Category : Turning Machines

Sub-Category : Lathe Engine

Total Machines Found : 13

Select | Machine Details
 
  1
IDMA34299
Make
ModelSNA560x2000
YOM
ConditionGood Condition
PhotoSee Photo
Max rpm: 1000 / min
380V, 50Hz, 35A,
maximum working length of pieces: 2000mm
Internal number: 47 (30517)
Lot must be disassembled in a professional manner and
Lot must be disconnected from the first socket,
Dimensions: 4000 x 1200 x H 1400
Weight class: more than 1,000kg
 
  2
IDMA32820
MakeTOS
ModelSUS63
YOM
ConditionGood Condition
PhotoSee Photo
Swing over bed - 630mm
Swing over support - 400mm
Center distance - 3200mm
 
  3
IDMA32500
MakeSaro
ModelSNA1000x6000
YOM1979/Revised 2019
ConditionGood Condition
PhotoSee Photo  |  See Video
Max. work piece diameter, mm 1020
Max. work piece diameter in the gap, mm 1250
Max. work piece diameter above support, mm 620
Max. work piece length, mm 6000 mm
Centre height, mm 510
Max. turning diameter in gap, mm 1250
Spindle bore, mm 105
Turning speed range, rpm 8...1250
Feeds, mm/U:
- longitudinal 0,056...10
- cross 0,0186...3,33
Threading:
Metric, mm 1...176
Inch, (thread/inch) 1/32...10
Module, module 0,5...80
Tail-stock quill diameter, mm 100
Tail-stock quill stroke, mm 300
Tail-stock taper MT 6
Max. work piece weight between centers, kg 2500
Max. work piece weight in steadies, kg 3500
Total power requirement, kW 22,7
Machine dimensions, mm 8250 x 1750 x 1830
Machine weight, kg 9300
 
  4
IDMA30498
MakeSaro
Model
YOM
Condition
PhotoSee Photo
SARO - SNA1000X4000 refurbished
1 000 x 4 000 mm
over guideways: 1000mm
- over long cross slide 620mm
- centre height : 500mm
Distance between centres : 4000mm
Max. weight of workpiece:
- between centres without rest 2500kg
- between centres with rest in the steady rest: 3500kg
- in the face plate: 800kg
Spindle bore 105mm
Speed range 8 - 1250 rpm
Dia. of the quill 100mm
Travel of the quill 300mm
Main motor: 22 KW (1000rpm)
Machine weight: 7000kg

The machine is equipped with:
- 4 jaw faceplate;
- 3 jaw chuck;
- live center
- 1 steady rest
 
  5
IDMA19185
MakeWMW Niles ,Germany
ModelDPS
YOM1968
ConditionGood Condition
PhotoSee Photo
Faceplate diameter: 1250 mm,
Max working diameter:
-Over bed: 1400 mm,
-Over support: 1100 mm,
Center height over bed: 710 mm,
Distance between centers: 1600 mm,
Max workpiece weight: 8000 kg,
Overal dimension: 5860x2210x1920 mm,
Weigth: 14295 kg.
 
  6
IDMA19042
MakeSHANKS
Model
YOM
ConditionGood Condition
PhotoSee Photo
Swing over Bed Ways - 1650 mm, Swing over carriage - 1150 mm, Center to Center - 18000, Speeds - 1.2 - 46, EQUIPPED WITH: Lead Screw & hread Dial, (2) Steady Rests, Face Plate - 1500, 40/50 HP Variable Speed Motor & Controls.
 
  7
IDMA18813
MakeKramatorsk
Model1A667
YOM1974
ConditionGood condition,under power
PhotoSee Photo
Faceplate dia - 2500 mm, Work dia over bed - 2500 mm, over support - 2000 mm, Work weight - 63 Ton, Distance between centers - 12000 mm, Weight of machine - 100 Ton, 2 close and 1 open lunettes, 1 support.
 
