V. K. Engineering - Buying & Selling of Machines made easy

Category : Boring Mills

Sub-Category : Borer Horizontal Floor Type

Total Machines Found : 104

Select

| Machine Details

1

ID	MA38536
Make	WMW Heckert ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Travel 10000x3000x420mm W-axis 900mm 0.001 degree Spindle speed 1200 rpm Heidenhain TNC 155

2

ID	MA38374
Make	Toshiba
Model	BF-13AQ
YOM	1982
Condition	Good Condition
Photo	See Photo
Vertical movement: 2000mm (processing size) Left/right movement: 6000mm (processing size) Attached surface plate: 1200 x 3000 x 2 pieces (5ton x 2=10ton) Machine weight: 25.5 tons

3

ID	MI10498
Make	SKODA
Model	160
YOM
Condition	Good Condition
Photo	See Photo
X 3500 Y 2500 Z 1200 E 20 rotory Floor plate 1 Milling head 1

4

ID	MI10496
Make	SKODA
Model
YOM
Condition	Good Condition
Photo	See Photo
Lenth 9 meter Hight 2.9 meter Spe. 220 Spe mum. 2meter Weight. 140

5

ID	MA37870
Make	Wele
Model
YOM	2011
Condition	Good Condition
Photo	See Photo \| See Video
Travel：X/Y/Z/V/W 6500/5000/2100/2000/600 mm Table：2400x2000mm Table load：25000kg ATC：60T spindle：BT50 3000rpm Controller：FANUC 18i 90 degree head BC head

6

ID	MA37853
Make	Nomura
Model	JFB-130Q
YOM
Condition	Good Condition
Photo	See Photo
Main Shaft Diameter 130 mm Taper Hole Diameter 215 mm Quill Diameter 320 mm Main Spindle Vertical Travel 700 mm Quill Vertical Travel 300 mm Spindle & Quill Max Vertical Travel 1000 mm Range of Spindle Speed & Stages 8 - 800 rpm (18 stages) Range of Spindle Quill Feeds Low Speed Range 0.7 - 35 mm/min High Speed Range 35 - 1750 mm/min Rapid Feed of Boring Spindle & Quill 1750 mm/min Range of Headstock and Column Feeds 0.7 - 1750 mm/min Low Speed Range 0.7 - 35 mm/min High Speed Range 35 - 1750 mm/min Rapid Feed of Headstock & Column 3000 mm/min Headstock Vertical Travel 2000 mm Column Horizontal Travel 4000 mm Spindle maximum Torque 250 Kg-m Machine Dimensions 4000 x 7400 x 5900 mm Machine Weight 22 ton Power 200/220V Rotary Table Working Surface 2000 x 2000 mm Table Travel along the bed 1200 mm Transversal Feed Rate 2.8-8-22.4 mm/min Transversal Rapid Traverse Rate 1245 mm/min Table Load Capacity 20,000 kgs

7

ID	MA37830
Make	SKODA
Model	HFW160D
YOM
Condition	Good Condition
Photo	See Photo
Diameter od spindle 160 mm Travels : X axe - column on bed 2 800 mm Y axe - Headstock on column 1 200 mm Z axe - travel of spindle 1 720 mm Weight of the machine 36 000 kg

8

ID	MA37707
Make	SKODA
Model	W200HBNC
YOM	1984
Condition	Good Condition
Photo	See Photo
Siemens 8 M Spindle dia : 200 mm X -8000mm Y-4150mm 4x Floorplates Milling head

9

ID	MI10108
Make	Collet
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine details:- X 3000mm Y 2500mm Z 1000mm Spindle 160 taper iso 50 With DRO. Floor plate size :- 2400mm x 5000mm

10

ID	MI10010
Make	WMW Union ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Specification of Machine Rotary Table size 2000x1800 Table travel in X axis 2500 mm Table Travel in Y axis 900+450 (head) mm Head Travel Z axis 2500 mm Spindle Size 130 mm dia and Travel 900 mm Rotary Table 360 degree and Longitudinal Travel 1200 mm

11

ID	MA37509
Make	Pama Italy
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Machine work length : 12000 mm Working Height : 2500 mm Quill Diameter : 125 mm Quill Travel : 900 mm Reinforced Manual quill diameter : 230 mm Column Travel : 1200 mm CNC Control : ECS 4801 CNC Controlled Rotary table size : 2500x2500 CNC Controlled Rotary table capacity : 10 Ton

12

ID	MI9809
Make	Ceruti
Model
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE SIZE - 100 X TRAVEL - 6000 MM HEIGHT - 2000 MM Z TRAVEL - 500 MM FLOOR PLATE AVAILABLE FLOOR PLATE SIZE - 5500 MM X 1800 MM

13

ID	MA37050
Make	Wele
Model	HB-650F
YOM	2011
Condition	Good Condition
Photo	See Photo
X 6500mm Y 5000mm Z 1000mm V 2000mm W 600mm Table 2400x2000mm Spindle 3000 rpm BT50 ATC 40T Auto BC head and 90 degree head

14

ID	MI9212
Make	WMW Union
Model	BFT130/5
YOM
Condition	Good Condition
Photo	See Photo
Spindle Size:130mm X Travel :2350mm Y Travel :1700mm Table Size:1400 x1600mm Weight : 35 Tons approx

15

ID	MI9150
Make	Ceruti
Model	100
YOM
Condition	Good Condition
Photo	See Photo
CERUTI 100 spindle Horizontal Boring machine With Tailstock , Milling Head , Facing Chuck. Complete running condition

16

ID	MA36633
Make	Ceruti
Model	AD130
YOM
Condition	Good Condition
Photo	See Photo
Ceruti AD130

17

ID	MA36452
Make	PAMA
Model	FT140
YOM
Condition	Good Condition
Photo	See Photo
� quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: �.pos. Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle speed N: N. Feed axes.: mm/min. Rapid feed: mm/min. Spindle motor: Kw. 70 Weight: Kg. Overall dimension: Mt. CNC ECS 2101 N�2 milling square heads N.2 Floor plate 6000x2000 Longitudinal travel: 7000 mm Spindle travel: 900+900 mm Cross travel: 1500 mm Vertical travel: 4000 mm Spindle diameter: 140 mm Table dimension: 1800x1800 mm Spindle speed: 1200 rpm CNC: ECS

18

ID	MA36451
Make	PAMA
Model	Speedram 4
YOM
Condition	Good Condition
Photo	See Photo
STROKE Z AXIS + L AXIS mm 2.200 VERTICAL HEAD Y mm 5.000 CROSS X 10,000 mm RAM SECTION mm 440 x 500 SPINDLE DIAMETER 203.4 mm SPINDLE CTAPER ISO 50 SPINDLE SPEED RPM 2 -1400 SPINDLE TRAVEL mm 1000 MOTOR POWER KW 100 SIEMENS CNC 840 C ROTATING TABLE PAMA MOD.HHS T4 CAPACITY 60 TON DIMENSIONS 3000 X 3000 N.3 STOLLE FLOOR PLATES MM. 5400 X 3000 AUTOMATIC TOOL LOCKING AND UNLOCKING INTERNAL AND EXTERNAL REFRIGERANT SYSTEM AUTOMATIC BIROTATIVE UNIVERSAL HEAD MODEL TS50 144 CHIP CONVEYOR ELECTRONIC HANDWHEEL LEVELING PLATES TELESCOPIC PROTECTIONS TOOL CHANGE 60 P. Spindle taper: ISO 50 Longitudinal travel: 10000 mm Spindle travel: 1000 mm Cross travel: 1200 mm Vertical travel: 5000 mm Spindle diameter: 203.4 mm Table dimension: 3000x3000 mm Spindle speed: 1400 rpm CNC: SIEMENS 840C

