Category : Sheet Metal

Sub-Category : Press High Speed Blanking

Total Machines Found : 63

Select | Machine Details
 
  1
IDMA34674
MakeBruderer
Model
YOM1987
ConditionGood Condition
PhotoSee Photo
1) Maker Bruderer
Serial Number RU2098
Model BSTA 30II
Year Of Manufactured 1987
Capacity (Tonnage) 30ton
Stroke 38-13mm
S.P.M (R.P.M) 875-1500
Bolster Area 530mm x 530mm
2)Maker Bruderer
Serial Number 2078
Model BSTA 30II
Year Of Manufactured 1986
Capacity (Tonnage) 30ton
Stroke 38-13mm
S.P.M (R.P.M) 875-1500spm
Bolster Area 530mm x 530mm
3) Maker Bruderer
Serial Number RU2110
Model BSTA 30II
Year Of Manufactured 1988
Capacity (Tonnage) 30ton
Stroke 38-13mm
S.P.M (R.P.M) 100-1500spm
Bolster Area 530mm x 530mm
4) Maker Bruderer
Model BSTA25
Capacity (Tonnage) 25ton
Bolster Area 530mm x 530mm
5)Maker ISIS
Serial Number N60025
Model 85060
Year Of Manufactured 1997.07
Capacity (Tonnage) 60ton
Stroke 50mm
Die Height 300mm
S.P.M (R.P.M) 150-400spm
Bolster Area 840mm x 600mm 140mm
Slide Adjustment 30mm
Main Motor 11kw
Bed opening 650mm x 130mm
6) Maker ISIS
Serial Number 30ES 051
Model 84030
Year Of Manufactured 1999.08
Capacity (Tonnage) 30ton
Stroke 30mm
Die Height 205mm
S.P.M (R.P.M) 150-400spm
Bolster Area 500mm x 400mm 135mm
Slide Adjustment 30mm
Main Motor 3.7kw
Bed opening 360mm x 80mm
7) Maker Yamada Dobby
Serial Number VO-30CS-014
Model VO-30CS
Year Of Manufactured 1985.05
Maker Yamada Dobby
Serial Number VO-30CS-014
Model VO-30CS
Year Of Manufactured 1985.05
 
  2
IDMI7443
MakeYamada Dobby
ModelDP30SW
YOM1995
ConditionGood Condition
PhotoSee Photo
Capacity: 30 ton,
Stroke of slide:30 mm,
Stroke per minute; 15~750 SPM,
Die height: 225 mm,
Adjustment of slide: 30 mm,
Shank hole: 51 mm,
Slide area: 550 x 320 mm,
Bolster: 550 x 450 x 110 mm,
Bed opening: 450 x 150 mm,
Motor required: 45 x 5.5 KW
 
  3
IDMA33941
MakeAIDA,Japan
ModelPDA-20L
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 tons
Stroke: 30 mm
Strokes per minute: 100-300 mm
Slide adjustment: 60 mm
Slide area: 1370 x 650 mm
Bolster area: 1500 x 850 mm
Distance between slide and bolster: 380 mm
Cushion opening area: 1300 x 380 mm
Cushion area: 1500x850x190 mm
Main motor: 22 kW x 4
Pump motor: 0,2kW x 4
Capacity of equip.for shering scrap: 4 tons
 
  4
IDMI7430
MakeAIDA,Japan
ModelTP250R0
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 25 ton,
Bolster area: 550 x 300 mm,
Slide area: 250 x 200 mm,
Die height: 195 mm,
Stroke: 25 ton,
Stroke per min: 170-30
Slide adjustment: 50
 
  5
IDMA33925
MakeAIDA,Japan
ModelHMX80(1)
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 80 ton,
Slide stroke: 30 mm,
Strokes per minute: no load: 200~800 spm,
Die height: 400 mm,
Slide adjustment: 40 mm,
Slide area LR x FB: 1100 x 450 mm,
Bolster area LR x FB: 1100 x 700 mm,
Main motor: 30 kw,
Require air pressure: 5 kgf/cm2
Complete with all requirement to operate
 
  6
IDMA33919
MakeZTS Kosice Sloakia
ModelA2-200
YOM1982
ConditionGood Condition
PhotoSee Photo
Nominal pressing force - 200 t
Distance between columns - 1450 mm
Size of the clamping surface of the table - 1350 x 1100 mm
Slider size - 1250 x 900 mm
Stroke of slider - 30 mm
Distance between slider and table- 400 mm
Adjustment of slider - 100 mm
Thickness of table - 180 mm
Table slot 1160 x 360 mm
Number of traverse in slider 4
Stroke of Cushion - 4 mm
All pressing force of Cushion/ejector - 20 t
Slider strokes per minute (smoothly adjustable) - 100...350
Strip with 250 mm
Outside strip roll dia 1250 mm
Weight of roll 200 t
Strip thickness 1,0 mm
Main motor power - 30 kW
Total weight about - 37 t
 
