Category : Sheet Metal

Sub-Category : Press Sheet Stamping Mechanical

Total Machines Found : 811

Select | Machine Details
 
  1
IDMA35047
MakeWMW Erfurt,Germany
ModelPKZZ250
YOM
ConditionGood Condition
PhotoSee Photo
Double Column Crank stamping Press
Completely overhauled.
Electric and Control- Not available (buyer need to equipped the press by new ones)
Capacity: 250 ton
Table 2500 x 1400 mm
Ram 2320 x 1250 mm
Distance between uprights 2525 mm
Window in table width 2300 mm
Window in table depth 850 mm
Stroke 400 mm
Strokes per minute -12 SPM
Adjustment of ram 120 mm
Shutheight 760 mm
Table cushion force 50 to
Cushion stroke 160 mm
Weight ca. 40 tons
 
  2
IDMA35022
MakeWMW,Zeulenroda
ModelPYE250S1
YOM
ConditionGood Condition
PhotoSee Photo
250T
Hydraulic Single Column Press
 
  3
IDMA35015
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Bed Area: 3600-2500
Ram 3600-2500
Shut Height: 1300
Adjustment: 600
Stroke: 800 mm
Front Moving bolster
Die Cushion 255 Tons
Stroke 275 mm
Motor 185 KW
Drive Mechanism :- Clutch and Brake
SPM :- 8~18
No. of Slide suspension points:- 4
No of Moving Bolster :- One
Micro Inching at full load :- yes
Cushion Type :-Cylinder Type
Cushion Table :-3000-2000mm
Cushion Pin Dia :- standard
 
  4
IDMA34994
MakeDanly
Model
YOM
ConditionGood working condition
PhotoSee Photo
H-frame
Type: two lateral moving bloster
Power:800 Ton
Number of conrods:2
Table dimensions X-Y:2743 x 1524
Slide dimensions (x-y):2743x1524
Stroke:812
Adjustment slide:598 mm
Light at tdc:1549
Strokes number
Strokes type Fixed
Strokes/min:20
Lateral window
Lateral window dimensions (x-y/mm):965
Cushion
Power:108 Ton
 
  5
IDMA34993
MakeDanly
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity:600 Ton
Number of conrods:2
Table dimensions X-Y:2438 x 1371
Slide dimensions (x-y):2438x1371
Stroke:610
Light at tdc:1920
Strokes number
Strokes type Fixed
Strokes/min:20
Lateral window
Lateral window dimensions (x-y/mm):838
Cushion
Power:101 Ton
 
  6
IDMA34992
MakeMuller Weingarten
Model
YOM2000
ConditionGood working condition
PhotoSee Photo
Capacity: 400 Ton
Number of conrods: 2
Table dimensions X-Y: 2200 x 1360
Slide dimensions (x-y):2000x1000
Stroke:150
Adjustment slide:150 mm
Light at tdc:540
Strokes number
Strokes type adjustable
Strokes/min Da 30 a 120
Accessories
Accessories
with arku feeding line width 400, thickness 6 mm
2 mold holders
 
  7
IDMA34991
MakeManzoni
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity:315 Ton
Number of conrods:2
Table dimensions X-Y:2600 x 1250
Slide dimensions (x-y):2500x1000
Stroke:80
Second value of the stroke:315
Adjustment slide:200 mm
Light at tdc:1365
Strokes number
Strokes type adjustable
Strokes/min Da 20 a 60
Motors
Motor power (kw) 96
Accessories
Accessories
electronic transfer
Overall dimensions
Weight:90
 
  8
IDMA34989
MakeArrasate
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Table: 2760 x 1560 mm,
Stroke: 400 mm,
18 Golpes por min,
Between columns; 2710 mm,
Power 50 CV
 
  9
IDMA34988
MakeSchuler German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Shut height: 1220 mm,
Slide adjustment: 325 mm,
Stroke: 835 mm,
Slide dimensions: 2750 x 1895 mm,
Bolster plate (bed)dimensions: 2750 x 1500 mm,
Height between bed to floor: 250 mm,
Bed cushion tonnage: 140 t
Bed cushion stroke: 250 mm,
Stroke per min: 12 to 24 spm,
Air pressure: De 5 to 7 kg /cm2
main engine power: 100 kw,
Automatism circuits: 3
Moving bolster: Front single bolster movement
Quantity: 2 nos
 
  10
IDMA34949
MakeFarina,Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Power 400 tons
Strokes per minute 20
Closed die height 1002 mm
Feeder plan height 500 mm
Fixed slide stroke 400 mm
Press plan dimension 2030 x 1260 mm
Slide dimension 2130 x 1260 mm
Front light uprights 2040 mm
Lateral light uprights 480 mm
Slide adjustment no
Max distance plan‐ slide 1400 mm
Extraction rod stroke 200 mm
Max width belt 480 mm
Number of lower cushions 2
Max extraction of upper cams 220 mm
 
  11
IDMA34945
MakePels
ModelPKE800
YOM
ConditionGood Condition
PhotoSee Photo
Pressure - 800 T
Table Size - 1400 x 950 MM
Slider size - 1000 x 750 MM
Open Height - 800 MM
Adjustment slider - 140 MM
Stroke Slide - 160 MM
Plate Thickness - 140 MM
Flywheel speed - 500 Per minute
Power motor - 50 hor.
Weight machines - 56,500 KG
there are two such presses available
 
  12
IDMA34918
MakeSchuler German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1100 Tons
Bed Area: 199” x 100”
Shut Height: 65”
Adjustment: 13”
Stroke: 25”
Rolling Bolster
Weight 250 tons
FB moving bolsters
 
  13
IDMI7834
MakeSchuler German
ModelP2E2Sqs500/2.9/0.65
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity: 600/500 ton,
Bed size: 2900 x 1400 mm,
Ram area: 2900 x 1400 mm,
Strokes per minute: 12-16
Daylight: 650 mm,
Shut height: 500 mm,
Die cushion tonnage: 70 tons,
Press dimensions: 9m x 3 m x 1.5 m,
Press weight: 120 tons,
Standard accessories:
Hydraulic over load protector,
electrical driving slide adjust device,
Slide balancers
Angle display
High performance clutch and brake
Electrical automatic lubrication system,
Pneumatic die cushion device
Photo electronic safety device with inter lock
ouch pad counter system
7inch touch screen
DC motor with advanced EMERSON Mentor MP420A DC Drive
PLC control panel with safety alarm and protections.
 
  14
IDMA34890
MakeAIDA,Japan
ModelNC2-250(2)
YOM1986
ConditionGood Condition
PhotoSee Photo
C Frame Press
Capacity:250 ton
Stroke:280 mm
SPM:20 - 35
Die Height:550 mm
Adjust:120 mm
Slide:2100 x 700 mm
Bolster:2700 x 950 mm
 
  15
IDMA34830
MakeAIDA,Japan
ModelC2-20
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type:C Frame Press
Make:Aida
Model:C2-20
Capacity:200 ton
Stroke:250 mm
SPM:24 - 42
Die Height:500 mm
Adjust:110 mm
Slide:1850 x 650 mm
Bolster:2420 x 840 mm
Machine Type:Uncoiler
Make:Aida
Model:LFS-40R4
Coil Weight:3000 kg x 2
Coil Diameter:600 - 1300 mm
Coil Width:100 - 400 mm
Machine Type:Leveler Feeder
Make:Aida
Model:LFS-40R
Coil Width:100 - 400 mm
Thickness:0.5 - 4.5 mm
Coil Diameter:600 - 1300 mm
Feed Length:25 - 400 mm
Feed SPM:25 -45
 
  16
IDMA34803
MakeArisa
Model
YOM2001
ConditionGood Condition
PhotoSee Photo
Capacity:1250 ton,
TABLE 6000 X 2300 MM
CUSHION 63 TM
REGULATION 400 MM
STROKE 900 MM
8-20 GOPES/MIN.
DAYLIGHT 1200 MM
POWER 200 KW
 
  17
IDMA34741
MakeWMW Erfurt,Germany
ModelPKZZI315-2500
YOM
ConditionGood Condition
PhotoSee Photo
Max Capacity : 315 ton,
Table size : 2500 x 1400 mm,
Slide stroke : 400 mm,
Slide stroke per 1 min : 25,
Slide adjustment : 400 mm,
Slide area : 2450 x 1400 mm,
Distance between columns : 2500 mm,
Table height over floor : 480 mm,
Daylight : 1080 mm,
Shut height (stroke down-adjustment up): 900 mm,
Die cushion capacity : 63 ton,
Die cuschion stroke : 160 mm,
Voltage : 380 V,
Main motor power : 45 kW,
Total power requirement: 70 kW,
Press dimensions : 4300 x 2500 x 6000 mm,
Weight of the machine : 60 ton
 
  18
IDMA34702
MakeWMW Erfurt,Germany
ModelPKNT315/1400
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Capacity:315 t,
External ram effort: 125 t,
Internal ram effort: 190 t,
Table size :1400Χ1400 mm,
Drawing ram size: 900Χ900 mm,
Sheet clamping ram size: 1350Χ1350 mm,
Shut height: 770 mm,
Adjustment: 165 mm,
Drawing unit effort: 50 t,
Drawing depth :315 mm,
Internal ram stroke: 670 mm,
Number of strokes per minute 8,
Main motor power 32 kW
 
  19
IDMA34668
MakeKaiser
Model
YOM
ConditionGood Condition
PhotoSee Photo
H- frame mechanical press 2 points
Power ( ton ) 250
Table dimensions ( x-y/mm) :1500x1100
Slide dimensions ( x-y/mm): 1500x900
Stroke ( x/mm) : 150
Stroke per minute: from 30 to 150
Feeding line Arku
Width ( x/mm) : 600
Thickness ( x/mm) : 2,5
 
  20
IDMA34660
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type: C frame Press
Model: C2-20
Capacity: 200 ton,
Stroke: 250 mm,
SPM: 24-42
Die height: 500 mm,
Adjust: 110 mm,
Slide: 1850 x 650 mm,
Bolster: 2420 x 840 mm,
Machine Type: Uncoiler
Make: Aida
Model: LFS-40R4
Coil weight; 3000 kg x 2
Coil diameter: 600-1300 mm,
Coli width: 100-400 mm,
Machine Type: Leveler Feeder
Make: Aida
Model; LFS-40R
Coil width: 100-400 mm,
Thickness: 0.5-4.5 mm,
Coil diameter: 600-1300 mm,
Feed length: 25-400 mm,
Feed SPM: 25-45
 
  21
IDMA34655
MakeWMW Erfurt,Germany
ModelPKZZ250/2500
YOM1972
ConditionGood Condition
PhotoSee Photo
Capacity : 250 tons,
Ram stroke : 400 mm,
No. of strokes : 25/min.,
Ram adjustment : 120 mm,
Shut height : 720 mm,
Bed 2500 x 1400 mm,
Windows in bed : 2300 x 850 mm,
Ram : 2320 x 1250 mm,
Main drive motor : 32 kW.
 
  22
IDMA34624
MakeROVETTA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton slide stroke 300 mm - stroke par minute 18 - Adjustment of the slide 200 mm
dimension table 1600 x 1220 mm
 
  23
IDMA34529
MakeWMW Erfurt,Germany
ModelPKZZI315.1FS
YOM
ConditionGood Condition
PhotoSee Photo
Max. capacity: 315 tons
Table size: 2500x1400 mm
Slide stroke: 400 mm
Slide stroke per 1 min: 25
Slide adjustment: 400 mm
Slide area: 2450x1400 mm
Distance between columns: 2500 mm
Table height over floor: 480 mm
Daylight: 1080 mm
Shut height (stroke down-adjustment up): 900 mm
Die cushion capacity: 63 tons
Die cuschion stroke: 160 mm
Voltage: 380 V
Main motor power: 45 kW
Total power requirement: 70 kW
Press dimensions: 4300x2500x6000 mm
Weight: 60 tons
 
  24
IDMA34525
MakeMuller Weingarten
ModelSL4-1500-4000-2600
YOMMarch 2000
ConditionGood Condition
PhotoSee Photo
Capacity: 15000 kN (1686 Short Tons)
Bed Area: 4000mm x 2600mm
Stroke: 450mm
Shut Height: 1200mm
Adjustment: 150mm
Speed: 10 – 40 SPM
Equipped with: Dual Front Moving Bolsters
 
  25
IDMA34524
MakeVerson
ModelTL-SE4-2000-226-108T
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 2000 Tons
Slide Area: 216” x 108”
Bolster Area: 226” x 108”
Stroke: 30”
Shut Height: 87”
Adjustment: 2”
Speed: 8 - 24 SPM
 
  26
IDMA34523
MakeAmada,Japan
ModelTP-200C-X2
YOM
ConditionGood Condition
PhotoSee Photo
SINGLE CRANK C-TYPE PRESS
Capacity: 200 TON
S.P.M: 25-45
Stroke: 250mm
Die height: 460mm
Slide Adjustment: 110mm
Slide Area: 850 x 630mm
Bolster Area: 1450 x 850mm
Supply air pressure:5kgf/cm2
Sudden stop time: 245ms
Cushion capacity: 14 TONCapacity: 200 TON
S.P.M: 25-45
Stroke: 250mm
Die height: 460mm
Slide Adjustment: 110mm
Slide Area: 850 x 630mm
Bolster Area: 1450 x 850mm
Supply air pressure:5kgf/cm2
Sudden stop time: 245ms
Cushion capacity: 14 TON
 
  27
IDMA34522
MakeKomatsu
ModelOBS110-2
YOM1985/2007
ConditionGood Condition
PhotoSee Photo
Capacity: 110 TON
Stroke: 200mm
S.P.M: 50
Die height: 355mm
Slide Adjustment: 100mm
Slide Area: 600 x 450mm
Bolster Area: 1100 x 700 x 130mm
Sudden stop time: 184ms
Cushion capacity: 8 TON
 
  28
IDMA34511
MakeWMW Erfurt,Germany
ModelPKZZ250/2500
YOM1959
ConditionGood Condition
PhotoSee Photo
Pressure - 250 tones
Slider's travel - 400 mm
Table - 2500x1400 mm
 
  29
IDMA34378
MakeFMI Mecfond
ModelS2-400-2800x1600
YOM1973
ConditionGood Condition
PhotoSee Photo
Nominal Power: 400 ton
Stroke: 600 mm
Distance between mold-holder and slide : 1300 mm
Adjustment: 300 mm
Slide dimensions: 2800 x 1600 mm
Strokes per minute (continuous): 20 mm
Strokes per minute (intermittent): 15 mm
Clutch air pressure: 4,2 Kg/cm2
Cushion features
Mod: 2-B-38”12
Number of cushions: 2
Number of openings in the base: 2
Stroke: 300 mm
Cushion diameter: 38”
 
  30
IDMA34377
MakeClearing Innocenti
ModelS2 400-108-60
YOM
ConditionGood Condition
PhotoSee Photo
Power: 400 tons
Cushions characteristics
Number of cushions: 2
Cushions dimensions: 1143 x 990 mm
Number of openings in the bench: 2
Cushions pressure: 70 tons (at 5kg / cm3 _air press.)
Cushions Stroke: 203 mm
Cylinder diameter: 914.4 mm
 
  31
IDMA34376
MakeClearing Innocenti
ModelS2 400-108-60
YOM
ConditionGood Condition
PhotoSee Photo
Power: 400 tons
Stroke:610 mm
Minimum distance BTWN bench and slide: 1118 mm
Adjustment: 305 mm
Left-right front-back dimensions: 2743 x 1524 mm
Strokes per minute: 20
Characteristic of the extractor mber of extractors: 2
Number of openings in the bench: 2
Extractor pressure: 65 T.m. (at 5 Kg / cm2)
Extractor stroke: 203 mm
Cylinder diameter: 914.4 mm
 
  32
IDMA34375
MakeInnocenti
ModelF4450-132
YOM1970
ConditionGood Condition
PhotoSee Photo
Dimension table 3350 x 2134 mm
Stroke of the slide 610 mm
Slide adjustment 203 mm
Distance between workbench and slide
Stroke down, adjustment up 1219 mm
Strokes per minute 12/16 mm
Extractor stroke 200 mm
 
  33
IDMI7646
MakeRavne,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Slide stroke: 400 mm,
Shut height: 700 mm,
SPM: 18
Bolster area: 2500 x 1250 mm,
Slide adjustment: 150 mm,
Cushion : Yes
 
  34
IDMA34366
MakeWMW Erfurt,Germany
ModelPKZV(I)800FS
YOM1977
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton
 
  35
IDMA34314
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton
Stroke:600 mm
SPM:14
Die Height:600 mm
Bolster:2130 x 1870 mm
Slide:1900 x 1200 mm
Adjust:200 mm
Die Cushion:50 ton
Cushion stroke:300 mm
Pad:810 x 880 x 2
 
  36
IDMA34285
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capasity : 300ton
Stroke : 620mm
SPM : 20
Adjust : 500mm
Die Height : 1100
Slide : 2500mm x 1520mm
Bolster : 2500 x 1520
Die Cusion : 60ton
Cusion Stroke : 0-300mm
Pad size : 1080 x 2050mm
 
  37
IDMI7636
MakeVerson
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
H frame
Capacity: 300 ton
Bed area.950*1000mm
Shut height .430 mm
Stroke length . 310 mm
Ram screw length .80 mm
 
  38
IDMA34238
MakeRovetta,Italy
Model
YOM1987
ConditionGood Condition
PhotoSee Photo
Capacity:400 ton
Stroke of the slide 305 mm
Stroke per minute 18-36 n
Adjustment of the slide: 254 mm,
Dimensions of bolster 2740x1070 mm
Dimensions of slide 2740x1070 mm
Distance between uprights 2800 mm
Thickness of bolster 180 mm
Stroke of cushion 150 mm
Shut height (Stroke down, adjustment up): 800 mm,
Opening in the bed: 5 n
Opening per K.O bars: 10 n,
Opening in the uprights: 1300-800 mm,
Main motor: 75 kW
Adjustment motor of the slide: 3,7 kW,
Cushion: 5 x 2 n,
Total cushions capacity (at 16 bars): 1000 kN,
Dimensions of single pressure pad: 650 x 240 mm
 
  39
IDMA34226
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 300 ton
Stroke : 300 mm
SPM : 25 - 50
Die Height : 900 mm
Adjust : 200 mm
Bolster : 2500 x 1500 mm
Slide : 2480 x 2480 mm
Machine Type : Uncoiler
Make : Aida
Coil External Diameter : 800 - 1800 mm
Coil Internal Diameter : 508 mm
Coil Width : 300 - 1300 mm
Coil Weight : 15,000 kgs
Machine Type : Leveller
Make : Aida :
Material Width : 300 - 1300 mm
Material Thickness : 2.3 - 3.2 mm
Work Roller : 80 x 1350 mm
Number of Rollers : 4 up, 5 down
Pinch Roller : 150 x 1350 mm
Number of Pinch Rollers : 2
Machine Type : Feeder
Make : Aida
Material Width : 460 - 120 mm
Material Thickness : 0.6 - 3.2 mm
Feed Stroke : 50 - 1000 mm
Feed SPM : 20 - 40
 
  40
IDMI7620
MakeSchuler
Model
YOM
ConditionGood Condition
PhotoSee Photo
Bed size: 750*800 mm
 
  41
IDMA34197
MakeAIDA,Japan
ModelPMXL2-300(1)
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton
Stroke x spm : 90mm x 60 ~ 150 spm
Die height : 500 mm
Slide adjustment : 90 mm
Bolster area : 1850 x 1000 mm
Main motor : 37 Kw
Quantity: 2 nos

Note : Coil line is not available
Delivery : After 20th May, 2021
 
  42
IDMA34195
MakeWeingarten
Model
YOM
ConditionGood Condition
PhotoSee Photo
Power ( ton ) :450
Table dimensions ( x-y/mm) :2500x1200
Slide dimensions ( x-y/mm) :2500x1200
Stroke ( mm) :from 18 to 212
Stroke per minute from 30 to 212
 
  43
IDMA34177
MakeBritish Clearing
ModelF-4350-84
YOM
ConditionGood Condition
PhotoSee Photo
CAPACITY:350 TONS
BED AREA:2150 x 1280 mm
STROKE ADJUSTMENT:508 mm
STROKE LENGTH:410 mm
STROKE OF CUSHION:203.2 mm
STROKE PER MIN:15
SHUT HEIGHT:1092.2 mm
DISTANCE BETWEEN COLUMN:2250 mm
PLUS
DIE CUSHION
SAFETY GUARDS
MODERN ELECTRICAL PANEL
FULL WORKING ORDER
 
  44
IDMA34172
MakeBritish Clearing
Model
YOM1978
ConditionGood Condition
PhotoSee Photo
4 CRANKS
TABLE 3050 X 1370 MM
CAR 3050 X 1370 MM
SIDE WINDOWS 750 MM
STROKE 600 MM
ADJUSTAMENT 460 MM
CONTINUOUS SPEED 20 SPM
POWER 55 KW
TOTAL HEIGHT 7200 MM
 
  45
IDMA34171
MakeBritish Clearing
Model
YOM1978
ConditionGood Condition
PhotoSee Photo
TABLE 2750 X 1500 MM
SIDE WINDOWS 750 MM
4 CRANKS
CONTINUOUS SPEED 24 SPM
STROKE 400 MM
ADJUSTAMENT 300 MM
CLOSING HEIGHT 815 MM
CAR 2500 x 1375 MM
POWER 35 KW
TOTAL HEIGHT 6.500 MM
 
  46
IDMI7529
MakeAttenzione Allen Mani
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity: 150 ton,
Bed size: 630 x 1200 mm,
Shut height: 500 mm,
 
  47
IDMI7520
MakeMankoo India Pvt Ltd
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 150 ton,
Bed area L-R x F-B:1016 x 665 mm,
Bed to ram distance: 590 mm,
Stroke length: 130 mm,
Shank hole: 57 mm,
No. of slide strokes: 35
Height from floor to top of bed: 850 mm,
Bed opening (dia): 150 mm,
Motor rating: 15 HP 1440 RPM,
Standard Accessories
Pneumatic clutch and brake
3 Phase 440 V electric motor
Control panel with inch single stroke & continuous mode
FRL & Pneumatic fittings
Lubrication Pump
Photo electric hand safety guards.
 
  48
IDMA34088
MakeAIDA
ModelPDM-20W
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
H Frame Press
Make-Aida
Model-PDM20W
Capacity-200 ton
SPM-20
Stroke-300 mm
Die Height-850 mm
Adjust-430 mm
Slide-1830 x 1000 mm
Bolster-2000 x 1220 mm
Die Cushion-35 ton
Cushion Stroke-150 mm
Cushion Pad-700 x 700 mm
 
  49
IDMA34087
MakeShinohara
ModelPL-350
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
H Frame Press
Capacity-350 ton
SPM-16
Stroke-400 mm
Die Height-975 mm
Adjust-200 mm
Slide-2320 x 1300 mm
Bolster-2500 x 1440 x 200 mm
Die Cushion-28 ton
Cushion Stroke-230 mm
Cushion Pad-960 x 920 mm
 
  50
IDMA34086
MakeAIDA
ModelNC1-11(2)B
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type C Frame Press
Make-Aida
Model-NC1-11(2)B
Capacity-110 ton
SPM-35 - 65
Stroke-180 mm
Die Height-350 mm
Adjust-90 mm
Slide-630 x 520 mm
Bolster-1070 x 680 mm

Machine Type Uncoiler Leveler Feeder
Make-Orii
Model-LCC03KRSAX-TTS
Length-320
Thickness-0.3-3.2
 
  51
IDMA34084
MakeAIDA
ModelNC1-150(2)
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type C Frame Press
Make-Aida
Model-NC1-150(2)
Capacity-150 ton
SPM-30 -55
Stroke-200 mm
Die Height-400 mm
Adjust-100 mm
Slide-700 x 580 mm
Bolster-1170 x 760 mm

Machine Type Uncoiler Leveler Feeder
Make-Yutani
Model-FD1-40
 
  52
IDMA34083
MakeAIDA
ModelNC2-200(2)
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Machine Type C Frame Press
Make-Aida
Model-NC2-200(2)
Capacity-200 ton
SPM-25 - 45
Stroke-250 mm
Die Height-450 mm
Adjust-110 mm
Slide-1850 x 650 mm
Bolster-2420 x 840 mm

Machine Type Uncoiler Leveler Feeder
Make-Aida
Model-LFS-60EⅡ
Thickness-0.5-4.5
Width-100-600
 
  53
IDMA34082
MakeAIDA
ModelNC2-250(2)
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Machine Type C Frame Press
Make-Aida
Model-NC2-250(2)
Capacity-250 ton
SPM-20 - 35
Stroke-280 mm
Die Height-550 mm
Adjust-120 mm
Slide-2100 x 700 mm
Bolster-2700 x 950 mm

Machine Type Uncoiler Leveler Feeder
Make-Orii
Model-LCC05HFTAX-EAS
Thickness-0.3-4.5
Width-50-500
 
  54
IDMA34079
MakeKomatsu
ModelOBW250-3
YOM
Condition
PhotoSee Photo
Machine Type C Frame Press
Make-Komatsu
Model-OBW-250-3
Capacity-250 ton
SPM-20 - 40
Stroke-300 mm
Die Height-550 mm
Adjust-120 mm
Slide-2100 x 700 mm
Bolster-2700 x 950 mm

Machine Type Uncoiler Leveler Feeder
Make-Orii
Model-LCC06HB2HAX-EAS
Length-620
Thickness-0.3-4.5
Width-600
 
  55
IDMA34077
MakeKomatsu
ModelOBW200
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Machine Type C Frame Press
Make-Komatsu
Model-OBW-200-2B
Capacity-200 ton
SPM-20 - 40
Stroke-250 mm
Die Height-500 mm
Adjust-120 mm
Slide-1850 x 650 mm
Bolster-2400 x 850
Machine Type-Uncoiler Leveler Feeder
Make-Orii
Model-LCC05HB3JAX-DTS
Length-520
Thickness-0.3-3.2
Width-500
 
  56
IDMI7456
MakeUSI Clearing
Model
YOM2005
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity:700 Ton, H-Type,Bed Size :- 3060 x 1830mm, Stroke Length :- 780mm, Max Shut Height :- 1530mm,Min. Shut Height :- 1410mm, Slide Adjustable :- 190mm, Cushion Pin Working 250mm,Day Light Of Machine 1500mm, Main Motor :- 100 HP, Slide Motor :- 7.5 KW,Lub Motor :- 1.5 HP
quantity: 1 nos
 
  57
IDMI7451
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 100 ton
 
  58
IDMI7450
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 150 ton
 
  59
IDMI7449
MakeWilkins & Mitchell
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
SINGLE BODY Capacity: 500 ton
SINGLE POINT/ DOUBLE GEARED
BED SIZE-1500*1100
SHUT HEIGHT- 600 MM
ADJUSTMENT- 150mm
WITH CUSHION
 
  60
IDMA34015
MakeFukui
ModelMDL500
YOM1986
ConditionGood Condition
PhotoSee Photo
Capacity:500 ton
Die Height:1100 mm
Stroke:788 mm
SPM:20
Slide:2700 x 1700 mm
Bed: 2700 x 1700 mm
Die Cushion:150 ton
Cushion Stroke:300 mm
Cushion Pad:2300 x 1250 mm
 
  61
IDMA34003
MakeAIDA,Japan
ModelNC1-2000(2)E
YOM2002
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
250 mm stroke x 25 ~ 45 spm
450 mm Die Height, 110 mm Adj.
15 Kw Motor
 
  62
IDMA34002
MakeKomatsu
ModelOBW250-2
YOM1990
ConditionGood Condition
PhotoSee Photo
C Type Press Coil Line
Press main specs,
Capacity:250
300 mm stroke x 20 ~40 spm
550 mm Die Height, 220 mm Slide Ad.
2700 mm x 950mm Bolster
14.1 Ton Air Die cushion

2.Uncoiler/Feeder
Make : Sonoruka
Model : DLF-3260
Coil: Max 3,000 Kg
OD/ID : 1200mm/508mm
Thickness : 0.6 ~ 3.2 x Wide : 100~600
(2.0 x 600/3.2 x 450, 3.2 x 240)
Feedings : 400 mm
Motor : 4.9 Kw, 200 V
 
  63
IDMA34001
MakeKomatsu
ModelH2F300
YOM2003
ConditionGood Condition
PhotoSee Photo  |  See Video
Servo Press
Capacity: 300 ton
Stroke:250 mm
Die Height:550 mm
Adjust:100 mm
Bolster:2150 x 1000
Slide:2150 x 900 mm
 
  64
IDMA33987
MakeAIDA,Japan
ModelPC7
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:75 ton
SPM:60
Stroke:160
Die Height:320 mm
Adjust:70 mm
Slide:540 x 400 mm
Bolster:950 x 500 mm
Die Cushion:9.8 ton
Cushion Stroke:90 mm
Cushion Pad:390 x 260 mm
Quantity: 3 nos
 
  65
IDMA33986
MakeAmada,Japan
ModelTP60
YOM
ConditionGood Condition
PhotoSee Photo
C Frame
Capacity:60 ton
SPM:48-54
Stroke:178 mm
Die Height:497 mm
Adjust:76 mm
Slide:460 x 340 mm
Bolster:815 x 535
With Die Cushion
 
  66
IDMA33985
MakeAmada,Japan
ModelTP110
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:110 ton
SPM:50
Stroke:200 mm
Die Height:370 mm
Adjust:100 mm
Slide:625 x 520 mm
Bolster:110 x 610 x 105 mm
With Die Cushion
 
  67
IDMA33984
MakeAmada
ModelTP150
YOM
ConditionGood Condition
PhotoSee Photo
C Frame
Capacity:150 ton
SPM:40
Stroke:203.2
Die Height:645 mm
Adjust:100 mm
Slide:495 x 560 mm
Bolster:1270 x 670 mm
Cushion Stroke:100 mm
Cushion Pad:576 x 350 mm
 
  68
IDMA33944
MakeKomatsu
ModelOBS150
YOM
ConditionGood Condition
PhotoSee Photo
Capacity - 150 ton
SPM - 20 - 55
Stroke - 250 mm
Die Height - 220 mm
Adjust - 100 mm
Table - 1250 x 800 mm
Slide - 700 x 550 mm
 
  69
IDMA33939
MakeAIDA,Japan
ModelPDM-20W
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:200 ton
Die Height:850 mm
Stroke:300 mm
SPM:20
Slide:1830 x 1000 mm
Bed:2000 x 1220 mm
With Die Cushion
 
  70
IDMA33931
MakeWMW Erfurt,Germany
ModelPKZV(1)800/4000
YOM1972
ConditionGood Condition
PhotoSee Photo
Max capacity of slide – 800 ton
Press stroke – 500 mm
Slide adjustability - 500 mm
Drawing depth - 200 mm
Table size – 4000 x 2500 mm
Idle strokes per minute – 14
Cushion table capacity – 160 t
Drawing device stroke – 200 mm
 
  71
IDMA33924
MakeAIDA,Japan
ModelPD20
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
Stroke per minute : 20,
Die Height : 650 mm,
Bolster : 2000 x 1200 mm,
Slide : 1830 x 1000 mm,
Adjust : 400 mm.
 
  72
IDMI7419
MakeRattan
Model
YOM
ConditionBrand New
PhotoSee Photo
C frame pneumatic Press
Capacity:200 Tons
Table:1300-800 mm,
Ram Plate 800-550
Stroke-150 mm,
Day light 700mm , Adjust 70 mm
 
  73
IDMI7418
MakeWilkins & Mitchell
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity: 250 ton,
Table 1350-850, Stroke 250 mm
Shut height 425 mm
Adjustment-100 SPM 28
With Die Cushion
Main motor -30hp
 
  74
IDMA33855
MakeTMP Voronezh Russia
ModelKB3537
YOM
ConditionGood Condition
PhotoSee Photo
Nominal force:500 ton
Slide stroke:250 mm
Slide strokes per minute:25
Table dimensions:1400 x 2500 mm
Max distance between table and slide in its lower position at the upper position of adjustment:750 mm
Size of distance adjustment between table and slide:250 mm
Press dimensions (Length х Width х Height):4130 х 2945 х 7200 mm
Press weight:69000 kg
 
  75
IDMA33839
MakeTMP Voronezh Russia
ModelKB3537
YOM
ConditionGood working condition
PhotoSee Photo
Nominal force:500 ton
Slide stroke:250 mm
Slide strokes per minute:25
Table dimensions:1400 x 2500 mm
Max distance between table and slide in its lower position at the upper position of adjustment:750 mm
Size of distance adjustment between table and slide:250 mm
Press dimensions (Length х Width х Height):4130 х 2945 х 7200 mm
Press weight:69000 kg
 
  76
IDMA33815
MakeAIDA,Japan
ModelNC1-110(2)
YOM1997
ConditionGood Condition
PhotoSee Photo
110 ton, Slide stroke:180 mm, Strokes/min:35-65 spm, Die height:350 mm, Slide adjustment:90 mm, Slide area: (L.R.xF.B.):630x520 mm, Bolster Area:1070x680 mm, Main motor:7.5x4 kw, Required Air pressure:5 kgf/cm2, Power supply:200v 50Hz
 
  77
IDMA33779
MakeWMW Erfurt,Germany
ModelPKZZIII315.1FS
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity:315 ton.
Ram stroke:400 mm.
Ram stroke per Min.::25
Ram adjustment:: 320 mm.
Shuth height: :750* mm.
Bed: 2500 x 1450* mm.
Ram: 2500 x 1450* mm.
Cushion in bed:
- stroke:160 mm
- stroke adjustment:160 mm
- Hold on capacity:630 kN
- Ejector capacity:
Main motor:55 kW
Height above floor level:7100 mm
Weight of press: 79 t.
 
  78
IDMA33754
MakeAIDA,Japan
ModelC2-20(2)
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
Stroke: 250 mm,
SPM: 25-50
Die height: 500 mm,
Adjust: 110 mm
Bolster: 2420 x 840 mm,
Slide: 1850 x 650 mm,
Die cushion: 5.9 tons,
Cushion Stroke: 90 mm
 
  79
IDMA33739
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Stroke: 300 mm,
SPM: 15-40,
Die height: 650 mm,
Adjust: 150 mm,
Bolster: 1200 x 1200 mm,
Slide: 1200 x 1100 mm,
Side opening: 800 x 700 mm,
Main motor: VS45 Kw
 
  80
IDMA33723
MakeAIDA,Japan
ModelNC2-200(1)
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
stroke length: 150 mm,
New load continuous stroke number: 35~70 Spm,
Die height: 450 mm,
Slide adjustment amount: 110 mm,
Main motor:22 kW,
Air supply pressure: 5 kgf/cm2
 
  81
IDMA33682
MakeAIDA,Japan
ModelPMXL2-300(1)
YOM1990
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton
Stroke:200 mm
SPM:40 - 100 mm
Die Height:550 mm
Adjust:100 mm
Bolster:1850 x 1000 mm
Slide:1850 x 880 mm
Machine Type
Leveller Feeder
Model:LF4032NC
Coil Width:100 - 400 mm
Thickness:0.8 - 4.5 mm
Coil Diameter:1200 mm
Max Feed Stroke:400 mm
 
  82
IDMI7310
MakeWilkins & Mitchell
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 250
Table: 1350-850,
Stroke: 200 mm
Shut height: 390
Adjustment-100
With Die Cushion
Main motor -30 hp
 
  83
IDMA33654
MakeSchuler
Model
YOM
ConditionGood Condition
PhotoSee Photo
2 SCHULER 800 TM MECHANICAL PRESS
TABLE 2800 X 1500 MM
STROKE 850 MM
SLIDE ADJUSTMENT 500 MM

5 SPECIAL TRANSPORT
EMPTY HEAD WITHOUT KINEMATICS
6000 MM LENGTH X 2240 MM WIDTH X 2400 MM HEIGHT & WEIGHT 35 TM
CAR
3100 MM LENGTH X 2240 MM WIDTH X 2500 MM HEIGHT & WEIGHT 30 TM
BASE
4600 MM LENGTH X 4200 MM WIDTH X 2000 MM HEIGHT & WEIGHT 30 TM
2 X MONTANTES
6000 MM LENGTH X 2970 MM WIDTH X 1300 MM HEIGHT & WEIGHT 15 X 2 TOTAL 30 TM
+ 5 CONTAINERS OPEN TOP 40 “
 
  84
IDMA33651
MakeVerson
Model
YOM
ConditionGood Condition
PhotoSee Photo
250 TON CAPACITY,
72" X 52" BED,
36" SHUT HEIGHT
HYDRAULIC CUSHION,
16" STROKE,
13-1/2" X 11-3/4" WINDOW
 
  85
IDMI7305
MakeVerson
Model
YOM
ConditionGood Condition
PhotoSee Photo
400 TON CAPACITY,
108" X 60" BED SIZE,
18" STROKE,
13/18 SPM,
27" SHUT HEIGHT ADJUSTABLE DOWN,
12" ADJUSTMENT,
80 TON CUSHION,
9" STROKE,
22" X 36" WINDOWS,
180,600 LBS.
 
  86
IDMI7304
MakeBliss
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 100 ton,
MDL: 92 1/2-48,
Bed: 825 x 1200 mm,
W/Single crank control
Stroke: 175 mm,
Shut height: 287.5 mm,
Cushions
 
  87
IDMI7303
MakeVerson
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:125 ton,
36 SPM,
39" x 30" BED,
18" SHUT HEIGHT
 
  88
IDMI7299
MakeBliss
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton
58 x 35
Adjustment: 4.5"
Shut height: 17.5"
Stroke: 8"
With cushion
 
  89
IDMI7298
MakeClearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
Bed size: 110 x 2100 mm,
Shut height: 1150 mm,
Stroke: 400 mm,
Adjustment: 150 mm,
SPM: 14
25 HP
Window: 300 x 350 mm
Cushions
 
  90
IDMA33640
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
H frame
Capacity: 200 ton
Bolster: 2000 x 1220
Slide:1830 x 1000 mm
Stroke:300 mm
SPM:15 - 25
Die Height:850 mm
Adjust:430 mm
Main Motor:22 Kw
Die Cushion:16.7 x 2
 
  91
IDMA33563
MakeKomatsu
ModelE2W-250
YOM2006
Condition
PhotoSee Photo
Capacity

250 ton

Stroke

300 mm

SPM

22 - 44

Die Height

550 mm

Adjust

120 mm

Bolster

2400 x 950 mm

Slide

2100 x 700 mm
 
  92
IDMA33561
MakeAIDA,Japan
ModelC1-11(2)
YOM
ConditionGood Condition
PhotoSee Photo
Capacity :110 ton
Stroke:180 mm
Die Height:350 mm
SPM:35 - 65
Adjust:90 mm
Bolster:1080 x 680 mm
Slide:600 x 520 mm
Cushion Capacity:9.8 ton
Pad Size:480 x 300 mm
Cushion Stroke:80 mm
 
  93
IDMA33545
MakeKomatsu
Model
YOM2007
ConditionGood Condition
PhotoSee Photo
Press is still in factory but currently not in production
L4S1500 link motion model, 2 side moving bolsters & it has a die cushion
Machine Type

Mechanical Press

Make

Komatsu

Capacity

1500 ton

Stroke

900 mm

SPM

18

Die Height

1250 mm

Adjust

400 mm

Bolster

3400 x 2000 mm

Slide

3400 x 2000 mm

Die Cushion

300 ton

Cushion Stroke

300 mm

Cushion Pad

2930 x 1510 mm

PHOTOS ON REQUEST
 
  94
IDMA33541
MakeMuller
Model
YOM1980
ConditionGood Condition
PhotoSee Photo
Power : 2000 ton
Number of pistons : 4
Table dimensions x-y : 4000x2600
Slide dimensions x-y : 4000x2600
Stroke : 1380
Light at tdc : 2300
Cushion
Power : 300 ton
Stroke : 380 ton
Conditions :
Machine conditions : working
Electric plant conditions : working
 
  95
IDMA33526
MakeKomatsu
ModelE2P400
YOM1988
ConditionGood Condition
PhotoSee Photo
CAPACITY: 400t
STROKE: 250mm
SPM: 15 – 25
DIE HEIGHT: 450mm
BOLSTER M2: 2500mm X 1700mm
With DIE CUSHION (2PADS)
 
  96
IDMI7286
MakeEngland
Model
YOM
ConditionGood Condition
PhotoSee Photo
DOUBLE SIDED PRESS
STEEL BODY
DIE CUSHION
BED SIZE: 1400 X 1000 mm
 
  97
IDMA33498
MakeKomatsu
ModelE2W250-K3
YOM2006
Condition
PhotoSee Photo
STROKE: 300mm
SPM: 22 - 44
DIE HEIGHT: 550mm
BOLSTER M2: 2400 X 950 mm
With DIE CUSHION (1pad)
 
  98
IDMA33487
MakeKomatsu
ModelOBW200
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton
SPM : 30 - 50
Stroke:250 mm
Adjust: 120 mm
Die Height: 500 mm
Bolster: 2400 x 800 mm
Slide: 1850 x 800 mm
 
  99
IDMA33485
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton
Stroke: 500 mm
Shut Height: 1440 mm
SPM: 15
Adjust: 400 mm
Moving Bolster: 3400 x 1500 mm
Slide: 3400 x 1500 mm
Cushion Capacity: 60 ton, 2 pad
Cushion Stroke:250 mm
 
  100
IDMI7280
MakeSchuler German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Pneumatic press
Capacity: 150 ton
 
  101
IDMI7279
MakeGodrej,India
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 100 ton
 
  102
IDMA33477
MakeAmada
ModelTPW300
YOM1997
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 300 ton
Stroke : 250mm
SPM : 15 - 30
Die height : 550mm
Bolster M2. 2800 X 880mm
+
Leveler feeder
 
  103
IDMA33428
MakeSeyi,Taiwan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton
Stroke : 250 mm
Die Height : 600 mm
Slide Adjust : 200 mm
Breaking timing : 258 m.s.
 
