V. K. Engineering - Buying & Selling of Machines made easy

Category : Boring Mills

Sub-Category : Borer Horizontal Table Type

Total Machines Found : 471

Select

| Machine Details

ID	MI8220
Make	WMW
Model	80
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia; 80 mm, Diameter of faceplate: 500 mm, Surface area of table: 900 x 1120 mm, Table rotation: 360 degree, X travel: 1100 mm, Y travel: 1000 mm, Z axis: 630 mm, Stroke of bore spindle: 710 mm, Dimension (L x B x H): 5.4 x 2.5 x 2.6 mm, Weight: 7 ton

ID	MI8219
Make	WMW Union ,Germany
Model	BFT63
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 63 mm, Table: 1055 x 855 mm, Cross travel: 800 mm, Vertical travel; 700 mm, Indexing table:yes Tale stock: yes Digital readout: yes Hardened bed: yes Weight approx.: 4.5 ton

ID	MA35685
Make	Giddings & Lewis
Model	70A-DP4-T Fraser
YOM	1969
Condition	Good Condition
Photo	See Photo
able Size: 36" x 74" with (7) 13/16" Tee Slots & (3) 3/4" Key Slots Table Travel: Approx. 72" Saddle Travel: Approx. 60" Head Vertical Travel: 55" Spindle Travel: 28" Spindle Speeds: 10 to 1300 RPM Spindle Taper: #50 with Power Draw Bolt Spindle Feeds: .002 to .250 TPR Milling Feeds: .040 to 120 IPM Pendant Control (2) Floor Mounted Table Outrigger Supports: 111" L x 14" W x 8-1/2" H Hard Bed & Table Ways Soft Vertical Ways 20 HP Main Motor, 3 Phase, 50 Cycle, 440 Volts 1-1/2 HP Hydraulic Pump Motor, 3 Phase, 50 Cycle, 440 Volts Overall Machine Size: 200" Long x 88" Wide (Table & Saddle Removed) 127" Wide (Fully Assembled) x 128" High Electrical Cabinet: 44" Long x 15" Wide x 75" High Total Machine Weight: 23,500 Lbs.

ID	MI8187
Make	WMW Union ,Germany
Model	BFT80/2
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 80 mm, X travel : 1400 mm, Y travel : 1250 mm, Table size : 1400 x 1200 mm, DRO Is available

ID	MA35658
Make	Kuraki,Japan
Model	KBT1003W
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: PENDANT CONTROLS HEIDENHAIN DIGITAL READOUT SYSTEM BUILT-IN ROTARY TABLE CAPACITY: SPINDLE DIAMETER - 102 MM TAPER IN SPINDLE - #50 VERTICAL HEAD TRAVEL, Y-AXIS - 1250 MM TABLE CROSS TRAVEL, X-AXIS - 1500 MM SADDLE TRAVEL, W-AXIS - 1199 MM SPINDLE TRAVEL, Z-AXIS - 701 MM SPINDLE SPEEDS - 17-1200 RPM SPINDLE SPEEDS - 16 SPINDLE MOTOR - 15 HP TABLE SIZE, BUILT IN ROTARY - 1050 MM X 1200 MM TABLE CAPACITY - 8,800 LBS APPROXIMATE FLOOR SPACE - 5283 MM X 3556 MM APPROXIMATE HEIGHT - 3145 MM APPROXIMATE WEIGHT - 36,300 LBS EQUIPPED WITH: PENDANT CONTROL 1041 MM X 1194 MM BUILT-IN ROTARY TABLE HEIDENHAIN DIGITAL READOUT SYSTEM HARDENED WAYS POWER DRAW BAR TELESCOPING STEEL WAY COVERS 15 HP SPINDLE MOTOR

ID	MA35655
Make	TOS
Model	WHN13
YOM	1982
Condition	Good Condition
Photo	See Photo
FEATURES: FANUC 32I CNC CONTROL - RETROFIT 2016 1800 MM X 1600 MM B-AXIS ROTARY TABLE HARDENED WAYS & STEEL SLIDING WAY COVERS 50 HP SPINDLE DRIVE CAPACITY: SPINDLE DIAMETER - 130 MM VERTICAL HEAD TRAVEL, Y-AXIS - 2362 MM TABLE TRAVEL, X-AXIS - 3500 MM SPINDLE TRAVEL, W-AXIS - 803 MM COLUMN TRAVEL, Z-AXIS - 1256 MM TABLE SIZE (BUILT IN ROTARY) - 1800 MM X 1600 MM TABLE INDEXING - .001 DEGREES SPINDLE SPEEDS: - 5-1600 RPM SPINDLE TAPER - #50 TABLE WEIGHT CAPACITY - 26,400 LBS EQUIPPED WITH: FANUC 32I CNC CONTROL 1800 MM X 2200 MM BUILT IN B-AXIS ROTARY TABLE HARDENED WAYS & STEEL SLIDING WAY COVERS 50 HP SPINDLE DRIVE NOTE: UPDATED CONTROLS TO A FANUC 32I IN 2016 INSTALLED NEW FANUC SERVO MOTORS AND DRIVES IN 2016. SPINDLE WAS REGROUND TO TRUE NEW BALLSCREWS FROM BARNES BALL SCREW IN MADISON HEIGHTS, MICHIGAN IN 2016 LOCATION: VANCOUVER, BC CANADA MACHINE IS DISASSEMBLED. INCLUDES LOADING TO TRUCKS! MUST MOVE!

ID	MA35648
Make	Tos Czech
Model	WHN13.4
YOM	2008
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm, Control: HEIDEIHAN 530

ID	MA35647
Make	Juaristi
Model	MDR125CF
YOM
Condition	Good Condition
Photo	See Photo \| See Video
SPINDLE DIAMETER: 125 MM. TAPER: ISO 50 24 SPEEDS: 5 � 1000 RPM. MAX. BORING DIAMETER: 800 MM. ROTARY TABLE SURFACE: 1700 X 2000 MM. VERTICAL TRAVEL: 3.000 MM. LONGITUDINAL TRAVEL: 2.600 MM. CROSS TRAVEL: 3.000MM. MAXIMUN LOAD ON THE TABLE: 8.000 KGS. FEEDS 27 AUTOMATIC FFEDS: 0,025 � 10 MM./REV. FAST FEEDS: 2.500 MM./MIN. ROTATION OF THE TABLE: 0,8 RPM. MAIN MOTOR POWER: 25 CV. FAST FEEDS MOTOR POWER: 7,5 CV. MACHINE WEIGHT: 34 TONS. ACCESORIES: BALLSCREWS IN 3 AXIS DIGITAL IN 3 AXIS and also DRO in TABLE ROTATION FACING HEAD UNIVERSAL HEAD STEADY REST

ID	MI8159
Make	WMW
Model	BFT130/8
YOM
Condition	Good Condition
Photo	See Photo
SPINDAL SIZE : 130mm SPINDAL TAPPER : ISO 50 CROSS TRAVEL : 3000mm HEIGHT: 2000mm TABLE SIZE : 1800mm x 2000mm MACHINE IS WITH BALL SCREWS IN ALL AXIS

ID	MI8158
Make	Ceruti
Model	ADR130
YOM	1995
Condition	Good Condition
Photo	See Photo
Spindle Dia : 130 mm Spindle Taper : ISO-50 Cross Travel : 2500 mm Vertical Travel : 2000 mm Longitudinal Travel : 3000 mm Spindle Travel : 1200 mm Table Size : 1800 x 1500 mm Facing Chuck Hardened Guideways Rapid Rate : 2000 mm/min Feed Rate : 5-2000 mm/min Power : 15 KW Rotary Table Load Carrying Capacity : 10 Tons

ID	MI8124
Make	WMW Union
Model	BFT90/3
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Spindle dia - 100 mm Spindle Taper- ISO 50 Table clamping surface 1000 x 1100 mm X-Travel - 1100 mm Y-Travel - 1000 mm Z-Travel - 1850 mm

ID	MA35547
Make	Tos Czech
Model	WH80
YOM	1971
Condition	Good Condition
Photo	See Photo
Spindle diameter:80mm XYZ travel:1250x900x1250mm Spindle taper:5 Morse Table size:1090x1000mm Maximum diameter of the boring spindle:450mm Maximum depth of drilling:710mm Spindle stroke:900:mm Clamping table surface:1000x1000mm Spindle speeds(21):14-1400rpm Machine floor space 2400x4600mm Machine weight 10,000 kg

ID	MA35541
Make	TOS
Model	WHN13B
YOM	1985
Condition	Good Condition
Photo	See Photo
working spindle diameter : 130 mm spindle taper: ISO 50 table: 1800 x 1600 mm spindle speed: 12,5-800 rpm X: 2000 mm Y: 2000 mm Z: 1250 mm W: 800 mm DRO AXES READING SYSTEM 3 AXES

ID	MA35406
Make	WMW Union
Model	BFT90/3-1
YOM	1988
Condition	Good Condition
Photo	See Photo
Spindle diameter 90 mm Tool taper: ISO 50 DIN 2048 Spindle speeds range 8-1600 rpm Table dimensions 1000�1120 mm Table rotation 360 � Maximum table load 2500 kg Table cross travel (X) 1000 mm Table longitudinal travel (Z) 1600 mm Headstock vertical travel (Y) 1000 mm Spindle travel (W) 710 mm Feed (mm/U) 1-2500 Machine�s weight (t) 9,1

ID	MA35375
Make	WOTAN
Model	B130
YOM	1972
Condition	Good Condition
Photo	See Photo
SPINDLE DIAMETER ............. 5-1/8" SPINDLE TAPER ................ #50 SPINDLE QUILL TRAVEL ......... 40" SPINDLE SPEEDS ............... (21) 14 TO 1,000 RPM SPINDLE FEEDS ................ (27) .03 TO 12 mm/r ROTARY TABLE SIZE ............ 48" X 56" ROTARY TABLE T-SLOTTED ....... YES ROTARY TABLE ROTATION ........ POWERED 360 DEGREES ROTARY TABLE WEIGHT CAPACITY . 15,000 LBS VERTICAL HEAD TRAVEL ......... 48" TABLE CROSS TRAVEL ........... 72" LONGINTUDINAL SADDLE TRAVEL .. 77" RAPID TRAVERSE ............... YES, ALL DIRECTIONS BED OUTRIGGERS ............... YES PENDANT CONTROL .............. YES #5 MT SPINDLE ADAPTOR ........ YES MOTOR ........................ 20 HP

ID	MA35314
Make	Tos ,Varnsdorf
Model	W100A
YOM	1992
Condition	Good Condition
Photo	See Photo \| See Video
3-axis digital display � Head � Faceplate Technical details: Spindle diameter 100mm x-axis: 1500mm y-axis: 1250mm z-axis: 1800mm w-axis: 800mm Table size 1200x1200mm Speed 7.1-1120 rpm Weight 10000 kg

ID	MA35258
Make	Tos ,Varnsdorf
Model	W100
YOM	1980/In 2021 the machine was modernized
Condition	Good Condition
Photo	See Photo
Tailstock is available. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

ID	MA35255
Make	Tos ,Varnsdorf
Model	W100
YOM	1977
Condition	Good Condition
Photo	See Photo
Spindle size : 100 MM X-Axis : 1600 MM Y-Axis : 1120 MM Z-Axis : 1250 MM W-Axis : 900 MM table size : 1250 x 1250 MM max table load : 3 ton max facing diameter : 900 MM total power : 15 KW Dimension : 6020 x 3000 x 3500 weight : 16000 KG

ID	MA35253
Make	WMW Union
Model	BFT125/III
YOM
Condition	Good Condition
Photo	See Photo
DRO 3-axis Spindle diameter: 125 mm X-Travel table crosswise: 1600 mm Y-Travel headstock vertical: 2000 mm Z-Travel table length: 2000 mm W-travel (Spindle stock): 1200 mm Spindle speeds � infinitely 3,55-710 rpm Table 1800 x 2000 mm Table load 6,3 t B-axis 4 x 90 degr B-axis indexing accuracy + / � 2 sec Total power requirement 17 kW Machine weight about 25 t Space required approximately 7.4 x 5.9 x 4.5 m

ID	MA35243
Make	Toshiba Shibaura
Model	BP-13B-P7
YOM	1989
Condition	Good Condition
Photo	See Photo
Travels X-Axis 157" Y-Axis 80" Table Size: 160" x 60" Spindle Dia. 5.1" Spindle Speed 2500 RPM Taper #50 Equipped with: Fanuc 16iM Controls Power tool lock (retention knob) (2) Angle Plates Chiller unit Hard ways all axis Full length chip conveyor Spindle motor has been re-built Gear box has been re-built

ID	MA35237
Make	WMW Union ,Germany
Model	BFT125/III
YOM
Condition	Good Condition
Photo	See Photo
DRO 3-axis Spindle diameter: 125 mm X-Travel table crosswise: 1600 mm Y-Travel headstock vertical: 2000 mm Z-Travel table length: 2000 mm W-travel (Spindle stock): 1200 mm Spindle speeds � infinitely 3,55-710 rpm Table 1800 x 2000 mm Table load 6,3 t B-axis 4 x 90 degr B-axis indexing accuracy + / � 2 sec Total power requirement 17 kW Machine weight about 25 t Space required approximately 7.4 x 5.9 x 4.5 m

ID	MA35236
Make	Tos Czech
Model	WHN13.4A
YOM	1983
Condition	Good Condition
Photo	See Photo
DRO SYSTEM axes quote reader Spindle diameter 130 mm Spindle taper ISO 50 Rotary table 1800x1800 mm Cross Travel of table (X) 2000mm Headstock Vertical Movement (Y) 2000mm Column Travel (Z) 1250mm Spindle travel (W) 800 mm Max. table loading 12 tons Telescopic covers Spindle speed 12,5-800 rpm Machinery weight 36 tons Vertical milling head. no 2 prisms included

ID	MA35191
Make	TOS
Model	H100
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Tailstock, Faceplate, Corner are Available. spindle diameter :- 100 MM Table :- 1250 x 1250 MM cross travel :- 1450 MM longitudinal travel :- 2200 MM vertical travel :- 1250 MM

ID	MA35190
Make	TOS
Model	W9A
YOM	1982
Condition	Good Condition
Photo	See Photo
X travel :- 1250 MM Y travel :- 1120 MM Z travel :- 1400 MM Spindle Diameter :- 90 MM

ID	MA35041
Make	Nomura
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Spindle Size 3.35 X-Horiz Tvl of Table 40.0 Y-Vert Tvl of Head 40.0 Power 15.0 RPM 1200.0 SPINDLE DIAMETER ------------------------------ 3.35" TAPER IN SPINDLE -------------------------------- #50 SPINDLE OUT TRAVEL ----------------------------- 20" TABLE WORKING SURFACE ------------------------ 35.4" X 39.4" ( POWERED ROTARY TABLE ) CROSS TRAVEL OF TABLE -------------------------- 40" LONGITUDINAL TRAVEL OF TABLE ----------------- 24" VERTICAL HEAD TRAVEL ---------------------------- 40" RAPID TRAVERSE SPINDLE SPEEDS --- 21 TO 1200 RPM MAIN DRIVE MOTOR --------------------------------- 11 KW, 10 HP A.C. APPROXIMATE MACHINE WEIGHT ------------------ 19,800 LBS APPROXIMATE MACHINE DIMENSIONS ------------ 141"(LR) X 99"(FB) X 116"(H) Equipped With POWERED ROTARY TABLE 39" X 35.24" POWER DRAW BAR WITH #50 TAPER STEEL WAY COVERS PENDANT CONTROL

ID	MI7866
Make	WMW Union
Model
YOM
Condition	Good Condition
Photo	See Photo
90 spindle boring machine X - 1600mm Y - 1400mm Z - 1600mm No Tailstalk, No facing Chuck

ID	MI7865
Make	WOTAN
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle size 110 X - 2 metre Y - 1600mm Z - 1600mm No tailstalk, no facing chuck

ID	MA34971
Make	WMW Union ,Germany
Model	BFT125
YOM
Condition	Good Condition
Photo	See Photo
spindle diameter125mm x-travel2.000mm table size1.250 x 1.650mm table load6,5t digital taper ISOISO 50 weight of the machine ca.33t

ID	MA34898
Make	WMW Union ,Germany
Model	BFT90
YOM	1985
Condition	Good Condition
Photo	See Photo
Good condition , NOT REAR RACK.

ID	MA34828
Make	IVO Lola Ribar
Model	HBM5
YOM	1998
Condition	Good Condition
Photo	See Photo \| See Video
Features: Build-in Rotary table 4-Axis Heidenhain Digital Readouts Full pendant Control SPECIFICATIONS: Spindle diameter : 130 MM Spindle Taper : #50 Vertical head Travel, Y-Axis: 2000 MM Table Cross Travel, X-Axis :2200 MM Table Longitudinal Travel, W-Axis : 1600 MM Spindle Travel :898 MM Spindle speed : 2.5 -1000 RPM Spindle Motor : 20 HP / 20 KW Threading :2-96 TPI Table Size ( Build in Rotary ) : 2000 MM x 1800 MM Machine Foot Print :6096 x 5080 Machine Height : 4470 MM Machine Weight :50,820 LBS EQUIPPED WITH: Full Pendant Control Heidenhain 4-Axis Digital Readout System Build in Rotary table Threading Hardened ways Telescoping ways Covers

ID	MA34781
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Tailstock isn�t available. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

ID	MA34777
Make	Russian
Model	2622B
YOM	1969
Condition	Good Condition
Photo	See Photo
Spindle diameter - 110mm Table - 1120x1250mm Table capacity - 3000kg Dimensions - 5300x3400x1000mm Weight - 13200kg

ID	MA34713
Make	Tos ,Varnsdorf
Model	W75
YOM	1988
Condition	Good Condition
Photo	See Photo
main technical details are: main spindle diameter : 75 mm main spindle cone : ISO 40 main spindle speeds range: 18 - 1800 RPM table surface : 950 x 950 mm max. load on table : 3000 kg X travel : 1250 mm Y travel : 900 mm Z travel : 1000 mm W travel : 560 mm machine weight : 10700 kg The machine is in good working condition. Equipped with 3 axis SONY DRO

ID	MA34712
Make	Tos ,Varnsdorf
Model	WHN9B
YOM	1979
Condition	Good Condition
Photo	See Photo
main technical details are: main spindle diameter : 90 mm main spindle cone : ISO 40 table surface : 1000 x 1120 mm max. load on table : 3000 kg X travel : 1250 mm Y travel : 900 mm Z travel : 1000 mm W travel : 680 mm machine weight : 12000 kg

ID	MI7773
Make	Forges DeGilly,Belgium
Model	GB100
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 100mm Travel : 1200 X 1400 X 3100mm chuck : 670mm box table : 1300mm x 1100mm Rotery :360mm tilting Spindle Speed : 0-1200mm quill : 900mm spindle taper : 62mm Accessories : facing head

ID	MI7756
Make	WMW Union ,Germany
Model	BFT100/IV
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, DRO 3 axis

ID	MA34657
Make	Tos ,Varnsdorf
Model	WHN13.4
YOM	1983
Condition	Good Condition
Photo	See Photo
The machine is equipped with modern digital readout. X travel - 2000mm Y travel - 2000mm Z travel - 800mm Table - 1800x1600mm Spindle diameter - 130mm

ID	MI7713
Make	Tos ,Varnsdorf
Model	W9
YOM
Condition	Good Condition
Photo	See Photo
90 spindle 1100X1000 Table 2Axis DRO

ID	MA34548
Make	Tos Czech
Model	W100
YOM	1965
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

ID	MA34508
Make	Tos Czech
Model	WH80
YOM	1965
Condition	Very good condition
Photo	See Photo
Spindle diameter - 80 mm maximum diameter of the boring spindle - 450 mm maximum depth of drilling - 710 mm Spindle stroke - 900 mm Clamping table surface - 1000x1000mm Machine floor space - 2400x4600mm Machine weight - 10000 kg Tail stock and faceplate is available.