19

ID	MA36450
Make	Schiess,German
Model	FB28-16
YOM
Condition	Good Condition
Photo	See Photo
� quill: mm. 160 Spindle taper : ISO travel X(Column) : mm. 8000 travel Y: mm. 4000 Spindle speed : RPM.800 Spindle motor: Kw. 60 Longitudinal travel: 8000 mm Spindle travel: 750 mm Cross travel: 1350 mm Vertical travel: 4000 mm Spindle diameter: 160 mm Spindle speed: 800 rpm

20

ID	MA36416
Make	WMW Union
Model	BFT130/5
YOM
Condition	Good Condition
Photo	See Photo
770mm Diameter Facing Head, 40 Int Spindle 2000mm x 1800mm Table, 1800mm Vertical Travel 2000mm Cross Travel, Spindle 4.5 � 900RPM, Anilam Wizard 211 3 Axis DRO, Total Weight 36Tons,

21

ID	MI8850
Make	WMW
Model	W160
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia 160 mm Wmw Union X axis - 6000 mm Y axis - 2500 mm Z axis - 1000 mm Spindle power 30 HP with VFD drive X axis, Y axis and Z axis separate ac motor with VFD drive Floor plate 02 nos 1500 � 1500 mm Without Rotary table

22

ID	MI8800
Make	Gilly
Model	4D
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER MM ROTARY TABLE 2000MM X 2000MM MAX. LOAD 20-25 TON TOTAL POWER REQUIREMENT 18.5 KW WEIGHT OF THE MACHINERY 14 ton Control: Conventional

23

ID	MI8799
Make	Collet
Model
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER 115 MM VERTICAL HEAD TRAVEL, Y 1750 MM Z TRAVEL 3600 MM BED MOVEMENT 1000 MM SPINDEL MOVEMENT 1350 MM ROTARY TABLE 2270MM X 2270MM MAX. LOAD 20-25 TON DIMENSION LENGTH 4000 MM HEIGTH 2500 MM WIDTH 6000 MM TOTAL POWER REQUIREMENT 18.5 KW WITH 1 ROTARY TABLE 1 FLOOR PLATE Control: Conventional

24

ID	MI8798
Make	Mibi Rumainan
Model	AFD100
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER 100MM TABLE SIZE 1220 X 1500 MM TRAVEL X/Y/Z 1500 x 1500 x 1500MM TAPER IN SPINDLE ISO 50 MORSE TOTAL POWER REQUIREMENT 5.5 KW WEIGHT OF THE MACHINERY 10Ton Control: Conventional.

25

ID	MI8797
Make	Cornac
Model	100
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER 100 MM CROSS ( X) TRAVEL 1300 MM VERTICAL ( Y ) TRAVEL 1200 MM LONGITUDNIAL ( Z ) TRAVEL 1220 MM ROTARY TABLE 1250 X 1250 MM SPINDLE ( W ) TRAVEL 900 MM FACING HEAD DIAMETER 600 MM 3 AXIS DRO MACHINE WEIGHT 11400Kg. MACHINE FLOOR SPACE 2850x6050mm SPINDLE MOTOR POWER 10K/W Control: conventional

26

ID	MI8796
Make	Cornac
Model
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER 100 MM CROSS ( X) TRAVEL 1300 MM VERTICAL ( Y ) TRAVEL 1250 MM LONGITUDNIAL ( Z ) TRAVEL 1250 MM ROTARY TABLE 1250 X 1250 MM SPINDLE ( W ) TRAVEL 900 MM FACING HEAD DIAMETER 600 MM 3 AXIS DRO MACHINE WEIGHT 11400Kg. MACHINE FLOOR SPACE 2850x6050mm SPINDLE MOTOR POWER 10K/W Control: Conventional

27

ID	MI8795
Make	TOS
Model	H100A
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER 100 MM CROSS ( X) TRAVEL 1300 MM VERTICAL ( Y ) TRAVEL 1250 MM LONGITUDNIAL ( Z ) TRAVEL 1250 MM ROTARY TABLE 1250 X 1250 MM SPINDLE ( W ) TRAVEL 900 MM FACING HEAD DIAMETER 600 MM 3 AXIS DRO MACHINE WEIGHT 11400Kg. MACHINE FLOOR SPACE 2850x6050mm SPINDLE MOTOR POWER 10K/W Control: Conventional.

28

ID	MI8794
Make	Tos Czech
Model	H100A
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER 100 MM CROSS ( X) TRAVEL 1300 MM VERTICAL ( Y ) TRAVEL 1250 MM LONGITUDNIAL ( Z ) TRAVEL 1250 MM ROTARY TABLE 1250 X 1250 MM SPINDLE ( W ) TRAVEL 900 MM FACING HEAD DIAMETER 600 MM 3 AXIS DRO MACHINE WEIGHT 11400Kg. MACHINE FLOOR SPACE 2850x6050mm SPINDLE MOTOR POWER 10K/W

29

ID	MI8793
Make
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Type OF CONTROL CONVENTIONAL YEAR OF MANUFACTURE UNKNOWN SPINDLE DIAMETER 100 MM CROSS ( X) TRAVEL 1450 MM VERTICAL ( Y ) TRAVEL 1250 MM LONGITUDNIAL ( Z ) TRAVEL 1250 MM ROTARY TABLE 1250 X 1250 MM SPINDLE ( W ) TRAVEL 900 MM FACING HEAD DIAMETER 600 MM 3 AXIS DRO MACHINE WEIGHT 14500Kg. MACHINE FLOOR SPACE 2850x6050mm SPINDLE MOTOR POWER 10K/Wtock No: 4B

30

ID	MI8789
Make	schiess Dorris
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 180mm Cross Travel : 6000mm Vertical Travel : 3000mm Spindle Travel : 1600mm Rotary Table : 2000 x 2000mm 2nos. Floor Plate 2nos. Milling Head

31

ID	MI8500
Make	Asquith
Model	150
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia .: 150mm Spindle Movement : 1300mm Cross Travel : 3500mm Vertical Travel : 2300mm Rotary Table Size : 2000mm1800mm Floor Plate Size : 3000mm1500mm - 2 Pcs.

32

ID	MI8499
Make	SKODA
Model	WD200A
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter - 200 MM Ram Size- 520 x 520 MM Vertical Head Travel, Y- 3300 MM Horizontal Column Travel, X - 4500 MM Ram Travel -1600 MM Spindle Travel - 2000 MM Spindle Speeds: 1.5 to 630 RPM Spindle Taper: #120 Metic W/#50 Adapter Rapid Traverse: 3200 mm/min Feeds: Spindle- 0.5 - 3200 MM Ram - 05 - 3200 MM Vertical - 1 - 3200 MM Longitudinal - 1 - 3200 MM Equipped With: Rotary table model E20 , size : 2000x2000mm, 20Tons Loading capacity Floor Plates : 3750 x 1250 x 300 MM, 2 Nos.

