Category : Turning Machines

Sub-Category : Lathe CNC

Total Machines Found : 606

Select | Machine Details
 
  1
IDMA35042
MakeDaewoo
ModelPUMA10S
YOM1989
ConditionGood Condition
PhotoSee Photo
Control:FANUC O-T
XZ travel:200x800mm
Max. cutting length:770mm
Spindle speed:20-2500rpm
Swing over bed:580mm
 
  2
IDMA35036
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Rif. Lotto 257 F.IN. Horrizontal lathe CNC brand MONFORT
Type:KN 5
CNC:Siemens 840D
Lenght work: mm 1000
diametr chuk:mm 250
Hight center: mm 350
power alimentation:380V- 50 Hz
Tool turret:n° Rapid change VDI 30
Years manifacture:2000
rpm:rpm 3'000
Hole head:mm 70
Power motor. Kw. 11

Rif. Lotto 257 F.IN. Horrizontal lathe CNC brand MAZAK
Type:QT 15 N
CNC:Mazak fusion T2
Stroke: work: mm : x 180- y 510
diametr work:mm 254
Power motor:kw 15
power alimentation:380V- 50 Hz
ciuk:diam. 210
Years manifacture:1988
n° of tools:n° 8
Hole head:mm 62

Rif. Lotto 257 F.IN Horrizontal lathe brand CAZNEUVE
Type:HBX 360
Lenght Work: mm 800
Hight center:mm 190
Diameter work:mm 360
Rpm:50 to 3000
Hole head:mm 60
Power motor:kw 5, 2
Wheight:Kg. 1.400
 
  3
IDMA35014
MakeDaewoo
ModelPuma700M
YOM2002
ConditionGood Condition
PhotoSee Photo
Control :- Fanuc series 18i-T
XZ travel : 470 x 1600 MM
Max. turning diameter:- 900 MM
Max. turning length :- 2000 MM
Spindle speed :- 1500 RPM
Chuck size :- 800 MM
Toolchanger :- 12 ATC
 
  4
IDMA35005
MakeMazak,Japan
ModelNexus550
YOM2012
ConditionGood Condition
PhotoSee Photo
Max. Swing Over Bed: 1038.86mm
Max. Machining Diameter: 909.32mm
Max. Machining Length: 2009.14mm
Bar Capacity: 273.30mm
Spindle Bore: 274.32mm
Max. Spindle Speed: 1,000 RPM
Spindle Motor: 44.74 kw
X-Axis Travel: 463.55mm
Z-Axis Travel: 2165.35mm
Approximate Weight: 17233 Kg
EQUIPPED WITH:
Mazak Mazatrol Matrix Nexus CNC Control
Programmable Tailstock
Tool Eye
609.60mm 4-Jaw Chuck
12-Position Turret
Chip Conveyor
Coolant System
 
  5
IDMA35002
MakeGILDEMEISTER
ModelCTX-310
YOM2007
ConditionGood Condition
PhotoSee Photo
250 Chuck Size
Between Center 700
 
  6
IDMA34916
MakeBoehringer,Germany
ModelVDF32M
YOM1991
ConditionGood working condition
PhotoSee Photo
Control: Siemens Sinumerik 880
Colour-graphic with 12" screen
Memory expansion to 128 KB
3-D-Interpolation
Turning length 1150 mm
Swing over bed 700 mm
Turning diameter 440 mm
Bed slide path chuck (on top/down) 650/880mm
Cross slide path X-axis (on top/down) 340/340mm
Clamping chuck-Ψ 315/400mm
Spindle Ψ in front bearing 150mm
2 x 2 controlled axes
Revolution area 25-4000 min-1
Max. torque 1900Nm
Main cutting force 10kN
2-step AC-main drive, 63 kW
Main spindle head size 11
Tailstock NC-controlled
Self-propelling via ball screw,
Rapid movement 10 m/min,
Clamping force adjustable by hand
Steep taper No. 40
Spindle sleeve axial force, adjustable, max. 15.5 kN
Upper turret for driven tools
Revolver with directional logic
12 straight shank receptacle DIN 69880-50 x 78,
thereof 6 positions loadable with driven tools.
Lower turret
With 12 straight shank receptacle DIN 69880-50x78
C-axis
NC-controlled drive of main spindle for boring and milling in connection with driven tools
Steady-rest bottom part, NC-controlled
Own drive by fix ball screw,
Rapid movement 10 m/min,
Ordering steady-rests left and right side possible
Parking position under the spindle head
Enforced coolant pump 80 l/min at 1 bar
Power-operated chip protection door with security bar
Activation by pushbutton or by program with M 58 respectively M 59
Operating hours counter dependant from spindle run
(in control cabinet)
Preparation for time recorder connection (Kienzle)
Feed speed up to 15000 mm/min
Rapid movement 15000 mm/min
Boring force 14kN
Machine weight 18000 Kg
 
  7
IDMI7837
MakeAce jobber
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Chuck Dia 165 bc 300
Control- Fanuc oi mate TB
2003 with stabilizer, with tailstock
 
  8
IDMA34908
MakeOkuma,Japan
ModelLU45
YOM
ConditionGood Condition
PhotoSee Photo
Swing 33.07"
Turning Diameter 25.59"
Spindle Bore 4.33"
X-Axis Travel 17.32"/12.01"
Z-Axis Travel 82.28"/79.72"
Spindle Speed 2,800 RPM
Turret Capacity 12+10
15" 3-Jaw Chuck
Quantity: 2 nos
 
  9
IDMA34876
MakeTraub
ModelTNX 65/42
YOM2009
ConditionGood Condition
PhotoSee Photo
turning diameter 65 mm
turning length 650 mm
control Traub TX 8i -s
bar material dia. 65/42 mm
Spindle 1 RPM 5000 1/min
Spindle 1 Power 24 kW
Spindle 1 Torque 192 Nm
Spindle 2 RPM 5000 1/min
Spindle 2 power 24 kW
Spindle 2 torque 192 Nm
milling spindle drive 5,5 kW
Milling spindle RPM 12000 1/min
Milling Spindle torque 35,4 Nm
Travel x / y / z milling spindle 340 / ±40 / 650 mm
B-axis swivel angle ± 95 index ° / deg
rapid travel range x / y / z 30 / 15 / 60 m/min
Spindle taper tool spindle HSK-A 40
numbers of tools in magazin 80 HSK-A 40
Travel x / y / z turret 2 175 / ±40 / 650 mm
rapid travel range X2, Y2, Z2: 20/20/40 m/min
Travel x/y / z turret 4 175 / ±40 / 650 mm
rapid travel range X4, Y4, Z4: 20/20/40 m/min
total power requirement 85 kVA
weight of the machine ca. 10 t
dimensions of the machine ca. 4,6x2,5x2,6 m
power chuck Rota NCD 165-46
Optical tool measuring TRAUB ATC
TRAUB WinFlexIPS
Software option TRAUB Polyform
Software option 3D Helicalinterpolation for y-axis
Power failure protection
Parts gripper with conveyor belt and parts/rest
piece sorting system
High pressure coolant system 80 bar
Coolant cooling system
Chip conveyor
Collet chuck main spindle Hainbuch Axfix SK 65 BZI
Collet chuck subspindle Hainbuch Axfix SK 65 BZI
Warm up cycle
Direct threading
Barfeeder Interface
Preparation for deep hole drilling Revolver 2&4 / Turret 2 and 4
 
  10
IDMA34860
MakeHaas
ModelTL2
YOM2006
ConditionGood Condition
PhotoSee Photo
Turning length 1219 MM
max. Turning Diameter 406 MM
max. Swing 483 MM
Swing over Cross Slide 282 MM
Spindle speeds 2000 rpm
motor power 8,9 KW

Equipped with :
5 toolholder
 
  11
IDMA34838
MakeDoosan
ModelLYNX 220LM
YOM2011
ConditionGood Condition
PhotoSee Photo  |  See Video
Control: Doosan FANUC i Series,
Kitagawa 3 jaw chuck,
Live tooling,
Iemca magazine bar laoder
 
  12
IDMI7798
MakeExel
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size 250mm
Swing 900
Length 500mm
new Control
Siemens 808 D control
 
  13
IDMI7797
MakeOkuma Howa
Model2SP-25HG
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc Control
 
  14
IDMI7796
MakeOkuma Howa
Model2SP-35HG
YOM
ConditionGood Condition
PhotoSee Photo
Dia: 300 mm
 
  15
IDMI7788
MakeAce,India
ModelSuper jobber 500LM
YOM2013
ConditionGood Condition
PhotoSee Photo
Chuck 200mm
Siemens 828d controller
With Tailstock
 
  16
IDMI7787
MakeHass
ModelSL30
YOM2008
ConditionGood Condition
PhotoSee Photo
300 mm Chuck
450 mm turning dia
850 mm turning length
Control: CNC
 
  17
IDMA34766
MakeCitizen
ModelM32V
YOM2004
ConditionGood Condition
PhotoSee Photo
Machining Diameter: 1.25"
Machining Length - Chucking: 12.59"
Backworking - Chuck Diameter: 1.25"
Backworking - Work Length: 5.8"
X1 Axis Travel / X2 Axis Travel: 0.75" / 0.75"
Y1 Axis Travel: 1.0"
Z1 Axis Travel / Z2 Axis Travel: 4.92" / 12.6"
C Axis Movement C1 / C2: .001 Degree / 1 Degree
Spindle Speed: 8,000 RPM
Rotary Tool Spindle Speeds: 5,000 RPM
Backworking-Spindle Speeds: 7,000 RPM
Spindle Motor: 7.5 HP
Back Spindle Motor: 3 HP
Rotary Tool Motor - Turret: 2 HP
Rotary Tool Motor - Gang Plate: .5 HP
Backworking-Drilling/Tapping: M8 (.39")
Number of Tools - Turret: 10 Tools (20 in 1/2 index)
Number of Tools - Gang Style: 5 Turn / 3 Rotary
Number of Tools - Back Work Toolpost: 3 + rear facing on trt.
Machine Dimensions: 110" x 50" x 69"
Machine Weight: 6,900 lbs.

EQUIPPED WITH:

Y Axis on Turret
C Axis on Main Spindle (.001)
Subspindle with 1 Degree Index
Live Milling and Drilling Capability
Iemca Mini Boss 432/37 Bfd for 12' Bar Stock
Chip Blaster High Press. Coolant System w/ Pump
Chip Conveyor
Parts Catcher
10 Station Turret w/ 1/2 Indexing for 20 Positions
Gang Slide w/ Live Tooling Positions & Y Axis
Back Working Capability from Gang & Turret
Spindle Synchronization
RS 232 Port Interface
3.5" Floppy Disk Interface
3 Color Machine Status Condition Lights
Manuals
Tooling
(4) OD Tools for Turret
(2) ID Holders for Turret
(1) Live Tool Holder for Turret
 
  18
IDMA34744
MakeMori Seiki
ModelNL1500y/500
YOM2007
ConditionGood Condition
PhotoSee Photo
Swing 36.2”/919 mm
Turning Diameter: 15.1”/384 mm
Center Distance: 20.2”/513 mm
Chuck Size: 8”/203 mm
Bar Capacity: 2”/51 mm
Travel (X): 10.2”/259 mm
Travel (Y): 3.9”/99 mm
Travel (Z): 23.2”/589 mm
C Axis Index: 0.001°
Rapid Traverse (Y): 394 IPM
Spindle Nose: A2-5
Spindle Speed: 6,000 RPM
Spindle Motor: 15 HP/11 KW
Live Tooling Motor: 7.5 HP
Live Tooling Speed: 6,000 RPM
Turret Stations: 12
Machine Dimensions: 107" x 76" x 84"/ x 1930mm x 2134mm
Machine Weight: 12,500 lbs/5,670 kg
 
  19
IDMA34742
MakeGildemeister,Germany
ModelMF Twin300
YOM1999
ConditionGood Condition
PhotoSee Photo  |  See Video
C-axis
Y-axis
Control:FANUC 16-T
Distance between spindles:1400mm
X1Z1 travel:253x945mm
X2Z2 travel:198x1080mm
Y axis:±60mm
Chuck:315mm
Spindle speed:20-4000rpm
Turning diameter:250m
Toolchanger:2x12atc
 
  20
IDMA34730
MakeMori Seiki
ModelSL-204SMC
YOM2001
ConditionGood Condition
PhotoSee Photo
Chuck Size: 8" & 6" Hydr. Chks.
Swing Over Bed / Over Cross Slide: 26.8" / 20.09"
Maximum Turning Diameter: 15.36"
Maximum Turning Length: 12.7"
Distance Between Centers: 29.6"
Bar Capacity: 2.5"
X-Axis Travel: 9.3"
Z-Axis Travel: 20.5"
C Axis Spindle Movement - Both Spndl: .001 Degree
Spindle Nose / Spindle Bore: A2-6" / 2.9"
Spindle Speeds: 45 - 4,500 RPM
Spindle Motor: 15 HP
Subspindle Speed / Motor: 60-6,000 RPM / 10 HP
Rotary Tool Speeds / Rotary Motor: 3,000 RPM / 8 HP
Turret Type: 12 Position Turret
Machine Dimensions: 92"x74"x73"
Machine Weight: 10,500 lbs.
Equipped With:
Live Milling/Drilling Capability
Subspindle
Full "C" Axis Spindle Rotation on Main/Subspd
Parts Catcher
Parts Exit Conveyor
Chip Conveyor
8" & 6" Jaw Hydraulic Chucks
Royal Filtermist FX300 Filter System
3 Color Machine Status Lights
RS 232 Port for DNC Interface
3.5" Floppy Disk Interface
Slant Bed Design
Boxed Ways
All Available Tooling
All Available Manuals
 
  21
IDMA34729
MakeMori Seiki
ModelSL-204SMC
YOM2001
ConditionGood Condition
PhotoSee Photo
Product Details:
Chuck Size 8"
Max Diameter Bar Capacity 2.5"
Max Swing Over Bed / Carriage / Front Cover 26.8" / 20.1" / 18"
Turning Diameter (Max / Std) 15.3" / 8.2"
Max Machining Length 12.7"
Spindle Motor 15 / 10 HP
Spindle Speed 40 - 4500 RPM
Spindle Nose A2-6
Spindle Bore 2.9"
Tools 12
Sub Spindle Chuck Size 6"
Sub Spindle Motor 10 / 7.5 HP
Sub Spindle Speed 60 - 6000 RPM
Rapid Traverse Rates (X / Z) 708 / 945 IPM
X-Axis Travel 9.3"
Z-Axis Travel 20.5"
C-Axis Index (L & R) .001 Degree
Turret Index (Single Step) 0.2 Seconds
Machine Dimensions (L x W x H) 91.3" x 73.7" x 72.5"
Machine Weight 11,000 lbs.
Distance Between Centers 29.6"
Features:
• MORIC MSG-805 CNC Control
• 10.4" Color LCD
• MORI SEIKI GANTRY ROBOT GL-05 with 14 Station Work Stocker
• C-Axis Milling Capability on Main & Sub Spindle
• Programmable Sub Spindle
• 8" SMW Autoblok Hydraulic Chuck on Main Spindle
• 6" Kitagawa B206 Hydraulic Chuck on Sub Spindle
• Turbo Chip Conveyor (Side Exit)
• Mfg Date September 2001
• (3) OD Live Holders
• (2) Face Live Holders
• (3) Boring Bar Holders
• (1) Double Boring Bar Holder
• (2) Tandem Turning Holders
• (1) Cut Off Holder
• Three Color Tower Light
• Slant Bed Box Way Construction
 
  22
IDMA34728
MakeGildemeister,Germany
ModelMF TWIN 65
YOM2005
ConditionGood Condition
PhotoSee Photo  |  See Video
Control: CNC Siemens 840D,
Hainbuch main spindle chuck,
Hainbuch sub spindle chuck,
Parts catcher,
Hours - Running: 37,559 hours,
Hours - Power on: 72,157 hours,
Iemca magazine bar loader.
Tooling package:
2 off 1:1 driven tool er25
1 off 3:1 driven tool er16
5 off 25mm VDI 20 Axial tool holders
3 off 32mm VDI 20 Axial tool holders
4 off 16mm VDI 20 Radial SQ tool holder
1 off 16mm VDI 20 Axial SQ tool holder
1 off 26mm Part off blade holder
Also 2 off bottom turret drive belts.
Equipment for magazine bar loader:
68mm channel set with pusher and forenose,
48mm channel set with pusher and forenose,
various bar grippers
 
  23
IDMA34727
MakeMori Seiki
ModelSL-204SMC
YOM2002
ConditionGood Condition
PhotoSee Photo
Type of CNC Control MSG-805 MSG-805
# Axis 5 5
Swing 26.8 in 680.72 mm
Turning Diameter 15.3 in 388.62 mm
Center Distance 19.9 in 505.46 mm
Chuck Size 8 in 203.20 mm
Bar Capacity 2.5 in 63.50 mm
X Axis Travel 9.3 in 236.22 mm
Z Axis Travel 20.5 in 520.70 mm
B Axis Travel (Sub Spindle) 21 in 533.40 mm
C Axis Index 0.001° 0.001°
Rapid Traverse (X/Z) 708/944 ipm 708/944 ipm
Spindle Nose A2-6 A2-6
Spindle Speed (RPM) 4500 4500
Main Motor 15 hp 15 hp
Live Tooling yes yes
Live Tooling Speed 4,000 rpm 4,000 rpm
Live Tooling Motor 7.5 hp 7.5 hp
Sub Spindle yes yes
Sub Spindle Chuck 6 in 152.40 mm
Sub Spindle Speed 6,000 rpm 6,000 rpm
Sub Spindle Motor (HP) 10 hp 10 hp
Turret Capacity 12 12
Tailstock no no
Y Axis no no
Dimensions 92" x 74" x 73" 92" x 74" x 73"
Weight 10000 lb 4,535.92 kg
EQUIPPED WITH
- MSG-805 Control
- Chip Conveyor
- Coolant Tank & Pump
 
  24
IDMA34711
MakeMAZAK
ModelSQT200MSY
YOM2000
ConditionGood Condition
PhotoSee Photo
Type: SQT 200 MSY
CNC: Mazak fusion 640 T
n° of axis: n° 4
Lenght work: mm 574
diametr work: mm 525 / 300
Power motor: kw 18,5
ciuk: diam. 210
rpm: rpm 5.000
n° of tools: n° 16
Hole head: mm 51
chip evacuator:-loading sistem type Samsys
 
  25
IDMA34710
MakeHaas
ModelSL20
YOM2005
ConditionGood Condition
PhotoSee Photo
Type: SL 20
CNC: Haas
Lenght work: mm 508
diametr work: mm 262
Power motor: kw 15
ciuk: diam. 210
rpm: rpm 4.000
chip evacuator:-loading sistem
 
  26
IDMA34709
MakeDaewoo
ModelPUMA350A
YOM1999
ConditionGood Condition
PhotoSee Photo
Type: PUMA 350A
Lenght work: mm 1150
Weight: 9000kg
- Swing over bed: 700mm
- Swing over carriage: 480mm
- Recommended machining diameter: 310mm
- Maximum turning diameter: 550mm
- Distance between points: 1050mm
- Bar passage: 91mm
Maximum advisable weight:
- With plate: 400kg'f
- With bars: 1100kg'f
Main motor power: 22KW - 30HP
- X axis travel: 362mm
- Z axis travel: 1105mmm
- X travel speed: 16m / min
- z travel speed: 20m / min
Head:
- Plate diameter: 305mm
- Hole through head: 102mm
- Speed range: 30-3000rpm
- Nose: A2-8
Turret:
- Number of tools: 12
- Indexed time: 0.25s
- Tool height: 25mm
Programmable tailstock
Point shank diameter: 120mm
Travel cane point: 120mm
Point cone: MT # 6
Automatic lubrication on rod and guides.
Chip collector INCLUDED: Marca META, Srl
Standard accessories:
- FANUC 18T-C control
- Fanuc AC motor
- Kitagawa 3-jaw chuck - 305mm diameter
- Hydraulic bidirectional turret
- Centralized lubrication
- Refrigeration system
- Rotating point MT # 6
- CNC graphics
- Chip collection tank
- Coolant tank
- Plate opening and closing pedal
- Point forward and reverse pedal Daewoo PUMA 350 Cnc lathe
 
  27
IDMA34705
MakeDaewoo
ModelPUMA12L
YOM1992
ConditionGood Condition
PhotoSee Photo
Type: PUMA 12 L
CNC: FANUC
Lenght work: mm 1020
Diametr work: mm 560 / 330
spindle Hole: mm 65
Power alimentation: 380V- 50 Hz
RPM: rpm 4.500
Tools magazine: n° 10
 
  28
IDMA34696
MakeDoosan
ModelPUMA240B
YOM2005
ConditionGood Condition
PhotoSee Photo
Type: PUMA 240B
CNC: FANUC 21TB
Stroke: mm 240 x 580
Diametr work: mm 550 / 350
spindle Hole: mm 65
Power motor: Kw. 18
Power alimentation: 380V- 50 Hz
RPM: rpm 4.500
Tools magazine: n° 12
Wheight: kg. 4.200
 
  29
IDMA34695
MakeDaewoo
ModelPUMA240L
YOM2004
ConditionGood Condition
PhotoSee Photo
Type - PUMA 240L
CNC- FANUC 21TB
Diametr work - mm 550 / 390
spindle Hole - mm 65
Power motor - Kw. 18
Power alimentation - 380V- 50 Hz
RPM - rpm 6.000
Tools magazine - n° 10
 
  30
IDMA34691
MakeMazak,Japan
ModelIntegrex 300-IIIS
YOM2004
ConditionGood Condition
PhotoSee Photo
Chuck Size : 10"
Swing : 33.5"
Turning Diameter : 30"
Center Distance : 60"
Bar Capacity : 3.46"
X-Axis Travel : 24.8"
Y Axis Travel : 9.06"
Z-Axis Travel : 62.41"
B Axis Head Tilt : 225°
C Axis Index : 0.001°
W Axis Travel : 41.34"
Rapid Traverse (X/Y/Z) : 1,496/1,024/1,496 ipm
Spindle Nose : A2-8
Main Motor : 30 HP
Sub Spindle : yes
Sub Spindle Speed : 4,000 RPM
Sub Spindle Motor (HP) : 25/20 HP
Live Tooling " yes
Live Tooling Speed : 12,000 RPM - Milling Spindle
Live Tooling Motor : 25 HP
Tailstock : no
Y Axis : yes
ATC Capacity : 40 stations
Dimensions : 202" x 93" x 110"
Weight : 28,700 pounds
 
  31
IDMA34690
MakeHankook
ModelProtec 7NB
YOM2012
ConditionGood Condition
PhotoSee Photo
Chuck Size : 21"
Swing : 29.5"
Turning Diameter : 29.5"
Center Distance : 59"
Bar Capacity : 6.3"
X Axis Travel : 16.7"
Z Axis Travel : 56.5"
Rapid Traverse (X/Z) : 236
Spindle Speed (RPM) : 1,000
Main Motor : 20 HP
Turret Capacity : 8
Tailstock : yes
Y Axis : no
Dimensions : 131" x 68" x 79"
Weight : 8,650 pounds
Live Tooling : no
Sub Spindle : no
# Axis : 2
EQUIPPED WITH:
- Fanuc 21i-TB CNC Control
- Chip Conveyor
- Coolant Tank & Pump
- 21" Samchully MH-221 Hydraulic Chuck
- Tailstock
- Duplomatic 8 Position Turret
- Manual Guide i
- Available Manuals
 
  32
IDMA34689
MakeHankook
ModelProtec-9NB
YOM2012
ConditionGood Condition
PhotoSee Photo
Chuck Size : 21"
Swing : 37.4"
Turning Diameter : 37.4"
Center Distance : 79"
Bar Capacity : 6.3"
X Axis Travel : 21.1"
Z Axis Travel : 73"
Rapid Traverse (X/Z) : 236
Spindle Speed (RPM) : 800
Main Motor : 35 HP
Turret Capacity : 6
Tailstock : no
Y Axis : no
Dimensions : 176" x 87" x 73"
Weight : 15,500 pounds
Live Tooling : no
Sub Spindle : no
# Axis : 2
EQUIPPED WITH:
- Fanuc 21i-TB Control
- Chip Conveyor
- Coolant Tank
- 21" Samchully (MH-221) Hydraulic Chuck
- (6) Position Duplomatic Turret
 
  33
IDMA34688
MakeHankook
ModelProtec-9NC
YOM2012
ConditionGood Condition
PhotoSee Photo
Control Type : Fanuc 21i-TB
Chuck Size : 32"
Swing : 37.4"
Turning Diameter : 37.4"
Center Distance : 78.74"
Bar Capacity : 9.05"
X Axis Travel : 21.1"
Z Axis Travel : 73"
Rapid Traverse (X/Z) : 236
Spindle Speed (RPM) : 630
Main Motor : 30 HP
Turret Capacity : 6
Tailstock : no
Y Axis : no
Dimensions : 176" x 87" x 73 "
Weight : 15,500 pounds
Live Tooling : no
Sub Spindle : no
# Axis : 2
EQUIPPED WITH:
- Fanuc 21i-TB Control
- Chip Conveyor
- Coolant Tank
- 32" Samchully HCH-32 Hydraulic 3-Jaw Chuck
- 10" Spindle Bore
- 6 Position Revolver Turret
 
  34
IDMI7767
MakeEmco
ModelEmcoturn425MC
YOM2001
ConditionGood Condition
PhotoSee Photo
Centre height: 190 mm,
Turning length: 190 mm,
Bar loader: FMB Turbo
No. of turret tools: 2/24
Bar loader size/capacity: 3 m/2 mm,
Power; 380 v /5.5 kw
Control: Siemens sinumeric
 
  35
IDMI7766
MakeMacpower
ModelVX200Super
YOM2012
ConditionGood Condition
PhotoSee Photo
Controller Fanuc
Diameter:200 mm
Length: 500 mm
Max Turning Dia: 300 mm
Swing over bad: 400 mm
Distance between Center: 600mm
Spindle Nose: A2-6
Spindle Bore :63 Max
Bar Capacity :51
Speed Range:3500 rpm
 
  36
IDMI7765
MakeEmco
Model
YOM1996
ConditionGood Condition
PhotoSee Photo
Centre Height: 190 mm
No. Of Turret / Tools 2/24
Turning Length: 190 mm
Bar Loader Size/capacity:1 m / 26 mm
Control: Siemens Sinumeric
Power 400 V / 24 A /9.5 kw
Double Spindle &
Double Sub Spindle
 
  37
IDMI7761
MakeLeadwell,Taiwan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max Swing: 450 mm,
Swing over cross slide: 290 mm,
max. turning diameter: 210 mm,
max. turning length: 420 mm,
Bar capacity: 51 mm,
Max. workpiece weight:115 kg
Travel
X axis: 105+ 15 mm,
Z axis: 460 mm,
Spindle
Spindle speed range: 4500 rpm,
Chuck size: 170 mm,
Type of spindle nose: A2-5
Through spindle hold diameter:62 mm
Front bearing ID OD: 90/140 mm
Rear bearing ID/OD:90/140 mm,
 
  38
IDMI7760
MakeMacpower
Model
YOM
ConditionGood Condition
PhotoSee Photo
Between Center: 1000 mm
 
  39
IDMI7751
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) Hwacheon Eco31
1995 model
Chuck 300mm
Fanuc OT controller
With Tailstock
2) HMT SKT25
1998 model
Chuck 300mm
Sinumerik controller
With Tailstock
3) Torshalla
2005 model
Chuck 300mm
Turning length 1000mm
Fanuc OiMate TC
With Tailstock
 
  40
IDMI7750
MakeDoosan
ModelS280
YOM2005
ConditionGood Condition
PhotoSee Photo
WORKING CAPACITY
Max Turning Diameter: 280 mm
Max Turning Length: 330 mm
Swing: 450 mm
Distance Between Centers: 380 mm
Chuck Equipped: 200 mm (KITAGAWA)
CNC
Control: Fanuc Oi-T (Alpha Drives)
SPINDLE
Max Rotation Speed: 4500 RPM
Spindle Nose: A2-5
Spindle Bore: 61 mm
Spindle Motor Power: 7.5 / 11 kW
TAILSTOCK
Tailstock Taper: MT 4
Tailstock Quill Stroke: 80 mm
TURRET
Turret: 10 Stations
Tool Shank: 20 x 20 mm

Parts Catcher, Tool Setter, Chip Conveyor, Manuals
 
  41
IDMA34665
MakeOkuma,Japan
ModelLB3000 EX CNC
YOMNovember 2008
ConditionGood Condition
PhotoSee Photo
Centers distance: 1000 mm

Equipped with:
With motorized tools
FANUC Robot capacity 15 Kg
Sub-spindle
B-Axis tailstock
Note: The machine is ten years old but has only few working hours. It is suitable for super finishing too.
 
  42
IDMI7749
MakeCincinnati,USA
ModelCINTURN 15U
YOM2002
Conditionworking condition ,under power
PhotoSee Photo  |  See Video
Control : Fanuc 18i-t
Condition : working
Chuck Size: 15 inch & 18 inch
Swing Over Bed: 28” (710mm)
Max turning length: 100” (2540mm) & 80" (2000 mm)
Turning Dia : 18 inch (457 mm )
Spindle Hole: 4” (100mm)
Turret: 7 Position with 7 Position OD Crown
Power Requirement: 25HP
Equipped with:
Heavy Duty Slant Bed Construction
3 Jaw Hydraulic & Pneumatic SMW AUTOBLOK Chuck
Fanuc 18iT Control
Hydraulic Tailstock
Steady Rest
Chip Conveyer
 
  43
IDMA34645
MakeFemco,Taiwan
ModelHL-35
YOM2005/05
ConditionGood Condition
PhotoSee Photo
Control: FANUC Oi-TC,
Maximum turning diameter: 360mm,
Maximum turning length: 642mm,
Maximum spindle speed: 2,000 rpm,
Spindle bore: 76mm,
Spindle motor: 25 HP,
12 station turret,
10" hydraulic chuck,
Programmable tailstock,
Chip pan and chip conveyor,
Coolant system,
Automatic lubrication system,
Box way heavy duty construction
 
  44
IDMI7722
MakeZodiac
Model
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc OiTF CNC controller
chuck dia : 200mm
swing : 300mm
Hydraulic Turret 8 station
Automation Lubrication
 
  45
IDMI7721
MakeMori Seiki
ModelSL3
YOM
ConditionGood Condition
PhotoSee Photo
CNC : Syntec Controller
chuck dia : 200mm
ABC : 600mm
Tailstock
Hydraulic Turret 12 station
Automation Lubrication
 
  46
IDMA34563
MakeGILDEMEISTER
ModelNEF400
YOM2007
ConditionGood Condition
PhotoSee Photo
Turning diameter - 400mm
Turning length - 650mm
Spindle bore - 65mm
Dimensions - 2600x1650x1800mm
Weight - 2800kg
 
  47
IDMA34558
MakeSaeilo Contur
ModelMSL500MC
YOM2013
ConditionGood Condition
PhotoSee Photo
turning diameter max. 370 mm
turning length 700 mm
control Sinumerik 828D Siemens
greates pass round over bed 620 mm
swing diameter over slide rest 370 mm
Main spindle:
turning speed range - main spindle 10 - 3.500 min/-1
power capacity - main spindel 22 kW
spindle diameter in front bearing 130 mm
spindle bore 90 mm
max. usable bar diameter 75 mm
max. chucking diameter 300 mm
spindle nose ISO A2-8
turret:
number of toolpositions 12 pos.
tool taper VDI 40
change-time tool to tool 0,34 sec
Tool-Drive Ja / Yes
axis stroke:
x-axis 265 mm
z-axis 770 mm
C-Axis 360 °
input unit 0,001 mm
Tailstock:
tailstock 650 mm
diameter of quill 80 mm
taper of center MK 5
25.05.2021 09:17:48 8 von 9

feeds:
rapid traverse X/Z: 30 m/min
total power requirement 30 kVA
weight of the machine ca. 5,5 t
dimensions of the machine ca. 5,0 x 3,0 x 2,6 m
Documents
Chip conveyor
Coolantsystem
hydraulic system
Tool drive mechanisum
Tailstock
Signal-Light
tool setter
C-axis
 
  48
IDMA34557
MakeDMG Mori Seiki
ModelALX 2000 MC
YOM2020
ConditionGood Condition
PhotoSee Photo
turning diameter max. 366 mm
turning length 517 mm
control M 730 UM SLIMLine
Main spindle:
turning speed range - main spindle max. 4.500 min/-1
power capacity - main spindel 22 / 15 / 11 kW
spindle nose JIS A-6
spindle bearing diameter 120 mm
spindle bore 73 mm
max. usable bar diameter 65 mm
C-Axis 0,001 °
chucking diameter max. 250 mm
axis stroke:
x-travel 250 mm
z-travel 575 mm
C-Axis 360 °
feeds:
rapid traverse ( X / Y / Z ) 30 / - / 30 m/min
rapid traverse C-axis 400 min/-1
turret:
number of toolpositions 12 pos.
25.05.2021 09:17:48 6 von 9

Schank height for square tool 25 mm
Drill shank diameter 50 mm
turret change time 0,25 sec.
Driven Tool Positions:
Spindle speed - driven tools max. 12.000 min -1
power capacity - driven tools 5,5 / 3,7 kW
Tailstock:
tailstock adjustment 498 mm
taper of center MK 4
total power requirement - kVA
weight of the machine ca. 3,8 t
dimensions of the machine ca. 5,0 x 2,5 x 2,5 m
Documents
Chip-Tray
Coolantsystem
high pressure coolant 10 bar
collet chuck SMW SP-1 KZS-MB 40
spindle oil cooler
Turret
Tool drive mechanisum
Tailstock
coolant pistol
Signal lamp - 4 colour
parts catcher
tool setter
 
  49
IDMA34556
MakeOkuma,Japan
ModelMac Turn 30
YOM1999
ConditionGood Condition
PhotoSee Photo
turning diameter 550 mm
turning length 1000 mm
control OSP 7000 L 4100 L
turning dia. over bed 550 mm
turning diameter over cross slideways 500 mm
x-axis 430 mm
z-axis 1090 mm
y-axis 190 mm
c-axis 0,001 °
Drive 15/11 kW
turning speeds 20-4500 U/min
spindle bore 62 mm
milling spindle 6.000 U/min
tool change unit 40-fach
tool taper SK 40
max. tool diameter 110 mm
max. tool length 300 mm
max. tool weight 10 kg
total power requirement kW
weight of the machine ca. 10,5 t
dimensions of the machine ca. 5,2x2,5x2,3 m
 
  50
IDMA34554
MakeMori Seiki
ModelZT 1500 Y
YOM2004
ConditionGood Condition
PhotoSee Photo
swing diameter max. 250 mm
turning length max. 120 mm
control MSX 501
max. turning diameter 190 mm
standard turning dia. 170 mm
distance between spindles 750 mm
max. bar capacity 52 mm
Main spindle:
turning speed range - main spindle 60 - 6.000 min/-1
power capacity - main spindel 22 / 18,5 kW
max. Torque 198 Nm
Number of speed ranges 1
spindle nose JIS A2-5
spindle bearing diameter 95 mm
usable bar diameter max. 52 mm
C-Axis 0,001 °
Subspindle:
Spindle speed range subspindle 60 - 6.000 min/-1
power capacity - Sub spindle 22 / 18,5 kW
max. Torque 198 Nm
Number of speed ranges 1
spindle nose JIS A2-5
spindle bearing diameter 95 mm
usable bar diameter max. 52 mm
C-Axis 0,001
°
Traverses Subspindle B: 525 mm
turret:
Number of Turret
2
number of toolpositions 2x 16 pos.
Number of driven toolspositions 2x 16 pos.
Shank height for square tool 20 mm
Drill shank diameter 25 mm
turret change time 0,2 sec.
tool taper VDI 30
Spindle speed - driven tool stations max. 6.000 min -1
power capacity - driven tool-stations 5,5 / 3,7 / 2,2 kW
axis stroke:
x-axis 1+2: 140 mm
y-axis 1: +/- 40 mm
z-axis 1 / 2: 450 / 410 mm
b-axis 525 mm
feeds:
feed speeds X 1/2: 18.000 mm/min
feed speeds Y: 6.000 mm/min
feed speeds Z 1/2: 24.000 mm/min
feed speeds B: 24.000 mm/min
rapid traverse X 1/2: 18 m/min
rapid traverse Y: 6 m/min
rapid traverse Z 1/2: 24 m/min
rapid traverse B: 24 m/min
rapid traverse C: 400 min/-1
Tipp feed X/Z/B: 0 - 5.000 mm/min
total power requirement 73,9 kVA
weight of the machine ca. 5,1
t
dimensions of the machine ca. 6,5 x 3,0 x 2,5
m
Documents
Chip conveyor
Coolantsystem
C-axis
Y-axis
Subspindle
tool setter
Tool drive mechanisum
bar feeder interface
bar feeder KUPA
collet chuck 2x
Three Jaw Chuck 2x
fixed tool-holders 43x
live tool holders 37x
Jaws
Spindle-Reduction-Tubes 7x
Signal-Light
work light
parts catcher
Parts removal
 
  51
IDMA34532
MakeLitz
ModelLT400M
YOM2011
ConditionGood Condition
PhotoSee Photo
Travel
X Axis Travel mm 180
Z Axis Travel mm 530
Spindle
Spindle Rpm RPM 30-4000
Spindle Nose A2-6
Front Bearing Inner Diameter mm 100
Thru-Hole Diameter mm 63
Capacity
Swing Over Bed mm 400
Swing Over Size mm 320
Center Distance mm 645
Standard Turning Diameter mm 218
Max Turning Diameter mm 320
Max Turning Length mm 530
Bar Capacity mm 52
Turret Capacity
Turret 12-STATION
Outer Diameter Size mm 25
Max Inner Diameter mm 40
Controller
FANUC 0i-TD
Tailstock
Moving Travel Of Tailstock mm 435
tailstock Spindle Travel mm 100
Tailstock Spindle Taper MT5
Tailstock Spindle Diameter mm 90
Moving Speed
X Axis Rapid Travel Speed M/min 20
Z Axis Rapid Travel Speed M/min 24
Motor
Spindle Motor kw 11/15
X-Servo Motor kw 1.2
Z-Servo Motor kw 2.5
Turret-Servo Motor kw 1.2
Miscellaneous
Power Requirement KVA 15
Coolant Capacity L 200
Machine Dimension
Weight kg 4300
Length mm 2250
Height mm 1770
Width mm 1670
 
  52
IDMA34449
MakeBoley
ModelBC12
YOM1999
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 21 ITA,
Ikura Bar Top Short Magazine Bar Loader.
 