ID	MA34430
Make	Tos ,Varnsdorf
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 15000 kg

ID	MA34429
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Vertical Travel of Headstock:44� Table Cross travel:63� Saddle Travel:49� Built In Power Rotary Table:49� x 49� Built In Outrigger Rails Spindle Speeds from 9 to 1120 RPM Diameter Built In Facing Head: 23� Tailstock for Line Boring Boring Bars Threading 10 KW 220/440 Volt Electrics

ID	MA34269
Make	Tos ,Varnsdorf
Model	WHN9B
YOM	1977/Repair in 2018
Condition	Good Condition
Photo	See Photo
Spindle diameter: 90 mm X / Y / Z travel: 125 0x 900 (1120) x 1000 mm Spindle extension W: 680 mm Spindle speed: 9-1120 / min Spindle taper SK 40 Clamping surface of the table 1000x1120 mm Max. workpiece weight 3000 kg Power hl. electric motor 20 kW Dimensions L x W x H: 4180 x 2300 x 2690 mm Machine weight 12,000 kg + weight of accessories Accessories: angle head and 3 cabinets for equipment and tools, complete documentation

ID	MA34227
Make	Tos ,Varnsdorf
Model	W100
YOM	1967
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

ID	MI7604
Make	WMW Union ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Table 1500x1350 X 1500 Y 1200 Z1200 Spindle 100

ID	MI7589
Make	San Rocco
Model	120b4
YOM	1992
Condition	Good Condition
Photo	See Photo
TRAVEL X) 2.100 MM. W) 1.500 MM. Y) 1.800 MM. SPINDLE ? - ISO 50; 120 MM. SPINDLE STROKE (Z) 800 MM SPINDLE SPEEDS - N. 18; 13 - 1.000 RPM SPINDLE MOTOR POWER 17,4 KW. TABLE 1.520 x 1.220 MM. Cnc control : MARECO

ID	MI7588
Make	Stanko-Russia
Model	2A622-1
YOM
Condition	Good Condition
Photo	See Photo
Spindle ; 110mm Iso 50 Table size: 1250mm x 1100mm Cross: 1650mm Vertical 1250mm Control : Allen Bradley 8601 MC

ID	MI7585
Make	San Rocco
Model	AL55
YOM
Condition	Good Condition
Photo	See Photo
Spindle: 55mm Table size: 950mm x 600mm Cross: 1000mm Tail stock All harden bed

ID	MI7583
Make	San Rocco
Model	al110
YOM
Condition	Good Condition
Photo	See Photo
Spindle: 110 Table size: 1800mm x 1500mm Cross: 2800mm Vertical : 1850mm 3 axis Dro All harden bed with ball screws

ID	MI7579
Make	Ceruti
Model
YOM
Condition	Good Condition
Photo	See Photo
Table : 1100x850 mm Spindle :80 Travel : 1500x1500xh1300 mm With Chuck

ID	MI7578
Make	WMW Union ,Germany
Model	BFT110/5
YOM
Condition	Good Condition
Photo	See Photo
Spindle : 110mm ( ISO 50) Table Size : 1400mm x 1250mm Cross Travel : 1500mm Vertical : 1250mm Facing chuck All Harden Beds New Panel & new pendant with full trial

ID	MI7577
Make	Stanko-Russia
Model	2A622-1
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE � - ISO 50 110 MM. TABLE 1.120 x 1.250 MM. MAX. WEIGHT ON TAB

ID	MI7552
Make	Cincinnati,USA
Model	90
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia.:90mm Rotary Table Size: 1450mm X 1650mm

ID	MI7551
Make	Romanian
Model	AF85
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia: 85mm Chuck Dia: 500mm Table Size: 900mm X 1100mm X Axis (Cross Travel): 1100mm Y Axis (Vertical Travel): 900mm Z Axis (Longitudinal Travel): 1700mm W Axis (Spindle Travel): 700mm

ID	MI7550
Make	Forges DeGilly,Belgium
Model	70
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Spindle Dia.: 70mm Chuck Dia: 450mm Table Size: 1000mm X 800mm Cross Travel (X Axis): 800mm Vertical Travel (Y Axis): 750mm Longitudinal Travel (Z Axis): 1500mm Spindle Movement (W Axis): 600mm

ID	MI7549
Make	Monti
Model	MC75
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia: 75mm Chuck Dia:480mm Spindle Movement: 500mm Table Size:1200mm X 800mm Height: 900mm Cross: 1000mm Length: 800mm

ID	MI7548
Make	Juaristi
Model	MDR110
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Spindle Dia : 110 mm Spindle Taper : ISO 50 Spindle Travel : 820 mm Cross Travel : 3000 mm Vertical Travel : 1800 mm Longitudinal Travel : 2400 mm Table Size : 1100 x 1400mm Hardened Guideway, DRO, Facing Chuck, Spindle support

ID	MI7547
Make	Tos Czech
Model	H63A
YOM	1968
Condition	Good Condition
Photo	See Photo
Chuck Dia: 400mm Table Size: 800mm x 880mm Vertical Travel: 710mm Cross Travel:800mm Length: 1800mm Spindle Movement: 560mm With Chuck & Tail Stock

ID	MI7546
Make	Tos Czech
Model	H63
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia: 400mm Table Size: 800mm x 880mm Vertical Travel: 710mm Cross Travel:800mm Length: 1800mm Spindle Movement: 560mm With Chuck & Tail Stock

ID	MI7545
Make	Kearns
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
S Type Facing Chuck Dia: 240mm Vertical Travel: 300mm Cross Travel: 300mm Column Movement Travel: 300mm Table Size: 560x400mm Length Travel: 600mm

ID	MI7541
Make	Ceruti
Model	AC85
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter - 85 mm Table Size - 1300 mm x 1100 mm Cross Travel - 1600 mm Vertical travel - 1200 mm Longitudinal travel - 1600 mm

ID	MI7539
Make	Pama Italy
Model	AL100
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter - 100 mm Cross Travel - 2100 mm Table Size - 1530 mm x 1270 mm Table Load Capacity - 8 Tons Weight of the Machine - 21 Tons (Approx.)

ID	MA34075
Make	Tos ,Varnsdorf
Model	WH80
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 80 mm, Maximum diameter of the boring spindle:450 mm, Maximum depth of drilling:710 mm, Spindle stroke:900 mm, Clamping table surface:1000 x1000 mm, Spindle motor:7.5 kW, Motor for rapid:1.1 kW, Machine floor space: 2400 x 4600 mm, Machine weight:10,000 kg.

ID	MA33935
Make	Tos Czech
Model	WH80
YOM	1959
Condition	Very good condition
Photo	See Photo
Spindle dia: 80 mm table - 900 - 1120 MM Table capacity - 2400 KG

ID	MI7401
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Table size: 1125/900, X travel: 1000 mm, Y travel: 900 mm, Z travel: 2300 mm, Total bed: 2600, With tell stock & DRO 2 axis

ID	MI7400
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
Table size: 1100/900, X travel: 1000 mm, Y travel: 900 mm, Z travel: 2300 mm, Total bed: 2600, With tell stock & DRO 2 axis

ID	MI7399
Make	PBR,Italy
Model	AFU80
YOM
Condition	Good Condition
Photo	See Photo
Spindle: 80 mm, Table size: 1200 x 900 mm, Cross: 1650 mm, Vertical; 1000 mm, Facing chuck , DRO, Tail stock

ID	MA33871
Make	WMW Union ,Germany
Model	BFT100/IV
YOM
Condition	Good working condition
Photo	See Photo
Spindle Diameter - 100 mm Table Size - 1320 mm x 1500 mm Cross Travel of Table (X Travel) - 1600 mm Vertical Travel of Head (Y Travel) - 1250 mm Spindle Travel (Z Travel ) - 1000 mm Longitudinal Travel of Table ( W Travel ) � 2000mm Weight - 18 Tons (approx) - Complete with facing chuck, tailstock, Angle plates, etc. - Slides are completely scratch-less

ID	MI7397
Make	WMW Union
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia:80 mm

ID	MA33792
Make	WMW Union ,Germany
Model	BFT130
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm

ID	MI7357
Make	WMW Union ,Germany
Model
YOM
Condition	Excellent condition,under power
Photo	See Photo
Spindle dia: 130 mm, X travel: 2800 mm, Y travel: 1600 mm, 3 axis DRO

ID	MA33784
Make	Tos ,Varnsdorf
Model	W100A
YOM	2007
Condition	Good Condition
Photo	See Photo
Description universal horizontal boring machine W100 A with manual control rigid stand, cross-shaped movable table 4 linear axes + turntable rising stem faceplate the machine is designed for piece and small-scale production designed for both roughing and finishing digital measurement of linear axes and table rotation with position indication (UCI) on request, the machine is equipped with a tool cooling system (CHZ), a rest, a guide or clamping flange, a milling head, etc. Movable axes of the machine X-longitudinal movement of the rotating table Z-lateral movement of the rotating table Y-vertical movement of the headstock on the rack W-spindle extension U - extension of the tool carriage of the faceplate B-table rotation S-rotation of the spindle and faceplate Technical characteristics Value Spindle diameter, mm 100 Turntable size, mm 1250 x 1250 Enlarged turntable (optional), mm 1500 x 1500 Table load capacity 1250 x 1250, kg 3000 Table load capacity 1500 x 1500, kg 2500 ISO 50 spindle cone Spindle speed range, min-1 7,1 - 1120 The number of steps of spindle rotation, 23 PCs. Main engine power, kW 11 The rotation speed of the main engine, min-1 1460 Maximum torque on the spindle, Nm 3350 Minimum spindle torque, Nm 78.5 Cross table movement-x axis, mm 1600 Longitudinal movement of the table-Z axis, short frame (without the support of the bar), mm 810 Longitudinal movement of the table-Z axis, long frame (with the support of the boring bar), mm 1250 Longitudinal movement of the table-Z axis, long frame (without the support of the bar), mm 1750 Vertical movement of the spindle-y axis, mm 1120 Spindle extension-W axis, mm 900 Size of table clamping" T " slots, mm 22 H8 Diameter /depth of the Central hole of the table, mm 180H6 / 6 Working feeds on x, Y, Z, W, U axes (18 stages), mm / min 18-900 Working feeds on x, Y, Z, W, U axes (32 steps), mm / Rev 0.02-12 Threading feeds on the axes X, Y, Z, W, U, (metric, 18 steps), mm / Rev 0.25-12 Threaded feeds on x, Y, Z, W, U axes (inch, 18 steps), stroke / 1" 120-2.5 Accelerated feed on x, Y, Z, W, U axes, mm / min 2800 Accelerated table rotation feed-b axis, min-1 1 Diameter of the faceplate, mm 600 Diameter/depth of the Central hole of the faceplate, mm 280 H6 / 8 Extension of the tool carriage of the faceplate-u axis, mm 210 Maximum diameter of the end treatment, mm 900 Number of steps in the speed range of the faceplate, PCs. 16 Speed range of the faceplate, mm 7,1-224 Total power consumption, kVA 15 Total machine weight, kg 14000 The area of the machine in plan, mm 5000 x 7500 The guide axes on all linear axes, the guide planes are ground the guide planes of the frame and longitudinal sled are lined with hardened plates the table and faceplate guide planes are pinned Lubrication system The W100 a horizontal boring machine is equipped with a HYTOS lubrication unit. Lubrication of the machine is Central, is carried out according to the operating time of the units and is controlled by a controller located in the electric Cabinet. The x, Y, Z, W, and b axes are automatically lubricated. the U Axis is lubricated separately using an oiler. Spindle head retractable working spindle + faceplate ISO 50 motorized tool clip asynchronous electric motors for driving spindle rotation and movement of all axes drive the spindle and movements using a mechanical gear mechanical switching of rotation and movement almost all machine controls are installed on the headstock balancing the headstock using a counterweight in the rack, via a chain

ID	MA33759
Make	Tos ,Varnsdorf
Model	W100
YOM
Condition	Excellent condition,under power
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm

ID	MA33733
Make	Tos ,Varnsdorf
Model	W100
YOM	1966
Condition	Very good condition
Photo	See Photo
Spindle size: 100 mm, Spindle speeds: 7.1-1120 rpm, Spindle taper: Morse 4 X axis: 1600 mm, Y axis: 1120 mm, Z axis: 1250 mm, W axis: 900 mm, Table size: 1250 x 1250 mm, Max table load: 3 ton, Table type: rotary facing chuck diameter: 600 mm, Slide travel: 210 mm, Max facing diameter: 900 mm, Facing chuck speed range: 7.1-224 rpm, Total power: 13 kW, Dimensions: 6020 x 3000 x 3500 mm, Weight: 16500 kg.

ID	MA33707
Make	Russian
Model	2A622F1
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 110 mm Table size 1250 x 1250 or 1120 x 1250 mm; Table load 5000 kg; Diam. of boring spindle-110 mm; Spindle taper ISO 50 mm; Max.Travel: X-1250 mm,Z-1000 mm,Y(ram vertical)-1000 mm,W (spindle)-710 mm, B(turn of a table)- not limited in degrees; Rotation limit of a spindle 6-1250 t/min; Work feed limits: X,Y,Z,W 1.25 -1250 mm/min,B- 1-360 dgr/min; Main drive power 11 KW; Dimensions:length 7600 mm, width 3750 mm,height 3250 mm, weight 17000 kg.

ID	MA33686
Make	WMW Union ,Germany
Model	BFT130
YOM	1990
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm, Table: 2000 x 1800 mm, X: 2200 mm, Y: 1500 mm

ID	MA33677
Make	WMW Union ,Germany
Model	BFT90/3
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia: 90 mm X travel: 1000 mm Y travel: 1600 mm Z travel: 1000 mm Table: 1100 x 1000 mm Weight of machine: 9 t

ID	MA33565
Make	TOS
Model	W100A
YOM
Condition	Working
Photo	See Photo
Diameter of working spindle ..... 100 mm Travel X-axis ..... 1600 mm Travel Y-axis ..... 1120 mm Spindle speed ..... 0 - 1120 /min. Spindle travel - W axis ..... 900 mm Travel Z-axis ..... 1250 mm Spindle taper ..... ISO 50 . Clamping area of rotary table ..... 1250 x 1250 mm Main motor power ..... 11 kW Max. weight of workpiece ..... 3000 kg Machine dimensions l x w x h ..... 6710 x 3450 x 3000 mm Machine weight ..... 14000 kg

ID	MA33539
Make	TOS
Model	W100
YOM	1967
Condition	Good Condition
Photo	See Photo \| See Video
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm

ID	MA33503
Make	Juaristi
Model	125CF
YOM	1980
Condition	Good Condition
Photo	See Photo
Spindle Diameter : 125mm X axis travel : 3000mm Y axis travel : 2500mm (Vertical) Z axis travel : 2600mm Rotary table : Si/Yes/Oui/Ja Table Size : 2000mm x 1700mm Spindle Speeds : 5-1000 r.p.m. Tool Taper : ISO 50 Max weight of table : 8 tons Spindle Traverse : 800 mm Digital Read Out : Fagor 3 ejes/axis Equipment with : Universal milling head, outrigger supports, screw cutting imperial and metric Motor : 25cv/hp Weight : 34 Tn.

ID	MA33478
Make	TOS
Model	H100A
YOM	1962
Condition	Good Condition
Photo	See Photo
Spindle diameter - 100mm X travel - 1300mm Y travel - 1250mm Z travel - 1250mm Spindle (W) travel - 900mm Table - 1250x1250mm

ID	MI7278
Make	WMW Union ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
spindle size 100 mm,Cross 1600 mm , Vertical -1250 , table ,table 1250 X 1450 mm, facing chuck available.Harden bed & ball screw.

ID	MI7275
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 80mm Cross travel (X): 1000 mm Vertical travel (Y): 900 mm Longitudinal travel (Z): 1700 mm Spindle taper: 4 MT Face plate speeds: 2,8-125 pr/min Spindle speeds: 99-1000 rpm Table size T-slotted: 900x1100 mm Chuck Dia : 500mm Length: 4700 mm Height: 2750 mm Width: 2600 mm Weight: 7600 kg

ID	MI7274
Make	WMW Union ,Germany
Model	BFT80/2
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 80mm Cross Travel : 1250mm Vertical Travel : 1000mm Table Size : 1100mm x 1000mm Hardened Bed Facing Chuck DRO

ID	MI7273
Make	WMW Union ,Germany
Model	BFT90/5
YOM	1986
Condition	Good Condition
Photo	See Photo
Spindle diameter (mm) 90 Table length (mm) 1000 Table width (mm) 1100 Longitudinal X (mm) X = 1600 Cross Y (mm) Y = 1187 Pos ATC Z = 980 Number APC. W = 700 iso 50 / 1600 Rpm - incl. tailstock - incl. facing head

ID	MA33384
Make	Tos ,Varnsdorf
Model	WHN13.8
YOM	1976
Condition	Good Condition
Photo	See Photo
spindle diameter 130 mm x-travel 3500 mm y-travel 2000 mm z-axis 1250 mm W-axis (spindle longitudinal) 800 mm table: 1800x1800 mm spindle headstock drive 55 / 37 kW total power requirement 80 kW spindle taper ISO 50 weight of the machine ca. 36 t The machine has ballscrew on X axis ( longitudinal) and Z axis (column movement). The machine has a general revision in 2016 when it was regrinded the guideways for the vertical Y axis and installed DRO digital readout and scales. The machine is in good working condition.

ID	MA33363
Make	TOS
Model	W100
YOM	1969
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm

ID	MA33344
Make	WMW Union ,Germany
Model	BFT130/5
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm ISO 50 X: 1600 mm, Y: 1600 mm, Table size: 1400 x 1600 mm, With face chuck, tailstock, 4 axis DRO and toolings Machine weight: 35 tons

ID	MA33280
Make	WMW Union ,Germany
Model	BFT90/3
YOM	1980
Condition	Good Condition
Photo	See Photo
diameter of workspindle 90 mm; tool taper MT 5; main drive 11 kW table size 1400 x 1250 mm; max. table load 2500 kg travel X / Y / Z / W 1000 / 1000 / 1250 / 710 mm incl. equipment like: facing head, digital read out in 3 axis, a lot of tool holders

ID	MA33261
Make	TOS
Model	W100
YOM	1958
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020 x 3000 x 3500 Weight: 14000 kg

ID	MA33159
Make	TOS
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
X (longitudinal) 1600 mm, Y (transverse 1020mm, Z (vertical) 1250 mm, Table length 1250 mm, Table width 1250 mm, Max. piece weight of 3000 kg, Spindle diameter 100 mm, Max. rotational speed 1120 rpm, Spindle motor power 11 KW.

ID	MA33031
Make	Tos ,Varnsdorf
Model	W100
YOM	1970
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 14000 kg

ID	MA33027
Make	WMW Union ,Germany
Model	BFT90/3-1
YOM	1986
Condition	Good Condition
Photo	See Photo
X travel - 1000 mm Y travel - 1000 mm Z travel - 1600 mm Table - 1000 x 1120 mm Spindle diameter - 90 mm

ID	MA33001
Make	WMW Union ,Germany
Model	BFT90/3-1
YOM	1984
Condition	Good Condition
Photo	See Photo
spindle 90 mm, table 1000 x 1120 mm,X Y Z W 1000 x 1600 x 1000 x 710 mm

ID	MA32973
Make	Tos Czech
Model	WHN13
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm

ID	MA32972
Make	Skoda Czech
Model	WD130
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm,

ID	MA32949
Make	WMW Union ,Germany
Model	BFT130/6
YOM
Condition	Good Condition
Photo	See Photo
X travel - 2750mm Y travel - 2500mm Z travel (without a rest) - 2330mm Z travel (with a rest) - 1710mm W travel - 1000mm Table capacity - 8000kg Table - 1800x2000mm

ID	MA32921
Make	Tos ,Varnsdorf
Model	W100A
YOM	2000
Condition	Good Condition
Photo	See Photo
Diameter of working spindle ..... 100 mm Travel X-axis ..... 1600 mm Travel Y-axis ..... 1120 mm Spindle speed ..... 0 - 1120 /min. Spindle travel - W axis ..... 900 mm Travel Z-axis ..... 1250 mm Spindle taper ..... ISO 50 . Clamping area of rotary table ..... 1250 x 1250 mm Main motor power ..... 11 kW Max. weight of workpiece ..... 3000 kg Machine dimensions l x w x h ..... 6710 x 3450 x 3000 mm Machine weight ..... 14000 kg

ID	MA32920
Make	Tos ,Varnsdorf
Model	W100A
YOM	1998
Condition	Good Condition
Photo	See Photo
Diameter of working spindle ..... 100 mm Travel X-axis ..... 1600 mm Travel Y-axis ..... 1120 mm Spindle speed ..... 0 - 1120 /min. Spindle travel - W axis ..... 900 mm Travel Z-axis ..... 1250 mm Spindle taper ..... ISO 50 . Clamping area of rotary table ..... 1250 x 1250 mm Main motor power ..... 11 kW Max. weight of workpiece ..... 3000 kg Machine dimensions l x w x h ..... 6710 x 3450 x 3000 mm Machine weight ..... 14000 kg DRO Heidenhain 3 axis with supporting column

100

ID	MA32890
Make	Tos ,Varnsdorf
Model	W100A
YOM	1981
Condition	Good Condition
Photo	See Photo
Headstock diameter of spindle : 100mm taper in spindle - CSN 220131 : 50 (ISO 50) axial movement of spindle : 900mm maximum distance - spindle axis to table surface, Y" : 1120 mm maximum distance - face plate to boring bar support : 2000mm maximum diameter of face turning : 900mm number of spindle speeds : 23 range of spindle speeds :7.1 to 1120 r.p.m number of face plate speeds : 16 rage of face plate speeds : 7.1 to 224 r.p.m Table : cross travel of table,, X" : 1600 mm longitudinal travel of table ,,Z" (W) : 1250 mm clamping surface of table : 1250x1250mm number of T-slots of table : 9 width of T-slots of table : (CSN 02 1030) : 22mm pitch of T-slots : 160/80mm diameter of centering hole of table : 180 H6 mm boring feeds (per one spindle revolution) number : 32 range : 0.02 to 12 mm/rev. milling feeds : 18 number range : 18 to 900 mm/rev. feeds of face plate slide : 32 number range : 0.02 to 12 mm/rev. circular feeds of table referred to 1000 mm dia : 18 number range : 25 to 1400 mm/rev. rapid traverse : spindle, headstock, slide and table : 2800 mm/min table rotation : 1 r.p.m. bearing of boring bar support : 696 mm/min maximum weight of workpiece : 3000 kg Threads : 18 metric threads, lead : 0.25 to 12 mm/rev. 18 inch threads : 120 to 2.5 t.p.i Drive : Main motor output (for speeds and feeds) : 11kW main motor speed : 1400 r.p.m output of end support motor : 0.55 kW speed of end support motor :2780 r.p.m total input of machine : 15 kVA weight of machine (without packing) : 14,000 kg

101

ID	MI7170
Make	WMW Union
Model	BFT130/6
YOM	1982
Condition	Good Condition
Photo	See Photo
Clamping - 1800 x 2000 mm Table cross movement - 2740 mm Headstock vertical movement - 2000 mm Long table movement - 1695 mm Drill spindle axial movement - 1000 mm Max . Facing diameter - 1400 mm Accuracy - 0.01 mm System of reading - TNC 135

102

ID	MI7167
Make	WOTAN
Model	B105M
YOM	1970
Condition	Good Condition
Photo	See Photo
Spindle diameter- 105 mm Table area- 1100x1400 mm x-travel- 1800 mm y-travel- 1600 mm z-travel- 1500 mm W-axis� 600 mm spindel speed- 12,5-1000 U/min Overall dimensions- 5x4,1x4,9 m Feed- 0,025-10 mm/U T-gutter- 22H7 T-slot - distance- 150 mm Total power requirement- 16 kW Machine's weight- 15 t

103

ID	MI7166
Make	HMT,India
Model	AZ11
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter : 110 mm X-Axis Cross Travel : 1600 mm Y-Axis Vertical Travel : 1170 mm Z-Axis Longitudinal Travel : 1370 mm Table Size : 1200 mm x 1200 mm

104

ID	MI7165
Make	Pegard
Model	U110P
YOM	1978
Condition	Good Condition
Photo	See Photo
Spindle Diameter � 110 mm Table Size � 1400 mm x 1000 mm Axis X x Y x Z � 1550 mm x 1100 mm x 1150 mm

105

ID	MA32826
Make	WMW Union ,Germany
Model	BFT130NC
YOM
Condition	Good Condition
Photo	See Photo
SPINDLE � - ISO 50 130 MM. TABLE 1.800 x 2.000 MM. MAX. WEIGHT ON TABLE 8 TONS. TABLE TRANSVERSAL TRAVEL (X) 2.750 MM. TABLE LONGITUDINAL TRAVEL (W) 2.500 MM. HEAD VERTICAL TRAVEL (Y) 2.500 MM. SPINDLE STROKE (Z) 900 MM. SPINDLE POWER 33 KW. SPINDLE SPEEDS 5 � 1.000 RPM. TOTAL WEIGHT 37 TONS. CNC HEIDENHAIN TNC 355 BUILT IN 1991 COMPLETE WITH: - FACING HEAD - VERTICAL MILLING HEAD - BORING SUPPORT

106

ID	MA32814
Make	Tos ,Varnsdorf
Model	W100
YOM	1966/1998
Condition	Good Condition
Photo	See Photo
Diameter of working spindle ..... 100 mm Travel X-axis ..... 1600 mm Travel Y-axis ..... 1120 mm Spindle speed ..... 7 - 1120 /min. Spindle travel - W axis ..... 900 mm Travel Z-axis ..... 1250 mm Spindle taper ..... ISO 50 . Max. load of table ..... 3000 kg Machine dimensions l x w x h ..... 6710 x 3450 x 3000 mm Machine weight ..... 14000 kg Main motor power ..... 11 kW Total input ..... 17 kVA Clamping area of table ..... 1250 x 1250 mm Face plate diameter ..... 600 mm Max. diameter of face turning ..... 900 mm

107

ID	MA32808
Make	Tos ,Varnsdorf
Model	W100
YOM	1977
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 14000 kg The machine is dismantled. It's complete.

