Category : Drilling Machines

Sub-Category : Drilling Deep Hole

Total Machines Found : 44

Select | Machine Details
 
  1
IDMA37461
MakeUTITA
ModelAF 200
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Min/Max Drilling capacity: 30-120 mm
Max. boring diameter : 200 mm
Max. workpiece diameter: 400 mm
Drilling length: 5650 mm
Spindle speed: 3400 rpm
 
  2
IDMA37460
MakeHeidenreich & Harbeck/Makino
ModelB 2 P 2
YOM
ConditionGood Condition
PhotoSee Photo
height from bed to centre of drill: 315 mm
max. reaming Ψ: 178,3 mm
bed length: 9400 mm
drilling depth approx.: 3150 mm
feed range stepless: 70 - 1750 mm/min
rapid traverse speed: 4,25 m/min
drilling headstock, bore: 62 mm
main spindle speed: 180 - 1000 rpm
Main spindle drive: 380 V, 15 kW
Machine weight: 6,6 t
 
  3
IDMI9964
MakeUTITA
ModelAF-200
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Max drilling capacity -20 mm
 
  4
IDMA36895
MakeSTANKO
ModelRT263322
YOM1989
ConditionGood Condition
PhotoSee Photo
Deep Hole Drilling
Part Diameter 300mm
Hole Diameter 80-250mm
Processing Length 1000-2500mm
 
  5
IDMA36415
MakeBroadbent
Model
YOM
ConditionGood Condition
PhotoSee Photo
Deep Hole Borer x 10,000mm
Hollow spindle headstock 15”
Headstock speeds 11.5 -350 rpm
Headstock drive motor 75kw
Centre height over bed 22”
32” dia 4 jaw chuck on headstock
Overall length of bed 85`
Max boring length in one pass approx. 32`(10,000mm)
Boring saddle with variable speed drive
2 x boring bar pedestals
Sealing head saddle (two sealing heads )
4 x 3 point open roller steadies 18” capacity
Rear swarf trolleys and baskets running on rear tray
 
  6
IDMI8109
MakeVDF German
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Total Bed Length – 5940 mm
Chuck Diameter – 400 mm
Rest fixing the Detail with Diameter – 300 mm
Min. X Max. Tool Dia. – 64 mm x 210 mm
Max. Machining Length – 3000 mm
Max. Job Length – 4000 mm
Total Rod Length – 3540 mm
Total No. of Tools - 57
Weight 4 to 5 Ton
 
  7
IDMA35544
MakeRyazan Russia
Model
YOM2007
ConditionGood Condition
PhotoSee Photo
Boring Capacity
Solid boring: 30-100mm
Trepanning: 250mm
Counter boring: 250mm
Boring length: 4000mm
Capacity
Total width of bed 630mm
Width of slide ways 160mm
Swing over bed 850mm
Hardened bed ways
Work Piece Headstock
Main motor power 30kw
Infinitely variable speeds 40 – 500 RPM
Number of spindle speeds 12
Torque 3000 Nm
Spindle bore 90mm
Boring Carriage
Counter Rotation 30kw Motor
Counter Rotation Speeds 100 – 630rpm
Number of Speeds 9
Rapid Movement in both directions 5000mm/m
Infinitely variable working feeds 0 – 3000mm/m
Torque 2000Nm
Boring thrust 50,000N
Work Piece Steady
1 x 3 Point closed steadies
Max. holding capacity 300mm
Boring Bar Supports
2 x Boring bar supports
Auto oil drip feed for lubrication
Boring Operation
Solid boring
Pull boring or counter boring
Total weight Approx. weight 28,000kg

Standard Equipment
Fan cooled cabinet
Pipes for coolant system
Cable carrying chains
Oil & chips discharge pipe
Interlock safety guards
Hydraulic unit & pipework for clamping of sealing head saddle
Lantern Style Chuck
Touch Screen Control
Sealing Head
Selection of Boring Bars
Swarf Conveyor & Tank
Boring Bar drive clamps,
Boring bar bushes,
 