  53
IDMA34431
MakeMazak,Japan
ModelSQT200MY
YOM2001
ConditionGood Condition
PhotoSee Photo  |  See Video
Maximum Swing ......................... 20.67″
Maximum Cutting Diameter .............. 11.81″
Maximum Cutting Length ................ 21.1″
Spindle Speed ......................... 35-5,000 Rpm
Spindle Nose .......................... A2-6
Spindle Bore .......................... 2.4″
Bar Capacity .......................... 2.0″
Spindle Indexing (C-Axis) ............. 0.001 Deg -360,000 Positions
Spindle Horsepower .................... 25 H.P.
Spindle Torque ........................ 245 Ft/Lbs.
No. Of Tools .......................... 12 Position Drum (Non-Lift)
Mill Spindle Speed .................... 25-4,500 Rpm
Mill Spindle Horsepower ............... 5 H.P.
X-Axis Travel ......................... 7.125″
Y-Axis Travel ......................... 4″ +/- 2.0″
Z-Axis Travel ......................... 2.75″
Rapid Traverse (X/Y, Z) ............... 1,181 Ipm/472 Ipm
Tailstock Spindle Travel/Body Travel... 5.91″ / 15.75″
Tailstock Quill Dia / Taper ........... 3.14″ / Mt 5

Floor Space Requirements: 119″ X 70″ X 78.5″ H
Approximate Machine Weight: 13,000 Lbs

Equipped With:
– Mazak Mazatrol 640T Cnc Control
– Chip Conveyor
– Tool Eye
– Tailstock
– Collet Nose
- All Available Manuals
 
  54
IDMI7699
MakeLMW
ModelLL15TL3
YOM2006
ConditionGood Condition
PhotoSee Photo
Max. Turning Dia.- 265 mm
Chuck Diameter: 200 mm
Length: 300 mm
Controller - Siemens
Quantity: 4 nos
 
  55
IDMI7673
MakeEcoco
ModelSJ35
YOM1998
ConditionGood Condition
PhotoSee Photo
With Stabilizer
CPACITY- Dia 400/ 540mm Lengt
 
  56
IDMA34417
MakeGildemeister,Germany
ModelCTX400
YOM2000
ConditionGood Condition
PhotoSee Photo
Distance between centres:550mm
XZ travel:220x635mm
Spindle speed:25-5000rpm
Spindle bore:61mm
 
  57
IDMA34415
MakeHyundai
ModelE160LMC
YOM2015
ConditionGood Condition
PhotoSee Photo
MAX SWING:18.9"
MAX TURNING DIA.:7.5"
MAX TURNING LENGTH:16.9"
CHUCK SIZE:8"
BAR CAPACITY:2"
SPINDLE BORE:2.4"
POWER 15 HP
LIVE MILLING MOTOR 10.2 HP
SPINDLE SPEED:4000 RPM
MILLING SPINDLE SPEED:4500 RPM
X-AXIS TRAVEL:6.5"
Z-AXIS TRAVEL:18.1"
SPINDLE NOSE:A2-6
TAILSTOCK:Yes
QUILL TRAVEL 3.1"
TAILSTOCK TAPER MT4
FEED RAPID TRAVERSE - X/Z AXIS 1181 IPM
OPTIONS / EQUIPPED WITH
C-AXIS (0.001° INDEXING) TAILSTOCK
CHIP CONVEYER 1 - COAXIAL LIVE TOOLING HOLDER ER25
5 - O.D. TURNING HOLDERS 3/4" 4 - BORING BAR HOLDERS 1.25"
2 - PERPENDICULAR LIVE TOOLING HOLDERS ER25 1 - FACING HOLDER 3/4"
5 - BLANK PLUGS TO COVER EMPTY POCKETS IN TURRET MANUALS
 
  58
IDMA34412
MakeHaas
ModelSL30
YOM2007
ConditionGood Condition
PhotoSee Photo
Advanced against
Conveyor
Chuck dia 400
Between peak 800
Gearbox problem
Gearbox has changed
Machine weight approx. 7 tonnes
 
  59
IDMA34410
MakeCitizen
ModelM16
YOM2004
ConditionGood Condition
PhotoSee Photo
Machining Diameter: 5/8"
Machining Length per Chucking: 7 3/4" (200mm)
Drilling Diameter: 0.23" Maximum Threading
Diameter (tap & die): M6
Main Spindle Speed: 200 - 10000 rpm
Main Spindle Indexing: Full C-Axis
Rotary Spindle on Gang Tool Post:
Drilling Diameter: 0.19" (Tapping M4)
Spindle Speed: 200 - 8000 rpm
Rotary Spindle on Tool Turret Head:
Drilling Diameter: 0.19"
Threading Diameter: M5
Spindle Speed: 200 - 6500 rpm
Backwork:
Chucking Diameter of Backwork Spindle: 5/8"
Backwork Length: 4.92"
Drilling Diameter: 0.19"
Threading Diameter: M5
Backwork Spindle Speed: 250 - 6000 rpm
Spindle Indexing: Full C-Axis
Equipped With:
Iemca Bar Loader
Cool Blaster High Pressure Unit
 
  60
IDMA34379
MakeSchaublin,Swiss
Model110CNC
YOM1997
ConditionGood Condition
PhotoSee Photo
There are 2 such machines available.
Swing over support - 115mm
Center distance - 300mm
Weight - 2100kg
Control: Fanuc
 
  61
IDMA34374
MakeTornos
ModelDeco 13
YOM2003
ConditionGood Condition
PhotoSee Photo
Power main spindle 3,7 Kw
Main spindle bar diameter 13 - 16 mm
sliding headstock travel (Z1) 180 mm
Main spindle RPM 12000
Number of linear axes 10
Number of fixed tools Tool holder plate 4
Number of driven tools Tool holder plate 6
High coolant pressure yes
Pressure value 20 bar
System with external tank with filter yes
Number of toolholders turrets/slides 1
Number tool posts on the 1th turret/slide 7
Number of fixed tool posts on the 1th turret/slide 4
Number of driven tool posts on the 1th turret/slide 3
Subspindle yes
Sub spindle RPM 12000
Subspindle power 2,2 Kw
Bar diameter 13 mm
Number of Back fixed tool posts 6
Number of Back driven tool posts 6
Coolant used whole oil
Barfeeder model and brand LNS Alpha 3T320
 
  62
IDMA34372
MakeGILDEMEISTER
ModelCTX400
YOM1998
ConditionGood Condition
PhotoSee Photo
2 machines available
Diameter of rotation above the bench: 570 mm
Diameter of rotation above the carriage: 420 mm
Cross travel: 220 mm
Longitudinal stroke: 635 mm
Spindle bore diameter: 79 mm
Chuck diameter: 220/250 mm
Power: 21 kw
Max torque: 240 N / M
Spindle speed: 25-5000 rpm
X axis rapid travel speed: 20 m / min
Z axis rapid travel speed: 24 m / min
Turret: 12 VDI 30 positions
Automatic tailstock
Diameter 80 mm

Equipment included with the machine:
Advanced against
Parts collector
Chip conveyor
 
  63
IDMA34311
MakeDoosan
ModelPumaV400
YOM2012
ConditionGood Condition
PhotoSee Photo
SPINDLE SPEED:3000 RPM
SPINDLE MOTOR:30 HP
X-AXIS TRAVEL:10.6"
RAPID RATE X AXIS:787 IPM
Z-AXIS TRAVEL:19.2"
RAPID RATE Z AXIS:787 IPM
MAX TURNING LENGTH:18.1"
MAX TURNING DIAMETER:19.5"
TURRET TOOLING 12 Station
MAX SWING:24"
OPTIONS / EQUIPPED WITH
FANUC I CHIP CONVEYOR
NO CHUCK
Quantity: 3nos
 
  64
IDMA34297
MakeO-M
ModelTDC16N
YOM1997
ConditionGood Condition
PhotoSee Photo
Fanuc-18T /T:φ1600 /2 pallet /max work Dia φ2000 /Height 1275 /Ram up-down (Z)900 /table index 0.001 degree / Cutting tools 12/ ATC 24
 
  65
IDMA34287
MakeHyundai
ModelWIA-L400LC
YOMNew 2014
ConditionGood Condition
PhotoSee Photo
Swing Over Bed:723.90mm
Swing Over Carriage:535.94mm
Max. Turning Diameter:558.80mm
Max. Turning Length: 2100.58mm
Bar Capacity: 116.84mm
Spindle Bore: 129.54mm
Spindle Speed:2000 RPM
Spindle Motor:36.54 kw
Spindle Nose: A2-11
X-Axis Travel:320.04mm
Z-Axis Travel:2199.64mm
Rapid Traverse Rate: 333.16 mm/sec
Slide Type: Box Guide
Tool Size, OD / ID: 30.48mm / 63.50mm
Turret Indexing Time: 0.2 sec.
Tailstock Taper: MT #5
Quill Diameter: 149.86mm
Quill Travel: 132.08mm
EQUIPPED WITH:
Fanuc 32iA CNC Control
381.00mm Samchully Hydraulic Chuck
SMW Hydraulic Steady Rest
Tool Setter
Chip Conveyor
 
  66
IDMA34255
MakeOkuma,Japan
ModelL1420
YOM1997
ConditionGood Condition
PhotoSee Photo
Control Type OSP-700L/IGF
Swing:14.17″
Spindle:3200 RPM
Chuck:12″
Equipped With Chip Conveyor
IGF Programming
 
  67
IDMA34254
MakeHyundai
ModelWIA3100LSMA
YOM2019
ConditionGood Condition
PhotoSee Photo
Control Type Fanuc I-Series
Swing:29.5″
Length:49.2″
Spindle:3500 RPM & 4000 RPM
Rotary Speed 4000 RPM
Chucks 12″ & 8″
Equipped With Chip Conveyor
Fanuc Robot Interface
I/O Extension
Auto Door
20 Bar Coolant Pressure
Air Blow Thru Spindle
Coolant Thru Drill Holder
 
  68
IDMA34252
MakeMazak,Japan
ModelSlant50
YOM1997
ConditionGood Condition
PhotoSee Photo
Control Type Mazatrol T-Plus
Swing:31.7″
Machining Length 120″
Spindle Speed:1600 RPM
Chuck:20″
Equipped With;Chip Conveyor
 
  69
IDMA34251
MakeMazak,Japan
ModelE1060V-8/II
YOM2007
ConditionGood Condition
PhotoSee Photo
Control Type Mazatrol Matrix
Table:39.4″ Diameter
Travels:73.82″ x 41.72″ x 52.95″
Swing:49.2″
Spindle Speed:500 RPM
Rotary Speed 10,000 RPM
Equipped With:120 ATC
Coolant Thru Spindle (1000PSI)
EIA/ISO Input Function
EIA Simultaneous 5-Axis
Manual Pulse Generator
Tool Eye
Re-Threading
Thread Start Point Compensation
Chip Conveyor
 
  70
IDMA34250
MakeDoosan
ModelPUMA240B
YOM2006
ConditionGood Condition
PhotoSee Photo
Control Type Fanuc 21T
Swing:21.7″
Spindle Speed:4500 RPM
Chuck:8″
Equipped With:Touchsetter
Chip Conveyor
 
  71
IDMA34242
MakeIkegai,Japan
ModelTU30
YOM1997
ConditionGood Condition
PhotoSee Photo
Fanuc 18T control
Swing Diameter 25"
Center Distance 40"
Chuck 15" 3 Jaw Hydraulic Chuck
Spindle Nose A2-8
Spindle Bore 4"
Bar Capacity 3.5"
Spindle Speed 3000 RPM
HP 35
Turret Positions 12
Equipped With:
Chip Conveyor
 
  72
IDMA34241
MakeSunfirm
Model
YOM2006
ConditionGood Condition
PhotoSee Photo
Bed Width 26"
Distance Between Centers 160"
Gap Width 22"
Max Swing Over Bed / Carriage / Gap 42" / 27" / 55"
Rapid Traverse Rates (X / Z) 393 / 315 IPM
Spindle Bore 7"
Spindle Motor 35 / 30 HP
Tailstock Taper MT#6
Tools 8
X-Axis Travel 26"
Features:
Fanuc 0i-TC CNC Control
7" Color LCD
Manual 24" 4-Jaw Chuck
(8) Position Turret
Manual Tailstock
Chip Conveyor
Spindle Chiller Unit
 
  73
IDMA34240
MakeWMW
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Siemens sinumerik 3 control
13" 3 jaw hyd chuck
Turn dia 480mm
Swing 495mm
Center distance 1500mm
Max turning length 1250mm
Spindle bore 90mm
Weight 8 tons
 
  74
IDMA34239
MakeOkuma,Japan
ModelGENOS L250e
YOM2013
ConditionGood Condition
PhotoSee Photo  |  See Video
OKUMA OSP-P200LA-R CONTROL
SWING OVER BED ………………………… 17.72″
SWING OVER CARRIAGE…………………13.78″
SWING OVER CROSS SLIDE …………………. 11.81″
MAX. TWORK LENGTH........................... 19.6″
X-AXIS TRAVEL …………………………. 6.299″
Z-AXIS TRAVEL …………………………. 18.504″
RAPID TRAVERSE X/Z …………………….. 787/984 IPM
SPINDLE NOSE ………………………….. JIS A2-6
SPINDLE BORE ………………………….. 2.59″
SPINDLE SPEEDS ………………………… 4500 RPM
SPINDLE MOTOR …………………… 14.75 HP / 30 MINUTE
TURRET CONFIGURATION …………………… 12 STATION
TURRET INDEXING TIME …………………… .3 SECONDS
OD TOOL SHANK …………………………. 1″
TAILSTOCK QUILL DIAMETER ……………….. 3.54″
TAILSTOCK TAPERED BORE …………………. MT#5
QUILL TRAVEL ………………………….. 3.94″
MACHINE DIMENSIONS …………… 109″ X 61″ X 62″ TALL
MACHINE WEIGHT ……………….8,377 LBS
 
  75
IDMA34231
MakeMiyano
ModelBNC34S
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
Fanuc OT CNC Control with CRT, RS232 Spindle Load
Meter, 6 Station Turret, Sub-Spindle,
Heavy Duty Slant Bed Construction,
Max Bar Capacity.......................................... 1-1/4"
Max Swing over the Cross Slide............................ 10.62"
Max Length Spindle Nose to Spindle Nose........... 20"
Max Turning Diameter...................................... 4-3/4"
Cross Travel (X-Axis)..................................... 3-7/8"
Longitudinal Travel (Z-Axis).............................. 11-3/8"
Number of Turrets......................................... 1
Turret Positions.......................................... 6
Spindle Speed Range....................................... 170-5000 RPM
Sub-Spindle Speed Range................................... 170-5000 RPM
Spindle Drive Motor....................................... 10 HP
Approximate Machine Dimension(w/o Barfeeder).............. 59" x 100"
Approximate Machine Height................................ 67"
Approximate Machine Weight................................ 6,200 LBS
(4) machines are available, 3 of them are pictured
 
  76
IDMI7630
MakeGlobal
ModelSinwey-2575
YOM21/08/2019
ConditionExcellent
PhotoSee Photo
Chuck dia : 250mm
between centre : 700mm
control :fanuc tf
input voltage : 415 volts
input power : 19kw
spindle power : 12kw
machine weight : 3900 kg
 
  77
IDMA34220
MakeHernualt toyado
ModelHES52
YOM1990
ConditionGood Condition
PhotoSee Photo
NUM 750
Turret: 12 tools
Distance between centers: 1150
Diameter on bench: 650
Diameter on carriage: 540
Spindle diameter: 80
Spindle speed: 4000 rpm
With tools
 
  78
IDMI7614
MakeHaas
ModelSL10
YOM2012
ConditionGood Condition
PhotoSee Photo
CONTROL: HAAS CNC
MAX SWING OVER BED: 16.25"
MAX SWNG OVER SADDLE: 8"
MAX TURNING DIAMETER: 11"
MAX TURNING LENGTH: 16"
SPINDLE SPEEDS: 6,000 MAX RPM
HOLE THRU SPINDLE: 2.31"
SPINDLE NOSE: A2-5
HOLE THRU DRAW TUBE: 1.81"
 
  79
IDMA34181
MakeALPHA
Model1550XS
YOM2018
ConditionGood Condition
PhotoSee Photo
Capacity:
Height of centres 280mm
Distance between centres 2000mm
Swing over bed 554mm
Swing in gap 830mm
Gap width from face plate216mm
Swing over cross-slide 370mm
Spindle bore 104mm
Spindle nose Camlock D1-11
Taper in Nose bush No.5 MT
Spindle speed ranges (11-224 rpm) (1-672 rpm) (1-2000 rpm)
Spindle motor S3 – 40% 15kW (15.0 hp)
Constant power range 64 – 1970 (7.5kW)
X-axis Working Stroke 296mm
Width over bed ways 400mm
Cross-slide travel 310mm
Tailstock quill diameter 95mm
Tailstock quill travel 145mm
Tailstock quill taper quill No. 6 MT
Complete With:
Fanuc 0iTD Controller
3 & 4 Jaw Chuck
3 Point Steady
Quick Change Tool post
Manuals
Toolholders
 
  80
IDMI7576
MakeBernardi
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck : 300mm Center height : 300mm Swing; 600mm Admit ; 1200mm 6 stations turret Fanuc OT ( Alpha drives) Coolant, books , fully running
 
  81
IDMI7575
MakeDean Smith & Grace
ModelCNC2817x90
YOM
ConditionGood Condition
PhotoSee Photo
Phillips 3000 series CNC Control Swing over bed 710mm (28?) Swing over saddle 430mm (17?) Spindle speeds 40 ? 2200 rpm Main spindle motor 35hp (26kw) Spindle bore 92mm Di
 
  82
IDMI7574
MakeOkuma,Japan
ModelLC30
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size: 400mm Swing: 650mm Admit between : 1200mm okuma control
 
  83
IDMI7567
MakeBiglia
Model11S3CNC
YOM
ConditionGood Condition
PhotoSee Photo
chuck Admit; 400mm Fanuc Ot
 
  84
IDMI7566
MakeDaewoo
ModelPuma8UHS
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc OT Chuck : 200mm
 
  85
IDMI7565
MakeGiana,Italy
Model610CNC
YOM
ConditionGood Condition
PhotoSee Photo
Chuck: 400mm Swing: 700mm Admit : 1500mm 12 station Turret. (With new FANUC control of following specifications) FANUC OI TF new control with 3 year warrantee from FANUC (22
 
  86
IDMI7542
MakeHeyligenstaedt
Model
YOM1998/2019
ConditionGood Condition
PhotoSee Photo  |  See Video
Max. Swing : 1120mm
Max. Swing over Carriage : 960mm
Between Centre : 3000mm
Fanuc OiTF Control ( New Control with company Warranty, Oct.2019 )
650mm 3Jaw Chuck
Chip Conveyor
 
  87
IDMI7537
MakeDaewoo
ModelPuma6s
YOM1995
ConditionGood Condition
PhotoSee Photo  |  See Video
Control : Fanuc OTC
Chuck Size : 165mm
Max. Turning Dia : 320mm
Swing Over Bed : 500mm
Between Centre : 450mm
Spindle Speed : 60-6000 RPM
Spindle Nose : A2-5
Tool Turret : 12nos
Machine Dimensions : 91"x59"x64"
Machine Weight : 8,140 lbs.
 
  88
IDMI7506
MakeDoosan
Model--
YOM2008
ConditionGood Condition
PhotoSee Photo  |  See Video
Fanuc
200 dia chuck
12 tool turret
40 dia boring holder
With tailstock
Bar capacity 45.0mm
Its now workibg 31.05 to 31.06 id tolerance
 
  89
IDMI7454
MakeMori Seiki
ModelFRONTIER L
YOM1998
ConditionGood Condition
PhotoSee Photo
Control : Fanuc MSC521
Chuck Size : 200mm
Between Centre : 500mm
 
  90
IDMA34006
MakeMazak,Japan
ModelQT15N
YOM1996
ConditionGood Condition
PhotoSee Photo  |  See Video
Control:MAZATROL T32-2
XZ travel:180x510mm
Distance between centres:500mm
Spindle bore:50mm
3-jaw chuck:205mm
Spindle speed:4800rpm
 
  91
IDMA34005
MakeMazak,Japan
ModelQT28N
YOM
ConditionGood Condition
PhotoSee Photo
Control: MAZATROL T32-2
XZ travel:200x1020mm
Max. turning length:1010mm
3-jaw chuck:250mm
Toolchanger:8atc
Spindle bore:70mm
 
  92
IDMA34004
MakeMazak,Japan
ModelSQT200MS
YOM2002
ConditionGood Condition
PhotoSee Photo
Control: MAZATROL 640T
Max. turning length:535mm
3-jaw chuck:160mm
Spindle bore:60mm
Toolchanger:16atc
With bar loader
 
  93
IDMA33992
MakeMazak,Japan
ModelSQT200M
YOM1999
ConditionGood Condition
PhotoSee Photo
CHUCK SIZE:8" Hydraulic
SPINDLE BORE:2.40"
SPINDLE NOSE:A2-6"
TURRET TYPE :12 Position
ROTARY TOOL SPINDLE:5 HP
ROTARY TOOL SPEED:4,500 RPM
SPINDLE MOTOR:25 HP
RAPID TRAVERSE RATES:1180 IPM
X-AXIS TRAVEL:7.48"
Z-AXIS TRAVEL:22.64"
MAX CUTTING DIAMETER:11.8"
SWING OVER CARRIAGE:13.8"
MAX SWING:20.6"
TAILSTOCK QUILL DIA. / CENTER:3.15" / #5 MT
Control:Mazatrol 640T
Options/Equipped With
FULL C AXIS SPINDLE ROTATION
LIVE MILLING/DRILLING CAPABILITY
AUTOMATIC TOOL EYE
8" 3 JAW HYDRAULIC CHUCK
PROGRAMMABLE TAILSTOCK
PARTS CATCHER
COOLANT SYSTEM WITH TANK & PUMP
HYDRAULIC UNIT
ALL AVAILABLE TOOLING
ALL AVAILABLE MANUALS
 
  94
IDMA33988
MakeMazak,Japan
ModelQT10
YOM1985
ConditionGood Condition
PhotoSee Photo
CNC Mazatrol CAM T12- Lenght work mm 510- diametr in rotation mm 510-diametr work mm 300
N° TOOLS 8rpm 3600-spindle hool mm 56-
 
  95
IDMA33983
MakePoreba Poland
ModelTHC50X3000
YOM
ConditionGood Condition
PhotoSee Photo
Max. turning diameter over bed: 720 mm
Max. turning diameter over the cross slide: 520 mm
Working length: 3000 mm
Center height: 375 mm
Max. weight of workpiece: 8000 kg
Chuck diameter: 500 mm
Spindle bore: 70 mm
Main motor power 30 kW
 
  96
IDMI7439
MakeMacpower
ModelVX200Super
YOM2016
ConditionGood Condition
PhotoSee Photo
200/500
 
  97
IDMA33979
MakeHass
ModelSL20
YOM
ConditionGood Condition
PhotoSee Photo
lenght work mm 610-diametr in rotation 390-diametr work mm 242-Diameter chuck mm 203
rpm 4000- spindle hool mm 52-N° TOOLS 10
 
  98
IDMA33977
MakeBiglia
ModelB550
YOM2004
ConditionGood Condition
PhotoSee Photo
CNC Fanuc 18T- Lenght work mm 560-Diametr in rotation mm 580- diameter work mm 300
Spindle hool mm 65 -Kw 22- rpm 4000- n° tools 12-diameter chuck mm 250
 
  99
IDMA33976
MakeBiglia
ModelB550M
YOM1995
ConditionGood Condition
PhotoSee Photo
CNC Fanuc- Lenght work mm 500- Diametr work mm 500 -Spindle hool mm 70 rpm 4.000
 
  100
IDMA33975
MakeDoosan Daewoo
ModelPuma230
YOM
ConditionGood Condition
PhotoSee Photo
CNC Fanuc 18T- Lenght work: mm 550-Diameter rotation mm 550-Diameter work: mm 330
spindle hool mm 65 n° of tools n° 10- Hour work n° 8200 -Chip evacuator
 
  101
IDMA33953
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) 19311 - 2007 DOOSAN PUMA 300LMC-ALPHA CNC LATHE WITH C AXIS AND LIVE TOOLING
SWING OVER BED: 23"
MAXIMUM CUTTING DIAMETER: 14"
MAXIMUM CUTTING LENGTH: 53"
BAR CAPACITY: 4.00"
SPINDLE SPEEDS: 2800 RPM
SPINDLE MOTOR: 30 HP
WEIGHT (APPROXIMATE): 14,740 LBS.
EQUIPPED WITH:
FANUC 21i-TB CNC CONTROL
C AXIS
LIVE TOOLING / MILLING
3-JAW CHUCK
12 STATION TOOL TURRET
TAILSTOCK
LNS TURBO CHIP CONVEYOR

2) 19313 - 2011 DOOSAN LYNX 300 CNC LATHE
SWING OVER BED: 26"
MAXIMUM CUTTING DIAMETER: 18"
MAXIMUM CUTTING LENGTH: 30"
BAR CAPACITY: 3.00"
SPINDLE SPEEDDS: 3500 RPM
SPINDLE MOTOR: 20 HP
WEIGHT (APPROXIMATE): 6,820 LBS.
EQUIPPED WITH:
FANUC i SERIES CNC CONTROL
3-JAW CHUCK
12 STATION TOOL TURRET
TAILSTOCK
3) 19312 - 2007 DOOSAN PUMA 300C CNC LATHE
SWING OVER BED: 22"
MAXIMUM CUTTING DIAMETER: 16"
MAXIMUM CUTTING LENGTH: 25"
BAR CAPACITY: 4.00"
SPINDLE SPEEDS: 2800 RPM
WEIGHT (APPROXIMATE): 12,900 LBS.
EQUIPPED WITH:
FANUC 21i-TB CNC ONTROL
3-JAW CHUCK
12 STATION TOOL TURRET
TAILSTOCK
 
  102
IDMI7436
Make
ModelDX200-3A
YOM2018
ConditionGood Condition
PhotoSee Photo
Chuck dia: 200 mm,
Length: 300 mm,
Control: Fanuc
 
  103
IDMI7434
MakeDoosan
Model
YOM2001-2002
ConditionGood Condition
PhotoSee Photo
CHECK DIA: 200
CUTTING LENGTH :500
WITH TAIL STOCK WITH OUT STABILIZER FANUC CONTROL
 
  104
IDMI7433
MakePMT
ModelSupercut6N
YOM2011
ConditionGood Condition
PhotoSee Photo
CHECK DIA: 165
CUTTING LENGTH:300
WITH TAIL STOCK WITH OUT STABILIZER FANUC CONTROL
 
  105
IDMA33917
MakeDoosan
ModelPUMA400LB
YOM2013
ConditionGood Condition
PhotoSee Photo
Control : Fanuc
Chuck dia. : 450 mm
Spindle Speed (main/sub) : 2000 rpm
Max. Working Dia. : 550 mm
Max. Working Length : 2093 mm
Bar Capacity : 116 mm
Power on : 9136 Hrs
Run time : 2064 Hrs
Cut time : 1896 Hrs (Nov. 17, 2020)
 
  106
IDMA33912
MakeMazak,Japan
ModelMultiplex610
YOM1995
ConditionGood Condition
PhotoSee Photo
Max Swing Dia: 350 mm
Turning Dia: 150 mm
Turning Length: 150 mm
Bar Capacity Dia: 42mm
Spindle Speeds 35 – 5000 RPM
Main Motor 25/11 KW
Collet Chucks on both Spindles & Part Catchers
Short Magazine Bar Feed.
 
  107
IDMI7416
MakeMori Seiki
ModelSL45B/1500
YOM
ConditionGood Condition
PhotoSee Photo
Max turning dia: 490mm
Max turning length: 1530mm
Spindle speeds: 3-1500rpm
Hollow spindle: 104mm
Turret tool stations: 12
Control system: MSC 516 (Fanuc 16T Alpha Drives)
With Chip Conveyor, Coolant Tank & Transformer
 
  108
IDMI7413
MakeHeylingstaedt
Model
YOM
ConditionGood Condition
PhotoSee Photo
chuck : 650 mm (3 jaw )
Max. Swing : 1120mm
Max. Swing over Carriage : 960mm
Between Centre : 3000mm
system : Fanuc OiTF New Control
 
  109
IDMI7410
MakeYang
ModelML55A
YOM1998
ConditionGood Condition
PhotoSee Photo
15" power chuck
Swing over bed 720mm
Max turning dia.: 550mm
Distance between centres 1,200mm
Spindle Bore 102mm
ASA A2-8
2,000RPM spindle
Tailstock
8 station turret with holders as per photos
Swarf conveyor
Manuals
Control: Fanuc O-T
 
  110
IDMI7409
MakeYang
ModelML55A
YOM1995
ConditionGood Condition
PhotoSee Photo
15" power chuck
Swing over bed 720mm
Max turning dia.: 550mm
Distance between centres 1,200mm
Spindle Bore 102mm
ASA A2-8
2,000RPM spindle
Tailstock
8 station turret with holders as per photos
Swarf conveyor
Manuals
Control: Fanuc O-T
 
  111
IDMI7395
MakeJyoti,India
ModelDX200
YOM2011
ConditionGood Condition
PhotoSee Photo  |  See Video
CONTROL – SEIMENS 802D
MAX TURNING DIA – 300 MM
SWING OVER BED - 500 MM
CROSS (X-AXIS) TRAVEL – 200 MM
LONGITUDINAL (Z-AXIS) TRAVEL – 500 MM
RAPID FEED (X&Z AXIS) – 24 M/MIN
SPINDLE BORE – 70 MM
SPEED RANGE – 50-3500 RPM
SPINDLE MOTOR POWER – 9/11 KW
 
  112
IDMI7394
MakeJoyti
ModelTMC250
YOM2012
ConditionGood Condition
PhotoSee Photo  |  See Video
CONTROL – SIEMENS 828D
SWING OVER BED – 600 MM
MAX TURNING DIA – 480 MM
MAX TURNING LENGTH – 700 MM
X-AXIS TRAVEL (CROSS) – 250 MM
Z-AXIS TRAVEL (LONGITUDINAL) - 700 MM
RAPID FEED (X&Z AXIS) – 24 M/MIN
SPINDLE MOTOR POWER (SIEMENS)– 15/11KW
SPINDLE SPEED – 50-2500 RPM
SPINDLE NOSE – A2-8
 
  113
IDMI7393
MakeStar
ModelSST16
YOM
ConditionGood Condition
PhotoSee Photo
CNC CONTROL – FANUC OTT
MAX TURNING DIA – 16 MM
MAX HEADSTOCK STROKE IN ONE CHUCKING –
305 MM
MAX DRILLING DIA – 8 MM
MAX MILLING DIA – 10 MM
MAX SLOTTING CAPACITY – 1.5X4 MM
SPINDLE SPEED – 500-10000 RPM
SPINDLE INDEXING – 15 DEGREE
MAIN SPINDLE MOTOR – 2.2/3.7 KW
NO. OF TOOLS – 9
ROTARY TOOLS – 2
ROTARY TOOL SPEED – 350-5000 RPM
 
  114
IDMI7392
MakeMori Seiki
ModelZL25
YOM1988
Condition
PhotoSee Photo
SWING OVER BED – 520 MM
SWING OVER CROSS SLIDE – 360 MM
DISTANCE BETWEEN CENTRES – 645 MM
MAX MACHINING LENGTH – 550 MM
SPINDLE SPEED – 42-4200 RPM
 
  115
IDMA33864
MakeHaas
ModelST45L
YOM2019
ConditionGood Condition
PhotoSee Photo
Hours: 5
Max. Swing: 34.5" (876 mm)
Max. Turning Diameter: 25.5”
Max. Turning Length: 80”
Spindle Bore: 7.0" (178 mm)
Motor: 40 hp (30 kW)
Max. RPM: 1400 rpm, 2-speed gearbox
- Spindle: A2-11
- Tool Positions: 12-station turret
- Programmable tailstock
- 15" color LCD monitor
- USB port,
- Color remote jog handle and rigid tapping.
- High-Pressure Coolant, 1000 psi (69 bar)
- Automatic Tool Presetter
- Belt-Type Chip Conveyor
- High-Intensity Lighting
- 18" (457 mm) 3-Jaw Chuck
- 6.5" (165 mm) draw tube thru-hole
 
  116
IDMA33846
MakeHaas
ModelHL2
YOM1998
ConditionGood Condition
PhotoSee Photo
Max Swing Over Bed............................................... 20"
Max Swing Over Carriage........................................ 9.5"
Max Machinable Center Distance............................ 24"
Max Distance Between Centers............................... 20"
Standard Chuck Size............................................... 8"
Cross Travel (X-Axis)............................................... 8.45"
Longitudinal Travel (Z-Axis)..................................... 20"
Rapid Traverse Rates.............................................. 400 IPM
Number of Turrets.................................................... 1
Tool Positions........................................................... 10 Total
Spindle Bore............................................................. 3"
Bar Capacity............................................................. 2"
Spindle Nose............................................................ A-6
Spindle Speed Range (Maximum)........................... 3750 RPM
Spindle Horsepower................................................. 15 HP
Electrics.................................................................... 208/230/3/60
Approximate Dimensions......................................... 126" x 70"
Approximate Height.................................................. 70"
Approximate Machine Weight.................................. 9,000 LBS

EQUIPPED WITH:
Haas CNC Control, Collet Chuck and 8" 3-Jaw Power Chuck,
RS-232 Port, 3-1/2" Floppy Drive, 10 Position Turret,
Tool Setter, Programmable Tailstock, Coolant
System and Auger, Tooling.
 
  117
IDMA33819
MakeCitizen
ModelM12
YOM1999
ConditionGood Condition
PhotoSee Photo
Control:CINCOM
9-axis
Number of c-axis:2
Turning diameter:14mm
Counter-spindle diameter max.:12mm
Turning length:200mm
Max. spindle speed:12000rpm
Spindle power:2.2kW
Toolchanger:10atc
Machine weight:2200kg
With LNS TRYTON bar loader
12bars 7mm capacity
12bars 13mm capacity
With parts conveyor
With DONALDSON oil mist collector installed in 2004
Equiped with automatic firetrace-fire suppression system
Complete with automatic tool breakage monitoring
 
  118
IDMA33799
MakeHasegawa
ModelTUP25M
YOM
ConditionGood Condition
PhotoSee Photo
Control: FANUC 21TB,
Multisam Bar Loader,
Accesories,
With much tooling,
Spindle indexing every 7.5 degrees.
 
  119
IDMA33781
MakeHitachi Seiki
ModelHitec Turn Seiki 23RIII-S
YOM2000
ConditionGood Condition
PhotoSee Photo
Magazine: Bar loader
 
  120
IDMA33778
MakeHarrison
ModelAlpha1550U
YOM2006
ConditionVery good condition
PhotoSee Photo
Swing over Bed 560mm Dia
Cutting Dia 554mm
Bed Length 1500mm
Spindle Bore 90mm Dia
Spindle Speed 15 – 1800 RPM
Spindle Motor 11KW
GE Fanuc 1000 CNC Controls
3 Jaw Chuck , 8 Station Turret, Turret Toolholders.
 
  121
IDMA33751
MakeGildemeister,Germany
ModelSprint65
YOM2007
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 310i,
Complete with bar feeder and tooling
 
  122
IDMA33744
MakeTornos
ModelCT20
YOM2019
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 01-TD,
Axis: 5 Linear & 2 C-Axis,
Main Spindle:-
Maximum bar diameter: 20mm,
Standard work piece length with guide bush: 210mm,
Maximum spindle speed: 10000 rpm,
Spindle power: 2.2 kW,
C-Axis,
Counter Spindle:-
Maximum bar diameter: 20mm,
Maximum parts length (without rear discharge): 80mm,
Maximum spindle speed: 8000 rpm,
Spindle power: 1.5 kW,
C-Axis,
TISIS tool management software,
Mist Extraction,
Robobar SBF-326 Magazine Barfeed,
Tooling to be confirmed.
Machine dimensions (LxDxH): 2050 x 1270 x 1670mm,
Machine weight: 2400 kg,
 
  123
IDMA33732
MakeHessapp
ModelDVH450E
YOM2008
ConditionGood Condition
PhotoSee Photo
Maximum turning diameter: 450
Turret: 12 rotating tools
14 pallets diameter: 450
Spindle diameter: 155
Vertical and horizontal strokes: 450 x 450
Chip conveyor and collector
Spindle speeds: 4000 rpm
FANUC 21i TB
 
  124
IDMA33709
MakeDainichi
ModelMR65-8000
YOM1990
ConditionGood Condition
PhotoSee Photo
Fanuc 6 T old model
With two hydraulic steady rest
 
  125
IDMA33647
MakeCitizen
ModelM32V
YOM2011
ConditionGood Condition
PhotoSee Photo
- Number of axes : 9
- Number of spindles : 2
MAIN SPINDLE
- Max. bar diameter : 32 [mm]
- Max. machining length : 320 [mm]
- Travel : 325 [mm]
- Spindle speeds : 8000 [rpm]
- Spindle power : 3.7/7.5 [kW]
- C axis indexing precision : 0.001 [°]
COUNTER-SPINDLE
- Max. bar diameter : 32 [mm]
- Z stroke : 410 [mm]
- X stroke : 238 [mm]
- Spindle speeds : 7000 [rpm]
- Spindle power : 1.5/3.7 [kW]
- C axis indexing precision : 0.001 [°]
- Number of turrets : 1
LOWER TURRET
- Number of positions : 20
- Number of motorized positions : 10
- X/Z stroke : 120/202 [mm]
- Y stroke : 44 [mm]
- Live tools speed : 5000 [rpm]
GUIDE BUSH HOLDER
- Number of positions : 9
- Number of motorized positions : 4
- Live tools speed : 5000 [rpm]
- X/Y stroke : 108/275 [mm]
SECONDARY OPERATION
- Number of positions : 3
POWER SUPPLY
- Supply voltage : 380 [V]
- Total installed power : 10 [kVA]
- Machine floor space : 2805 x1370 [mm]
- Machine height : 1370 [mm]
- Machine weight : 3970 [kg]
EQUIPMENT
- CNC : Mitsubishi MELDAS M635
- 3 colors status lamp
- Rotating guide bush
- Parts catcher
- Parts conveying strip
- Chips conveyor : COMBISTREAM
- Coolant tank : COMBILOOP [l]
* with high-pressure pump : 15 [bars]
- Predisposition for barfeeder
- Oil mist extractor : ELBARON
- Electric transformer : 400V
 
  126
IDMI7300
MakeBiglia
ModelB.500/SM
YOM
ConditionGood Condition
PhotoSee Photo
Control : FANUC 0-T
Turning length : 500 mm
Turning diameter : 520 mm.
X-axis : 225 mm.
Z-axis : 510 mm.
Spindle taper : ASA 6.
Spindle bore : 80 mm.
Turning speed : 4000 rpm.
Approx. weight of the machine : 4200 Kg.
 
  127
IDMA33500
MakeNakamura
ModelWT 250MM
YOM2005
ConditionGood Condition
PhotoSee Photo
Swing Over Bed 16"
Turning Diameter, Shaft Diameter 15.34", 9.84",
Machining Length 17.12"
Chuck Size 1, 2 CB 65MM, CB 54MM
Spindle Nose 1, 2 A2 - 6, A2 - 6
Spindle Bore Diameter 1, 2 3.15", 3.15"
Spindle Bar Capacity 1, 2 2.56", 2.54"
Spindle Speeds 1, 2 4500, 4500 RPM
Spindle Horsepower 1, 2 35, 35 HP
X - Axis Travel 1, 2 7.67"
Z - Axis Travel 1, 2 18.9"
C - Axis Travel 1, 2 .001, .001
Rapid Traverse Rates X1, X2 472, 472 IPM
Rapid Traverse Rates Z1, Z2 945, 945 IPM
Rapid Traverse C Axis 25 RPM
Turret Configuration 1, 2 24, 24
Turret Rotary Tool Spindle Speed 1, 2 3600, 3600 RPM
Turret Rotary Tool Horse Power 1, 2 7.5, 7.5 HP
Machine Weight 19,140 LBS
Equipped with
(2) 24 POSITION TURRETS .001 C - AXIS INDEXING ON BOTH SPINDLES
ABNORMAL LOAD DETECTION AIR BAG FUNCTION BAR FEED INTERFACE
CHIP CONVEYOR FANUC 18ITB CNC CONTROL
HIGH PRESSURE COOLANT SYSTEM HIGH VOLUME COOLANT AND HIGH PRESSURE COOLANT TANKS
LNS BLAZE AIR RIGHT BAR RECEIVER LNS QUICK LOAD SERVO S3 SHORT MAGAZINE BAR FEED
MANUAL GUIDE EYE CONVERSATIONAL PROGRAMMING MICROCENTRIC CB 65MM FRONT AND SUB SPINDLE
N-T NURSE TOOL MONITOURING FUNCTION N-T TORQUE NAVIGATOR FOR PART AN DATUM POINT RECOGNITION
 
  128
IDMA33496
MakeGildemeister,Germany
ModelCTX410
YOM2006
ConditionGood Condition
PhotoSee Photo
320 x 600 mm
Bore 65 mm
12 x turret
Live tooling
C Axis
Tail stock
 
  129
IDMA33488
MakeL&L
ModelLD48
YOM2012
ConditionGood Condition
PhotoSee Photo
Swing over bed: 1220 mm.
Swing over cross slide: 670 mm.
Distance between centres: 3000 mm.
Spindle Bore: 153 mm.
Width of bed: 610 mm.
Tail stock taper MT6.
Motor Fanuc 30/37 Kw.
Fanuc 0i-TD Control.
625 mm dia. Front & Rear 4 Jaw Chucks.
3 x Steadies .
Rotary Front V8 Toolpost.
Rear H 6 Toolpost.
 
  130
IDMA33465
MakeMori Seiki
ModelZT2500Y
YOM2005
ConditionGood Condition
PhotoSee Photo
Make - Mori Seiki
Model-ZT2500Y
Specifications:
Max. Swing Over Bed: 27.7"
Max. Swing Over Cross Slide: 16.5"
Max. Distance Between Centers: 51.2"
Max. Turning Diameter: 15.3" (Main) / 14.1" (Secondary)
Standard Turning Diameter: 10.2"
Max. Turning Length: 13.7"
Spindle Speeds: 40 - 4000 RPM
Spindle Motor (30 Min. / Continuous): 30 / 25 HP
Spindle Through Hole: 3.5"
Subspindle Travel: 38"
C-Axis Indexing: .001°
Spindle Bearing Inner Diameter: 5.1"
Rotary Tool Spindle Speed: 4,000 RPM
X-Axis Travel (Turret 1 / Turret 2): 11" / 7.9"
Y-Axis Travel (Upper Turret Only): +/- 2.8"
Z-Axis Travel (Turret 1 & Turret 2): 37.8"
Equipped With:
Fanuc MSC-501 CNC Control
Live Milling
LNS Hydro Sprint Bar Loader
LNS Blaze Air Unloader
(1) 12-Position Upper Turret
(1) 12-Position Lower Turret
(6) Live Tools Included
Mayfran Chip Conveyor
Chip Blaster
Transformer
Mist Buster
 
  131
IDMA33449
MakeTraub
ModelTNA500
YOM1996
ConditionGood Condition
PhotoSee Photo
Control: TX 8F
• 1x jaw chuck 315 mm bore 85 mm
• 2 sets of jaws
• tailstock
• chip conveyor
• 88100 operating hours
• Push coolant system
• operating tool
• Bezel 35-240 mm
Technical details:
Turning diameter 680 mm
Center distance 1000 mm
Spindle speed 2800 rpm.
Spindle bore 80 mm
 
  132
IDMA33447
MakeBiglia
ModelB600
YOM1993
ConditionGood Condition
PhotoSee Photo
Cnc : FANUC 15T
Maximum piece Ψ : 355 mm
Max. rotating diameter : 560 mm
Maximum length of the piece : 650 mm
Spindle revolutions : 3200 rpm
Spindlebore : 56 mm
Turret : 12 station
Dimension : 4,1x1,7x1,75 mt.
Weight : 5500 Kg
cad system for self-programming
 
  133
IDMA33446
MakeOkuma,Japan
ModelLB15 II
YOM1992
ConditionGood Condition
PhotoSee Photo
Cnc : FANUC OSP 5020L
Maximum piece Ψ : 530mm
Maximum length of the piece : 500 mm
Spindle diameter : 100 mm
Spindle revolutions : 4500 rpm
Spindle bore : 62 mm
Turret : 12 station
Hours to work : about 30.000
Accessories : Yes
 
  134
IDMA33445
MakeNakamura
ModelTMC4
YOM1988
ConditionGood Condition
PhotoSee Photo
Cnc : FANUC 6T
Maximum piece Ψ : 560mm
Maximum length of the piece : 675 mm
Spindlebore : 65mm
Spindle revolutions : 42-3000 rpm
 
  135
IDMI7259
MakeDorries Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Turning dia: 1260 mm,
Height: 895 mm,
Swing: 1400 mm,
Table dia: 1260 mm,
Cross rail adjustment: 1000 ,
Load capacity: 58 ton
 
  136
IDMI7258
MakeMori Seiki
ModelSL7M/C
YOM
ConditionGood Condition
PhotoSee Photo
Turning dia: 700
Dia x 1600 mm Length between center,
Swing over bed: 800 mm,
Swing over cross slide:600 mm,
Center height: 400 mm,
Spindle range: 10-1800 rpm
 
  137
IDMI7257
MakeMori Seiki
Model
YOM
ConditionGood Condition
PhotoSee Photo
Turning dia: 525, Dia x 90 mm turning height
Swing over cross: slide: 325 mm,
Height of center: 300 mm,
Spindle bore: 85 mm,
Speed range of spindle: 40-1000 rpm,
 
  138
IDMI7255
MakeMonfort,Germany
ModelRNC
YOM
ConditionGood Condition
PhotoSee Photo
Turning dia: 275 mm,
Length between center; 1270 mm,
Height of center: 220 mm,
Swing over cross slide: 280 mm,
Swing over bed: 375 mm,
 
  139
IDMI7254
MakeMonfort,Germany
ModelFNC600
YOM
ConditionGood Condition
PhotoSee Photo
Turning dia: 575 mm,
Swing over bed: 600 mm,
Swing over cross slide: 400 mm
 
  140
IDMI7253
MakeGerman
Model
YOM
ConditionGood Condition
PhotoSee Photo
ravers Burg machine
Turning dia: 950 mm,
turning dia over cross slide: 950 mm
 
  141
IDMI7251
MakeMonfort,Germany
ModelFNC600
YOM
ConditionGood Condition
PhotoSee Photo
Turning dia: 575 mm,
Swing over bed: 600 mm,
Swing over cross slide: 400 mm
 
  142
IDMA33410
MakeMazak,Japan
ModelIntegrex 300-II SY
YOM2002
ConditionGood Condition
PhotoSee Photo
Control : Mazatrol Fusion 640 MT Control
Turning ψ 610 mm
Max. swing over bed 610 mm
Spindle speeds 35 - 3500 rpm
Max.turning length 1080 mm
Spindle nose A 2-8
Main Spindle C-Axis 0.001°
Spindle bore 88 mm
Bar capacity 76 mm
Main Spindle Motor 26/22 kW (30 min / 100%)
Subspindle Spindle speed 35 - 3500 rpm
Sub Spindle C-Axis 0.001°
Input power 22/15 kW (30 min / 100%)
Milling Spindle Speeds 15 - 10,000 rpm
B-Axis -30°/+195° (index. 0.001°)
Rapids X/Z 30/15 m/min
24 Station Tool changer
Y axis Travel +/- 125mm
L x W x H: 3600 x 5900 x 3000mm
Weight: 10300kg
 
