VKengg.co.in

Category : Boring Mills

Sub-Category : Borer Horizontal Ram Type

Total Machines Found : 40

Select	| Machine Details
1	ID MA35640 Make Skoda Czech Model WD160B YOM Condition Good Condition Photo See Photo FEATURES: 2845 MM COMBINED RAM & SPINDLE TRAVEL/REACH UNIVERSAL ANGLE HEAD DIGITAL READOUTS SPECIFICATIONS: SPINDLE DIAMETER:160 MM VERTICAL HEAD TRAVEL, Y-AXIS:2500 MM COLUMN TRAVEL, X-AXIS:5000 MM SPINDLE TRAVEL, Z-AXIS:1600 MM RAM TRAVEL, Z-2 AXIS :1250 MM RAM & SPINDLE TRAVEL, COMBINED:2850 MM RAM CROSS SECTION 450 MM X 450 MM RAPID TRAVERSE, STEPLESS,SPINDLE,RAM:0 TO 62.99 IPM RAPID TRAVERSE, HEADSTOCK ON COLUMN:125.98 IPM MILLING FEEDS, HEADSTOCK & COLUMN 0.0393 TO 125.98 IPM SPINDLE SPEEDS: 4-RANGES 2-800 RPM SPINDLE TAPER #50 RAPID TRAVERSE: 126 IPM FLOOR SPACE, HEIGHT 6395 MM EQUIPPED WITH: FULL PENDANT CONTROLS DIGITAL READOUTS UNIVERSAL ANGLE HEAD POWER DRAW BAR WAY COVERS ON X AXES CHIP CONVEYOR WORK LIGHT 50 HP SPINDLE DRIVE 440/3/60 NOTE: ROTARY TABLE AND FLOOR PLATES NOT INCLUDED
2	ID MA34917 Make Skoda Czech Model W250G YOM Condition Good Condition Photo See Photo The movement of the rack along the bed is – Х=5000 mm. Moving the spindle head on the rack – Y=4150 mm. The maximum spindle boring depth is 2000 mm. The maximum extension of the quill is 1600 mm. Table E20 2000х2000 мм
3	ID MA34030 Make Skoda Czech Model WD160 YOM Condition Good Condition Photo See Photo x - 3800mm, - y - 2400mm, - Work spindle diameter 160 mm - Taper metric 100 - Dimensions 450x450 mm rectangular sleeve, - Maximum depth of boring spindle 1600 mm, - Max pull-out sleeve 1250 mm, - Vertical movement of spindle head 2500 mm - The movement of the rack bed 3150 mm, - Lateral movement of table 3000 mm, - Clamping table area 1600x3150 mm, - Dimensions of base mounting plate 5600x3775 mm - Variable spindle speeds 2-800 rpm - 1,6-1600 feeds mm / min - Rapid movement 1600 mm / min - The spindle motor 35 kW, - Machine dimensions without the plate (Lx W x H) 7180x6300x6480 mm - Machine weight 37000 kg,
4	ID MA33884 Make Skoda Czech Model W200HC YOM 1991 Condition Good Condition Photo See Photo spindle diameter 200 mm x-travel 10000 mm y-travel 3000 mm ram stroke 1600 mm dimension of the ram 520 x 520 mm tool adaptor ISO 60 bore spindle stroke 2000 mm bore spindle turning speed range 1,6 - 630 U/min spindle motor 83 kW bore feed range 0,63 - 2500 mm/U milling feed range 0,63 - 5000 mm/min electrics - voltage/frequency 380/50 V/Hz total power requirement 85 kW weight of the machine ca. 86 t dimensions of the machine ca. 13,8 x 6 x 8,3 m
5	ID MA33835 Make Skoda Czech Model W200H YOM 1982 Condition Good Condition Photo See Photo Spindle dia: 200 mm X-4000,Y-2500,Z-2000,W-1600 SKODA ROTARY TABLE 2000X 2000 mm
6	ID MA32918 Make SKODA Model WD160 YOM 1974/2002 Condition Good Condition Photo See Photo X, Y, Z = 7,000, 3,150, 1,600 mm Turntable: 3,150 x 3,000 mm Fixed table: 5,500 x 5,500 mm Control: SIEMENS 840 D
7	ID MA32451 Make Skoda Czech Model W160 YOM Condition Good Condition Photo See Photo Spindle dia; 160 mm
8	ID MA32449 Make Skoda Czech Model WD200A YOM 1966 Condition Good Condition Photo See Photo Spindle dia : 200 mm
