Category : Turning Machines

Sub-Category : Lathe Vertical Turning CNC

Total Machines Found : 366

Select | Machine Details
 
  1
IDMI7861
Make
Model
YOMFully Retrofited in 2021
ConditionGood Condition
PhotoSee Photo  |  See Video
800x1000x600 height
With atc without atc
CNC VTL for retrofit by old imported vtl body
Ram type new ball screw and LM 800 mm new 4 jows dog chuck with 6 tool atc BT 40 with out atc simple tool post body cabinet
Running with trial
 
  2
IDMI7860
MakeGiddings & Lewis
Model
YOM
ConditionGood Condition
PhotoSee Photo
Fanuc 18t control
1225 mm Chuck
1525mm swing
ISO 60 spindle
12 station ATC
 
  3
IDMA34961
MakeHardinge
ModelVT200
YOM2000
ConditionGood Condition
PhotoSee Photo  |  See Video
FEATURES:
FANUC 16-T CNC CONTROL
400 MM CHUCK
12-POSITION TURRET
LIVE MILLING
PART PROBE
CHIP CONVEYOR
SPECIFICATIONS:
TABLE DIAMETER 400 MM
MAXIMUM SWING 648 MM
MAXIMUM TURNING HEIGHT 498 MM
Z-AXIS TRAVEL 505 MM
RAPID TRAVERSE, X-AXIS 472 IPM
RAPID TRAVERSE, Z-AXIS 630 IPM
LIVE SPINDLE SPEEDS 3-3000 RPM
LIVE SPINDLE MOTOR 7.5 HP
SPINDLE NOSE A2-11
TABLE MOTOR 30 HP
EQUIPPED WITH:
FANUC 16-T CNC CONTROL
400 MM 3-JAW POWERHOLD/GAMET CHUCK
12-STATION TURRET
RENISHAW LP2 PART PROBE
PROVISION FOR TOOL PROBE
COOLJET COOLANT SYSTEM
CHIP CONVEYOR
 
  4
IDMA34888
MakeFemco
ModelVL25
YOM2009
ConditionGood Condition
PhotoSee Photo
FEATURES:
FANUC OITC CNC CONTROL
RAM WITH 8-STATION AUTOMATIC TOOL CHANGER
MISC. TOOLING
CAPACITIES:
TABLE DIAMETER
2700 MM
MAXIMUM TURNING DIAMETER
3000 MM
MAXIMUM CUTTING HEIGHT
1800 MM
X-AXIS TRAVEL
1650 MM
Z-AXIS TRAVEL
1150 MM
TRAVEL OF CROSS RAIL
1500 MM
TABLE SPEEDS,
1.6-160 RPM
TABLE LOAD CAPACITY
44,062 LBS.
MAIN MOTOR
49 HP/ 45 KW
EQUIPPED WITH:
FANUC OITC CNC CONTROL
RAM W/ 8-POSITION AUTOMATIC TOOL CHANGER
DUAL CHIP CONVEYORS
MISC. TOOLING
49 HP/ 45 KW TABLE DRIVE MOTOR
 
  5
IDMI7826
MakeSchiess,German
Model16DS125
YOM1987
ConditionGood Condition
PhotoSee Photo
Control – Seimens 840 DSL (New in 2014)
Chuck size– 1250 mm
Swing – 1600 mm
Height – 1000 mm
ATC – 12 stations
 
  6
IDMI7820
MakeTongtai
ModelTNC 120V
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size ; 1000mm
Max swing mm.1600mm
Turning height mm.1000Mm
Hydraulic Chuck
cnc FANUC O T
Chip conveyor, books , complete trial
 
  7
IDMA34862
MakeTornos
ModelSwiss ST-26
YOM2013
ConditionGood Condition
PhotoSee Photo
9 CONTROLLABLE AXES (X1,Z1,Y1,X2,Y2,C1,X4(XB),Z4,C4)
LEAST INPUT INCREMENT 0.001 MM
INTERPOLATION METHOD LINEAR / CIRCULAR
RAPID TRAVERSE RATE 35 M / MIN Y1, Y2; 30 M / MIN Z1, X4, Z4; 20 M / MIN X1, X2
CUTTING FEEDRATE 1 TO 6,000 MM / MIN
FEEDRATE OVERRIDE 0 TO 150%, 10% STEP
AMOUNT OF TOOL OFFSET 6 DIGITS
MAIN SPINDLE (HEADSTOCK) (Z1 / S1 / C1)
NUMBER OF TOOL OFFSET 99
LCD/MDI 10.4" COLOR LCD
PART PROGRAM STORAGE SIZE 64 KBYTE
TOOL PLATEN (X1 / Y1 / S2) (X2 / Y2)
NUMBER OF TOOL POSITIONS 17 (MAIN OPERATIONS)
CROSS SECTION OF THE TURNING TOOLS 12 X 12 MM
NUMBER OF POSITIONS 5 (FOR ROTATING TOOLS)
MAX RPM OF THE ROTATING TOOLS 6,000 RPM
EAR AXIS + (2) C-AXIS 2- INDEPENDENT TOOL SYSTEMS 36-TOOL POSITIONS 16-POSITIONS FOR ROTATING TOOLS LNS MODEL ALPHA 320 AUTOMATIC BAR LOADER FANUC SERIES 31I-B CNC CONTROL ROTATING GUIDE BUSHING S1 MOTORISATION FOR ROTATING TOOLS ON THE FRONT TOOL PLATEN S2 MOTORISATION FOR ROTATING TOOLS ON THE REAR TOOL PLATEN S4 MOTORISATION FOR THE ROTATING TOOLS IN COUNTER OPERATIONS AXES C1 + C4 PNEUMATIC PART EJECTOR + CLEANING OF THE COUNTER SPINDLE COLLET WITH COOLANT CENTRAL LUBRICATION SYSTEM 3 COLORS LIGHT TOWER COOLANT PUMP WITH SELF CLEANING FILTER HIGH PRESSURE PUMP 20 BARS – 20 L / MIN TIMER TO PRE-HEAT THE COOLANT

MACHINE DESCRIPTION
This Tornos Swiss Lathe features 7 Linear Axis + (2) C-Axis, 2 independent tool systems, and 36 tool positions. This CNC Machine comes with 8 positions for rotating tools, a 6,000 RPM rotating tool speed, a 10,000 RPM Spindle Speed, and Fanuc Series 31iB Controls. This CNC Machine was new in 2013. For more information please call us at 312.226.4150.
COUNTER SPINDLE (X4 / Z4 / S4 / C4)
SPINDLE SPEED 0 - 10 000 RPM
MAX BAR CAPACITY 23MM (25.4")
STANDARD PART LENGTH WITH A ROTATING GUIDE BUSHING MM 220MM
SPINDLE STOP/ START TIME FROM 0 TO 10 000 RPM 0.9 SEC
MAIN SPINDLE OUTPUT 9.5 KW (11)
MAX CONSTANT TORQUE NM 17
MAXIMUM NUMBER OF TOOLS 36
COOLANT TANK CAPACITY 185 LITERS
POWER OF THE COOLANT PUMP 400 W
MAX PRESSURE 3 BARS
MAX OUTPUT 80 L/MIN (COOLANT PUMP
 
  8
IDMA34857
MakeSchiess,German
Model
YOMRetrofitted in 2013
ConditionGood Condition
PhotoSee Photo  |  See Video
Control : Siemens 840 D
Table :
Diameter : 3700 mm
Speeds : 0.32-40 rpm
Max. Load 30 tons
Max. Turning dia: 4000 mm
Turning height : 2700 mm
Ram stroke : 1500 mm
Machine weight: ca. 80 tons
 
  9
IDMA34738
MakeFarrel
ModelFixed Rail
YOM2010
ConditionGood Condition
PhotoSee Photo
FEATURES:
REBUILT & RETROFITTED 2010 WITH GE FANUC O-M CNC CONTROL
EXTENDED RAM TRAVEL
2-VERTICAL RAMS
125 TON TABLE CAPACITY
FLUSH FLOOR, NO PIT REQUIRED
CAPACITY:
TABLE DIAMETER
4877 MM
MAXIMUM SWING
5131 MM
MAXIMUM HEIGHT UNDER RAIL
2794 MM
MAXIMUM HEIGHT UNDER TOOL
2616 MM
RAM STROKE
2438 MM
RAM CROSS SECTION
241 MM X 254 MM
FEED RATE
10009 MM/MIN
FEED RATE PER ROTATION
0 MM-500 MM
RAPID TRAVERSE RATE
4000 MM/MIN
TABLE SPEEDS
.5-35 RPM
RAM TOOLING
SANDVIK C-6
TABLE WEIGHT CAPACITY
125 TON
MAIN MOTOR
75 KW
EQUIPPED WITH:
GE FANUC O-M CNC CONTROL, NEW 2010
2-VERTICAL RAM HEADS
EXTENDED RAM TRAVELS
ADJUSTABLE FIXED CROSS RAIL
HYDROSTATIC TABLE BEARINGS, REBUILT 2010
HARDENED & GROUND WAYS
FLOOD COOLANT
BELLOW TYPE WAY COVERS ON CROSS RAIL
CHIP CONVEYOR
75 KW MAIN MOTOR
NOTES:
REBUILT & RETROFITTED WITH NEW CNC CONTROLS IN 2010.
FLUSH MOUNT MACHINE DOES NOT REQUIRE A PIT.
 
  10
IDMA34737
MakeFarrel
ModelDouble Column
YOM1992
ConditionGood Condition
PhotoSee Photo
FEATURES:
G & L 8000B CNC CONTROL
REBUILT & RETROFIT IN 1992
2-VERTICAL RAMS
200 TON TABLE CAPACITY
CAPACITY:
TABLE DIAMETER
4877 MM
MAXIMUM SWING
6401 MM
MAXIMUM HEIGHT UNDER RAIL
3658 MM
RAM STROKE
1464 MM
RAM CROSS SECTION
330 MM X 330 MM
TABLE SPEEDS
.5-48 RPM
TABLE WEIGHT CAPACITY
200 TON
RAM & SADDLE FEEDS
.001-999 IPR
MAIN MOTOR
75 KW
APPROXIMATE WEIGHT
158757 KG
EQUIPPED WITH:
G & L 8000B CNC CONTROL RETROFIT IN 1992
2-VERTICAL RAMS
SPINDLE CHILLER
BELLOW STYLE WAY COVERS
75 KW MAIN MOTOR
200 TON TABLE WEIGHT CAPACITY
NOTES:
INSPECT IN OUR PHILADELPHIA PA WAREHOUSE
 
  11
IDMA34736
MakeHNK Machine Tool-Korea
ModelVTC 40/50
YOM2012
ConditionGood Condition
PhotoSee Photo
FEATURES:
FANUC 18TI CNC CONTROLS
RAM WITH 12 STATION AUTOMATIC TOOL CHANGER
C-AXIS TABLE WITH LIVE MILLING
CAPACITY:
TABLE DIAMETER
3998 MM
MAXIMUM SWING
4999 MM
MAXIMUM WORK HEIGHT
4000 MM
RAM STROKE
2000 MM
RAM CROSS SECTION
350 MM X 350 MM
CROSS RAIL VERTICAL TRAVEL
2500 MM
CROSS RAIL POSITIONING
10 X 250 MM STEPS
TABLE SPEEDS, 2-SPEEDS
1 TO 50 RPM
C-AXIS
0.001 DEGREE
TABLE WEIGHT CAPACITY
39916 KG
MACHINE WEIGHT
133719 KG
LIVE MILLING SPINDLE:
LIVE MILLING MOTOR
22 KW / 26 KW
LIVE MILLING SPEEDS
15-1500 RPM
SPINDLE TAPER
CAT 50
EQUIPPED WITH:
FANUC 18I-TB 3-AXIS CNC CONTROLS, PENDANT MOUNTED
12 POSITION AUTOMATIC TOOL CHANGER
4009 MM 4-JAW CHUCK
RIGHT ANGLE HEAD
THRU-SPINDLE COOLANT
C-AXIS TABLE DRIVE
CHIP & SPLASH GUARDING
CHIP CONVEYOR SYSTEM
88 KW / 115 KW MAIN DRIVE MOTOR
NOTE:
INSPECT IN PLANT UNDER POWER!
 
  12
IDMA34735
MakeFarrel
ModelDouble Column 4-Axis
YOM2019
ConditionGood Condition
PhotoSee Photo
SPECIFICATIONS:
TABLE DIAMETER
4267 MM
MAXIMUM SWING
4572 MM
MAXIMUM HEIGHT UNDER RAM FACE
3099 MM
VERTICAL RAM STROKE
2032 MM
RAM CROSS SECTION
287 MM X 274 MM
DIAMETER OF BORE WITH BOTH RAMS
1016 MM
PROGRAMMABLE AXES
X-1,Z-1,X-2,Z-2
RAIL ELEVATION
W-AXIS
TABLE SPEEDS
TO 50 RPM
TABLE WEIGHT CAPACITY
75 TONS
APPROXIMATE FLOOR SPACE
9017 MM L-R, 7137 MM F-B
MACHINE HEIGHT, MIN CLEARANCE
5740 MM
MACHINE HEIGHT W/ EVERYTHING UP
8306 MM
EQUIPPED WITH:
FANUC 0I-TF CNC CONTROL
(2) VERTICAL RAMS EACH WITH 2032 MM RAM TRAVEL
(2) 8-STATION AUTOMATIC TOOL CHANGERS (CAT 60)
POWER DRAW BARS ON EACH RAM
4267 MM T-SLOTTED TABLE
PENDANT MOUNTED CRT
MISC #60 TAPER TOOL HOLDERS
STEEL TELESCOPING WAY COVERS ON CROSS RAIL
149 KW AC TABLE DRIVE
FULL DOCUMENTATION & MANUALS
 
  13
IDMA34630
MakeDorries-Scharmann
Model
YOM1994
ConditionGood Condition
PhotoSee Photo
TABLE DIAMETER: 27' (8230mm)
SWING
COLUMNS FORWARD: 28' (8535mm)
COLUMNS RETRACTED: 42' (12800mm)
TABLE SPEEDS
LOW RANGE: 0.01 - 2.44 RPM
HIGH RANGE: 0.02 - 6.00 RPM
TORQUE
LOW RANGE: 1,089,200 FT-LBS AT 0.01 - 0.60 RPM
HIGH RANGE: 435,750 FT-LBS AT 0.02 - 1.50 RPM
TABLE MOTOR: 125 HP
TABLE LOAD CAPACITY: 300,000 LBS. (136200kg) EVENLY DISTRIBUTED
COLUMN
HOUSING TRAVEL: 165"(4191mm)
DRIVE MOTOR: 15 HP
TRAVERSE RATE: 23 IPM
ATTITUDE ADJUSTMENT: +/- 0.001" - 0.125"
CROSSRAIL
HEIGHT UNDER RAIL: 20" - 140"(508-3556mm)
RAIL VERTICAL TRAVEL: 117"(2972mm)
DRIVE MOTOR: 25 HP
TRAVERSE RATE: 14 IPM
LEVEL ADJUSTMENT (MANUAL): +/- 0.001" - 0.125"
SADDLE
CROSS TRAVEL (EACH SIDE): 221.0"
FEED RATES: 0.005 - 1.125 IPR
RAPID TRAVERSE: 29.5 IPM
MAXIMUM FEED FORCE: 30,000 LBS.(13620kg)
RAM
TRAVEL LEFT: 84"(2137mm)
TRAVEL RIGHT: 67"(1702mm)
CLEARANCE UNDER RAM (TOOL REMOVED): 130"(3302mm)
FEED RATES: 0.005 - 1.125 IPR
RAPID TRAVERSE: 29.5 IPM
MAXIMUM FEED FORCE: 15,000 LBS. (6810mm)
MAXIMUM REACH OF RAM FROM TABLE: 290"(7366mm)
ROUTERS
TYPE: TEMPUS# CT55
POWER: 20 HP
SPEEDS: 7100 - 14,200 RPM
TOOL HOLDERS: 3/4" AND 2" (SQUARE SHANK)
OPERATOR PLATFORM
CAPACITY: 500 LBS.
HORIZONTAL TRAVEL RATE (VAR. AC): 20 - 200 IPM
VERTICAL TRAVEL RATE (FIXED PNEUMATIC): 80 IPM
ELECTRICAL: 460V/3P/60HZ/520A
EQUIPPED WITH:
GE FANUC TTA CNC CONTROL
HYDROSTATIC MAIN BEARING
DIRECT CURRENT PRIME MOVER
OPERATOR CAB WITH POWER VERTICAL AND HORIZONTAL MOVEMENT
ADJUSTABLE ANGLE MILLING HEADS - CAN BE LOCATED AT BOTTOM OF EITHER RAM OR TOP OF RIGHT HAND RAM.
 
  14
IDMA34595
MakeMorando
Model
YOM1980/2015
ConditionGood Condition
PhotoSee Photo  |  See Video
Table Size: 1700 mm
Max turning diameter: 2000 mm,
Height Under cross slide: 1800 mm
Height under turret: 1500 mm
Cross slide rise and fall: 800 mm
Ram traverse: 1500mm L-R (Izq-Der)
Turret traverse: 1000 mm
Max weight on table: 12000 kilos
Speeds: 0-30 rpm, 30-74 rpm, 74-155 rpm
ATC: 2 x 12 ATC
Motor: 75 KW
Length: 10000 mm
Width: 6000 mm
Height: 5700 mm
Weight: 37000 kilos
CNC: Siemens 840D Colour Graphic Control
 
  15
IDMI7717
MakeWMW Niles ,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
CNC : Fanuc OiTF
Warranty :-1 year for cnc system
chuck dia : 1500mm
swing : 1600mm
x : 1600mm dia
z : 600mm
Height : 1000mm
chuck speed 100mm
chuck speed commendable from cnc
Threading Operation(MM/Rev,CSF)Available
Turret 5 station
Automation Lubrication
Chuck power 20 HP
Complete new wiring with elements/switch gears.
Repeatability/Accuracy 0.010mm
Machine H=9.5 feet, W=8 feet, L=8 feet,
Weight : Approx 14 Ton
 
  16
IDMI7716
MakeJungenthal,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
CNC : Fanuc OiTF
warrenty : - 1 year for CNC system
chuck dia : 1100mm
swing : 14000mm
x : 1100mm dia
z : 750mm
height : 1100mm
chuck speed : 10-250RPM
chuck speed commendable from cnc
Threading operation (MM/Rev, CSF) Available
turret 4 station auto index & lock
Automatic lubrication
chuck power 20hp motor
complete new wiring with elements/ switch gears
repeatability / accuracy 0.010mm
 
  17
IDMA34584
MakeBERTHIEZ
ModelLVM 200
YOM1986/ 2008 RETROFIT CINETIC
ConditionGood Condition
PhotoSee Photo
CNC : SIEMENS 840 D
Equipped with :
C axis - Live tools
20 pocket ATC
RENISHAW part and tool probes
CAPTO C6 tool post
Grinding head
APC with 2 pallets dia. 2 000 mm
Chip conveyor
Spindle chiller
Specifications :
Chuck Ø 2 000 mm
Max. turning Ø 2 500 mm
Max. turning height 1 780 mm
Ram vertcial stroke 1 250 mm
Ram section 240 x 210 mm
Motor power 69 kW
Chuck speed (2 ranges) 1,6 - 200 RPM, 2 - 250 RPM
Rapids 1 to 6 000 mm/min
Feed rates 1 000 mm/min
Milling spindle taper ISO 50
Milling spindle power 15 kW
Milling spindle speed (2 ranges) 1,6 - 670 RPM, 50 - 2 000 RPM
 
  18
IDMA34583
MakeFroriep German
Model
YOMREBUILT & CNC RETROFIT IN 1999
ConditionGood Condition
PhotoSee Photo
FEATURES:
SIEMENS 840D CNC CONTROL
2-VERTICAL RAM HEADS
CAPACITY:
TABLE DIAMETER: 10,000mm
TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm
MAXIMUM TURNING HEIGHT: 5000mm
RAM VERTICAL TRAVEL: 2000mm
RAM SWIVEL +/- 30/15 DEG
MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t
TABLE LOAD CAPACITY: 200t
TABLE SPEED RANGES, INF VARIABLE: 4
TABLE SPEEDS: 0.13 TO 13 RPM
CROSS RAIL ELEVATION MOTOR: 40.23 HP
NUMBER OF FEEDS, VERTICAL & HORIZ: 30
CROSS RAIL ADJUSTMENT MOTOR 86 HP
RAPID TRAVERSE MOTORS: 15.5 HP
MAIN MOTOR: 250 HP

EQUIPPED WITH:
SIEMENS 840D CNC CONTROL NEW 1999
DUAL PENDANT OPERATED CONTROLS
2-VERTICAL CNC CONTROLLED RAMS
10,000mm DIAMETER T-SLOTTED TABLE
4-HEAVY DUTY FACE PLATE TYPE JAWS
HYDROSTATIC BEARING SYSTEM FOR TABLE
DUAL OPERATORS PLATFORMS
DUAL JORGANSEN CHIP CONVEYORS
250 HP TABLE MOTOR
 
  19
IDMA34407
MakeWMW Niles ,Germany
ModelDKZ2000
YOM1984
ConditionGood Condition
PhotoSee Photo
Table diameter - 2000mm
Swing with side support - 1850mm
Swing without side support - 2000mm
Cross rail adjustment - 1150mm
Turning height - 1250mm
Workpiece's weight - 6000kg
Dimensions - 4100x5300x4800mm
Weight - 33000kg
 
  20
IDMI7582
MakeHonor Seiki
ModelVL86A
YOM
ConditionGood Condition
PhotoSee Photo
Max. swing diameter: 37.4"
Max. cutting diameter: 31.5"
Chuck diameter: 24"
Spindle
Spindle speed: 25-1250 RPM
Spindle bearing diameter: 78.7"
2 Speed gearbox
Turret
Number of tools: 12
Tool shank size: 32 mm,
X axis travel; 17.72"
Z axis travel: 33.46"
X axis rapid travel: 630 IPM,
Z axis rapid travel: 630 IPM,
Motor
Spindle motor: 30/37 kw,
X axis servo motor: 4 kw,
Z axis servo motor: 4 kw
Measurement
L X W: 77" x 134 "
Machine height: 146"
Net weight: 25,350 lbs
Total power consumption: 40 KVA
CNC Systems Inc
40 Water street
 
  21
IDMA34167
MakeSchiess Froriep
Model18Dec16
YOM1984
ConditionGood Condition
PhotoSee Photo
Turning dia : 2000 mm
Turning height : 1300 mm
Machine weight : 18 tons
CNC
 
  22
IDMA34136
MakeTITAN UMARO
ModelSC33
YOMRetrofitted in 2010
ConditionGood Condition
PhotoSee Photo  |  See Video
3m Table
3.3m Swing
1.78m Max Work Height
20Tonne Max Table Weight
100KW Main Servo Motor
1-150rpm Table Speeds
Single Ram
Ram Travel 1.1m
Ram Capcity 250x250mm
30* +/- Swivelling
Feeds(X/Z)
1 ÷ 4000mm/min
Rapids (X/Z) 6000mm/min
2 Axis SIEMENS 810T System (Could be 840T) with remote hand control
48 Tonne Total Weight
 
  23
IDMA34135
MakeSTANKO
Model1А525
YOM1999
ConditionGood Condition
PhotoSee Photo  |  See Video
Max workpiece :dia 2500mm
Max workpiece height : 1600мм.
 
  24
IDMI7524
MakeDALIAN GUOFENG
ModelCK5116
YOM2013
ConditionGood Condition
PhotoSee Photo
CONTROL – SIMENS 802DSL
CHUCK SIZE – 1400 MM
SWING DIA – 1700 MM
HEIGHT – 1100 MM
 
  25
IDMA34134
MakeToshiba
ModelTUE-15
YOM
ConditionGood Condition
PhotoSee Photo
Vertical Boring Mill with 59.05'' Table, 4-Jaw Chuck, 70.86'' Turning Diameter, 59.05'' Turning Height, 35.43'' Vertical Ram Travel, Table Speeds 2-250 RPM, Table Capacity 17,600lb, Coolant, Chip Conveyor, Fanuc 0i-TC CNC Control
SPECS
Convert Specs to Imperial
Table Dia 1,498.6 mm
Swing 1,803.4 mm
Work Ht-U/R 1,719.6 mm
Power 29.8 kW
RPM 250 RPM
Dimensions 184" X 181" X 170"
Weight 37,000 LBS
 
  26
IDMA34109
MakeTos Hulin
ModelSKIQ12
YOM1986/2008
ConditionGood Condition
PhotoSee Photo
- CNC Control Siemens Sinumerik 840 Di
- Faceplate
- ATC 15-fold
- Chip Conveyor
faceplate diameter 1250 mm
swing diameter 1500 mm
turning height 1570 mm
max. ram stroke 1000 mm
Tool changer 15
chip conveyor
control Siemens Sinumerik 840 Di
workpiece weight 12 t
faceplate turning speed range 2,5 - 250 U/min
workpiece height max. 1250 mm
total power requirement ca 40 kW
weight of the machine ca. 25 t
dimensions of the machine ca. - mfaceplate diameter 1250 mm
swing diameter 1500 mm
turning height 1570 mm
max. ram stroke 1000 mm
Tool changer 15
chip conveyor
control Siemens Sinumerik 840 Di
workpiece weight 12 t
faceplate turning speed range 2,5 - 250 U/min
workpiece height max. 1250 mm
total power requirement ca 40 kW
weight of the machine ca. 25 t
dimensions of the machine ca. - m
 
  27
IDMA34107
MakeO-M
ModelNEO-26EX
YOM2011
ConditionGood Condition
PhotoSee Photo
Table dia. : 2600 mm
Max. Swing dia. : 2800 mm
Max. cutting dia. : 2800 mm
Max. cutting height : 2000 mm
Max. table load : 20000 Kg
Distance from table surface to holder end : 2200 mm
Max. torque : 40000 Nm
Max. cutting force : 25000 N
Crossrail movement (up-down) : 1200 mm
Cross rail positioning step : 200 mm x 7 steps
Ram movement
From table center to right : 2010 mm
left : 100 mm
Up-down : 1000 mm
Ram size : 230 x 230 mm
Table speed :
1.0 ~ 39.8 rpm
3.8 ~ 150 rpm (2 steps)
Rapid feed rate (X, Z) : 10000 mm/min.
Cutting feed rate : 0 ~ 3600 mm/min.
Main Motor (Fanuc) : AC 30/37 Kw
ATC 12 tools
Fixed address type random selection
Machine Weight : 26300 Kg
 
  28
IDMA34073
MakeTos Hulin
ModelSKIQ20
YOM1993
ConditionGood Condition
PhotoSee Photo  |  See Video
Control system Siemens Sinumerik 820
Max. diameter of workpiece 2200 mm
Clamping diameter of rotary table 2000 mm
Max. load of table 20000 kg
Max. workpiece height 1260 mm
Ram travel (Z) 1000 mm
Tool magazine
Number of positions in magazine 15
Machine weight 35000 kg
Machine dimensions l x w x h 5000x4000x6000 mm
 
  29
IDMA34072
MakeToshiba
ModelTXN16/3
YOM1992
ConditionGood Condition
PhotoSee Photo
Table dia. : 1600 mm
Max. cut dia. : 1750 mm
Swing Dia. : 2000 mm
Max. cut height : 1290
Max. Height : 1635 mm
X-travel : 1340 mm
Z-travel : 900 mm
Cross rail (up-down) : 1000 mm
2-table
ATC : 24 tools
Milling Head
TableSpeed : 250 rpm
Table motor : 45 Kw
Control : Fanuc 15T
 
  30
IDMA33982
MakeSchiess Froriep
Model
YOMRetrofitted in 2010
ConditionGood Condition
PhotoSee Photo  |  See Video
Table dia. : 2500 mm
Swing dia. : 3500 mm
Working height : 2500 mm
Head vertical travel : 2000 mm
horizontal travel : 2000 mm
Ram section : 300 x 250 mm
Max. Table Load : 50 Tons
Control : Fanuc 0i-T
 
  31
IDMA33981
MakeOM
ModelTMD35/45
YOMRetrofitted in 2005
ConditionGood Condition
PhotoSee Photo
Control : Fanuc 0T
Table dia. : 3500 mm
Swing dia. : 4500 mm
Shipment :
1 x 40ft FR
1 x 40ft OT
2 x 40ft HQ
 
  32
IDMI7423
MakeDaewoo
ModelPuma V550
YOM1999
ConditionGood Condition
PhotoSee Photo
Maximum Swing……………………… 31.5″
Maximum Turning Diameter……………. 28.7″
Maximum Work Length………………… 29.5″
X-Axis Travel……………………… 15.4″
Z-Axis Travel……………………… 30.7″
Chuck Diameter…………………….. 24″
Spindle Speed Range (2 Speed Gearbox)… 20 To 2,000 Rpm
Spindle Motor……………………… 50 Hp
Turret……………………………. 10 Positions
Maximum Feed Rate………………….. 236 Ipm
Machine Size……. 75″ X 107″ X 128″ Tall
Machine Weight….. 20,000 Lbs
Equipped With:
* Doosan Fanuc 18t CNC Control
* Chip Conveyor
* 50 Hp With 2 Speed Gearbox
* Box Way Construction
* 21″  3-Jaw Hyd Chuck (faceplate in photo does not go with machine)
 
  33
IDMA33843
MakeTos Hulin
ModelSKJ10BNC
YOM1981-83
ConditionGood Condition
PhotoSee Photo
Table diameter: 1000 mm
Maximum turning diameter: 1300 mm
Maximum work piece weight: 5000 kg
Speed :​​133-24000 rpm
main drive power (max): 40 kW
Torque (max) :15000 Nm
Power consumption: 65 kW
Maximum workpiece height - 1150 mm
Caliper horizontal movement - 750 mm
Tool holder - turret
Number of tools in the magazine - 5
Dimensions: Width 3320 mm Length 4150 mm Width 3400 mm
Weight: 13 t
 
  34
IDMA33800
MakeTadu
ModelFS-750
YOM1984
ConditionGood Condition
PhotoSee Photo
Swing over bed: 1500 mm,
Swing over cross slide:600 mm,
Traverse:
Z: 350 mm,
X:700 mm,
Spindle speeds:0-4000 rpm,
4 jaw chuck:1200 mm,
Equipped with: Torreta automatica de 6 posiciones
Equipment: Automatic 6 station tool post
Motor: 20 cv/hp
Length: 3810 mm,
Width: 1930 mm,
Height: 1770 mm,
Weight: 6500 kgs
 
  35
IDMA33787
MakeBerthiez France
ModelTVM1400/125F2
YOM
ConditionGood Condition
PhotoSee Photo
Table Diameter:1244.60mm
Maximum Swing:1346.20mm
B-Axis Rotation:360° (.001° increments)
Turning Tools:C5 Capto
Milling Tools: CAT50
Turning Speed:550 RPM
Milling Speed:2500 RPM
Turret Configuration:16 Turning/31 + 5 Milling Automatic
EQUIPPED WITH:
Fanuc 16i-T CNC Control
(2) Pallet Changer w/ Set Up Station for Indicating/Clamping Outside Machine
Coolant Through Spindle
Renishaw Part Probing
Touch Tool Measuring
(1) Horizontal C5 Capto Main Block
(1) Vertical C5 Capto Main Block
(1) Probing Head
 
  36
IDMA33775
MakeCarnaghi
ModelAT1400
YOM2008
ConditionVery good condition
PhotoSee Photo
CNC Siemens 840 D . ( can control 5 axes )
Diameter Chuck table:1.200 mm .
Diameter Swing:1.400 mm .
Capacity workpiece:2.000 Kg .
Revolution per minute:180 Rpm .
Motor power: 60 Kw .
Speed gearbox: 2
Maximum workable height:760 mm .
Ram with 4 built-in rotary tools (4-position turret tool changer)
Chip conveyor
 
  37
IDMA33768
MakeSchiess,German
ModelS1600
YOM1986
ConditionGood Condition
PhotoSee Photo
Faceplate's diameter - 1600 mm
Turning diameter - 2000 mm
Workpiece's weight - 10000 kg
Machine's weight - 21000 kg
CNC
Good for retrofit
 
  38
IDMA33746
MakeTos Hulin
ModelSKJ20
YOMModernization carried out in 2007
ConditionVery good condition
PhotoSee Photo
Board diameter: 2000 mm,
Max. turning diameter:2300 mm,
Max board load: 15000 kg,
CAPTO C6 tool clamping system,
Right support: 8 tools,
Left slide: 4 tools,
Electric motor power: 50 kW,
Machine weight: 35000 kg,
Control:Heidenhain 840D system,
Two slide CNC carousel
 
  39
IDMA33643
MakeFemco,Taiwan
ModelVL12
YOMnew 2004
ConditionVery good condition
PhotoSee Photo
Fanuc #18T CNC Control
6 Tool Stations
Table Diameter 49.2" - Max Swing 63"
Work Piece Weight Capacity 10,000 LBS
Max Turning Height 43"
Horizontal X-Axis Travel 51"
Vertical Z-Axis Travel 42"
Spindle Speeds, Range 2.8 to 280 RPM
Motor Rating 50 HP
 
  40
IDMA33543
MakeTOS
Model
YOM2007
ConditionWorking
PhotoSee Photo  |  See Video
Model: SKJ120A
Table dia. 2000 mm
Max turning diameter 2300 mm
Max. turning height 1500 mm
Max. workpiece weight 15000 kg
Machine weight 32600 kg
 
  41
IDMA33468
MakeDjunenthal
ModelJU 14
YOM
ConditionGood Condition
PhotoSee Photo
Chuck plate diameter (mm) : 1400
Max turning diameter (mm) : 1600
Max turning height (mm) : 1200
Machine number : 187705
Control SIEMENS SIN 820T
RPM / Speed 1 - 240
Z-axis ram displacement (mm) : 1000
Voltage (V) : 400
Hertz (Hz) : 50
Included parts & extra info
Automatic tool changer 12 positions
Tools
 
  42
IDMA33467
MakeDorries-Scharmann
ModelVCE 1400/125
YOM
ConditionGood Condition
PhotoSee Photo
Chuck plate diameter (mm) : 1250
Max turning diameter (mm) : 1400
Max turning height (mm) : 975
Construction year : 1990
Control : SIEMENS
RPM / Speed 15 - 2000
Z-axis ram displacement (mm) : 600
X-Axis saddle travel (mm) : 1900
Voltage (V) : 400
Hertz (Hz) : 50
Included parts & extra info
Automatic tool changer
Coolant system
Transformer
X-axis telescopic bed guides
 
  43
IDMA33466
MakeHankook
ModelVTB 140
YOM
ConditionNew ,Unused
PhotoSee Photo  |  See Video
Chuck plate diameter (mm) : 1400
Max turning diameter (mm) : 1600
Max turning height (mm) : 900
Construction year NEW
Control FANUC 31iTA (with Manual Guide 1)
RPM / Speed 0.8 - 320
Max load (kg) : 8000
Max load (tons) : 8
Z-axis ram displacement (mm) : 900
X-Axis saddle travel (mm) : 1600
Rapid Traverse (mm / min) : 12000
Voltage (V) : 400
Hertz (Hz) : 50
Included parts & extra info
Tool Changer 12 Positions
Coolant system
Transformer
X-axis telescopic bed protection
 
  44
IDMA33463
MakeHankook
ModelVTC 125E
YOM
ConditionGood Condition
PhotoSee Photo
Chuck plate diameter (mm) : 1250
Max turning diameter (mm) : 1600
Max turning height (mm) : 1400
Construction year : NEW
Control : FANUC 31iTA
RPM / Speed : 3333
Max load (kg) : 8000
Max load (tons) : 8
Z-axis ram displacement (mm) : 900
X-Axis saddle travel (mm) : 1600
Voltage (V) : 400
Hertz (Hz) : 50
 
  45
IDMA33397
MakeSchiess,German
ModelKZ6000
YOMRetrofitted in 2006
ConditionGood Condition
PhotoSee Photo
Table size: 6000 mm,
Max. swing : 6600 mm,
Working height: 4000 mm,
Weight approx: 16-180 tons
With right ram CNC Fagor 8050
CNC table
Left ram with DRO table can be opreatedby manual also.
 
  46
IDMA33393
MakeSchiess,German
Model
YOM2001
ConditionGood Condition
PhotoSee Photo
5- Pos. Turret head,
Hydrostatic table bearing
AC-main drive motor Siemens
AC feed drive motors Siemens
Coolant equipment
Hydraulic oil cooler
(refrigerating)Schimpke
Electrical cabinet Vosswinkel
machine housing complete
Swarf conveyor
Faceplate diameter: 1400 mm,
Swing diameter: 1600 mm,
Turning height: 1000 mm,
Ram head vertical travel: 700 mm,
Main motor: 60 kW,
Control: Siemens 840 C
 
  47
IDMA33347
MakeHankook
ModelVTB125E
YOM2015
ConditionGood Condition
PhotoSee Photo
X axis: 1600 mm,
Y axis: 700 mm,
Z axis: 900 mm,
Max. diameter: 1600 mm,
Weight: 30000 kg,
Control: Fanuc 32i
 
  48
IDMA33285
MakeFroriep
Model40KZ350
YOM
ConditionGood Condition
PhotoSee Photo
Cnc : n°2 FAGOR 8025 TI
Face plate diameter : 3500 mm
Max turning diameter : 3800 mm
Max turning height : 2300 mm
Capacity load table : 40.000 Tons
n° esagonal ram : 2
Vertical ram range : 1500 mm
Left carriage stroke : 2200 mm
Right carriage stroke : 2500 mm
Main motor power : 70 kw
Plateau rotation speed : 10 - 38 rpm
Number of ranges : 2 2
Axial recirculating ball screws diam 80 mm
FAGOR motors with built-in planetary gear motor
 
  49
IDMA33274
MakeTitan Romania
ModelSC25/33
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter mm 2500
Workpiece diameter mm 3250
Workpiece max. height mm 1800
Workpiece max. weight (taper rollers bearing) Kgs 18000
Right vertical support slide travel (pentagonal turret) mm 760
Left vertical support slide travel mm 1000
Vertical supports max. angular setting drg 35
Turret holes diameter mm 80
Cross-rail vertical travel mm 1200
Table speed RPM 1.02-92
Working speed mm/min 2-4000
Rapid speed of the working heads mm/min 2-6000
Main DC motor Kw 55
Cross-rail motor Kw 7.5
Weight of the lathe Kgs 48000
Overall dimension
- Length mm 5300
- Width mm 5400
- Height mm 5600

The machine will be completely retrofitted and supplied with following brand new components:
- General revision of the machine;
- Regrinded guideways and plating of the counter guideways with Biplast/Turcite;
- the hydraulic unit with components made by CE
- the electrical equipment with parts made by Schneider , Shrack, Siemens
- old main drive motor - 55 kW – DC with new Siemens drive
- the feeds drives motors - Siemens made 20 Nm. - AC brushless
- the CNC equipment – Fanuc 0iD or Siemens 808 (by customer choice)
- ILC / DROPSA – Italy lubricating components ,
- HANSA FLEX Germany rubber and metal tubes ,
- IGUS / BREVITTI Italy cables and tubes conveyors ,
- TIMKEN , SKF , FAG , RHP , INA bearings ,
 
  50
IDMA33255
MakeTitan Romania
ModelSC25/33
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
1. GENERAL DESCRIPTION OF THE MACHINE
The vertical turning lathe SC 25/33 CNC with TWO vertical rail head is designed for machining of large sized castings and fabricated parts of different shapes, by rough and finish operations of:
- Inner and outer turning
- Plane turning
- threading
- tapping
- drilling
The machine is basically designed on the following structure:
- the bed and the table
- the two column frame, closed by an upper closing cross beam
- the cross rail, vertically displaceable along the column guide ways
- the rail heads, built for turning
- Fanuc 0iTD control, Fanuc AC brushless feeds drive 12 Nm with 1/5 ratio ZF reducers , DC brushless main motor 60 KW with Siemens driver.
- Rotary encoders on 4 axis.
- SCHRACK, SIEMENS, SCHNEIDER electric components.
- REXROTH and HANSA FLEX hydraulic components.
- DROPSA , ILC Italy , lubricating components.
- TIMKEN, FAG , RHP , INA , SKF bearings.

