Category : Turning Machines

Sub-Category : Slant Bed Type Lathe CNC

Total Machines Found : 11

Select | Machine Details
 
  1
IDMI7458
MakeDuplo Standard
Model
YOM
ConditionVery good condition
PhotoSee Photo  |  See Video
Chuck dia 1200 mm ( Manual Chuck )
Swing 1400 mm
Between centre -2500 mm
Control - Fanuc OiTC
 
  2
IDMA29406
MakeVoestweipert
Model
YOM
ConditionGood Condition
PhotoSee Photo
Turning length: 3000 mm,
Swing diameter: 750 mm,
Turning dia over cross slide: 610 mm,
Distance between centres: 3000 mm,
Spindle bore: 106 mm,
Control: CNC Siemens 810 S,
Tools turret place 12 driven tools 6,
Dowels dia: 140,
Feeds: 5.000 mm-min,
Spindle rotation to 3150 Umin,
 
  3
IDMA20606
MakeCincinnati,USA
ModelCobra 2240 CNC
YOM
ConditionBrand New
PhotoSee Photo
Swing Over Bed-560mm, Swing Over Cross Slide-390mm,Swing In Gap-810mm, Distance Between Centers-1000mm,
Front Moveable Chip Trolley, 4-Way Quick-Change Tool Post, Electrical Controls, Induction Hardened & Ground Bed Ways, Hardened & Ground Spindles & Gears in the Headstock, Automatic Lubrication in Headstock, Slide Ways and Ball Screws, Spindle Speeds -(16) 26 to2400 RPM, Spindle Nose-D1-8 (A2-8 With Opt Hyd Chuck),Spindle Bore-80mm, Rapid Traverse Rate (X/Z)-7000 mmpm,Tailstock Quill Taper-5 MT, Weight,6160 LBS, Overall Dimensions-2970 x 2100 x2230mm
 
  4
IDMA20596
MakeMicrocut
Model92HTL
YOM
ConditionBrand New
PhotoSee Photo
Max swing- 600 mm, Max cutting diameter-450 mm, Max cutting length- 1250 mm, Slant bed degree- 45 degree, Chuck size-12 inch, Bar work capacity- 91 mm, Spindle nose- A2-8, Max spindle speed- 2500 mm, Spindle front bearing inner dia- 140-150 mm, Spindle motor power (std)- 18.5/22 Kw, Spindle motor type Fanuc (std)- aP40, Spindle motor type (opt)- 22/26 Kw, Spindle motor type fanuc- aP50, X-axis motor power- 3/12 Kw/Nm, Z-axis motor power- 4/22 Kw/Nm, Turret type-Hydraulic, Turret size- LS-200, Turret number of stations-8, O.D. tool shank size- 32x32 mm, I.D. tool (boring bar) shaft dia- 50 mm, Tailstock quill dia- 90 mm, Tailstock quill taper- 5 MT, Net weight- 8500 kg.
Standard Accesories: Fanuc 0iTC Controller with 8.4" LCD monitor with Manual Guide 0i, 8 position hydraulic turret, regular type
Hydraulic 3-jaw chuck with hard jaws, High pressure coolant system,
Auto lubrication system, Work lamp, Hydraulic unit, Programable tailstock, Fully enclosed splash guard with interlock safety device
Auto lock/unlock door, 2 year Fanuc warranty (except countries list on option), CE, Without toolholders
 