108

ID	MA32798
Make	Skoda Czech
Model	WD200A
YOM	1965
Condition	Good Condition
Photo	See Photo
Spindle diameter - 200mm X travel - 6000mm Y travel - 3150mm Z travel - 1600mm W travel - 2000mm Table - 2500x2500mm

109

ID	MA32756
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020 x 3000 x 3500 Weight: 14000 kg

110

ID	MA32746
Make	WMW Union
Model	BFT 90/3-1
YOM	1984
Condition	Good Condition
Photo	See Photo
X travel - 1000mm Y travel - 1000mm Z travel - 1600mm Table - 1000x1120mm Spindle diameter - 90mm

111

ID	MA32671
Make	Tos ,Varnsdorf
Model	W9A
YOM	1977
Condition	Good Condition
Photo	See Photo \| See Video
Spindle's diameter - 90 mm, Table - 1120 x 1000 mm Table's movement - 1250/1400 mm Table's capacity - 3000 kg Weight - 11200 kg

112

ID	MA32596
Make	WMW Union ,Germany
Model	BFT90/3-2
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 90 mm, X travel - 1000 mm, Y travel - 1000 mm, Z travel - 1600 mm, Table - 1000 x 1120 mm, Tailstock isn't available.

113

ID	MA32573
Make
Model	2620VF1
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 90mm Faceplate's diameter - 630mm Rotary table - 1250x1120mm Table's capacity - 3000kg

114

ID	MA32572
Make
Model	2622VF1
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 110mm Faceplate's diameter - 630mm Table - 1250x1120mm Weight - 12900

115

ID	MA32571
Make
Model	2622GF1
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 110mm Faceplate's diameter - 630mm Table - 1250x1120mm Weight - 12900

116

ID	MA32505
Make	Stanko-Russia
Model	2620
YOM
Condition	Good Condition
Photo	See Photo
New drive and digital readout are fixed. Spindle diameter - 90 mm Boring diameter by spindle - 320 mm Boring diameter by faceplate's support - 600 mm Table - 900 x 1120 mm Workpiece's weight - 2000 kg Dimensions - 5510 x 3200 x 3012 mm Weight - 12000 kg

117

ID	MA32476
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Tailstock isn�t available. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250 x 1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020 x 3000 x 3500 Weight: 14000 kg

118

ID	MA32467
Make
Model	2H637F21
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle diameter - 160mm Workpiece's weight - 10000kg Spindle longitudinal travel - 1000mm Spindle stock vertical travel - 1800mm Table - 1600x1800mm Table X travel - 2000mm Table Y travel - 1600mm Dimensions - 7310x5480x5340mm Weight - 37600kg

119

ID	MA32463
Make	Tos Czech
Model	W100A
YOM	1987
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250 x 1250 mm Facing chuck diameter: 600 mm Max facing diameter: 900 mm Facing chuck speed range: 7.1 - 224 rpm

120

ID	MA32457
Make	Tos ,Varnsdorf
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Tailstock is unavailable. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250 x 1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020 x 3000 x 3500 Weight: 16000 kg

121

ID	MA32432
Make	Tos ,Varnsdorf
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
There are 2 such machines available. Both machines are located in one place. Tailstock isn�t available. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 14000 kg

122

ID	MA32431
Make
Model	AFD100
YOM	1977
Condition	Good Condition
Photo	See Photo
The machine is in working conditions. Tailstock is available. Spindle hole - 100mm X travel - 2000mm Y travel - 1600mm Vertical travel - 1250mm

123

ID	MA32398
Make	Stanko-Russia
Model	2A635
YOM	1969
Condition	Good Condition
Photo	See Photo \| See Video
Spindle dia: 125 mm, Spindle taper: 80 , Axes X/Y/Z/U: 1400 x 1400 x 1600 x 1000 x 300 mm, Table : 1600 x 1250 mm, Main motor: 14 kW

124

ID	MA32377
Make
Model	WHN9B
YOM	1980
Condition	Good Condition
Photo	See Photo
Spindle's diameter - 90 mm, X travel - 1250 mm, Y travel - 900 mm, Z travel - 1000 mm, Table - 1000 x 1120 mm, Dimensions - 4180 x 2300 x 2690 mm, Weight - 12000 kg

125

ID	MA32357
Make	Tos Czech
Model	W100
YOM	1970
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm

126

ID	MA32335
Make	TOS
Model	WHN13.4A
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle diameter: 130 mm Rotary table - 1800x1800 mm X Axis - 2300 mm Y Axis - 1900 mm W Axis - 1250 mm Z Axis - 800 mm Table capacity - 12000kg Weight - 36 tons

127

ID	MA32251
Make
Model	2H636GF1
YOM
Condition
Photo	See Photo
Spindle diameter: 125 mm Planing plate diameter: 800 mm Table dimensions: 1600 x 1800 mm Max workpiece weight: 8000 kg Max table travel: long: X-1600 mm Max table travel:traverse: Y-1400 mm Spindle travel: Z-1000 mm Spindle cone: 80 mm Main engine power: 17 kW Dimensions:7640x4110x4180 mm Machine weight: 35000 kg

128

ID	MA32232
Make	TOS
Model	H100
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 100mm Table - 1250x1250mm Cross travel - 1450mm Longitudinal travel - 2200mm Vertical travel - 1250mm Chuck diameter - 600mm

129

ID	MA32164
Make	TOS
Model	W100
YOM	1965
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

130

ID	MA32026
Make	Tos Czech
Model	W100
YOM	1968
Condition	Good Condition
Photo	See Photo
Tailstock is available. The machine is complete. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

131

ID	MA32020
Make	Russian
Model	2622B
YOM	1980
Condition	Very good condition
Photo	See Photo
Spindle hole - 110 mm Table - 1250 x 1120 mm Table load - 3000 kg Dimensions - 3000 x 5700 x 3000 mm Weight - 12500 kg Tailstock is available.

132

ID	MA32000
Make	TOS
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Tailstock is NOT available Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

133

ID	MA31991
Make	Russian
Model	2A622-1
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle diameter - 110 mm Table effective area - 1120 x 1250 mm Max. work piece weight - 4000 kg Machine dimensions - 6100 x 3950 x 3200 mm Machine weight - 17000 kg

134

ID	MA31978
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, Spindle taper: Morsa 6, Spindle loading: 3000 kg, Table: 1250 x 1250 mm, Axis travel X/Y//W: 1250/1120/1250/900 mm, Facing chuck dia: 600 mm, Main motor: 7,5 kW, Weight: 14 ca

135

ID	MA31958
Make	Shibaura
Model	BTD11
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle dia: 110 mm, X travel: 1500 mm, Y travel: 1800 mm, Table: 1600 x 1400 mm

136

ID	MA31899
Make	Tos ,Varnsdorf
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, X axis: 1600 mm, Y axis: 1120 mm, Z axis: 1250 mm, W axis: 900 mm, Table size: 1250 x 1250 mm, Max. table load: 3 ton, Max. facing diameter: 900 mm, Total power: 15 kW, Dimensions: 6020 x 3000 x 3500 mm. Weight: 16000 kg

137

ID	MA31896
Make	Tos Czech
Model	W9
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter: 90 mm, Clamping area: 1000 x 1120 mm X travel: 1250 mm, Y travel: 1120 mm, Z travel: 1400 mm, W travel:710 mm, Work pieces weight: 3000 kg, Machine weight: 11000 kg.

138

ID	MA31888
Make	WMW Union ,Germany
Model	BFT125/5
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter: 125 mm, Table: 2000 x 1800 mm, X travel: 1600 mm, Y travel: 2000 mm, Z travel: 2000 mm, Table capacity: 6300 kg

139

ID	MA31886
Make	WMW Union ,Germany
Model	BFT110/6
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle diameter: 110 mm, X travel: 1950 mm, Y travel: 1600 mm, Z travel: 2000 mm, Table size: 1400 x 1600 mm, max. work- piece weight: 8000 kg, Dimensions: 7000 x 4700 x 4400 mm, Machine weight: 26700 kg.

140

ID	MA31864
Make	Tos Czech
Model	W9
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 90 mm Clamping area - 1000 x 1120 mm X travel - 1250 mm Y travel - 1120 mm Z travel - 1400 mm W travel - 710 mm Workpiece's weight - 3000 kg Machine's weight - 11000 k

141

ID	MA31841
Make	SKODA
Model	W200
YOM	1969
Condition	Good Condition
Photo	See Photo
Electrics is to be modernized. Table - 3500x3500mm Travel of the column along the bed - 4000mm Travel of the spindle stock along the column - 3150mm Boring depth - 2000mm Spindle diameter - 200mm Weight of the machine - 103400kg Year of manufacturing - 1968 Year of last full repair - 1989

142

ID	MA31813
Make	Tos Czech
Model	WHN13.8A
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle diameter :130 mm X-travel :3500 mm Y-travel :2000 mm Z-axis :1250 mm W-axis (spindle longitudinal) ;800 mm Table: 1800 x 1800 mm Turning speed range - power take off spindle: 5 -900 U/min Spindle headstock drive: 37 kW Rapid traverse: 3,2 m/min Spindle taper ISO ISO 50 Total power requirement: 80 kW Weight of the machine ca.: 36 t The machine is equipped with DRO &rotary table.

143

ID	MA31803
Make	Tos ,Varnsdorf
Model	WHN 13 A
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter: 5.11", Spindle taper: ISO50, Rotary table sie: 70.8" x 70.8" Table load capacity: 26,400 LBS, Spindle speeds: ( 2ranges, 22 steps) 5.6 -710 RPM Spindle motor: 40 HP, Spindle travel: 31.5" Spindle axis to table clamping face: 0"-78.7" Table transverse travel: 118.1" Column longitudinal travel: 49.2" Headstock vertical travel: 78.7" Feeds: 0.15-142 IPM, Rapid: 142 IPM, Motor for longitudinal bed feed: 5.6 HP, Motor for traverse bed feed: 5.6 HP, Floor space (approximate): 278" x 265 "

144

ID	MA31674
Make	Sverdlov
Model	2A637F1
YOM	1985
Condition	Good Condition
Photo	See Photo
Spindle diameter: 160 mm, Table size: 1600 x 1800 mm, Max. work piece weight: 10000 kg Table cross movement (X): 2000 mm, Table longitudinal movement (W): 1600 mm, Max. movement of spindle head (Y): 1600 mm, Max. spindle horizontal movement (Z): 1000 mm, Table round movement (B), degrees 360 Feeds of X/Y/Y/W axes: 2...2000 mm/min Rapid feed of X/Y/W axes: 5 m/min Rapid feed of Z axis: 4 m/min Spindle speed range: 5...1000 rpm Spindle feed range: 2...2000 mm/min Spindle head feed range: 2...2000 mm/min Total power required: 35,5 kW Machine dimensions: 5622 x 8160 x 5135 mm Machine weight: 33337 kg

145

ID	MI7022
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 80 mm Spindle Taper : MT-5 Cross Travel : 1100 mm Vertical Travel : 1000 mm Logitudinal Travel : 1500 mm Table Size : 1100 x 1000mm Facing Chuck, Tailstock

146

ID	MA31649
Make	Tos ,Varnsdorf
Model	W100
YOM	1965
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

147

ID	MA31604
Make	Scharmann
Model	FB315
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia 125mm Spindle Taper 5MT Spindle Speeds 5 to 740 RPM Facing Head Dia. 450mm Rotating Table Size 1000 x 800mm Long Traverse 815mm Cross Traverse 800mm Vertical Traverse 710mm Power Draw Bar 3 Axis DRO All Manuals.

148

ID	MA31583
Make	WMW Union ,Germany
Model	BFT100/III
YOM	1961
Condition	Good Condition
Photo	See Photo
Spindle's diameter - 100 mm Max diameter with facing work - 1250 mm Max diameter with chuck's drilling - 630 mm Drilling depth - 900 mm Faceplate's diameter - 680 mm Distance between spindle and clamping surface - 1200 mm Max distance between faceplate and rest - 3000 mm

149

ID	MA31575
Make	Tos Czech
Model	W100
YOM	1981
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, ZX axis: 1600 mm, Y axis: 1120 mm, Z axis: 1250 mm, W axis: 900 mm, Table size: 1250 x 1250 mm, Max table load: 3 ton, Max facing diameter: 900 mm, Total power: 15 kW, Dimensions: 6020 x 3000 x 3500 mm, Weight: 16000 kg, Tailstock isn't available

150

ID	MA31555
Make	Tos Czech
Model	W9A
YOM
Condition	Good Condition
Photo	See Photo
Spindle's diameter - 90 mm, Table - 1120 x 1000 mm Table's movement - 1250/1400 mm Table's capacity - 3000 kg Weight - 11200 kg

151

ID	MA31464
Make
Model	2A622F4
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle diameter - 110mm Faceplate's diameter - 630mm Table - 1250x1120mm X travel - 1000mm Y travel - 1000mm Z travel - 1200mm W travel - 710mm Dimensions - 6790x4880x3100mm Weight - 16000kg

152

ID	MA31397
Make
Model	BFT 90/3-1
YOM	1989
Condition	Good Condition
Photo	See Photo
Spindle diameter - 90mm X travel - 1000mm Y travel - 1000mm Z travel - 1600mm W travel - 710mm Table - 1000x1100mm Table load - 2500kg Weight - 9000kg

153

ID	MI6987
Make	WMW
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Table: 1120 x 900 mm, Long travel: 1250 mm, Adaption: MT5, Facing chuck dia: 500

154

ID	MA31252
Make	WMW Union ,Germany
Model	BFT100/III
YOM	1964
Condition	Good Condition
Photo	See Photo
Spindle's diameter : 100mm Max diameter with facing work : 1250mm Max diameter with chuck's drilling : 630mm Drilling depth : 900mm Faceplate's diameter : 680mm Distance between spindle and clamping surface : 1200mm Max distance between faceplate and rest : 3000mm

155

ID	MA31250
Make	TOS
Model	W100A
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle size : 100 mm X-Axis : 1600 mm Y-Axis : 1120 mm Z-Axis : 1250 mm W-Axis : 900 mm Table size : 1250x1250 mm Facing chuck diameter : 600 mm Max facing diameter : 900 mm Facing chuck speed range : 7.1 - 224 rpm

156

ID	MA31155
Make	SKODA
Model	W200H
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter - 200mm Spindle cone - 120 Frame height - 550mm Slides width - 2000mm Table size - 2000 x 2000mm Max. table load - 25000kg Quill dimensions - 450 x 450mm Spindle travel (Z) (boring depth) - 2000mm Quill travel (W) - 1600mm Spindle head movement (Y) - 3150mm Column movement (X) - 10000mm Machine dimensions, mm 5900 x 13800 x 8270 Machine weight, kg 84000

157

ID	MA31110
Make	TOS
Model	WH 63
YOM	2008
Condition	Good Condition
Photo	See Photo
Spindle diameter - 63mm X travel - 1000mm Y travel - 710mm Z travel - 1000mm Dimensions - 4050x2100x2280mm Weight - 7600kg

158

ID	MA31099
Make	TOS
Model	W100
YOM	1966
Condition	Good working condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

159

ID	MA31098
Make	TOS
Model	W100
YOM	1968
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

160

ID	MI6952
Make	Juaristi
Model
YOM
Condition	Good Condition
Photo	See Photo
Make : JUARISTI Country of Origin : SPAIN Table size : 1150 x 1050 mm Spindle Dia : 80 mm Travels : 1050 x 1000 x 1600 mm approx With DRO ( working ) Facing chuck available ( Not in use )

161

ID	MA30869
Make
Model	TOS W100
YOM	1966
Condition	Good Condition
Photo	See Photo
Model : TOS W100 Spindle diameter: 100 mm Rotary Table: 1 250 x 1 250 mm Spindle speeds range: 7.1 - 1120 rpm Cross table travel: 1 250 mm Longitudinal table travel: 1 600 mm Vertical travel: 1 120 mm Spindle taper: Morse 6 Planning Shield : 600 mm Planning Shield Speeds: 7,1-224 rpm Max. weight of workpiece: 3000 kg Main motor power: 10 W Dimensions: 3000 x 6015 x 3000 mm Weight of machine: 15 500 kg

162

ID	MA30814
Make
Model
YOM
Condition
Photo	See Photo
Horizontal boring machine UNION BFT 110/6 Made in: Germany Manufacturer: WMW UNION Spindle diameter: 110 mm X-travel: 2000 mm Y-travel: 1600 mm Z-travel: 2000 mm Table size: 1400x1600 mm� Table rotation: 360 degrees Max work-piece weight: 10000 kg Spindle speeds range: 5.6 - 1120 rpm Tool taper: ISO 50 Quill Stroke: 800 mm Main motor power: 40 kW Dimensions: 7000x4700x4400 mm Machine weight: 28000 kg .Ball Screw on all Axes

163

ID	MA30670
Make	TOS
Model	WHN 13 A
YOM
Condition
Photo	See Photo \| See Video
spindle dia.: 130 mm - x axis: 2000 mm - y axis: 2000 mm - z axis: 800 mm - w axis: 1250 mm - table: 1800 x 1800 mm - weight: 32000 kg Equipment: 1. Facing chuck 2. Vertical head 3. tool holders approx. 20-30 Retrofited: 1. New motors on all axis 2. New linear encoders 3. New electrical cabinet

164

ID	MA30598
Make	TOS
Model	W100
YOM
Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020x3000x3500 Weight: 16000 kg

165

ID	MA30530
Make	Defum Poland
Model	ADS115
YOM	1977
Condition	Excellent
Photo	See Photo
Spindel 115mm Table 1600 x 1800mm X 2000mm, Y 2000mm, Z 2000mm 3 -axis DRO

166

ID	MA30462
Make	Russian
Model	2A622F1
YOM
Condition	Good Condition
Photo	See Photo
The machines 2A6622F is intended for milling of planes, grooves, ledges, drilling, reaming and countersinking centromania holes, boring and deployment of holes, threading taps, turning surface the machining of circumferential grooves and trimming ends The retractable spindle diameter: 110 mm, Dimensions of table working surface: 1120 x 1250 mm, The largest displacement Head stock: 1000 mm, Table along the: 1000 mm, Table breadth: 1250 mm, Spindle: 710 mm, Caliper face plate: 160 mm, The limits of speed sliding spindle: 10-1250 Rev/min, The largest recommended diameter rascacielos hole: 320 mm, Power of main electric motor: 11 kw, Max weight of work piece: 4000 kg, Machine overall dimensions: The length of: 6100 mm, width: 3950 mm, The altitude of: 3200 mm, Weight of machine (without electrical cabinet): 17000 kg

167

ID	MA30428
Make	Sverdlovsk,Russia
Model	2A620-1
YOM
Condition	Excellent condition,under power
Photo	See Photo
Spindle diameter: 90 mm, Table effective area: 1120 x 1250 mm, Max. work piece weight: 3000 kg, Spindle speed range, rpm 12,5...1600 Chuck speed range, rpm 8...200 Movement of axis Y/W/Z/X/U: 1000/710/1120/1000/170 mm, Main electric motor power: 7,5 Kw Spindle taper Morse 5 Machine weight: 12500 kg

168

ID	MI6737
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
Bed : 1130 X 900, Travel : 1 X 2 X 1.4 m, Spindle : 50 mm.

169

ID	MA30337
Make	TOS
Model	WD130/3200
YOM
Condition	Good Condition
Photo	See Photo
Work spindle diameter 130 mm Taper in spindle ISO 50 Extension of working spindle 1120 mm Ejecting the spindle 450 mm Vertical movement of head on stand 1800 mm Lateral movement of the rack on the bed: normally 3200 mm Min distance from spindle axis clamping plate 400 mm Horizontal headstock: 1st number continuously in the range of 200-100 mm min-1 2nd number continuously in the range of 20-1000 mm min-1 min rapid traverse 1000 mm-1 Displacements of spindle headstock and stand: 1st number continuously in the range of 400-200 mm min-1 2nd number continuously in the range of 40-2000 mm min-1 min rapid traverse 2000 mm-1 Motor for spindle drive 14kW Max. torque to the hollow spindle 80000 kpcm (7850 Nm) Electric hydraulic system 7.5 kW Machine height 4650 mm Machine Weight 25,000 kg

170

ID	MA30286
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm, X axis: 1600 mm, Y axis: 1120 mm, Z axis: 1250 mm, W axis: 900 mm, Table size: 1250 x 1250 mm, Max table load: 3 ton, Max facing diameter: 900 mm, Total power: 15 kW, Dimensions: 6020 x 3000 x 3500 mm, Weight: 16000 kg. The machine is equipped with face plate and tailstock

171

ID	MA30284
Make	Russian
Model	2636G
YOM	1970-s
Condition	Good Condition
Photo	See Photo
Boring diameter: 125 mm, Table: 1800 x 1600 mm, Dimensions: 6960 x 5070 x 4805 mm, Weight: 32500 kg.

172

ID	MA30257
Make	Russian
Model	2622B
YOM	1966
Condition	Good Condition
Photo	See Photo
Spindle's diameter - 110 mm Spindle's X travel - 710 mm Spindle's rotations - 12,5...1250 rpm Rotary table - 3000 mm Rotary table's capacity - 3000 kg Dimensions - 5300 x 3400 x 1000 mm Weight - 12200 kg

173

ID	MA30206
Make	Tos Czech
Model	W100A
YOM	1987
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm Spindle speed: 7-1120 rpm Spindle Taper: ISO 50 X-Axis: 1600 mm , Y-Axis: 1120 mm, Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250 x 1250 mm Table type: rotary Max work-piece weight: 3000 kg Facing chuck: 600 mm Feeds for boring (32 stages): 0,02-12 mm/rev Feeds for milling (18 stages): 18-900 mm/min Rapid traverse (spindle stroke, headstock and table): 2800 mm/min Thread cutting range (18 stages; metric): 0,25-12 mm Total power consumption: 15 kVA Dimension: 6020 x 3000 x 3500 Weight: 14000 kg

174

ID	MA30121
Make	Collet & Engelhardt
Model	BF85-II
YOM
Condition	Good Condition
Photo	See Photo
Table: 1350 x 1000 mm Transverse travel: 1700 mm

175

ID	MA29895
Make	WMW Union ,Germany
Model	BFT90/3-2
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 90 mm, X travel: 1000 mm, Y travel: 1000 mm, Z travel: 940 mm, W travel: 710 mm, Table : 1000 x 1120 mm, Weight of the machine: 8350 kg.