  7
IDMA33853
MakeMinster
ModelP2H-160
YOM
ConditionGood Condition
PhotoSee Photo
Tonnage Capacity:163.28 Metric Tons
Stroke:99.06mm
Slide Adjustment: 99.06mm
Shut Height: 449.58mm
Bed Area:1600.20mm L-R x 850.90mm F-B
Bed Opening: 1300.48mm L-R x 370.84mm F-B
Slide Area:1600.20mm L-R x 850.90mm F-B
Bolster Area: 1600.20mm L-R x 850.90mm F-B
Bolster Thickness: 124.46mm
Window Opening: 1300.48mm L-R x 248.92mm F-B
Stroke Speed:70 - 250 SPM
Drive Motor: 29.83 kw
EQUIPPED WITH:
Minster Production Management Press Control V6 w/ Color Touch Screen
Auxillary Flywheel
Quick Lift Slide
 
  8
IDMA33810
MakeAIDA,Japan
ModelHMX300
YOMNew 2012
ConditionGood Condition
PhotoSee Photo
3,000KN Capacity (337 Ton)
STROKE: 1.25"
160-500 Strokes/Min.
SHUT HEIGHT: 20.47"
ADJ: 2.36"
BED SIZE: 78.74" x 39.37"
SPM: 160-500
AIR CLUTCH & BRAKE
AIR COUNTERBALANCES
7.5" T-SLOTTED BOLSTER
19" WINDOWS
WINTRISS SMAARTPAC 2 PRESS
AUTOMATION CONTROL
2011 VAMCO PRESS MOUNTED SERVO FEED
S/N QEC31260-1017
12" WIDE PA INDUSTRIES SS1211 SLOOP 5/6 STOCK STRAIGHTENER DOUBLE END UNCOILER
 
  9
IDMA33708
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) Bruderer 30ton High Speed Press(BSTA 30II/AD-191101_004)
Capacity: 30 ton
Stroke:38-13 mm
S.P.M (R.P.M):875-1500 spm
2) Bruderer 30ton High Speed Press(BSTA 30II/AD-191101_003)
Capacity:30 ton
Stroke:38-13 mm
S.P.M (R.P.M):875-1500 spm
3) Bruderer 30ton High Speed Press(BSTA 30II/AD-191101_002)
Capacity: 30 ton
Stroke: 38-13 mm
S.P.M (R.P.M):100-1500 spm
4)Bruderer 25ton High Speed Press(BSTA 25/AD-191101_001)
Capacity 25 ton
 
  10
IDMA33703
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) ISIS 60ton High Speed Press(85060/AD-200318_001)
YOM:1997
Capacity: 60 ton
Stroke: 50 mm
Die Height: 300 mm
S.P.M (R.P.M): 150-400 spm
Bolster Area: 840 mm X 600 mm- X 140 mm
Slide Adjustment: 30 mm
Main Motor: 11 kw
Bed opening: 650 x 130 mm
2)ISIS 30ton High Speed Press(84030/AD-190321_001)
YOM:1999
Capacity: 30 ton
Stroke: 30 mm
Die Height: 205 mm
S.P.M (R.P.M): 150-400 spm
Bolster Area: 500 mm X 400 mm- X 135 mm
Slide Adjustment:30 mm
Main Motor:3.7 kw
Bde opening:360 x 80 mm
3)Yamada Dobby 30ton High Speed Press(VO-30CS/AD-170404_001)
YOM:1985
Capacity:30 ton
Stroke:25 mm
Die Height:220 mm
S.P.M (R.P.M):150-1100 spm
Bolster Area:600 mm X 390 mm- X 142 mm
Slide Area:400 mm X 250 mm
Slide Adjustment:50 mm
Main Motor:11 kw
Bed opening:350 mm x 120 mm
 
  11
IDMA33670
MakeYamada Dobby
ModelFP15SS
YOM1993 December
ConditionGood Condition
PhotoSee Photo
Capacity: 15 tons
Stroke:15 mm
SPM: 250 - 1200
Die Height:23.2 mm
Adjust:30 mm
Bolster:400 x 400 mm
 
  12
IDMA31805
MakeYamada Dobby
ModelVO-30CS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:30 ton
Stroke :25 mm
Die Height: 220 mm
S.P.M (R.P.M):150-1100 spm
Bolster Area: 600 mm X 390 mm- X 142 mm
Slide Area:400 mm X 250 mm
Slide Adjustment:50 mm
Main Motor:11 kw
Bed opening:350 mm x 120 mm
 
  13
IDMA31642
MakeRaster
Model
YOMOverhaul 2014
ConditionGood Condition
PhotoSee Photo
Force : 60 ton,
Stroke per min: 60-300
Parameters:
Force: 60 ton,
Distance min max table slide: 300-350 mm,
Table dimensions (830 x 830 ) mm,
Table whole: (550 x 120 ) mm,
Slide: (710 x 360) mm,
Stroke: (10-80) mm,
Slide adjustment : 50 mm,
Speed (60-300 ) strokes/min,
Machine weight: 8000 kg.
 