9	ID MA32399 Make Toshiba Japan Model BSF150A YOM 1990 Condition Good Condition Photo See Photo X: 10.5 mm, Y: 3.5 mm, V: 3.0 mm, Z: 750 mm, W: 900 mm, Rotary table: 360 degree, ATC: 90 Table: 3200 x 2500 mm, Rotary table: 3200 x 2400 mm Subject to the bid win
10	ID MA31942 Make Skoda Czech Model W200 YOM Condition Good Condition Photo See Photo Spindle diameter: 200 mm, Spindle nose: ISO 60, Horizontal feed of colimn X: 14500 mm, Vertical feed head stock Y: 3750 mm, Ram extension Z: 1600 mm, Max. work piece weight: 40 ton, Table size: 4000 x 3500 mm, Dimensions: 18000 x 5000 x 7000 mm, Total weight: 125 ton.
11	ID MA31648 Make SKODA Model W160HA YOM 1987 Condition Good Condition Photo See Photo X-6 000mm, Y-ca2 500, Rotary table E25 / 2 x 2 m payload 25 tons Weight-20 Ton floor plates,(2pc. 2x6500x1870), 4 pc of milling Heads. Rotary table skoda type E25 Rotary table size: 2000 x 2000 Weighs capacity: 20 t
12	ID MA31647 Make SKODA Model W160HC YOM 1990 Condition Good Condition Photo See Photo X-4 000mm, Y-ca3 000, rotary table S35, Size- 3150x 2500mm, Weight- 40 Ton 4 pc of milling Heads Rotary Table Skoda type S35 Size: 3150 x 2800, Rotary table weighs capacity: 40 ton.
13	ID MA31609 Make SKODA Model W160 YOM 1975 Condition Good Condition Photo See Photo Spindle dia: 160 mm, X travel: 4000 mm, Y travel: 2500 mm, Z travel: 1600 mm, W travel: 1250 mm, Weight: 69000 kg
14	ID MA31143 Make Innocenti Model YOM 1970 Condition Good Condition Photo See Photo spindle : 200mm , Taper ISO 50 or 60 ? x- 16000 mm y-4000 mm 3 pcs floor plate aprox. 6000x2700mm /each - With milling head -2 x, Facing chuck. without rotary table
15	ID MA30120 Make Skoda Czech Model W200HA YOM 1985 Condition Good Condition Photo See Photo Spindle dia: 200 mm, XYZW: 1000-3150-1600-2000 mm, machine no included floor plates ? rotary table - electric cabinet - for full modernization
16	ID MA30119 Make Skoda Czech Model W250H YOM 1982 Condition Good Condition Photo See Photo Workspindle dia :250 mm Column cross travel X :12000 mm Headstock vertical travel Y:4150 mm Ram travel Z :2000 mm Spindle stroke W :1600 mm
17	ID MA30080 Make Skoda Czech Model WD160A YOM Condition Good Condition Photo See Photo Spindle diameter 160 mm Spindle speed 2-800 rpm Taper MK 100 Spindle travel 1 600 mm Ram travel 1 250 mm Headstock travel 2 500 mm Column Travel 3 150 mm Max.power 35 kW Control system conventional Machine weight 42 t Accessories turntable E 20, Maximum Load 20 t Clamping area 2 000 x 2 000 mm Turntable travel 1 200 mm Table weight: 10 t
18	ID MA30078 Make Skoda Czech Model WD160A YOM 1962 Condition Good Condition Photo See Photo Spindle diameter: 160 mm, Spindle speed: 2-800 rpm, Taper MK: 100 Spindle travel:1600 mm Ram travel:1 250 mm Head stock travel:2 500 mm Column Travel:3 150 mm Max.power:35 kW Control system conventional Machine weight:42 t Accessories turntable ISO 16, Maximum Load:16 t Clamping area:2 200 x 2 200 mm Turntable travel:1 500 mm Table weight:11 t
19	ID MA29527 Make Skoda Czech Model WD130B YOM 1979 Condition Good Condition Photo See Photo Spindle dia: 130 mm, Taper in spindle ISO 50, X travel: 4800 mm, Y travel: 2300 mm, Z travel: 1120 mm, w travel: 450 mm
20	ID MA29388 Make Skoda Czech Model W160 YOM 1969 Condition working condition ,under power Photo See Photo Spindle: 160 mm, X travel: 3000 mm, Y travel: 2500 mm, W travel: 1250 mm, Z travel: 1600 mm, Ram size: 450 x 450 mm.