- BALUFF sensors and switch ,
- TURCITE , BIPLAST anti friction materials ,
- IGUS , BREVITTI – Italy cables and rubber tubes conveyor ,
1.The machine is controlled by the FANUC CNC Unit on the following axes:
- the heads horizontal travel ( “X1” and “X2”)
- the head rams, vertical travel ( “Z1” and “Z2”)

2. THE MACHINE MAIN TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS M.U.SC25/33 CNC

table diameter mm.2,500
swing mm.3,250
work piece maximum height mm.1,800
work piece maximum weight kg.15,000
main drive motor / power
AC brushless 60 kW
main drive gearbox speed ranges no.3
table speed range,RPM 2--100
cross rail vertical travel mm. 1,400
cross rail drive motor / power AC 7.5
cross rail fast displacement speed mm./min. 400
vertical travel Z1 Mm 760
vertical travel Z2 mm 1200



two feeds drives motors / torque , AC brushless 12 Nm and 1/5 reducer
feeds range mm./min. 1 -- 4,000
fast displacement speeds mm./min. 4,000
supply network AC three phase
supply voltage / frequency V. / Hz. 400±10%/50± 2%
machine overall length mm. 5600 x machine overall width mm.5300 x machine overall height mm.5400
machine net approximate weight kg. 44,000
2 THE MACHINE MAIN UNITS
The Bed and the Table
The bed and the table are made of special cast iron, with strong ribbing providing a high stiffness of the machine. The main shaft is supported on the bed by means of two taper bearings Timken type.

3.2.The Table Drives
The table is equipped with a Heidenhain encoder mounted in the center of the table, with 1,024 pulses,to achieve a working constant speed , feed per revolution , treading.
The table drive is achieved by horizontal power line composed by an DC 60 Kw electrical motor with,continuously variable speed, through a 3 speed rangegearbox to secondary spindle and then tothe table spindle.The speed steps are shifted in the gearbox by a hydraulic mechanism.

3.3.The Frame
The frame consists in two columns, the bed and an upper closing beam; all these parts are made of,special cast iron for machine tools.
The cross rail is displaced along the high precision guide ways of the columns, drive, by an AC asynchronous electrical motor, through two speed reducers and screw - nuts ,mechanism.
For high accuracy of the cross rail position, on the columns are fitted every 200 mm special indexing devices.

3.4.The Cross Rail
The cross rail is a box type part made of cast iron, properly ribbed, provided with highly accurate
grinded guide ways. The cross-rail contents the mechanisms for the horizontal displacement of the
heads ( Fanuc feed motors, ZF ratio 5 backlash free reducers, pre-tensed ball screws) supported
by precision bearings. The heads displacement are checked by a rotary encoders.
The guide ways of the cross frail are protected by covers.
3.5.The Right Vertical Rail Head for turning:
The assembly of right vertical working head consist of the right saddle, the ram support and the right RAM with pentagonal turret head with 5 manual rotation.
- the saddle, horizontally displaceable along the cross rail guide ways - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5 backlash free reducer and a ball screw - nut mechanism
The saddle displacement is measured and checked by a rotary encoder
- the ram support, mounted onto the slide
- the ram, vertically displaceable inside of the ram support - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5,backlash free reducer and a ball screw - nut mechanism
The ram displacement is measured by a rotary encoder and hydraulically balanced.
Both the slide ways and the ram support inner surfaces are plated with anti-friction materials,to provide a friction less displacement both (1) of the slide along the cross rail guide ways, and (2) of the ram into the rotary support.
3.6 The Left Vertical Rail Head for turning:
The assembly of left vertical working head consist of the left saddle, the ram support and the left RAM with square section 230 X 235 mm.
- the saddle, horizontally displaceable along the cross rail guide ways - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5 backlash free reducer and a ball screw - nut mechanism
The saddle displacement is measured by a rotary encoder
- the ram support, mounted onto the slide
- the ram, vertically displaceable inside of the ram support - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5 backlash free reducer and a ball screw - nut mechanism
The ram displacement is measured by a rotary encoder and hydraulically balanced.
Both the slide ways and the ram support inner surfaces are plated with anti-friction materials, to provide a friction less displacement both (1) of the slide along the cross rail guide ways, and (2) of the ram into the rotary support.
3.7 Hydraulic installation
The hydraulic installation of the machine, made with Rexroth and Hansa Flex components, accomplishes the following functions:
- Vertical rams balancing (“Z1” and “Z2” axis);
- Cross rail indexing.
- Cross rail unlocking;
- Gearbox shifting
- Lubrication of the gearbox and the table main bearing.
3.8 Electrical equipment
The electrical equipment with components Siemens and Schrack consists of an electric cabinet and a control panel. The electric cabinet is placed near the machine. In the cabinet are situated the Fanuc drivers for axis, Siemens driver for main motor the Schneider driver for the 7,5 kW motor of the cross rail and all the conventional components for machine
On the pendant displaceable control panel are placed the Fanuc 0iTD CNC and all controls and signaling elements for the machine.
The electric equipment of the machine SC 25/33 is designed to permit the use the machine like a manual machine from two joy-sticks placed on the control panel
4. THE MACHINE CONTENT OF DELIVERY
4.1. The Basic Machine
- the machine mechanical parts:
- the machine bed with rotary table
- the taper bearing for the main shaft support
- the crown gear for rotary table
- the main drive gearbox
- the columns and upper cross beam
- the cross rail
- the two vertical rail heads
- the two feeds reducer
- the hydraulic unit with components made by Rexroth and Hansa Flex ,
- the electrical equipment with parts made by Schrack, Siemens, and Schneider.
- the main motor driver , Siemens made – 60 kW
- the feeds drives motors , Fanuc made 12 Nm. - AC brushless
- the CNC equipment – Fanuc 0iTD
- ILC / DROPSA – Italy lubricating components ,
- HANSA FLEX Germany rubber and metal tubes ,
- IGUS / BREVITTI Italy cables and tubes conveyors ,
- TIMKEN , SKF , FAG , RHP , INA bearings ,
- WISCONSIN MACHINERY ball screws ,
- HENCKEL Germany putty and paint ,
- Turcite, Biplast anti friction materials
4.2 Normal accessories:
- Standard tool holders = 6 pieces
- Set of devices for horizontality
- Set of 4 jaws
- Set of special keys
- Set of Operation and Maintenance Manuals

4.3. The Special Accessories – at request
- Tool cooling unit with coolant and chip collector .
- Enclosure of the machine
- Linear scales for X and Z axis
Guaranty : 12 months

In the price it is included the erection and commissioning to the enduser . The enduser wil pay for the cost of airline tickets for 3 persons; plus the cost of accommodation in India for 3 persons.
 
  51
IDMA33254
Make
Model
YOM2009
ConditionGood Condition
PhotoSee Photo
Table Diameter:3658 MM
Maximum Swing:4064 MM
Height Under Rail:1067 MM
X-Axis Travel of Ram Past Center line: 610 MM
Z-Axis Vertical Ram Travel:914 MM
Ram Cross Section: 305 MM x 305 MM
Table Speeds: 0-100 RPM
Table Speed Gear Ranges:2
Table Weight Capacity:35 Ton
Z-Axis Thrust: 5443 KG
X-Axis Thrust: 5443 KG
Feed Rates: 3810 MM/MIN
Rapid Rates: 7620 MM/MIN
Table Power:97 KW

Complete with:
Fanuc 18i-T 4-Axis CNC Control
(2) Vertical Ram Heads
(2) 16 Station Automatic Tool Changers
Part and Tool Probe
Hardened & Ground Box Ways on Cross Rail
Fixed Rail Design
Forged Rams
Heavy Duty Casted Base, Columns & Cross Rail
Timkin Cross Roller Bearing
Hardened & Ground Table Gear 2616 MM Diameter
76 MM Diameter Hardened & Ground Ball Screws
GE/Fanuc AC Servo Drives
Heidenhain Linear Feedback
Dual Chip Conveyors
 
  52
IDMA33249
MakeSchiess Defries
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table chuck diameter : 5500 mm
Max swing with moving column bridge : 8100 mm
Max height under tool : 2540 mm
Ram strokes : 2000 mm
ATC with 6 position tool changer – C axis drive
Control retro – fitted with Siemens 840C control in 1998
Serial No SD 48 55X816 (1980)
Complete with
Universal milling head – Heavy duty table jaws – tooling

DISMANTLING REMOVAL BUYER RESPONSIBILITY.
 
  53
IDMA33248
MakeFarrel
Model
YOMNew In 1992. Rebuilt & Retrofitted In 2004(new in 2016)
ConditionExcellent condition,under power
PhotoSee Photo
Features
* Fanuc OT i CNC Control System (New In 2016)
* (New Fanuc OT Control with New Motors and Drives
* Live Spindle
* Table C-Axis with Heidenhain Rotary Encoder
* Two (2) Rams
* Quick Change Tooling
Specifications.
Table Diameter: 4,876 mm
Swing : 5,180 mm
Spindle Motor: 80 Kw
Table Load Capacity: 125 Tons
Table Speeds: 0.5 – 35 rpm
Height Under Tool: 1,830 mm
Ram Size: 240 x 254 mm
Ram Travel: 1422 mm
Ram Cross Travel:2,895 mm
 
  54
IDMA33246
MakeFroriep
Model25KZ-350CNC
YOMMachine was rebuilt in 2003
ConditionGood Condition
PhotoSee Photo
Table Dia-3500 mm
Swing-3800 mm
Height-2250 mm
Table speed-0.38-38 rpm
Motor Power-70 kW
N.2 CNC ram type vertical tools:
Vertical travel: 1500 mm,
Complete with
Chip conveyor
Safety protections
The Machine can be shipped in
1 x 20 ft OT
2 x 40 ft OT
1 x 20 ft flat Pack
Control:CNC-FAGOR
 
  55
IDMA33245
MakeDoerries
Model
YOM1981
ConditionGood Condition
PhotoSee Photo
Machine Type: Vertical Turret Lathe - Single Column - CNC
faceplate ø -3200mm
swing ø -5100 mm
turning height -2500mm
table load- 60000kg
control - Siemens 8T
feed range - 0,01-1000 mm/min
rapid travel range -6m/min
max. ram stroke - 1250 mm
slide adjustment - 2000 mm
tool change unit - 16 Pos.
faceplate turning speed range -stepless- 0,8-100 U/min
cross rail adjustment - 1500 mm
total power requirement ---- kW
weight of the machine ca. - 70 t
dimensions of the machine ca. - 9,3x6,1x6,0m
Accessories:
SIEMENS 8T CNC-control
Additionally at extra cost new electrics and a new Siemens Sinumerik 840D control can be retrofitted.
 
  56
IDMA33244
MakeSchiess,German
Model
YOMRetrofitted in 2006
ConditionGood Condition
PhotoSee Photo
Make-SCHIESS
C.N.C.FAGOR,
Plate diameter 5000 mm,
Maximum turning diameter 5420 mm,
Height admitted under cross rail 3500 mm,
Motor75 KW – 3 controlled axis
 
  57
IDMA33240
MakeOM
ModelTMD30-33
YOM1971 Retrofitted in 1988
ConditionGood Condition
PhotoSee Photo
Double Column
Table dia. : 3000 mm
Swing dia. : 3450 mm
Max. Table load : 50 tons
Max. cutting height : 2300 mm
Max. height from cross rail bottom to table top: 2600 mm
Tool bar travel (up-down) : 1300 mm
Ram travel (L-R) : 1825 mm
Ram swivel (L-R) : 30 deg.
Table speed : 0.9 ~ 40 rpm
Main motor : AC 60Kw
Control: Fanuc 11TT
** For more information, please refer to the attached specifications sheets.
** Both rams works simultaneously
** Dismantled and stored at our warehouse
** Shipment (please refer to the cargo details)
1 x 40ft FR
1 x 20ft FR
1 x 40ft OT
1 x 40ft HC
 
  58
IDMA33230
MakeWMW
Model
YOMRetrofited in 2001
ConditionGood Condition
PhotoSee Photo
Control NUM 750
Chuck dia 2800 mm
Swing dia 3000 mm
Workpiece Turning height 2000 mm
Machine weight approximately 45 tons
 
  59
IDMI7222
MakeGray
Model200VBM
YOM
ConditionGood Condition
PhotoSee Photo
Chuck diameter: 2500 mm,
Swing diameter: 2800 mm,
Max. height under rail:2800 mm,
max. height under ram: 2500 mm,
Vertical ram stroke: 2150 mm,
Ram cross section: 380 x 380 mm,
Control: Fanuc OT
 
  60
IDMA33218
MakeSedin Russia
Model1L532F3-11
YOMoverhaul and modernization in 2016
ConditionGood Condition
PhotoSee Photo
The largest diameter of the workpiece: 3200 mm
The maximum height of the workpiece: 860 mm
Linear positioning accuracy: 0.01 mm
The angular positioning accuracy of: 0.005 degrees.
Maximum weight of the processed product: 8 000 kg
 
  61
IDMA33133
MakeSedin Russia
Model1A512MF3
YOM
ConditionGood Condition
PhotoSee Photo
Max workpiece diameter : 1250 mm,
Max workpiece height : 1250 mm,
Faceplate diameter : 1120 mm,
Max table load : 10000 kg,
Stroke of carriage slide : 800 mm,
ATC 10 tools,
Faceplate speed stepless : 1 – 335 rpm,
Mainspindle power : 55 kW,
Total weight : 26 ton
CNC Sinumeric 646
 
  62
IDMA33106
MakeFroriep
Model
YOM1960/2006
ConditionGood Condition
PhotoSee Photo
• Table diameter: 4,200 mm.
• Max work piece diameter: 4,500 mm.
• Max work piece height: 3,250 mm.
• Max work piece weight: 25 tons
• Rotation speed of table: 7-35 RPM.
• Ram vertical stroke: 1,800 mm.
• New electrical equipment, servo motors and CNC SIEMENS 840 D SL.
• New ball screws Z-and X-Axis. New measuring system.
• Overhauled ram and main motor. New lubrication system.
• Camera monitoring.
 
  63
IDMA33074
MakeIkegai,Japan
ModelVT1100
YOM1991
ConditionVery good condition
PhotoSee Photo
F-15-T, 3 pallets, Max. swing : φ1400 mm, Max. workpiece dia.:φ1200 mm, Main spindle speed : 200.8min-1, Travel(X*Z) : 1100*500 mm, with chip conveyor
 
  64
IDMA33016
MakeKDM
ModelKTM-12/16F
YOM2008
ConditionGood Condition
PhotoSee Photo
Table dia. : 1250 mm
Max. Swing : 1600 mm
Table Load : Max. 6000 Kg
Table indexing : 0.001 deg.
Fixed cross rail
Distance from table top to tool holder : 900 mm
Distance from table top to spindle end : 860 mm
Table speed : 1 – 27 – 90 rpm
4 – 107 – 350 rpm
2 step
Square ram : 240 x 240 mm
Milling head : 2000 rpm
X-travel (L-R) - 1480 mm + 1480 mm
Z-travel (U-D) - 900 mm
Control : Fanuc 18
Shipping
Body – wooden box
ATC, Chip con, covr, etc. - 1 x 40’ container
 
  65
IDMA33002
MakeWebster & Bennet
Model
YOM
ConditionGood Condition
PhotoSee Photo
Axes: 4 axes
Horizontal Stroke ( X axis): 3,911 mm
Left hand ram:
Vertical stroke (w axis): 965 mm,
Right hand ram:
Vertical stroke (Z axis): 965 mm,
Vertical column stroke ( E axis): 1219 mm,
Maximum diameter of work turned with ram:3657 mm,
Maximum diameter of work admitted: 3708 mm,
Height from face plate to underside of cross slide:
Max:2134 mm,
Min: 914 mm,
Horizontal travel of rams or T slide (Table centre outwards): 2032 mm,
Minimum distance between centre of rams: 609 mm,
Minimum distance between centre of ram and turret slide: 762 mm,
Smallest diameter hole toolholder and rams will enter: 298 mm,
Maximum weight load on table: 20,320 kg,
Table details:
Diameter of faceplate: 3048 mm,
Maximum weight load on table: 20,0000 kg,
Speed range: 0-60 revs,
Speed range 1 : 0-10 revs
Speed range 2: 10-35 revs
Speed range 3: 35-60 revs
Feed rate:
Rapid : 3 meters/min,
Cutting feed rate: 0-3 m/min,
Machine dimensions:
Depth (excluding motor): 4,725 mm,
Width: 6000 mm,
Height: 5,613 mm,
Approx weight: 48,762 kg
Control: Siemens Sinumerik 840C
 
  66
IDMA32998
MakeHomma
ModelHTM- 7.0/9.9
YOM1991
ConditionGood Condition
PhotoSee Photo
Control axis: X. Y. Z. C.(Table indexing function) .W (For Cross rail lifting)
Table Diameter: 7000MM
Between both columns: 9000 MM
Maximum working diameter: 9000 MM
Set back: 11200 MM
Maximum working height: 4000 MM( From the table surface to nose of the cutting tool)
Maximum turning length: 11000 MM
Maximum loading weight on table: 250000 KG
Table rotation speed: 0.25 to 30 RPM
Spindle motor: AC 37 / 45KW
C axis index minimum number: 0.001 DEGREE
Spindle rotation speed: 10 to 1000 RPM
Horizontal Travel (X axis): 11300 MM
Compound head (Y axis ):10850MM
Vertical Travel (Z axis): 3000 MM
Cross rail vertical Travel (W axis): 2000 MM
CNC Controller: FANUC 15-M
X, Y, Z axis: inductosyn scale by HEIDENHAIN
5. Accessories: 12 turning holders
Chip conveyor
 
  67
IDMA32983
MakeSchiess,German
Model
YOM2006 Retrofitted .
ConditionGood Condition
PhotoSee Photo
Table size : 3000 mm
Swing Dai : 3500 mm
Turning Height : 2500 mm
Table 120 rpm
with CNC control Fagor 8070
 
  68
IDMA32982
MakeSchiess Froriep
Model
YOM1991
ConditionGood Condition
PhotoSee Photo
Chuck Diameter : 3500mm
Turning Diameter : 4750 mm
Turning Height : 3100 mm
C Axis : 0.001
Table capacity : 40 tons
Table motor power : 75 kw
Milling motor power : 12 kw
 
  69
IDMA32957
MakeScharmann
ModelVCE1600X140SM
YOM1991
ConditionGood Condition
PhotoSee Photo  |  See Video
Control Siemens 850T
Faceplate diameter 1400 mm
Work piece weight on faceplate max.. 9000 kg
Turning diameter max. 1600 mm
Turning height max. 1500 mm
Work piece swing diameter 252 – 1750 mm
with open door max. 1820 mm
Number of rams 1
Ram cross travel X +/- 950 mm
Ram vertical travel Z 1000 mm
Max. cutting force at the ram 50 000 N
Cross rail vertical travel 900 mm (9 x 100 mm steps)
Cross rail speed 425 mm/min
Cutting feeds 0.1 – 6000 mm/min
0.01 – 50 mm/rev.
Rapids X 8000 mm/min.
Z 8000 mm/min.
Table drive motor power rating 69 KW
Table speed range 0 – 315 rpm
Gear steps 2
Step I 2.8 – 78.75 rpm
Step II 11.2 – 315 rpm
Torque at the face plate max. 40000 Nm
Automatic tool magazine/changer 20 positions
Tool radius max. 200 mm
Tool length max. 675 mm
Ram entry diameter min. 340 mm
Equipped with:
Full chip and splash guarding
Internal and external cooling
Chip conveyor
Elevating cross rail
Large package of: tooling, jaws and spares
 
  70
IDMA32954
MakeTos Hulin
ModelSKIQ20
YOM1992
ConditionGood Condition
PhotoSee Photo
X = 2200 mm
Z = 1400 mm
Table diameter Ø 2000 mm
Table capacity 12 tons
Power 60 kW
Speed max. 200 rpm
C-axis
Driven tools
Hydraulic chuck
CNC control Philips
 
  71
IDMA32813
MakeSchiess Froriep
Model
YOMRetrofit & Recondition: 2005
ConditionGood Condition
PhotoSee Photo
Plate diameter: 4200 mm
Max. diameter of the work-piece: 4500 mm
Max. work-piece height: 4000 mm
Max. work-piece weight: 100 t
Vertical travel RAM: 2000 mm
Horizontal travel RAM: 2600 mm
Tool holders (driven tools): ISO 50
Table rotation speed: 40 rpm
Main motor: 147 kW
Milling spindle and C-axis.
C-axis 360.000 positions
originally NC machine with one ram of milling spindle
CNC: Siemens 840-D
C-axis, Live tools
 
  72
IDMA32788
MakeCarnaghi
Model
YOM1997
ConditionGood Condition
PhotoSee Photo
face plate 1.200 mm
swing 1.400 mm
turning height max. 1.190 mm
RAM stroke (Z-axis) 1.390 mm
travel X 1.037 mm
travel Y 1.037 mm
max. workpiece weight 10.000 kg
speed range 2,5-250 min-1
main engine 55 kW
ATC 12-fach
Siemens 840 C.
LxWxH 4,0 x 3,6 x 5,6 m
weight of the machine 16.000 kg
 
  73
IDMA32745
MakeOM
ModelTM2-10N
YOM1984
ConditionGood Condition
PhotoSee Photo
Number of axis: 2
Chuck size: 1000 mm,
Spindle speed: 3~500 rpm,
Tool storage capacity: 5 pcs,
ATC: yes,
Max cutting diameter: 1100 mm,
Max cutting length: 750 mm,
Spindle drive motor: 26 kW,
Machine weight: 12 ton,
Dimensions (L x W x H): 3.7 x 3.3 x 3.9 m,
Product Specification
max. turning diameter: 1100 mm,
Max. turning length: 750 mm,
Chuck size: 1000 mm,
Spindle speed: 3~500 r/min,
Number of tools: 5
Controller: Fanuc 6T
 
  74
IDMA32717
MakeRussian
Model1516F3
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter of working : 1600 mm,
Max. working height : 1000 mm,
Face plate diameter : 1400 mm,
Max. weight of work piece : 6300 kg,
Dimensions : 4510 x 3810 x 5615 mm,
Weight : 19000 kg,
Control: CNC NC-210
 
  75
IDMA32652
MakeTITAN
ModelSC4044
YOM2002
ConditionGood Condition
PhotoSee Photo
with CNC SIEMENS 840 D for 2 axis
tool Basic holder KM 80
In process camera screen
coolant attachment and chip conveyor
oil cooling device, hand held panel
Faceplate diameter: 4000 mm
Swing diameter: 4400 mm
Turning height: 2060 mm
Slide stroke: 1200 mm
Ram head dimension: 250 x 250 mm
Faceplate turning speed range: 1 - 92 U/min
Travel -x axis: 2950 mm
Cross rail adjustment: 1800 mm
Workpiece weight: 30 t
Feeds: 1 - 4000 mm/min
Main drive motor: 55 kW
Total power requirement: 150 kVA
Weight of the machine: ca. 64 t
Dimensions of the machine :ca. 9,0 x 7,2 x 6,6 m
 
  76
IDMA32609
MakeSchiess,German
Model
YOM1993 overhaul 2009
ConditionGood Condition
PhotoSee Photo
CNC VTL with C Axis.
Turning width 5500 mm
Turning Height 4000 mm
Table dia : 5000mm
Tool changer: 18 positions
table speeds max: 92 rpm
with all accessories.
 
  77
IDMA32608
MakeSchiess Froriep
Model
YOM2001
ConditionGood Condition
PhotoSee Photo
CAPACITY:
TABLE DIAMETER : 137"
MAXIMUM SWING : 157"
MAXIMUM TURNING HEIGHT : 98"
VERTICAL RAIL TRAVEL : 78"
RAM STROKE : 63"
TABLE SPEEDS (INF. VARIABLE) : .9-90 RPM
LIVE SPINDLE SPEEDS, (MAX) : 1600 RPM
SPINDLE MOTOR (LIVE RAM SPINDLE)....... 30 HP 30 HP
CROSS SECTION OF RAM : 9.8" X 8.2"
TABLE LOAD CAPACITY : 88,000 LBS
FEATURES:
FANUC 16TT CNC CONTROL
(2) VERTICAL RAMS
LIVE SPINDLE ON LEFT RAM
137" C-AXIS TABLE
EQUIPPED WITH:
FANUC 16TT CNC CONTROL
137" C-AXIS TABLE
COOLANT SYSTEM
HARDENED WAYS
134 HP TABLE DRIVE
 
  78
IDMA32566
MakeSchiess,German
ModelVertimaster VMG 4-PWS
YOM2002
ConditionGood Condition
PhotoSee Photo
Control: Sinumerik 840D
Turning diameter 3200 mm
Gantry passage width 3000 mm
Workpiece height (turning) 2350 mm
Workpiece height (milling) 2310 mm

Max. workpiece weight 25 tons
Pallet clamping area 3000 mm
Width of T-slots 36H12
Palette load 25 tons

Revolutions step less for turning 0.5 - 180 rpm
Revolutions step less for milling 0.004 - 4 rpm
max torque in horizontal table/face plate 75 kNm
Main driver input 110 kW
Horizontal adjustment of support from mid to left 1900 mm
Horizontal adjustment of support from mid to right 2800 mm
Horizontal guidance length of support 1000 mm
Vertical adjustment of ram 1400 mm
Guidance length of ram 1200 mm
Section of ram 280 x 240 mm
Permitted cutting force for turning 50 kN
Boring and milling unit performance 1.4-52-52 kW
Spindle revolutions

Step 1: 5-180-520 rpm
Step 2: 30-1100-3150 rpm
Torque at spindle
Step 1: 2400-2400-850 Nm
Step 2: 450-450-160 Nm
Rapid movement/feed speed X/Z-axis 0.1 - 16000 mm/min
Crossbeam adjustment vertical step less 1900 mm
Crossbeam adjustment speed 4000 mm/min
Gantry adjustment Y-axes +/- 1600 mm
Adjustment speed of gantry 0.1 - 8000 mm/min
3 integrated chip conveyors
Cooling unit:

internal coolant supply
 
  79
IDMA32558
MakeSchiess Froriep
ModelMA80-32 DE
YOMRetrofit 1998
ConditionGood Condition
PhotoSee Photo
Control: Siemens 840 C
Diameter horizontal table: 3000 mm
Max. load on table: 20,000 Kg
Max. torque of horizontal table: 100,000 Nm
Max. work piece height: 1500 mm
Height table base with horizontal table: 820 mm
Distance between table top and floor height: 500 mm
Max. swiveling area: 3200 mm
Crossbeam support right (from table mid to the right): 1770 mm
Crossbeam support right (from table mid to the left): 50 mm
Max. adjustment swiveling right, to the right and the left 30°
RAM at the right - max. vertical travel 1000 mm
Crossbeam - max. vertical travel 1000 mm
Revolutions for horizontal table
Ratio 1.12
Revolutions area I: 0.8 - 6.3 - 20 min-1
Revolutions area II: 3.15 - 25 - 80 min-1
Characteristic Revolution 6.3 min-1
Revolutions main drive engine 100 - 800 - 2500 min-1
Crossbeam support:
Fine feed 0.1 up to 3000 mm/min
Section RAM respectively revolver head 240 x 240 mm Max. section tool shaft 40 x 40 mm
Max. cutting force at travel 1/3 of total travel 50 kN
Crossbeam:
traverse speed 500 mm/min
Step by step height adjustment 50 mm
 
  80
IDMA32553
MakeRoman
ModelSC120
YOM
ConditionGood Condition
PhotoSee Photo
Max. turning diameter:1420 mm
Faceplate diameter:1200 mm,
Max. turning height: 1050 mm
Max. workpiece weight: 6.000 Kg.
Main drive power :45 Kw.
Power alimentation: 380V-50 Hz
CNC:FAGOR
Evacuator chip
 
  81
IDMA32550
MakeTitan Romania
ModelSC43
YOM2002
ConditionGood Condition
PhotoSee Photo  |  See Video
Type of Control: CNC
Technical Parameters
with CNC SIEMENS 840 D for 2 axis
tool Basic holder KM 80
In process camera screen
coolant attachment and chip conveyor
oil cooling device, hand held panel
faceplate diameter 4000 mm
Technic
swing diameter 4400 mm
turning height 2060 mm
slide stroke 1200 mm
ram head dimension 250 x 250 mm
faceplate turning speed range 1 - 92 U/min
travel -x axis 2950 mm
cross rail adjustment 1800 mm
workpiece weight 30 t
feeds 1 - 4000 mm/min
main drive motor 55 kW
total power requirement 150 kVA
weight of the machine ca. 64 t
dimensions of the machine ca. 9,0 x 7,2 x 6,6 m
 
  82
IDMA32532
MakeSedin Schiess
Model1A525MF3
YOM1991/ Rebuild 1999
ConditionGood Condition
PhotoSee Photo
Table size: 2240 mm
Max. swing: 2500 mm
Max. material height: 1600 mm
Table load: 25 ton
Table speeds: 0,27-138 rpm
Movement of vertical supports: 1200 mm
No of vertical supports: 2 pcs
Tool changer on vertical supports w/10 stations
Weight of machine: 47 ton
Control:Siemens Sinumerik 810
 
  83
IDMA32507
MakeSchiess,German
Model3VKE500/900
YOMRetrofit with new cnc controls 1997
ConditionGood Condition
PhotoSee Photo
CAPACITY:
TABLE DIAMETER 196.85"
MAXIMUM SWING 354.33"
MAXIMUM HEIGHT UNDER RAIL 177.16"
RAM VERTICAL TRAVEL 90.55"
COLUMN TRAVEL 88"
TABLE:
MAIN MOTOR 120 HP
TABLE SPEEDS, STANDARD .25-40 RPM
TABLE SPEEDS, CREEP MOTION .0015-.25 RPM
TABLE SPEED RANGES, STANDARD & CREEP 4 EACH
TABLE TURNING FEEDS 0.0032-.4727 IPR
TABLE MILLING FEEDS 0.0984-14.9 IPR
TABLE WEIGHT CAPACITY 100 TONS
FOUNDATION LOAD WITH WORKPIECE 350,000 LBS
MILLING DRIVE:
MILLING SPINDLE MOTOR 25 HP
MILLING SPINDLE SPEEDS 10-500 RPM
MILLING SPEED RANGES 2-RANGES
MILLING FEEDS 0.0984-14.9 IPR
RAPID TRAVERSE:
COLUMN, STANDARD 157.48 IPM
COLUMN, CREEP 0.1574 IPM
CROSS RAIL, STANDARD 94.49 IPM
CROSS RAIL, FINE 2.401 IPM
CROSS RAIL, CREEP 0.165 IPM
FLOOR SPACE:
APPROXIMATE FLOOR SPACE 474" L X 296" W
APPROXIMATE OVERALL HEIGHT 339.37"
EQUIPPED WITH:
FANUC 18-T CNC CONTROL, NEW 1998
SWIVELLING RAM W/LIVE SPINDLE
HEIDENHAIN SCALES & ROTARY ENCODER
THREADING & ANGULAR TURNING
25 HP SPINDLE DRIVE
120 HP TABLE DRIVE MOTOR
440/3/60 ELECTRICS
 
  84
IDMA32479
MakeWMW Niles ,Germany
Model
YOMRetrofited in 2001
ConditionGood Condition
PhotoSee Photo
Chuck dia: 2800 mm,
Swing dia: 3000mm,
Workpiece turning height: 2000 mm,
Machine weight approximately: 45 tons.
Control:NUM750
 
  85
IDMA32472
MakeWMW Niles ,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make : WMW
Retrofited in 2001
Control NUM 750
Chuck dia 2800 mm
Swing dia 3000 mm
Workpiece Turning height 2000 mm
Machine weight approximately 45 tons .
 
  86
IDMA32079
MakeDorries Germany
ModelCT360
YOM1981
ConditionGood Condition
PhotoSee Photo
Max. turning diameter: 4600 mm,
Max. turning height: 4400 mm,
Control: CNC Siemens Sinumerik 820
 
  87
IDMA32075
MakeDoerries
ModelVCE 100 S
YOM1985
ConditionGood Condition
PhotoSee Photo
Control: Siemens Sinumerik 840 D
Chip conveyor: Knoll built in 2003
Coolant system: Knoll year 2003
Tool magazine: 3-column shelf magazine with 76
tool places
Closed workspace with extraction system.
Dimensions and travel paths:
Faceplate diameter: 1000 mm
Circulation diameter: 1600 mm
Working height: 1200 mm
Crossbar travel: 800 mm
Chisel slider: Cross section: 240 x 240 mm
Stroke: 1000 mm
Vertical travel: 1000 mm
Travel horizontally: 950 mm
Crossbeam support: adjustability: 800 mm
Speeds, feeds, adjustment speeds, cutting forces:
Machine table drive: main drive power 75 kW
Number of gear stages 2
Speed ​​range 1st gearbox 5-800 min-1
Max. Machine table load 20 t
Feed drive: Feed range: 0.1-6000 mm / min
0,01-50 mm / rev
Tool system: milling spindle holder SK 50
Cutting force on the support: 50 kN
Electrical connection values: Operating voltage 380 V AC
Control voltage 220 V DC
Frequency 50 Hz
 
  88
IDMA31986
MakeHankook
ModelVTB 125E
YOM2013
ConditionGood Condition
PhotoSee Photo
Max. Table / Chuck Diameter 1,250mm
Table / Pallet Load 8,000kg
Max. Turning Diameter 1,600mm
Swing Diameter 1,600mm
Max. Turning Height 1,400mm
Table RPM 0,9-360
Vertical Travel of Crossrail 700mm
Axis Travel - X 1,600mm
Axis Travel - Z 900mm
Cutting Feedrates - Lowest / Highest 0 / 7,500mm/min
Rapid Traverse Rates 7,500mm/min
No. of Tools (ATC / Turret) 12 (BT50)
Motor - Main Spindle 37 / 45 kW
 
  89
IDMA31985
MakeTITAN
ModelSC22/3 AXIS
YOM2007
ConditionGood Condition
PhotoSee Photo
Diameter chuck: 2000 mm / Max diameter 2150 mm
Turning height: 1450 mm
Chuck speeds: 3 to 140 RPM
Max. load on table: 12 Ton
Milling spindle : speeds 2000 RPM – power 22 Kw
Machine weight approx. 34 T
Equipped with
CNC SIEMENS 840D
C-axis and milling tools
2 x tools magazine., no 4 clamping chucks , chip conveyor
 
  90
IDMA31983
MakeBerthiez France
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table dia 2500 mm
Turning height 2500 mm
Max. Table load 25 tons.
with milling Spindle
Control ESC Nummeric Italy.
Have to change into new control & new
Electric.
With ATC magazine!
 
  91
IDMA31950
MakeHomma
ModelTAC-18F
YOM1998
ConditionGood Condition
PhotoSee Photo  |  See Video
Control: Meldes 530 LH
Table diameter: 1800, 2 Pallet
Swing: 2300, ATC - 12 books,
Loading weight: 7000 kg
 
  92
IDMA31939
MakeTitan Romania
ModelSC27 CNC/MS
YOM2008
ConditionGood Condition
PhotoSee Photo
Table dia 2500 mm
Turning dia 2650 mm
Turning height 1900 mm
Max. Work piece load 15 T.
Ram size 250 x 250 mm
Ram stroke 1200 mm
Tool Taper ISO 50
Machine weight 42 T.
C Axis.
 