  14
IDMA30677
Make
Model
YOM
Condition
PhotoSee Photo
2 UNITS PRESS PERKINS USA
VARIABLE SPEED 80 >>275 S.P.MINUTE
STROKE FIS 32 mm AIR FRICTION CLUTCH CENTRAL OILING SYSTEM
DOUBLE RAM SPECIAL TABLE WITH ALOOW SLADG OUT EASILY
 
  15
IDMI6898
MakeISIS
Model
YOM1987
ConditionWorking
PhotoSee Photo
Quantity- 2 no.s, Model- 81025CHS, Capacity 25 ton, Stroke Per Minute 150-600 including Decoiler, Straightner, feeder
 
  16
IDMI6897
MakeYamada Dobby
Model
YOM1984
ConditionWorking
PhotoSee Photo
Model- DP-VD-20CS, Capacity 20 ton, Stroke Per Minute 150-1200 including Decoiler, Straightner, feeder, Stroke of slide- 20 mm, Die height- 230 mm, Adjusment of slide- 30 mm, Slide area- 280x200 mm, Bolster- 500x300x65 mm,
Bed opening- 250x120 mm
 
  17
IDMA30563
Make
Model
YOM1987
ConditionWorking
PhotoSee Photo
BPA 90, TONNES- 90, Strokes per minute- 100-500, 2 presses available
 
  18
IDMA30562
MakeRaster
Model
YOM1990
Condition
PhotoSee Photo
BPA 75, Tonnes- 75, Strokes per minute- 120-600, 3 presses available
 
  19
IDMA30561
MakeRaster
Model
YOM1984
ConditionWorking
PhotoSee Photo
Capacity- 30 tons, No of strokes per minute- 200-1200, 4 presses available
 
  20
IDMA30534
MakeBliss
Model
YOM
ConditionGood Condition
PhotoSee Photo
400 Ton Bliss 108" x 72" 24" stroke, 40" shut height, 13 spm, 70 ton
cushion
 
  21
IDMA30532
MakeAIDA,Japan
Model
YOM1990
Condition
PhotoSee Photo
125 Ton Aida High Speed 2 Point Press
Model: HMX-125
Specifications:
Tonnage: 125 Ton
Stroke: 1.18"
Die Height: 14.96"
Adjustment: 1.77"
Bed Area: 51.18" Lr X 33.46" Fb
Slide Area: 51.18" Lr X 23.62" Fb
SPM: 200-800

Equipped With;
5.91” x .030” x 7,500 Lbs Servo Feed Line
Vamco Quantum 250 Feeder (New 2014)
Unist Material Lube System (New 2015)
6.30" Bolster
45.08" Floor To Top Of Bolster
Die Change System
 
  22
IDMA29596
MakeOhtsuka Sumitomo
ModelHE300
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke Length : 30 mm,
Stroke/min : 100-300 spm,
Die height : 330-380 mm,
Ram area : 1,300 x 700 mm.
Bolster area : 1,300 x 900 mm.
No die cushion.
 
  23
IDMA29423
MakeKomatsu
ModelE2M300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Stroke: 250 mm,
SPM: 25-80,
Bolster: 1600 x 900 mm,
Slide: 1600 x 900 mm,
Die height: 550 mm,
Adjust: 100 mm,
Make: Sonoruka,
Model: FL-3050V,
Coil weight: 3000 kgs,
Coil ext dia: 700-1200 mm,
Coil Int Dia: 508 mm,
Material Thickness: 1.2 - 3.0 mm,
Material Width: 100 - 500 mm,
Feed Speed: 18 m/min
 
  24
IDMA29298
MakeCincinnati HME
ModelRigispeed R2-100
YOM
ConditionGood Condition
PhotoSee Photo
Stroke per minute : 80-250 spm.
With New invertor speed control.
With Swedish Feeder + Scrap Cutter + Decoiler.
 
  25
IDMA29196
MakeBruderer
ModelBSTA60
YOM
ConditionGood Condition
PhotoSee Photo
High performance stamping press with perfected mass balancing system and adjustable stroke,
Press force 600 kN,
Hub adjustable in 10 steps ca. 6 mm (20-76 mm),
Speeds ranging from 70 to 700 spm.
Bolster plate dimensions: 620 x 620 mm,
Compact design and low overall height,
The BSTA 60 is suitable for special solutions like transfer applications,
Control based on IPC, high-quality TFT display with long service life and even illumination for good readability even under difficult lighting,
Integrated safety control,
Signal transmission to the stamping press via Ether CAT bus system.
 
  26
IDMA29169
MakeRaster
ModelHR80-1100SL4
YOM1982
ConditionGood Condition
PhotoSee Photo
Pressure : 80 t,
Stroke : 20 - 80 mm,
Number of strokes : 100 - 500 min-1,
Distance between the columns : 1130 mm,
Daylight : 320 – 480 mm,
Table surface area : 1000 x 550 mm,
Ram surface area : 1100 x 630 mm,
Hole in table : 700 x 120 mm,
Table height over floor : 1100 mm,
Required power : 20 kW,
Required space : 3600 x 2500 x 3500 mm,
Weight ca. : 17,5 t.
Kaiser grip feeder : ZR 18,
Working direction left to right,
Material width : 10 - 180 mm,
Feeding length : 0 - 150 mm,
ARKU Feeding line : 3020 / 4,
Double mandrel : 2 x 1 t,
Material width : 180 mm,
Exterior diameter : 1300 mm,
Interior diameter : 360 – 530 mm,
Speed : 0 – 20 m / min,
Leveller :
Material width : 200 mm,
Number of rolls : 21,
Diameter of rolls : 30 mm,
Material thickness : 0,5 – 8 mm,
Cross section : 1200 mm,
Speed : 40 m / min,
Required power : 16 kW.
 