  5
IDMA20594
MakeMicrocut
Model76HTL
YOM
ConditionBrand New
PhotoSee Photo
Max swing- 600 mm, Max cutting diameter-450 mm, Max cutting length- 1250 mm, Slant bed degree- 45 degree, Chuck size-12 inch, Bar work capacity- 91 mm, Spindle nose- A2-8, Max spindle speed- 2500 mm, Spindle front bearing inner dia- 140-150 mm, Spindle motor power (std)- 18.5/22 Kw, Spindle motor type Fanuc (std)- aP40, Spindle motor type (opt)- 22/26 Kw, Spindle motor type fanuc- aP50, X-axis motor power- 3/12 Kw/Nm, Z-axis motor power- 4/22 Kw/Nm, Turret type-Hydraulic, Turret size- LS-200, Turret number of stations-8/12, O.D. tool shank size- 32x32 mm, I.D. tool (boring bar) shaft dia- 50 mm, Tailstock quill dia- 90 mm, Tailstock quill taper- 5 MT, Net weight- 8200 kg.
Standard Accesories: Fanuc 0iTC Controller with 8.4" LCD monitor with Manual Guide 0i, 8 position hydraulic turret, regular type
Hydraulic 3-jaw chuck with hard jaws, High pressure coolant system,
Auto lubrication system, Work lamp, Hydraulic unit, Programable tailstock, Fully enclosed splash guard with interlock safety device
Auto lock/unlock door, 2 year Fanuc warranty (except countries list on option), CE, Without toolholders
 
  6
IDMA20593
MakeMicrocut
Model52HTL
YOM
ConditionBrand New
PhotoSee Photo
Max swing- 600 mm, Max cutting diameter-450 mm, Max cutting length- 1250 mm, Slant bed degree- 45 degree, Chuck size-12 inch, Bar work capacity- 91 mm, Spindle nose- A2-8, Max spindle speed- 2500 mm, Spindle front bearing inner dia- 140-150 mm, Spindle motor power (std)- 18.5/22 Kw, Spindle motor type Fanuc (std)- aP40, Spindle motor type (opt)- 22/26 Kw, Spindle motor type fanuc- aP50, X-axis motor power- 3/12 Kw/Nm, Z-axis motor power- 4/22 Kw/Nm, Turret type-Hydraulic, Turret size- LS-200, Turret number of stations-8/12, O.D. tool shank size- 32x32 mm, I.D. tool (boring bar) shaft dia- 50 mm, Tailstock quill dia- 90 mm, Tailstock quill taper- 5 MT, Net weight- 8000 kg.
Standard Accesories: Fanuc 0iTC Controller with 8.4" LCD monitor with Manual Guide 0i, 8 position hydraulic turret, regular type
Hydraulic 3-jaw chuck with hard jaws, High pressure coolant system,
Auto lubrication system, Work lamp, Hydraulic unit, Programable tailstock, Fully enclosed splash guard with interlock safety device
Auto lock/unlock door, 2 year Fanuc warranty (except countries list on option), CE, Without toolholders
 
  7
IDMA20590
MakeMicrocut
Model92HT
YOM
ConditionBrand New
PhotoSee Photo
Max swing- 600 mm, Max cutting diameter-450 mm, Max cutting length- 750 mm, Slant bed degree- 45 degree, Chuck size-12 inch, Bar work capacity- 91 mm, Spindle nose- A2-8, Max spindle speed- 2500 mm, Spindle front bearing inner dia- 140-150 mm, Spindle motor power (std)- 18.5/22 Kw, Spindle motor type Fanuc (std)- aP40, Spindle motor type (opt)- 22/26 Kw, Spindle motor type fanuc- aP50, X-axis motor power- 3/12 Kw/Nm, Z-axis motor power- 4/22 Kw/Nm, Turret type-Hydraulic, Turret size- LS-200, Turret number of stations-8/12, O.D. tool shank size- 32x32 mm, I.D. tool (boring bar) shaft dia- 50 mm, Tailstock quill dia- 90 mm, Tailstock quill taper- 5 MT, Net weight- 6000 kg.
Standard Accesories: Fanuc 0iTC Controller with 8.4" LCD monitor with Manual Guide 0i, 8 position hydraulic turret, regular type
Hydraulic 3-jaw chuck with hard jaws, High pressure coolant system,
Auto lubrication system, Work lamp, Hydraulic unit, Programable tailstock, Fully enclosed splash guard with interlock safety device
Auto lock/unlock door, 2 year Fanuc warranty (except countries list on option), CE, Without toolholders
 