  93
IDMA31878
MakeTos Czech
ModelSKJ10BNC
YOM1980 & 1983
ConditionGood Condition
PhotoSee Photo
Ma. turning diameter: 1300 mm,
Table/chuck size: 1000 mm,
Work piece height: 1150 mm,
Work piece weight: 2500 Kg,
Horizontal movement support/ ram 750 mm
 
  94
IDMA31806
MakeYouji,Taiwan
ModelYV1600ATC
YOM2003
ConditionGood Condition
PhotoSee Photo
Table dia: 1600 mm,
Max. swing: 2000 mm,
Max. cutting diameter: 1800 mm,
Max. height under tool:1200 mm,
Max. table load: 8 ton
X axis travel: 1575 mm,
Z axis travel: 900 mm,
Vertical travel of crossrail: 800 mm,
Spindle speed: 2-250 RPM
Spindle diameter: 580 mm,
ATC type: 12 tools,
Tool shank: BT50,
Max. tool size: 350 L x 350 W x 150 H
Control: Fanuc 18T
 
  95
IDMA31783
MakeToshiba Japan
ModelTSN20A
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter: 2000 mm,
Maximum swing: 2500 mm,
Max. height under ram face: 1849 mm,
Vertical travel of ram: 749 mm,
Vertical travel of cross rail: 1000 mm,
Table speeds: 2.5-125 RPM
Table load capacity: 19972 KG,
Approximate floor space: 6147 mm x 5486 mm,
Approximate machine height:5182 mm,
Approximate machine weight: 25963 KG
EQUIPPED WITH:
GE 1050 CNC Control (Not Operable)
16 Position Automatic Tool Changer
Approximately 5 Tool Holders Included
2000 mm Diameter Face Plate w/ 4-Top Jaws
Hardened & Ground Box Way Construction
Coolant and Chip Guards
Automatic Lubrication
Telescopic Cross Rail Slide Way Covers
45 KW0HP AC Table Drive Motor

NOTE:
CNC Control is Not Working
Great Frame for Retrofit.
Coming Out of Defense Contractor's Facility!
Machine is Being Sold As Is, Where Is
Machine Must Be Mo
 
  96
IDMA31751
MakeTos Czech
ModelSKIQ20
YOM
ConditionGood Condition
PhotoSee Photo
Table Diameter:78.74"
Maximum Turning Diameter: 86.61"
Work Piece Maximum Height: 67.32"
Ram Stroke: 39.37"
Cross Rail Vertical Stroke: 49.21"
Maximum Work Piece Weight:44,000 lbs
Table Speeds, 2-Ranges:1.6-160 RPM
C-Axis Indexing:001 Degrees
Live Spindle Speeds, 3-Ranges:4-3000 RPM
Live Spindle Motor:18 HP
Table Motor:84 HP
Floor Space:265" x 223"
Machine Height:212.5"
Machine Weight:72,000 lbs

EQUIPPED WITH:
FANUC 18iT CNC Controls (Retrofit 2010)
78" 4-Jaw Chuck
15-Station Automatic Tool Changer, Turning & Boring
C-Axis
Misc. Tool Holders
Threading
Splash and Chip Guarding
 
  97
IDMA31718
MakePietro Carnaghi (Italian)
ModelAC16TT
YOM
ConditionGood Condition
PhotoSee Photo
Pallet diameter: 1225 mm,
Number of pallets:2
Ma. turning diameter: 1575 mm,
Max. turning height under tool: 1600 mm,
Max. height under rail: 1850 mm,
Table speeds: 1.7-380 RPM,
Table motor: 100 HP,
Table load capacity: 11,000 LBS,
Ram travel: 1225 mm,
Ram cross section: 9.5" x 9.5"
Equipped with:
Fanuc 15TT CNC control,
14" color monitor,
Integrated PLC,
Rotary type pallet changer
Dual 3- jaw hydraulic chucks with 25 mm strokes and independent jaw adjustment,
12 Position tool changer for each ram,
C axis positioning,
Tool probe,
Work probe,
400 gal.coolant system with 100 PSI and 25 GPM flow rate,
Heavy duty chip conveyor,
Hydrostatic slide ways,
Oil chiller
Pendent control panel,
Large quantity of turning and boring tool blocks,
large quantity of chuck jaws
 
  98
IDMA31499
MakeGILDEMEISTER
ModelCTV 250
YOM2002
ConditionGood Condition
PhotoSee Photo
Chuck Dia 250mm
Max. Swing 350mm Dia
Max. Turning Length 200mm
12 Station Turret
Spindle Speeds 20 –5000 RPM
Multiple Production Pallet Shuttle
Swarf Conveyor
Seimens Sinumerik CNC Controls
 
  99
IDMA31488
MakeRafamet Polish
Model
YOM1990/2000
ConditionGood Condition
PhotoSee Photo
4 UNITS
YEAR: 1990/2000
CNC SIEMENS SINUMERIK 850
TABLE DIAMETER 1300 MM
MAX. DIAMETER 1500 MM
ATC 6 TOOLS IN BOTH SIDE
MAX. HEIGHT 500 MM
 
  100
IDMA31280
MakeUmaro,Poland
ModelSC17CNC
YOM
Conditionretrofitted completely
PhotoSee Photo
Make : UMARO/ROMANIA
Main technical data:
FACE PLATE DIA. 1450MM
MAX. SWING DIA. 1700MM
MAX. TURNING HEIGHT 1100MM
MAX. WORKPIECE WEIGHT 8000KG
FACE PLATE SPEEDS : 1 – 200 RPM
MAIN MOTOR POWER : 55KW

Following operations were made to the machine for retrofiting:
BALLSCREW ON X AND Z AXIS;
FEED MOTORS;
REXROTH HYDRAULIC EQUIPMENT;
DROPSA MADE OILING SYSTEM;
SCHNEIDER ELECTRIC COMPONENTS IN THE CABINET;
AIR CONDITIONING IN THE ELECTRICAL CABINET
TURCITE PLATED ON ALL THE NECESSARY SURFACE;
SIMOREG-SIEMENS DRIVER;
GERMAN CABLES SUPPORTS;
SIEMENS 808D CONTROLLER;
The machine can be equipped with :
one ram type with vertical travel 1200mm
or pentagonal support type with 5 pos. and vertical travel of 760mm.
The table drive is achieved by a 55kW electrical motor with continuously variable speed, through original speed range gearbox.
The table is equipped with a rotary encoder, to achieve a working constant speed, feed per revolution, threading.
The cross rail is displaced along the high precision guide ways of the columns, driven by an AC asynchronous electrical motor.
Counter-guides plated with Turcite (Germany) anti-friction material.
Geometrical precision is like to a new machine.
GUARANTEE PERIOD: 12 MONTHS FOR MECHNICAL AND ELECTRIC COMPONENTS.
OPTIONAL :
6 POSITION TOOL MAGASIN +13.000EUR
COOLING INSTALLATION + CHIP TRAY – 9500EUR
SECOND VERTICAL SUPPORT: PRICE ON REQUEST
DELIVERY TIME : AB. 4 MONTHS FROM ADVANCE PAYMENT.This machine is already retrofitted only the electrical components must be installed.

The machine has ballscrew and CNC Siemens 808. The machine can work in manual mode and shows on display as a digital read out system or can be operated as a CNC machine.
We send you attached photo from similar machine sold recently.
Erection and commissioning can be provided by our company by a separate contract.
 
  101
IDMA31274
MakeOM
ModelVL6NR
YOM1989
ConditionGood Condition
PhotoSee Photo
FANUS F-0T Control and APC-2, ATC-12 Table dia : 700 mm
 
  102
IDMA31262
MakeFemco,Taiwan
ModelVL-25M
YOM2015
ConditionGood Condition
PhotoSee Photo
Controller : FANUC 0iTF
Max. swing dia. : 3,000mm
Max. cutting height : 1,800mm
X/Z axis travel : 1,650/1,150mm
Vertical travel of crossrail : 1,500mm
Table dia. : 2,700mm
Max. table load : 20,000kgs
Table speed : 160rpm
Live spindle speed : 40-3,000rpm
BT50
12ATC
With C axis
RENISHAW part setter
Spindle oil cooler
Heat exchanger
Chip conveyor
 
  103
IDMA31261
MakeYou Ji
ModelYV-1200ATC
YOM2014
ConditionGood Condition
PhotoSee Photo
Controller : FANUC 0i-TD
Max. swing dia. : 1,600mm
Table dia. : 1,250mm
Max. table load : 5,000kgs
Max. table speed : 350rpm
Max. cutting height : 1,200mm
Max. cutting dia. : 1,350mm
X/Z axis travel : 930/850mm
Vertical travel of crossrail : 750mm
BT50
12ATC
RENISHAW RMP60 part setter
Oil skimmer
Spindle oil cooler
Air conditioner for electrical cabinet
Chip conveyor
Machine weight : 22,000kgs
 
  104
IDMA31258
MakeKOLOMNA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Make : KOLOMNA
New : 1987/ retro 2012
Control : FANUC 16M
Table dia : 4500 mm
Max swing : 6800 mm ( It was expanded from 5000 mm to 6800 mm )
Max. table load : 100 tons.
Table rotating speed : 1~32 rpm
Max. cutting height : 3000 mm
Main motor power : 110 Kw
It has 2 ram head and simultaeneously move by CNC Control.
 
  105
IDMA31177
MakeSchiess,German
Model4K600
YOM2008
ConditionGood Condition
PhotoSee Photo
Chuck Diameter : 6000 mm
Max turning diameter : 6600 mm
Max height under rail : 3000 mm
Max load on chuck : 60 Tonnes
Max chuck speed : 25 RPM
 
  106
IDMA31137
MakeSchiess Froriep
Model80DV
YOM2008
ConditionGood Condition
PhotoSee Photo
Circular table dia., mm ………… 7500
Max. work piece dia., mm ……. 12000
Max. work piece height, mm ….. 8000
Max detail weight, tons ………..… 400
Travels, mm:
Z1-axis ………………………..……. 3200
Z2-axis ……………………………… 5800
X1-axis ……………………………… 4100
X2-axis ……………………………… 2800
U-axis … 1250 (PF2500)/ 750 (PF1500)
W-axis
C-axis
Machine weight approx, kg … 650.000
 
  107
IDMA30861
MakeToshiba
ModelTSS30/55A
YOM
ConditionGood Condition
PhotoSee Photo
Toshiba Vertical Lathe Table 3m Max Dia 5.5m
Toshiba Vertical Lathe
Model;TSS30/55A
Table 3m diameter.
Max working diameter 5,500mm
H1,900mm Price .
 
  108
IDMA30827
MakeFarrel
Model--
YOMRebuilt & Retrofit in 1992
ConditionGood Condition
PhotoSee Photo
192" Farrel 4-Axis CNC Vertical Boring Mill
Specifications:
4877 mm Farrel 4-Axis CNC Vertical Boring Mill
G & L 8000B CNC Control Retrofit in 1992
2-Vertical Rams
200 TON Table Capacity
CAPACITY:
Table Diameter 4877 mm
Maximum Swing 6401 mm
Maximum Height Under Rail 3658 mm
Ram Stroke 1464 mm
Ram Cross Section 330 mm x 330 mm
Table Speeds .5-48 RPM
Table Weight Capacity 200 Ton
Ram & Saddle Feeds .001-25375 mm/rev
Main Motor 75 KW
Approximate Weight 158865 KG
EQUIPPED WITH:
G & L 8000B CNC Control Retrofit in 1992
Spindle Chiller
Bellow Style Way Covers
75 KW Main Motor
 
  109
IDMA30745
Make
ModelVBM
YOM1981
ConditionGood Condition
PhotoSee Photo  |  See Video
160" Summit Vertical Boring Mill
Specifications:
4064 mm Summit Vertical Boring Mill
FEATURES:
(1) Vertical Ram
5-Position Turret
Full Pendant Control
CAPACITY:
Table Diameter 4001 mm
Max Swing 4293 mm
Max Height Under Rail 2540 mm
Vertical Travel Of Cross Rail 2299 mm
Turret Stroke 762 mm
Ram Stroke 1200 mm
Table Speeds (Inf Variable) 1-92 RPM
Feeds .002-5 mm/min
Rapid Traverse 2489 mm/min
Footprint (W x D) 5791 mm x 6998 mm
Overall Height 6401 mm
Approx Weight 64908 KG
EQUIPPED WITH:
Full Pendant Controls
5-Position Turret
Vertical Ram
(4) Adjustable Top Jaws
Threading On Turret Head
56 KW Main Motor
Inspect In Plant Under Power! condition
 
  110
IDMA30744
Make
Model5280 x 40/160
YOM2009
ConditionGood Condition
PhotoSee Photo
6299 mm CKX CNC Vertical Broing Mill with Live Spindle
Model : 5280 x 40/160
Siemens 840D CNC Control New 2006
001 Degree C-Axis w/ Heidenhain Rotary Encoder
Turning, Milling, Drilling & Threading Cycles
Ram With Live Spindle
Right Angle Head
Table Outrigger Supports for 8 Meter Turning
Independant Elevating Operator Platform
Steel Sliding Way Covers
Chip Conveyor
CAPACITY:
Table Diameter 6300 mm
Turning Diameter 8000 mm
Maximum Turning Height 4000 mm
Maximum Stroke of Vertical Rams 2500 mm
Ram Cross Section 400 mm x 400 mm
Cross Rail Travel 3500 mm
Table Load Capacity 160 Tons
Table Speed Ranges .315-31.5 RPM
Table Indexing and Milling Speeds .0002-.2 RPM
Table Indexing .001 Degress
Main Motor 125 KW
Milling Spindle Taper ISO #50
Milling Spindle Speeds, Max 800 RPM
Milling Spindle Motor 34 KW
Machine Footprint 15113 mm x 10414 mm
Machine Height 12395 mm
Machine Weight 350 Tons
 
  111
IDMA30639
MakeDoerries
ModelVCE100
YOM1985
Condition
PhotoSee Photo
SIEMENS SINUMERIK 840C
Workspace
max. Circulation - 1400 mm
max. Distance - Steel rail 800 mm
max. Distance - Cross-bar 800 mm
max. Meisselweg vertically 750 mm
max. Spann - 950 mm
max. Workpiece weight 1250 kg depends on the speed
Slide
Number of carriages on the cross beam 1

Faceplates - 1000mm 2pcs.
Speed range 4 - 450 rpm
Drive power 63 kW
Face plate changing device yes

Special facilities closed work space
Coolant - High pressure system for drilling
Tool measuring
 
  112
IDMA30581
Make
Model
YOM
Condition
PhotoSee Photo
CNC Double Column Vertical Lathe SKD 63/65D 2007
Control System SIEMENS SINUMERIK 840 DE
Producer: CKD Blansko
Maximal workpiece diameter [mm] 6 500
Maximal workpiece height [mm] 4 500
Maximal workpiece weight [kg] 100 000

Table diameter [mm] 6 300
Maximal table speed [rpm] 40
Power of table drive (Master – Slave) [kW] 2x71
Maximal torque [Nm] 210 000

Crossrail vertical travel [mm] 3 600 Steps [mm] 300
Crossrail movement speed [mm.min-1] 500

Horizontal travel of the ram – X axis [mm] 3 775
Travel over center of the table [mm] 550
Vertical travel of the ram – Z axis [mm] 2 500
Rapid traverse of X and Z axis [mm.min-1] 8 000
Maximal cutting force [N] 100 000

Milling and boring spindle

Spindle drive SIEMENS 1FE 1116
Spindle speed [rpm] 2 - 3 000
Spindle drive power [kW] 37,7
Spindle torque [Nm] 1 200 Two steps planetary gearbox I. step i 4,5 : 1 II. step i 1 :1 Spindle taper ISO 50

Weight of the machine [kg] 165 000
Machine dimensions - Length [mm] 13 100 - Width [mm] 9 950 - Height [mm] 11 860 - Height over the floor [mm] 9 910


Equipment

• Tool changer – double disc type magazine for 18 rotary tools ISO50 and 6 turning tool holders • Operators platform • Safety fences around the table, doors driven by motor • Chip conveyor around the table • Straight chip conveyor • Tool cooling - for external and internal cooling • Cooling of hydrostatic oil • Workpiece measurement Renishaw • Straight milling head • Angle milling head 90° • Universal angle milling head, adjusted manually • Pick-up magazine for heavy milling heads • Turning tool holders CAPTO C8
 
  113
IDMA30573
MakeSFAC France
Model
YOM
Condition
PhotoSee Photo
Diameter platou:
mm 5.000
Diametr in work:
mm 5.600
Vertical work:
mm 3.400
CNC:
FANUC 16T
Main power motor:
kw 120
Table speed ranges:
n° 4
speed table:
rpm. 2.3 - 34
Power alimentation:
380W- 50 Hz
n° of carri:
n° 2
Ram stroke:
mm 1850
Wheight:
Ton. 140
 
  114
IDMA30524
MakeSkoda Czech
Model
YOMRetrofitted in 2008
ConditionUnder power
PhotoSee Photo
CNC=SENTROL2
TABLE DIAMETER=4000mm
SWING=4350mm
WORKING HEIGHT=2500mm
INSPECTION UNDER POWER AVAILABLE
 
  115
IDMA30439
MakeTos Czech
ModelSK16CNC
YOM
ConditionGood Condition
PhotoSee Photo
max. diameter of turning left smykadlovým slide 1700 mm
max. distance between the clamping plate and knife holder slide left ram 1250 mm
max. ram extension Left slide in 660 mm
Max. protrusion of the turret slide 550 mm Z
Revolving slide cross travel X 1020 mm
cross travel slide left ram U 980 mm
Clamping plate diameter 1620 mm
max. workpiece weight of about 5000 kg
max. section of the body knife 40x40 mm
Power of main engine control and 30 kW / A 52.3
nominal speed main engine 1475 rev / min.
servomotors lateral displacement X, U 22 Nm -3000 rev / min.
Servomotors strips Z, V 22 Nm -3000 rpm / min.
SERVOSTAR 614 servo inverters
hydroaggregate motor power of 2.2 kW (1450 rev / min.)
SINUMERIK 840 Di
Number of NC axes 5
position measuring axes X, U, Z, V
Transducer rotating table
hydraulic power unit:
- Nominal tank capacity of 30 dm3
- Supplied quantity 10 dm3 / min
infinitely variable speed in 4 rows for running left and right:
- Series I. 1-12,5 rev / min.
- II. range 5 to 27 rev / min.
- III. range from 10 to 60 rev / min.
- IV. range from 15 to 122 rev / min.
rychlopusuv:
- Programmed in all slides 5000 mm / min.
- In manual mode 4500 mm / min.
Machine floor space (WxD) 4550x2670 mm
machine height above ground 4630 mm
weight machines, including electric. cabinets and units of about 18500 kg max. diameter of turning left smykadlovým slide 1700 mm
max. distance between the clamping plate and knife holder slide left ram 1250 mm
max. ram extension Left slide in 660 mm
Max. protrusion of the turret slide 550 mm Z
Revolving slide cross travel X 1020 mm
cross travel slide left ram U 980 mm
Clamping plate diameter 1620 mm
max. workpiece weight of about 5000 kg
max. section of the body knife 40x40 mm
Power of main engine control and 30 kW / A 52.3
nominal speed main engine 1475 rev / min.
servomotors lateral displacement X, U 22 Nm -3000 rev / min.
Servomotors strips Z, V 22 Nm -3000 rpm / min.
SERVOSTAR 614 servo inverters
hydroaggregate motor power of 2.2 kW (1450 rev / min.)
SINUMERIK 840 Di
Number of NC axes 5
position measuring axes X, U, Z, V
Transducer rotating table
hydraulic power unit:
- Nominal tank capacity of 30 dm3
- Supplied quantity 10 dm3 / min
infinitely variable speed in 4 rows for running left and right:
- Series I. 1-12,5 rev / min.
- II. range 5 to 27 rev / min.
- III. range from 10 to 60 rev / min.
- IV. range from 15 to 122 rev / min.
rychlopusuv:
- Programmed in all slides 5000 mm / min.
- In manual mode 4500 mm / min.
Machine floor space (WxD) 4550x2670 mm
machine height above ground 4630 mm
weight machines, including electric. cabinets and units of about 18500 kg
GO 2008
 
  116
IDMA30404
MakeO-M
ModelTM2-25/40
YOM
ConditionGood Condition
PhotoSee Photo
Table dia: 2,500 mm
Max swing: 4,000 mm
Vertical height capacity: 2,500 mm
CNC control: FANUC 0T
Available sub-table size 4,000 mm
ONLY one ram controlled by CNC
 
  117
IDMA30346
MakeWMW Niles ,Germany
ModelDKZ4000x2000B
YOM1967 Retrofit CNC 2009
ConditionGood Condition
PhotoSee Photo
Face plate diameter: 3500 mm,
Max. turning height: 2000 mm,
Max. turning diameter: 4000 mm,
Ram: 2 pieces,
max. travel: 1400 mm,
Max. table load: 25 ton,
Speed face plate: 1-30 rpm,
Machine weight: 66 ton,
Power: 63 kW,
Dimensions L/W/H: 13600 x 9800 x 6750 mm,
Control: Siemens 802 D
 
  118
IDMA30339
MakeSchiess Froriep
Model12DS
YOM1990
ConditionGood Condition
PhotoSee Photo
Plate diameter : 1000 mm,
Fagor.
 
  119
IDMA30193
MakeStanko-Russia
Model1540
YOM1976 / Retrofit 2008
ConditionVery good condition
PhotoSee Photo
Machining diameter : 7100,
Passage between amount : 8000 mm,
Height under through : 5650 mm,
Ram travel: 2750
Cross race : 2750 mm,
Maximum load : 180 tons,
2 x NUM : 1060,
Speed : 19 rpm,
Power : 125 Kw.
 
  120
IDMA30137
MakeSchiess,German
Model
YOMRetrofited in 2001
ConditionGood Condition
PhotoSee Photo
Faceplate diameter : 2,500 mm,
Circulation diameter : 3.150 mm,
Rotating height : 1.600 mm,
Tool holder VDI : 50 / MK,
Ram stroke Max. : 880/950 (R / L) mm,
Arm swiveling +/- yes,
Horizontal adjustment of the ram support : 1,700 / 1,700 (R / L) mm,
Max. Workpiece weight : 20 t,
Power requirement : 70 kW,
Accessories :-
Grinding spindle for the right support with direct measuring system,
manual cross bar adjustment,
Four clamping claws for the faceplate, control console height-adjustable and swivelable, oil cooler for the gearbox,
Hydrostatic bearing, documentation.
CNC control for the left Arm FAGOR 8055T.
Two - axis digital display, Fabr. Axesta , for the right Arm.
 
  121
IDMA30128
MakeChinese
ModelCK5263
YOM
ConditionGood Condition
PhotoSee Photo
Max Swing : 6300 mm,
Max Working piece height : 3800 mm,
Max load : low speed 8PRM or lower 63T,
Full speed : 25 t,
Table turning speed : 0.34-25.4 rpm/min,
Max torque : 225 kN﹒m,
Dia. Of table : 5700 mm,
Max ram travel : 2000 mm,
Max tool holder travels : 3590 mm,
Swing of the tool holder : -15°~+30°,
Dimension of the tool holder : 60 × 60 mm,
Max cutting force Right tool holder (L-750) : 80 KN,
Left tool holder (L is the distance between tool tip to tool holder) (L-750) 63 KN,
Feeding speed range for the tool holder : 0.13-352 mm/min,
Rapid speed of the tool holder : 1920 mm/min,
Travel of the horizontal slide : 3610 mm,
Speed of the horizontal slide : 230 mm/min,
Power of main motor : 100 KW,
Dimension of this machine : 6525×14950×9960 mm,
Weight : 188 T.
CNC system Siemens 802D.
 
  122
IDMA30114
MakeOM
ModelVC-6NT
YOM1997
ConditionGood Condition
PhotoSee Photo
Max OD: 630 mm,
Max swing: 800 mm,
Work height: 500 mm,
Weight on table: 300 Kgs,
ATC-6
Table: 15-1000 rpm,
Control: F-21iT
 
  123
IDMI6635
MakePensotti,Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Power Chuck: 900mm
Swing:1100 mm .
Cutting height. Elevating rail: 700mm
CNC Control
 
  124
IDMA30105
MakeHwacheon
ModelVTM2000
YOM2011
ConditionGood Condition
PhotoSee Photo
Max Swing : 2650 mm,
Max Working Die : 2500 mm,
Max Working length : 2100 mm,
Max Loading capacity : 15 ton,
Table size : 2000 mm,
Rpm : 1-240,
Max Torque : 49,862 (5,085 kgf),
X axis : 315-1,835 mm,
Z axis : 1,000 mm,
W axis : 1,100 mm,
Moving speed ( X/Z/W) : 10/10/10m/min,
Cutting speed(X/Z/W) : 1-2000 mm/min,
Table main motor : 75 kw,
Milling main motor : 18.5 kw,
Moving motor (X/Z/W) : 5.5/5.5/5.5 kw,
Chip conveyor,
Control system : FANUC Series 31i-MODEL A?
 
  125
IDMA30098
MakeOM
ModelVC-6NT
YOM2000
ConditionGood Condition
PhotoSee Photo
Max OD: 630 mm,
Max swing: 800 mm,
Work height: 500 mm,
Weight on table: 300 Kgs,
ATC-6
Table: 15-1000 rpm,
Control: F-21T
 
  126
IDMA30061
MakeTos Czech
ModelSK16
YOM1977/2002
ConditionGood Condition
PhotoSee Photo
The biggest turning diameter 1620 mm with side support 1700 mm with cross slide support
Distance from the greatest height from the mounting plate
The ram crosspiece 1380 mm slides
To the knife holder lateral slide mm 1000
The vertical movement of the crossslide 950 mm
Clamping plate diameter 1620 mm
Workpiece weight kg 5000
Electric motor to drive the clamping plates 37 kW
Machine dimensions: width x depth x height mm 4550 x 2700 x 4730
Machine weight ca. kg 18500
Machine is still under power till end of the year than will be dismantled,
Control: Sinumeric 810D
 
  127
IDMA30006
MakeJungenthal,Germany
Model
YOM1995
ConditionGood condition,under power
PhotoSee Photo
Faceplate diameter 2000 mm
max. Swing diameter 2500 mm
Turning height 2000 mm
Faceplate speeds from - to .63 - 250 rpm
Crossbar adjustment - vertical 1000 mm
Chisel travel Vertical 750 mm
Chisel travel horizontal 1420 mm
Main drive motor 75 kW
Workpiece weight 16 t
Total power requirement 125 kW
Machine weight approx. 36 t
- 2 Rams
- Chip conveyor
Control: Siemens 840 C
 
  128
IDMA29999
MakeTitan Romania
ModelSC43
YOM
ConditionGood Condition
PhotoSee Photo
Turning diameter max. : 4.300 mm;
Workpiece height max. : 2.000 mm;
Workpiece weight : max. 18 tons;
Table :-
Diameter : 4.000 mm;
Speeds range for turning : 1 - 70 rpm;
Main motor : 55 kW;
Cross rail :-
Vertical travel : 1.500 mm;
Rapid feed speed : 400 mm/min;
Turning head no. 1(left) :-
Vertical ram travel (Z axis) : 1.100 mm;
Feeds range (infinitely variable) : 10 - 5.000 mm/min,
Rapid feed speed : 6.000 mm/min,
Turning head no. 2 (can be manual tilting) :-
Vertical ram travel (Z axis) : 750 mm;
Feeds range (infinitely variable) : 10 - 5.000 mm/min.;
Rapid feed speed : 6.000 mm/min.;
Head tilting : +/- 30 degree;
Power supply : 380 V;
Frequency : 50 Hz;
Installed power : 85 kW;
Machine overall dimensions :-
Length : 8.700 mm;
Width : 6.000 mm;
Height : 5.500 mm;
CNC Equipment Siemens SINUMERIK 802Dsl.
 
  129
IDMA29916
MakeTos Hulin
ModelSKIQ12CNCB
YOM1990
ConditionGood Condition
PhotoSee Photo
Work piece's heihgt: 1335 mm,
Work piece;s diameter: 1500 mm,
Capacity: 12000 kg,
Dimensions: 5350 x 5240 x 5520 mm,
Weight: 27200 kg,
Control: CNC Cincinati
 
  130
IDMA29802
MakeGiddings & Lewis
Model
YOM
ConditionGood Condition
PhotoSee Photo
5-Axis
Table Diameter: 72"
Table Motor: 60 HP
Maximum Swing: 84"
Height Under Rail: 72"
Ram Stoke With Live Spindle: 50"
Ram Spindle Taper: 60
Ram Tool Changer: 45 ATC
Side Head Taper: 50
Side Head Tool Changer: 16 ATC
-EQUIPPED WITH-
Moveable Rail
Part Probe
Tool Probe
 
  131
IDMA29798
MakeSchiess,German
Model20DKE160
YOM1982
ConditionVery good condition
PhotoSee Photo
Swing diameter: 2000 mm,
Table diameter: 1800 mm,
Distance between table and floor: 910 mm,
Total height of machine: 4550 mm,
Table load capacity: max 12 t,
Torque: max 2600 kpm,
Rotational speed table: 200 rpm,
Crossbeam:
Vertical travel of crossbeam: 900 mm,
Vertical feed of crossbeam
Feed rate: 3,4 mm/min,
Rapid feed: 450 mm/min,
Carriage of crossbeam, right
Outer diameter of work piece roatation: max 1800 mm,
Height rotation work piece below normal tool position:max 1075 mm,
Distance between table and head stock: 1255 mm,
Vertical travel of head stock: max 675 mm,
Horizontal travel head to the right (from table centre): max 1120 mm,
Horizontal travel head to the left: max 130 mm,
Surface of head stock, dimensions: 400 x 400 mm,
Lathe tool- square dimensions: 40 x 40 mm,
Cross slide: 0-3000 mm/min,
Feeds fast: 3000 mm/min,
Main motor power: 55 kW,
Control: CNC Siemens 810
 
  132
IDMI6593
MakeBerthiez France
ModelTM200
YOM1980
ConditionGood Condition
PhotoSee Photo
Max cutting height : 3500 mm,
X Axis stroke : 2240 mm,
Z Axis stroke : 1180 mm,
Table Dia : 4000 mm,
V Axis stroke (Table movement) : 2000 mm,
Ram size : 224 x 224 mm,
Table max load : 100 T,
Max swing : 8200 mm.
CNC 840D.
 
  133
IDMA29783
MakeSchiess,German
Model80DV33-750/800/1200-800/400
YOM1978/2008
ConditionGood Condition
PhotoSee Photo
Diameter of a work piece, max :-
The frame is max. front position : 8000 mm,
The frame is max. back position : 12000 mm,
Mass of a work piece : 400 tons,
Diameter of a disk chuck of a table : 7500 mm,
Travels :
Z1-axis : 3200 mm,
Z2-axis : 5800 mm,
X1-axis : 4100 mm,
X2-axis : 2800 mm,
U-axis : 1250 (PF2500)/ 750 (PF1500),
W-axis,
C-axis,
Mass of VTL approx : 650 ton.
CNC : Siemens Sinumerik 840.
Modernization:
The purpose of modernization consisted in the following: to make capital repairs of mechanical and hydraulic parts of the machine and to completely update electromanagement, at the same time the volume of functions of the machine is expanded planimetric and 3rd coordinate milling with use of the programmable faceplate and a side support.
1. Repair work.
1.1 Basis and faceplate:
• Processing of guides.
• Repair of tightening elements with replacement of worn-out details.
• Repair of a gear wreath of the faceplate.
• Repair of a support of the faceplate and replacement of bearings.
• Repair of a reducer of the main drive with replacement of worn-out details and bearings.
1.2 Rack, rack basis:
• Basis exhibition.
• Processing of guides.
• Repair of the driving mechanism of movement of a rack with replacement of worn-out details.
• Repair of the running screw of movement of a rack with replacement of a nut.
• Repair of gear laths of movement of a side support.
• Repair of tightening elements with replacement of worn-out details.
• Repair of adjusting and maple levels.
• Replacement of scrapers.
1.3 Cross-piece:
• Mechanical completion of guides.
• Repair of the driving mechanism of movement of a cross-piece with replacement of worn-out details.
• Repair of the running screw of movement of a cross-piece with replacement of a nut.
• Repair of gear laths of movement of a vertical support.
• Repair of tightening elements with replacement of worn-out details.
• Repair of adjusting and maple levels.
• Replacement of scrapers and a garmonikoobrazny cover for protection of guides.
1.4 Vertical support:
• Processing of guides.
• Repair of driving mechanisms of movement of a support and vertical the reztsovykh of a sled with replacement of worn-out details.
• Repair vertical reztsovykh of a sled.
• Replacement of the ball running screw and nut.
• Replacement of roller boots.
• Repair of adjusting and maple levels.
• Repair of tightening elements with replacement of worn-out details.
• Repair of unloading cylinders.
• Repair of the driving mechanism of a milling spindle with replacement of worn-out details, configuration change (the electric motor – a reducer) and modernization of sealing knot.
• Repair of a power shaft of a milling spindle.
• Replacement of scrapers.
1.5 Side support:
• Processing of guides.
• Repair of driving mechanisms of vertical movement of a support, horizontal movement of a horizontal sled and horizontal movement the reztsovykh of a sled with replacement of worn-out details.
• Repair horizontal reztsovykh of a sled.
• Repair of adjusting and maple levels.
• Replacement of ball running screws and nuts.
• Repair of tightening elements with replacement of worn-out details.
• Replacement of roller boots.
• Repair of the unloading cylinder.
• Repair of the driving mechanism of a milling spindle with replacement of worn-out details.
• Repair of a power shaft of a milling spindle (face teeth and fastenings of the processing heads).
• Replacement of scrapers.
• Replacement of a chain of a counterbalance.
1.6 Hydraulics:
• Replacement of pumps, hydroaccumulators and other elements of hydraulic system by modern analogs.
• Replacement of all rubber products (sealing rings, cuffs, sleeves, etc.)
1.7 The processing heads:
• Repair with replacement of worn-out details of heads.
1.8 Cooling system:
• Repair with replacement of worn-out details.
1.9 Auxiliary mechanisms:
• Repair of the platform of the operator, replacement of a chain and cable.
• Repair of a waist, replacement of a cable.
1.10 Modernization of electric equipment:
• Replacement of a control system of R&D and ChPU Kongsberg, and also all electronics by one ChPU Sinumerik 840D system.
• To provide display of information on the rack display in Russian.
• Programming has to be carried out as in rectangular, and polar system of coordinates with use of function of linear and circular interpolation.
• Replacement of electric motors of the main drive and milling drives.
• Replacement of all electric motors of giving.
• Replacement of all cables and power electric chains and chains of management with replacement of demountable connections.
• Replacement of the main drive and all drives of giving.
(sealing rings, cuffs, sleeves, etc.)
 
  134
IDMA29663
MakeHonor Seiki
ModelVL-125CM
YOM2014
ConditionGood Condition
PhotoSee Photo
Max. swing dia: 1600 mm,
Max. cutting height: 1250 mm,
Table dia: 1250 mm,
Max. table load: 50000 KGS,
Spindle speed: 3-300 rpm (stepless),
Live tool spindle (sub-spindle) speed: 50-2250 rpm,
Cross moving travel: 800 mm (200 mm* 4steps) (Up and down),
24 ATC,
BT50,
X axis travel: 1150 mm (L 200 + R950 mm),
Z axis travel: 900 mm,
Control: Fanuc 0i T
With chip conveyer,
Oil skimmer,
ZF gerabox for sub-spindle,
Renishaw OMP60 tourch probe,
Tool setter (metrol H4A),
90 degree head.
 
  135
IDMA29634
MakeHessapp
ModelDV60/1000
YOM1995
ConditionGood Condition
PhotoSee Photo
Max. turning dia: 650 mm,
Max. swing dia: 700 mm,
Max. turning length :600 mm,
Stroke of vertical slide: 600 mm,
Stroke of horizontal slide: 600 mm,
Spindle dia in front bearing: 160 mm,
Spindle head acc. to DIN 55021 Size A 11,
Spindle turning speed range N1 23 – 750 rpm,
Spindle turning speed range N2 90 – 3000 rpm,
Feeds 0.5 – 5000 mm/min,
Rapid traverse Max: 10000 mm/min,
Main motor: 60 kW,
Total power requirement: 80 kW,
Weight approx.:9000 kg,
Control: CNC 840d
 
  136
IDMA29580
MakeWuhan,Chinese
ModelCD5280Ex60/200
YOM
ConditionGood Condition
PhotoSee Photo
Max working diameter : 8000 mm,
Table size : 7100 mm,
Working height : 6000 mm,
Table load : 200 tone,
With complete C axis,
CNC system : Siemens 802D,
 
  137
IDMA29478
MakeTos Hulin
ModelSKIQ8B
YOM1991
ConditionGood Condition
PhotoSee Photo
Swing: 1000 x 630 mm,
Table dia: 800 mm,
Work piece weight: 2500 kg,
Main motor: 40 kW,
ATC 15 position,
Weight of machine: 16 ton,
Control: CNC Fanuc Oi-TC
 
  138
IDMA29376
MakeSchiess,German
Model16DKE
YOM
ConditionGood Condition
PhotoSee Photo
Table: 1.25 mm,
Turning diameter (Facing): 1.6 mm,
Control: Osai
 
  139
IDMA29349
MakeTakisawa,Japan
ModelTK2-CNC
YOM1988
ConditionGood Condition
PhotoSee Photo
Chuck size : 8 inch,
Max Worksize : 400, Length : 320,
X axis travel : 400,
Z Axis travel : 320,
Main axis : 160-3200 rpm,
X axis traverse : 12000 mm/min,
Z axis traverse : 16000 mm/min,
Motor : AC / 7.5Kw,
X axis : F-Model,
Z axis : F-Model 10,
Chip Conveyor.
2 axis control FANUC 0T.
Qty : 2 nos.
 
  140
IDMA29333
MakeHonor Seiki
Model
YOM
ConditionGood Condition
PhotoSee Photo
Size: 1600 mm,
With: C axis,
Control: OITC
 
  141
IDMA29332
MakeHonor Seiki
Model
YOM2009
ConditionGood Condition
PhotoSee Photo
Size: 1250 mm,
With live tool c axis
Control: Fanuc 18ITB
 
  142
IDMI6439
MakeDiedesheim
ModelVFS40
YOM
ConditionGood Condition
PhotoSee Photo
Chuck diameter: 400 mm,
Max. turning diameter:450 mm,
Max. turning length: 450 mm,
Swing over bed: 500 mm,
Swing over cross slide: 500 mm,
Spindle speed: 3000 RPM,
Tool station:8
Control: Siemens 802C
 
  143
IDMI6370
MakeBullard,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Dia : 800 mm,
Swing : 1000 mm,
X : 1000 mm dia,
Z : 600 mm,
Height : 800 mm,
Chuck Speed : 0 - 200 RPM,
Chuck Speed commendable from CNC,
Turret 5 – station with manual lock,
Automatic lubrication,
Chuck Power 15HP motor,
Complete new wiring with elements / switch gears.
Repeatability / Accuracy : 0.010 mm,
Fully enclosed guards,
Coolant system with tray,
CNC :- Fanuc Oi Mate TD. ,
 
  144
IDMI6361
MakeSchiess,German
Model13EK150
YOM1958
ConditionGood Condition
PhotoSee Photo
Maximum cutting diameter: 1650 mm,
Maximum cutting height: 575 mm,
Maximum height under the crosspiece: 1300 mm,
Table diameter: 1600 mm,
Tool post with 5 tool attachement,
Control: Sinumerik 802 D
 
  145
IDMA28774
MakeTos Czech
ModelSKQ8NC
YOM1980
ConditionGood Condition
PhotoSee Photo
Swing : 800 mm, (face turning 1000 mm)
Turning height of workpiece : 720 mm (between head and table 835 mm),
Table load : 2500 kg,
Table revolutions between : 4-400,
Main motor : 30 kW,
Dimensions : Width 3360 x Depth 2500 x Height 4520 mm,
Weight : 12000 kg.
Chip conveyor.
15 to 20 tool holders.
to system TESLA NS421 added system TRANS from MEFI.
 