  27
IDMA29168
MakeKaiser
ModelV100W1080
YOM1989
ConditionGood Condition
PhotoSee Photo
Pressure : 100 t,
Stroke adjustable : 30 - 100 mm,
Ram adjustment : 80 mm,
Shut height (stroke down, adjustment up) : 400 mm,
Number of strokes : 50 - 300 spm,
Table surface area : 1030 x 800 mm,
Ram surface area : 900 x 620 mm,
Table height over floor ca. : 1100 mm,
Height over floor ca. : 3500 mm,
Main motor : 18,5 kW,
Required power total ca. : 28 kW,
Machine weight ca. : 14 t.
Original electronic Kaiser – roll feeder,
KWV 250 YOM 2002,
With hydraulic roll pressure system,
Material width max : 250 mm.
with shock vibration system, with
PLC Siemens Simatic S5, with flying wheel, with accustic
cabine, with automatic stroke adjustment, with motorized ram
adjustment, with hydraulic die clamping device, with tool
monitoring, WITH NEW parts and overhauld in the eccentric
wave and connecting rods.
 
  28
IDMA29084
MakeManzoni
ModelT200-2MR/SL(CE)
YOM1999
ConditionGood Condition
PhotoSee Photo
Capacity : 200 t,
Stroke : 80 mm,
No. of strokes : 50 - 150 /min,
Distance between columns : 1700 mm,
Distance table/ram, max. stroke up, adjustment up : 705 mm,
Table surface area : 1600 x 1000 mm,
Hole in the table : 950 x 350 mm,
Distance between oil collecting pans : 1500 mm,
Side window : 800 mm,
Ram surface : 1500 x 1000 mm,
Ram adjustment : 125 mm,
Height above floor m,
Power requirement : 45,0 kW,
Dimensions (W x D x H) : 3,2 x 2,5 x 4,55 m,
Dimensions of switch cabinet (W x D x H) : 3,1 x 0,6 x 2,6 m,
Weight : 28,0 t.
 
  29
IDMA28651
MakeAIDA,Japan
ModelPDA12
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity : 125 ton
Stroke : 30 mm
 
  30
IDMA28612
MakeAIDA,Japan
ModelPDA40
YOM1985
ConditionGood Condition
PhotoSee Photo
Max. ram force : 400 tons,
Slide stroke : 75 mm,
Number of stroke per minute : 40-150,
Die height (stroke down, adjust up) : 650 mm,
Slide adjustment : 80 mm,
Bolster area : 2150 x 1000 mm,
Slide area : 2150 x 1000 mm,
Main motor : 45 kW,
Power source : 380 V / 50 Hz,
Air pressure : 7 kg/cm2.

Specification of roll feed :-
Model : RCF-R45,
Coil thickness : 0,5-1,0 mm,
Coil width : 300-450 mm,
Feed length : 353 mm,
Feed height : 330-370 mm,

Specification of scrap cutter :-
Capacity : 4 tons,
Stroke length : 30 mm,
Cut position : +/-10 mm.
Qty : 5 nos.
 
  31
IDMA28594
MakeEBU
Model
YOM1992
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Stroke: 30-240 mm,
Bed area: 1600 x 1300 mm,
Slide area: 1600 x 1300 mm,
Slide adjustment: 150 mm,
Shut height SDAU: 740 mm,
Speed: 20-60 spm,
Power of main motor: 45 kW,
Approx weight of press: 59,000 kgs,
Overall dimensions: 4520 x 4010 x 2525 mm,
Feature:
Complete with Siemens control - Hydraulic over load,
protection ARKU feedling line new in 1992,ARKU servo power
master rollfeed 800,straightener RM 50/75 with 21 rolls,
Capacity 750 mm x 4 mm, decoiler 8 ton coil weight.
 
  32
IDMA28335
MakeRaster
ModelHR250-2200NL-R
YOM1991
ConditionGood condition,under power
PhotoSee Photo
Capacity : 250 t,
Ram stroke : 100 - 300 mm,
Ram adjustment : 125 mm,
Shut height (stroke down, adjustment up) : 695 mm,
Table surface area : 2200 x 1200 mm,
Ram surface area : 2200 x 1200 mm,
Number of strokes : 20 – 100 spm,
Weight ca. 48 t.
ARKU Feeding line AH5000/2/500/MS6-50.
Double mandrela decoiler each side : 5 t,
Material width max. : 50 – 500 mm,
Material thickness : 0,8 – 4,0 mm,
Cross section : 2900 mm2,
Feeding length : 1 – 9999,9 mm.
 
  33
IDMA28330
MakeKaiser
ModelV160WR
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity : 160 ton,
Stroke adjustable : 50 - 150 mm,
Ram adjustment : 100 mm,
Shut height (stroke down, adjustment up) : 600 mm,
Number of strokes : 30 - 180 min-1,
Table surface : 1250 x 900 mm,
Hole in table : 1000 x 250 mm,
Ram surface : 1250 x 900 mm,
Side opening : 520 mm,
Height over floor ca. : 4200 mm,
Required power : 18,5 kW,
Weight ca. : 26 t.
With SIEMENS S7 control,
With LORENZ feeding line.
 