  104
IDMA33427
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Specification attached in photos.
 
  105
IDMA33426
MakeSeyi,Taiwan
ModelSNC110
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 110 Ton
 
  106
IDMA33425
MakeSHIEH YIH
ModelSNC200
YOM1990
ConditionGood Condition
PhotoSee Photo
Capacity : 200 Ton
Stroke : 220 mm
SPM : 25-45 mm
Die Height : 450 mm
Ram Adjustment : 110mm
 
  107
IDMA33423
MakeKomatsu
ModelOBS150-3
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 Ton
Number of slide strokes : 40spm
Slide stroke : 200mm
Die Height : 450mm
Slide adjustment : 100mm
Slide dimensions : 700x550mm
 
  108
IDMA33422
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 ton
 
  109
IDMA33421
MakeKomatsu
ModelOBS200-3
YOM1990
ConditionGood Condition
PhotoSee Photo
Specification attached in photos.
 
  110
IDMA33420
MakeClearing-Niagara
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton
Max rated capacity : 25
Stroke : 8
Shut Height : 32
Slide Adjustment : 11
Bed area L-R F-B : 84x48
Slide area L-R F-B : 84x48
Stroke per min : 40-80
 
  111
IDMA33417
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1)Model:80
Make:Aida
2)Model: TP60Si
Make: Amada
3)Model: TP110EX
Make: Amada
4)Model:110
Make: Aida
 
  112
IDMA33398
MakeWMW Erfurt,Germany
ModelPKZZ315.1/2500FS
YOM
ConditionGood Condition
PhotoSee Photo
Max. capacity: 315 tons
Table size: 2500 x 1400 mm
Slide stroke: 400 mm
Slide stroke per 1 min: 25
 
  113
IDMA33383
MakeAIDA,Japan
Model
YOM1992
ConditionGood Condition
PhotoSee Photo
Type : C Frame Press
Capacity : 250 ton
Stroke : 280 mm
SPM : 20 - 35
Die Height : 550 mm
Adjust : 120 mm
Bolster : 2700 x 920 mm
Slide : 2100 x 700 mm
 
  114
IDMA33377
MakeWMW Erfurt,Germany
ModelPKZZ250
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton
Table surface : 2500 x 1400 mm
Ram surface : 2320 x 1240 mm
Table height over floor : 560 mm
Stoke of the ram : 400 mm
 
  115
IDMA33358
MakeAIDA,Japan
ModelNC2-250(2)
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity: 250 ton
Stroke: 280 mm
SPM: 20 - 35
Die Height: 550 mm
Adjust: 120 mm
Bolster: 2700 x 920 mm
Slide:2100 x 700 mm
 
  116
IDMA33338
MakeReimei
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:500 ton
Stroke:600 mm
SPM :18
Die Height:1005 mm
Adjust:350 mm
Bolster:3000 x 1600 mm
Slide:2820 x 1600 mm
Die Cushion:1 pad, 2 cylinders
Capacity:100 tons
Cushion Stroke:300 mm
Cushion Pad:24520 x 1300 mm
 
  117
IDMA33337
MakeAIDA,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Machine Type: Mechanical Press
Make: Aida
Capacity: 350 ton
Stroke:200 mm
Die Height:600 mm
SPM :35
Adjust:200 mm
Bolster:3000 x 1500 mm
Slide:2800 x 1500 mm


Machine Type:Leveler Feeder Unit
Make:Kyowa
Width:1350 mm
Thickness:0.4 - 3.2 mm
 
  118
IDMA33321
MakeAIDA,Japan
ModelNC1-2000(2)E
YOM2011
ConditionGood Condition
PhotoSee Photo
Capacity: 2000 ton
 
  119
IDMA33320
MakeShimomura
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton
Stroke : 250 mm
SPM : 25
Shut Height : 550 mm
Open Height : 900 mm
Adjust : 150 mm
Bolster : 1500 x 1200 mm
 
  120
IDMA33318
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton
Stroke : 300 mm
SPM : 20
Die Height : 630 mm
Adjust : 380 mm
Bolster : 2000x1220 mm
Slide : 1830x1000 mm
Main Motor : 18.5 Kw
 
  121
IDMA33316
MakeBaba
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton
Stroke : 230 mm
SPM : 25
Shut Height : 550 mm
Adjust : 100 mm
Bolster : 4000 x 1200 mm
Slide : 4000 x 1100 mm
Main Motor : 22 Kw
 
  122
IDMA33315
MakeOkamoto
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton
Stroke : 350 mm
SPM : 20
Die Height : 950 mm
Adjust : 130 mm
Bolster : 2000 x 1500 mm
Main Motor : 15 Kw
 
  123
IDMA33314
MakeKomatsu
ModelOBS200
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton
SPM : 28 - 55
Stroke : 250 mm
Adjust : 120 mm
Die Height : 450 mm
Bolster : 1450 x 840 mm
Slide : 850 x 650 mm
 
  124
IDMA33313
MakeAIDA,Japan
ModelDSF-N2-3000
YOM2017
ConditionGood Condition
PhotoSee Photo
Capacity: 3000 ton
 
  125
IDMA33301
MakeErfurt
ModelPKZZIV500FS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton
Centers of pressure 2
Idle stroke rate 20
Distance between the uprights, mm 2800
Shut height, mm 1100
Table dimensions, mm 2800 x 1800
Table gap, mm 2400 x 1250
Ram dimensions, mm 2800 x 1700
Ram stroke, mm 500
Ram adjustment, mm 500
Die cushion adjustment, mm 200
Die cushion stroke, mm 200
Die cushion capacity, ton 100
Main motor power, kW 75
Press weight, kg 120000
2 presses available
 
  126
IDMA33282
MakeNiagara
ModelSE2-400-144-60
YOM1977
ConditionGood Condition
PhotoSee Photo
Capacity : 400 Ton
Bed Area : 144” x 72
Stroke : 14
Shut Height : 40 SDAU
Adjustment : 14
SPM : 15-30
Windows : 50
 
  127
IDMA33243
MakeWMW Erfurt,Germany
Model
YOM1974. General overhauling in 2004 made by ZDAS
ConditionGood Condition
PhotoSee Photo
Force: 1250 T
Table 4000 x 2500 mm
Ram 3950 x 2500 mm
Ram stroke 630 mm
Ram adjustment 630 mm
Max tool height 1250 mm
Main motor 132 kW
Number of strokes 11/min
Equipped with:
Moving bolster lateral
Cushion
Quantity: 5 PKZVI1250 + 1 PKZV 1250
 
  128
IDMA33229
MakeVerson
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:600 ton
Bed Size: 108'' x 72''
Stroke: 20''
Shut Height: 51 1/4''
Bolster Height: 11''
 
  129
IDMA33227
MakeClearing
ModelF2-400-84x60
YOM
ConditionGood Condition
PhotoSee Photo
400 Ton Capacity
18" Stroke
48" Shut Height
12" Slide Adjustment
10 SPM

Equipped With:
Air Clutch & Brake
Air Cushions
T-Slotted Bolster & Ram
Link Solid State Controls
Tonnage
 
  130
IDMA33221
MakeDieffenbacher
Model
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity: 2400 ton,
Table size: 3500 x 2300 mm
Closing Speed: 1000 mm/s
 
  131
IDMA33220
MakeMuller
Model
YOM1982
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 ton,
Table size: 1650 x 1250 mm
 
  132
IDMA33173
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM
ConditionGood Condition
PhotoSee Photo
Capacity, ton 1250
Centers of pressure 2
Idle stroke rate 11
Distance between the uprights, mm 4000
Shut height, mm 1165
Table dimensions, mm 4000 x 1800
Table gap, mm 3750 x 1300
Ram dimensions, mm 3950 x 1800
Ram stroke, mm 630
Ram adjustment, mm 630
Die cushion capacity, ton 250
Greatest depth of extraction, mm 250
Main motor power, kW 132
Press weight, kg 215000
 
  133
IDMA33164
MakeErfurt
ModelPASU100
YOM
ConditionGood Condition
PhotoSee Photo
Pressure - 100tones.
Sheet's thickness - 2,8mm
Strokes per minute - 360
Table - 880x715mm
Weight - 10000kg
Quantity : 2 Pcs
 
  134
IDMA33162
MakeAIDA,Japan
ModelC2-11
YOM
ConditionGood Condition
PhotoSee Photo
C Frame Press
Capacity : 110 ton
Stroke : 180 mm
SPM : 35 - 65
Bolster : 1780 x 680 mm
Slide : 1300 x 520 mm
Die Height : 400 mm
Adjust : 90 mm
 
  135
IDMA33161
MakeWashio
ModelCX2-150
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 ton
Die Height : 450 mm
Stroke : 200 mm
SPM : 45
Adjust : 85
Bolster : 2000 x 650 mm
Ram : 1500 x 550 mm
Die Cushion : 17 tons
Cushion Stroke : 100 mm
 
  136
IDMA33155
MakeAIDA,Japan
ModelNC2-16
YOM
ConditionGood Condition
PhotoSee Photo
C Frame Press
Capacity : 160 ton
Stroke : 200 mm
SPM : 30 - 55
Bolster : 2040 x 760 mm
Slide : 1500 x 580 mm
Die Height : 450 mm
Adjust : 100 mm
 
  137
IDMA33111
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine type : Mechanical press
Make : Aida
Capacity : 500 ton
Bolster : 1200x1100mm
Slide : 1100x1100mm
Stroke : 300mm
SPM : 30
Adjust : 150mm
Die Height : 600mm
Main Motor : 37Kw
Machine type : Uncoiler
Make : Orii
Coil width : 600mm
Coil inner diameter : 508mm
Coil outer diameter : 1500mm
Speed : 16rpm
YOM : 1987
Machine type : Leveller Feeder
Make : Orii
Roll size : 620mm
Material Thickness : 0.6-6.0mm
Max feed length : 500mm
YOM : 1987
 
  138
IDMA33078
MakeISGEC
Model
YOM
ConditionGood Condition
PhotoSee Photo
Power 2000 ton
Link drive system
Table dimensions ( x-y/mm) 6100x2800
Slide dimensions ( x-y/mm) 6100x2800
Stroke( mm) 1000
Shut height (mm)1400
Adjustment of the stroke ( mm) : 300
Stroke per minute ( 8-16)
Motor Power : 315 kw
Five cushion
Power 320 ton
Adjustable stroke of the cushion ( mm) 30-250
Two lateral moving bloster
Hydraulic overload
Six robot Comau interpress
Two table for the loading of the sheet metal
 
  139
IDMA33044
MakeSato
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:200 ton
Stroke:250 mm
SPM: 25 - 45
Die Height: 450 mm
Adjust: 110 mm
Bolster: 2420 x 840 mm
Slide: 1850 x 650 mm
 
  140
IDMA33034
MakeTMP Voronezh Russia
ModelK3535A
YOM
ConditionGood Condition
PhotoSee Photo
Nominal press effort: 3150 kN
Slide stroke: 400 mm
Number of slide strokes per minute: 25
Distance adjustment between table and slide: 250 mm
Distance between table and slide in its lower position at upper position of adjustment: 750 mm
Table dimensions: 2500 x 1250 mm
Main motor power: 47 kW
Press dimensions:
-Length: 4555 mm
-Width: 2900 mm
-Height: 5855 mm
Press weight: 50900 kg
 
  141
IDMA32933
MakeErfurt
ModelPAUST210
YOM1974
ConditionGood Condition
PhotoSee Photo
Main slider's pressure between columns - 160tones
Each stamp-holder's pressure - 50tones
Drawing-out depth - 125mm
 
  142
IDMA32932
MakeErfurt
ModelPAUST320
YOM1981
ConditionGood Condition
PhotoSee Photo
Max pressure - 250tones
Pressure of each stamp-holder - 80tones
Drawing-out depth - 140mm
 
  143
IDMA32914
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 200 ton
SPM : 60 - 150
Stroke : 200 mm
Adjust : 100 mm
Bolster : 1500 x 1100 mm
Slide : 1500 x 900 mm
 
  144
IDMA32867
MakeFMI Mecfond
Model
YOM1993
ConditionGood Condition
PhotoSee Photo
Nominal Power……………………………….…………. 400 tonn
Stroke par minute……………………………………… 18
Height closed mould…………….…………………... 1300 mm.
Ram Stroke - fixed….…………………………………. 600 mm.
Dimension table….……………………………………. 2800 x 1600 mm.
Dimension ram………………..……………………….. 2800 x 1600 mm.
Frontal light columns……………………..…………. 2850 mm.
Lateral light colums ….………………………………. 1300 mm.
Stroke rod extraction..………………………………… 220 mm.
Number of lower cuschion……………………………. 2
 
  145
IDMA32866
MakeBenelli
Model
YOM1974
ConditionGood Condition
PhotoSee Photo
Power 400 tons
Strokes per minute 18
Shut height 1000 mm
Fixed slide stroke 320 mm
Press plan dimension 2500 x 1500 mm
Slide table dimension 2500 x 1500 mm
Front light uprights 2520 mm
Lateral light uprights 480 mm
Slide adjustment no
Extraction rod stroke 200 mm
Number of lower cushions 2
Max extraction of upper cams 170 mm
 
  146
IDMA32865
MakeFarina,Italy
Model
YOM1985
ConditionGood Condition
PhotoSee Photo
Power 400 tons
Strokes per minute 20
Closed die height 1002 mm
Feeder plan height 500 mm
Fixed slide stroke 400 mm
Press plan dimension 2030 x 1260 mm
Slide dimension 2130 x 1260 mm
Front light uprights 2040 mm
Lateral light uprights 480 mm
Slide adjustment no
Max distance plan‐ slide 1400 mm
Extraction rod stroke 200 mm
Max width belt 480 mm
Number of lower cushions 2
Max extraction of upper cams 220 mm
 
  147
IDMA32863
MakeMecfond
ModelS2-400-2800x1600
YOM1973
ConditionGood Condition
PhotoSee Photo
Nominal Power: 400 ton
Stroke: 600 mm
Distance between mold-holder and slide: 1300 mm
Adjustment: 300 mm
Slide dimensions: 2800 x 1600 mm
Strokes per minute (continuous): 20 mm
Strokes per minute (intermittent): 15 mm
Clutch air pressure: 4,2 Kg/cm2
Cushion features
Mod: 2-B-38”12
Number of cushions: 2
Number of openings in the base: 2
Stroke: 300 mm
Cushion diameter: 38”
 
  148
IDMA32862
MakeClearing Innocenti
Model
YOM
ConditionGood Condition
PhotoSee Photo
Power: 450 tons
Slide travel: 610 mm
Cushion Stroke: 305 mm
Cushion capacity: 84 tons Air 5Kg / cm2
Main engine: 6HP ‐ Turns 965
Strokes per minute: 12 ‐ 16
Tightening of column nuts: 1 turn ‐ 1/8 of a turn
 
  149
IDMA32861
MakeClearing Innocenti
ModelS2-400-108-60
YOM
ConditionGood Condition
PhotoSee Photo
Power: 400 tons
Cushions characteristics
Number of cushions: 2
Cushions dimensions: 1143 x 990 mm
Number of openings in the bench: 2
Cushions pressure: 70 tons (at 5kg / cm3 _air press.)
Cushions Stroke: 203 mm
Cylinder diameter: 914.4 mm
 
  150
IDMA32860
MakeClearing Innocenti
ModelS2-400-108-60
YOM
ConditionGood Condition
PhotoSee Photo
Power: 400 tons
Stroke: 610 mm
Minimum distance BTWN bench and slide: 1118 mm
Adjustment: 305 mm
Left‐right front‐back dimensions: 2743 x 1524 mm
Strokes per minute: 20
Characteristic of the extractor
Number of extractors: 2
Number of openings in the bench: 2
Extractor pressure: 65 T.m. (at 5 Kg / cm2)
Extractor stroke: 203 mm
Cylinder diameter: 914.4 mm
 
  151
IDMA32859
MakeClearing Innocenti
ModelF4450-132
YOM
ConditionGood Condition
PhotoSee Photo
Power: 450 tons
Slide travel: 610 mm
Cushion Stroke: 305 mm
Cushion capacity: 84 tons Air 5Kg / cm2
Main engine: 6HP ‐ Turns 965
Strokes per minute: 12 ‐ 16
Tightening of column nuts: 1 turn ‐ 1/8 of a turn
 
  152
IDMA32795
MakeErfurt
ModelPKZZIV315.1TS
YOM1988
ConditionGood Condition
PhotoSee Photo  |  See Video
with moving table
max. piston force 3150 kN
with distance before u.T. 12.5 mm
The force on the piston 1100 kN
with distance before u.T. 160 mm
number of strokes 25/min at idle
piston stroke 400 mm
Max stroke 160 mm
adjustable stroke 160 mm
Tensile strength up to 630 kN
backward force max 630 kN
side window - 1460x1460 mm
 
  153
IDMA32794
MakeErfurt
ModelPKZZI800
YOM1981
ConditionGood Condition
PhotoSee Photo
max ram force at a distance before the bottom dead center 12.5 mm 8000 kN
ram force at a distance before the bottom dead center 200 mm 2500 kN
Max . work at 10 strokes per min . : 30 kJ
Max . Work at 1-4 strokes per min . : 50 kJ
Ram stroke : 500 mm
Adjustability of slide 500 mm
Cushion in the table :
- 200 mm
- Adjustability 200 mm stroke
- Protipřidržovacν force 1600 kN
- Ejection force of 250 kN
Number of strokes: 1-10 / min
Number of strokes 14/min running on empty
Shutheight : 1050 mm
Table dimensions:
3150 x 1600 mm
Slide dimensions :
3100 x 1600 mm
The passage between columns : 3150 mm
The height from the floor to the top edge of table : 600 mm
Number of ejector rails in the ram : 5 pcs
The track bouncers : 50 mm
Total power bouncers : 245 Kn
Main motor output : 100 kW
Press height above floor : 8430 mm
Weight: 145000 kg
 
  154
IDMA32754
MakeManzoni
Model
YOM1996
ConditionGood Condition
PhotoSee Photo
Nominal Power …………………………………………… 630 ton
Stroke par minute ……………………………………… 15-35
Number of Station …………………………………….. 4
Passage between stations…………………………. 380 mm.
Height closed die …….………………………………... 850 mm.
Height table feeder……………………………………. 401 mm.
Ram stroke - fixed ……………………………………… 350 mm.
Dimension table…………………………………………. 1850 x 1250 mm.
Dimensione ram………………………………………… 1850 x 1250 mm.
Front light columns………………………………….... 1850 mm.
Lateral light colums …………………………………… 1200 mm.
Distance max table-ram ……………………………. 1200 mm.
Bars Opening Stroke………………………………….. 105 mm.
Internal Light closed bars………………………….. 300--600 mm.
Internal Light open bars …………………………… 820 mm.
Max width coil ………..……………………………….. 500 mm.
No. Lower cuschion………………………………….. 4
Max camme extraction sup.…………………….. 210 mm.
 
  155
IDMA32747
MakeAIDA,Japan
ModelPDA-20H
YOM1984
ConditionGood Condition
PhotoSee Photo
Press capacity: 200 ton,
Stroke length; 200 mm,
Stroke per minute: 48~120 S.P.M.
Slide area: 1500 x 900 mm,
Bolster area:1500 x 1100 mm,
Slide adjustment: 100 mm,
Die height: 450 mm,
Frame type: H
Material of frame: Steel,
Motor power: 30 kW,
Machine weight: 35 ton,
Dimensions( L x W x H): 1.8 x 3.5 x 5.2 m,
Stroke length: 200 mm,
Stroke per minute: 48~120 s.p.m
Die height: 450 mm,
Slide area: 1500 x 900 mm
 
  156
IDMA32744
MakeWMW Erfurt,Germany
ModelPKZZ250
YOM1972
ConditionGood Condition
PhotoSee Photo
Centres of pressure: 2
Maximum force of slide: 250 ton
Stroke of slide: 400 mm,
Adjust ability of slide: 120 mm,
Max. daylight between bolster and slide, SDAU: 580 mm,
Width between columns: 2500 mm
Slide area (W x D):2320 x 1250 mm,
Bed area (W x D): 2500 x 1400 mm,
Opening in bed (W x D): 2300 x 850 mm
Main motor power: 32 kw
Idle stroke rate, per min: 12
Counter pressure of cushion in bed: T 50
Stroke of cushion plate: 160 mm,
Height above ground: 5000 mm
 
  157
IDMA32714
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 ton
Stroke : 200mm
Shut Height : 400mm
SPM : 45
Bolster : 1220x760mm
Slide : 13 ton
Die Cushion : 13 ton
Cushion Stroke : 80mm
Cushion Pad : 540x340mm
Quantity : 2 nos
 
  158
IDMA32674
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) Machine type: C frame press, Double crank
Make: Aida
Capacity: 200 ton,
Stroke: 200 mm,
Die height: 525 mm,
SPM: 50
Bolster: 2400 x 800 mm,
Slide: 1830 x 650 mm,
Adjust: 105 mm,

2) Machine type: C frame press, Double crank
Make: Aida
Capacity: 150 ton,
Stroke: 200 mm,
Die height: 450 mm,
SPM: 45
Bolster: 1950 x 650 mm,
Slide: 1480 x 550 mm,
Adjust: 85 mm,

3)Machine type: C frame press, Double crank
Make: Aida
Capacity: 100 ton,
Stroke: 170 mm,
Die height: 350 mm,
SPM: 50
Bolster: 1060 x 560 mm,
Slide:600 x 450 mm,
Adjust:75 mm,
 
  159
IDMA32638
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 160 ton
Die Height: 450 mm
Stroke: 200 mm
SPM :45
Adjust: 100
Bolster: 2020 x 760 mm
Ram:1500 x 580 mm
With: Die Cushion
 
  160
IDMA32615
MakeVerson
ModelSE2-600-96-54
YOM1971
ConditionGood Condition
PhotoSee Photo
Capacity: 600 tons,
Bed area: 96" x 54 "
Ram area: 96" x 54"
Bolster: 8"
T-slotted bolster: 96" x 54"
4 knock outs in ram,
Windows: 20"
Stroke: 12 "
Adjustment: 6"
Speed variable : 25-50 spm,
Shut height SDAU: 41"
Cushion in bed of press: 30 tons,
Distance between IBS: 98 1/2"
Bed to gibs: 35"
Main motor: 125 HP
Height above floor: 276 1/2"
Overall height: 315 3/8"
Total weight of press: 167,000 LBS
Equipped with:
Air clutch
Air brake
Dipro 1500 wintress die protection unit
Load grad trade series 4
JIC electrical controls
Sesco model: 53-167 10,000 LB x 14" max width decoiler
Sesco stock straightener
Mechanical press roll feeder drive eccentric
 
  161
IDMA32605
MakeWMW Erfurt,Germany
ModelPKZVIII500.1FS
YOM1986
ConditionGood working condition
PhotoSee Photo
Capacity - 500 tones.
Working table - 3150 x 2100 mm
Distance between tables - 1200 mm
Dimensions - 7500 x 4700 x 4400 mm
Weight - 140000 kg
 
  162
IDMA32598
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 350 ton
Stroke: 450 mm
Die Height: 700 mm
SPM: 16
Adjust: 250 mm
Bolster:2130 x 1370 mm
Slide: 2130 x 1370 mm
With: Die Cushion
 
  163
IDMA32591
MakeWMW Erfurt,Germany
ModelPKZZI1250/4000
YOM1975
ConditionGood Condition
PhotoSee Photo
1250 tons , table dimensions 4000 x 1800 mm ,max. drawing depth 250 mm, table opening 3750 x 1300 mm, ram dimensions 3950 x 1800 mm , shut height 1165 mm , stroke 630 mm , adjustment 630 mm , 11 SPM , main motor power 132 kW , distance between columns 4000 mm , ejector capacity 40 tons, drawing depth adjustment 250 mm,weight 245 tons
 
  164
IDMA32569
MakeKomatsu
ModelE4T1500-05-90-MF-D
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity :1500 Metric Ton
Bed area :4800 x 2300 mm
Stroke length: 650 mm
Die Height: 1300 mm
Slide Adjustment: 200 mm
Equipped With:
Dual Rolling Bolsters, Maximizer
TPC Press Control New in 2017,
Hydraulic Die Clamping, 3 Axis
Transfer, (5) Station Pneumatic
Cushion, Blank Stacker
Strokes per minute: 5 & 8-22
 
  165
IDMA32567
MakeTMP Voronezh Russia
ModelKB3537
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
 
  166
IDMA32561
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity: 300 ton,
Stroke: 300 mm,
SPM: 25-40
Bolster: 2500 x 1300 mm,
Slide: 2450 x 1000 mm,
Die height: 725 mm,
Adjust: 100 mm,
Machine type: blnk feeder,
Feed stroke: 250 mm,
Clamp stroke: 80 mm,
SPM: 40
finger bar width: 360 mm,
Stages; 9
 
  167
IDMA32544
MakeFMI Mecfond
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:1500 ton,
Table:4650 X 2700 MM
E stroke: 500 MM
Stroke: 8-30 MIN.
Power: 400 KW
Weight:450 TM
 
  168
IDMA32461
MakeWMW Erfurt,Germany
ModelPE2-U-315-2500-1450
YOM1984
ConditionGood Condition
PhotoSee Photo
Capacity - 315 tons
Moving table - 2500 x 1450 mm
Ram stroke - 400 mm
Ram adjustment - 320 mm
Shut height - 900 mm
Ram strokes - 25 spm
Weight - 71300 лп
 
  169
IDMA32415
MakeAIDA,Japan
ModelDSF-S4-15000-610-245
YOM2015
Conditionnever installed,new in pack
PhotoSee Photo
CAPACITY - 1500 TONS (15,000 kN)
SUSPENSION POINTS - 4
RATING UP TO 30 SPM - 1/4" (6.2 mm)
STROKE LENGTH - 24" (610 mm)
SPEED (CONTINUOUS) 1 TO 30 SPM
CONTINUOUS WORKING ENERGY FULL REVOLUTION:
@ 30 spm 1,659"-TONS (375 kJ)
@ 10 spm 3,030"-TONS (685 kJ)
@ 40 spm 619"-TONS (146 kJ)
BOLSTER AND SLIDE L-R 240" (6,100 mm)
F-B 96.4" (2,450 mm)
MOVING BOLSTERS (FRONT TO BACK DIRECTION) 2
BOLSTER CAPACITY 132,000# (60,000 kN)
MOVING BOLSTER SPEED 40 ft/min (12 m /min)
MOVING BOLSTER HEIGHT 28.35" (720 mm)
SLIDE ADJUSTMENT 11.8" (300 mm)
SLIDE ADJUSTMENT SPEED 2" / min (50 mm/min)
DIE HEIGHT (SDAU BOLSTER) 48.03" (1,220 mm)
SLIDE DEFLECTION 1.0015"/ft (1/8000 mm/mm
BED DEFLECTION 0.0015"/ft (1/8000 mm/mm)
MAX UPPER DIE WEIGHT 66,120 Lbs (30,000 kgf)
UPRIGHT OPENING WIDTH 128" (3,250 mm)
APPROXIMATE OVERALL HEIGHT 365" (9,271 mm)
MOTOR SIZE (3) X 670 Hp (500 kW)
AIR SUPPLY 80 PSI (5.5 BAR)
VOLTAGE 480 V - 3 PH - 60 Hz
CIM-Tech hydraulic press (KOREA)
Force on main cylinder: 5000 t
Lifting force: 139 t
Distance between column: 6500 mm
Open height: 4800 mm
Under stamping plate: 6500 x 2420 mm
Cylinder stroke: 1500 mm
Automatic manipulator CIM MP25
Force: 25 t
Min/Max diameter: 1900/6000 mm
Main motor: 100 HP
Height: around 1900 mm
Rotation speed: 10-15 rpm
 
  170
IDMA32372
MakeWMW Erfurt,Germany
ModelPKZZIV500/2800
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Capacity, ton 500
Table size, mm 2800 x 1800
Ram size, mm 2800 x 1700
Ram stroke, mm 500
Ram adjustment, mm 500
Strokes per minute 20/25
Shut-height, mm 1100
Distance between columns, mm 2800
Stroke of cushion plate, mm 200
Counter pressure of cushion in bed, ton 100
Motor capacity, kW 75
Equipped with side moving bolsters.
Quantity: 2 nos
 
  171
IDMA32370
MakeWMW Erfurt,Germany
ModelPKZZIV500.1TS
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Capacity, ton 500
Table size, mm 2800 x 1500
Ram size, mm 2800 x 1500
Ram stroke, mm 500
Ram adjustment, mm 500
Strokes per minute 20
Shut-height, mm 1100
Distance between columns, mm 2800
Stroke of ram ejector, mm 200
Stroke of cushion plate, mm 200
Counter pressure of cushion in bed, ton 100
Motor capacity, kW 75
Press weight, kg 136000
Equipped with moving bolsters.
Quantity: 2 nos
 
  172
IDMA32364
MakeClearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
capa: 2000 TON(2 Point)
Die Hight : 900mm
Slaider Ajust : 200mm
Stroke : 487mm
SPM : 4~6
BOLSTER : 7000x1750mm
 
  173
IDMA32325
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton
Stroke : 300 mm
SPM : 25-40
Bolster : 2500 x 1300 mm
Slide : 2450 x 1000 mm
Die Height : 725 mm
Adjust : 100 mm
Machine Type : Blank Feeder
Feed Stroke : 250 mm
Clamp Stroke : 80 mm
SPM : 40
Finger Bar Width : 360 mm
Stages : 9
 
  174
IDMA32321
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton
Stroke : 400 mm
SPM : 12
Die Height : 900 mm
Adjust : 400 mm
Bolster : 3000 x 1500 mm
Slide : 3000 x 1500 mm
Die Cushion : 80 ton
Cushion stroke : 250 mm
Main Motor : 55 Kw
 
  175
IDMA32310
Make
ModelKB5535
YOM
ConditionGood Condition
PhotoSee Photo
Drawing slide capacity, tf 315
Rated distance of slide above bottom, mm 16
Drawing slide stroke, mm 630
Drawing slide shut height, mm 720
Drawing slide dimensions, mm
left to right 800
front to back 800
Blankholder nomanal capacity, tf 200
Rated distance of blankholder above bottom, mm 6
Blankholder stroke, mm 400
Blankholder shut height, mm 620
Blankholder dimensions, mm
left to right 1250
front to back 1250
Continous run frequency, min-1 10...16
Slides single strokes max. frequency, min-1 7,5...12
Shut height adjustment,mm 200
Bolster plate dimensions, mm
left to right 1250
front to back 1250
Main drive electric motor power, kW 71
Overall dimensions, mm
left to right 6760
front to back 5830
height above floor level 6500
 
  176
IDMA32266
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
1) Make: Aida
Capacity: 500 ton
Stroke: 605 mm
Die Height: 1000 mm
SPM: 25
Adjust: 500 mm
Bolster: 2750 x 1700 mm
Slide: 2750 x 1700 mm
Die Cushion: 150 ton
Cushion Stroke: 250 mm,

2) Make: Fukui
Capacity : 400 ton
Stroke: 400 mm
Die Height: 700 mm
SPM: 25
Adjust: 300 mm
Bolster : 2130 x 1370 mm
Slide :2130 x 1370 mm
Die Cushion: 80 ton
Cushion Stroke : 230 mm
 
  177
IDMI7076
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton
 
  178
IDMA32219
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
C frame
Capacity: 200 ton,
Stroke: 250 mm,
Die height: 500 mm,
SPM: 33
Adjust: 105 mm,
Bolster: 2400 x 800 mm,
Slide: 1830 x 650 mm
 
  179
IDMA32203
MakeSmeral,Czech
ModelLKT250A
YOM1987
ConditionGood Condition
PhotoSee Photo
Capacity: 250 ton,
Working stroke: 12,5 mm,
Number of strokes of slide: 25 min -1,
Passage: 1600 mm,
Shut height: 760 mm,
Stroke of slide: 250 mm,
Clamping surface of slide: 1560 x 900 mm,
Clamping surface of table: 1600 x 1200 mm,
Capacity if main electromotor: 30 kW,
Dimensions L x w x h: 2980 x 1500 x 4800 mm,
Weight: 27000 kg
 
  180
IDMA32198
MakeSpiertz
ModelF4E-125-43
YOM1978 and 1982
ConditionGood Condition
PhotoSee Photo
Pressure Capacity :1250 t
Ram stroke :762 mm
Ram adjustment :610 mm
Table surface area: 4300 mm x 2320 mm
Slide surface area :4300 mm x 2320 mm
Shut height (S.D.A.U.): 1.260 mm
Number of strokes: 8 to 18 spm
Distance between the columns: F-B 4320 mm
Distance between columns: L-R 2400 mm
Moving bolster height over floor: 450 mm
Height above floor: 530 mm
Cushion pnumatic capacity: 260 ton
Cushion stroke: 250 mm
Number of cushion cylinders: 3
Number of Plunger guide: 4
Moving bolster left to right
Hydraulic overload system YES
Weight approx.: 320 t
Year of Retrofitting – retrofitted in 1997 and a transfer and handling robot have been installed, further the press was electrical retrofitted in 2009 with a new SIEMENS S7
 
  181
IDMA32196
MakeVerson
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 250 ton,
Bolster area: 62" x 36"
Slide area: 52" x 34"
Stroke: 10"
Slide adjustment: 5"
Shut height: 32" SDAU right
Speed: 25-50 SPM (variable speed)
 
  182
IDMA32170
MakeArisa
Model
YOM1979
ConditionGood Condition
PhotoSee Photo
CAPACITY: 1250 TM
TABLE: 1050 X 1220 MM
CLOSING HEIGHT: 800 MM
STROKE: 400 MM
SLIDE ADJUSTMENT: 150 MM
TABLE THICKNESS: 240 MM
30 GOLPES / MIN,
 
  183
IDMA32168
MakeArisa
Model
YOM
ConditionGood Condition
PhotoSee Photo
CAPACITY:630 TON
TABLE: 780 X 780 MM
CLOSING HEIGHT: 800 MM
STROKE: 400 MM
SLIDE ADJUSTMENT: 170 MM
PASS BETWEEN MONTANTS: 1120 MM
TABLE THICKNESS: 250 MM
POWER: 55 KW
NΊ OF BLOWS PER MINUTE 20
 
  184
IDMA32167
MakeArisa
Model
YOM1981
ConditionGood Condition
PhotoSee Photo
CAPACITY : 400 TON
TABLE: 750 X 800 MM
CLOSING HEIGHT: 475 MM
STROKE: 300 MM
SLIDE ADJUSTMENT: 150 MM
TABLE THICKNESS: 200 MM
20 BLOWS / MIN.
 
  185
IDMA32166
MakeArisa
Model
YOM1978
ConditionGood Condition
PhotoSee Photo
CAPACITY :800 TM
TABLE : 1050 X 1220 MM
HEIGHT CLOSING / CLOSING HEIGHT:800 MM
STROKE: 400 MM
CAR ADJUSTMENT / SLIDE ADJUSTMENT: 150 MM
TABLE THICKNESS / TABLE THICKNESS: 225 MM
30 BLOWS / MIN.
 