  146
IDMI6357
MakeKirloskar,India
ModelDynacut
YOM
ConditionGood Condition
PhotoSee Photo
Chuck dia : 900 mm,
Swing : 1100 mm,
Height : 800 mm,
With coolant pump and stablizer.
Fanuc oi mate T D system x and z axis brand new.
Spindle servo motor fanuc 40P A06b series with 440 volts transformer.
 
  147
IDMI6356
MakeTitan Romania
ModelSC17
YOM
ConditionGood Condition
PhotoSee Photo
Table : 1500 mm,
Swing : 1700 mm,
Height : 1350 mm,
Retrofitted with Fanuc on 2012.
 
  148
IDMA28753
MakeYouji,Taiwan
ModelYV1600ATC
YOM
ConditionGood Condition
PhotoSee Photo
Maximum diameter:2000 mm,
Maximum swing:1800 mm,
Table dia: 1600 mm,
ATC:12
 
  149
IDMI6344
MakeStanko-Russia
Model3C
YOM
ConditionGood Condition
PhotoSee Photo
Chuck dia: 1150 mm,
Swing dia: 1300 mm,
X travel:1200 mm,
Z travel:700 mm,
Height:900-1000 mm,
Chuck speed:0-150 RPM,
Chuck speed commendable from CNC,
Turret 5 station with manual lock,
Automatic lubrication,
Chuck power 30 kw motor,
Complete new wiring with elements /switch gears,
Repeatability /accuracy 0.10 mm,
Control:Fanuc Oi Mate TD
 
  150
IDMA28731
MakeMazak,Japan
ModelMEGATURN A12N M-C
YOM
ConditionGood Condition
PhotoSee Photo
Max swing : 1450 mm,
Max diameter : 1350 mm,
Mazatrol T3.
 
  151
IDMA28730
MakeOkuma,Japan
ModelVTM120YB
YOM2007
ConditionGood Condition
PhotoSee Photo
Max swing : 1500 mm,
Max diameter : 1200 mm,
OSP LGi.
 
  152
IDMA28729
MakeHomma
ModelTAC12M
YOM1998
ConditionGood Condition
PhotoSee Photo
Max swing : 1600 mm,
Max diameter : 1250 mm,
Fanuc 18TC.
 
  153
IDMA28719
MakeOkuma,Japan
ModelV100R
YOM2008
ConditionGood Condition
PhotoSee Photo
Max. working diameter: 1000 mm
Max. outline diameter: 1250 mm
Max. working height: 890 mm
Max. load weight: 1200 kg
Spindle capacity: 110 mm
Speed:
High-Speed: 8-750 rpm
Low-speed: 4-396 rpm
ATC-12
Machine floor space: 2725 x 3495 mm
Machine height: 3495 mm
Machine weight: 13000 kg,
Control: OSP-P200L
 
  154
IDMA28718
MakeOkuma,Japan
ModelV100R
YOM2007
ConditionGood Condition
PhotoSee Photo
Max. working diameter: 1000 mm
Max. outline diameter: 1250 mm
Max. working height: 890 mm
Max. load weight: 1200 kg
Spindle capacity: 110 mm
Speed:
High-Speed: 8-750 rpm
Low-speed: 4-396 rpm
ATC-12
Machine floor space: 2725 x 3495 mm
Machine height: 3495 mm
Machine weight: 13000 kg,
Control: OSP-P200L
 
  155
IDMA28711
MakeGray
ModelRM80
YOM1987
ConditionGood Condition
PhotoSee Photo
Table diameter : 1219 mm,
Maximum swing : 1422 mm,
Max height under rail : 1219 mm,
Maximum height under turret face : 1346 mm,
Turret stroke : 762 mm,
Turret horizontal travel : 1524 mm,
Table speeds variable : 4.9-287 RPM,
Machine Electrics : 460/3/60,
Overall height : 4115 mm,
Weight : 21331 Kg.
Equipped with :
GE 2000 CNC control,
4-Position Power indexing turret,
1219 mm T-Slotted face plate,
Ball screws & independent drives,
Power rail elevation,
Power rail clamp,
Misc tooling,
Flood Coolant,
Chip conveyor,
Chip & Splash Enclosure,
Main motor : 56 Kw.
 
  156
IDMA28704
MakeJSW,Japan
ModelLT15
YOMRetrofit in 2010
ConditionGood Condition
PhotoSee Photo
Table dia: 4250 mm,
Max. work dia: 6300 mm,
Height: 4200 mm,
Between column: 6500 mm,
Dual pendant operated controls Z axis: 2600 mm,
Control: Fanuc 32iA
 
  157
IDMA28686
MakeSedin Russia
Model1A516MF3
YOM1988
ConditionGood Condition
PhotoSee Photo
dia 1600mm,height 1250 mm faceplate dia 1400 mm, max. mass of workpiece 15 tons, max. height of cutting tool section 50 mm, max. stroke of carriage slide 800 mm, no. of tools nests in the magazine 10, faceplate speed (stepless control) 0.8-278 RPM, carriage working feed on each axis:(stepless control): 0.01-100 mm/rev, max. rate of carriage positioning traverse 6000 mm/min., max. cutting force 5 tons, max. faceplate torque 35 kN-m, power of main drive 55 kW, sound level at operators position 80 dB, discreteness of point to point traverse 0.001 mm, weight 27 tons,
 
  158
IDMA28685
MakeSchiess,German
ModelKZ250
YOM1958 / 2009
ConditionGood Condition
PhotoSee Photo  |  See Video
Max. turning diameter : 2600 mm,
Max. turning height : 1545 mm,
Table Diameter : 2500 mm,
Ram : 1050 mm,
Speed range : 1145-605 U/min
Max. table load : 6000 kg,
Machine size L x W x H : 5200 x 3750 x 5300 mm,
Machine weight ca. : 35 to.
SIEMENS 820 T Control in 1995.
 
  159
IDMA28684
MakeBerthiez France
ModelJA9340
YOM1960 Retrofitted 2000
ConditionGood Condition
PhotoSee Photo
Table diameter :2200 mm,
Max. turning diameter : 2800 mm,
Table speed : Maxi 125 rpm 6 ranges,
Max. turning height : 2000 mm,
CNC Control : NUM 1060.
 
  160
IDMA28668
MakeRussian
Model1516F3
YOM1985
ConditionGood Condition
PhotoSee Photo
Max. diameter of working : 1600 mm,
Max. working height : 1000 mm,
Face plate diameter : 1400 mm,
Max. weight of work piece : 6300 kg,
Dimensions : 4510 x 3810 x 5615 mm,
Weight : 19000 kg,
Control : Artech NC control NS-210.
 
  161
IDMA28659
MakeKomatsu
ModelGVH500
YOM2000
ConditionGood Condition
PhotoSee Photo
Table diameter : 1250 mm, (2 Pallets),
Max turning diameter : 1600 mm,
Max turning height : 1340 mm,
Milling : RPM - 12.5-2000,
Taper : NT50,
Spindle (B axis) indexing degrees : 0.001,
Motor : AC11/15 kW,
Table :-
RPM : 2-360,
C axis indexing degrees : 0.001,
Motor : AC 30 /37 KW,
ATC : 48 stations,
Controller Fanuc 180i.
 
  162
IDMA28657
MakeO-M
ModelTDC12N
YOM1991
ConditionGood Condition
PhotoSee Photo
Max Turning diameter : 1600 mm,
Table : 1250 mm,
Max Turning height : 940 mm,
Milling :-
RPM : 20-1200,
Taper : NT50,
Motor : AC11/15KW,
Max drill diameter : 50 mm,
Table :-
RPM : 2-300 mm,
C axis indexing speed : 4RPM,
Motor : AC30/37 KW,
ATC for cutting 8 stations for turning 16 stations.
 
  163
IDMA28650
MakeSchiess,German
Model16DSC-125P
YOM1988
ConditionGood Condition
PhotoSee Photo
Face plate diameter: 1250 mm,
Diameter of processing: 1600 mm,
Length of processing: 1460 mm,
Work piece weight: 8000 kg,
Table length: 1250 mm,
Z axis travel: 1400 mm,
Control: CNC Fanuc.
 
  164
IDMA28647
MakeKolomna Russia
ModelKU428F1
YOMRecondition 2013
Conditionexcellent working condition
PhotoSee Photo
Working maximum diameter : 5000 mm,
The maximum height : 3200 mm,
Faceplate diameter : 5000 mm,
Calliper occurrence of the maximum angle : -15 ° to + 30 °,
Faceplate placed on maximum product weight : 125000 kg,
Table speed range : 0.27 to 24.8 min-1,
Feed range from 0.0352 to 285 mm / min,
Main motor power : 180 kW,
Height above floor level : 8300 mm,
Number tool holder : 2,
Dimensions Length : 7300 mm,
Width : 12900 mm,
Height : 9800 mm,
Weight : 190,000 kg.
Recondition 2013 with new ball screws & spindle.
 
  165
IDMA28555
MakeKolomna Russia
Model1563
YOM1963
Conditionexcellent working condition
PhotoSee Photo
Table Diameter : 6300 mm,
Column to Column : 6300 mm,
Height from table to cross rail : 3690 mm,
Height from table to tool holder : 3550 mm,
Machine Weight : 223 Tons.
Max work load : 125 Tons,
Max work Height : 4000 mm,
Max work diameter : 6300 mm,
Ram Stroke : 2000 mm,
Min work hole diameter : 400 mm,
Ram size : 310 mm X 350 mm,
Ram angle [inner/outer] : 30/15 deg,
Table rotation speed : 4 X stepless 0.3 TO 25 RPM,
Cutting feed speed [X-axis] : stepless : 0.04 TO 285 mm/min,
Cutting feed speed [Z-axis] : stepless : 0.04 TO 285 mm/min,
High speed feeder [X-axis] : 2400 mm/min,
High speed feeder [Z-axis] : 2400 mm/min,
Machine Size : 14200 X 8200 X 9800 mm,
Machine gross wight : 223 tons.
Control : CNC System,
Drives of with Ball screw.
2 Grinding Heads.
 
  166
IDMA28396
MakeTitan Romania
ModelSC22
YOM1986 Retroffited in Germany 2009
ConditionExcellent condition,under power
PhotoSee Photo
Turning diameter: 2200 mm,
Table diameter: 2000 mm,
Turning height: 1900 mm,
Table load: 15000 kg,
Speed: 140 1/min,
Tool changer: 12,
Drive power: 55 kW,
Weight: 33000 kg,
Control: Fanuc Oi-TD
 
  167
IDMA28388
MakeDorries Germany
ModelCTE3000-4500
YOM1982 / Retrofitted 2008
ConditionGood Condition
PhotoSee Photo
Table dia: 3000 mm,
Swing dia: 4500 mm,
Turning height: 2650 mm,
Ram travel: 1450 mm,
Ram size: 250 x 250 mm,
Max. job weight: 25 ton,
Control: CNC Sinumerik 840D,
With ATC
 
  168
IDMA28382
MakeHessapp
ModelDV120
YOM1999
ConditionVery good condition
PhotoSee Photo
Face plate diameter : 1200 mm,
Turning Diameter : 1000 mm,
Swing Diameter : 1250 mm,
Turning Height : 1000 mm,
Main Spindle :-
Cylindrical spindle taper – diameter : 640 mm,
Spindle diameter front bearing : 500 mm,
Spindle speed 1. gear step : 3,15 – 112 min-1,
Spindle speed 2. gear step : 12,5 – 450 min-1,
Power : 63 kW,
Cross slide :-
Total travel X-axis : 1400 mm,
Travel X-axis from spindle centre to the left side : 1022 mm,
Travel X-axis from spindle centre to the right side : 378 mm,
Travel Z-axis : 700 mm,
Ram stroke (stroke extension) Z-axis : 300 mm,
Ram section 220 x 217 mm,
Rapid feed X- and Z-axis : 14000 mm/min,
Tool magazine :-
Number of tools : 40,
Tool taper DIN 69880 VDI 60,
Tool length max. : 380 mm,
Tool weight max. : 35 kg,
Machine dimensions L x W x H ca. : 10,8 x 4,2 x 4,2,
CNC Control SINUMERIK 840 C.
Machine weight ca. : 22 ton.
Accessories :-
Manual face plate ø 1.200 mm, hydraulic clamping cylinder for additional power chuck, vertical
stroke extension Z-axis-hydraulical, the working position are in both end positions in clamped
state, chip conveyor, without coolant tank (has been connected on a central coolant).
Qty : 3 nos.
 
  169
IDMI6287
MakeRussian
Model1512
YOMRetrofit 2013
ConditionGood Condition
PhotoSee Photo
Face plate diameter : 1120 mm,
Swing diameter : 1250 mm,
Turning height : 1000 mm,
work piece weight : 6300 kg,
Face plate speed from - to : 31,5 - 250 U/min,
Total power requirement : 30 kW,
Dimensions of the machine ca. : 2,4 x 2,9 x 3 x 9 m,
Weight of the machine ca. : 16,5 ton.
Control : Siemens 802D CNC control.
 
  170
IDMA28355
MakeCKD Blansko,Czech
ModelSKJ50-100
YOM1995
ConditionGood Condition
PhotoSee Photo
Table diameter: 4770 mm,
Max swing: 10000 mm,
Max swing to reach center: 6300 mm,
Max turning height: 4300 mm,
Vertical support, 250 x 250 mm, tilting 30° / 30°,
Vertical travel: 2000 mm,
Horizontal travel: 3515 mm,
Horizontal support, 250 x 250 mm, tilting15°/15°
Vertical travel: 2100 mm,
Horizontal stroke: 1600 mm,
Table speeds stepless: 0,5-40 rpm,
Table capacity: 100000 kg,
Table motor: 100 kW,
Table torque: 273 000 Nm,
Live spindle,ISO 50, speeds: 16-630 rpm,
Live spindle torque: 700 Nm,
Live spindle motor: 17,2 kW,
Column travel: 2935 mm,
Crossrail vertical travel: 3350 mm,
Machine weight: 121000 kg,
Angle head ISO50,
Control: siemens Sinumerik 880
 
  171
IDMA28354
MakeFarrel
Model
YOM1971/Retrofitted in 2012
ConditionGood working condition
PhotoSee Photo
Table diameter: 4300 mm,
max. swing: 5100 mm,
Working height under rail: 4300 mm,
Ram movement up and down: 2400 mm,
Main motor: 75 KW,
Control: Fanuc 18T CNC
 
  172
IDMI6286
MakeBerthiez France
Model
YOMRetrofitted in 2014
ConditionGood Condition
PhotoSee Photo
Chuck dia: 1000 mm,
Swing dia: 1250 mm,
Turning height: 600 mm,
Spindle motor: 18/22 KW,
Spindle speed: 600 RPM,
Ball screw: Haiwin Grovnd
Control: Mitsubishi M70 CNC
 
  173
IDMA28340
MakeMorando
ModelVLN14
YOM1985
Conditionworking condition ,under power
PhotoSee Photo
Table size: 1450 mm,
Swing dia: 1730 mm,
Height under cross slide: 1300 mm,
Cross slide rise and fall: 900 mm,
Ram rise and fall: 950 mm,
Cross traverse: ram 1250 mm,
Input: 69.5 kW,
Fitted with: 12 station automatic tool changer and renishaw probe,
Equipment: 11 x tool holders,
Control: Simens Sinumeric
 
  174
IDMA28322
MakeTitan Romania
ModelSC33
YOM
ConditionGood Condition
PhotoSee Photo
Table Dia : 3000 mm, Max turning dia : 3300 mm, Max height of work piece : 2300 mm, Max Weight of the work piece : 18,000 kgs, Table speed range : 1.02-92 RPM, Working feed range : 0.05-5 mm, Rapid traverse : 2500 mm, Main motor power : 55 kW, Overall dimensions : 5600 x 5300 x 5400 mm, Weight of the machine : 47350 kg, Control: Fagor
 
  175
IDMA28319
MakeHessapp
ModelDV42-2
YOM1993
ConditionGood Condition
PhotoSee Photo
Swing diameter : 500 mm,
Turning diameter : 400 mm,
X-stroke : 350 mm,
Z-stroke : 400 mm,
Turret with 4-station,
Max. workpiece weight : 500 kg,
Spindle speed range : 50/ 710/ 1800 rpm,
Driving power : 2/ 29/ 29 kW,
Rapid traverse max. : 14,000 mm/min.,
Machine weight : 22,000 kg,
Control system : Siemens
 
  176
IDMA28284
MakeFroriep German
ModelKZ310-350-360
YOM1967 (Retrofit 1989)
ConditionGood Condition
PhotoSee Photo
4Jaw face plate: 3100 mm,
Max swing: 3600 mm,
Max height: 3600 mm,
Ram head travel: 2200 mm,
Vertical rail travel: 3000 mm,
Max. load: 35 ton,
R.P.M.: 0,32-40,
HP: 85,
Cycles: 50
Control: Fagor 8035,
Including:
2 x ram head 250 x 250 mm,
Chip conveyor,
Mist extraction unit,
Coolant system.
 
  177
IDMA28281
MakeDoosan
ModelPuma V550
YOM1982
ConditionGood Condition
PhotoSee Photo
Rolling diameter on the desk : 800 mm,
Max. turning diameter : 730 mm,
Max. turning height : 750 mm
Junction ASA : 11,
Speed rotation rpm : 20-2000,
Power AC motor (cont./30min.) : 30/37 kW,
Control :Fanuc 21I-TB.
 
  178
IDMA28276
MakeSedin Russia
Model1A512MF3
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Max workpiece diameter : 1250 mm,
Max workpiece height : 1250 mm,
Faceplate diameter : 1120 mm,
Max table load : 10000 kg,
Stroke of carriage slide : 800 mm,
ATC 10 tools,
Faceplate speed stepless : 1 – 335 rpm,
Mainspindle power : 55 kW,
Total weight : 26 ton,
Controller SIEMENS 840 D retrofitted.
With new electro cabinet.
New wiring.
New servo drives.
Measuring system HEIDENHAIN.
 
  179
IDMA28275
MakeKolomna Russia
Model1532T
YOM1990 Rebuilt in 2003
ConditionVery good condition,Under power
PhotoSee Photo
Faceplate diameter : 3200 mm,
Turning diameter : 3200 mm,
Max. workpiece height : 2000 mm,
Max. workpiece weight : 40 Ton,
Turning speed : 4-62 rpm (4 ranges),
Main motor power : 75 kW,
Crossrail vertical travel : 1873 mm,
Horizontal Ram travel : 1960 mm (both),
Saddle vertical travel : 1250 mm (both),
Weight of the machine : 93,000 Kg,
CNC Fagor 8025 T-I (2 control units).
Additional information :-
Full enclosed guarding, 2 slides individually controlled by CNC .
 
  180
IDMA28272
MakeFroriep German
Model200-63KZ1000-1500CNC
YOMRefurbished in 1999
ConditionGood Condition
PhotoSee Photo
Face plate diameter: 10000 mm,
Swing diameter: 15000 mm,
Turning height: 5000 mm,
Max. ram stroke: 2000 mm,
Face plate turning speed range: 0,13-13 U/min,
Work piece weight: 200 ton,
Feed per revolution: 3 mm,
Rapid traverse: 1630 mm/min,
Vertical feeds: 0,00196-40 mm/U,
Feed range-Horizontal: 0,00196-40 mm/U,
Table drive: 186 kW,
Cross rail motor: 30 kW,
Cross rail adjustment: 64 kW
Control: Siemens 840D CNC
Equipped With:
Dual pendant operated controls and dual operators platforms,
2-vertical CNC controlled ram,
4-heavy duty face plate type jaws,
Hydrostatic bearing system for table,
Dual chip conveyors.
 
  181
IDMA28157
MakeRafamet Polish
Model
YOMRetrofitted in 2000
ConditionGood Condition
PhotoSee Photo
Table diameter : 1300 mm,
Max. Height : 500 mm,
Max. diameter : 1500 mm,
Control with CNC Siemens Sinumerik 850,
Quantity: 5 nos
 
  182
IDMA28104
MakeSchiess,German
ModelKE160
YOM1970
ConditionGood condition,under power
PhotoSee Photo
Table diameter : 1600 mm,
Swing diameter : 1800 mm,
Height : 1250 mm,
CNC control NUM 1060.
 
  183
IDMA28101
MakeDaewoo Puma
ModelV15-3A
YOM1998
ConditionGood Condition
PhotoSee Photo
Max Swing : 787 mm,
Max Turning Diameter : 637 mm,
Max Turning Length : 640 mm,
Spindle Motor : 40 HP,
Spindle Speed : 2,500 RPM,
Rapid Traverse Rate : X 472 IPM,
Rapid Traverse Rate : Z 630 IPM,
X-Axis Travel : 470 mm,
Z-Axis Travel : 628 mm,
Turret Position : 12,
Live Milling RPM : 2500 RPM,
Machine Dimensions : 3750 x 2600 x 2900 mm,
Machine Weight : 39,600 lbs.
Equipped With :-
Live Tooling,
375 mm 3-Jaw Hydraulic Chuck,
Auto Lube System,
Boxed Ways,
Chip Conveyors,
RS-232C Port Interface,
C-Axis Table Movement,
Wired 220 Volt Electric,
All Available Manuals.
 
  184
IDMA28020
MakeHessapp
ModelDV120
YOM1992/2009 Recondition
ConditionGood Condition
PhotoSee Photo
Turning diameter: 1400 mm,
Swing diameter: 1450 mm,
Turning height: 950 mm,
Face plate turning speed range-stepless: 2 x 4,5 -630 U/min,
Drive motor: 60,000 kW,
Feed X/Z axis: 1-14000 mm/min,
Rapid traverse X + Z axis; 14 m/min,
Face plate diameter: 1400 mm,
Travel of the vertical slide: 950 mm,
Horizontal stroke: 1400 mm,
C axis: 360,000 x 0,001 degree,
Tool piece turning speed range: 0-3000 U/min,
Tool magazin: 40,
Spindle diameter in front bearing: 500 mm,
Tool taper: DIN 69880-60,
Face plate diameter: 1400 mm,
Total power requirement: 110,000 kW,
Weight of the machine ca: 2500 ton,
Dimensions of the machine ca: 9,50 x 5,00 x H4,80 m,
Control: SIN 840D.
 
  185
IDMA27979
MakeTitan Romania
ModelSC25-33
YOM
ConditionGood Condition
PhotoSee Photo
Face plate dia : 2500 mm plus 4 extension up to 3000 mm dia,
Max. turning dia : 3300 mm,
Height under the cross rail : 1950 mm,
Max. work pcs. weight : 15 to,
Main spindle speed range : 1,24 to 112 RPM,
Main drive motor power : 60 Kw,
Machine weight : 42000 kg.
The machine is completely mechanically retrofitted and supplied with following brand new components:
FANUC 0iD CNC
Brand new electrical cabinet as well control panel with Telemecanique components and SIMOREG (SIEMENS) driver for main motor,
Rexroth or Vickers hydraulic equipment;
Dropsa made oiling system;
Vertical rail head has ball screw on horizontal and vertical travel;
Rotation table has a rotary encoder, being capable for making threads in the middle or outside dia. of the workpiece;
Guideway covers on the cross rail.
All the guideways are new grinded and are applied Turcite on the surface
The machine have the geometrical precision like a new machine.
The machine new painted.
The cross rail is displaced along the high precision guide ways of the columns, driven by an AC asynchronous electrical motor. Counter-guides plated with Turcite (Germany) anti-friction material. Covers for cross-rail guide-ways.
The vertical rail head for turning present the following structure:
The slide - horizontally displaceable along the cross rail guide ways;
The ram (steel made) (1100mm travel) - vertically displaceable inside of the rail head;
The ram is hydraulically balanced.
The feed clutches gear boxes are replaced with brand new planetary speed reducers and servomotors (Mo=12Nm) placed on each ball-screw heads.
 
  186
IDMA27863
MakeSedin Russia
Model1L532
YOM
ConditionDismantled,Good condition
PhotoSee Photo
Table diameter : 2800 mm,
Swing diameter : 3200 mm,
Working height : 1600 mm,
Ram Stroke : 1200 mm,
RPM max : 63,
Main motor power : DC100HP,
Two rams controlled with CNC.
Control : CNC Sentrol2.
 
  187
IDMA27846
MakeHNK Machine Tool-Korea
ModelVTC-20/25
YOMNew in 2010
ConditionGood Condition
PhotoSee Photo
Table size: 2000 mm,
Max. swing : 2860 mm (measured),
Max. working height: 1800 mm,
Ram section: 240 x 240 mm,
Ram stroke: 1000 mm,
Cross rail stroke: 1000 mm (4 step by 250 mm automatic locking system),
Min index angle: 0.001 (36,000 impulses),
Table speed: 200 rpm,
Table motor power: AC 45/55 kw,
Milling spindle speed: 2000 rpm,
Control: Fanuc 18iMB
Accessory Part:
Automatic tool and turning tool holder changer,
Splash guard (door type),
Hinge belt conveyor,
Oil chiller,
Right angle head x 1,
Grinding attachment head x 1,
Turning tool holder x 8 (including coolant nozzle on side of turning tool holder),
Boring bar x 2,
ZF gear box for table unit,
 
  188
IDMA27842
MakeSedin Russia
Model1L532
YOM1989/Overhaul 2008
ConditionGood Condition
PhotoSee Photo
Working Range turning
Turning diameter max: 3200 mm,
Work piece length max.: 1600 mm,
Work piece weight max.: 16000 kg,
Facing Plate (Turning machine)
Diameter of surface plate: 2800 mm,
Spindle revolutions min: 1.25/min,
Spindle revolutions max.: 63/ min,
Drive power max.: 55 kW,
Dimensions/Weights
Total weight approx: 43000 kg,
Retrofit to CNC control in 2008
Only CNC in X and Z axis of right ram,
Siemens 840 D control and servo motor,
Heidenhain measurement,
Ball bearing spindle in X and Z axis,
 
  189
IDMA27827
MakeHessapp
ModelDV80
YOM1989
ConditionGood Condition
PhotoSee Photo
Swing diameter : 800 mm,
Turning diameter : 800 mm,
Chucking diameter : 500 mm,
670/800 mm,
Spindle head : DIN 55021 Größe 15,
Turning speed range : 8 - 1120 U/min,
Feed speeds max. : 1500 mm/min,
Rapid traverse : 5500 mm/min,
Torque max. : 800 kpm,
Total power requirement : 55 kW,
Dimensions of the machine ca. : 4,00 x 3,00 x 3,70 m,
Weight of the machine ca. : 13,5 t.
Control SIEMENS SINUMERIK 810 T.
4 fold tool turret.
Chip conveyor.
 
  190
IDMA27822
MakeKDM
Model
YOMNew in 2012
ConditionGood Condition
PhotoSee Photo
Table size: 1200 mm,
Max.swing: 1600 mm,
Motor power: 37/45 kw,
Automatic tool changer: 12 pcs,
Control: Fanuc 31iMB.
 
  191
IDMA27739
MakeKolomna Russia
Model1580
YOM1976 / CNC Retrofit 2008
ConditionGood Condition
PhotoSee Photo
Table diameter: 7100 m,,
Maximum swing: 8000 mm,
Maximum height under tool holder: 5440 mm,
Maximum height under cross rail: 5650 mm,
Vertical stroke of rams: 2750 mm,
Table speeds: 0 to 19 RPM,
Ram tool block dimensions: 320 x 350 mm,
Ram swivel: +15/-30 degrees,
Table weight capacity metric: 180 tons,
Main motor: 127 KW,
Control: Num 1060 4 Axis CNC,
equipped with:
Elevating operators platforms for each ram,
Dual control stations for each ram,
7100 mm T-slotted table,
4 Heavy duty face plate jaws (780 x 500 mm),
2- Swivelling vertical rams,
Bellow type way covers on cross rail
Power elevating cross rail,
Ball screws and siemens ac servo drives,
195 KW siemens DC table drive motor
 
  192
IDMA27726
MakeMorando
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max working diameter: 4250 mm,
Table diameter: 4000 mm,
Max workingpiece height: 3200 mm,
Max weight admitted on table: 25 ton,
Crossrail travel: 2750 mm,
rapid feedrate: 400 mm/min,
Indexed every: 200 mm,
Vertical head, orizzontal travel: 2750 mm,
Ram section: 250 X 250 mm,
Vertical travel: 1750 mm,
rapid feed rate: 6000 mm/min,
Ram inclination: +/- 30°,
Main power: 55 Kw,
Table speed: 0.92-92 rpm,
Dimensions: 7910 X 6020 X 8200 mm,
Machine weight: 65 tons,
Control: CNC Siemens.
 
  193
IDMA27717
MakeTos Hulin
ModelSKIQ16
YOMOverhauled 2010
ConditionGood Condition
PhotoSee Photo
Face plate : 1600 mm,
Max. swing : 1800 mm,
Max distance between face plate and clamping area slide : 1960 mm,
Max. high on working area face plate to bottom support : 1820 mm,
Max. stroke slide /Z axis : 1000 mm,
Max. work piece high : 1725 mm,
Max. work piece weight : 16000 kg,
Max. crossbar stroke : 1250 kW,
Max. speed face plate : 3,15-315 min-1
Gear steps : 2,
Torque on face plate : 13760 Nm,
Feed
Rapid feed : 8000 min-1,
Feed each rotation up to max.6 m/min 0,01-99,99 min1,
Thread turning : 0,01-99,99 min-1,
Space require : 4270 x 3400 x 6140 mm,
Machine weight : 29200 kg,
Control: Sinumerik 840D,
Connected with possibility of testing.
 
  194
IDMA27692
MakeSedin Russia
Model1E512PF2I
YOM1990
ConditionGood working condition
PhotoSee Photo
Max. dia of workpiece : 1250 mm,
Max. height : 1000 mm,
Faceplate dia : 1120 mm,
Max weight of job: 4 tons
Number of upper supports with turrethead : 1,
Max, upper support travel:
Horizontal : 810 mm,
Vertical : 700 mm,
Max crossrail travel : 660 mm,
Dimensions : 2875 x 2660 x 4100 mm,
Weight of the machine : 16.5 tons.
 
  195
IDMA27666
MakeSchiess Pensotti
ModelNDM160
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter : 1600 mm,
Turning diameter : 2400 mm,
Max turning height : 1800 mm,
Ram vertical travel : 1500 mm,
Y axis table : +1100 mm / -1000 mm,
Max load capacity : 15 ton,
Table rotation speed : 2,4-270 rpm,
Gear number : 2,
Spindle motor power : 75 kW,
Milling spindle speed : 1200 rpm,
Milling spindle motor power : 27 kW,
ATC for turning : 10 pos,
ATC for milling : 30 pos, (ISO 50),
CNC: SIEMENS 840 D ( 2005 )
ACCESSORIES:
1 milling tilting head ( u axis ), 1 angular head 90°, 1 vertical head, 3 cheap conveyors,
high pressure.
 
  196
IDMA27660
MakeSchiess Froriep
Model22DE200
YOM1980/2007
ConditionGood Condition
PhotoSee Photo
Faceplate diameter : 2000 mm,
Swing diameter : 2200 mm,
Turning height : 1750 mm,
Ram head - vertical travel : 1500 mm,
Ram head - cross travel : 1270 mm,
Ram head dimension : 240 x 310 mm,
Cross rail adjustment - vertical : 1250 mm,
Cross rail -rapid travel : 500 mm/min,
Speeds infinitely variable range : 1 1,6 - 40 U/min,
Speeds infinitely variable range : 2 6,3 - 160 U/min,
Max. work piece weight : 15.000 kg,
Feed stepless : 0,1 - 400 mm/min,
Rapid speed : 6000 mm/min,
Total power requirement kW,
Weight of the machine ca. t.
With :-
CNC Siemens 840 D.
Automatic toolchanger 12-pockets.
Chip conveyor, splash guarding.
Diverse tool holders.
 
  197
IDMA27643
MakeKolomna Russia
Model1563
YOM1978 / Retrofitting 2011
ConditionGood Condition
PhotoSee Photo
Table diameter : 6300 mm,
Swing diameter : 6300 mm,
Turing height : 3200 mm,
Ram travel vertical : 2000 mm,
Ram size : 300 x 300 mm,
Main motor : 2 x 60 kW,
Table speed range: 0,17-25.5 rpm,
Milling machine head stock range: 1/2500 rpm,
Cone of milling tool: ISO 50
Max table load : 125 ton,
Machine Weight : 230 ton.
Control : CNC Fagor 8070.
With "C" Axis + ATC.
 
  198
IDMA27641
MakeSchiess,German
Model50DV
YOMRebuilt in 2001
ConditionGood Condition
PhotoSee Photo
Table diameter : 4000 mm,
Swing diameter : 7500 mm,
Max turning height : 5500 mm,
Motor Power : 60 HP,
Motor speed: 96-600-2400 rpm
Ram travel horizontal : 3890 mm,
Max Table load : 63 ton.
Control : CNC Fagor.
 
  199
IDMA27638
MakeTos Hulin
ModelSKIQ12CNCB
YOM1995/06/11
ConditionGood Condition
PhotoSee Photo
Faceplate diameter : 1250 mm,
Swing diameter : 1500 mm,
Turning height : 1785 mm,
Workpiece weight : 12000 kg,
Faceplate turning speed range : stepless - 3,3 - 400 U/min,
Main drive motor : 40 kW,
Turning diameter without crash : 1850 mm,
Cross rail adjustment : 1250 mm,
Cross rail rapid travel : 480 mm/min,
Workpiece height max. : 1785 mm,
Ram - range of adjustment : 1000 Z-Achse mm,
Distance table - lower edge of ram : 1880 mm,
Distance face plate/tool carrier : 2020 mm,
Turning tool - shaft cross cut : 40 x 40 mm,
Total power requirement : 84 kVA,
Dimensions of the machine : 4,0 x 3,2 x 6,1 m,
Weight of the machine : 25 t.
4-axis CNC control Siemens Sinumerik 820 T with electron.
Handwheel.
1 ram on crossrail, ATC (Toolchanger) for 15 tools, faceplate, chip conveyor,
covering, handbooks etc.
without C axis and live tools.
 
  200
IDMA27590
MakeIMT Italy
ModelS32TM2
YOM1999
ConditionGood Condition
PhotoSee Photo
Max. turning dia. : 650 mm,
Max. swing dia. : 800 mm,
Spindle power : 55 kW,
Spindle speeds : 700 rpm,
Milling spindle :-
Spindle power : 11 kW,
Speeds : 4000 rpm,
Equipped accessoiries with :-
C - Axis, Milling-and Drilling spindle,
Pallet-changer,
Autom. Tool-changer with : 24-tools,
Highr presure pump and 2-pcs chip-conveyor,
Weight of the machine approx : 18 ton.
With CNC Control Siemens 840D.
 
  201
IDMA27567
MakeCKD Blansko,Czech
ModelSK50
YOM1970/Retrofited 2008
ConditionGood Condition
PhotoSee Photo
Table diameter: 4770 mm,
Swing: 5300 mm,
Max work piece height: 3000 mm,
Max work piece weight: 60 ton,
Traverse speed: 500 mm/min,
Main drive: 100 kW,
Power of face plate: 80 kW,
Dimensions:
Length: 17000 mm,
Width: 10000 mm,
Height: 12000 mm,
Height above floor level: 11500 mm,
Machine weight: 130000 kg,
Control: Sentroll 2
 
  202
IDMA27419
MakeYouji,Taiwan
ModelYV600ATC+C
YOM2008
ConditionGood Condition
PhotoSee Photo
Max. swing dis: 850 mm,
Max. cutting height: 600 mm,
X/Z axis travel: 800/650 mm,
Spindle speed: S1 20-1500 rpm/S2 2400 rpm (ZF gearbox)
12 ATC,
Control: Fanuc 18i TB,
Accessories:
Linear scale for X,Z axes,
24"3 jaws hydraulic chuck (S1),
Air conditioner for electrical cabinet,
Oil skimmer
CTS system (S2)
Chip conveyor & chip bucket,
Spindle oil cooler
 
  203
IDMI6118
MakeDefum Poland
ModelKNA110/135A
YOM1990
ConditionExcellent condition,under power
PhotoSee Photo
Faceplate diameter : 1100 mm,
Swing diameter : 1350 mm,
Turning height : 1200 mm,
Table load capacity : 4000 kp,
Total power requirement : 37,5 kW,
Weight of the machine ca. : 11.5 t.
Control : Siemens 828 CNC control.
 
  204
IDMA27276
MakeSedin Russia
Model1E512PF3
YOM
ConditionGood Condition
PhotoSee Photo
Max. dia of workpiece : 1250 mm,
Max. height : 1000 mm,
Faceplate dia : 1120 mm,
max weight of job: 4 tons
Number of upper supports with turrethead : 1,
MAx, upper support travel:
horizontal : 810 mm,
vertical : 700 mm,
Max, crossrail travel : 660 mm,
Dimensions: 2875x2660x4100 mm
Weight of the machine(with electric box and CNC) : 16.5 tons.
Control : Russion NC-230 CNC system.
 
  205
IDMA27258
MakeChinese
ModelCXK5263
YOM
ConditionBrand New
PhotoSee Photo
Max turning & milling Dia : 6300 mm,
Max height of workpiece : 4000 mm,
Max weight of workpiece : 100 t,
Table Dia : 6000 mm,
Table speed grade : 2 grades, stepless,
Range of table speed turning : 0-50r/min & milling : 0-6r/min,
Max torque of table : 300 KN.m,
Max travel of ram : 2000 mm,
Max horizontal travel of turning tool rest : -50-3400 mm,
Max horizontal travel of milling tool rest : -50-5000,
Max cutting force for turning (L : distance between tool nose and tool rest underside)
(Right vertical tool rest (L≤400mm)) : 100 KN,
(Left vertical tool rest (L≤400mm)) : 80 KN,
Total Max cutting force : 130 KN,
Cross section of tool bar : 60×60 mm,
Cross section of ram : 400×400 mm,
Feed grade of tool rest stepless,
Feed range of tool rest and ram tool : 0.1-500 mm/min,
Rapid traverse of ram and tool rest : 4000 mm/min,
Max travel of cross beam : 2750 mm,
Speed of cross beam rising and lowering : 350 mm/min,
DC Main motor power : 90 KW,
Motor power of boring and milling head : 55 Kw,
Weight of machine Approx : 195 T.
CNC system : Siemens 840D.
 