  34
IDMA28307
MakeZTS Kosice Sloakia
ModelA2-200/360
YOM1986/1990
ConditionGood Condition
PhotoSee Photo
Capacity:200 ton,
Distance between columns: 1450 mm,
Table size:1350 x 1100 mm,
Slider size: 1250 x 900 mm,
Slider travel: 30 mm,
Distance between slider and table: 400 mm,
Table thickness: 180 mm,
Table slot: 1160 x 360 mm,
Number of traverse in slider 4
Cushion travel: 4 mm,
Cushion capacity:20 ton,
Max. work piece thickness: 0.5 mm,
Strokes per minute 100...350
Main drive power: 30 kW,
Weight of the press: 41000 kg (without accessories)
Feeder and straightener technical specifications:
Max. strip width: 360 mm,
Max. inner diameter coil strip: 1200 mm,
Inner range of strip diameter: 500...610 mm,
Max. strip thickness: 0.5 mm,
Travel of upper rolls: 6 mm,
Max. coil weight: 3000 kg,
Unroll speed of coil: 0.1...60 m/min,
Motor: 3 kW,
Weight: 2200 kg,
Quantity: 2 Presses.
Accessories:
Uncoiler A2 HR 360-2,
Feeding device W8-250,
Shearing device AS 3 250,
Stacking device SV 4,
 
  35
IDMA28242
MakeBruderer
ModelBSTA400-95B
YOM1990 Overhauled 2007
ConditionGood Condition
PhotoSee Photo
Capacity : 40 ton,
Stroke (stepless) :- From : 100 s/min & To : 1650 s/min,
Performance : 4 supports,
Table surface :- Length : 940 mm & Width: 590 mm,
Table relieving :- Length : 910 mm & Width : 200 mm,
Tool height : 200 mm,
With pressing power : upside down,
Slide adjustment : 51 mm,
Stroke adjustment :- From : 19 mm & To : 28,6 mm,
Slide clamping surface :- Length : 810 mm & Width : 360 mm,
Passage between the supports : 225 mm (lateral),
Voltage : 50 Hz, 3x220 V,
Power : 25 kW,
Total installed power : 40 kW,
Overall dimensions :- Length : 2200 mm, Width : 1200 mm & Height : 3065 mm,
Weight : 7300 kg.
Press is fitted with :-
Roll feeds BRUDERER BBV 190/85H.
Strip keeper.
 
  36
IDMA28216
MakeRaster
ModelHR400-2200 NL-R
YOM1990
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Ram stroke: 40-200 mm,
Ram adjustment: 125 mm,
Shut height (stroke down,adjustment up): 700 mm,
Table surface: 2200 x 1200 mm,
Ram surface: 2200 x 1000 mm,
Hole in table: 1600 x 350 mm,
Number of strokes: 20-100 spm,
Height over floor ca: 5800 mm,
Weight ca: 87 ton,
ARKU feeding line: AR 5000/750/2 (Yom 1990)
Double mandrel coil weight each side: 5 ton,
Material width max: 50-750 mm,
Material thickness: 0,5-6,5 mm,
Cross section: 2900 mm2,
Feeding length: 1-9999,9 mm.
 
  37
IDMA28215
MakeZani
ModelDM123
YOM2007
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Side opening ca: 750 mm,
Shut height (stroke down,adjustment up): 650 mm,
Table surface: 2000 x 1200 mm,
Ram surface: 2000 x 1200 mm,
Distance between columns L-R: 2020 mm,
Slide adjustment: 120 mm,
Stroke adjustable: 30-200mm,
Number of stroke: 20-80 min-1,
Dimensions:
Height ca: 6200 mm,
Width ca: 3300 mm,
Depth ca: 2200 mm,
Weight ca: 45 ton.
 
  38
IDMA28053
MakeZTS Kosice Sloakia
ModelA2-200
YOM1977/1979/1981/1990
ConditionGood working condition
PhotoSee Photo
Capacity: 200 ton,
Ram stroke: 30 mm,
Strokes: 100-300 mm,
distance between columns: 1450 mm,
Clamping board: 1350 x 1100 mm,
Working surface of slider: 1250 x 900 mm,
Normal slider's travel: 30 mm,
Distance between desk and slider: 400 mm,
Slider's regulation: 100 mm,
Thickness of the clamping desk: 180 mm,
Hole in the desk: 1160 x 360 mm,
Hole in the table: 1200 x 300 mm,
Slider's traverses: 4,
Spring compression: 3 mm,
Total power of puller: 20 tones,
X slots in slider: 50 x 8 mm,
Number of strokes: 100..350,
Main drive power: 30 kW
Weight: 41 ton,
Quantity: 5 nos
 
  39
IDMA27749
MakeITO
Model
YOM1997
ConditionGood Condition
PhotoSee Photo
Capacity : 100 ton,
Stroke : 50 mm,
Stroke per minute : 80-300,
Dia height : 270 mm,
Adjustment : 50 mm,
Bolster : 1500 x 800 mm,
Feeder Gripper W 100 mm, T 3.2 mm Pitch 100 mm,
 
