VKengg.co.in

Category : EDMs Wire

Sub-Category : EDM Wire CNC

Total Machines Found : 37

Select | Machine Details
 
  1
IDMA35804
MakeFanuc
ModelROBOCUT a-C400iA
YOM2013
ConditionGood Condition
PhotoSee Photo
Eroding hours: 16438 h
Technical details:
– X-travel: 370 mm
– Y-travel: 270 mm
– Z-travel: 255 mm
Control: FANUC 31i-WB
Max. workpiece dimensions: 700 x 600 x 250 mm
Max. workpiece weight: 500 kg
U/V-axis travel: ±60 x ±60 mm
wire diameter: 0,10 – 0,30 mm
Max. wire weight: 16 kg
Operating voltage: AC 200/220 V, 3 phases, 50/60 Hz
Total connected load: 13 kVA
Inclusive:
– Dielectric preparation
– Coolant unit
– Leftover wire basin
– Adjusting piece for wire positioning
– Several documentation and data backup
– Clamping devices
– Automation ZIMMER & KREIM
 
  2
IDMA35781
MakeSodick,Japan
ModelAQ1200
YOM2011
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 1200, Y - 800, Z - 400 mm
wire erosion machine
max. workpiece size X: 1600 mm
max. workpiece size Y: 1200 mm
max. workpiece size Z: 400 mm
max. workpiece weight: 4000 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 1220/820 mm
 
  3
IDMA35780
MakeSodick,Japan
Model
YOM2011
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 1200, Y - 800, Z - 400 mm
wire erosion machine
max. workpiece size X: 1600 mm
max. workpiece size Y: 1200 mm
max. workpiece size Z: 400 mm
max. workpiece weight: 4000 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 1220/820 mm
 
  4
IDMA35700
MakeMitsubishi
ModelMV4800S
YOM2016
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 800, Y - 600, Z - 310 mm
wire erosion machine
max. workpiece size X: 1250 mm
max. workpiece size Y: 1020 mm
max. workpiece size Z: 305 mm
max. workpiece weight: 3000 kg
table size X: 1080 mm
table size Y: 780 mm
with AWF ( Automatic Wire Feeding )
U / V axis: +/- 75 mm x +/- 75 mm
submerged
cooling unit
2 clamping bars on table
device for holding 25 kg coils
 
  5
IDMA35556
MakeSodick,Japan
ModelAG400L
YOM2011
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 400, Y - 300, Z - 250 mm
max. workpiece size X: 600 mm
max. workpiece size Y: 470 mm
max. workpiece size Z: 240 mm
max. workpiece weight: 500 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 120 x 120 mm
submerged
max. taper cut: +/- 25°
 
  6
IDMA35555
MakeSodick,Japan
ModelSL400Q
YOM2013
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 400, Y - 300, Z - 250 mm
wire erosion machine
max. workpiece weight: 500 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 120 x 120 mm
submerged
max taper cut: +/- 25°
work tank: 850 x 756 mm
 
  7
IDMA35554
MakeSodick,Japan
ModelSL-400G
YOM2013
ConditionGood Condition
PhotoSee Photo
SPECIFICATIONS:
X-AXIS TRAVEL 15.75"
Y-AXIS TRAVEL 11.81"
Z-AXIS TRAVEL 9.84"
TAPER +/- 25 DEGREES
MAX.WORKPIECE DIMENSIONS 33" X 24" X 11"
AUTO THREADING(YES/NO) YES
SUBMERGED (YES/NO) YES
CONTROL CNC (SPW)
DIMENSIONS 83"X 122" X 88"H
WEIGHT 7400 Lbs
EQUIPPED WITH:
LINER DRIVES
SPW CNC CONTROL FOR EFFICIENT ROUGH MACHINING & HIGH PRECISION MACHINING
TOUCH SCREEN
CE COMPLIANT ENCLOSURE
CHILLER
 