  206
IDMA27137
MakeKolomna Russia
ModelKR15
YOM1980 Rebuilt 2008
ConditionExcellent condition,under power
PhotoSee Photo
Table Diameter : 4500 mm,
Max Swing : 5200 mm,
Max Height under Cross Rail : 3350 mm,
Max Turning Height Axial turning : 2500 mm,
Max Turning Height Radial turning : 2650 mm,
Max Table Load : 60 ton,
Max Table Speeds : 36 RPM,
Feed Rate X + Y : 2.000 mm/Min,
Rapid Traverse : X= 4 M/Min; Z= 5 M/Min,
Main Motor : 100 kW,
Equipped with Two Swiveling Ram Heads,
Ram Stroke each : 1.700 mm,
Weight approx : 110 Ton.
Height over Floor : 9.100 mm,
CNC Control Siemens 840 D.
 
  207
IDMA27028
MakeTos Hulin
ModelSKQ8
YOM1992
ConditionFully Operational
PhotoSee Photo
Faceplate diameter : 800 mm,
Swing diameter : 1100 mm,
Turning height : 755 mm,
Travel -x axis : 625 / 80 mm,
Travel -z axis : 630 mm,
Workpiece height max : 690 mm,
Max. workpiece weight : 4000kg,
Shank diameter : 40 x 40 mm,
Transmission ratio 1,
4 - 100 U/min,
Transmission ratio 2,
16 - 400 U/min,
Torque : 8060 Nm,
Drive capacity - spindle motor : 30 kW,
Positioning steps : 0,01°,
Rapid traverse : 8 m/min,
Turning speed range - milling,
1 = 8,5 - 350 U/min,
2 = 26 - 1070 U/min,
3 = 80 - 3312 U/min,
Total power requirement : 53 kW,
Dimensions of the machine ca : 3,2 x 2,6 x 5 m,
Weight of the machine : 16 t.
Accessories :-
Chip conveyor,
Coolant system,
Driven tools - C-axis,
Central lubrication,
Chuck,
Tool holders (Pictures attached for various live tool holders).
Control : CNC control Siemens 3T.
 
  208
IDMA27020
MakeQiqihar,China
ModelSVT160EEX10/8P-NC
YOM
ConditionBrand New
PhotoSee Photo
Max turning diameter : 1600 mm,
Table diameter : 1400 mm,
Max height of turning : 1000 mm,
Loading capacity : 8t,
Table speed range : 2-200 rpm,
Max. torque of table : 16 kN.m,
Horizontal travel of railhead : -20—1030 mm,
Vertical travel of railhead : 800 mm,
Ram section : 350x215 mm (T type),
Max. cutting force of railhead : 25 kN,
Tool section : 40x40 mm,
Feed rate of railhead : 0.1—1000 mm/min,
Rapid travel of railhead : 4000 mm/min,
Max. travel of crossrail : 760 mm,
Main motor power : DC 37kw,
Tool position number on turret : 4,
Torque of feed motor of railhead : 10.5 N.m,
Machine weight : approx 14 t.
CNC system; SIEMENS 828D.
 
  209
IDMA27018
MakeQiqihar,China
ModelSVT160x10/8P-NC
YOM
ConditionBrand New
PhotoSee Photo
Max turning diameter : 1600 mm,
Table diameter : 1400 mm,
Max height of turning : 1000 mm,
Loading capacity : 8t,
Table speed range : 3.15 - 400 rpm,
Max. torque of table : 1 kN.m,
Horizontal travel of railhead : -20—1000 mm,
Vertical travel of railhead : 800 mm,
Ram section : 320 x 225 mm,
Max. cutting force of railhead : 16 Kn,
Tool section : 32 x 32 mm,
Feed rate of railhead : 0.1—1000 mm/min,
Rapid travel of railhead : 12000 mm/min,
Max. travel of crossrail : 700 mm,
Step positioning distance of crossrail : 100 mm,
Main motor power : AC 37 kw,
Tool position number on turret : 4,
Torque of feed AC servo motor of railhead : 38 N.m,
Machine weight : approx 20t.
CNC system SIEMENS 828D.
 
  210
IDMA27015
MakeTos Czech
ModelSKJ12A
YOM
ConditionExcellent
PhotoSee Photo
Face plate diameter : 1250 mm,
Swing diameter : 1400 mm,
Turning height : 850 mm,
Tool change unit : 5 fach,
Work piece weight max : 6000 kg,
Weight of the machine ca : 12 t,
Control : NC Tesla,
NC VTL with ball screws,
The machine is well suitable for CNC retrofit - all axis are with ball screws
 
  211
IDMA26976
MakeBerthiez France
ModelTFM160
YOM1975
Conditiondismantled partially
PhotoSee Photo
Turning diameter : 1880 mm,
Turning height : 1600 mm,
Work piece's max weight : 15000 kg,
Main drive motor : 45 kW,
Control : Siemens Sinumerik System 8,
With ATC.
 
  212
IDMA26967
MakeChinese
ModelCK5263
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max turning diameter : 6300 mm,
Table diameter : 5700 mm,
Max turning height : 4000 mm,
Max allowable weight of work piece : 80 ton,
Max allowable weight of work piece : 15 ton,
Speed range of table : 0.4-21 rpm,
No of speed ranges of table : 2 step (variable speeds within each range)
Horizontal travel of left & right tool heads : 50-3300 mm,
Vertical stroke of rams : 2000 mm,
Ram section size : 280 x 280 mm,
Feed rates of ram head : 0.1-500 mm,
Elevation speed of cross rail : 210 mm,
Max table torque : 225 kNm,
Max cutting force of right / left ram head : 60/500 kn,
Power of main motor : 90 kW,
Net weight of machine : 160 ton,
Siemens SINUMERIK 828D CNC Control.
 
  213
IDMA26913
MakeBullard,USA
ModelDyne-Au-Turn
YOM1983
ConditionGood Condition
PhotoSee Photo
Chuck Diameter (3 Jaw) : 1150 mm,
Maximum Turning Diameter : 1300 mm,
Maximum Height Under Rail : 900 mm,
Maximum Height Under The Turret : 1125 mm,
Horizontal Head Travel : 1150 mm,
Vertical Head Travel : 650 mm,
Cross Rail Travel Fixed,
Table Speeds : 8 – 162 RPM,
Feed & Traverse Rate : 0.001 – 200 RPM,
Control Allen Bradley,
Main Motor : 75 HP,
Overall Dimension : 3225 L x 3000 W x 4450 H mm,
Equipped With :-
Allen Bradley Series 9 CNC Control,
3 Jaw Power Chuck,
Chip Conveyor,
Five Sided Index Turret Head With Two Tools On Each Side,
Coolant System.
 
  214
IDMA26890
MakeUmaro,Poland
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
Table diameter : 2500 mm,
Swing : 2600 mm,
Main motor power : DC100HP,
For heavy Cutting.
Control : CNC FANUC 0T.
 
  215
IDMA26859
MakeRussian
Model1512F3
YOM1982
ConditionGood working condition
PhotoSee Photo
Table dia 1120mm, swing dia 1250mm, workpiece height 1000 mm, workpiece weight 4 tons, total power 30KW, Torque on faceplate 20 kN-m, max. turret slide travel 775 x 700 mm ( Horizontal x vertical), no. of turret stations 5, max. height of tool cross section 50 mm, no. of faceplate rotation frequency steps 18 , range of faceplate rotation frequencies 5-250 min(-1), variation of slide feeds: stepless, range of slide vertical & horizontal feeds, 3-300 mm/min., max. pitch of thread cut 40 mm, max. slide setting traverse speed 3000 mm/min., machine overall dimensions 2880 x 3610 x 5615 mm, machine weight 15 tons.
 
  216
IDMA26722
MakeQiqihar,China
ModelDVT800x50/150L-NC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max Turning diameter : 8000 mm,
Table Diameter : 6300 mm,
Max height of workpiece : 5000 mm,
Max Weight of workpiece : 150 t,
Tool section : 80 x 80 mm,
Table speed range : 0.2-20 rpm,
Max table torque : 400 kN.m,
Max cutting force of railhead : 63 kN for left railhead 80 kN for right railhead,
Feed rate of railhead : 0.1-1000 mm/min
Horizontal travel of railheads : 50-4400 mm,
Ram travel of railheads : 2500 mm,
Ram section : 320 x 320 mm,
Rapid travel of railheads : 4000 mm,
Max travel of crossrail : 4500 mm,
Main motor power : DC 110 kw,
Control : SIEMENS 840DSL CNC control.
Immediate delivery in stock.
 
  217
IDMA26721
MakeQiqihar,China
ModelDVT800x50/250Q-NC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max Turning diameter : 8000 mm,
Table Diameter : 7200 mm,
Max height of workpiece : 5000 mm,
Max Weight of workpiece : 250 t,
Tool section : 100 x 100 mm,
Table speed range : 0.16-16 rpm,
Max table torque : 500 kN.m,
Max cutting force of railhead : 80 kN for left CNC railhead 100kN for right conventional railhead,
Feed rate of railhead : 0.1-1000mm/min for left CNC railhead and 0.1-500 mm/min for right conventional railhead,
Horizontal travel of railheads : 50-4400 mm,
Ram travel of railheads : 2500 mm,
Ram section : 400 x 400 mm,
Rapid travel of railheads : 4000 mm,
Max travel of crossrail : 4250 mm,
Main motor power : DC 132kw,
Machine Weight : 365 t.
Control : SIEMENS 802D CNC control.
Immediate delivery in stock.
 
  218
IDMA26713
MakeChinese
ModelCK5263E
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max Swing diameter : 6300 mm,
Table diameter : 5000 mm,
Max height under cross rail : 5000 mm,
Max weight of work piece : 150 ton,
Rotation speed rang of working table : 0.2-20 rpm,
Horizontal travel of tool post : 3200 mm,
Vertical travel of tool post : 2500 mm,
Power of main motor : 90 kw, DC motor,
Weight of machine : 170 ton.
 
  219
IDMI6013
MakeBFW,India
ModelBVL800
YOM
ConditionBrand New
PhotoSee Photo
Maximum swing diameter : 1000 mm,
Maximum turning diameter : 850 for 200 mm,
Standard turning diameter : 600 for 800 mm,
Maximum turning length : 800 mm,
Maximum boring length : 350 mm,
Standard chuck size : 630 (530) mm,
Maximum weight of work-holding and job on the spindle : 1500 Kg,
Spindle :-
Nose A2-11,
Power, cont./ 15 min. rating : 18.5/ 22 kW,
Front bearing inner diameter : 190 (200) mm,
Maximum continuous torque : 1,228 (614, 2,184) Nm,
Speed : 50 - 1,000 (50 - 1,500) rpm,
Constant power range : 143 - 863 (288 - 1,500, 81 -1,000) rpm,
Live Tool Spindle :-
Taper BT 50,
Speed : 50-4500 rpm,
Power (S1/ 30 min) : 11/ 15 kW,
Maximum S1 duty torque : 100/136 Nm,
OD turning tool shank size : 32 x 32 mm,
X Axis :-
Type of guide-way Linear motion,
Horizontal travel stroke : 605 (565 + 40) mm,
Maximum rapid traverse : 20 m,
Z Axis :-
Vertical travel stroke : 830 mm,
Maximum rapid traverse : 20 m,
Automatic Tool Changer :-
Taper BT50 (with DIN 96872 pull stud),
Tools : 24 (20) Nos,
Maximum tool weight : 25 kg,
Maximum tool weight on ATC disc : 240 (200) kg,
Maximum tool holder size on ATC : 160 W x 160 T x 175 L mm,
Maximum boring bar size : 110 x 300 L mm,
Turning tool shank size : 32 x 32 mm,
Tool to tool : 6.5 S,
Chip to chip : 12 S,
Accuracy on X and Z Axes as per JIS 6336 - 1986 :-
Positioning : ±0.005 mm,
Repeatability : ±0.003 mm,
Accuracy on X and Z Axes as per ISO 230 - 2 :-
Positioning uncertainty : 0.012 mm,
Maximum positioning
scatter : 0.008 mm,
C Axis Accuracy :-
Indexing resolution : ±0.02°,
Machine weight : 10,000 kg,
Total connected load : 50 kVA,
CNC System : Fanuc OiTD/ Siemens 828 D.
 
  220
IDMA26664
MakeTopper,Taiwan
ModelTVL6DA
YOM2011
ConditionGood Condition
PhotoSee Photo
Max Swing Over bed : 800 mm,
Max. Cutting Dia : 760 mm,
Max. Cutting Height : 750 mm,
Spindle Speed : 25-2000 rpm,
Spindle Nose : A2-11,
X/Z axis travel : 275/460 mm,
18" 3 Jaw Chuck,
Turret : 12 stations,
Tool Holder dia : 32 mm,
Boring Tool dia : 50 mm,
Controller : FANUC 0i-TD.
 
  221
IDMA26657
MakeChinese
ModelCK5116
YOM
ConditionBrand New
PhotoSee Photo
Max turning diameter : 1600 mm,
Max height of workpiece : 1400 mm,
Diameter of table : 1400 mm,
Max load of table : 5 t,
Max torque of table : 25 K.NM,
Speed range of table : 5-160 rpm,
Section of arbor : 30*40 mm,
Max cutting force of vertical railhead : 22 Kn,
Swivel angle of vertical railhead : 30,
Feeding range of railhead : 0.1-500 mm,
Horizontal travel of vertical railhed : 915 mm,
Vertical travel of vertical railhead : 800 mm,
Rapid traverse of railhead : 1560 mm,
Section of arbor : 30*40 mm,
Power of motor : 30 Kw,
Overall dimension : 2830*2670*3010 mm,
Weight of machine : 12 t.
Control : Siemens 802C Controller, ram and no side tool port.
 
  222
IDMA26643
MakeSedin Russia
Model1L532
YOM
ConditionGood Condition
PhotoSee Photo
Faceplate diameter : 2800 mm, Max. work piece diameter : 3200 mm, Max. work piece height : 1600 mm, Max. work piece weight : 16000 kg, Faceplate turning speed : 1,25...63 rpm, Motor power : 55 kw, Machine diamensions : 5490 x 6540 x 5100 mm, Machine weight : 43000 kg, Control : Fanuc OT, One ran is controlled with CNC.
 
  223
IDMA26532
MakeHitachi Seiki,Japan
Model
YOMNew in 1980
Conditionexcellent working condition
PhotoSee Photo
Table diameter : 2400 mm,
Max. swing : 8000 mm (column moving),
Working height : 2300 mm,
Control : Fanuc 0i -T.
 
  224
IDMA26508
MakeShibaura
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table dia : 4000 mm,
Swing dia : 6000 mm,
Working height : 2300 mm,
Main motor power : DC150HP,
Control System : Fanuc 0T.
Table : Bearing (fro Rough work and finishing work).
 
  225
IDMA26501
MakeHomma
ModelTAC16/20
YOM1983
ConditionGood Condition
PhotoSee Photo
Table : 1600 mm,
Swing diameter : 2000 mm,
Working height : 1500 mm,
256 RPM,
ATC 12 tools,
Control : Fanuc 21iTB.
 
  226
IDMI5971
MakeTos Czech
ModelSKJ12
YOMRetrofitted in 2013
ConditionGood Condition
PhotoSee Photo
Max workpiece diameter : 1400 mm,
Chuck diameter : 1250 mm,
With 3 jaw hydraulic chuck,
Max workpiece height : 1150 mm,
Max weight on table : 6000 kg,
Total machine weight : 14000 kg.
Dimensions : 2970 x 2770 x 4250 mm,
Cross rail vertical travel : 800 mm,
Z axis travel : 650 mm,
X axis travel : 1800 mm,
Rapid federate : 8000 mm,
Max cutting federate : 5000 mm,
Max spindle gears 3 stages,
Turret 5 station programmable,
Machine guards full enclosure with hydraulic door,
Coolant system,
New Rajmane make coolant pump with tank,
Electrical Specifications :-
X axis servo motor Fanuc B112 is 2000,
Z axis servo motor Fanuc B22 is 2000B,
Spindle motor Fanuc B15i/7000 15/18 Kw,
Spindle feedback encoder,
Control : CNC system Fanuc FS 0i mate TD.
Machine is completely refurbished with total reconditioning and new CNC system,
Mmachine is equipped with full enclosure operated by hydraulic cylinders,
All guide ways are scrapped and axes bearings replaced with RHP make ball screw support bearings.
The machine is having ball screws on X and Z axes which are completely reconditioned.
New coolant system is provided on the machine.
The machine is retrofitted with latest Fanuc CNC system, AC servo motor, AC spindle motor and completely new electrical panel and wiring.
 
  227
IDMA26491
MakeKolomna Russia
Model
YOM1976 / 2010
ConditionGood Condition
PhotoSee Photo
Table diameter : 6300 mm,
Max Swing : 10000 mm,
Working height : 5000 mm,
Max load on table : 200 tons,
Ram size : 400 x 400 mm,
Ram working depth : 2800 mm,
Table speed : 23 rpm,
Main motor : 326 Hp,
Control : Sentrol 2,
 
  228
IDMA26480
MakeFroriep
Model25/4KZ-420
YOMRetrofit 2009
ConditionExcellent condition,under power
PhotoSee Photo
Table diameter : 4200 mm,
Workpiece diameter : 4500 mm,
Turning Height : 3000 mm,
Ram stroke : 1800 mm,
Workpiece load : 25000 kg,
Table speed : 37.5 min-1.
Control : Siemens 840D SL.
New electrical and control systems,
New ball screws in X and Z axis
New measuring system,
New lubrication system,
Overhaul of the Ram and the main motor.
 
  229
IDMA26443
MakeO-M
ModelTDC16N
YOM1997
ConditionGood Condition
PhotoSee Photo
Table diameter : 1600 mm (two pallets),
Swing : 2000 mm,
Working height : 1275 mm,
ATC : 12 station/for milling : 24 stations/Total 36 stations,
Control : Fanuc 18T.
 
  230
IDMA26413
MakeHessapp
Model
YOM1994
ConditionExcellent
PhotoSee Photo
Turning diameter : 1450 mm,
Faceplate diameter : 1450 mm,
Maximum turning height : 900 mm,
Face stroke : 1350 mm,
Machine Weight : 26000 kg.
With 2 slides Z1 and Z2,
Coolant purification system combined with a band pass filter,
Chip conveyor,
Automatic loading system gantry loader 120 pos .tools.
Control : Siemens 850-880T.
 
  231
IDMA26405
MakeKolomna Russia
Model1550T
YOM1981 / 2009
ConditionGood Condition
PhotoSee Photo
Chuck diameter : 4500 mm,
Max diameter of work piece : 5000 mm,
Max height of work piece : 2500 mm,
Max shift of vertical supports : 1600 mm,
Turn angle of vertical support : -15 to +40 degrees,
Max weight of work piece : 100 tones,
Max effort of cutting by two supports : 12500 kN,
Max moment of cutting at chuck : 20000 knm,
Speed of chuck turning : 0.34 - 31.2 minute,
Vertical and horizontal feed : 0.0435 - 352 mm,
Main motor power : 150 kW,
Weight of machine : 165000 kg.
Control : CNC FANUC Series O-T.
 
  232
IDMA26340
MakeKolomna Russia
Model
YOM1975 / Rebuilt 2009
Conditionworking condition ,under power
PhotoSee Photo
Faceplate diameter : 6300 mm,
Swing diameter : 6350 mm,
Turning height : 5200 mm,
Workpiece weight : 150 t,
Ram head vertical travel : 3425 mm,
Ram head swiveling : +/-30°,
Total power requirement kW,
Dimensions of the machine ca m.
Weight of the machine ca t.
Control : with NUM 1060 CNC control.
 
  233
IDMA26338
MakeKolomna Russia
Model1540
YOMRetrofit 2006
ConditionGood Condition
PhotoSee Photo
Max Swing : 4000 mm,
Max Height : 2000 mm,
Table Diameter : 4000 mm,
Max slider stroke : 1250 mm,
Right slider type : turning,
Left slide rtype : combinated,
Corner of supports turn : -15 +40,
Weight of the workpiece on a faceplate : 50000 kg,
Capacity of the main drive : 90 kW,
Height above a level of a floor : 6000 mm,
Dimensions (lenght-width-height) : 5900 x 10100 x 7200 mm,
Machine weight : 100 ton.
 
  234
IDMA26314
MakeWhacheon
ModelHVT4550M
YOM2012
ConditionBrand New
PhotoSee Photo
Table dia : 4500 mm,
Max. swing dia : 5000 mm,
Max. working height : 2500 mm,
Max. loading capacity : 40000 KG,
Table RPM : 1 to 50,
Table motor power : 145 KW,
Two rams,
Ram size : 350 x 350 mm,
Milling spindle power : 22/30 KW,
Milling tool RPM : 15 to 1500,
Max. travel of axes (X/Y/Z ) : -200~4100/1500/2000 mm,
Max. tool loading : 12 positions,
Table indexing (C axis ) : 0.001 deg,
Control : Siemens 840D,
With C axis and turn mill.
 
  235
IDMA26301
MakeDiedesheim
ModelVertifront40-11
YOM1979 Retrofitted 2003
ConditionGood Condition
PhotoSee Photo
Turning diameter : 800 / 710 mm,
Turning height : 500 mm,
4 tool turret,
Hydraulic chuck : 500 mm,
Autom door,
Cooling,
Chip conveyor,
Control : CNC SIEMENS 840 C.
 
  236
IDMA26300
MakeDiedesheim
ModelVertifront40-11
YOM1980 Retrofitted 2003
ConditionGood Condition
PhotoSee Photo
Turning diameter : 800 / 710 mm,
Turning height : 500 mm,
4 tool revolver,
Hydraulic chuck : 630 mm,
Autom. door,
Cooling,
Chip conveyor,
Control : CNC SIEMENS 840 C.
 
  237
IDMA26295
MakeSedin Russia
Model1L532
YOM
ConditionGood Condition
PhotoSee Photo
Turning diameter : 3200 mm,
Faceplate diameter : 2800 mm,
Turning height : 1600 mm,
Workpiece weight : 16000 kg,
Number of tool slides : 2,
Horizontal stroke of tool slide : 1720 mm,
Vertical stroke of tool slide : 1200 mm,
Tool slide positioning speed : up to 1780 mm/min,
Transversal beam feed : 360 mm/min,
No of feed carriages : 16,
Carriages feed range : 0,09 -16 mm/rev,
Crossrail travel : 1240 mm,
Faceplate speed : 0,25-63 rpm,
Main drive power : 55 kw,
Overall dimensions : 5640 x 7150 x 4900 mm,
Machine weight : 43.000 kg.
System : SENTROL 2.
 
  238
IDMA26288
MakeRafamet Polish
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter : 3200 mm,
Swing diameter : 3500 m,
Working height : 1800 mm,
Control : Sentrol2,
One ram is controlled with CNC ,
The other ram is manual type
 
  239
IDMA26254
MakeDoerries Scharmann
Model
YOM2012
ConditionGood,unused
PhotoSee Photo
Faceplate diameter : 4000 mm,
Swing diameter : 4500 mm,
Turning height : 3645 mm,
Workpiece weight : 50 t,
Main drive : 2 x 100 Kw,
Drive milling spindle : 51 kW,
Faceplate turning speed range : 160 U/min,
C-axis : 9,9 r/min,
Y-axis : 6000 mm/min,
Tool travel horizontal : +/-2500 mm,
Tool travel vertical : 2000 mm,
Ram head dimension : 300 x 300 mm,
Spindle taper : ISO 50,
Toolpiece turning speed range : 2400 U/min,
Tools speed : 10 - 2400 U/min,
Boring spindle diameter : 170 mm,
Total power requirement : 340 kVA,
Dimensions of the machine : 16,5 x 14 x 8,7 m,
Weight of the machine : 230 t.
5-axis machining package,
Drive system SINAMICS S 120 with integrated SIMATIC S7PLC 317-2DP,
Full c-axis with 1/1000° resolution,
Y-axis (longit. table movement) +/-2500 mm,
Live spindle for milling and drilling operation,
Cross rail adjustment,
Various tool magazines and BALLUF BIS-C tool code,
Universal angular head UWFK 1500 Nm +/- 90°, positioning axis - stepless swivelling incl. torque support for HENNINGER heads, ISO 50 taper, max. 2500 rpm,
Complete splash housing with sliding doors,
Coolant system with through-spindle cooling 80 bar,
Crossbeam carriage with hydrostatic guideways,
Machine table with axial thrust bearing and helical ball bearing in radial,
Main drive by 2 asynchronous AC motors and 2-step gear,
Workpiece measuring with measuring cycles controlled by NC,
Tool measuring with tracer,
Tool and process control ARTIS CTM-system (DOERRIES),
Chip conveyor,
CNC control SIEMENS 840D sl with HMI advanced.
 
  240
IDMA26221
MakeNiles,USA
Model6500
YOMRetrofitted in 2008/2009
ConditionGood working condition
PhotoSee Photo
Table diamater : 3800 mm / (sub table 6000mm),
Max. swing : 6450 mm,
Max. turning height : 6000 mm,
Table speed for turning : 1~ 45 rpm,
Max. load on table : 150 Ton ,
Vertical travel of ram head(z1-axis) : 2500 mm,
Vertical travel of ram head(z2-axis) : 2500 mm,
Rapid feed of ram head X-axis : 4000 mm/min,
Rapid feed of ram head Y-axis : 4000 mm/min,
Feed rate of ram head(X&Z) : 0~2000 mm/min,
Ram size : 280 mm,
Tool shank size : 50 x 50 mm,
Vertical travel of cross rail : 6000 mm,
Main motor for table drive : 300 kW,
Motor for cross rail (W-axis) : 30 kW,
Motor for cross rail (X1-axis) : 5.5 kW,
Motor for cross rail (X2-axis) : 5.5 kW,
Motor for cross rail (Z1-axis) : 5.5 kW,
Motor for cross rail (Z2-axis) : 5.5 kW,
CNC System : SENTROL II.
 
  241
IDMA26174
MakeS&T
ModelTVL160
YOM2008
ConditionGood Condition
PhotoSee Photo
Working Capacity : 1600 x 2000 mm,
X axis linear scale,
With chip conveyor,
Control : CNC Fanuc.
 
  242
IDMA26165
MakeHomma
ModelTAC16
YOM1993
ConditionGood Condition
PhotoSee Photo
Max turning diameter : 2000 mm,
Max Swing : 2000 mm,
Min internal dia for ram passage : 150 mm,
Distance between tool holder and table surface : max - 1630 mm and min - 880 mm,
Max load on table : 10,000 kgs,
Table dia : 1600 mm,
Table ram : 1-256 rpm,
Max table torque : 1879 kg.m,
Size of ram : 200 x 200 mm,
Travel to X axis direction : 1050 to 1250 mm,
Travel to Z axis direction : 900 mm,
Cutting speed of X and Z axis direction : 0.001 - 50 mm,
Rapid feed speed to X axis direction : 10000 mm,
Rapid feed speed to Z axis direction : 10,000 mm,
Working capacity : 1600 x 2000 x 1630 mm,
Ram type : 16/20,
ATC : 12,
With manual book,
CNC Fanuc 15T.
 
  243
IDMA26134
MakeS&T
ModelTVL160
YOM2008
ConditionExcellent condition,under power
PhotoSee Photo
Table diameter : 1600 mm,
Max turning diameter : 2000 mm,
max turning height : 761 mm,
CNC Controller Fanuc OiT-C
 
  244
IDMA26120
MakeHessapp
ModelDV32-2
YOM1993
ConditionDisassembled
PhotoSee Photo
Chuck diameter : 315 mm (but you can also put chuck dia upto 400 mm),
Max. turning dia : 440 mm,
Center height : 235 mm,
Max. turning length : 440 mm,
Max. diameter of the crank : 500 mm,
Revolver with 8 positions,
Spindle speed : 63-2240U / min,
Chip conveyor,
Control : Siemens 880 T,
Quantity : 2 nos.
 
  245
IDMA26119
MakeCKD Blansko,Czech
ModelSK50A
YOMRetrofitted with CNC Fanuc 0TT in 2008
ConditionExcellent condition,under power
PhotoSee Photo
Max. turning dia : 4000 mm,
Max. turning height: 2800 mm,
Max. work piece weight : 63 tons,
Clamping plate dia : 3200 mm,
Main drive output : 100 KW'
Clamping plate speed range : 0.8 to 100 RPM,
Max. stroke of cross rail head ram : 1600 mm,
Feeds : working 0.1 to 500 mm/min,
Rapid traverse : 5000 mm/min,
Max. cutting force : 100 kN.
 
  246
IDMA26108
MakeTos Czech
ModelSKIQ16CNCB
YOM1991
ConditionGood Condition
PhotoSee Photo
Face plate : 1600 mm,
Max. swing : 1800 mm,
Max distance between face plate and clamping area slide : 1960 mm,
Max. high on working area face plate to bottom support : 1820 mm,
Max. stroke slide /Z axis : 1000 mm,
Max. work piece high : 1725 mm,
Max. work piece weight : 16000 kg,
Max. crossbar stroke : 1250 kW,
Max. speed face plate : 3,15-315 min-1
Gear steps : 2,
Torque on face plate : 13760 Nm,
Feed
Rapid feed : 8000 min-1,
Feed each rotation up to max.6 m/min 0,01-99,99 min1,
Thread turning : 0,01-99,99 min-1,
Space require : 4270 x 3400 x 6140 mm,
Machine weight : 29200 kg,
Control : SINUMERIK 3T,
Equipment:
C- axis, drive for milling tools, coolant equipment, chip conveyor,2 piece basic holder for driven.
 
  247
IDMA26058
MakeHessapp
Model
YOM1985
ConditionExcellent
PhotoSee Photo
Table diameter : 1000 mm,
Turning diameter : 1000 mm,
Swing diameter : 1100 mm,
Turning height : 1000 mm,
ATC : 12 station tools,
Taper : VDI 60,
Power requirement : 55 kW,
Weight of the machine : 15 ton.
Control : Siemens Sinumerik system 8-T-Sprint.
Chip conveyor,
Coolant device.
 
  248
IDMA26049
MakeQiqihar,China
ModelDVT500
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Table diameter : 5000 mm,
Max. swing diameter : 5500 mm,
Max. working height : 2000 mm,
Control : Centrol2
 
  249
IDMA26048
MakeKolomna Russia
Model1540
YOM
ConditionExcellent condition,under power
PhotoSee Photo
Diameter of workpiece 4000 mm, Height of workpiece 2000 mm, Diameter of a faceplate 4000 mm, Max. slider stroke 1250 mm, Right slider type turning , Left slide rtype combinated , Corner of supports turn 15 +40, Weight of the workpiece on a faceplate 63 tons ,Effort of cutting to a right support 63 kH. Effort of cutting to the left support 50 kH. The max total effort of cutting by two supports 100 kH. Table speeds: 0.52 - 48.7 rpm . Feeding 0,059 - 470 mm/min. Rapid feeding 2715 mm/min . Capacity of the main drive 125 kw. Height above a level of a floor 6000 mm. Dimensions (lenght-width-height) 5900 x 10100 x 7200 mm , Machine weight 100 tons, Control : centrol2
 
  250
IDMA26044
MakeDoosan
ModelV740
YOM2004
ConditionGood Condition
PhotoSee Photo
Max. swing : 800 mm,
Max. turning dia : 740 mm,
Max. turning length : 760 mm,
Spindle speed max : 2000 rpm,
Main drive motor : 37 KW/30 KW,
X axis travel : 380 mm,
Z axis travel : 760 mm,
Turret type : V12,
Rapid traverse X & Z : 19990 mm/mim,
Approx weight : 9506 kg,
Control : Fanuc 21TB CNC
Equipped with :
12- station turret
Chip conveyor
Coolant.
 
  251
IDMA26040
MakeRichard,UK
Model
YOMRetrofitted in 2010
ConditionGood condition,under power
PhotoSee Photo  |  See Video
Swing : 5000 mm,
Table : 4650 mm,
Working height : 3000 mm,
Ram stroke : 2000 mm,
Motor Power : 150 HP,
Speed : 34 RPM,
Ram size : 270 x 250 mm (octagonal),
With Hydrostatic Table (capacity : 150 Tons),
With 2 Vertical Rams (Both CNC Controlled),
With Chip Conveyor,
Machine retrofitted with Fanuc-18iMB (2 Axis) CNC Control in 2010.
 
  252
IDMA25966
MakeSedin Russia
ModelVertiturn KS522
YOM2000
ConditionGood Condition
PhotoSee Photo
Table diameter : 2000 mm,
Dimensions : 5 x 5 x 4.5 m (LXWXH),
Control : Siemens 840 C
 
  253
IDMA25960
MakeChinese
ModelC5250x31-50
YOM2009
ConditionGood working condition
PhotoSee Photo
Table diameter : 4500 mm,
Max swing diameter : 5000 mm,
Max working height : 3150 mm,
Max loading capacity : 50 tons,
Control : CNC FANUC 0iTT.
Only frame was made by Qiqihar machine tool / all the other parts were built in Korea.
 
  254
IDMA25905
MakeSchiess,German
Model4VKE500-1100
YOM1966 Retrofit 2002
ConditionGood Condition
PhotoSee Photo  |  See Video
Faceplate diameter : 5000 mm,
Swing diameter : 11000 mm,
Turning height : 3000 mm,
Ram adjustment : 2400 mm,
Workpiece weight : 120 ton,
Cross rail adjustment vertical : 2500 mm,
Column travel : 3000 mm,
Ram head cross travel : 5700 mm,
Ram swivable +/- : 10° / 35° deg,
Main drive : 100 kW,
Milling motor : 25 kW,
Height over floor : 9750 mm,
Total power requirement kW,
Dimension of machine m,
Weight of the machine t.
Control : 3 Achsen.
Maximum distance from face plate to bottom toolholder : 3250 mm,
Maximum distance from face plate to bottom cross rail : 3700 mm,
Accessories :-
CNC control "German brand" for 3 axes.
C-axis for the faceplate with high-resolution measurement system.
3-pos head changer
90 deg angular milling head for milling, boring, threading operation, taper ISO 50, torque approx. 1500 Nm,
With traversing machine column and traversing cross rail.
Machine in very good condition, inspection under power in the factory possible. In 2002 the machine was mechanical overhauled and with CNC modernized.
A protocol for a recent laser measurement of theis year is available
Term of delivery : approx. Feb. 2013.
 
  255
IDMA25807
MakeQiqihar,China
ModelSVTM200x16-12L-MC
YOM
ConditionBrand New
PhotoSee Photo
Max turning diameter : 2000 mm,
Max swivel diameter : 2000 mm,
Max turning height of workpiece : 1600 mm,
Max loading weight of table : 12 ton,
Diameter of table : 1600 mm,
Rotating speed range of table : 2~250 r/min,
Max torque of table : 0.004-2 r/min,
Turning 25 KNm,
Turning milling head : 12.5 KN.M,
Rapid moving velocity of turning milling head horizontal : 8000 mm,
Rapid moving velocity of turning milling head vertical : 8000 mm,
Feed rate of turning milling head : 0.1~1000 mm,
Horizontal stroke of turning milling head : 1250~1250 mm,
Vertical stroke of turning milling heads ram : 1250 mm,
Ram section scale of turning milling : 280 x 280 mm,
Scale of tool bar : 40 x 40 mm,
Max cutting force of rail head : 40 kN,
Motor power of milling A.C servo spindle : 17.5kW S2=22kW,
Rotating speed rang of milling spindle : 10~1500 r/min,
Taper hole of spindle : BT50,
Max torque of milling spindle : 1000 N.m,
Left right tool magazine,
Right turning tool magazine,
Tool magazine mode,
Position number : 12,
Max cutter's weight : 40 kg,
Max tool's length : 400 mm,
Taper hole of spindle : BT50,
Cross rail,
Stroke of cross rail elevating : 1000 mm,
Velocity of cross rail elevating : 350 mm,
Motor power of cross rail elevating : 11 kW,
Power of main motor : 55 kW,
Scale of machine (L x W x H) : 7700 x 4800 x 7800 mm,
Weight of machine : 35 ton.
Control : CNC system SIEMENS 840D.
 
  256
IDMA25769
MakeCarnaghi
ModelAC20TM1600
YOM1993
ConditionGood Condition
PhotoSee Photo
Faceplate diameter : 1600 mm,
Swing diameter : 2000 mm,
Turning height : 2400 mm,
X-axis : 1.210 + 1.210 mm,
Z-axis : 1500 mm,
Cross rail - adjustment : 1400 mm,
Main drive : DC 60 kW,
Faceplate turning speed range : 1-380 U/min,
Milling spindle drive : 29 kW,
Milling head speed : 10 - 3000 U/min,
Feeds : 0,1 - 2000 mm/min,
Table load : 15 t,
Ram head dimension : 250 x 250 mm,
Max. torque on the faceplate : 45000 Nm,
Total power requirement : 120 kW,
Dimensions of the machine ca. : 5,0 x 9,0 x 6,3 m,
Weight of the machine ca. : 58 t.
Equipment :-
CNC Siemens 880 control.
Live spindle with coolant through spindle.
Optional pallete changer 2-fold.
C-axis.
Tool changer for 48 tools taper KM 80 and max. 400 mm length.
Tool changer for 24 tools taper SK 50 and max. 200 mm length.
Adjustable crossrail.
Head changer for :-
3 extension 200, 400 and 600 mm langth, Capto.
2 spindle adapter for cutting tools.
1 angular milling head, Capto.
1 offset extension, Capto.
1 spindle adapter ISO 50.
1 spindle adapter with calibrating head.
RENISHAW MP 3 tool seting device.
Coolant device with paperband filtration, splash housing.
 
  257
IDMA25758
MakeRussian
Model1512F3
YOM1989
ConditionGood Condition
PhotoSee Photo
table dia 1120mm, swing dia 1350mm(its been increaded), workpiece height 1000 mm, workpiece weight 4 tons, total power 30KW, Torque on faceplate 20 kN-m, max. turret slide travel 775 x 700 mm ( Horizontal x vertical), no. of turret stations 5, max. height of tool cross section 50 mm, no. of faceplate rotation frequency steps 18 , range of faceplate rotation frequencies 5-250 min(-1), variation of slide feeds: stepless, range of slide vertical & horizontal feeds, 3-300 mm/min., max. pitch of thread cut 40 mm, max. slide setting traverse speed 3000 mm/min., machine overall dimensions 2880 x 3610 x 5615 mm, machine weight 15 tons, Under reconditioning.
 
