Category : Sheet Metal

Sub-Category : Press Sheet Stamping Mechanical Double Action

Total Machines Found : 22

Select | Machine Details
 
  1
IDMA32849
MakeWMW Erfurt,Germany
ModelPKnVTVI800.1/3150FS
YOM1977
ConditionGood Condition
PhotoSee Photo
Operating voltage 380 V, frequency 50 Hz.
Total power consumption N (kW) I (A)
Whole press 199 390
Including main electric motor 160 305
Starting current is 2.5 times higher than the rated current.

Press Power Data
1) The number of pressure centers of the relative internal slider: 4
2) The maximum force of the internal slider (25 mm from the end of the stroke): 500 tf
3) The maximum force of the internal slider (at 355 mm end of stroke): 200 tf
4) The maximum force of the outer slider (10 mm from the end of the stroke): 315 tf
5) Hydraulic overload fuse of the internal slide,adjustable: 250-500 tf
6) Hydraulic overload fuse of the external slider,
force at individual pressure centers is adjustable 40-78.75 tf
7) The number of idling in continuous mode: 16 min 1
8) The micro-drive lift time is about 6 minutes.
9) The electric motor to the press drive N = 160 kW.
10) E / engine to the drive slow motion N = 22 kW.
11) The greatest balanced mass of the upper stamp on the inner
slider at 4.5 kgf / cm2 excess pressure in balancing 7.0 t.
12) The greatest balanced mass of the upper stamp on the outer
a slider at 4.5 kgf / cm2 excess pressure in a balancing of 10 tons

Table cushion power data
1) Down force, ejection force 125 tf.
2) The travel of the pillow plate is 355 mm.
3) Adjustment of travel stops 355 mm.
4) The dimensions of the pillow plate are 2480 x 1580 mm.
Main dimensions
1) The distance between the posts is 3150 mm.
2) The stroke of the internal slider is about 800 mm.
3) The stroke of the outer slider is about 630 mm.
4) The maximum drawing depth is 355 mm.
5) Moving both sliders at 500 mm.
6) Max. the distance between the die plate and the inner slider is 1750 mm.
7) Max about the distance between the sub-die plate and the outer slider is 1500 mm.
8) The height of the drawer is 600 mm.
9) Table dimensions 3150 x 2100 mm.
10) The hole in the table is 2500 x 1600 mm.
11) Dimensions of the internal slider 2500 x 1600 mm.
12) The dimensions of the outer slider are 3150 x 2100 mm.
Press Weight Data
- total weight 275 tons
 
  2
IDMA31557
MakeWMW Erfurt,Germany
ModelPKNT315
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 315 ton,
Table: 1400 x 1400 mm,
Blank holder slider: 1350 x 1350 mm,
Drawing slider: 900 x 900 mm,
Distance between columns: 1420 mm
 
  3
IDMA27935
MakeWMW Erfurt,Germany
ModelPKNT160
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 160 ton,
Max. effort of inner ram: 95 ton,
(at a distance of the bottom dead point: 22 mm),
max. effort of outler ram: 65 ton,
(at a distance of to the bottom dead point: 4 mm),
Stroke of inner ram: 425 mm,
Stroke of outer ram: 265 mm,
Adjustment of ram: 130 mm,
Max. stroke of cushion: 200 mm,
Max. effort of retention: 25 ton,
max. effort of ejection: 4 ton,
Quantity: 2 nos.
 
  4
IDMA24980
MakeWeingarten
ModelZS1300.45
YOM1971
ConditionGood Condition
PhotoSee Photo
Total capacity : 1300 to
Capacity of ram,25 mm of dead centre : 800 to
Capacity of blankholder,
6 mm of dead centre : 500 to
Working capacity at
8 strokes per minute : 20000 mkg
Speed of ram 300 mm of dead
centre, 8 strokes per minute : 0,19 m/s
Speed of ram 300 mm of dead
centre, 18 strokes per minute : 0,43 m/s
Daylight between colums : 4500 mm
Max. Drawing depth : 300 mm
Strokes per minute, continuous running,
infinitely variable : 8 - 18
Strokes per minute, single stroke,
infinitely variable : 6,4 - 14,4
Stroke of ram : 1016 mm
Stroke of blankholder : 863 mm
Clamping surface of table
Width x Depth : 4030 x 2438 mm
Clamping surface of blankholder
Width x Depth : 4200 x 2540 mm
Clamping surface of ram
Width x Depth : 3660 x 1984 mm
Adjustment of ram and blankholder : 508 mm
Max. distance bed / ram,
stroke down, adjustment up : 2550 mm
Max. distance between bed / blankholder,
stroke down, adjustment up : 2050 mm
Going up of ram before take off
of blankholder : 25 mm
Capacity of adjustable main drive ca. : 160 kW
Speed of adjustable main drive ca. : 1500 Upm
Motor for ram and blankholder
adjustment : 7,5 kW
Speed, each : 1500 rpm
Height over floor : 10700 mm
Lateral opening
The machine is prepared to the later installation of a
3-part compressed air equipment in the table.
 