  8
IDMA35553
MakeSodick,Japan
ModelAQ535L
YOM2004
ConditionGood Condition
PhotoSee Photo
X-AXIS TRAVEL:21.6"
Y-AXIS TRAVEL:13.7"
Z-AXIS TRAVEL:11.8"
TAPER:Yes
AUTO THREADING (YES/NO):Yes
SUBMERGED (YES/NO):Yes
CONTROL:CNC (LQ1W)

EQUIPPED WITH:
Jumbo Feeder
Chiller
Quantity: 2 nos
 
  9
IDMA35475
MakeALPHA
Model
YOM2006
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 320, Y - 220, Z- 180 mm
Wire erosion Machine
Max. Workpiece Size X : 650 MM
Max. Workpiece Size Y : 450 MM
Max. Workpiece Size Z : 180 MM
Max. Workpiece Weight : 500 kg
with AWF ( Automatic Wire Feeding )
U/V axis; +/- 60 MM X +/- 60 MM
 
  10
IDMI7997
MakeSodick,Japan
ModelAQ327L
YOM
ConditionGood Condition
PhotoSee Photo
Max. Work piece Size: 22.4"x16.5"x9"H
Travels: 14.57"x10.63"x9.84"
UV Travels 4.72"x4.72"
Max. Workpiece Weight: 1,100#
Wire Diameter .006" - .012"
Wire Speed 16.54"/Second Max
Taper Cut +/- 25 Degrees at 4"
Power Supply Amps 40 Amps
Inside Tank Dimensions: 34"x25.4"
Dielectric Fluid Capacity: 600 Litres
Dimensions: 62"x107"x84"H
Weight: 7,500#
Equipped With:
Sodick LQ1W Gold CNC Control
Misc. Spare Parts
 
  11
IDMA34939
MakeAgiecut
ModelChallenge 2 eCut
YOM2004
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 350, Y - 250, Z - 256 mm
wire erosion machine
max. workpiece size X: 750 mm
max. workpiece size Y: 550 mm
max. workpiece size Z: 250 mm
max. workpiece weight: 450 kg
with AWF ( Automatic Wire Feeding )
submerged
 
  12
IDMA34938
MakeAgietron
ModelSpirit2
YOM2007
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 300, Y - 250, Z - 250 mm
diesinking machine
max. workpiece size X: 630 mm
max. workpiece size Y: 380 mm
max. workpiece size Z: 165 mm
max. workpiece weight: 200 kg
C-axis
without tool changer
 
  13
IDMA34526
MakeSodick,Japan
ModelAQ750L
YOM2005
ConditionGood Condition
PhotoSee Photo
SPECIFICATIONS:

X-AXIS TRAVEL 29.5"
Y-AXIS TRAVEL 19.7"
Z-AXIS TRAVEL 15.8"
WORK TANK DIMENSIONS 49.8" X 38.3"
AUTO THREADING (YES/NO) YES
SUBMERGED (YES/NO) YES
CONTROL CNC (LQ33W)
DIMENSIONS 83" X 11" X 93"H
WEIGHT 12,000 LBS

EQUIPPED WITH:

Wire spool
Manuals
Dielectric filter
 
  14
IDMA34520
MakeSodick,Japan
ModelAQ327L
YOM2006
ConditionGood Condition
PhotoSee Photo
Max. Work piece Size: 22.4"x16.5"x9"H
Travels: 14.57"x10.63"x9.84"
UV Travels 4.72"x4.72"
Max. Workpiece Weight: 1,100#
Wire Diameter .006" - .012"
Wire Speed 16.54"/Second Max
Taper Cut +/- 25 Degrees at 4"
Power Supply Amps 40 Amps
Inside Tank Dimensions: 34"x25.4"
Dielectric Fluid Capacity: 600 Litres
Dimensions: 62"x107"x84"H
Weight: 7,500#
Equipped With:
Sodick LQ1W Gold CNC Control
Misc. Spare Parts
 
  15
IDMA34476
MakeMitsubishi
ModelFX10
YOM1997
ConditionGood Condition
PhotoSee Photo
Max. Workpiece Size: 800.10mm x 574.04mm x 218.44mm
Table Size: 629.92mm x 529.84mm
X-Axis Travel: 350.52mm
Y-Axis Travel: 248.92mm
Z-Axis Travel: 218.44mm
U/V-Axis Travel: +/ 0.00mm
Taper Capacity: 15° +/- in 101.60mm
 
  16
IDMA34342
MakeSodick,Japan
ModelAQ55L
YOM1999
ConditionGood Condition
PhotoSee Photo
Table : 750* 550
Tank size :950 *725 *410
Stroke x:550,y:400,z: 350
Power : LN1 / 40A
ATC 16.
 