176

ID	MA29890
Make	WMW Union ,Germany
Model	BFT125
YOM	1974
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, WORKING RANGE -MILLING - X-axis travel : 2400 mm, Y-axis travel : 1600 mm, Z-axis travel : 1250 mm, W-axis travel : 800 mm, TABLE :- Table surface (left-right) : 1600 mm, Table surface (front-back) : 1400 mm, Workpiece load (max) : 6300 kg, Rotation :360�, WORKING SPINDLE / HEAD :- Spindle type horizontal, Spindle revolutions (min) : 3 /min, Spindle revolutions (max) : 710 /min, Tool fixture : ISO SK 50, Drive power (max) : 30 kW, FACING PLATE (BORING MILL) :- Facing plate diameter : 785 mm, DIMENSIONS / WEIGHTS :- Space requirements length : 5800 mm, Space requirements width : 6700 mm, Total height : 4000 mm, Total weight approx : 30000 kg. DRO Heidenhain.

177

ID	MA29801
Make	WMW Union ,Germany
Model	BFT125/5
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 125 mm Table size: 1600x1400 mm Taper MK VI Face plate/stroke of spindle: 800 mm Rev: 3,55-560 rev/min Face plate rev.: 3,55-140 rev/min Spindle feeds: 0,03-36 mm Table feeds: 0,15-7,2 mm/min Distance table - spindle: 20/1580 mm Total power: 30 kW Weight: ca. 33.7 t Dimensions: ca. 5x4,35x4,4 (length x width x height) incl. 3-axis-Digital-Read-Out TRAK.103 Faceplate Guideway convers Swiveling instruction panel several tools

178

ID	MI6582
Make	Wotan,West German
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 130 mm, Travel X : 3000 mm, Travel Y : 1200 mm, Travel Z : 1000 mm, Bed size : 3500 x 1750 mm, DRO in all axis.

179

ID	MI6578
Make	Titan Romania
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 85 mm, Travel X axis : 1800 mm, Travel Y axis : 1100 mm, Travel Z axis : 1500 mm, Table size : 1100 x 1300 mm.

180

ID	MI6576
Make	Lazzati,Italy
Model	HB115
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia : 115 mm, Travel X-3100 mm, Y-2000 mm, Z- 2000 mm, With 3 axis DRO, Spindle size : 115 mm, Taper-ISO 50, Spindle Speed : 0-1280 RPM, with Rotary Table size : 200 X 1500 mm, With VFD DC drive, With Facing Chuck dia. 800 mm, With Universal boring and milling head.

181

ID	MA29645
Make	Scharmann
Model	Ecocut1
YOM	1988
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, X-axis travel : 12,000 mm, Y-axis travel : 1,600 mm, Z-axis travel : 800 mm, W-axis travel : 600 mm, Spindle speed : 12 ~ 3,500 rpm, Main Drive power at spindle end : 30 kW, Feed rate(X, Y, Z) : 1 ~ 12,000 mm/min, Feed rate(W) : 1 ~ 6,000 mm/min, Automatic Tool Changer : 60 pockets, Control system : Siemens 850D.

182

ID	MA29627
Make	Tos Czech
Model	W100
YOM	1966
Condition	Good working condition
Photo	See Photo
Spindle size : 100 mm, X-Axis : 1600 mm, Y-Axis : 1120 mm, Z-Axis : 1250 mm, W-Axis : 900 mm, Table size : 1250 x 1250 mm, Max table load : 3 ton, Max facing diameter : 900 mm, Total power : 15 kW, Dimension : 6020 x 3000 x 3500, Weight : 16000 kg.

183

ID	MI6532
Make	Ceruti
Model	A90
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter : 90 mm, Table Size : 1400 mm X 1200 mm, Travels :- X (Cross) : 1400 mm, Z (Longitudinal) : 2000 mm, Y (Vertical) : 1100 mm. Equipped with Tailstock & Facing chuck.

184

ID	MI6531
Make	ReTOS; Varnsdorf
Model	H63A
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 63 mm, Table size : 800 X 890 mm, Travels X : 1000 mm, Travel Y : 1200 mm, Travel Z : 1000 mm, Equipped with Heidenhain D.R.O.

185

ID	MA29485
Make	Tos Czech
Model	WHN9B
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter: 90 mm, X travel: 1250 mm, Y travel: 900 mm, Z travel: 1000 mm, Table: 1000 x 1120 mm, Dimensions: 4180 x 2300 x 2690 mm, Weight: 12000 kg

186

ID	MA29472
Make	Toshiba Japan
Model	BTD11E-R13
YOM	1994
Condition	Good Condition
Photo	See Photo
Table size: 1250 x 1120 mm, BT50, ATC40

187

ID	MA29415
Make	Tos ,Varnsdorf
Model	W100A
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm

188

ID	MA29377
Make	Tos Czech
Model	W100
YOM	1967
Condition	Good Condition
Photo	See Photo
Spindle size : 100 mm, X-Axis : 1600 mm, Y-Axis : 1120 mm, Z-Axis : 1250 mm, W-Axis : 900 mm, Table size : 1250 x 1250 mm, Max table load : 3 ton, Max facing diameter : 900 mm, Total power : 15 kW, Dimension : 6020 x 3000 x 3500, Weight : 16000 kg.

189

ID	MI6464
Make	Pegard
Model
YOM
Condition	Good Condition
Photo	See Photo
Horizontal boring machine : 75mm, Spindle with facing chuk.

190

ID	MI6463
Make	Karam,Indian
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 100 mm.

191

ID	MA29359
Make	Tos ,Varnsdorf
Model	WHN9B
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle's diameter - 90 mm, X travel - 1250 mm, Y travel - 900 mm, Z travel - 1000 mm, Table - 1000 x 1120 mm, Dimensions - 4180 x 2300 x 2690 mm, Weight - 12000 kg

192

ID	MA29343
Make	Tos ,Varnsdorf
Model	W100
YOM	1975
Condition	Good Condition
Photo	See Photo
Tailstock is available. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250 x 1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020 x 3000 x 3500 Weight: 16000 kg

193

ID	MA29341
Make	Tos ,Varnsdorf
Model	W100
YOM	1967
Condition	Good Condition
Photo	See Photo
Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250 x 1250 mm Max table load: 3 ton Max facing diameter: 900 mm Total power: 15 kW Dimension: 6020 x 3000 x 3500 Weight: 16000 kg

194

ID	MA29340
Make	Tos Czech
Model	W100A
YOM	1982
Condition	Good Condition
Photo	See Photo
There�s no back column. Mechanical tolls clamping device. Spindle size: 100 mm X-Axis: 1600 mm Y-Axis: 1120 mm Z-Axis: 1250 mm W-Axis: 900 mm Table size: 1250x1250 mm Facing chuck diameter: 600 mm Max facing diameter: 900 mm Facing chuck speed range: 7.1 - 224 rpm

195

ID	MA29319
Make	Russian
Model	2A620-2
YOM	1989
Condition	Good Condition
Photo	See Photo
Boring diameter : 90 mm, Table : 1250 x 1250 mm, Main motor power : 15 kW, Spindle rotations : 10..1600 rpm, Dimensions : 7600 x 3730 x 3220 mm, Weight : 17000 kg. Equipped with ball-screws.

196

ID	MA29296
Make	Tos ,Varnsdorf
Model	WHN13
YOM	1982
Condition	Good Condition
Photo	See Photo
Spindles diameter : 130 mm, X travel : 3500 mm, Y travel : 2000 mm, Z travel : 1250 mm, W travel : 800 mm, Table : 1800 x 1800 mm, Weight : 36000 kg.

197

ID	MA29212
Make	Tos Czech
Model	W100
YOM	1982
Condition	Good Condition
Photo	See Photo
Spindle size : 100 mm, X-Axis : 1600 mm, Y-Axis : 1120 mm, Z-Axis : 1250 mm, W-Axis : 900 mm, Table size : 1250 x 1250 mm, Max table load : 3 ton, Max facing diameter : 900 mm, Total power : 15 kW, Dimension : 6020 x 3000 x 3500, Weight : 16000 kg.

198

ID	MA29190
Make	Tos ,Varnsdorf
Model	WHN9A
YOM	1974
Condition	Good Condition
Photo	See Photo
Spindle diameter: 90 mm, Spindle (W) travel: 680 mm, X-Y-Z travel: 1250 x 900 x 1000 mm, Table: 1000 x 1100 mm, Weight: 12 tons.

199

ID	MI6383
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Table: 1120 x 900 mm, Long travel: 1250 mm, Adaption: MT5, Facing chuck dia: 500

200

ID	MI6382
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Line Boring machine, Center height: 14 inch, Bed length: 4 feet, Gear motor: 5 HP,1440 RPM

201

ID	MI6381
Make	WMW Union ,Germany
Model	Unused
YOM
Condition	Good Condition
Photo	See Photo
Spindle with line boring support: 80 mm, Spindle adaption MT-5 with cotter slot, Table size: 1200 x 1200 mm, Cross travel: 1200 mm, Vertical travel: 925, Longitude travel: 1170 mm, With coolant arrangement, Machine weight: 10 tons, Accessories: Boring bar adapter (2 nos), 2 gears.

202

ID	MI6380
Make	Uma
Model	BF56
YOM
Condition	Good Condition
Photo	See Photo
Table size: 560 x 450 mm, Cross travel: 500 mm, Long travel: 1000 mm, Vertical travel: 650 mm, Spindle adaption: ISo 40, Motor: 3 HP, Accessories: Vertical universal tilting attachment ISO 40 with quill, Movement line boring bars: ISO 40 adapter.

203

ID	MI6379
Make	Ayce
Model	60
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 60 mm, Table size: 670 x 1000 mm, Vertical travel: 750 mm, Longitude travel: 1400 , MT4 Adaption, Spindle travel: 400 mm, Motor: 5 HP, Accessories: With fix facing chuck: Dia 380 mm.

204

ID	MA29061
Make	WMW Union ,Germany
Model	BFT90/3
YOM	1985
Condition	Good Condition
Photo	See Photo
Spindle dia: 90 mm, Spindle travel (W): 710 mm, Y axis: 1000 mm, Z axis: 1600 mm, X axis: 1000 mm, B axis: 360 degrees, Table size: 1000 x 1120 mm, Max. work piece weight: 2500 kg, Spindle speed range: 8...1600 rpm, Total power required: 23 kW, Machine weight: 8700 kg.

205

ID	MA28935
Make	Forest Line
Model	F300LN
YOM	1978
Condition	Good Condition
Photo	See Photo
Spindle dia: 300 mm, X travel:13500 mm, Y travel:5000 mm, Z travel: 1600 mm, Rotary table:5000 x 5000 mm

206

ID	MA28908
Make	WMW Union ,Germany
Model	BFT90/3-1
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle dia: 90 mm, Table size:1000 x 1200 mm, Spindle travel:710 mm, Travel Y/X/Z:1000/1600/1000 mm, Max. work piece weight:25000 H, Overall consumed power:27 kW, Weight:8225 kg.

207

ID	MI6345
Make	Tos Czech
Model	FKH50
YOM
Condition	Good Condition
Photo	See Photo
Clamping dimensions of table:1850 x 800 mm, Longitudinal stroke (X):1200 mm, Vertical stroke (Z):500 mm, Cross stroke (Y): 450 mm, Clapming taper in spindle : main motor Output:14.8 kW, Dimensions L x W x H : 3420 x 4120 x 3640 mm, Machine weight: 8000 kgs approx.

208

ID	MI6335
Make	HMT,India
Model
YOM
Condition	Good condition,under power
Photo	See Photo
Spindle dia: 110 mm, Table movement X axis:1500 mm, Machine column travel Y axis:1200 mm, Table movement Z axis:1400 mm, Spindle taper:ISO 50, Spindle travel:600 mm, Speeds:0-1500 rpm, Built in rotary table size:1200 x 900 mm, Table indexing:360 degree, Table load:5 tons.

209

ID	MI6321
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle size : 100 mm, Spindle speeds : 7.1-1120 rpm, Spindle taper : ISO 50, X-Axis : 1600 mm, Y-Axis : 1120 mm, Z-Axis : 1250 mm, W-Axis : 900 mm, Table size : 1250 x 1250 mm, Max table load : 3 ton, Table type : rotary, Facing chuck diameter : 600 mm, Slide.

210

ID	MA28518
Make	Tos Czech
Model	W100
YOM	1970
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, Taper in spindle: CM6, Facing head: 600 mm, Table travel cross X axis: 1600 mm, Spindle travel Z axis: 900 mm, Vertical head stock travel Y axis: 1200 mm, Table size: 1250 x 1250 mm - Rotative table, Spindle exit: 900 mm, Spindel speeds: from 7 to 1120 RPM, Tension: 380 V, Dimensions (L x W x H): 6000 x 2800 x 3000 mm, Weight: 16 ton

211

ID	MA28420
Make	WMW Union ,Germany
Model	BFT100/6
YOM	1979
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, Table travel X axis cross: 2000 mm, Table travel along Z axis: 1600 mm, Vertical adjustment Y axis: 1600 mm, Table dimensions: 1600 x 1400 mm, Spindle : Cone ISO 50, Power: 15 KW, Weight: 28 ton.

212

ID	MA28393
Make	Tos Czech
Model	W100A
YOM	1986
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, Travels X : 1600 mm, Y : 1120 mm, Z : 1200 mm, Table : 1250 x 1250 mm, Spindle : ISO 50, With DRO, With Facing chuck.

213

ID	MI6263
Make	WMW Union ,Germany
Model	BFT80/2
YOM
Condition	Good working condition
Photo	See Photo
Spindle dia : 80 mm, Cross travel :1200 mm.

214

ID	MA28109
Make	Tos ,Varnsdorf
Model	WHN13.8
YOM
Condition	working condition ,under power
Photo	See Photo
Spindle diameter: 130 mm, X travel: 3500 mm, Y travel: 2000 mm, Z axis: 1250 mm, W axis(spindle longitudinal): 800 mm, Table size: 1800 x 1800 mm, Spindle head stock drive: 55/37 kW, Total power requirement: 80 kW, Spindle taper: ISO 50, Weight of the machine ca.: 36 ton.

215

ID	MA28098
Make	WMW Union ,Germany
Model	BFT130/6
YOM	1978/Retrofit 2010
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm, X axis: 2240 mm, Y axis: 1600 mm, Z axis: 2000 mm, Table size: 1600 x 1400 mm, Main drive power: 40 kW, Table capacity: 10,000 kgs, Spindle speed: 08-900 rpm, Facing head diameter: 785 mm, Boring diameter max: 1400 mm, Space requirement: 7000 x 4700 x 4400 mm

216

ID	MA28051
Make	Tos Czech
Model	W100A
YOM
Condition	Good working condition
Photo	See Photo
Spindle dia: 100 mm, X travel: 1600 mm, Y travel: 1250 mm, Z travel: 1600 mm, W travel: 800 mm, With hardened guideways.

217

ID	MI6242
Make	WMW Union ,Germany
Model	BFT90/3
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter: 90 mm, Table Size: 1000 mm X 1120 mm, Cross Travel (X): 1250 mm, longitudinal Travel (Z): 1600 mm, Vertical travel (Y): 1000 mm, Spindle Movement (W): 710 mm, with Facing Chuck.

218

ID	MI6240
Make	Tos Czech
Model	W100A
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, X travel: 1600 mm, Y travel: 1250 mm, Z travel: 1500 mm, W travel (spindle): 900 mm, Chuck dia: 600 mm, spindle taper: BT50, With facing chuck.

219

ID	MI6235
Make	Bragonzi
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 130 mm, X travel: 2500 mm, Y travel: 2000 mm, Table size: 1800 x 1400 mm, Spindle taper: ISO 50, With DRO

220

ID	MI6234
Make	Tos Czech
Model	H80
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 80 mm, X travel: 1000 mm, Y travel: 1000 mm.

221

ID	MA28035
Make	Tos ,Varnsdorf
Model	W100
YOM	1966
Condition	Good working condition
Photo	See Photo
Spindle dia : 100 mm X / Y / Z travel : 1600/1250/1600 Table size : 1250 x 1250 mm With Facing Chuck & Tailstock.

222

ID	MI6231
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 80 mm, Travel X axis : 1000 mm, Travel Y axis : 900 mm, Table size : 1000 x 800 mm, With facing chuck.

223

ID	MI6230
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 80 mm, Travel X axis : 1000 mm, Travel Y axis : 900 mm, Table size : 1100 x 1000 mm, With facing chuck.

224

ID	MI6228
Make	VWF Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, Cross: 1800 mm, Vertical : 1400 mm, Longitudal: 2.5 meters, Spindle taper : ISO 50, With Hardened Guideways, With Toolings, On foundation no tailstock

225

ID	MI6226
Make	WMW Union ,Germany
Model	BFT80/2
YOM
Condition	Under power
Photo	See Photo
Spindle size : 80 mm, Y travel : 1000 mm, Table size: 1100 mm x 1250 mm.

226

ID	MA28021
Make	Tos Czech
Model	W100
YOM	1975
Condition	Good Condition
Photo	See Photo
Working spindle diameter : 100 mm, Max boring diameter : 560 mm, Max and min distance of center line of spindle from the table Y : 0-1120 mm, Max drilling depth at one feeding W : 900 mm, Max distance between faceplate and work rest : 2800 mm, Faceplate diameter : 600 mm, Depth of centering diameter of faceplate : 8 mm, Max diameter at processing by tool post slide : 900 mm, Table : 1250 x 1250 mm, With Facing chuck & Tailstock.

227

ID	MI6225
Make	WMW Union ,Germany
Model	BFT80/2
YOM
Condition	Good Condition
Photo	See Photo
Spindle size : 80 mm, Longitudinal travel of table : 1600 mm, Cross table travel : 1600 mm, Vertical travel of head : 1200 mm, Spindle travel : 711 mm, Table size (L x W) : 1400 mm x 1250 mm Spindle speed range : 8-1250 rpm, Main motor power : 10 hp, Power supply : 415 volts / 50 hz / 3 phase, Freighting details (L x D x H) : 5300 mm x 3000 mm x 2700 mm 42.9 cubes, Weight (approx) : 12500 kg. With Facing Chuck, Side Supports, Hardened Bed.

228

ID	MA27977
Make	WMW Union ,Germany
Model	BFT125/5
YOM	1988
Condition	Good Condition
Photo	See Photo
Spindle diameter: 125 mm, Table: 1400 x 1600 mm, Table travelling : longitudinal 2000 mm, Cross 1600 mm, Headstock vertical travel: 1600 mm, Spindle travel distance: 910 mm, Spindle taper metric: 80, Digital read out: 3 axis.

229

ID	MA27966
Make	Juaristi
Model	MDR125CF
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia: 125 mm, Taper: ISO50, 24 Speeds: 5 - 1000 RPM, Max. boring diameter: 800 mm, Rotary Table Surface: 1700 x 2000 mm, Vertical travel: 2.500 mm, Longitudinal travel: 2600 mm, Cross travel: 3000 mm, Maximum load on the table: 8000 kgs, Feeds 27 automatic feeds: 0,025-10 mm/rev, Fast Feeds Fast feeds: 2500 mm/min, Rotation of the table: 0,8 RPM, Main motor power: 25 CV, Fast feeds motor power: 7,5 CV, Machine weight: 34 tons, Accesories Digital in 3 axis, Facing head, Universal head.

230

ID	MA27761
Make	WMW Union ,Germany
Model	BFT125/5
YOM	1972
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, Travel X axis : 1600 mm, Travel Y axis : 1600 mm, Travel Z : 1120 mm, Chuck diameter : 785 mm, Maximum diameter facing : 1400 mm, Taper in spindle : 80 mm, Maximum diameter drilling chucking : 800 mm, Maximum diameter of the turning chuck without : 1400 mm, Table size : 1400 x 1600 mm.

231

ID	MI6174
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 80 mm, With Facing Chuck. with tail stroke.

232

ID	MA27495
Make	Tos Czech
Model	W100A
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle dia: 100 mm, X travel : 1600 mm, Y travel : 1250 mm, Z travel : 1600 mm, With havdenend guideways, With Facing chuck and tailstock.

233

ID	MA27415
Make	WMW Union ,Germany
Model	BFT100/III
YOM	1962
Condition	Good working condition
Photo	See Photo
Spindle dia: 100 mm, X travel: 1250 mm, Y travel: 1200 mm, Table size: 1120 x 1250 mm, Longitudinal travel: 3000 mm, With facing chuck

234

ID	MI6130
Make	WMW Union ,Germany
Model	BFT125
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, Vertical travel : 2000 mm, Cross travel : 1800 mm.

235

ID	MA27301
Make	WMW Union ,Germany
Model	BFT125/5
YOM	1976
Condition	Good Condition
Photo	See Photo
Spindle dia: 125 mm, X travel : 1600 mm, Y travel: 1600 mm (vertical travel), Z travel: 3725 mm, W travel: 800 mm (Spindle stroke), Tool taper: IS 50, Table size: 1800 x 2000 mm (G.Overhauld in 2009), Max. load : 12.5 tons, Face chuck dia: 785 mm, Machine weight: approx.32 tons, With DRO new in 2010

236

ID	MA27174
Make	Tos Czech
Model	H100A
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 100 mm, With faceplate.

237

ID	MA27117
Make	Tos Czech
Model	W100
YOM	1965
Condition	Good Condition
Photo	See Photo
Spindle diameter : 100 mm, With Facing Chuck.

238

ID	MA27080
Make	WMW Union ,Germany
Model	BFT110/6
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 110 mm, X travel : 1940 mm, Y travel : 1250 mm, Z travel with/without rest : 1240 mm/1490 mm, Table : 1250 x 1400 mm.

239

ID	MI6074
Make	HMT,India
Model	AZ11
YOM
Condition	excellent working condition
Photo	See Photo
Spindle diameter : 110 mm, Travel X axis : 1600 mm, Travel Y axis : 1200 mm, Travel Z axis : 1400 mm, Table size : 1200 x 900 mm, Max pallet load : 4000 kg, Work swing dia : 1600 max, Spindle taper : ISO 50, Spindle speed RPM : 63 min - 1100 max, Spindle : 12 kW, Accuracy : 0.05 mm, Machine reading digital read out, Qty : 2 nos.