  8
IDMI8007
MakeVDF German
ModelB8S
YOM
ConditionGood Condition
PhotoSee Photo
10 metres
Technical details attached.
 
  9
IDMI8006
MakeSkoda Czech
ModelVHR500/6000
YOM
ConditionGood Condition
PhotoSee Photo
Max bore: 500 mm
swing: 1000 mm
Maximum drilling diameter: 740 mm
Maximum drilling length:6000 mm
Minimum drilling length:1000 mm
Workpiece weight:10000 kg
Face plate dia:900 mm
Max power:145 kw
Machine weight:27500 kg
 
  10
IDMA35278
MakeTMT
Model
YOM
ConditionGood Condition
PhotoSee Photo
Working dia: 80 - 500 mm
Through holes: 11.000 mm
Unthrough holes: 11.000 mm
Possible to see it working
 
  11
IDMA34977
MakeRyazan Russia
Model
YOM1986
ConditionGood Condition
PhotoSee Photo
Dia of work piece -300 mm , Depth of length - 1500 mm
 
  12
IDMA34976
MakeRyazan Russia
Model
YOM1984
ConditionGood Condition
PhotoSee Photo
Dia of work piece -300 mm , Depth of length - 2000 mm
 
  13
IDMA34975
MakeRyazan Russia
Model
YOM1983
ConditionGood Condition
PhotoSee Photo
Dia of work piece -300 mm , Depth of length - 2000 mm
 
  14
IDMA34974
MakeRyazan Russia
Model
YOM1981
ConditionVery good condition
PhotoSee Photo
Dia of work piece -300 mm , Depth of length - 2000 mm
 
  15
IDMA34973
MakeRyazan Russia
ModelRT60172
YOM1986
ConditionGood Condition
PhotoSee Photo  |  See Video
Max Diameter of workpiece :- 300 MM
Max Depth of length :- 4500 MM
Weight of machine is 21,5 ton.
 
  16
IDMA34518
MakeRyazan Russia
ModelRT60126
YOM1975
ConditionGood Condition
PhotoSee Photo
Max diameter of work piece: 300 mm.
Max depth of length: 3000 mm
 
  17
IDMA34283
MakeRyazan Russia
ModelRT2631127
YOM1996
ConditionGood Condition
PhotoSee Photo  |  See Video
Diametre detale — 50 -320mm
Diametre hole — 40 — 250mm
Lenght detale — 600 — 2500mm
Weight detale — 1500kg
 
  18
IDMA34265
MakeRyazan Russia
ModelRT60171
YOM1985
ConditionGood Condition
PhotoSee Photo
Drilling depth, mm 3000
Outer diameter, mm 300
Core drilling diameter, mm 40.80
Boring diameter, mm 50.250
Height of centers , mm 315
Spindle turning speed range, rpm 100.630
Drive output power, kW 18
Range of feeding movements, mm/min 5.3000
Drive output power (feed box), kW 4,8
Cooling pump, l/min 180.360
Weight of the machine, kg 17500
 
  19
IDMA34175
MakeRyazan Russia
ModelRT2631127
YOM1995
ConditionGood Condition
PhotoSee Photo
Workpiece's length - 600.2500mm
Outer diameter - 50.320mm
Centers height - 315mm
Counter-boring hole's diameter - 250mm
Dimensions - 12200x2020x2850mm
Weight - 18000kg
 
  20
IDMA33722
MakeSIG
ModelB312/2,5
YOM
ConditionGood Condition
PhotoSee Photo
Boring length - 2500 mm
Boring diameter - 8.60 mm
Dimensions - 13000 x 3550 x 3000 mm
Weight - 15500 kg
There are 2 such machines available
 
  21
IDMA33702
MakeSIG
ModelB31/2
YOM1981
ConditionGood Condition
PhotoSee Photo
Solid material drilling diameter – 20.120 mm
Circular drilling – up to 120 mm
Counter boring diameter – 160 mm
Boring length – 2000 mm
Dimensions – 5500 x 15000 mm
Weight – 14000 kg
 