33

ID	MI8498
Make	WMW
Model	BFP125
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 125mm Cross Travel : 3000mm Vertical Travel : 1600mm With Facing Chuck , Tail Stock Rotary Table : 1500*1500mm Floor Plate 1no.

34

ID	MI8497
Make	Schiess Defries
Model	180
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 180mm X Travel : 6000mm Y Travel 3000mm Spindle Travel :1600mm Rotary Table Size :2000mm2000mm Rotary Table Travel : 2800mm Floor Plate : 30001750mm -2nos. Milling Head 2nos

35

ID	MI8493
Make	Gilly
Model	GB100
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Spindle dia.- 100mm Travels : 1200 x 1400 x 3100mm Chuck : 670mm Box table : 1300 x 1100mm Rotary : + 360mm Tilting Spindle speed : 0~1200 RPM Quill : 900mm Spindle taper : 62mm Accessories With Facing head Other Details (Approx) Power Required : 440V/18.5KW, Phase : 3 Air Required : Working Space : F-B: 8�-6�, L-R: 21�, HT: 11� Net Weight : 12 Tons

36

ID	MI8492
Make	WMW
Model	W160
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Spindle Dia � 160mm Longitudinal Travel � 3000mm(Extendable) Vertical Travel � 2050mm Spindle Travel � 1200mm Rotary Table � 1800 x 1800mm Floor Plate � 5300 x 1800mm Facing Chuck � 825mm Rotary Angel � 360� Main Motor � 25HP Rotary Table Motor � 5HP Accessories With DRO (3 Axis) Facing Chuck Rotary Table Other Details (Approx) Power Required : 440V/11KW Phase : 3 Working Space : F-B : 11�, L-R : 17�, HT : 14�-7� Net Weight : 42TONS

37

ID	MA36164
Make	Lazatti
Model	HB150
YOM
Condition	Good Condition
Photo	See Photo
Travel X :7000 mm Spindle :150 , iso50 Vertical Height : 2500 mm Ram travel 1500 mm Spindle travel : 1200 mm Union Rotary Table 2000x1800 mm. 4 Floor plates 3000x1750 mm

38

ID	MA36136
Make	WMW
Model	BFP130
YOM
Condition	Good Condition
Photo	See Photo
Travel in the X axis 10000 Travel in the Y axis 1900 Table length 1800 Table width 1800 Spindle diameter 130 Spindle speed 3.5-710 Power 18.5 kW Floor plates: 1850x3450x360 (4 Pcs)

39

ID	MA36004
Make	SKODA
Model	PCW200HA
YOM	1987
Condition	Good Condition
Photo	See Photo
Power of the spindle drive: 77 kW Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 5000 mm Y-Axis travels: 4000 mm Z-Axis travels: 1600 mm Maximum feed rate in X-axis: 4000 mm/min Maximum feed rate in Y-axis: 4000 mm/min Maximum feed rate in Z-axis: 4000 mm/min Taper: ISO 60 Spindle diameter: 200 mm Maximum boring depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Travel of the stand on the bed: 5000 mm Equipment: Table

40

ID	MA35745
Make	WMW Union ,Germany
Model	BFP130/5
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Spindle diameter 130mm, Spindle traverse 1000mm, Head stock vertical traverse y 2500mm, Column horizontal traverse 7000mm and 400mm Cross Traverse, Spindle Speeds 4.5-180 rpm Facing & 4.5-900 rpm, Spindle Feed rate 0.03-48mm per Minute, Spindle bore 50 ISO, Facing head diameter 785mm, Facing slide cross movement 320mm, ROTARY TABLE MRD 1800x2000 mm WMW UNION wmw rotary table details table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx.2,000 x 1,800mm Max. weight of workpiece, approx.12,500kg Table travel, longitudinal1,250mm Table height above floor 920mm Longitudinal feed0.63 - 2,000mm/min Turning feed, with � 1,000 mm1 - 3,150mm/min Longitudinal quick feed2,000mm/min Turning quick feed, with � 1,000 mm3,150mm/min Weight of machine7,500kg External dimensions of machine3,700 x 2,100 x 920mm Total electrical 1- 180 V - 50Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. TOTAL WEIGHT OF MACHINE : 60 TONES

41

ID	MI8129
Make	Schiess Defries
Model	180
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 180mm X Travel : 6000mm Y Travel : 3000mm Spindle Travel : 1600mm Rotary Table Size : 2000mm x 2000mm Rotary Table Travel : 2800mm Floor Plate : 3000 x 1750mm � 2nos. Milling Head 2nos

42

ID	MI8125
Make	Innocenti
Model	CWB-ALF147.5
YOM
Condition
Photo	See Photo
Travels X x Y - 6500 mm x 3000 mm Boring Spindle Diameter - 150 mm Milling Spindle Diameter - 204 mm Spindle Taper - SA 50 Spindle Speed - 2.6-640 rpm Spindle Travel - 1500 mm Ram Travel - 750 mm Total Ram + Spindle - 2250 mm Spindle Motor - 30/40 HP Distance Between Spindle & Floor Plate Min x Max - 870 mm x 3870 mm Ram Type Floor Boring Accessories : 4 Axis DRO Face Plate 1 Milling Head Rotary Table - 2000 mm x 2000 mm (15T Load Cap.) Floor Plates - 2500 mm x 8000 mm

43

ID	MA35586
Make	Scharmann
Model	Heavycut.2
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: HEIDENHAIN TNC 407 CNC CONTROL SQUARE RAM AND SPINDLE RIGHT ANGLE HEAD SPECIFICATIONS: SPINDLE DIAMETER - 150 MM MILLING SPINDLE DIAMETER - 280 MM SPINDLE TAPER- CAT 50 RAM CROSS SECTION - 300 MM X 300 MM VERTICAL HEAD TRAVEL, Y-AXIS - 137.79 COLUMN TRAVEL, X-AXIS - 18100 MM QUILL TRAVEL, Z-AXIS - 595 MM RAM TRAVEL, W-AXIS - 701 MM Z & W AXIS, COMBINED - 1296 MM SPINDLE SPEEDS - 5.5-1000 RPM SPINDLE FEED RANGE - .040-240 IPM RAPID TRAVERSE - 240 IPM SPINDLE MOTOR - 60 HP EQUIPPED WITH: HEIDENHAIN TNC 407 CNC CONTROLS SLIDING WAY COVERS X-AXIS BEDWAYS RIGHT ANGLE HEAD WITH 1 DEGREE MANUAL INDEXING 60 HP SPINDLE MOTOR ALSO AVAILABLE AT ADDITIONAL COST: CNC & MANUAL ROTARY TABLES, FLOOR PLATES AND ANGLE HEADS

44

ID	MI8120
Make	SKODA
Model	WD200
YOM	1968
Condition	Good Condition
Photo	See Photo \| See Video
Dia. of work spindle : - 200 mm Ram size : - 520x520 Taper in spindle :- metric 120 Max. torque on spindle : 200000 kg-cm Max. depth of boring with spindle :- 2000 mm Travel of ram : - 1600 mm Vertical travel of spindle head along column(Y) Travel :- 3750 mm Hor. travel of column on bed (X) Travel :- 6000 mm Lowest position of spindle axis above floor plate :- 800 mm spindle speeds (infinitely variable) :- 1.6 to 680 rpm Max. speed of spindle when : - 1.6 to 300 shifting . Boring feeds :- 1.6 to 1600 mm/min Milling feeds :- 1.6 to 1600 mm/min Rapid traverse :- 1600 mm/min. Thread cutting (metric ) :- 0.5 to 12 mm (inch) :- 1 to 28 T.P.I spindle drive : - 35.5 kW Floor plates - 7200mm x 3600mm