240

ID	MI6073
Make	Pegard
Model
YOM
Condition	excellent working condition
Photo	See Photo
Spindle diameter : 110 mm, Travel X axis : 1600 mm, Travel Y axis : 1200 mm, Travel Z axis : 1400 mm, Table size : 1200 x 1200 mm, Max pallet load : 4000 kg, Work swing dia : 1600 max, Spindle taper : ISO 50, Spindle speed RPM : 63 min - 1100 max, Spindle : 12 kW,

241

ID	MA27025
Make	Juaristi
Model	MDR125CF
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, Cross travel X : 2000 mm, Vertical travel Z : 2100 mm, Longitudinal travel Y : 2100 mm, Spindle stroke : 800 mm, 24 speeds : 5-1000 rpm, Table surface : 1.525 x 1700 mm, Max load on the table : 8000 kg, Travel long table with rest : 1600 mm, Rapid feeds : 2500 mm, Power main motor : 25 CV. Universal head type huron, Spindle support, Steady rest, Face Plate, 2 Angle plates, DRO 3 axes, Metal covers in transversal, Tools, Ballscrew in 3 axes, Automatic turn table.

242

ID	MA26979
Make	WMW Union ,Germany
Model	BFT90/3
YOM	1987
Condition	Good Condition
Photo	See Photo
Spindle diameter : 90 mm, Travel X axis : 1000 mm, Travel Y axis : 1200 mm, Travel Z axis : 1400 mm, 3 Axis heidenhain DRO, Plateau area, With Universal head, Bezel, 3 door tools.

243

ID	MA26952
Make	Tos ,Varnsdorf
Model	W9A
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle dia : 90 mm, Spindle taper : 5, Table size : 1200 x 1120 mm, With face plate and tailstock.

244

ID	MA26906
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 80 mm.

245

ID	MI6040
Make	Tos Czech
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 90 mm, With face plate and tail stock.

246

ID	MA26822
Make	Juaristi
Model	110
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 110 mm, X travel : 2000 mm, Y (vertical) : 1600 mm, Z travel : 2400 mm, Table area : 1500 x 1250 mm, Spindle traverse : 800 mm, Spindle speeds : 18-14-10000 RPM, Rotary table : 360 deg, Max. weight on table : 4000 KG, with milling head, Tailstock, Fagor DRO, Motor : 15 CV/HP, Weight : 10,000 KG.

247

ID	MA26807
Make	Tos ,Varnsdorf
Model	W100
YOM	1970
Condition	Good Condition
Photo	See Photo
Spindle diameter : 100 mm, With face plate.

248

ID	MA26699
Make	Tos Czech
Model	W100A
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle diameter : 100 mm, With Facing Chuck.

249

ID	MA26634
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 100 mm, X travel : 1600 mm, Y travel : 1120 mm, Z travel : 810 mm, W travel : 900 mm, U travel : 215 mm, Boring diameter with face plate : 900 mm, Rotary table size : 1250 x 1250 mm, Work piece weight : 3 tons, Equipped with back rest.

250

ID	MA26620
Make	Scharmann
Model	FB80
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 85 mm, Travel X axis : 1300 mm, Travel Y axis : 800 mm, Travel Z axis : 1650 mm, Speed : 15-885 u/min, Space : 4 x 250 mm, Height : 2.7 mm, Clamping surface : 1000 x 800 mm.

251

ID	MA26611
Make	Nomura
Model
YOM	1981
Condition	Good Condition
Photo	See Photo
Spindle diameter : 100 mm, Travel X axis : 2000 mm, Travel Y axis : 1500 mm, Travel Z axis : 1500 mm, Rotary table size : 1400 x 1600 mm, DRO for 3 axes, Face plate.

252

ID	MA26605
Make	Ceruti
Model	AC100
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 105 mm, Travel X axis : 1250 mm, Travel Y axis : 1200 mm, Travel Z axis : 1250 mm, Spindle stroke : 850 mm, Speed number : 12-1200 rpm, Main motor : 20 cv, Table surface : 1100 x 1450 mm, Loading capacity : 5000 kg, DRO Fagor 2 axis, Machine Weight : 13800 kg.

253

ID	MA26573
Make	WMW Union ,Germany
Model	BFT100
YOM	1963 Recondition 2007
Condition	Good Condition
Photo	See Photo \| See Video
Spindle dia : 100 Travel X/Y/Z : 1600 / 1200 / 600 mm, Table size : 1400 x 1200 mm, The machine without tailstock.

254

ID	MA26562
Make	Ceruti
Model	AC100
YOM
Condition	Good condition,under power
Photo	See Photo
Spindle diameter : 100 mm.

255

ID	MA26552
Make	Pegard
Model
YOM	1980 Overhauled 2012
Condition	Good Condition
Photo	See Photo
Spindle dia: : 130 mm, X travel : 6000 mm, Y travel : 2000 mm, Z travel : 3000 mm, W travel : 800 mm, Spindle taper : 50 ISO, Table size : 2000 x 1420 mm, Table load : 15 tons, Motor power : 24 kw, Siemens Motors.

256

ID	MA26500
Make	Tos Czech
Model	W100A
YOM	1997
Condition	Good Condition
Photo	See Photo
Spindle diameter : 100 mm.

257

ID	MA26461
Make	Sacem
Model	MST110
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 110 mm, Cross travel X axis : 2000 mm, Vertical travel Y axis : 1600 mm, Longitudinal travel Z axis : 1100 mm, Spindle stroke W : 1100 mm, Max rpm of the spindle : 1000 rpm, Main motor : 25 CV, Table surface : 1400 x 1600 mm, Max load on table : 8000 kg.

258

ID	MA26450
Make	Ceruti
Model	AC100
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 100 mm, Tailstock, Facing.

259

ID	MA26446
Make	Juaristi
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 110 mm, The machine has D.R.O., With tail stock, tooling.

260

ID	MA26434
Make	Juaristi
Model	MDR110CF
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 110 mm, Spindle taper : ISO 50, Spindle travel : 800 mm, Boring max diameter : 600 mm, Number of spindle speeds ; 21 (motor 1.440 rpm) from 7 to 1.000 rpm, Cross table travel : 2000 mm, Longitudinal table travel : 2000 mm, Vertical travel : 1500 mm, Rotary table useful dimensions : 1510 x 1220 mm, Max. load on rotary table : 4000 Kgs, Rapid feeds for main axe and vertical : 1800 mm/min, Rapid feeds for table , longitudinal and cross movement : 1800 mm/min, Table turning rapid feed : 2 rev/min, Aprox. net weight : 10000 Kgs, Main motor power : 15 HP.

261

ID	MA26325
Make	Juaristi
Model
YOM
Condition	working condition ,under power
Photo	See Photo
Spindle diameter : 110 mm, Travel : X : 2000 mm, Y : 1800 mm, Z : 1800 mm, Table surface : 1500 x 1500 mm, Loading capacity : 4 tons, ISO 50, Conventional machine, DRO, Head huron type, Tailstock,

262

ID	MA26232
Make	Juaristi
Model	MDR110/125CF
YOM	1986
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, X travel : 2000 mm, Y travel : 1500 mm, Z travel : 1225 mm, W travel : 800 mm, Spindle nose : ISO 50, Spindle speeds : 7-1000 omw.min, Turning table : 360 deg turning, Table size : 1400 x 1525 mm, Table load : 6000 kg, Overall Dimensions (LxWxH) : 5120 x 4000 x 4200 mm, All 3 Axis are with Ballscrews, With Milling head & toolings, With Complete manuals.

263

ID	MA26210
Make	WMW Union ,Germany
Model	BFT125
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, Cross travel : 1600 mm, Vertical travel : 1500 mm, Longitudinal travel : 2000 mm, Table size : 1600 x 1900 mm, Machine weight : 24 Tons.

264

ID	MI5867
Make	Tos Czech
Model	WH63
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 63 mm, Table size : 800 X 890 mm, X : 1000 mm, Y 800 mm, Z : 1500 mm, Facing chuck : 450 mm Machine is with TAIL STOCK and FACING CHUCK.

265

ID	MA26186
Make	Tos Czech
Model	W100
YOM	1967/1983
Condition	Excellent condition,under power
Photo	See Photo
Spindle dia : 100 mm, Table dimension : 1250 x 1250 mm, Speed range : 7-1120 min-1, Max. work piece weight : 3000 kg, Machine dimension : 6015 x 3000 x 3000 mm, machine weight : 17500 kg, Upgrade : NEWELL DP8 digital measuring system for axes X.Y.Z1 and Z2, Accessories: With supporting bearing stand with electric motor clamping, With support of spindle . optical device for setting table.

266

ID	MA26183
Make	Wotan,West German
Model
YOM	1985 Retrofitted 2002
Condition	Very good condition
Photo	See Photo
Spindle dia : 110 mm, Travel X axis : 1800 mm, Travel Y axis : 1600 mm, Travel W axis : 2300 mm, Table : 1700 x 1500 mm, Speed : 1000 RPM, Machine with new facing chuck and tailstock.

267

ID	MA26147
Make	WMW Union ,Germany
Model	BFT90/3-1
YOM	1983
Condition	Good working condition
Photo	See Photo
Spindle diameter : 90 mm, X axis : 1000 mm, Y axis : 1000 mm, Z axis : 1600 mm, Spindle taper morse : 5, Spindle travel (W) : 710 mm, B axis degrees : 360 , Table size : 1000 x 1120 mm, Max. work piece weight : 2500 kg, Spindle speed range : 8...1600 rpm, Total power required : 23 kW, Machine weight : 8700 kg.

268

ID	MA26137
Make	WMW Union ,Germany
Model	BFT90/3-2
YOM	1988
Condition	Excellent condition,under power
Photo	See Photo
Spindle diameter : 90 mm, Cone in the spindle : MORSE 5, Headstock vertical movement : 1000 mm, Table cross movement : 1600 mm, Spindle height : 710 mm, Table dimension : 1000 x 1120 mm, Max. spindle rotation speed 1600 rpm, Max. spindle torque : 1600 Nm, Machine weight ca. : 9 t .

269

ID	MA25969
Make	IMUB Bacau,Romania
Model	AFD100
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 100 mm, X travel : 1355 mm, Y travel : 1000 mm, Table : 1100 x 1300 mm,

270

ID	MI5846
Make	Tos Czech
Model	WH80
YOM
Condition	Very good condition
Photo	See Photo
Spindle diameter : 80 mm, Spindle taper : 5 morse, Maximum diameter of the boring spindle : 450 mm, Maximum depth of drilling : 710 mm, Spindle stroke : 900 mm, Clamping table surface : 1000 x 1000 mm, Spindle speed :- total of 21, range 14-1400 ot/min, Feeds :- Spindle 21, along and across the table, Headstock vertically from 0.025 to 2.5 mm / rev, Rapid all groups : 2600 mm/min, Spindle motor : 7.5 kW, Motor for rapid : 1.1 kW, Machine floor space : 2400 x 4600 mm, Machine weight : 10,000 kg. with - Tail stock, Facing chuck , Toolings, DRO.

271

ID	MI5842
Make	WMW Union ,Germany
Model	125/3
YOM	1975
Condition	Good Condition
Photo	See Photo
Spindle diameter : 125 mm, Rotary table size : 1400 x 1600 mm, Spindle travel : 1120 mm, Longitudal travel : 2000 mm, Cross travel : 1600 mm, Vertical travel : 1500 mm, Complete with tailstock, facing chuck.

272

ID	MA25591
Make	WMW Union ,Germany
Model	BFT130/5
YOM	1977/8
Condition	Good Condition
Photo	See Photo
Spindle : 130 mm, X travel (cross) : 2240 mm, Y travel (vert) : 1700 mm, W travel (longitudinal) : 1800 mm, Z travel (spindle) : 1000 mm, Facing chick : 785 mm, Spindle turning speed range : 4,5-900 U/min, Spindle taper : 50

273

ID	MI5807
Make	Tos Czech
Model	H100A
YOM	1960
Condition	good mechanical condition
Photo	See Photo
Diameter of working spindle : 100 mm, Travel X axis : 1250 mm, Diameter of working spindle : 100 mm, Taper in spindle : Mo6, Slip out of working spindle (W) : 900 mm, Cross adjustment of table (X) : 1250 mm, Motion of work head on frame (Y) : 0 - 1120 mm, Longitudinal adjustment of table (Z) : 1250 mm, Clamping area of table : 1250 x 1250 mm, Main motor output : 7.5 kW, Dimensions l x w x h : 3700 x 6000 x 3000 mm, Machine weight : 13550 kg. Machine is complete with facing chuck, tail stock and DRO.

274

ID	MI5731
Make	WMW
Model	BFT100/IV
YOM
Condition	Good condition,under power
Photo	See Photo
Spindle dia : 100 mm, X travels : 1600 mm, Y travels : 1100 mm, Z travels : 1600 mm, with facing chuck.

275

ID	MI5730
Make	Kearns
Model
YOM
Condition	Good condition,under power
Photo	See Photo
Spindle dia : 100 mm, X Travel : 1900 mm, Y Travel : 1550 mm, Z Travel : 1800 mm, Table size : 1200 x 1200 mm, With DRO, With Facing Chuck (dia 600 mm).

276

ID	MI5729
Make	WMW Heckert ,Germany
Model	BFT110-6
YOM	1980s
Condition	Excellent condition,under power
Photo	See Photo
Spindle dia : 110 mm, X Travel : 1950 mm, Y Travel : 1300 mm, Z Travel : 1900 mm, Table size : 1400 x 1600 mm, With Facing Chuck (dia 700 mm), With DRO (2007), With Ballscrews, With New AC Servo drive motors.

277

ID	MI5728
Make	Juaristi
Model
YOM
Condition	Good condition,under power
Photo	See Photo
Spindle dia : 110 mm, X travel : 2100 mm, Y travel : 1450 mm, Z travel : 1600 mm, Table Size : 1200 x 1200 mm, With DRO.

278

ID	MI5723
Make	Monti
Model	MC75
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 75 mm, Chuck dia : 480 mm, Spindle movement : 500 mm, Table size:1200 mm X 800 mm, Height : 900 mm, Cross : 1000 mm, Length : 800 mm, Quantity : 2 nos.

279

ID	MA24123
Make	Scharmann
Model	FB80
YOM	1961
Condition	Good Condition
Photo	See Photo
Spindle diameter 80 mm, X-Axis 1.000 mm, Y-Axis 710 mm, Face plate diameter 500 mm, Machine weight 12 to. Dimensions 5.000 x 3.000 x 3.000 mm, With new lubrication and digital readout.

280

ID	MI5718
Make	Kearns Richards
Model	SF125
YOM
Condition	Good condition,under power
Photo	See Photo \| See Video
Spindle dia : 127 mm, X travel : 2600 mm, Y travel : 1900 mm, Z travel : 2100 mm, Rotary Table : 1600 x 1600 mm, With Facing Chuck (dia. 750 mm), Ballscrew & 3 Axis DRO.

281

ID	MI5715
Make	Tos Czech
Model
YOM	1969
Condition	Good Condition
Photo	See Photo
Spindle dia : 90 mm, Table size : 1200 x 1200 mm, Vertical travel : 1.2 m, Horizontal travel : 2 m, With DRO.

282

ID	MA23963
Make	Tos Czech
Model	BFT90
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia. 90 mm,

283

ID	MI5711
Make	Tos Czech
Model	W9
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia. 90 mm, Travels : X= 800 mm, Y= 1000 mm, Table: 1000 x 1120 mm, Taper : MK5, Feed : 12,5-600 mm/min, Travers 2400 mm/min, T-nuts 22 HB, Speeds 18-1400 U/min, Weight 8800 KG.

284

ID	MI5685
Make	Cornac
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia. 130 mm, Motorized rotary table 1800 x 1600 mm, Travels: X= 2000 mm, Y= 1500 mm, Z= 1750 mm, Power 29 kW, Spindle bore ISO 50, Machine Weight 24 tons approx., Hardened and ground guideways, Complete pendant control, Variable speed,

285

ID	MA23597
Make	WMW Union ,Germany
Model	BFT90/2
YOM
Condition	good mechanical condition
Photo	See Photo
Diameter of working spindle : 90 mm, Travel X axis : 850 mm, Travel Y axis : 1300 mm, Travel Z axis : 1100 mm, Clamping taper in spindle : MK 5, Machine output : 7,5 kW, Main spindle speed : 8-1600 rpm, Dimensions l x w x h : 4000 x 4000 x 3000 mm.

286

ID	MA23527
Make	Lazzati,Italy
Model	HB4
YOM
Condition	Good Condition
Photo	See Photo
Sipndle :100 mm, Strock: x travel : 2000 mm, y travel : 1750 mm, z travel : 1500 mm, Table : 1220 x 1525 mm, R.P.M. :8-1500 giri/min.

287

ID	MA23515
Make	Scharmann
Model	FB132opticut
YOM	1970
Condition	Very nice
Photo	See Photo
Table size : 1500 x 1800 mm, Table load max : 15 t, Table cross travel : 1200 mm, Table vertical travel : 1200 mm, Table infeed travel : 1350 mm, Boring spindle travel : 1000 mm, Boring spindle diameter : 132 mm, Facing head diameter : 660 mm, Facing slide travel : 200 mm, Heidenhain Positip 855 programmable Digital Readout, Measuring probe, Linear scales, Tooling and accessories.

288

ID	MA23474
Make	Tos Czech
Model	H100A
YOM	1963
Condition	Good Condition
Photo	See Photo
Diameter of working spindle : 100 mm, without faceplate, with rear raack, gear drive installed.

289

ID	MI5676
Make	Defum Poland
Model	CWC80
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 80 mm, X travel : 1000 mm, Y travel : 1100 mm, Z travel : 1500 mm, Rotary Table : 900 x 1120 mm, With Facing Chuck & Tailstock.

290

ID	MI5675
Make	Defum Poland
Model	HWCS110
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 110 mm, X travel : 3000 mm, Y travel : 2300 mm, Z travel : 3000 mm (distance from chuck to tailstock), Spindle taper : ISO 50, Rotary Table : 1400 x 1600 mm, With Facing Chuck & Tailstock.

291

ID	MI5674
Make	Pegard
Model	U100
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 100 mm, X travel : 1700 mm, Y travel : 1600 mm, Z travel : 1400 mm, Rotary Table : 1000 x 1120 mm, With Facing Chuck, Telescopic Covers & DRO.

292

ID	MI5673
Make	Tos Czech
Model	WH80
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 80 mm, X travel : 1250 mm, Y travel : 1000 mm, Z travel : 710 mm, Rotary Table : 1100 x 1100 mm, With Facing Chuck & Tailstock.

293

ID	MI5663
Make	WMW Union ,Germany
Model	BFT90/3
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter: 90 mm, Table Size: 1000 mm X 1120 mm, Cross Travel (X): 1250 mm, longitudinal Travel (Z): 1600 mm, Vertical travel (Y): 1000 mm, Spindle Movement (W): 710 mm, With Facing Chuck.

294

ID	MI5652
Make	Uma
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia- 55 mm, It has tailstock no facing head

295

ID	MA22915
Make	WMW Union ,Germany
Model	BFT90
YOM	1986
Condition	Excellent
Photo	See Photo
spindle dia 90 mm, table dimensions 1000 x 1020 mm, (Vertical milling Head & 2 cases of toolings)

296

ID	MA22864
Make	Tos ,Varnsdorf
Model	WHN13.4C
YOM
Condition	Good Condition
Photo	See Photo
Spindle diam 130 mm, Spindle motor 34 kW, Travel X axis : 3000 mm, Travel Y axis : 2000 mm, Travel W axis : 1250 mm, Travel Z axis : 800 mm, Rotary table : 1600 x 1800 mm, Machine Capacity : 12 tons, Machine weight : 34,6 tons.

297

ID	MA22697
Make	Accurate
Model	03LP30-701
YOM	1999
Condition	all complete,new,not used and install
Photo	See Photo
Shut height 600 mm , Bed-to-bolster plate adjustment stroke 10 mm, Bed dimensions 940 x 1200 mm, Ram dimensions 860 x 910 mm, Upper knockout, stroke 50 mm, Lower knockout, stroke 50 mm, Mass 120 ton

298

ID	MA22676
Make	WMW Union ,Germany
Model	BFT125/5
YOM
Condition	Excellent condition,almost new
Photo	See Photo
Spindle diameter : 125 mm, Table surface area : 1800 x 2000 mm, Table load : 6 - 7 Tons, Spindle taper ISA 50, Cross travel : 1600 mm, Longitudinal adjustment : 1800 mm, Spindle stroke : 800 mm, Speed : 3,55-560 U/min, Faceplate turning speed range : 3,55-140 U/min, Spindle feeds : 0,03-36 mm, Table feeds : 0,15-7,2 mm/min, Distance between table - spindle center : 20/1580 mm, Total power requirement : 30 kW, Weight of the machine : ca. 32 t, Dimensions of the machine : ca. 8,42 x 4,22 x3,97.

299

ID	MA22401
Make	Scharmann
Model	FB125
YOM	1976
Condition	can be inspected under power
Photo	See Photo
Spindle dia : 125 mm, Spindle Taper : SK50, Traves : X = 2000 mm, Y = 1700 mm, Z = 3000 mm (Spindle to tailstock), W = 400 mm, Table size: 2000x 1600 mm, Max. capacity of workpiece on table 15 tons. With DRO, 3 axis and face chuck with slinding head.

300

ID	MA22361
Make	Russian
Model	2A637F2
YOM	1980s
Condition	Good working condition
Photo	See Photo
spindle dia 160 mm,

301

ID	MA22331
Make	Graffenstaden
Model
YOM	1995
Condition	Good working condition
Photo	See Photo
spindle dia 125 mm, DRO

302

ID	MA22299
Make	Russian
Model	2M614
YOM	1979
Condition	Good Condition
Photo	See Photo
spindle dia 80 mm,X 1000 mm, Y 1000 mm, Z 800/710 mm, spindle taper Morse 5, totary table 900 x 1000 mm, No of T Slots 5, max job weight 1.5 tons , dimensions 4330;3645 x 2590 x 2585 mm, machine weight 8.5 tons.

303

ID	MA22297
Make	Kearns
Model	D3
YOM
Condition	Good Condition
Photo	See Photo
Spindle 100 mm, Spindle speeds 695 rpm, Facing head 600 mm, Facing head speeds 3.9 - 202 rpm, Spindle No. 6 MT, Spindle vert. travel 1300 mm, Top Table 1050 mm, Bottom table 900 mm x 1500 mm, Table cross travel 1200 mm, Table longitudinal travel 1650 mm, Fitted with digital read out, Equipped with outer support (tailstock), Pendant control.

304

ID	MA21956
Make	Defum Poland
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter: 110 mm, Cone: Morse 6, Max. boring diameter: 600 mm, Max. spindle movement: 850 mm, Max. distance between the spindle axis and table: 1150 mm, Rotary table size: 1200 x 1400 mm, Max. longitudinal movement: 1550 mm, Max. cross movement: 1200 mm Engine power of main drive: 15/10 kW, Amount of spindle speeds: 18, Overall dimensions (L x W x H): 6 575 x 1995 x 3240 mm, Net Weight of the machine: approx. 21 tons.