  143
IDMA33368
MakeCraven,UK
Model
YOM
ConditionGood Condition
PhotoSee Photo
Weight of machine 526 ton
Swing over saddle 153½” (3899 mm) (now CNC 3000 m/m max) (3200 mm with cross-slide covers off)
Swing over bed 170½” (4331 mm)
Centre height 81½” (2070 mm)
Between centres * 67’(20422 mm)
sum of 2 unequal lengths * 33’6” (10211 mm)
equal lengths Max loading 85 ton (HS) 50 ton (TS) 64 ton (rollers)
Head stock face plate Dia. 11’ (3353 mm) 8 jaws
Tail stock face plate Dia. 8’ (2438 mm) 4 jaws
Tool section 3” (76 mm) dp x 2½” (63.5 mm) wide
Main motor 250 hp, 350/900 rpm/
Head stock Speeds 1st gear 0 – 12.5 rpm 2nd gear 12 – 38 rpm
Feeds Sliding Surfacing 0-2 mm
Double ended function Weight limit: 170 ton
Between ctrs: 93’ (28346 mm)
2 motors to give 500 hp
Max. travel of top slides – 35” (889 mm)
Boring bar 15’ (4572 mm) app. Reach
Steadies 20’ (508 mm) / 128” (3251 mm)
Max. weight on head stock center 85 ton
Max. weight on tailstock centre 50ton (more on tailstock dogs)
Max. revs for carbide tools 10revs/min
Headstock chuck Max. grip O/D Max. grip I/D Min. grip O/D 101” (2565 mm) 130” (3302 mm) 10” (254 mm)
Tailstock chuck Max. grip O/D Max. grip I/D Min. grip O/D Min. grip I/D 65” (1651 mm) 87” (2210 mm) 10” (254 mm) 32” (813 mm)
Bed width 14’ (4267 mm)
Machine is not under power and the CNC system is broken, the machine is ideal for reconditioning / re-build
 
  144
IDMA33366
MakeNakamura Tome,Japan
ModelTMC 5
YOM
ConditionGood Condition
PhotoSee Photo
Maximum turning diameter 635 mm
Maximum turning length 1100 mm
Through spindle bore 90 mm
Control Fanuc 6 T
Kitagawa B-18 18″ Dia 3 jaw chuck,
Tailstock,
12 Station Turret,
Turret tooling,
 
  145
IDMA33362
MakeStar
ModelKNC25
YOM
ConditionGood Condition
PhotoSee Photo
cnc: fanuc
Spindle Hole: mm 25
Complete with bar pusher
 
  146
IDMA33361
MakeStar
ModelKJR16B
YOM1990
ConditionGood Condition
PhotoSee Photo
Control YASNAC in 5 axes (X-Y-Z-C and B)
Turning diameter max 16 mm
Headstock spindle speed 300-10000 rpm
Spindle attachment Schaublin F20
Main spindle motor 2,2 kW / 3,7 kW
Turret Twin turret - number of tools 6 stations turret x 2 = 12
X-Power-driven attachment - spindle speed 225-4500 rpm
Y-Power-driven attachment - spindle speed 225-4500 rpm
B-Back working attachment - spindle speed 225-4500 rpm
3-Spindle unit ER11
C-Axes unit
Weight approx 2300 kg
Accessories
17 Tool holders
5 Tool holders motorized
1 Fire-extinguishing device CO2
Instruction book
 
  147
IDMA33360
MakeTraub
ModelKNC150
YOM
ConditionGood Condition
PhotoSee Photo
cnc: Traub Mitsubischi
Lenght work ax X: mm 250
Lenght work ax Z: mm 300
Diametr cjuck:mm 110
Spindle Hole : mm 25
Power alimentation: 380 v- 50 hz
Rpm: rpm 5.000
Power motor: kw. 7,5
N° of tools:n° 8
Complete with bar pusher
 
  148
IDMI7247
MakeHakushui MT
ModelHTL80
YOM2007
ConditionGood Condition
PhotoSee Photo
Maximum Swing : 480mm
Standard Turning diameter : 216mm
Maximum Turning diameter : 320mm
Maximum Turning length : 520mm
Travel :
X axis travel 180mm
z axis travel 530mm
 
  149
IDMI7243
MakeLokesh
ModelVML 50
YOM
ConditionGood Condition
PhotoSee Photo
ControllerSiemens802D
Tablesize : 800x400mm
X : 650 mm
Y : 400 mm
Z : 400 mm
Atc20tools,Bt40,spindle rpm8000.with staplazer
 
  150
IDMI7242
Make
ModelACE LT20
YOM
ConditionGood Condition
PhotoSee Photo
2018 Full Reconditioned
Chuck Dia : 200 MM
ABC : 550 MM
Control : Siemens 828 D
 
  151
IDMI7241
MakeHitachi Seiki
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Dai : 250 MM
ABC LENGTH : 500 MM
Control : Fanuc 10T
With Stabilizer , Tooling , Manual's , Chip Conveyor
 
  152
IDMA33291
MakeTakisawa,Japan
ModelTS 400YS
YOM2016
ConditionGood Condition
PhotoSee Photo
• 5-axis lathe with driven tools, with counterspindle
• 82 mm spindle bore
• Chuck diameter 250 mm
• Length 750 mm
• Spindle speed 4200/6000 rpm.
Accessories:
• Rotary holder one-sided - 2 pcs - 750, - € / pcs
• Knife holder - 7 pcs - 200, - € / pcs
• Drill holder - 3 pcs - 150, - € / pcs
• Collet holder - 1 pc - 1100, - € / pcs
• Collets - 10 pcs - 80, - € / pcs
• Rotary holder perpendicular - 2 pcs - 930, - € / pcs
• Holder holder - 18 pcs - 10, - € / pcs
• Small collet holder - 1 pc - 95, - € / pc
• Large collet holder - 1 pc - 95, - € / pc
• Chuck jaws - 15 sets - 9, - € / set
 
  153
IDMA33219
MakeDoosan
ModelS280N
YOM2004
ConditionGood Condition
PhotoSee Photo
with Fanuc 0iT Control, 200 mm 3 Jaw chuck, Tail Stock, 280 mm max machining diameter, 420 mm between centres, 10-Station Turret, Quick Tool Setter, 2 Jaw Chuck, Tooling, Manuals, Jaws, Swarf Conveyor
 
  154
IDMA33124
MakeGildemeister,Germany
ModelCTX400
YOM1995
ConditionGood Condition
PhotoSee Photo
Swing diameter: 500 mm
Centre distance: 640 mm
Control: Gildemeister EPL 2
Plan path: 212 mm
Chuck diameter: 200 mm
Speed: 1-4000 rpm
Connection: 380V/ 7,5 KW
 
  155
IDMA33123
Make
Model
YOM2013
ConditionGood Condition
PhotoSee Photo
Capacity : Max.swing dia.over bed mm Φ400
Max.swing dia.over carriage mm Φ260
Recmd turning dia./length mmΦ165/400
Max.turning length mmΦ285
Max.bar diameter mmΦ42
Spindle : Hyd.chuck dia. mmΦ165
Type of spindlen nose A2-5(GB/T5900.1)
Spindle bore diameter mm Φ 57
Bearing dia.(front/rear) mm Φ90/Φ80
Spindle speed r/min 70-3000
Spindle motor power kW 7.5
Tailstock : Quill diameter/travel mm Φ70/80
Quill taper MT No. 4
Carriage : Slant angle DEG 45 °
X/Z travel mm 165/410
X/Z rapid traverse rate m/min 12/16
X/Z servo motor torque Nm 11/20
X/Z ball screw dia. mm Φ28/Φ40
Turret : Number of stations 8/12
Tool Size(turning / boring) mm 20Χ20/Φ32
Others : Power source kVA 35
Dimensions(LΧWΧH) cm 254X167X166
Gross weight kg 3000
Quantity : 2 Pcs
 
  156
IDMA33101
MakeIndex
ModelGFG250
YOM1983
ConditionGood Condition
PhotoSee Photo
Turning diameter 250 mm
Turning length 500 mm
Spindle passage 65 mm
16-speed revolver
chip conveyor
Control:Control Siemens
Quantity: 2 nos
 
  157
IDMA33091
MakeGoodway
ModelTS150
YOM2008
ConditionGood Condition
PhotoSee Photo
Controller: FANUC Oi-TC
Chuck: 6 inches
Tool: 8 tools
Speed: 6000rpm
Cutting diameter: 200mm
Cutting length: 290mm
Maximum diameter: 400mm
Mechanical weight: 1750KG
 
  158
IDMA33081
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1x Heid S200
1x Heid S315
1 x Okuma
1x Traub
 
  159
IDMA33069
Make
Model
YOM
Condition
PhotoSee Photo
EEN 320, EEN 400 model are intended for processing parts like bodies of revolution in a semi-automatic cycle. The cutting tool is installed in the 6-position tool head. The part is fixed in the cartridge.

EEN 320, EEN 400
RMC, mm: 770
Elongated, mm: 1270
Center height, mm: 190
Turning diameter over the carriage, mm: 380
Turning diameter over the cross-member, mm: 158
Average height of a moving spindle, mm: 1100
Diameter of processing, mm: 360
Length of longitudinal stroke, Z axis, mm: 750 (1250)
Length of the cross course, axis X, mm: 225
Carriage Width, mm: 1280
Inner cone of the movable spindle: M6
Diameter of the channels of the movable spindle, mm: 55
Moving spindle power, kW: 11
The maximum moment, Nm: 650
Maximum cutting force, kN: 10
Maximum feed force, kN: - X: 3 - Z: 5
The maximum weight of the part when processing in the mount of the headstock, kN: 1.5
The number of revolutions of the main drive (3 steps), rpm: 40 ... 2800
Weight, kg: 2250/3400
Dimensions, mm: 1620 x 1170 x 2700 / 3400
 
  160
IDMI7206
MakeMazak,Japan
ModelM70
YOM
ConditionGood Condition
PhotoSee Photo
Two machines available...
With tailstock one number
With out tailstock one number
Two new Mitsubishi M70 packages available
System
Axis Motor
With drives
Retrofit 50,% completed
 
  161
IDMA33045
MakeStar,Japan
ModelSH12
YOM2003
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 21t,
12 mm capacity,
With documentation,
Ikura bartop barloader
 
  162
IDMA33033
MakeRFM
ModelRC32
YOM2011
ConditionGood Condition
PhotoSee Photo
Machining
Capacity Max. Turning Diameter: Ψ 32 mm Pull Type Fuji 32
Ψ 30 mm Push Type index 30
Ψ 80 mm 5”Hydraulic Chuck
Max. Turning Length:60 mm
Spindle Through Hole:Ψ 45 mm
Draw Tube: Ψ 35 mm
Motor Drive: SYNTEC
Motor drive: Syntec LNC Mitsubishi Fanuc
4.4 kw 4.0 kw 3.7/5.5 kw 3.7/5.5 kw
Max. Speed: 6000 rpm

Axis: Type Linear
X-axis Stroke:210 mm
Z-axis Stroke:200 mm
X-axis Servo Motor: 0.75 kw
Z-axis Servo Motor: 0.75 kw
X/Z-axis Rapid Speed:20 m/min

Tools No. of Tools: 6
Turning Tool □16 mm (Opt. □12mm、□20mm)
Drill Shank Ψ 20 mm

General: Hydraulic Unit: 0.75 kw
Coolant Tank Capacity: 110 L
Coolant Pump: 0.56 kw
Floor Space: L800 x W1680 x H1800 mm
Weight: N.W. 1720 kg N.W. 1520 kg
Power Supply: AC / 3PH / 220V / 8kw
CNC Controller :SYNTEC / LNC / MITSUBISHI / FANUC

Standard Accessories
Turning Tool: Air Blow
Drill Holder: Warning Light
Drill Shaft:Working Light
Auto Safety Door: Tool Kit Box
Optional Accessories:
5”Hydraulic 3 Jaw Chuck: Spindle Inner Coolant
Coolant Mist Collector: Spindle Inner Stopping Bar
30/70 bar High Pressure Coolant Pump: Spindle Inner Pushing Bar
Oil Skimmer:Chip Conveyor

Bar Feeder V-65E
Bar Diameter ψ 5.0mm~ψ 65mm
High loading speed, specially developed design.
No special requirements or restrictions on material straightness.
Accommodate raw bars.
Lathe spindle speed can be maximized.
Material can be round, hexagonal and shaped.
Large magazine loading capacity reduces bar supply frequency.
Easy to operate and maintain, small footprint.
Various parameter setting, alarm detection and function display.
 
  163
IDMA33010
MakeMazak,Japan
Model
YOM2018
ConditionGood Condition
PhotoSee Photo
Machine control: Mazatrol SmoothC CNC
Bed 250 mm (universal)
Max. spindle speed 4000 min-1
Main spindle power 11 kW
Main spindle chuck 8 "through chuck B-218A0615 (51 mm pass)
Standard Accessories:
Tap transformer
SD Memory Interface (1 port) + USB Interface (1 port) Set of Adjustment Tools
Tool Holder Set (6)
Anchor pads
8 Position Drum Head (Bolt On Type)
Incl. feeder
1) FMB Turbo 5-65 / 3200 A
The passage of material 5-65 mm
Power consumption 2.5 kW
Bar length 500 - 3200 mm
Feed rate. power variab max 750 N
Feed rate 1000 mm / sec
Weight 1800 kg
Operating voltage 400 V
Control Voltage 24
Press. air 6 bar
Noise max 48 + -5 dB
Machine is still in warranty till 30.4.2020. Price is including bar feeder, dismantling and loading on the truck.
 
  164
IDMI7196
MakeDoosan
Model
YOM
ConditionGood Condition
PhotoSee Photo
670 Diameter
1850 long Slant bed
Fanuc 18T Controller
 
  165
IDMA32991
MakeHankook
ModelProtec 7NB
YOM2016
ConditionGood Condition
PhotoSee Photo
SWING OVER BED 29" (737mm)
SWING OVER CARRIAGE 18" (457mm)
CENTER DISTANCE 157" (4000mm)
SPINDLE BORE 6.8"
MOTOR 15/18.5 kW
OPTIONS / EQUIPPED WITH
SQUARE AUTO TOOL POST
18” AIR CHUCK
SAMCHULLY
CHIP CONVEYOR
FANUC 0ITF CONTROLLER
 
  166
IDMI7194
MakeLeadwell,Taiwan
ModelGTC20
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
- MITSUBISHI CNC CONTROL
- TOOLSETTER
- 8" 3-JAW HYDRAULIC CHUCK
- 12 POSITION TURRET
- TAILSTOCK
Chuck Size 203.2 mm
Bar Capacity 50.8 mm
# Axis 2
Power 11.2 kW
Max RPM 5000 rpm
Turning Dia 299.7 mm
Swing 378.5 mm
Machining Length 629.9 mm
Tailstock Yes
 
  167
IDMI7193
MakeDaewoo
ModelPuma8s
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Max Turning Diameter ................. 14.2?
Max Turning Length ................... 14.6?
Max Swing Over Bed / Carriage ........ 19.7? / 10.8?
X-Axis Travels ....................... 7.9?
Z-Axis Travels ....................... 15?
Spindle Speed ........................ 50-5000 RPM
Spindle Motor ........................ 20 HP
Spindle Nose ......................... A2-6
Spindle Bore ......................... 2.44?
Turret Stations ...................... 12 POSITIONS
Tailstock Taper ...................... MT#4
Machine Dimensions (L x W x H) ....... 90.5? x 70.5? x 67.9
Machine Weight ....................... 8317 LBS

Equipped With:
Fanuc OT CNC Control
8" 3-Jaw Hyd. Chuck
Tool Presetter
Tailstock
 
  168
IDMI7192
MakeDaewoo
ModelPUMA10HC
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
SWING OVER BED ............ 19.7"
MAX. TURNING DIA. ......... 14.6"
MAX. TURNING LENGTH ....... 20.7"
MAX. BAR WORKING DIA. ..... 2.9"
CHUCK SIZE ................ 10"
SPEEDS .................... 35-3500 RPM
SPINDLE NOSE .............. A2-8
SPINDLE BORE .............. 3.38"
MOTOR POWER ............... 25/30HP
TAILSTOCK QUILL DIAMETER .. 3.75"
TAILSTOCK QUILL STROKE .... 3.94"
TAILSTOCK TAPER ........... MT#4
X-AXIS TRAVEL ............. 8.3"
Z-AXIS TRAVEL ............. 21.7"
RAPID TRAVERSE X/Z ........ 470/630 IPM
TURNING TOOL SIZE ......... 1"
BORING TOOL SIZE .......... 1.5"
APPROX. WEIGHT ............ 10,560

EQUIPPED WITH:
- FANUC 0T CNC CONTROL
- 10" 3-JAW HYD. CHUCK
- 10 STATION TURRET
- TAILSTOCK
- CHIP CONVEYOR
- ALL AVAILABLE TOOLHOLDERS
 
  169
IDMI7191
MakeTakamaz
ModelX-10
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
MAX BAR CAPACITY ............ 1.37" (35mm)
SPINDLE NOSE ................ A2-5
SPINDLE THROUGH HOLE DIA. ... 1.81" (46mm)
MAX. ROTATION SPEED ......... 3,500 RPM
NUMBER OF TURRET STATIONS ... 8
SPINDLE MOTOR ............... 7.5 HP
APPROX. WEIGHT .............. 4800 LBS

EQUIPPED WITH:
TAKAMAZ FANUC 21-TB CONTROL
HYDRAULIC COLLET CHUCK
PARTS CATCHER, PARTS CONVEYOR
CHIP CONVEYOR
ALL AVAILABLE MANUALS
 
  170
IDMA32944
MakeGILDEMEISTER
ModelCTX200 S2
YOM2007
ConditionGood Condition
PhotoSee Photo
TurnPlus extension control
Few operating hours (+/- 10,000h)
Technical details / extensions / accessories:
Max. Diameter processing 210 mm
Max. Length machining 350 mm
Control EP 4290 Heidenhain
Main axis:
Machining rotation - main axis 25-5000min / -1
Capacity - main shaft 7.5 kW
Maximum load 72 Nm
Chuck diameter max 170 mm
Main shaft bearing 85 mm
Turret:
Number of positions for tools 12 pos.
axle race:
x- 160mm stroke
z- race 350mm
Mobile doll / shaft knife holder
Power supply required: 36 kVA
Weight: 3.5 T
Dimensions: 4.5x2.5x2.0 m
 
  171
IDMA32915
MakeWMW Niles ,Germany
ModelN22
YOM1996
ConditionGood Condition
PhotoSee Photo
Diameter: 400 mm,
Working length: 630 mm,
Swing over bed: 520 mm,
Axes: X- 300 mm, Y- 840 mm,
Work piece weight: 400 kg,
Hole in spindle: 85 mm,
Machine weight cca: 6,8 t
Control: Simmons
 
  172
IDMA32875
MakeOkuma,Japan
ModelMac Turn 50CNC
YOM2001
ConditionGood Condition
PhotoSee Photo
Control: OSP 7000
With Helicoidal interpolation
DNC RT
OPTIONS
IGF
Power control,
Swing over bed : 610 mm,
Swing over slide : 580 mm,
Turning diameter : 580 mm,
Turning length : 1500 mm,
C axis: 360° (0.001°),
B axis: 360° (1°)
Hydraulic tailstock with Morse 5 taper,
Swarf conveyor,
Auto Tool Changer (ATC): 50 Positions,
Spindle latper: BT50
 
  173
IDMI7162
MakeTatung(taiwan)
ModelTL 2800H
YOM1992
ConditionGood Condition
PhotoSee Photo
Check size 300 MM hydraulic
Control fanuc OT.C
ABC 2800 MM
With chipconver and sterdi
 
  174
IDMA32796
MakeMazak,Japan
ModelSlant Turn 450
YOM
ConditionGood Condition
PhotoSee Photo
Dia: 716 x Center distance: 2000 mm
12 inch 3 jaw Hydraulic chuck,
Control: Mazatrol Fusion 640T
 
  175
IDMA32792
MakeVDF Boehringer
Model
YOM1985
ConditionGood Condition
PhotoSee Photo
Turning diameter: max. 700 mm
Circulation diameter: max. 750 mm
Turning length 2000 mm
Spindle power: 65 kW ΰ 60% ED -15
Speed range: Stage I: 7 - 700 r / min / Stage II: 700 - 2,000 r / min
Torque: max. 3,650 Nm
Spindle bore: 132 mm
Feed drive:
Feed rate: 0.1 - 10.000 mm / min
Rapid traverse speed: 10 m / min
Tooling system:
Tool turret with 12 receptacles on the right VDI 60
Tailstock:
Quill adjustment: hydraulically via foot switch program or manually
Clamping force: 25 kN
Quill stroke: 130 mm
Quill diameter: 130 mm
Pinoleggel-Gr .: MK5
Total power requirement: 155 kVA
Machine power: 400 V - 50 Hz
Machine dimensions (L / W / H): 5,365 x 2,145 x 2,855 mm
Machine weight approx .: 23 t (switch cabinet is attached to the machine)
Domestic equipments:
bezel
Chucks SMW: KRS NZ 315, clamping range: 50 - 310
chip conveyor
 
  176
IDMA32790
MakeTraub
ModelTNA-500
YOM1999
ConditionGood Condition
PhotoSee Photo
Travel Z-axis: 1,070 mm
Max. Circulation Ψ over bed: 680 mm
Max. Circulation Ψ via slide guide: 445 mm
Tip width / turning length: 1,250 mm (- 160 mm chuck)
Spindle passage of the work spindle: 80 mm
Diameter in the front bearing: 140 mm
Max. Torque: 545 Nm
Max. Torque (S2): 769 Nm
Spindle head: A8 according to DIN55026
tool magazine
Type of magazine: 1x revolving drum Ψ500 mm
Tool holders: VDI 40 according to DIN 69880
Max. Tool length: 390 mm at Ψ 50 mm
Powered tools: no
Number of tool places: 12
Coolant supply
· Full-flow cooling of the machine with water-miscible cooling lubricant 8%, 3.5 bar
· Internal coolant supply through tool holder
· Supply for IK with 30 l / min at 11.5 bar by booster pump
Machine weight: 6,800 kg
Dimensions LxWxH: 5.5 x 2.3 x 2.2 m (without additional equipment)
Connected load: 42 kW (400V, 50Hz)
Transport dimensions and weights:
Machine: L = 5,500 mm B = 2,300 mm H = 2,150 mm M = 7,000 kg
Chip conveyor: L = 4,500 mm W = 650 mm H = 1,600 mm M = 600 kg
Extraction: L = 1,200 mm B = 800 mm H = 1,100 mm M = 300 kg
Hydraulic group size: L = 600 mm B = 800 mm H = 900 mm M = 250 kg
 
  177
IDMI7155
MakeOMG
Model
YOM
ConditionGood Condition
PhotoSee Photo
Center Height - 400 mm
Length of Job - 1500 mm
Swing Dia. Over Cross-slide - 500 mm
-CNC Control will have to changed.
 
  178
IDMA32767
MakeDMG
ModelCTX510EcoLine
YOM2009
ConditionGood Condition
PhotoSee Photo
Max. Turning diameter: 680 mm
Longitudinal axis (Z): 1050 mm
CNC: Siemens
Spindle speed: 3250 rpm
Engine power: 33 kW
Grommet: 71 mm
Tower: VDI 40
No tool positions: 12, max. 6 motorized
grasshopper
chip conveyor
bar package


Spindle head VDI 40
Spindle caliber
Number of lathe heads
Number of tools on the lathe head
Number of rotating tools
Adjustable speed 3250 rpm
Shaft motor power 33.0 kW
Tailstock yes
 
  179
IDMI7142
MakeDaewoo
ModelPuma12
YOM
ConditionGood working condition
PhotoSee Photo
Capacity:
Max Turning Diameter: 380 mm
Max Turning Length: 770 mm
Max Bar Capacity: 77 mm
Swing Over Bed: 565 mm
Distance Between Centers: 914 mm
X Axis Travel: 200 mm
Z Axis Travel: 800 mm
Rapid Traverse X Axis: 480 IPM
Rapid Traverse Z Axis: 630 IPM
Spindle Nose: A2-8
Spindle Bore: 90 mm
Spindle Speed: 15 – 3000 RPM
Spindle Motor: 30 HP
 
  180
IDMI7141
MakeCampro
ModelCPL20
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Dia : 200 mm
Admit : 600 mm
Year : 2007
Control : FANUC Oi Mate TC
With Tailstock
Machine in Excellent Condition.
With STABILIZER
 
  181
IDMI7139
MakeDaewoo
ModelPUMA-12
YOM
ConditionGood Condition
PhotoSee Photo
Max Turning Diameter: 380 mm
Max Turning Length: 770 mm
Max Bar Capacity: 77 mm
Swing Over Bed: 565 mm
Distance Between Centers: 914 mm
X Axis Travel: 200 mm
Z Axis Travel: 800 mm
Rapid Traverse X Axis: 480 IPM
Rapid Traverse Z Axis: 630 IPM
Spindle Nose: A2-8
Spindle Bore: 90 mm
Spindle Speed: 15 – 3000 RPM
Spindle Motor: 30 HP
 
  182
IDMI7137
MakeDaewoo Puma
ModelPuma12L-C
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Size: 16.5"
Max Diameter Bar Capacity 5.2"
Max Swing Over Bed / Carriage: 22.4" / 14.6"
Max Turning Diameter: 19"
Max Machining Length: 40.2"
Spindle Speed: 20 - 2000 RPM
Spindle Bore: 5.2"
Spindle Nose: A2-11
Spindle Motor:35 / 30 HP
Spindle Torque: 1009 ft. lbs.
Tools: 12
Rapid Traverse Rates (X / Z): 480 / 630 IPM
X-Axis Travel: 10.2"
Z-Axis Travel: 41.3"
Tailstock Taper: MT#5
Machine Dimensions (L x W x H): 141" x 87" x 89"
Machine Weight: 17,380 lbs.
Fanuc ot
 
  183
IDMA32690
Make
Model
YOM2004
ConditionGood Condition
PhotoSee Photo
Gang type
6 in Chuck
Fanuc io mate
minimum purchase one 40 ft load
With Chip conveyor
Total quantity 20 pcs
 
  184
IDMI7123
MakeTakang,Taiwan
ModelTA32
YOM
ConditionGood Condition
PhotoSee Photo
TA32 Chuck ;
collet type chuck.
Linear Toolings
Fanuc OTC Control alpha drives.
Coolant Tank
Manuals.
 
  185
IDMI7122
MakeGoodway
ModelTA32
YOM
ConditionGood Condition
PhotoSee Photo
Chuck ;
Collet type chuck.
Linear Toolings
Fanuc OTC Control alpha drives.
Coolant Tank
Manuals.
 
  186
IDMI7121
MakeHitachi Seiki,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
200 dia,
300 abc
Fanuc 60
 
  187
IDMI7120
MakeHardinge
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Chuck dia: 165 mm,
350 ABC
12 Station Servo Turret
5 live tools
6000 spindle RPM
Lm guideways
Fanuc 18T Control
Alpha drives
Chipconvyer
Coolant Tank
Transformer
Manuals
 
  188
IDMI7115
MakeChevalier,Taiwan
Model1840S
YOM
ConditionGood Condition
PhotoSee Photo
Swing over Bed - 460 mm
Distance between Centers - 1000 mm
Swing over Cross-Slide - 230 mm
Spindle Speeds - 40 rpm to 2800 rpm
CNC Control - Siemens 810D
Year of Make - 2003
Complete with lots of accessories & tooling.
Complete with operating manual, electrical drawings etc.
 
  189
IDMA32604
MakeDaewoo
ModelPuma200
YOM1998
ConditionGood Condition
PhotoSee Photo
Max Turning Diameter: 13.78?
Max Turning Length: 15.75?
Max Bar Capacity: 2.56?
Swing Over Bed: 20.08?
X Axis Travel: 9.53?
Z Axis Travel: 17.32?
Rapid Traverse X Axis: 787 IPM
Rapid Traverse Z Axis: 1000 IPM
Spindle Nose: A2-6
Spindle Bore: 2.99?
Spindle Speed: 45 – 4500 RPM
Spindle Motor:: 20 / 15 HP
Turret Capacity: 12 Tools
Turret Index Time: 0.5 Second
Tailstock Taper: MT-4
Tailstock Quill Dia.: 2.95?
Tailstock Quill Travel: 3.15?
Electrics: 220v / 3-Phase
Overall Dimensions: 105? x 64? x 69? H
Weight: 8800 lbs
Equipped With:
Mitsubishi Meldas 520L
Tailstock
 
  190
IDMI7113
MakeOkuma Howa
ModelL290
YOM2011
ConditionGood Condition
PhotoSee Photo
Machine is in EUROPE, NOW ON THE WAY TO INDIA
IT WILL AVAILABLE MIDDLE OF NEXT MONTH.
Chuck Size: 200 mm
Bar Capacity:50 mm
Power: 11.2 kW
Max RPM: 5000 rpm
Turning Dia: 290 mm
Swing: 500 mm
Machining Length
Tailstock
Control :YES
CNC( FANUC OiTD)
 
  191
IDMI7112
MakeTornado
ModelTornado300
YOM1995
ConditionGood Condition
PhotoSee Photo
Swing over bed : 530 mm
Swing over cross-slide : 330 mm
Distance centre tot centre : 500 mm
Max longitudinal travel : Z-axis 20 m/min
Max cross travel : X-axis 10 m/min
Spindle cone : A2-8
Dia of spindle bore : 90,5 mm
Power on the spindle : 22 kW
Number of speeds : 4000 rpm
Command Fanuc : GE Fanuc Series O-T
Total power needed : 53 kVa
Weight : 3,3 ton
Toolchanger : yes
Number of tools : 12 tools
 
  192
IDMI7111
MakeMAZAK
Model
YOM
ConditionGood Condition
PhotoSee Photo
Length :1500 mm
Diameter : 300 mm
 
  193
IDMI7110
MakeHwacheon
ModelHi-Eco11
YOM
ConditionGood Condition
PhotoSee Photo
Chuck dia - 200mm
ABC - 500mm
8 Stations turret
Telstock available
Control - Fanuc OT
Condition: Working But Not Under Power
 
  194
IDMI7109
MakeVictor
ModelVTurn20
YOM2003
ConditionExcellent
PhotoSee Photo
Chuck dia - 200mm
X”Axis travel - 650mm
Z”Axis travel - 300mm
Spindle speeds - 6000rpm
10 Stations AC Servo turret
Telstock available
Cnc Fanuc OTD
 
  195
IDMA32581
MakeSwiss
ModelManurhin KMX413
YOM2006
ConditionGood Condition
PhotoSee Photo  |  See Video
Max turning diameter 16 mm
Driven tools
 
  196
IDMA32519
MakeMazak,Japan
ModelIntegrex400Y
YOM1999
ConditionGood Condition
PhotoSee Photo
Main Spindle Chuck: 10"
Maximum Swing: 24.01"
Maximum Cutting Diameter: 24.01"
Main Spindle HP: 30/40 HP
Main Spindle RPM: 3000 RPM
Main Spindle Nose: A2-8
Main Spindle Bore: 3.46"
Spindle Taper: KM 63
Milling Spindle HP: 20
Milling Spindle RPM: 6000 RPM
Number of Tool Stations: 40
X Axis Travel: 22.83"
Y Axis Travel: +/- 4.13"
Z Axis Travel: 43.11"
Rapid Traverse Rate X: 1181 IPM
Rapid Traverse Rate Y: 591 IPM
Rapid Traverse Rate Z: 1181 IPM
Rapid Traverse Rate C: 400 RPM
Tailstock Body Travel: 36.22"
Tailstock Center Stroke: 5.12"
Tailstock Center
Control: Mazatrol Fusion 640T

Equipped With:
Chip Conveyor
 
  197
IDMA32518
MakeMazak,Japan
ModelIntegrex30y
YOM1996
ConditionGood Condition
PhotoSee Photo
Main Spindle Chuck: 10"
Maximum Swing: 20"
Maximum Cutting Diameter: 20"
Maximum Machining Length: 40"
Main Spindle HP: 30/ 35 HP
Main Spindle RPM: 3500
Main Spindle Nose: A2-8"
Main Spindle Bore: 3.46"
Spindle Taper: CAT 40
Number of Tool Stations: 20
X Axis Travel: 17.75"
Y Axis Travel: +/- 3.54"
Z Axis Travel: 42"
Rapid Traverse Rate X: 472 IPM
Rapid Traverse Rate Y: 393 IPM
Rapid Traverse Rate Z: 708 IPM
Rapid Traverse Rate C: 100 RPM
Tailstock Body Travel: 33.98"
Tailstock Center Stroke: 5.12"
Tailstock Center
Machine Weight: 14,300 Lbs.
Control: Mazatrol T-Plus

Equipped With:
Chip Conveyor
 
  198
IDMA32517
MakeMazak,Japan
ModelIntegrex 200IIIST
YOM2004
ConditionGood Condition
PhotoSee Photo
Main Spindle Chuck: Collet
Maximum Swing: 26"
Maximum Cutting Diameter
Maximum Machining Length: 40"
Maximum Bar Size: 2"
Main Spindle HP: AC 20/30
Main Spindle RPM: 5,000
Main Spindle Nose: A2-6
Main Spindle Bore: 2.99"
Main Spindle Min. Indexing Increment: 0.0001 Deg.
Spindle Taper: KM 63
2nd Spindle HP: AC 20/25
2nd Spindle RPM: 5,000
2nd Spindle Bore
2nd Spindle Chuck: Collet
Max Distance Between Spindles
Number of Tool Stations: 40
Maximum Tool Diameter: 3.54"
Max Tool Adjacent Pockets Empty: 4.72"
Maximum Tool Length: 9.84"
Maximum Tool Weight: 22 lbs
Lower Turret Positions: 9
X Axis Travel: 22.83"
Y Axis Travel: +/- 3.15"
Z Axis Travel: 41.1"
B Axis Travel: 225 Deg.
C Axis Positioning
W Axis Travel: 41.34"
Rapid Traverse Rate X
Rapid Traverse Rate Y
Rapid Traverse Rate Z
Rapid Traverse Rate C
Tailstock Body Travel
Tailstock Center Stroke
Tailstock Center
Floor Space
Control: Mazatrol Fusion 640MT Pro

Equipped With:
Microcentric CB65-ND/A6 Collet Chuck
Automatic Parts Catcher
Workpiece Conveyor for parts Catcher
Thru Hole Chuck Package for 2nd Spindle
Chip Conveyor
Mazak Super Flow II ( 1000 PSI ) Upper Turret
213 PSI Lower Turret
Coolant Temperarture Control System
Iemca VIP 80E Barfeed
Overload Detection
Tool Breakage Detection Inside The Magazine
 
  199
IDMA32516
MakeMazak,Japan
ModelIntegrex 200IISY
YOM2001
ConditionGood Condition
PhotoSee Photo
Main Spindle Chuck: 8"
Maximum Swing: 21.25"
Maximum Cutting Diameter: 21.25"
Maximum Machining Length: 39.5"
Maximum Bar Size: 2"
Main Spindle HP: 20/ 30
Main Spindle RPM:5000 RPM
Main Spindle Nose:A2-6
Main Spindle Bore: 2.4"
Spindle Taper: KM 63
2nd Spindle HP: 10
2nd Spindle RPM: 5000
2nd Spindle Chuck: 6"
Number of Tool Stations: 40
X Axis Travel: 20.87"
Y Axis Travel: +/- 3.15"
Z Axis Travel: 42"
B Axis Travel: 225 Deg.
C Axis Positioning: 0.001 Deg.
Rapid Traverse Rate X:1181 IPM
Rapid Traverse Rate Y: 590 IPM
Rapid Traverse Rate Z: 1299 IPM
Rapid Traverse Rate C: 400 RPM
Control: Mazatrol Fusion 640MT
Equipped With:
Chip Conveyor
 
  200
IDMA32503
MakeMAZAK
ModelQT20
YOM1985
ConditionGood Condition
PhotoSee Photo  |  See Video
Turning length 1000 mm
Max. swing 508 mm
Max. turning dia 300 mm
Spindle speeds 3000 rpm
Spindle bore 65 mm
Turret w/8 stations
Motorpower 18 Kw

Control:
Mazatrol T2

Equipped with:
6 tool holders
 
  201
IDMA32452
MakeVoestalpine
ModelWHC300S
YOM1992
ConditionGood Condition
PhotoSee Photo
Turning length - 1120 mm
Longitudinal carriage travel - 1240 mm
Cross carriage travel - 220 mm
Workpiece's diameter - 470 mm
All acessories, including ones for milling work are available
 
  202
IDMA32437
MakeEmco
ModelTurn 325 II
YOM2003
ConditionGood Condition
PhotoSee Photo
Workpiece's diameter - 250 mm
Center distance - 405 mm
Turning diameter - 85 mm
Bar diameter - 25.5 mm
Weight - 8000 kg
 
  203
IDMA32253
MakeColchester
ModelCNC2000
YOM
ConditionGood Condition
PhotoSee Photo
Height over bench - 400mm
Height over carriage - 246mm
Center distance - 1250mm
Spindle bore - 54mm
Weight - 2360kg
 
  204
IDMA32207
MakeNakamura
ModelWTY250
YOM1988
ConditionGood Condition
PhotoSee Photo
CNC Fanuc 18 i
2 spindles with C axis,
2 x 12 position tool heads ( driven)
Top turret with Y axis
Spindle bore 65 and 43 mm
Measuring probe
Bar feeder FMB SL 65
Working hours 27519 h
 
  205
IDMA32195
MakeNiles-Simmons
ModelN50MC-6000
YOM
ConditionGood Condition
PhotoSee Photo
NOMINAL TURNING LENGTH(mm) : 6,000
SWING-Ψ(mm) : 1,250(Over Cross slide) 1,300(Over Bed)
WORKING HEIGHT(mm) : 1,700
CNC-CONTROL : SINUMERIK Si840D
TOOL MAGAZINE 48 POSITIONS
SPINDLE ACTIVE
 
  206
IDMA32133
MakeMonfort,Germany
ModelMNC 5
YOM
ConditionGood Condition
PhotoSee Photo
Technical details attached in photos.
 
  207
IDMA32083
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1 x Okuma LB25 CNC Lathe + Loading Robot,
Year: 1991,
Serial number: 03030972.
1 x Okuma LB25M CNC Lathe + Loading Robot,
Year: 1994,
Serial number: 06110082.
C-Axis.
+ 1 spare robot for parts.
+ 1 pallet of static and live tool holders.
Quantity: 2 nos.
 
  208
IDMA32052
MakeHurco
ModelTM8i
YOM2018
ConditionGood Condition
PhotoSee Photo
Control: Max 5
Max Swing Over Bed: 21.6"
Max Swing Over Carriage: 11.8"
Cross Travel (X-Axis): 8"
Longitudinal Travel (Z-Axis): 20"
Spindle Bar Capacity: 2"
Spindle Nose: A2-6
Spindle Speed: 4,800 RPM
Spindle Motor: 22 HP
Turret Tool Positions: 10
Machine Dimensions: 116"L x 91"W x 80"H
Machine Weight: 8,500 LBS
 
  209
IDMA31910
MakeMori Seiki
ModelTL40/2000
YOM1988
ConditionGood Condition
PhotoSee Photo
Swing over Bed: 620 mm,
Swing over Cross Slide: 380 mm,
Distance Between centres: 2100 mm,
RPM: 25 - 2,500 rpm,
Tailstock diameter: 150 mm,
Turret: 8 station,
Hydraulic Steady: SMW,
Controler: FANUC FAPT TURN 10 T,
Chip conveyor,
FANUC Red Cap motors and Absolute Encoders
 
  210
IDMA31897
MakeTraub
ModelTNS26DGY
YOM1991
ConditionGood Condition
PhotoSee Photo
Automatic lathe, turning and milling CNC Traub TNS 26DGY with Y axis, barstock IEMCA MINI BOSS 325 CNC
Machine still in production, can be seen during work.
Turning length max 270 mm
Spindle passage 30 mm
Main spindle 7.5 kW, oś C
Turret 1 axis: X, Z, Y, driven tools
Turret 2 axis: X,Z, driven tools
Nkeo7
Sub spindle 3.7 kW - axis C and axis Z (V)
Connected power 35 Kw
Weight ab. 3600 kg + barstock IEMCA ok 1000kg
Full documentation
 
  211
IDMA31885
MakeHarrison
ModelAlpha550U
YOM2002
ConditionGood Condition
PhotoSee Photo
Turning diameter: 284/370 mm,
Turning over bed: 554 mm,
Distance between: 2032 mm centers
Through the : 102 mm spindle,
Revolutions rpm: 1800 rpm, tailstock,
Additionally accessories, steady and etc.,
Control: Fanuc control
 
  212
IDMA31870
MakeTsugami,Japan
ModelNP32
YOM1991
ConditionGood Condition
PhotoSee Photo
The lathe is in working conditions.
Turrets - 2
Tools in a turret - 6
Min/Max turning diameter - 8/32 mm
Travels X, XZ, Z1, Z2 - 85, 115, 215, 215 mm
Spindle rotations - 35..4500 rpm
 
  213
IDMA31846
MakeGILDEMEISTER
ModelCTX-310
YOM2007
ConditionGood Condition
PhotoSee Photo
Controller: SIEMENS 840D powerline
Max. swing dia.: 505mm
Swing over cross slide: 365mm
X/Z axis travel: 202/450mm
Chuck size: 8” (3jaw)
Spindle speed: 5,000rpm (Built-in)
Bar capacity: Ψ51mm
Tool capacity: 12
Tailstock taper: MT4
Air conditioner for electrical cabinet
Chip conveyor
 
  214
IDMI7042
MakeJapan
ModelACT-3
YOM
ConditionGood Condition
PhotoSee Photo
Swing Over Bed:465,
Equipped With : Fanuc Series 15-T Controller,
Distance Between Centers: 606mm,
Max Turning Length:586mm ,
Spindle Nose: A2-6,
Spindle Bore: 59mm,
Spindle Speeds: 35 – 3500 RPM,
Spindle Motor: 15 HP,
Turret Type: Bi-Directional 10 Station,
X-Axis Travel: 157mm,
Z-Axis Travel: 606mm,
Approx. Shipping Weight: 9,000 Lbs.,
Approx. Shipping Dimensions: 120″ L x 68″ W x 84″ H,
X-Axis Rapid: 317.92 IPM,
Z-Axis Rapid: 476.88 IPM,
Tailstock Quill Diameter: 3.18″,
Electrical: 240V/3PH,
USED CNC TURNING CENTER, USED CNC LATHE.
 
  215
IDMA31801
MakeJohnford
ModelHT100E2D
YOM
ConditionGood Condition
PhotoSee Photo
Swing over bed: 680 mm,
Swing over cross slide: 590 mm,
Distance between centers: 2460 mm,
Spindle speeds: auto 4 steps,
Max. spindle speed: 750 RPM,
Spindle motor: 40/50 HP,
Spindle nose: A2-15
Spindle bore: 232.5 mm,
X axis travel:315 mm,
Z axis travel: 2460 mm,
X axis rapid traverse: 472 IPM,
Z axis rapid traverse: 590 IPM,
Tailstock travel: 2165 mm,
Tailstock quill travel: 1975 mm,
Tailstock spindle taper: MT7
Equipped with:
FANUC 18i-TB CNC control,
24"3 Jaw front mount SMW air chuck,
12 Position upper tool turret,
SMW autoblock Steady REST,
Taistock,
Lower slide with boring bar mounting block for I.D.threading,
Coolant system,
Chain type chip conveyor,
Auto lube with alarm,
halogen work light.
Quantity: 2 no
 
  216
IDMI7038
MakeYang
ModelML 25
YOM
ConditionGood Condition
PhotoSee Photo
CHUCK DIA 250.
ABC 500.
TAILSTOCK. FANUC OT. CHIP CONVEYOR. 8 STATION HYDRO.
 