45

ID	MA35522
Make	Skoda Czech
Model	WD160
YOM	1975
Condition	Good Condition
Photo	See Photo
Feature : 2845 mm Combined ram & spindle travel/reach universal angle head digital readouts Specifications: Spindle diameter - 160 mm Vertical head travel, y-axis -2500mm column travel, X-axis - 5000 mm spindle travel, Z-axis - 1600 mm ram travel, Z-2 axis - 1250 mm ram & spindle travel,combined - 2850 mm ram cross section - 450 mm x 450 mm spindle speeds: 4-ranges - 2-800 RPM spindle taper - #50 rapid traverse - 126 IPM EQUIPPED WITH: full pendant controls digital readouts universal angle head power draw bar way covers on x axes chip conveyor work light 50 HP spindle drive 440/3/60

46

ID	MA35213
Make	Toshiba Shibaura
Model	BF13AQ
YOM	1978
Condition	Good Condition
Photo	See Photo
SPINDLE & QUILL TRAVEL FULL PENDANT CONTROLS DIGITAL READOUTS CAPACITY: SPINDLE DIAMETER 130 MM QUILL DIAMETER 180 MM MILLING SPINDLE SLEEVE DIAMETER 340 MM VERTICAL TRAVEL Y-AXIS 2500 MM COLUMN TRAVEL, X-AXIS 6000 MM SPINDLE TRAVEL, Z-AXIS 899 MM QUILL TRAVEL, Z-2 AXIS 350 MM COMBINED SPINDLE & QUILL TRAVEL 899 MM SPINDLE TAPER #50 SPINDLE SPEEDS (24) 4-800 RPM FEEDS (16) .0018-.315 IPR ELECTRICS 230/460/3/60 APPROX MACHINE FOORPRINT 8179 MM X 3429 MM MACHINE HEIGHT 5105 MM EQUIPPED WITH: FULL PENDANT CONTROLS OPERATOR'S PLATFORM 3-AXIS DIGITAL READOUTS POWER DRAW BAR HARDENED AND GROUND WAYS ON ALL AXES SLIDING STEEL WAY COVERS ON X-AXIS 30 HP SPINDLE DRIVE MOTOR

47

ID	MI7882
Make	Collet
Model
YOM
Condition	Good Condition
Photo	See Photo
X 8000 ( Cross) Y 3750 ( Vertical) Z1200 ( RAM ) All Axis With Ball screw With Chuck & Milling Head Spindle ISO50 Spindle Diameter 150MM Equipment Rotary Table 2000 X 2000

48

ID	MA34656
Make	Skoda Czech
Model	W200G
YOM	1980
Condition	Excellent
Photo	See Photo
X 10.500 x Y 4.150 mm With Skoda 2.200 x 2.200 mm in-feeding Rotary table ISO 60 spindle DRO to all axis Universal milling head Modern electrics

49

ID	MA34450
Make	Mitsubishi
Model	MAF-RS-150B
YOM	1987/2002
Condition	Good Condition
Photo	See Photo
EQUIPPED WITH: FANUC 12M CNC CONTROL TOOL LIFE MANAGEMENT - TOOL LIFE MEASUREMENT MITSUBISHI AUTO PALLET CHANGER WITH (2) 3000 X 2100mm CONTOURING ROTARY TABLES 80-STATION AUTOMATIC TOOL CHANGER FOR SPINDLE RIGHT ANGLE HEAD, AUTO INDEXING RH15M RIGHT ANGLE HEAD, AUTO INDEXING RH15LS UNIVERSAL ANGLE HEAD 3-STATION AUTOMATIC ATTACHMENT CHANGER 60-STATION AUTOMATIC TOOL CHANGER FOR ATTACHMENTS AUTOMATIC ATTACHMENT 90 DEGREE INDEXING THRU SPINDLE COOLANT & FLOOD COOLANT SYSTEM SPINDLE AIR BLOWER SYSTEM - SPINDLE ORIENTATION POWER OPERATORS PLATFORM - RS232 PORT BALL SCREWS & DC SERVO DRIVES - HARDENED & GROUND WAYS STEEL SLIDING WAY COVERS - FULL LENGTH CHIP CONVEYOR CATALOGUE SPECIFICATIONS: SPINDLE DIAMETER, MAIN SPINDLE 150mm SPINDLE DIAMETER, MILLING 210mm SPINDLE TAPER #50 CAT BORING SPINDLE THRUST, MAX. 3ton SPINDLE TRAVEL, (W-AXIS) 900mm HEADSTOCK TRAVEL HORIZONTAL, (Z-AXIS) 700mm COLUMN LONGITUDINAL TRAVEL (X-AXIS) 6000mm SPINDLE-HEAD VERTICAL TRAVEL (Y-AXIS) 3000mm HEADSTOCK & SPINDLE TRAVELS (Z-AXIS) 1600mm SPINDLE SPEEDS (MAIN), RANGE 8 TO 1800 RPM MILLING FEEDS, RANGE 0.04 TO 157.48 IPM RAPID FEEDS, RANGE 393.70 IPM PALLET LOAD CAPACITY 20tons PALLET CROSS TRAVEL, (V) 1500mm SPINDLE MOTOR, HORSEPOWER 40/50 HP FLOOR SPACE 15.6m L-R X 9.3m F-B OVERALL HEIGHT 6.33m WEIGHT 41ton NOTE: THIS MACHINE HAD A COMPLETE MAINTENANCE OVERHAUL IN 2002 WHICH INCLUDED A NEW AC SPINDLE DRIVE

50

ID	MA34358
Make	SKODA
Model	W160HA
YOM	1985
Condition	Good Condition
Photo	See Photo
Spindle jole diameter - 160mm Spindle cone - 50mm Boring length by spindle - 1600mm Quill shift - 1250mm Spindle stock's travel along the column - 2500+4000mm Spindle stock's travel along the bed - 3000+20000mm Weight - 69200kg

51

ID	MA34313
Make	WMW Union ,Germany
Model	BFP130/6
YOM	1996
Condition	Good Condition
Photo	See Photo
CNC control HEIDENHAIN TNC 360 - facing head - spindle 130 mm - spindle taper ISO 50 - spindle max RPM 900 - X=6000 mm - Y=2500 mm - Z=900 mm - W=360 mm - rotary table TI 1800, table surface 1800x2000 mm, table load 12500 kg, X table move =1200 mm

52

ID	MA34309
Make	SKODA
Model	W200HC
YOM	1992
Condition	Good Condition
Photo	See Photo
MAKE : skoda MODEL : w200hc YOM :1992 Spindle working diameter : 200 X axis travel : 8000mm Y axis travel : 3150mm Spindle speed :1-800rpm Spindle travel (w) : 2000mm Ram travel (H) : 1600MM SPINDLE TAPER : iso 60 Main power : 75kw Equipped with rotay table skoda �tos E25 Load capacity : 25T Clamping surface : 2000mm X 2000mm Milling head : two T- slot Sloor plates : 400mm X 1885mm X 11200mm(one piece: 400mm x 1885mm x 5600mm ) Lifting advice on the machine stand - load capacity 750KG. Total weight : 120 tons (W200HC = 94500kg, E25 =9500kg,TWO T SLOT FLOOR PLATES = 16000kg)