  40
IDMA27744
MakeAIDA,Japan
ModelPDA12L
YOM1981
ConditionGood Condition
PhotoSee Photo
Nominal force : 125 t,
Position of nominal force : 3.2 mm to bottom dead point,
Stroke : 30 mm,
Number of strokes per minute : 160 – 400,
Closed height : 360 mm,
Adjustment of the slide : 50 mm,
Ram dimensions : 1070 x 600 mm,
Bolster dimensions : 1200 x 800 mm,
Thickness of bolster plate : 160 mm,
Main motor power of : 18.5 kW,
Power of electric lubrication pump : 0.75 kW,
Low-speed power drive : 2,2 kW.
With feeding and uncoiling devices.
 
  41
IDMA27471
MakeAIDA,Japan
ModelPDA20L
YOM1975
ConditionGood Condition
PhotoSee Photo
Capacity : 200 tons,
Ram Stroke : 30 mm,
Adjustment of ram : 60 mm,
No of strokes / min : 120 to 300,
Table size : 1500 x 850 mm,
Ram size : 1350 x 650 mm,
Motor power : 22 kW,
Die Height : 380 mm.
 
  42
IDMA27466
MakeAIDA,Japan
ModelPDA30H
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity : 300 Tons
Stroke length: 200 mm,
SPM: 32-80,
Slide: 1850 x 900 mm,
Bolster: 1850 x 1100 mm
 
  43
IDMA27465
MakeAIDA,Japan
ModelPMX-L2-300H
YOM1986
ConditionGood Condition
PhotoSee Photo
Capacity : 300 tons
Stroke length: 200 mm,
SPM: 40-100,
Slide: 1850 x 880 mm,
Bolster: 1850 x 1000 mm,
Machine will be cleaned, refurbished & repainted.
Delivery Term : 3 month (approx).
 
  44
IDMA27426
MakeKomatsu
ModelE2M300
YOM1992
ConditionGood Condition
PhotoSee Photo
Capacity : 300 Tons,
Bed Area : 1475 X 1192 mm,
Slide Area : 1475 x 1083 mm,
Stroke : 195 mm,
Adjustment : 148 mm,
Shut Height : 728 mm over bolster,
Bolster : 276 mm thick,
Strokes per Minute : 30-90,
Windows : 600 mm wide approx,.
Floor to top of bolster : 1525 mm,
Overall Height : 3600 mm floor to top of motor approx.
Floor Standing.
Equipped With :-
Air Clutch and Brake,
Air Counterbalance,
Recirculating Lubrication System,
Hydraulic Clutch and Brake,
Recirculating Lube System,
T-slotted Ram and Bolster,
450 mm wide windows,
Updated Press Controls,
8 Point Gibbing.
 
  45
IDMA27425
MakeNiagara
ModelSE2-200-72-42UH
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity : 220 Tons US Tons,
Bed Area : 1800 x 1050 mm,
Slide Area : 1800 x 1050 mm,
Stroke : 150 mm,
Adjustment : 225 mm,
Shut Height : 700 mm over bed SDAU,
Strokes per Minute : 55-110,
Bolster : 125 mm thick,
Overall Height : 4525 mm floor to top of press,
Footprint : 2700 LR x 1750 FB mm,
Windows : 625 mm wide approx.
Equipped With :-
Trabon Recirculating Lubrication System,
Power Supply: 480V/60 HZ/ 3 Phase,
Vibration Isolation Levelers,
T-slotted Bolster and Ram,
Set of Shadow Light Curtains,
Set of Mini Safe STI Lite Curtains,
8 Point Gibbing,
Dynamatic Variable Speed Motor,
Loadgard Trend Series 4 Tonnage Monitor,
Wintriss DiPro 1500 Die Protection,
Wintriss Programmable Outputs,
Air Clutch and Brake Assembly,
Air Counterbalances.
 
  46
IDMA27424
MakeMinster
ModelP2-200-60
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 Tons,
Bed Area : 1500 x 1100 mm,
Stroke : 150 mm,
Adjustment : 150 mm,
Bolster thick T-Slotted : 175 mm,
Shut Height SDAU (over bed) : 625 mm,
Strokes per Minute : 45-90,
Windows : 550 mm wide,
Overall Height : 4400 mm floor to top of clutch tank,
Floor to top of Bolster : 1400 mm (vibromounts are 175 tall),
Floor Standing.
Equipped With :-
Air Clutch and Brake,
Air Counterbalances,
Vibration Isolation Levelers,
Recirculating Lube System,
T-Slotted Ram and Bolster,
T-slots on 150 mm centers-Standard 25 mm t-slots,
8 Point Gibbing,
Floor Standing Control Console,
Variable Speed Motor,
Motors and Controls,
Palm Buttons.
 