  17
IDMA34290
MakeSodick,Japan
ModelAQ550L
YOM2000 & 2003
ConditionGood Condition
PhotoSee Photo
Sodick wire cut

LN1W,
Table size : 790 x 500,
Stroke : X - 550 Y - 350 Z- 320,
Wire diameter φ : 0.15-0.3,
Wire feed speed : 25 mm/sec,
Wire tension : 3-25N,
Max workable : 750 x 500 x 310,
Dipping : 750 x 500 x 280,
Max Weight : 1500 kg.
 
  18
IDMA34219
MakeCharmilles
ModelRobofil 6050TW
YOM2008
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 630, Y - 400, Z - 160 mm
wire erosion machine
max. workpiece size X: 1260 mm
max. workpiece size Y: 690 mm
max. workpiece size Z: 360 mm
max. workpiece weight: 800 kg
table size X: 950 mm
table size Y: 620 mm
with AWF ( Automatic Wire Feeding )
U / V axis: +/- 48 mm
 
  19
IDMA34200
MakeCharmilles
ModelRobofil 310
YOM1992
Condition
PhotoSee Photo
Travel Axes : X - 400, Y - 250, Z - 400 mm
wire erosion machine
max. workpiece size X: 850 mm
max. workpiece size Y: 500 mm
max. workpiece size Z: 400 mm
max. workpiece weight: 1000 kg
with AWF ( Automatic Wire Feeding )
 
  20
IDMA34199
MakeSodick,Japan
ModelAQ325L
YOM2002
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 350, Y - 250, Z - 220 mm
wire erosion machine
max. workpiece size X: 550 mm
max. workpiece size Y: 450 mm
max. workpiece size Z: 200 mm
max. workpiece weight: 300 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 80 x 80 mm
 
  21
IDMA34123
MakeSodick,Japan
ModelAD55L
YOM2014-11
ConditionGood Condition
PhotoSee Photo
600 x 400mm
 
  22
IDMI7448
MakeElectronica,India
ModelEcocut
YOM
ConditionGood Condition
PhotoSee Photo
Max. table size: 370 x 600 mm,
Max. work piece height: 200 mm,
Max. work piece weight: 300 kg,
Main table traverse (X,Y): 250,350 mm,
Auxiliary table traverse (u,v): 30,30 mm,
Max. taper cutting angle: ±5/100 mm,
Max. wire spool capacity: 6 kg,
Dry run speed: 80 mm/min,
Wire diameter: 0.25 mm (standard)0.2 mm (optional)
Generator- Elpuls-15
Display: Colour LCD
Min input command: 0.001 mm,
Interpolation function: Linear & circular
Simultaneously controlled axes: X,Y,u,v
Min resolution for X,Y, u,v:0.001 mm,
Data Input/output: USB 2.0- Keyboard
RS232C Isolated serial interface
Input power supply: 3 phase, AC415V*, 50Hz
Connected load: 3 kVA
Average power consumption: 1.3 to 2.3 kVA
Dielectric unit
Dielectric fluid: Deionised water
Tank capacity: 140 litres
Paper filter: 10u single cartridge
optional mineral filtration system
 
  23
IDMA33857
MakeSodick,French
ModelAQ325L
YOM2001
ConditionGood Condition
PhotoSee Photo
Strokes: 350 x 250 x 220 / UV: 80 x 80
Table: 600 x 400
Maximum part dimensions: 600 x 400 x 220
Maximum piece weight: 450 kg
Wire diameter: 0.15 - 0.30
PRICE: 20,000 Euros
Greetings: Stevo Kwiek
 