53

ID	MA34275
Make	Skoda Czech
Model	WT200H/17700
YOM	1982/GO 2008
Condition	Good Condition
Photo	See Photo \| See Video
Longitudinal displacement of the stand along the bed: 17,740 mm Vertical displacement of the headstock on the stand: 5,000 mm Square extension: 1,618 mm Quill extension: 1,990 mm Max. travel of the quill to the floor: 370 mm Quill diameter: 200 mm Quill taper: ISO 60-Hydraulics Quill speed: 1.6-650 rpm Spindle Dia 200 mm Machine Weight 85000 + 10000 kg

54

ID	MA34221
Make	SKODA
Model	W200
YOM	1972
Condition	Very good condition
Photo	See Photo
X-axis of 4000mm, Y-axis-3150mm Z-axis � 1600mm the machine underwent a complete modernization of the electrical part, with the replacement of all drives, there are 4 digital DC electric drives EMERSON (England), all motors, modern linear displacement sensors BALLUFF (Germany), a color control panel MITSUBISHI (Japan), the electrical cabinet is completely new, the lubrication system has been replaced and much more. The machine is completed with a SKODA E20 rotary table (2000 * 2000mm) and mounting plates 2500 * 3000mm-2 pcs.

55

ID	MA34151
Make	SKODA
Model	W200A
YOM	1972
Condition	Good Condition
Photo	See Photo
Spindle diameter - 200mm Table - 2200x2200mm Table capacity - 20000kg X travel - 4000mm Y travel - 4000mm Z travel - 2000mm Weight - 86200kg

56

ID	MA34121
Make	Scharmann
Model
YOM
Condition	Good Condition
Photo	See Photo
X travel: 3700 mm, Y travel: 2700 mm, Z travel: 1000 mm, Spindle speed: 2880 RPM, Table load: 2000 kg

57

ID	MA34008
Make	Toshiba
Model	BFD-200 5-Axis
YOM	1986
Condition	Good Condition
Photo	See Photo
FEATURES: Fanuc 12M 5-Axis CNC Control: 12-Station Automatic Attachment Changer: 80-Station Automatic Tool Changer: (10) Assorted Straight Heads & Angle Heads: (1) 2-Axis Articulating Head: TRAVELS: Column Travel, X-Axis: 12300 MM Vertical Head Travel, Y-Axis: 3200 MM Ram Travel, Z-Axis: 1000 MM Nutating Head Attachment, C-Axis: +180.5/-180.5 Deg. Nutating Head Attachment, A-Axis: +90.5/-90.5 Deg. Healing Jib, U-Axis: +/-.150012 MM CAPACITY: Milling Spindle Diameter: 200 MM Ram Cross Section: 450 MM x 520 MM Spindle Taper: #50 / #60 Taper Spindle Speeds, Variable: 10-3000 RPM Spindle Motor: 89 KW Cutting Feeds: 4000 MM/MIN Rapid Traverse, X-Axis: 15000 MM/MIN Rapid Traverse, Y,Z, Axes: 6000 MM/MIN EQUIPPED WITH: Fanuc 12M 5-Axis CNC Control 12-Station Automatic Attachment Changer 80-Station Automatic Tool Changer Assorted Straight Heads & Angle Heads 2-Axis CNC Head Milling Head A & C Axis Coolant Thru Spindle Steel Telescoping Way Covers Elevating Operators Platform Full Length Chip Conveyor Remote Pendant NOTE: Inspect In Our Philadelphia PA Warehouse AVAILABLE AT ADDITIONAL COST: TOSHIBA MODEL BR-30 (NCC)-12 IN-FEEDING ROTARY TABLE (SEE REF #28486): Table Size Table Infeed, V-Axis Table Rotation, Full B-Axis Table Weight Capacity Rapid Traverse Cutting Feed

58

ID	MA33390
Make	Skoda Czech
Model	W200
YOM	1964/1991
Condition	Good Condition
Photo	See Photo
Approx. Machine weight: 60000 kg Main drive -Spindle speed range: 630 rpm 1/MIN Movement X-AXIS Movement: 4000 mm Y-AXIS Movement: 3150 mm Z-AXIS Movement: 2000 mm Workpiece Workpiece weight: 20000 kg Table Outer length: 1400 mm Outer width: 1400 mm Additional Equipment Rotary Table Skoda E 20 (2000 x 2000 mm, 20 t), year 1967 2 pcs of floor plates : 2x 1870 x 6400mm 2 pcs of milling heads Metric 120 spindle taper- Ram movement 1600 mm- Spindle diameter 200 mm- Ram size 520 x 520 mm- Main motor power 35 kw- Tesla digital read-out Metric 120 spindle taper Ram movement 1600 mm Spindle diameter 200 mm Ram size 520 x 520 mm Main motor power 35 kw Tesla digital read-out

59

ID	MA33342
Make	Froriep
Model	BFN 150
YOM	1968/2008
Condition	Good Condition
Photo	See Photo
Travel X / Y / Z / W = 7,000 / 4,165 / 1,500 / 800 mm spindle � 150 mm / 240 mm Spindle rotation RPM 3,15 -800 power 105 KW Tool ISO 50 table 4,000x4,000 mm max weight 60 ton The table was purchased in 2008 and is CNC complete with the Siemens systems. It has a B and a V axis (= 2500 mm). The other axes are served with the digital display. In 2008 the machine was completely retrofitted geometrically.

60

ID	MA33156
Make	TOS
Model	WD130A
YOM	1981
Condition	Good Condition
Photo	See Photo
Working spindle diameter - 130 mm Extend working spindle - 1120 mm Vertical spindle adjustment - 2300 mm Adjusting the stand on the bed - 3200 mm Bed length - 5230 mm Floor plan of the machine - 7250 x 7680 Machine weight - 26700 kg

61

ID	MA32952
Make	Ceruti
Model	ADM125
YOM	1999
Condition	Good Condition
Photo	See Photo
COLUMN TRANSVERSAL TRAVEL (X) 6.000 MM. HEAD VERTICAL TRAVEL (Y) 2.100 MM. SPINDLE TRAVEL (Z): 900 MM. SPINDLE  - ISO 50 125 MM. SPINDLE MOTOR POWER 20 HP. SPINDLE SPEEDS - N. 24 5 - 1.000 RPM. TOTAL WEIGHT 33 TONS. COMPLETE WITH: - D.R.O - 3 AXIS - BIROTATIVE MILLING HEAD - BALL SCREWS - NEW ELECTRIC CABINET AND D.C. MOTORS FOR FEEDS

62

ID	MA32941
Make	Juaristi
Model	MDR110
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter : 110mm X axis travel : 7000mm Y axis travel : 1500mm Z axis travel : 400mm+800mm w Tool Taper : ISO 50 Equipped with Digital, Facing plate, 3 boring plates (2500x1200), hydraulic mooring Equipment : D.R.O, facing chuck, 3 x floor plates (2500x1200), hydraulic locking