  47
IDMA27236
MakeSchuler German
ModelA2-125
YOM1972
ConditionGood Condition
PhotoSee Photo
Capacity : 125 tons,
Fixed stroke : 25 mm,
No of strokes per minute : 100 - 300 SPM,
Distance between columns : 1000 mm,
Distance table/ram, max.. stroke up, adjustment up : 400 mm,
Table surface area : 1150 x 1000 mm,
Hole in the table : 900 x 220 mm,
Table height over floor : 1200 mm,
Side window : 300 mm,
Ram surface : 1000 x 850 mm,
Slide drill hole x depth : 65 mm,
Ram adjustment : 60 mm,
Total power requirement : 33,0 kW,
Dimensions of the machine : 2.6 x 1.6 x 4.5 m,
Weight of the machine : 27000 kgs approx.
Additional information -
With infinitely variable drive, pneum. clutch, pneum. slide counterbalance, motorised slide adjustment, circular oil lubrication, operator's pendant control, electrical cabinet. Mounted on 2 steel plates with Barry mounts attached.
 
  48
IDMA26980
MakeMinster
ModelP2-200-54
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 tons,
Stroke per minute : 0-300 mm,
Stroke of slide : 50 mm,
Maximum adjustment of slide : 150 mm,
Cushion stroke : 25 mm,
Shut height : Bolster : stroke down adj. up (under cushion plate) : 350 mm,
Bed : 600 mm,
Max / min width : 25 - 150 mm,
With Speed COntrol,
With Manuals.
 
  49
IDMA26975
MakeMinster
ModelP2-200-60-44
YOM1969
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 100 mm,
Ram adjustment : 150 mm,
Shut height : 675 mm,
Bed area : L-R 1500 x F-B 1100 mm,
Slide area : L-R 1500 X F-B 625 mm,
Speed : 0-150 SPM,
Windows : 675 mm,
O.A.D : 3125 mm,
L-R 2125 mm and F-B 4050 mm,
Approx Weight : 67,450 LBS.
8 Point gibbing,
Air clutch and brake,
Air counterbalances,
T-Slotted bolster and ram,
Auto lube systems,
Dual palm buttons,
Control console,
Floor standing.
 
  50
IDMA26795
MakeAIDA,Japan
ModelPDA30(1)
YOM
Conditionworking condition ,under power
PhotoSee Photo
Capacity: 300 ton,
Stroke: 60 mm,
Strokes per minute: 50-160,
Die height: 600 mm,
Slide adjustment: 80 mm,
Slide area: 1700x800 mm,
Bolster area: 1700x800 mm.
Main motor: 37 kW
 
  51
IDMA24138
MakeZTS Kosice Sloakia
ModelA2-200/360
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Distance between columns : 1450 mm,
Table size : 1350 x 1100 mm,
Slider size : 1250 x 900 mm,
Slider travel : 30 mm,
Distance between slider and table : 400 mm,
Table thickness : 180 mm,
Table slot : 1160 x 360 mm,
Number of traverse in slider 4,
Cushion travel : 4 mm,
Cushion capacity : 20 ton,
Max. work piece thickness : 0.5 mm,
Strokes per minute 100...350,
Main drive power : 30 kW,
Weight of the press : 41000 kg (without accessories)
Feeder and straightener technical specifications :-
Max. strip width : 360 mm,
Max. inner diameter coil strip : 1200 mm,
Inner range of strip diameter : 500...610 mm,
Max. strip thickness : 0.5 mm,
Travel of upper rolls : 6 mm,
Max. coil weight : 3000 kg,
Unroll speed of coil : 0.1...60 m/min,
Motor : 3 kW,
Weight : 2200 kg.
Accessories :-
Uncoiler A2 HR 360-2.
Feeding device W8-250.
Shearing device AS 3 250.
Stacking device SV 4.
 
  52
IDMA22269
MakeAIDA,Japan
ModelPDA12L
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity : 125 ton,
Stroke : 30 mm,
Table : 1100 x 800 mm,
Stroke Per Minute : 120 – 300.
 
  53
IDMA19869
MakeMOLL
ModelEP250
YOM1991
ConditionGood Condition
PhotoSee Photo
pressure 250 ton, stroke 40 mm, no. of strokes 60 - 220 Hub/min, distance between columns 620 mm, distance table/ram, max. stroke up, adjustment up 400 mm, table surface area 600 x 620 mm, hole in the table 300 x 300 mm, column travel -side mm, ram surface 600 x 500 mm, ram drills x depth mm, ram adjustment 150 mm, material width max. 300 mm, material thickness of feeder mm, feed length 0 - 100 mm, total power requirement 30 kW, weight of the machine ca. 9,8 tons, dimensions of the machine ca. 2 x 2 x 4 m.
 
  54
IDMA19299
MakeBruderer
ModelBSTA25E
YOM1983
ConditionGood Condition
PhotoSee Photo
Capacity : 25 Ton,
Table size : 530 x 530 mm,
 
  55
IDMA19201
MakeKaiser
ModelV250WR
YOM1989
Conditioncan be inspected under power
PhotoSee Photo
Capacity - 250 tons, Table - 2240 x 1250 mm, 25-150 Strokes / Min.
 
  56
IDMA18837
MakeYamada Dobby
ModelFP110SW
YOM1991
ConditionGood Condition
PhotoSee Photo
Capacity: 110t,
Stroke : 25 mm,
SPM : 150-800,
Shut height : 270 mm,
Adjustment : 50 mm,
Table size: 1200x800 mm,
Slide size : 1200 x 600 mm,
Bolster opening : 1100 x 100 mm,
Motor Power : 37 kW.
Material width 80 mm,
With oil cooling device.
 