21	ID MA29303 Make Skoda Czech Model W250H YOM 1982 Condition Good Condition Photo See Photo Spindle: 250 mm, X/Y/Z/W: 4000/4150/2000/1600 mm, Equipped with Universal head: 1 unit, Angle head: 1 unit, Floor plate: 2800 x 2000 x 400 mm - 5 units, Weight: 105.3 ton
22	ID MA28964 Make Skoda Czech Model W250H YOM Condition Good Condition Photo See Photo Spindle diameter : 250 mm, Progress on the axes X 20000 mm (a standard in Odessa as stated above) Y 4150 mm Z 2000 mm W 1600 mm Maximum torque on the spindle axis : 34,300 N/M, Machine dimensions : 14300 h6400 h9320, Machine Weight : 115,300 kg. Rotary table :- Model : S80, Size : 4100*3100.
23	ID MA28778 Make Skoda Czech Model W160H YOM Condition Good Condition Photo See Photo Diameter of working spindle : 160 mm, Travel X-axis : 3000 mm, Travel Y-axis : 2500 mm, Clamping area of table : 2000 x 2000 mm, Table E 20.
24	ID MA28675 Make Skoda Czech Model W200H YOM 1981 Condition Good Condition Photo See Photo Spindle diameter : 200 mm, Spindle cone : 120 metric, Max. spindle axis torque : 34300 Nm, Frame height : 550 mm, Slides width : 2000 mm, Table size : 2000 x 2000 mm, Max. table load : 25000 kg, Quill dimensions : 450 x 450 mm, Spindle travel (Z) (boring depth) : 2000 mm, Quill travel (W) : 1600 mm, Spindle head movement (Y) : 3150 mm, Column movement (X) : 10000 mm, Spindle turning speed range : 0,8.630 rpm, Boring spindle feeds : 0,63.125 / 6,3.1250 / 12,5.2500 mm/min, Milling head motor capacity : 77 kW, Total power required : 180 kW, Machine dimensions : 5900 x 13800 x 8270 mm, Machine weight : 84000 kg. With Rotary Table : 2000 x 2000 mm, Milling heads, Tail-stock, Two T-slot floor plates : 4000 x 5000 mm. Machine can bore : 5000 mm, Depth. It is with ball screws.
25	ID MA28653 Make Skoda Czech Model W160G YOM 1980 Condition Good working condition Photo See Photo Spindle diameter : 160 mm, X Travel : 3000 mm, Y Travel : 2500 mm, Rotary Table : 20000 x 2000 mm.