  24
IDMA33852
MakeBrother
ModelHS70A
YOM
ConditionGood Condition
PhotoSee Photo
TABLE STROKE (X / Y): 16.1" / 10.2"
Z AXIS STROKE: 6.7"
MAXIMUM WORKPIECE DIMENSIONS: 22.8" X 15.3" X 6.7"
MAXIMUM WORKPIECE WEIGHT: 770 LBS.
MAXIMUM MACHINING SPEED: 28 SQ. IN./HR.
OPTIMUM SURFACE ROUGHNESS: 0.01 ΅INCH RA
MAXIMUM TABLE FEED SPEED: 12 IPM
WIRE DIAMETER: 0.004", 0.006", 0.008", 0.01", 0.012"
WIRE GUIDE SYSTEM: ROUND DIAMOND
WIRE FEED SPEED: 1.57 - 9.84 IPS
U AND V AXIS STROKE: +/-1.28" X +/-1.28"
DIELECTRIC FLUID FEED SYSTEM: SUBMERGED TYPE/FLUSHING TYPE
OAD (APPROXIMATE): 41" X 66" X 76" HIGH
WEIGHT (APPROXIMATE): 3080 LBS.
EQUIPPED WITH:
BROTHER CNC INTERFACE CONTROL
 
  25
IDMI7320
MakeRattanparkhi
Model
YOM
ConditionGood Condition
PhotoSee Photo
2100 hrs running
 
  26
IDMA33668
MakeSodick,Japan
ModelSL600Q
YOM2014
ConditionGood Condition
PhotoSee Photo
Travel Axes : X - 600, Y - 400, Z - 350 mm
wire erosion machine
max. workpiece weight: 1000 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 120 x 120 mm
submerged
cooling unit
L-CUT wire chopper
Jumbo feeder
work tank 850 x 756 mm
 
  27
IDMA30037
MakeFanuc Robocut
ModelAlpha1A
YOM1997
ConditionExcellent
PhotoSee Photo
X Axis Travel : 450 mm,
Y Axis Travel : 300 mm,
Z Axis Travel : 300 mm,
U/V Travel +/- : 30 mm,
Max Work-piece Dimensions : 650 mm x 500 mm x 300 mm,
Max Work-piece Weight : 650 kgs / 450 submerged,
Machine Dimensions : 2700 mm x 2400 mm x 2150 mm,
Machine Weight : 2300 kgs.
Control : Fanuc : 16w.
 
  28
IDMA29913
MakeCharmilles
ModelROBOFORM400
YOM1990
ConditionGood Condition
PhotoSee Photo
X-Axis Travel : 17.72″,
Y-Axis Travel : 12.59″,
Z-Axis Travel : 8.66″,
C-Axis Travel : 360 Deg,
Worktable Size : 33.5″ x 22.05″,
Worktable Weight Capacity : 1100 Lbs,
Worktable to Electrode Chuck : 27.5″,
Maximum Speed : 20 RPM,
Work Tank Dimensions : 44.5″ x 31.5″,
Work Tank Depth : 16.14″,
Electrode Head Capacity : 44 Lbs,
Approx. Machine Dimensions : 107″ x 83″ x 108″,
Approx. Weight w/Full Tank : 8270 Lbs,
Approx. Weight w/Empty Tank : 7500 Lbs.
 
  29
IDMA29595
MakeCharmilles
ModelRobofil2020-1
YOM1992
ConditionGood Condition
PhotoSee Photo
X-320 Y-220 Z-120,
Table 990Χ500Χ150.
with Robot
 
  30
IDMI6502
MakeElectronica,India
ModelUltracut843
YOM2005
ConditionGood Condition
PhotoSee Photo
Model: Ultracut843
YOM: 2005
 
  31
IDMI6470
MakeCantilever
ModelG100
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3 ton.
Work Tank : 1300 X 800 X 550 mm,
Work Table : 1000 x 600 mm,
T slots : 5 of 12,
Long travel X : 600 mm,
Cross travel Y : 300 mm,
Max permissible load : 2000 kgs,
Quill travel Z : 300 mm,
Max electrode wt : 150,
Max day light : 700 mm,
max work piece height : 450 mm,
Quill servo : DC stepper imported motor,
Dielecinic caoacity : 1000 Lts,
Max Filtration : 10 microns,
Max working limit : 75,
Impulse voltage : 200,
Pulse on time : 0.5-3000,
Max MRR cu-steel : 450,
Max MRR GR-Steel - EDM (I) : 700,
Best surface finish : 0.3,
Min electrode wear : 0.3%
Power supply : 6 KVA.
 