  217
IDMI7035
MakePride-Jaguar
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size:200
Turning Lenthe 500
Control :Fanuc oi -TF
 
  218
IDMA31701
MakeDoosan
ModelPuma MX2000ST
YOM2007
ConditionVery good condition
PhotoSee Photo
Max turning length: 1020 mm
Max turning ψ : 540 mm
Bar capacity : 65 mm
Spindle nose A2-6 C-Axis 0.001°
Spindle speeds ~ 5000 rpm
Spindle power 22 kW
Subspindle speeds ~ 5000 rpm
Subspindle power 22 kW
Milling spindle speeds ~ 10000 rpm
Milling spindle power :18.5 kW
Toolchanger capacity :20
Tool taper Capto C6
Lower revolver BMT 65P
Tool capacity 12 (all driven)
Driven tools speeds ~ 4000 rpm
Machine weight :12500 kg
Dimensions ca. :4520 x 2300 x 2600 mm
 
  219
IDMA31676
MakeMazak,Japan
ModelNexus450-II
YOM
ConditionGood Condition
PhotoSee Photo
Swing over bed: 830 mm,
Swing over carriage: 520 mm,
Max machining dia: 570 mm,
Max. machining length" 1997.5 mm,
Bar cap: 162.25 mm,
X axis travel: 312.5 mm,
Z axis travel: 2085 mm,
Spindle speed: 2000 RPM,
Spindle motor: 40/50 HP,
Spindle nose: A2-15,
Spindle bore: 182 mm,
Equipped with:
Control: Mazatrol matrix nexus 2 cnc
213 PSI high power coolant (10 GPM),
12D/24 position drum turret
Programmable tailstock (MT5 Built in live center)
Tool eye
Absolute positioning system,
Additional coolant nozzle (above headstock),
21" Pratt burnerd 4-jaw independent chuck (Rear),
20" Pratt burnerd 3- jaw chuck (Rear),
Jorgensen chip conveyor
Note: Less than 500 cutting houres
 
  220
IDMA31660
Make
ModelCK6152/3000 mm
YOM
ConditionBrand New
PhotoSee Photo
Swing over bed: 520 mm,
Swing over carriage: 300 mm,
Pan of guide way: 400 mm,
Spindle nose: A2-8
Spindle bore: 80 mm,
Taper hole of spindle: 86.1.20
Range of spindle speeds: 25~200 14~1600 35~1600 r/min,
Center height from bed: 270 mm,
Chuck: 250 mm,
Min feed increment: 0.001/0.001 mm,
Rapid speeds: 4000/5000 mm,
Max. travel of X: 280 mm,
Turret working position: V4
Indexing time: 2.4 s
Indexing repeatility: 0.008 mm,
Section of tool shank: 25 x 25 mm,
Dia /travel of tailstock: 85/150 mm,
Taperhole of tailstock: Morse5 mm,
Work piece accuracy: IT6-IT7
Surface roughness: Ra1.6 um,
Main power: 7.5 kw,
Control: Fanuc of Siemens
 
  221
IDMA31659
Make
ModelCK6152/2000 mm
YOM
ConditionBrand New
PhotoSee Photo
Swing over bed: 520 mm,
Swing over carriage: 300 mm,
Pan of guide way: 400 mm,
Spindle nose: A2-8
Spindle bore: 80 mm,
Taper hole of spindle: 86.1.20
Range of spindle speeds: 25~200 14~1600 35~1600 r/min,
Center height from bed: 270 mm,
Chuck: 250 mm,
Min feed increment: 0.001/0.001 mm,
Rapid speeds: 4000/5000 mm,
Max. travel of X: 280 mm,
Turret working position: V4
Indexing time: 2.4 s
Indexing repeatility: 0.008 mm,
Section of tool shank: 25 x 25 mm,
Dia /travel of tailstock: 85/150 mm,
Taperhole of tailstock: Morse5 mm,
Work piece accuracy: IT6-IT7
Surface roughness: Ra1.6 um,
Main power: 7.5 kw,
Control: Fanuc of Siemens
 
  222
IDMA31658
Make
ModelCK61100E/6000
YOM
ConditionBrand New
PhotoSee Photo
Swing over bed: 1000 mm,
Swing over carriage: 630 mm,
Max. work piece length: 1500 3000 5000 mm,
Max. turning length: 1230 x 2730 x 4730 mm,
Spindle nose: A215
Manual: 1000
Spindle bore: 130 mm,
Taper hole of spindle: 1.20/140 mm,
Spindle speed and range:3.15~315r/min,
Center height from bed: 500 mm,
Min feed increment of X-Z axis: 0.001/0.001 mm,
Rapid speeds of X-Z axis: 300 /6000 mm
Max. travel of X axis: 520 mm,
Turret working position: V4
Indexing time: s 2.6
Indexing repeat ability: 0.01 mm,
Section of tool shank: 40 mm
Diameter of tailstock quill: 160 mm,
travel of tailstock quill: 300 mm,
Taper hole of tailstock quill: Morse 6
Accuracy and acceptance condition
Workpiece accuracy: IT6~IT17
Surface roughness: Ra1.6
Acceptance contion: JB/T8324.1
Main power: 22 kW,
Machine overall dimensions
Length: 4500 x 6000 x 8000 mm,
Width: 2435 mm,
Height: 2300/2600 mm,
Machine mass: 9000 kg.
Control: Fanuc or Siemens
 
  223
IDMA31657
Make
ModelCK61100E/6000
YOM
ConditionBrand New
PhotoSee Photo
Swing over bed: 1000 mm,
Swing over carriage: 630 mm,
Max. work piece length: 1500 3000 5000 mm,
Max. turning length: 1230 x 2730 x 4730 mm,
Spindle nose: A215
Manual: 1000
Spindle bore: 130 mm,
Taper hole of spindle: 1.20/140 mm,
Spindle speed and range:3.15~315r/min,
Center height from bed: 500 mm,
Min feed increment of X-Z axis: 0.001/0.001 mm,
Rapid speeds of X-Z axis: 300 /6000 mm
Max. travel of X axis: 520 mm,
Turret working position: V4
Indexing time: s 2.6
Indexing repeat ability: 0.01 mm,
Section of tool shank: 40 mm
Diameter of tailstock quill: 160 mm,
travel of tailstock quill: 300 mm,
Taper hole of tailstock quill: Morse 6
Accuracy and acceptance condition
Workpiece accuracy: IT6~IT17
Surface roughness: Ra1.6
Acceptance contion: JB/T8324.1
Main power: 22 kW,
Machine overall dimensions
Length: 4500 x 6000 x 8000 mm,
Width: 2435 mm,
Height: 2300/2600 mm,
Machine mass: 9000 kg.
Control: Fanuc or Siemens
 
  224
IDMA31617
MakeHarrison
ModelAlpha330S
YOM
ConditionGood Condition
PhotoSee Photo
Swing over bed: 330 mm dia,
Swing over crosslide: 210 mm dia,
X axis travel:180 mm,
Z axis travel: 1016 mm,
Spindle bore: 42 mm dia,
Spindle motor: 7.5 KW,
Spindle speeds to 3500 mm RPM,
With offline alphalink CAD/CAM software - allows machine to operate in full " auto moe" dickson quick change toolpost and holders,
3 & 4 Jaw chuck,
Interlocking guards. machine lighting,
Coolant,
Operation manuals,
Control: Fanuc CNC
 
  225
IDMA31599
MakeGildemeister,Germany
ModelCTX310V3
YOM
ConditionGood Condition
PhotoSee Photo
Max swing over bed : : 500 mm
Swing over cross slide : 375 mm (14.75 in)
Bar capacity : 50.8 mm (2 in)
Clamping chuck diameter : 170/210 mm (6.69/8.2 in)
Clamping chuck diameter back Spindle: 165 mm (6.49 in)
Transverse stroke: 202 mm (7.9 in)
Longitudinal stroke : 450 mm (17.7 in)
Y-axis stroke : +/-40 mm (1.57 in)
Feed drive
Rapid traverse X/Z axes : 24/30 m/min (787/1181 ipm)
Rapid traverse Z2/Y axis: 30/10 m/min 1181/394 ipm
Headstock (left/right)
Spindle nose (plain flange): 140 h5/145h5 mm
Inside diameter front bearing : 100/90 mm 3.93/3.54 in
Spindle bore diameter : 69/44 mm 2.69/1.73 in
Main drive
Rating AC main drive (100% ED): 16 kW 21.4 HP
Torque (100% ED): 153 Nm 114 lb.ft.
Speed range : 20 - 6000 rpm
Back spindle
AC drive power (100% ED): 7.5 kW 10 HP
Torque (100% ED): 48 Nm 35.3 lb.ft.
Speed range: 20 - 6000 rpm
Tool turret
Number of tool stations 12
Tool reception according to DIN 69880 (VDI 3425)
cylinder shaft diameter 30 mm 1.181 in
Indexing time 30° 0, 2 sec.
Tool turret Heidenhain controls
Number of driven tools 12
Drive power (40% ED) 9 KW 12 HP
Torque (40%) 20 Nm 14.8 ft lb
Max speed. 4500 min-1
C-axes, main spindle / backspindle
Speed range 0 - 200 min-1
Accuracy at point stopping < 0, 04 degrees

Electrical connection
Installed power, max ca. 24 kVA
Voltage 400 V
Frequency 50 Hz
Net weight of the machine with chip conveyor approx. 4500 kg 9920 lbs.
Dimensions Machine with chip conveyor LxBxH ca. 4000 x 1563 x 1730 mm
ca. 157 x 61.5 x 68.11 inch

Equipped with
• Heidenhain Plus iT CNC Control
• 8"Chk,
• Tailstocks,
• C-Axis, Live Tools
• Comes with Chip Conveyor
• 6 live tooling holders (axil and Radial), transformer and Manuals
 
  226
IDMA31593
MakeMiyano
ModelBNE 51SY
YOM2000
ConditionGood Condition
PhotoSee Photo
MIYANO CNC Turning Centre with 7 axes
With live tooling, sub-spindle and twin turrets
Control:FANUC 18i-T
With C axis
Upper turret travel X1xZ1xY1: 150x380x40mm
Lower turret travel X2xZ2: 115x125mm
B-axis travel:450mm
Max. work length: 90mm
Main motor: 15/20hp
Max. spindle speed:4000rpm
Bar capacity:51mm
Machine size-H:2090mmx2855x2070mm
Weight:7200kg
Complete with FMB magazine bar loader
Complete with good tooling package
 
  227
IDMA31547
MakeDugard
ModelFNL320SY
YOM2014
ConditionGood Condition
PhotoSee Photo
Driven tools, C axis, Y-axis, tool eye
 
  228
IDMI7010
MakePARISHUDH
ModelTC 250 CNC
YOM2007
ConditionGood Condition
PhotoSee Photo
FURTHER DETAILS ATTACHED IN PHOTO
 
  229
IDMI7006
MakeVictor
ModelTN-02
YOM1985
ConditionGood Condition
PhotoSee Photo
TN-02
FURTHER DETAILS ATTACHED IN PHOTO
 
  230
IDMI7005
MakeVictor
ModelTNS-03
YOM
ConditionGood Condition
PhotoSee Photo
Model-TNS-03
FURTHER DETAILS ATTACHED
 
  231
IDMA31311
MakeSchaublin,Swiss
Model110
YOM
Condition
PhotoSee Photo
Centres height - 110mm
Center distance - 300mm
Swing over crosslide - 115mm
Spindle hole - 32mm
 
  232
IDMA31310
MakeSchaublin,Swiss
Model130
YOM
ConditionGood Condition
PhotoSee Photo
Diameter over the longitudinal bed - 500mm
Workpiece's diameter depending on tools - 160..220mm
Workpiece's length - 340mm
 
  233
IDMA31136
MakeWeiler
ModelDZ42
YOM1991
ConditionGood Condition
PhotoSee Photo
Siemns 880 T control
• Coolant device max. 4 bar
• Coolant supply by counterspindle
• Belt-type chip conveyor
• Oil mist centrifugal separator HMB AS
108
• Gravity band filter
• 2x 16-fold tool turret VDI 20
• various accessories
Technical Details:
Turning-Ψ 310mm
Support path X / Z axis 240/665 mm
Support path U / W axis 240/558 mm
Travel counter spindle 558 mm
main spindle
Clamping device Ψ 160 mm
Spindle head DIN 55026 A5
Spindle bore 53 mm
Bar passage 42 mm
Drive power 18.5 KW
Speed range 50 - 5000 1 / min
C-axis
counter spindle
Clamping device Ψ 110 mm
Spindle head DIN Ψ 80 H6
Drive power 5 KW
Speed range 50 - 5000 1 / min
C-axis
Weight Maschine 5900 kg
Space requirement machine (3200x2250x2150)
mm
Space required Gravity belt filter
(2400x1100x900) mm
 
  234
IDMA31035
MakeHitachi
Model
YOM1995
ConditionGood Condition
PhotoSee Photo
MAKE: HITACHI SEIKI CNC TURNING CELL
MODEL: TF20 with MR-6 robot loader
Control: Seicos L III,
Swing over the bed: 400mm,
Chuck diameter: 210mm,
Maximum turning diameter: 350mm,
Maximum turning length: 250mm,
Spindle Speed: 30-4500 rpm,
Spindle nose: A2-6,
Spindle though hole diameter: 59mm,
Turret: 10 station,
X-Axis: 180mm,
Z-Axis: 320mm,
MR-6 Loader with Stocker and Stacker
Weight: 3900 kg,
 
  235
IDMA31020
MakeTraub
Model
YOM2002
ConditionGood Condition
PhotoSee Photo
Loaded to truck
Visible in production
Video on demand
36mm bar passage, with option 42mm for billets
LG 4M20 Bar loader
4 axes
Some collets included
Tour numerique TRAUB TNK 36 Annee 2002
Passage 36 mm en pince et 42mm en mors
Chargeur automatique barres lg 4m20
4 axes
Outillage : quelques pinces de serrage
Model : TNK 36, 4 axes (2002)
 
  236
IDMA31001
MakeDoosan
Model
YOM2014
ConditionGood Condition
PhotoSee Photo
MAKE: DOOSAN CNC Lathe
MODEL: PUMA 480XL (2014) 600mm chuck, 3m between centres, Fanuc 32iA
CONTROLLER: Fanuc 32iA
FANUC 32iA CONTROL
600mm Chuck
160mm bore
2 axis control
60hp motor
1500rpm
630mm turning diameter
900mm max swing
3000mm turning length
Tailstock
 
  237
IDMA30816
Make
Model
YOM1990
Condition
PhotoSee Photo
20.8 inch swing over bed (500 mm)
333.3 inch center distance (8000 mm)
CNC – russian.
4 gear ranges, 4 - 600 RPM spindle speeds
Chuck – 630 mm Bison.
6-way electric turret , 1.6 inch tool capacity
rear chain type chip conveyors
Steady rest - 2pcs
Hydraulic tailstock
Leveling blocks

MACHINE Length - 14000 mm
Weight – 32000kg 64000lbs.
designed for panzer or cannon barrel
The RT711 CNC lathe is great for oil field and millitary applications.
 
  238
IDMI6908
MakeTakisawa,Japan
Model
YOM
Conditioncan be inspected under power
PhotoSee Photo
Fanuc ot.control.
12 station turret.
Between center 2 meters.
Chuck size. 700mm.
Spindle bore 180mm
 
  239
IDMI6907
MakeHankook
Model
YOM2002
Condition
PhotoSee Photo
MODEL: PRO TURN 100.
Swing over bed: 1000MM
Swing over slide: 800mm
Length: 2000MM
FANUC: 18-T.
twin turret tool holder
with conveyer and steady rest.
 
  240
IDMA30667
MakeFeeler,Taiwan
ModelFTC10
YOM2011
Condition
PhotoSee Photo
8 atation, 6 chuck, Without tailsock, spindle speed- 6000 rpm
 
  241
IDMA30610
MakeBoehringer,Germany
Model
YOM1991
Condition
PhotoSee Photo
BOEHRINGER VDF 400 C-U - control SINUMERIK 880 T, Circular diameter over bed slide 750 mm
Circular diameter over plan slide 700 mm
Tip width 2,000 mm
Main spindle:
Spindle head adapter Gr. 15, DIN 55026
Max. Speed 1800 min-1
Transmission stages 3
Power 53 kW
Turret:
Tool holder VDI 60, DIN 69880
Number of tool positions 12
Number of driven tool positions 6
C-axis
Tailstock:
Pinol diameter 130 mm
Quill stroke 120 mm
Headrest SK 40
Chip conveyor
Power Chucks
Div. tool holders
 
  242
IDMA30587
MakeCincinnati Machines
Model
YOM1997
ConditionExcellent
PhotoSee Photo
1 unit. CNC LATHE CINCINNATI FALCON 250 CNC LATHE. IN VERY NICE CONDITION
Year of manuf. 1997
Max. Turning Dia. 254 mm
Max/. Turning Length 500mm
Max. Dia. through Spindle 65mm
Spindle Speeds to 3500 RPM
Spindle Drive Motor 15KW
12 Station VDI Turret + All Tool holders
Tailstock with Programmable Quill Movement.
Machine Worklight.
Siemens Acramatic A2100 CNC Controls



1 unit: CNC LATHE CINCINNATI FALCON 200 CNC IN VERY NICE CONDITION
Year of manuf. 1997
Max. Machining Dia 250 mm
Max. Cutting Length 420 mm
52mm Dia Bar Capacity
Spindle Speeds to 4500 RPM
12 Station VDI 40 Turret/ Tailstock
11KW Spindle Motor
200mm Dia Power Chuck
Crawford CDC64 Collet Chuck
VDI 40 Toolholders
Siemens Acramatic A2100 CNC Controls
 
  243
IDMA30540
MakeGalaxy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Galaxy 8 inch chuck, Fanux Oi control
 
  244
IDMI6857
MakeMicron
Model
YOM1998
ConditionVery good condition
PhotoSee Photo
ASKAR MICRON SPINNER 10
Chuck Dia : 200 MM
ABC : 380 MM
Control : Siemens 810 D
 
  245
IDMI6856
MakeMicron
Model
YOM1997
Condition
PhotoSee Photo
Askar Micron Spinnar 20
Chuck 250 mm
Swing max 480 mm
Siemens 810 D
Chip Conveyor
Stabilizer
Manual
 
  246
IDMI6855
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
TATUNG TAIWAN
MODEL : TL-15S
Chuck : 250mm
Travels : X 400mm, Z 500mm
ABC : 550mm
Tail Stock : 8 Station Turret
With Chip Conveyor
Controller : Fanuc OTC
 
  247
IDMI6854
MakeYang
Model
YOM
Condition
PhotoSee Photo
ML-28A
Chuck : 250mm
Travel : X-Axis 415mm, Z-Axis 530mm
ABC : 600mm
Turret 8 Station
RPM 3000
Controller : FANUC OTC
With Tail Stock, Coolant Tank, Motor, Chip Conveyor,
 
  248
IDMI6851
Make
Model
YOM
Condition
PhotoSee Photo
TATUNG TAIWAN MODEL : TL-15S
Chuck : 250mm
Travels : X 400mm, Z 500mm
ABC : 550mm
Tail Stock : 8 Station Turret
With Chip Conveyor
Controller : Fanuc OTC
 
  249
IDMI6850
MakeYang
Model
YOM
Condition
PhotoSee Photo
Chuck : 250mm
Travel : X-Axis 415mm, Z-Axis 530mm
ABC : 600mm
Turret 8 Station
RPM 3000
Controller : FANUC OTC
Model: ML-28A
 
  250
IDMI6848
Make
Model
YOM2007
Condition
PhotoSee Photo


Ctx 310,
CTX 310, Swing 450
Job 310
Chuk 200
Abc 500
Also has sub spindle
Also has milling c axis and y axis
Fanuc 32i latest seires
 
  251
IDMI6847
MakeCampro
Model
YOM
ConditionGood Condition
PhotoSee Photo
CNC turning
Chuck 18"
Turning length 1100 mm
Fanuc oi td
Yr of manu 2011-09
Spindle hole 100 mm
With study & chip conveyor
 
  252
IDMI6846
MakeKirloskar Warner Swassey
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck dia,375
3 jaws & 4 jaws.
1500 ABC
Fanuc 11 T control
All AC Motors
 
  253
IDMI6828
MakeFeeler,Taiwan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck dia: 200 mm,
Cutting length: 350 mm,
Control: Fanuc OTC
12 station turret
 
  254
IDMI6827
MakeTongil,Korea
ModelTNL45
YOM
ConditionGood Condition
PhotoSee Photo
Chuck: 200 mm,
Admit: 800 mm,
12 stations turret,
Fanuc OT
 
  255
IDMI6821
MakeNakamura Tome,Japan
ModelTMC20
YOM1998
ConditionGood Condition
PhotoSee Photo
Chuck diameter: 200 mm,
Turret hydraulic vdi type 10 stations
Controller Fanuc
 
  256
IDMI6810
MakeLeadwell,Taiwan
ModelLTC30BP
YOM
ConditionGood Condition
PhotoSee Photo
500 maximum dia 1100 between centre
 
  257
IDMI6802
MakeTrub German
Model
YOM
ConditionGood Condition
PhotoSee Photo
ABC 850 mm,
Chuck dia: 200 mm,
Hust control
 
  258
IDMI6794
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Servo motor: 2 nos
Servo amplifier: 2 nos
Controller card : 1 nos
CRT : 1 nos
Control: Fanuc 15 TT
 
  259
IDMA30423
MakeHankook
ModelDynaturn15
YOM
ConditionGood Condition
PhotoSee Photo
1500 x 5000 mm,
Control: Fanuc 15M
 
  260
IDMA30392
MakeColchester
ModelCNC2000
YOM2009
ConditionGood Condition
PhotoSee Photo
Turning cap: 426 x 1250 mm,
Spindle hole diam: 54 mm,
Rev.Turret for 8 stations,
Cnc Fanuc Oi-T
Weight of machine 2,36 Kg
 
  261
IDMI6763
MakeHMT,India
ModelT70
YOM
ConditionGood Condition
PhotoSee Photo
aa
 
  262
IDMI6759
MakeGedee Weiler
Model
YOM2007-08
ConditionGood Condition
PhotoSee Photo
Chuck diameter: 135 mm,
Controller delta digital controller
Retrofitting with new controller in 2017
 
  263
IDMI6753
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) Make: Stanko
Model: PC3
Swing over bed: 1000 mm,
On carriage: 800 mm,
Tailstock
Steady rest,
ABC 5 mtr
With coolant arnagement
Control: Fanuc Oi Mate TD
2) Make: Skoda
Chuck dia: 1200 mm,
Swing over bed: 1000 mm,
Swing over on carriage approx: 800 mm approx,
Admit between center (ABC): 4000 mm approx, overhaul bed length: 5500 mm,
Four jaw chuck
Steady rest
Geared head stock
Tail stock with manual movement
Box guide ways
Square tool post 4 station
Control: Fanuc Oi Mate TD
 
  264
IDMI6746
Make-
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Dia-900,
Bed-4m,
Center Hight-450mm,
Between Center-3m,
Controller-Mitsubishi.
 
  265
IDMI6740
MakeW/S
Model
YOM
ConditionGood Condition
PhotoSee Photo
Between Center-2m,
Controller- Semins.
 
  266
IDMI6734
MakePride Banglore
Model
YOM2012
ConditionGood Condition
PhotoSee Photo
165 Chuck,
Fanuc oi mate td
Die 200
Length maybe 350
With Servo
 
  267
IDMI6729
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
200 Check semans control with tail stock and stabiliser
 
  268
IDMI6728
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
200 Check Fanuc td control with tailstock
 
  269
IDMA30328
MakeTsugami,Japan
ModelMA5-10P
YOM1995
ConditionGood Condition
PhotoSee Photo
Dimension pallets : 450 x 450 mm,
X axes : 560 mm,
Y axes : 350 mm,
Z axes : 580 mm,
N° tolls : 126,
N° palletts : 11,
Cnc : Fanuc 11M.
 
  270
IDMI6725
MakeCholchester
Model
YOM1996
ConditionGood Condition
PhotoSee Photo
1 mtr
Turning length: 1135 mm
Turning Dia : 200 mm
Control Fanuc OT
 
  271
IDMI6724
MakeCholchester
Model
YOM1994
ConditionGood Condition
PhotoSee Photo
2 MTR
Turning Dia: 370
Swing:500 mm
2100 plus between center
 
  272
IDMA30307
MakeMiyano
ModelBNJ42SY
YOM2010
ConditionGood Condition
PhotoSee Photo
FANUC 18i-TB control.
12 Station main turret by servo indexing motor that can be tooled up to 48 tools including power tools.
6 Station sub turret with power tools driven by servo indexing motor .
Left spindle for first operation work.
Right spindle for secondary operation work.
67 to 5,000 RPM left and right spindle speed.
15 Horsepower Fanuc AC left spindle drive motor.
7.5 Horsepower Fanuc AC right spindle drive motor.
0.2 Second/station turret indexing (main turret).
0.2 Second/station turret indexing (sub turret).
Bi-directional turret indexing on both main and sub turrets.
Y-Axis on main turret.
Left & right spindle synchronous control.
Overlapping control for simultaneous machining.
C-axis left & right spindle control.
Rigid tap function for both spindles.
Revolving tool attachment on main turret.
3.3 Horsepower revolving tool drive unit.
4-Axis simultaneous machining.
First and secondary operation can be performed simultaneously.
Free position indexing of each cutting tool.
Left & right spindle orientation for hexagon and square bar work part transfer.
Exclusive left and right spindle combination tool holders reduce turret indexing.
Inner high pressure (160 psi) coolant/air for right spindle.
IEMCA Kid 70 magazine bar loader serial number 020638OA03.
Chip conveyor.
Full set of live tools and tooling and collets as shown.
Full set of documentation.
One owner from new.
Machine maintained by Citizen service engineers and in perfect working order.
 
  273
IDMA30306
MakeNakamura Tome,Japan
ModelTW20
YOM1988
ConditionVery good condition,Under power
PhotoSee Photo
2 x spindles,
2 x 12 posts turrets,
Bar dia: 51 mm
1 x C axis,
3 x live tools
Nakamura Tome (Fanuc OT) controller
Interface for bar feeder
 
  274
IDMA30281
MakeGildemeister,Germany
ModelCTX420 Linear
YOM2003
ConditionGood Condition
PhotoSee Photo
Heidenhain Turn Plus
With C and Y axis
Rotating length 600 mm
Rpm, max 5000
25 kW spindle
Collet chuck and about 10 pcs.
Machine has new head spindle
 
  275
IDMI6711
MakePMT
Model
YOM2005
Condition
PhotoSee Photo
165 mm Chuck 300 length PMT SUPERCUT 6, Fanuc oi Tc control
 
  276
IDMI6710
MakePinacho
Model
YOM2007
Condition
PhotoSee Photo
2 meter flat , 10" chuck Fanuc oi Tc control , Smart 220, 2000 mm length, Hydraulic chuck Hydraulic Tailstock 4way square Turret 200 maximum running dia
 
  277
IDMA30266
MakeWohlenberg
ModelM1000
YOMReconditioned in 2006
ConditionGood Condition
PhotoSee Photo
Swing over Bed: 1000 mm
Centre Height: 500 mm
Swing Over Cross Slide: 630 mm
Faceplate Dia.: 900 mm
Width Of Bed: 670 mm
Centre Distance: 8000 mm
Main Motor Power: 60 Kw
Main Spindle Bore: 165 mm
Work Piece Weights:-
* With 1 Steady: 5 tons
* With 2 Steady: 6.3 Tons
* With 3 Steady: 8 Tons
Speeds Of Main Spindle: 0.355 – 710
retro-fit with Siemens 802 D Control (the machine was an NC machine before)
 
  278
IDMI6702
MakeMiyano
Model
YOM2005
ConditionGood Condition
PhotoSee Photo
Chuck dia: 165 mm,
Fanuc 21 T
 
  279
IDMI6700
MakeHardinge
ModelConquest-T42
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size : 165/200,
With live tools,
Complete set of collets,
Fanuc : 18T.
 
  280
IDMA30223
MakeColchester
ModelCNC2000
YOM2009
ConditionGood Condition
PhotoSee Photo
Max. swing diam. over bed: 400 mm
Max. turning diam. over carriage: 246 mm
Distance between centres: 1250 mm
Spindle bore diam.: 54 mm
Spindel speed range: up to 6…2750 Rpm
Carriage traverse: 210 mm
Feed range: 0,0001 - 40,0000 mm/rpm
Feed rate: 1 - 5000 mm/min
Rapid travel range: 6 m/min
Revolve Turret head for: 8 positions of tools
Tailstock : MK 5
Tailstock traverse : 155 mm
Power of maindrive motor: 7,5 kW
14. Weight of machine: 2300 kg
15. Dimensions (l x w x h): 2740 x 1500 x 1860 mm
Accessories:
Service Manual Books
Hydraulic chuck 3 jaws
Coolant unit with pump
Turret 8 tools
Control: CNC Fanuc O-T
 
  281
IDMA30218
MakeMazak,Japan
ModelIntegrex60 x 2000U
YOM1991
ConditionGood Condition
PhotoSee Photo
MAZATROL T32-3
21” chuck ATC30
w/ Tail stock and Chip conveyor
 
  282
IDMA30186
MakeMori Seiki
ModelSL20
YOM1991
ConditionGood Condition
PhotoSee Photo
Max Dia : 210 mm,
Max Turning length : 520 mm,
Max Swing : 450 mm Dia,
Control : T5F-Moric (FANUC-15TF).
 
  283
IDMA30157
MakeBinns and Berry Craven
Model
YOM2000
ConditionGood Condition
PhotoSee Photo
1000mm x 3000mm.
Swarf conveyor.
12 station tool changer.
1000mm swing.
3 point steady.
Tailstock.
3 & 4 jaw chucks.
Sauter turret.
Fanuc 21it control.
 
  284
IDMA30156
MakeBinns and Berry Craven
Model
YOM2001
ConditionGood Condition
PhotoSee Photo
1000 mm x 6000 mm.
Fanuc 21it control.
Sauter turret.
Driven tools and C axis (Milling).
Steadies.
 
  285
IDMA30146
MakeHaas
ModelHL2
YOM
ConditionGood Condition
PhotoSee Photo
Travels (X/Z) : 8.45” x 20”,
Swing Over Apron : 20”,
Swing Over Cross Slide : 9.5”,
Distance Between Centers : 24”,
Rapid Traverse All Axes : 710 IPM,
Spindle Nose : A2-6,
Spindle Bore : 3”,
Draw Tube Bore : 2.6”,
Spindle Speeds : 3750 RPM,
Spindle Motor : 15/20 HP,
Turret Capacity : 10 Stations,
Dimensions : 98” x 70” x 70”,
Weight : 9,000 lbs.
Parts Catcher.
Chip Conveyor.
Collet Nose, As Shown In Photo.
No Tooling Included.
 
  286
IDMI6657
MakeMori
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck : 380 mm,
Swing : 600 mm,
BC : 1000 mm,
Max turning : 500 mm,
Control : New Mitsubishi M 70.
 
  287
IDMA30094
MakeMazak,Japan
ModelSlant Turn 80N x 3000
YOM
ConditionGood Condition
PhotoSee Photo
80N x 3000 mm
 
  288
IDMA30049
MakeTuscan
ModelLC38
YOM2007
ConditionGood Condition
PhotoSee Photo
Swing over bed : 970 mm,
Swing over cross slide : 600 mm,
Centre Height : 490 mm,
Width of carriage : 885 mm,
Centre distance : 4300 mm,
Bed Way : 3-v way with 1 flat way,
Spindle bore : 153 mm,
Spindle Speeds : 4 – 1800 RPM,
Spindle Power : 30/37 Kw,

Complete With:-
Turret: H4-250 VDI hydraulic quick change.
Lubrication Pump : 25 W.
Coolant pump : 1/2 HP high presure.
Front & Rear Chip conveyor.
Full Enclosed Guarding.
Steadies up to 600 mm Dia.
150 mm boring bar attachment that takes 1500 mm boring bar.
Control: Fanuc OiTD with colour screen.
 
  289
IDMA30036
MakeHass
ModelST-30
YOMNew 2015
ConditionGood Condition
PhotoSee Photo
Swing Over Front Apron : 31.75"
Swing Over Cross Slide : 20.75"
Maximum Cutting Diameter : 21.0"
Maximum Cutting Length : 26.0"
Travels
X-Axis : 12.5"
Y-Axis : 26.0"
Rapid Traverse Rate – Both Axes : 945" / Min.
Spindle Speeds : 3400 RPM
Spindle Nose : A2-6
Spindle motor : 30 HP 3/60


Equipped With:
Haas CNC Control w/ 15" Color LCD Monitor and USB Port
10" Hydraulic Chuck
12-Position Turret
Tail stock
Rigid Tapping
Work Gauging Probe
Expanded Memory
Cooler Unit for Electronics
 
  290
IDMA29888
MakeGildemeister,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
lap Index G300 1995 with its feeder + 2 doors
rotating tool chuck + 1 + 1 + documentation door clamp manufacturer
- 1 round Gildemeister Sprint 65 years in 1997 with its feeder
Door + 1 + 1 pliers + chuck manufacturer documentation.
Siemens cabinet 840C.
disconnected
(Since June 2016), sprinting 65 at the door
Access electrically locked work area and
therefore can not be opened before power is restored.
 
  291
IDMA29800
MakeTornos
ModelM7
YOM1989-1993
ConditionGood Condition
PhotoSee Photo
There are more, than 30 such lathes available for sale
Number of turning tool holders - 5
Turning diameter - 7 mm
Spindle speed - 10000 rpm
Dimensions - 1500 x 600 x 1500mm
Weight - 800 kg
 
  292
IDMA29793
MakeTraub
ModelTNM42
YOM1996
ConditionGood Condition
PhotoSee Photo
Bar feed max : 3200 mm,
Hours of operation : 43682,
Accessories : canal Ψ 11.5 – 14 mm,
Basic holder on tool slide,
Pick up spindle mounted on turret.
control TX 8 F.
 
  293
IDMA29790
MakeAMUTIO EMAG
ModelVL3
YOM2014
ConditionGood Condition
PhotoSee Photo
No. of axis: 3
Rapid traverse in X/Y/Z: 60/-/30 m/min
Swing diameter over bed cover: 210 mm
Working diameter, max.: 130 mm
Working length, max.: 110 mm
Clamping chuck diameter,
main spindle:
165 mm
Power, main spindle at 100/40%
usage:
16/25 kW
Revolutions, main spindle: 7500 1/min
Torque, main spindle at 100/40%
usage:
85/134 Nm
No. of tools per turret: 12
Tool reception in turret: VDI 40
Power requirement: 28 kW
Dimensions (L x W x H): 3600x1900x2300 mm
Weight: 5500 kg
 
  294
IDMA29732
MakeMazak,Japan
ModelQuickturn8
YOM
ConditionGood Condition
PhotoSee Photo
Mazatrol Cam T2 Control
Turret, Tooleye and Tailstock
 
  295
IDMA29708
MakeHardinge
ModelCHNC1
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc OT control,
16 c collet spindle
The machine is not under power, but was running good the last time in use.
 
  296
IDMA29705
MakeMonarch,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc 11 t control
 
  297
IDMA29699
MakeNardini
ModelFast Trace VS
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc 20 control,
With chuck,
With tailstock,
The machine is not under power, but was running good the last time in use.
 
  298
IDMA29696
MakeStorm
Model--
YOM1996
ConditionGood Condition
PhotoSee Photo
Fanuc OTC control
Turret,Chuck and tailstock
The machine is not under power, but was running good the last time in use.
 
  299
IDMA29653
MakeWFL Voest Alpine
ModelMillturn M100
YOM1997
ConditionGood Condition
PhotoSee Photo
Turning Length: 3000 mm.
Max swing: 930 mm.
Max turning diameter: 850 mm.
Spindle speed: 1600 rpm.
Max. milling speed: 6000 rpm.
Coolant through spindle: 80 bar.
B-axis: -110/+90 grader.
Y-axis: 600(-200/+400) mm.
Tailstock diameter: 180 mm.
ATC Capto C8: 36 tools.
Spindle effect: 63 kW.
Milling effect: 25 kW.
1 Hydraulic SMW support diam 50 – 310 mm.
1 Hydraulic SMW support diam 160 – 460 mm.
Control: Sinumerik 840C.
 
  300
IDMA29613
MakeMazak,Japan
ModelIntegrex100-IISY
YOM2003
ConditionGood Condition
PhotoSee Photo
First axis: 6#hallow 6000 rpm, 0.001° index ・C Axis Control,
Second axis: 6#hallow 6000 rpm, 0.001° index・C Axis Control,
Workable Range: φ470Χ727 mm,
Revolution tool: 10000 rpm ( Spindle Through Coolant attached),
B axis Control(0.001°),
Y axis attached ,
ATC40 tools (CAPTO),
gantry Attached (FLEX-GL75F),
Bar feeder attached ASQ-51model(Alps tools ),
Part catcher,
Tool Eye,
Chip Conveyor,
Control:Mazatrol Fusion 640MT
 
  301
IDMA29609
MakeMori Seiki
ModelSL65a
YOM
ConditionGood Condition
PhotoSee Photo
Maximum swing over bed: 35.0"
Maximum swing over cross slide: 22.0"
Distance between centers: 35.4"
Max turning diameter: 32.3"
Bar work capacity: 3.5"
X axis travel: 17.1"
Z axis travel: 33.9"
Spindle speeds:93-280 RPM (1st range),
220-660 RPM (2nd range)
600-1800 RPM (3rd range)
Spindle nose: A1-11
Through spindle hole: 4.1"
Spindle bearing inner diameter: 6.7"
Number of tool stations: 12
Turret indexing time: 1.5 sec/1 station
Rapid traverse (X): 196.9 IPM,
Rapid traverse (Z): 315 IPM,
Tail stock travel: 26.8"
Tail stock spindle diameter: 4.3"Taper hole of tailstock spindle: MT4
Tail stock quill travel: 3.9"
Equipped with
Moric T6F (fanuc 16 T) CNC control
(1) 16" 4-Jaw independent manual chuck,
(1) 12" 3 -Jaw hydraulic chuck (solid, no thru hole),
50 HP/40 HP main drice,
Chip conveyor,
Assorted tooling,
Approximate overall dimensions: 4826 x 2032 x 2489 mm,
Approximate weight: 9070 Kg.
 
  302
IDMI6518
MakeMori Seiki
ModelTL40/3000
YOM1990
ConditionGood Condition
PhotoSee Photo
Maximum swing over bed: 610 mm,
Swing over cross slide: 375 mm,
Max. turning diameter: 375.5 mm,
Max. machining length: 2875 mm,
Distance between centers: 3050 mm,
Spindle bore: 82.5 mm,
Chuck size: 300 mm,
Spindle nose: A2-8
Spindle speeds: 12-2500 RPM,
Turret configuration: 8 station,
X axis travel: 231.25 mm,
Z axis travel: 2900 mm,
Main motor: 30 HP,
Equipped with:
Brand new mitsubishi E70 CNC control
12" hydraulic chuck
Tailstock
Chip conveyor,
Totally new electrials and drives.
 
  303
IDMA29551
MakeOkuma,Japan
ModelLB15II-MY
YOM1995
ConditionGood Condition
PhotoSee Photo
Milling attached /Push cup attached,
Bet center: 500 mm,
Chuck: 10 inch,
Bite 12 claws holder,
Control: OSP-7000
 
  304
IDMA29548
MakeNiles-Simmons
Model
YOM2003
ConditionGood Condition
PhotoSee Photo
Max. turning diam. over bed : 635 mm,
Max. turning diam. over saddle : 400 mm,
Long. travel : 370/3.400 mm,
Max. turning length : 3.000 mm,
Max. work load without steadies : 1.800 kg,
Max. work load (flying) : 250 kg,
Spindle bore : 112 mm,
Driven tools (DIN 69880) 12,
Turret VDI : 50,
Stepless rpm : 10 – 3.000 UpM,
Feeds : 0,1 – 12.000 mm/Min.,
Rapid traverse : 24/12 m/Min.,
Feeds : 16/10 kN,
Spindle drive : 37/46 kW,
Tailstock - sleeve diameter : 135 mm,
Stroke of sleeve : 150 mm,
Overall size : 4.530 x 2.700 x 2.600 mm,
Weight : 12 to.
CNC-control SIEMENS – SINUMERIK 840 D.
12 driven tools (max. 2.320 rpm.).
Chip conveyor.
Tailstock MK 5.
Coolant.
12-fold turret VDI 50.
 
  305
IDMA29546
MakeTsugami,Japan
ModelSS20M
YOM2013
ConditionGood Condition
PhotoSee Photo
Max. working diameter: 20 mm,
Main spindle speed: 200-10000 rpm,
Back spindle speed: 200-12000 rpm,
Tooling speed: 300-30000 rpm,
ATC: 24,
COntrol: Fanuc 32iB
 
  306
IDMA29531
MakeCincinnati,USA
ModelFalcon200
YOM1995
ConditionGood Condition
PhotoSee Photo
Max Swing Over Bed: 521.5 mm,
Max Swing Over Carriage:246 mm,
Max Tail stock Position: 437.5 mm,
Max Machinable Center Distance: 413.25 mm,
Standard Chuck Size:206.25 mm,
Cross Travel (X-Axis): 211.25 mm,
Longitudinal Travel (Z-Axis): 413.25 mm,
Feed Range (Infinitely Variable): 01-630 IPM,
Number of Turrets:1
Tool Positions: 12 Total
Spindle Bore:50 mm
Spindle Nose: A2-6
Spindle Speed Range (1 RPM Increments):40-4500 RPM
Spindle Horsepower:15 HP
Approximate Machine Dimensions: 2745 x 1375 mm
Approximate Machine Heigh 1925 mm,
Approximate Machine Weight: 6,600 LBS,
Control: Siemens Acramatic 2100
 
  307
IDMA29383
MakeMazak,Japan
ModelSlant-40N.ATC-MC
YOM1987
ConditionGood working condition
PhotoSee Photo
Chuck size : 380 mm,
Swing over bed : 540 mm,
X axis travel : 550 mm,
Z axis travel : 1602 mm,
C axis (milling axis) : Yes,
Spindle speed : 4-2200 rpm,
Tool storage capacity : 32 pcs,
ATC : Yes,
Max cutting diameter : 335 mm,
Max cutting length : 1510 mm,
Spindle though hole dia.: 80 mm,
Power supply : 200 V x 3 phase,
Control system : Mazatrol cam T-3,
Number of axis : 4.
 
  308
IDMI6447
MakeTakisawa,Japan
ModelTC20
YOM
ConditionVery good condition
PhotoSee Photo
Chuck dia: 200 mm,
BC: 350 mm,
RPM: 6000,
Control: Fanuc 18T
 
  309
IDMA29324
MakeMori Seiki
Model15SL
YOM1988
ConditionGood Condition
PhotoSee Photo
Max. turning diameter: 160 mm,
Max. turning length: 525 mm,
Max bar diameter: 41 mm,
Max spindle speed: 6000 rpm,
Driven tools
 
  310
IDMA29295
MakeHass
ModelTL-15
YOM2004
ConditionGood working condition
PhotoSee Photo
Turning diameter : 208 mm,
Turning length : 445 mm,
Weight : 4.3 t.
 