  186
IDMA32155
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type : Mechanical Press
Stroke : 500 mm
Die Height : 900 mm
SPM : 15-30
Adjust 200 mm
Bolster : 4000 x 1400 mm
Slide : 4000 x 1400 mm
Machine Type : Uncoiler Leveler Feeder
Make : Orii
Coil Weight : 5000 kgs
Strip Thickness : 6.0 mm
Strip Width : 800 mm
 
  187
IDMA32149
MakeAIDA,Japan
ModelNC1-2000(2)E
YOM2010
ConditionGood Condition
PhotoSee Photo
Capaciy: 200 ton,
Stroke length: 250 mm,
Stroke per minute: 25~45 s.p.m.
Die height: 450 mm,
Slide adjustment: 110 mm,
Slide area: 880 x 650 mm,
Bolster area: 1390 x 840 mm
 
  188
IDMA32148
MakeFukui
ModelMDE-400
YOM1982
ConditionGood Condition
PhotoSee Photo
Limit of capacity 4,5 mm
Slide stroke 200 mm
Speed: 15-50 spm
Slide adjustment 150 mm
Die height 450 mm
Slide area 1500 x 1500 mm
Bolster area 1500 x 1500
Complete line: uncoiler, leveler, feeder, coiler
 
  189
IDMA32138
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
C Frame
Capacity : 2500 kN
Course of slider : 500 mm
Distance between table and slider : 800 mm
Table size : 1000 x 630 mm
Main motor power : 18.5 kW
Dimension : 1250 x 170 x 3150 mm
Press weight : 10940 kg
 
  190
IDMA32137
MakeSCMB
ModelPHS350
YOM2001
ConditionGood Condition
PhotoSee Photo
C Frame Press
Stroke : 1000 mm
Daylight : 1200 mm
Ram Size : 1600mm x 735mm
Table Size : 2200 x 1200 mm
Main motor 30 kW
Speed in fast approach : 40mm/sec
Maximum working speed : 0.5-19.5mm/sec
Return speed : 50mm/sec
Return force : 51 ton
Noise level : Inf75 Dba
Shut off time : 45 mill.sec
Oil Qty : 406 liter
Approx size : 4175mm x 2000mm x 5200mm
 
  191
IDMA32136
MakeEmanuel
Model
YOM
ConditionGood Condition
PhotoSee Photo
Hydraulic C Frame
Hydraulic press at the neck of the swan Emanuel 300 ton
Piano mm 1000x1000
Mazza mm 700x700
Corsa mm 550 circa
It lights up to the PMS mm 900 circa
Motore Kw 55
Extractor inferior and hydraulic superiore
Dimensions
Height mm 4200
Width 1300 mm
Depth mm 2500
Weight tone 30
C Frame Hydraulic Emanuel 300 ton Press
Lower Table mm 1000x1000
Upper Table mm 700x700
Piston stroke mm 550 approx.
Vertical Light mm 900 approx.
Motor Power 55 Kw
Lower and upper hydraulic extractor
Total Height mm 4200
Total Widht mm 1300
Total Depht mm 2500
Weight ton 30
 
  192
IDMA32123
MakeLitostroj,Slovenia
ModelHVC-2-250
YOM1991
ConditionGood Condition
PhotoSee Photo
Capacity of slider: 250-2500 kN
Course of slider: 800 mm
Capacity of pillow: 100-1000 kN
Course of pilow: 320 mm
Table size: 1250 x 1000 mm
Pilow size: 800x800 mm
Down speed of slider: 250 mm/s
Up speed of slideR: 250 mm/s
Slider speed: 8-50 mm/s
Speed of pillow: 50 mm/s
Refueling volume of working liquid: 1000 l
Main motor power: 60 kW
Dimension: 1600 x 3200 x 4800 mm
Press weight: 25 tons
 
  193
IDMA32122
MakeWMW Erfurt,Germany
ModelPEEII250
YOM1984
ConditionGood Condition
PhotoSee Photo
250 ton, Length of worktable area: 1200 mm, Width of working table area: 800 mm,slide stroke:40-160 mm, no. of slide strokes:50 min, table dimensions: 1250 x 800 mm, slide dimensions: 670 x 900 mm, slide adjustment: 110 mm, shut height: 500 mm, main motor output: 22 kw, dimensions l x w x h: 1445 x 2680 x 3275 mm, machine weight:17,500 kg
 
  194
IDMA32121
MakeUSSR
ModelP6334
YOM1993
ConditionGood Condition
PhotoSee Photo
C frame
Capacity: 250 ton
 
  195
IDMA32120
MakeSeoul
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity -200 ton
Stroke9.84 " (250 mm)
Die Height19.69 " (500 mm)
S.P.M (R.P.M)25-30 spm
Bolster Area57.09 " X 31.5 " X 7.48 " (1450 mm X 800 mm X 190 mm)
Slide Area43.31 " X 29.92 (1100 mm X 760 mm)
Slide Adjustment4.33 " (110 mm)
Main Motor15 kw
 
  196
IDMA32119
MakeArisa
ModelG2-250-S
YOM1977
ConditionGood Condition
PhotoSee Photo

PRESS DESIGN
drive system eccentric / crank
frame design C-frame, double sided
number of suspensions 2
number of slide actions 1
table cushion yes
PRESS FORCES
total force (nominal) ( 2500 kN ) 250 to
nominal work capacity ( 24130 BTU) 25400 kNm
PRESS TABLE
table surface (left-right) (95.348 " ) 2420 mm
table surface (front-back) (42.946 " ) 1090 mm
thickness of bolster plate ( 5.91 " ) 150 mm
SLIDE
slide force ( 2500 kN ) 250 to
table surface (left-right) ( 82.74 " ) 2100 mm
table surface (front-back) ( 35.46 " ) 900 mm
stroke ( 7.88 " ) 200 mm
stroke rate (max.) 25 /min
SLIDE (MECHAN. PRESS)
slide adjustment ( 6.895 " ) 175 mm
autom. Slide adjustment yes
stroke adjustment no
main drive power (32.184 hp ) 24 kW
DIE CUSHION (TABLE CUSHION)
number of cushions 1
cushion force ( 160 kN ) 16 to
stroke ( 3.94 " ) 100 mm
working principle pneumatical
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC (16.745 " ) 425 mm
throat (C-frame) (20.882 " ) 530 mm
distance between columns (H-frame) ( 59.1 " ) 1500 mm
ELECTRICAL SPECIFICATIONS
mains voltage 380 V
mains frequency 50 Hz
DIMENSIONS / WEIGHTS
space requirements -left/right- (100.67 " ) 2555 mm
space requirements -front/back- (104.41 " ) 2650 mm
total height (169.42 " ) 4300 mm
total weight approx. ( 66150 lb ) 30000 kg
ATTACHMENTS (PRESSES)
safety guard / safety door yes
vibration damping elements 4
 
  197
IDMA32076
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton
Stroke : 600 mm
SPM : 14
Die Height : 600 mm
Bolster : 2130 x 1870 mm
Slide : 1900 x 1200 mm
Adjust : 200 mm
Die Cushion : 50 ton
Cushion stoke : 300 mm
Pad : 810 x 880 x 2
 
  198
IDMA32038
MakeAIDA,Japan
ModelTMX500
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton
Stroke: 450 mm
Die Height: 800 mm
SPM: 25
Bolster: 3580 x 1250 mm
Slide: 3580 x 1250 mm
Die Cushion: 100 tons
Cushion Stroke: 160 mm
 
  199
IDMA32031
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton
Stroke:500 mm
Die Height: 900 mm
SPM: 15 - 30
Adjust: 200 mm
Bolster: 4000 x 1400 mm
Slide: 4000 x 1400 mm
 
  200
IDMA31891
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type Eccentric Drive Press
Stroke 400 mm
Die Height 860 mm
SPM 15 - 25
Adjust 400 mm
Moving Bolster 2000 x 1000 mm
Slide 2000 x 1000 mm
Side Opening 1100 mm
Die Cushion Capacity 48 ton
Die Cushion Type 1Pad, 2 Cylinders
Pad Size 1500 x 580 mm
Die Cushion Stroke 150 - 280 mm
Die Cushion Stroke 280 mm
Motor 45 Kw
 
  201
IDMA31863
MakeWeingarten
ModelVK2000.43.85
YOM
ConditionGood Condition
PhotoSee Photo
Capacity – 2000 Metric Tons / 2200 Tons (USA)
Stroke – 33”
SPM – 8 to 15 (Variable)
Bed size – 160” x 86” (Can be increased to 170” L-R)
Shut height – 59” (Over bolster)
Adjustment – 14”
Windows
Cushions (bed and ram)
Very good condition
Overhauled in 2005
Upgraded Siemens controls
Includes Disassembly and electrical and mechanical match-marking
 
  202
IDMI7050
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:250 ton
Bed Size : 2000 mm x 1220 mm
Slide Area : 1850 mm X 1000 mm
Stroke Length : 300 mm
Shut Height : 850 mm
Strokes per minute : 28
Ram Screw Adjustment : 150 MM
Die Cushion : Twin Die Cushion
 
  203
IDMI7049
MakeColishaw Walkar UK
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity ........ 800 Tons
Bed................ 3350 x 2100
Stroke............. 600 MM
Shut............... 1050 MM
Adjustment.....500 MM Motorized
SPM................ 18
Cushion......... YES TWIN DIE CUSHION
Main Motor ..150 HP
Machine Weight 180 Tons
Tie Rod Frame ,8 Point Gibs
 
  204
IDMI7048
MakeOKK,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
H frame press
Cap.: 600 Tons
Stroke Length: 500 mm
Bolster Area: 3000 x 1620 mm
Slide Area: 2820 x 1600 mm
Die Height: 800 mm
SPM: 15 Under Loading Condition
Slide Adjustment: 350 mm
Type: 4 Suspension Press
Moving Bolster System
Die Cushion: Mounted 1 Pad 2 Cylinder Type 150 T 250 mm
Stroke Pad Area 2450 x 1250 mm Capacity
POWER 55 KW + 5 KW
 
  205
IDMI7047
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
H Frame Press
Link Motion
Capacity: 600 ton
Stroke Length: 605 mm
Bolster Area: 3050 x 1700 mm
Slide Area: 3050 x 1700 mm
Die Height: 1200 mm
SPM: 15 Under Loading Condition
Slide Adjustment: 600 mm
Type: 2 Suspension Link Drive Press
Moving Bolster System: Mounted (Move To Right Side)
Die Cushion: Mounted 1 Pad 2 Cylinder Type 150 T 250 mm
Stroke Pad Area 2450 x 1250 mm Capacity
 
  206
IDMI7046
MakeVerson Wilkins
Model
YOM
ConditionGood Condition
PhotoSee Photo
H Frame Press
Cap.: 500 Tons
Stroke Length: 400 mm
Bolster Area: 3100 x 1600 mm
Slide Area: 3100 x 1600 mm
Die Height: 1000 mm
SPM: 20 Under Loading Condition
Slide Adjustment: 300 mm
Type: 2 Suspension
Die Cushion: Mounted 1 Pad 2 Cylinder Type 150 Tons 140 mm
 
  207
IDMI7045
MakeShimomaru Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:500 ton
Bolster :2500 x 1500 mm
Slide :2500 x 1500 mm
Stroke: 450 mm
SPM: 15
Adjust :350 mm
Die Height: 1100 mm
Main Motor: 30 Kw
Die Cushion: 50 x 2 tons
Cushion Stroke :230 mm
Cushion Pad :1100 x 920 x 2
 
  208
IDMA31822
MakeWMW Erfurt,Germany
ModelPKZZIII315.1FS
YOM
ConditionGood Condition
PhotoSee Photo
Max. capacity: 315 tons
Table size: 2500x1400 mm
Double column crank
 
  209
IDMI7043
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
MOVING BOLSTER
CRANKLESS PLUNGER GUIDED
Capacity 400 ton
Stroke 300 mm
SPM 20 - 60
Die Height 700 mm
Adjust 200 mm
Moving Bolster 2300 x 1500 mm x 2
Slide 2300 x 1500 mm
Die Cushion 60 ton
Cushion Stroke 150 mm
Pad 1800 x 1000 mm
 
  210
IDMA31818
MakeWasino,Japan
Model
YOM2001
ConditionGood Condition
PhotoSee Photo
Net weight : 42.000kg
300 Ton
Technical Details Attached In Photo
 
  211
IDMA31787
MakeWMW Erfurt,Germany
ModelPD2HH400-250TS
YOM1987
ConditionGood Condition
PhotoSee Photo
Total capacity: 650 ton,
Inner ram capacity: 400 ton,
Inner ram stroke: 800 mm,
Outer ram capacity: 250 ton,
Outer ram stroke: 630 mm,
Idle stroke rate 12,5...25
Min. shut-height of inner ram: 1200 mm,
Max. shut-height of inner ram: 1600 mm,
Min. shut-height of outer ram: 1100 mm,
Max. shut-height of outer ram: 1500 mm,
Bed dimensions: 3200 x 2000 mm,
Inner ram dimensions: 2640 x 1460 mm,
Outer ram dimensions: 3200 x 2000 mm,
Die cushion stroke: 250 mm,
Die cushion holding capacity: 80 ton
Die cushion ejection capacity: 80 ton
Main motor power:186 kW
 
  212
IDMA31775
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 125 ton,
Stroke: 75 mm,
Die height: 350 mm,
Adjust: 50 mm,
SPM: 80-200
Bolster: 1100 x 800 mm,
Slide: 970 x 700 mm,
Mail motor: 18.5 kw
Transfer feed stroke: 200 mm,
Clamp stroke: 100 mm
 
  213
IDMA31764
MakeSpiertz
Model
YOMFully reconditioned in 2001
ConditionExcellent condition,under power
PhotoSee Photo
Capacity:1250 ton
Stroke:762 mm
Stroke/min.:18
Slide regulation:610 mm
Hydraulic overload:YES
Distance between the columns: 4.320 mm
Lateral Moving Table: 4.200 mm x 2.320 mm
Lateral windows: 2.400 mm
PLC : Siemens
Cushion: YES
Weight : 300 Ton ( approx. )
The press is complete of Automatic Transfer line with 2 robots
 
  214
IDMA31739
MakeHikari
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Stroke: 200 mm,
Die height: 500 mm,
SPM: 60,
Bolster space: 2000 x 1000 mm,
Slide adjust: 100 mm,
Main motor: 45 Kw
his H beam processing line is now available, consisting of a 400 ton H frame press, conveyors, feeders and dies.
The line is set up to automatically process the beams, and therefore the press does not have a bolster.
However, if the dies are removed, then a 2000 x 1000 mm bolster could be added.
 
  215
IDMA31738
MakeAmada,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
C frame press,
Capacity: 150 ton,
Stroke: 175 mm,
Die height: 340 mm,
SPM: 30-55
Adjust: 100 mm,
Bolster: 1250 x 750 mm,
Slide: 700 x 550 mm
 
  216
IDMA31737
MakeShimomura
Model
YOM1985
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity: 500 ton
Die Height: 1100 mm
Stroke: 450 mm
SPM : 15
Adjust: 300 mm
Bolster: 2500 x 1500 mm
Die Cushion: 50 ton x 2
Cushion Stroke: 225 mm
Cushion Pad: 1100 x 920 mm x 2
 
  217
IDMA31728
MakeMori Tekko
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Bolster: 2500 x 1500 mm,
Slide: 2500 x 1500 mm,
Stroke: 550 mm,
SPM: 15
Adjust: 150 mm,
Die height: 900 mm,
Die cushion: 80 ton
 
  218
IDMA31714
MakeErfurt
ModelPKZZI1250-4000
YOM
ConditionGood Condition
PhotoSee Photo
Nominal capacity 1250t
Slide stroke 630mm
Number of strokes 11
Die height 1165mm
Bolster 4000x1800mm
 
  219
IDMA31710
MakeUSI Clearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1500 ton
Bed Size – 144” x 96”
Stroke – 32”
SPM – 9 (Can be increased and made variable)
Shut height – 48” (SDAU, Over bolster)
Adjustment – 12”
Cushion (250 Tons, 16” Stroke)
Windows – 60” wide
Rolling bolster (front-to-back)
150 HP Main Motor
(2) Presses Available
 
  220
IDMA31709
MakeErfurt
ModelPKZZI1250/4000
YOM1975
ConditionGood Condition
PhotoSee Photo
Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 tons
Slider force at the distance of 250 mm in the lower dead point: 350 tons
Number of single strokes per minute: 11
Slider stroke: 630 mm
Slider adjustment: 630 mm
The closed height: 1165 mm
Table pillow:
-Max. stroke: 250 mm
-Stroke adjustment: 250 mm
-Max. holding force: 250 tons
-Max. ejection force: 40 tons
Table dimensions: 4000x1800 mm
Bolster dimensions: 3950x1800 mm
Table gap: 3750x1300 mm
Main motor power: 132 kW
Stay spacing: 4000 mm
Press weight: 215000 kg
I don't have a packing list for this press.
There is only the weight of large parts of the press.
Weight of a table in assembly with an exhaust pillow and a plate of a pusher: 42600 kg
Weight of a table (without built in details): 27400 kg
Weight of an exhaust pillow: 3000 kg
Weight of a plate of a pusher: 5400 kg
Weight of a lateral rack in assembling: 8000 kg
Weight of a cross-arm in assembling: 44000 kg
Weight of a cross-arm without built in details: 24800 kg
Weight of the top part of a cross-arm: 7800 kg
Weight of a shaft of a flywheel with a pine forest with a muff and brakes: 16900 kg
Weight of a slider in assembling: 33600 kg
Weight of coupling bolts: 3400 kg
 
  221
IDMA31700
MakeAIDA,Japan
ModelPDA400
YOM1979-1983
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Bolster:2150 x 1000 mm,
Slider: 2150 x 1000 mm,
Stroke: 75 mm,
Number stroke: 40-150 per minute
 
  222
IDMA31695
MakeBlow
ModelSC2-300-72-42
YOM1994
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Area of bed: 1050 x 1800 mm,
Area of ram: 1050 x 1800 mm, T slotted
Stroke: 300 mm,
Shut height: 800 mm,
Ram adjustment (power): 250 mm,
Speeds: 30/60 SPM,
Windows: 800 x 1000 mm,
Bloster: 175 mm,
Floor to top of bed: 975 mm,
Floor standing: Yes,
Tie rod construction: Yes,
Air clutch: yes,
Air brake: yes,
Palm buttons and press conrols: yes,
Main motor : 50 horsepower
 
  223
IDMA31670
MakeSchuler German
ModelP2E2Sq250/2,3/04
YOM1971
ConditionGood condition,under power
PhotoSee Photo
Capacity: 250 ton,
Ram stroke: 460 mm,
Ram adjustment: 300 mm,
Distance between columns L-R: 2360 mm,
Table surface area: 2.300 x 1.300 mm,
Slide surface area: 2300 x 1300 mm,
Shut height (S.D.A.U.): 800 mm,
Number of strokes: 16-24 spm,
Bolster height over floor: 650 mm,
Cushion capacity at press 82,83 and 87: 42 ton,
Cushion capacity at press 85 and 86: 46 ton,
Cushion stroke: 210 mm,
Number of cushion cylinders: 2
Weight approx: 104 ton
Quantity:5 nos
 
  224
IDMA31651
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Stroke: 400 mm,
Die height: 860 mm,
SPM: 15-5
Adjust: 400 mm,
Moving bolster: 2000 x 1000 mm,
Slide: 2000 x 1000 mm,
Side opening: 1100 mm,
Die cushion capacity: 48 ton,
Die cushion type: 1 pad, 2 cylinders,
Pad size: 1500 x 580 mm,
Die cushion stroke: 150-280 mm,
Die cushion stroke: 280 mm,
Motor: 45 Kw,
Quantity: 3 nos,
Including robot,
Each press has 2 moving bolsters, horizontal movement and die cushions.
 
  225
IDMI7015
MakeVerson
ModelSEI-600-48-48T
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 600 Ton
Ram Stroke : 24"
Shut Height : 58"
No. of Stroke per Min. : 15"
Bolster plate to ram adjustment : 6"
Bed Dimension : LR 48"x FB 48"
Ram Dimension : LR 48" x FB 48"
Bottom Ejector Stroke : 4.5"
Upper Ejector Stroke : 3"
Bolster Plate Thickness : 25"
Main Drive Motor Power (HP) : 100
Main Drive Motor RPM : 1100
 
  226
IDMA31632
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
H frame press
Capacity: 200 ton,
Bolster: 2000 x 1220 mm,
Slide: 1830 x 1000 mm,
Stroke: 300 mm,
SPM: 15-25
Die height: 800 mm,
Adjust: 430 mm,
main motor: 22 Kw,
Die cushion: 16.7 x 2
cushion stroke: 150 mm,
Cushion adjust: 150 mm,
Cushion pad: 700 x 700 mm
 
  227
IDMA31627
MakeWasino,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
C frame press
Capacity: 100 ton,
Stroke: 170 mm,
Die height: 400 mm,
SPM: 20-50
Adjust: 75 mm,
Bolster: 1700 x 600 mm,
Slide: 1300 x 500 mm
 
  228
IDMA31619
MakeWMW Erfurt,Germany
ModelPKZ400/1000
YOM1975-1982
ConditionGood Condition
PhotoSee Photo
capacity: 400 tons,
Stroke: 400 mm,
Table size (left to right): 1000 mm,
Table size (front to back): 1320 mm,
Ram (left to right): 800 mm,
Ram ( front to back): 1060 mm,
Ram adjustment: 200 mm,
Strokes : 18 min^-1
Shut height: 685 mm,
Driving power: 32 kW,
Driving power overall: 38 kW,
Required space: 2550 x 2700 mm,
height of machine above floor: 6300 mm,
Upper ejector number / power: 20 t/125 mm,
Total weight: 33800 kg,
Quantity: 6 nos
 
  229
IDMA31616
MakeWMW Erfurt,Germany
ModelPKZ-800/1000
YOM1966-1967
Conditionworking condition ,under power
PhotoSee Photo
Capacity: 800 ton,
Stroke of slider: 500 mm,
Number of strokes per minute: 12
Adjustment of slider: 185 mm,
Table area: 1250 x 1650 mm,
Slider dimensions: 1000 x 1250 mm,
Main motor power: 55 kW,
Distance between columns: 1250 mm,
Press dimensions: 3800 x 2800 x 6900 mm,
Weight: 57 tons
Quantity: 2
 
  230
IDMA31595
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton
Stroke: 250 mm
SPM: 20 - 60
Die Height: 850 mm
Adjust :300 mm
Bolster : 3000 x 2200 mm
Machine Type: Uncoiler Leveler Feeder
Make : Fukui
Material Thickness: 0.5 - 1.6 mm
Material width: 500 - 1830 mm
Feed Stroke: 2500 mm
Feed SPM: 60
Feed Speed : 120 M/min (Max)
Motor: 22 Kw
 
  231
IDMA31591
MakeAmada
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type: C Frame Press
Capacity: 200 ton
Stroke: 203.2 mm
SPM: 20 - 40
Die Height: 675.8 mm
Adjust :100 mm
Bolster:2320 x 740 mm
Slide:1800 x 650 mm
Die Cushion:Front 3.2 Rear 2.8 ton
Cushion Pad :100 x 350 mm x 2
 
  232
IDMA31589
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type Transfer Press
Make Aida
Capacity 300 ton
Stroke 350 mm
Die Height 700 mm
SPM 20 - 40
Maximum Drawing Depth 120 mm
Adjust 100 mm
Bolster 2500 x 1000 mm
Slide 2500 x 1000 mm
Die Cushion Capacity
Stage 1 & 2 10 tons
Stage 3, 4, 5, 6 & 7 5 tons
Die Cushion Stroke 120 mm
Transfer Unit
Feed Stroke 350 mm
Clamp Stroke 120 mm
Lift Stroke 60 mm
Finger Bar Width 20 - 40
Spm 500 - 600 mm
Stages 7
 
  233
IDMA31585
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 250 ton
Stroke: 200 mm
Die Height: 600 mm
SPM: 35
Adjust : 200 mm
Bolster: 2250 x 1300 mm
Slide: 2250 x 1200 mm
 
  234
IDMA31507
MakeWMW,Fritz Heckert
ModelPKZ 400/1000
YOM1979
ConditionGood Condition
PhotoSee Photo
Pressure - 400tones
Slider's travel - 315mm
Slider's shift - 200mm
Weight - 38500kg
 
  235
IDMA31476
MakeErfurt
ModelPKZZI2000
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity: 1250 ton,
Centers of pressure: 2
idle stroke rate: 11
Distance between the uprights: 4000 mm,
Shut height: 1165 mm,
Table dimensions: 4000 x 1800 mm,
Table gap: 37050 x 1300 mm,
Ram dimensions: 3950 x 1800 mm,
Ram stroke: 630 mm,
Ram adjustment: 630 mm,
Die cushion capacity: 250 ton,
Greatest depth of extraction: 250 mm,
Main motor power: 132 kW,
Press weight: 215000 kg.
 
  236
IDMA31422
MakeBaba
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type Mechanical High Speed Press
Make Baba
Capacity 200 ton
SPM 32
Stroke 200 mm
Die Height 350 mm
Adjust 80 mm
Bolster 1300 x 800 mm
Mail Motor 15 Kw 4p
 
  237
IDMA31421
MakeBaba
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type Mechanical Press
Make Baba
Capacity 250 ton
SPM 32
Stroke 200 mm
Die Height 430 mm
Adjust 100 mm
Bolster 1000 x 1000 mm
Slide 520 x 570 mm
Main Motor 22 Kw 4p
 
  238
IDMA31415
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity 200 ton
Stroke 150 mm
Die Height 550 mm
Adjust 100 mm
SPM 40 - 100
Bolster 1500 x 1100 mm
Slide 1500 x 900 mm
Mail Motor 30 kw
 
  239
IDMA31405
MakeVerson
Model
YOMone unit approx. 1978 & one unit approx. 1971
ConditionGood Condition
PhotoSee Photo
1.
VERSON 600 TON STRAIGHT SIDE SINGLE CRANK PRESS
FROM PLANT LIQUIDATION TO ONGOING OPERATION
MODEL SE1-600-48-48
SERIAL NUMBER 25425
STK#103647
APPROX. DATE OF MEG. 1978
================================
SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE AND TO VERIFICATION TO BUYER;
CAPACITY 600TON
BED AREA 48'' x 48''
RAM AREA 48''x 48''
STOKE 24''
SHUT HEIGHT 58''
ADJUSTMENT 6''
SPEED 15-25 SPM
BOLSTER APPROX . 10 THICK
WINDOWS IN SIDE COLUMNS
EQUIPPED WITH:
AIR CLUTCH
AIR BRAKE
VARIABLE SPEED
JIC CONTROL PANEL
2.
VERSON 600 TON STRAIGHT SIDE SINGLE CRANK PRESS
FROM PLANT LIQUIDATION TO ONGOING OPERATION
MODEL SE1-600-48-48
SERIAL NUMBER 23891
STK#103648
APPROX. DATE OF MEG. 1971
================================
SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE AND TO VERIFICATION TO BUYER;
CAPACITY 600 TON
BED AREA 48'' x 48''
RAM AREA 48''x 48''
STOKE 24''
SHUT HEIGHT 58''
ADJUSTMENT 6''
SPEED 15-25 SPM
BOLSTER APPROX . 10 THICK
WINDOWS IN SIDE COLUMNS
EQUIPPED WITH:
AIR CLUTCH
AIR BRAKE
VARIABLE SPEED
JIC CONTROL PANEL
 
  240
IDMA31404
MakeWeingarten
Model
YOMRebuilt 2004
ConditionVery good condition
PhotoSee Photo
Capacity – 1000 Metric Tons / 1100 Tons
Stroke – 33”-838mm
SPM – 8 to 15 (Variable)
Bed size – 157” x 86”-3987 x 2184mm
Shut height – 59” (Over bolster)-1498mm
Adjustment – 14”-355mm
Windows
Cushions (bed and ram)
(3 unit machines 2 are sold)
 
  241
IDMA31401
MakeBliss
ModelSE4-800
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 800 Tons
Stroke: 24"
Shut Height, SDAU: 80"
Adjustment: 20"
Bed Area: 108" LR x 80" FB
Ram Size: 108" LR x 80" FB
Speed: 22 SPM
 
  242
IDMA31399
MakeWeingarten
ModelVK1000.43.85
YOMMechanically rebuilt in 2005
ConditionVery good condition
PhotoSee Photo
Capacity – 1000 Metric Tons / 1100 Tons
Stroke – 33” (850mm)
SPM – 8 to 15 (Variable)
Bed size – 160” x 86” (4000mm x 2200mm)
(171” / 4380mm between the uprights)
Shut height – 59” / 1500mm (Over bolster)
Adjustment – 14” (350mm)
Windows – 71” (1800mm) wide
Bed Cushions – 288 Metric tons, 0-300mm stroke, Pneumatic, adjustable
Slide Ejector Cushions – 100 Metric tons, 150mm stroke
Hydraulic Overloads
Quantity-3
 
  243
IDMA31368
MakeSpiertz
ModelTandem
YOM
Conditionexcellent working condition
PhotoSee Photo
Type : n. 4 ( four ) plunger
Force : 600 Ton.
Stroke : 600 mm
Stroke /min. : 18
Moving bolster dimension 2.950 mm x 1.670 mm
Slide dimension : 3.000 mm x 1.670 mm
Hydraulic overloading protection
Daylight : 1.300 mm
Lateral windows : 1.720 mm
complete of n.2 ( two ) lateral moving bolster
Cushion : NO
The 4 machines are still available, very very nice condition, modern electrical cabinets , last retrofit from 2004 up to 2009 and then very few used.
 
  244
IDMA31362
MakeWMW Erfurt,Germany
ModelPKZZIII250.1FS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity, ton 250
Centers of pressure 2
Idle stroke rate 12
Distance between the uprights, mm 2525
Shut height, mm 1080
Table dimensions, mm 2500 x 1400
Ram dimensions, mm 2450 x 1400
Ram stroke, mm 400
Ram adjustment, mm 400
Die cushion stroke, mm 120
Counter pressure of cushion, ton 50
Die cushion ejection pressure, ton 10
Main motor power, kW 41
Press weight, kg 33000
Quantity -4 no.
 
  245
IDMA31342
MakeSchuler
ModelS4-1500-210-96
YOM
ConditionGood Condition
PhotoSee Photo
Bed Size : 212" x 96"
Slide Size : "210 x 96"
Stroke : 36"
Adjustment : 20" (Motorized)
Shut Height : 54" SDAU
Speed : 10-24 SPM
 
  246
IDMA31338
MakeErfurt
ModelPKZZ500.1
YOM
ConditionGood Condition
PhotoSee Photo
Model PKZZ(IV) 500/2800
Two presses are for sale
Table size, mm 2800 x 1800
Ram size, mm 2800 x 1700
Ram stroke, mm 500
Ram adjustment, mm 500
Strokes per minute 20/25
Shut-height, mm 1100
Distance between columns, mm 2800
Stroke of cushion plate, mm 200
Counter pressure of cushion in bed, ton 100
Motor capacity, kW 75
Equipped with side moving bolsters
 
  247
IDMA31337
MakeErfurt
ModelPKZZ500.1
YOM
ConditionGood Condition
PhotoSee Photo
Model PKZZ IV 500.1
Two presses are for sale
Table size, mm 2800 x 1800
Capacity, ton 500
Ram size, mm 2800 x 1700
Ram stroke, mm 500
Ram adjustment, mm 500
Strokes per minute 20
Shut-height, mm 1100
Distance between columns, mm 2800
Stroke of cushion plate, mm 200
Counter pressure of cushion in bed, ton 100
Motor capacity, kW 75
Equipped with moving bolsters
 
  248
IDMA31336
MakeErfurt
ModelPKZZ500/2800
YOM
ConditionGood Condition
PhotoSee Photo
Model PKZZ IV 500.1
Two presses are for sale
Table size, mm 2800 x 1800
Capacity, ton 500
Ram size, mm 2800 x 1700
Ram stroke, mm 500
Ram adjustment, mm 500
Strokes per minute 20
Shut-height, mm 1100
Distance between columns, mm 2800
Stroke of cushion plate, mm 200
Counter pressure of cushion in bed, ton 100
Motor capacity, kW 75
Equipped with side moving bolsters
 
  249
IDMA31332
Make
ModelPD-20
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300t
Stroke Length : 300mm
SPM : 34
Bolster : 2000 x 1220mm
Slide : 1830 x 1000mm
Die Height : 820mm
Slide Adjust : 400mm
 
  250
IDMA31331
MakeKomatsu
ModelOBW200 K2
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity : 200t
Stokes : 20~40 spm
stroke length : 250 mm
Die Height : 520 mm
Slide adj. : 120 mm
Slide : 1850 x 650 mm
Bolster : 2400 x 800 x 130
 
  251
IDMA31330
MakeSchuler
Model
YOM
ConditionExcellent
PhotoSee Photo
excellent condition
Man: SCHULER
Force : 320 Ton.
Stroke : 400 mm
Stroke/min: 30
Slide regulation: 450 mm
Daylight : 1.150 mm
Frontal passage : 2.200 mm
Table : 2.130 mm x 1.220 mm
Slide : 2.130 mm x 1.220 mm
Cushion : NO
composed by 4 ( four ) single action presses & robot COMAU
 
  252
IDMA31325
MakeAIDA
Model
YOM
Conditionexcellent working condition
PhotoSee Photo
Capacity 200 ton
stroke 150 mm
SPM 60 - 150
Die Height 550 mm
Adjust 100 mm
Bolster 1500 x 1100 mm
Slide 1500 x 900 mm
Main Motor 30 Kw
having had regular maintenance
Machine Type high Speed H Frame Press
 
  253
IDMA31314
MakeAIDA
ModelNC2 2000
YOM2011
Condition
PhotoSee Photo
Capacity- 220 US Tons, Slide Stroke length- 150 mm, Strokes per minute- 40 to 80 spm, Slide adjusment- 110 mm, Maximum die height-450 mm, Bolster thickness- 170 mm, Slide area ( L-R X F-B)- 1850 x 650 mm, Bolster area- 2420 x 680 mm, Throat depth- 350 mm, Floor to top of bolster ( without mounts)- 1000 mm, Overall height- 3615 mm, Bed opening ( L-R X F-B) -1920 X 360 mm, Distance between frames- 1910 mm, Floor space ( L-R X F-B) - 2260 X 2160 mm, Drive Motor- 22 kW - 1650 rpm, Standard Voltage- 480 V/3 ph/60 Hz
 
  254
IDMA31313
MakeAIDA
ModelNC1 1500
YOM2011
Condition
PhotoSee Photo
Tonnage capacity- 165 US Tons, Rated Tonnage Point- 6 mm, Working Energy- 7,900 J, Slide stroke length ( maximum) - 200 mm, Slide Area ( L-R X F-B)- 700 x 580 mm, Bolster area ( L-R X F-B) -1250 x 760 mm, Maximum die height- 400 mm, Slide adjusment- 100 mm, Bolster thickness- 165 mm, Floor level to top of bolster- 900 mm, Maximum upper die weight- 255 kg, Main motor capacity- 40 kW, Prime power source- AC200V 60 Hz, Control voltage- DC24V AC100V, Required air pressure- 0.5 MPa, Approximate height above floor- 3240 mm, Approx total weight- 16 tons
 
  255
IDMA31307
MakeAmada,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity -200 ton
Stroke-203.2
SPM-20 - 40
Die Height-675.8 mm
Adjust-100 mm
Bolster-2320 x 740 mm
Slide-1800 x 650 mm
Die Cushion- Front 3.2 Rear 2.8 ton
Cushion Pad-100 x 350 mm x 2
 
  256
IDMA31286
Make
ModelS4-800-108-60QDC
YOM
ConditionGood Condition
PhotoSee Photo
USI CLEARING 800 TON PRESS
Model S4-800-108-60
Capacity – 800 Tons
Bed size – 108” x 60”
Stroke – 30”
Shut height – 61” (SDAU)
Adjustment – 20”
SPM – 18
Windows
Cushions (2 @ 108 Ton total capacity, 7” stroke)
Rolling bolster (through columns)
May be inspected in plant
(4) Available
 
  257
IDMA31281
MakeAIDA,Japan
ModelPDA80L
YOM1991
ConditionGood Condition
PhotoSee Photo
Machine name : PDA-80L
Serial No. : 12800-0732
Manufacturing year : 1991
Machine Capacity : 80tf
Slide Stroke : 25mm
Slide Strokes per minute : 160〜400
Die Height : 300mm
Slide Adjust : 50mm
Slide L.RxF.B : 800x450
Bolster L.RxF.B : 900x600
Voltage : 200V
 
  258
IDMA31277
MakeKomatsu
Model
YOM1998
ConditionGood Condition
PhotoSee Photo
Tandem Press line
Bolster area : 4000 x 2150 mm for 1000 tons
3400 x 2000 mm for 600 tons
Die height : 1500 mm for 1000 tons
1620 mm for 600 tons
Slide stroke : 600 mm for 1000 tons
750 mm for 600 tons
SPM : 12-18 Meters
Die cushion , moving bolster ,dry type clutch and brake
PLC Touch screen
 
  259
IDMA31271
MakeISIS
Model
YOM1985
ConditionGood Condition
PhotoSee Photo
High Speed Press
Machine Type : 82080SH
Serial No : 056
Capacity : 80 ton
Stroke Length : 30 mm
SPM : 150-400
Slide Adjust : 50mm
Die Height : 300mm
Bolster Area : 900x650x160mm
Bed Opening 650x200mm
TS130msec
 
  260
IDMA31270
MakeISIS
Model
YOM1986
ConditionGood Condition
PhotoSee Photo
High Speed Press
Machine Type: 83060
Serial No : U60 032
Capacity : 60 ton
Stroke Length : 25 mm
Slide Adjust : 30mm
Die Height : 250mm
Bolster Area : 800x580x145mm
Bed Opening : 600x180mm
TS : 230msec
 
  261
IDMA31259
MakeSchuler
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 500 t
Shut Height : 1220 mm
Slide adjustment : 325 mm
Stroke : 835 mm
Slide dimensions : 2750 x 1500 mm
Bolster plate (bed) dimensions : 2750 x 1500 mm
Height between bed to floor : 250mm
Bed cushion tonnage : 140 t
Bed cushion stroke : 250 mm
Strokes per minute : 12 to 24 spm
Air pressure : De 5 to 7 kg/cm2
Main engine power : 100 kW
Automatism circuits : 3
Moving bolster : Front single bolster movement
This line 4 Schuler presses available
Robots for available
SP. : 15,000
CP : 11,000
 
  262
IDMA31257
MakeEDELHOFF
ModelAZR250
YOM1976
ConditionGood Condition
PhotoSee Photo
Technical details Dimension Unit
table surface area 1100 x 850 mm
pressure 250 t
throat 400 mm
stroke 20 - 160 mm
ram adjustment 75 mm
no. of strokes 34 Hub/min
ram surface 800 x 540 mm
tool shank hole (depth x diameter) 65 x 105 mm
hole in the table 300 x 240 mm
weight 16,7 t
table height over floor 720 mm
shut height (stroke down, adjustm. up) 500 mm
total power requirement 18,5 kW
weight of the machine ca. 15 t
dimensions of the machine ca. 2,7 x 1,5 x 2.9 m
 
  263
IDMA31254
MakeSchuler
Model
YOM
ConditionGood Condition
PhotoSee Photo
Schuler Tandem press line four presses
4 Schuler 500 ton single action.
Blanking station / transfer,
All with rolling bolster left to right
Table size 3000 mm x 1800 mm
Stroke per minute 9-18
 
  264
IDMA31238
MakeAIDA,Japan
Model
YOM1978
ConditionGood Condition
PhotoSee Photo
Make : Aida
Capacity : 300 ton
Stroke : 75 mm
Die Height : 600 mm
Adjust : 80
SPM : 60-160
Bolster : 1700 X 1000
Slide : 1700 X 900 mm
Mail Motor : 37 Kw
 
  265
IDMA31232
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make : Aida
Capacity : 300 ton
Stroke : 450 mm
SPM : 16
Bolster : 2500 x 1520 mm
Slide : 2500 x 1420 mm
Die Height : 800 mm
Adjust : 200mm
Die Cushion : Yes
 
  266
IDMA31231
MakeKansai
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make : Kansai
capacity : 600 ton
Stroke : 400 mm
SPM : 10
Bolster : 3000 x 1500 mm
Die Cushion : Yes
 
  267
IDMA31230
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make : Aida
Capacity : 300 ton
Stroke : 350 mm
SPM : 15-25
Bolster : 2500 x 1300 mm
Slide : 2400 x 1000 mm
Die Height : 700 mm
Adjust : 100 mm
Machine Type : Transfer Unit
Feed Stroke : 400 mm
Clamp Stroke : 100 mm
SPM : 25
Finger Bar Width : 500 mm
Stages : 6
 
  268
IDMA31220
MakeAIDA,Japan
ModelC2-20(2)
YOM1979
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton
Stroke length :250mm
Stroke :20-35spm
Bolster size :2420*840mm
Slide size :1850*650mm
Die height: 500mm
Motor :22kw
Weight- 25 tons
 
  269
IDMA31218
MakeIHI,Japan
Model
YOM1984
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton
Make : IHI
Year : 1984
Points : 4
Stroke : 600 mm
SPM : 8 – 18
Die Height : 1350 mm
Adjust : 400 mm
Slide : 4000 x 2000 mm
Bolster : 4000 x 2000 mm
Die Cushion : 100 ton
Cushion Stroke : 200 mm
Bolster : Two left to right moving bolster
 
  270
IDMA31213
MakeEDELHOFF
Model
YOM1976
ConditionGood Condition
PhotoSee Photo
Capacity: 250 tons
Model : AZR
table surface area : 1100 x 850 mm
pressure : 250 t
throat : 400 mm
stroke : 20 - 160 mm
ram adjustment : 75 mm
no. of strokes : 34 Hub/min
ram surface : 800 x 540 mm
tool shank hole (depth x diameter) : 65 x 105 mm
hole in the table : 300 x 240 mm
weight : 16,7 t
table height over floor : 720 mm
shut height (stroke down, adjustm. up) : 500 mm
total power requirement : 18,5 kW
weight of the machine ca. : 15 t
dimensions of the machine ca. : 2,7 x 1,5 x 2.9 m
 
  271
IDMA31212
MakeBETZ
Model
YOM1980
ConditionGood Condition
PhotoSee Photo
Type : FZL
pressure : 300 t
throat : 420 mm
stroke : 30-140 mm
table-size : 1100 x 850 mm
no. of strokes : 32 Hub/min
ram adjustment : 105 mm
shut height (stroke down, adjustm. up) : 500 mm
total power requirement : 15 kW
weight of the machine ca. : 19,3 t
dimensions of the machine ca. : 2 x 3 x 3,5 m
 
  272
IDMA31211
MakeJelsingrad
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity 250 t
C frame
 
  273
IDMA31194
MakeAIDA,Japan
ModelHMX-300(1)
YOM
ConditionGood Condition
PhotoSee Photo
HMX Model Specifications (metric) Unit HMX-3000
Capacity kN 3000
Tonnage rating point (above B.D.C.) mm 3.2
Stroke length mm 30
Working energy: Min-Max spm J 3000 / 3000
Strokes per minute under no load spm 160 ~ 500
Micro-inching spm about 60
Die-height, slide to bolster mm Note 1 420~520
Slide adjustment mm 60
Slide area (L.R. x F.B.) mm 2000 x 750
Bolster area (L.R. x F.B.) mm 2000 x 1000
Bolster thickness mm Note 3 200
Bolster surface height above floor mm Note 4 (1000)
Max upper die weight t 01.мар
Side opening (F.B. x height) mm 560 x 420
Bed opening (L.R. x F.B.) mm 1700 x 400
Main motor kW 55
Power source V/Hz Note 5 200 / 50, 60
Dmjmt0t
Required air pressure MPa 0.5
 
  274
IDMA31193
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Type : Crank motion two point press
Model : TMX S2 8000(2) 360 120(S)
Pressing force capacity : 8000 (Left 4000 kN, Right 4000 kN) kN(4)
Capacity on each stage 1750 kN
Rated tonnage point 13 mm
Slide stroke length 510 mm
Bb7mlwqgkp
Continuous working energy 140 : at 12 spm (3) kJ
Number of continuous strokes under no load 12 25 (2 and 3 dimensions) spm
Micro inching Approx. 5 spm
Die height 1000 mm
Slide adjustment 100 mm
Slide area: L.R.xF.B. 3600 x 1200 mm
Bolster area: L.R.xF.B. 3600 x 1200 mm
Bolster height 450 mm
Floor level to top of bolster 450 mm
Number of stages 8 stages
Distance between stages 450 mm
Drawing depth under 2 axes: 170
3 axes: 130 mm
mm
Maximum upper die weight 6 (including common plate) t
Distance between inside columns 4400 mm
Side opening 2400 mm
Main motor DC 90 (Yaskawa make) kW
Prime motor source AC 380V, 220V, 50Hz, 3 ?, 3W
Voltage for main motor DC 400 V
Voltage for other motors AC 200 (stepped sown with transformer) V
Control circuit voltage AC 100, DC 24 V
Required air pressure 0.5 (To be increased to 0.8 MPa by booster valve) MPa

Ambient temperature 5~40 use only Celsius �C
Environmental humidity 45~90 (No new drops) %
Overall height above floor level Approx. 6900 mm
 
  275
IDMA31190
MakeAIDA,Japan
ModelNC2-200(2)
YOM1997
ConditionGood Condition
PhotoSee Photo
Capacity 2000 kN 200 tons
Bed area 2420 mm x 840 mm 95” x 33”
Slide area 1850 mm x 840 mm 73” x 33”
Thickness of bolster 170 mm 6.5”
Stroke 250 mm 10”
Adjustment 110 mm 4”
Shut height (SDAU) 500 mm 20”
Variable speed 25-45 spm 25-45 spm
Overall height above floor 3805 mm 12’ 6”
Approximate weight 27,000 kgs 27 tonnes
Features Floor mounted, Dimenco double sided decoiler, Dimenco RMHS
leveller (2015), roller tool loading system
 
  276
IDMA31184
MakeAIDA,Japan
Model
YOM2007
Conditionnever used
PhotoSee Photo
Model : NC2-250 (1)
Capacity : 250
Slide Stroke : 170mm
strokes per minute : No Load 25-30 spm
Die Height : 450 mm
Slide Adjustment : 100 mm
Slide Area : L.Rx F.B 2100 x 700 mm
Bolster Area : L.R. x F.B 2700 x 760 mm
Main Motor : 30 kW
Required Air Pressure : 5 kgf/cm2
 
  277
IDMA31183
MakeAIDA,Japan
ModelNC2-200(1)
YOM2007
Conditionnever used
PhotoSee Photo
Model : NC2-200 (1)
Capacity : 200
Slide Stroke : 150 mm
Strokes per minute No Load : 35-70
Die Height : 450 mm
Slide Adjustment : 110 mm
Slide Area : L.R x F.B 1850 650 mm
Bolster Area : L.R. x F.B 2420 x 680 mm
Main Motor : 22 kW
Required Air Pressure : 5 kgf/cm2
 
  278
IDMA31182
MakeAIDA,Japan
Model
YOM2007
Conditionnever used
PhotoSee Photo
Model : NC2-1600(2)E
Slide Dimensions a1x b2 : 1500 x 580
Bolster Dimensions a2x b2 : 2040 x 760
Bolster Thickness : 165
Frame Gap b2x h3 : 390 x 700
Inside Dimension of Frame a3 : 1590
Height of Top of bolster above floor level h1 : 900
Overall Height h2 : 3260
Location of Anchor Bolts a4,a'4 : 1730, 1630
Installation Dimensions a6x b6 : 2360 x 2040
Operation Panel Dimensions a7 : 285
Bed Hole Dimensions (LR x FB) 1590 x 380
Approximate Machine Weight : 19 t
 
  279
IDMA31181
MakeAIDA,Japan
ModelNC1-200
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton
Stroke: 160 mm
Speed: 35 ~ 70 spm
Year 1988
Model : nc 1 200
Die height: 410 mm
Adjustment: 110 mm
Slide adjust: Motor
Clutch type: Wet
 
  280
IDMA31179
MakeSpiertz
Model
YOM
ConditionExcellent
PhotoSee Photo
Type : n. 4 ( four ) plunger
Force : 600 Ton.
Stroke : 600 mm
Stroke /min. : 18
Moving bolster dimension : 2.950 mm x 1.670 mm
Slide dimension : 3.000 mm x 1.670 mm
Hydraulic overloading protection
Daylight : 1.300 mm
Lateral windows : 1.720 mm
complete of : n.2 ( two ) lateral moving bolster
Cushion : NO
 
  281
IDMA31175
MakeAIDA,Japan
ModelC2-20(2)
YOM1979
ConditionGood Condition
PhotoSee Photo
Stroke Length 250mm
Stroke Number 20~35
Die Height 500mm
Slide Adjust 110mm
 
  282
IDMA31174
MakeAIDA,Japan
ModelNC2-200(2)
YOM1985
ConditionGood Condition
PhotoSee Photo
Stroke length 250m
Stroke Number 25~45
Die Height 450mm
Slide Adjust 110mm
With Die Cushion.
 