  22
IDMA33160
MakeRyazan Russia
ModelRT263223
YOM
ConditionGood Condition
PhotoSee Photo
Range of external work-piece diameters: 50-300 mm
Range of work-piece lengths: 2500-7000 mm
Diameter of chiseled openings: 250 mm
Max. work-piece weight: 4300 kg
Max. stroke length of the headstock: 7900 mm
Turning number (work-piece headstock): 80-500 rpm
Cutting feed rate (headstock): 5-3000 mm/min
Quick traverse (headstock): 5000 mm/min
Max. spindle torque: 2,6 kN*m
Cooling pump: 300 l/min
Drive output power (work-piece headstock): 30 kW
Drive output power (feed box): 8 kW
Total power requirement of machine electric motors: 63,5 kW
Overall machine dimensions (including electric equipment):
-Length: 22950 mm
-Width: 2500 mm
-Height: 2020 mm
Machine weight (including electric equipment): 26400 kg
 
  23
IDMA33139
MakeRyazan Russia
ModelRT60126
YOM1973
ConditionGood Condition
PhotoSee Photo
Work-piece lenght:
-Min: 400 mm
-Max: 1500 mm
External work-piece diameter:
-Min: 100 mm
-Max: 300 mm
Height of the centers over the bed guides: 315 mm
Diameter of boring opening: 250 mm
Range of working feeds: 5-300 mm/min
Rapid feeding: 3000 mm/min
Amount of spindle speeds: 12
Range of a spindle rotation: 53-800 rpm
Machine dimensions:
-Length: 7200 mm
-Width: 2300 mm
-Height: 1500 mm
Machine weight: 14000 kg
 
  24
IDMA33082
MakeGildemeister Knoll
ModelB4P2x3000
YOM1986
ConditionGood Condition
PhotoSee Photo
Max diameter of boring is 815 mm
Max diameter of drilling is 120 mm
Depth of length is 3000 mm
Main motor 67 kW
Weight of machine 15 ton
 
  25
IDMA32969
MakeGildemeister Knoll
ModelB4P2x3000
YOM1986
ConditionGood Condition
PhotoSee Photo
Drilling depth 3000mm Max
Full drilling in steel max. 120 mm
Max diameter of work piece : 815 mm
Height center 375mm
Power of motor 67 kW
Weight of machine 15 ton
 
  26
IDMA32904
MakeMorando
ModelFCN3x1000
YOM1976
ConditionGood Condition
PhotoSee Photo
MUST OVERHAUL THE NC
Coring diameter - max. 31.75 mm
Drilling depth 1000 mm
x-travel 6000 mm
y-travel 2500 mm
Number of spindles 3 pieces
Spindle speeds 250 + 3000 rpm
Max. 250 rpm
Feed range 12.7 +645 mm / min
1. COOLONG RESERVOAR 350х150х250
2. GROUND 1 510х200х60 ; GROUN. 2- 530х200х60
PLUS THE SADLE OF COLONE
3. COLONE 500х150х180
4. SUPPORT 400х140х180
5. CHIP CONVEYOR 500х200х150
6. ANGLE TABLE 200х200х300
7. ELECTRIK 400х200х70
8. TABLE 710х270х40
9. LITTLE SHNECK 750х250(277)х40
10. CONTREWEIGHT ???? - 6-8 т
11.ZENTRIFUGE 150х150х100
 
  27
IDMA32901
MakeRyazan Russia
ModelRT401
YOM1970
ConditionGood Condition
PhotoSee Photo
There are 2 such machines available.
Boring diameter - 400 mm
Boring length - 4000 mm
 
  28
IDMA32882
MakeRyazan Russia
ModelRT60407
YOM1979
ConditionGood Condition
PhotoSee Photo
Boring length - 5500 mm
Outter diameter - 100.400 mm
 