  311
IDMA29293
MakeGildemeister,Germany
ModelCTX500E Serie2
YOM2003
ConditionVery good condition
PhotoSee Photo
Max. swing over bed: 680 mm,
Max. swing over slide: 455 mm,
Cross travel: 320 mm,
Lenght travel: 1.097 mm,
Spindle speed: 18-3.600 rpm,
Spindle hole: 107 mm,
Number of tooling stations: 12,
Machine weight: 8,7 ton,
Control: Heidenhain CNC
 
  312
IDMA29289
MakeGildemeister,Germany
ModelNEF400
YOM2005
ConditionGood Condition
PhotoSee Photo
Max. turning diameter : 350 mm,
Max. turning length : 650 mm,
Max. turning diameter form rod : 63 mm,
Spindle junction : ASA6,
Spindle speed range : 4000 Rpm,
Turret positions : 8,
Main motor power : 12 kW,
CNC : FANUC 210iS-T.
 
  313
IDMA29273
MakeMori Seiki
ModelSL35MC
YOM
ConditionGood Condition
PhotoSee Photo
MF-T4.
Between Centers : 750,
Turret : 12 tools,
Chuck : 15 inch,
Chip conveyor.
 
  314
IDMA29252
MakePinacho
ModelST285x1500
YOM2014
ConditionGood Condition
PhotoSee Photo
Swing over bed: 570 mm,
Distance between centers: 1500 mm,
Main drive: 11 kW,
Spindle speed: 0-2500 rpm,
Spindle bore: 80 mm,
Tailstock MT5,
Equipment/Accessories
Control Fanuc Oi mate -TD; Turret 8 places, electronic hand wheels for X and Z axis central lubrication system, coolant equipment, mchine lamp, 3 jaw chuck diam 250 mm, chip conveyor
 
  315
IDMA29234
MakeNakamura Tome,Japan
ModelTW8
YOM1997
Conditionexcellent working condition
PhotoSee Photo
Collet chuck,
(ASP-40),
REV : 60-6000,
Main spindle sub-spindles : 12 corners,
Bar : 3 m (oil feeder),
2 level,
Chip conveyor (the right⇒ back stock),
Mist collector,
FANUC-21iTB.
 
  316
IDMA29231
MakeMazak,Japan
ModelIntegrex30y
YOM1998
ConditionGood Condition
PhotoSee Photo
Mazatrol T Plus,
ATC 40,
10 inch 3 claw chuck,
Distance between : 1380,
Tail Stock,
Tool Pre-set,
Conveyor.
 
  317
IDMA29230
MakeNakamura Tome,Japan
ModelWT150
YOM2008
ConditionGood Condition
PhotoSee Photo
Collet Spindle (SAD-50),
12 Tools turret (compound)
Y axis /Sub-spindle : 6,
INCH 3 Claws Chueck,
Lower : 12 corner turret,
(compound) With a tool,
Gantry,
Tools Pre-set,
Gantry loader,
Chip Conveyor,
Work stocker : 10 st,
Work out going conv,
Auto Bar 4m.
FANUC-18iTB.
 
  318
IDMA29218
MakeGraziano
ModelSAG241500
YOM1988 Retrofit 2002
ConditionGood Condition
PhotoSee Photo
Chuck size : 500 mm (AUTOBLOC),
Between centres : 3000 mm,
Swing over cross slide : 670 mm,
Swing in gap : 1070 mm,
500 mm autobloc power chuck,
2 autoomatic turrets, front and rear,
2 x steady (350 mm + 650 mm),
Swarf conveyor,
Vee bed.
160 mm spindle bore.
Control : Fanuc 0T-C.
 
  319
IDMA29200
MakeRomi
ModelM680
YOM2001
ConditionGood Condition
PhotoSee Photo
Chuck Size: 460mm (18") Dual chuck - one on each end of headstock
Control: FANUC 21i-T
Distance between centres: 3000mm
Spindle bore: 160mm
Turret positions: 8
Spindle motor power: 22/30kW
Swing: 680mm
Swing over the cross-slide: 430mm
Coolant, low volt light
4 point open roller steady
3 point closed roller steady
Additional Equipment: Turret takes up to 20 & 100m boring bars, 2 x steadies
 
  320
IDMA29134
MakeColchester
ModelCombi
YOM2000
ConditionGood Condition
PhotoSee Photo
Distance between center 2000 mm
with Fanuc control
Turning lenght 2000 mm
Turning Ψ over bed 400 mm
Turning Ψ over sledge 240 mm
spindle speed 25-2500 rpm
Spindle hole 54 mm
Rapid feed x, z 8/10 m/min
Drive capacity 11kW
Weight ca. 3300 kg
 
  321
IDMA29133
MakeTakisawa,Japan
ModelTX1
YOM
ConditionGood Condition
PhotoSee Photo
Diameter : 210 mm x Distance between center 400 mm,
X axis : 125 mm,
Z axis : 420 mm,
Instep feed revolver,
Head surface : 450 mm,
Spindle head : A1-6 ASA,
Spindle drilling :-
Diameter : 52 mm,
Spindle cone : MK6,
Machine bed width : 430 mm,
CNC Control : Astro Fanuc.
Digital broad control unity.
 
  322
IDMA29132
MakeGildemeister,Germany
ModelCTX400
YOM
ConditionGood Condition
PhotoSee Photo
12-fold disc revolver (of it 6 tools drived),
Top height : 500 mm,
Plan way : 212 mm,
Lδngsweg : 640 mm,
1 Spδneausfφrderer,
Weight : 5,14 to.
Control. Cnc Gildemeister
 
  323
IDMA29131
MakeGildemeister,Germany
ModelNEF-CT40
YOM
ConditionGood Condition
PhotoSee Photo
Max turning diameter : 225 mm,
Max. rotary length : 600 mm,
Revolver head with 12-fold Tool holder VDI-30,
Weight : 4. 5 to.
 
  324
IDMA29130
MakeGildemeister,Germany
ModelNEF-CT40
YOM
ConditionGood Condition
PhotoSee Photo
Max turning diameter : 225 mm,
Max. rotary length : 600 mm,
Revolver head with 12-fold Tool holder VDI-30,
Spindle rotations : 5000 / P.min.
Grip on main spindle : fi-200 mm,
Chill system,
Chip convoyer,
Hydr. tailstock,
Weight : 4. 5 ton.
Control : Moor grove pilot CNC EPLII.
 
  325
IDMA29129
MakeMiyano
ModelBND34S3
YOM1996
ConditionGood Condition
PhotoSee Photo
1 turret head,
Coolant system,
2 spindles,
Weight : 4 tons.
Fanuc Series 18-T.
 
  326
IDMA29128
MakeMonfort,Germany
ModelMMC5
YOM1989
ConditionGood Condition
PhotoSee Photo
With tool turret with : 12 tool stations,
Max. Turning length : 1100 mm,
With a CNC Screen Control Monforts Control system F,
1x chip conveyor,
1 x separate control / cabinet Fanuc,
Incl. documentation.
 
  327
IDMA29122
MakeTornos Bechler
ModelENC264
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 26 mm,
Length : 300 mm,
Mid : 90's vintage,
Live tools FANUC.
Machines Equipped :
With indexing,
Sub Spindle,
Live Tools,
4m bar loaders.
 
  328
IDMA29116
MakeNakamura
ModelTW20
YOM
ConditionGood Condition
PhotoSee Photo
Maximum turning diameter: 270 mm,
Distance between centers: 1080 mm,
5000 rpm,
Main spindle bar capacity: 51 mm,
Turret1:12 3600 rpm,
Turret2:12 3600 rpm
Control: Fanuc 18
 
  329
IDMI6393
MakeSculfort
Model
YOM
ConditionGood Condition
PhotoSee Photo
Face plate : 1800 mm,
Admit between center : 3000 mm.
 
  330
IDMA29071
MakeH. Ernault Somua
ModelHES600
YOM1983
ConditionGood Condition
PhotoSee Photo
Maximum length : 1600
Max Diameter: 600
Turret: 12 tools
NUM 1060
 
  331
IDMA29057
MakeSchaublin,Swiss
Model150
YOM
ConditionGood Condition
PhotoSee Photo
Centers height: 150 mm,
Center distance: 630 mm,
Swing over bed: 340 mm,
Spindle speed: 55...3000 rpm,
Dimensions: 1715 x 970 x 1280 mm,
Weight: 1250 kg.
 
  332
IDMA29049
MakeCitizen
ModelM20
YOM1996
ConditionGood Condition
PhotoSee Photo
3 position live drilling ststaion
5 position forming tool station
6 station turret with 6 static or live tool positions
Quantity of various collets
FMB magazine bar loader
 
  333
IDMA29048
MakeCitizen
ModelA20
YOM2007
ConditionGood Condition
PhotoSee Photo
Max. turning dia: 20 mm,
Max. turning length: 165 mm,
Max. drilling dia for main spindle: 10 mm,
Max. tapping dia for main spindle: M8,
Spindle motor: 2.2/3.7 Kw,
Spindle speed: 8000 rpm,
Controller: Fanuc 32i TA,
With Fedek M20 bar feeder(3M),
Cutting tool holder: 7 pcs,
Rotary tool holder: 3 pcs,
Drilling tool holder: 4 pcs (front and rear share)
 
  334
IDMA29047
MakeCitizen
ModelK16 type VI
YOM2007
ConditionGood Condition
PhotoSee Photo
5 turning / forming tools
4 rotary tools
4 position front drilling tool station
4 position rear drilling tool station
Fire suppressant system
Parts conveyor
IEMCA Genius 118 magazine bar loader
 
  335
IDMA29043
MakeCitizen
ModelM20
YOM1995
ConditionGood Condition
PhotoSee Photo
Max turning dia: 20 mm,
Max turning length: 320 mm per chuck,
Spindle speed: 8,100 rpm,
Control: Cincom system,
With Pro HP 326 barfeeder
 
  336
IDMA29042
MakeCitizen
ModelL20VII
YOM2000
ConditionExcellent
PhotoSee Photo
4 Position live drilling station: 4 live tools,
5 Position linear forming tool station: no tools,
3 Position front drilling station: 1 static tool holder,
3 Position rear drilling station: 1 static tool holder,
Control: Cincom
 
  337
IDMA29041
MakeCitizen
ModelL16
YOM1997
ConditionGood Condition
PhotoSee Photo
Max. machining dia: 15.75 mm,
Max. machining length: 196.75 mm,
Max. drilling dia: 7.75 mm,
Spindle speed: 10,000 rpm,
Rotary spindle speed: 5,000 rpm,
With barfeeder,
Control: Cincom
 
  338
IDMA29037
MakeGildemeister,Germany
ModelCTX400
YOM1996
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 420 mm,
Max. oiece diameter on the bed : 570 mm,
Max. work piece length : 635 mm,
C axes,
Bar capacity : 79 mm,
Spindle speed range : 25-5000 Rpm,
Feed speed : 4000 mm/min,
Rapid speed X-Z : 20 - 24 mt/min,
Movement: X axes : 212 mm. - Z axes : 640 mm,
Main motor power : kW 21,
Turret positions : 12,
Dimension : 3800 x 1750 x H 1750,
Machine weight : 5800 Kg. Ca.
Cnc: Heidenhain PILOT.
 
  339
IDMA28994
MakeOkuma,Japan
Model2SP-35HG
YOM2007 / 2000
ConditionGood Condition
PhotoSee Photo
1) OKUMA 2SP-35HG (2007).
2SP/L8 in *3 claw Chuck +R8in *Claw Chuck,
Cutter dice : V12+V12,
Max Dia : φ380,
Max length : 230,
2000 rpm,
Gantry Loader.
Fanuc-18iT.
2) OKUMA 2SP-35HG (2000).
2SP/ L8 in *3 claw Chuck +R8in *Claw Chuck,
Cutter dice : V12+V12,
Max Dia : φ380,
max Length : 230,
2000 rpm,
Gantry Loader.
 
  340
IDMA28933
MakeMazak,Japan
ModelQT25C
YOM1998
ConditionGood Condition
PhotoSee Photo
Chuck Size : 200 mm Hydraulic Chuck,
Maximum Swing : 433 mm,
Swing Over Bed : 250 mm,
Maximum Bar Work : 69 mm,
X Axis Travel : 177.25 mm,
Z Axis Travel : 503.125 mm,
Spindle Nose / Spindle Bore : A2-200 / 78.75 mm,
Spindle Speeds : 36 ~ 3,600 RPM,
Spindle Motor : 25 HP,
Turret Type : 8 Position Turret,
Rapid Traverse X,Z : 1181 IPM,
Machine Dimensions : 2450 x 1525 mm,
Machine Weight : 11,000 lbs.
Equiped with :-
200 mm 3 Jaw Hydraulic Chuck,
Complete Coolant System,
RS-232C Port for DNC Interface,
Chip Conveyor.
Qty : 2 nos
 
  341
IDMA28909
MakeCitizen
ModelM16III
YOM2001/2002
ConditionGood Condition
PhotoSee Photo
Main spindle
Main spindle speed:10,000 rpm,
Max. machining dia: 16 mm,
Max. turning length W/O re chucking: 200 mm,
Through hole dia: 20 mm,
Sub spindle
Sub spindle speed:10,000 rpm,
Max. machining dia: 16 mm,
Control: CINCOM system.
2 machines.
 
  342
IDMA28861
MakeOkuma,Japan
ModelLB2500EX
YOM2010
ConditionGood Condition
PhotoSee Photo
OSP-P20L,
8 Inch Chuck,
12 tools Turret,
Center,
Chip Conveyor,
45-5000 rpm.
 
  343
IDMA28859
MakeMurata
ModelMW30
YOM1990
ConditionGood Condition
PhotoSee Photo
2 Spindle,
F-0TT,
Dia : 540,
12 inch chuck Χ 2 .10 tools Χ2 
35~3500 rpm, 15Kw, X-250 Z-265 
chip conveyor.
 
  344
IDMA28858
MakeMori Seiki
ModelTL40B
YOM1989
ConditionGood Condition
PhotoSee Photo
F-10T,
Dia : 620Χ2115,
12 inch Hydralic
Chuck 25~2500 rpm,
Auto lock.
 
  345
IDMA28857
MakeMori Seiki
ModelSL45B
YOM1991
ConditionGood Condition
PhotoSee Photo
MF-T4(F-0TC),
Dia : 670Χ1180, 
Dia : 490 
Cross dia : 460,
12 tools,
X-270 Z-1600,
Chip conveyor.
 
  346
IDMA28856
MakeNakamura Tome,Japan
ModelTMC200
YOM1992
ConditionGood Condition
PhotoSee Photo
F-16 T,
Max. work: dia 300 x 350 mm,
Kitagawa N-8 chuck,
42~5000 rpm,
Mill:30~3600 rpm,
12P turret,
Chip conveyor
 
  347
IDMA28854
MakeMori Seiki
ModelSL35
YOM1994
ConditionGood Condition
PhotoSee Photo
Moric-T7Y,
12 inch Chuck,
10 tool turret,
Cross 425,9~2500rpm,
Chip Conveyor.
 
  348
IDMA28853
MakeOkuma,Japan
ModelLB25
YOM1991
ConditionGood Condition
PhotoSee Photo
OSP5020L,
10 inch chuck,
12 tools turret,
Chip conveyor.
 
  349
IDMA28852
MakeOkuma,Japan
ModelLB250T
YOM2006
ConditionGood Condition
PhotoSee Photo
OSP-E106,
8 Inch Chuck,
12 tools Turret,
Center, Chip Conveyor.
 
  350
IDMA28851
MakeOkuma,Japan
ModelLB2500EX
YOM2008
ConditionGood Condition
PhotoSee Photo
OSP-P20L, 
8 Inch Chuck,
12 tools Turret,
Center, Chip Conveyer.
 
  351
IDMA28850
MakeOkuma,Japan
ModelLB35II
YOM1997
ConditionGood Condition
PhotoSee Photo
OSP7000L,
8 Inch Chuck,
12 tools Turret,
Center, Chip Conveyer.
 
  352
IDMA28849
MakeOkuma,Japan
ModelLB9
YOM1992
ConditionGood Condition
PhotoSee Photo
OSP500L-G, 
6 Inch Chuck,
8 tools Turret,
Center.
 
  353
IDMA28848
MakeMori Seiki
ModelCL-153
YOM1999
ConditionGood Condition
PhotoSee Photo
MSG-803(MELDAS),
6 inch chuck, 
12 tools Turret,
Center, Chip Conveyer.
 
  354
IDMI6364
MakeHankook
Model
YOM
ConditionGood Condition
PhotoSee Photo
Std. chuck size (main): 800 (254 bore) mm,
Spindle bore/bar capacity:254 mm,
Swing diameter over bed:950 mm,
Swing diameter over cross slide/carriage:630 mm,
Max. turning diameter:950 mm,
Max. spindle length:1,845 to 7,845 mm,
Max. spindle speed:630 rpm,
No .of spindle speed range:2 auto,
Spindle bore:254 mm,
Turret/Toolpost type :H4[option V8]
No. of stations:4 [ option 8]
Rapid traverse rate X:4 m/min,
Rapid traverse rate Z: 6 m/min,
Axis travel X: 535 mm,
Axis travel Z: 1,845 tp 7,845 mm,
Tailstock type:pull along by saddle,
Main spindle motor:30 [37] kW
 
  355
IDMA28802
MakeCincom
ModelL10
YOM2000
ConditionGood working condition
PhotoSee Photo
Spindle speed : 300~12000 rpm,
Tool storage capacity : 12 pcs,
ATC : Yes,
Max cutting diameter : 10 mm,
Max cutting length : 85 mm,
Spindle though hole dia.: 11 mm,
Bar feeder,
Max drilling capacity : 6 mm,
Max tapping and die cutting capacity : M6,
Spindle drive motor : 1.5/2.2 kW,
Number of axis : 2,
Chuck size : Collet mm,
Dimension (L x W x H) : 4.8 x 1.2 x 1.5 m,
Machine weight : 1.5 ton.
Control system: Fanuc 16 - T.
 
  356
IDMI6343
MakeCincinnati,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
X travels: 250 mm,
Z travels: 300 mm,
Spindle motor capacity:1.5 Kw,
Spindle RPM:45000,
Work head angle:+/-30 deg,
No of spindle:1,
Chuck dia:250 mm,
Max. dia: 400 mm,
Grinding bore dia: 20-200 mm,
Grinding depth:200-250 mm,
Coolant system,with tank
Dressor in auto or manual,
MPG for taking offet value,
Dressing auto componsation,
Operating console moveable,
Auto lubrication unit,
Full encloser guard,
Control:Siemens 802 SL with grinding cycles.
 
  357
IDMI6342
MakeGrajiano
Model
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc Power Mate CNC System
- X Axis Cross slide with 220mm Stroke moving
on Ball screw
- Z Axis Longitudinal Slide of approx 1200mm
Stroke with Ball Screw of Dia 32mm, Flat and V
guides for movement.
- Pragati Make 8 Station Tool Turret
- 250 dia Hydraulic RHOM Chuck for clamping
the Job
- Electrical Cabinet mounted on Machine
- Automatic Lubrication Unit Cenlub Make
- Hydraulic Tail Stock-DIPLOMAT make
- Manual Steady Rest
- Coolant tank with a Single Pump
600kg Loading Capacity
- Enclosed Guard
- - Painting of Machine in Dual Tone PU Paint
 
  358
IDMI6341
MakeDe Bernardi
ModelCNC1000
YOM
ConditionGood Condition
PhotoSee Photo
X = 250 , Z= 1000 mm
Spindle: 10 HP, 3500 RPM
Chuck: 250 MM
Swing: 400 MM
Turret : 12 station with Fanuc Servo motor
Tailstock ,
ABC = 1200 MM
Swing Over : 400 mm
Automatic lubrication unit,
Control: FANUC OTC
 
  359
IDMI6340
MakeDewoo Puma
ModelVL12
YOM
ConditionGood Condition
PhotoSee Photo
X = 350 , Z= 1200 mm
Turret : 12 station Heavy Duty
Tailstock , ABC = 1500 MM
Swing Over : 500 mm
Spindle chuck = 3500 mm, 3000 RPM
Spindle RPM = 2500
Spindle Power =11/15 kw
Automatic lubrication unit,
Coolant system,
Control:FANUC OTC
 
  360
IDMA28691
MakeMori Seiki
ModelSL35B5
YOM1990
ConditionGood Condition
PhotoSee Photo
Chuck size : 370 mm,
Number of axis : 2,
X axis travel : 238 mm,
Z axis travel : 780 mm,
Spindle speed : 25~2500 rpm,
Tool storage capacity : 10 pcs,
ATC : Yes,
Spindle drive motor : 18.5/22 kW,
Machine weight : 7 ton,
Dimension (LxWxH) : 3.7 x 1.9 x 2.4 m,
Control system : Fanuc 15TF.
 
  361
IDMI6316
MakeGeedieweiler
ModelChucker SLV250
YOM
ConditionGood Condition
PhotoSee Photo
CAPACITY
Swing over (Z axis cover) dia :380 mm
Swing over cross side dia: 120 mm,
Max turning dia: 100 mm,
Max bar capacity dia: 25 mm,

SPINDLE
Chuck size dia: 130 mm,
Spindle speed: 50-4000 rpm,
Spindle nose DIN 55026: A2-4,
Spindle through bore: 38 mm,
TRAVEL
X axis travel: 200 mm,
Z axis travel: 265 mm,
FEEDRATE
Rapid traverse X axis: 20 mts/min
Rapid traverse Z axis: 25 mts/min,
Feed rate: 6000 mm,
TOOLING
Tooling arrangement: Linear tooling,
Tool size: 20 X 20 mm,
Boring bar size: 25 dia mm,
MACHINE SIZE
Machine height :1540 mm,
Floor space: 1550 X 1550 mm,
Machine weight: 1300 kg
Control: Fanuc
 
  362
IDMI6315
MakeGeedieweiler
ModelChucker SLV250
YOM
ConditionGood Condition
PhotoSee Photo
CAPACITY
Swing over (Z axis cover) dia :380 mm
Swing over cross side dia: 120 mm,
Max turning dia: 100 mm,
Max bar capacity dia: 25 mm,

SPINDLE
Chuck size dia: 130 mm,
Spindle speed: 50-4000 rpm,
Spindle nose DIN 55026: A2-4,
Spindle through bore: 38 mm,
TRAVEL
X axis travel: 200 mm,
Z axis travel: 265 mm,
FEEDRATE
Rapid traverse X axis: 20 mts/min
Rapid traverse Z axis: 25 mts/min,
Feed rate: 6000 mm,
TOOLING
Tooling arrangement: Linear tooling,
Tool size: 20 X 20 mm,
Boring bar size: 25 dia mm,
MACHINE SIZE
Machine height :1540 mm,
Floor space: 1550 X 1550 mm,
Machine weight: 1300 kg
Control: Siemens
 
  363
IDMI6314
MakeHwacheon
ModelEco2SP-3
YOM
ConditionGood Condition
PhotoSee Photo
Machine Type: Double spindle Double Turret,
Chuck Dia: 10 inch,
Max.Swing: 460 mm,
Max.Turning Dia: 400 mm,
Max.Turning Length: 230 mm,
Spindle Nose: A2-8,
Bar Dia: 60 mm,
Spindle Through Hole: 77 mm,
Spindle RPM:3500 ,
X-Travel: 220 mm,
Z-Travel: 230 mm,
CNC Conrtol:Fanuc OMC
3 nos
 
  364
IDMI6311
MakeTraub
ModelTVC200P
YOM1995
ConditionGood working condition
PhotoSee Photo
Table longitudinal X axis: 375 mm,
Table cross travel X axis: 300 mm,
Head stock travel Z axis: 400 mm,
Table size:300 x 500,
"T" slot size: 3 x 12 x 100 mm,
Tool shank: BT 40,
Spindle speed: 60-6000,
Rapid traverse: 28/25,
Feedrate: 1260 mm/mit,
Tool change system: Twin arm,
Tool storage capacity: 16,
Rotating pallet changer table: Pallet 1 (table 1) - Pallet 2 (table 2),
With chip conveyor,
Control: Fanuc OM
 
  365
IDMI6309
MakeMysore Kirloskar,India
ModelTurbo200
YOM
ConditionGood Condition
PhotoSee Photo
CAPACITY
Swing Over Covers: 330 mm,
Turning Length :350 mm,
Max Turning Diameter: 200 mm,
Spindle Centre ht from Floor: 900 mm,

MAIN SPINDLE
Spindle nose :A2-5,
Bore Thru Spindle: 57 mm,
Bore Thru Draw tube:40 mm,
Chuck Size: 160 mm,
Taper in Centre Sleeve: MT 4,

SPINDLE DRIVE
A.C. Moter : 5.5/7.5 KW,
Speed Range: MAX 5000 rpm,
Constant Power Range: 1500-4500 rpm,

SLIDES
Z Axis Stroke: 350 mm,
X Axis Stroke: 115 mm,

FEED
Z Axis: 0-5000 mm/min,
X Axis: 0-5000 mm/min,

RAPID
Z Axis : 20 m/min,
X Axis: 20 m/min,
Programmable resoluation: 0.001 mm,


TAILSTOCK
Quil Diameter: 60 mm,
Quil Stroke: 150 mm,
Taper in Spindle: MT 4,

TURRET
No Of Stations: 8,
Max Boring Bar Diameter: 32 mm,
Tool Cross Section: 20 X 20 mm,
Carriage inclination: 60 deg,

Coolant Capacity
Motor Power: 0.25 kw,
Flow Capacity at 1m Head: 8 lit/min,

POWER SUPPLY: 415 V, 3P h, 50 Hz,
Total Power Consumpation: 15 KVA,
Control: Fanuc OTD
 
  366
IDMA28444
MakeGiana
ModelGF920CNC
YOM1998
ConditionGood Condition
PhotoSee Photo
Swing over bed guideways : 1050 mm,
Swing over cross slide : 920 mm,
Distance between centres : 1500 mm,
Spindle nose : ISO702/I 15" A1,
Spindle bore : 155 mm,
Variation of r.p.m. in different ranges : χ1000(10χ1600) rpm,
Turning tools : N° 1χ12,
Spindle motor power : 40χ60 Kw,
Max workpiece weight between centres : 3000 Kg,
Weight of the machine : 21440 kg.
CNC Siemenc 840 d.
 
  367
IDMI6264
MakeTecno Wasino
ModelJAPAN
YOM2005
ConditionGood Condition
PhotoSee Photo
Chuck dia : 165 mm,
Without tail stock,
Accuracy : for digit machine (0.0001 mm),
Control : Fanuc 21.
 
  368
IDMA28213
MakeChevalier,Taiwan
ModelFCL-2580-G
YOM2009
ConditionGood Condition
PhotoSee Photo
Max swing over bed : 660 mm,
Max swing over saddle : 400 mm,
Center distance : 2000 mm,
rpm : 2250
spindle bore : 85 mm,
8-fold turret,
steady,
3-jaw chuckr : 400 mm,
toolholders,
control : Siemens 840 D.
 
  369
IDMA28076
MakeVDF Boehringer
Model180 C
YOM1992
ConditionGood Condition
PhotoSee Photo
Swing over bed : 330 mm,
Distance between centers : 1000 m,m
Spindle speed range : 50 - 4500 r / min,
Revolver : 12 - fold,
Weight of the machine ca .: 8, 5 to,
Control : CNC Siemens 810T,
Equipment / Accessories:
Tailstock;
Chip conveyor;
12-station turret;
Coolant system.
 
  370
IDMA28073
MakeHwacheon
ModelHi-Tech-400
YOM2011
ConditionGood Condition
PhotoSee Photo
X - axis displacement of 280 mm,
Z - axis : 820 mm,
distance between centers : 1000 mm,
turning diam. 340 mm above the bed,
spindle bore : 80 mm,
spindle speed : 2500 rpm,
rapid traverse X - axis 20 m / min,
z- axis 20 m / min,
v.v. 12 -fold tool holder,
SMW 3-jaw chuck diam. 300 mm ,
foot control ,
Controller : Fanuc,
type 0i- TD,
machine weight : 8050 kg,
Only 996 Hours Worked.
 
  371
IDMA28072
MakeHeyligenstaedt
ModelHeynumat24L-2/2000
YOM1987/1997 retrofitted
ConditionGood Condition
PhotoSee Photo
Centre height : 450 mm,
Distance between centre : 2000 mm,
Swing over bed : 900 mm,
Swing over slide : 800 mm,
Spindle bore : 105 mm,
Bed slide : 2 pcs. ,
Tool changer : 2 pcs./12 tools VDI60,
Spindle speed : 9-2240 rpm (2 levels),
Motor power : 79,5 kW,
Weight: appr. 17,
Controller : SIEMENS SINUMERIK 840C(1997).
 
  372
IDMA28063
MakeJator
ModelTAJ85
YOM1995
ConditionGood Condition
PhotoSee Photo
Turning diameter over bed: 600 mm,
Swing over carriage: 360 mm,
Turning length max: 1000 mm,
Bar passage: 85 mm,
Spindle nose: DIN 55026 A8,
Spindle speed: 0-2500 rpm,
Spindle power : 22/26 kw,
Chuck aut.idraulico: 315 mm,
12-position automatic turret type,
Axes X/Y: 285-100 mm,
Quick axes X/Z : min 20,000 mm,
Spindle taper C.M.4
Manual machine,
Control: CNC Fanuc 0-T
 
  373
IDMA28043
MakeMazak,Japan
ModelIntegrex35Y
YOMNew 1998
ConditionGood Condition
PhotoSee Photo
Turning length : 1000 mm,
Max swing : 575 mm,
Swing over slide : 470 mm,
Spindle bore : 88 mm,
Spindle speeds : 35-3000 rpm,
Z, X, C, Y-axis,
MAZATROL T Plus control, hydr,
Steady, tooling.
 
  374
IDMI6169
MakeDaewoo Puma
Model280
YOM
ConditionGood Condition
PhotoSee Photo
Max Turning diameter : 420 mm,
Max turning length : 658 mm,
Bar working diameter : 76 mm,
Main spindle speed : 3500 r/min,
Travel distance X axis : 242 mm,
Travel distance Z axis : 680 mm,
Carriage rapid traverse X axis : 20 m/min,
Carriage rapid traverse Z axis : 24 m/min,
Turret OD tool size : 25 x 25 mm,
Boring bar diameter : 50 mm.
 
  375
IDMA27538
MakeWFL Voest Alpine
ModelM70
YOM1997
ConditionGood Condition
PhotoSee Photo
Turning diameter : 670 mm,
Turning length : 2000 mm,
Greates pass round over bed : 750 mm,
Working height : 1233 mm,
Axis stroke :-
X-axis : 620 mm,
Z-axis : 2655 mm,
E-axis : 660 mm,
Turning-Spindle :-
Turning speed range : spindle 5 - 1.600 U/min,
No. of turning speeds 2,
Transmission ratio : 1 5 - 400 U/min,
Transmission ratio : 2 20 - 1.600 U/min,
Power capacity : 63 kW,
Max. Torque : 4724 Nm,
Spindle head : 15 / A DIN 55026,
Spindle diameter in front bearing : 240 mm,
Spindle bore : 165 mm,
C-Axis 0,001°,
Max. rpm C : 18 min/-1,
Max Torque C : 2.180 Nm,
Milling-Unit :-
Turning speed range : 0 - 3.000 U/min,
Power capacity : 15 kW,
Max. Torque : 200 Nm,
Tool taper : SK 40,
B - Axis 180 (+/- 90)°,
Max. Torque B: 1.000 Nm,
Y-axis 300 (+175 / -125) mm,
Rapid traverse Y-axis : 10 m/min,
Feed force Y : 14 kN,
Ball screw, Ψ x flank lead 40 x 5 mm,
Internal coolant system feed,
Double Cross Slide :-
Feed force max. : 31,5 kN,
Ball screw, Ψ x flank lead : 63 x 10 / 50 x 10 mm,
Rapid traverse : 10 m/min,
Tool magazin :-
Number of tool positions : 24 pos.
Max. tool diameter : 85 mm,
Max. tool-dia with free toolbox : 125 mm,
Max. workpiece length : 700 mm,
Max. tool weight : 8 kg.
Max. tilting speed : 120 °/sec,
Turret :-
Number of tool positions : 12 pos.
Shank diameter : 32 mm,
Tail stock,
Diameter of quill : 140 mm,
Quill stroke : 160 mm,
Taper of center : MK 5,
Pressure center sleeve : 4.000 - 23.000 N,
Total power requirement : 102 kVA,
Dimensions of the machine ca. : 9,0 x 5,0 x 3,5 m,
Weight of the machine : 22,0 t.
Documents,
Div. tooling,
Chip conveyor,
Coolantsystem,
High pressure coolant 40 bar,
Through spindle coolant,
Oil mist extraction,
Paper band filter,
B-axis,
Renishaw.
Control Sinumerik 840 C-T Siemens.
 
  376
IDMA27537
MakeHeid
ModelS800/2000
YOM1991
ConditionGood Condition
PhotoSee Photo
Greates pass round over bed : 1000 mm,
Turning length : 2000 mm,
Swing diameter over slide rest : 800 mm,
Travel -x axis : 820 mm,
Travel -z axis : 2100 mm,
Spindle bearing diameter : 267 mm,
Spindle bore : 105 mm,
Diameter of spindle flange : DIN 55026 Gr. 15,
Max. torque on the spindle : 12000 Nm,
Transmission ratio : 4,
Transmission ratio : 1 4,5 ~ 100 U/min,
Transmission ratio : 2 9 ~ 220 U/min,
Transmission ratio : 3 18 ~ 440 U/min,
Transmission ratio : 4 36 ~ 900 U/min,
Turning speed range - spindle : 4,5 ~ 900 U/min,
Rapid traverse : 10 m/min,
Longitudinal feeds : 20 kN,
C - Axis 0,001 °,
Max. rpm 16 U/min,
Torque 1950 Nm/100%,
Work piece power 12 kW / 60% kW,
Transmission ratio 1 137 Nm / 60%,
Turning speed range - milling : 17 ~ 666 U/min,
Transmission ratio 2 46 Nm / 60%,
Turning speed range - milling : 50 ~ 2.000 U/min,
Tail stock,
Diameter of quill : 200 mm,
Quill stroke : 200 mm,
Taper MK 6,
Quill power : 50 kN,
Coolant,
Tank capacity 1500 l,
Coolant capacity : 40 l/min,
Feed pressure : ca. 4 bar,
Coolant capacity : 80 l/min,
Feed pressure : 16 bar,
Tool piece magazine with : 15 pos.
Tool adaptor HEID MF 60 ABS63/40,
Total power requirement 170 kVA,
Dimensions of the machine : 8,0 x 9,0 x 9,0 m,
Weight of the machine : 29 t.
Tailstock,
Chip conveyor,
Coolantsystem,
High pressure coolant,
Driven tools,
Div. tool holder,
C-axis,
Face plate,
Control SINUMERIK 850 T Siemens.
 
  377
IDMI6150
MakeTakamaz
ModelXW80
YOM
ConditionGood Condition
PhotoSee Photo
Max turning diameter : 170 mm,
Max turning length : 125 mm,
Chuck size : 150 mm,
No of chuck : 2 collet,
Max swing over bed : 220 mm,
Spindle speed : 4500 min-1,
Spindle motor : AC5.5/3.7 (7.5/5.5) kW,
Type 8 station turret,
Feed motor : X : AC1.0, Z : AC1.6,
Size W x L x H : 1720 x 1825 x 1975 mm,
Total power capacity : 31 kva,
Capacity appropriate workpiece : 60 x 60 mm,
Capacity max loading weight : 1.0 kg,
Loader axial stroke : X 200, Y 470 and Z depends on the specifications,
Rapid traverse rate : X 45, Y 75 and Z 110 m/min,
Hand rotation angle : 90 deg,
Hand finger stroke : 10 mm,
Machine Weight : 4500 kg.
Twin spindle,
With auto loader.
Control : Fanuc control 32i - model A CNC control.
QTY : 2 MACHINES
 
  378
IDMI6115
MakeTakang,Taiwan
ModelTNC200
YOM
ConditionGood Condition
PhotoSee Photo
Turning length : 500 mm,
Turning diameter : 580 (280) mm,
Tool changer positions : 12+8,
Number of controlled axles : 2,
Spindle bore : 52 mm,
Turning speed range : 4000 rpm,
Dimensions approx. : 3800 x 2200 x 2500 mm,
Control : Fanuc OTT-C.
 
  379
IDMA27247
MakeNakamura
ModelTW20
YOM1992/New in 1996
ConditionGood Condition
PhotoSee Photo
Turning diameter : 215 mm,
Turning length : 195 mm,
Spindle distance : 940 mm,
bar material dia : 51 mm,
Turning speeds : 50-5000 U/min,
Spindle passage : 65 mm,
X axis : 195 mm,
Turret : 12 -fach,
Weight of the machine ca : 7 ton,
Dimensions of the machine ca : 3,2 x 3,3 x 1,9 m,
Handling : ABB,
Control : Fanuc 0
 
  380
IDMA27240
MakeTornos
ModelA1000
YOMRetrofited around 2000 and never used after
ConditionGood Condition
PhotoSee Photo
Swing over bed ways : 807.5 mm,
Swing over carriage : 590 mm,
Distance between centers : 1977.5 mm,
Spindle bore : 103.25 mm,
Width of bed ways : 637.5 mm,
Cross of bed ways : 600 mm,
Tail stock quill diameter : 132.5 mm,
Tail stock quill travel : 197.5 mm,
Spindle motor : 40 HP,
Spindle speed (2 ranges) : 5 to 800 rpm,
Equipped with:
Fanuc 16 T CNC control,
Steady rest,
625-3 Jaw chuck,
625 face plate,
Front 6 position CNC turret,
Tails stock,
Manual tail stock,
Z axis Heidenhain linear scale.
 
  381
IDMI6111
MakeTakisawa,Japan
ModelTC4
YOM1999
ConditionGood Condition
PhotoSee Photo
Chuck dia : 400 mm,
Between Center : 2000 mm,
Fanuc OT CNC Control,
With A/C Drives.
 
  382
IDMA27195
MakeGeminis
ModelCNC-4-PLUS-720x3000
YOM1999
ConditionGood Condition
PhotoSee Photo
Max swing over bed : 709 mm,
Max swing over cross slide : 462 mm,
Distance between centers : 2952 mm,
Spindle bore : 127 mm,
Spindle speeds : 300 to 1200 RPM,
Spindle motor : 23 HP,
Tailstock quill diameter : 99 mm,
Quill travel : 216 mm,
Quill taper : 6 morse,
Bed width : 424 mm,
Max weight of part : 5,643 LBS,
Approximate machine dimensions LR x FB x H : 5300 x 1950 x 1775 mm,
Approximate machine weight : 12,600 LBS.
Control : FAGOR 8050T CNC control.
500 mm 4 Jaw Chuck,
RS232 port,
Sauter 4 position programmable tool post with holders,
Tailstock,
Chip conveyor,
3 point roller steady rest 200 mm capacity,
Coolant pump,
Electronic handwheels X, Z.
 
  383
IDMA27194
MakeChevalier,Taiwan
ModelFCL40160F
YOM2000
ConditionGood Condition
PhotoSee Photo
Turning diameter : 1015 mm,
Turning length : 4000 mm,
Turning dia over face slide : 670 mm,
Spindle turning speed range : 0-1000 U/min,
Transmission ratio : 3,
Spindle bore : 160 mm,
Z axis : 4060 mm,
X axis : 570 mm,
Rapid traverse longitudinal : 10000 mm/min,
Rapid traverse cross : 10000 mm/min,
Spindle drive motor : AC30 kW,
Chuck : 400 mm,
Tool taper : 4 fach,
Dimensions of the machine : 8 x 2,3 x 2,2 m,
Weight of the machine : 7,5 t.
Tailstock,
TFT Screen Manual turn,
Z + X axis with AC drive,
Tool holder 4 x hydraulic NC control,
Control : SIEMENS 810D.
 
  384
IDMI6106
MakeHeyligenstaedt
ModelHeynumat10U
YOM
ConditionGood Condition
PhotoSee Photo
Turning diameter : 480 mm,
Turning length : 3400 mm,
Swing diameter over slide rest : 330 mm,
Chuck size : 400 mm,
Turret head : 12,
Spindle bore : 101 mm.
with NEW CNC Controller Siemense 828 D.
Hydraulic self centering steady rest for capacity : 40/150 mm,
By replacing only clamping jaws,
The capacity of steady rest can be increased,
Self centering Hydraulic chuck Dia. : 400 mm,
Motorized tail stock.
 
  385
IDMA27184
MakeMori Seiki
ModelSL200MC
YOM1997
ConditionGood Condition
PhotoSee Photo
Control : MSD 518II (Fanuc),
10" Hollow chuck,
With tailstock,
With milling.
 
  386
IDMA27183
MakeMori Seiki
ModelSL15MC
YOM1995
ConditionGood Condition
PhotoSee Photo
CNC Control : MSC516,
Center Distance : 595 mm,
Swing dia : 450 mm,
 
  387
IDMA27182
MakeMori Seiki
ModelSL154MC
YOM2003
ConditionGood Condition
PhotoSee Photo
Control :MSG-805,
6 inch 3 jaw hollow chuck,
C axis,
Milling ,
Tailstock,
V12 turret,
Max. work dia : 430 mm,
max. work length : 519 mm
 
  388
IDMA26785
MakeVoest Alpine
ModelWNC 500S x 1000
YOM1989
ConditionGood Condition
PhotoSee Photo
Turning dia over bed : 540 mm,
Swing dia over slide : 450 mm,
Turning length : 1000 mm,
Max workpiece weight : 1250 kg,
Spindle bore : 77 mm,
Spindle bearing : 120 mm,
Spindle speed : 25-1000 / 100-4000 u/min,
Main drive motor : 35 kW,
Chuck dia : 315 mm,
Machine Weight : 9000 kgs,
Driven tool turret : 3.5 kW,
C axis indexing,
Control : CNC Siemens 850.
 
  389
IDMA26688
MakeDaewoo
ModelPUMA240mb
YOM2007
ConditionGood Condition
PhotoSee Photo
Swing over bed : 530 mm,
Max. Turning diameter : 300 mm,
Distance between centre : 513 mm,
Turret motorized : 12 stations,
Rotating tools : 5000 rpm,
C axis with brake,
Hydraulic chuck diameter : 210 mm,
Bar capacity dia : 65 mm,
Spindle speed 4500 rpm,
Spindle power : 15 kw,
Quill diameter : 75 mm,
Quill travel : 80 mm,
Chip conveyor,
Interface for LNS feedbar,
CNC Fanuc D-iT.
 
  390
IDMA26682
MakeDoosan
ModelPuma-TL2500M
YOM2007
ConditionGood Condition
PhotoSee Photo
Turning diameter : 360 mm,
Turning length : 600 mm,
Greates pass round over bed : 600 mm,
Chucking diameter : 254 mm,
Spindle passage : 76 mm,
Turning speeds : 3500 min,
Turning speed range milling : 5000 min,
Power capacity : 26 kW,
Total power requirement,
Dimensions of the machine : 4,5 x 3 x 2 m,
Weight of the machine : 7 ton.
12-fold turret upper, all for driven tools,
8-fold turret down, all for driven tools,
Feeding time : 2.173 h,
With jaw chuck,
Tool measuring,
Ca. 4-5 norm drilling bar and turning holders,
Tailstock,
Swarf conveyor.
Control : FANUC 18i-TB.
 
  391
IDMI5996
MakeYam,Taiwan
ModelCK2A
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size : 200 mm,
Max. turning dia : 270 mm,
Between center : 450 mm,
Fanuc O-T CNC Control.
 
  392
IDMI5995
MakeYam,Taiwan
ModelCK1
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Size : 165 mm,
Max. Swing dia : 200 mm,
Between Center : 400 mm,
Fanuc O-T CNC Control.
 