  32
IDMA29237
MakeSodick,Japan
ModelAQ535L
YOM2000
Conditionexcellent working condition
PhotoSee Photo
LH1W,
Table size : 790 x 500,
Stroke : X-550 Y-350 Z-300,
UV axis : 80 x 80,
Max workable : 750 x 500 x 290,
Dip : 750 x 500 x 270,
Wire diameter : 0.15-0.3,
Auto wiring.
 
  33
IDMA29236
MakeSodick,Japan
ModelAQ550L
YOM2000 & 2001
Conditionexcellent working condition
PhotoSee Photo
LN1W,
Table size : 790 x 500,
Stroke : X - 550 Y - 350 Z- 320,
Wire diameter φ : 0.15-0.3,
Wire feed speed : 25 mm/sec,
Wire tension : 3-25N,
Max workable : 750 x 500 x 310,
Dipping : 750 x 500 x 280,
Max Weight : 1500 kg.
 
  34
IDMA29145
MakeMitsubishi
ModelPX05
YOM2000
ConditionGood Condition
PhotoSee Photo
T : 500 Χ 450,　
S : X - 220 Y - 150 Z - 150,　
Max workable : 500Χ390Χ145,
Max Weight : 100 Kg,　
Wire dia : 0.05-0.3 mm,　
Auto wire connection attached.
CNC Control system W11FX2.　
 
  35
IDMA29125
MakeCharmilles
ModelRobofil2020-1
YOM1995
ConditionGood Condition
PhotoSee Photo
X-travel : 320 mm,
Y-travel : 180 mm,
Z-travel : 120 mm,
Dimensions (L x W x H ) : 1,8 x 2,2 x 2,35 + cabinet + tank m,
Weight about : 3000 kg.
 
  36
IDMA29124
MakeCharmilles
ModelRobofil2030SI-TW
YOM2001
ConditionGood Condition
PhotoSee Photo
Dimensions (Width x depth x height) : 3690 x 2520 x 2295 mm,
Total weight (without dielectric) : 4400 kg,
X, Y, Z Travels : 318 x 218 x 114 mm,
Movement measurement system : linear glass scale,
X, Y, Z measurement resolution : 0.0001 mm,
U, V travel : ± 48 mm,
Taper angle/height : ± 30°/65 degree/mm,
Collision protection : axes U, V, Z,
Tank dimensions (Width x depth x height) : 990 x 505 x 260 mm,
Max. workpiece height : 260 mm,
Max. workpiece weight : 500 kg,
Weight and type of spool available (to JIS standard) : P3 and P5.
Dielectric system :-
Filter type : 16 built in paper cartridges,
Reservoir capacity : 900 Ltr,
Power supply,
Incoming 3 phase voltage : 400 V,
Erowa Robotic system.
 
  37
IDMA27952
MakeMitsubishi
ModelDWC110H
YOM
Conditionexcellent working condition
PhotoSee Photo
X Axis Travel : 295 mm,
Y Axis Travel : 443 mm,
Table Size : 640 x 591 mm,
Maximum Workpiece Dimensions : 542 x 590 x 256 mm,
Maximum Workpiece Weight : 1433 lbs,
Rapid Traverse : 51.18 ipm,
Wire Diameter Capability : 0.0 - 0.325 mm,
Taper Capacity : +/- 12 Deg. in 100 mm,
Table Resolution : .000004"
Maximum Amperage : 50 Amps,
Floor space requirement : 2500 x 3000 mm,
Approximate Machine Weight : 6300 lbs.
Control : Mitsubishi.
Qty : 2 nos
top