  5
IDMA21995
MakeWMW Erfurt,Germany
ModelPKnVTV1800.1FS
YOM1977
ConditionGood Condition
PhotoSee Photo
800 tons,no. of strokes 16 per min.,table size 1700 x 2500 mm, slider size 2800 x 1700 mm, aperture in table 2400 x 1250 mm, maximal effort of pillow in table 100 tf, size of pillow in table 2380 x 1230 tf, width between supports 2800 mm, slider stroke length 500 mm, closer height 1100 mm, height of movable table 500 mm, weight of part table (under floor) without movable parts 14 tons, weight of moving table with reductors part 6 ton, weight pillow in table 10 ton, total weight of table 30 ton, weight of slider 15 ton, weight of cheek (each) 6.5 ton, weight of cross-arm without parts 16 ton, weight of cross-arm without roller of flywheel, roller of muff, muff,brake 25 ton, weight of roller of flywheel 3.5 ton, weight of roller of muff + muff + brake 16 ton, total weight of cross arm 44.5 ton, total weight of press 120 tons -
 
  6
IDMA21675
MakeTMP Voronezh Russia
ModelKA5535
YOM1974
ConditionExcellent
PhotoSee Photo
315 tons, nominal holding down force 200 tons , drawing ram stroke 630 mm, holding down ram stroke 400 mm, 10-16 SPM , shut height for drawing ram 720 mm, shut height for holding down ram 620 mm, bolster plate to ram adjustment stroke 200 mm, bed dimensions 1250 x 1250 mm, drawing ram dimensions 800 x 800 mm, holding down ram dimensions 1250 x 1250 mm, bolster plate thickness 180 mm, main drive motor power 75 kW , overall dimensions 3470 x 3720 x 6580 mm, mass 58.1 tons.depth of drawing 350 mm, hole/opening in table dia 150 mm, lower ejector is available.
 
  7
IDMA20754
MakeWMW Erfurt,Germany
ModelPD4HHTS
YOM1988
ConditionGood Condition
PhotoSee Photo
Max. force of internal ram 6300 kN,
Max. force of external ram 4000 kN,
Ram stroke 280 mm,
Internal ram stroke 900 mm,
External ram stroke 700 mm,
Adjustment between each ram 500 mm,
Max. Shut height for internal ram 1800 mm,
Max. Shut height for external ram 1700 mm,
Distance between columns 3500 mm,
Internal Ram size (widthxdepth)2900x1600 mm,
External Ram size (widthxdepth)3500x2100 mm,
Table size (widthxdepth)3500x2100 mm,
Bore in table 2820x1470 mm,
Main motor power 190 kW,
No. of strokes/min 9-18,
Approx. height over floor 10000 mm.
 
  8
IDMA19806
MakeWMW Erfurt,Germany
ModelPD4HH1000
YOM
ConditionGood Condition
PhotoSee Photo
1000 tons , moving bolster, pneumatic cushion and overload protection.
 
  9
IDMA18387
MakeWMW Erfurt,Germany
ModelPKNZTVI500.1FS
YOM1975
ConditionVery good condition
PhotoSee Photo
Capacity : 500 Tons (315 + 200), draw distance 315mm, slide stroke 710mm, blankholder stroke 560mm, adjustment slider/blankholder 500mm, slider 1600mm, blankholder 1450mm, bed area 2500 x 1600mm, slide area 2000 x 1200mm, blankholder area 2500 x 1600mm, bed opening 2000 x 1160mm, power main motor 90kw, idle run 18SPM, height ocer ground 8280 mm.Moving bolster
 
  10
IDMA17701
MakeWMW Erfurt,Germany
ModelPKNZTV315.1FS
YOM1978
ConditionGood Condition
PhotoSee Photo
315 tons , Max deep of extractor 315 mm,
Internal slide power at end of the stroke 200 tons,
Internal slide power at full deep of extractor 80 tons,
Max external slide power 125 tons,
Internal slide stroke 670 mm,
External slide stroke 425 mm,
Internal and external slide adjustment 400 mm,
Holding power 50 tons
Extrusion poer 50 tons.
 