  258
IDMA25757
MakeSMTCL
ModelGTC250110
YOM2009
ConditionBrand New
PhotoSee Photo
Max turning diameter : 2500 mm,
Max Swing diameter : 2500 mm,
Workable diameter : 2000 mm,
Max workpiece height : 2000 mm,
Max workpiece weight : 10 ton,
Max torque : 22683 x 25027 Nm,
Vertical travel of ram : 1100 mm,
Horizontal travel of ram : -100-+3230 mm,
Ram section size : 240 x 240 mm,
Tool bar section size : 40 x 40 mm,
Stations of tool magazine : 12 station,
Max weight of each tool holder : 50 kg,
Cutting feed speed : 0.01-40 mm,
Rapid feed speed : 8 m/min,
Table rotating speed : 1-180 r/min,
Worktable shifting steps : 2 step,
Crossbeam vertical travel : 250 x 4 mm,
Main drive motor power : AC 60/60 kW,
Power of motor for horizontal feed : 7/5.23 kW,
Power of motor for vertical feed : 7/5.23 kW,
Workpiece accuracy : 1T6,
Workpiece surface accuracy : Ra1.6 mm,
Overall dimensions of machine : 10600 x 5600 x 7163 mm,
Weight of machine : 50000 kg.
Control : CNC Siemens 802D control.
Immediate Delivery.
 
  259
IDMA25755
MakeSchiess,German
Model
YOM1978/ retrofitted 2009
ConditionDismantled,Good condition
PhotoSee Photo
Table diameter : 4500 mm,
Max. turning diameter : 5000 mm,
Max. height of work piece : 4000 mm,
Max. weight of work piece : 80 ton,
Max speed range of tabl e: 22 r/min,
Main motor power : 125 hp,
Machine weight : approx. 143 ton,
Control : Fanuc 18 iMB (X & Z Axis)
Only Right ram is CNC Controlled.
Main motor is DC driven.
 
  260
IDMA25723
MakeQiqihar,China
ModelSVTM200X16/12A-NC
YOM
ConditionBrand New
PhotoSee Photo
Table diameter : 1800 mm,
Max. turning diameter : 2000 mm,
Max. height of workpiece : 1600 mm,
Max. weight of workpiece : 12 tons,
Speed range of table : 2-250 rpm,
Rotary feed range of table (c axis ) : 0.004-2r/min,
Max. torque of table : 25 kN.m,
Max. cutting force of tool head : 32 kN,
Rapid speed of toolhead : 10000 mm/min,
Horizontal travel of rail head : 22-1250 mm,
Vertical travel of rail head : 1000 mm,
Railhead feed rate range : 0.1~1000 mm/min,
Railhead tool bar section : 40 x 40 mm,
Spindle speed range (Stepless) : 10~1500 r/min,
Spindle taper hole MAS (BT50) : 7:24,
Milling AC spindle motor power : S1=28kW; S2=38 kW,
Max stroke of crossrail : 1000 mm,
Step of crossrail : 6,
Distance between stepof crossrail : 200 mm,
Elevating speed of crossrail : 410 mm/min,
Cross elevating motor power : 7.5 kW,
Main motor power : 55 kW,
Total power : 95 kW,
Approx weight : 37 tons,
with Fanuc 0i CNC system,
Delivery period 10 months.
 
  261
IDMA25643
MakeO-M
ModelTM2-10N
YOM1992
ConditionGood Condition
PhotoSee Photo
Table dia : 1000 mm,
Max. work dia : 1350 mm,
Max. work height : 985 mm,
Max. Wt on table : 3000 Kgs,
Ram vert travel : 600 mm,
Ram head size : 180 x 180 mm,
ATC : 12,
Table speed : 3-400 rpm,
Main motor : AC22/30 KW,
Machine weight : 10,000 Kgs,
Control : F-15TA.
 
  262
IDMA25566
MakeQiqihar,China
ModelSVTM125x10/5L-MC
YOM
ConditionBrand New
PhotoSee Photo
Max turning diameter : 1250 mm,
Table diameter : 1100 mm,
Table speed ranges : 3.15-400 rpm,
Max work piece : 5000 kg (100r/m), 3200kg(full revolving speed),
Feed revolving range of C axle : 0.004-2,
Turning height : 1000 mm,
Max torque of table : 12.5 kNm,
Table speed : two step/stepless,
Max cutting force of railhead : 25 kN,
Milling spindle speed ranges : 10-2500 r/min,
Milling motor power : 22 kW,
Max torgue of milling spindle : 800 Nm,
Railhead Nos : 1,
Travel of railhead (horizontal) : 20-1200 mm, (verticle) : 1000 mm,
Travel of crossrail (verticle) : 600 mm,
Elevating speed of cross rail : 410 mm/min,
Secton of ram : 250 mm X 250 mm,
Section of toolbar : 40 mm X 40 mm,
Feed range of railhead : 0.1-1000 mm/min,
Feed range of ram : 0.1-1000 mm/min,
Swing angle of railhead : no,
Elevating motor of crossrail : 5.5KW,
Cutter head : right-angle.
Delivery Period : 10 Months.
 
  263
IDMA25545
MakeChinese
ModelCK5269E
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table diameter : 5000 mm
Max. turning diameter : 6900 mm,
Max. turning height: 4000 mm,
Max. weight of workpiece : 50 t,
Ram section size : 280 x 280 mm,
Max. cutting force of left toolpost : 70 KN,
Max. cutting force of right toolpost : 80 KN,
Positioning accuracy : 0.03 mm,
Repeatability positon accuracy : 0.015 mm,
Variable speed range of table : 0.5-40 r/min,
Max. torque of table : 100 kn.m,
Max. cutting force of right tool post : 50 Kn,
Horizontal stroke of right tool post : -50-3750 mm,
Vertical stroke of right ram : 2000 mm,
Feeding range of left tool post : 0.1-2000 Mm/min,
Section of cutting bar : 50*60 mm,
Tool post rapid traverse speed : 3000 Mm/min,
Crossbeam max. stroke : 3400 mm,
Beam moving speed : 350 Mm/min,
Motor power of crossbeam lifting motor : 22 KW,
Main motor power : DC90 Kw,
Moving degree limit of vertical tool post : °-15~+30
Control : Siemens 802D sl.
 
  264
IDMA25466
MakeHNK Machine Tool-Korea
ModelNT25/30
YOM2009
ConditionDismantled,Good condition
PhotoSee Photo
Table Dia: 2,500 mm
Max. Swing: 3,000 mm
Max. Turning height (Distance Between Table surface and Standard Toolholder end): 2,000mm
-TABLE:
Table Speed for Turning (2 Steps): 1~100 r.p.m
Mx. Load on Table: 15,000 kg
-RAM HEAD
Horizontal Travel of Ram Head (X-axis): -200~+1700
Vertical Travel of Ram Head (Z-axis) : 1,200mm
Rapid Feed of Ram Head
- X axis: 10,000mm/min
- Z axis: 10,000mm/min
Feed Rate of Ram Head (X & Z) : 1~3000 mm/min
Ram Size: 240 X 240 mm
Tool Shank Size: 40 X 40 mm
-CROSS RAIL:
Vertical Travel of Cross Rail: 250 X 4steps
-MOTOR POWER
Main Motor for Table Drive: A.C SPINDLE 45/55 kw
Motor for Ram Head (X-axis) : A.C SERVO 7
Motor for Ram Head (Z-axis) : A.C SERVO 7
Control : FANUC 18i - TB (10.4" TFT LCD.
 
  265
IDMA25455
MakeChinese
ModelCK5116
YOM
ConditionBrand New
PhotoSee Photo
Max turning diameter of vertical tool post : 1600 mm,
Table diameter : 1400 mm,
max turning height : 1400 mm,
Rotate range of table I : 1-200 min,
Stage number of variable speed : Four gears + stepless,
Max cutting force of vertical tool post : 25000N,
Max torque : 32000 N.m,
Level stroke of vertical tool post : 1020 mm,
Vertical stroke of vertical tool part : 800 mm,
Tool rest form : Four station,
Beam stroke : 850 mm,
Tool rest rapid traverse speed : 6000 mm heavy duty cutting model,
Beam lifting speed : 440 m/min,
Sectional dimensions of cutter bar (length*width) : 40*40 mm,
Main motor power : AC45 kw,
Accuracy of positioning : 0.03 mm,
Accuracy of repeatability positioning : 0.015 mm,
Machining accuracy : IT7,
Overall size (L*W*H) : 5260*3260*3698,
Weight : 13.2 ton.
Control : Siemens802D.
 
  266
IDMA25446
MakeKolomna Russia
Model1540T
YOM1995 / 2000
ConditionGood Condition
PhotoSee Photo
Spindle table diameter : 4000 mm,
Maximum weight on the table : 100 ton,
Swing dia : 4300 mm,
Workpiece max. diameter : 4300 mm,
workpiece max. height : 2500 mm,
Mobile crossbar,
N.02 carriages,
N.02 RAM,
Control keyboard ,
Chip conveyor,
Motor power : 180 kW,
Weight : 180 Tons,
Overall Dimensions : 6100 x 10400 x 8400 mm,
Height above ground : 6900 mm,
Control : SIEMENS 840 CNC (Retrofitted in 2000).
 
  267
IDMA25346
MakeWuhan,Chinese
ModelCKX5263x50-100
YOM
ConditionBrand New
PhotoSee Photo
Max turning dia : 6300 mm,
Max turning height : 5000 mm,
Max loading capacity of table : 100 ton,
Table diameter : 5700 mm,
Table rotating speed (turning) : 0.315-31.5 min,
Table rotating speed (milling) : 0.0002-0.2 min,
Table max torque (turning) : 250 KN.m,
Main motor power of turning DC : 125 KW,
Crossrail vertical travel : 4000 mm,
Crossrail elevating speed : 315 mm,
Horizontal travel X axis : 3400 mm,
Max over travel of ram center over plate disc center : 50 mm,
Ram section size : 320 x 320 mm2,
Vertical travel of the ram Z axis : 2500 mm,
Max turning force : 80 KN,
Turning tool bar section : 60x60 mm2,
X, Z axis feed range (stepless) : 0.1-500 mm,
X, Z axis rapid speed : 4000 mm,
X, Z axis A.C. Serve motor (Siemens 1FT6108) : 58 N.m,
Milling spindle rotating speed range : 10-800 min,
AC Milling spindle motor power (Siemens) : 28 KW,
Milling spindle taper : ISO 50,
Total power : 280 KW,
Overall dimension L x W x H : 16.9 x 7.28 x 3.6 mm,
 
  268
IDMA25284
MakeRussian
Model1516F3
YOM1989
ConditionGood Condition
PhotoSee Photo
Single Column, Turning diameter: 1600 mm, Table diameter: 1400 mm, Max workpiece height: 1000 mm, Max table loading: 5000 kg, Max horizontal ram travel: 630 mm, Max horizontal carriage travel: 975 mm, Max vertical ram travel: 700 mm, Max vertical carriage travel: 1000 mm, No of feed carriages: 16, Carriages feed range: 0,07-12,5 mm/rev, Distance between table and ram: 0-1225mm, Fast stroke: 2000 mm/min, Main motor power: 30kW, Speeds range: 4 - 200 rpm, Dimensions: 3190x3360x4100 mm, Weight: 19200 kg, Control : Numerik CNC-H 645.
 
  269
IDMA25145
MakeDorries Germany
ModelSD100/800
YOM
ConditionGood Condition
PhotoSee Photo
Plate diameter : 800 mm,
Maximum admitted diameter : 1300 mm,
Max height of the piece : 1180 mm,
Maximum weight admitted : 4000 kg,
Vertical stroke of the revolving head carriage : 750 mm,
Horizontal stroke of the capstan : 525 mm,
Vertical stroke of crosshead : 850 mm,
Number of the speeds : 24,
Plate speed : 250 mn,
Number of feeds : 16,
Feeds : 8 mm,
Table motor : 30 cv,
Dimensions of the machine : 3900 x 2700 x 3900 mm,
Weight of the machine : 14000 kg.
 
  270
IDMA24896
MakeWMW Niles ,Germany
ModelDKZ4000
YOMRetrofitted 2008
ConditionExcellent condition,under power
PhotoSee Photo
Table size : 4000 mm,
Max turning height : 2000 mm,
Bridge moves in manual mode,
2 x Octagonal rams,
Vertical travel of bridge : 2000 mm,
Ram vertical traverse : 2000 mm,
Ram transversal traverse : 2000 mm,
Variable speeds,
Max weight on table 25 tons,
Weight of machine : 85 tons,
CNC controls 4 axis,
CNC : Fagor 8070
Retrofitted to electrical, motor
 
  271
IDMA24795
MakeCKD Blansko,Czech
ModelSKD32A
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter : 3200 mm,
Max turning diameter : 3500 mm,
Max height of turning over table : 2500 mm,
Max table load : 50,000 kg,
Table motor : 82 kW,
Range 1 : 22 rpm,
Range 2 : 80 rpm,
One carriage CNC and other manual.
 
  272
IDMA24160
MakeSedin Russia
Model1E512PF2I
YOM
ConditionVery nice
PhotoSee Photo
Max. dia of workpiece : 1250 mm,
Max. height : 1000 mm,
Faceplate dia : 1120 mm,
max weight of job: 4 tons
Number of upper supports with turrethead : 1,
MAx, upper support travel:
horizontal : 810 mm,
vertical : 700 mm,
Max, crossrail travel : 660 mm,
Dimensions: 2875x2660x4100 mm
Weight of the machine(with electric box and CNC) : 16.5 tons
 
  273
IDMA24094
MakeNiles-Simmons
ModelVCN160RQQ
YOM2008
ConditionGood Condition
PhotoSee Photo
Face plate diameter : 1500 mm,
Swing diameter : 1800 mm,
Turning height : 720 mm,
Max workpiece weight : 6000 kg,
Turning speed range : 10-325 min,
Max torque on face plate : 38000 Nm,
Feed speeds infinitely variable : 0,01-10 mm,
Rapid travel longitudinal/face : 24 min,
Capacity at 100% load : 155 kW,
Tension force : 400 kN,
Measuring system : metric,
Weight of the machine : 36 ton.
Accessories :-
Chip conveyor,
Cooling device with filter,
Oil dust collection.
With automatic tool change from one 12 pocket tool magazine per tool head.
 
  274
IDMA23934
MakeQiqihar,China
ModelDVT500
YOM2008/2009
ConditionExcellent condition,under power
PhotoSee Photo
Table dia 4500 mm,
Max. Swing dia 5000 mm,
Max. working height 2550 mm,
Working piece weight 32t,
Cutting force of right tool holder 40 Kn,
Cutting force of left tool holder 35 Kn,
Total cutting force 63 KN,
Max. Torque 125 Kn.m,
Table speed 16 steps 1.25-40 RPM,
Infeed of the Ram Continuously 0.1- 500 mm/min,
Vertical travel of the horizontal slide 2750mm,
Travel of the tool holders 2765mm,
Vertical travel of the ram 1250mm,
Size of the ram 240 * 240 mm,
Rapid Travel of tool holder 4000mm / min,
Power of main motor 55KW,
Torque of the AC servo motor drives the travel of the tool holder 48NM,
Swivel of tool holder +/-30,
overall dimension of the machine: 12960x6618x6803 mm (height from the bottom of the foundation 8865).
The vertical axis of the rams are equipped with Ball screws and AC servo motors
The horizontal axis of the tool holders are equipped with Ball screws and AC servo motors
The horizontal slide’s vertical travel is equipped with T screws.
The machine is equipped with Siemens 802D CNC system on left ram.
Estimated Net Weight: 95T .
 
  275
IDMA23561
MakeSchiess Froriep
Model20DS160
YOM1983/2011
ConditionGood Condition
PhotoSee Photo  |  See Video
Working area :
Max turning diameter : 2000 mm,
Max turning height : 1600 mm,
Table diameter : 1600 mm,
Max table load : 11200 kg,
Power : 71 kW,
Crossrail travel adjustment : 1170 mm,
Speed face plate : 2.5-250 min - 1,
Feed X and Z : 0.1 1000 mm,
Fast traverse X and Z : 6 m / min,
Electric connected load : 90 kW,
Voltage : 50 Hz 400 V,
Dimensions L x W x H : 10000 x 6000 x 8500 mm,
The machine has hydrostatic guidance,
Machine of the weight : 22 to.
Accessories :
Chip transfer system around the face plate a chip conveyor to life it up the chips to a hopper,
2 Swiveling front doors,
Coolant system incl. coolant tank and pump.
Control : Sinumerik 840 D.
 
  276
IDMA23373
MakeChinese
Model
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table dia : 7200 mm,
Max. Swing : 8300 mm,
Turning height : 6000 mm,
Max. workpiece weight : 200 Tons,
Main motor power : 200 kW,
Table speed : 0.2 – 20 RPM (Steepless),
Machine Weight : 290 Tons,
1 Vertical Ram : Siemens 802 CNC,
1 Vertical Ram : Conventional,
Cutting force of left tool holder : 85 kN,
Cutting force of right tool holder : 120 kN,
Torque of table : 240 Kn.m,
Left tool holder travels : Horizontal 4250 mm, Vertical 2750 mm,
Right tool holder travels : Horizontal 4250 mm, Vertical 2750 mm,
Rapid travel of tool holders : 400 mm/min,
Travel of the horizontal slide : 2750 mm,
Ram Size : 320 x 320 mm.
 
  277
IDMA23236
MakeDoerries Scharmann
ModelVCE2800/250MC
YOM2011
ConditionGood Condition
PhotoSee Photo
Faceplate diameter : 2500 mm,
Swing diameter : 2800 mm,
Turning height : 2100 mm,
Drive of faceplate : 100 kW,
Cross rail adjustment vertical : 800 mm,
Max ram stroke : 1500 mm,
Ram head dimension : 250 x 250 mm,
Faceplate turning speed range : 1-224 min,
Workpiece weight : 25000 kg,
Feed speeds : 0-18000 mm,
Adjustment speed of cross rail : 400 mm,
Cutting capacity : 50000 N,
Control Bosch Rexeoth MTX,
C axis 1/1000 grad,
Milling spindle turning speed 1-3000 min,
Spindle taper : SK 50,
Power capacity milling spindle : 37 kW,
Coolant,
Tool changer : 2 STK,
Chip conveyor,
Total power requirement kw.
Dimensions of the machine ca. : 13,5 x 7 x 7,2 mm,
Weight of the machine : 73 t.
 
  278
IDMA22649
MakeSchiess,German
ModelKZ250
YOM1958/2003
ConditionVery good condition
PhotoSee Photo
Faceplate diam 2.500 mm,
Swing diam 2.700 mm,
Main spindle power 55 kW,
Faceplate speed 110 rpm,
Gear steps 2,
Ram stroke 1.200 mm,
Cross rail 1.200 mm,
Workpiece high max 2.000 mm,
Workpiece weight max 10.000 kg,
Control Heidenhain manual plus 4110.
 
  279
IDMA22404
MakeTitan Romania
Model57-65
YOM2008
ConditionGood Condition
PhotoSee Photo
Table Diameter 1427 mm,
Maximum Turning Diameter 1625 mm,
Maximum Turning Height 984.25 mm,
Cross Rail Vertical Travel 675 mm,
Ram Vertical Travel, Z-Axis 984.25 mm,
Ram Horizontal Travel, X-Axis 1475 mm,
Ram Cross Section 250 mm x 250 mm,
Table Speeds 1-250 RPM,
Number of Geared Ranges 2,
Table Load Capacity 17,600 Lbs,
Maximum Torque at Table Diameter 4800 Lbs-Ft,
Cutting Force 1826 Lbs,
Cutting Feeds X/Z Axes 0.039-236 IPM,
Rapid Traverse Rate X/Z Axes 236 IPM,
Cross Rail Elevation 16 IPM,
Power Source 80 KVA,
Machine Dimensions (W x D x H) 4425mm x 3150mm x 4625mm,
Approximate Machine Weight 43,230 lbs.
Qty : 3nos.
 
  280
IDMA22201
MakeRussian
Model1510F3
YOM
ConditionGood Condition
PhotoSee Photo
dia 1000 mm, CNC ECIESSE
 
  281
IDMA22158
MakeTitan Romania
ModelSC17
YOM1995/2009
ConditionGood condition,under power
PhotoSee Photo
Table dia : 1450 mm,
Max Swing : 1650 mm,
Max working height : 1100 mm,
Max weight on table : 11000 KG,
Main motor power (D.C. MOTOR) : 60 KW,
Table Speeds - N. 3 Ranges 0 ÷ 225 RPM,
N.1 Ram type vertical tool :-
Vertical Travel : 1000 mm,
Horizontal travel : 1000 mm,
Ram section : 224 x 224 mm,
Indexed Crossrail travel : 750 mm,
Working feeds : 0 ÷ 5.000 MM/MIN,
Overall dimensions : 5000 x 4000 x 5100 H mm,
Total Weight : 23 tons,
Complete with :-
12 seats atc,
Toolhoders.
Control : CNC FAGOR 8055 TPLUS.
 
  282
IDMA21981
MakeSchiess,German
Model
YOM1976
ConditionGood condition,under power
PhotoSee Photo
Table dia : 3600 mm, Swing dia : 4500 mm, Turning height : 3000 mm, Table load : 80 Tons, Sentrol 2 NC System.
 
  283
IDMA21970
MakeHomma
ModelTAC17F
YOM1988
ConditionGood Condition
PhotoSee Photo
Table Size : 1700 mm (Twin Table), Swing dia : 1800 mm, Working height : 1000 mm, Table load : 6 Tons, X axis travel : 150 - 1150 mm, Z axis travel : 800 mm, With ATC & Fanuc 10T CNC Control.
 
  284
IDMA21934
MakeCarnaghi
Model
YOM2000
ConditionGood Condition
PhotoSee Photo
Turning Diameter : 6500 mm,
Table diameter : 6000 mm,
Work Height : 1600 mm
Table speed : 49 rpm
Tool Changer : 40 pcs,
Live Tool on Ram : no live tools include in price,
Fanuc 160i-T CNC Control,
Full C-Axis on table.
 
  285
IDMA21933
MakeKolomna Russia
Model1540
YOM
ConditionGood condition,under power
PhotoSee Photo
Diameter of workpiece 4000 mm, Height of workpiece 2000 mm, Diameter of a faceplate 4000 mm, Max. slider stroke 1250 mm, Right slider type turning , Left slide rtype combinated , Corner of supports turn 15 +40, Weight of the workpiece on a faceplate 63 tons ,Effort of cutting to a right support 63 kH. Effort of cutting to the left support 50 kH. The max total effort of cutting by two supports 100 kH. Table speeds: 0.52 - 48.7 rpm . Feeding 0,059 - 470 mm/min. Rapid feeding 2715 mm/min . Capacity of the main drive 125 kw. Height above a level of a floor 6000 mm. Dimensions (lenght-width-height) 5900 x 10100 x 7200 mm , Machine weight 100 tons.
CNC control :Delta Dynapath CNC control.
Equipped with 2 Rams, 1 Ram controlled by CNC.
 
  286
IDMA21917
MakeSchiess Froriep
Model
YOM1965/2001
ConditionExcellent
PhotoSee Photo
Table Diameter : 3.500 mm
Max Work Diameter 4000 mm,
Height 3000 mm,
Table load 30 Ton,
Motor 71 kW,
Table speeds 42 rpm.
CNC Control : Siemens 840C control.
With AC spindle and axis drives, single ram, interlock system.
Machine was used for production of parts of power plants.
 
  287
IDMA21847
MakeKorea
ModelNSRI7585
YOM
ConditionBrand New
PhotoSee Photo
turning dia 8500 mm, turning height 750 mm, max torque 200 kN.m , max cutting force 60 kN, max cutting depth 17 mm, max workpiece weight 30 tons , table dia 7500 mm, table speeds 0.5-40 RPM , table speed range stepless, Ram head croos section 350 x 400 mm, travel and feedrate: X R4450 , L2480 mm, Z 750 mm, X/Z cutting feed rate 0-500 mm/min , X/Z rapid traverse 8000/10000 mm/min , Bearing: Bearing size : table (upper) 220 mm, table(low) 130 mm, ram 60 mm, Motor : table DC motor 92kW, X/Z axis servo motor X:7 , Z:9 kW, power source : input power supply 220V, power capacity 135 KVA, Driving way : ram base (X) timing belt, ram(Z) coupling, Controller Fanuc 0it, Ram (350 x 400) FC-300/2.8 , ram base FC-300/2.5, Material and weight : column Steel/14, cross rail Steel/18, table FC300/40 , bed Steel/35, total weight 128 tons.
 
  288
IDMA21651
MakeChinese
ModelDVTCK5263
YOM
ConditionBrand New
PhotoSee Photo
Table dia : 5000 mm, Max. Turning dia over vertical tool post : 6600 mm, Max. turning height : 4000 mm, Max. weight of workpiece : 80 Tons, Max. cutting force of right tool post : 80 Kn, Max. cutting force of left tool post : 70 Kn, Max. total cutting force : 150 Kn, Max. torque of table : 150 Kn.m, Table Speed : 0.5 - 40 r/Min (two gear), Feeding stage number : AC servo steepless, Feeding range : 0.1 - 2000 Mm, Level stroke of tool post : 3450 Mm, Vertical stroke of tool post : 2000 mm, Beam moving speed : 380 mm/min, Tool rest rapid traverse speed : 4000 mm/min, Max. swivel angle of tool post : ±30, Acuurcay of positioning : 0.03 mm, Accuracy of repeatability of positioning : 0.015 mm, Machining accuracy : IT7, Main motor power : 75 kW (DC); Overall Size : 8100 x 13080 x 8520 mm (L*W*H), Machine Weight : 127 Tons, Siemens 802DSL System.
 
  289
IDMA21643
MakeQiqihar,China
ModelDVT630X50/80L-NC
YOM
ConditionBrand New
PhotoSee Photo
Max turning dia 6300 mm,
Max table dia 5700 mm,
Max workpiece height 5000 mm,
Max workpiece weight 80T,
Speed range of table:
Speed range for turning (two steps, stepless) 0.25~25r/min
Max torque of table 315 KNm,
Rapid travel of ram 4000 mm/min,
Feed step of railhead stepless,
Left railhead feed range 0.1~1000mm/min,
Right railhead feed range 0.1~500mm/min,
Max cutting force of right turning railhead 80KN,
Max cutting force of left turning railhead 63 KN,
Total cutting force of railheads 125 KN,
Max travel of railhead :
Max horizontal travel -50~3400 mm,
Max vertical travel 2500mm
Ram section 320 x 320 mm,
Max travel of the crossrail 3000 mm,
Elevating speed of the crossrail 300mm/min,
Power of the elevating motor of the crossrail 37Kw,
Power of the main motor 110Kw,
CNC system 840D.
 
  290
IDMA21595
MakeQiqihar,China
ModelDVT1250x50/250LNC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max turning dia 12500 mm,
Table dia 8000 mm,
Ram section 400x400mm,
Vertical travel of ram 2500mm,
Horizontal stroke of railhead -50—6570 mm,
Max height of turning 5000 mm,
Loading capacity 250 tons,
Tool bar section 100x100 mm
Railhead cutting force 10 tons,
Max. table torque 640 KN.m,
Table speed step stepless
Table speed range 0.16—16 rpm
Feed range 0.1—1000 mm/min
Rapid travel of railhead 4000 mm/min
Crossrail stroke 4000 mm
Elevating speed of crossrail 300 mm/min
CNC type double column vertical lathe without motors, drives, electrical device, CNC system etc.
 
  291
IDMA21499
MakeFroriep
ModelV203
YOMRetrofitted 2000
ConditionGood Condition
PhotoSee Photo
Double Column - NC, Table diameter: 5000 mm, Table Capacity: 80 ton, Max. turning diameter: 5300 mm, Max. height of workpiece: 3500 mm, Max. weight of workpiece: 80 ton, Table speed RPM min 1 to max 20, Main motor power: 125 HP, Vertical travel of ram head: 1500mm, Machine Weight: Approx. 155 ton. Ram size, Vertical ram swivel angle, NC Control: SENTROL 2.
 
  292
IDMI5479
MakeNiles,USA
Model
YOM
ConditionVery good condition,Under power
PhotoSee Photo
Chuck Dia. 3950 mm,
Swing 4200 mm,
Height 2200 mm,
Table load capacity 17 tons,
Spindle motor 50 kW.
Sinumerik 802D CNC system with
PCU 210 with 10” TFT color operator panel,
PLC I/O for machine auxiliary functions,
Machine control panel,
MPG with box.
Simodrive drive system including
Servo motor with 27Nm torque and speed for X axies.
Servo motor with 27Nm torque and speed for Z axies.
Suitable drive system for above.
Ballscrews Details:
1) C5 class for X axies ( Dia 78mm )
Make – Rexroth Star
2) C5 class for Z axies ( Dia 60mm )
Make – Rexroth Star.
 
  293
IDMA21200
MakeTitan Romania
ModelSC43H
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table dia : 4000 mm, Swing dia : 4250 mm, Max. working height : 3000 mm, Max. table load : 35 Tons, ATC : 12 tools, Siemens/Fanuc CNC Control. Delivery : 8 Months
 
  294
IDMA21100
MakeBullard,USA
Model
YOM
Conditionretrofitted completely
PhotoSee Photo
Table Diameter 1650 mm,
Maximum Swing 1950 mm,
Maximum Height Under Rail 1450 mm,
Spindle: Speeds (low range) 5-30 RPM ,
Speeds (high range) 20-135 RPM ,
Motor 75 HP ,
,
Head(s): Number of Heads (cnc controlled) One
Type Head(s) Turret Head (4-Pos.) ,
Travels: X-Axis (Cross) Soft Travel Limits +79.8”, -70.2”
Y-Axis (Vertical) Soft Travel Limits +.17”, -23.87”
General: Floor space (with door swings) (W x D x H) 7000 x 4000 x 5125 mm,
Weight 80,000 Lbs ,
Chuck face from floor 950 mm,
-
Equipped With:
GE Fanuc O-T control
1650 mm dia. 4-jaw independent chuck ,
4 station turret hydraulic / unidirectional
68.75 mm bore, 100 mm dia. tool holder capacity
Sony glass scales positioning
Fanuc axes motors
56.25 mm Ball Screw X/Z .
Assorted tool holders and jaws
 
  295
IDMA21093
MakeRafamet Polish
ModelF217
YOMRetrofitt in 2004
ConditionGood condition,under power
PhotoSee Photo
Table dia : 3125 mm, Swing dia : 4200 mm, Height under rail : 1900 mm, Table speed : 1 - 60 RPM, Motor power : 130 HP, Fanuc 21iT CNC Control, With Thread Cutting.
 
  296
IDMA21089
MakeChinese
ModelDVTCK5263
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table dia : 4300 mm, Max. Turning dia over vertical tool post : 6300 mm, Max. working height : 3200 mm, Max. weight of workpiece : 50 Tons, Max. cutting force of right tool post : 50 Kn, Max. cutting force of left tool post : 40 Kn, Max. torque of table : 100 Kn.m, Table Speed : 0.5 - 40 Mm (two gear), Feeding stage number : AC servo steepless, Feeding range : 0.1 - 2000 Mm, Level stoke of tool post : 3450 Mm, Vertical stroke of tool post : 1600 mm, Beam moving speed : 380 mm/min, Tool rest rapid traverse speed : 4000 mm/min, Max. swivel angle of tool post : 30(+-) Deg, Acuurcay of positioning : 0.03 mm, Accuracy of repeatability of positioning : 0.015 mm, Machining accuracy : IT7, Main motor power : 75 kW (DC); Overall Size : 8100 x 13080 x 8520 mm (L*W*H), Machine Weight : 118 Tons, Siemens 802DSL System.
 
  297
IDMA21061
MakeHomma
Model
YOM
ConditionGood condition,under power
PhotoSee Photo
Table dia : 4300 mm, Max. swing dia : 6000 mm, Cutting dia : 5250 mm, Working height at present : 1600 mm, Max. turning height possible when add support to columns : 4500 mm, Motor power : 104 kW, Table speed : 35 RPM, Max. load on table : 50 Tons, Vertical travel of ram head (Z axis) : 2500 mm, Ram size : 365 mm, Fanuc OT NC Control, Accuracy : 0.01 UM/IM.
 
  298
IDMA21053
MakeBerthiez France
Model
YOM1985
ConditionGood condition,under power
PhotoSee Photo
Table dia : 2500 mm, Swing dia : 5500 mm, Turning height : 2000 mm, Ram stroke : 2000 mm, Table speed : 120 RPM, Main motor : 60 HP (DC), Fanuc OT CNC Control.
 
  299
IDMA20932
MakeGray
Model
YOMretrofited in 2007
ConditionGood Condition
PhotoSee Photo
Swing Dia. 1500 mm,
12 Stations tool holder,
Control : Fanuc 0i.
 
  300
IDMA20833
MakeStanko-Russia
Model
YOM
ConditionGood Condition
PhotoSee Photo
Swing 3300 mm,
Table 3000 mm,
Height 1800 mm,
FANUC 0T CNC System.
 
  301
IDMA20536
MakeChinese
Model
YOM2009
Conditioncan be inspected under power
PhotoSee Photo
Table : 6000 mm,
Max. swing : 6300 mm,
Max. working height : 4000 mm,
Working piece weight : 60 ton,
Power of main motor : 75 kW,
Machine weight : 130 ton.
CNC 6300MMVTL.
 
  302
IDMA20440
MakeCKD Blansko,Czech
ModelSKD50/53D
YOM
ConditionBrand New
PhotoSee Photo
Table diameter : 4770 mm,
Max. turning diameter 5300 mm,
Max. height of turning over table 4000 mm,
Table - max. load 100,000 kg,
Max. Torque - 210 kNm,
Rotary table drive motors : 2 x 71 kW,
Speed infinitely variable : 0,5 – 50 rpm,
(2 grades) hand operated stretch of parts by 8-jaw table,
Axial hydrostatic bearing, cooling of oil FRIGERA 30 kW,
Cross rail – vertical travel 3300 mm,
Main drive - motor 2 x 71 kW – Siemens AC (system MASTERSLAVE),
Heads - R.H. rail head cross section of ram 340 x 340 mm,
vertical ram travel “Z” - 2500 mm,
Feeds 0,1 – 8 000 mm.min,-1
Overall dimensions :
Length : 12,500 mm
Width : 9000 mm
Height : 11,600 mm (total)
Height over floor : 10,525 mm,
Machine Weight : 130 Tons,
Heads – The axis “x” and “z” are controlled by CNC,
Type Siemens
Operators platform
Electrical equipment – supply mains 3x400V 50/60 Hz, CNC control system Siemens with Handy operator panel,
3 controlled axes – x, z, c,
Linear measuring for control axes – HEIDENHEIN,
B 1.1 – Spindle speed for rotary tool 2 – 3000 rpm ( 2 grades), A
C spindle motor ,
Siemens 37,7/48 kW,
spindle taper ISO 50,
B 2.4 – automatic tool changer for R.H. with tool 6 tool holder for turning and 18 position for rotary tools,
B 3.1 – Basic turning tool holder 1 pc,
B 7.1 – 2 – segment chip conveyer round the table,
B 8.1 – Coolant attachment standard,
B 9 – Safety fence of the table with inspection holes, height 2,2 m,
C 1 – Spare parts for 2 years production,
Machine painting in color combination of RAL 6011 and RAL 2003,
Remote diagnostic,
Standard accessories,
Technical documentation,
Overseas packaging.
 
  303
IDMA20142
MakeTitan Romania
ModelSC125/160D
YOM1987
ConditionExcellent
PhotoSee Photo
Table diameter - 10,000 mm, Max. workpiece diameter : with column in normal position - 12,500 mm, with max. column displacement - 16,000 mm, Max. workpiece height - 5,500 mm, Max. workpiece weight - 400,000 Kg, Milling spindle rotation - 1.0-630 min., Spindle diameter - 225 mm, Taper: ISO 50, Source voltage - AC 380/50 V/Hz, Source voltage for the controller - AC 220/50 V/Hz, Milling spindle rotation - 1.0-630 min, Machine dimensions : lenght: 26,154 mm, width - 17,514 mm, height : above floor level - 15,300 mm, below floor level - 4,340 mm, Machine weight - 850,000 kg, Right cross slide (turning) : Vertical slide movement - 3,500 mm, Slide crosscut - 500x500 mm, Angle of rotations (in both directions) - 0-30°, Right cross slide (turning) Sinumerik 7T Siemens, Measuring element Linear encoder for axis: X, Z , Control axis 2 (X, Z), Working feed range: 0,005-200 mm, 0,5-2400 - mm/min, Linear interpolation - 0.01, Circular interpolation: G 02, G 03, Step: 0.005-200 mm, Manual feed: 0.4-800 mm/min, Rapid feed: 2400 mm/min, Left cross slide (milling) : Vertical slide movement: 2,500, mm, Max. slide cuting force: 10000 kg, Slide crosscut: 500x500 mm, Angle of rotations (in both directions): 0-30°, Left cross slide (milling) Sinumerik 7M Siemens, Measuring elementLinear encoder for axis: V, W, Angle encoder for axis: C, Control axis: 3 (V, W, C), Working feed range: 0.5-2400 mm/min. (V, W), 0.02-96°/min. (C), Extended feed range: 0-2000 ÷ 120% , Rapid feed - 2400 mm/min, 96 °/min. (C), Linear interpolation: G 01, Normal feed : 0.4-800 mm/min. (V, W), 0.016-32 °/min. (C), Rapid feed
2400 mm/min. (V, W), 96 °/min. (C), Circular interpolation: G 02, G 03, Step: 0.005-20 mm.
 
  304
IDMA20037
MakeQiqihar,China
Model
YOM
ConditionBrand New
PhotoSee Photo
Max. swing 2500 mm,
Max. working height 1250 mm,
Working piece weight 16t,
Table 2250 mm,
Main gear box 2 step continuously variable,
Table speed range 1,6-200 RPM,
Max. torque of table 35 kn.m,
Accuracy of the table (radial and end) 0.005 mm,
Main motor 75 kw,
No. of rams 2,
No. of ATC 2,
Tool positioning of ATC 12,
Cutting force of right tool holder 35 kn,
Cutting force on left tool holder 28 kn,
Tool cutting force 56 kn,
Vertical traveling of the rams 1250 mm,
Rapid travel speed of tool holders (X axis) 8000 mm/min,
Rapid travel speed of tool holders (Z axis) 8000 mm/min,
Horizontal traveling of the tool holders -20-1450 mm,
Infeed of tool holders (X and Z axis)Continuously 0.1-1000 mm/min,
Size of the ram 240 x 240 mm,
CNC System Fanuc 18i,
Tool Measuring System Renishaw (UK).
 
