IDMA17667
MakeMori
Model
YOM
ConditionVery good condition
PhotoSee Photo
200 tons
 
  15
IDMA16784
MakeSchmid
ModelHSR160
YOM1987
ConditionVery good condition
PhotoSee Photo
Capcity 160 t,
stroke 30 - 200 mm,
no. of strokes 90 Hub/min,
distance between columns 600 mm,
distance table/ram, max. stroke up, adjustment up 420 mm,
table surface area 595 x 714 mm,
knife-edged ring capacity 90 t,
counter pressure 35 t,
side window 290 mm,
ram surface 530 x 450 mm,
cutting speed 7 - 45 mm/s,
ajustment speed 135 mm/s,
return speed 175 mm/s,
cutting capacity scrap cutter 20 t,
material width of feeder 270 mm,
material thickness of feeder 20 mm,
feed length 220 mm,
clamping force of moving pincer 17400 N,
clamping force of fastening pincer 8700 N,
feeding force 4900 N,
strip length min. 1850 mm,
oil volume 1400 l,
power requirement 55,0 kW,
weight of the machine ca. 11.000 kg,
dimensions of the machine ca. 3,0 x 1,4 x 2,3 m.
with light barrier, knife-edged ring and blank holder pressure pre-tightened, centralized lubrication, controls (Siemens SPS)
pincer's feed right and left with waste cutter, feeder with SIG controls, height adjustment and mech. band guidance.
top