  57
IDMA18754
MakeBruderer
ModelBSTA60HSL
YOM1988
ConditionGood Condition
PhotoSee Photo
60 tons, strokes per min 100-650, stroke length 19.67 - 75mm, slide adjustment 78.75mm, die height 260-287.5mm, distance between posts - front to back 315mm, left to right 777mm, bolster area 610x757mm, slide area 450x687mm, max punch width 295mm, max punch thickness 3.925mm, feed length 0-197.5, feed level 50-127.5mm, main motor 30 HP, machine weight 18,700 lbs, equipped with : Bruderer BBV Roll Feed, Hydrostatic vary speed drive
 
  58
IDMA18594
MakeBruderer
ModelBSTA69HSL
YOM1988
ConditionExcellent
PhotoSee Photo
Number of strokes 100 - 650 Hub/min
Material width 320 mm.
Double roll feed BBV-202/150. двусторонняя подача
Decoiler- Straightening Machine KOHLER
Hours-meter- 1000 hours
 
  59
IDMA15949
MakeRaster
ModelBPA75
YOM1987
ConditionVery good condition
PhotoSee Photo
75 tons , 120-600 SPM , ram stroke 10-50 mmm, minimal air pressure 5 bar , working table surface width 1110 x 610 mm,length 1250 x 750 mm, opening in table 750 x 200 mm, ram surface 960 x 350 mm, distnce between columns 750 x 620 mm, max diastance between ram and table 400 mm - 2 machines
 
  60
IDMA13663
MakeRaster
ModelBPA75
YOM1987/1989
ConditionVery good condition
PhotoSee Photo
75 tons,
Speed / min 120- 600,
Slider stroke 10 x 50 mm;
TAble 1250 x 750 mm;
Area inside table 750 x 200 mm;
Top part of slider 960 x 360 mm;
Distance tarp column 730 * 620 mm;
Slider adjustment 80 mm;
Workpiece stroke from table 100-130 mm;
Feeding step 5-150 mm;
Workpiece witdh 300 mm - 2 Nos.
 
  61
IDMA12884
MakeAIDA,Japan
ModelPDA30(1)
YOM1980
ConditionDismantled
PhotoSee Photo
Capacity: 300 tons,
Stroke: 60 mm,
Strokes per minute: 50-160,
Die height: 600 mm,
Slide adjustment: 80 mm,
Slide area: 1550x800 mm,
Cushion area: 1700x900 mm,
Cushion thickness: 200 mm,
Main motor: 37 kW x 4,
Pump motor: 0.75 kW x 4,
Motor for slide adjustment: 1.5 x 4 kV,
Motor for compressor: 3.7 x 4 kV,
Capacity of equip. for shering scrap: 4 tons,
Air pressure in main line: 4.5 kg/cm2,

Roll feed model: RCF-R52,
Feed direction: Left to right,
Feed length: 235 mm,
Feed length diapason: 200-300 mm,
Material width: 100 – 250 mm,
Material thickness: 1.0 – 1.6 mm,
Feed height: 330-370 mm,

Shears capacity: 4 tons,
Feeding length: 30 mm,

Decoiler: AFSR-3-M.
Roll diameter:
-internal: 508, 710 mm,
external: 1300 mm,
Roll weight: 3000 kg,
Drum diameter: 450-520 mm,
Electric motor: 0.4 kV,

Straightening device: LA 3028,
Blank width: 100-300 mm,
Blank thickness: 1.0 - 2.0 mm,
Working roll’s diameter: 57 mm.
 
  62
IDMA12883
MakeAIDA,Japan
ModelPDA50(2)
YOM1980
ConditionLittle used
PhotoSee Photo
500 tons, Stroke legth 80 mm,
Number of stroke per 1 minute 30-70 ,
Bolster area 2800x1350 mm,
Slide area 2800x1350 mm,
Die height (slide and adjustment in bottom position) 650 mm,
Slide adjustment 80 mm,
Main motor 45 kW.
 
  63
IDMA9333
MakeWeingarten
ModelHSZ250
YOM1968
ConditionGood Condition
PhotoSee Photo
250 tons ,
stroke 50 mm,
no. of strokes 70 - 210 stroke/min ,
distance between columns 1530 mm ,
max. distance table - ram 580 mm ,
table surface area 1480 x 950 mm ,
hole in the table 1000 x 400 mm ,
side window 820 mm ,
ram surface 1350 x 600 mm ,
ram drills x depth 65 x 100 mm ,
ram adjustment 80 mm ,
material width 90 - 385 mm ,
material thickness 1,5 mm ,
feed length 400 mm ,
total power requirement 30 + 3 kW ,
weight of the machine 36,5 t
dimensions of the machine 4,5 x 2,1 x 4,5 m,with engine, infinitely variable drive (make PIV), wheel-guard, slide adjustment engine, air-friction clutch, pneum.
slide counterbalance, central oil lubrication, one-sided mech. pincer''s feed device, control cabinet, electrical controls

top