  393
IDMA26578
MakeYang
ModelCK1
YOM
ConditionGood Condition
PhotoSee Photo
Swing Over Bed : 460 mm,
Max. Machining Dia : 150 mm,
Slant Bed : 45°,
Max. Distance Between Centres : 430 mm,
Distance between 6” Chuck and Turret : 272 mm,
Max. Longitudinal Travel : 290 mm,
Max. Cross Travel : 110 mm,
Max. Bar Capacity : 41 mm,
Spindle Speeds : 45-6,000 rpm,
Main Spindle Motor : Fanuc A.C. 5.5/7kW (cont/30 min.),
Tail stock Quill Travel : 150 mm,
Quill Dia. & Taper : 52 mm 3MT,
12 Station Turret,
Cheap Convoyer,
Control : CNC FANUC OT.
 
  394
IDMA26577
MakeYang
ModelCK3A
YOM
ConditionGood Condition
PhotoSee Photo
Swing over bed : 650 mm,
Turnable diameter on carriage : 400 mm,
Turnable length : 620 mm,
Connection : ASA A-2-8,
Spindle diameter : 250 mm,
Spindle bore : 64 mm,
Motor power : 15 Kw,
Spindle speed : 30 - 3000 rpm,
Turret,
Tailstock,
Tailstock stroke : 640 mm,
Dinghy tailstock : stroke 150 mm,
Dinghy connection : c.m. 4",
X stroke carriage : 255 mm,
Z stroke longitudinal : 620 mm,
Axis swifts : 12 m/min,
Chip conveyor,
Anti accidental protection,
Weight : 6800 Kg.
CNC : FANUC.
 
  395
IDMA26392
MakeDaewoo Puma
ModelPuma8UHS
YOM1995
ConditionGood Condition
PhotoSee Photo
Chuck dia : 210 mm,
Max. diameter : 330 mm,
length : 400 mm,
Turret : 12 tools,
Control : Fanuc OT.
 
  396
IDMA26376
MakeDaewoo
ModelLYNX210
YOM2002
ConditionGood Condition
PhotoSee Photo
Max turning diameter : 280 mm,
Turning diameter over bed : 460 mm,
Turning length : 300 mm,
Spindle hole diameter : 45 mm,
Axis X travel : 160 mm,
Axis Z travel : 330 mm,
Revolver head : 12 pcs,
Spindle : 60-6000 rpm,
Motor power : 7,5 kW,
Overall power demand : 25 kVA,
Robot, feeding table,
Machine weight : 3200 kg.
Control : CNC Fanuc 21i-T.
 
  397
IDMA26373
MakeTakisawa,Japan
ModelUnused
YOM1992
ConditionVery good condition
PhotoSee Photo
Chuck diameter : 250 mm,
Between centre : 600 mm,
Control : Fanuc OT.
 
  398
IDMA26319
MakeDoosan
ModelPuma2100SY
YOMNew in 2010
ConditionGood Condition
PhotoSee Photo
Swing over bed : 779.78 mm,
Swing over carriage : 629.92 mm,
Distance between spindles : 849.88 mm,
Max. turning diameter : 406.4 mm,
Max. turning length : 520.07 mm,
Bar working diameter : 66.04 mm,
Main spindle speed : 4500 RPM,
Sub spindle speed : 4500 RPM,
X axis travel : 259.08 mm,
Z axis travel : 589.28 mm,
Y axis travel : 104.14 mm,
B axis travel : 589.28 mm,
C axis : 0.001 deg,
Rapid traverse X & Z &B/Y :1181 IPM / Y : 393 IPM,
No. of tool stations : 12,
Equipped with :
Fanuc series 31i-Model A,
Parts catcher,
Chip conveyor,
(3) live holders,
Tool pre setter,
Tri color st. lights,
203.2 mm main chuck/ 152.4 mm sub spindle chuck.
 
  399
IDMA25543
MakeHwacheon
ModelHi-Tech700
YOM2008
ConditionGood Condition
PhotoSee Photo
Turning Diameter : 700 mm,
Turning length : 2000 mm,
Turning speed : 1800 min,
Rapid traverse : 24 m/min,
Power capacity : 30/37 kW,
Max torque on the spindle : 3000 Nm,
Spindle bore : 132 mm,
Number of tools : 12 St,
Tail stock : 1,
Chip conveyor : 1,
Tool taper : VDI 40.
Control : FANUC Series 18i-TB.
 
  400
IDMI5821
MakeDianichi
ModelB70
YOM2005 Onwards
ConditionGood Condition
PhotoSee Photo
Max. working dia : 500/600 mm,
Max. turing length : 2000 mm,
Swing : 700 mm,
Between centres : 2000 mm,
Control : Fanuc 6T
 
  401
IDMI5820
MakeWMW Niles ,Germany
ModelDFS 2/2
YOM
ConditionGood Condition
PhotoSee Photo
Admit between : 2500 mm,
Turning diameter : 500 mm,
Turret : 12 station,
Control : Siemens
 
  402
IDMI5810
MakeGildemeister /Max Muller
ModelMDW30
YOM
ConditionGood Condition
PhotoSee Photo
Max swing over bed- 960 mm, Max turned diameter- 640 mm, Max turned length- 1200 mm, Spindle speeds 5-100rpm, feeds 1-300 mm/min, rapids 10m/min, complete with 630mm 3 jaw chucks, 12 position tool changer, coolant, swarf conveyor, manuals, Approximate dimensions 5500 x 2000 x 2400 mm,Approximate weight : 11,000 kg,Control : Num 1060,
 
  403
IDMI5809
MakeHwacheon
ModelHi-Eco31
YOM
ConditionGood working condition
PhotoSee Photo
Swing over bed- 540 mm,
Max turning diameter- 340 mm,
Maximum distance between centres- 1000 mm,
Spindle speeds- 30-3000rpm,
Feed rates-0,001-500mm/min,
Rapids X 15m/min, Z 18m/min,
With 250 mm 3 jaw hydraulic chuck,
With Tool probe,
With 12 station turret,
With Swarf conveyor,
With Manuals,
Approximate dimensions- 4300x2000x2100 mm,
Approximate weight- 8500kg,
FANUC OT CNC Control
 
  404
IDMA25247
MakeJohnford,Taiwan
ModelTC50
YOM2000
ConditionGood Condition
PhotoSee Photo
Chuck diameter : 315 mm,
Swing over bed : 528 mm,
Swing over cross slide : 400 mm,
Bar capacity : 77 mm,
Travels X : 290 mm,
Travel Z : 1.040 mm,
Spindle : 3000 RPM, 18 Kw,
CNC Fanuc 18T-C (2 axes),
Turret of 12 tools,
Chip conveyor.
 
  405
IDMA25246
MakeJohnford,Taiwan
ModelSL35
YOM2004
ConditionGood Condition
PhotoSee Photo
Chuck diameter : 200 mm,
Swing over bed : 400 mm,
Swing over cross slide : 350 mm,
Bar capacity : 51 mm,
Travels X : 190 mm,
Travels Z : 400 mm,
Spindle : 4500 RPM / 15 kW,
CNC Fanuc Oi TB (2 axes) Turret of 12 tools,
Chip conveyor.
 
  406
IDMA25245
MakeOkuma,Japan
ModelLT10M-S2
YOM1996 / 2002
ConditionGood Condition
PhotoSee Photo
Swing over saddle : 400 mm,
Max diameter : 210 mm,
Max length : 130 mm,
Bar capacity : 42 mm,
Spindle speeds : 6000 RPM,
Feeds : 15-20 mts/min,
CNC control : OSP 7000 L-7 Controlled axis,
two turrets - 12 + 12 driven tools,
With LNS Hydrobar servo II barfeeder, Chip conveyor.
 
  407
IDMI5797
MakeHeinemann,Austria
ModelP200
YOM
ConditionGood Condition
PhotoSee Photo
Chuck dia : 250 mm,
Max swing dia : 450 mm,
Turning lenght : 1000 mm,
Complete with enclosures,
Manuals, booklets intact,
Control : Siemens 840 C.
 
  408
IDMA24877
MakeWasino,Japan
ModelLJ6
YOM1995
ConditionGood condition,under power
PhotoSee Photo
Bed over swing : 410 mm,
Cross over swing : 250 mm hyd chuck,
Standard cutting dia : 220 mm,
Spindle speed : l=10~1060rpm/min,h=35~3500rpm/min,
Spindle bore : 75 mm,
Turrett type : v12,
Tail stock dia : 80 mm,
Spindle travers : 100 mm,
Maim motor : ac18.5/22kw,
Total electrinic power : 37kva,
Dimention : 3300*2000(l*w),
Achine weghit : 470 kg.
Control : fanuc-0t-c.
 
  409
IDMA24377
MakeMonfort,Germany
ModelUnicen1002
YOM
ConditionBrand New
PhotoSee Photo
The moulder high performance CNC-turn mill centers,
Turning length : 1500 mm,
Swing diameter over bed :1000 mm,
Swing diameter over cross slide : 800 mm,
Turning diameter : 800 mm,
Spindle nose DIN 55026 : All(A15)*,
Internal drew tube diameter : 86 (126)* mm,
Speed range with siemens : 6-4000(4-2000)* (min-1),
Control : Siemens sinumerik 840D solutionline.
 
  410
IDMA24376
MakeMonfort,Germany
ModelUnicen702
YOM
ConditionBrand New
PhotoSee Photo
The moulder high performance CNC-turn mill centers, Turning length : 1000/1500 mm, Swing diameter over bed : 600 mm, Swing diameter over cross slide : 400 mm, Turning diameter : 500 mm, Spindle nose DIN 55026 : A8 All, Internal drew tube diameter : 93(126)* mm, Drive power (100%40%DR) with siemens : 28/34,5 kw Speed range with siemens : 31-4000(31-2000)*(min-1), Control : Siemens sinumerik 840D solutionline.
 
  411
IDMA24375
MakeMonfort,Germany
ModelUnicen702
YOM
ConditionBrand New
PhotoSee Photo
The moulder high performance CNC-turn mill centers,
Turning length : 1000/1500 mm,
Swing diameter over bed : 600 mm,
Swing diameter over cross slide : 400 mm,
Turning diameter : 500 mm,
Spindle nose DIN 55026 : A8 All,
Internal drew tube diameter : 93(126)* mm,
Drive power (100%40%DR) with siemens : 28/34,5 kw
Speed range with siemens : 31-4000(31-2000)*(min-1),
Control : Siemens sinumerik 840D solutionline.
 
  412
IDMA24374
MakeMonfort,Germany
ModelUnicen502
YOM
ConditionBrand New
PhotoSee Photo
The moulder high performance CNC-turn mill centers, Turning length : 900 mm, Swing diameter over bed : 600 mm, Swing diameter over cross slide : 490 mm, Turning diameter : 490 mm, Spindle nose DIN 55026 : A8, Internal drew tube diameter : 86 mm, Drive power (100%40%DR),synchr.built-in spindle with siemens : 23,6/33 kw, Drive power (100%40%DR) , synchr.built-in spindle with fanuc : 23,6/33 kw, Speed range with siemens : 25-4000 (min-1), Speed range with fanuc : 25-4000 (min-1), Control : Fanuc 31i .
 
  413
IDMA24366
MakeMonfort,Germany
ModelUnicen502
YOM
ConditionBrand New
PhotoSee Photo
The moulder high performance CNC-turn mill centers,
Turning length : 900 mm,
Swing diameter over bed : 600 mm,
Swing diameter over cross slide : 490 mm,
Turning diameter : 490 mm,
Spindle nose DIN 55026 : A8,
Internal drew tube diameter : 86 mm,
Drive power (100%40%DR),synchr.built-in spindle with siemens : 23,6/33 kw,
Drive power (100%40%DR) , synchr.built-in spindle with fanuc : 23,6/33 kw,
Speed range with siemens : 25-4000 (min-1),
Speed range with fanuc : 25-4000 (min-1),
Control : Siemens sinumerik 840D solutionline.
 
  414
IDMA24365
MakeMonfort,Germany
ModelMNC1002
YOM
ConditionBrand New
PhotoSee Photo
The modular high -performance CNC-turning lathes, Turning length : 1400 mm, Swing diameter over bed :1000 mm, Swing diameter over cross slide : 800 mm, Spindle nose DIN 55026: All (A15)*, Internal draw tube diameter : 86(126)*mm, Drive power (100%40%DR) with fanuc : 30/37 kw, Drive power (100%60%DR) with siemens : 40/50** kw, Speed range with fanuc :6-4000(4-2000)* (min-1), Speed range with siemens : 6-4000(4-2000)* (min-1), Max. drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 13,6 kw, Max. speed with fanuc :3200 (min-1), Max. speed with siemens :2500 (min-1), Control : Fanuc 31i.
 
  415
IDMA24364
MakeMonfort,Germany
ModelMNC1002
YOM
ConditionBrand New
PhotoSee Photo
The modular high -performance CNC-turning lathes, Turning length : 1400 mm, Swing diameter over bed :1000 mm, Swing diameter over cross slide : 800 mm, Spindle nose DIN 55026: All (A15)*, Internal draw tube diameter : 86(126)*mm, Drive power (100%40%DR) with fanuc : 30/37 kw, Drive power (100%60%DR) with siemens : 40/50** kw, Speed range with fanuc :6-4000(4-2000)* (min-1), Speed range with siemens : 6-4000(4-2000)* (min-1), Max. drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 13,6 kw, Max. speed with fanuc :3200 (min-1), Max. speed with siemens :2500 (min-1), Control : Siemens sinumerik 840D solutionline.
 
  416
IDMA24363
MakeMonfort,Germany
ModelMNC702
YOM
ConditionBrand New
PhotoSee Photo
The modular high -performance CNC-turning lathes, Turning length : 1000/1500 mm, Swing diameter over bed : 600 mm, Swing diameter over cross slide : 400 mm, Spindle nose DIN 55026: A* (All)*, Internal draw tube diameter : 93(126)*mm, Drive power (100%40%DR) with fanuc : 30/37 kw, Drive power (100%60%DR) with siemens : 28/34,5 kw, Speed range with fanuc :44-4000(33-2000)* (min-1), Speed range with siemens : 31-4000(31-2000)* (min-1), Max. drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Control : Fanuc 31i.
 
  417
IDMA24362
MakeMonfort,Germany
ModelMNC702
YOM
ConditionBrand New
PhotoSee Photo
The modular high -performance CNC-turning lathes, Turning length : 1000/1500 mm, Swing diameter over bed : 600 mm, Swing diameter over cross slide : 400 mm, Spindle nose DIN 55026: A* (All)*, Internal draw tube diameter : 93(126)*mm, Drive power (100%40%DR) with fanuc : 30/37 kw, Drive power (100%60%DR) with siemens : 28/34,5 kw, Speed range with fanuc :44-4000(33-2000)* (min-1), Speed range with siemens : 31-4000(31-2000)* (min-1), Max. drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Control : Fanuc 31i.
 
  418
IDMA24361
MakeMonfort,Germany
ModelMNC702
YOM
ConditionBrand New
PhotoSee Photo
The modular high -performance CNC-turning lathes, Turning length : 1000/1500 mm, Swing diameter over bed : 600 mm, Swing diameter over cross slide : 400 mm, Spindle nose DIN 55026: A* (All)*, Internal draw tube diameter : 93(126)*mm, Drive power (100%40%DR) with fanuc : 30/37 kw, Drive power (100%60%DR) with siemens : 28/34,5 kw, Speed range with fanuc :44-4000(33-2000)* (min-1), Speed range with siemens : 31-4000(31-2000)* (min-1), Max. drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Control : Siemens sinumerik 840D solutionline.
 
  419
IDMA24360
MakeMonfort,Germany
ModelMNC702
YOM
ConditionBrand New
PhotoSee Photo
The modular high -performance CNC-turning lathes,
Turning length : 1000/1500 mm,
Swing diameter over bed : 600 mm,
Swing diameter over cross slide : 400 mm,
Spindle nose DIN 55026: A* (All)*,
Internal draw tube diameter : 93(126)*mm,
Drive power (100%40%DR) with fanuc : 30/37 kw,
Drive power (100%60%DR) with siemens : 28/34,5 kw,
Speed range with fanuc :44-4000(33-2000)* (min-1),
Speed range with siemens : 31-4000(31-2000)* (min-1),
Max. drive power (25%DR) with fanuc : 13,7 kw,
Max. drive power (25%DR) with siemens : 12,6 kw,
Max. speed with fanuc : 4000 (min-1),
Max. speed with siemens : 4000 (min-1),
Control : Siemens sinumerik 840D solutionline.
 
  420
IDMA24359
MakeMonfort,Germany
ModelDNC500
YOM
ConditionBrand New
PhotoSee Photo
The twin spindle CNC turning lathes,
Traverse X axes : 260/260 mm,
Traverse Z axes : 600/600 mm,
Swing diameter over bed : 560 mm,
Spindle nose DIN 55026 : A8/A8,
Internal drew tube diameter : 86/86 mm,
Drive power (100%40%DR) with fanuc : 18,5/22kw,
Drive power (100%40% DR ) with siemens : 23,7/33,6 kw,
Speed range with fanuc : 33-4000 (min-1),
Speed range with siemens : 31-4000 (min-1),
Control : Fanuc31i.
 
  421
IDMA24358
MakeMonfort,Germany
ModelDNC500
YOM
ConditionBrand New
PhotoSee Photo
The twin spindle CNC turning lathes,
Traverse X axes : 260/260 mm,
Traverse Z axes : 600/600 mm,
Swing diameter over bed : 560 mm,
Spindle nose DIN 55026 : A8/A8,
Internal drew tube diameter : 86/86 mm,
Drive power (100%40%DR) with fanuc : 18,5/22kw,
Drive power (100%40% DR ) with siemens : 23,7/33,6 kw,
Speed range with fanuc : 33-4000 (min-1),
Speed range with siemens : 31-4000 (min-1),
Control : Siemens Sinmerik 840D Solutionline.
 
  422
IDMA24351
MakeMonfort,Germany
ModelRNC700
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000/1500 mm, Swing diameter over bed : 720 mm, Swing diameter over cross slide : 550 mm, Spindle nose DIN 55026 : All, Internal drew tube diameter :86 mm, Drive power (100%40%DR) with fanuc : 38/37*** kw, Drive power (100%60%DR) with siemens : 37/46*** kw, Speed range with fanuc :8-4000 (min-1), Speed range with siemens : 6-4000 (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 3200 (min-1), Max. speed with siemens :3200 (min-1), Control : Fanuc31i.
 
  423
IDMA24350
MakeMonfort,Germany
ModelRNC700
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000/1500 mm, Swing diameter over bed : 720 mm, Swing diameter over cross slide : 550 mm, Spindle nose DIN 55026 : All, Internal drew tube diameter : 86, Drive power (100%40%DR) with fanuc : 30/37*** kw, Drive power (100%60%DR):37/46***, Speed range with fanuc : 8-4000 (min-1), Speed range with siemens : 6-4000 (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 3200 (min-1), Max. speed with siemens : 3200 (min-1), Control : Fanuc31i.
 
  424
IDMA24349
MakeMonfort,Germany
ModelRNC700
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000/1500 mm, Swing diameter over bed : 720 mm, Swing diameter over cross slide : 550 mm, Spindle nose DIN 55026 : All, Internal drew tube diameter :86, Drive power (100%40%DR) with fanuc : 30/37*** kw, Drive power (100%60%DR)with siemens : 37/46***, Speed range with fanuc :8-4000(min-1), Speed range with siemens : 6-4000 (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 3200 (min-1), Max. speed with siemens : 3200 (min-1), Control :Siemens Sinumerik 840D solutionline.
 
  425
IDMA24348
MakeMonfort,Germany
ModelRNC700
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000/1500 mm, Swing diameter over bed : 720 mm, Swing diameter over cross slide : 550 mm, Spindle nose DIN 55026 :All, Internal drew tube diameter : 86, Drive power (100%40%DR) with fanuc : 30/37*** kw, Drive power (100%60%DR)with siemens:37/46***, Speed range with fanuc : 8-4000 (min-1), Speed range with siemens : 6-4000 (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 3200(min-1), Control : Siemens Sinumerik 840D Solutionline.
 
  426
IDMA24347
MakeMonfort,Germany
ModelRNC600
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000 mm, Swing diameter over bed : 640 mm, Swing diameter over cross slide : 505 mm, Spindle nose DIN 55026 :A8(All)*, Internal drew tube diameter : 86(90)*, Drive power (100%40%DR) with fanuc : 18,5/22 kw, Drive power (100%40%DR) with siemens : 28/42 kw, Speed range with fanuc : 44-4000 (44-2000)* (min-1), Speed range with siemens : 31-4000 (31-2000)* (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc :13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Control : Fanuc31i,.
 
  427
IDMA24346
MakeMonfort,Germany
ModelRNC600
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000 mm, Swing diameter over bed : 640 mm, Swing diameter over cross slide : 505 mm, Spindle nose DIN 55026 : A8(A11)*, Internal drew tube diameter : 86 (90)*, Drive power (100%40%DR) with fanuc : 18,5/22 kw, Drive power (100%40%DR) with siemens :28/22 kw, Speed range with fanuc : 44-4000 (44-2000)* (min-1), Speed range with siemens : 31-4000 (31-2000)* (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Control : Siemens Sinumerik 840D solutionline.
 
  428
IDMA24345
MakeMonfort,Germany
ModelRNC500
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000 mm, Swing diameter over bed : 600 mm, Swing diameter over cross slide : 425 mm, Spindle nose DIN 55026 : A8, Internal drew tube diameter : 86, Drive power (100%40%DR) with fanuc : 18,5/22 kw, Drive power (100%40%DR) with siemens :28/42 kw, Speed range with fanuc : 44-4000 (min-1), Speed range with siemens : 31-4000 (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Spindle nose DIN 55026 :A6, Spindle bore : 64 mm, Internal draw tube diameter : 52 mm, Drive power (100%40%DR) : 22/25 kw, Speed range with fanuc : 50-4000 (min-1), Speed range with siemens : 25-4000 (min-1), Max. torque : 210/239 nm, Control : Fanuc31i, with synchronous built-in spindle.
 
  429
IDMA24344
MakeMonfort,Germany
ModelRNC500
YOM
ConditionBrand New
PhotoSee Photo
The high performance turning lathe, Turning length : 1000 mm, Swing diameter over bed : 600 mm, Swing diameter over cross slide : 425 mm, Spindle nose DIN 55026 : A8, Internal drew tube diameter :86 mm, Drive power (100%40%DR) with fanuc : 18,5/22 kw, Drive power (100%40%DR) with siemens :28/42 kw, Speed range with fanuc : 44-4000 (min-1), Speed range with siemens : 31-4000 (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 13,7 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Spindle nose DIN 55026 :A6, Spindle bore : 64 mm, Internal draw tube diameter : 52 mm, Drive power (100%40%DR) : 22/25 kw, Speed range with fanuc : 50-4000 (min-1), Speed range with siemens : 25-4000 (min-1), Max. torque : 210/239 nm, Control : Siemens Sinumerik 840D solutionline, with synchronous built-in spindle.
 
  430
IDMA24343
MakeMonfort,Germany
ModelRNC400
YOM
ConditionGood Condition
PhotoSee Photo
The high performance turning lathe, Turning length : 600 mm, Swing diameter over bed : 420 mm, Swing diameter over cross slide : 280 mm, Spindle nose DIN 55026 : A6(A8)*, Internal drew tube diameter : 67 (86)*, Drive power (100%40%DR) with fanuc : 18,5/22 kw, Drive power (100%40%DR) with siemens : 23,7/33,6 kw, Speed range with fanuc : 44-4000 (min-1), Speed range with siemens : 31-4000 (min-1), Number of drive tool stations : 12, Max drive power (25%DR) with fanuc : 7,2 kw, Max. drive power (25%DR) with siemens : 12,6 kw, Max. speed with fanuc : 4000 (min-1), Max. speed with siemens : 4000 (min-1), Spindle nose DIN 55026 :A6, Spindle bore : 64 mm, Internal draw tube diameter : 52 mm, Drive power (100%40%DR) : 22/25 kw, Speed range with fanuc : 50-4000 (min-1), Speed range with siemens : 25-4000 (min-1), Max. torque : 210/239 nm, Control : Fanuc31i, with synchronous built-in spindle.
 
  431
IDMA24341
MakeMonfort,Germany
ModelRNC400
YOM
ConditionGood Condition
PhotoSee Photo
The high performance turning lathe,
Turning length : 600 mm,
Swing diameter over bed : 420 mm,
Swing diameter over cross slide : 280 mm,
Spindle nose DIN 55026 : A6(A8)*,
Internal drew tube diameter : 67 (86)*,
Drive power (100%40%DR) with fanuc : 18,5/22 kw,
Drive power (100%40%DR) with siemens : 23,7/33,6 kw,
Speed range with fanuc : 44-4000 (min-1),
Speed range with siemens : 31-4000 (min-1),
Number of drive tool stations : 12,
Max drive power (25%DR) with fanuc : 7,2 kw,
Max. drive power (25%DR) with siemens : 12,6 kw,
Max. speed with fanuc : 4000 (min-1),
Max. speed with siemens : 4000 (min-1),
Spindle nose DIN 55026 :A6,
Spindle bore : 64 mm,
Internal draw tube diameter : 52 mm,
Drive power (100%40%DR) : 22/25 kw,
Speed range with fanuc : 50-4000 (min-1),
Speed range with siemens : 25-4000 (min-1),
Max. torque : 210/239 nm,
Control : Siemens Sinumerik 840D Solutionline,
with synchronous built-in spindle.
 
  432
IDMA24277
MakePinacho
ModelTaurus310
YOM2000
ConditionGood Condition
PhotoSee Photo
Spindle bore : 105 mm,
Centre height : 310 mm,
3-jaw chuck : 315 mm,
Swing over bed : 620 mm,
Swing over crossslide : 415 mm,
Max.distance between centres : 2000 mm,
Spindle speeds : 0-2500 rpm,
Main motor : 10 HP,
Complete with MULTIFIX toolholder,
Software can support atc,
Control : FAGOR.
 
  433
IDMI5705
MakeCincinnati Milacron,Austria
Model18-60 MO
YOM
ConditionGood Condition
PhotoSee Photo
Swing over bed : 860mm,
Swing over saddle : 500mm,
Max turned diameter : 400mm,
Max turned Length : 1710mm,
Max distance between centers : 1720mm,
Spindle speeds : 12 – 1200rpm,
Spindle bore : 130mm,
Feeds : 2.5 – 5080mm/min,
Rapids : 10m/min,
Complete with 7 position
Bottom OD turning turret,
7 position top ID/OD tuning boring turret,
2 No hydraulic 2 point
Fixed steadies,
380mm 3 jaw hydraulic chuck,
Powered tailstock,
Swarf conveyor,
Coolant,
Manuals,
Spindle motor 37kw,
Approximate dimensions 7000 x 3050 x 2600mm,
Approximate Weight 10,000kg.
Control : Acramatic 900 CNC Control.
 
  434
IDMI5691
MakeMazak,Japan
Model
YOM1989
Condition
PhotoSee Photo
X-axistravel-335 mm, Z-axis travel-1045 mm, Tool capacity-16 tools, Spindle end shape-JIS A26, Spindle thru-hole-80 mm, Chuck diameter-15 Inch, Accessories: Machine Operating System, Mazatrol Cam T-3, Type:ST30 ATC MC
 
  435
IDMA22894
MakeGeorge Fisher
Model
YOM
ConditionGood Condition
PhotoSee Photo
Turning diameter- 400x1800 mm with Programmable Tailstock, 2 Point Programmable Steady, 12 Station Turret, Swarf Conveyor, Rebuilt up to 90% incl. new drives, NEW SIEMENS CNC CONTROL.
 
  436
IDMI5599
MakeKirloskar,India
ModelWarner & Swasey C5
YOM
ConditionExcellent
PhotoSee Photo
Chuck dia- 325 mm, Swing dia- 700 mm, Between centres- 1200 mm, 8 station, hydraulic turret, Controller: Fanuc 6T
 
  437
IDMA22799
MakeIkegai,Japan
ModelANC56
YOM1987
ConditionGood Condition
PhotoSee Photo
Swing over bed- 1100 mm, Swing over cross slide- 800 mm, Center distance- 3000 mm, Fixed steady rest- 1000 mm 600 mm 400 mm, Automatic indexing square+ hexagonal turret, Chip conveyor
 
  438
IDMI5585
MakeHardinge
ModelT51
YOM1996
ConditionGood Condition
PhotoSee Photo
Max Turning Dia- 260 mm, Max Turning Length-570 mm, Distance Between Centres- 600 mm, Spindle Speeeds -TO 4200 RPM, 20HP, 12 Position TOOL TURRET, POWER TAILSTOCK, POWER STEADY REST FLOOD COOLANT,
AC MOTORISED CHIP CONVEYERCS-51 , CL-374-C 2 Axis, GE FANUC 18I CNC CONTROL. Qty: 4 nos
 
  439
IDMI5575
MakeMazak,Japan
ModelSlant Turn ST40N
YOM
ConditionGood Condition
PhotoSee Photo
400 A.P. (max diam.800 mm) between center 2000,
Distance between center: 2060 mm,
Max. swing: 540 mm,
Max. diameter of shaft work: 370 mm,
Spindle nose: 104 mm,
Spindle speed: 6-3000 rpm,
Spindle indexing: C-axis 360, 0.001,
X= 550 mm,
Z= 2122 mm,
Cutting feed rate: X, Z axis 10 m/min,
Bed slide width: 710 mm,
Diam. of tailstock quill: 100 mm,
Tailstock center: MT no. 4,
Tailstock body stroke: 1850 mm,
Main motor drive: 40 hp,
Type of turret: 2 position turret with ATC,
Max. tool magazine: 80 rotary and turning tools,
Rotary tool spindle: NT no. 50,
Rotary tools spindle speed: 20-3000 rpm,
Rotary tool spindle motor: Hp 5.5 kw,
Turret clamping force: kg. 600,
Purification plant KNOLL,
Feeder and robot with 30 workstation, transformer and tools
CNC FANUC 11T.
Machine weight: kg. 11400.
 
  440
IDMA22405
MakeMorris Seiki
ModelZL200SMC
YOM
ConditionGood Condition
PhotoSee Photo
CAPACITY: Swing over bed: 670 mm,
Swing over cross slide: 502.5 mm,
MAX. DISTANCE BETWEEN SPINDLE Large noises: 740 mm MAX,
TURNING DIA: TURRET 1: 382.5 mm,
TURRET 2: 290 mm,
MORI SEIKI MSC-501 CNC CONTROL 8'' CHUCK MAIN/6'' CHUCK SUB.
 
  441
IDMI5539
MakeDaewoo Puma
Model12S
YOM1994
ConditionUnder power
PhotoSee Photo
Chuck Size:No Chuck . Recommended Size 300 / 304.8 mm, Power-35hp / 26.1 kW, RPM-3000 rpm, Turning Dia- 475 / 482.6 mm,Swing- 570 / 579.1 mm, Centers-1005 / 1,021.1 mm, Tailstock-Yes, Turret-12 Station, Dimensions- 3425 x 2050 mm,Weight-17,400 Lbs.,Control-Fanuc OTC
 
  442
IDMA21776
MakeChinese
ModelSL52S
YOMBrand New
ConditionBrand New
PhotoSee Photo
2 Axes CNC controller FANUC OI Mate Td, Max. Swing Over Bed: 540mm, Max.Turning length: 400mm, Max. Turning Dia:280mm, Travels: X/Z:155/430mm, Rapid feedrate of X/Z:20/20M/min, Motor: Spindlemotor: 7.5/11KW, Spindle:Spindle Bore Dia.51mm(4000rpm),Spindle NoseA2-^, Turret Type: Hydraulic Turret, Turret:10 Tool station, Tailstock:Travel 280(MT4), Tailstock Type: Programmable Tailstock, Chuck 3JAw Dia. 8 inch, Chip conveyor and chip bucket, Full enclosed splash guard, Telescopic cover for all axis, Heat exchanger, Blasting- pistols, Low energy Work Light, LED3 Color Alarm Light, Complete Telescoping Cover, Centralised Auto Lubrication System, LEveling Bolts & Leveling Blocks, Foot Switch, Tools & Tool Box, Operation Manual
 
  443
IDMA21667
MakeMicrocut
ModelBNC2600X
YOM
ConditionBrand New
PhotoSee Photo
Swing in gap 890 mm,
Swing over bed 650 mm,
swing over cross slide 410 mm,
Max. turning length (with turret)1500 mm,
Bar capacity (hyd. chuck cylinder) 91 on 106 mm bore,
Gap length from spindle nose surface 283 mm,
Max. work piece weight (with tailstock) 2000 kg.
Travels: X= 300 mm, Z= 1150 mm,
Spindle range: choice 1 = 80-3500 rpm, choice 2 = 80-2400 mm,
Suitable chuck size 315 mm,
spindle nose 106 mm bore,
Spindle hole dia. 106/153(option) mm,
Number of tool stations 8,
Tool allowance 25 mm,
Tool sdhank 40 mm,
Indexing time 0.42 (Baruffaldi) sec.,
Feed rate: X axis rapid traverse - 12 for B.C.D. 4M, Z axis Rapid traverse - 15 m/min,
Jog feed 3 m/min,
Accuracy : Positioning +/- 0.005 mm, Repeatability 0.005 mm,
Slide: Overall bed guide width 405 mm,
Cross slide guide width 215 mm,
Feed Motors: X axis power 9.3 Nm, Z axis power 17.3 NM,
Ball screw: X axis 32*5-C5, Z axis 50*10-C5,
Tailstock: quill stroke 150 mm, quill dia 100(std.) mm, quill inside taper 5 MT,
Coolant: Pump motor 450 w, pump capacity 55 L/min, pump pressure 2.4 kg/cm2,
tank capacity 200 L,
Pump motor 25 w,
Pump capacity 130 cc/min,
Weight 4150 kg.
Dimensions (LxWxH): 3190 x 2225 x 2050 mm,

 
  444
IDMA21666
MakeMicrocut
ModelBNC2200X
YOM
ConditionBrand New
PhotoSee Photo
Swing in gap 790 mm,
Swing over bed 550 mm,
swing over cross slide 310 mm,
Max. turning length (with turret)1000 mm,
Bar capacity (hyd. chuck cylinder) 69 on 82 mm bore,
Gap length from spindle nose surface 283 mm,
Max. work piece weight (with tailstock) 2000 kg.
Travels: X= 300 mm, Z= 1150 mm,
Spindle range: choice 1 = 80-3500 rpm, choice 2 = 80-2400 mm,
Suitable chuck size 250 mm,
spindle nose 82 mm bore,
Spindle hole dia. 82(std.) mm,
Number of tool stations 8,
Tool allowance 25 mm,
Tool sdhank 40 mm,
Indexing time 0.42 (Baruffaldi) sec.,
Feed rate: X axis rapid traverse - 15 for B.C.D. 3M & below, Y axis Rapid traverse - 15 m/min,
Jog feed 3 m/min,
Accuracy : Positioning +/- 0.005 mm, Repeatability 0.005 mm,
Slide: Overall bed guide width 405 mm,
Cross slide guide width 215 mm,
Feed Motors: X axis power 9.3 Nm, Z axis power 14.8 NM,
Ball screw: X axis 32*5-C5, Z axis 45*10-C5,
Tailstock: quill stroke 150 mm, quill dia80(std.) mm, quill inside taper 5 MT,
Coolant: Pump motor 450 w, pump capacity 55 L/min, pump pressure 2.4 kg/cm2,
tank capacity 150 L,
Pump motor 25 w,
Pump capacity 130 cc/min,
Weight 3900 kg.
Dimensions (LxWxH): 3190 x 2225 x 2050 mm,

 
  445
IDMI5429
MakeMiyano
ModelLD41
YOM1994
ConditionGood Condition
PhotoSee Photo
Chucking work capacity RD: 2-5/16", Collet chuck (Round): 1-3/4", Hexagon:1-1/2", Square:1-3/16", Collet Chuck:3-3/16", Minimum machining length collet chuck:3/4", Product length in that case of regrasping machining by main spindle sub spindle:workpiece diax1.5, Power chuck size:5", Chucking work capacity, round:2-5/16", Maximum machining length power chuck:2", Minimum machining length power chuck:3/4", Spindle nose diameter:6-1/2", Spindle nose:A2-6, Maximum slide strokeX:132.8, Z axis:246mm, Rapdui traver rate:X axis: 394IPM, Zaxis:3941pm
 
  446
IDMA21052
MakeIkegai,Japan
ModelANC30
YOM
ConditionGood Condition
PhotoSee Photo
Swing:(max) 660mm, between centers:2,000mm, tool turret:6-way, controller:FANUC series18-T,
 
  447
IDMA21015
MakeHankook
Model13N
YOM2008
Conditionnever used
PhotoSee Photo
FANUC 21i CNC control, Maximum Swing over bed:1280mm,Maximum swing over cross slide:925mm, maximum turning dia:1280mm, Distance between center:5906mm,bed width:788mm,Spindle bore:103.25,Spindle nose:A2-15,spindle speeds( 4 ranges) 1-630rpm, X-axis travel:708.5m,X-axis rapid traverse:3937,Z-Axis rapid traverse:5905, Tailstock Quill Diameter:196mm, Tailstock quill travel:246mm, Tailstokc quill tpaer:MT#6, Weight capacity between centerSL17,600 lbs, Approx.machine weight:40,300lbs
Equipped with FANUC @li CNC conyytol, 787.5mm 4 jaw chuck
duplomatic BSV-N 8 position vertical turret, steady rests
chip conveyor, 37KW/$5KW Spindle motor
 
  448
IDMA21012
MakeExcel,Taiwan
Model
YOM
ConditionGood Condition
PhotoSee Photo
swing over bed:375mm, distance between centres:1000mm, RPM:82-1400, 3 jaw chuck
 
  449
IDMA21010
MakeMori Seiki
ModelCL203-500
YOM1999
ConditionGood Condition
PhotoSee Photo
MSG-803(Meldas)
 
  450
IDMA21009
MakeMori Seiki
ModelCL203-500
YOM1999
ConditionGood Condition
PhotoSee Photo
Controller: MSG-803(Meldas)
 
  451
IDMA20827
MakeDainichi
ModelMG63
YOM1984
ConditionGood Condition
PhotoSee Photo
Chuck dia. 3000 mm,
Max. Turning dia. 630 mm,
Max. Turning length 3000 mm,
Control : Fanuc 3T.

 
  452
IDMA20787
MakeNakamura Tome,Japan
ModelST4
YOM1985
ConditionGood Condition
PhotoSee Photo
Nakamura 2 axis lathe; Fanuc 10TE-F control; spindle bore 80mm; 700mm swing over bed covers x 500mm; 12 station turret; 300mm dia 3 jaw chuck; tailstock; tooling; manuals; excellent condition.
 
  453
IDMA20786
MakeNakamura Tome,Japan
ModelTMC35X
YOM1989
ConditionGood Condition
PhotoSee Photo
Nakamura twin turret lathe; Fanuc 11TT control; spindle bore 80mm; swing over bed covers 580mm x 1000mm; 8 tool front turret; 10 station rear turret; 250mm dia 3 jaw chuck; tailstock; swarf conveyor; tooling; excellent condition.
 
  454
IDMA20785
MakeNakamura Tome,Japan
ModelTMC30
YOM
ConditionGood Condition
PhotoSee Photo
2 axis CNC Bar Lathe,Nakamura CNC lathe with Fanuc 0T control; bar capacity 42mm; Sameca Monosam 65 bar feed; 10 station turret; swing 400mm dia.; turning capacity 220mm dia x 300mm; tailstock; speeds to 4500 rpm; collet chuck, collets, tooling, 11 kw; manual.
 
  455
IDMA20681
MakeFerro Tool
Model
YOM
ConditionGood Condition
PhotoSee Photo
Maximum swing over bed 500 mm,
Distance between centres 300 mm,
Maximum diameter to machine 150 mm,
Motor 5,5 kw,
Approximate weight 3400 kg,
Dimensions 2100x1500x2000 mm,
Additionnal information
- Contre-pointe hydraulique,
- 2 tourelles 4 positions,
- 1 tκte de fraisage.
 
  456
IDMA20680
MakeMori Seiki
ModelZL25
YOM
ConditionGood Condition
PhotoSee Photo
Maximum swing over bed 520 mm,
Maximum swing over cross-slide 350 mm,
Distance between centres 645 mm,
Height of centres 260 mm,
Hole through spindle 80 mm,
Spindle speed 35 ΰ 3500 tr/mn,
longitudinal feeds 12000 mm/mn,
cross feeds 15000 mm/mn,
Numerical control FANUC MORIC D5F,
Metric and Whitworth thread box,
Motor 15 kw,
Approximate weight 6980 kg.
Dimensions 4520x1740x1910 mm.
 
  457
IDMA20610
MakeGildemeister,Germany
Model
YOM1986
ConditionGood Condition
PhotoSee Photo
Churchill Ecostar – T
Year 1990
CNC Fanuc OT
Turning diameter 400
Turning length 600mm
Revolver 12 pos
Chuck hydr. Ψ200
Spindle hole Ψ65
With tailstock
Gildemeister CT40, Control: Fanuc 6T, with tailstock, chuck
 
  458
IDMA20595
MakeHardinge
Model8/52 E
YOM2006
ConditionExcellent condition,almost new
PhotoSee Photo
FANUC Oi-Mate, Round collet diameter: 52, Jaw chuck diameter:210mm, Max.work piece diameter:284mm, Max work piece length: 406mm, Travel of X:218mm, Y:406mm, Max. Spindle speed, rmp :5000, Max travel speed of axes X/Y, m/min: 30, Machine dimensions (LxWxH), :1998x1650x1750, Machine weight, kg: 2800,Max.number of tools :12
 
  459
IDMA20573
MakeGildemeister,Germany
ModelCTX310V3
YOM2007
ConditionGood Condition
PhotoSee Photo
SIEMENS 480D, Swing Dia:505mm, X/Z Axis Travel:213x450mm, Spindle speedL25-6000rpm
 
  460
IDMA20553
MakeHwacheon
Model
YOM2003-04
ConditionVery good condition
PhotoSee Photo
Chuck Size 450 mm,
Max.Speed recomended 450 mm hand chuck 750..power chuck 1000,
Max.Speed recomended 600 mm hand chuck 560 power chuck 1000,
Max. Speed recomended 700 mm hand chuck 480 power chuck 860,
Max, Speed recomended 800 mm hand chuck 410 power chuck 750,
Distance Between Centers 3200 mm,
Swing 965 mm,
Swing Over Cross Slide 655 mm,
Swing Over Gap 1210 mm,
Gap Width (from spindle nos) 388 mm,
Bar Diameter 150 mm,
Max. Workpiece Weight Between Centers 6600 lbs.
Spindle Nose A2-15,
Spindle Bore 153 mm,
Spindle Speed (3 Range Manual Shift) 40-1000 rpm
Variable Speed in Each Range:
Low Range 40-115 rpm
Middle Range 116-340 rpm
High Range 341-1000 rpm
Spindle Horsepower (Cont/30 min) 30/25 (A.C.)
Travel:
X-Axis 236 IPM
Z-Axis 236 IPM
Feedrate 0.04-157 IPM
Tailstock:
Spindle Center MT #6
Spindle Travel 255 mm.
Equipped With :
Fanuc 21TB Control with Movable Control Box,
Standard Worklight,
Complete Coolant System,
Semi Enclosed Splash Guard -Full back guard,
Tailstock,
12 position tool post with 3 boring tool holders-2 turning tools.
18" Jaw Manual Chuck,
Live Center (MT6).
 