  305
IDMA20021
MakeChinese
ModelCK52100E50/150
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table - 8000 mm, Max Swing - 13000 mm, Max working Height - 5000 mm, Working Piece weight - 160 ton, Cutting force of head - 100 Kn (conventional), Cutting force Head - 80 Kn (CNC), Total Cutting Force - 160 Kn, Max. Torque of Table - 400 KN.m, Step of Table - 4, speed change of table - 0.23-14 RPM, Rapid traverse of carriage - 1500 mm/min, Max. travel of head (X) - -50 - 5150 mm, vertical Travel of the ram - 2500 mm, Size of the ram - 310 x 310 mm, tool holder feeding / range - step less / 0.1-500 mm / min, Power of main motor - 110 KW, Max. travel of crossrail - 4500 mm, Elevation speed of crossrail - 230 mm/min, power of crossrail elevating motor - 22 kw, Weight of machine - 320 ton, One ram is equip with CNC system, system brand are choice of clients.
 
  306
IDMA20020
MakeChinese
ModelCK52100E50/150
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table - 8000 mm, Max Swing - 10000 mm, Max working Height - 5000 mm, Working Piece weight - 150 ton, Cutting force of head - 100 Kn (conventional), Cutting force Head - 80 Kn (CNC), Total Cutting Force - 160 Kn, Max. Torque of Table - 400 KN.m, Step of Table - 4, speed change of table - 0.23-14 RPM, Rapid traverse of carriage - 1500 mm/min, Max. travel of head (X) - -50 - 5150 mm, vertical Travel of the ram - 2500 mm, Size of the ram - 280 x 280 mm, tool holder feeding / range - step less / 0.1-500 mm / min, Power of main motor - 110 KW, Max. travel of crossrail - 4400 mm, Elevation speed of crossrail - 230 mm/min, power of crossrail elevating motor - 15 kw, Weight of machine - 310 ton, One ram is equip with CNC system, system brand are choice of clients.
 
  307
IDMA20019
MakeChinese
ModelCK52100E50/120
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table - 7100 mm, Max Swing - 10000 mm, Max working Height - 5000 mm, Working Piece weight - 120 ton, Cutting force of head - 90 Kn (conventional), Cutting force Head - 70 Kn (CNC), Total Cutting Force - 160 Kn, Max. Torque of Table - 400 KN.m, Step of Table - 4, speed change of table - 0.23-14 RPM, Rapid traverse of carriage - 1500 mm/min, Max. travel of head (X) - -50 - 5150 mm, vertical Travel of the ram - 2500 mm, Size of the ram - 280 x 280 mm, tool holder feeding / range - step less / 0.1-500 mm / min, Power of main motor - 90 KW, Max. travel of crossrail 4400 mm, Elevation speed of crossrail - 230 mm/min, power of crossrail elevating motor - 15 kw, Weight of machine - 210 ton, One ram is equip with CNC system, system brand are choice of clients.
 
  308
IDMA20017
MakeChinese
ModelCK5263E
YOMBrand New
ConditionBrand New
PhotoSee Photo
Table - 5000 mm / 5700 mm, Max Swing - 6300 mm, Max working Height - 4000 mm, Working Piece weight - 50 ton, Cutting force of right tool holder - 60 Kn, Cutting force of left tool holder - 43 Kn, Total Force - 100 Kn, Max. Torque - 100 KN.m, Table speed - 0.4-26 RPM, Infeed of the Ram - Continuously 0.2 - 500 mm / min, Vertical Travel of the Horizontal slide - 3000 mm, Travel of the tool holders - -50-3300 mm, Vertical Travel of the ram - 2000 mm, Size of the ram - 270 x 270 mm, Rapid travel of tool holder 2000 mm/min, Power of main motor - DC 75 KW, Torque of the AC servo motor drives the travel of the tool holder - 30 NM, One ram is equipped wtih servo motors, ball screws on X and Z azis, and Siemens 802 D CNC system, Estimated Net Weight - 130 Ton.
 
  309
IDMA20005
MakeNamsun
ModelTL7585
YOM
ConditionBrand New
PhotoSee Photo
Capacity : 30000 kg.
Turning Table : out dia. - 7500 mm,
Work Size :
Out dia. 8500 mm,
In dia. 1000 mm,
Height : 835 mm,
Travel/speed : X= 3800x2(R/L) mm,
Y= 750x2(R/L) mm,
Speed :
X= 0-3000 mm/min,
Y= 0-1200 mm/min,
Table = 0-50 rpm,
Motor :
X= 7.5(AC)kw,
Y=5.5(AC) kw,
Table = 75(DC)kw,
Hydraulic = 15(AC)kw,
Lubrication = 100x2w,
Hydraulic system :
Tank capacity 300 L,
Max. Pressure 140 kg/cm2,
Setting Pressure 90 kg/cm2,
Coolant MQL type,
CNC system Fanuc 0iT.
 
  310
IDMA19991
MakeChinese
ModelCK5216
YOM
ConditionBrand New
PhotoSee Photo
Chuck Dia. 1400 mm,
Max. workpiece dia. 1600 mm,
Max. workpiece Height 500 mm,
Max. workpiece Weight 3.1 mm,
Workprecision:
Roundness 0.001,
Cylindricity 300: 0.02,
Flatness 0.03,
Chuck Rotary Speed : 2.5-55 r/min,
Power of Main Motor 18.5 kW,
Max. Torque Worktable 3 kn.m,
External Dimension 2800 x 2225 x 2760 mm,
Total Weight 8.6 Ton.
 
  311
IDMA19990
MakeChinese
ModelCK5212
YOM
ConditionBrand New
PhotoSee Photo
Chuck Dia. 1000 mm,
Max. workpiece dia. 1250 mm,
Max. workpiece Height 400 mm,
Max. workpiece Weight 2 mm,
Workprecision:
Roundness 0.005,
Cylindricity 300: 0.02,
Flatness 0.02,
Chuck Rotary Speed : 3-64 r/min,
Power of Main Motor 11 kW,
Max. Torque Worktable 1 kn.m,
External Dimension 2150 x 1775 x 2425 mm,
Total Weight 6.2 Ton,
Fanuc Oi-Mate TC Control.
 
  312
IDMA19958
MakeChinese
ModelCK5220
YOM
ConditionBrand New
PhotoSee Photo
Max.turning diameter - 6300 mm,
Diameter of worktable - 4300 mm,
Max.height of workpiece - 3150 mm,
Max.weight of workpiece - 50 ton,
Max.Torque of table turning - 100000 Nm,
Right tool head machining capacity 50000 N,
Left tool head machining capacity 40000 N,
toolpost : One manual one CNC,
Speed steps of workable (stepless) 2 steps,
Speed of worktable r/min - 0.5-40,
Horizontal traverse of tool head 3450,
Vertical traverse of tool head 1600 mm,
Rapid traverse speed of tool head 4000 mm/min,
Rapid traverse speed of cross rail 380 mm/min,
Main motor power - DC/75 kW,
CNC system Siemens 802C,
Machine weight - 118 ton.
 
  313
IDMA19933
MakeSedin Russia
Model1525F3
YOM
ConditionGood Condition
PhotoSee Photo
Max. workpiece diameter 2500 mm Max. workpiece height 1600 mm Diameter of faceplate 2240 mm Max. weight of workpiece 16000 kg Max. cross section height 63 mm Max. ram stroke of upper supports - horizontal 1390 mm Max. ram stroke of upper supports - vertical 1200 mm Number of steps of faceplate revolutions 18 Number of revolutions of faceplate 1,6-801,25-63 rpm Support feed - number of steps 18 Speed of cross rail adjustment 360 mm/min. Working feeds of the supports in each axis 0,04-16 mm/u Max. rapid adjustment speed of support 2 m/min. Max. adjustment of cross rail 1240 mm Max. cutting force - for the right upper support 42,5 kH Max. cutting force - for the left upper support 33,5 kH Max. cutting force - totally 67,0 kH Max. torque of the faceplate 50 kNm Motor 45 kW Weight of the machine - with electric equipment 35500 kg Weight of the machine - without electric equipment 34000 kg Height of the machine 5100 mm Width of the machine 6420 mm Depth of the machine 5070 mm .Russian Balt Sistema CNC NTS230
 
  314
IDMA19837
MakeChinese
ModelSVT200x16/12QNC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max turning dia 2000 mm,,
Max height of turning 1600 mm,
Loading capacity 12t,
CNC system SIEMENS 802D
.
 
  315
IDMA19820
MakeChinese
ModelCK5120B
YOM
ConditionBrand New
PhotoSee Photo
Max. Turning dia. 2000 mm
Table dia. 1600 mm,
Max. Turning height 1600 mm,
Max. Load capacity 11.2t,
Max. Torque 25KN.m,
Max. cutting force of railhead 40 kn,
Speed range of the table 2.5~250 rpm,
Feed rate of railhead and ram 0.1~2000 mm/min,
Rapid movement speed of railhead 6000 r/min,
Horizontal travel of railhead 1400 mm,
Max. Travel of railhead and ram 1400 mm,
Travel of crossrail 1000 mm,
Elevate speed of crossrail 300 mm/min,
Ram section 210×250 mm2,
Section size of toolbar 40×40 mm2,
Max. over travel of ram center overtable center 150 mm,
Main motor power 55 kW,
Machine weight 26t.
control : Siemens 802D system with 10.4” display.
 
  316
IDMA19813
MakeToshiba Japan
ModelTSS20/40B
YOM1993
ConditionGood Condition
PhotoSee Photo
Table dia - 2000 mm, Max cutting dia - 4000 mm, Max cutting height - 2600 mm, Fanuc 15T control, 12 tool ATC.
 
  317
IDMA19812
MakeGray
ModelRingmaster
YOM
Conditionremanufactured
PhotoSee Photo
Table - 1500 mm, Swing - 1700 mm, GE FANUC 0i CONTROL, Under Rail - 1625 mm, 5-300 RPM, 50 H.P. POWER TURRET, COOLANT.
 
  318
IDMA19797
MakeQiqihar,China
ModelDVT500
YOM2007
ConditionGood Condition
PhotoSee Photo
Table dia - 4500 mm, Max swing - 5000 mm, Mac cutting height - 2500 mm, Load capacity on table - 32 ton, Main motor - 75 kw DC, CNC Control - Sentrol 2 for X,Z axis (Korean CNC control).
 
  319
IDMA19774
MakeDorries-Scharmann
ModelCVE2800/200
YOM1992
ConditionExcellent
PhotoSee Photo
Table - 2000 mm, Turning - 2800 mm, Height - 1430 mm, system - SINUMERIK 880T, Angular Milling Head.
 
  320
IDMA19519
Make
ModelGCK5263
YOMBrand New
Conditioncan be inspected under power
PhotoSee Photo
Max.turning diameter - 6300 mm, Diameter of worktable - 4300 mm, Max.height of workpiece - 3150 mm, Max.weight of workpiece - 50 ton, Max.Torque of table turning - 100000 Nm, EQUIPPED WITH - 2 Toolposts (workheads) One manual and one CNC Speed steps of worktable (stepless) 2 steps, Speed of worktable r/min - 0.5-40, Main motor power - DC/75 kW, CNC system Siemens 802C, Machine weight - 118 ton.
 
  321
IDMA19518
Make
ModelGTC2500
YOMBrand New
Conditioncan be inspected under power
PhotoSee Photo
Max turning diameter - 2500 mm, Faceplate diameter - 2000 mm, Max turning height - 2000 mm, Automatic toolchanger for 12 tools, Including coolantplant and chipconveyer, Siemens CNC, Heidenhain measuringsystem, CE-marked.
 
  322
IDMA19517
Make
ModelGTC1600
YOMBrand New
Conditioncan be inspected under power
PhotoSee Photo
Max turning diameter - 1600 mm, Faceplate diameter - 1250 mm, Max turning height - 1200 mm, Automatic toolchanger for 12 tools, 12 toolholders included EQUIPPED WITH - Coolantplant and chipconveyer, SIEMENS CNC, HEIDENHAIN measuringscales, CE-marked.
 
  323
IDMA19404
MakeRussian
Model1A512F3
YOM90s
Conditiongood mechanical condition
PhotoSee Photo
Table diameter 1120 mm, Max. turning diameter 1250 mm, Max. workpiece height 1000 mm, Max. workpiece weight: 3200 mm (5…80 rpm), 1000 mm (250 rpm), Max. swivel angle (upper carriage) 45°, Max. vertical feed (side carriage) 1000 mm, Max. ram travel: upper carriage 630 mm, side carriage 700 m, Number of tool posts in turret head 5, Number of ranges of table speeds 18, Table speed: min. 5 rpm, max. 250 rpm, Number of ranges of carriage feeds 16, Carriage feed: min. 0,07 rpm, max. 12,5 rpm, Main motor power 30 kW .
 
  324
IDMA19355
Make
ModelSC25-33
YOM1986
ConditionVery good condition
PhotoSee Photo
Max. machining dia. - 3300 mm, Plate dia. - 2500 mm, Max. machining height - 1900 mm, Workpiece weight - 15.000 kg, Machine weight - 43 tons, Table speed 1 - 112 rpm, Main motor - 55 kW, Left support vertical travel - 1200 mm, Right support vertical travel - 760 mm (is turret head 5 position manually changed not by CNC).
 
  325
IDMA19338
MakeQiqihar,China
ModelDVTM500 x 40/50LNC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max. turning dia 5000 mm,
Table diameter 4500 mm,
Max. height of workpiece 4000 mm,
Max. weight of workpiece 50 tons,
X axis travel -50-2765 mm,
Z axis travel 2000 mm,
Ram section 280x280 mm
Max. cutting force of railhead 40 KN,
Table speed range 0.4-40 r/min for turning,
0.0002-0.2r/min for milling index
Max. torque of table 200 KN.m
Main motor power 90 kw for turning
S1=17KW, S2=22.5kw for milling, Siemens 840D CNC
 
  326
IDMA19267
MakeBullard,USA
Model
YOMretrofit 2008
Conditionretrofitted completely
PhotoSee Photo
chuck dia 3100 mm, max. swing 3375 mm, max. rail height 3175 mm, ram travel 1775 mm, spindle speeds (infinitely variable).. 1.7 - 66 rpm
main motor 100 hp
minimum hole for ram 300 mm, cross rail travel 1725 mm,
equipped with: 3100 mm 4-jaw chuck
(4) chuck jaws,
chip conveyor,
carousell type toolchanger,
coolant system with guarding,
all available manuals,
misc. tooling, SIEMENS 802D CNC CONTROL
 
  327
IDMA19213
MakeRussian
Model1A512MF3
YOM1988
Conditionexcellent working condition
PhotoSee Photo
Table diameter 1120 mm, Max. turning diameter 1250 mm, Max. workpiece height 1000 mm, Max. workpiece weight: 3200 mm (5…80 rpm), 1000 mm (250 rpm), Max. swivel angle (upper carriage) 45°, Max. vertical feed (side carriage) 1000 mm, Max. ram travel: upper carriage 630 mm, side carriage 700 m, Number of tool posts in turret head 5, Number of ranges of table speeds 18, Table speed: min. 5 rpm, max. 250 rpm, Number of ranges of carriage feeds 16, Carriage feed: min. 0,07 rpm, max. 12,5 rpm, Main motor power 30 kW .
 
  328
IDMA19176
MakeQiqihar,China
ModelSVT125 X 10/5QNC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max turning dia 1250 mm,
Max height of turning 1000 mm,
Loading capacity 5t,
Table dia 1000 mm,
Table Speed range : 3.15 - 400 rpm,
Max. cutting force of railhead : 16 kn,
MAin motor power : AC, 28kw (1PH7),
Siemens 802D.
 
  329
IDMA19175
MakeQiqihar,China
ModelSVT100 X 8/2QNC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max turning dia 1000 mm,
Max height of turning 800 mm,
Loading capacity 2t,
Table dia 900 mm,Siemens 802D.
 
  330
IDMA19174
MakeQiqihar,China
ModelSVT80 x 8/2QNC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max turning dia 800 mm,
Max height of turning 800 mm,
Loading capacity 2t,
Table dia 720 mm,Siemens 802D.
 
  331
IDMA19166
MakeHankook
Model
YOM1993
ConditionGood Condition
PhotoSee Photo
Swing 2500 mm,
Table 2000 mm,
Spindle Motor DC100hp,
CNC System FANUC 0-T
 
  332
IDMA19135
MakeSchiess,German
Model5100
YOMRetrofit 2008
ConditionGood condition,under power
PhotoSee Photo
Table dia 4550 mm ,
Max swing 5100 mm ,
Max. height 3000 mm,
Ram stroke : 1500 mm,
Max. Table load 40 ton ,
Ram size 300 mm ,
main motor 150 HP,
Max Table load 40 ton,
NC SYSTEM SENTROL 2 (Both Rams),
Approx weight 120 ton,
Both rames are can be controlled by CNC.
 
  333
IDMA19133
MakeHomma
Model50/30
YOM1970/Recond 2006
ConditionGood Condition
PhotoSee Photo
Double Column, Table dia 5000 mm, Table Capacity 40 ton, Max swing dia. 5400 mm, Max height 2500 mm, Ram stroke 1500 mm, Max. Table load 40 ton, Table speed RPM min 1 to max 25, Ram size 350 mm, Vertical travel of ram head 1400 mm, main motor 113 HP, Machine weight approx.155 ton. Two vertical rams, Vertical ram swivel angle, One Ram NC Control (Sentrol) and other is not in use.
 
  334
IDMA19048
MakeDorries-Scharmann
Model
YOM1992
ConditionExcellent condition,under power
PhotoSee Photo
SINUMERIK - 880T, Table - 2000 mm, Turning - 2800 mm Height - 1430 mm, Angular Milling Head
 
  335
IDMA19009
MakeBerthiez France
ModelTFM100N
YOM
Conditionretrofitted completely
PhotoSee Photo
Chuck ø (3 jaw, concentric and independent clamping) - 1000 mm, Max. turning diameter - 1200 mm, Turning height - 1000 mm, Chuck load 10 T, Chuck speed (2 ranges) 3,15 to 400 RPM, Motor power 37 kW, Feed rates 0,2 to 360 mm/rev, Ram travel - 1000 mm, Ram section 180 x 180 mm, Rapids 1000 to 3600 mm/min, Equiped With: CNC unit : SIEMENS 840 D (2009), ATC 12 positions, Chip conveyor.
 
  336
IDMA19008
MakeBerthiez France
ModelTFM160
YOMRetrofited in 1997
Conditioncan be inspected under power
PhotoSee Photo
Chuck Ø - 1650 mm, Max. swing Ø - 1880 mm, Max. turning height - 1600 mm, Height from chuck to floor - 696 mm, Vertical travel of cross rail - 1300 mm, Chuck speed 2 to 250 RPM, Main motor power 45 kW, Max. load on chuck 15 T, Ram section 200 x 200 mm, Ram travel - 1000 mm, Saddle travel to the right of chuck centre - 1070 mm, Saddle travel to the left of chuck centre 400 mm, Feed range 0,2 to 360 mm/rev, Rapid traverse 1 to 6000 mm/min, Equiped with: CNC unit : FANUC OTS, 12 ATC, 4 jaw manual chuck, Swarf conveyor, Coolant
Machine guarding.
 
  337
IDMA19004
MakeDoerries Scharmann
Model
YOM1998
Conditioncan be inspected under power
PhotoSee Photo
Chuck diameter - 2800 mm, Max. turning diameter - 2800 mm, Turning height - 2000 mm, Load on chuck 5 T (with pallet change), Load on chuck 25 T (without pallet change), X - 3500 mm, Y - 2800 mm, Ram vertical travel - 1500 mm, Main motor power - 63 kW, Speed ranges 2
Chuck speed 1 - 180 RPM, Ram section 250 x 250 mm, Milling spindle motor power 30 kW, Milling spindle speed 20 - 4000 RPM, Milling spindle taper HSK 100 / 125, Feed rates X and Z axis 0,1 - 3000 mm, Rapids X and Z axis 18 000 mm/min, Feed rate Y axis 6,000 mm/min, Feed rates C axis 0,001 - 1 080°/min.
 
  338
IDMA18818
MakeREM-Romania
ModelSC43
YOM
ConditionBrand New
PhotoSee Photo
Work piece diameter 4.200 mm,Max. height of the part: 1.800 mm,
Work piece weight 20 to, Table diameter: 3.000(4.000) mm,
Table speed for turning 2 + 90 rpm, Turning AC motor 100 kW/"C" motor 100Nm,
for milling "C" axis: 0.002 + 2.5 rpm, Cross rail indexing pitch: 200 mm,
Ram vertical stroke 1.200 mm, Ram cross section: 250 mm x 250 mm,
Feed range 1 + 8.000 mm/min, Feed motor torque (X, Z axes): 22 Nm,
Milling spindle taper bore ISO 50 Main motor for milling spindles: 37 kW,
Milling spindle speed 1-3.000 mm,
CNC equipment GE FANUC 31 i model A,
4 controlled linear axes - X1, X2, Z1, Z2,
3 controlled rotary axes - “C" and 2x ATC,
3 controlled spindles -table and two milling/drilling shafts.
Accessories included :
Clamping jaws 4 ea. Leveling blocks 1 set,
Telescopic covers - cross rail 1 set Outside cooling system 1 set,
Inside cooling system 1 set Turning tool holder 8 ea.
CE safety guard, chips conveyor, enclosure 1 set,
Automatic tool changer - 16 stations 2 ea,
 
  339
IDMA18744
MakeRussian
Model1A516MF3
YOM
ConditionGood Condition
PhotoSee Photo
dia 1600mm,height 1250 mm faceplate dia 1400 mm, max. mass of workpiece 15 tons, max. height of cutting tool section 50 mm, max. stroke of carriage slide 800 mm, no. of tools nests in the magazine 10, faceplate speed (stepless control) 0.8-278 RPM, carriage working feed on each axis:(stepless control): 0.01-100 mm/rev, max. rate of carriage positioning traverse 6000 mm/min., max. cutting force 5 tons, max. faceplate torque 35 kN-m, power of main drive 55 kW, sound level at operators position 80 dB, discreteness of point to point traverse 0.001 mm, weight 27 tons, Control: CNC Siemens 802D/840D.
 
  340
IDMA18669
MakeTitan Romania
ModelSC16000
YOM1987
ConditionGood Condition
PhotoSee Photo
Diameter Swing 16.000 mm
Diameter Table 11.000 mm
Height 6.500 mm
Ram Right, Left 3.500 mm
Section Ram 500 x 500 mm
Diameter spindle Ram left 225 mm tour m. 630 rpm
Capacity 400 Tons
Weight machine 950 Tons
control SIEMENS 857 ( particularly for VTL
developed )
CNC axis C Boring & milling
 
  341
IDMA18621
MakeNiles,USA
Model
YOM1955/2008
Conditioncan be inspected under power
PhotoSee Photo
Max swing : 9260 mm,
Table dia : 7620 mm,
Max height : 5300 mm,
Ram (double) size : 360 360 3200 mm,
Max RPM : 25,
Max Weight : 250 ton,
CNC Control system : Fanuc 18 IT.
Actual swing: 9144 mm,
Maximum height under tool bolders: 5181mm,
Depth of bed under outer table track: 23 ,
Table dia: 7620 mm,
Depth of table over outer track: 609 mm,
Outer track outside dia: 5181mm,
Outer track width: 304 mm,
Inner track outside dia: 1524 mm,
Inner track width: 152mm(6")
Dia. table gear (240T. 1D.P. Helical):6096 mm,
Face of table gear: 254 mm,
Face of crossrail: 1219 mm,
Depth of crossrail between housings: 1752 mm,
Thickness of crossrail at housings: 12 1/2"
Length of crossrail bearing on housings: 1371mm,
Bar Travel: 3048 mm,
Bar across flats of octagon: 355 mm,
Length of bar cap on swings: 2438 mm,
Size of tools: 2 1/2" Sq,
Minimum distance between bar centers:1270 mm,
Minimum diameter both bars can enter simultaneously:1676 mm,
Swivel of bars either side of vertical: 45 degree
saddle bearing on corssrail: 1905 mm,
Diameter of cross feed screws in crossrail:101 mm,
Diameter of bar feed shafts in crossrail: 2 1/2",
Housing body thickness: 406 mm,
Housing front face: 609 mm,
Housing body thickness at counterwelght chamber: 1219 mm,
Housing bearing length on extensions: 3962 mm,
Housing height: 8839 mm,
Diameter of front elevating screws:127 mm,
Diameter of rear elevating screws: 101 mm.
 
  342
IDMA18618
MakeTitan Romania
ModelSC27
YOM1983/2009
ConditionReconditioned
PhotoSee Photo
Max. turning dia : 2650 mm,
Faceplate dia : 2500 mm,
Faceplate speed (stepless) : 1,5 – 112 U/min.,
Max. workpiece height : 1900 mm,
Max. workpiece weight : 15000 kg,
Vertical support :-
Swivel angle : +/- 35 °,
Max. stroke of the ram (Z) : 1200 mm,
Horizontal travel (X) : 1450 mm,
Feed range : 1 – 4000 mm/min,
Rapid feed : 4000 mm/min.,
Motor torque : 20 Nm,
Cross-rail :-
Vertical travel (W1) : 1500 mm,
Rapid feed : 400 mm/min.,
Indexing : 200 mm,
Motor : 7,5 KW,
General data :-
Power requirement : 75 KW,
Main motor (Siemens) : 55 kW,
Electrical feed-in : 380 V  10% / 50 Hz  2%,
Space requirement (W x D x H) : 4800 x 4800 x 5000 mm,
Machine weight : 38000 kg.
Accessories and attachments :-
12-fold tool changer with automatically tool clamping.
Heidenhain measuring systems.
4 clamping jaws.
2 tool holder.
3-stage main gear.
Slide travel by 5-stage ZF-reducer und pre-tensed ball screw.
Ram travel by 5-stage ZF-reducer und ball screw.
Levelling shoes.
Slide and ram bearing through TURCITE®-B plates,CNC control Siemens SINUMERIK 840 D.
 
  343
IDMA18617
MakeTitan Romania
ModelSC27CC
YOM1988/2009
ConditionReconditioned
PhotoSee Photo
Max. turning dia : 2650 mm,
Faceplate dia : 2500 mm,
Faceplate speed (stepless) : 1,5 – 112 U/min.,
Max. workpiece height : 1900 mm,
Max. workpiece weight : 15000 kg,
Vertical support :-
Swivel angle : +/- 35 °,
Max. stroke of the ram (Z) : 1200 mm,
Horizontal travel (X) : 1450 mm,
Feed range : 1 – 4000 mm/min,
Rapid feed : 4000 mm/min.,
Motor torque : 20 Nm,
Cross-rail :-
Vertical travel (W1) : 1500 mm,
Rapid feed : 400 mm/min.,
Indexing : 200 mm,
Motor : 7,5 KW,
General data :-
Power requirement : 75 KW,
Main motor (Siemens) : 55 kW,
Electrical feed-in : 380 V  10% / 50 Hz  2%,
Space requirement (W x D x H) : 5700 x 4900 x 6500 mm,
Machine weight : 38000 kg.
Accessories and attachments :-
12-fold tool changer with automatically tool clamping.
Heidenhain measuring systems.
4 clamping jaws.
2 tool holder.
3-stage main gear.
Slide travel by 5-stage ZF-reducer und pre-tensed ball screw.
Ram travel by 5-stage ZF-reducer und ball screw.
Levelling shoes.
Slide and ram bearing through TURCITE®-B plates,
CNC control Siemens SINUMERIK 840 D.
 
  344
IDMA18320
MakeRussian
Model1A532MF3
YOM
ConditionBrand New
PhotoSee Photo
Max. swing dia. : 3150 mm,
Max. job height : 1600 mm,
Max. job weight : 25000 mm,
Faceplate dia. : 2800 mm,
ATC : 10,
Vertical ram slide travels : Horizontal - 1910 mm, Vertical - 1100 mm,
Dimensions: 7190 x 6370 x 5300 mm,
Machine weight : 55000 kg.
With Siemens 802D.
 
  345
IDMA18166
MakeSchiess,German
Model
YOM1970 / 2001
ConditionVery good condition
PhotoSee Photo
Face plate diameter : 3500 mm, Swing diameter : 4000 mm, Turning height : 3000 mm, Table load : 30 t, Face plate turning speed range : 6 - 42 min, Cross rail adjustment vertical : 1000 mm, Ram head vertical travel : 1200 mm, Ram head cross travel : 3200 mm, Total power requirement : 71 kW, Dimensions of the machine : 8,0 x 6,0 m, Weight of the machine : t. AC spindle and axis drives, single ram, Interlock system, Control : SIEMENS SINUMERIK 840 C CNC Control.
 
  346
IDMA17533
MakeO-M
ModelVC6NR
YOM1998
ConditionVery good condition
PhotoSee Photo
chuck dia 2-pallets600 mm 4-jaw ,
maximum swing 787.5 mm,
maximum turning dia 618.75 mm,
max. turning height above table........ 20 1/2"
max. height from table top to turning holder mounting face 512.5 mm,
maximum weight of workpiece 660 lbs ,
ram travel horizontal (x-axis):
to the right from table center 737.5 mm (cutting stroke 425 mm)
to the left from table center 312.5 mm (cutting stroke 50 mm)
ram travel up and down (z-axis493.75 mm, table speeds 15 to 1,000 rpm
table motor 40 hp fanuc ac ,
rapid traverse rate (x-axis/z-axis) 945/630 ipm ,
feed rate 0.01 to 141 ipm ,
automatic tool changer 12 positions ,
overall floor space required 3000 x 3000 mm,
appriximate machine weight 15,400 lbs ,
equipped with:
Fanuc 21t cnc control ,
chip conveyor ,
coolant ,
automatic pallet changer (two 24" 4-jaw chucks) ,
all available tool holders and manuals
 
  347
IDMA17180
MakeChinese
ModelSVT125X10/5Q-NC
YOM
ConditionBrand New
PhotoSee Photo
Table dismeter 1000mm,
Max turning diameter 1250mm,
Max height of workpiece 1000mm,
Max weight of workpiece 5 t (speed less than 100r/min),
Max height of tool section 32mm,
Table speed step 16 step,
Table speed range 3.15~400r/min,
Feed rate step of railhead stepless,
Feed rates range of raulhead 0.1--2000mm/min,
Rapid speed of railhead :
horizontal 12000mm/min,
vertical 8000mm/min,
Max travel of crossrail 750mm,
Elevating speed of crossrail 410mm/min,
Elevating motor power for crossrail 5.5KW,
CNC system SIEMENS 802D,
No. of tool changer 1,
Tool position number 12,
Overall dimensions 5050x3000x4325mm,
Gross weight (approx.) 20t.
 
  348
IDMA17045
MakeQiqihar,China
ModelSVTM125X10-5DNC
YOM
ConditionBrand New
PhotoSee Photo
Table diameter. 1000mm,
Max. turning diameter 1250mm,
Max. high of the workpiece 1000mm,
Max. weight of the workpiece 5T,
Max. cutting force of the railhead 25KN,
Max. torque of the table 12.5KN•M,
Step of the table two stage; stepless,
Speed range of the table:
Main transmission for turning 3.15-400r/min,
CNC system SIEMENS 840D,
Main motor power 37KW (A.C),
AC servo motor torque for feed 38N.m,
Ram travel of railhead 1000mm,
Horizontal travel of railhead -20—780mm,
Rapid travel for railhead (X axis) 8000mm/min (rolling and sliding ),
Rapid travel for railhead (Z axis) 8000mm/min (rolling and sliding ),
Ram section 250x250mm,
Milling motor power S1=17kw, S2=22.5kw,
Milling head cone BT50 (7:24),
Milling speed 10—1500r/min,
Crossrail stroke 700mm,
Crossrail speed 410mm/min,
Elevating motor power of crossrail 7.5kw,
Coolant pressure 10Bar.
 
  349
IDMA16862
MakeChinese
ModelC5280-40-125
YOM2007
ConditionGood condition,under power
PhotoSee Photo
Table diameter: 6300mm,
Turning diameter: 8300mm,
Working height: 4000mm,
Ram travel: 2525mm,
Table loading capacity: 160ton,
Table speed: 0.2 - 20 rpm,
Main motor: 110kw,
Weight of the machine: 300ton,
Feed of tool holders : 0.02 - 200 mm/min,
Rapid speed of left & right tool holders : 2000 mm/min,
DC Motor, Hydraustatic Guideways,
Ballscrew for Left tool holder,
1 Vertical Ram CNC & 1 Conventional Ram
CNC : DASEN 3I-G
 
  350
IDMA16638
MakeRussian
Model1A512MF3
YOM
ConditionVery good condition
PhotoSee Photo
max work piece diameter 1250 mm,
max work piece height 1200 mm,
max work piece weight 10 tons,
table diameter 1120 mm,
table rotation speed rpm – 1-335,
main motion electric drive power 55 kW,
max cross-rail travel 820 mm,
cross-rail travel speed 400 mm/min ,
max support travel,
Horizontal 1315 mm,
Vertical 800 mm,
tool changer for 10 positions,
CNC Siemens 840 D - 3 machines.
 
  351
IDMA16522
MakeO-M
ModelTDC12N
YOM1986
Condition
PhotoSee Photo
Table dia.1231mm,max. swing 1577mm,max.turning dia.1332mm,cross travel 394mm,Z-612.5mm,spindle taper#50Cat,max. work piece wt.6 tons approx.,rapid traverse 394 IPM,table speeds 2-350 RPM,rotary tool speeds 20-1000 RPM,C-axis table positions 360 degs.,milling spindle motor 20HP,equipped with Fanuc 11T CNc control 3-axis, 2-Pallet shuttle system 1231mm,3_Jaw chucks, 8-station automatic milling tool changer through the tool coolant,C-axis table for milling & Drilling operations, Full chip &Coolant guards, withchip conveyor. 15 HP 20 HP live tooling spindle motor,40 HP 50 HP Main motor.
 
  352
IDMA15388
MakeGostas
ModelHHML800 x 40/150NC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Dia of table 7100 mm,
Max. dia of workpiece 8000 mm,
Max. height of workpiece 4000 mm,
Dimension of arbor section 40×50,
Cutting force of right carriage 65 kn,
Cutting force of left carriage 63 kn,
Max. torque of table 400 kn.m,
Vertical travel of ram 2000 mm,
Power of main motor AC125 kw,
Rang of table speed 2-63r/min,
Max. weight of workpiece 150 tons,
Guideway of table hydrostatic,
CNC SIEMENS 840D.
 
  353
IDMA14951
MakeGostas
ModelVTL1600CNC
YOMBrand New
ConditionBrand New
PhotoSee Photo
Faceplate/table dia 1250 mm,
Max turning height 1200 mm,
Automatic toolchanger for 12 tools,
Spindelpower 37/45Kw ,
2 step gearbox
Heidenhain measuringscales,
CNC Siemens
 
  354
IDMA14890
MakeChinese
ModelDVT350 x 25/32Q-NC
YOMBrand New
ConditionBrand New
PhotoSee Photo
turning dia 3500 mm, table dia 3150 mm, height of workpiece 2500 mm, weight of workpiece 32 tons , travel of head horizontal -20-1840 mm, cutting force of right head 35 kN , cutting force of left head 28 kN , max torque of table 80 kN.m ,vertical travel of ram 1250 mm, ram section 240 m2 , motor power of main transmission DC75 kW , speed range of table 0.63-63 r/min , rapid travel of head 8000mm/min , guideway pair of table hydrostatic , torque of feed motor 38 N.m , CNC System Siemens/Fanuc. 1. This series machine is suitable for finely and roughly turning cylinder and inner hole, inner and outer taper, surfacing, grooving of the ferrous, nonferrous metal and some kinds of non-metal materials with carbide alloy and porcelain tools.
2. Feed is driven by AC servomotor, transmitted by ball screw. The universal type has such construction that can be rebuilt into CNC type.
3. The main drive is provided by AC motor via (16-step spindle speed-change), realizing table speeds. Also DC motor can be provided on special request. Main transmission adopts two-step mechanical speed change governor.
4. The table is thermal symmetric construction. The table spindle is centered by high-precision double-row short roller bearing whose radial clearance can be adjusted. Constant flow hydrostatic guide way is applied in axial direction, the table has features of higher swivel precision, larger loadability and smaller thermal deformation.
5. Horizontal guide way of rail head is hydrostatic unloading guide way, guide way of ram vertical movement is sliding guide way.
6. Digital display device and grinding head of electric spindle can be provided on customer’s request.
 
  355
IDMA14888
MakeChinese
ModelDVT315 X 25/32Q
YOMBrand New
ConditionBrand New
PhotoSee Photo
turning dia 3150 mm, table dia 2830 mm, height of workpiece 2500 mm, weight of workpiece 32 tons , travel of head horizontal -20-1840 mm, cutting force of right head 40 kN , cutting force of left head 35 kN , max torque of table 80 kN.m , vertical travel of ram 1250 mm,ram section 240 m2 , motor power of main transmission DC 75 kW , speed range of table 0.63-63 r/min , rapid travel of head 8000mm/min , guideway pair of table hydrostatic , torque of feed motor 38 N.m , CNC System Siemens/Fanuc.1. This series machine is suitable for finely and roughly turning cylinder and inner hole, inner and outer taper, surfacing, grooving of the ferrous, nonferrous metal and some kinds of non-metal materials with carbide alloy and porcelain tools.
2. Feed is driven by AC servomotor, transmitted by ball screw. The universal type has such construction that can be rebuilt into CNC type.
3. The main drive is provided by AC motor via (16-step spindle speed-change), realizing table speeds. Also DC motor can be provided on special request. Main transmission adopts two-step mechanical speed change governor.
4. The table is thermal symmetric construction. The table spindle is centered by high-precision double-row short roller bearing whose radial clearance can be adjusted. Constant flow hydrostatic guide way is applied in axial direction, the table has features of higher swivel precision, larger loadability and smaller thermal deformation.
5. Horizontal guide way of rail head is hydrostatic unloading guide way, guide way of ram vertical movement is sliding guide way.
6. Digital display device and grinding head of electric spindle can be provided on customer’s request.
 