  283
IDMA31171
MakeAIDA
ModelNC1-20(2)
YOM1983
ConditionGood Condition
PhotoSee Photo
Manufacture : AIDA
Country of origin : Japan
Press Capacity : 200 ton
Stroke length : 250 mm
Stroke per minute : 25-45 s.p.m
Die height : 450 mm
Slide adjustment : 110 mm
Slide area : 880x650 mm
Bolster area : 1390x840 mm
Motor power : 15 kW
 
  284
IDMA31170
MakeAIDA
ModelNC2-200(1)
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type : C frame press
Capacity : 200 ton
Stroke : 150 mm
SPM : 35-70
Die Height : 450 mm
Adjust : 110 mm
Bolster : 2420 x 680 mm
Slide : 1850 x 650 mm
Cushion Travel : 89 mm
Main Motor : 22 Kw
C frame presses are susceptible to cracking in the frame
However, the press that we are offering has been especially reinforced by Aida with external tie rods and welded supports on the side of the frame to strengthen the structure.
 
  285
IDMA31168
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type C Frame Press
Capacity 200 ton
SPM 20 - 40
Stroke 250 mm
Die Height 500 mm
Adjust 105 mm
Table 2400 x 800 mm
Slide 1830 x 650 mm
 
  286
IDMA31162
MakeErfurt
ModelPKZZ1250
YOM
ConditionGood Condition
PhotoSee Photo
Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 ton
Slider force at the distance of 250 mm in the lower dead point: 350 ton
Number of single strokes per minute: 11
Slider stroke: 630 mm
Slider adjustment: 630 mm
The closed height: 1165 mm
Table pillow:
-Max. stroke: 250 mm
-Stroke adjustment: 250 mm
-Max. holding force: 250 ton
-Max. ejection force: 40 ton
Table dimensions: 4000x1800 mm
Bolster dimensions: 3950x1800 mm
Table gap: 3750x1300 mm
Main motor power: 132 kW
Stay spacing: 4000 mm
Press weight: 215000 kg
 
  287
IDMA31156
MakeAIDA
ModelPC20
YOM
ConditionGood Condition
PhotoSee Photo
200 ton in working order. Press weight 24, 3T.
Shut height 450 mm.
 
  288
IDMA31147
MakeErfurt
ModelPKZZI2000
YOM
ConditionGood Condition
PhotoSee Photo
Centres of pressure : 2
Maximum force of slide 20,000 kN
Stroke of slide 630mm
Adjustability of slide Maximum daylight between boster and slide (stroke down, 630mm
adjustment up) 1,120 mm
Width between columns 4,000 mm
Slide area (width x depth) 3,950x 1,800mm
Bed area (width x depth) 4000x 1,800 mm
Opening in bed (width x depth) 3,750 x 1,300mm
Main motor rating 160 kW
Idle stroke rate 11 min-1
Counterpressure of cushion in bed 4,000 kN
Stroke of cushion plate 250mm
Height above ground, approx, 10,500 mm
 
  289
IDMA31146
MakeVerson
ModelS4-600-132-86
YOM1973
ConditionGood Condition
PhotoSee Photo
Capacity : 600 Tons
Bed Area : 132" x 86"
Shut height : 55.75"
Adjustment : 14"
Stroke : 22"
SPM : 14
Windows : 78"

Equipped With :
T Slotted Bolster
T Slotted Ram
Cushion with 11" Stroke

(4) Available
 
  290
IDMA31131
MakeSchuler
Model--
YOM
ConditionExcellent
PhotoSee Photo
Composed by 4 (four) single action presses with cushion
Force : 320 Ton.
Stroke : 400 mm
Stroke/min : 30
Slide regulation : 450 mm
Daylight : 1.150 mm
Frontal passage : 2.200 mm
Table : 2.130 mm x 1.220 mm
Slide : 2.130 mm x 1.220 mm
Cushion :
Force : 32 Ton.
Stroke : 250 mm
 
  291
IDMA31130
MakeBliss
Model--
YOM2003
ConditionExcellent
PhotoSee Photo
Tandem Press Line 400 Ton press, in excellent condition, composed by (three) Single action presses
Capacity : 400 ton
Stroke 600 mm
Slide : regulation : 400 mm
Stroke/min : 30
Moving bolster (lateral) : 2.800 mm x 1.700 mm
Main motor : 75 Kw
 
  292
IDMA31119
Make
ModelKA3540
YOM1988
ConditionGood Condition
PhotoSee Photo
Nominal Capacity, tf : 1000
Rated distance of slide above bottom, mm : 12
Slide stroke, mm : 400
Continuous run frequency, min-1 : 20
Single strokes maximum frequency, min-1 : 16
Shut height, mm : 810
Shut height adjustment, mm : 320
Slide dimensions, mm
left to right : 3100
front to back : 1700
Bolster plate dimensions, mm
left to right : 3100
front to back : 1800
Main drive electric motor power, kW : 132
Overall dimensions, mm : 5150
left to right : 4700
front to back : 7830
height above floor level
Press weight, ton : 193
 
  293
IDMI6961
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 600 t
Slide Stroke : 410 mm
Stroke Per Minute : At 2 Axis : 15 - 35 spm
No Load : At 3 Axis ; 15 - 25 spm
Die Height : 800 mm
Slide Adjustment : 100 mm
Slide Area : L.R x F.B : 3150 x 1250mm
Bolster Area : L.R. x F.B : 3150 x 1250 mm
Main Motor : 110 kW
Feed Stroke : 450 mm
Clamp Stroke : 140 mm
Lift Stroke : 70 mm
Required air pressure 45 kgf
 
  294
IDMA31092
MakeKansai
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type : Mechanical Press
Make : Kansai
Capacity : 600 ton
Stroke : 400 mm
SPM : 10
Bolster : 3000 x 1500 mm
Die Cushion : Yes
 
  295
IDMA31091
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type : Mechanical Press
Make : Aida
Capacity : 300 ton
Stroke : 350 mm
SPM : 15 - 25
Bolster : 2500 x 1300 mm
Slide : 2400 x 1000 mm
Die Height :700 mm
Adjust : 100 mm
Machine Type : Transfer Unit
Feed Stroke : 400 mm
Clamp Stroke : 100 mm
SPM : 25
Finger Bar Width : 500 mm
Stages : 6
 
  296
IDMA31090
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type : Mechanical Press
Make : Aida
Capacity : 300 ton
Stroke : 450 mm
SPM : 16
Bolster : 2500 x 1520 mm
Slide : 2500 x 1420 mm
Die Height : 800 mm
Adjust : 200 mm
Die Cushion : Yes
 
  297
IDMA31089
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type : Mechanical Press
Make : Aida
Capacity : 200 ton
Stroke : 250 mm
SPM : 25
Bolster : 1520 x 1070 mm
Slide : 1360 x 1000 mm
Die Height : 430 mm
Adjust : 125 mm
Die Cushion : Yes
 
  298
IDMA31088
MakeSchuler
ModelS4-600-3100-600
YOM1981
ConditionGood Condition
PhotoSee Photo
600 Ton Shuler Tandem Line
Specifications:
Capacity: 600 Tons
Bed Area: 133" x 74"
Shut height: 51.18"
Adjustment: 13.78"
Stroke: 35.43"
SPM: 8-25
Windows: 78"
Equipped With:
T Slotted Bolster
T Slotted Ram
150 Ton Cushion with 9.84" Stroke
(4) Available : 4
With Moving bolster
 
  299
IDMA31006
MakeHwail
Model
YOM2007
Condition
PhotoSee Photo
1000 ton mechanical press
Single action type
Stroke:600mm
SPM:20
Die height:1300mm
Slide adjustment:700mm
Slide area:3000m 1800mm
Bolster area:3000 x1800m
Bolster thickness:280mm
Main motor:DC 132KW 4P
Air pressure:5kg/cm2
(Die cushion)
1pad 2 cylinder
60ton x 2=120ton
Stroke:200-300mm
Pad:2300mm x1100mm
Air pressure:5kg/cm2
Adjust motor:5.5KW X6P
(Moving bolster)
Moving speed:10m/min
Weight of die:30ton
 
  300
IDMA30987
Make
ModelK3036A
YOM
ConditionExcellent
PhotoSee Photo
Rated force 400 tons
Slider stroke 350 mm
Distance between table and slider 1000 mm
Table size 4000х1100
Press weight 107 tons
Quantity- 2 nos
 
  301
IDMA30970
MakeKomatsu
ModelOBS60
YOM
Condition
PhotoSee Photo
Machine Type - C Frame Press
Make - Komatsu
Model - OBS-60
Capacity - 60 ton
SPM -70
Stroke - 150 mm
Die Height - 285 mm
Adjust - 70
Table -800 x 550 mm
Slide -450 x 350 mm
 
  302
IDMA30969
MakeKomatsu
ModelOBS110
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type - C Frame Press
Make - Komatsu
Model - OBS-110
Capacity - 110 ton
SPM - 50
Stroke - 150 mm
Die Height - 360 mm
Adjust - 100 mm
Table - 1100 x 700 mm
Slide - 600 x 550 mm
 
  303
IDMA30968
MakeKomatsu
ModelOBS150
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type - C Frame Press
Make - Komatsu
Model - OBS-150
Capacity - 150 ton
SPM - 20 - 55
Stroke - 250 mm
Die Height - 220 mm
Adjust - 100 mm
Table - 1250 x 800 mm
Slide - 700 x 550 mm
 
  304
IDMA30967
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type - C Frame Press
Make - Komatsu
Model - OBW-150
Capacity - 150 ton
SPM - 35 - 65
Stroke - 200 mm
Die Height - 460 mm
Adjust -100 mm
Table - 2000 x 760 mm
Slide - 1600 x 550 mm
 
  305
IDMA30965
MakeArisa
Model
YOM
ConditionVery good condition
PhotoSee Photo
Capacity- 400 tons, Variable Stroke- 20/250 mm, Ram adjusment- 150 mm, Continuous stroking rate- 30 st/min, Daylight- 545 mm, Table Area- 1200 x 1200 mm, Ram area- 1200 x 1050 mm, Motor- 30 KW, Height- 5600 mm, Weight of press -40 t, SC400 S
 
  306
IDMA30964
MakeErfurt
ModelPEE II 250
YOM
Condition
PhotoSee Photo
Capacity- 250 tons, Variable Stroke- 40-160, Ram adjusment- 110 mm, Continuous stroking rate- 50 std/min, Lower cushion- Yes
 
  307
IDMA30963
MakeErfurt
ModelPEE400
YOM
Condition
PhotoSee Photo
Capacity- 400 tons, Variable Stroke- 40-140 mm, Ram adjusment- 125 mm, Continuous stroking rate- 32std/min, Serial number- 48852, Daylight- 620 mm, Table area- 1250x780. Ram area- 800x630, lower cushion: motor- 20 kw, Dimensions: Width- 1600 mm, Depth- 3500 mm, Height- 3700 mm, Weight of press- 25 t
 
  308
IDMA30923
MakeKomatsu
ModelOBS150
YOM
Condition
PhotoSee Photo
Make Komatsu
Capacity 150 ton
Model OBS-150
Stroke 250 mm
Die Height 225 mm
Adjust 100 mm
SPM 20 - 55
Bolster 1250 x 800 mm
Slide 700 x 550 mm
 
  309
IDMA30917
MakeAIDA
Model
YOM
Condition
PhotoSee Photo
Make Aida
Capacity 300 ton
Stroke 80 mm
SPM 40 - 100
Bolster 2450 x 1200 mm
Slide 2450 x 1200 mm
Die Height 650 mm
Adjust 80 mm
 
  310
IDMA30916
MakeKomatsu
Model
YOM1981
Condition
PhotoSee Photo
Make Komatsu Komatsu Komatsu Komatsu Komatsu
Model OBS60B OBS60B OBS60B OBS60-2 OBS60-2
Year 1981 1981 1981 1986 1986
Capacity 60 60 60 60 60
Stroke 150 150 150 150 150
SPM 70 70 70 70 70
Die Height 285 285 285 285 285
Adjust 70 70 70 70 70
Slide Area 450Χ350 450Χ350 450Χ350 450Χ350 450Χ350
Bolster Area 800Χ550 800Χ550 800Χ550 900Χ550 900Χ550
 
  311
IDMA30913
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make - Aida
Capacity -200 tons
SPM 40 - 80
Bolster 1520 x 900 mm
Die Height 350 mm
Adjust 150 mm
 
  312
IDMA30901
MakeSchuler German
Model
YOM
ConditionGood Condition
PhotoSee Photo
Press capacity- 300 ton, Press movement- Link-Drive/Eccentric, Press size (Width)- 1524 mm (G), Press size ( Depth)- 1016 mm ( H), Race sleigh- 356 mm, Maximum slide opening (down stroke and top adjustment) 512 mm (D), Slide adjustment 203 mm (E), Bolster height 940 mm (F), Cushion Type
Number of pillows
Cushion capacity
Stroke pillow
Candle plane size
Opening between the uprights 1625mm(A)
Opening between the side uprights (width) 800mm(B)
Opening between the Side uprights (Height) 760mm(C)
Main motor power 45kW
Tool automation
 
  313
IDMA30894
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity - 200 ton
Stroke 300 mm
SPM 18 - 35
Die Height 600 mm
Adjust 200 mm
Slide 1850 x 1000 mm
Bolster 2000 x 1200 mm
 
  314
IDMA30892
MakeAIDA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make - Aida
Capacity - 200 tons
SPM 40 - 80
Bolster 1520 x 900 mm
Die Height 350 mm
Adjust 150 mm
 
  315
IDMA30885
MakeAIDA
ModelC2-20(2)
YOM
Condition
PhotoSee Photo
Capacity 200 ton
Stroke 150 mm
SPM 35 – 65
Die Height 450 mm
Slide 1850 x 650
Bolster 2420 x 680 mm

Uncoiler Leveller Feeder
Model LFS-40R
Coil Width 60 – 400 mm
Coil Thickness 0.5 – 2.3 mm
Coil Diameter 1200 mm
Feed Length 400 mm
Feed SPM 100
 
  316
IDMA30881
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity- 200 tons
SPM- 40-80
Bolster-1520 x 900 mm
Die Height-350 mm
Adjust-150 mm
 
  317
IDMA30875
Make
Model
YOM1984
ConditionGood Condition
PhotoSee Photo
SCHULER 400T mechanical press
Press Capacity 400 Tons
Rated Tonnage Point 12.5 mm
Distance between the a sliding table and slider 1018 mm
Slide Adjustment 305 mm
Motor power for adjusting the slider 5,5 kW ca. 1000 rpm
Slide Stroke 610 mm
Size of Slider 2743 x 1524 mm
Number of sliding tables 1
Size of Table 2743 x 1524 mm
Table height 400 mm
Number of air cushions in the table 2
Diameter of piston 1000 mm
Piston stroke 203 mm
number of strokes per minute 20
Cushion Capacity 70 Tons x 2 pcs.
Cushion Stroke 203 mm
Main Motor Capacity 60 KW ca. 1500 rpm
Moving Bolster Front Exit
QUANTITY- 2 NOS
 
  318
IDMA30859
MakeAIDA
ModelPDA-300L(1)
YOM1985
ConditionGood Condition
PhotoSee Photo
300Ton
Make - Aida
Model - PDA-300L(1)
 
  319
IDMA30858
MakeAIDA
ModelHMX-300(1)
YOM1996
ConditionGood Condition
PhotoSee Photo
300Ton
Make - Aida
Model - HMX-300(1),
 
  320
IDMA30851
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make Aida
Model PDC-15
Capacity 150 ton
Stroke 200 mm
SPM 30 – 60
Die Height 450 mm
Slide 1480 x 550
Bolster 1950 x 650 mm
Make Aida
Model LFS-60E
Width 100 – 600 mm
Thickness 0.5 – 4.5 mm
Coil Diameter 1500 mm
Feed Length 25 – 400 mm
Feed SPM - 100
 
  321
IDMA30850
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make Aida
Model C2-20
Capacity 200 ton
Stroke 150 mm
SPM 35 – 65
Die Height 450 mm
Slide 1850 x 650
Bolster 2420 x 680 mm
 
  322
IDMA30832
MakeNiagara
ModelSE2-600-108-60
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 Ton
Bed Area: 108” x 60”
Shut Height: 42”
Adjustment: 12”
Stroke: 20”
SPM: 18
Widows: 74”
Cushion
 
  323
IDMA30715
MakeAmada,Japan
Model
YOM
Condition
PhotoSee Photo
200 ton Aida
Capacity 200 tons
Stroke 150 mm
SPM 30 -75
Die Height 450 mm
Bolster 2400 x 700 mm
 
  324
IDMA30714
MakeAIDA,Japan
Model
YOM
Condition
PhotoSee Photo
Capacity 160 ton
Stroke 250 mm
SPM 20 - 40
Die Height 435 mm
Bolster 2000 x 700 mm
 
  325
IDMA30713
MakeKomatsu
Model
YOM
Condition
PhotoSee Photo
H Frame Press
Capacity -300 ton
Stroke-500 mm
SPM-15
Shut Height-1700 mm
Adjust-300 mm
Bolster-2200 x 1500 mm
Slide-2200 x 1500 mm
Die Cushion-100 ton
Cushion Stroke-260 mm
 
  326
IDMA30712
MakeKomatsu
Model
YOM
Condition
PhotoSee Photo
Type-H Frame Press
Capacity -400 ton
Stroke-800 mm
SPM-24
Die Height-1300 mm
Adjust-500 mm
Bolster-2740 x 1650 mm
Slide-2740 x 1650 mm
Die Cushion-75 ton
Cushion Stroke-305 mm
Main Motor-75 Kw
 
  327
IDMA30607
Make
Model
YOM2015
Condition
PhotoSee Photo
Capacity:2000ton
Make:Jiwon(Korea)
Limit of capacity;13mm
Slide stroke:800mm
SPM:12~20
Dieheight:1600mm
Adjustment of slide:700mm
Slide area:5000 x2600mm
Bolster area:5000 x2600mm
Moving bolster:Right moving , Speed: 10m/min
Main motor:250KW x 4p
Slide adjust motor:22kw x6p
Air:5.0kg/cm2
Power source:380V x 60hz
(Die cushion)
Capacity:300ton
Stroke:300mm
Pad size:4200 x2000mm
Die cushion adjust motor:5.5 x6p
Stroke adjustment:0~300mm
 
  328
IDMA30595
Make
Model
YOM2015
Condition
PhotoSee Photo
Jiwon(Korea)
Capacity:2000ton
Slide stroke:800mm
SPM:12~20
Die height:1600mm
Bolster area:5000 x2600mm
Moving bolster: Right moving , Speed: 10m/min
 
  329
IDMA30539
MakeWarco
Model
YOM
ConditionGood Condition
PhotoSee Photo
300 Ton Warco 84" x 60", 20" stroke, 36" shut height, 17 spm, 50 ton cushion
 
  330
IDMA30538
MakeClearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61
ton cushion
 
  331
IDMA30537
MakeClearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61 ton cushion
 
  332
IDMA30536
MakeClearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61
ton cushion
 
  333
IDMA30535
MakeClearing
Model
YOM
Condition
PhotoSee Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61
ton cushion
 
  334
IDMA30533
MakeBliss
Model
YOM
Condition
PhotoSee Photo
400 Ton Bliss 108" x 72" 24" stroke, 40" shut height, 13 spm, 70 ton
cushion
 
  335
IDMA30531
MakeBliss
Model
YOM1976
ConditionGood Condition
PhotoSee Photo
Model: SE1-600-42-48
Capacity: 600 ton
Bed Area: 42” x 48”
Stroke Length: 16”
Shut Height: 34”
Adjustment: 12”
Strokes Per Minute: 16

Equipped With:
24” x .375” x 30,000 Lbs Coe Servo Feed Line
Helm Loadgard Tonnage Monitor
 
  336
IDMA30522
MakeAIDA,Japan
ModelC1-11(2)
YOM1980
ConditionGood Condition
PhotoSee Photo
Stroke Length 180 mm
SPM 50
Die Height 350 mm Adjust 90 mm
Slide Size 600 x 520 mm
Bolster Size 1080 x 680 mm
with die cushion
 
  337
IDMA30521
MakeAIDA,Japan
ModelNC1-8(2)
YOM1990
Conditionrebuilt partially
PhotoSee Photo
Stroke Length 160 mm
SPM 40 - 75
Die Height 320 mm Adjust 80 mm
Slide Size 540 x 460 mm
Bolster Size 950 x 600 mm
with die cushion
installed new vibroisolation mount &
new safety light curtain sensor
 
  338
IDMA30520
MakeAIDA,Japan
ModelNC1-8(2)
YOM1990
Conditionrebuilt partially
PhotoSee Photo
Stroke Length 160 mm
SPM 40 - 75
Die Height 320 mm Adjust 80 mm
Slide Size 540 x 460 mm
Bolster Size 950 x 600 mm
installed new vibroisolation mount & new safety light curtain sensor
 
  339
IDMA30519
MakeAIDA,Japan
ModelNC1-8(2)
YOM1986
Conditionrebuilt partially
PhotoSee Photo
Stroke Length 160 mm
SPM 40 - 75
Die Height 320 mm Adjust 80 mm
Slide Size 540 x 460 mm
Bolster Size 950 x 600 mm
installed new vibroisolation mount & new safety light curtain sensor
 
  340
IDMA30518
MakeAIDA,Japan
ModelNC1-8(2)
YOM1985
Conditionrebuilt partially
PhotoSee Photo
Stroke Length 160 mm
SPM 40 - 75
Die Height 320 mm Adjust 80 mm
Slide Size 540 x 460 mm
Bolster Size 950 x 600 mm
with die cushion
installed new vibroisolation mount &
new safety light curtain sensor
 
  341
IDMA30517
MakeAIDA,Japan
ModelNC1-8(1)
YOM1984
ConditionReconditioned
PhotoSee Photo
Stroke Length 100 mm
SPM 55 - 110
Die Height 300 mm Adjust 80 mm
Slide Size 540 x 460 mm
Bolster Size 950 x 600 mm ( new one )
installed new vibroisolation mount &
new safety light curtain sensor
 
  342
IDMA30481
MakeVerson
ModelS2-600-120-72T
YOM
Condition
PhotoSee Photo
600 Ton Verson S2-600-120-72T with 10" Stroke, 20 to 40 SPM
 
  343
IDMA30475
MakeAmada,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
Stroke: 150 mm,
SPM: 30-75
Die height: 450 mm,
Bolster: 2400 x 700 mm
 
  344
IDMA30474
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 150 ton,
Stroke:250 mm,
SPM: 20-40
Die height:435 mm,
Bolster: 2000 x 700 mm
 
  345
IDMA30473
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
C frame
Capacity: 160 ton,
Stroke: 250 mm,
SPM: 20-40
Die height: 435 mm,
Bolster: 200 x 700 mm
 
  346
IDMA30442
MakeAIDA,Japan
Model
YOM
ConditionExcellent condition,under power
PhotoSee Photo
C frame press,
Capacity: 200 ton,
Stroke: 250 mm,
SPM: 20-40
Die height: 500 mm,
Adjust: 105 mm,
Bolster: 2400 x 800 mm,
Slide: 1830 x 650 mm,
Die cushion: 32 tons,
Cushion stroke: 125 mm,
Main motor: 15 Kw
 
  347
IDMA30412
MakeWMW Erfurt,Germany
ModelPKZZ1250
YOM1985
ConditionGood Condition
PhotoSee Photo
Capacity: 1250 ton,
Centers of pressure: 2
idle stroke rate: 11
Distance between the uprights: 4000 mm,
Shut height: 1165 mm,
Table dimensions: 4000 x 1800 mm,
Table gap: 37050 x 1300 mm,
Ram dimensions: 3950 x 1800 mm,
Ram stroke: 630 mm,
Ram adjustment: 630 mm,
Die cushion capacity: 250 ton,
Greatest depth of extraction: 250 mm,
Main motor power: 132 kW,
Press weight: 215000 kg.
 
  348
IDMA30387
MakeKomatsu
ModelOBS200-5
YOM1996
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
SPM: 25-50
Stroke: 250 mm,
Slide adjustment: 120 mm,
Slide area: 850 x 650 mm,
Bed area: 1450 x 840 x 190 mm,
Quantity: 9 nos
 
  349
IDMA30368
MakeISIS
ModelU60II
YOM2005
ConditionGood Condition
PhotoSee Photo
Capacity: 600 ton,
Stroke length: 25 mm,
SPM: 80~500
Die height: 280/325 mm,
Adjustment of slide: 40 mm,
Bolster area: 800 x 580 x 125 mm,
Slide area: 800 x 400 mm,
Bed opening: 600 x 80 mm,
Motor: 15 kw,
Voltage: 220 V
Machine weight: 1000 kg.
 
  350
IDMA30367
MakeAIDA,Japan
ModelPD20
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
SPM : 34,
Bolster size : 2000 x 1220,
Slide size : 1830 x 1000,
Die height : 820,
Slide Adjust : 400,
Cushion : Yes.
 
  351
IDMA30366
MakeISIS
Model80LF
YOM2005
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Stroke length: 25 mm,
SPM: 200~500 SPM,
Die height: 310 mm,
Adjustment of slide: 25 mm,
Bolster area: 1300 x 700 x 155 mm,
Slide area: 1300 x 570 mm,
Bed area: 1100 x 120 mm,
Motor: 30 kw x 4 p
Voltage: 220 V
Machine weight: 17000 kg.
Quantity: 1 nos
 
  352
IDMA30365
MakeISIS
ModelU80III
YOM2003-2004
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Stroke length: 25 mm,
SPM: 200~500,
Die height: 290 mm,
Adjustment of slide: 65 mm,
Bolster area: 1100 x 700 x 165.5 mm,
Slide area: 1100 x 570 mm,
Bed opening: 850 x 130 mm,
Motor:22 kw x 4 P
Voltage: 220 V
Machine weight: 13000 kg
Quantity: 6 nos
 
  353
IDMI6758
MakeKaushiko,Indian
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 100 ton
 
  354
IDMI6757
MakeAmeteep
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 120 ton
 
  355
IDMI6756
MakeGodrej,India
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 100 ton
 
  356
IDMI6755
MakeMaster
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 160 ton
 
  357
IDMA30359
MakeKomatsu
ModelOBS-80-3B
YOM1995
ConditionGood Condition
PhotoSee Photo
Capacity: 80 ton
 
  358
IDMA30358
MakeKomatsu
ModelE2G300-K3M
YOM1993
ConditionGood Condition
PhotoSee Photo
300 ton, S:450, 15~25 rpm, DH:650, SLAJ: 200, BL:2100*1350*180, SL: 1900*1200, DC, ORII LEVELER FEEDER(ROLL LENGTH:800, t0.3~4.5)
 
  359
IDMA30357
MakeAmada,Japan
ModelTP-110CX2
YOM1990
ConditionGood Condition
PhotoSee Photo
110 ton, S:150, 40~75 spm, DH: 365, SLAJ: 100, BL: 1100*700, SL: 600*500, LIGHT GUARD
 
  360
IDMA30356
MakeAmada,Japan
ModelTP-80C
YOM1988
ConditionGood Condition
PhotoSee Photo
80 ton, S:180, 50 spm, DH:350, SLAJ: 80, BL:1000*600, SL: 550*450, LIGHT GUARD, DC
 
  361
IDMA30355
MakeAIDA,Japan
ModelPS-30(2)
YOM1982
ConditionGood Condition
PhotoSee Photo
Single crank , straight side frame press,
Capacity: 300 ton,
Stroke length: 250 mm,
Die height: 545 mm,
Adjust: 125 mm,
SPM: 20-35
Slide size: 900 x 900 mm,
Bolster size: 110 x 900 mm,
Equipped
Safety light curtain sensor (new) vibroisolation mount
 
  362
IDMA30354
MakeAIDA,Japan
ModelC1-11(2)
YOM1980
ConditionGood Condition
PhotoSee Photo
C frame press,
Capacity: 110 ton,
Stroke length: 180 mm,
SPM: 50
Die height: 350 mm,
Adjust: 90 mm,
Slide size: 600 x 520 mm,
Bolster size: 1080 x 680 mm,
With die cushion
3 units
 
  363
IDMA30353
MakeAIDA,Japan
ModelNC1-8(2)
YOM1990
ConditionGood Condition
PhotoSee Photo
C frame press
Capacity: 80 ton,
Stroke length: 160 mm,
SPM: 40-75
Die height: 320 mm,
Adjust: 80 mm,
Slide size: 540 x 460 mm,
Bolster size: 950 x 600 mm,
with die cushion
installed new vibroisolation mount &
new safety light curtain sensor
 
  364
IDMA30352
MakeAIDA,Japan
ModelNC1-8(2)
YOM1990
ConditionGood Condition
PhotoSee Photo
C frame press
Capacity: 80 ton,
Stroke length: 160 mm,
SPM: 40-75
Die height: 320 mm,
Adjust: 80 mm,
Slide size: 540 x 460 mm,
Bolster size: 950 x 600 mm,
installed new vibroisolation mount &
new safety light curtain sensor
 
  365
IDMA30351
MakeAIDA,Japan
ModelNC1-8(2)
YOM1986
ConditionGood Condition
PhotoSee Photo
C frame press
Capacity: 80 ton,
Stroke length: 160 mm,
SPM: 40-75
Die height: 320 mm,
Adjust: 80 mm,
Slide size: 540 x 460 mm,
Bolster size: 950 x 600 mm,
installed new vibroisolation mount &
new safety light curtain sensor
 
  366
IDMA30350
MakeAIDA,Japan
ModelNC1-8(2)
YOM1985
ConditionGood Condition
PhotoSee Photo
C frame,
Capacity: 80 ton,
Stroke length: 160 mm,
SPM: 40-75
Die height: 320 mm,
Adjust: 80 mm,
Slide size: 540 x 460 mm,
Bolster size: 950 x 600 mm,
with die cushion
2 units
installed new vibroisolation mount &
new safety light curtain sensor
 
  367
IDMA30349
MakeAIDA,Japan
ModelNC1-8(1)
YOM1984
ConditionGood Condition
PhotoSee Photo
C frame press
Capacity: 80 ton,
Stroke length: 100 mm,
SPM: 55-110
Die height: 300 mm,
Adjust: 80 mm,
Slide size: 540 x 460 mm,
Bolster size: 950 x 600 mm (new one)
Installed new vibroi solation mount and new safety light curtain sensor
 
  368
IDMA30348
MakeOKK,Japan
ModelDC-200 B3-S
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
Stroke of slide: 300 mm,
Slide adjustment: 25 spm,
Die height: 600 mm,
Bolster size: 1800 x 1200 mm (RL x FB)
Bottom size of slide: 1650 x 100 mm
 
  369
IDMA30347
MakeAIDA,Japan
ModelC1-20(2)
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
Stroke of slide: 250 mm,
Strokes per minute: 25-45 spm,
Die height: 450 mm,
Bolster size: 1420 x 840 mm (RL x FB)
Bottom size of slide: 850 x 640 mm (RL x FB)
Main motor capacity: 3 ψ 220 v 15 kw
 
  370
IDMA30332
MakeIngyu
ModelIHD-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 tons
- Stroke: 30 mm
- Speed: 400 spm
- Die Height: 420 mm
- Slide Size: 2000 x 750 mm
- Bolster Size: 2000 x 1000 mm
 
  371
IDMA30323
MakeKomatsu
Model
YOM
ConditionVery good condition
PhotoSee Photo
Capacity:1500 ton
Stroke: 500 mm
Die Height: 750 mm
SPM:16
Bolster: 1500 x 1400 mm
Slide: 1500 x 1400 mm
Die Cushion: 30 tons
 
  372
IDMA30289
MakeShinohara
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 150 ton,
Stroke: 150 mm,
SPM: 40,
Bolster: 800 x 740 mm,
Slide; 460 x 410 mm,
Die height: 405 mm,
Adjust: 80 mm,
Die cushion: 10 tons,
Cushion stroke: 130 mm,
Main motor: 11 Kw
 
  373
IDMA30267
MakeWMW Erfurt,Germany
ModelPKZVI800FS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton, Quantity: 2 nos
 
  374
IDMA30261
MakeAIDA,Japan
ModelPL2-200
YOM
ConditionExcellent ,unused
PhotoSee Photo
Capacity: 200 ton
Stroke: 150 mm
SPM: 30 - 60
Bolster: 2200 x 1500 mm
Slide:2200 x 1500 mm
Die Height: 800 mm
Adjust: 150 mm
Main Motor: 22 Kw

Uncoiler Leveler Feeder
Make: Aida
Coil Width: 500 - 1525 mm
Coil Thickness: 0.6 - 2.0 mm
Coil Capacity: 15 ton
Coil Diameter: 500 x 1600 mm
Feed Length: 70 - 1500 mm
 
  375
IDMA30260
MakeAIDA,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity: 200 tons
Stroke: 250 mm
SPM: 25
Die Height: 450 mm
Adjust: 125 mm
Bolster: 1520 x 1070 mm
Slide: 1360 x 1000 mm
The press has die cushions
 
  376
IDMA30251
MakeWMW Erfurt,Germany
ModelPKZVI800FS
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton
 
  377
IDMA30232
MakeKomatsu
ModelE2P200-2
YOMJuly 1980
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
Stroke length: 300 mm,
SPM: 36 mm,
Die height: 600 mm,
Slide adjust: 200 mm,
Slide size: 2500 x 1100 mm,
Bolster: 2500 x 1200 mm.
 
  378
IDMA30213
MakeWMW Erfurt,Germany
ModelPKZVIII500.1FS
YOM
ConditionGood Condition
PhotoSee Photo
Max. pressing force of slide (at 12,5 mm distance to the lower dead point): 500 tons
Max. pressing force of slide (at 200 mm distance to the lower dead point): 160 tons
Number of single strokes at continuous work per minute: 20
Distance between side columns: 2800 mm
Slide stroke: 500 mm
Slide adjustment: 500 mm
Max. extract depth: 200 mm
Max. shut height between bolster plate and slide (stroke down, adjustment up): 1200 mm
Height of pull-out table: 500 mm
Bed area (width x depth): 3150 x 2100 mm
Slide area (width x depth): 3150 x 2100 mm
Opening in the bed (width x depth): 2500 x 1600 mm
Main motor power: 75 kW
Number of no-load strokes per minute: 20
Cushion force in the bolster: 100 tons
Cushion stroke: 200 mm
Cushion plate dimensions: 2480 x 1580 mm
Height above floor: 7200 mm
 
  379
IDMA30196
MakeWMW Erfurt,Germany
ModelPKZZ1250
YOM
ConditionGood Condition
PhotoSee Photo
1250 tons , ram stroke 630 mm , 11 SPM , shut height 1165 mm , bolster plate to ram adjustment stroke 630 mm , bed 4000 x 1800 mm , ram 3950 x 1800 mm , stroke of pneumatic cushion/table 250 mm , cushions power 250 tons , main drive motor 125 kW , dimensions 7000 x 4300 x 9500 mm , press weight 245 tons.
 
  380
IDMA30192
MakeShinohara
ModelPL2-350A-25
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 350 ton,
Stroke : 450 mm,
SPM : 16,
Die Height : 900 mm,
Adjust : 220 mm,
Bolster : 2500 x 1440 mm,
Slide : 2500 x 1300 mm,
Die Cushion : 66 ton,
Cushion Stroke : 20 - 230 mm.
 
  381
IDMA30190
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
SPM : 20,
Die Height : 850 mm,
Adjust : 430 mm,
Bolster : 2000 x 1220 mm,
Slide : 1830 x 1000 mm,
Main Motor : 18.5 Kw.
 