  29
IDMA32696
MakeRyazan Russia
ModelRT604
YOM1989
ConditionGood Condition
PhotoSee Photo
Drilling depth, mm 600.4500
Outer diameter, mm 100.400
Core drilling diameter, mm 40.80
Boring diameter, mm 50.360
Spindle turning speed range, rpm 100.630
Drive output power, kW 30
Tool spindle turning speed, rpm 40.500
Drive output power (workpiece headstock), kW 20/28
Range of feeding movements, mm/min 5.300
Drive output power (feed box), kW 4,8
Cooling pump, l/min 180.360
Chip conveyor, units 2
Weight of the machine, kg 23300
 
  30
IDMA32265
MakeGildermeister & Knoll
ModelM04-2-2000NG
YOM1986
ConditionGood Condition
PhotoSee Photo
Boring from solid: 50 mm
Number of spindles: 2
Counter bore with moreta one cutter: 130 mm
Counter bore with one cutter: 160 mm
Skiving and burnishing upto: 160 mm
RPM: 10 - 400 min-1
Boring length: 1900 mm
Coolant system: 36000 Liter
The machine is still under power. You can see it under running condition. The tooling is not with the machine. They put a new control in 2002 on this machine, since then the machine was running only 600 hours.
 
  31
IDMA32235
MakeGildemeister Knoll
ModelB4P
YOM1986
ConditionGood Condition
PhotoSee Photo
Boring length - 3000mm
Boring diameters:
- solid drill - 120mm
- cicular drill - 300mm
- counter-drilling - 300.400mm
Centers height - 325mm
Weight - 15000kg
 
  32
IDMA32177
MakeFuji
Model
YOM1981
ConditionGood Condition
PhotoSee Photo
Max OD 4.5" (112 mm)
Boring Depth: 270" (6750 mm)
 
  33
IDMA32176
MakeFritz Werner
Model
YOM1991
ConditionGood Condition
PhotoSee Photo
Max OD 2.2" (55 mm)
Boring Depth: 100" (2500 mm)
 
  34
IDMA32175
MakeVDF Boehringer
Model
YOM1970
ConditionGood Condition
PhotoSee Photo
Max OD 7.0" (175 mm)
Boring Depth: 100" (2500 mm)
 
  35
IDMA32174
MakeVDF Boehringer
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max OD 5.0" (125 mm)
Boring Depth: 100" (2500 mm)
 
  36
IDMA32173
MakeVDF Boehringer
Model5S
YOM1966
ConditionGood Condition
PhotoSee Photo
Max OD 4.0" (100 mm)
Boring Depth: 240" (6000 mm)
 
  37
IDMA31981
MakeSTANKO
ModelPT2942
YOM
ConditionGood Condition
PhotoSee Photo
DRO Heidenhein
Centers height: 400mm
Max. working length: 7000mm
Max. drilling diam: 40.80mm
Max. boring diam: 50.85mm
Max. workepiece weight: 10000kg
Workpiece spindle RPM: 40.750
Tool spindle RPM: 100.630
Continuous drilling - 7000mm on one stalk. But with the use of drilling technology and the skill of the drillman, the machine can drill with a flip of 16,500 mm
 
  38
IDMA31324
MakeTacchi
ModelFT 70-S
YOM1998
ConditionGood Condition
PhotoSee Photo
600 x 3500 CNC Counter-Rotating Deep Hole Boring Machine With Bottle Boring (U Axis)
CNC Control: Siemens 820
Swing over bed: 1200 mm
Max. boring depth: 3500 mm
Max. Weight of job: 8000 Kg
Machine weight: 28,000 Kg
Solid boring: 20 – 350 mm
Trepanning: 50 – 550 mm
Counter boring: 550 mm
Spindle speeds: 50 – 500 RPM
Number of speed ranges: 3
Main motor power: 100 Kw
Spindle nose: 375 mm
Dia. of 3 jaw self cantering chuck: 600 mm
Max. and Min. clamping Dia.: 50 – 500 mm
Machine bed length: 11200 mm
Bottle Boring (full u axis)
1 x Steady
1 x Anti vibration dampener (hydraulic)
High pressure coolant / filtration / oil management
1 x Special swarf conveyor
 