  356
IDMA14887
MakeChinese
ModelDVT315 x 20/32Q
YOMBrand New
ConditionBrand New
PhotoSee Photo
turning dia 3150 mm, table dia 2500 mm, height of workpiece 2000 mm, weight of workpiece 32 tons , travel of head horizontal -20-1840 mm, cutting force of right head 35 kN , cutting force of left head 28 kN , max torque of table 80 kN.m ,vertical travel of ram 1250 mm, ram section 220 m2 , motor power of main transmission AC55 kW , speed range of table 1.6-50 r/min , rapid travel of head 4000mm/min , guideway pair of table hydrostatic , torque of feed motor 38 N.m , CNC System Siemens/Fanuc.1. This series machine is suitable for finely and roughly turning cylinder and inner hole, inner and outer taper, surfacing, grooving of the ferrous, nonferrous metal and some kinds of non-metal materials with carbide alloy and porcelain tools.
2. Feed is driven by AC servomotor, transmitted by ball screw. The universal type has such construction that can be rebuilt into CNC type.
3. The main drive is provided by AC motor via (16-step spindle speed-change), realizing table speeds. Also DC motor can be provided on special request. Main transmission adopts two-step mechanical speed change governor.
4. The table is thermal symmetric construction. The table spindle is centered by high-precision double-row short roller bearing whose radial clearance can be adjusted. Constant flow hydrostatic guide way is applied in axial direction, the table has features of higher swivel precision, larger loadability and smaller thermal deformation.
5. Horizontal guide way of rail head is hydrostatic unloading guide way, guide way of ram vertical movement is sliding guide way.
6. Digital display device and grinding head of electric spindle can be provided on customer’s request.
 
  357
IDMA14759
MakeSchiess Sedin
ModelVMG32
YOM
ConditionBrand New
PhotoSee Photo
Maximum diameter of workpiece accomodated 3200 mm,
Width of carriageway portal 3000 mm,
Turning height between faceplate edge top and
tool holder WSD-B1-M1114 with tool sweep 60 mm 2500 mm,
Crossrail vertical traverse along column without steps 1900 mm,
Speed of crossrail travel 4000 mm/min,
* Portal travel along the base guideeways, forward 1500
backward 1600
* Portal speeds by minute feed 0,01-1000 mm/min,
* Rapid portal speed 6000 mm/min
Design features:
- Pig-iron right and left racks, the steel welded crossrail, forming a design with thermally symmetric configuration,
- Fixings position of a crossrail on racks tightening springs, easing of fixings hydraulic,
- The mechanism of moving of a crossrail and portal from servomotors by means of a ball feed screw, with electronic alignment from CNC (gantry-axis),
- A ball feed screw of moving a sled of a support and a ram with a drive from powerful servomotors,
- Steel telescopic protection directing crossrail,
* Parameters only for performance of the lathe model VMG 32
TABLE BASE, FACEPLATE, THE MAIN DRIVE
Diameter of a faceplate 2500 mm,
The greatest weight of a work piece 25 tons ,
Frequency of rotation of a faceplate
- At turning processing 0.5-180,
- At circular milling and positioning 0,005 … 5,
Accuracy of positioning of a faceplate (unilateral positioning) +/-6,5 angular seconds
The greatest twisting moment on a faceplate in a mode of long work to kNm 63,
Capacity of the engine of the main drive 110 (55х2) kW ,
The greatest admitted effort of cutting ft turning processing 50 kN,
Design features:
- A steel welded design of the basis with thermally symmetric configuration and system of emergency unloading of the axial hydrostatic bearing;
- A cast pig-iron faceplate with 4 built cams of a clip of preparation and grooves for installation of elements of fastening of preparation;
- The bearing of a faceplate hydrostatic, works by a principle "pump - pocket";
- 2 reducers of the main drive with transfer of the twisting moment from the electric motor on a vertical shaft the chain transfer, built - in the table base ;
- 2 built-in vertical shaft with cogwheels of transfer of rotation of the main drive on a cogwheel of a faceplate;
- 2 electric motors of the main drive (controlled by digital drives of firm Siemens), working in a mode "Master and Slave" for maintenance in a turning cycle of full capacity in all a range of number of revolutions without switching transfers, in a milling mode both engines are adjusted by an electricity for maintenance without a shameful milling drive of an axis "C".
VERTICAL COMBINED SUPPORT (turning, drilling - milling)
Horizontal course of a support on axes "X" 3500 mm,
Course of a ram on an axis "Z" 1400 mm,
Cross section of a ram 250х210 mm,
Speeds of submission (are adjusted without steps):
Minute 0,1-2 000 , mm / mines,
Turnaround 0,01-50 mm / revolution,
The accelerated course of a support and ram, mm/min 10 000
Capacity of the engine of a drilling - milling drive, kw 28
At a reduction of a drive 1:1 :
- Frequency of rotation of a spindle of a drilling - milling drive, rpm 16-1 600
- The maximal twisting moment on a spindle of the tool, Nm 1 020
Design features:
- The tetrahedral, steel tempered ram of a support;
- Hydrostatic directing on two axes, system "pump - pocket".
- A drive of rotation of the drilling - milling tool from a shaft (taking place inside a ram).
- The shaft incorporates to the electric motor of firm SIEMENS a gear belt drive.
THE DEVICE OF CHANGEOVER OF TOOL HEADS AND THE INSTRUMENT
- Disk magazines, drum type, are fixed on backs of a cross-rail;
- A six-positional disk magazine for tool heads, completely automatic changeover of tool heads on the ram;
- A store disk with 28 nests for turning and a drilling-milling instrument with cone SK ISO 50;
- A magazine of replaceable heads on 6 positions
- The maximum weight of one instrument with cone ISO-50, kg 30
- The maximum diameter of the milling cutter, mm 200
- Completely automatic system of changeover of the instrument in a tool head;
- A protective fence with electrical inspected doors of loading of the magazine.
The REPLACEABLE ADAPTER FOR TURNING TOOLS, type B1-SD50
- Connection with a ram due to face gearing;
- A jack for fastening holders of the turning tool with cone ISO 50;
- An automatic split terminal of tools with the help of a package of springs; easing of a clip hydraulic;
- The minimal diameter of passage of the adapter in details, mm 360
The REPLACEABLE VERTICAL DRILLING - BORING HEAD, type B1-SB1
- Connection with a ram due to face gearing, a working spindle with cone ISO 50;
- An automatic split terminal of tools with the help of a package of springs; easing of a clip hydraulic;
- Frequency of rotation of a working spindle, rpm 5-1600
- The maximal twisting moment, Nm. 1 000
- The minimal diameter of passage of the head in details, mm 360
- The start of the tool which is not influencing on max. height of a work piece, mm 120
The REPLACEABLE ANGULAR DRILLING-BORING HEAD (90 degrees), type B1-WB1
- Connection with a ram due to face gearing, a working spindle with cone ISO 50;
- An automatic split terminal of tools with the help of a package of springs; easing of a clip hydraulic;
- Frequency of rotation of a working spindle, rpm 5-1600
- The maximal twisting moment, Nm. 1 000
- Loss of height of a work piece, mm 200
- Reduction of the maximal diameter of a work piece, mm 200
- The minimal diameter of passage of the head in details, mm 450
THE COMPLETE SET OF TOOL HOLDERS
The holder of a cutter on effort of cutting of 50 kN - 1 piece.
The standard right holder of a cutter - 5 piece.
The standard left holder of a cutter - 5 piece.
The boring bar - 2 piece.
The milling, drilling conical bar - 2 piece.
HYDRAULICS AND LUBRICANT
- The pump unit, switching and supervising instrumentation on hydrostation and on the machine tool of manufacture of countries EC;
- The cooling aggregate of a hydraulic system with the control of temperature from PLC;
- A system of pulse lubrication for a cross - rail of firm VOGEL.
THE PNEUMATIC SYSTEM OF A VENTILATION OF THE TOOL and places of basing of holders of cutters
- Air intake on the machine tool and a directional ventilation of heads and holders of cutters at change.
PRORATES for the installation and adjustments of the machine tool



ELECTRIC EQUIPMENT
- It is executed under standards VDE 0113 or EN 60204;
- Firing - commuting instrumentation of european manufacture, an electrocase and the control panel of firm RITTAL.
MEASURING SYSTEMS of firm HEIDENHAIN
- Linear measuring systems for axes of a portal, a cross - rail and a support;
- Circular measuring sensors of revolutions of a faceplate and a drilling - milling spindle.

CONTROL SYSTEM SINUMERIK 840 D, manufactures of firm SIEMENS.
The multiprocessing system of numerical program management consisting from:
Panels of service of the device of CNC with 15 ” color TFT the graphic display for indication.

MAIN SPINDLE MOTION AND "C" AXIS
- Frequent converters SIMODRIVE 611 D, manufactures of SIEMENS corporation, as a unit with switching among chokes, packed beds;
- Two asynchronous, 3 phase, the commutatorless motor on 55 kw, with the built-in position pickup and a package of cables for the position pickup.
TRACTION MECHANISM OF THE DRILLING-AND-MILLING SPINDLE
- The frequent converter, type SIMODRIVE 611 D as a unit with starting-defense instrumentation;
- The induction motor, manufactures of SIEMENS corporation, 3 phase, commutatorless, with the built-in position pickup and a brake, a package of cables for the position pickup.
TRACTION MECHANISMS OF FEEDINGES FOR AXES "X", "Z", "W"
- Frequent converters, type SIMODRIVE 611 D, as a unit with starting-defense instrumentation;
- servomotors, manufactures of SIEMENS corporation, 3 phase, commutatorless, with the built-in position pickup and a brake, a package of cables for position pickups.
TRACTION MECHANISM OF A KIT STORE
- The frequent converter, type SIMODRIVE 611 D, as a unit with the instrumentation;
- The servomotor manufactures of SIEMENS corporation, 3 phase, commutatorless, with the built-in position pickup and a brake, a package of cables for the position pickup.

A. THE PRICE OF BASE MODIFICATION OF MACHINE VM 32, VM 32 including:
Portal, foundation, face plate, the main drive, vertical support with the bore-milling device, the device of changeover of the instrument and tool heads, the turning adapter, a vertical drill head, the angle drilling-and-milling head, a package of tool holders, hydraulics, lubrication and an electrical equipment:
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 12-14 months from the contract signing date.
B. Additions to base modification:
В1. Total (cabinet) guard, coolant system, chip conveyer 58 600 €;
B2. Workpiece measuring probe system Renishaw 16 800 €;
B3. Tool geometry measurement equipment Trabant bay f. Messma-Kelch 21 900 €;
B4. Сhageeable grinding by special grindin head 26 400 €;
B5. Сhageeable fixed milling head (90º) 36 500 €;
B6. Сhageeable combination swivel milling head (0-90º) 54 800 €;

 
  358
IDMA14758
MakeSchiess Sedin
ModelVM32
YOM
ConditionBrand New
PhotoSee Photo
Maximum diameter of workpiece accomodated 3200 mm,
Width of carriageway portal 3000 mm,
Turning height between faceplate edge top and
tool holder WSD-B1-M1114 with tool sweep 60 mm 2500 mm,
Crossrail vertical traverse along column without steps 1900 mm,
Speed of crossrail travel 4000 mm/min,
* Portal travel along the base guideeways, forward 1500
backward 1600
* Portal speeds by minute feed 0,01-1000 mm/min,
* Rapid portal speed 6000 mm/min
Design features:
- Pig-iron right and left racks, the steel welded crossrail, forming a design with thermally symmetric configuration,
- Fixings position of a crossrail on racks tightening springs, easing of fixings hydraulic,
- The mechanism of moving of a crossrail and portal from servomotors by means of a ball feed screw, with electronic alignment from CNC (gantry-axis),
- A ball feed screw of moving a sled of a support and a ram with a drive from powerful servomotors,
- Steel telescopic protection directing crossrail,
* Parameters only for performance of the lathe model VMG 32
TABLE BASE, FACEPLATE, THE MAIN DRIVE
Diameter of a faceplate 2500 mm,
The greatest weight of a work piece 25 tons ,
Frequency of rotation of a faceplate
- At turning processing 0.5-180,
- At circular milling and positioning 0,005 … 5,
Accuracy of positioning of a faceplate (unilateral positioning) +/-6,5 angular seconds
The greatest twisting moment on a faceplate in a mode of long work to kNm 63,
Capacity of the engine of the main drive 110 (55х2) kW ,
The greatest admitted effort of cutting ft turning processing 50 kN,
Design features:
- A steel welded design of the basis with thermally symmetric configuration and system of emergency unloading of the axial hydrostatic bearing;
- A cast pig-iron faceplate with 4 built cams of a clip of preparation and grooves for installation of elements of fastening of preparation;
- The bearing of a faceplate hydrostatic, works by a principle "pump - pocket";
- 2 reducers of the main drive with transfer of the twisting moment from the electric motor on a vertical shaft the chain transfer, built - in the table base ;
- 2 built-in vertical shaft with cogwheels of transfer of rotation of the main drive on a cogwheel of a faceplate;
- 2 electric motors of the main drive (controlled by digital drives of firm Siemens), working in a mode "Master and Slave" for maintenance in a turning cycle of full capacity in all a range of number of revolutions without switching transfers, in a milling mode both engines are adjusted by an electricity for maintenance without a shameful milling drive of an axis "C".
VERTICAL COMBINED SUPPORT (turning, drilling - milling)
Horizontal course of a support on axes "X" 3500 mm,
Course of a ram on an axis "Z" 1400 mm,
Cross section of a ram 250х210 mm,
Speeds of submission (are adjusted without steps):
Minute 0,1-2 000 , mm / mines,
Turnaround 0,01-50 mm / revolution,
The accelerated course of a support and ram, mm/min 10 000
Capacity of the engine of a drilling - milling drive, kw 28
At a reduction of a drive 1:1 :
- Frequency of rotation of a spindle of a drilling - milling drive, rpm 16-1 600
- The maximal twisting moment on a spindle of the tool, Nm 1 020
Design features:
- The tetrahedral, steel tempered ram of a support;
- Hydrostatic directing on two axes, system "pump - pocket".
- A drive of rotation of the drilling - milling tool from a shaft (taking place inside a ram).
- The shaft incorporates to the electric motor of firm SIEMENS a gear belt drive.
THE DEVICE OF CHANGEOVER OF TOOL HEADS AND THE INSTRUMENT
- Disk magazines, drum type, are fixed on backs of a cross-rail;
- A six-positional disk magazine for tool heads, completely automatic changeover of tool heads on the ram;
- A store disk with 28 nests for turning and a drilling-milling instrument with cone SK ISO 50;
- A magazine of replaceable heads on 6 positions
- The maximum weight of one instrument with cone ISO-50, kg 30
- The maximum diameter of the milling cutter, mm 200
- Completely automatic system of changeover of the instrument in a tool head;
- A protective fence with electrical inspected doors of loading of the magazine.
The REPLACEABLE ADAPTER FOR TURNING TOOLS, type B1-SD50
- Connection with a ram due to face gearing;
- A jack for fastening holders of the turning tool with cone ISO 50;
- An automatic split terminal of tools with the help of a package of springs; easing of a clip hydraulic;
- The minimal diameter of passage of the adapter in details, mm 360
The REPLACEABLE VERTICAL DRILLING - BORING HEAD, type B1-SB1
- Connection with a ram due to face gearing, a working spindle with cone ISO 50;
- An automatic split terminal of tools with the help of a package of springs; easing of a clip hydraulic;
- Frequency of rotation of a working spindle, rpm 5-1600
- The maximal twisting moment, Nm. 1 000
- The minimal diameter of passage of the head in details, mm 360
- The start of the tool which is not influencing on max. height of a work piece, mm 120
The REPLACEABLE ANGULAR DRILLING-BORING HEAD (90 degrees), type B1-WB1
- Connection with a ram due to face gearing, a working spindle with cone ISO 50;
- An automatic split terminal of tools with the help of a package of springs; easing of a clip hydraulic;
- Frequency of rotation of a working spindle, rpm 5-1600
- The maximal twisting moment, Nm. 1 000
- Loss of height of a work piece, mm 200
- Reduction of the maximal diameter of a work piece, mm 200
- The minimal diameter of passage of the head in details, mm 450
THE COMPLETE SET OF TOOL HOLDERS
The holder of a cutter on effort of cutting of 50 kN - 1 piece.
The standard right holder of a cutter - 5 piece.
The standard left holder of a cutter - 5 piece.
The boring bar - 2 piece.
The milling, drilling conical bar - 2 piece.
HYDRAULICS AND LUBRICANT
- The pump unit, switching and supervising instrumentation on hydrostation and on the machine tool of manufacture of countries EC;
- The cooling aggregate of a hydraulic system with the control of temperature from PLC;
- A system of pulse lubrication for a cross - rail of firm VOGEL.
THE PNEUMATIC SYSTEM OF A VENTILATION OF THE TOOL and places of basing of holders of cutters
- Air intake on the machine tool and a directional ventilation of heads and holders of cutters at change.
PRORATES for the installation and adjustments of the machine tool



ELECTRIC EQUIPMENT
- It is executed under standards VDE 0113 or EN 60204;
- Firing - commuting instrumentation of european manufacture, an electrocase and the control panel of firm RITTAL.
MEASURING SYSTEMS of firm HEIDENHAIN
- Linear measuring systems for axes of a portal, a cross - rail and a support;
- Circular measuring sensors of revolutions of a faceplate and a drilling - milling spindle.

CONTROL SYSTEM SINUMERIK 840 D, manufactures of firm SIEMENS.
The multiprocessing system of numerical program management consisting from:
Panels of service of the device of CNC with 15 ” color TFT the graphic display for indication.

MAIN SPINDLE MOTION AND "C" AXIS
- Frequent converters SIMODRIVE 611 D, manufactures of SIEMENS corporation, as a unit with switching among chokes, packed beds;
- Two asynchronous, 3 phase, the commutatorless motor on 55 kw, with the built-in position pickup and a package of cables for the position pickup.
TRACTION MECHANISM OF THE DRILLING-AND-MILLING SPINDLE
- The frequent converter, type SIMODRIVE 611 D as a unit with starting-defense instrumentation;
- The induction motor, manufactures of SIEMENS corporation, 3 phase, commutatorless, with the built-in position pickup and a brake, a package of cables for the position pickup.
TRACTION MECHANISMS OF FEEDINGES FOR AXES "X", "Z", "W"
- Frequent converters, type SIMODRIVE 611 D, as a unit with starting-defense instrumentation;
- servomotors, manufactures of SIEMENS corporation, 3 phase, commutatorless, with the built-in position pickup and a brake, a package of cables for position pickups.
TRACTION MECHANISM OF A KIT STORE
- The frequent converter, type SIMODRIVE 611 D, as a unit with the instrumentation;
- The servomotor manufactures of SIEMENS corporation, 3 phase, commutatorless, with the built-in position pickup and a brake, a package of cables for the position pickup.

A. THE PRICE OF BASE MODIFICATION OF MACHINE VM 32, VM 32 including:
Portal, foundation, face plate, the main drive, vertical support with the bore-milling device, the device of changeover of the instrument and tool heads, the turning adapter, a vertical drill head, the angle drilling-and-milling head, a package of tool holders, hydraulics, lubrication and an electrical equipment:
EUR 1,596,000 EXW
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 12-14 months from the contract signing date.
B. Additions to base modification:
В1. Total (cabinet) guard, coolant system, chip conveyer 58 600 €;
B2. Workpiece measuring probe system Renishaw 16 800 €;
B3. Tool geometry measurement equipment Trabant bay f. Messma-Kelch 21 900 €;
B4. Сhageeable grinding by special grindin head 26 400 €;
B5. Сhageeable fixed milling head (90º) 36 500 €;
B6. Сhageeable combination swivel milling head (0-90º) 54 800 €;

 
  359
IDMA14757
MakeSchiess Sedin
Model1A532LMF4
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece diameter 3150 mm,
Turning height 1600 (2500 mm),
BASE, FACEPLATE, MAIN DRIVE
Faceplate dia 2800 mm, Max. workpiece weight 25 tons ,
Faceplate rotational speeds in turning mode, r.p.m 0.22-110,
Max. torque on faceplate in turning mode kNm 100,
Main gear shifts quantity 3,
Main spindle motor power kW 55,
Round axis accuracy angle sec. +/-6.5,
Max. torque on faceplate in turning mode kNm 80,
Main gear shifts quantity 3,
Main spindle motor power 55 kW,
Possibility of disengaging round axis drive exists,
CROSSRAIL
Crossrail vertical traverse along column with 240mm steps 1200 mm,
Speed of crossrail travel 400 mm/min,
RIGHT VERTICAL SUPPORT (TURNING)
Horizontal carriage traverse 1960 mm,
Ram stroke 1250 mm,
Ram cutting section 210 x 210 mm,
Max. cutting force by 300 mm ram stroke (including toolholder) 3 tons,
Min. through diameter of toolholder 300 mm,
Rapid traverse speed 6000 mm/min,
Support speeds by minute feed 0,01-2000 mm/min,
Support speeds by rotational feed 0,1-50 mm/rev,
Magazine discs for support with 10 positions for turning toolholders
Toolholder for cutting tool 10,

LEFT VERTICAL SUPPORT (MILLING AND BORING)
Horizontal carriage traverse, mm 1960 mm,
Ram stroke 800 mm,
Ram cutting section 210 x 210 mm,
Rapid traverse speed 6000 mm/min ,
Support speeds by minute feed 0,01-2000 mm/min,
Support speeds by rotational feed 0,1-50 mm/rev,
Milling spindle rotational speeds 5-1 600 RPM ,
Rated spindle power 17 kW ,
Max. torque 560 kNm,
Min. through diameter of toolholder 300 mm,
Automatic tool change with cone tool in milling spindle hole exists
Possibility of using of angle milling head exists
Magazine discs for support with 12 positions for milling and boring toolholders
Toolholder for cutting tool 2,
Vertical lathe with electrical equipment of firma Siemens: CNC Sinumerik 840D, digital AC drives Simodrive 611D, electrical cabinet and operational panel by firma Rittal, linear and rotary encoders of firma Heidenhain, machine wiring and cables by firma Lappkabel, machine electrical enclosures by firma Rittal.
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 12-13 months from the contract signing date.
ADDITIONALLY THE MACHINE MAY BE EQUIPPED BY THE FOLLOWING EXTRA OPTIONS:
- total guard of machine working zone including coolant device 22 500 €;
- chip conveyer 9 000 €;
- pneumatic system for tools and tool changer locations air blow 3 600 €;
- workpiece measurement probe system Renishaw (for one support) 16 800 €;
- grinding by special grinding head 24 800 €;
- Increasing of max. machining height up to 2 000 mm 10 500 €;
- Increasing of max. machining height up to 2 500 mm 14 500 €.

 
  360
IDMA14756
MakeSchiess Sedin
Model1A525MF4
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece diameter 2500 mm,
Turning height 1600 (2000 mm),
BASE, FACEPLATE, MAIN DRIVE
Faceplate dia 2240 mm, Max. workpiece weight 25 tons ,
Faceplate rotational speeds in turning mode, r.p.m 0.27-138,
Max. torque on faceplate in turning mode kNm 80,
Main gear shifts quantity 3,
Main spindle motor power kW 55,
Round axis accuracy angle sec. +/-6.5,
Max. torque on faceplate in turning mode kNm 80,
Main gear shifts quantity 3,
Main spindle motor power 55 kW,
Possibility of disengaging round axis drive exists,
CROSSRAIL
Crossrail vertical traverse along column with 240mm steps 1200 mm,
Speed of crossrail travel 400 mm/min,
RIGHT VERTICAL SUPPORT (TURNING)
Horizontal carriage traverse 1720 mm,
Ram stroke 1250 mm,
Ram cutting section 210 x 210 mm,
Max. cutting force by 300 mm ram stroke (including toolholder) 3 tons,
Min. through diameter of toolholder 300 mm,
Rapid traverse speed 6000 mm/min,
Support speeds by minute feed 0,01-2000 mm/min,
Support speeds by rotational feed 0,1-50 mm/rev,
Magazine discs for support with 10 positions for turning toolholders
Toolholder for cutting tool 10,

LEFT VERTICAL SUPPORT (MILLING AND BORING)
Horizontal carriage traverse, mm 1720 mm,
Ram stroke 800 mm,
Ram cutting section 210 x 210 mm,
Rapid traverse speed 6000 mm/min ,
Support speeds by minute feed 0,01-2000 mm/min,
Support speeds by rotational feed 0,1-50 mm/rev,
Milling spindle rotational speeds 5-1 600 RPM ,
Rated spindle power 17 kW ,
Max. torque 560 kNm,
Min. through diameter of toolholder 300 mm,
Automatic tool change with cone tool in milling spindle hole exists
Possibility of using of angle milling head exists
Magazine discs for support with 12 positions for milling and boring toolholders
Toolholder for cutting tool 2,
Vertical lathe with electrical equipment of firma Siemens: CNC Sinumerik 840D, digital AC drives Simodrive 611D, electrical cabinet and operational panel by firma Rittal, linear and rotary encoders of firma Heidenhain, machine wiring and cables by firma Lappkabel, machine electrical enclosures by firma Rittal.
Eur 777,000 EXW
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 12-13 months from the contract signing date.
ADDITIONALLY THE MACHINE MAY BE EQUIPPED BY THE FOLLOWING EXTRA OPTIONS:
- total guard of machine working zone including coolant device 22 500 €;
- chip conveyer 9 000 €;
- pneumatic system for tools and tool changer locations air blow 3 600 €;
- workpiece measurement probe system Renishaw (for one support) 16 800 €;
- grinding by special grinding head 24 800 €;
- Increasing of max. machining height up to 2 000 mm 10 500 €;
- Increasing of max. machining height up to 2 500 mm 14 500 €.

 
  361
IDMA14752
MakeSchiess Sedin
Model1A525MF3
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece diameter 2500 mm,
Turning height 1600 (2000 mm),
BASE, FACEPLATE, MAIN DRIVE
Faceplate dia 2240 mm,
Max. workpiece weight 25 tons ,
Faceplate rotational speeds in turning mode, r.p.m 0.27-138,
Max. torque on faceplate in turning mode, kNm 80,
Main gear shifts quantity 3,
Main spindle motor power 55 kW ,
CROSSRAIL
Crossrail vertical traverse along column with 240 mm steps, mm 1200 mm,
Speed of crossrail travel, mm/min 400 mm/min ,
RIGHT and LEFT VERTICAL SUPPORTS
Horizontal carriage traverse, mm 1720 mm,
Ram stroke 1250 mm,
Ram cutting section, mm 210 x 210 mm,
Min. through diameter of toolholder 300 mm,
Rapid traverse speed 6000 mm/min,
Support speeds by minute feed, 0,01-2 000 mm/min,
Support speeds by rotational feed, 0,1-50 mm/rev,
Magazine discs for every support with 10 positions for turning toolholders

1. Vertical lathe with electrical equipment of СNC 8070, digital AC drives, linear and rotary encoders of firma FAGOR. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma RITTAL - EUR 672,000.

2. Vertical lathe with electrical equipment of firma Siemens: CNC Sinumerik 840D, digital AC drives Simodrive 611D, electrical cabinet and operational panel by firma Rittal, linear and rotary encoders of firma Heidenhain, machine wiring and cables by firma Lappkabel, machine electrical enclosures by firma Rittal - EUR 693,000 EXW
 
  362
IDMA14751
MakeSchiess Sedin
Model1A516MF4
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece diameter 1600 mm,
Turning height 1250 mm,

BASE, FACEPLATE, MAIN DRIVE
Faceplate diameter 1400 mm,
Max. workpiece weight 15 tons ,
Faceplate rotational speeds in turning mode, r.p.m 1-280 ,
Max. torque on faceplate in turning mode kNm 25 ,
Main gear shifts quantity 3
Main spindle motor power kW 55,
Table round axis feeds in milling mode r.p.m 0,01-1,
Max. faceplate positioning speed in turning moder.p.m 2,5,

Round axis accuracy, angle sec. +/-6.5,
Max. torque on faceplate in turning mode kNm 25 ,
Possibility of disengaging round axis drive exists
CROSSRAIL
Crossrail vertical traverse along column with 200 mm steps 1000 mm,
Speed of crossrail travel 400 mm/min,
RIGHT VERTICAL SUPPORT
Horizontal carriage traverse 1315 mm,
Ram stroke 800 mm,
Ram cutting section 210x210 mm,
Max. cutting force by 300 mm ram stroke (including toolholder), kN 25
Min. through diameter of toolholder 300 mm,
Milling spindle rotational speeds r.p.m 5-1 600,
Rated spindle power kW 17,
Max. torque kNm 560,
Automatic tool change with cone tool in milling spindle hole exists
Possibility of using of angle milling head exists
Magazine discs for support with 12 positions for milling and boring toolholders
Turning toolholder 6
Toolholder for cutting tool 2
Vertical lathe with electrical equipment of NC SINUMERIK 840D, digital AC drives SIMODRIVE 611D of firma SIEMENS. Linear and rotary encoders of firma Heidenhain. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma Wieland
EUR 449,400 EXW
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 9-10 months from the contract signing date.

ADDITIONALLY THE MACHINE MAY BE EQUIPPED BY THE FOLLOWING EXTRA OPTIONS:
- total guard of machine working zone including coolant device and chip conveyer - 24 800 €;
- pneumatic system for tools and tool changer locations air blow - 1 600 €;
- workpiece measurement probe system Renishaw - 16 800 €;
- tool geometry measurement equipment - 19 600 €;
- grinding removable head on the lathe - 24 600 €;
- additional three cam's self-centering chuck with hydraulic drive - 58 000 €.
 
  363
IDMA14750
MakeSchiess Sedin
Model1A512MF4
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece diameter 1250 mm,
Turning height 1250 mm,

BASE, FACEPLATE, MAIN DRIVE
Faceplate diameter 1120 mm,
Max. workpiece weight10 tons ,
Faceplate rotational speeds in turning mode, r.p.m 1-335 ,
Max. torque on faceplate in turning mode kNm 25 ,
Main gear shifts quantity 3
Main spindle motor power kW 55,
Table round axis feeds in milling mode r.p.m 0,01-1,
Max. faceplate positioning speed in turning moder.p.m 2,5,

Round axis accuracy, angle sec. +/-6.5,
Max. torque on faceplate in turning mode kNm 25 ,
Possibility of disengaging round axis drive exists
CROSSRAIL
Crossrail vertical traverse along column with 200 mm steps 1000 mm,
Speed of crossrail travel 400 mm/min,
RIGHT VERTICAL SUPPORT
Horizontal carriage traverse 970 mm,
Ram stroke 800 mm,
Ram cutting section 210x210 mm,
Max. cutting force by 300 mm ram stroke (including toolholder), kN 25
Min. through diameter of toolholder 300 mm,
Milling spindle rotational speeds r.p.m 5-1 600,
Rated spindle power kW 17,
Max. torque kNm 560,
Automatic tool change with cone tool in milling spindle hole exists
Possibility of using of angle milling head exists
Magazine discs for support with 12 positions for milling and boring toolholders
Turning toolholder 6
Toolholder for cutting tool 2
Vertical lathe with electrical equipment of NC SINUMERIK 840D, digital AC drives SIMODRIVE 611D of firma SIEMENS. Linear and rotary encoders of firma Heidenhain. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma Wieland
EUR 426,300 EXW
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 9-10 months from the contract signing date.

ADDITIONALLY THE MACHINE MAY BE EQUIPPED BY THE FOLLOWING EXTRA OPTIONS:
- total guard of machine working zone including coolant device and chip conveyer - 24 800 €;
- pneumatic system for tools and tool changer locations air blow - 1 600 €;
- workpiece measurement probe system Renishaw - 16 800 €;
- tool geometry measurement equipment - 19 600 €;
- grinding removable head on the lathe - 24 600 €;
- additional three cam's self-centering chuck with hydraulic drive - 58 000 €.
 
  364
IDMA14749
MakeSchiess Sedin
Model1A516MF3
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece diameter 1600 mm,
Turning height 1250 mm,
BASE, FACEPLATE, MAIN DRIVE
Faceplate diameter 1400 mm,
Max. workpiece weight 15 tons ,
Faceplate rotational speeds in turning mode, r.p.m 1-280,
Max. torque on faceplate in turning mode, kNm 30,
Main gear shifts quantity 3,
Main spindle motor power 55 kW ,
CROSSRAIL
Crossrail vertical traverse along column with 200 mm steps 1000 mm,
Speed of crossrail travel 400 mm/min,
RIGHT VERTICAL SUPPORT
Horizontal carriage traverse 1315 mm,
Ram stroke 800 mm,
Ram cutting section 210x210 mm,
Max. cutting force by 300 mm ram stroke (including toolholder) 5 tons,
Min. through diameter of toolholder 300 mm,
Magazine discs with 10 positions for turning toolholders
- toolholder for cutting tool 10
Сonstruction of a mechanical part of the lathe:
- steel welded column, joint with a table via bolts;
- molten cast-iron table, a built-in spindle block with a prestressed cross-roller bearing, a faceplate with four cams of cramp of the workpiece;
- faceplate with four jaws;
- molten cast-iron crossrail with the mechanism of vertically displacing and fixing on directing of column;
- main drive with adjustable electric motor;
- feed drives for both support axis with high torque servomotors via ball-screw gear;
- automatic impulse lubrication of firma Vogel for the support guideways and the ball-screw gears;
- hydraulic station with apparatus from European manufacturers;
The following modifications of electrical equipment are available:
1. Vertical lathe with electrical equipment of NC SINUMERIK 802Dsl, digital AC drives SINAMICS S120 of firma SIEMENS. Linear and rotary encoders of firma Heidenhain. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma RITTAL
EUR 336,000 EXW.
2. Vertical lathe with electrical equipment of СNC 8070, digital AC drives, linear and rotary encoders of firma FAGOR. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma RITTAL
EUR 344,400 EXW
3. Vertical lathe with electrical equipment of NC SINUMERIK 840D, digital AC drives SIMODRIVE 611D of firma SIEMENS. Linear and rotary encoders of firma Heidenhain. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma RITTAL
EUR 363,300 EXW
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 7-8 months from the contract signing date.

 
  365
IDMA14748
MakeSchiess Sedin
Model1A512MF3
YOM
ConditionBrand New
PhotoSee Photo
Max. workpiece diameter 1250 mm,
Turning height 1250 mm,
BASE, FACEPLATE, MAIN DRIVE
Faceplate diameter 1120 mm,
Max. workpiece weight 10 tons ,
Faceplate rotational speeds in turning mode, r.p.m 1-335,
Max. torque on faceplate in turning mode, kNm 25,
Main gear shifts quantity 3,
Main spindle motor power 55 kW ,
CROSSRAIL
Crossrail vertical traverse along column with 200 mm steps 1000 mm,
Speed of crossrail travel 400 mm/min,
RIGHT VERTICAL SUPPORT
Horizontal carriage traverse 970 mm,
Ram stroke 800 mm,
Ram cutting section 210x210 mm,
Max. cutting force by 300 mm ram stroke (including toolholder) 5 tons,
Min. through diameter of toolholder 300 mm,
Magazine discs with 10 positions for turning toolholders
- toolholder for cutting tool 10
Сonstruction of a mechanical part of the lathe:
- steel welded column, joint with a table via bolts;
- molten cast-iron table, a built-in spindle block with a prestressed cross-roller bearing, a faceplate with four cams of cramp of the workpiece;
- faceplate with four jaws;
- molten cast-iron crossrail with the mechanism of vertically displacing and fixing on directing of column;
- main drive with adjustable electric motor;
- feed drives for both support axis with high torque servomotors via ball-screw gear;
- automatic impulse lubrication of firma Vogel for the support guideways and the ball-screw gears;
- hydraulic station with apparatus from European manufacturers;
The following modifications of electrical equipment are available:
1. Vertical lathe with electrical equipment of NC SINUMERIK 802Dsl, digital AC drives SINAMICS S120 of firma SIEMENS. Linear and rotary encoders of firma Heidenhain. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma RITTAL
EUR 319,200 EXW.
2. Vertical lathe with electrical equipment of СNC 8070, digital AC drives, linear and rotary encoders of firma FAGOR. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma RITTAL
EUR 338,100 EXW
3. Vertical lathe with electrical equipment of NC SINUMERIK 840D, digital AC drives SIMODRIVE 611D of firma SIEMENS. Linear and rotary encoders of firma Heidenhain. Control cabinet of firma RITTAL and electric apparatus of firma SIEMENS manufacturers, machine wiring and cables by firma Lappkabel, cable chains by firms IGUS, machine electrical enclosures by firma Rittal, sockets and terminals by firma RITTAL
EUR 351,750 EXW
TIME OF DELIVERY
Lathe is ready for customer`s acceptance at manufacturer`s site after 7-8 months from the contract signing date.

 
  366
IDMA14732
MakeChinese
ModelSVT125x10/5A-NC
YOM
ConditionBrand New
PhotoSee Photo
1.This series machine is suitable for finely and roughly turning cylinder and inner hole, inner and curving of the ferrous, nonferrous metal and some kinds of non-metal materials with carbide and porcelain tools.
2. This series machine is divided into high-speed type, standard type and heavy-duty type.
3. The maximum speed can be 2000m/min when in high speed turning. When the head is in high-speed movement, head in horizontal direction, and vertical rapid movement speed can be 12m/min.
4. Main transmission of SVT80-SVT-160 is driven by AC spindle servomotor, imported gearbox is for two-step speed change. Static and dynamic balance is for workpiece under high – speed transmission gear adopts 5 grade precision and grinding process to realize high efficiency, low noise and move steady under high-speed (not include heavy duty)
5. Feed system is driven AC servomotor which is connected with ballscrew by flexible couple to implement clearance – free transmission and high precision turning.
6. The columns, whose thermal symmetric construction, is calculated by finite element method, stand on table base. Effective vibration insulated method is adopted to ensure high rigidity and strong anti-vibration ability.
7. The table is thermal- symmetric construction. The spindle is centered by high precision double-row short cylindrical roller bearing whose radial clearance can be adjusted. With large high precision thrust ball bearing on axial direction as rolling guideway and all temperature cooling device, the table has high swiveling precision, larger loadability and smaller deformation.
8. Linear dual – direction roller guideway is applied to ensure high effective transmission and good precision reliability in heads and ram’s feed movement.
9. CNC system is SEMENS or FANUC system, and other CNC system is also can be provided on customers’ special requirements.
10. Chip conveyer and half-closed guide are also equipped by consumer’s requirements.
11. On customers’ requirement the following can be supplied : Magazine, built-in tool setting device, boring and milling, table indexing and feed, grounding cooling device, left head and whole-loop control, etc.
Table Dia. 1000 mm,
Max. turning dia. 1250 mm,
Max. height of workpiece 1000 mm,
Max. height of workpiece 5 t,
Speed range of table 4~500 r/min,
Max. cutting force of tool head 12/16 kN,
Max. torque of table 6/8 kN.m,
Horizontal travel -20~850 mm,
Vertical travel 650 mm,
Position of magazine 12,
Rapid travel 12 m/min,
CNC system Siemens (Fanuc),
Main power AC28 (1PH7167) kW,
Travel of cross rail 700 mm,
Grade positioning of cross rail 7,
Pitch positioning of cross rail 100 mm,
Total power 51 kW,
Total weight (Approx.) 17 ton.
top