  382
IDMA30189
MakeWashio
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 350 ton,
Stroke : 500 mm,
SPM : 15,
Die Height : 900 mm,
Adjust : 270 mm,
Bolster : 2500 x 1400 mm,
Slide : 2300 x 1400 mm,
Die Cushion : 60 ton,
Cushion Stroke : 260 mm.
 
  383
IDMA30180
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 350 ton,
Stroke : 500 mm,
SPM : 20,
Adjust : 400 mm,
Die Height : 950 mm,
Bolster : 2500 x 1520 mm.
 
  384
IDMA30176
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
SPM : 20,
Die Height : 850 mm,
Adjust : 430 mm,
Bolster : 2000 x 1220 mm,
Slide : 1830 x 1000 mm,
Die Cushion : 30 ton,
Stroke : 150 mm,
Pad Size : 1500 x 700 mm,
Main Motor : 18.5 Kw.
 
  385
IDMA30175
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
SPM : 25,
Die Height : 820 mm,
Adjust : 430 mm,
Bolster : 2000 x 1220 mm,
Slide : 2000 x 1000 mm,
Main Motor : 30 Kw.
 
  386
IDMA30117
MakeAIDA,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity: 200 tons
Stroke: 250 mm
SPM: 25
Die Height:450 mm
Adjust: 125 mm
Slide:1360 x 1000 mm
Bolster:1520 x 1070 mm
 
  387
IDMA30111
MakeWMW Erfurt,Germany
ModelPKZZI1250/4000
YOM
ConditionGood Condition
PhotoSee Photo
Max. slider force at the distance of : 12,5 mm in the lower dead point : 1250 tons,
Slider force at the distance of : 250 mm in the lower dead point : 350 tons,
Number of single strokes per minute : 11,
Slider stroke : 630 mm,
Slider adjustment : 630 mm,
The closed height : 1165 mm,
Table pillow :-
-Max. stroke : 250 mm,
-Stroke adjustment : 250 mm,
-Max. holding force : 250 tons,
-Max. ejection force : 40 tons,
Table dimensions : 4000 x 1800 mm,
Bolster dimensions : 3950 x 1800 mm,
Table gap : 3750 x 1300 mm,
Main motor power : 132 kW,
Stay spacing : 4000 mm,
Press weight : 215000 kg.
Weight of a table in assembly with an exhaust pillow and a plate of a pusher : 42600 kg,
Weight of a table (without built in details) : 27400 kg,
Weight of an exhaust pillow : 3000 kg,
Weight of a plate of a pusher : 5400 kg,
Weight of a lateral rack in assembling : 8000 kg,
Weight of a cross-arm in assembling : 44000 kg,
Weight of a cross-arm without built in details : 24800 kg,
Weight of the top part of a cross-arm : 7800 kg,
Weight of a shaft of a flywheel with a pine forest with a muff and brakes : 16900 kg,
Weight of a slider in assembling : 33600 kg,
Weight of coupling bolts : 3400 kg.
 
  388
IDMA30108
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton
SPM: 60
Adjust: 100 mm
Bolster: 1850 x 1100 mm
Slide:1850 x 1100 mm
Die Height:450 mm
Uncoiler Leveler Feeder Unit
Make: Sonoruka
Coil Capacity: 5000 Kg
Coil Diameter: 800 x 1500 mm
Sheet Thickness:0.5 - 3.2 mm
Sheet Width: 70 - 600 mm
Feed Length: 60 spm
 
  389
IDMA30093
MakeKomatsu
ModelOBS150
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity:150 ton
Stroke: 200 mm
SPM:27 - 55
Adjust: 100 mm
Bolster:1250 x 800 mm
Slide:700 x 550 mm
Die Height:450 mm
Die Cushion Capacity:14 ton
Die Cushion Stroke;130 mm
Cushion Pad:650 x 420 mm
 
  390
IDMA30083
MakeWMW Erfurt,Germany
ModelPKZZ800
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton
 
  391
IDMA30063
MakeFukui
ModelMDC300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton
Stroke:450 mm
SPM:10 - 20.
Die Height:675 mm
Bolster:2150 x 1350 mm
Slide:2000 x 1200 mm
Adjust:200 mm
Die Cushion:2 x 25 ton = 50 ton
Pa:2 pads
Pad Size:850 x 900 x 2
Cushion Stroke:250 mm
 
  392
IDMA30053
MakeShinohara
ModelDA300D
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 300 mm,
SPM : 18 - 35,
Die Height : 650 mm,
Bolster : 2650 x 1220 mm,
Slide : 2500 x 1220 mm,
Adjust : 200 mm,
With Die Cushion,
With Feed Unit.
 
  393
IDMA30035
MakeCowlishaw Walker
ModelS1-600-48-8
YOM1975
ConditionGood Condition
PhotoSee Photo
Capacity: 600 ton
Bed area: 1050 x 1050 mm
Stroke: 200 mm,
Adjustment: 150 mm
Shut height SDAU max: 22Ό”
Shut height SDAU min: 16Ό”
Speeds: 25 spm

No cushion, complete with Wyko BHP single expanding mandrel decoiler, snubber, peeler, pinch rolls,
Levelling rolls, coil car, coil holder, 258 mm wide x 1-3.5 mm strips or 1-3 mm coils x 2.5 tonne coil
weight, fully guarded, scrap removal system.
 
  394
IDMA30034
MakeWilkins & Mitchell
ModelS3-450-210-127-36
YOM1979
ConditionGood Condition
PhotoSee Photo
Capacity: 450 ton
Bed area: 1800 x 900 mm,
Stroke:125 mm,
Adjustment:150 mm,
Shut height SDAU max: 475 mm
Shut height SDAU min: 325 mm,
Speeds: 25-60 spm
Capacity:210 ton
Bed area: 1375 x 900 mm
Stroke: 125 mm,
Adjustment: 150 mm
Shut height SDAU max: 23½”
Shut height SDAU min:17½”

Progression press complete with 2 beds, Servo press coil feed including single expanding mandrel
decoiler, snubber, peeler, flattener, 360 mm maximum width x 1 - 5 mm gauge x 2 tonne coil weight,
rising screen guards and scrap conveyor system.
 
  395
IDMA29997
MakeSato
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 450 mm,
SPM : 16,
Die Height : 860 mm,
Bolster : 2130 x 1370 mm,
Slide : 2130 x 1370 mm,
Adjust : 200 mm,
Die Cushion : 2 x 24 ton = 48 ton,
Pad : 2 pads,
Pad Size : 850 x 900 x 2,
Cushion Stroke : 230 mm.
 
  396
IDMA29920
MakeOKK
ModelDCM300B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 400 mm,
SPM : 16,
Die Height : 725 mm,
Bolster : 2050 x 1500 mm,
Slide : 1800 x 1200 mm,
Adjust : 200 mm,
Die Cushion : 50 ton,
Pad : 1 Pad,
Pad Size : 1500 x 860 mm,
Cushion Stroke : 225 mm.
 
  397
IDMA29883
MakeOKK
ModelDCM-300BIII
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Stroke: 450 mm,
SPM: 18,
Die height: 700 mm,
Bolster: 2150 x 1350 mm,
Slide: 1900 x 1200 mm,
Adjust: 200 mm,
Die cushion: 50 ton,
Pad: 1 pad,
Pad size: 1500 x 860 mm,
Cushion stroke: 225 mm,
 
  398
IDMA29879
MakeTMP Voronezh Russia
ModelK3537
YOM1974
ConditionGood Condition
PhotoSee Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
 
  399
IDMA29875
MakeTMP Voronezh Russia
ModelKB3537
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
 
  400
IDMA29825
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Stroke: 500 mm,
SPM: 16,
Bolster: 2800 x 1600 mm,
Slide: 2800 x 1600 mm,
Die height: 1100 mm,
Die cushion capacity: 100 ton,
Die cushion stroke: 250 mm,
Quantity: 2 nos
 
  401
IDMA29673
MakeAIDA,Japan
ModelC2-16(2)-B
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 160 ton,
Stroke : 230 mm,
Stroke Per Minute : 30 - 46,
Die Height : 435 mm,
Bolster : 2020 x 760 mm,
Slide : 1500 x 580 mm,
Adjust : 100 mm,
Motor : 22 Kw.
Type:Transfer Feeder
Make: Aida
Model: TCV-3T
Feed Stroke: 180 mm
Feed Stroke: 200 mm
Feed Stroke: 230 mm
Clamp Wdth: 300 mm
Clamp Wdth:350 mm
Clamp Stroke:90 mm
Lift Stroke:30 mm
Stage:8 7 6
2nd Axis Stroke:30 - 46 spm
3rd Axis Stroke:35 spm
 
  402
IDMA29669
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity: 350 ton,
Stroke: 500 mm,
SPM: 20,
Bolster: 2500 x 1520 mm,
Slide: 2500 x 1520 mm,
Die height: 950 mm,
Adjust: 400 mm,
Die cushion: 1 pad,2 cylinders,
Die cushion capacity: 60 tons,
Cushion stroke: 250 mm,
Main motor: 37 Kw.
Uncolier Leveler Feeder Unit :-
Make : Sonoruka,
Coil Capacity : 5000 kg,
Coil Diameter : 800 x 1500 mm,
Sheet Thickness : 1.0 - 3.2 mm,
Sheet Width : 100 -- 600 mm,
Feed Length : 50 spm.
 
  403
IDMA29656
MakeWMW Erfurt,Germany
ModelPKZV800/4000
YOM
ConditionGood Condition
PhotoSee Photo
Max. force of slide: 800 tons
Stroke of slide: 500 mm
Adjustability of slide: 500 mm
Max. daylight between bolster and slide (SDAU): 1200 mm
Width between columns: 4000 mm
Slide area (WxD): 4000x2500 mm
Bed area (WxD): 4000x2500 mm
Opening in bed (WxD): 3520x1520 mm
Moving table height: 630 mm
Main motor power: 90 kW
Idle stroke rate per 1 min: 14
Counterpressure of cushion in bed: 160 tons
Stroke of cushion plate: 200 mm
Height above ground: 8400 mm
Press weight: 210000 kg
 
  404
IDMA29641
MakeInnocenti Blanch - USI Clearing
ModelS2-400-108-60
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Bed area : 2743 x 1524 mm,
Stroke : 610 mm,
Shut height : 1118 mm,
Speed : 20 spm,
Adjustment : 305 mm,
Slide area : 2743 x 1524 mm,
Number of cushions : 2,
Cushion stroke : 203 mm,
Quantity : 4.
 
  405
IDMA29636
MakeDanly
ModelS1-800-60-54
YOM1972
ConditionGood condition,under power
PhotoSee Photo
Capacity: 800 ton,
Stroke: 600 mm,
Cushion stroke: 300 mm,
Shut height: 950 mm,
Adjustment: 300 mm,
SPM:16-20-24
Bolster thickness: 212.5 mm,
Quantity: 2 nos
Equipped with:
T-slotted ram,
Air clutch and brake
Air counterbalances,
Light curtains.
 
  406
IDMA29605
MakeWMW Erfurt,Germany
ModelPKZZ-500TS
YOM
ConditionGood Condition
PhotoSee Photo
Centers of pressure: 2,
Slide's pressure: 500 tones,
Slide's stroke: 500 mm,
Distance between bolster and slide: 1100 mm,
Distance between columns: 2800 mm,
Slide area: 2800 x 1700 mm,
Main motor: 75 kW.
 
  407
IDMA29588
MakeAIDA,Japan
Model
YOM
ConditionVery good condition
PhotoSee Photo
Capacity: 250 ton,
Stroke: 200 mm,
SPM: 40-75,
Die height: 500 mm,
Adjust: 100 mm,
Bolster: 1850 x 1100 mm,
Slide: 1850 x 900 mm,
Main motor: 45 Kw,
Uncoiler Leveler Feeder
Make : Sonoruka
Sheet width: 400 mm,
Sheet thickness: 6.0 mm,
Coil external diameter: 1200 mm,
Coil weight: 3000 kgs,
Coil inernal diameter: 508 mm,
Main motor: 75 Kw.
 
  408
IDMA29574
MakeKomatsu
ModelE4F1000x600
YOM1981.02
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 ton,
Stroke length: 990 mm,
Die height: 400~579 mm,
Slide: 178 mm,
SPM: 9~15,
Upright between: 3500 mm,
Bolster: 3400 x 2000 x 1550 mm,
Flor to bed surface: 10000 mm,
Floor to bolster: 750 mm,
Level feeder attached,
Coiler attached,
Die coiler attached
 
  409
IDMA29567
MakeBliss
ModelSE4-800
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Stroke length: 450 mm,
Strokes per min: 610,
Slide adjustment max-min: 780-480 mm,
Die height: 630 mm,
Table area: 2755 x 1680 x 260 mm,
table surface height: 670 mm,
Position of anchorbolts: 3000 x 4500 mm,
Floor space required: 2700 x 4320 mm,
Overall measurement: 2700 x 4320 mm,
Press overall height; 6460 mm,
Motor: 100/75 HP,
Required air pressure: 5 Kg,
2 bolster side moving no die custion
 
  410
IDMA29561
MakeWasino,Japan
ModelPUX15
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 15 ton,
Ram Stroke : 60 mm,
Stroke per minute : 120.
Die Height : 200 mm.
 
  411
IDMA29560
MakeWasino,Japan
ModelPUX25
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 25 ton,
Ram Stroke : 80 mm,
Stroke per minute : 120.
Die Height : 220 mm.
 
  412
IDMA29559
MakeWasino,Japan
ModelPUX80
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 80 ton,
Ram Stroke : 180 mm,
Stroke per minute : 50.
Die Height : 350 mm.
DC.
 
  413
IDMA29558
MakeWasino,Japan
ModelPUX80
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 80 ton,
Ram Stroke : 180 mm,
Stroke per minute : 50.
Die Height : 350 mm.
 
  414
IDMA29557
MakeWasino,Japan
ModelPUX80
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 80 ton,
Ram Stroke : 180 mm,
Stroke per minute : 50.
Die Height : 350 mm.
 
  415
IDMA29556
MakeWasino,Japan
ModelPUX80
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 80 ton,
Ram Stroke : 180 mm,
Stroke per minute : 50.
Die Height : 350 mm.
 
  416
IDMA29555
MakeWasino,Japan
ModelPUX80
YOM1987
ConditionGood Condition
PhotoSee Photo
Capacity : 80 ton,
Ram Stroke : 180 mm,
Stroke per minute : 50.
Die Height : 350 mm.
DC.
 
  417
IDMA29554
MakeWasino,Japan
ModelPUX150
YOM1988 / 1989
ConditionGood Condition
PhotoSee Photo
Capacity : 150 ton,
Ram Stroke : 225 mm,
Stroke per minute : 25~45.
Die Height : 30 DC.
Make : Orii.
NC Leveler feeder LCC04HB1HAS-DTS.
 
  418
IDMA29543
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 100 Ton.
 
  419
IDMA29540
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 160 Ton,
Stroke : 130 mm,
Stroke per minute : 40-80,
Die height : 325 mm,
Adjustment : 100 mm,
Table size : 2020 x 760 mm,
Slide size : 1500 x 580 mm.
 
  420
IDMA29539
MakeOKK
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 100 Ton,
Stroke : 170 mm,
Stroke per minute : 45,
Die height : 360 mm,
Adjustment : 85 mm,
Table size : 620 x 1060 mm,
Slide size : 500 x 620 mm.
 
  421
IDMA29538
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 100 Ton,
Stroke : 170 mm,
Stroke per minute : 50,
Die height : 550 mm,
Adjustment : 550 mm.
 
  422
IDMA29537
MakeSuzuki (Kongo)
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 55 Ton,
Table size : 800 x 450 mm,
 
  423
IDMA29536
MakeEndo
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 Ton,
Stroke : 150 mm,
Die height : 350 mm,
Table size : 930 x 900 mm,
Slide size : 750 x 850 mm.
 
  424
IDMA29521
MakeWMW Erfurt,Germany
ModelPE4-HH-500-FS
YOM1996
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Table size: 3500 x 1800 mm,
Control: 2 nos
 
  425
IDMA29520
MakeWMW Erfurt,Germany
ModelPE2-UE-800FS
YOM1989
ConditionVery good condition
PhotoSee Photo
Capacity: 800
Table size: 1800 h 1400 mm,
Quantity: 3 nos
 
  426
IDMA29519
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 110 ton,
Stroke length : 150 mm,
Stroke per minute : 32~65 S.P.M,
Slide area : 600 x 450 mm,
Bolster area : 1100 x 700 x 100 mm,
Slide adjustment : 100 mm,
Die height : 380 mm
 
  427
IDMA29518
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 60 ton
 
  428
IDMA29517
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 45 ton
 
  429
IDMA29516
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 35 ton
 
  430
IDMA29515
MakeAmada,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 60 ton
 
  431
IDMA29514
MakeAmada,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 45 ton
 
  432
IDMA29513
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:110 ton,
Stroke length:180 mm,
Stroke per minute:50 spm,
Slide area:600 x 520 mm,
Bolster area:1080 x 680 mm,
Slide adjustment:90 mm,
Die height:350 mm,
Motor power:7.5 kW,
 
  433
IDMA29500
MakeAmbrogio Galli
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 80 tons,
Stroke: 19-130 mm,
Stroke per minute: 55,
7,5 HP
 
  434
IDMA29495
MakeAmada,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 75 T,
Table : 810*560 mm,
Die high : 400 mm,
Stroke : 130 mm.
 
  435
IDMA29494
MakeWMW Erfurt,Germany
ModelPKZV(I)800FS
YOM1986
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Ram stroke:500 mm,
Number of ram strokes: 14 min-1,
Bed to bolster plate adjustment: 500 mm,
Shut height: 1700 mm,
Size of ram: 3950 x 2500 mm,
Gap size of table: 3520 x 1520 mm,
Cushion power on table: 1600 kN,
Tables ejector (cushion): 200 mm,
Main drive motor power: 90 kW,
Height above floor level approx: 8400 mm,
Weight approx: 230 ton,
Quantity: 4 nos.
 
  436
IDMA29463
MakeLegnani
ModelALF
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 40 ton.
 
  437
IDMA29462
MakeRoss
ModelUnused
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 50 Tons,
Stroke : 8-100 mm,
Stroke per minute : 95,
HP : 3.
 
  438
IDMA29461
MakeManzoni
ModelRAF
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 80 Tons,
Stroke : 80 mm,
Stroke per minute : 65,
HP : 7,5.
 
  439
IDMA29460
MakeOFB
ModelVFP35
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 35 Tons,
Stroke per minute : 130,
HP : 3.
 
  440
IDMA29459
MakeOFB
ModelVFP
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 35 Tons,
Stroke per minute : 130,
HP : 3.
 
  441
IDMA29453
MakeIMV,Italy
ModelGalli-P8F
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 80 ton,
Stroke : 100 mm,
Stroke per minute : 65,
7,5 HP
 
  442
IDMA29452
MakeCerini
ModelI1R
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 80 ton,
Stroke : 110 mm,
Stroke per minute : 60,
5.5 HP
 
  443
IDMA29451
MakeMossini
ModelTMF/S
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 40 Ton,
Stroke : 10-80 mm,
Stroke Per minute : 54-80,
Power : 3/4,5 HP,
With automatic feed.
 
  444
IDMA29450
MakeLegnani
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 40 ton.
 
  445
IDMA29449
MakeLegnani
ModelALF
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 40 ton.
 
  446
IDMA29448
MakeOTI
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 100 ton,
Stroke per minute : 70,
Slide adjustment : 100 mm,
Slide stroke : 0-120 mm,
Power : 5,5 Kw,
With automatic feed.
 
  447
IDMA29447
MakeManzoni
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 130 ton,
Stroke : 140 mm,
Stroke per minute : 25-75.
 
  448
IDMA29446
MakeBalconi
ModelMTRS/L 150
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 Tons,
HP : 15,
Stokes per minute : 32,
Stroke : 180 mm.
 
  449
IDMA29445
MakeRoche
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Table : 1000 x 1200 mm,
Ram : 1000 x 1000 mm,
Stroke : 500 mm.
 
  450
IDMA29444
MakeAmbrogio Galli
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 120 ton,
Stroke : 21 -140 mm,
Stroke per minute : 55,
10 HP
 
  451
IDMA29442
MakeAmada,Japan
ModelNCP80
YOM
ConditionBrand New
PhotoSee Photo
Capacity: 80 tons,
Stroke: 150 mm,
Stroke per minute/ Main motor: with variable 35~80 S.P.M./ VS 100 hP motor,
Rated tonnage point: 4.0 mm,
Die height: 330 mm,
Slide adjustment: 80 mm,
Slide area (L.R x F.B): 525 x 450 mm,
Bolster area (L.R x F.B): 1000 x 550 mm,
Bolster thickness: 100 mm,
Shank hole: 50 mm,
Die of power take of shaft: 100 x 100 L mm,
Hole of bed( L.R x F.B): 540 x 400 mm,
Hole of bolster (L.R x F.B): 360 x 180 mm,
Frame inside size: 540 mm,
Slide adjust device: 0.5 HP,
Outline dimensions (approximate): 1430 (W) x 2000 (D) x 3160 (H) mm,
Machine weight (approximate): 6500 kgs.
Quantity: 8 units
 
  452
IDMA29437
MakeVerson
ModelS1-1500-60-48-SSSC
YOM1973
ConditionGood Condition
PhotoSee Photo
Capacity: 1500 ton,
Bed size: 1500 x 1200 mm,
Stroke:450 mm,
Shut height: 950 mm,
Stroke per minute: 10.5,
Windows:725 x 700 mm,
87 ton cushion
Link 1100 Tonage monitor
Press commander light curtains,scrap exit conveyor
 
  453
IDMI6471
MakeDanly
ModelS2-600-108-48
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 600 ton,
Stroke : 600 mm,
Shut height : 1300 mm,
Adjustment : 400 mm,
LR - 2700 x FB - 1200 mm Bed & Slide Area,
Stroke per minute : 25 SPM,
Window : 925 mm,
Pit Required.
Omni Link Touch Screen Controls (9' x 4").
Qty : 2 nos.
 
  454
IDMA29410
MakeSmeral,Czech
ModelLEXN100C
YOM1980
ConditionGood Condition
PhotoSee Photo
Force : 100 t,
Flight : 270 mm,
Stroke : 10-125 mm,
Adjustment of the pusher : 90 mm,
The number of innings : 75 - 150 Hub/min,
Square table : 1000 x 640 mm,
Maxim. power consumption of the machine : 8 kW,
Dimensions of : 1.6 x 1.8 x 2.3 m,
Weight : 10.1 t.
 
  455
IDMA29387
MakeKomatsu
ModelE2G300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 250 mm,
Stroke per minute : 20 - 60,
Bolster : 2500 x 1000 mm,
Slide : 2500 x 1000 mm,
Die Height : 800 mm,
Adjust : 200 mm,
Side Opening : 940 mm.
 
  456
IDMA29375
MakeWMW Erfurt,Germany
ModelPKZVI800
YOM1983
ConditionGood Condition
PhotoSee Photo
Capacity : 800 ton,
Table size : 4000 mm X 2500 mm,
Distance between columns : 4000 mm,
Ram size : 3950 mm X 2500 mm,
Ram stroke : 500 mm,
Ram adjustment : 500 mm,
Strokes per minute : 14,
Shut height : 1175 mm,
Cushion capacity : 160 ton,
Cushion travel : 200 mm,
Press weight : 210 ton.
Front moving bolster.
Die cushion.
 
  457
IDMA29365
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Stroke: 800 mm,
SPM: 12 - 22.
Bolster: 3000 x 1300 mm,
Slide: 3000 x 1200 mm,
Die Height: 840 mm,
Adjust: 500 mm,
Die Cushion Capacity: 120 ton,
Die Cushion Stroke: 300 mm,
Cushion Pad: 2600 x 1200 mm.
 
  458
IDMA29335
MakeAIDA,Japan
ModelC2-16(2)
YOM
ConditionVery good condition
PhotoSee Photo
Capacity:160 tons,
Bolster: 2020 x 760 mm,
Shut Height: 450 mm,
Stroke: 200 mm,
SPM: 30-55,
C frame with transfer and leveler feeder
 
  459
IDMI6434
MakeBritish Clearing
Model
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Table size: 3350 x 2134 mm,
Stroke: 610 mm,
Daylight: 1679 mm,
Equipped with cushion
 
  460
IDMI6433
MakeWMW Erfurt,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 800 Tons,
Bed: 3100 x 1600 mm,
Stroke: 450 mm,
Shut: 1000 mm,
Adjustment: 450 mm,
Motorized SPM: 15
Windows: 600 mm,
Bolster: 250 mm,
Cushion: YES 150 mm CD TWIN DIE CUSHION
Main Motor: 100 HP,
Press Weight:150 Tons Approx.
 
  461
IDMI6432
MakeSEW
ModelSX160
YOM
ConditionGood Condition
PhotoSee Photo
Pneumatic Power Press.
C Frame.
Capacity : 160 ton.
 
  462
IDMA29300
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 350 mm,
Die Height : 700 mm,
Stroke per minute : 20 - 40,
Max Drawing Depth : 120 mm,
Adjust : 100 mm,
Bolster : 3000 x 1000 mm,
Slide : 3000 x 1000 mm,
Die Cushion : 5 ton,
Cushion Stroke : 240 mm,
Knockout : 1 ton,
Knockout Stroke : 120 mm,
Main Motor : 45 Kw,

This press has a 3000 mm wide moving bolster and a die cushion.
The press is supplied with an Orii uncoiler leveler feeder unit, with a capacity of 600 mm wide x 3.2 mm thick.
Make : Orii.
Type : Uncoiler Leveler Feeder Unit.
Coil Thickness : 0.3 - 3.2 mm,
Coil Width : 30 - 600 mm,
Coil Diameter (External) : 1400 mm,
Coil Diameter (Internal) : 508 mm.
 
  463
IDMA29286
MakeWMW Erfurt,Germany
ModelPKZZI500.2
YOM1992
ConditionVery good condition
PhotoSee Photo
Capacity: 500 ton,
Table size: 2800 x 1800 mm,
Ram size: 2800 x 1700 mm,
Daylight: 1220 mm,
Ram: 500 mm,
 
  464
IDMI6425
MakeSpiertz
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Bed Size :-
Front to Back : 1270 mm,
Let to Right : 1270 mm,
Day Light : 750 mm at BDC of Crank,
Crank stroke length : 500 mm,
Stroke per minute : 90,
Die Cushion : 8 mm,
Main motor : 45 kW,
Over all weight : 45.00 MT,
Pneumatic clutch brake PLC Siemens operated.
 
  465
IDMA29272
MakeAIDA,Japan
ModelFT-N30G
YOM1983
ConditionGood Condition
PhotoSee Photo
Capacity: 300
Stroke Length:350 mm,
Die Height: 700 mm,
Stage No: 10
SPM: 2 Axis: 20~40
3 Axis : 20~30
Max Drawing Deoth: 2 Axis: 120
3 Axis: 90
Slide Adjustment: 100 mm,
SL: 3000 X 1000 mm,
BL: 3000 X 1000 mm,
Main Motor: 45 kW,
Air Pressure: 5(8) (kgf/cm)

O.D.C Equipment Spec
Max Flame Weight: 8 (ft)
Max Pulling-put: 2600 mm,
Stopping Time: 273 (ms),
Max Stopping Time: Handling Type: 273
Beam Type :278
Overrun Detector: 12° ±3Ί

Transfer Equipment Spec
Feed Stroke: 300 mm,
Clamp Stroke: 120 mm,
Lift Stroke: 60 mm,
Feed Bar (In Clamp): 500 · 600 mm,
Feed Level: 400 mm,






CCS Level Feed
Code: LCC06HECAX,
Stock Thickness: 03 ~ 0.2 mm,
Stock Width: 30 ~ 600 mm
Coil Weight *MAX: 3,000 kgf
Line Speed Max: 20 m/mm
Power 3 Phase: 200 V 50 HZ,
Year: 1983 September
Serial No.:83-50

Leveler
Roller Length: 620 mm
Main Motor Capacity: 3.7 kW
Floor Stock Height: 1,140 mm
Main Body Weight: 2,500 kgf

Uncoiler
Coil Inner Diameter: 508 mm
Coil External Diameter: 1,400 mm
Main Shaft Motor Capacity: 1.5 KW
 
  466
IDMI6424
MakePlunger
Model
YOM1995
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Bed area : 2500 * 1250 mm,
Slide stroke : 350 mm,
Slide Base Area : 2500 * 1250 mm,
Holp No but can be provided,
Strokes Per Minute : 22,
Slide Adjustment : 460 mm,
Shut Height : 850 mm,
Operating Motor : 80 HP,
Rolling Bolster Yes , Side Ways,
Die Cushion Capacity : 80 Ton,
Die Cushion Stroke : 200 mm,
Lubrication : Automatic Greese Lubrication,
Clutch And Brake : Dry /Segmented Disc.
 
  467
IDMA29264
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 500 mm,
SPM : 15,
Bolster : 2800 x 1600 mm,
Slide : 2800 x 1600 mm,
Shut Height : 1000 mm,
Adjust : 500 mm,
Die Cushion Capacity : 100 tons,
Die Cushion Stroke : 250 mm,
Cushion Pad : 950 x 11480 mm x 2.
 
  468
IDMA29263
MakeKomatsu
ModelE2S300
YOM
ConditionGood Condition
PhotoSee Photo
H Frame Press.
Capacity : 300 ton,
Stroke : 600 mm,
Die Height : 1200 mm,
Bolster : 2000 x 1200 mm,
Die Cushion.
Moving Bolster : Left Moving x 2.
2 side moving bolsters,
With die cushions.
 
  469
IDMA29227
MakeUSI Clearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
Double Straight
Capacity: 270 Tons,
Table: 2500 X 1500 mm,
Stroke: 400 mm,
Adjustment ram : 310 mm
Height of tool mini 605 mm, maxi 915 mm
strokes per minute a little more than 20 Rpm
machine with 2 cushions 20 Tons in Table
 
  470
IDMA29197
MakeHitachi,Zosen
ModelS2-4000-300-78
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 4000 ton,
Stroke: 500 mm,
Die height: 1550 mm,
Speed: 8 spm,
Bolster: 7620 x 1980 x 350 mm,
Slide: 7620 x 1980 mm,
Adjustment slide: 500 mm,
Die cushion stroke: 250 mm,
Size: 10240-3100-14225 mm,
Cushion pad: 990 x 1080 mm,
Pad to bolster between distance: 10 mm,
Capacity of balancer: 19 ton,
No. of die cushion pad: 7
Die cushion capacity: 441 ( 63 x 7) ton,
Weight of machine approx: 300-400 ton.
 
  471
IDMA29178
MakeUSI Clearing
ModelS4-1000-180-90
YOMOverhaul 2007
ConditionGood Condition
PhotoSee Photo
PRESS DESIGN :-
Frame design : H-frame,
Openings in uprights : yes,
Number of con-rods / cylinders : 4,
Number of slide actions : 1,
Table cushion : yes.
PRESS FORCES :-
Total force (nominal) : 1000 ton,
PRESS TABLE :-
Table surface (left-right) : 4572 mm,
Table surface (front-back) : 2286 mm,
Thickness of bolster plate : 305 mm,
Number of T-slots : 15,
Distance between T-slots : 300 mm,
Distance between ejector holes : 150 mm,
SLIDE :-
Slide force : 1000 ton
Table surface (left-right) : 4572 mm,
Table surface (front-back) : 2282 mm,
Stroke : 864 mm,
Stroke rate (max.) : 15 /min,
SLIDE (MECHAN. PRESS) :-
Number of con-rods / cylinders : 4,
Slide adjustment : 356 mm,
Autom. Slide adjustment,
Hydraulic overload protection,
SLIDE EJECTOR / CUSHION :-
Stroke : 152 mm,
Force : 184 to
DIE CUSHION (TABLE CUSHION) :-
Number of cushions : 2,
Cushion force : 250 ton,
Stroke : 305 mm,
Working principle pneumatical,

TOOL ASSEMBLY DIMENSIONS :-
Shut height (stroke down, adjustment up), TDC : 1224 mm,
Distance between columns (H-frame) : 4620 mm,
Passline opening (free passage in side columns) : 1830 mm,
Free passage between side columns (height) : 1321 mm,
ELECTRICAL SPECIFICATIONS
Mains voltage : 400 V,
Mains frequency : 50 Hz,
DIMENSIONS / WEIGHTS :-
Total weight approx : 390000 kg
ATTACHMENTS (PRESSES) :-
Hydraulic overload protection yes,
Autom. Slide adjustment yes,
Press automation optional.
OPTIONS :-
o robot automation ABB,
o blank lubrication system KLASCHKA,
Controls : PLC SIEMENS S7.
 
  472
IDMA29158
MakeDanly
ModelS2-400-3050x1220
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Stroke: 662 mm,
Slide regulation: 610 mm,
Stroke/min: 10-20
Daylight: 1.982 mm,
Moving table dimensions: 3.050 x 1220 mm,
Lateral window: 1600 mm,
Main motor: 100 Kw,
PLC siemensL S7 400,
1 single press and each press complete of n.2 (two) lateral moving bolster
 
  473
IDMA29155
MakeGDC
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 350 ton,
The run: 300 mm,
Size plan: 1200 x 900 mm,
Opening between uprights: 1200 mm,
Cycles to the minute max: 22,
Sleight engine power: 2.2 kw,
Principal motor power: 18.5 kw.
 
  474
IDMA29154
MakeWMW Erfurt,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity: 400 ton,
Table size: 2800 x 2200 mm,
Cushion: 100 TM,
Table distance: 150 mm,
 
  475
IDMA29118
MakeAIDA,Japan
ModelPDA15H
YOM1976
ConditionGood Condition
PhotoSee Photo
Stroke per minute: 60-150,
Die height: 420 mm,
Stroke length: 1200 x 750 mm,
Adjustment: 100 mm,
Bed size: 1380 x 900 mm
 
  476
IDMA29108
MakeShimomura
ModelDCLP400-25A
YOM1985
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 450 mm,
Die Height : 780 mm,
Stroke Per Minute : 20,
Bolster size : 2500 x 1500 mm.
With die cushion.
Qty : 2 nos.
 
  477
IDMA29096
MakeAIDA,Japan
ModelPDA15H
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 ton,
Slide stroke : 250 mm,
Strokes per min : 50~120,
Slide area L.R X F.B : 2000 x 600 mm.
 
  478
IDMA29095
MakeWeingarten
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 250 ton,
Dimensions of the table: 2.5 m by 1.2 m,
Press mass weight: 85 tons.
 
  479
IDMA29077
MakeKomatsu
ModelOBS200-5K3
YOM1997
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
Stroke per minute : 25-50,
Die height : 480 mm,
Electric adjustment : 120 mm,
Slide length : 850 x 650 mm,
Bolster length : 1450 x 840 x 190 mm,
Die Cushion,
DATE make NC Feeder /NCF-01-550OK(Sheet width MAX550・Thickness0.5-3.2・FFeed Roll Dia 95.6φ)
DATE make Leveler /LN9-550U(Sheet width MAX550・Sheet thickness 0.5-3.2・callibration eff. 1500mm2)
DATE make Uncoiler /RM5000-550
Coil weight 5000kg
Coil width Max550
Coil Internal dia 508φ
Coil external Dia 1400φ.
 
  480
IDMA29075
MakeDanly
ModelS4-1500-156-72
YOM1963
ConditionGood Condition
PhotoSee Photo
Capacity : 1500 ton.
Bolster : 3900 R-L x 1800 F-B
Bolster thickness : 300 mm,
Stroke : 900 mm,
Slide Adjustment : 400 mm,
Shut height SDAU :1725 mm,
SDAD : 1325 mm with 487.5 mm bolster,
Window : 1362.5 mm wide.
Stroke per minute : 21.
There are no cushions.
 
  481
IDMA29074
MakeA.Colombo
Model4-1500M
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity: 1500 ton,
Slide stroke: 160 mm,
Strokes X minute: 20-60 min,
Shut height: 1200 mm,
Slide adjustment: stroke: 80 mm,
Bed size: 2240 x 2100 mm,
Slide area: 2200 x 2000 mm,
Power of main motor: 120 KW,
Press weight about: 150 ton,
Manual strokes per minute: 4-10 MR,
Free window lateral: 800 mm,
Number of connecting roads: 4 ,
Mold height: 1020 mm.
 
  482
IDMA29073
MakeAIDA,Japan
ModelPDA80L
YOM1991
ConditionGood Condition
PhotoSee Photo
Machine capacity: 80 ton,
Slide stroke: 25 mm,
Slide stroke per minute: 160~400,
Die height: 300 mm,
Slide adjust: 50 mm,
Slide L.R x F.B: 800 x 450 mm,
Bolster L.R. x F.B.: 900 x 600 mm,
Voltage: 200 V
 
  483
IDMA29072
MakeManzoni
ModelT1500-4MR.CE
YOM2000
ConditionGood Condition
PhotoSee Photo
Capacity: 2000 ton,
Slide stroke: 300 mm,
Strokes X minute: 20-60 min,
Shut height: 900 mm,
Slide adjustment: stroke 160 mm,
Bed size: 2400 x 2200 mm,
Slide area: 2250 x 2200 mm,
Upright opening: 2500 x 2350 mm,
Power of main motor: 134 KW,
Press weight about: 236 ton,
Work thickness: 12 mm,
Manual strokes per minute: 4-10 MR,
Free window lateral: 1450 x 1200 mm,
 
  484
IDMA29068
MakeDanly
ModelS4-1600-160
YOM2009
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 ton
Stroke: 900 mm
Die Height: 1200 mm
Speed: 10-20 spm
Bolster: 3000 mm X 2000 mm X mm
Slide: 3000 mm X 2000 mm
Slide Adjustment Stroke: 450 mm
Die Cushion Capacity:160 ton
Die Cushion Stroke: 300 mm
Bolster Movement right/left movement
Main motor: 187.5 kW x 3 P
Die cushion pad: 2200 mm x 1300 mm
 
  485
IDMA29060
MakeAIDA,Japan
ModelPD20
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
Stroke per minute : 20,
Die Height : 650 mm,
Bolster : 2000 x 1200 mm,
Slide : 1830 x 1000 mm,
Adjust : 400 mm.
 
  486
IDMA29058
MakeOKK
ModelDCM200B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
Stroke Per Minute : 25,
Die Height : 600 mm,
Bolster : 1800 x 1200 mm,
Slide : 1650 x 1000 mm,
Adjust : 150 mm,
Die Cushion.
 
  487
IDMA29053
MakeTMP Voronezh Russia
ModelK3539
YOM1980
ConditionGood Condition
PhotoSee Photo
800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons
 
  488
IDMA29050
MakeWMW Erfurt,Germany
ModelPKZZIV500FS
YOM
ConditionGood Condition
PhotoSee Photo
Total capacity 500 t, Stroke 500 mm, Ram adjustment 500 mm, Shut height 1100 mm, Distance between columns 2800 mm, Table size 2800 x 1800 mm, Ram size 2800 x 1700 mm, Main motor 104 kW, Main voltage 380 V, Number of strokes 20 s.p.m., Height over floor approx. 7600 mm
 
  489
IDMA29013
MakeAIDA,Japan
ModelPS50(2)
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 150 mm,
Stroke per minute : 40,
Bolster : 1100 x 1200 mm,
Slide length : 1100 x 1100 mm,
Die Height : 650 mm,
Adjust : 140 mm.
 
  490
IDMA29012
MakeAIDA,Japan
Model
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity : 350 Ton,
Stroke per minute : 20,
Die height : 950 mm,
Adjust : 400 mm,
Slide stroke : 2500 x 1520 mm,
Bolster : 2500 x 1520 x 190 mm,
Die cushion stroke : 250 mm,
Cushion : 80 ton..
Qty : 2 nos.
 
  491
IDMA29011
MakeAIDA,Japan
ModelPD20
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 300 mm,
Stroke per minute : 18~34,
Die Height : 550 mm,
Adjust : 200 mm,
Slide length : 1830 x 1000 mm,
Bolster : 2000 x 1220 mm,
Die cushion stroke :250 mm.
Qty : 4 nos.
 
  492
IDMA29010
MakeNatori,Japan
Model
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity : 350 ton,
Stroke per minute : 20,
Die Height : 950 mm,
Adjust : 400 mm,
Slide length : 2500 x 1520 mm,
Bolster : 2500 x 1520 x 190 mm,
Die Cushion stroke : 250 mm,
Cushion : 80 ton,
Qty : 2 nos.
 