  39
IDMA31235
MakeVDF,Wohlenberg
ModelB800P
YOM
ConditionGood Condition
PhotoSee Photo
Z-travel : 4060 mm
Bed width : 530 mm
Bore depth : 2750 mm
Full boring : 18 - 100 / 250 mm
Spindle bore : 104 mm
Centre height : 400 mm
Drilling depth : 2750 mm
Spindle speed : 85 - 1120 Upm
Swing diamete : 800 mm
Swing over bed : 800 mm
Table - indexing : 4 x 90 ° mm
Work piece power : 37 kW
Borehole diameter : 355 mm
Table surface area : 1550 x 1550 mm
Table load capacity : 9000 kg
Working spindle drive : 75 kW
Total power requirement:ca : 130 kVA
Workpiece length - max : 3050 mm
Core drilling diameter max : 50 - 355 mm
Spindle diameter in front bearing : 160 mm
 
  40
IDMA31228
MakeMechanika
ModelIRLE ITB 80
YOM2008
ConditionGood Condition
PhotoSee Photo
Control system, indication - Heidenhain
Measuring the Heidenhain ROQ Rotary Sensor
Measuring Linear LS 186 C., LS 186 C
Max. workpiece length mm 1600
Min. workpiece length mm 490
Max. hole diameter mm 75
Max. table load kg 50 00
Extension of hose socket mm 300
Horizontal motion of the headstock mm 2000
Vertical movement of the machine mm 800
Horizontal spindle head mm 580
Spindle speed continuously
1st rpm 0-204
2nd rpm 0-506
3rd rpm 0-1212
shifts
1st working max. mm / min 100
2nd stage rapid traverse max. mm / min 400
Vertical displacement of the machine continuously
3rd level max. mm / min 200
Power kW 40
Main engine power kW 20
Machine weight kg 30,000
Chip and oil management with filtration and magnetic separation to 3,000 liters of cutting oil
Recommended drilling oil EJEKTOL HV- PLUS - 3000 liters
 
  41
IDMA30777
MakeWohlenberg
Model
YOM
Condition
PhotoSee Photo
x 9M Model: B8
Max Boring Depth in one pass: 9000 mm
Swing Over Bed: 825 mm
Boring in Solid: 18 - 150 mm
Trepanning: 50 - 355 mm
Counter-Boring: upto 450 mm
Centre Height: 400 mm
Spindle Bore: 163 mm
Spindle Speeds: 56 - 450 RPM Max.
Weight of Workpiece:- * With 1 Steady: 6300 Kg * With 2 Steady: 8000 Kg * With 3 steady: 10000 Kg
Connected Load: 45 - 700 Kw
Max. Torque: 5000 Nm
 
  42
IDMI6735
MakeWMW
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Dia. : 90 mm,
Between Center : 2.5 m.
 
  43
IDMA30299
MakeTibo
ModelB30-1500
YOMRetrofit in 2009
ConditionGood working condition
PhotoSee Photo
Diameter 30 mm,
Length 1500 mm.
 
  44
IDMA29262
MakeVDF Boehringer
ModelB630-4000
YOMRetrofitted in 2007
ConditionGood Condition
PhotoSee Photo
Maximum boring length : 4000 mm,
Solid boring : 15 – 130 mm,
Counter boring up to : 250 mm,
Max. Torque : 4500 Nm,
Main motor : 55 kw,
Rotary table : 1250 mm x 1750 mm with 0.1 degree "B" Axis, adjustable 500 mm either side of centre for offset boring, programmed through,
Two 400 mm capacity hydraulic vices,
Back bed section with headstock and 3 jaw chuck to allow boring up to max. 4000 mm,
Siemens AC servo motors,
Siemens TP 177A with SPS Siemens S7-200 touch screen control.
top