26	ID MA28589 Make Skoda Czech Model W250 YOM 1974 Overhauled 2008 Condition Good Condition Photo See Photo Spindle diameter: 250 mm, Spindle taper: 60 ISO, Max. spindle axis torque: 34300 Nm, Frame height: 600 mm, Slides width in the frame: 2500 mm, Spindle speed range: 0,8.630 rpm, Column movement (X): 20000 mm, Spindle head movement (Y): 4150 mm, Spindle travel (Z) (boring depth): 2000 mm, Quill travel (W): 1600 mm, Min. spindle height above frame: 1475 mm, Spindle, quill feed range: 0,63.2500 mm/min, Spindle head feed range: 0,63.4000 mm/min, Column feed range: 0,63.5000 mm/min, Rotary table size: 2000 x 2000 mm, Spindle motor capacity: 77 kW Total power required: 180 kW, Machine dimensions: 14300 x 6400 x 9320 mm, Machine weight: 115300 kg.
27	ID MA28565 Make Skoda Czech Model W160G YOM 1976/1980/1985 Condition very good technical condition Photo See Photo Spindle diameter: 160 mm, X axis: 3900 mm, Y axis: 3150 mm, Z axis: 1300 mm, Spindle taper: ISO 50 (hydraulic) Maximum torque on the axis: 24500 Nm, Rotary table E20: 2000 x 2000 mm, 2 floor plates,each: 6000 x 1880 mm, Machine weight: 69,000 kg,
28	ID MA28524 Make Skoda Czech Model W200HA YOM Condition Good Condition Photo See Photo Spindle dia: 200 mm, ISO 60, Ball Screw, X travel: 5000 mm, Y travel: 3150 mm, 3 milling head Rotary table Skoda: 3000 x 400 mm.
29	ID MA28501 Make Skoda Czech Model WD160 YOM 1968 Condition Good Condition Photo See Photo Spindle diameter : 160 mm, Travel X axis : 3150 mm, Travel Y axis : 2500 mm, Spindle Z axis : 1600 mm, W axis : 1250 mm, Spindle Taper : 100 mm, Floor plate : 2100 x 4500 - 1 piecese, Spindle speed : 2-800 rpm, Motor Power : 9,8-35,5 Kw, Dimensions : 10000 x 5250 x 6365 mm, Machine Weight : 42000 Kg.
30	ID MA28491 Make Skoda Czech Model W250H YOM 1982/Dismatled in 2015 Condition Good Condition Photo See Photo Spindle dia: 250 mm, X travel: 4000 mm (8 meter length one frame), Y travel: 4150 mm, Z: 2000 mm, W: 1600 mm, Floor plates: 2800 x 2000 x 400 mm 5 pic, With chip conveyor, With universal head, With angular head, Worked 20,000 hours
31	ID MA28473 Make Skoda Czech Model WDA200 YOM General Overhaul 1992 Condition Good Condition Photo See Photo Spindle dia: 200 mm, X travel:4000 mm, Motion of work head on frame (Y): 3000 mm, Slip of working spindle (W): 2000 mm, Quill travel: 1600 mm, Clamping area of table; 2000 x 2000 mm, Load capacity:20000 kg, Accessories: Table E20: 2000 x 2000 mm, Capacity: 20 ton, Milling head IFW2, IFW3, Drive ward leonard.
32	ID MA28417 Make Skoda Czech Model W160 YOM 1970 Condition Good Condition Photo See Photo Spindle dia: 160 mm, X travel: 3000 mm, Y travel: 2500 mm, Rotary table: E20: 2000 x 2000 mm, Floor plate: 1900 x 4000 - 2 piecese, With change head
33	ID MA28358 Make Skoda Czech Model WD160 YOM 1976 Condition Excellent Photo See Photo Spindle diameter : 160 mm, X-travel : 7000 mm, Y-travel (Vertical) : 2500 mm, W-axis (spindle longitudinal) : 1600 mm, Max Ram pull out : 1200 mm, Ram Size : 450 x 450 mm, Spindle taper (option for ISO 50 sleeve) : metric 100, Variable spindle speed : 2 - 800 rpm, Rapid movement : 1600 mm / min, The spindle motor : 35 kW, Machine size : 7180 x 6300 x 6480 mm, Weight of the bare machine : 37000 kg, Rotary table Skoda type E20. Rotary Table size : 2000 x 2000 mm, Rotary table weight capacity : 20 tone, Rotary table travel : 1200 mm, Rotary table weight : 9750 kg, Floor plates size ( x 4 pcs) : 5000 x 2000 mm (each), Floor plate weight (each) ca. : 8 tone, Angular milling head. Complete with all accessories :- With complete documentation. Travel can be extended by addition of extension guides.