  493
IDMA29009
MakeAIDA,Japan
ModelSMX-L2-300M(2)
YOM1989
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 300 ton,
Ram Stroke : 46 mm,
Stroke Per minute : 15~30,
Die height : 675 mm,
Adjust : 200 mm,
Slide : 2450 x 1250 mm,
Bolster : 2450 x 1400 mm. (Column Type).
 
  494
IDMA29008
MakeAmada,Japan
ModelTPW300
YOM2005
ConditionGood Condition
PhotoSee Photo
C Frame Press.
W link press.
Capacity : 300 ton,
Stroke : 250 mm,
Stroke per minute : 20~40,
Die Height : 550 mm,
Adjust : 120 mm.
 
  495
IDMA29007
MakeAmada,Japan
ModelTPW200
YOM2006
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 200 ton,
Ram Stroke : 250 mm,
Stroke per minute : 22~45,
Die Height : 500 mm,
Adjust : 110 mm,
Slide length : 1850 x 650 mm,
Bolster : 2400 x 850 mm.
 
  496
IDMA29006
MakeAmada,Japan
ModelTPL200L
YOM1992
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Link Press.
Capacity : 200 ton,
Ram Stroke : 300 mm,
Stroke per minute : 25~40,
Die height : 460 mm,
Adjust : 110 mm,
Die Cushion.
 
  497
IDMA29005
MakeAIDA,Japan
ModelNC2-200(2)
YOM1994
ConditionGood Condition
PhotoSee Photo
C Frame Presses.
Capacity : 200 ton,
Ram Stroke : 250 mm,
Stroke per minute : 20~45,
Dia Height : 500 mm,
Adjust : 110 mm.
 
  498
IDMA29004
MakeAIDA,Japan
ModelNC1-200(2)
YOM1990
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 200 ton,
Stroke : 250 mm,
Stroke per minute : 25~45,
Die Height : 450 mm,
Adjust : 110 (Electric),
CB, CA.
 
  499
IDMA29003
MakeAIDA,Japan
ModelNC1-200(2)
YOM1987
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 200 ton,
Ram Stroke : 250 mm,
Stroke per minute : 25~45,
Die Height : 450 mm,
Adjust : 110 (Electric),
CB CA.
 
  500
IDMA29002
MakeKomatsu
ModelOBW250-3
YOM1996
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 250 ton,
Stroke : 300 mm,
Stroke per minute : 20~40,
Die Height : 450 mm,
Bolster : 2700 x 950 mm.
 
  501
IDMA29001
MakeKomatsu
ModelOBW200
YOM1988
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 200 ton,
Stroke : 250 mm,
Stroke per minute : 20~40,
Die Height : 500 mm,
Adjust : 120 (electr),
Bolster : 2400 x 850 x 160 mm,
Slide Length : 1850 x 650 mm.
 
  502
IDMA29000
MakeAmada,Japan
ModelTPW200
YOM1995
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 200 ton,
Ram Stroke : 250 mm,
Stroke per minute : 25~45,
Die Height : 500 mm,
Bolster : 2400 x 850 mm,
Slide length : 1850 x 650 mm,
Adjust : 110 mm. (Electric).
 
  503
IDMA28999
MakeAIDA,Japan
ModelNC2-25(2)A
YOM1984
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 250 ton,
Ram Stroke : 280 mm,
Stroke per minute : 20~35,
Dia Height : 550 mm,
Adjust : 120 mm,
Slide Length : 2100 x 700 mm,
Bolster : 3050 x 920 (pic hole),
VS, DC.
 
  504
IDMA28997
MakeAIDA,Japan
ModelC2-25(2)
YOM1977
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 250 ton,
Ram Stroke : 280 mm,
Stroke per minute : 20~30,
Die height : 550 mm,
Adjust : 120 mm,
Slide length : 2100 x 700 mm,
Bolster : 2700 x 920 mm (pic hole),
VS.
 
  505
IDMA28996
MakeWashino
ModelPUX200
YOM1984
ConditionGood Condition
PhotoSee Photo
C Frame Press.
Capacity : 200 ton,
Stroke : 300 mm,
Stroke per minute : 25-35.
Dia height : 500 mm,
Adjustment : 110 mm,
Slide length : 850 x 630 mm,
Bolster : 1450 x 850 mm, (pin hole),
VS, DC.
 
  506
IDMA28995
MakeAIDA,Japan
ModelNC2-200(2)
YOM1993
ConditionGood Condition
PhotoSee Photo
C Frame Presses.
Capacity : 200 ton,
Stroke : 250 mm,
Stroke per minute : 25-45 spm,
Die Height : 500 mm,
Adjustment : 110 mm,
Transfer Feeder.
 
  507
IDMA28983
MakeKomatsu
ModelE2Q500
YOM1989
ConditionGood Condition
PhotoSee Photo
S: 710,12~22 spm,
Die height; 1000 mm,
SL: 2500 x 1600 mm,
BL: 2500 x 1700,
Quantity: 4 nos.
 
  508
IDMA28982
MakeAIDA,Japan
ModelPD30
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 450 mm,
Stroke Per Minute : 25 spm,
Dia Height : 675 mm,
Bolster : 2100*1350 mm.
Qty : 5 nos.
 
  509
IDMA28981
MakeKomatsu
ModelE2G300
YOM1989
ConditionGood Condition
PhotoSee Photo
Die height: 840 mm,
BL: 2500 x 1500,
Table size: 2500 x 1500 mm,
S:450,15~25 spm,
Quantity: 3 nos
 
  510
IDMA28980
MakeKomatsu
ModelE2G400W
YOM1990
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Slide height : 450 mm,
Stroke per min : 15-30 mm,
Die height : 850 mm,
Die Adjustment : 400 mm,
Slide Length : 2500*1300 mm,
Bed : 2500*1290*190 (thickness).
 
  511
IDMA28979
MakeAmada,Japan
ModelPMX-L2-6000(1)-305-140
YOM2015
ConditionGood Condition
PhotoSee Photo
Capacity : 600 ton,
Slide height : 305,
Stroke per minute : 25-60,
Die Height : 700 mm,
Slide adjustment : 150 mm,
Table size : 3050 x 1400 mm.
Qty : 2 nos.
 
  512
IDMA28963
MakeKomatsu
ModelE2G300
YOM1985
ConditionVery good condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 450 mm,
Stroke per minute : 10 -20,
Die Height : 650 mm,
Bolster : 2100 x 1350 mm,
Slide : 1900 x 1200 mm,
Adjust : 200 mm.
 
  513
IDMA28957
MakeOKK
ModelDCM300B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 450 mm,
Stroke per minute : 18,
Die Height : 800 mm,
Bolster : 2130 x 1350 mm,
Slide : 1900 x 1200 mm,
Adjust : 200 mm,
Die Cushion : 50 ton,
Cushion stroke : 10 - 225 mm,
Pad : 1500 x 800 mm.
 
  514
IDMA28942
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 200 ton,
Stroke: 300 mm,
SPM: 36,
Die height:600 mm,
Bolster:2500 x 1200 mm,
Slide:2500 x 1100 mm,
Adjust: 200 mm.
 
  515
IDMA28930
MakeOKK
ModelDCM-300BIII
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 450 mm,
Stroke per minute : 18,
Die Height : 700 mm,
Bolster : 2150 x 1350 mm,
Slide : 1900 x 1200 mm,
Adjust : 200 mm,
Main motor : 30 Kw,
Die cushion : 50 ton,
Pad: 1 Pad
Pad Size:1500 x 860 mm
Cushion Stroke:225 mm
 
  516
IDMA28925
MakeAIDA,Japan
ModelPDM30
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 600 mm,
Stroke per minute : 14,
Die Height : 600 mm,
Bolster : 2130 x 1870 mm,
Slide: 1900 x 1200 mm,
Adjust : 200 mm,
Die Cushion : 50 ton,
Cushion stroke : 300 mm,
Pad : 810 x 880 x 2.
 
  517
IDMA28924
MakeRovetta,Italy
ModelSE2 400-2740X1520
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Bed size:2740 x 1520 mm,
Hydraulic overload,
Slide stroke:508 mm,
Stroke per min:20,
With moving bolster.
 
  518
IDMA28918
MakeHitachi
Model
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Capacity : 4000 ton,
Stroke : 500 mm,
Stroke per minute : 8,
Die Height : 1550 mm,
Bolster : 7620 x 1980 mm,
Adjust : 500 mm,
Cushion : 104.8 ton,
Cushion stroke : 250 mm.
 
  519
IDMA28894
MakeWeingarten
ModelVK1000.43.85
YOM
ConditionVery good condition,Under power
PhotoSee Photo
Capacity : 1000 Metric Tons / 1100 Tons,
Stroke Length : 825 mm,
Stroke Per Minute : 8 to 15 (Variable),
Bed size : 3.900 x 2.150 mm,
(4.175 mm between the uprights),
Shut height : 1.475 mm (Over bolster),
Adjustment :
350 mm,
Windows,
Cushions (bed and ram),
Siemens press controls
Qty : 3 nos.
 
  520
IDMA28893
MakeWMW Erfurt,Germany
ModelPKZV800
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 800 ton,
Ram stroke : 500 mm,
Number of ram stroke min : 10-20 spm,
Bed to bolster plate adjustment : 500 mm,
Shut height : 1350 mm,
Size of bed (moving) : 4000 x 2500 mm,
Size of ram : 3950 x 2500 mm,
Gap size of table : 3520 x 2500 mm,
Cushion power on table : 1600 kn,
Table ejector (cushion) : 200 mm,
Main drive motor power : 90 kW,
Height above floor level approx : 8400 mm,
Machine Weight : 220 ton.
 
  521
IDMA28889
MakeAIDA,Japan
ModelNC2-250
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:250 ton,
Stroke:170 mm,
SPM: 25-55,
Die height:550 mm,
Adjust:120 mm,
Slide:2100 x 700 mm,
Bolster:2700 x 760 mm,
Uncoiler leveler feeder unit:
Make: Orii,
Model: LCC06HPNAX,
Thickness:06-6.0 mm,
Width: 600 mm,
Coil internal:508 mm,
Coil external:1500 mm,
Coil weight:3000 kgs,
Including coil car:2700 x 760 mm.
 
  522
IDMA28883
MakeKomatsu
ModelOBS150
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:150 ton,
Bolster:1250 x 800 mm,
Slide:700 x 550 mm,
 
  523
IDMA28877
MakeShinohara
ModelPL2-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton,
Stroke:400 mm,
SPM:16,
Bolster:2200 x 1440 mm,
Slide:2200 x 1300 mm,
Die Height:850 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion:35 ton x 2,
Cushion stroke:210 mm,
Pad size:820 x 920 mm x 2
 
  524
IDMA28876
MakeShinohara
ModelPL2-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton,
Stroke:400 mm,
SPM:16,
Bolster:2200 x 1440 mm,
Slide:2200 x 1300 mm,
Die height:850 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion:28 ton x 2,
Cushion stroke:240 mm,
Pad size:820 x 920 mm x 2
 
  525
IDMA28875
MakeShinohara
ModelPL2-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton,
Stroke:400 ton,
SPM:16,
Bolster: 2200 x 1440 mm,
Slide:2200 x 1300 mm,
Die height:850 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion:28 ton x 2,
Cushion stroke:240 mm,
Pad size:820 x 920 mm x 2
 
  526
IDMA28874
MakeShinohara
ModelPL2-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton,
Stroke:400 mm,
SPM: 16,
Bolster:2200 x 1440 mm,
Slide:2200 x 1300 mm,
Die height:850 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion: 28 ton x 2,
Cushion stroke: 240 mm,
Pad size:820 x 920 x 2
 
  527
IDMA28873
MakeShinohara
ModelPL2-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton,
Stroke:400 ton,
SPM:16,
Bolster:2200 x 1440 mm,
Slide:2200 x 1300 mm,
Die height:850 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion:28 ton x 2,
Cushion stroke:240 mm,
Pad size:820 x 920 mm x 2
 
  528
IDMA28872
MakeShinohara
ModelPL2-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton,
Stroke:400 mm,
SPM: 16,
Bolster:2200 x 1440 mm,
Slide:2200 x 1300 mm,
Die height:850 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion:28 ton x 2,
Cushion stroke:240 mm,
Pad size:820 x 920 mm x 2
 
  529
IDMA28866
MakeShinohara
ModelPL2-300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:300 ton,
Stroke:400 mm,
SPM:18,
Bolster:2200 x 1440 mm,
Slide:2200 x 1300 mm,
Die height:700 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion:33 ton x 2,
Cushion stroke:20-210 mm,
Pad size:800 x 950 x 2 mm.
 
  530
IDMA28865
MakeShinohara
ModelPL-400-220
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:400 ton,
Stroke:400 mm,
SPM:16,
Bolster:2200 x 1400 mm,
Slide:2020 x 1300 mm,
Shut height:850 mm,
Adjust:200 mm,
Main motor:30 Kw,
Die cushion:28 ton x 2,
Cushion stroke:210 mm,
Pad size:820 x 920 mm x2
 
  531
IDMA28864
MakeShinohara
ModelDA30D
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Stroke:300 ton
SPM:24,
Bolster:2500 x 1500 mm,
Slide:2500 x 1400 mm,
Die height:600 mm,
Adjust:200 mm,
Main motor:22 Kw,
Die cushion:24 ton x 2,
Cushion stroke:160 mm,
Pad size:950 x 950 mm.
 
  532
IDMA28863
MakeAIDA,Japan
ModelPDC-ST400
YOM
ConditionGood Condition
PhotoSee Photo
Capacity:400 ton,
Stroke:450 mm,
SPM: 15,
Bolster:2130 x 1370 mm,
Slide: 2130 x 1370 mm,
Shut height:860 mm,
Adjust:200 mm,
Main motor:22 Kw,
Die cushion:45 ton,
Cushion stroke:230 mm,
Pad size:840 x 820 mm.
 
  533
IDMA28862
MakeAIDA,Japan
ModelD30
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Stroke: 350 mm,
SPM:15-30,
Bolster:2500 x 1300 mm,
Slide:2400 x 1200 mm,
Die height:700 mm,
Adjust:200 mm,
Main motor:37 Kw.
 
  534
IDMA28847
MakeAIDA,Japan
ModelC1-11(2)
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity:110 ton,
Stroke length:180 mm,
Stroke per minute:50 spm,
Slide area:600 x 520 mm,
Bolster area:1080 x 680 mm,
Slide adjustment:90 mm,
Die height:350 mm,
Motor power:7.5 kW,
Quantity: 2 nos
 
  535
IDMI6365
MakeVerson
ModelSC4-400-108-70
YOM1980
ConditionGood Condition
PhotoSee Photo
capacity:400 ton.
Bed area:2900 x 1750 mm,
Slide area:2900 x 1750 mm,
Stroke:600 mm,
Speed:20 spm,
Slide adjustment:150 mm,
Shut height:1250 mm,
Operating pressure:70 psl,
Cushion capacity:80 ton,
Cushion stroke:300 mm.
 
  536
IDMA28834
MakeAIDA,Japan
ModelC2-25
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity: 250 ton,
Stroke length: 170 mm,
Stroke per minute: 25~55 spm,
Slide area: 2100 x 700 mm,
Bolster area: 2700 x 920 mm,
Slide adjustment: 120 mm,
Die height: 605 mm,
Frame type: H,
Motor power: 22 kW,
Machine weight: 36 ton,
Dimension (LxWxH): 3.0 x3.2 x 4.6 mm
 
  537
IDMA28833
MakeAIDA,Japan
ModelC2-25
YOM
ConditionVery good condition
PhotoSee Photo
Capacity: 250 ton,
Stroke: 345 mm,
SPM: 20 - 32,
Die Height: 700 mm,
Adjust: 120 mm,
Slide: 2100 x 700 mm,
Bolster:2700 x 920 mm,

Uncoiler
Make:Aida
Model: ES3
Coil Width: 600 mm,
Coil Weight: 3000 kgs,

Transfer Feeder
Make: Aida
Model: TCV-5,
Feed Stroke: 300 mm,
Feed Stroke: 350 mm,
Feed Stroke: 400 mm,
Clamp Width: 350 mm,
Clamp Width: 400 mm,
Feed Bar Height: 360 mm
Number of stages:7. 6. 5.
SPM: 20 – 32
 
  538
IDMA28779
MakeWMW Erfurt,Germany
ModelPKZZI800
YOM
ConditionVery good condition
PhotoSee Photo
Capacity: 800 ton,
Number of strokes: 14 min-1,
Slide adjustment: 500 mm,
Stroke: 500 mm,
Shut height: 1050 mm,
Table size: 3150 x 1600 mm,
Ram size: 3100 x 1600 mm,
Cushion in table: 160 ton,
Cushion stroke: 200 mm,
Distance between columns: 3160 mm,
Dimensions of press: 600 x 3000 x 8000 mm,
Main motor: 90 kW,
Weight approx: 175 ton.
 
  539
IDMA28757
MakeFukui
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 450 mm,
SPM : 12,
Bolster : 2550 x 1520 mm,
Slide : 2500 x 1500 mm,
Shut Height : 1300 mm,
Adjust : 500 mm,
Die Cushion Capacity : 100 tons,
Die Cushion Stroke : 230 mm.
Press has a sliding bolster and a die cushion.
 
  540
IDMA28689
MakeWMW Erfurt,Germany
ModelPKZZIV315.1TS
YOM1979
ConditionGood Condition
PhotoSee Photo
Max capacity of slide : 315 tons,
Press stroke : 400 mm,
Close height between table and slide : 750 mm,
Table size : 2500 x 1400 mm,
Slide size : 2450 x 1400 mm,
Free running number : 25,
Cushion table capacity : 63 t,
Cushion stroke : 160 mm,
Main electric motor power : 55 kW,
Height above floor, approx. : 6000 mm,
Machine weight : 105 000 Kg.
 
  541
IDMA28682
MakeTMP Voronezh Russia
ModelKA4537
YOM1988
ConditionGood Condition
PhotoSee Photo
Nominal force : 500 tons,
Rated distance of slide above bottom : 12 mm,
Slide stroke : 630 mm,
Frequency of continuous slide strokes per minute : at least 24,
Max. frequency of single slide strokes per minute : 18,
Max. distance between bolster plate and slide in its lower position at upper position of adjustment : 1230 mm,
Adjustment size of distance between bolster plate and slide : 500 mm,
Table dimensions (bolster plate) :
-Left-to-right : 3150 mm,
-Front-to-back : 1800 mm,
Slide dimensions (working area) :
-Left-to-right : 3150 mm,
-Front-to-back : 1800 mm,
Height of moving table with bolster plate : 620 mm,
Thickness of bolster plate : 220 mm,
Dimensions of side window in columns :
-Width : 1900 mm,
-Height : 1900 mm,
Ejector in slide :
-Number of bars : 2,
-Max. force on one bar : 80 kN,
-Stroke : 150 mm,
Pneumatic cushions in press table :
-Number of cushions : 2,
-Max. total force of 2 cushions : 800 kN,
-Full stroke of sliding bar : 300 mm,
-Working stroke of sliding bar : 150 mm,
-Sliding bar dimensions :
-Left-to-right : 1215 mm,
-Front-to-back : 1245 mm,
Working pressure of compressed air connected to the press : 0,45 MPa,
Total consumption of compressed air per stroke in a single mode : 30 dm³,
Max. weight of tool attached to slide : 14000 kg,
Max. total weight of tool moved by the moving table : 30000 kg,
Main drive electric motor power : 90 kW,
Press dimensions :-
Left-to-right : 5500 mm,
Front-to-back : 4550 mm,
Press height :
Above floor level : 7540 mm,
Total : 10930 mm,
Press weight : 170000 kg.
 
  542
IDMA28658
MakeInnocenti
ModelS4-900-180-96
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Capacity : 900 ton,
Ram Stroke : 940 mm,
Shut height : 1408 mm,
Ram adjustment : 762 mm,
No of stroke : 16 min,
Pneumatic cushion : 3,
Pneumatic cushion stroke : 305 mm,
Total cushion capacity : 96 ton,
Table size : 4500 x 2400 mm,
With moving bolster.
 
  543
IDMA28646
MakeRovetta,Italy
Model
YOM1979
ConditionGood Condition
PhotoSee Photo
Capacity : 800 ton,
Stroke : 508 mm,
Slide regulation : yes,
Stroke per min: 14-16 min,
Daylight : 1020 mm,
Table dimension : 3350 x 1700 mm,
Capacity : 138 ton,
Stroke (regulation) : from 104 mm to 254 mm.
 
  544
IDMA28645
MakeRovetta,Italy
Model
YOM1979
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 508 mm,
Slide regulation : yes,
Stroke per min: 16-18 min,
Daylight : 915 mm,
Table dimension : 2750 x 1600 mm,
Capacity : 80 ton,
Stroke (regulation) : from 104 mm to 254 mm.
 
  545
IDMA28632
MakeManzoni
Model2MR400.125
YOM1995
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Slide stroke : 125 mm,
Stroke per minute : 34-100 min,
Hydraulic overload,
Shut height : 700 mm,
Slide adjustment : 200 mm,
Bed size : 1600 x 1000 mm,
Slide area : 1500 x 1000 mm,
Upright opening : 800 mm,
Power of main motor : 48/16 kW,
Height above floor of table : 1100 mm,
Max height above floor : 4685 mm,
Overall dimensions : 2730 x 3150 x 4685 mm,
Press weight about : 47 ton,
PLC Siemens S7/300.
Pilz P2HZ5,
Static load : 470 Kn,
Dynamiv load : 540 Kn,
Specific load : 318 kn,
Electrical cabinet : 1600 x 600 x 2100 H.
 
  546
IDMA28604
MakeKobe,Japan
ModelS4-1500
YOM1964
ConditionGood Condition
PhotoSee Photo
Capacity: 1500 ton,
Stroke: 600 mm,
Die height: 1500 mm,
SPM: 15-18,
Slide adjustment: 650 mm,
Bolster size: 4200 x 2460 mm,
With front moving bolster,
With die cushion: 200 ton,
1 pad,2 cylinder,
Stroke 0-265 mm ( max.300 mm)
 
  547
IDMA28603
MakeWMW Erfurt,Germany
ModelPKZZIV500.IFS
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity : 500 t,
Table surface : 2800 x 1800 mm,
Ram surface : 2800 x 1700 mm,
Stroke : 500 mm,
Slide adjustment : 500 mm,
Shut height ca. : 1100 mm,
Main motor : 75 kW,
Number of strokes : 20 s.p.m.
Cushion in bed : 100 t,
Cushion stroke : 200 mm,
Height over floor ca. : 7600 mm,
Weight of the press ca. : 145 t.
Centres of pressure : 2.
 
  548
IDMA28600
MakeWMW Erfurt,Germany
ModelPKZVI1250FS
YOM1980 Installed 1981
ConditionGood Condition
PhotoSee Photo
Capacity : 1250 tons ,
Number of connecting points of ram : 4 ,
Drawing device capacity : 350 tons,
Ram stroke : 630 mm,
Ram adjustment : 630 mm,
Stroke per minute :11 SPM,
Table area : 4000 x 2500 mm,
Slide area : 4000 x 2500 mm,
Distance between columns : 4050 mm,
Shut height : 1250 mm,
Opening in bed : 3320 x 1540 mm,
Cushion capacity : 250 tons,
Cushion stroke : 0-250 mm,
Ejection force : 40 tons,
Overload protection : 40 tons,
Main drive : 132 kW,
Height above floor : 9700 mm,
Moving bolster,
Pneumatic cushion and overload protection.
 
  549
IDMA28580
MakeWMW Erfurt,Germany
ModelPKZZIV500FS
YOM1984
ConditionGood Condition
PhotoSee Photo
Total capacity 500 t, Stroke 500 mm, Ram adjustment 500 mm, Shut height 1100 mm, Distance between columns 2800 mm, Table size 2800 x 1800 mm, Ram size 2800 x 1700 mm, Main motor 104 kW, Main voltage 380 V, Number of strokes 20 s.p.m., Height over floor approx. 7600 mm. Double crank sheet metal stamping press is intended for cold forming of sheet specified for drawing, bending and cutting parts, for instance: coverings, door, parts of the car body and so on. with moving bolster.
Qty : 2 nos
 
  550
IDMA28572
MakeDanly
ModelS4-800-110-72
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Ram: 610 mm,
Adjustment: 510 mm,
Stroke minute: 0-18 Variable,
Bed size: 2800 x 1849 mm,
Weight: 160 kg.
With PLC Siemens.
Qty : 5 presses.
 
  551
IDMA28556
MakeWMW Erfurt,Germany
ModelPKZZI800
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Number of strokes: 14 min-1,
Slide adjustment: 500 mm,
Stroke: 500 mm,
Shut height: 1050 mm,
Table size: 3150 x 1600 mm,
Ram size: 3100 x 1600 mm,
Cushion in table: 160 ton,
Cushion stroke: 200 mm,
Distance between columns: 3160 mm,
Dimensions of press: 600 x 3000 x 8000 mm,
Main motor: 90 kW,
Weight approx: 175 ton.
 
  552
IDMA28505
MakeWMW Erfurt,Germany
ModelPKZZ250/2500
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 250 tons,
Ram stroke : 400 mm,
No. of strokes : 25/min.,
Ram adjustment : 120 mm,
Shut height : 720 mm,
Bed 2500 x 1400 mm,
Windows in bed : 2300 x 850 mm,
Ram : 2320 x 1250 mm,
Main drive motor : 32 kW.
 
  553
IDMA28496
MakeTMP Voronezh Russia
ModelK3047
YOM1991
ConditionGood Condition
PhotoSee Photo
Capacity: 5000 ton,
Stroke:750 mm,
Table size: 5400 x 2100 mm,
Day light sdau: 1572 mm,
Adjustment: 350 mm,
Lateral window: 1805 x 1805 mm,
Main motor power: 215 kw,
Machine weight: 800 kg
 
  554
IDMA28477
MakeTMP Voronezh Russia
ModelKA3539
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 800 tons,
Ram stroke : 320 mm,
Stroke per minute : 20 ram strokes/min,
Shut height : 900 mm,
Bed to ram adjustment stroke : 320 mm,
Bed dimensions : 2500 x 1600 mm,
Ram dimensions : 1400 x 1400 mm,
Bolster plate thickness : 250 mm,
Main drive motor power : 75 kW,
Overall dimensions : 4220 x 3500 x 8356 mm,
Mass : 97. 6 tons.
Qty : 2 nos.
 
  555
IDMA28466
MakeSchuler German
Model
YOM
Conditionoverhauled
PhotoSee Photo
Capacity : 500 ton,
N.4 connecting rods : 2250 x 1000 mm,
Width between shoulders : 4000 mm,
Table dimensions : 3700 x 2200 mm,
Stroke : 305 mm,
Regulation : 508 mm,
Stroke per minute : n 15 - 40,
Gap : 989 mm,
Moving bolster : H1000 mm,
Total Weight : 124 ton.
 
  556
IDMA28438
MakeKomatsu
Model
YOM1977
ConditionGood working condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 550 mm,
Die Height : 1100 mm,
Adjust : 550 mm,
Stroke per minute : 20,
Bolster : 3000 x 1850 mm,
Bolster : Moving x 2, side moving,
Slide : 3000 x 1850 mm,
Die Cushion (1 pad, 2 cylinders) : 150 ton,
Cushion Stroke : 250 mm,
Motor : 55 Kw.
 
  557
IDMA28407
MakeWMW Erfurt,Germany
ModelPKZZI800
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Number of strokes: 14 min-1,
Slide adjustment: 500 mm,
Stroke: 500 mm,
Shut height: 1050 mm,
Table size: 3150 x 1600 mm,
Ram size: 3100 x 1600 mm,
Cushion in table: 160 ton,
Cushion stroke: 200 mm,
Distance between columns: 3160 mm,
Dimensions of press: 600 x 3000 x 8000 mm,
Main motor: 90 kW,
Weight approx: 175 ton.
 
  558
IDMA28404
MakeTMP Voronezh Russia
ModelKA4537
YOM1987
ConditionGood working condition
PhotoSee Photo
Capacity : 500 tons,
Table size : 3200 x 1700 mm,
Ram stroke : 630 mm,
Shut height : 1850 mm,
Stroke per minute : 18 SPM,
Main motor : 100 kW,
Dimensions : 6305 x 5010 x 8380 mm,
Weight : 192.
 
  559
IDMA28374
MakeWMW Erfurt,Germany
ModelPKZZI315-2500
YOM
ConditionGood Condition
PhotoSee Photo
Max Capacity : 315 ton,
Table size : 2500 x 1400 mm,
Slide stroke : 400 mm,
Slide stroke per 1 min : 25,
Slide adjustment : 400 mm,
Slide area : 2450 x 1400 mm,
Distance between columns : 2500 mm,
Table height over floor : 480 mm,
Daylight : 1080 mm,
Shut height (stroke down-adjustment up): 900 mm,
Die cushion capacity : 63 ton,
Die cuschion stroke : 160 mm,
Voltage : 380 V,
Main motor power : 45 kW,
Total power requirement: 70 kW,
Press dimensions : 4300 x 2500 x 6000 mm,
Weight of the machine : 60 ton,
Quantity: 4 nos
 
  560
IDMA28356
MakeTMP Voronezh Russia
ModelK3044B
YOM
ConditionGood Condition
PhotoSee Photo
2500 tons, slide stroke 600 mm, ram strokes 11 continous/min, (can increase upto 16 in automatic), distance table and slide , when stroke down 1350 mm(can be increased for 500mmdue to length of tie bar), slide adjustability 500 mm, table area from 3960 x 2000 mm, slide area 4250 x 1800mm, bolster thickness 350mm, number of cushions in table 3, cushion travel in table 270mm, cushion effort and cushion ejection at P=5,2kg/cm2 100 tons, distance between columns 4300 mm, force of slide ejector 400kN, travel of slide ejector 150mm, mod of main motor AK-104-6M, main motor power 200kW, revolutions per min 975 RPM, overall dimensions 5685 x 8232 mm, height above floor level 9485 mm, general weight 437117 kgs
 
  561
IDMA28344
MakeTMP Voronezh Russia
ModelK3535A
YOM2000
ConditionGood working condition
PhotoSee Photo
315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons.
 
  562
IDMA28338
MakeManzoni
ModelUnused
YOM1998
ConditionGood Condition
PhotoSee Photo
Capacity : 315 t,
Stroke adjustable : 80 - 315 mm,
Ram adjustment : 0 - 200 mm,
Shut height (stroke down, adjustment up) : 750 mm,
Number of strokes : 20 - 60 spm,
Table surface : 2600 x 1250 mm,
Ram surface : 2600 x 1000 mm,
Dimensions : 4800 x 3440 x 6442 mm,
Machine weight ca. : 90 t.
 
  563
IDMA28334
MakeWMW Erfurt,Germany
ModelPKZZI800
YOM
ConditionGood condition,under power
PhotoSee Photo
Capacity : 800 t,
Number of strokes : 14 min-1,
Slide adjustment : 500 mm,
Stroke : 500 mm,
Shut height : 1050 mm,
Table size : 3150 x 1600 mm,
Ram size : 3100 x 1600 mm,
Cushion in table : 160 t,
Cushion stroke : 200 mm,
Distance between columns : 3160 mm,
Dimensions of press : 6000 x 3000 x 8000 mm,
Main motor : 90 kW,
Weight approx. : 175 t.
 
  564
IDMA28333
MakeArisa
ModelS2-250-200-100FS
YOM2007
ConditionVery good condition
PhotoSee Photo
Capacity : 250 t,
Stroke : 50 – 250 mm,
Ram adjustment : 200 mm,
Shut height (Stroke down, adjustment up) : 500 mm,
Table surface : 2000 x 1000 mm,
Ram surface : 2000 x 800 mm,
Hole in table : 1500 x 200 mm,
Number of strokes : 15 – 80 min-1,
Required power : 55 kW,
Dimension : 3990 x 1250 x 2000 mm,
Weight ca. : 39 t.
With SIEMENS S7 control,
 
  565
IDMA28332
MakeArisa
ModelS2-400-240-120FD
YOM2008
ConditionVery good condition
PhotoSee Photo
Capacity : 400 t,
Stroke : 400 mm,
Ram adjustment : 250 mm,
Shut height (stroke down, adjustment up) : 1000 mm,
Table surface : 2400 x 1200 mm,
Ram surface : 2400 x 1200 mm,
Hole in table : 1900 x 330 mm,
Number of strokes : 8 – 35 spm,
Required power : 90 kW,
Dimensions : 3990 x 3350 x 5700 mm,
Weight ca. : 65 t.
With SIEMENS S7 control,
 
  566
IDMA28331
MakeArisa
ModelS2-630-240-120LD
YOM2007
ConditionVery good condition
PhotoSee Photo
Capacity : 630 t,
Stroke : 450 mm,
Ram adjustment : 250 mm,
Shut height (Stroke down, adjustment up) : 1000 mm,
Table surface ca. : 2400 x 1200 mm,
Ram surface ca. : 2400 x 1200 mm,
Cushion in table ca. : 100 t,
Number of strokes : 10 – 24 min-1,
Required power : 79 kW,
Weight ca. : 135 t.
 
  567
IDMA28321
MakeWMW Erfurt,Germany
ModelPKZV800
YOM1974
ConditionGood Condition
PhotoSee Photo
Capacity : 800 ton,
Ram stroke : 500 mm,
Number of ram stroke min : 10-20 spm,
Bed to bolster plate adjustment : 500 mm,
Shut height : 1350 mm,
Size of bed (moving) : 4000 x 2500 mm,
Size of ram : 3950 x 2500 mm,
Gap size of table : 3520 x 2500 mm,
Cushion power on table : 1600 kn,
Table ejector (cushion) : 200 mm,
Main drive motor power : 90 kW,
Height above floor level approx : 8400 mm,
Machine Weight : 220 ton.
Qty : 3 nos.
 
  568
IDMA28318
MakeTMP Voronezh Russia
ModelKA4537
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 tons,
Table size: 3200 x 1700 mm,
Ram stroke: 630 mm,
Shut height: 1850 mm,
Stroke per minute: 18 SPM,
Main motor: 100 kW,
Dimensions: 6305 x 5010 x 8380 mm,
Weight: 192.
 
  569
IDMA28309
MakeTMP Voronezh Russia
ModelK3540
YOM1976
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 tons,
Ram stroke : 400 mm,
Stroke Per Minute : 20,
Shut height : 1060 mm,
Adjustment : 320 mm,
Ram dimensions : 3150 x 1700 mm,
Bolster plate thickness : 260 mm,
Height above floor level : 7830 mm,
Main motor power : 132 kW,
Dimensions : 5150 x 4700 mm,
Weight : 193 tons.
 
  570
IDMA28308
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1250 ton,
Stroke of the slide : 630 mm,
Adjustment of the slide : 630 mm,
Shut height (stroke down; adjustment up) : 1165 mm,
Table size : 4000 x 1800 mm,
Slide size : 3950 x 1800 mm,
Hole in the table : 3750 x 1300 mm,
Main motor power : 132 Kw,
No of strokes per min : 11,
Cushion capacity : 2500 kN,
Cushion stroke : 250 mm,
Height over the floor : appr .9500 mm,
Weight : 240 Ton.
 
  571
IDMA28249
MakeAIDA,Japan
ModelC1-20(1)
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 tons,
Stroke : 160 mm,
Stroke per minute : 35 - 65,
DH : 410 mm,
Bolster : 1420 x 840 mm.
 
  572
IDMA28218
MakeWeingarten
ModelVK500.34.85
YOM1974
ConditionGood Condition
PhotoSee Photo
Link drive presses.
Capacity : 500 ton,
No of stroke : 9-18,
Bed size L/R x F/B : 3100 x 1900 mm,
Stroke area L/R x F/B : 3100 x 1900 mm,
Shut height : 1200 mm,
Stroke of slide : 850 mm,
Slide adjustment : 350 mm,
Upper draw cushion force : 700 kn,
Upper draw cushion stroke : 150 mm,
Lower draw cushion force : 1400 kn,
Lower draw cushion stroke : 0-250 mm,
Machine size L x W x H : 5100 x 2900 x 8300 mm,
Voltage : 380/50 V/Hz,
Machine Weight : 145 ton.
Equipped with :-
Schuetz Hardware press control.
2 Die cart per press.
Qty : 4 nos.
 
  573
IDMA28214
MakeVerson Wilkins
ModelS4-400-108-60
YOM1960/Refurbished 1980
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Strokes: 400 mm,
Table: 2700 x 1500 mm,
Adjustment: 600 mm,
Max. shut height: 825 mm,
Min shut height: 225 mm,
Stroke per minute: 16,
Cushion: 100 ton,
Cushion stroke: 200 mm,
Quantity: 4 nos.
 
  574
IDMA28212
MakeFMI Mecfond
ModelS4-12000-3-1500-T2
YOM1983
ConditionGood Condition
PhotoSee Photo
Capacity : 1200 ton,
Ram stroke : 600 mm,
Ram adjustment : 15 mm,
Shut height (stroke down, adjustment up) : 900 mm,
Table surface ca. : 3000 x 1800 mm,
Ram surface ca. : 3000 x 1800 mm,
Strokes per minute : 4 – 12 spm,
Cushion in table : 112 t,
Cushion stroke : 100 mm,
Weight ca. : 190 t.
2 moving bolster front to back.
 
  575
IDMA28203
MakeErfurt
ModelPEZZ400/1600x1250
YOM1987
ConditionGood working condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 200 mm,
Stroke per minute : 32,
Adjustment : 160 mm,
With distance to lower dead point : 8.35 mm,
Force : 150 ton,
With distance to lower dead point : 80 mm.
 
  576
IDMA28158
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM1984
Conditionworking condition ,under power
PhotoSee Photo
Capacity : 1250 ton,
Stroke of the slide : 630 mm,
Adjustment of the slide : 630 mm,
Shut height (stroke down; adjustment up) : 1165 mm,
Table size : 4000 x 1800 mm,
Slide size : 3950 x 1800 mm,
Hole in the table : 3750 x 1300 mm,
Main motor power : 132 Kw,
No of strokes per min : 11,
Cushion capacity : 2500 kN,
Cushion stroke : 250 mm,
Height over the floor : appr .9500 mm,
Weight : 240 Ton.
 
  577
IDMA28113
MakeLeinhaas
ModelDDP4-All-160K
YOM1992
ConditionGood Condition
PhotoSee Photo
Hydromechanical Press
Capacity: 160 ton,
Press Table
table surface (left-right): 1100 mm,
table surface (front-back): 700 mm,
Ram
table surface (left-right): 900 mm,
table surface (front-back): 500 mm,
stroke: 100 mm,
stroke rate (max): 100 /min,
Ram (mechan.press)
ram adjustment: 100 mm,
stroke min: 3 mm,
stroke max: 100 mm,
stroke rate (min): 17/min,
stroke rate (max): 100/min,
Tool Assembly Dimensions
shut height (stroke down,adjustment up),TDC: 400 mm,
Strip Feeder
feeder type: roll feeder,
sheet width max: 500 mm,
sheet thickness max: 4 mm,
feeding step min: 0.1 mm,
feeding step max: 6500 mm,
Electrical Specifications
total power consumption: 45 kw,
Dimensions/Weights
space requirement length: 1800 mm,
space requirement width: 1800 mm,
total height: 3700 mm,
total weight approx: 12000 kg.
 
  578
IDMA28108
MakeTMP Voronezh Russia
ModelKB3537
YOM1983
ConditionGood Condition
PhotoSee Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
 
  579
IDMA28093
MakeKomatsu
ModelOBS110A
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity : 110 ton,
Stroke length : 150 mm,
Stroke per minute : 32~65 S.P.M,
Slide area : 600 x 450 mm,
Bolster area : 1100 x 700 x 100 mm,
Slide adjustment : 100 mm,
Die height : 380 mm,
Frame type : C,
Material of frame : Steel,
Accessories : Uncoiler, Straighter and Feeder.
 
  580
IDMA28075
MakeErfurt
ModelPKZVI800FS
YOM1986
ConditionGood Condition
PhotoSee Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton
 
  581
IDMA28068
MakeClearing Innocenti
ModelS2-400-108-60
YOM1970
ConditionGood working condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 610 mm,
Adjustment : 305 mm,
Stroke per min : 20,
Daylight stroke down adj up : 1018 mm,
Cushion stroke : 203 mm,
Cushion capacity : 70 ton,
Lateral moving bolster : 2743 x 1524 mm,
Weight of press : 125 ton,
Quantity : 2 Nos.
 