305

ID	MA21946
Make	Tos ,Varnsdorf
Model	W9
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia. 90 mm,

306

ID	MA21912
Make	Tos ,Varnsdorf
Model	WH80
YOM	1965
Condition	Good Condition
Photo	See Photo
Spindle dia. 80 mm, With tailstock, Wothout faceplate

307

ID	MA21861
Make	Wotan,West German
Model	B130L
YOM	1978
Condition	Dismantled
Photo	See Photo
Spindle-� : 130 mm, Taper : 50 SK, Table size : 1520 x 2500 mm, Workpiece cap. Load 12 tons., Traves : X = 2250 mm, Y = 1600 mm, Z = 1700 mm, W = 1100 mm, 30 Spindle speeds range 1,8 � 1000 rpm, Vorschuebe, Feeds rate : X � Y � Z Achse 0,03 � 12 r/mm, Rapid traves : 2500 mm/min., Power : t 18 KW, Total machine weight : 25000 kg, Work. Area : L x W x H = 6500 x 4400 x 3800 mm. Accessories : -DRO Sony 4 Axis -Angulare Milling head -Facechuck : 720 mm -Coolant.

308

ID	MA21859
Make	WMW Union ,Germany
Model	BFT100/III
YOM	1962
Condition	Very good condition
Photo	See Photo
Spindle dia. 100 mm, Spindle taper Morsek 6, Longitudinal travel 3000 mm, Cross travel 1250 mm, Vertical travel 1200 mm, Table size 1120 x 1250 mm,

309

ID	MI5522
Make	Tos Czech
Model	WH63
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia-63mm, Table Size-800mm X 880mm, Chuck Dia-450mm, Cross Tavel-1000mm, Vertical Travel-700mm, Longitudinal Travel-1100mm, With Facing Chuck and Tailstock

310

ID	MA21673
Make	Collet & Engelhardt
Model	BFT130
YOM
Condition	Good Condition
Photo	See Photo
Spindle Size: 130 mm, X-Horiz Travel Of Table:2100 mm, Y-Vert Travel Of Head: 3250 mm, Power: 22.4 kW, Rotary Table W: 1800 mm, Rotary Table L: 2000 mm, Z-Spdl Travel: 2032mm, Dimensions (LxWxH)27' x 15' x 14', Weight APPROX 32 tons. With Facing head, Tailstock,TWO OUTRIGGERS, SIEMENS MOTOR RECENTLY REWOUND.

311

ID	MA21671
Make	Tos ,Varnsdorf
Model	W80
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia. 80 mm,

312

ID	MA21662
Make	Collet & Engelhardt
Model	BFC130
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia. 130 mm, Table size 4000 x 1600 mm, Spindle taper - morse taper no. 6, Length 4000 mm, Cross 1600 mm (column), Vertical 1730 mm, Spindle speeds 10-475 rpm, Equipped with: Digital read out.

313

ID	MA21657
Make	WMW Union ,Germany
Model	BFT90/4
YOM	1975
Condition	Good Condition
Photo	See Photo
Spindle dia. : 90 mm, Spindle taper : ISO 40, Table surface : 1000 x 1000 mm, Table longitudinal travel : 800 mm, Table cross travel : 1000 mm, Headstock verical travel : 700 mm, Weight : 10000 kg. Dimensions : 5150 x 5000 x 2700 mm,

314

ID	MA21649
Make	WMW Union ,Germany
Model	BFT125/III
YOM	1970
Condition	Good working condition
Photo	See Photo
Spindle dia.: 125 mm Table : 1600MM x 1800 mm, Travel Cross-X : 1800 mm, Head Vertical-Y : 1600 mm, Saddle Longitudinal-Z : 1800 mm, Max Load admitted on Table : 6000 Kg, Weight of machine - 35 tons. Without tail stock.

315

ID	MA21636
Make	Nomura
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia. : 130 mm, Table : 1600 x 1800 mm, With DRO.

316

ID	MA21605
Make	Tos ,Varnsdorf
Model	W9
YOM	1973
Condition	Excellent
Photo	See Photo
Spindle dia. 90 mm, Spindle taper ISO 40, Travels : X= 1300 mm, Y= 1250 mm, Z= 1250 mm, W= 800 mm, Includes 3 axis Digital Control Heidenhain, tooling, autom spindleclaimbing.

317

ID	MI5499
Make	Defum Poland
Model
YOM
Condition	can be inspected under power
Photo	See Photo
Spindle dia: 115 mm, X,Y,Z travel : 2000 /2000 / 2000 mm, Boring spindle travel : 1000 mm, Table size: 1600 x 1800 mm, With DRO, Facing Chuck & Tailstock.

318

ID	MA21346
Make	Defum Poland
Model
YOM
Condition	Good Condition
Photo	See Photo
Table sizeL1700x1500mm, Cross traverse:2000mm, Long traverse: 1850mm, Vertical Traverse:1500mm, Spindle taper:ISO50, Chuck diameter:750mm

319

ID	MA21226
Make	Russian
Model	2N636F1
YOM	1989
Condition	complete,excellent condition
Photo	See Photo
Spindle dia 125 mm, Table size 1600x1800 mm, Weight of machine 34 tons.

320

ID	MA21210
Make	Russian
Model
YOM
Condition	Working
Photo	See Photo
X:2000mm Y:1800mm Z:1600mm, Table :110x900mm, Spindle:90m The machine is in working condition.

321

ID	MA21104
Make	Russian
Model	2A622F2
YOM
Condition	Reconditioned
Photo	See Photo
all manuals available.CNC FMS2000

322

ID	MA21051
Make	Union Gera
Model	BFKF-150
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter:150mm, X:3000mm, Y:1600mm Z:1000mm, W:850mm, Table dimensions:1600x1250mm, Control systems: Sinumerik System 8

323

ID	MA20959
Make	Wotan,West German
Model	B130
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia. 130 mm, Travels : X= 2125 mm, Y= 1800 mm, Z= 2350 mm, W= 1200 mm, Table (Built in rotary) 1673 x 1495 mm, Table load capacity 18000 lbs., Spindle speeds 2.5-1000 RPM, Spindle Taper #50, Feeds 27, Feed rates .03-12 Rev/min, Thread 27, Thread rates.25-12 mm, Rapid speeds 2.7 m/min, Approx. weight 48000 lbs. Electrical: 220 / 480V / 3 / 50. Includes: Mitutoyo 3-Axis DRO , Built in Rotary Table, Outboard Supports, Power Draw bar, Steel Way Covers.

324

ID	MA20914
Make	Wotan Werke
Model	B130S
YOM
Condition	Good Condition
Photo	See Photo
Spindle size:130mm, X-Horizontal TVL of Table:2,200mm, Y- Vertical TVL of HEad:1800mm, Power:25hp/18.6kW, RPM:1000rpm, Rot.Table W:1,6000mm, Rot.Table L:1,700mm, ZSpindle TVL:940mm Equipped with milling head, dro & tailstock

325

ID	MA20815
Make	WMW Union ,Germany
Model	BFT125/5
YOM	1983
Condition	Good Condition
Photo	See Photo
spindle dia 125 mm, Vertical travel Headstock 2500 mm Cross travel Y 2000 mm, Longitudinal travelX 2800 mm, Table dimensions1800x 2000 mm, kW : 18,50 Working condition,UNION, BFT125/5

326

ID	MA20763
Make	WMW Union ,Germany
Model	BFT125/III
YOM	1969
Condition	excellent working condition
Photo	See Photo
Spindle dia 125 mm,X 1600 mm, Y 1600 mm, Z 1600 mm, W 800 mm, spindle taper ISO50 , faceplate dia 785 mm, table size 1400 x 1600 mm, main motor 30 kW , dimensions 7490 x 4220 x 5200 mm, weight 31,2 tons.

327

ID	MA20684
Make	Russian
Model	2N636
YOM	1978
Condition	Good Condition
Photo	See Photo
Spindle dia : 125 mm, Table Size : 1600 x 1800 mm, weight of machine 34 tons

328

ID	MA20650
Make	Russian
Model	2A636F2
YOM	1985
Condition	Good Condition
Photo	See Photo
spindle dia 125 mm , length of table working surface 1800 mm , table width 1600 mm , weight 36.85 tons, with ball screws

329

ID	MA20617
Make	Wotan,West German
Model	B130S
YOM
Condition	Good Condition
Photo	See Photo
Spindle: 130 mm, x axis: 2200 mm, y axis: 1600 mm, spindle travel: 900 mm, saddle travel: 1600 mm, table: 1520 x 1700 mm, table is 360�.

330

ID	MA20360
Make	IMUB Bacau,Romania
Model	AFD100
YOM
Condition	good working condition,complete
Photo	See Photo
Spindle diameter 100 mm, Spindle taper 50 ISO, Spindle speed 12.5 - 1180 rpm, Table dimension 1220 x 1524 mm, Transversal stroke 1530 mm, Longitudinal stroke 950 mm, Vertical stroke 1000 mm, Max. Weight of work-piece 5000 Kg, Main motor power 11 Kw, Machine weight 16000 Kg, Machine dimensions (W x L x H) 4990 x 3710 x 3250 mm.

331

ID	MA20214
Make	Kolomna Russia
Model	2A635
YOM
Condition	Very good condition
Photo	See Photo
Spindle dia 125 mm Table size 1800 x 1600 (Rotary) Table Travel 1100 (side to side) Table Travel 1800 (front to back) Machine weight 31,000 kgs Machine size 7500 x 3500 x 3930

332

ID	MA20213
Make	Ceruti
Model	AF80/130
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia 80 mm, Table size 1100 x 1300 (Revolving), Cross travel 1300 mm, Long Travel 2400 mm, Vertical Travel 1400 mm, DRO XYZ

333

ID	MA20140
Make	Russian
Model	2B635
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 160 mm, distance between spindle and table 1350 mm, table dimensions 1600 x 1250 mm, max X travel 1000 mm, spindle RPM 3,2-1000 , electric motor 14 kW, dimensions 7500 x 3515 x 3930 mm, weight 27.9 tons.

334

ID	MA20119
Make	Toshiba Japan
Model	BFT13BW2
YOM
Condition	Good Condition
Photo	See Photo
Spindle - 127 mm, Milling Dia - 225 mm, Spindle RPM - 9 - 1200, Spindle Travel - 1200 mm (Top to Bottom), Quill Travel - 900 mm, Table Travel - 1300 (side to side), Table Travel - 2500 (front to back), Table size - 2500 x 1200, Includes - Facing Plate, Machine weight - 25,000 kgs, Machine size - 6680 x 6117 x 3275 mm.

335

ID	MI5329
Make	Russian
Model	AF85
YOM
Condition	Very good condition,Under power
Photo	See Photo
Spindle dia. : 85 mm, Table size : 1300 x 1100 mm, Travels : X= 1700 mm, Y= 1200 mm, Z= 2000 mm, DRO - Y axis, X axis (Make-Electronica). Lubrication - Automatic Lubrication System.

336

ID	MA19987
Make	WMW Union ,Germany
Model	BFT90/3
YOM	1977
Condition	Good Condition
Photo	See Photo
Spindle dia. - 90 m, Cross movement - 2200 mm, Vertical movement -1600 mm. Machine History 1992 - Retrofitted with CNC (Heidenhain TNC 360) 2002 - Reconditioned and repainted Replacement of main spindle bearing 2006 - Regrinding and honing of spindle taper

337

ID	MA19946
Make	Wotan,West German
Model	B75
YOM	1971
Condition	Good Condition
Photo	See Photo
Cross way X - 1400 mm, Y - 1000 mm, Z - 800 mm, W - 550 mm, Table turnable - 360�, Spindle � - 75 mm, Spindle taper - SK 40, Table size - 1000 x 800 mm, Spindle speed - 12-1000 Rpm, Feed range - 0,02-8 mm/U, Rapid feed - 2400 mm/min, Drive capacity - 6,7 kW, Weight - 7900 kg.

338

ID	MA19924
Make	Meuser
Model	M110BFE
YOM
Condition	Very good condition
Photo	See Photo
Spindle Diameter - 110 mm, Langitudinal Stroke - 1470 mm, Transversal Stroke - 1300 mm, Vertical Stroke - 1530 mm, Table - 1450 x 1450 mm, Max. Load in - 8000 kg, Max. Spindle Speed - 710 tr/min., Spindle taper - ISO 50, Principal Moteur Power - 25 CV, Weight of the machine - 22000 kg, Equipped with: Univesal Milling head, Steady, Automatic Clamping tool, surfacing plate - dia 600 mm, DRO 3 axis Heidenhain POSSITIP 855.

339

ID	MA19904
Make	Tos ,Varnsdorf
Model	W100
YOM	1990
Condition	Very good condition
Photo	See Photo
spindle diameter - 100 mm, Table size - 1250 x 1250 mm, X - 1600 mm, Y - 1120 mm, Z - 1250 mm, W - 900 mm,, Tool taper - ISO 50, spindle speed - 7,1 � 1.120 rpm, Incl. - 3-axis DRO HEIDENHAIN, facing chuck.

340

ID	MA19839
Make	WMW Union ,Germany
Model	BFT125/III
YOM	1975
Condition	Good condition,under power
Photo	See Photo
Spindle diameter - 125 mm, Table size - 1600 x 1900 mm, X - 1600 mm, Y - 1600 mm, Weight of machine approax - 25000 kg.

341

ID	MA19832
Make	WMW Heckert ,Germany
Model	BFT110/6
YOM
Condition	never used
Photo	See Photo
spindle dia 110 mm

342

ID	MA19821
Make	Wotan,West German
Model	B150S
YOM	1974
Condition	Good Condition
Photo	See Photo
X - 2000, Y - 1600, Z - 1500, W - 700 mm, Table - 1100 x 1400 mm, Taper - SK 50, Speeds of spindle - 9-1000 Upm, several tools.

343

ID	MA19779
Make	Tos ,Varnsdorf
Model	W100
YOM	1985
Condition	Very good condition
Photo	See Photo
Table size - 1250 x 1250 mm, X - 1600 mm, Y - 1120 mm, Z - 1250 mm, W � 900 mm, Spindle diameter - 100 mm, Tool taper - ISO 50, spindle speed - 7,1 � 1.120 rpm, incl. 3-axis DRO OSS NS � 130, incl. facing lathe.

344

ID	MA19767
Make	WMW Union ,Germany
Model	BFT125
YOM	1976 rec 2008
Condition	excellent working condition
Photo	See Photo
spindle dia 125 mm,X 1400 mm, Y 1600 mm, Z 1600 mm, W 800 mm, spindle taper ISO50 , faceplate dia 785 mm, table size 1400 x 1600 mm, main motor 30 kW , dimensions 7490 x 4220 x 5200 mm, weight 31,2 tons, with DRO of Jenix

345

ID	MA19731
Make	Wotan,West German
Model	BF130
YOM
Condition	Excellent
Photo	See Photo
Spindle Diameter : 130 mm, Spindle Taper : ISO50, Spindle Speeds : (33) 2.5 - 1000 RPM, Travels: X-Axis Travel (Cross) : 2150 mm, Y-Axis Travel (Vertical) : 1800 mm, Z-Axis Travel (Saddle) : 2400 mm, W-Axis Travel (Quill) : 1200 mm, Rotary table : 1700 mm x 1500 mm, Max. Weight on Table : 8,000 Kg. Spindle Motor 15HP, Feeds 27, Feed rates .03 - 12 rev / min, Threads 15, Thread Rates .25 - 12 mm, Rapid Speeds 2.7 m/min, Equipped With: 360 deg. Rotary Table, Mitutoyo 3-Axis Digital Readout, Right Angle Head, Steel Way Covers, Power Draw Bar, Outboard Supports.

346

ID	MA19718
Make	Tos ,Varnsdorf
Model	W100A
YOM	1973
Condition	Good Condition
Photo	See Photo
Spindle Dia.: 100 mm, Spindle Taper : Morse Taper # 5, Number of Spindle Speeds : 23, Range of Spindle Speeds : 7.1 to 1120 R.P.M., Facing Chuck Dia. :600 mm, Travels: Vertical Travel : 1120 mm, Cross Travel :1600 mm, Longitudinal Travel : 1600 mm, Spindle Travel : 900 mm, Inbuilt Rotary Table : 1250 X 1250 mm, Overall Length : 6020 mm, Overall Width : 3500 mm, Overall Height : 3000 mm, Total (net) Weight : 14000kg (30864 lbs) Maximum weight of workpiece including clamping elements: 3,000 kg(6,600 lbs). Accessories: Cross travel has side support travel. Facing Chuck. 3 Axis DRO. Coolant Pump.

347

ID	MA19638
Make	WMW Union ,Germany
Model	BFT125/5
YOM
Condition	Good Condition
Photo	See Photo
Spindle � : 125 mm, X - 2000, Y - 2000 mm, Table : 1800 x 2000 mm.

348

ID	MA19634
Make	Tos Czech
Model	W100
YOM	1967
Condition	Good Condition
Photo	See Photo
Diameter of working spindle : 100 mm, Spindle taper : Morse 6, Travel of working spindle : 900 mm, Max diameter with face turning: 900 mm, Clamping surface of the table : 1250x1250 mm, Revolutions of working spindle: 7,1-1200 rpm, Speed of the front plate: 7,1-224 rpm, X : 1600 mm, Y : 1120 mm, Z : 1250 mm, Drilling traverse: 0,02-12 mm/rev., Milling traverse : 18-900 mm/min., Rapid traverses : 2 800 mm/min., Machine dimensions : 6710 x 3450 x 3000 mm, Weight : 14 000 kg.

349

ID	MA19513
Make	Russian
Model	2620B
YOM	1978
Condition	Excellent
Photo	See Photo
Spindle diameter 90 mm, internal spindle taper Морзе №5 , Table overall dimensions: - length 1130 mm, - width 944 mm, The greatest movings: mm - of a Wheelheads 1000 mm, - of a spindle 710 mm, - A table across / lengthways 1000/1090 mm, - A support of a faceplate (radially) 170 mm, Spindle speed rpm 12,5-1000, Amount of speeds of rotation of a spindle 22 , Speed of rotation of a faceplate 8-200 RPM, Amount of speeds rotation of a faceplate 15, highest torque of spindle 308 , The greatest twisting moment on a faceplate 467, Range of submission of a table lengthways / across mm 1,4-1110, Range feeds of a spindle mm 2,2-1760 , Range feeds of a radial support mm 0,88-700, The greatest strengthening of a feed: kg - of a spindle 1500, - Wheelheads of a table up and down 2000, - of support 700, The greatest recommended diameter of a chiseled aperture: mm - of a spindle 320, - of support 600 The greatest recommended diameter of a ground end face a support mm 530, cutted thread: - Metric (step) mm 1-10, - Inch Thread on one inch" 4-20 , Main electric motor power kW 10, The maximal weight of a processable product kg 2000, Machine overall dimensions: mm - length 5700 - width 300 - height 300, Machine weight 12.5 tons,

350

ID	MA19498
Make	Tos Czech
Model	WHN9BA
YOM	1984
Condition	never used
Photo	See Photo
spindle dia 90 mm, X 1250 mm, Y 900 mm, Table size 1000x1120 mm , Taper in spindle ISO 50, Longitudinal motion of table 1000 mm, Cross motion of table 1250 mm, Dimension 4540x3460x2690 mm, Machine weight 12 tons.

351

ID	MA19489
Make	Tos Czech
Model	WHN9B
YOM	1983
Condition
Photo	See Photo
Spindle dia 90 mm, X 1370 mm, Y 1140 mm, Spindle 930 mm; Table 1000 x 1120 mm, Longitudinal motion of table 1000 mm, Cross motion of table 1250 m, Power 15 kW, Weight 12 tons.

352

ID	MA19368
Make	Russian
Model	2637
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 160 mm , max weight of processed workpiece 10 tons , vertical travel of headstock 1400 mm , dimensions of revolving table working surface 1600 x 1800 mm , travel of table X 1600 mm , Y 1400 mm , range of faceplate rotation frequencies 6,3...1000 RPM , range of spindle headstock and table feed rates ( longitudinal, cross and circular across dia 790 mm), mm/min 2...1700 , max torque on spindle 3500 Nm ,

353

ID	MA19362
Make	WMW Union ,Germany
Model	BFT90-3-2
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia - 102 mm, Spindle Taper - ISO 50, W - 710 mm, X - 1600 mm, Y - 1250 mm, Z - 1450 mm, Table Stroke B - 360, Working Surface - 1250 x 1400 mm, DRO Heidenhain.

354

ID	MA19310
Make	Tos Czech
Model	H80
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter 80 mm, Spindle taper CM 5, spindle axial stroke 710 mm, Maximum boring diameter 450 mm, Facing head diameter 480 mm, Table area 1120x900 mm, Table cross travel 760 mm, Longitudinal stroke of the table 1000 mm, Vertical stroke of the spindle head 900 mm, Rotary table 360�, Number of spindle speeds 18, Spindle speed 22,4 � 1000 tr/mn, Number of feeding speeds 32, Spindle feeding speeds 0,02 � 12 mm/tr, Motor 7,5 cv, Approximate weight 8150 kg, Dimensions 4950x2450x2550 mm.

355

ID	MA19309
Make	Ceruti
Model	ACR100
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter 100 mm, Spindle taper SA 50, Table cross travel 2000 mm, Vertical stroke of spindle carrier - Y 1200 mm, stroke of the spindle - Z 800 mm, Number of facing speeds 9, Surfacing speed 12 � 190 tr/mn, Facing head diameter 550 mm, Table area 1100x1450 mm, Longitudinal stroke of the table 1800 mm, Rotary table 360�, Number of spindle speeds 18, Spindle speed 12 � 1200 tr/mn, Number of feeding speeds 16, Feeding speed 0,025 � 4,8 mm/tr, Spindle motor 15 cv, Approximate weight 16500 kg, Dimensions 6000x4000x3550 mm.

356

ID	MA19308
Make	Bragonzi
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle taper SA 40, Table area 1120x1000 mm, Longitudinal stroke of the table 1600 mm, Table cross travel 1700 mm, Vertical stroke of the spindle 1300 mm, Spindle diameter 100 mm, Number of spindle speeds 24, Spindle speed 5,6 � 1250 tr/mn, Number of automatic feeds 36, Automatic feeds 0,025 � 1800 mm/mn, Spindle motor 11 kw, Approximate weight 8000 kg. Dimensions 2900x4700x3160 mm.

357

ID	MA19283
Make	Stanko-Russia
Model	2637F1
YOM	1981
Condition	Working
Photo	See Photo
Working diameter � 160 mm, Table � 1600 x 1800 mm, RPM � 5 � 800.