  8
IDMA17641
MakeWMW Niles ,Germany
ModelDP2/S2
YOM
ConditionVery good condition
PhotoSee Photo
Faceplate diameter: 2000 mm
Max. working diameter: 2480 mm
Distance between centers: 4000 mm
Max. workpiece weight: 16000 kg
2 lunettes, 1 cutting support
 
  9
IDMA16728
MakeCincinnati Machines
ModelAnaconda 50240
YOM
ConditionBrand New
PhotoSee Photo
Swing Over Bed 1275 mm,
Swing Over Carriage 1010 mm,
Swing In Gap1740 mm,
Distance Between Centers 6000 mm,
Spindle Speeds (18)7 to 700 RPM,
Spindle Nose A2-11,
Spindle Bore 153 mm,
Longitudinal Carriage Feeds .0018 to .1 IPR,
Cross Slide Cross Feeds .0009 to .05 IPR,
Thread Changes English (60) .5 to 28 TPI,
Thread Changes Metric (60) 1 to 56 mm,
Tailstock Quill Taper 6 MT,
Tailstock Quill Diameter 115 mm,
Machine Dimensions L x W 8190x1800 mm,
Machine Weight (approx) 15,700 kgs.
Features and equipment:
30 HP Motor, Electrical Controls, 153 mm Spindle Bore, A2-11 Spindle Nose, Single Piece Bed Casting With Hardened & Ground Ways, Electromagnetic Brake, Hardened & Ground Alloy Steel Headstock Gears and Shafts, Hardened & Ground Cross Slide Ways, Automatic Lubrication To the Ways and Lead Screws, One Piece Stainless Steel Lead Screw Cover, 6 Way Power Feed & Rapid Traverse, Universal Gear Box with Safety Clutch, 2 Speed Tailstock Quill, 205 mm Square 4 Way Auto Tool Post, Thread Chasing Dial, Coolant System, 2 Centers, Work Light, Tool Box & Tools, Operation Manual With Parts Drawings.
Extra Cost Equipment
230 Mm Spindle Bore (6-480 Rpm) $14,850.00
4 Jaw Independent Chuck (25) $3,250.00
4 Jaw Independent Chuck (32) $6,350.00
4 Jaw Independent Chuck (40) $7,550.00
3 Jaw Scroll Chuck (25) $4,800.00
Digital Readout For 2-Axis $4,550.00
Hydraulic Tracer Attachment $19,980.00
Semi-Auto Threading/Turning $18,860.00
 