  11
IDMA17205
MakeWMW Erfurt,Germany
ModelPKnVTVI800 1FS
YOM1987
ConditionGood Condition
PhotoSee Photo
800 tons,no. of strokes 16 per min.,table size 1700 x 2500 mm, slider size 2800 x 1700 mm, aperture in table 2400 x 1250 mm, maximal effort of pillow in table 100 tf, size of pillow in table 2380 x 1230 tf, width between supports 2800 mm, slider stroke length 500 mm, closer height 1100 mm, height of movable table 500 mm, weight of part table (under floor) without movable parts 14 tons, weight of moving table with reductors part 6 ton, weight pillow in table 10 ton, total weight of table 30 ton, weight of slider 15 ton, weight of cheek (each) 6.5 ton, weight of cross-arm without parts 16 ton, weight of cross-arm without roller of flywheel, roller of muff, muff,brake 25 ton, weight of roller of flywheel 3.5 ton, weight of roller of muff + muff + brake 16 ton, total weight of cross arm 44.5 ton, total weight of press 120 tons -
 
  12
IDMA16978
MakeWMW Erfurt,Germany
ModelPKNVT1000
YOM
ConditionWorking
PhotoSee Photo
Capacity : 1000 ton, Conrods number : 4,Table dimensions (X-Y): 3950 x 2800 mm, Slide dimensions (X-Y): 3950 x 2800 mm, Stroke : 950 mm, Light at TDC : 2160 mm, Speed stroke /min : 16, Adjustment slide : 560 mm, Cushion capacity : Stroke ; 600 mm, Accessories : Frontal Moving Bloster.
External Slide : (X-Y)=3950 x 2800 mm, Stroke=950 mm,
Internal slide : (X-Y)=3350 x 2000 mm, stroke=700 mm,
 
  13
IDMA16825
MakeWMW Erfurt,Germany
ModelPD4HH1000 + 630FS
YOM1997
ConditionGood Condition
PhotoSee Photo
capacity of inner ram 1000 tons , with distance to lower dead point 25 mm, capacity of inner ram max 500 tons , with distance to lower dead point 350 mm, stroke of inner ram 900 mm, capacity of outer ram max 630 tons , with distance to lower dead point 10 mm, stroke of outer ram 700 mm, number of idle strokes adjusted 8....18/min , shut height of inner ram 1450 mm/minimum , shut height of inner ram 180 mm/max , shut height of outer ram 1350 mm/minimum , shut height 1700 mm-max, cushion in table stroke 250 mm, stroke of knock out 40 tons .
 
  14
IDMA14530
MakeTMP Voronezh Russia
ModelKA5535
YOM
ConditionGood Condition
PhotoSee Photo
315 tons, nominal holding down force 200 tons , drawing ram stroke 630 mm, holding down ram stroke 400 mm, 10-16 SPM , shut height for drawing ram 720 mm, shut height for holding down ram 620 mm, bolster plate to ram adjustment stroke 200 mm, bed dimensions 1250 x 1250 mm, drawing ram dimensions 800 x 800 mm, holding down ram dimensions 1250 x 1250 mm, bolster plate thickness 180 mm, main drive motor power 75 kW , overall dimensions 3470 x 3720 x 6580 mm, mass 58.1 tons.
 
  15
IDMA14525
MakeWMW Erfurt,Germany
ModelPKNZTVI500.1FS
YOM
ConditionGood Condition
PhotoSee Photo
315 tons, blankholder force 200 tons, draw distance 315 mm, slide stroke 710mm, blankholder stroke 560mm, adjustment slider/blankholder 500mm, slider 1600mm, blankholder 1450mm, bed area 2500 x 1600mm, slide area 2000 x 1200mm, blankholder area 2500 x 1600mm, bed opening 2000 x 1160mm, power main motor 90kw, idle run 18SPM, height ocer ground 8280 mm. Moving bolster
 
  16
IDMA14521
MakeWMW Erfurt,Germany
ModelPKNVT1000.1FS
YOM1983
ConditionGood Condition
PhotoSee Photo
1000 tons, centers of presuure of drawing ram 4, nominal force of both rms 10000 kN, force of drawing ram 6300kN, force of blank holder 4000 kN, drawing depth 450mm, stroke of drawing ram 950mm, stroke of blank holder 600mm, adjustability of both slides, each 560mm.
 