358

ID	MA19281
Make	Rocco Coma,Italy
Model	AL55
YOM	1962
Condition	Good Condition
Photo	See Photo
spindle diameter - 55 mm, X - 600 mm, Y - 650 mm, Z - 600 mm, Spindle stroke - 250 mm, Spindle drive motor - 7 kW, Rapid traverse - 1,7 m/min, Fine feed - 5 mm/min, Workpiece weight - 3 ton, Spindle motor - 20 kW, Turning speed range - 23-1380 U/min, Tool taper - MK4, Weight of the machine ca. 3.3 ton, Dimensions of the machine ca. 2.4x1.3x2 m.

359

ID	MA19279
Make	Russian
Model	2620B
YOM
Condition	Good Condition
Photo	See Photo
spindle diameter: 90 mm, spindle taper: Morse 5, spindle shift-out: 710 mm, table clamping area: 1120 x 1300 mm, vertical spindle travel: 1000 mm, table cross travel: 1000 mm, table longitudinal travel: 1090 mm, spintle speed (22 steps): 12,5 - 1600 rpm, spindle motor: 8,5/10 kW, machine dimensions (L x W x H): 5700 x 3200 x 3000 mm, machine weight: 12250 kg.

360

ID	MA19257
Make	Tos ,Varnsdorf
Model	WH10
YOM
Condition	Good Condition
Photo	See Photo
Spindle - 100 mm, Tape ISO 50, W - 630 mm, Revolution of spindle 4-1250 rev/min, Table 1000 x 1120, Maximum weight on the table 3000 kg.

361

ID	MA19237
Make	Tos Czech
Model	H100
YOM	1972
Condition	Good Condition
Photo	See Photo
Spindle Dia. : 100 mm, Faceplate dia. : 600 mm, Spindle taper : Morse 6, Travels: X = 1250 mm, Y = 1120 mm, Z = 1250 mm, Spindle Travel : 900 mm, Spindle Speed 5,6 - 900 rpm, Motor Power 7,5 KW, Weight of job on table : 3000 kg., Overall Dimension : 6000 x 3700 x 3000 mm, Machine Weight : 13550 kW.

362

ID	MA19180
Make	Tos Czech
Model	W100
YOM	1967
Condition	Good Condition
Photo	See Photo
Spindle diameter 100 mm Spindle taper Morse 6 Rotary table size 1250x1250 mm Max table loading 3000 kg X 1600 mm Y 1120 mm Z 1250 mm W 900 mm Spindle speeds range 7,1-1120 rpm Max boring diameter 560 mm, Faceplate diameter 600 mm, Overall dimensions, LxWxH 6020x3500x3000 mm, Weight of the machine 17500 kg.

363

ID	MA19168
Make	Kearns
Model
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 100 mm, ISO50, spindle speeds 3.9 � 440 RPM, facing head 675 mm dia , top table (square) 1200 mm, main table 900 x 2100 mm, vertical travel of spindle 1500 mm, DRO, tailstock base ,

364

ID	MA19162
Make	WMW Union ,Germany
Model	BFT90/3-1
YOM	1989
Condition	Very good condition
Photo	See Photo
Spindle Dia. : 90 mm,

365

ID	MA19147
Make	Nomura
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle : 130mm, X stroke : 2000mm, Y stroke : 1600mm, Rotary Table : 1400mm X 1600mm.

366

ID	MA19138
Make	Daewoo
Model
YOM	1988
Condition	Good Condition
Photo	See Photo
spindle dia 130 mm, X 2000 mm, Y 1500 mm, rotary table 1420 x 1630 mm

367

ID	MA19105
Make	WMW Union ,Germany
Model	BFT90/3-1
YOM	1992
Condition	Very good condition
Photo	See Photo
Spindle Dia. : 90 mm,

368

ID	MA19100
Make	WMW Heckert ,Germany
Model	BFT110/6
YOM
Condition	excellent working condition
Photo	See Photo
spindle dia 110 mm

369

ID	MA19079
Make	Pama Italy
Model	AL127
YOM
Condition	Good Condition
Photo	See Photo
Spindle � 127, Table - 1800 x 1800 mm, X � 2500, Y � 2000, Z - 2300 mm, ISO 50, MOTOR - 25 HP, WEIGHT - 24 TON.

370

ID	MA19078
Make	Ikegai,Japan
Model	DA2110T
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia 110 mm, Rotary Table 1300 x 1200 mm, Table B/F 1,830 mm, Saddle L/R 1,500 mm, Spindle Head to Support 3,000 mm , Spindle Up/Down 1,200 mm, RPM 5 - 1250, With Facing Plate, Support, DRO on 2 axes Footprint 5600 x 3300 Weight 17,500 kgs

371

ID	MA19077
Make	Ceruti
Model	AD125
YOM	1967
Condition	Good Condition
Photo	See Photo
Spindle - 125 mm, X � 2500, Y � 2000, Z - 2000 mm, Table - 1800 x 1500 mm, ISO 50, MOTOR 20 HP, WEIGHT 25 TON, DRO.

372

ID	MA19075
Make	WMW Union ,Germany
Model	BFT90/5
YOM	1988
Condition	Good Condition
Photo	See Photo
Spindle dia - 90 mm, Spindle travel - 700 mm, Spindle taper - ISO 40 PDB, Z - 675 mm, X - 1600 mm, Y - 1000 mm, Table dimensions - 1250 X 1400 mm, R.P.M. - 1600, kW - 15, Volts - 380, Cycles - 50.

373

ID	MA19051
Make	Tos Czech
Model	WHN9
YOM	1972
Condition	Good Condition
Photo	See Photo
DRO, No face chuck

374

ID	MA19037
Make	WMW Union ,Germany
Model	BFT80/3
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter :80mm, Spindle Taper :ISO 40, Spindle Speed :1250 rpm, Motor :10 hp, Travels: X-Axis Travel :1000 mm, Y-Axis (Vertical):1000 mm, Z-Axis (Spindle) :1000 mm, W-Axis (Saddle) :1050 mm, Table Width :1000 mm, Table Length :1120 mm, Maximum Load :5500 lbs, Weight of Machine:10.5 Tons. Equipped With: PLC Control Upgrade, Pendant Control, Heidenhain 4-Axis DRO's.

375

ID	MA19036
Make	WMW Union ,Germany
Model	BFT80
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter:80 mm, Spindle taper:4 MT, Face plate speeds:2,8-125 pr/min, Spindle speeds:99-1000 rpm, Table size T-slotted :900x1100 mm, Travels: Cross travel (X):1000 mm, Vertical travel (Y):900 mm, Longitudinal travel (Z):1700 mm, Length 4700 mm, Height 2750 mm, Width 2600 mm, Weight 7600 kg. Facing Chuck. 3 Axis DRO, Pendant Push Button, Electrical Transformer.

376

ID	MA18923
Make	WMW Union ,Germany
Model	BFT110/6
YOM	1986
Condition	Good Condition
Photo	See Photo
Spindle-� - 110 mm, Taper - ISO 50, X � 1985, Y- 1620, Z - 1960 mm, Stroke of pinole - 710 mm, Table - 1400x1600 mm, Distance between spindlecenter-clamping area - max. 1620 mm, Weigth of tool - 6300 mm, Speed 6,3 - 1250 min, Electrical power - 60 Kw, Requirments for area 7,4x5,9 m, High of machine - 4,5 m, control - HEIDENHAIN TNC 155.

377

ID	MA18909
Make	WMW Union ,Germany
Model	BFT125/I
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia-125 mm, Table size- 1600x2000 mm

378

ID	MA18886
Make	IMUB Bacau,Romania
Model	AFD100
YOM	1975
Condition	Good Condition
Photo	See Photo
Spindle-100 mm, Taper- SK40, Travels X-1600, Y-1200, Z-1500 mm, Table-1100x1100 mm

379

ID	MA18877
Make	Toshiba Japan
Model	BFT13BW1
YOM
Condition	Good Condition
Photo	See Photo
Spindle 130 mm,

380

ID	MA18876
Make	Shinada
Model	SB100
YOM	1973
Condition	Good Condition
Photo	See Photo
Spindle 100 mm, Table 1100 x 1300 (Rotary), Stroke 1500 x 1150 x 1600 mm, With Facing Head and Support (Tailstock).

381

ID	MA18863
Make	Ikegai,Japan
Model	DB90T
YOM
Condition	Good Condition
Photo	See Photo
Spindle 90 mm, Table 1200 x 1400 mm, Stroke 1500 x 1500 x 900 mm, Face Plate 560 mm,

382

ID	MA18862
Make	Kuraki,Japan
Model	KBT1003
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle 100 mm, Table 1100 x 1300 (Rotary)mm, Stroke 1500 x 1250 x 1200 mm, RPM 9.5 - 1000 mm, With Facing Head and side rail.

383

ID	MA18861
Make	Kuraki,Japan
Model	KBT1101
YOM
Condition	Good Condition
Photo	See Photo
Spindle 110 mm, Table 1200 x 1300 mm, Stroke 1600 x 1400 x 1400 mm, Workweight 6,000 kgs.

384

ID	MA18842
Make	WMW Union ,Germany
Model	BFT90/2
YOM	1975
Condition	Good Condition
Photo	See Photo
Table - 1400 x 1250, With tailstock , Without chuck.

385

ID	MA18777
Make	Russian
Model	2E656
YOM	1983
Condition	Good working condition
Photo	See Photo
spindle dia 160 mm, table 1800 x 2000 mm, with tailstock and faceplate.

386

ID	MA18693
Make	Scharmann
Model	FB100/120
YOM	1968 OH 2000
Condition	overhauled
Photo	See Photo
Spindle dia. 120 mm Cross motion 1200 mm Longitudinal motion 1400 mm Vertical motion 1200 mm table 1400x1200 mm spindle speeds 5-1000 rpm With WOHLHAUPTER flanging head, digital readout, new SIEMENS electric, tools, etc.

387

ID	MA18687
Make	Wotan,West German
Model	B90
YOM	1965
Condition	Good Condition
Photo	See Photo
Spindle Diameter, Main-87 mm, Spindle Taper-#5MT, Spindle Travel, W-700 mm, X-1350 mm, Y-1225 mm, Z-950 mm, Table Dimensions (Overall) W x L-1075 x 1225, (21) Spindle Speeds, Range-14 to 1600 RPM, (27) Spindle Feeds, Range- .0012 to .48 IPR, Main Motor, KW Rating- 8.5 KW

388

ID	MA18686
Make	WMW Union ,Germany
Model	BFT100
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia. : 100 mm, Motor Power : 12,9 kW, weight : 17.2 t.

389

ID	MA18679
Make	Tos ,Varnsdorf
Model	W100
YOM	1980
Condition	Good Condition
Photo	See Photo
spindle diameter 100 mm, X 1200 mm Y 1200 mm Z 1300 mm W900 mm table surface area 1250 x 1250 mm table load capacity 3000 kg table rotation 360 � tool taper MK 6 spindle drive 11 kW turning speed range - spindle 1,25 - 900 U/min weight of the machine ca. 13 t,3 axis Digitaldisplay

390

ID	MA18678
Make	WMW Union ,Germany
Model	BFT110/6
YOM	1987
Condition	Good Condition
Photo	See Photo
spindle diameter 110 mm, X 1950 mm Y 1600 mm Z 1500 mm spindle taper ISO 50, spindle stroke - max. 800 mm, table-size 1600 x 1400 mm, turning speed range - spindle U/min, w-axis 800 mm, total power requirement 15 kW weight of the machine ca. 26,7 t dimensions of the machine ca. 7,2 x 4,6 x 4,2 m

391

ID	MA18649
Make	Lucas,USA
Model	441B72
YOM	1997
Condition	Good Condition
Photo	See Photo
Spindle Speed-13 - 1500 RPM, Horizontal Travel-1500/1800, Vertical Travel-1200 mm, Table Travel (In & Out)-1300 mm, Spindle Travel (In & Out)900 mm, Table-1200 x 1800, Feeds-.0001 - .0225 IPM, Taper-#6 Morris, Floor Dimensions-2875 T x 2750 W x 3900 L

392

ID	MA18566
Make	Lazzati,Italy
Model	HB115
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 115 mm, table 2000 x 1500 mm, X 3000 mm, Y 2000 mm, Z 3000 mm, small facing head, milling head, DRO

393

ID	MA18506
Make	Tos Czech
Model	H100A
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 100 mm, moves X(table cross move)=1600, Y=1120, Z=900, W(table longitudinal move)=1250 mm spindle taper ISO 50 table 1250x1250 with face plate, counter-column

394

ID	MA18479
Make	Tos Czech
Model	WHN13.8A
YOM	1984
Condition	Good Condition
Photo	See Photo
Spindle Diameter-128 mm, Y-1968 mm, X-3444 mm, W-787 mm, Z-1279 mm, Table Size (Built In Rotary)-1575 x 1775 mm, Spindle Speeds-12-800 RPM, Spindle Taper-#50, Table Weight Capacity-26,400 LBS.

395

ID	MA18421
Make	Tos Czech
Model	W100
YOM	1067
Condition	working condition but without power connection
Photo	See Photo
spindle dia. 100mm,spindle taper Morse 6,spindle speeds range 7.1-1120 rpm,X-1600mm,Y-1120mm,Z-1260mm,W-900mm, with rotary table 1250mm x 1250mm,table load 3 tons,with facing head and tailstock, machine dimensions 6020mm x 3500mm x 3000mm, Wt. 17.5 tons.

396

ID	MA18376
Make	Union Gera
Model	BFT105
YOM	1988
Condition	Excellent
Photo	See Photo
X=1750 mm; Y=1250 mm; Z=1250 mm; Table 1250 x 1400 mm; ISO - 50; TNC 155 control Heidenhain.

397

ID	MA18367
Make	Kearns
Model	D5
YOM
Condition	Very good condition
Photo	See Photo
Spindle diameter 152 mm, X-1700 mm (1780), Y-1700 mm (2000), Z-1700 mm, (1100), 810 mm dia. Facing Chuck, Off center Boring travel 480 mm, Top table 1500 x 1500 mm, Bottom Table 2100 x 1200 mm, Requires drive belt only, with the following dimensions: aprox. 8 plied, length 8000 mm, width 130 mm, thickness 15 mm.

398

ID	MA18366
Make	Tos ,Varnsdorf
Model	H100A
YOM	1964
Condition	Good working condition
Photo	See Photo
Spindle Diameter-100 mm, X-1300 mm, Y-1250 mm, Z-1250 mm, W-900 mm, Table-1250 x 1250 mm, Facing Head Diameter-600 mm, Complete with Facing Chuck and Tailstock

399

ID	MA18345
Make	Tos Czech
Model	W9
YOM	1973
Condition	Good Condition
Photo	See Photo
Spindle Size: 88 mm, X-Horizontal Travel Of Table: 900 mm, Y-Vertical Travel Of Head: 1075 mm, RPM: 28-1400, Power: 11 HP, Z- Spindle Travel: 700 mm, Cross Travel 1220 mm, Table: 39x44, #40 Spindle Taper, Pendant Control, Rotary Table, Facing chuck Newall 2 Axis DRO, Weight: 18,000 Lbs.

400

ID	MA18331
Make	WKW
Model	90
YOM	1979
Condition
Photo	See Photo
Spindle dia. 90mm,X-1000mm,Y-1000mm,Z-1120mm,spindle taper MKV,table size 1250mm x 1120mm,equipped with optical readout on X and Y axis,div.adaptors and tools,motor capacity 16kW,Dimension of machine 5700mm x 3200mm x 3000mm, Wt of machine incl accessories 12.5 tons.

401

ID	MA18265
Make	Tos Czech
Model	WHN9B
YOM	1981
Condition	Under power
Photo	See Photo
Travels: X= 1300 mm, Y= 950 mm, Z=1100 mm, W= 500 mm, Rotary table : 1000 x 1100 mm,

402

ID	MA18261
Make	Tos Czech
Model	WHN11
YOM	1976
Condition	Good Condition
Photo	See Photo
Rotary table: 1250 x 1250mm; X 1600 mm, Y 1400 mm,Z 1200 mm, W 500mm,

403

ID	MA18255
Make	Tos Czech
Model	WHN13/4A
YOM	1986
Condition	Good Condition
Photo	See Photo
dimensions of table 1800 x 1600mm; X axis 2200mm; Y axis 2400mm; Z axis 1800mm; read-out quote ;

404

ID	MA18253
Make	WMW Union ,Germany
Model	BFK150
YOM
Condition	Good condition,under power
Photo	See Photo
Spindle dia 150 mm, Rotary table 2000 X 1600mm X 3000 mm, Y 2000 mm, Z 1000 mm, W 800 mm, Read out quote; Balls screws to axis; D.C. motor for axis.

405

ID	MA18223
Make	Titan Romania
Model	AFD100
YOM	1977-80
Condition	Good Condition
Photo	See Photo
Diameter spindle-100 mm, Table dimensions-1100x1300, Height spindle from the table-1250 mm, Cross travel-1355 mm, Longitudinal travel-1020 mm, Extend of the spindle-700 mm, Taper spindle-Morse 5, Max.weight table-5000 kg, Dimensions-4990 x 3315 x 3130 mm, Weight of the machine-14.000 kg.

406

ID	MA18174
Make	Tos ,Varnsdorf
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia100mm,biggest average in boring work working spindle 560mm,biggest average at facing 900mm,higest protusion working spindle 900mm,table working surgace 1250mm x 1250mm,material load 3 tons,with facing chuck and tail stock,with electric motor for drive headstock 10kW, dimension of machine 6015mm x 3000mm x 3000mm,machine wt 17.5 tons approx.

407

ID	MA18156
Make	Defum Poland
Model	AD115
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 115 mm, table 1400 x 1600 mm, spindle 50 ISO, X 2500 mm,Y 1500 mm, Z 1500 mm, quill path W = 900 mm, machine with: facing chuck, tailstock

408

ID	MA18135
Make	Russian
Model	2620B
YOM	1966
Condition	Complete ,good working condition
Photo	See Photo
Spindle diameter 90 mm, internal spindle taper Морзе №5 , Table overall dimensions: - length 1130 mm, - width 944 mm, The greatest movings: mm - of a Wheelheads 1000 mm, - of a spindle 710 mm, - A table across / lengthways 1000/1090 mm, - A support of a faceplate (radially) 170 mm, Spindle speed rpm 12,5-1000, Amount of speeds of rotation of a spindle 22 , Speed of rotation of a faceplate 8-200 RPM, Amount of speeds rotation of a faceplate 15, highest torque of spindle 308 , The greatest twisting moment on a faceplate 467, Range of submission of a table lengthways / across mm 1,4-1110, Range feeds of a spindle mm 2,2-1760 , Range feeds of a radial support mm 0,88-700, The greatest strengthening of a feed: kg - of a spindle 1500, - Wheelheads of a table up and down 2000, - of support 700, The greatest recommended diameter of a chiseled aperture: mm - of a spindle 320, - of support 600 The greatest recommended diameter of a ground end face a support mm 530, cutted thread: - Metric (step) mm 1-10, - Inch Thread on one inch" 4-20 , Main electric motor power kW 10, The maximal weight of a processable product kg 2000, Machine overall dimensions: mm - length 5700 - width 300 - height 300, Machine weight 12.5 tons,

409

ID	MA18133
Make	Russian
Model	2620E
YOM	1971
Condition	Good Condition
Photo	See Photo
Spindle diameter 90 mm, internal spindle taper Морзе №5 , Table overall dimensions: - length 1130 mm, - width 944 mm, The greatest movings: mm - of a Wheelheads 1000 mm, - of a spindle 710 mm, - A table across / lengthways 1000/1090 mm, - A support of a faceplate (radially) 170 mm, Spindle speed rpm 12,5-1000, Amount of speeds of rotation of a spindle 22 , Speed of rotation of a faceplate 8-200 RPM, Amount of speeds rotation of a faceplate 15, highest torque of spindle 308 , The greatest twisting moment on a faceplate 467, Range of submission of a table lengthways / across mm 1,4-1110, Range feeds of a spindle mm 2,2-1760 , Range feeds of a radial support mm 0,88-700, The greatest strengthening of a feed: kg - of a spindle 1500, - Wheelheads of a table up and down 2000, - of support 700, The greatest recommended diameter of a chiseled aperture: mm - of a spindle 320, - of support 600 The greatest recommended diameter of a ground end face a support mm 530, cutted thread: - Metric (step) mm 1-10, - Inch Thread on one inch" 4-20 , Main electric motor power kW 10, The maximal weight of a processable product kg 2000, Machine overall dimensions: mm - length 5700 - width 300 - height 300, Machine weight 12.5 tons,

410

ID	MA18102
Make	Tos ,Varnsdorf
Model	HDM800A
YOM
Condition	Complete,working condition
Photo	See Photo
Spindle dia. 100mm,spindle taper Morse 6,table size 1250mmx1250nn,control convetional, with face paltes and tools. Wt of machine 14.5 tons approx.

411

ID	MA18092
Make	Russian
Model	2620
YOM
Condition	Good condition,under power
Photo	See Photo
spindle dia 90 mm, table 890 x 1120 mm.

412

ID	MA18076
Make	Wotan,West German
Model	B130S
YOM	1977
Condition	Good Condition
Photo	See Photo
Spindle dia-128 mm, Y-1575 mm, X-2150 mm, Z-875 mm, W-1575 mm, Tapper in Spindle-#50 Tapper, Speeds-2.5-1000 rpm, Threading 2-48 tpi, feeds (27)-.001-.500 ipr, Table Size (Built in Rotary)-1500x1675 mm, Table Capacity-18,000 lbs, Overall Dimenions-4425x6525x4725 mm, Weight-48,000 lbs.

413

ID	MA18071
Make	Ivanovo plant,Russia
Model	2620
YOM
Condition	Good working condition
Photo	See Photo
Spindle Dia-90 mm, Spindle Taper-Morse No 5, Table dimensions-1130x944 mm, Spindle speed range-12,5-1000 rmp, Max. work piece weight-2000 kg, Machine weight-12500 kg.

414

ID	MA17987
Make	WMW Union ,Germany
Model	BFT125/I
YOM
Condition	Dismantled
Photo	See Photo
Spindle dia 125 mm, Longitudinal Travel 1600 mm, Cross Travel 3000 mm, Cross Travel with the column 2500 mm, Spindle Travel 1000 mm, Vertical Travel 2000 mm, Table 1900 x 1600 mm, Power 25 Cv, 18 Speeds / 2 Ranges 14-900 RPM, Accesories: 3 Axes DRO Heidenhain, faceplate 800 mm, steady rest.

415

ID	MA17982
Make
Model	2A637F11
YOM
Condition	Brand New
Photo	See Photo
Table dimensions 1600x1800mm; table load 12000kg; Diam. of spindle 160mm; Spindle taper 50; Max.Travel: X-2000mm,Y(ram vertical)-1600mm,W (spindle)-1000mm; Rotation limit of a spindle 5...1000 t/min;Work feed limits: X,Y,Z,W 2.0-2000 mm/min; Main motor power not less then 22 KW; Dimensions:length 8700mm, width 5600mm,height 5100mm, weight 36350kg.