63

ID	MI7171
Make	Innocenti
Model	ALF147-5
YOM	1970
Condition	Good Condition
Photo	See Photo
Travels x 6500 mm y 3000 mm� Boring Spindle diameter 150 mm� Milling spindle diameter 204 mm Spindle taper SA 50� Spindle speed 2,6 - 640 rpm� Spindle travel 1500 mm� Ram travel 750 mm� Total Ram + Spindle 2250 mm� Spindle motor 30/40 HP� Distance between Spindle-Floor plate mini/maxi 870/3870mm Accessories: 4 Axis DRO Face plate � 1 milling heads Rotary table 2000 x 2000 mm �/ 15 tons load cap. Floor plates 2500 x 8000 mm Machine price as is without panel, we build new panel with the cost of 10 lakhs

64

ID	MI7160
Make	Froriep German
Model	A180
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia- 180 mm Spindle Travel- 1800 mm Spindle Taper- ISO 50 Travel X-axis � 16,000 mm Max. Height- 3,000 mm Rotary table - 2500 x 2000 mm Floor plate- 2250 x 4000 mm ( 4 No�s) With Digital read out Power- 35 kw

65

ID	MA32734
Make	WMW Union
Model	BFP130/6
YOM
Condition	Good Condition
Photo	See Photo
spindle diameter : 130 mm drill depth : 1380 mm x-travel : quer:2500 mm y-travel : h�he:1600 mm z-travel : l�ngs.380 mm w-axis : 900 Bohrspindelvorschub mm U-axis : 320 Planschiebervorsch. mm control : HdN TNC 320 tool taper : ISO SK50

66

ID	MA32732
Make	Union Gera
Model	BFP125
YOM
Condition	Good Condition
Photo	See Photo
spindle diameter : 125 mm x-travel : 2500 mm y-travel : 1400 mm z-travel : 900+H 1090 mm W-axis (spindle longitudinal) : 1090 mm table travel longitudinal : 900 (z-Achse) mm table : 1480x1480 mm spindle taper metric : 80 feed range - spindle : spindle/husillo : 0,004-48 mm/U rapid traverse : spindle/husillo : 900 mm/min feed range - support/ continuous : 0,07-24 mm/U rapid traverse : Plansupport/ support:450 m/min

67

ID	MA32587
Make	WMW Union ,Germany
Model	BFT130
YOM	1994
Condition	Good Condition
Photo	See Photo
CAPACITIES: SPINDLE DIAMETER 5.12" SPINDLE TAPER ISO 50 VERTICAL TRAVEL OF HEAD, Y-AXIS 118.11" HORIZONTAL COLUMN TRAVEL, X-AXIS 275.59" COLUMN INFEED, Z-AXIS 16.55" SPINDLE TRAVEL, W-AXIS 35.43" SPINDLE SPEEDS, 4-RANGES 5-1000 RPM RAPID TRAVERSE, X & Y AXES 196.85 IPM RAPID TRAVERSE, Z & W AXES 118.11 IPM FEEDS, ALL AXES 98.42 IPM APPROXIMATE OVERALL MACHINE WEIGHT 90,000 LBS TOS 86.6" X 86.6" INFEEDING ROTARY TABLE: TABLE SIZE 86.6" X 86.6" TABLE INFEED 59.05" TABLE FEEDS, LONGITUDINAL .05 - 6.2 IPM TABLE RAPIDS,LONGITUDINAL 78.11" IPM ROTARY, FEEDS @ 41.14" DIA. .05 - 6.2 IPM ROTARY, RAPIDS @ 41.14" DIA. 78.74" TABLE WEIGHT CAPACITY 39,600 LBS NUMBER T-SLOTS 9 T-SLOT CENTER DISTANCE 9.84" NUMBER CROSS SLOTS 2 CENTER HOLE DIAMETER 11.81" CENTER HOLE DEPTH .39" TABLE HEIGHT 37.4" APPROXIMATE OVERALL TABLE WEIGHT 25,300 LBS OVERALL DIMENSIONS 157.48" X 103.2" MACHINE EQUIPPED WITH: HEIDENHAIN TNC 355 CNC CONTROL SPINDLE SUPPORT TOS INFEEDING ROTARY TABLE TELESCOPING STEEL WAY COVERS ON X-AXIS INDEPENDENT AC SERVO MOTOR DRIVES HARDENED & GROUND WAYS STEEL SLIDING WAY COVERS 67 HP SPINDLE DRIVE MOTOR

68

ID	MA32586
Make	WMW Union ,Germany
Model	BFT130
YOM	1989
Condition	Good Condition
Photo	See Photo
CAPACITIES: SPINDLE DIAMETER 5.12" SPINDLE TAPER ISO 50 VERTICAL TRAVEL OF HEAD, Y-AXIS 98.42" HORIZONTAL COLUMN TRAVEL, X-AXIS 314.96" COLUMN INFEED, Z-AXIS 15.75" SPINDLE TRAVEL, W-AXIS 35.43" SPINDLE SPEEDS, 4-RANGES 5-1000 RPM RAPID TRAVERSE, X & Y AXES 196.85 IPM RAPID TRAVERSE, Z & W AXES 118.11 IPM FEEDS, ALL AXES 98.42 IPM APPROXIMATE OVERALL MACHINE WEIGHT 90,000 LBS MACHINE EQUIPPED WITH: HEIDENHAIN TNC 355 CNC CONTROL 31.5" CNC PROGRAMMABLE FACING HEAD RIGHT ANGLE HEAD SPINDLE SUPPORT TELESCOPING STEEL WAY COVERS ON X-AXIS INDEPENDANT SERVO MOTOR DRIVES HARDENED & GROUND WAYS STEEL SLIDING WAY COVERS 67 HP SPINDLE DRIVE MOTOR

69

ID	MA32387
Make	Pegard
Model	Euromill225
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 225 mm, X-1400, Y: 5000, Z: 1500 Rotary table: 5000 x 3000 mm, Max wok piece weight: 120 ton

70

ID	MA32206
Make	WMW Union ,Germany
Model	BFP130/5
YOM	1980
Condition	Good Condition
Photo	See Photo
Spindle diameter : 130 mm, Cross Travel Column (X): 4200 mm, Vertical Travel Head stock (Y): 2500 mm, Spindle travel: 1000 mm W axis: 400 mm ISO 50 spindle taper Main motor power : 18.5 KW Total weight ab. 44 ton The machine is delivered with following accessories: One rotary table :1800 x 2000 mm Heckert One Faceplate One milling head 3 pcs. floor plates 1750 x 3500 x 350 mm

71

ID	MI7059
Make	Pama Italy
Model	Speedram 4
YOM	2000-2001
Condition	Good Condition
Photo	See Photo
Siemens 840C Spindle dia 203 mm X - 10.000 mm Y - 5.000 mm

72

ID	MA31377
Make	TOS
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

73

ID	MA31172
Make	Skoda Czech
Model	W200H
YOM	1980
Condition	Good Condition
Photo	See Photo
cone metric 120 X-Y-Z-W 4000/3150/2000/1600 мм Skoda E20 ser #22129 (2000X2000) - 1980 Yom ( 9350kg) 3 milling head 2 floor plates 3000X1500X300 mm ( approx 7 t )

74

ID	MI6974
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Floor Boring (morton) x:4000 mm ,y: 2300 mm, z:1500 mm

75

ID	MA31017
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
USED UNION BFP 130/5 -FLOOR TYPE BORING MACHINE WITH ROTARY TABLE 2000x1800mm, FLOOR PLATES 3500x1750x350mm/ 6 Pcs., CORSE : X=7000mm Y=2500mm