  582
IDMA28022
MakeRovetta,Italy
ModelSE2-300-1520-1220
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Slide stroke: 254 mm,
Connecting rods: 2,
Stroke per min: 30,
Slide height regulation: 254 mm,
Vertical gap S.D.A.U.: 660 mm,
Table dimensions: 1520 x 1220 mm,
Cushion pressure: 50 ton,
Cushion stroke: 127 mm,
main engine power: 30 kW,
Usefull working power: 1800 kgm
 
  583
IDMA27997
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM1984
ConditionGood Condition
PhotoSee Photo
Capacity : 12500 kN,
Stroke of the slide : 630 mm,
Adjustment of the slide : 630 mm,
Shut height (stroke down; adjustment up) : 1165 mm,
Table size : 4000 x 1800 mm,
Slide size : 3950 x 1800 mm,
Hole in the table : 3750 x 1300 mm,
Main motor power : 132 Kw,
No of strokes per min : 11,
Cushion capacity : 2500 kN,
Cushion stroke : 250 mm,
Height over the floor : appr .9500 mm,
Weight : 240 Ton.
 
  584
IDMA27995
MakeWMW Erfurt,Germany
ModelPKZVI800FS
YOM1986
ConditionGood Condition
PhotoSee Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton
 
  585
IDMA27982
MakeBliss
Model
YOM
ConditionVery good condition
PhotoSee Photo
Capacity: 1600 tons,
Bed: 3300 x 1500 mm,
Stroke: 750 mm,
Shut height: 1200 (SDAU),
Adjustment: 200 mm,
Strokes per minute: 13 (cont)/11 (single),
Windows,
Cushions,Tonnage monitor,
Brake monitor,
 
  586
IDMA27981
MakeDanly
ModelS4-1000-144-90QDC
YOM1971 / 1973
ConditionGood Condition
PhotoSee Photo
Capacity: 1000 ton,
Bed: 3600 x 2250 mm,
Stroke: 600 mm,
Shut height: 1500 mm,
Slide Adjustment: 500 mm,
Speed : 8-25 SPM,
Cushions 2 air cushions,
Cushion capacity 152 ton @ 100 psi,
Cushion stroke : 187.5 mm,
Equipped with :-
With Air cushions,
With Front moving bolster,
With Mew Xycom Automotion press controls installed in 2000's.
With Hydraulic Overload System
Qty : 2 Presses
 
  587
IDMA27980
MakeBliss
ModelS2-1600-132-60
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 1600 ton,
Bed: 3300 x 1500 mm,
Stroke: 750 mm,
Strokes per minute: 8,
Shut height: 825 mm (SDAU),
Adjustment: 300 mm,
 
  588
IDMA27967
MakeAmada,Japan
ModelTP110EX
YOM2012
ConditionGood Condition
PhotoSee Photo
Capacity: 1100 kN,
Stroke: 150 mm,
Slide dimensions: 600 x 500 mm,
Bolster dimensions: 1100 x 700 mm
 
  589
IDMA27934
MakeWMW Erfurt,Germany
ModelPKZVIII500.1FS
YOM1983/1984
ConditionExcellent condition,under power
PhotoSee Photo
500 tons, slide stroke 500 mm, strokes x minute 20 min, hydraulic overload, shut height 1200 mm, slide adjustment 400 mm, bed size 3150 x 2100 mm , moving bolster front to back, slide area 3150 x 2100 mm , upright opening 2200x1670 mm, bed cushion stroke 200 mm, power of main motor 75 kw, max height above floor 7500 mm, press weight about 129 ton
 
  590
IDMA27892
MakeOKK,Japan
ModelCL2-300
YOM1983
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke length : 450 mm,
Die Height : 850 mm,
Bolster size : 2300 x 1350 mm,
Cushion capacity x no of pad : 25 ton x 2.
 
  591
IDMA27856
MakeUSI Vickers
ModelS4-500-108-96
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Press Table:
Table surface(left-right): 2740 mm,
Table surface (front-back): 2400 mm,
Thickness of bolster plate: 190 mm,
Height above floor level: 1220 mm,
Number of T-slots: 15,
Distance between T-slots: 152 mm,
RAM:
Table surface (left-right): 2740 mm,
Table surface (front-back): 2400 mm,
Stroke: 305 mm,
Stroke rate (max.): 30 /min,
Ram (Mechan.Press)
Ram adjustment: 508mm,
Stroke rate (min): 14/min,
Stroke rate (max): 30/min,
Tool Assembly Dimensions
Shut height (stroke down,adjustment up),TDC: 1220 mm,
Passline opening (free passage in side columns): 1930 mm,
Free passage between side columns (height): 1000 mm,
Decoiler
Design: Twin reel,
Sheet width max: 1828 mm,
Sheet width (min): 300 mm,
Leveller Unit
Sheet width max: 1828 mm,
Sheet thickness max: 2.3 mm,
Sheet thickness max: 2 mm,
Feeding step max: 4000 mm,
Dimensions/Weights
Total weight approx: 200000 kg
 
  592
IDMA27854
MakeRovetta,Italy
ModelSC2-300-1520X1220-254
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 Ton,
Slide Stroke : 254 MM
Strokes x minute : 30 min,
Shut height : 660 mm,
Slide Adjustment : 254 mm,
Bed size : 1520 X 1220 mm,
Bed cushion stroke : 127 mm,
Bed cushion capacity : 50 Ton,
Power of main motor : 30 kW,
Work energy : 1800 Kgm.
 
  593
IDMA27852
MakeRovetta,Italy
ModelSC2-300-1220-1070
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Slide stroke : 400 mm,
Strokes X minute : 15 min,
Upright opening : 800 x 580 mm,
Bed Size : 1220 X 1070 mm,
Bed cushion stroke : 200 mm,
Bed cushion capacity : 50 ton,
Power of main motor : 40 kW.
 
  594
IDMA27851
MakeRovetta,Italy
ModelSC2-200-2130-1220-254
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Slide stroke : 254 mm,
Connecting rods:2
Strokes X minute : 30 min,
Shut height : 560 mm,
Slide adjustment : 203 mm,
Bed size : 2130 x 1220 mm,
Upright opening : 690 mm,
Bed cushion stroke : 127 mm,
Bed cushion capacity : 45 ton,
Tie rod nut hydraulic.
 
  595
IDMA27850
MakeRovetta,Italy
ModelSC2-200-1520x1070-254
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 Ton,
Slide Stroke : 254 MM
Strokes x minute : 30 min,
Connecting rods: 2
Slide Adjustment : 203 mm,
Bed size : 1520 X 1070 mm,
Upright opening : 690 mm,
Bed cushion stroke : 127 mm,
Bed cushion : 38 Ton.
 
  596
IDMA27849
MakeRovetta,Italy
ModelSC2-150-1520x1070
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 Ton,
Slide Stroke : 254 MM
Strokes x minute : 30 min,
Slide Adjustment : 203 mm,
Bed size : 1520 X 1070 mm,
Bed cushion stroke : 127 mm,
Bed cushion : 25 Ton,
Power of main motor : 20 KW.
 
  597
IDMA27843
MakeManzoni
Model
YOM1995
ConditionGood Condition
PhotoSee Photo
Capacity : 1250 Ton,
Number of conrods : 4,
Table dimension x-y : 2250 x 2200 mm,
Slide dimension (x-y) : 2250 x 2200 mm,
Stoke : 160 mm,
Adjustment slide : 100 mm,
Light at tdc : 860 mm,
Stoke type : Adjustable,
Stoke / min : 20 -60,
Lateral window dimension x-y : 1350 mm,
Features : Hydraulic overload,
Weight : 165 Ton.
 
  598
IDMA27828
MakeRadaelli
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 Ton,
Number of conrods : 4,
Table dimension x-y : 3000 x 2200 mm,
Slide dimension (x-y) : 3000 x 2200 mm,
Stoke : 500 mm,
Adjustment slide : 200 mm,
Light at tdc : 2000 mm,
Shut eight : 1500 mm,
Stoke type : Fixed,
Stoke / min. : 10,
Cushion power : 222 Ton,
Cushion stroke : 290 mm,
Weight : 175 Ton.
 
  599
IDMA27825
MakeSchuler German
ModelP2S2sq500
YOM
ConditionGood Condition
PhotoSee Photo
PRESS FORCES :-
Total force (nominal) : 500 ton,
PRESS TABLE :-
Table surface (left-right) : 2500 mm,
Table surface (front-back) : 1900 mm,
Thickness of bolster plate : 200 mm,
Height above floor level : 600 mm,
Number of T-slots : 8,
Distance between T-slots : 300 mm,
Distance between ejector holes : 150 mm,
RAM :-
Ram force : 500 ton,
Table surface (left-right) : 2600 mm,
Table surface (front-back) : 1800 mm,
Stroke : 500 mm,
Stroke rate (max.) : 12/min,
RAM (MECHAN. PRESS) :-
Ram adjustment : 350 mm,
SLIDE EJECTOR / CUSHION :-
Stroke : 125 mm,
Force : 1.4 ton,
DIE CUSHION (TABLE CUSHION) :-
Number of cushions 2,
Cushion force : 90 ton,
Stroke : 250 mm,
Cushion plate surface (left-right) : 1230 mm,
Cushion plate surface (front-back) : 1020 mm,
Working principle pneumatical,
Controlled yes,
TOOL ASSEMBLY DIMENSIONS :-
Shut height (stroke down, adjustment up) TDC : 1110 mm,
Distance between columns (H-frame) : 2640 mm,
DIMENSIONS / WEIGHTS :-
Height above floor level : 7850 mm,
Height under floor level : 4000 mm,
Two-point double eccentric press,
With sliding table.
PRESS DESIGN :-
Frame design : H-frame
Number of con-rods / cylinders : 2,
Number of slide actions : 1,
Slide ejectors / cushion : yes,
Table cushion : yes,
Opening in table no,
Moving bolster (quick die change system) : yes,
Moving bolster design : front-back.
 
  600
IDMI6190
MakeWMW Erfurt,Germany
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity: 500 ton,
Slide stroke: 500 mm,
No. of stroke: 12,
Area of bolster (R.L. x F.B.) 2800 x 1500 mm,
Thickness of bolster: 200,
Area of under face of slide (R.L. x F.B.): 2800 x 1500,
Shut height: 920 mm,
Slide adjustment: 250 mm,
main motor: 60 Hp,
Die cushion: 2 nos,
Cushion capacity: 60 ton,
Cushion stroke: 250 mm,
Area of cushion pad (R.L. x F.B.): 2580 x 1040
 
  601
IDMA27796
MakeAIDA,Japan
ModelNC2-200(2)
YOM1989
ConditionGood Condition
PhotoSee Photo
Press capacity : 200 tons,
Stroke length : 250 mm,
Stroke per minute : 25-45 spm,
Die height : 500 mm,
Slide adjustment : 110 mm,
Spindle drive motor : 22 kW.
Qty : 2 nos.
 
  602
IDMA27795
MakeAIDA,Japan
ModelC2-20(2)
YOM1978
ConditionGood Condition
PhotoSee Photo
Press capacity : 200 tons,
Stroke length : 250 mm,
Stroke per minute : 25-35 spm,
Die height : 500 mm,
Slide adjustment : 110 mm,
Slide area : 1850 mm X 650 mm,
Bolster area : 2420 mm X 840 mm.
Qty : 2 nos.
 
  603
IDMA27792
MakeVerson
ModelS4-600-3,2-2,0
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 630 ton,
Max adjustable stroke: 1100 mm,
Working speed: 8-20 str/min,
Passage between uprights: 3500 mm,
Distance between table -- ram: 1700 mm,
Dimension of the table: 3200 x 2000 mm,
Ram area: 3450 x 2000 mm,
Course adjustment: 500 mm,
Electric motor power : 130 kW,
Length L -- R: 4000 mm,
Depth F -- B: 7180 mm,
Height: 5500 mm above ground,
Weight: 170 ton,
 
  604
IDMA27772
MakeDanly
ModelS1-800-60-54
YOM1972
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Stroke: 600 mm,
Shut height: 950 mm,
Stroke per min: 16 to 25 spm,
Bolster 212.5 mm,
Cushion capacity: 60.9 tons,
Cushion stroke: 300 mm,
Cushion area: 825 x 1075 mm,
Equipped with:
Cushion,
Air clutch & Brake,
Air counterbalance,
Hydraulic overloads,
Light curtains.
 
  605
IDMA27760
MakeUSI Clearing
Model
YOM
ConditionGood Condition
PhotoSee Photo
4 Point Press,
Capacity : 1200 ton,
Ram Stroke : 250 mm,
Bed size : 2700 x 2100 mm,
Shut height : 1000 mm,
Bolster thickness : 200 mm,
Adjustment : 375 mm,
Stroke per minute : 13-40,
Windows : 1500 mm wide.
No Cushion.
No HOS.
 
  606
IDMA27743
MakeSchuler German
ModelE4-1500-5-0.8
YOM1971
ConditionGood Condition
PhotoSee Photo
Capacity: 1500 ton,
Table (Bed size): 5000 x 2700 x 300 mm,
Stroke: 800 mm,
Adjustment: 600 mm,
Cushion capacity: 225 ton,
Daylight S.D.A.U: 1600 mm,
Lateral window: 2000 x 1400 h mm,
Frontal opening: 5060 mm,
main motor power: 90 KW,
Quantity: 3 nos.
 
  607
IDMA27632
MakeBliss
ModelSE4-800-120-72
YOM
ConditionVery good condition
PhotoSee Photo
Capacity : 800 ton,
Ram Stroke : 500 mm,
Bed : 3000 x 1800 mm,
Shut height : 850 mm,
Adjustment : 400 mm,
Stroke per minute : 20,
Windows.
 
  608
IDMA27574
MakeWMW Erfurt,Germany
ModelPKZZI800
YOM
ConditionDisassembled
PhotoSee Photo
Capacity: 800 ton,
Cushion: 3170 x 1620 x 200 mm,
Hole in the table: 2910 x 1110 mm,
Main motor: 90 kW,
Press weight: 150000 kg.
 
  609
IDMA27548
MakeDanly
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity: 800 ton,
Number of controds: 4
Table dimensions X-Y: 2800 x 1800 mm,
Slide dimension (X-Y): 2800 x 1830 mm,
Stroke: 600 mm,
Adjustment slide: 500 mm,
Light at TDC (Shut height): 1720
Stroke type: adjustable,
Strokes/min: Da 14a 22
Lateral window dimensions (x-y): 1280 mm,
Cushion capacity : 110 x 2 = 220 Tons,
Cushion stroke : 200 mm
With new PLC system in 2010.
 
  610
IDMA27521
MakeWMW Erfurt,Germany
ModelPKZVI800FS
YOM1980
ConditionGood Condition
PhotoSee Photo
Nominal force : 800 tons,
Ram stroke : 500 mm,
Number of ram strokes min : 14,
Bed to bolster plate adjustment : 500 mm,
Shut height : 1700 mm,
Size of bed : 4000 x 2500 mm,
Size of ram : 3950 x 2500 mm,
Gap size of table : 3520 x 1520 mm,
Cushion's power on table : 1600 kN,
Tables ejector (cushion) : 200 mm,
Main drive motor power : 90 kW,
Height above floor level approx : 8400 mm,
Weight approx : 230 tons.
With Moving Bolster & HOS,
The cushion date are the follows:
Dimensions: 3500 x 1500 mm,
Capacity: 160/25 ton,
Stroke: 200 mm
Qty : 2 nos.
 
  611
IDMA27510
MakeRussian
ModelK3033
YOM1988
ConditionGood condition,under power
PhotoSee Photo
Capacity : 200 Ton,
Number of ram strokes per minute : 32,
Ram stroke : 320 mm,
Stroke path till its position where it develops nominal capacity : 8 mm,
Shut height : 590 mm,
Bolster plate-to-ram adjustment stroke : 200 mm,
Bolster plate thickness : 160 mm,
Upper ejector capacity : 20 ton,
Upper ejector stroke : 100 mm,
Cushion capacity : 20 ton,
Cushion stroke : 90 mm,
Motor power : 18 kW,
Press dimensions : 3380 x 2400 x 5000 mm,
Press Weight : 27500 kg.
 
  612
IDMA27509
MakeRussian
ModelKA3732
YOM1980
ConditionGood Condition
PhotoSee Photo
160 tons, Ram stroke 320 mm, Number of ram strokes per minute 24-48, Shut height 750mm, Bed-to-ram adjustment stroke 200mm,Bed dimensions 2000x1250 mm, Ram dimensions 1000x1000 mm, Bolster plate thickness 140 mm, Main drive motor power 22kW, Overall dimensions 3380 x 2400 x 5000 mm,Mass approx. 28 tons
 
  613
IDMA27504
MakeFukui
ModelMSC150
YOM1979
ConditionGood Condition
PhotoSee Photo
Capacity : 150 tons,
Bed size : 720 x 800 mm,
Ram Stroke : 300 mm,
Speed : 25-43 SPM,
Die Height : 455 mm.
 
  614
IDMA27498
MakeSchuler German
ModelPE4S125/1-25
YOM
ConditionGood Condition
PhotoSee Photo
4 Columns Eccentric Press.
Capacity: 125 ton,
Distance between columns; 1250 mm,
Distance between columns in feeding direction: 1100 mm,
Distance between columns transversally to feeds: 480 mm,
Fix stroke: 25 mm,
Distance between table and die: 360 mm,
Punch adjustment: 60 mm,
Table dimensions: 960 x 960 mm,
Die hole for tools: 65 mm,
Adjustable feeds from : 0 to 250 mm,
Adjustable working height from: 120 to 170 mm,
Adjustable strokes per minute from: 80 to 300,
main motor : 1500 rpm.15 Kw,
Adjustable die motors: 2800 rpm.0,8 Kw,
Approx.weight: 17.500 Kg.
Equipped with:
Winder, planner an feeder Shuler AHR 180/2
Inductor max. diameter 1200 mm,
Inductor width 180 mm,
Plate thickness 2 mm,
Dimensions 2000 x 1000 x,1800 mm,
Approx. weight 500 Kg.
 
  615
IDMA27496
MakeWMW Erfurt,Germany
ModelPEEI400
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 400 ton,
Stroke per minute: 32,
Adjustable stroke: 40-140 mm,
Throat: 400 mm,
Bed area: 1250 x 750 mm,
Ram area: 800 x 630 mm,
Slide adjustment: 125 mm,
Distance bed to slide: 450 mm,
Main power motor: 30 kW,
Machine dimensions; 3700 x 1600 x 3500 mm,
Machine weight: 25000 kg.
 
  616
IDMA27493
MakeWMW Erfurt,Germany
ModelPKZZIV315.1TS
YOM1988
ConditionGood Condition
PhotoSee Photo
Max. force of ram : 3150 kN,
Ram stroke : 400 mm,
Adjustment of ram : 400 mm,
Max. Shut height : 750 mm,
Distance between columns : 2500 mm,
Ram size (widthxdepth) : 2500 x 1400 mm,
Table size (widthxdepth) : 2500 x 1400 mm,
Bore in table : 2100 x 1000 mm,
Main motor power : 55 mm,
No. of strokes/min : 25
Capacity of die-cushion : 630 kN,
Travel of plae of cushion : 160 mm,
Approx. height over floor : 6650 mm.
 
  617
IDMA27492
MakeWMW Erfurt,Germany
ModelPKZZIV500.1FS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Sliders travel: 500 mm,
Strokes per minute: 20,
Sliders dimensions: 3840 x 2290 x 2360 mm,
Sliders weight: 17 300 kg,
Regulation of the distance between table and slider: 500 mm,
Max. open height of press: 1300 mm,
Max. open height of stamp: 1280 mm,
Press weight: 136 700 kg.
 
  618
IDMA27485
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM1975
Conditionexcellent working condition
PhotoSee Photo
Capacity : 12500 kN,
Stroke of the slide : 630 mm,
Adjustment of the slide : 630 mm,
Shut height (stroke down; adjustment up) : 1165 mm,
Table size : 4000 x 1800 mm,
Slide size : 3950 x 1800 mm,
Hole in the table : 3750 x 1300 mm,
Main motor power : 132 Kw,
No of strokes per min : 11,
Cushion capacity : 2500 kN,
Cushion stroke : 250 mm,
Height over the floor : appr .9500 mm,
Weight : 240 Ton.
 
  619
IDMA27459
MakeSchuler German
ModelM6
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 Ton,
Stroke : 850 mm,
Number of conrods 4,
Table dimensions X-Y : 3000 x 1800,
Slide dimensions (x-y) : 3000 x 1800,
Adjustment slide : 350 mm,
Light at tdc : 1600,
Strokes number :-
Strokes type adjustable,
Strokes/min Da 8 a 16,
Cushion Number : 2,
Power : 130 Ton,
Stroke : 250 mm,
Overall dimensions :-
Front : 5870,
Deep : 3500,
Height : 8150.
With link drive.
 
  620
IDMA27450
MakeWMW Erfurt,Germany
ModelPKZZIV500.1FS
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 500 t,
Table surface : 2800 x 1800 mm,
Ram surface : 2800 x 1700 mm,
Stroke : 500 mm,
Slide adjustment : 500 mm,
Shut height ca. : 1100 mm,
Main motor : 75 kW,
Number of strokes : 20 s.p.m.
Cushion in bed : 100 t,
Cushion stroke : 200 mm,
Height over floor ca. : 7600 mm,
Weight of the press ca. : 145 t.
 
  621
IDMA27448
MakeVerson
ModelLE4-800-120-60t
YOMNew 1996
ConditionGood Condition
PhotoSee Photo
Capacity: 800 ton,
Stroke: 750 mm,
Shut height: 1975 mm,
Adjustment: 50 mm,
FB bed area: 3000 x 1500 mm,
FB slide area: 3000 x 1500 mm,
Speed: 7-18 spm,
With link drive motion,
With air clutch and brake,
With air counterbalances,
With recirculating lube system,
With motorized adjustment,
T-slotted ram and bolster,
10" thick bolster plate,
66" wide windows,
Hydraulic tie rod nuts,
Hydraulic overloads,
Helm load guard trend series 4 load monitor,
panel mate operators controls,
Dual rolling bolster through the windows,
No of moving bolster : 2,
Moving bolster direction : left to right,
Motors and controls.
No of Presses 2.
 
  622
IDMA27443
MakeNiagara
ModelSE4-600-120-72
YOM
ConditionVery good condition,Under power
PhotoSee Photo
Capacity: 600 ton,
Bed : 3000 x 1800 mm,
Stroke: 800 mm,
Strokes per minute: 20,
Shut height: 1500 mm,
Adjustment; 400 mm,
Cushion capacity" 32 tons,
Cushion stroke: 200 mm,
Large windows,
with rolling bolster (left-to-right)
 
  623
IDMA27439
MakeWMW Erfurt,Germany
ModelPEEI250/400
YOM1966
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Throat : 400 mm,
Ram stroke : 36 – 126 mm,
Adjustment of ram : 10 mm,
Number of ram΄s strokes : 40 1/min
Output of main electromotor : 17 kW,
Shut height : 400 mm,
Thickness of table plate : 100 m,
Dimensions of table : 1000 x 760 mm,
Dimensions of ram : 630 x 500 mm,
Dimensions of machine (mm):
length : 1200,
width : 3200,
height : 3000,
Weight of machine : 14000 kg
 
  624
IDMA27438
MakeRavne,Germany
ModelKES630
YOM1976
ConditionGood Condition
PhotoSee Photo
Total force: 630 ton,
Press table:
Table surface (left-right): 1690 mm,
Table surface (front-back): 1200 mm,
Ram :
Stroke: 250 mm,
Stroke rate (max.): 42 /min.
 
  625
IDMA27408
MakeTMP Voronezh Russia
ModelKB3537
YOM1989
ConditionGood working condition
PhotoSee Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
Press with pneumatic die cushions.
 
  626
IDMA27404
MakeWMW Erfurt,Germany
ModelPKZZI500.1
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity : 500 tons,
Slide stroke : 500 mm,
Slide adjustment : 500 mm,
Shut height : 920 mm,
Bed area : 2800 x 1500 mm,
Slide area : 2750 x 1500 mm,
Opening in the bed : 2600 x 1060 mm,
Main motor power : 55 kW,
Cushion capacity in the bolster : 100 ton,
Cushion stroke : 200 mm,
Height above floor level : 7200 mm.
 
  627
IDMA27394
MakeAmbrogio Galli
Model30ML305-140-30
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 300 ton,
Ram stroke: 300 mm,
Table size: 3000 x 2000 mm,
 
  628
IDMA27390
MakeWMW Erfurt,Germany
ModelPKZZIII250.1FS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 250 ton,
Ram stroke: 400 mm,
Connecting rod: 2 nos,
Table size; 2500 x 1250 mm,
Adjustment of ram: 160 mm,
No. of stroke min: 25 c/min,
Lower blank holder: 90 ton,
Varie 8 nos
 
  629
IDMA27386
MakeRadaelli
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 500 ton,
Ram stroke: 500 mm,
Table size: 2500 x 2000 mm,
Lower blank holder: 200 ton,
Lower blank holder stroke: 220 mm
 
  630
IDMA27367
MakeManzoni
ModelT1250-4MR
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Capacity : 1250 ton,
Ram Stroke : 160 mm,
Ram size : 2250 x 2200 mm,
Table dimensions : 2400 x 2200 mm,
Adjustment : 100 mm,
Shut Height: 800 mm,
Variation adjustable,
Number of strokes/min : 20-60,
Lateral passage,
Size : 1350 mm,
Frontal light : 2500 mm,
Weight : 165 kgs
Press with 2 moving bolsters,
With Siemens PLC system,
No cushions.
With Hydraulic Overload System.
Number of conrods : 4
 
  631
IDMA27314
MakeRavne,Germany
Model
YOM1970-1980
ConditionVery good condition,Under power
PhotoSee Photo
Capacity: 500 ton,
Table size: 2800 x 1600 mm,
The lowest transition columns: 3000 mm,
Stroke: 400 mm,
Adjustment ram: 300 mm,
Stroke per min: 14,
Main engine: 37 kW,
Cushion stroke: 200 mm,
weight: 100 ton.
 
  632
IDMA27312
MakeVerson
ModelTS2-2500-240-54
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2500 ton,
Bed area : 6000 mm x 1350 mm,
Slide area : 6000 mm x 1800 mm,
Stroke : 550 mm,
Adjustment : 250 mm,
Shut Height : 1525 mm over bed SDAU,
Stroke per minute : 8-20,
Windows : 1900 mm wide,
Rolling bolster : 650 tall.
Equipped With :-
Air Clutch and Brake,
Air Counterbalances,
(6) Cushions-Capacity 20 Tons Each,
8 Point Gibbing,
Recirculating Lube System,
T-Slotted Ram and Bolster,
Rolling Boster F-B- 650 mm tall,
Hydraulic Overloads,
Hydraulic Tie Rod Nuts,
Recirculating Lube System,
Motors and Controls.
Qty : 2 nos.
 
  633
IDMA27311
MakeVerson
ModelSE4-1600-180-72
YOM
ConditionDisassembled
PhotoSee Photo
Capacity : 1600 Tons,
Bed Area : 4500 x 1800 mm,
Slide Area : 4500 x 1800 mm,
Stroke : 400 mm,
Adjustment : 250 mm,
Shut Height : 1800 mm over bed SDAU,
Strokes per Minute 15-30,
Windows : 1375 wide,
Bolster : 300 mm thick approx.
Overall Height : 7400 mm floor to highest point of press
Overall Weight : 645,000 # approx.
Equipped With :-
Air Clutch and Brake,
Air Counterbalances (2),
Knockouts in Slide Assembly,
Recirculating Lube System,
8 Point Gibbing,
T-Slotted Ram and Bolster,
Hydraulic Tie Rod Nuts,
Hydraulic Overloads,
Single Rolling Bolster (F-B),
Motors and Controls,
No Cushion.
Qty : 2 Nos
(Only 1 press with Moving Bolster)
 
  634
IDMA27309
MakeBenelli
ModelPE2M400-2500-1500-4
YOM1963/1995
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Slide stroke : 410 mm,
Stroke X minute 16 min,
Hydraulic overload,
Shut height : 850 mm,
Bed size : 2500 x 1500 mm,
Bed cushion stroke : 160 mm,
Bed cushion capacity : 95 ton (3 number),
Power of main motor : 50 kW,
Height above floor of table : 600 mm,
Max height above floor : 6105 mm,
Height below floor : 1290 mm,
Overall dimensions : 3810 x 2438 x 7395 mm,
Press weight about : 60 ton.
 
  635
IDMA27308
MakeAmbrogio Galli
Model25MTL205-120-20
YOM1994/2005
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Slide stroke : 200 mm,
Stroke X minute variable max 36 min,
Hydraulic overload,
Shut height : 850/1050 mm,
Slide adjustment : 120 mm,
Bed size : 2050 x 1200 mm,
Slide area : 2050 x 1000 mm,
Upright opening : 700 mm,
Power of main motor : 22+2 kW,
Height above floor of table : 800 mm,
Max height above floor : 4545 mm,
Press weight about : 30 ton,
Overall dimensions : 3630 x 1950 x 4545 mm,
PLC omron : C60H,
Recirculation lubrification oil,
Speed variation DC motor.
Loading arms mold.
 
  636
IDMA27288
MakeAIDA,Japan
ModelC1-15-2B
YOM1985
ConditionGood Condition
PhotoSee Photo
Press capacity : 150 ton,
Stroke length : 200 mm,
Stroke per minute : 30 - 55 S.P.M,
Slide area : 700 x 580 mm,
Bolster area : 1220 x 760 mm,
Slide adjustment : 100 mm,
Die height : 400 mm,
Material of frame : Steel,
Motor power : 11 Kw.
 
  637
IDMA27266
MakeWilkins & Mitchell
ModelD84-2-14
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke : 355 mm,
Working speed : 15 mn,
Distance between uprights : 2150 mm,
Table area : 2134 x 1067 mm,
Ram surface : 2134 x 1067 mm,
Distance between table and ram : 380/635 mm,
Motor : 30 cv,
Dimensions of machine : 3000 x 2000 x 6500 mm,
Weight of machine : 32000 kg.
Accessories :-
capacity : 40 ton,
stroke : 178 mm,
Bottom ejector,
 
  638
IDMA27243
MakeTMP Voronezh Russia
ModelK3535A
YOM
ConditionGood Condition
PhotoSee Photo
315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons.
 
  639
IDMA27242
MakeWMW Erfurt,Germany
ModelPKZVIII500/3150FS
YOM1973
ConditionGood Condition
PhotoSee Photo
Centres of pressure : 4,
Capacity : 500 tons,
Stroke of slider : 500 mm,
Adjustment of slider : 500 mm,
Max. daylight betwen bolster and slider SDAU : 1200 mm,
Distance between columns : 3200 mm,
Slider area : 3150 x 2100 mm,
Bed area : 3150 x 2100 mm,
Opening in bed : 2500 x 1600 mm,
Main motor power : 75 kW,
Cushion force in bed : 100 tons,
Stroke of cushion plate : 200 mm,
Height above the floor : 7600 mm,
Weight : 140 tons.
4 Crankshafts,
 
  640
IDMA27225
MakeWMW Erfurt,Germany
ModelPEEI400
YOM
ConditionGood Condition
PhotoSee Photo
Nominal pressure : 400 ton,
Strokes per minute : 32,
Adjustment stroke : 40-140 mm,
Throat : 400 mm,
Bed area : 1250 x 750 mm,
Ram area : 800 x 630 mm,
Slide adjustment : 125 mm,
Distance bed to slide : 450 mm,
Main power motor : 30 kW,
Machine dimensions : 3700 x 1600 x 3500 mm,
Machine weight : 25 ton.
 
  641
IDMA27223
MakeWMW Erfurt,Germany
ModelPKZZ1000/4000
YOM
ConditionGood condition,under power
PhotoSee Photo
Capacity : 1000 ton,
Stroke : 500 mm,
Adjustment : 210 mm,
Table surface : 4000 x 2200 mm,
Cushion in bed : 60 ton,
Minimum working height : 1065 mm,
Maximum working height : 1264 mm,
With moving bolster,
With die cushion,
 
  642
IDMA27129
MakeTMP Voronezh Russia
ModelK3540
YOM
ConditionGood Condition
PhotoSee Photo
1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons.
 
  643
IDMA27110
MakeWMW Erfurt,Germany
ModelPKZVIII500FS
YOM
ConditionGood Condition
PhotoSee Photo
Centres of pressure : 4,
Capacity : 500 tons,
Stroke of slider : 500 mm,
Adjustment of slider : 500 mm,
Max. daylight betwen bolster and slider SDAU : 1200 mm,
Distance between columns : 3200 mm,
Slider area : 3150 x 2100 mm,
Bed area : 3150 x 2100 mm,
Opening in bed : 2500 x 1600 mm,
Main motor power : 75 kW,
Cushion force in bed : 100 tons,
Stroke of cushion plate : 200 mm,
Height above the floor : 7600 mm,
Weight : 140 tons.
4 Crankshafts,
3 units.
 
  644
IDMA27006
MakeChin Fong,Taiwan
ModelG2-250
YOM2004
ConditionGood Condition
PhotoSee Photo
Press Capacity : 250 ton,
Stroke length : 280 mm,
Stroke per minute : 20 ~ 35 spm,
Die Height : 550 mm,
Slide adjustment : 120 mm,
Slide area : 2100 x 700 mm,
Bolster area : 2700 x 900 mm,
Frame type C,
Material of frame steel,
Weight of machine : 40.3 ton.
 
  645
IDMA26940
MakeWMW Erfurt,Germany
ModelPKZZIII250.1FS
YOM1982
Conditionworking condition ,under power
PhotoSee Photo
250 tons,stroke 160mm,no.of strokes 20-25 per min., moving (front -back) table dimensions 2500 x 1250mm, slide stroke 400mm, drawing depth 160mm, slide dimensions 2500 x 1250mm, table opening 2100 x 850mm, slide adjustment 250mm, shut height 800mm, ejectors stroke 160mm, tables cushion capacity 50 tons,distance between columns 2500mm,main motor power 45kW, Length 4650,Width 3600mm,Height 11250mm,Weight 64.5 Tons, Moving Table,2 x 20'''' and 2 x 40'''' opentops needed
 
  646
IDMA26932
MakeWMW Erfurt,Germany
ModelPKZVIII500FS
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Capacity : 500 tons,
Stroke of slider : 500 mm,
Adjustment of slider : 500 mm,
Max. daylight between bolster and slider SDAU : 1200 mm,
Distance between columns : 3200 mm,
Slider area : 3150 x 2100 mm,
Opening in bed : 2500 x 1600 mm,
Main motor power : 75 kW,
Cushion force in bed : 100 tons,
Stroke of cushion plate : 200 mm,
Height above the floor : 7600 mm,
Weight : 140 tons.
With moving table
 
  647
IDMA26928
MakeAizawa
ModelAC1-20N3
YOM1988
ConditionGood Condition
PhotoSee Photo
Press capacity : 200 ton,
Stroke length : 250 mm,
Stroke per minute : 25~45,
Die height : 450 mm,
Slide adjustment : 100 mm,
Slide area : 800 x 600 mm,
Bolster area : 1420 x 840 mm,
Spindle drive motor : 15 x 4p kW.
 
  648
IDMA26896
MakeKomatsu
ModelOBS80
YOM1978
ConditionGood working condition
PhotoSee Photo
Press capacity : 80 ton,
Stroke length : 130 mm,
Stroke per minute : 37~75,
Slide area : 550 x 400 mm,
Bolster area : 900 x 600 x 90 mm,
Slide adjustment : 80 mm,
Die height : 350 mm,
Frame type : C,
Material of frame : Steel,
Motor power : 7.5 kW,
Net weight : 6.0 ton,
Dimensions (L x W x H) : 1.9 x 1.5 x 3.1 mm
 
  649
IDMA26851
MakeAmada,Japan
ModelTP110
YOM1975
ConditionGood Condition
PhotoSee Photo
Capacity : 110 ton,
Stroke speed : 60 SPM,
Stroke length : 152 mm,
DH : 420 mm,
Slide adjustment : 100 mm,
With automatic adjustment slide.
 
  650
IDMI6031
MakeSmeral,Czech
Model
YOM
ConditionGood Condition
PhotoSee Photo
C frame press,
Capacity : 250 tons,
Bed size : 1120 x 780 mm,
Bed to ram : 550 mm,
bed bore : 350 mm,
Bed plate thickness : 100 mm,
Stroke per minute : 45,
Stroke length : 200 mm (adjustable).
 
  651
IDMA26792
MakeClearing
ModelFS4-180-100
YOM
ConditionGood condition,under power
PhotoSee Photo
Capacity : 600 ton,
Stroke : 925 mm,
Bed : 4500 x 2500 mm,
Stroke per minute : 8, (can be increased)
Shut height : 2000 mm, (can be modified to suit)
Adjustment : 150 mm.
 
  652
IDMA26790
MakeDanly
ModelS4-500-144-90
YOM
ConditionVery good condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 600 mm,
Bed size : 3600 x 2250 mm,
Shut height : 1737 mm,
Adjustment : 375 mm,
Stroke per minute : 14,
Windows : 600 x 1250 mm,
With cushion.
 
  653
IDMA26765
MakeFMI Mecfond
ModelS4-900.4572x2438
YOM1979
ConditionGood Condition
PhotoSee Photo
Capacity : 900 ton,
Stroke : 940 mm,
Adjustment : 762 mm,
No of strokes / min : 16 mm/min,
Daylight : 2228 mm,
Table dimensions : 4572 x 2438 mm,
Ram size : 4572 x 2438 mm,
Motor Power : 150 Hp,
Cushion : 96 ton,
Cushion stroke : 305 mm,
Overall dimensions : 7000 x 3200 x 8000 mm.
Weight : 260,000 Kg.
With HOS & Front Moving Bolster.
Variation adjustable,
With Hydraulic overload system.
Number of conrods 4.
Qty : 4 Presses.
 
  654
IDMA26710
MakeTMP Voronezh Russia
ModelKB3539
YOM1969
Condition
PhotoSee Photo
Capacty :800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion Capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 97600 kg
 
  655
IDMA26676
MakeFuji
ModelFSP1-2000
YOMNew in 2005
ConditionExcellent
PhotoSee Photo
CS Presses Capacity : 200 ton,
Controlled with NC,
Quantity : 5 units
 
  656
IDMI6012
MakeAutoma Japan
ModelAC1-15L
YOM
ConditionGood Condition
PhotoSee Photo
Capacity - 150 Tons,
Stroke - 200 mm,
Bed Size - 1250 x 700 mm,
RAM - 700x 500 mm,
Die Height - 450 mm,
Stroke per minute - 45,
Adjustment - 100 mm,
Accessories
Lube Tank, Air Filter,Main Motor, Clutch Filter,
2 Sensing Scale.
Other Details (Approx)
Power Required : 220V/15KVA / Phase : 3
Air Required : Bar
Working Space : F-B : 7’-6”, L-R : 5’, HT : 11’-6”
Net Weight : 15 Tons,
'C' frame press
 
  657
IDMI6011
MakeWasino,Japan
ModelPUX150L
YOM
ConditionGood Condition
PhotoSee Photo
Capacity - 150 Tons,
Stroke - 200 mm,
Bed - 1440 x 630 mm,
RAM- 670 x 500 mm,
Die Height - 400 mm,
Adjustment - 90 mm,
Stroke per minute - 40,
Accessories
Main Motor, Air Filter.
Other Details (Approx)
Power Required : 220V /12KVA / Phase : 3
Air Required : Bar
Working Space : F-B : 7’-7”, L-R : 4’-8”, HT : 12’-6”
Net Weight : 15 Tons
'C' frame press.
 
  658
IDMI6010
MakeYodagawa Japan
ModelPUX V-75C
YOM
ConditionGood Condition
PhotoSee Photo
Capacity -75 Tons,
Stroke - 20-130 mm,
Bed -1000 x 600 mm,
RAM -550 x 400 mm,
Die Height -500 mm,
Adjustment -75 mm,
Stroke per minute - 60,
Accessories
Lube Tank, Air Filter, Main Motor & Clutch Filter.
Other Details (Approx)
Power Required : 220V / 5.5KVA/ Phase : 3
Air Required : Bar
Working Space : F-B : 1800, L-R : 1200, HT : 3000
Net Weight : 7.5Tons,
'C' frame press.
 