  10
IDMA16727
MakeCincinnati Machines
ModelCobra18x80
YOM
ConditionBrand New
PhotoSee Photo
Swing Over Bed 4572 mm,
Swing Over Cross Slide 292 mm,
Swing In Gap 711 mm,
Distance Between Centers 2032 mm,
Spindle Speeds (16) 20 to1600 RPM,
Spindle Nose D1-8 Camlock,
Spindle Bore 79 mm,
Longitudinal Carriage Feeds .0015 to .04 IPR ,
Cross Slide Cross Feeds .0008 to .02 IPR,
Thread Changes English (45) 2 to 72 TPI,
Thread Changes Metric (39 .4 to 14 mm,
Tailstock Quill Taper 5 MT,
Weight 4400 LBS,
Overall Dimensions 3048 x 1118 x 168 mm.
Features and equipment:
10 HP Spindle Motor, Electrical Controls, "Matrix" Multi-Plate Clutch For Spindle Engaging & Reversal, Induction Hardened & Ground Bed Ways, Hardened & Ground Spindles & Gears in the Headstock, One Shot Lube, Adjustable Feed Rod Overload Clutch, Inch or Metric Dials, Totally Enclosed Universal Gear Box, Foot Brake, Pull Out Chip Drawer, 4 Way Tool Post, Back Plate, Service Tools, Instruction & Parts Manual.
Extra Cost Equipment:
12 SC Type 3-Jaw Scroll Chuck $ 1280.00
12 SK Type Heavy Duty 3-Jaw Scroll Chuck $ 1390.00
16 Direct Mounted 4-Jaw Independent Chuck w/backplate $ 1020.00
16 Direct Mounted 4-Jaw Independent Chuck $ 1295.00
Backplate for Chuck $ 160.00
17 Faceplate $ 288.00
24 Faceplate $ 490.00
Steady Rest 18 (.8 To 7 Capacity) $ 490.00
Roller Steady Rest (3.5 To 9.4 Capacity) 20 & 22 Only $ 575.00
Follow Rest 18 (1.3 To 6 Capacity) $ 520.00
Rotating Center #5 MT $ 380.00
Full Length Rear Splash Guard for 40 Center Machines $ 4260.00
Full Length Rear Splash Guard for 60 Center Machines $ 500.00
Full Length Rear Splash Guard for 80 Center Machines $ 560.00
Full Length Rear Splash Guard for 120 Center Machines $ 660.00
Halogen Lamp $ 360.00
Chuck Safety Guard with Switch $ 540.00
Full Length Sliding Chip Safety Guard for 40 Center Machines $ 770.00
Full Length Sliding Chip Safety Guard for 60 Center Machines $ 850.00
Full Length Sliding Chip Safety Guard for 80 Center Machines $ 920.00
Full Length Sliding Chip Safety Guard for 120 Center Machines $ 990.00
One Piece Stainless Cover on Leadscrew $ 650.00
Rapid Traverse for Z Axis $ 3.395.00
Turret Type Micrometer Carriage Stop $ 290.00
Taper Turning Attachment $ 1,390.00
Dual Inch/Metric Dials on Cross & Compound Slide $ 380.00
Quick Change Toolpost with 4 Toolholders $ 980.00
Optional 12.5HP Spindle Motor $ 190.00
Magnetic Brake instead of Foot Brake $ 1,585.00

 
  11
IDMA16726
MakeCincinnati Machines
ModelCobra18x60
YOM
ConditionBrand New
PhotoSee Photo
Swing Over Bed 4572 mm,
Swing Over Cross Slide 292 mm,
Swing In Gap 711 mm,
Distance Between Centers 1524 mm,
Spindle Speeds (16) 20 to1600 RPM,
Spindle Nose D1-8 Camlock,
Spindle Bore 79 mm,
Longitudinal Carriage Feeds .0015 to .04 IPR ,
Cross Slide Cross Feeds .0008 to .02 IPR,
Thread Changes English (45) 2 to 72 TPI,
Thread Changes Metric (39 .4 to 14 mm,
Tailstock Quill Taper 5 MT,
Weight 4400 LBS,
Overall Dimensions 3048 x 1118 x 168 mm.
Features and equipment:
10 HP Spindle Motor, Electrical Controls, "Matrix" Multi-Plate Clutch For Spindle Engaging & Reversal, Induction Hardened & Ground Bed Ways, Hardened & Ground Spindles & Gears in the Headstock, One Shot Lube, Adjustable Feed Rod Overload Clutch, Inch or Metric Dials, Totally Enclosed Universal Gear Box, Foot Brake, Pull Out Chip Drawer, 4 Way Tool Post, Back Plate, Service Tools, Instruction & Parts Manual.
Extra Cost Equipment:
12 SC Type 3-Jaw Scroll Chuck $ 1280.00
12 SK Type Heavy Duty 3-Jaw Scroll Chuck $ 1390.00
16 Direct Mounted 4-Jaw Independent Chuck w/backplate $ 1020.00
16 Direct Mounted 4-Jaw Independent Chuck $ 1295.00
Backplate for Chuck $ 160.00
17 Faceplate $ 288.00
24 Faceplate $ 490.00
Steady Rest 18 (.8 To 7 Capacity) $ 490.00
Roller Steady Rest (3.5 To 9.4 Capacity) 20 & 22 Only $ 575.00
Follow Rest 18 (1.3 To 6 Capacity) $ 520.00
Rotating Center #5 MT $ 380.00
Full Length Rear Splash Guard for 40 Center Machines $ 4260.00
Full Length Rear Splash Guard for 60 Center Machines $ 500.00
Full Length Rear Splash Guard for 80 Center Machines $ 560.00
Full Length Rear Splash Guard for 120 Center Machines $ 660.00
Halogen Lamp $ 360.00
Chuck Safety Guard with Switch $ 540.00
Full Length Sliding Chip Safety Guard for 40 Center Machines $ 770.00
Full Length Sliding Chip Safety Guard for 60 Center Machines $ 850.00
Full Length Sliding Chip Safety Guard for 80 Center Machines $ 920.00
Full Length Sliding Chip Safety Guard for 120 Center Machines $ 990.00
One Piece Stainless Cover on Leadscrew $ 650.00
Rapid Traverse for Z Axis $ 3.395.00
Turret Type Micrometer Carriage Stop $ 290.00
Taper Turning Attachment $ 1,390.00
Dual Inch/Metric Dials on Cross & Compound Slide $ 380.00
Quick Change Toolpost with 4 Toolholders $ 980.00
Optional 12.5HP Spindle Motor $ 190.00
Magnetic Brake instead of Foot Brake $ 1,585.00