76

ID	MI6899
Make	Skoda Czech
Model
YOM
Condition
Photo	See Photo
a)Longitudinal TravelZ: 3500 mm b)Cross Travel X: 2000 mm c)Height Y: 1800 mm d)Spindle dia: 150 mm e)Spindle Travel: 1250 mm

77

ID	MA30565
Make	Innocenti
Model	CWB200
YOM	Rebuilt with CNC 1996
Condition	Good Condition
Photo	See Photo
Spindle diameter 200 mm Cross travel (X) 12400 mm Vertical travel (Y) 4800 mm Ram movement (Z) 0-890 mm Spindle movement (w) 2000 mm Spindle taper ISO 60 Spindle speeds 1,8-445 rpm Ram Size 1230x830 mm Control System Siemens 840C X-Y-Z-W axis Accessories: Floor Plates 15500-6400 mm Rotary Table 2280x2280 mm Table load 20000 kg Arbor support Boring bars 3 pc(s) Angles Plane 4 pc. 4m - 4 small Vertical Heads - Supports and more Weight 350 ton

78

ID	MA30418
Make	Skoda Czech
Model	W250HC
YOM	1989
Condition	Good working condition
Photo	See Photo
Spindle diameter : 250 mm, X-travel : 5000 mm (possible extension � 20 000 mm), Y-travel : 4000 mm, Spindle movement : 2000 mm, Sleeve movement : 1600 mm, Spindle speed : 0,8 - 800, Feed column (X-axis) : 0,63 - 6000 mm/min. Spindle drive : 77 kW, Max. torque on the spindle : 35000 Nm, Machine dimensions : 14300 x 6400 x 9320 mm, Machine weight : 105,400 kg.

79

ID	MA30166
Make	Russian
Model	2A656F11
YOM	1985
Condition	Good Condition
Photo	See Photo
Spindle diameter : 160 mm, Tool spindle taper : M80, The spindle rotation frequency : 7,5-950 rpm, The dimensions of the working surface of the longitudinally-movable, Rotary table : 2500 x 2000 mm, Load capacity : 16000 KG, The dimensions of the working surface of the plate mm, width : 4500, length at X=3150 4200, length at X=6150 6300, length at X=9150 10500, length at X=12150 14700, The greatest movement of mobile nodes, mm stand(X-axis) : 3150 mm, table longitudinal(W-axis) : 1000 mm, rotation axis(b) of the table, ang.grad 360, head stock (Y-axis), mm 2000, spindle (Z axis) mm 1250, Working feed, mm/min, in the X, Y, Z 2,5-2000, W-axis 2-2000, Rapid travel speed mm/min, on the X-axis 5000, Y, Z 4000, W-axis 3150, Power : 18,5 kW, Dimensions : 11500 x 8100 x 5650 mm, Weight : 54000 KG.

80

ID	MI6655
Make	Morton
Model
YOM
Condition	Good Condition
Photo	See Photo
Travel X-4000 mm, Y-2000, Z-1500 mm ram type. VFD and induction motors for spindle and feed make siemens. feed through lead screw. angular head and tooling available.

81

ID	MA30099
Make	Kuraki,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 130 mm, Stroke X : 10000 mm and Y : 2300 mm, Rotary table : 2700 mm x 1800 mm, Angle plate available, Floor plate : 3000 mm x 2000 mm, DRO & Counter.

82

ID	MA30082
Make	Juaristi
Model	MDR130CM
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 130 mm, X : 5000 mm, Y : 2500 mm, Rotary table : 2500 x 2000 mm. 20 tons. 3 Floor plates 5000 x 1500 mm, Universal Head, Spindle support, DRO.

83

ID	MA29940
Make	Shibaura
Model	BF13A
YOM	1990
Condition	Good Condition
Photo	See Photo
Spindle diameter: 130 mm, X axis: 8900 mm, Y axis: 2500 mm, Z axis: 700 mm, Rotary table: 2000 x 1600 mm, Spindle speed:800 rpm, Accessories Digital read out, Angle plate, Floor plate, Tools, Chip conveyor

84

ID	MA29938
Make	SNK
Model	BF175
YOM	1971
Condition	Good Condition
Photo	See Photo
Spindle diameter: 175 mm, X axis: 9400 mm, Y axis: 4500 mm, Z axis: 750 mm, W axis: 1000 mm, Ram size: 6000 x 600 mm, Spindle taper: MT7, Spindle motor: 75 KW, Spindle speed: 600 rpm, Acessories: Digital read out, angle attachement, 2 x angle plate, Milling steady rest, Floor plate, Tools, Chip conveyor

85

ID	MA29936
Make	SNK
Model	BF175
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle diameter: 175 mm, X axis: 14000 mm, Y axis: 4500 mm, Z axis: 750 mm, W axis: 1000 mm, Ram size: 6000 x 600 mm, Spindle taper: MT7 Spindle motor: 75 KW, Spindle speed: 600 rpm, Rotary table: 3000 x 2200 mm/30 ton, Accessories Digital read out, Angle attachement 4 x angle plate, Floor plate, Tools Chip conveyor

86

ID	MA29760
Make	Stanko-Russia
Model	2B660
YOM
Condition	Good Condition
Photo	See Photo
X travel : 6000 mm, Y travel : 3000 mm, Max. processing internal diameter : 1800 mm, Max. longitudinal travel of ram-type spindle : 1600 mm, Max. longitudinal travel of head column : 600 mm, Radial motion of carriage, inbuilt in faceplate : 550 mm, Spindle diameter : 220 mm, Number of T slots : 27, Power of main motor : 55 kW, Distance between T-slots : 300 mm, Max. power usage : 110 kW, Machine Weight : 152 ton.

87

ID	MA29753
Make	Skoda Czech
Model	W200G
YOM	1986
Condition	Good Condition
Photo	See Photo
Spindle : 200 mm, Main spindle ball metrical : 120 mm, Column travel X : 8000 mm, Headstock vertical travel Y : 4000 mm, Spindle axial travel Z : 2000 mm, Ram travel W : 2000 mm, Rotary table : 2000 x 2000 mm, Max. workpiece weight : 40 t, on rotary table : 25 t, Feed, spindle : 1600 mm/min, Feed, vertical milling head : 3200 mm/min, Motors : 83; 7.2; 3.6 kW. Total 150 kW, 1,6- 630 rpm, 3 x Milling heads, Total Weight : 85 ton.

88

ID	MA29667
Make	Stanko-Russia
Model	NC212F2-11/05
YOM	1986
Condition	Good Condition
Photo	See Photo
Spindle dia: 220 mm, X travel: 12000 mm, Y travel: 3000 mm, Z travel:1000 mm, W travel:1800 mm

89

ID	MA29666
Make	Skoda Czech
Model	W200
YOM	1976
Condition	Good Condition
Photo	See Photo
Spindle dia: 200 mm, Travel: Horizontal: 4000 mm, Vertical: 3150 mm, z1 x 1600 z2 x 2000, Table: 2500 x 2000

90

ID	MA29637
Make	NZTSG Novosibirsk
Model	NC26
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 220 mm, Cone sliding spindle - metric 140, The limits of the sliding spindle speed: 2 � 510 ob / min, Maximum shifting rack X-axis: 9300 mm, The diameter of the face plate: 1150 mm, The cross section of the quill: 440 Х 480 mm, The greatest movement of the sliding spindle, Z-axi: 1800 mm, The largest longitudinal movement of the rack, W axis: 600 mm, The greatest movement of the spindle head, Y-axis: 3800 mm The largest longitudinal travel of table, W-axis: 2000 mm, Maximum weight of the work piece on the table: 50 000 kg, Machine dimensions: 13910Х 11500Х 8620 mm (L x W x H) Machine weight 200 kg ..... 140 The machine is designed to perform the following operations: � Drilling; � Boring; � Centering and reaming holes; � Tapping; � Boring holes and deployment; � Volume milling, contour milling of planes; � milling of planes, grooves, ledges; � Processingcases.