416

ID	MA17981
Make
Model	2A636F11
YOM
Condition	Brand New
Photo	See Photo
Table dimensions 1600x1800mm; table load 12000kg; Diam. of spindle 125mm; Spindle taper 50; Max.Travel: X-2000mm,Y(ram vertical)-1600mm,W (spindle)-1000mm,U(carriage)-200mm; Rotation limit of a spindle 6,3...1250 t/min; Rotation limit of Faceplate 3,15...250 N; Work feed limits: X,Y,Z,W 2.0-2000 mm/min, U 0,63-630 mm/min; Main motor power not less then 22 KW; Dimensions:length 8700mm, width 5600mm,height 5100mm, weight 36850kg.

417

ID	MI5112
Make	Tos Czech
Model	W9A
YOM
Condition	Excellent condition,under power
Photo	See Photo
Spindle dia : 90 mm, Hardened slide, Spindle Taper : ISO 40, Clamping motorised, X travel : 1300 mm, Y travel : 1100 mm,Z travel : 2000 mm, Complete with Tailstock, Facing chuck and Track DRO.

418

ID	MA17958
Make	Wotan,West German
Model	C105D
YOM	1971
Condition	Very good condition,Under power
Photo	See Photo
Spindle diameter: 105 mm Spindle attachement: ISO 50 Spindle speed: 8-1250 rpm. Gap: 700 mm Table size: 1600x1400 mm Cross adjustment table: 2500 mm Vertical adjustment head stock: 1500 mm Longitudinal adjustment pilar: 900 mm Weight: 22 to Accessories: 1 Man. petition controller WOTAN 1000 All axis with measuring system HEIDENHAIN Several spindle attachements

419

ID	MA17940
Make
Model	2615F1
YOM
Condition	Brand New
Photo	See Photo
Table dimensions 900x1000; table load 1500kg; Diam. of spindle 80,(85)mm; Spindle taper ISO40mm; Max.Travel: X-1000mm,Z-1000mm,Y(ram vertical)-800mm,W (spindle)-500mm; Rotation speed of a spindle 20-1600 t/min; Work feed limits: X,Y,Z,-1.6-1280 mm/min,W 2,5-2000mm/min; Main motor power 6,0/6,2 KW; Dimensions:length 4550mm, width 2600mm,height 2600mm, weight 7500kg.

420

ID	MA17939
Make
Model	2614F1
YOM
Condition	Brand New
Photo	See Photo
Table dimensions 900x1000; table load 1500kg; Diam. of spindle 80,(85)mm; Spindle taper ISO40mm;Diam. of Faceplate 500mm; Max.Travel: X-1000mm,Z-1000mm,Y(ram vertical)-800mm,W (spindle)-500mm,U(carriage)-125mm; Rotation speed of a spindle 20-1600 t/min; Rotation limit of Faceplate 8-200 t/min; Work feed limits: X,Y,Z,-1.6-1280 mm/min,W 2,5-2000mm/min, U 0.8...700mm/min; Main motor power 6,0/6,2 KW; Dimensions:length 4550mm, width 2600mm,height 2600mm, weight 7500kg.

421

ID	MA17932
Make
Model	2B622F11
YOM
Condition	Brand New
Photo	See Photo
Table size 1250x1250; Table load 5000kg; Diam. of boring spindle-130,110mm; Spindle taper ISO 50mm;Max.Travel: X-1250mm,Z-1000mm,Y(ram vertical)-1000mm,W (spindle)-710mm, B(turn of a table)- not limited in degrees; Rotation limit of a spindle 2000, 2500(6-1250)t/min; Work feed limits: X,Y,Z,W 2-6000mm/min,B 1-360dgr/min; Main drive power not less than 28 KW; Max. moment on spindle 1765 Nm; Max. feed capacity: X,Y,Z,W -11000N; Dimensions:length 7600mm, width 3750mm,height 3250mm, weight 17000kg.

422

ID	MA17931
Make
Model	2A622F11
YOM
Condition	Brand New
Photo	See Photo
Table size 1250x1250 or 1120x1250mm; Table load 5000kg; Diam. of boring spindle-110mm; Spindle taper ISO 50mm; Max.Travel: X-1250mm,Z-1000mm,Y(ram vertical)-1000mm,W (spindle)-710mm, B(turn of a table)- not limited in degrees; Rotation limit of a spindle 6-1250 t/min; Work feed limits: X,Y,Z,W 1.25 -1250mm/min,B- 1-360 dgr/min; Main drive power 11 KW; Dimensions:length 7600mm, width 3750mm,height 3250mm, weight 17000kg.

423

ID	MA17921
Make	SMTCL
Model	TPX6111C/3
YOM	2007
Condition	Good condition,under power
Photo	See Photo
Spindle Dia 108.25 mm, Taper In Spindle With Power Draw Belt . #50 Speeds (3-Speed Gearbox) 8-1000 RPM, Headstock Vertical Travel1175 mm, Table Cross Travel 1575 mm, Saddle Travel 1375 mm, Rotary Table (Built In Power) 1225 x 1075 mm, Table Indexing 360 Degree, Maximum Table Weight Capacity 6,600 Lbs EQUIPPED WITH: Full Pendant Controls 4-Axis Heidenhain Positip 880 Digital Reaout System Heidenhain Scales Built-In Power Rotary Table Built In Facing Head Power Draw Bar Steel Sliding Way Covers Spindle Bearing Upgrade

424

ID	MA17909
Make	Tos ,Varnsdorf
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle diameter 100mm Digital read-out 2 axis + track x 7600 y 2000 z 1000mm TOS table 360 � Table load 30 t Table 2500x2400mm

425

ID	MA17895
Make
Model	2620A
YOM
Condition	Brand New
Photo	See Photo
Table size 1250x1250 or 1120x1250mm; Table load 5000kg; Diam. of boring spindle-90mm; Spindle taper ISO 45mm;Diam. of Faceplate- 630mm; Max.Travel: X-1250mm,Z-1000mm,Y(ram vertical)-1000mm,W (spindle)-710mm,U(carriage)-160mm, B(turn of a table)- not limited in degrees; Rotation limit of a spindle 10-1600 t/min; Rotation limit of Faceplate 6,3-160 t/min; Work feed limits: X,Y,Z, 1.25 -1250mm/min,W 2-2000mm/min,U 0,8-800mm/min; Main motor power 11 KW; Dimensions:length 7600mm, width 3730mm,height 3220mm, weight 17000kg.

426

ID	MA17868
Make	Bragonzi
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia 130 mm, Spindle rotations 1000 RPM, Vertical 1800 MM, Cross 1900 MM, Longitudinal2500 MM, Table1800 x 1400 MM, DRO. Machine with facing chuck and milling head .

427

ID	MA17855
Make	Russian
Model	2E656
YOM	1975
Condition	Good working condition
Photo	See Photo
spindle dia 160 mm,X 3150 mm, Y 2000 mm, Z 1250 mm, faceplate , back column , table 2000 x 2600 mm, length of working surface 4200 mm, with travel of front column 3150 mm, distance between T slot of plate 300 mm, width of T slot plates 28 mm, end of moveable spindle metric 80 , limit of feed of moveable spindle of stock of front column 25 mm/min , machine dimensions 11500 x 560 mm, machine weight without electric 41.5 tons , power of all electric motors min power 51,3 kW , Dismantable moveable table: 2000 x 2500 mm, max weight of workpiece on a table 16 tons , dimensions of dismountable table 3745 +_ 10 mm, width 3100 +_ 10 mm, height 850 mm, weight 111 tons, face plate dia 800 mm.

428

ID	MA17849
Make	Russian
Model	2A635
YOM	1971
Condition	Good Condition
Photo	See Photo
spindle dia 125 mm

429

ID	MA17831
Make	Russian
Model	2N636F1
YOM	1983
Condition	Good Condition
Photo	See Photo
Spindle dia 125 mm, Table size 1600x1800 mm, Weight of machine 34 tons.

430

ID	MA17827
Make	Tos Czech
Model	W100
YOM	overhaled 2000
Condition	overhauled
Photo	See Photo
spindle diameter 100, spindle taper ISO 50 table 1250x1250 moves X(table cross move)=1600, Y=1120, Z=900, W(table longitudinal move)=1250 mm with face plate, counter-column,with DRO

431

ID	MA17784
Make	Juaristi
Model	MDR110
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 110 mm, X 2000 mm, Y 1700 mm, Z 1500 mm, table 1500 x 1200 mm, Visu Heidenhain

432

ID	MA17736
Make	Tos Czech
Model	H100A
YOM
Condition	Good working condition
Photo	See Photo
Spindle dia. 100mm,spindle taper Morse 6,table size 1250mmx1250nn,control convetional, with face paltes and tools. Wt of machine 14.5 tons approx.

433

ID	MA17734
Make	Tos Czech
Model	W100
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia.100mm,spindle taper Morse 6,table size 1250nnx1250mm,control conventional,face paltes and tools are avialble,Wt. of machine 15 tons approx.

434

ID	MA17649
Make	Defum Poland
Model	HWCA110
YOM
Condition	Very good condition
Photo	See Photo
spindle diam 110 mm , taper Morse 6 , max boring diam 600 mm , max spindle traveling 850 mm , max distance between sindle axis and table 1150 mm , area of rotary table 1200x1400mm , longitudinal travelling 1550 mm , crosswise travelling 1200 mm, machine weight 24 tons.

435

ID	MA17563
Make	Juaristi
Model	MDR110CF
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia : 110 mm, Cross (X) travel : 2000 mm, Vertical (Y) travel : 1500 mm, Longitudinal (Z) travel : 2000 mm, Spindle Taper : ISO 50, Spindle travel : 800 mm, Spindle speed : 7 - 1000 RPM, Feeds : 0.003 - 12 mm/min, Main motor : 15 CV, with 3 Axis DRO, Facing chuck, Tailstock, Hydraulic tool clamping & many tools.

436

ID	MA17561
Make	Russian
Model	2620V
YOM	1975
Condition	Very good condition
Photo	See Photo
spindle dia 90 mm, table 1250 x 1120 mm.

437

ID	MA17444
Make	Tos Czech
Model	WHN13.4A
YOM	1986
Condition	Very good condition
Photo	See Photo
X 2000 mm, Y 2000 mm, Z 1250 mm, W 800 mm, Clamping area of table 1600x1800 mm Spindle ISO 50 - Main motor output 37 kW, Dimensions 7480x6300x4800 mm, Machine weight 32 tons,one vertical milling head one right-angle floor plate rotary table 1600x1800 mm dro (3 axes), made in czechoslovakia

438

ID	MA17397
Make	Giddings & Lewis
Model	360F
YOM
Condition	good working condition,complete
Photo	See Photo
Spindle Dia. :152 mm, Faceplate Dia. : 750 mm, Travels; X= 2450 mm, Y= 1350 mm, Z= 900 mm, Spindle Taper : 80, Dia. between spindle and table : 1500 mm, Table size : 1520 x 2450 mm, Motor Power : 11 kw.

439

ID	MA17377
Make	Defum Poland
Model	HWC110
YOM
Condition
Photo	See Photo
Spindle dia 110mm,taper morse 6,max. boring dia.600mm,max. spindle travel 850mm,max distance between spindle axis and table 1150mm,with rotary table 1200x1400mm,longitudinal tarvel 1550mm,crosswise travelleing 1200mm,Wt of machine 24 tons approx.

440

ID	MA17376
Make	Defum Poland
Model	WFG100N
YOM
Condition	Very good condition
Photo	See Photo
spindle dia 100 mm , spindle taper ISO 50, spindle shift-out 700 mm, table clamping area 1100 x 1100 mm, table loading 3000 kg, vertical spindle travel 1000 mm, table cross travel 1200 mm, table longitudinal travel 900 mm , machine dimensions 480 x 3700 x 3465 mm, machine weight 12000 kg, Machine has old numerical control

441

ID	MA17373
Make	Defum Poland
Model	HWC110
YOM
Condition	Good Condition
Photo	See Photo
spindle diam 110 mm, spindle taper Morse 6, max boring diam 600 mm, max spindle traveling 850 mm, max distance between sindle axis and table 1150 mm, area of rotary table 1200x1400mm, longitudinal travelling 1550 mm, crosswise travelling 1200 mm, machine weight 24 000,00 kg.

442

ID	MA17337
Make	Tos ,Varnsdorf
Model	H100
YOM	1951
Condition	Electricals parts should be replaced
Photo	See Photo
Y 1120 mm, W 900 mm, table size 1250 x 1250mm, Main motor 7,5 kw, Machine dimensions 6050�2880�3000mm, Weight of machine: 11 200kg

443

ID	MA17282
Make	Defum Poland
Model	HWCS110
YOM
Condition	Very good condition
Photo	See Photo
spindle diam. 110mm , taper Morse 6 , max boring diam. 1000 mm , max spindle traveling 850 mm , max distance between sindle axis and table 1150 mm , area of rotary table 1400x1600mm , longitudinal travelling 1350 mm , crosswise travelling 1800 mm, machine weight 26 tons.

444

ID	MA17185
Make	Tos Czech
Model	W100
YOM	1967/2004
Condition	Good Condition
Photo	See Photo
Spindle Dia.: 100 mm, Travels: X=1650 mm, Y=1000 mm, Z=1150 mm, W=900 mm, Table : 1250 x 1250 mm, DRO : Heidenhein. Total weight: 17T.

445

ID	MA17172
Make	Wotan,West German
Model	B105S
YOM
Condition	Very good condition
Photo	See Photo
Spindle dia 105 mm, Spindle travel 420 mm, Spindle taper ISO 50 , Vertical travel Headstock 1200 mm, Cross travel Y 1600 mm, Longitudinal travel X 1500 mm, Table dimensions 1100 x 1400 mm, Max. Load 12 tons, R.P.M. 9 - 1.000 (17x) kW 7,5

446

ID	MA17147
Make	Tos Czech
Model	W100
YOM	1966
Condition	Excellent
Photo	See Photo
spindle dia 100 mm.

447

ID	MA17144
Make	WMW Union ,Germany
Model	BFP125/1
YOM	1960
Condition	Complete,working condition
Photo	See Photo
spindle dia 125 mm, faceplate 800 mm, floor plate 3000x3500 mm, rotary table 1800x2000 mm and load on table 10 tons

448

ID	MA17110
Make	Tos Czech
Model	W100A
YOM	1975
Condition	Very good condition
Photo	See Photo
spindle dia 100 mm.table 1200 x 1200 mm

449

ID	MA17109
Make	Tos Czech
Model	W100
YOM	1973
Condition	Very good condition
Photo	See Photo
spindle dia 100 mm.

450

ID	MA17101
Make	Tos Czech
Model	wh80p
YOM	1978
Condition	Good Condition
Photo	See Photo
spindle dia 80 mm, table 1100 x 1100 mm.

451

ID	MA17078
Make	WMW Union ,Germany
Model	BF80
YOM
Condition	Good Condition
Photo	See Photo
Spindle Dia. : 80 mm, Table : 1150 x 1000 mm, Travels : X=1000 mm, Y= 900 mm, Z= 1000 mm, Face Chuck : 500 mm, With tailstock and face chuck.

452

ID	MA17041
Make	Tos Czech
Model	WH13
YOM
Condition	Under power
Photo	See Photo
Diameter of working spindle: 130 mm, Travel X: 2500 mm, Travel Y: 2000 mm, Travel Z: 2000 mm, Taper in spindle: ISO 50, Spindle revolutions: 22 degrees: 5,6-710 rpm, Clamping surface of table: 1800x1800 mm, Max. loading of table: 5000 kg, Working spindle extension: 800 mm, Working traverses: -I.: 0,75-150 mm/min, -II.: 15-3000 mm/min, Rapid traverse: 3 000 mm/min, Electric motor for spindle: 30 kW, Total input: 36 kW, Machine dimensions: 5 930x6 200x3 900 mm, Machine weight: 35 000 kg.

453

ID	MA17034
Make	Wotan,West German
Model	C105D
YOM	1978
Condition	Very good condition
Photo	See Photo
Spindle = 130mm, Travels:X=2500mm, Y=1900mm, Z=1000mm, W=700mm, Table= 1600x1400 mm, Table load capacity= 6000 kp, Spindle turning speed range= 0-1250 u/min, Feeds = 0,025-1600 mm/min, Tool Taper = SK 50, spindle support bearing, cross slide, Digital read out.

454

ID	MA17013
Make	Cornac
Model	BS65
YOM	1972
Condition	Good Condition
Photo	See Photo
Spindle: Sans, Travels: X= 800 mm, Y= 610 mm, Z= 900 mm, dia. Alesage max : 300 mm, Rotate Table: 550 x 550 mm.

455

ID	MA17012
Make	Ceruti
Model	Cermat100
YOM	1972
Condition	Good Condition
Photo	See Photo
Spindle: 100 mm, Travels: X= 18300 mm, Y= 1400 mm, Z= 1500 mm, dia. Alesage max : 500 mm, Rotate Table: 1450 x 1100 mm, Max. Load: 4 T.

456

ID	MA17011
Make	Ceruti
Model	Alematic100
YOM	1964
Condition	Good Condition
Photo	See Photo
Spindle: 100 mm, Travels: X= 1500 mm, Y= 1100 mm, Z= 850 mm, dia. Alesage max : 500 mm, Rotate Table: 1300 x 1000 mm, Max. Load: 2.5 T.

457

ID	MA17002
Make	Tos Czech
Model	W100
YOM
Condition	Excellent condition,almost new
Photo	See Photo
turning table 1250x1250 mm, x 1600mm, y 3100mm, z 1400mm, digital read-out 4 axes, total length 6020mm, total width 3500mm, total height 3000mm, machine weight 17,500 kg.

458

ID	MA16874
Make	Ceruti
Model	AB75
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 75 mm , facing chuck , DRO

459

ID	MA16873
Make	Ceruti
Model	AC100
YOM
Condition	Good Condition
Photo	See Photo
spindle dia 100 mm , facing chuck , DRO

460

ID	MA16851
Make	Tos Czech
Model	H100A
YOM	1964
Condition	Good Condition
Photo	See Photo
spindle diam. 100 mm, taper MT 6, tabel size 1250 x 1250 mm, travel (X/Y/Z/W): 1000/1250/1250/950 mm, load on table max. 3000 kg. With face plate, tailstock, DRO 3 axis.

461

ID	MA16754
Make	WMW Union ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Spindle 110 mm, Spindle Stroke 900 mm, Table Length 5000 mm, XYZ Traverse:X= 4000mm, Y= 1500mm, Z= 1500mm.

462

ID	MA16455
Make	IMUB Bacau,Romania
Model	AFD100
YOM	1979
Condition	Good Condition
Photo	See Photo
spindle dia 100 mm, Boring spindle, taper ISO 50 (MORSE 5) , Milling spindle diameter 140 mm , Table diameter 1100x1300 mm , Speeds of boring shaft 12,5 � 1180 rot/min , Boring shaft axial travel 700 mm , Vertical travel of broach toward table 1000 mm , , Chuck plate diameter 300 mm , Slide stroke on chuck plate 180 mm , Max. facing diameter 850 mm , Speeds of chuck plate 12,5 � 190 rot/min , Main motor power 11 Kw , Total installed power 14,5 Kw , Machine weight 15.8 tons.

463

ID	MA15828
Make	Scharmann
Model	Opticut FB50/75
YOM
Condition	Very good condition
Photo	See Photo
Travels: X=800 mm, Y=700 mm, Z=600 mm, Spindle SK 40, Table: 560 x 560 mm, Heidenhain Positip 850 DRO (3 axis).

464

ID	MA15054
Make	Kuraki,Japan
Model	KBT752
YOM	1973
Condition	Good condition,under power
Photo	See Photo
Spindle 75 mm Table 950 x 850 Stroke X 1000 Stroke Y 900 Stroke Z 1000 With Support

465

ID	MA15033
Make	Kuraki,Japan
Model	KBT752
YOM	1973
Condition	Good condition,under power
Photo	See Photo
Spindle 75 mm , Table 950 x 850 mm, With Support .

466

ID	MA15029
Make	Shinada
Model	SB100
YOM	1973
Condition	Good condition,under power
Photo	See Photo
Spindle dia 100 mm , Table 1100 x 1300 mm, Stroke 1600 x 1600 x 1200 mm, With Face Plate : 500 mm. Qty: 2 Nos.

467

ID	MI4831
Make	Collet
Model
YOM
Condition	Under power
Photo	See Photo
Spindle Dia. 100 mm, Travels : X Axis 1900 mm, Y Axis 1600 mm, Z Axis 2500 mm, Table : 1300 x 1200 mm,With Facing Chuck, No tail stock.

468

ID	MA13881
Make	Chinese
Model	TX6111C/3
YOM	Brand New
Condition	Brand New
Photo	See Photo
spindle dia 110 mm , table 1250 x 1250 mm , X 1600 mm , Y 1300 mm , Z 1400 mm , W 600 mm.

469

ID	MA13880
Make	Chinese
Model	TX6113C/2
YOM	Brand New
Condition	Brand New
Photo	See Photo
spindle dia : 130 mm , X travel : 2000 mm , Y travel : 1600 mm , Z travel : 2000 mm , W travel : 900 mm, Rotary Table : 1600 x 1400 mm, Max. Load on Table : 10 Tons, Spindle Taper : ISO 50, Spindle Speed : 6.6 - 755 RPM, 4 Axis DRO, Total Weight : 33 Tons

470

ID	MA11682
Make	VWF Plauert Wetzel
Model	BFN100/180
YOM
Condition	Good Condition
Photo	See Photo
Spindle dia 100mm, X 2000mm, Y 1500mm, Z 2000mm, Speed 9-1400 U/min, weight 16000 kg, electric power 14,4 kW, face chuck,digital read out,several attatchment of tool.

471

ID	MA10646
Make	Chinese
Model	TPX6111B
YOM
Condition	Brand New
Photo	See Photo
Spindle dia 110 mm, table size 1100 x 960 mm,spindle taper: morse No.6 (ISO 7:24 NO.50) optional, max. spindle torque 1225 Nm, max. facing head torque 1960 Nm, max. spindle thrust 12250 N, max. traverse of boring spindle 600 mm, no. of spindle speed 22, range of spindle speed 8-1000 r/min., travel of facing slide 180 mm, max. permissible load on table 2500 kg, distance between spindle axis and table surface 900 mm, table travel: 1000 x 900 mm, traverse rapid for spindle headstock,worktable 2500 mm/min., range of spindle headstock and table feeds per spindle revolution 0.04-6 / 0.01-1.88 mm/r, power of main drive motor 7.5 kW, overall dimensions: 4910 x 2454 x 2750 mm, weight of machine 13 tons,

VKengg.co.in

Category : Boring Mills

Sub-Category : Borer Horizontal Table Type