  461
IDMA20552
MakeHwacheon
Model58
YOM2002
ConditionGood Condition
PhotoSee Photo
Spindle Through Hole 75 mm,
Spindle Nose A1-8
Spindle Bore 75 mm,
Spindle Speed 15/20 hp
Low Range 30-500 rpm
High Range. 501-1500 rpm
Travel:
X-Axis173 mm,
Z-Axis 1250 mm,
Tailstock:
Spindle Center MT #5
Spindle Diameter 88 mm,
Spindle Travel 148 mm,
Distance Between Centers1310 mm,
Swing 570 mm,
Cross Slide Swing Over 355 mm,
Swing Over Gap 698 mm,
Gap Width (from spindle nose) 288 mm,
Dimensions : 3300 x 1975 x 1875 mm,
Weight of 50" Center 7,720 lbs,
Weight of 70" Center 8,820 lbs,
Speed 1500 rpm.
Equipped with :
14" 3 JAW CHUCK WITH 3" HOLE,
Standard Worklight,
Complete Coolant System,
Semi Enclosed Splash Guard,
Tailstock w/MT No.5 Center,
8 Position DUPLOMATIC Tool Post,
21T FANUC cnc control.
Separate Handle X & Z.
 
  462
IDMA20483
MakeFanuc,Japan
ModelSNC-15
YOM
ConditionGood Condition
PhotoSee Photo
STAT model, SNC-15, CNC sliding head lathe, FANUC 5T control, capacity 15mm dia:130mm, turning length:8mm, dia drilling and tapping max: 5 slides on toolpost, 4 spindle sliding attachment, speeds 950 to 7050rpm, bar feed, collets, tooling, manual
 
  463
IDMA20473
MakeGildemeister,Germany
ModelS2
YOM1998
ConditionGood Condition
PhotoSee Photo
1XCTX 400s, Baujahr, 2 Axis, with LNS Hydrobar.
 
  464
IDMA20434
MakeOkuma,Japan
ModelLT-15MY
YOM2000
ConditionGood Condition
PhotoSee Photo
Twin spindle(opposed), Chucks:8-inch, left turret:12-way, Right turret: 10-way
 
  465
IDMA20418
MakeGurutzpe
Model11-2
YOM
ConditionGood Condition
PhotoSee Photo
Swing over bed-580 mm, Swing over crossslide- 440 mm, Through hole- 200, 30 HP/220/440/3 PH MOTOR, Equipped with: Jaw Rear-460.4, Jaw front- 480.4, Chuck, Steady Rest, Taper Attachment, Timemaster Hollow Spindle Lathe
 
  466
IDMA20396
MakeSchaublin,Swiss
Model
YOM1990
ConditionGood Condition
PhotoSee Photo
Turning dia over face-slide- 115 mm, Turning length- 300 mm, Control-SINUMERIK 810T, Centre height- 140 mm, Turning diameter over bed- 200 mm, Workpiece weight- 10 kg, Spindle diameter in front bearing- 70 mm, Spindle bore- 38 mm, Worktool system- Revovler, Quill stroke- 100 mm, Tailstock quill adjusment- von hand, Total power requirement-18 kW, Spindle drive- 5,5 kW, Power feed longitudinal- 4000 N, Power feed cross- 2500 N, Rapid traverse cross- 6 m/min, Rapid traverse longitudinal- 10m/min, Inclined Bed
 
  467
IDMA20395
MakeTraub
ModelTND 200
YOM1991
ConditionGood Condition
PhotoSee Photo
Turning diameter- 340 mm, Turning length- 205 mm, Control- TX8F, Spindle passage- 42 mm, Turning dia over face slide- 160 mm, Feeds: X axis- 10000 mm/min, Z-axis- 10000 mm/min, Rapid traverse X-axis- 12000 m/min, Rapid traverse Z-axis- 15000 m/min, Power feed longitudinal- 2900 N, Power feed cross- 2400 N, Total power requirement- 20 kW, Weight of the machine- 3 t, Dimensions of the machine- 7x2x2 m
 
  468
IDMA20393
MakeTurret
ModelFS350M
YOM1996
ConditionGood Condition
PhotoSee Photo
Turning diameter- 260 mm, Turning length- 700 mm, Control-FANUC OM, Spindle passage- 45, travel-x axis- 170 mm, travel-x axis- 750 mm, Spindle turning speed range- 45-4500 U/min, Rapid traverse16/20 m/min, Tool taper- VDI 25, Total power requirement- 11 kW, Weight of the machine- 4,0 t, Dimensions of the machine- 3,6 x 1,9 x 2,2 m
 
  469
IDMA20377
MakeColchester
ModelTornado200
YOM1995
ConditionGood Condition
PhotoSee Photo
FANUC O-T,Turning diameter:250mm, Turning length:400mm,Spindle bore dia-65mm, Dimensions: 4.95x1.65x1.75 No of controlled axis- 2, Turning speed Range: 0-35000 u/min, Rapid Speed:20-10 m/min, No of tapers in turret hear - 12VDI40, Tailstock- Ja, Weight of the machine: 3.5T
 
  470
IDMA20371
MakeColchester
ModelTornado80
YOM1996
ConditionGood Condition
PhotoSee Photo
Turning diameter-170mm, Turning length: 350mm, Control: FANUC 21T, Spindle bore dia :42mm, number of control axis: 2, Turning Speec range- 0-4000 u/min, Rapid Soeed- 15/10 m/min, No of tapers in turret head- 12 VDI 30, Tail stock: Neon, Weight of the machine: 2.7T, Dimensions: 2.95x 1.35x 1.75m
 
  471
IDMI5346
MakeDaewoo
ModelPUMA-12 LC
YOM1988
ConditionGood Condition
PhotoSee Photo
SINUMERIC- 802D, Max Turning Length:1050mm, Spindle Bore:80mm
 
  472
IDMA20339
MakeMori Seiki
ModelSL3H
YOM1987
ConditionGood Condition
PhotoSee Photo
 
  473
IDMA20335
MakeIkegai,Japan
ModelAX30
YOM1981
ConditionGood Condition
PhotoSee Photo
F-6T, Hole through spindle 102mm, Swing over bed 600mm, between centres 1500mm,
 
  474
IDMA20320
MakeVDF German
ModelV6
YOM
ConditionGood Condition
PhotoSee Photo
Diameter over bed: 800, Diameter over slide:440, Diameter under chuck (gap):1000, Turn length:3000, Diameter spindle:125, Diameter chuck:700 and 915, Rapid travel (X-Z)
 
  475
IDMA20274
MakeTakisawa,Japan
ModelTC1
YOM1992
ConditionGood Condition
PhotoSee Photo
Controlling system- FANUC OT (M. Dialog controller), Center height- 200 mm, Distance between center- 450 mm, Spindle bore- 45 mm, Diameter over bed- 400 mm, Diameter over slide- 350 mm, Spindle speed- 6000 rpm, Machinery dimension (L/W/H)- Approx 2000/1300/1700 mm, Weight approx- 2700 kg.
Accessories:
1) Three jaw chuck KITAGAWA, Typ:B-206, 170 mm with jaws.
2) Collet chuck F-48 with 45 collets.
3) 1 Tool holders
4) Laptop for programming
5) Shim chuck PILZ with jaws
6) 5 round reducing sleeves
7) Coolant system, Machine feet, Instruction manual.
 
  476
IDMA20273
MakeExcel,Taiwan
ModelSL320-600
YOM1995
ConditionGood Condition
PhotoSee Photo
Center height- 225 mm, Distance between center- 600 mm, Spindle bore-82 mm, Diameter over bed- 450 mm, Diameter over slide- 270 mm, Speed-40-4000 rpm./(2 levels), Motorpower- 18.5 KW (permanently)/22 KW S3
Accessories:
1) Hydr three jaw chuck KITAGAWA, Typ: B-210, Diameter-255 mm with jaws.
2) Autom turret BARUFFALDI, Typ: TOE-VDI40
3) Chip conveyor with coolant system
4) Hydr tailstock
5) 31 Tool holders VD140
6) Tailstock centers
Instruction manual complete.
 
  477
IDMA20265
MakeTakisawa,Japan
ModelTC 20
YOM
ConditionGood Condition
PhotoSee Photo
FANUC21T, X:140mm, Z:370mm, Dimensions:1600x1250x1890mm. MAx swing over bed: 420mm, max turning dia: 250mm, distance between centres-307mm, Turret :12 outtils, Taper of tailstock sleeve- CM4, Approx wt- 2500Kg
 
  478
IDMA20264
MakeBiglia
ModelB600/8
YOM
ConditionGood Condition
PhotoSee Photo
Dimensions :3200x1500x1700mm, Max swing over bed- 400mm, max dia over machine- 360mm, distance between centres- 650mm, hole through spindle- 70mm, spindle speed-2200tr/min, approx wt- 5450 kg
 
  479
IDMA20263
MakeNakamura
Model
YOM
ConditionGood Condition
PhotoSee Photo
FANUC 6T, Dimensions: 3100x1900x1540, MAx swing over bed:300mm, Max swing over cross slide: 300,, Distance between centres -355mm, Hole through spindle -28mm, Spindle sPeed -45000tr/min
Bar Passage dia- 33mm, Hole through spindle: 28mm, bar passage dia-33mm, Approx wt-2850kg
 
  480
IDMA20261
MakeAlexTech
ModelANL 108
YOM
ConditionGood Condition
PhotoSee Photo
FANUC O-T, Dimensions 2020x1346x1640mm, X:125mm Z:250mm, Distance between centres-120mm, MAx bar diameter-27/42mm, Inner diameter of spindle:35mm, Max swing over bed- 120mmApprox wt- 1950kg
 
  481
IDMA20258
MakeAlexTech
ModelANL 250
YOM
ConditionGood Condition
PhotoSee Photo
FANUC O-T,Dimensions :2020x1346x1640mm,X:250mm, Z:250mm,Max bar diameter- 26/40mm, Inner diameter of spindle- 35mm, Spindle Nose- ISO A2-4, Spindle Speed: 150-400 tr/mn,
 
  482
IDMA20255
MakeBiglia
ModelB2M
YOM
ConditionGood Condition
PhotoSee Photo
Dimensions- 4515X2320X2215, Weight- 6500KG, Maximum turning diameter- 360mm, Max turning length- 525mm, Bar Passage dia-56mm, Spindle Speed l 3500tr/mn
 
  483
IDMA20231
MakeOMG
ModelZanoletti 200
YOM1991
ConditionGood Condition
PhotoSee Photo
Centers distance- 800 mm, Max distance over bed- 520 mm, Max distance over saddle- 300 mm, Spindle motor power- 15 KW, CNC SIEMENS 810 T, Complete with: - N. 1 8 Positions automatic turret, - N. 1 Self centering Chuck distance- 250 mm, - Chipconveyor, - Tool-Holders
 
  484
IDMA20229
MakeDaewoo Puma
ModelPUMA8
YOM
ConditionGood Condition
PhotoSee Photo
CNC Fanuc, Distance between centers -381mm, Bed- 450mm, Transversal Carriage dia- 250mm, Maximum cutting dia- 180mm, Maximum cutting length- 356mm, Spindle bore dia- 57mm, Spindle bore taper- MT #6
Approx Weight -4,000kg
 
  485
IDMA20226
MakeAMUTIO EMAG
ModelUSC2
YOM
ConditionGood Condition
PhotoSee Photo
CNc Siemens Sinumerik 3T/4, Bed Size- 600mm, Spindle -8mm, Maximum Bar PAss -76mm, Motor Power- 34kw, 2800rpm Hydraulic Plate- 400mm with 3 hooks and 1 cylinder
 
  486
IDMA20210
MakeSMT Swedturn
Model12
YOM
ConditionGood Condition
PhotoSee Photo
Centers distance- 1372 mm, Max dia admitted on the saddle- 380 mm, Max dia admitted on the bed- 580 mm, Saddle stroke (Z axis)- 1400 mm, Vertical slide stroke (X axis)- 380 mm, Spindle motor- 35 kW, Spindle hole- 93 mm, Turret VDI 3425 With 12 Positions
 
  487
IDMA20208
MakeHeyligenstaedt
Model10U
YOM1980
ConditionGood Condition
PhotoSee Photo
Turning dia on the bed- MM 480, Turning dia on the saddle- MM330, Centers distance- MM 3000, Spindle Hole dia- MM 105, Spindle Motor Power- CV 60, Automatic turret with 12 positions, Chips Conveyor, CNC Macs 522 ELSAG
 
  488
IDMA20204
MakeOkuma,Japan
ModelLC402SC
YOM1987
Conditioncan be inspected under power
PhotoSee Photo
turning diameter over bed 0550 mm,
turning length 1250 mm,
control OSP 5000 L-G,
turning diameter over bed slide 420/300 mm,
spindle turning speed - stepless 10 - 2500 U/min,
spindle bore 90 mm,
feeds 0 - 5000/10000 mm/min,
rapid power traverse in X-and Z direction 5/10 m/min,
voltage 400 V,
connected load 45 kW,
face slide travel 300/170 mm,
longitudinal travel 1250 mm,
dimensions of the machine ca. 5,2 x 2,4 x 2,5 m,
weight of the machine ca. 10 t.
4 axes CNC lathe with two saddles, each with turret head, and with tailstock.
Control: OSP 5000 L-G.
Accessories: 3 jaw automatic chuck Forkhardt 3 FNC 400 mm, steady, faceplate 550 mm, chip conveyor and toolholders.
 
  489
IDMA20203
MakeNiles-Simmons
ModelN12
YOM1996
Conditioncan be inspected under power
PhotoSee Photo
turning diameter over bed 0450 mm,
turning length 1500 mm,
control S 840 C,
turning diameter over bed slide 280 mm,
spindle turning speed - stepless 0 - 5000 U/min,
spindle bore 54 mm,
rapid power traverse in X-and Z direction m/min,
voltage 400 V,
connected load 29 kW.
Machine has one 12 position turret, tailstock, chip conveyor, automatic steady, power chuck and Siemens Sinumerik
840 C control.
 
  490
IDMA20202
MakeNiles-Simmons
ModelN10
YOM1995
Conditioncan be inspected under power
PhotoSee Photo
turning diameter over bed 0400 mm,
turning length 1000 mm,
control S 840 C,
turning diameter over bed slide 280 mm,
spindle turning speed - stepless 0 - 5000 U/min,
spindle bore 54 mm,
feeds mm/min,
rapid power traverse in X-and Z direction m/min,
voltage 400 V,
connected load 29 kW.
 
  491
IDMA20199
Make
Model
YOM
ConditionGood working condition
PhotoSee Photo
1) Used CNC lathe in a good working condition, Make-INDEX, Model- G 65-250, Control- SINUMERIC
2) Make: GILDEMEISTER,Model: NEF 480 SIEMENS,max. width:1000 mm
turning diameter above carriage: 280 mm, urning diameter above bed: 490 mm, X-axle:300 mm,
Equipped with: 2 multifix restraint systems
turnable swarf blinds
man. tailstock:MKV
sep. control cabinet
spindle revolutions:31,5 – 2240 mm
3-jaw chuck
Motor / motor:380 V 50 Hz 11 kW
3) 1 used cnc lathe in a good working condition, Make- WMW, Model-DXF 2a, Working area: Swing over bed-550 mm, Swing over bed with guideways covered- 510 mm, Slide way X-axis- 300 mm, Slideway Z-Achse (max working piece length)- 1330 mm, Tailstock drivable way for pressing- 1000 mm
 
  492
IDMA20197
MakeBridgeport
Model
YOM
ConditionGood Condition
PhotoSee Photo
1. Bridgeport Romni, CNC Lathe ,1995
2. Bridgeport 720X, CNC Machining Centre 1900
To be sold together as at package price of GBP 11,000
 
  493
IDMA20177
MakeErnault Toyoda
Model
YOM
ConditionGood Condition
PhotoSee Photo
1) 5 x Ernault-Toyoda HES 52:
Swing over bed - Ψ 480 mm, Swing over cross-slide – 400 mm,Distance center tot center - 1000 mm, Axis Z – 1325 mm, Axis X – 365 mm, Spindle cone – Iso A1/8, Dia of spindle bore – 77 mm, Number of speads – max. 4000, Power on spindel - 37 kW, Command - NUM control, Motors - Fanuc, Toolchanger – 12 positions, Weight–9500 mm
2) Ernault-Toyoda HES 32:
Swing over bed - Ψ 330 mm, Swing over cross-slide – 275 mm,Distance center tot center - 550 mm, Axis Z – 790 mm,Axis X – 260 mm, Spindle cone – A2-6, Dia of spindle bore – 79,5 mm, Number of speads – 200 >> 4000, Power on spindel - 22 kW, Command -NUM control, Motors - Fanuc,Toolchanger – 12 positions, Weight –6500 kg


 
  494
IDMA20151
MakeAeroTurn
ModelLT250
YOM2007
ConditionGood Condition
PhotoSee Photo
X/Z Axis Travel 320 x 310 mm, Max. Swing Over bed 470mm, Max. Turning Dia 260 mm,
Max. Turning Length 290 mm, Chuck Size 200 mm, , Bar Capacity 52 mm , Spindle Speed 4,500 RPM, Spindle Motor 15HP, Controller FANUC 0i Mate-TC
 
  495
IDMA20130
MakeGildemeister,Germany
ModelCTX400V1
YOM2005
ConditionVery good condition
PhotoSee Photo
workpiece size 570 x 635 mm, spindle 25-5.000 RPM , rod dia 65 mm, turret 12 pcs, CNC Heidenhain IT
 
  496
IDMA20129
MakeGildemeister,Germany
ModelCTX420 Linear
YOM2007
ConditionVery good condition
PhotoSee Photo
max workpiece dia 680 mm, dia od workpiece 420 mm, length of workpiece 635 mm, spindle 20-5.000 RPM, feed speed upto 50/min , Axis C. Turret station 12 pcs rod dia 65 mm, CNC Fanuc 180i
 
  497
IDMA20127
MakeGildemeister,Germany
ModelCTX420 Linear
YOM2007
ConditionVery good condition
PhotoSee Photo
max workpiece dia 680 mm, dia od workpiece 420 mm, length of workpiece 635 mm, spindle 20-6.000 RPM, feed speed upto 50/min , Axis C. Turret station 12 pcs rod dia 65 mm, CNC Heidenhain Plus IT.
 
  498
IDMA20126
MakeGildemeister,Germany
ModelCTX210V3
YOM2007
ConditionVery good condition
PhotoSee Photo
workpiece dia 380 mm, workpiece length 305 mm, rod passing dia 42 mm, rod feed 1100 mm,Siemens 840D CNC
 
  499
IDMA20125
MakeGildemeister,Germany
ModelCTX410V3
YOM2004
ConditionVery good condition
PhotoSee Photo
workpiece size 505 x 635 mm, rod dia 65 mm, spindle 5000 RPM , axis C , turret station 12 pcs, CNC Siemens 840D
 
  500
IDMA20124
MakeGildemeister,Germany
ModelCTX310V3
YOM2002
ConditionVery good condition
PhotoSee Photo
workpiece dia 330 mm, workpiece length 450 mm, rod dia 51 mm, spindle 25-5000 RPM , turret 12 pcs, Heidenhain iT DIN Plus.
 
  501
IDMA20109
MakeDainichi
ModelF30 x 1250
YOM1998
ConditionGood Condition
PhotoSee Photo
Maximum Swing Over Bed - 540 mm, Maximum Swing Over Carriage - 393 mm, Maximum Turning Diameter - 342 mm, Maximum Distance Between Centers - 1030 mm, Spindle Nose - A2-200 mm, Spindle Bore - 77 mm, Maximum Bar Capacity - 68 mm, X - 235 mm, Z - 1297 mm, Spindle Speeds (Variable) - 25 to 2,500 RPM, Positions on Turret - 12, Tailstock Quill Stroke - 117 mm, Tailstock Center - 4 MT, Rapid Traverse Rates - X-Axis - 708 IPM, Z-Axis - 945 IPM, Approximate Dimensions - 4600 x 1900 x 1800, Approximate Weight - 13,000 Lbs. EQUIPPED WITH: Fanuc 21T CNC Controls, 300 3-Jaw Kitagawa Chuck, 12 Position Turret, Turbo MD Chip Conveyor, Programmable Tailstock, Full Enclosure, Misc. OD & ID Tool Holders, Manuals, Motor Driven with 15 HP AC Motor and Controls, MD Coolant System, MD Chip Conveyor.
 
  502
IDMA20101
MakeCMT
ModelURSUS PLUS CNC
YOM1997
ConditionVery good condition
PhotoSee Photo
Height of centres 250 mm Distance between centres 1500 mm
Spindle/plateau diam 275 mm Spindle speed 2000 rpm Motor power 7,5/11 kw
CNC ALTRO/OTHER Spindle bore 105 mm
Max.swing diam. 505 mm
Universal lathe CNC
CNC NC 916
Rest diam. 120
Manual rapid turret tools holder
Self centering diam. 275
 
  503
IDMA20100
MakePadvoni
ModelE200
YOM1994
ConditionVery good condition
PhotoSee Photo
Height of centres 200 mm Distance between centres 1000 mm
Spindle/plateau diam 155 mm ,
Spindle speed 3000 rpm Motor power 5,5 kw
CNC: SIEMENS Spindle bore: 52 mm
Max.swing diam 400 mm
Horizontal lathe with CNC Siemens 805
Self centering diam 155 ,2 stesdies rest and 1 rest, manual rapid turret tools holder.

 
  504
IDMA20099
MakeGraziano
ModelSAG202
YOM2000
ConditionVery good condition
PhotoSee Photo
Height of centres 285 mm ,Distance between centres 820 mm ,
Spindle/plateau diam 200 mm
Spindle speed 3580 rpm ,Motor power 22 kw ,
CNC NUM Max.swing diam 580 mm ,
Lathe with vertical bed complete of:
Automatic turret tools holder with 12 position
Chip conveyor
 
  505
IDMA20098
MakeGraziano
ModelSAG12
YOM1982
ConditionVery good condition
PhotoSee Photo
Height of centres 210 mm , Distance between centres 1000 mm ,
Spindle speed 38-2000 rpm , Motor power 7,45 kw ,
Spindle bore 57 mm
Max.swing diam 330 mm ,Centre lathe CNC model complete of:
-Quick change tools box 4 positions
-Hydrualic tailstock
-CNC NUMERICON 850
-2 electronics hand wheels
 
  506
IDMA20096
MakeMenti
Model210
YOM1989
ConditionVery good condition
PhotoSee Photo
Height of centres 125 mm , Distance between centres: 580 mm

Spindle speed 0-3000 rpm Motor power 12 kw
CNC: ALTRO/OTHER Spindle bore 56 mm ,
Max.swing diam 250 mm ,
Lathe racking bed complete of:
Chip conveyor.
CNC OSAI 8600

 
  507
IDMA20095
MakeLogos
ModelCN3P
YOM1986
ConditionVery good condition
PhotoSee Photo
Height of centres 220 mm , Distance between centres 500 mm ,

CNC SIEMENS Spindle bore 60 mm
Raking bed lathe complete of:
CNC SINUMERIK 3P
Push-bar
Chip conveyor
 
  508
IDMA20080
MakeMazak,Japan
ModelNexus 250 Universal 500
YOM2005
ConditionGood Condition
PhotoSee Photo
Max rotary- 610mm, Turning-350mm, Turning length-472mm, Spindle speed0 35-4000UpM, Max. Rod Admission- 74mm, X- 190mm, Y-515mm,X rapid feed- 30m/min, z rapid feed- 33m/min,Drive capacity- 26/22kW, Weight-5,100 kg
 
  509
IDMA20056
MakeGildemeister,Germany
ModelNEF Plus 500
YOM1995
ConditionGood Condition
PhotoSee Photo
Center to center - 1000 mm, Center height - 250 mm, Turning Ψ over bed - 500 mm, Turning Ψ over sledge - 290 mm, Longitudinal travel - 850 mm, Cross travel - 260 mm, Spindle speed 3steps - 8-2800 UpM /rpm, Spindle hole - 70 mm, Drive capacity - 25 kW, Weight - 2.650 kg, With control Manual Plus, 3-jaw chuck, Multifix tool holder device, tail stock, coolant device.
 
  510
IDMA20001
MakeMori Seiki
ModelZL35A
YOM1994
ConditionGood Condition
PhotoSee Photo
Max Turning - 382 x 810 mm, Twin Turrets : Tailstock - 68 mm, Bar Capacity, MORIC - D5F Control, 375 mm - 3-Jaw, Swing over bed - 575mm, Swing over Crosslide - 400 mm, Between Centers - 875 mm, X - Turret 1 - 222 mm, Turret 2 - 207 mm, , Z - Turret 1 - 825 mm, Turret 2 - 825 mm, HP 30/40.
 
  511
IDMA19989
MakeGildemeister,Germany
ModelCTX400E
YOM1996
ConditionUnder power
PhotoSee Photo
Working area : Swing – Ψ over guiding way : 570 mm, Swing – Ψ over plan guide : 420 mm, X-axis : 220 mm, Z-axis : 635 mm, Main Spindle
Spindle speed : 25 – 5000 rpm, Spindle motor ( 40% / 100 % ED ) : 28 / 21 kW, Max. torque ( 40% / 100 % ED ) : 320 / 240 Nm, Subspindle
Spindle speed : 25 – 5000 rpm, Spindle motor ( 40% / 100 % ED ) : 12 / 9 kW, Max. torque ( 40% / 100 % ED ) : 96 / 72 Nm, Forward rate
Rapid traverses X – Z – Achse : 20 / 24 m/min, 12 - station turret : with driven tools, EQUIPPED WITH: Subspindle, C – axis (Main- and Subspindle), Preparation for bar loader, Filter aspiration, Chip conveyor.
 
  512
IDMA19948
MakeMazak,Japan
ModelQT15N
YOM1990
ConditionGood Condition
PhotoSee Photo
Turning Dia: 261.6 mm,
Chuck Size: 203.2 mm
X Axis 175 mm,
Z Axis 503 mm,
# Axis: 2
Swing: 439.9 mm,
Centers: 457.2 mm,
Swing On Bed 425 mm,
Swing On Crosslide 250 mm,
Max Machining Length 450 mm,
Max Machining Dia 250 mm,
3-Jaw Chuck 200 mm,
6 Station Turret,
Mazatrol T32-2 Control,
Bar Capacity: 51.1 mm,
Power: 14.9 kW.
Tailstock,
Chip Conveyor.
 
  513
IDMA19947
MakeMazak,Japan
ModelQuickTurn 10
YOM1985
ConditionGood Condition
PhotoSee Photo
Max. rotary Ψ - 440 mm, Max. machining Ψ for shafts - 220 mm, Turning length - 500 mm, X - 150 mm, Z - 530 mm, Spindle speed - 14-3600 Rpm, Rapid feed - 10 m/min., Tailstock programmable - MK 4, Drive capacity - 11/7,5 kW, Weight - 2500 kg.
 
  514
IDMA19935
MakeGemins
ModelGHT4
YOM
ConditionPerfect Condition
PhotoSee Photo
Distance between Centers - 3000 mm, Turning Diameter on Bed - 720 mm, CNC FAGOR 8055.
 
  515
IDMA19909
MakeHaas
Model
YOM2007
ConditionVery good condition
PhotoSee Photo
swing diameter - 762 mm, Turning lenght - 991 mm, feeds - 0 - 18.000 mm/min, rapid feed - 18.000 mm/min, spindle speed - 0 - 3.400 rpm, spindle hole - 88,9 mm, number of tooling - 12, tool taper - VDI 40
tooling speed - 0 - 2.400 rpm, motor power - 28 kW, weight - 7,2 ton, dimension - 3.797 x 3.251 x 1.880 mm, incl. many tools
incl. programmable hydr. tailstock, 1 MB memory capacity more, intern Transformer, 15 Zoll monitor and UBS interface, chip convejor, intern measuring system, screw cutting without compensation chuck, spindle orientle.
 
  516
IDMA19894
MakeDaewoo Puma
Model700
YOM2006
ConditionExcellent condition,under power
PhotoSee Photo
Chuck size - 600 mm, Swing over the bed - 1000 mm, Distance between centers - 1700 mm, Max shaft turning diameter - 787.5, Max chuck turning diameter - 885 mm, X - 462 mm, Z - 1625 mm, Spindle NOSE- A1-15, Spindle motor - 60 HP, Turret configuration - 12 Positions, BAR CAPACITY - 162.5, Spindle Speeds - 3 - 1500 RPM, Machine weight - 33,500 LBS, EQUIPPED WITH: Programmable tailstock, Chip conveyor, Geared headstock.
 
  517
IDMA19380
MakeOkuma,Japan
ModelLB300R
YOM2003
ConditionGood Condition
PhotoSee Photo
turning diameter 370 mm ,
turning length 1000 mm ,
control OSP-U100L,
spindle bore diameter 52 mm ,
number of controlled axis 2 ,
turning speed range 45 -4500 rpm ,
rapid speed 25/20 m/min ,
number of tapers in turret head 12
,
weight of the machine 6 tons
dimensions of the machine 4,76 x 1,90 x 1,93 m
 
  518
IDMA19331
MakeTakisawa,Japan
Model
YOM2002
Conditiongood mechanical condition
PhotoSee Photo
Dia. of workpiece : 350 mm,
length of workpiece : 760 mm,
No. of Spindle : 2,
Dia. above main frame : : 780 mm,
X1 = 265 mm,
X2 = 228 mm,
Z1 = 760 mm,
Z2 = 760 mm,
Distance between spindle : 1130 mm,
Y = 100 mm(+/- 50).
 
  519
IDMA19226
MakeTORNOS DECO SIGMA 8
Model
YOM
ConditionGood Condition
PhotoSee Photo
Controller - GE FANUC 32i, with CE mark.
 
  520
IDMA19128
MakeTraub
ModelTNC65DG
YOM1995
ConditionGood Condition
PhotoSee Photo
Control: TX8F,
Bar capacity:65 mm,
Working hours: 41 000.
with twin spindles and twin turrets.
Complete with IEMCA Magazine Bar Loader and tooling.
 
  521
IDMA19095
MakeDainichi
ModelMG55
YOM
ConditionGood Condition
PhotoSee Photo
CNC SYSTEM - FANUC 15T, SWING - 650 mm, CENTER OF DISTANCE - 2450 mm.
 
  522
IDMA19040
MakeMazak,Japan
ModelSQT250
YOM1999
ConditionGood Condition
PhotoSee Photo
Chuck diameter 250 mm
Max. bar diamater 65 mm
Max. turning length 500 mm
Max. working diamater 300 mm
Spindle speed 35 - 4000 rpm
Spindle motor 15 kW
Subspindle
Y-axis
Parts catcher
Interface for bar loader
Chip conveyor
12 station turret with driven tools
CNC: Mazatrol Fusion 640T
 
  523
IDMA18987
MakeStar
ModelSB16C
YOM2007
ConditionVery good condition
PhotoSee Photo
Max. Turning Dia 16mm, Max. Headstock Stroke 205mm, Max. Drilling Capability dia 10mm, Spindle Speed 10000rpm, Spindle Motor:2.2/3.7KW, Controller FANUC 18i-TB

 
  524
IDMA18985
MakeStar
ModelSB16
YOM2006
ConditionVery good condition
PhotoSee Photo
Max. Turning Dia 16mm, Max. Headstock Stroke 205 mm, Max. Drilling Capability dia 8mm, Spindle Speed10000rpm, Spindle Motor2.2/3.7KW, Controller FANUC 21i-TB

 
  525
IDMA18955
MakeSTAR-JAPAN
ModelSB16
YOM2006
ConditionGood Condition
PhotoSee Photo
Max. Turning Dia.:16mm, Max. Headstock Stroke:205mm, Max. Drilling Capability:φ8mm, Spindle Speed:10000rpm, Spindle Motor:2.2/3.7KW, Controller: FANUC 21i-TB.
 
  526
IDMA18768
MakeMazak,Japan
ModelSQT250MSY
YOM2004
ConditionGood Condition
PhotoSee Photo
Mazatrol Fusion 640T, 12 station turret with driven tools, Chuck diameter -250 mm, Max. bar diamater- 65 mm, Max. turning length 500 mm, Max. working diameter-300 mm, Spindle speed 35 - 4000 rpm, Spindle motor -15 kW, Parts catcher, Interface for bar loader, Chip conveyor.
 
  527
IDMA18726
MakeNakamura Tome,Japan
ModelTW8
YOM1997
ConditionGood Condition
PhotoSee Photo
Max. Turning Dia.:190mm, Max. Cutting Length:115mm, Distance Between Spindle Nose:735mm, X1 150 mm, X2 150 mm, Z1 180 mm, Z2 525 mm, Axis Chuck Size 250 mm, Bar Capacity:26mm, Spindle Speed:60-6000rpm, Spindle Motor:(L) 7.5kW/(R) 7.5kW, Controller:FANUC 18-T, With FEDEK "SN-542" Barfeed
 
  528
IDMA18702
MakeWIA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max swing 750mm
Max workpiece length 720mm
Chuck size 12mm
Main moter RPM 3000
Main moter Power 26/22
Travel(X/Z) 355/750
Rapid Travel 20/24,CNC Syatem: FANUC Oi-TB
 
  529
IDMA18598
MakeHaas
ModelSL20T
YOM2002
ConditionGood Condition
PhotoSee Photo
Chuck Size- 207 mm, 3, Jaw – Hydraulic, Max. Swing: 575 mm, Max. Cutting diameter-257 mm, Shipping info: Spindle Speeds: to 4000 rpm, Length of machine- 3450x2450x2300, Spindle Nose: A2-6, Length of bar feed- 2550x1650x1300, Spindle Thru hole: 50 mm (This is max. bar capacity), Spindle Motor: 20HP Vector Drive, Distance Between Centers: 600 mm, Weight: Approx. 9000 lbs., Bar feed weighs: 1,600 lbs., Turret Stations: 10, Tailstock: Yes, Electrics: 208/230/3/60, Max. amp load = 40 amps.
 
  530
IDMA18597
MakeHaas
ModelSL20T
YOM2003
ConditionGood Condition
PhotoSee Photo
Chuck Size- 207 mm, 3, Jaw – Hydraulic, Max. Swing: 575 mm, Max. Cutting diameter-257 mm, Shipping info: Spindle Speeds: to 4000 rpm, Length of machine- 3450x2450x2300, Spindle Nose: A2-6, Length of bar feed- 2550x1650x1300, Spindle Thru hole: 50 mm (This is max. bar capacity), Spindle Motor: 20HP Vector Drive, Distance Between Centers: 600 mm, Weight: Approx. 9000 lbs., Bar feed weighs: 1,600 lbs., Turret Stations: 10, Tailstock: Yes, Electrics: 208/230/3/60, Max. amp load = 40 amps.
 
  531
IDMA18593
MakeHaas
Model
YOM1999
ConditionGood Condition
PhotoSee Photo
Swing Over Cross Slide – 362 mm, Swing Over Front Apron-750 mm, Chuck Size-250 mm, Maximum Bar Capacity-75 mm, Maximum Cutting Diameter-425 mm, Maximum Cutting Length-850 mm, Maximum Speed -3400 rpm, Draw Tube Bore-75 mm, Spindle Nose-A2-6, Spindle Bore-87 mm, Max Power Rating-30 hp, Max Torque Standard-300 ft-lb @ 700 rpm, Torque w/ Optional Trans-850 ft-lb @ 250 rpm, X -282, Z -850 mm, Max Thrust Rating X-3400 lb, Max Thrust Rating Z-5400 lb, Rapids-710 in/min, Boring Bar Rear Clearance-112 mm, Index Time (one tool)-1 sec, Number of Tools-12, Tool Size (OD turning)-25.
 
  532
IDMA18591
MakeHaas
ModelSL20
YOM1999
ConditionGood Condition
PhotoSee Photo
Swing Over Bed- 575 mm, Swing Over Cross Slide – 237 mm, Maximum Cutting Diameter- 257mm, Distance Between Centers – 600 mm, X-211, Z-500, Rapid Traverse To X and Z Axes -1.200 IPM, Hole Through Spindle-60 mm, Bar Capacity Through Spindle-50 mm, Spindle Nose -A2-6, Spindle Speeds-4,000 RPM (max.), Spindle Drive Motor-30 HP, Tool Turret-10 Positions.
 
  533
IDMA18588
MakeHaas
ModelSL30BB
YOM2008
ConditionGood Condition
PhotoSee Photo
Swing – 750 mm, Turn Diameter – 425 mm, Center Distance – 975 mm, Turret Positions- 10, Spindle Nose- A2-6, Spindle Speed- 2400 RPM, Bar Capacity – 100 mm, Main Motor- 30 HP, Tailstock Programmable, Haas CNC Control, Big Bore Option, Chuck 375 mm, Auto Jet Blast, Parts Catcher, Chip Auger, Spindle Orientation, User Macros, Visual Quick Code, High Intensity Lighting.
 
  534
IDMA18587
MakeHaas
Model
YOM2005
ConditionGood Condition
PhotoSee Photo
Swing – 750 mm, Turn Diameter- 425 mm, Turret Positions- 10, Spindle Nose- A2-6, Spindle Speed- 2400 RPM, Bar Capacity- 75 mm, Main Motor: 30 HP, Tailstock None, Haas CNC Control, Haas Servo 300 Barfeeder, 250 Chuck, Tool Presetter, Chip Auger, Floppy Drive, 1MB, Visual Quick Code, High Intensity Lighting.
 
  535
IDMA18306
MakeGildemeister,Germany
ModelSprint65
YOM1998
Condition
PhotoSee Photo
Spindle bore 79mm,main spindle speed 4500rpm,2nd spindle speed 4000rpm,bar dia. 65mm,parts catcher,bar loader SIGMA for 3m bars,many tool holders,with til stock and chip conveyor,with Control CNC Sinumerik 840C, with 2x8 station turret driven tools.
 
  536
IDMA18137
MakeTsugami,Japan
ModelNF32CIII
YOM1999
ConditionGood Condition
PhotoSee Photo
Bar dia. range 7.75mm to 31.5mm, max. length of stroke 206.7mm,max. drilling dia.(SUS304)18.75mm,max. tapping dia.(SU304)M12,X1 axis front turret 78.75mm+ 59mm,X2 axis rear turret108.45+49mm,Z1 axis headstock 211.5mm,Z2 axis (sub spindl)93,5mm+57mm,rapid traverse rate (X1/XX@/Z1)0.315 IPM,main spindle speeds35-4500RPM,main spindle bore dia.35.425mm,main spindle minimum indexable angle 0.001deg.,main spindle motor 10HP/7.5 HP,main spindle center height 862.5mm,number of turret tool stations 16(8x2),no. rotary tool stations 16(8x2),drill holder hole dia.34.425mm,rotary tool speed(stepless)270-5400RPM,rapid traverse(X1,X2,Z1,Z2 axes315 IPM,sub-spindel max.chucking dia.31.5mm,sub-spindle speeds(stepless)200-3000 RPM,sub spindle motor 2 HP,euipped with Fanuc O-TTC CNC control,(2) 8 stations turrets,C-axis and live milling, 9 turning tools,7 boring tools,2 milling tools,Iemca Boss 542 CNC/37 Magazine bar feed S/N 99010412,Dimension of machine-2050mm x 1625mmx 1575mm,Approx wt. 6.8 tons.
 
  537
IDMA18120
MakeMiyano
ModelLE22B
YOM1994
ConditionGood Condition
PhotoSee Photo
swing over slide 280 mm
travel X / Z 165 / 350 mm
spindle speed max. 4000 rpm
main drive 11 kW
tailstock, turret, barfeeder FMB Turbo 10-65/4200, chip conveyer,
powerchuck diam. 200 incl., control Fanuc O-TC
 
  538
IDMA18063
MakeMazak,Japan
ModelIntegrex400IISY
YOM2003
ConditionGood Condition
PhotoSee Photo
Max. dia.610mm,turning dia.over slide 390mm,X-axis 580mm,Y-axis 230mm,Z-axis 1137mm,C-axis 360 deg.,(0.001 deg x 260,000),rapid traverses X-axis 30,000,Y-axis15,000mm,Z-axis 30,000 mm/min,rapid traverse C-axis 300 rpm,rapid travese B-axis 62.5 rpm,forward feedsX/Y/Z axis 1-2000 mm/min(25 steps)forward feedsC-axis1-2000deg/min (25 steps),main spindle speed 3000rpm,spindle motor 30KW/22Kw(30/min/continuous, sp[indle nose A2-8",spindle bore 88mm,min. spindle indexing 0.001 deg.,milling spindle speed 10,000rpm,motor(20% ED) Ac15kW,capacity of milling spindle deg.100mm,shaftmillung deg. 32mm,boring deg. 30mm,tapping M27,2nd spindle speed 3500rpm,motor 22Kw/15 kW(30 min/continuous) travels 2nd headstock(z axis) 1.110mm,rapid travels 2nd headstock 20,000min/min,min. indexing 2nd spindle 0.001 deg.,one station turret for fixed or driven tools tool shaft height 25mm,bore-shaft deg. 40mm,with tool magazine max. tool deg. 90mm,with empty pockets 120mm,max. toll length 300mm,max. tool weight 10 kg,tool change time(tool-to-tool) 1'3s(tool weight less 7 kg.)with coolant system coolant tank capacoity 390 ltr,coolant pump motor 1 kW,with options on B-axis(0.001 deg.positioning),C-axis,Y-axis, tool eye,40ATC KM 673, synchr. tapping(milling spindle) EIA/SO,also with hydr. 3-jaw chuck-deg 380mm,(main spinddle)Hydr 3-jaw chuck deg. 300mm(2nd spindle),diemnsion of machine 5265mmx2417 x2732mm,wt. of machine 10.1 tons.
 
  539
IDMA17793
MakeOkuma,Japan
ModelACT20
YOM1998
ConditionGood Condition
PhotoSee Photo
swing over bed 500 mm,
distance betw. centres 480 mm,
travel X / Z 300 / 460 mm,
spindle bore 62 mm,
main drive 11 kW,
tailstock, turret 12 places, chip conveyer, control Fanuc 18-T
 
  540
IDMA17786
MakeTornos
ModelDeco2000 20/26
YOM2000
ConditionGood Condition
PhotoSee Photo
10 axes with Robobar.
Controller FANUC-DECO
 
  541
IDMA17771
MakeMazak,Japan
ModelIntegrex50Y x 2500U
YOM1998
ConditionGood Condition
PhotoSee Photo
Maximum cutting diameter & length 700 x 2580 mm,
Maximum swing 700 mm,
Maximum swing over carriage 512.5 mm,
Spindle speed 2 to 2,200 rpm (4 ranges),
Spindle through bore 78.5 mm,
Spindle horsepower 40 hp,
Spindle nose A2-8,
Spindle “C” axis indexing—0.001 degree,
Milling tool spindle speed 18 to 3,000 rpm,
Milling tool spindle taper CAT 50,
Milling tool spindle horsepower 15 hp,
Automatic tool changer—120 tool capacity,
Tailstock quill stroke 127.5 mm,
Tailstock taper—no. 5 Morse,
Y-axis travel 102.5 mm plus or minus,
Electrical—200-220/60/3,

Equipped with—
Chip pan arranged for central coolant system,
375 mm three jaw chuck,
Mazatrol T-Plus with 350 mm color monitor,
Programmable tailstock,
SMW SLU-4 hydraulic steady rest (240 mm capacity),
Automatic tool eye,
Large assortment of static turning tools,
Large assortment of chuck jaws,
Complete manuals,
Miscellaneous spare parts ,


Approximate weight 34,000 pounds,
Approximate floor space 3000 x 6875 x 2875 mm.
 