91

ID	MA29606
Make	Skoda Czech
Model	W200
YOM	1974
Condition	Good Condition
Photo	See Photo
Spindle dia : 200 mm, Travel X axis : 4000 mm, Travel Y axis : 3150 mm.

92

ID	MA29594
Make	Russian
Model	2B660F1
YOM	1976
Condition	Good Condition
Photo	See Photo
Spindle dia : 220 mm, X travel : 6000 mm, Y travel : 3000 mm, Working area : 5000 x 8100 mm, No Rotary Table, Weight : 142 ton.

93

ID	MA29593
Make	NZGST; Novosibirsk; Russia
Model	2B660
YOM
Condition	excellent working condition
Photo	See Photo
Diameter of ram-type spindle : 220 mm, Faceplate diameter : 1150 mm, Max. processing internal diameter : 1800 mm, Max. longitudinal travel of ram-type spindle : 1600 mm, Max. cross traverse movement of head column : 6000 mm, Max. longitudinal travel of head column : 600 mm, Max. vertical longitudinal movement of spindle head : 3000 mm, radial motion of carriage, inbuilt in faceplate : 550 mm, range of spindle rotational speed : 1-510 rpm, range of faceplate rotational speed : 1-135 rpm, Feed-rate range of head column, along: - main: 1 + 400 mm/min, - additional: 0,2 + 1 mm/min, Rapid motion of head column, along : 400 mm/min, Feed-rate range of head column, crosswise: - main: 3 + 2500 mm/min, - additional: 1,25 + 3 mm/min, Rapid motion of head column, crosswise : 2500 mm/min, Feed-rate range of spindle head : - main: 3 + 2500 mm/min, - additional: 1,25 + 3 mm/min, Feed-rate range of spindle : - main: 1 + 1250 mm/min, - additional: 0,62 + 1 mm/min, Feed-rate range of facing slide : - main: 1 + 400 mm/min, - additional: 0, 2 + 1 mm/min, Rapid motion of spindle head : 2500 mm/min, Rapid motion of spindle : 2500 mm/min, Max. vertical longitudinal movement of work rest device of end support bearing : 3000 mm, Internal diameter in the work rest device of end support bearing : 300 mm, Min distance between center line of spindle to the surface of bed plate : 800 mm, Max. torsional moment on spindle : 1000 kgsm (kilogauss), Max. torsional moment on faceplate : 2600 kgsm, Max. feed thrust of spindle : 5000 kgs, Max. feed thrust of column : - along: 4000 kgs, - crosswise: 2000 kgs, Max. feed thrust of spindle head : 2000 kgs, Max. feed thrust of facing slide : 500 kgs, Dimensions of end support bearing : length: 4200 mm; width: 1250 mm; height: 4570 mm, Weight of bed plate : 34500 kg, Weight of machine : 152 000 kg.

94

ID	MI6520
Make	Schiess,German
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 200 mm, Travel :- X-8 mtrs,Y - 3 mtrs. & Z - 2mtrs.(spindle front & back movement) Ram - 1mtrs (front & back), Power-70 KW, Wt:-100 tonnes.Rpm - min. 5rpm. Max - 700 rpm. Floor plate sizes- 4mtr X 2 mtr- 1no,3 mtr X 2mtr - 1no, 1mtr X 2mtr - 1no.

95

ID	MA29413
Make	WMW Union ,Germany
Model	BFP125/III
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 125 mm

96

ID	MA29412
Make	WMW Union ,Germany
Model	BFP125/III
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 125 mm

97

ID	MA29208
Make	WMW Union ,Germany
Model	BFP160/1
YOM	1969
Condition	Good Condition
Photo	See Photo
Spindle diameter : 160 mm, X travel : 3000 mm, Y travel : 1800 mm, Z travel : 800 mm, Table IIC-2 (ZSRR), (2250 X 1800) mm, Floor plates : 4000 x 3500 mm, Machine Weight : 40,000 Kg.

98

ID	MA29104
Make	Russian
Model
YOM	New in 1980
Condition	Good working condition
Photo	See Photo
Spindle dia: 160 mm, Rotary table: 2500 x 2200 mm, X travel: 6000 mm, Y travel: 2800 mm,

99

ID	MA28880
Make	Russian
Model
YOM	1967
Condition	Good Condition
Photo	See Photo
2 columns. Spindle : 220 mm, X=19300 mm, Y=3800 mm, Rotary table 50t, 3600 x 3600 mm,

100

ID	MA28837
Make	WMW Union ,Germany
Model	BFP125
YOM
Condition	Very good condition
Photo	See Photo
Spindle dia: 125 mm, X travel:5000 mm, With plates:1500 x 8000 mm, With digtial display, With wohlhaupter, Morse:6

101

ID	MA28614
Make	Schiess,German
Model	FB22/13
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm, Dia of the front milling spindle: 220 mm, Dia of milling spindle sleeve: 360 mm, Total drilling depth: 1750 mm, Vertical movement of spindle box: 3000 mm, Cross movement of column: 5000 mm, Table: 2500 x 2500 mm, 5 pcs of floor plates: 2040 x 4900 x 380 mm, Facing plates, Angle plates and lots of accessories.

102

ID	MA28512
Make	Skoda Czech
Model	W200H
YOM	1983
Condition	Good Condition
Photo	See Photo
Diameter of working spindle : 200 mm, Travel X-axis : 4000 mm, Motion of work head on frame (Y) : 3150 mm, Slip out of working spindle (W) : 2000 mm, Quill travel : 1600 mm, Load capacity : 25000 kg. Rotary table : (1990) Table E 25, Table load : 25 tons. Rotary table : 2000 x 2000 mm, Milling head IFW 2 + IFW3.

103

ID	MA28250
Make	Scharmann
Model	WF135/225
YOM	1961
Condition	Very good condition
Photo	See Photo
Spindle dia: 240/155 mm conus MC8, X : 10200 mm, Y: 2500 mm, Spindle Z: 600 mm plus 600 mm, Square head Sk50/Z max: 1250 m/Max 300 rpm, 37 KW, Max. spindle: 700 rpm, ROD With big price drop

104

ID	MA28100
Make	WMW Union ,Germany
Model	BFP130/5
YOM	1979
Condition	Good Condition
Photo	See Photo
Spindle diameter: 130 mm, Cross travel column (X): 6000 mm, Vertical travel head stock (Y): 2500 mm, Spindle travel : 1000 mm, Main motor power: 22 KW, Machine weight: 55 ton, Rotary table: 1800 x 2000 mm, With 2 No Milling Head, Without floor plates, Total Weight : 45 Tons (including Rotary Table).

top