  8
IDMA20589
MakeMicrocut
Model76HT
YOM
ConditionBrand New
PhotoSee Photo
Max swing- 600 mm, Max cutting diameter-450 mm, Max cutting length- 750 mm, Slant bed degree- 45 degree, Chuck size-10 inch, Bar work capacity- 77 mm, Spindle nose- A2-8, Max spindle speed- 3000 mm, Spindle front bearing inner dia- 130 mm, Spindle motor power (std)- 15/18.5 Kw, Spindle motor type Fanuc (std)- aP30, Spindle motor type (opt)- 18.5/22 Kw, Spindle motor type fanuc- aP40, X-axis motor power- 3/12 Kw/Nm, Z-axis motor power- 4/22 Kw/Nm, Turret type-Hydraulic, Turret size- LS-200, Turret number of stations-8/12, O.D. tool shank size- 25x25 mm, I.D. tool (boring bar) shaft dia- 40 mm, Tailstock quill dia- 90 mm, Tailstock quill taper- 5 MT, Net weight- 5700 kg.
Standard Accesories: Fanuc 0iTC Controller with 8.4" LCD monitor with Manual Guide 0i, 8 position hydraulic turret, regular type
Hydraulic 3-jaw chuck with hard jaws, High pressure coolant system,
Auto lubrication system, Work lamp, Hydraulic unit, Programable tailstock, Fully enclosed splash guard with interlock safety device
Auto lock/unlock door, 2 year Fanuc warranty (except countries list on option), CE, Without toolholders
 
  9
IDMA20588
MakeMicrocut
Model52HT
YOM
ConditionBrand New
PhotoSee Photo
Max swing- 600 mm, Max cutting diameter-450 mm, Max cutting length- 750 mm, Slant bed degree- 45 degree, Chuck size-8 inch, Bar work capacity- 52 mm, Spindle nose- A2-6, Max spindle speed- 4500 mm, Spindle front bearing inner dia- 100 mm, Spindle motor power (std)- 11/15 Kw, Spindle motor type Fanuc (std)- aP22, Spindle motor type (opt)- 15/18.5 Kw, Spindle motor type fanuc- aP30, X-axis motor power- 3/12 Kw/Nm, Z-axis motor power- 4/22 Kw/Nm, Turret type-Hydraulic, Turret size- LS-200, Turret number of stations-8/12, O.D. tool shank size- 25x25 mm, I.D. tool (boring bar) shaft dia- 40 mm, Tailstock quill dia- 90 mm, Tailstock quill taper- 5 MT, Net weight- 5500 kg
Standard Accesories: Fanuc 0iTC Controller with 8.4" LCD monitor with Manual Guide 0i, 8 position hydraulic turret, regular type Hydraulic 3-jaw chuck with hard jaws, High pressure coolant system, Auto lubrication system, Work lamp, Hydraulic unit, Programable tailstock, Fully enclosed splash guard with interlock safety device Auto lock/unlock door, 2 year Fanuc warranty (except countries list on option), CE, Without toolholders
 
  10
IDMA19876
MakeZayer
ModelZF2000
YOM1995
ConditionGood Condition
PhotoSee Photo
Table size 2000 x 800 mm, Longitudinal travel - 1702 mm, Cross travel 1202 mm, Vertical travel - 868 mm, Spindle speeds 35-3000 rpm, Spindle taper ISO 50, Power feed - 6-5000 mm/min, Rapid movement - 15 m/min, Max. load on table - 6000 Kg, Main motor power - 35 HP, Control system Heidenhain TNC 407
 
  11
IDMA18201
MakeHeid
Model
YOM1992
ConditionGood Condition
PhotoSee Photo
Turning- over bed-580 mm, Over x-axis facing slide way-395 mm, Distance between centers-2000 mm, Turning length with automatic steady rest-1720 mm, Spindle- in front bearing- 140 mm, Speed/Drehzahl 4000 Upm, Electrical power/Antriebsleistung 53 kW, C-Axis- 0,001, Tailstock lowering down- 175 mm, Stroke of pinole, automatic-140 mm, Turret-15 fold, Droven tools: Toolpower-14 KW, Automatic steady rest 145 mm, with Y-Axis 100 mm
top