  542
IDMA17765
MakeMiyano
ModelLZ02
YOM2003
ConditionWorking,lying conserved in shed
PhotoSee Photo
CNC type with driven tools and C-axis.
 
  543
IDMA17749
MakeMazak,Japan
ModelQuickTurn8N
YOM1990
ConditionVery good condition
PhotoSee Photo
3jaw chuck 160 mm,bar diameter 40 mm,X/Z-axis: 100 x 290 mm
Main spindle 6000 min-1,
Main spindle motor 7,5 kW,
parts catcher
Interface bar loader
chip conveyor

control Mazatrol T 32-2



 
  544
IDMA17680
MakeMazak,Japan
ModelQT15N
YOM1990/1991
ConditionGood Condition
PhotoSee Photo
1)Mazatral 32-2,200mm chuck,8 sided tool holder,without tail stock.
2)Mazatral 32-2,200mm chuck,8 sided tool holder, with tail stock.
3)Mazatral 32-2,200mm chuck,8 sided tool holder, without tail stock.(3 nos.)
 
  545
IDMA17658
MakeWarner & Swasey
ModelSC32
YOM1998
ConditionGood Condition
PhotoSee Photo
dia Power-700 mm dia Power, Fanuc 18iT CNC,Turning Dia-800 mm, dia Spindle Bore- 312.5 mm, 5 Station Vertical Turret, Chuck Face to Turret Face Max-1325 mm
 
  546
IDMA17606
MakeWasino,Japan
ModelLJ63M
YOM1986
ConditionExcellent
PhotoSee Photo
chuck size 250 mm, swing over bed 425 mm, nominal workpiece dia 225 mm, distance between centers 600 mm, bar capacity 62.5 mm, spindle nose A2-8 , spindle speeds (2 ranges) 10-3500 RPM , X 237.5 mm, Z 600 mm, turret 12 Positions (6 turnings/6 milling) , spindle motor 25HP, live tooling motor 5/3 HP, live tooling RPMS 35-3000 RPM , equipped with : live tooling , C axis , chip conveyor , tailstock ,FANUC 10T CNC CONTROL WITH CRT
- 2 machines
 
  547
IDMA17573
MakeMori Seiki
ModelSL25B/500
YOM1989
ConditionGood Condition
PhotoSee Photo
CD - 530 mm,
V-10 Turret,
10" Chuck bore diameter 80mm,
Tailstock,
Chip Conveyor.
Control : Fanuc F-15.
Qty : 2 Nos.

 
  548
IDMA17499
MakeOkuma,Japan
ModelLH35N
YOM1990
ConditionGood Condition
PhotoSee Photo
Control : OSP 5000L,
Swing : 760 mm,
Centers : 2000 mm,
Z :2000 mm,
Tool Holder : tool type & 6 tool type,
Machine Weight : 5,600 kgs.
 
  549
IDMA17486
MakeMazak,Japan
ModelQuick Turn 10N
YOM1985
ConditionVery good condition
PhotoSee Photo
Chuck dia 200 mm,
Max. bar diameter 42 mm,
Max. turning length 507 mm,
Max. working diameter 260 mm,
Spindle speed 3600 rpm,
Spindle motor 15 kW,
Tool-eye,
Tail stock,
Chip conveyor,
several equipment,

8-station turret,
control Mazatrol T 2,
 
  550
IDMA17481
MakeGildemeister,Germany
ModelGT50
YOM1995
Condition
PhotoSee Photo
2 turets each with 12 tools with driven tools,control Grundig Elektropilot CNC lathe.
 
  551
IDMA17475
MakeGildemeister,Germany
ModelNEF710
YOM
ConditionVery good condition
PhotoSee Photo
little used + accessories
 
  552
IDMA17460
MakeMori Seiki
ModelTL5B
YOM1985
ConditionVery good condition
PhotoSee Photo
300 mm chuck(hydraulic clamp) , bar capacity (boring) 102 mm, max working dia 450 mm, max working length 1950 mm, 6 stations, Fanuc 11M Control
 
  553
IDMA17421
MakeTraub
ModelTNA480
YOM1992
ConditionGood Condition
PhotoSee Photo
Control : Mitsubishi TX8D.
 
  554
IDMA17420
MakeMazak,Japan
ModelSlant Turn 40 Universal 1500
YOM1984
ConditionGood Condition
PhotoSee Photo
Swing over bed: 533 mm,
Max.turning diameter:343 mm,
Toolchanger: 10atc + 5 on face of turret,
3-jaw chuck: 300 mm,
Between centres:1500 mm,
Spindle bore: 88 mm,
Max.Spindle speed:2200rpm,
Main Motor:30Hp.
 
  555
IDMA17332
MakeDaewoo
ModelPUMA350LA
YOM1999/10
ConditionGood Condition
PhotoSee Photo
Capacity:
Max. swing over bed/carriage 700/480 mm,
Max. turning diameter / length 400/2100 mm,
Max. bar working diameter 90 mm,
Spindle:
Spindle nose ASA 203 mm,
Spindle speed 30/3000 rpm,
Chuck diameter 305 mm,
Spindle motor (cont./30 min.) 18/22 kw,
Travels :
X/Z-axes travel 362/2155 mm,
Tailstock :
Internal taper of tailstock quill C.M. 6,
Quill diameter / travel dia. 120/120 mm,
Turrett :
Tools on turret nr. 12,
Turning 25x25 mm,
boring tool size dia. 50,
Feed :
X/Z axes rapid traverse 16/20 mt/min,
Weight 9800 Kg.
Control unit FANUC 18-TC
Accessories:
Chip conveyor.
Tool presetting.
Programmable tailstock body.
 
  556
IDMA17292
MakeGildemeister,Germany
ModelMD5
YOM1994
ConditionGood Condition
PhotoSee Photo
Turning dia. via bed : 615 mm,
Distance between centers : 2000 mm,
Clamping chuck- Dia. : 200/230 mm,
Mean spindle1:
Spindle bore : 81 mm,
Dia. in the front bearing : 120 mm,
Speeds : 28-4000 U/min,
Tailstock:
Dia. of pinole : 100 mm
Stroke of pinole :120 mm,
Meanspindle 2:
Spindle bore : 73 mm,
Ψ in the front bearing : 100 mm,
Speeds : 35-4000 U/min,
Clamping chuck : 220 mm,
Y axis, slide rigth, stroke : +/- 55
Rapid travers : 10 m/min
Tool carriers:
Universal tool turret : left/rigth 12/12,
Driven tools : left/rigth 6/ 6
Taper of toolholders :
Shaft- Dia. : 40 mm,
Tool shaft crosscut : 25x25 mm,
Control : ELTRO PILOT.
Chip conveyer.
 
  557
IDMA17289
MakeOkuma,Japan
ModelLR10W
YOM1992
ConditionVery good condition
PhotoSee Photo
collet, V8 x 2, Sub spindles, 1 process collet chuck, 2 process 5" 3 jaw chuck. OSP5020L,
 
  558
IDMA17288
MakeOkuma,Japan
ModelLCC15
YOM1994
ConditionVery good condition
PhotoSee Photo
8 Sided turret, tailstock, Riken AD-40E collet chuck, 2 axis,
Worksize 260 x 280 mm, hole through center 62 mm, 35 - 4000 rpm, Stroke X 155, Z 320, OSP500LG,
 
  559
IDMA17287
MakeOkuma,Japan
ModelLB12T
YOM1990
ConditionVery good condition
PhotoSee Photo
chuck 200 mm, 2 Jaw (Kitagawa BT8), 8 Sided turret, 850 mm Swing,
Hole through 56 mm, 65 - 3500 rpm, X105+40, Z870, OSP500L-G.
 
  560
IDMA17286
MakeOkuma,Japan
ModelLB12
YOM1988
ConditionVery good condition
PhotoSee Photo
chuck 200 mm, 3Jaw, 8 Sided turret,OSP500L-G Conversational,
 
  561
IDMA17285
MakeOkuma,Japan
ModelLB9
YOM1991
ConditionVery good condition
PhotoSee Photo
8 Sided turret, collet chuck,OSP500L-G
 
  562
IDMA17284
MakeOkuma,Japan
ModelLB9
YOM1990
ConditionVery good condition
PhotoSee Photo
chuck dia 175 mm, OSP500L-G.
 
  563
IDMA17251
MakeGildemeister,Germany
ModelMF Twin300
YOM1999
ConditionVery good condition
PhotoSee Photo
Max.turning diameter 250 mm, Main and Sub-spindles with C-axis
Max.spindle speed 4000rpm,
Spindle bore 79 mm,Max.distance between spindles 1400 mm,
Twin turrets 2x12atc all live

 
  564
IDMA17242
MakeMazak,Japan
ModelIntegrex30
YOM1995
ConditionGood Condition
PhotoSee Photo
Control : MAZ-TPlus.
Chuck : 254 mm,
3 jaw,
BT40,
ATC-20,
RPM : 3500, 6000
C Axis : 0.001 Indexing,
Hole through : 88 mm,
 
  565
IDMA17230
MakeOkuma,Japan
ModelLH55ND
YOM1989
ConditionGood Condition
PhotoSee Photo
Chuck Dia. : 800 mm,
Swing : 1100 mm,
CD : 2000 mm,
Turret V8,
Steady Rest : 2 Nos.
Control : OSP-5000.
 
  566
IDMA17191
MakeHeyligenstaedt
ModelHeynumat2U/1500
YOM1979
ConditionGood Condition
PhotoSee Photo
730x1500x105,Siemens Control
 
  567
IDMA17151
MakeHwacheon
ModelMega72
YOM2007
ConditionGood Condition
PhotoSee Photo
Max. working dia.: 720mm,
Chuck dia. : 610mm,
Working length : 3000mm,
X axis removal: 390mm,
Z axis removal: 3000mm,
X axis speed: 6000mm/min,
Z axis speed: 6000mm/min,
Bed width: 460mm,
Bed length: 3350mm,
Power: 15kW,
RPM range: 20-1000,
Working capacity: approx. 5ton,
CNC system: SIEMENS 810D.
 
  568
IDMA17142
MakeVDF Boehringer
ModelV800NC
YOM1990
ConditionExcellent
PhotoSee Photo
Center height : 500 mm,
Swing over the bed : 1000 mm,
Over support : 665 mm,
Turning length : 4000 mm,
CNC Control : Phillips B32T.
 
  569
IDMA17141
MakeIkegai,Japan
ModelAX40N
YOM1981
ConditionGood Condition
PhotoSee Photo
Chuck dia : 530 mm, Center height : 480 mm, Cutting Diameter :813 mm, Number of Axes :2, Cutting Length :2972 mm, Bar / Bore :100 mm, Tool Stations :12, Spindles :1, Motor Power :30 kw, Spindle Speed :800 rpm, Control :Fanuc system 6T, No Tailstock.
 
  570
IDMA17132
MakeDoosan
ModelPUMA240mb
YOM2005
ConditionVery good condition
PhotoSee Photo
12 TOOLS
FANUC 18iTB
 
  571
IDMA17130
MakeMiyano
ModelBND20S
YOM1990
ConditionGood Condition
PhotoSee Photo
Bar capacity: 20mm,
Toolchanger: 8atc,
Control: FANUC OT.
Main spindle and sub-spindle,
Complete with FMB 3m Magazine Bar Loader.
 
  572
IDMA17129
MakeDaewoo
ModelPUMA10S
YOM1990
ConditionGood Condition
PhotoSee Photo
3-jaw chuck: 250mm,
Toolchanger: 12atc,
Spindle bore: 64mm,
Between centres: 770mm,
Max.spindle speed: 3150rpm,
Control: FANUC OT.
Complete with swarf conveyor and tailstock.
 
  573
IDMA17127
MakeTakahasi
ModelMicrocellLM5
YOM2000
ConditionWorking
PhotoSee Photo
Max turning dia - dia 250 mm,
Max turning lenght - 150 mm,
Max stroke - x,y,z 220x200x520 mm,
spindle nose type - ASA A2-5,
Hole throught spindle I.D - dia 48,
Spindle bearing I.D - dia 85,
max chuck size - 6 inch hydraulic hollow chuck,
spindle rotation speed - 40 - 4000rpm,
spindle motor - AC spindle motor,
Machine size - 3041x1690x2090 mm,
Machine net weight - 4000 kgs.
Control - Fanuc series 18i - T.
With live tools, Y axis & C axis and additional accessory.
 
  574
IDMA17082
MakeCitizen
ModelCincom L20
YOM1995
ConditionGood Condition
PhotoSee Photo
CNC Sliding Head 20mm Capacity.
Rear Spindle
3 Front End Tool Positions
3 Rear End Tool Positions.
LNS 3 Metre Magazine Bar Feed.
 
  575
IDMA17081
MakeCitizen
ModelCincom L16
YOM1990
ConditionGood Condition
PhotoSee Photo
Sliding Head with 20mm CapacitySpindle
4 Tool Slide
Rear Spindle
2 Driven Tool Positions with a Driven Tool.
Fitted.
2 Position Toolpost at at Rear
3 Position Toolpost at Front.
3 Metre Magazine Bar Feed.
 
  576
IDMA17050
MakeHitachi Seiki,Japan
Model4NEII600
YOM
ConditionGood Condition
PhotoSee Photo
swing over bed 1018.75 mm, machining length 600 mm, X 746.875 mm, Z 612.5 mm, spindle speeds 20-3150 RPM , chuck 250 mm, number of turret positions 12 , spindle hole 37.5 mm, rapid traverse , coolant , tailstock , taper in tailstock , RS232 port , lube system , spindle motor 30HP, Fanuc 6T
 
  577
IDMA16996
MakeColchester
Model4000L
YOM1989
ConditionGood Condition
PhotoSee Photo
Chuck: 300mm, Swing: 550mm, BC: 2000mm, Turret: 8 station Rotary turret, Bore: 90mm, Infinitely adjustable spindle speed ( No manual gear change) Very clean and clear slides.
The overall size of the machine is: Length: 3000mm, Width: 1800mm at the headstock end (including the cnc cabinet) Height: 1600mm.
Control : Fanuc OT.
 
  578
IDMA16951
MakeNakamura
ModelTMC3
YOM1980
ConditionGood Condition
PhotoSee Photo
Chuck size 200 mm,
Swing over bed 560 mm,
Swing over saddle 300mm,
Max. Turning Diameter 240mm,
Max distance between spindle nose and turret face 710mm,
Min distance between spindle nose and turret face 180mm,
Tooling clearance 575mm,
Spindle motor 7.5/11 Kw,
Spindle Speed 4500rpm,
Spindle nose A1 6,
X axis travels 165mm,
Y axis Travels 530mm,
Rapid X axis 7.5m/min,
Rapid Z axis 15m/min,
12 station turret,
Tail stock Quill dia 80mm,
Round collet capacity 42 mm,
Machine Dimensions 2610 X 2205 X 2075 mm,
Machine Weight 4.9 tons,Fanuc 6T control.
 
  579
IDMA16893
MakeMuratec
ModelMS6
YOM1995
ConditionGood Condition
PhotoSee Photo
Fanuc 18T Control
 
  580
IDMA16892
MakeWarner & Swasey
ModelWSE8
YOM
ConditionGood Condition
PhotoSee Photo
200 mm/3 jaw chuck, 12 position turret
 
  581
IDMA16891
MakeOkuma,Japan
ModelLR15
YOM
ConditionGood Condition
PhotoSee Photo
OSP5020L Control
 
  582
IDMA16890
MakeEmco
ModelEmcoturn320
YOM
ConditionGood Condition
PhotoSee Photo
8 Position Turret , OT Control
 
  583
IDMA16889
MakeMiyano
ModelUNC60
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc Control
 
  584
IDMA16845
MakeDoosan
ModelMecatec Z340SM
YOM2007
ConditionGood Condition
PhotoSee Photo
349.75 mm Max Turing Dia, Axis CNC Turning Center, Dual Spindle, Dual Turret
Fanuc 18iTB Control,
 
  585
IDMA16830
MakeBoley
ModelBC42 x2
YOM2001
ConditionGood Condition
PhotoSee Photo
up to bar diameter 42 mm
rev. max. 6000 rpm
2 spindles (incl. counter side), living tools, control Mitsubishi
bar loader FMB turbo
 
  586
IDMA16789
MakeDianichi
ModelMG63
YOM1987
ConditionGood Condition
PhotoSee Photo
Turning Dia: 550mm,
Turning Length: 100mm,
Swing over Bed: 630mm,
Swing over Crossslide: 360mm,
X -axis movement: 320mm,
Chuck Size: 400mm 3 jaw, 500mm 4 jaw,
Turret Stations: 10 station rotary turret,
Spindle Speed: 3- 1800rpm, 3 stages stepless,
Spindle bore: 85mm,
Spindle nose: A-11,
Spindle power: 11/15kW A/C motor,
Control: FANUC 10T with FAPT.
With Swarf Conveyor, Coolant system, steadies x 2, hydraulic tailstock.
 
  587
IDMA16373
MakeChinese
ModelSK50P/1000
YOM
ConditionBrand New
PhotoSee Photo
Max swing over bed diameter 500 mm, Max swing over cross slide diameter 280 mm, Max turning diameter 500 mm, Max work piece length 750/700;1000/950;1500/1450;2000/1950 mm,Max turning length 600/520;850/770;1350/1270;1850/1770 mm, Spindle nose dia 77 bore ISO 702/II D8 Shot cam-lock,dia 77 bore ISO 702/I A 28 (POWER CHUCK),Spindle bore dia 77 mm, Spindle speeds 3 geras stepless 21-1620,H:162-1620 M:66-660 L:21-210 r/min,Max out put of torque 800 N.m,Tail stock quill diameter dia 75(dia80 hydraulic),Tailstock quill taper MT No.5 (MT No.3 hydraulic),Max quill travel 150 (130 hydraulic),tail stock cross movement +/- 15 mm, Number of tool 4 (standard) 6 (optional), Max permisible tool section 25x25 mmxmm, Turret travel X-axis:275/225 (6 station) Z-axis 650/900/1400/1900 mm, Rapid traverse X-axis:6 Z-axis :12 m/min, Lead screw pitch X-axis:5 Z-axis:6 mm, Main motor DP132-47.5 kw freq.inverting motor, Coolant pump AOB-25 120W 25L/min,Drive belt controle systems B1930 4 pieces,CNC system:FANUC OTD;802D;980T;Huanzhong 21T;MATE-0 Fuction:These lathes can perform internal and external cylindrical turning,arbitrary taper turning,facing and treading specially design for complicated and high accuracy workpieces.
 
  588
IDMA16370
MakeChinese
ModelCJK6150H/1000
YOM
ConditionBrand New
PhotoSee Photo
Swing over bed diameter 500 mm, Swing over carriage diameter 280 mm,Max turning diameter 500 mm, Max turning length 1500/2000 mm, Max part length 1280/1780 mm , Spindle bore diameter 52/82/105 mm, Type of spindle nose dia 52 bore:ISO 702/III NO.6 bayonet lock,dia 82,105 bore:ISO 702/II NO.8 cam-lock type.Spindle speed range 21 steps 11-1600,12 steps 36-1600 (dia 105 bore),Spindle motor power 7.5 kw, tailstock quill diameter 75 mm,Tailstock quill travel 150 mm,tailstock quill taper 5 MT, Number of tool stations 4, Tool O.D size 25x25 mm, X-Z axis travel:X:275;Z:650/900/1400/1900 mm, Rapid traverse rate (X/Z)6/12 mpm, Dimension (LXWXH) 2250/2500/3000/3500x1370x1690 mm ,Packing dimension 2550/2800/3300/3800x1920x2200 mm, Machine weight 2100/2150/2200/2260 Kg.
 
  589
IDMA16357
MakeCincinnati,USA
ModelCfe3560
YOM
ConditionBrand New
PhotoSee Photo
CNC Flat Bed Lathe-
Swing Over Bed 880mm,
Swing Over Cross Slide 510mm,
Distance Between Centers 1500mm,
Z-Axis Travel 6500mm,
Bed Width 558 mm,
Spindle Speeds 10 to 800 RPM,
Spindle Nose A2-11,
Spindle Bore 153mm,
X Axis travels 558 mm,
Rapid Traverse X-Axis 10,000kgs,
Rapid Traverse Z-Axis 315 IPM,
Tailstock Quill Dia. 115 mm,
Quill Travel (Manual) 198 mm,
Weight (approx) 22,600 LBS.
Overall Dimensions 3886 x 2717 x 2540 mm,
Features And Equipment:
Fanuc 0iT CNC Controller with Manual Guide-0i and 10.4” LCD Monitor, 40/50 HP Spindle Motor, Electrical Controls, V12 Hydraulic Automatic Turret, 4-Range Spindle Speeds, Automatic Lubrication, Coolant System, Work Light, Tools & Tool Box, Sleeve & 2 Centers, Oil Thermal Controller, Manual Tailstock Movement, Chip Conveyor.
 
  590
IDMA16356
MakeCincinnati,USA
Model31U48
YOM
ConditionBrand New
PhotoSee Photo
Universal Slant Bed CNC Turning Center -
Swing Over Bed 790mm,
Swing Over Cross Slide 640,
Distance Between Centers 1200mm,
Spindle Bore 153mm,
Spindle Nose A2-11,
Spindle Speeds Variable (4-Ranges) 10-700 rpm,
X Axis Travel 430 mm,
Z Axis Travel 5258 mm,
X Axis Rapid Traverse 315 ipm,
Z Axis Rapid Traverse 390 ipm,
Tailstock Taper 6 MT,
Quill Diameter 160mm,
Spindle Motor 40/50 HP,
Machine Dimensions 6640mm x 1980mm x 2195mm,
Weight (approx.) 12900 kgs.
Features And Equipment:
Fanuc 0i-TC with Manual Guide-I and Thread Repair, CNC Controls, 40/50 HP Spindle Motor, Hydraulic System,45 Degree Slant Bed Construction, Hardened and Ground Meehanite Cast Iron Bed, Precision scraped and Turcite-B Coated Slideways, Heavy-Duty 12-Station Turret, Linear Scale Feed Back for X & Z Axis, Programmable Hydraulic Tailstock with Power Off Safety Device, Telescoping Guard on Bed Slideways, Independent Cooling System for Spindle Headstock, Fully Enclosed Splash Guard, Automatic Lubrication to Slideways and Ball Screws, Chip Conveyor with Chip Cart, Coolant System, No. 6 MT Live Center, Halogen Work Light, Leveling Pads with Screws & Nuts, Tool Box with Adjusting Tools, Operation Manual & Parts List.
Extra Cost Equipment:
500mm 3-Jaw power Chuck $29,800.00
Roller Type Steady Rest (8-16”) $ 9,900.00
Roller Type Steady Rest (14-22”) $12,375.00
SMW Self Centering Steady Rests 2-12” $29,970.00
SMW Self Centering Steady Rests 5-18” $49,350.00
50/60 HP $ 9,960.00
C-Axis and Power Turret (Baruffaldi 250TBMA) $64,800.00,
Tool Probe $6,930.00.

 
  591
IDMA16355
MakeCincinnati,USA
Model31U28
YOM
ConditionBrand New
PhotoSee Photo
Universal Slant Bed CNC Turning Center -
Swing Over Bed 790 mm,
Swing Over Cross Slide 640,
Distance Between Centers 700mm,
Spindle Bore 153mm,
Spindle Nose A2-11,
Spindle Speeds Variable (4-Ranges) 10-700 rpm,
X Axis Travel 430 mm,
Z Axis Travel 5258 mm,
X Axis Rapid Traverse 315 ipm,
Z Axis Rapid Traverse 390 ipm,
Tailstock Taper 6 MT,
Quill Diameter 160mm,
Spindle Motor 40/50 HP,
Machine Dimensions 6140mm x 1980mm x 2195mm,
Weight (approx.) 11400 kgs.
Features And Equipment:
Fanuc 0i-TC with Manual Guide-I and Thread Repair, CNC Controls, 40/50 HP Spindle Motor, Hydraulic System,45 Degree Slant Bed Construction, Hardened and Ground Meehanite Cast Iron Bed, Precision scraped and Turcite-B Coated Slideways, Heavy-Duty 12-Station Turret, Linear Scale Feed Back for X & Z Axis, Programmable Hydraulic Tailstock with Power Off Safety Device, Telescoping Guard on Bed Slideways, Independent Cooling System for Spindle Headstock, Fully Enclosed Splash Guard, Automatic Lubrication to Slideways and Ball Screws, Chip Conveyor with Chip Cart, Coolant System, No. 6 MT Live Center, Halogen Work Light, Leveling Pads with Screws & Nuts, Tool Box with Adjusting Tools, Operation Manual & Parts List.
Extra Cost Equipment:
500mm 3-Jaw power Chuck $29,800.00,
Roller Type Steady Rest (8-16”) $ 9,900.00,
Roller Type Steady Rest (14-22”) $12,375.00,
SMW Self Centering Steady Rests 2-12” 29,970.00,
SMW Self Centering Steady Rests 5-18” $49,350.00,
50/60 HP $ 9,960.00,
C-Axis and Power Turret (Baruffaldi 250TBMA) $64,800.00,
Tool Probe $6,930.00.
 
  592
IDMA16353
MakeTaiwan
ModelBNC 2640X
YOM
ConditionBrand New
PhotoSee Photo
Capacity:Swing in gap 890 mm,Swing over bed 650 mm, Swing over cross slide 410 mm, Max turning length (with turret) 1000 mm, bar capacity (hyd chuk cylinder) 69 on 82 mm bore / 91 on 106 mm bore,Gap lngth from spindle nose surface 283 mm, Max work piece weight (with tail stock) 2000 kg, Travel: X-axis 300 mm, Z-axis 1150 mm, Spindle:Spindle range (choice 1) 80-3500(82mm bore)/80-2400(106 mm bore)/100-1480(153mm bore),Speed range (choice 2) 80-2400 (82mm bore)/80-2400(106 mm bore)/100-1480(153mm bore), Suitable chuck size (option) 250/315 mm, Spindle nose A1-8/D1-8(82 mm bore)/D1-8/A1-11 (106 mm bore),Spindle hole diameter 82(std) mm;(106/1530 option),Motor power 11/15(std) KW,Turret option:Number of tool stations 8,Tool allowance 25 mm, Tool shank 40 mm, Indexing time 0.42(BARUFFALDI),Feed rate:X axis rapid traverse 15 for BCD 3M & below/12 for BCD 4M m/min,Z axis rapid traverse 15 m/min, Accuracy:Positioning +/- 0.005,Repeatability 0.005 mm,Slide:Overall bed guide width 405 mm,Cross slide guide width 215 mm, Feed motors:X axis power 9.3 NM, Zaxis power 14.8 (length below 3m),17.3(4m & up) NM, Ball screw:X-axis 32*5-C5,Z axis 45*10-C5 (lenght below 1.5M),50*10-C5(length from 2M),Tail stock :Quill stroke 150 mm, Quill diameter 80(std)/100(opt) mm, Quill inside taper 5 MT, Coolant:Pump capacity 55 L/min,Pump pressure 2.4 Kg/cm2,Tank capacity 150 L,Lubrication: Pump motor 25 W, Pump capacity 130 cc/min,Dimension LxWxH 3190x2225x2050 mm, Weight 3900 Kg.CNC Controller and function:FAGOR 8055TC controller is used on this machine,Standard Function:1)Solid graphic fnction with zoom in and zoom out,Variable pitch threads,Turning and Drilling,Chamfering,Treading(longitudianal on face,Roughing along X and Z,Conversational costomization programming(option),512MB compact flash card,Tool path,Thread repair,Facing,Boring(with added holder),Grooving along X and Z,Pattern repeat,ISO programing.
 
  593
IDMA16351
MakeTaiwan
ModelBNC 2240X
YOM
ConditionBrand New
PhotoSee Photo
Capacity:Swing in gap 790 mm,Swing over bed 550 mm, Swing over cross slide 310 mm, Max turning length (with turret) 1000 mm, bar capacity (hyd chuk cylinder) 69 on 82 mm bore / 91 on 106 mm bore,Gap lngth from spindle nose surface 283 mm, Max work piece weight (with tail stock) 2000 kg, Travel: X-axis 300 mm, Z-axis 1150 mm, Spindle:Spindle range (choice 1) 80-3500(82mm bore)/80-2400(106 mm bore),Speed range (choice 2) 80-2400 (82mm bore)/80-2400(106 mm bore), Suitable chuck size (option) 250/315 mm, Spindle nose A1-8/D1-8(82 mm bore)/D1-8/A1-11 (106 mm bore),Spindle hole diameter 82(std) mm;(106/1530 option),Motor power 11/15(std) KW,Turret option:Number of tool stations 8,Tool allowance 25 mm, Tool shank 40 mm, Indexing time 0.42(BARUFFALDI),Feed rate:X axis rapid traverse 15 for BCD 3M & below/12 for BCD 4M m/min,Z axis rapid traverse 15 m/min, Accuracy:Positioning +/- 0.005,Repeatability 0.005 mm,Slide:Overall bed guide width 405 mm,Cross slide guide width 215 mm, Feed motors:X axis power 9.3 NM, Zaxis power 14.8 (length below 3m),17.3(4m & up) NM, Ball screw:X-axis 32*5-C5,Z axis 45*10-C5 (lenght below 1.5M),50*10-C5(length from 2M),Tail stock :Quill stroke 150 mm, Quill diameter 80(std)/100(opt) mm, Quill inside taper 5 MT, Coolant:Pump capacity 55 L/min,Pump pressure 2.4 Kg/cm2,Tank capacity 150 L,Lubrication: Pump motor 25 W, Pump capacity 130 cc/min,Dimension LxWxH 3190x2225x2050 mm, Weight 3900 Kg.CNC Controller and function:FAGOR 8055TC controller is used on this machine,Standard Function:1)Solid graphic fnction with zoom in and zoom out,Variable pitch threads,Turning and Drilling,Chamfering,Treading(longitudianal on face,Roughing along X and Z,Conversational costomization programming(option),512MB compact flash card,Tool path,Thread repair,Facing,Boring(with added holder),Grooving along X and Z,Pattern repeat,ISO progrming.
 
  594
IDMA16258
MakeCincinnati,USA
ModelCFE45200
YOMBrand New
ConditionBrand New
PhotoSee Photo
Swing Over Bed 1135 mm,
Swing Over Cross Slide 760 mm,
Distance Between Centers 5000 mm,
Bed Width 560 mm,
Spindle Speeds 10 to 700 RPM,
Spindle Nose A2-11,
Spindle Bore 153 mm,
X-Axis Ball Screw Diameter 50mm,
Z-Axis Ball Screw Diameter 80 mm,
Rapid Traverse X-Axis 236 IPM,
Rapid Traverse Z-Axis 315 IPM,
Tailstock Quill 145 mm Diameter,
Weight (approx) 35,500 LBS.
Overall Dimensions 7775 x 2675 x 2500 mm,
, 30 HP Spindle Motor, Electrical Controls, V-12 Hydraulic Servo Turret, 4-Range Spindle Speeds, Rotating Type Quill for Tailstock, Automatic Lubrication, Coolant System, Work Light, Tools & Tool Box, Sleeve & 2 Centers, Oil Thermal Controller, Manual Tailstock Movement, Chip Conveyor, 2 Door Full Enclosure , Fanuc 0iT CNC Controller

 
  595
IDMA16212
MakeCincinnati,USA
ModelCFE45160
YOMBrand New
ConditionBrand New
PhotoSee Photo
Swing Over Bed 1135 mm,
Swing Over Cross Slide 760 mm,
Distance Between Centers 4000 mm,
Bed Width 560 mm
Spindle Speeds 10 to 700 RPM,
Spindle Nose A2-11,
Spindle Bore 153 mm,
X-Axis Ball Screw Diameter 50 mm,
Z-Axis Ball Screw Diameter 80 mm,
Rapid Traverse X-Axis 236 IPM,
Rapid Traverse Z-Axis 315 IPM,
Tailstock Quill 145 mm Diameter
Weight (approx) 28,600 LBS,
Overall Dimensions 6500 x 2675 x 2500 mm, FEATURES AND EQUIPMENT:
Fanuc 0iT CNC Controller, 30 HP Spindle Motor, Electrical Controls, V-12 Hydraulic Servo Turret, 4-Range Spindle Speeds, Rotating Type Quill for Tailstock, Automatic Lubrication, Coolant System, Work Light, Tools & Tool Box, Sleeve & 2 Centers, Oil Thermal Controller, Manual Tailstock Movement, Chip Conveyor, 2 Door Full Enclosure
 
  596
IDMA15527
MakeCincinnati,USA
ModelCobra 20120 Ti
YOMBrand New
ConditionBrand New
PhotoSee Photo
Swing Over Bed 500 mm,
Swing Over Cross Slide 337.5 mm, Swing In Gap 750 mm, Distance Between Centers 3000 mm,
Spindle Speeds (16) 20 to1800 RPM,
Spindle Nose D1-8 (A2-8),
Spindle Bore 153.125 mm,
Rapid Traverse Rate (X/Z) 280 ipm,
Tailstock Quill Taper 5 MT,
Weight 7700 LBS,
Overall Dimensions 4500 x 1100 x 1750 mm.(complete details in attachment). Following accesories are avilable with an extra cost :Roller Type Steady Rest ,
Roller Type Follow Rest ,
10” 3-Jaw Hydraulic Chuck ,
12” 3-Jaw Hydraulic Chuck (instead of scroll chuck),
Hydraulic Tailstock ,
Fully enclosed end guarding ,
Fanuc 0i-TC with Manual Guide-I ,

Grinding Attachment with follows specification . Motor: 1HP,
External Grinding Wheel 203.2mm*19mm*19mm,
Internal Grinding Wheel 25.4mm*9.5mm*6mm.

 
  597
IDMA15316
MakeGildemeister,Germany
ModelCTX410
YOM2008
ConditionNew
PhotoSee Photo
CNC Heindenhain Plus iT, Dia. of workpiece 505, Length of workpiece 635 mm,diam. of rod 65mm, spindel 5.000 RPM.,axis C,
 
  598
IDMA15290
MakeMiyano
ModelBNE46S
YOM1996
ConditionGood Condition
PhotoSee Photo
Bar capacity:46 mm,
Upper Turret: 12atc with 6 live positions,
Lower Turret: 10atc,
Main spindle and Sub-spindle: 5° indexing,
Max.Spindle speed: 4000 rpm,
Spindle motor rating: 7.5/11kW,

Complete with good tooling package (12 live tools),
Complete with FMB TURBO magazine Bar Loader,
Control:FANUC 18T.

 
  599
IDMA14941
MakeWMW Niles ,Germany
ModelDFS1
YOM1993/94
ConditionBrand New
PhotoSee Photo
Turning dia. over bed 360mm,turning length 630mm,Revolver 12 position,with following accessories-Chuck Forkcart 200,Coolent equipment,Chip conveyer,some tools and tail stck is programmable.
 
  600
IDMA14129
MakeChinese
ModelCK6152/1500mm
YOMBrand New
ConditionBrand New
PhotoSee Photo
1. Max. swing over bed 520mm,
Max. swing over carriage Φ300mm
Distance between centers 1500 mm,
Max. length of workpiece 1350mm ,
Spindle through-hole dia 80mm,
2.Spindle:
Taper of spindle front-end hole 86 for metric,
Taper of spindle center Morse No.5 ,
Model of Spindle nose No. C8,
Spindle speed range (four ranges stepless change) 25--2000r/min,
3.Turret:
Size of turret 200mmΧ200mm,
Size of cutter cross section 25mmΧ25mm,
Position number of turret 4 , 6,
Max. allowable cutting force P z 8330N ,
Max. allowable force for longitudinal feed P x 3330N ,
Max. allowable force for cross feed P y 2500N,
4.Tailstock:
Quill diameter 85mm ,
Quill stroke 150mm,
Taper of quill front-end hole Morse No.5,
5. Hydraulic and lubrication system
Device of automatic lubrication MMXL-III ,
Model of gear pump CB-B4,
Rated pressure of gear pump 2.5MPa,
Flow rate of gear pump 4L/min,
Model of gear pump motor AO2-7124-B3,
Working pressure of oil cylinder 1.0-1.5MPa,
Model of vane pump PVF-30-70-11,
Rated pressure of vane pump 7MPa,
Flow rate of vane pump 23L/min,
Model of vane pump motor 2HP4P3,
Working pressure of oil chuck 0-3.5Mpa
6.Cooling system:
Model of cooling pump AOB-25,
Power of cooling motor 90W,
Flow rate of cooling pump 25L/min,
7.Driving system:
Model of main motor (frequency conversion) YVPEJ132M-4,
Main motor power 7.5KW,
The frequency when torque is const 5-50Hz,
The frequency when power is const 50-100Hz
Model of V-belt B2000
Number of V-belt 3 pieces
8.Dimensions : 3800 x 1400 x 1840 mm.
weight 3.5 tons, EQUIPPED: FANUC 0I TC, X/Y AXIS FANUC SERVO MOTORS, DRIVES, SIEMENS (OR SIMILAR) ELECTRICAL SWITCHES, VERTICAL 4 STATION ELECTRICAL TURRET, AUTOMATIC LUBRICATING
 
  601
IDMA14128
MakeChinese
ModelCK6152/1500mm
YOMBrand New
ConditionBrand New
PhotoSee Photo
1. Max. swing over bed 520mm,
Max. swing over carriage Φ300mm
Distance between centers 1500 mm,
Max. length of workpiece 1350mm ,
Spindle through-hole dia 80mm,
2.Spindle:
Taper of spindle front-end hole 86 for metric,
Taper of spindle center Morse No.5 ,
Model of Spindle nose No. C8,
Spindle speed range (four ranges stepless change) 25--2000r/min,
3.Turret:
Size of turret 200mmΧ200mm,
Size of cutter cross section 25mmΧ25mm,
Position number of turret 4 , 6,
Max. allowable cutting force P z 8330N ,
Max. allowable force for longitudinal feed P x 3330N ,
Max. allowable force for cross feed P y 2500N,
4.Tailstock:
Quill diameter 85mm ,
Quill stroke 150mm,
Taper of quill front-end hole Morse No.5,
5. Hydraulic and lubrication system
Device of automatic lubrication MMXL-III ,
Model of gear pump CB-B4,
Rated pressure of gear pump 2.5MPa,
Flow rate of gear pump 4L/min,
Model of gear pump motor AO2-7124-B3,
Working pressure of oil cylinder 1.0-1.5MPa,
Model of vane pump PVF-30-70-11,
Rated pressure of vane pump 7MPa,
Flow rate of vane pump 23L/min,
Model of vane pump motor 2HP4P3,
Working pressure of oil chuck 0-3.5Mpa
6.Cooling system:
Model of cooling pump AOB-25,
Power of cooling motor 90W,
Flow rate of cooling pump 25L/min,
7.Driving system:
Model of main motor (frequency conversion) YVPEJ132M-4,
Main motor power 7.5KW,
The frequency when torque is const 5-50Hz,
The frequency when power is const 50-100Hz
Model of V-belt B2000
Number of V-belt 3 pieces
8.Dimensions : 3800 x 1400 x 1840 mm.
weight 3.5 tons, EQUIPPED: FANUC 0I MATE TC, X/Y AXIS FANUC SERVO MOTORS, DRIVES, SIEMENS (OR SIMILAR) ELECTRICAL SWITCHES, VERTICLE 4 STATION ELECTRICAL TURRET, AUTOMATIC LUBRICATING

 
  602
IDMA13874
MakeChinese
ModelDL32M
YOMBrand new
ConditionBrand New
PhotoSee Photo
680 x 2000 mm , Swing over bed 680 mm,
Max turning length 1000 mm,
Max.turning diameter(Shafts) 400 mm,
Max.turning diameter(Discs) 630 mm,
Guideway type box-type,
Chuck size 375 mm , Spindle nose ISO A2-11 ,
Spindle speed 20-2000 RPM ,
Mainspindle motor power(S6)(kW) 22(30),
Spindle bore diameter 100 mm,
Max bar diameter 84 mm,
X-axis travel 375 mm,
Z-axis travel 1030/2030 mm,
X-axis rapid traveres 13 m/min,
Z-axis rapid traveres 13 m/min,
Turret:number of stations 12,
Tool size 32Χ25 mm,
Tailstock quill diameter 160 mm,
Tailstock quill travel 180 mm,
Tailstock taperMT5 , Machine size:LΧWΧH 5740/6740Χ2040Χ2240 mm,
Net weight 11000/13000 kg ,
CNC Type FANUC 0i-TC
 
  603
IDMA13873
MakeChinese
ModelDL32M
YOMBrand new
ConditionBrand New
PhotoSee Photo
680 x 1500 mm , Swing over bed 680 mm,
Max turning length 1000 mm,
Max.turning diameter(Shafts) 400 mm,
Max.turning diameter(Discs) 630 mm,
Guideway type box-type,
Chuck size 375 mm , Spindle nose ISO A2-11 ,
Spindle speed 20-2000 RPM ,
Mainspindle motor power(S6)(kW) 22(30),
Spindle bore diameter 100 mm,
Max bar diameter 84 mm,
X-axis travel 375 mm,
Z-axis travel 1030/2030 mm,
X-axis rapid traveres 13 m/min,
Z-axis rapid traveres 13 m/min,
Turret:number of stations 12,
Tool size 32Χ25 mm,
Tailstock quill diameter 160 mm,
Tailstock quill travel 180 mm,
Tailstock taperMT5 , Machine size:LΧWΧH 5740/6740Χ2040Χ2240 mm,
Net weight 11000/13000 kg ,
CNC Type FANUC 0i-TC
 
  604
IDMA13872
MakeChinese
ModelDL32M
YOMBrand new
ConditionBrand New
PhotoSee Photo
680 x 1000 mm , Swing over bed 680 mm,
Max turning length 1000 mm,
Max.turning diameter(Shafts) 400 mm,
Max.turning diameter(Discs) 630 mm,
Guideway type box-type,
Chuck size 375 mm , Spindle nose ISO A2-11 ,
Spindle speed 20-2000 RPM ,
Mainspindle motor power(S6)(kW) 22(30),
Spindle bore diameter 100 mm,
Max bar diameter 84 mm,
X-axis travel 375 mm,
Z-axis travel 1030/2030 mm,
X-axis rapid traveres 13 m/min,
Z-axis rapid traveres 13 m/min,
Turret:number of stations 12,
Tool size 32Χ25 mm,
Tailstock quill diameter 160 mm,
Tailstock quill travel 180 mm,
Tailstock taperMT5 , Machine size:LΧWΧH 5740/6740Χ2040Χ2240 mm,
Net weight 11000/13000 kg ,
CNC Type FANUC 0i-TC
 
  605
IDMA10642
MakeChinese
ModelCAK3675v
YOM
ConditionBrand New
PhotoSee Photo
Max. Swing over bed 360mm,Max. Swing over slide 180mm,Max. turning length 580mm,Spindle bore dia 53mm,Main Motor 5.5 kW,Spindle Speed 200-3000RPM,Diameter of tailstock quill 60mm,Travel of tailstock quill 140mm,Taper of Tailstock Morse No 4,No of tool stations 4,Work Accuracy IT6-IT7,Overall Dimensions (LxWxH) 2180 x 1230 x 1700mm,Weight 2010 kg,Fanuc Oi-mate CNC Control System
 
  606
IDMA10565
MakeChinese
ModelCKB360
YOM
ConditionBrand New
PhotoSee Photo
360 x 750 mm , (Option of Siemens 802C or Fanuc OI Mate TC)
top