34	ID MA28339 Make Skoda Czech Model W200 YOM Condition Disassembled Photo See Photo Spindle dia: 200 mm, X travel: 8000 mm, Y travel: 4150 mm, Ram stroke: 1600 mm, Spindle stroke: 2000 mm, Floor plates: 6000 x 2000 mm, Motor : 75 kw, Spindle speed: 960 rpm.
35	ID MA28325 Make Skoda Czech Model W160 YOM 1982 Condition Good Condition Photo See Photo Spindle dia: 160 mm, X travel: 3000 mm, Y travel: 2500 mm, Z travel: 1600 mm, Motor power: 110 kw, Rotary table: 2000 x 2000 mm (E20), With milling head, With floor plates : 2 nos, With tails tools
36	ID MA28283 Make Skoda Czech Model W160H YOM 1981 Condition Good Condition Photo See Photo Spindle diameter : 160 mm, Travel X : 9500 mm, Travel Y : 3150 mm, Travel Z (ram) : 1250 mm, Travel W (spindle) : 1600 mm, Spindle taper : ISO 50 Floor plate : 5620 x 1880 x 400 mm (2 piece), Rotary Table : 2000 X 2000 mm, Weight total aprox : 70 tons. Accessiories With vertical milling head, With rotary table E20 of 1981 (2000 x 2000 mm)
37	ID MA28247 Make Skoda Czech Model W160 YOM 1970 Condition Good Condition Photo See Photo Spindle dia: 160 mm, X travel: 6000 mm, Y travel: 2500 mm, Rotary table E 20 (2000 x 2000), No Floor Plates.
38	ID MA28243 Make Skoda Czech Model W200G YOM 1979 Condition Good Condition Photo See Photo Spindle dia: 200 mm, X travel: 8000 mm, Y travel: 4150 mm, Z travel: 1600 mm, W travel: 2000 mm, Spindle taper: ISO 60, Spindle speed: 630 rpm, Accessories: rotary table : E20, 4 Floor plates: 5600 x 1880 x 400 mm each, Milling head IFH1 and IEW 3, Counter steady Skoda IOT 4150, Chip conveyor
39	ID MA28241 Make Skoda Czech Model W160H YOM Condition Very good condition Photo See Photo Spindle diameter: 160 mm, Spindle taper: ISO 50, Ram size: 450 x 450 mm, Longitudinal travel (on bed) X: 7000 mm, Head stock travel on column Y: 3150 mm, Max. depth of boring by spindle: 1600 mm, Ram travel: 1250 mm, Main spindle speed: 2-800 rpm, Spindle torque on spindle: 25000 Nm, Main motor power: 55 kW, Machine is equipped with DRO philips, Accessories: Rotary table skoda E20 size 2000 x 2000 mm, load - 20 ton, 1 x floor plates dimensions 6400 x 1885 mm, With 1 Milling Head, With Chip Conveyor.
40	ID MA28136 Make Skoda Czech Model W160HA YOM 1986 Condition Good Condition Photo See Photo Spindle diameter: 160 mm, Travel X axis: 4000 mm, Travel Y axis: 3000 mm, Travel Z axis: 1600 mm, Travel W axis: 1200 mm, Spindle cone: ISO 60, Table size: 2000 x 2000 mm, Quill dimensions: 450 x 450 mm, Spindle turning speed range: 1.1000 rpm, Milling head motor capacity: 55 kW, Total power required: 140 kW, Floor Plates: 4500 x 2000 mm (2 assembly plates). Total Weight : 100 Tons.