 
  12
IDMA16725
MakeCincinnati Machines
ModelCobra15x50
YOM
ConditionBrand New
PhotoSee Photo
Swing Over Bed 387.35 mm,
Swing Over Cross Slide 241 mm,
Swing In Gap 610 mm,
Distance Between Centers 1270 mm,
Spindle Speeds (16) 25 to 2000 RPM,
Spindle Nose D1-6 Camlock,
Spindle Bore 54 mm,
Longitudinal Carriage Feeds .0015 to .04 IPR,
Cross Slide Cross Feeds .00075 to .02 IPR,
Thread Changes English (45) 2 to 72 TPI,
Thread Changes Metric (39).2 to 14 mm,
Tailstock Quill Taper 4 MT,
Weight 2860 LBS,
Overall Dimensions 2515 x 1067 x 1473 mm.
Features and equipment:
7 1/2 HP Motor, Electrical Controls, Induction Hardened & Ground Bed Ways, Hardened & Ground Spindles & Gears in the Headstock, One Shot Lube, Feed Rod Overload Clutch, Inch or Metric Dials, Totally Enclosed Universal Gear Box, Foot Brake, Pull Out Chip Drawer, 4 Way Tool Post, Back Plate, Service Tools, Parts & Instruction Manual.
Extra Cost Equipment:
9 SC Type 3-Jaw Scroll Chuck $ 530.00
9 SK Type Heavy Duty 3-Jaw Scroll Chuck $ 670.00
10 4-Jaw Independent Chuck with Backplate $ 490.00
Backplate for Chuck $ 130.00
14 Faceplate $ 170.00
Steady Rest (4-1/2 Capacity) $ 240.00
Follow Rest (4-1/2 Capacity) $ 170.00
Roller fingers for 4-1/2 Capacity Steady Rest or Follow Rest $ 60.00
Rotating Center #4 MT $ 90.00
Full Length Splash Guard $ 240.00
Coolant System $ 170.00
Halogen Lamp $ 190.00
Chuck Safety Guard with Switch $ 330.00
Full Length Sliding Chip Safety Guard $ 660.00
Electrical System $ 990.00
Telescoping Cover on Leadscrew $ 660.00
Turret Type Micrometer Bed Stop $ 260.00
5C Collet Attachment $ 460.00
5C Collet Set (23 piece) $1,040.00
Taper Turning Attachment $ 990.00
Hydraulic Copying Attachment $7,920.00
Dual inch/metric Dials on Cross & Compound Slide $60.00
Quick Change Toolpost with 4 Toolholders $ 510.00
Main Spindle Clutch System $1,710.00
 
  13
IDMA16697
MakeWMW Niles ,Germany
Model
YOM
Condition
PhotoSee Photo
Swing 1000mm,between center 5500mm,clutch mechanism needs repair
top