  17
IDMA14135
MakeWeingarten
ModelZS1600.48
YOM1963/2003
ConditionGood condition,under power
PhotoSee Photo
Caqpacity 1600 tons, Slide Tonnage : 1000 Tons, Cushion Tonnage : 600 Tons, Table Size : 4800 x 2200 (Moving Table), Slide Size : 3200 x 1650 mm, Cushion Size : 4500 x 2400 mm, Passage Between Columns : 4800 mm, Open Gap in the columns : 1100 mm, Max. Distance Table / Slide : 2200 mm, Slide travel : 1100 mm, Cushion travel : 900 mm, Slide & Cushion Adjusting : 350 mm, SPM : 9 - 14, Main Motor : 103 kW, Height from ground : 9900 mm, Length : 7500 mm, Width : 4500 mm, Total Weight : 380 Tons, Hydraulic Overload System
 
  18
IDMA13826
MakeWMW Erfurt,Germany
ModelPKnVTV1800.1FS
YOM1991
ConditionGood Condition
PhotoSee Photo
800 tons, table 3150 x 2100 mm.
 
  19
IDMA13737
MakeSchuler German
ModelDBS2-1600-2,8-950
YOM1974 revised 2000
ConditionVery good condition
PhotoSee Photo
1600 tons ,
Press table:
clamping surface (left-right) 2800 mm ,
clamping surface (front-back) 1700 mm ,
height above floor level 580 mm ,
number of tables 2 ,
moving bolster ,
RAM :
ram force 1000 tons ,
clamping surface (left-right) 2150 mm ,
clamping surface (front-back) 1100 mm ,
ram adjustment 500 mm ,
stroke 950 mm ,
number of strokes min 10 /min ,
number of strokes max 20 /min
Ram (mechanical Press):
hydraulic overload protection ,
Downholder :
downholder force 600 tons ,
clamping surface (left-right) 3050 mm,
clamping surface (front-back) 1850 mm,
stroke 800 mm ,
Cushion (Table cushion)
force of cushion 200 tons,
stroke 250 mm,
working principle pneumatical ,
Tool Assembly dimensions :
daylight max. (table-downholder) 1400 mm ,
distance between columns (H-frame) 3160 mm ,
free passage between side columns (width) 1950 mm ,
Electrical specifications :
total power consumption 160 kW ,
mains voltage 550 V ,
mains frequency 50 Hz ,
DIMENSIONS / WEIGHTS
total height 9500 mm ,
total weight approx. 270000 kg ,
Attathcments for presses:
autom. tool clamping device ,
hydraulic overload protection ,
Double Action Drawing Press
Distance between columns: 3400 mm ,
2 Moving Bolsters ,
Die Cushion,
Attachments:
blank loader with 2 stations.
 
  20
IDMA11431
MakeWMW Erfurt,Germany
ModelPKNVT800.1FS
YOM
ConditionGood Condition
PhotoSee Photo
800 tons capacity (500+300 tons),Table size 3150X2100mm, depth of extrusion, 355mm, Stroke of internal ram 800mmAdjustment between rams 500mm,Max. Shut height of internal ram 1750mm, Max. Shut height of external ram 1500 mm, ;length 3150mm, Internal ram size 2500 x 1600mm, Hole in the table 2500 x 1600mm, Main motor power 160 kW, No. of strokes/min 16, Approx. height over floor 8700mm, Stroke of external ram 630 mm, weight 265 tons, movable. With Die Cushions
 
  21
IDMA9996
MakeWMW Erfurt,Germany
ModelPKnVT(I)1000/4000FS
YOM1974 / Revised2000
Conditionoverhauled
PhotoSee Photo
1000 tons, no. of strokes 9 per min., table size 4000 x 2800 mm, tool assembly height max. 1720 mm, distance between columns 4050 mm,downholder stroke 400 tons, downholder clamping surface width 3900 mm,downholder clamping surface depth 2800 mm, downholder adjustment 560 mm, stroke 600mm, Cushion: 160 tons, cushion stroke 950 mm, cushion clamping surface width 3350 mm, cushion clamping surface depth 2000 mm, 4 point connection rod drawing ram, 4 point connection rod blankholder, moving bolster
 
  22
IDMA7635
MakeDanly
ModelD4-600-162-96
YOMReconditioned2000
Condition
PhotoSee Photo
950 tons ( 600 tons + 350 tons counterpressure),table 4500 x 2700 mm,ram adjustment 508mm,shut height of inner slide 2540mm,shut height blankholder 2286mm,stroke of inner slide 1016mm,stroke of blankholder 863mm,weight 204 tons
top