  659
IDMI6009
MakeAIDA,Japan
ModelPC15(1)
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 150 tons,
Stroke : 125 mm,
Bed : 1240 x 750 mm,
Ram : 670 x 500 mm,
Die height : 422 mm,
Stroke per minute : 45,
Adjustment : 85 mm,
Accessories :
With die cushion & manually slide adjustment, air filter, main motor ,
Other details (approx)
Power required : 220 V/ 11KVA/phase : 3,
Air required : Bar,
Working space : F-B : 7'-3",LR : 4'-7", HT : 14"
Net weight : 15 tons.
'C' frame press
 
  660
IDMA26671
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM1984
ConditionGood Condition
PhotoSee Photo
1250 tons , table dimensions 4000 x 1800 mm ,max. drawing depth 250 mm, table opening 3750 x 1300 mm, ram dimensions 3950 x 1800 mm , shut height 1165 mm , stroke 630 mm , adjustment 630 mm , 11 SPM , main motor power 132 kW , distance between columns 4000 mm , ejector capacity 40 tons, drawing depth adjustment 250 mm, Total weight 215 tons, Cushion capacity : 250 Tons, Cushion stroke : 250 mm, Quantity : 2 nos.
 
  661
IDMA26595
MakeTMP Voronezh Russia
ModelKA3540
YOM1990
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table (left - right) dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. Press has 2 Connnecting rods.
 
  662
IDMA26507
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 500 mm,
Stroke per minute : 10-16,
Bolster : 2500 x 1700 mm,
Slide : 2500 x 1676 mm,
Shut height : 1400 mm,
Adjust : 500 mm,
Cushion : 100 tons,
Cushion stroke : 230 mm,
Cushion pad : 2000 x 1143 mm.
 
  663
IDMA26503
MakeKurimoto,Japanese
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 350 ton,
Stroke : 400 mm,
Die height : 1000 mm,
Adjust : 350 mm,
Stroke per minute : 18,
Bolster : 2800 x 1650 mm,
Slide : 2600 x 1400 mm,
Cushion : 100 tons,
Cushion stroke : 200 mm,
Cushion pad : 1215 x 1240 mm x 2.
 
  664
IDMA26474
MakeAIDA,Japan
ModelPDM25
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Stroke Length : 300 mm,
No of Strokes : 20 spm,
Die Height : 525 mm,
Bolster Size (RL x FB) : 1,830 x 1,220 mm,
Slide Size (RL x FB) : 1,650 x 1,000 mm,
Slide Adjustment : 125 mm,
Main Motor : 18.5 kW,
Knockout Capacity : 12.5 ton,
Knockout Stroke : 150 mm,
Bed Hole Size (RL x FB) : 680 x 680 x 2 mm,
Die Cushion,
Capacity : 40 ton (at 5kg/cm2 air pressure),
Effective Stroke Length : 150 mm,
Pad Size (RL x FB) : 650 x 830 x 2 mm.
 
  665
IDMA26456
MakeWMW Erfurt,Germany
ModelPKZVI800.1FS
YOM1974/1979
ConditionGood Condition
PhotoSee Photo
Nominal force : 800 tons,
Ram stroke : 500 mm,
Number of ram strokes min : 14,
Bed to bolster plate adjustment : 500 mm,
Shut height : 1700 mm,
Size of bed : 4000 x 2500 mm,
Size of ram : 3950 x 2500 mm,
Gap size of table : 3520 x 1520 mm,
Cushion's power on table : 1600 kN,
Tables ejector (cushion) : 200 mm,
Main drive motor power : 90 kW,
Height above floor level approx : 8400 mm,
Weight approx : 230 tons.
With Moving Bolster & HOS,
The cushion date are the follows:
Dimensions: 3500 x 1500 mm,
Capacity: 160/25 ton,
Stroke: 200 mm
 
  666
IDMA26455
MakeWMW Erfurt,Germany
ModelPKZVIII500.1FS
YOM
ConditionGood Condition
PhotoSee Photo
500 tons, slide stroke 500 mm, strokes x minute 20 min, hydraulic overload, shut height 1200 mm, slide adjustment 400 mm, bed size 3150 x 2100 mm , moving bolster front to back, slide area 3150 x 2100 mm , upright opening 2200x1670 mm, bed cushion stroke 200 mm, power of main motor 75 kw, max height above floor 7500 mm, press weight about 129 ton, Quantity : 2 nos.
 
  667
IDMA26445
MakeWMW Erfurt,Germany
ModelPKZZIV500.1FS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Bed : 2800 x 1800 mm,
Ram Stroke : 500 mm,
Ram stroke per min : 20,
Ram adjustment : 500 mm,
Shuth height : 1100 mm,
Qty : 2 nos.
 
  668
IDMA26440
MakeWMW Erfurt,Germany
ModelPKZZIV500.1TS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Bed : 2800 x 1800 mm,
Ram Stroke : 500 mm,
Ram stroke per minute : 20,
Ram adjustment : 500 mm,
Shuth height : 1100 mm.
 
  669
IDMA26312
MakeTMP Voronezh Russia
ModelKB3732A
YOM1987
ConditionGood working condition
PhotoSee Photo
Nominal force : 1600 kN,
Ram stroke : 320 mm,
Number of ram stroke per minute : 32 ,
Shut height : 750 mm,
Bed to ram adjustment stroke : 200 mm,
Bed dimensions : 2000 x 1250 mm,
Ram dimension : 1000 x 1000 mm,
Bolster plate thickness : 140 mm,
Main drive motor power : 22 kW,
Overall dimensions :
Floor space : 3380 x 2400 mm,
Height above floor level : 5000 mm,
Mass ton arrrox. : 28.0 tons.
 
  670
IDMA26256
MakeWMW Erfurt,Germany
ModelPKZZ500
YOM1977
ConditionGood Condition
PhotoSee Photo
Maximum force of slide 500 T,
Stroke of slide 500 mm,
Adjustability of slide 500 mm,
Max. daylight between bolster and slide, SDAU 1100 mm,
Width between columns 2800 mm,
Slide area (W x D)2800x1700 mm,
Bed area (W x D)2800x1800 mm,
Opening in bed (W x D) 2400x1250 mm,
Main motor power 75kW,
Idle stroke rate 20 per min,
Counter pressure of cushion in bed 100 T,
Stroke of cushion plate 200 mm,
Height above ground 7600 mm,
 
  671
IDMA26252
MakeYodogawa
ModelPDU600
YOM
ConditionGood condition,under power
PhotoSee Photo
Capacity : 600 tons,
Bolster : 1800 x 1000 mm,
Die height : 500 mm.
 
  672
IDMA26248
MakeFukui
ModelMDE500
YOM
ConditionVery good condition,Under power
PhotoSee Photo
Capacity : 500 tons,
Stroke : 510 mm,
Bolster : 2550 x 1520 mm,
Stroke per minute : 15,
Die height : 700 mm,
Adjustment : 500 mm,
Cushion : 50 ton x 2,
Stroke : 0-200 mm,
Pad : 1090 x 1090.
 
  673
IDMA26246
MakeToyo
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
Capacity : 800 ton,
Stroke : 300 mm,
Bolster : 1200 x 1100 mm,
Stroke per minute : 16 SPM,
Die Height : 650 mm.
 
  674
IDMA26238
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM1976
ConditionGood Condition
PhotoSee Photo
1250 tons , table dimensions 4000 x 1800 mm ,max. drawing depth 250 mm, table opening 3750 x 1300 mm, ram dimensions 3950 x 1800 mm , shut height 1165 mm , stroke 630 mm , adjustment 630 mm , 11 SPM , main motor power 132 kW , distance between columns 4000 mm , ejector capacity 40 tons, drawing depth adjustment 250 mm,weight 245 tons
 
  675
IDMA26237
MakeWMW Erfurt,Germany
ModelPKZZIII250.1FS
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 250 tons, No.of strokes 20-25 per min., moving (front -back) table : 2500 x 1250mm, slide stroke : 400mm, Ram Size : 2500 x 1250mm, Table opening : 2100 x 850mm, Slide adjustment 250mm, Shut height 800mm, Cushion stroke 160mm, Cushion capacity 50 tons, Distance between columns : 2500mm, Main motor power 45kW, Length 4650, Width 3600mm, Height 11250mm, Weight 62 Tons. Qty : 2 Nos
 
  676
IDMA26227
MakeClearing
ModelS2-500-144-48
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Table surface : 3700 x 1200 mm,
Ram travel : 610 mm,
Slide adjustment : 380 mm,
Max distance between table/ram : 1420 mm,
Lateral gap : 3759 mm.
 
  677
IDMA26226
MakeRaimondi
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 220 ton,
Table surface : 1200 x 800 mm,
Ram travel : 40-280 mm,
Stroke per minute : 15-30,
Max distance between table : 580 mm,
Power : 25 Hp,
Overall dimensions : 2100 x 1300 x 3200 mm,
Weight of machine : 13500 kg.
 
  678
IDMA26205
MakeTexer Erfurt
ModelSE2-350-2500-1400
YOM2002
ConditionVery good condition,Under power
PhotoSee Photo
Capacity : 350 ton,
Slide stroke : 400 mm,
Strokes X minute : 18 min,
Shut height : 750 mm,
Slide adjustment : 400 mm,
Bed size : 2500 x 1400 mm,
Slide area : 2450 x 1400 mm,
Upright opening : Yes,
Hydraulic overload : yes.
 
  679
IDMA26202
MakeWMW Erfurt,Germany
ModelPKZZIII315FS
YOM1982
ConditionGood Condition
PhotoSee Photo
315 tons , slide stroke 400 mm, die height 900 mm, 25 SPM , die space 900 mm, die space adjustment 400 mm, upright space 2500 mm, table dimensions 2500 x 1400 mm, ram dimensions 2500 x 1400 mm, main motor 55 kW, cushion capacity in table 63 tons , cushion slide stroke 160 mm, overall dimensions 4800 x 2700 x 6350 mm, total weight of press 60 tons.
 
  680
IDMA26201
MakeWMW Erfurt,Germany
ModelPE2U315FS
YOMend 80th
ConditionVery good condition
PhotoSee Photo
Capacity : 315 ton,
Ram stroke : 400 mm,
Moving table dimensions : 2500 x 1450 mm,
Ram adjustment : 320 mm,
Shut height 900 mm,
Stroke : 25 min,
Table cushion : 63 ton,
Cushion stroke : 160 mm,
Height above floor level : 7100 mm,
Quantity : 2 nos.
 
  681
IDMA26198
MakeOKK
ModelDCM300B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 300 tons,
Bolster : 2050 x 1500 mm,
Stroke : 200 mm,
Stroke per minute : 25,
Shut height : 600 mm,
Adjustment : 100 mm,
Level/Feeder
Capacity : 980 mm x 0.8 mm,
Capacity : 600 mm x 1.2 mm.
 
  682
IDMA26170
MakeWMW Erfurt,Germany
ModelPKZZIVTS315/2500
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 315 ton,
Width of working table area : 1400 mm,
Nominal forming force : 315 ton,
Ram stroke : 400 mm,
Number of strokes : 25/ min,
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2500 x 1400 mm,
Slide adjustment : 400 mm,
Shut height : 900 mm,
Passage between columns : 2550 mm,
Main motor : 85 kw,
Dimensions L x W x h : 5000 x 3500 x 6700 mm,
Machine weight : 75000 kg,
Length of working table area : 2500 mm.
 
  683
IDMA26167
MakeOKK,Japan
ModelDCM200B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 200 tons,
Ram Stroke : 300 mm,
Bolster : 1800 x 1200 mm,
Slide : 1650 x 1000 mm,
Stroke per minute : 25,
Die height : 600 mm,
Adjustment : 150 mm,
Main motor : 18.5 4P.
Qty : 2 nos.
 
  684
IDMA26122
MakeManzoni
ModelT1500-4MR.CE
YOM1997
ConditionGood Condition
PhotoSee Photo
Capacity : 1500 ton,
Slide stroke : 300 mm,
Strokes X minute :15-45 MI,
SHut height : 805 mm,
Slide adjustment : motorizzata 130 mm,
Bed size : 2400 x 2200 mm,
Slide area : 2250 x 2200 mm,
Upright opening : 2500 x 1350 mm,
Power of main motor : 134 KW,
Press weight about : 236 ton,
Manual strokes per minute : 4-10 NR,
Moving bolster front to back.
 
  685
IDMA26105
MakeAIDA,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 500 mm,
Bolster : 2200 x 1700 mm,
Stroke per minute : 12,
Die height : 850 mm,
Adjust : 240 mm,
Stroke : 165 mm,
Cushion : 150 ton.
 
  686
IDMA26103
MakeShinohara
ModelPL2-500-30
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 500 mm,
Bolster : 3000 x 1500 mm,
Stroke per minute : 14,
Die height : 1000 mm,
Adjust : 300 mm,
Stroke : 300 mm,
Cushion : 45 ton.
 
  687
IDMA26100
MakeShinohara
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 400 ton,
Stroke : 400 mm,
Bolster : 2200 x 1400 mm,
Stroke per minute : 16,
Shut height : 850 mm,
Adjust : 200 mm,
Stroke : 210 mm,
Cushion : 28 tons x 2.
 
  688
IDMA26091
MakeTMP Voronezh Russia
ModelK3044
YOM1980/1973
ConditionGood Condition
PhotoSee Photo
2500 tons, slide stroke 600 mm, ram strokes 11 continous/min, (can increase upto 16 in automatic), distance table and slide , when stroke down 1350 mm(can be increased for 500mmdue to length of tie bar), slide adjustability 500 mm, table area from 3960 x 2000 mm, slide area 4250 x 1800mm, bolster thickness 350mm, number of cushions in table 3, cushion travel in table 270mm, cushion effort and cushion ejection at P=5,2kg/cm2 100 tons, distance between columns 4300 mm, force of slide ejector 400kN, travel of slide ejector 150mm, mod of main motor AK-104-6M, main motor power 200kW, revolutions per min 975 RPM, overall dimensions 5685 x 8232 mm, height above floor level 9485 mm, general weight 437117 kgs, Quantity : 2 nos
 
  689
IDMA26082
MakeKomatsu
ModelL2G300
YOM1989
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke length : 450 mm,
Stroke per minute : 15~30 spm,
Die height : 650 mm,
Slide area : 1000 x 1200 mm,
Bolster area : 2100 x 1350 x 180 mm,
Slide adjustment : 250 mm,
With DC and die lifter,
Material hand robot.
 
  690
IDMA26073
MakeSIMPAC
ModelSS500
YOM
ConditionBrand New
PhotoSee Photo
Capacity : 500 ton,
Slide stroke : 120 mm,
Number of slide stroke : 50,
Available work energy : 5000 kg-m/cycle,
Slide area (L.R. X F.b ) :1500 x 1400 mm,
Bolster area (L.R. x F.B x H) : 1500 x 1400 x 210 mm,
Slide adjustment : 200 mm,
Die height : 350 mm (shut height : 560),
Upright frame opening
Front : min 1700 mm,
Slide (front to back x height) : min 1200 x 250 mm,
Height from floor level to top of bed : 540 mm,
Height from floor to bolster top : 750 mm,
Overall height of press from floor level : max.6400 mm,
Max. depth of press below floor level : approx.3500 mm,
Main motor capacity : 75 Kw
 
  691
IDMA26066
MakeOKK
ModelDCM300B3
YOM1977
ConditionGood Condition
PhotoSee Photo
Capacity : 300 ton,
Stroke : 350 mm,
Stroke per minute : 16,
Slide adjustment : 200 mm,
Die height : 725 mm,
Slide size : 1900 x 1200 mm,
Bolster : 2150 x 1350 mm,
Main motor : 37 kW 4P,
With die cushion.
 
  692
IDMA26065
MakeHitachi
ModelS4-500-270-170
YOM1967
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton,
Stroke : 600 mm,
Stroke per minute : 16,
Die height : 1200 mm,
Slide adjustment : 600 mm,
Moving bolster : 2700 x 1700 mm,
With die cushion.
 
  693
IDMA26035
MakeOKK
Model
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity : 100 ton,
Ram stroke : 170 mm,
No of stroke : 50 spm,
Ram adjustment : 75 mm,
Die height : 350 mm,
Ram undersurface : 450 x 600 mm,
Bolster : 560 x 1060 mm,
Motor : 7.5 kW 4P,
Clutch air pressure : 4kg / cm2,
Balance air pressure : 2-5kg / cm2.
At dead point : 3.5 mm.
 
  694
IDMA26034
MakeAmada,Japan
ModelTPW250
YOM1982
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Stroke length : 254 mm,
Stroke per min : 20~30
Slide adjustment : 120 mm,
Die height : 620 mm,
Slide area : 2100 x 700 mm,
Bolster area : 3210 x 900 mm,
Spindle drive motor : 18.5 kW.
 
  695
IDMA26026
MakeTMP Voronezh Russia
ModelKA4040
YOM1993 Overhauled 2004
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton,
Ram stroke : 900 mm,
Bed area : 4500 x 2500 mm,
Ram area : 4500 x 2500 mm,
Between columns : 4530 mm,
Speed : 8-12 min,
Shut height : 1503 mm,
Ram adjustment : 500 mm,
Bed cushions : 3 x 65 ton, stroke : 300 mm,
Cushion area : 4169 x 1840 mm,
Floor space : 6475 x 5300 mm,
Height over floor mounted in pit : 9320 mm,
Machine Weight : 295,000 kgs.
4 points,
Lateral moving bolster,
Hydraulic safety overload,
Bed cushion.
 
  696
IDMA26011
MakeHitachi
ModelS4-500-330-200
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Capacity : 500 ton,
Bolster : 3300 x 2000 mm,
Slide : 3300 x 2000 mm,
Stroke : 600 mm,
Adjust : 300 mm,
Stroke per min : 18,
Die height : 1200 mm,
Cushion : 160 ton,
Cushion stroke : 300 mm,
With side moving bolster ,
The press has a die cushion and 2 side moving bolsters.
 
  697
IDMA25993
MakeAmada,Japan
ModelSW200
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Bolster : 1800 x 1300 mm,
Stroke : 250 mm,
Stroke per minute : 20-30 mm,
Die height : 480 mm.
 
  698
IDMA25920
MakeWMW Erfurt,Germany
ModelPE2U315FS
YOM1986
ConditionDismantled,Good condition
PhotoSee Photo
Capacity : 315 ton,
Ram stroke : 400 mm,
Moving table dimensions : 2500 x 1450 mm,
Ram adjustment : 320 mm,
Shut height 900 mm,
Stroke : 25 min,
Table cushion : 63 ton,
Cushion stroke : 160 mm,
Height above floor level : 7100 mm.
 
  699
IDMA25916
MakeOKK
ModelDCM200B
YOM1973
ConditionGood Condition
PhotoSee Photo
Capacity : 200 ton,
Stroke length : 400 mm,
Stroke per min : 18 S.P.M,
Slide area : 1000 x 1550 mm,
Bolster area : 1200 x 1800 mm,
Slide adjustment : 200 mm,
Die height : 700 mm,
Frame Type : H,
Motor power : 18 kW,
Net weight : 28 ton,
Dimensions (LxWxH) : 3.3 x 2.3 x 5.8 m.
 
  700
IDMA25907
MakeTMP Voronezh Russia
ModelKB3537
YOM1984
ConditionGood Condition
PhotoSee Photo
500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 70 tons. Press with pneumatic die cushions .
 
  701
IDMA25763
MakeWMW Erfurt,Germany
ModelPKZZI800
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 800 t, Nominal force : 8000 kN, Ram stroke : 500 mm, Number of strokes : 14 min, Shut height : 1050 mm, Bolster plate to ram adjustment stroke : 1050 mm, Bed : 3150 x 1600 mm, Ram : 3150 x 1600 mm, Stroke of pneumatic table : 200 mm, Cussions power : 1600 kN, Main drive motor : 90 kW, Dimensions of press L x W : 6000 x 3000 mm, Height above floor level : 8000 mm, Weight of Press : 145 t.
 
  702
IDMA25746
MakeTMP Voronezh Russia
ModelK3044
YOM
ConditionGood working condition
PhotoSee Photo
The presses are designed for making from sheet stock medium and large size parts that require blanking bending, shaping ,shallow drawing and other cold pressing operations.
Capacity : 2500 ton,
Ram stroke : 630 mm,
Number of ram stroke per minute : 14 mm,
Shut height : 1180 mm,
Bed to ram adjustment stroke : 400 mm,
Bed dimensions : 5000 x 2000 mm,
Ram dimensions : 5000 x 1800 mm,
Bolster plate thickness : 350 mm,
main drive motor power : 200 kW,
Overall dimensions :
Floor space : 7720 x 5600 mm,
Height above floor level : 10800 mm,
Weight approx.: 500 ton.
Qty : 2 nos.
 
  703
IDMA25741
MakeWMW Erfurt,Germany
ModelPKZVI800FS
YOM
ConditionGood Condition
PhotoSee Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton, Quantity : 4 nos.
 
  704
IDMA25617
MakeTMP Voronezh Russia
ModelK3540
YOM1977 / 1981
ConditionGood working condition
PhotoSee Photo
1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. with 2 cushions
 
  705
IDMA25560
MakeWMW Erfurt,Germany
ModelPKZVIII500.1FS
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 500 tons,
Ram stroke : 500 mm,
Ram adjustment : 500 mm,
Shut height between table and ram : max. 1200 mm,
Number of ram stroke per min : 20,
Width between uprights : 3150 mm.
Ram area : 3150 x 2100 mm,
Table area : 3150 x 2100 mm,
Thickness of bolster plate : 225 mm,
Press of cushion : 1600 Kn,
Max. motor input : 75 kW,
Dimensions (LXWXH) : 4700 x 4400 x 7500 mm,
Total weight of press approx. 140 tons.
With Hydraulic Overload System & Moving Bolster.
 
  706
IDMA25558
MakeClearing
ModelS4-1000-120-84
YOM1991
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 tons,
Stroke : 300 mm,
Shut height: 1100 mm,
Motorized adjustment : 200 mm,
Bed area :3000 LR x 2100 FB,
Slide area : 3000 LR X 2100 FB,
0-60 VSPM,

Equipment and Features
Air Clutch and Brake
Air Counterbalances
Recirculating Lube System
(2) Rolling Bolster
Hydraulic Tie-Rod Nuts
Quick Die Change
T-Slotted Ram and Bolster
Hydraulic Overloads
Free Standing Counsel Control
Motors and Controls
94" Wide Windows
 
  707
IDMA25521
MakeWeingarten
Model
YOMRebuilt 2006
ConditionGood Condition
PhotoSee Photo
Capacity: 550 Ton
Bed Size: 2400 x 1500 mm,
Stroke: 600 mm
Shut Height: 925 mm,
Adjustment: 300 mm,
SPM : 10.
Quantity : 3 nos.
 
  708
IDMA25168
MakeDanly
ModelS4-1000-120-84
YOM1964
ConditionVery good condition
PhotoSee Photo
Capacity : 1000 ton,
Bed : 3000 x 2100 mm,
Stroke : 500 mm,
Bolster : 3000 x 2100 mm,
Shut height : 1600 (SDAU,over bed) mm,
Adjustment : 750 mm,
Strokes per min : 20,
Cushion tonnage :166 tons,
Cushion stroke : 250 mm.
No windows but can be installed at extra cost
 
  709
IDMA25167
MakeDanly
Model
YOM1984
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton,
Bed : 3600 x 2100 mm,
Stroke : 900 mm,
Bolter : 3600 x 2100 mm,
Windows in side columns : 2600 mm wide,
Shut height : 1,900 (SDAU) mm,
Adjustment : 150 mm,
Strokes per min :8-20,
With : (2) rolling bolsters- left to right,
With Die Cushion,
With Hydraulic Overload System.
 
  710
IDMA25165
MakeUSI Clearing
ModelS4-1000-156-100
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 ton,
Bed : 3,900 x 2,500 mm,
Stroke : 750 mm,
Shut height : 2,050 mm,
Adjustment :600 mm,
Strokes per min : 10,
Windows : 600(can be opened to 45")
With Rolling bolster,
OmniLink 5000 control with tonnage monitor.
 
  711
IDMA25164
MakeVerson
Model
YOM
ConditionVery good condition
PhotoSee Photo
Capacity : 800 ton,
Bed : 3300 x 2400 mm,
Stroke : 600 mm,
Shut height : 1725 (SADU) mm,
Adjustment : 375 mm,
Strokes per min : 14
 
  712
IDMA25163
MakeClearing
ModelS4-800-132-84 QDC
YOM1960s
ConditionDisassembled
PhotoSee Photo
Capacity : 800 ton,
Bed : 3,300 x 2,100 mm,
Stroke : 800 mm,
Shut height : 1,612.5 (SADU) mm,
Adjustment : 600 mm,
Strokes per min : 17,
Press weight : 350,000 - 400,000 LBS (approx),
Electrics : Link 501, 250 Amps, 480V,
With Hydraulic Overload protection,
No Cushions & No Moving Bolster.
 
  713
IDMA25136
MakeTMP Voronezh Russia
ModelKA3540
YOM1985
ConditionGood Condition
PhotoSee Photo
Nominal force: 1000 ton,
Slide stroke: 400 mm,
No of continuous slide strokes per 1 min: 20,
No of single slide strokes per 1 min: 16 ,
Shut height: 810 mm,
Slide adjustment: 320 mm,
Table dimensions: 3150x1800 mm,
Slide dim., front-back: 1700 mm,
Bolster thickness: 250 mm,
Slide travel to its extreme position where press develops nominal force: 12 mm,
Total pneumatic cushion force: 200 ton,
Pneumatic cushion working stroke: 200 mm,
Upper knock-out force: 50 ton,
Main-drive electric motor power: 132 kW,
Overall press dimensions: 5150x4700x7830 mm,
Press weight: 193 ton.
 
  714
IDMI5782
MakeTMP Voronezh Russia
ModelK3535A
YOM
ConditionGood Condition
PhotoSee Photo
CAP. : 315 TONS,
STROKE : 400 mm,
DIE HEIGHT : 750 mm,
BED AREA : 2500 x 1250mm,
WITH DIE CUSHION
 
  715
IDMA24757
MakeKieserling
ModelSKPN800/2000
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 800 ton,
Distance between rams : 2000 mm,
Distance between guide ways : 1830 mm,
Stroke : 600 mm,
Min / Max Distance between table and ram : 400 / 800 mm,
Ram adjustment : 400 mm,
Ram dimension : 1800 x 1400 mm,
Thickness ram plate : 225 mm,
Stroke min : 14-20,
Max capacity of ram cushion : 32 ton,
Table dimension : 1800 x 1400 mm,
Thickness table plate : 225 mm,
Main motor : 105 kw,
Ram adjustment : 7,5 kw,
Cushion adjustment : 5,5 kw,
Equipped with decoiler : 10ton,
Combined straightening and feed device,
Width : 300-1300 mm,
Thickness : 0,8-6 mm.
 
  716
IDMA24418
MakeTMP Voronezh Russia
ModelK378A
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity :1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons.
Qty : 2 Nos.
 
  717
IDMA24179
MakeTMP Voronezh Russia
ModelKB3537
YOM1981
ConditionGood Condition
PhotoSee Photo  |  See Video
500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 70 tons. Press with pneumatic die cushions .
 
  718
IDMA23926
MakeDanly
ModelSS2-250-84-36
YOM
ConditionGood Condition
PhotoSee Photo
Tonnage Capacity : 250 ton,
Stroke : 300 mm,
Ram adjustment : 375 mm,
Shut height to bed : 1200 mm,
Area of bed : L-R 2100 x F-B 900 mm.
Equipped with :
Air clutch and brake,
Dual palm buttom operation,
Link Control.
(3)Cushions.
 
  719
IDMA23782
MakeWMW Erfurt,Germany
ModelPKZZ250
YOM1983
ConditionGood Condition
PhotoSee Photo
Capacity : 250 ton,
Ram stroke : 400 mm,
Ram stroke per minute : 12...24 mm,
Shut height : 720 ,
Bed : 2500 x 1400 mm,
Quantity : 2 presses available.
 
  720
IDMA23700
MakeWMW Erfurt,Germany
ModelPKZZI800
YOM1981 / 2006
ConditionGood Condition
PhotoSee Photo
Capacity : 800 t,
Nominal force : 8000 kN,
Ram stroke : 500 mm,
Number of strokes : 14 min,
Shut height : 1050 mm,
Bolster plate to ram adjustment stroke : 1050 mm,
Bed : 3150 x 1600 mm,
Ram : 3150 x 1600 mm,
Stroke of pneumatic table : 200 mm,
Cussions power : 1600 kN,
Main drive motor : 90 kW,
Dimensions of press L x W : 6000 x 3000 mm,
Height above floor level : 8000 mm,
Weight of Press : 145 t.
 
  721
IDMA23419
MakeWMW Erfurt,Germany
ModelPKZVIV500TS
YOM1984
ConditionGood Condition
PhotoSee Photo
Centres of pressure 4,
Maximum force of slide 500T,
Stroke of slide 500 mm,
Adjustability of slide 500 mm,
Max. daylight between bolster and slide, SDAU 1000 mm,
Width between columns 2800 mm,
Slide area (W x D)2800x1800 mm,
Bed area (W x D) 2800x1800 mm,
Opening in bed (W x D)2400x1250 mm,
Main motor power 75 kW,
Idle stroke rate 20 per min 20,
Counter pressure of cushion in bed-T 100,
Stroke of cushion plate 200 mm,
Height above ground 7350 mm,
 
  722
IDMA23348
MakeWMW Erfurt,Germany
ModelPKZZ250
YOM1984
ConditionGood Condition
PhotoSee Photo
Max. force of ram 2500 kN, Ram stroke 400 mm, Adjustment of ram 120 mm, Max. Shut height 580 mm, Distance between columns 2500 mm, Ram size (widthxdepth)2320x1250 mm, Table size (widthxdepth)2500 x 1400 mm, Bore in table 2300 x 850 mm, Main motor power 32 kW, No. of strokes/min 12, Capacity of die-cushion 500 kN, Travel of plae of cushion 160 mm, Approx. height over floor 5000 mm.
Qty. 2 Nos.
 
  723
IDMA23179
MakeWMW Erfurt,Germany
ModelPKZZ250/2500
YOM1976
ConditionGood Condition
PhotoSee Photo
Max. force of ram 2500 kN,
Ram stroke 400 mm,
Adjustment of ram 120 mm,
Max. Shut height 580 mm,
Distance between columns 2500 mm,
Ram size (widthxdepth)2320x1250 mm,
Table size (widthxdepth)2500 x 1400 mm,
Bore in table 2300 x 850 mm,
Main motor power 32 kW,
No. of strokes/min 12,
Capacity of die-cushion 500 kN,
Travel of plae of cushion 160 mm,
Approx. height over floor 5000 mm.
 
  724
IDMA23070
MakeRussian
ModelKA3132
YOM
ConditionGood Condition
PhotoSee Photo
160 tons, slide stroke 250mm, 40spm, shut height 610, bed to ram adjustement stroke 160 mm , ram axis to frame distance (overhang) 535 mm , distance clear between columns 1810 mm , bed dimensions 2000x750mm,ram dimensions 1500 x 630 mm , bolster plate thickness 100 mm , 22kW,dimensions 2940 x 2990 x 4750 mm , weight 26.2 tons
 
  725
IDMA23053
MakeRussian
ModelK05.105
YOM1983
ConditionGood Condition
PhotoSee Photo
500 tons , Stroke of ram 250 mm ,
Rate of ram 250 RPM ,
Area of bolster 2500x1400 mm,
Shut Height 750 mm,
Adjustment of distance between the bed bolster and the ram bolster 250,
Overall dimensions of press, mm
4740 x 2750 x 6145 mm ,
Actuator capacity 47 KW,
Weight of press 60.7 tons.
 
  726
IDMA23049
MakeWMW Erfurt,Germany
ModelPKZZI500/2800
YOM1970
ConditionGood Condition
PhotoSee Photo
Capacity : 500 ton.
 
  727
IDMA22805
MakeAmino
ModelSD300C
YOM2000
ConditionGood Condition
PhotoSee Photo
Capacity 300 x 120 ton.F,
Stroke 850 mm,
Daylight 1500 mm,
Table 1200 x 1000 mm.
 
  728
IDMA22726
MakeKyodo,Yodogawa
Model
YOM1973
ConditionPerfect Condition
PhotoSee Photo
150 tons (2 mm above BDC),
120- 200 SPM ,
stroke 25 mm ,
stroke down adjust up 340 mm ,
slide adjustment 50 mm ,
bolster area 1100x850 mm ,
bolster thickness 140 mm ,
slide area 1000x650 mm ,
bed hole area 900x280 ,
22 kW ,For production of Stator and Rotor lamellas, etc.


Including decoiler.
 
  729
IDMA22665
MakeKrupp
ModelPDq4-4000/5.0/500
YOM1982
ConditionVery good condition
PhotoSee Photo
4000 tons, Number of strokes per minute 8 min-1
shut height 1250 mm
Table dimensions 5000Χ3000 mm
Ram dimensions 5000Χ3000 mm
Ram stroke 500 mm
Ram adjustment 500 mm
Main motor power 110 kW
Overall dimensions 5000Χ10000Χ13780 mm
Weight of the machine 920 tons.
 
  730
IDMA22470
MakeWMW Erfurt,Germany
ModelPKZV800
YOM1971 / Overhauled in 2009
ConditionExcellent condition,under power
PhotoSee Photo
Capacity 800 ton,
Stroke 500 mm,
Number of strokes 14 s.p.m.,
Shut Height (S.D.A.U.) 1900 mm,
Adjustment 500 mm,
Table surface 4000 x 2500 mm,
Ram surface 3950 x 2500 mm,
Cushion in bed 220 t,
Cushion stroke 200 mm,
Cushion area 3710 x 1760 mm,
Motor 90 kW,
Weight approx. 217 ton.
With moving bolster and with cushion.
The press has new electric, PLC Siemens S7, new taper gip at the columns,new joints and gaskets.
With Frontal Moving Bolster.
Qty : 3 Nos
 
  731
IDMA22468
MakeWMW Erfurt,Germany
ModelPE2U315FS
YOM1987
Conditionnever used
PhotoSee Photo
Max. press capacity 315 tons, Max. press capacity 160 mm before NMT 1100 kN, Power at main motor 45 kW, Main sizes: distance between side columns 2500 mm, Ram stroke 400 mm, Ram Adjustment 320 mm, Max. shut height of press 900 mm, Height of pull out table 500 mm, Surface of table press 2500 x 1450 mm, Surface of ram of press 2500 x 1450 mm, Dimensions of press above floor 7100 x 4400 x 2750 mm, dimensions of press below floor level 4000 x 4900 x 3000 mm, With front moving bolster. 2 presses
 
  732
IDMA22420
MakeTMP Voronezh Russia
ModelKB3539
YOM
ConditionExcellent condition,under power
PhotoSee Photo
800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons
 
  733
IDMA22403
MakeRussian
ModelK2130
YOM1983
ConditionGood Condition
PhotoSee Photo
100 tons,
Slider stroke length 10-130 mm,
Distance between table and slide – 100 mm,
Freguency of slide stroke – 80/min,
Frequency of courses of a slide 72 rpm,
Table 560x850 mm,
Table effective area width 630 mm,
Technological work: kJ,
- Individual course 3,35,
- Continuous course 1,6,
Closed forging height 380 mm ,
Height above floor level 2520 mm,
Press weight 7300 kg.
- 2 nos
 
  734
IDMA22226
MakeWMW Erfurt,Germany
ModelPKZZI1250
YOM1986
ConditionExcellent ,unused
PhotoSee Photo
Max. force of ram 12500 kN, Ram stroke 630 mm, Adjustment of ram 630 mm, Max. Shut height 1165 mm, Distance between columns 4000 mm, Ram size (widthxdepth) 3950 x 1800 mm, Table size (widthxdepth) 4000 x 1800 mm, Bore in table 3750 x 1300 mm, Main motor power 132 kW, No. of strokes/min 11, Capacity of die-cushion 2500 kN, Travel of plae of cushion 250 mm, Approx. height over floor 9500 mm.
 
  735
IDMA22178
MakeWMW Erfurt,Germany
ModelPKZE1250/1600
YOM
ConditionGood Condition
PhotoSee Photo
1250 tons , slide stroke 500 mm, slide adjustments 250 mm, shut height 1100 mm, table 1600 x 1850 mm, slide 1300 x 1400 mm, cushion 300 tons.
 
  736
IDMA22034
MakeWMW Erfurt,Germany
ModelPEE250
YOM
ConditionGood Condition
PhotoSee Photo
250 tons,Ram stroke 40-160 mm,no. of strokes 71 per min.,shut height 400 mm, table size 1250 x 800 mm, bottom ejector capacity 16 tons,bottom ejector stroke 80 mm, ram size 900 x 670 mm, ram ejector capacity 20 tons,ram ejector stroke 70 mm,plate thickness 100 mm, press weight 18 tons
 
  737
IDMA22031
MakeWMW Erfurt,Germany
ModelPKZ400
YOM1983
ConditionGood Condition
PhotoSee Photo
400 tons,ram stroke 315 mm,no. of strokes 18 per min.,table size 1000 x 1320 mm, adjustment of ram 200 mm,shut height 525 mm, distance between columns 1000 mm, ram size 800 x 1060 mm, bore in table 650 x 650 mm,capacity of die cushion 63 tons,travel of plate of cushion 125 mm, motor power 32 kW,dimensions: 6300 x 2520 x 2670 mm, weight 33.8 tons
 
  738
IDMA22030
MakeWMW Erfurt,Germany
ModelPKZZIV500.1FS
YOM1988
ConditionGood working condition
PhotoSee Photo
Total capacity 500 t, Stroke 500 mm, Ram adjustment 500 mm, Shut height 1100 mm, Distance between columns 2800 mm, Table size 2800 x 1800 mm, Ram size 2800 x 1700 mm, Main motor 104 kW, Main voltage 380 V, Number of strokes 20 s.p.m., Height over floor approx. 7600 mm. Mechanical single action press
 
  739
IDMA21962
MakeVerson
ModelS4-500-186-108
YOM1969
ConditionDisassembled
PhotoSee Photo
500ton, Bed:4650x2700, Stroke:300, Shut Height:1200 (SDAU), Adjustment:500, SPM: 15-30 (Variable), Windows:1800 wide, (2) rolling bolsters but no cushions, Updates controlsm Xycom PLC Controls.
 
  740
IDMA21926
MakeAmada,Japan
ModelTP35
YOM1996
ConditionGood Condition
PhotoSee Photo
B:700x400mm S:80mm 120spm DH:220mm SL:350x300mm
 
  741
IDMA21918
MakeRussian
ModelK3035B
YOM1982
ConditionGood Condition
PhotoSee Photo
315 tons, table dimensions 2500 x 1250 mm, ram stroke 400 mm, 25 SPM, ram adjustment 250 mm, shut height 700 mm.
 
  742
IDMA21906
MakeRussian
ModelK3732
YOM1974
ConditionGood Condition
PhotoSee Photo
160tons, working area of table 2000 mm x 1250 mm,number of ram strokes (1/min) 45,30,22,output of main motor 23 kW, height of the machine 4490 mm, width of the machine 3125 mm, length of the machine 2035 mm, weight of the machine 30000 Kg
 
  743
IDMA21904
MakeRussian
ModelK3035
YOM
ConditionWorking
PhotoSee Photo
315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons.
 
  744
IDMA21894
MakeRussian
ModelK3535A
YOM1986
ConditionGood Condition
PhotoSee Photo
315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons.
 
  745
IDMI5536
MakeZdas
Model
YOM
Conditiongood condition,reconditioned
PhotoSee Photo
Capacity 350 ton,
Bed size: 800x800,
Shut height:450,
Stroke:300,
Ram Setting motorized,
New Siemens motor(2011),
New electrical panel (2011),
New lubrication Pump (2011),
Weight of the machine: approx 18mt.
 
  746
IDMA21816
MakeTMP Voronezh Russia
ModelKB3539
YOM1989
ConditionGood Condition
PhotoSee Photo
800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons
 
  747
IDMA21815
MakeTMP Voronezh Russia
ModelKB3539
YOM1983
ConditionGood Condition
PhotoSee Photo
800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons
 
  748
IDMA21814
MakeRavne,Germany
ModelDE250-2500-1250
YOM1982
ConditionGood Condition
PhotoSee Photo
250 tons , 25 SPM, ram stroke 400 mm, adjustment stroke 250 mm, main motor 37kW, motor RPM 970/min , cushion in table 47 tons , stroke 155 mm, ram size 2500 x 1250 mm, table size 2500 x 1250 mm, distance between columns 2750 mm, height from floor 6700 mm, shut height 800 mm, press weight 50 tons - 2 nos.
 
  749