VKengg.co.in

Category : Forging Equipment

Sub-Category : Press Cold Forging Hydraulic

Total Machines Found : 5

Select	| Machine Details
1	ID MA36349 Make Neagari,Japan Model YOM Condition Good Condition Photo See Photo  |  See Video Stroke: 1000mm Opening: 1800mm Bolster Size: 700 x 1000mm Adapter Plate: 700 x1000mm Descending Speed:250mm/sec Working speed: 30-18mm/sec Raising speed: 250mm/sec Knock out capacity: 80 Ton Knock out Adjust:200mm Pump: 255KG/cm 550 1/mm Motor: 220KW 6P 3300V 60Hz Oil capacity: 4600 Litres.
2	ID MA29046 Make Lasco Model TSP200SO YOM Condition Good Condition Photo See Photo Capacity : 250 ton, Stroke : 800 mm, Daylight : 1400 mm, Table size (left to right) : 1000 mm, Table size (front to back) : 1000 mm, Ram (left to right) : 1000 mm, Ram (front to back) : 800 mm, Approach speed : 315 mm/sec, Pressure speed at F max : 35 mm/sec, Lower ejector : 1, Lower ejector (power) : 6,5 t, Lower ejector (speed) : 130 mm/sec, Lower ejector (stroke) : 450 mm, Driving power overall : 55/380/50 kW / V / Hz, Dimensions W x D x H : 2350 x 1550 x 6800 mm, Height of machine above floor : 5800 mm, Total Weight : 38 t. Working pressure : 28 bar, Oil quantity : 2000 I.
3	ID MA29045 Make SMG Model HKP160-1000/750 YOM Condition Good Condition Photo See Photo Capacity : 160 ton, Stroke : 750 mm, Daylight : 1250 mm, Table size (left to right) : 1000 mm, Table size (front to back) : 750 mm, Ram (left to right) : 1000 mm, Ram (front to back) : 750 mm, Approach speed : 500 mm/sec, Pressure speed at F max : 70 mm/sec, Return speed : 425 mm/sec, Lower ejector (power) : 26 t, Lower ejector (stroke) : 270 mm, Upper ejector (power) : 16 t, Upper ejector (stroke) : 150 mm, Driving power : 160 Kw, Total Weight : 24 T.
4	ID MA29044 Make Sack & Kiesselbach Model OKP250-35 YOM Condition Good Condition Photo See Photo Capacity : 250 ton, Stroke : 300 mm, Daylight : 1100 mm, Table size (left to right) : 800 mm, Table size (front to back) : 650 mm, Table height : 840 mm, Ram (left to right) : 800 mm, Ram (front to back) : 650 mm, Approach speed : 350 mm/sec, Pressure speed at F max : 14 mm/sec, Return speed : 250 mm/sec, Lower ejector : 1, Lower ejector (power) : 35 t, Lower ejector (speed) : max 120 mm/sec, Lower ejector (stroke) : 25 mm, Upper ejector : 1, Upper ejector (power) : 35 t, Upper ejector : max 120 mm/sec, Upper ejector (stroke) : 25 mm, Driving power overall : 60/380/50 kW / V / Hz, Dimensions W x D x H : 2350 x 1750 x 5050 mm, Height of machine above floor : 5050 mm, Total Weight : 12 t. Working pressure : 260 bar, Oil quantity : 600 I.
5	ID MA28734 Make Mori Japan Model MSF800 YOM August 2014 Condition Brand New Photo See Photo Type : Side frame. Capacity : 800 ton, Bolster : 850 x 800 mm, Slide : 800 X 800 mm, Side opening : 560 W x 900 H, Open Height : 900 mm, Stroke : 400 mm, The main cylinder (RAM type) : 600 mm diameter, Impressive force : 23 tons, No-load speed : rising 300 mm/s, Falling : 300 mm/s, Pressing speed : 12-15 mm/s, 12 mm/s (400 tons), 16 mm/s (up to 400 tons), Maximum operating pressure : 28.3 MPa, Pressure lowering and stopping accuracy : plus or minus 0.1 mm, Work surface height : 935 mm, (Upper knock out), Output : 1.5 to 5 ton, Stroke : 30 mm, Rising speed : 50 mm/s, Lowering speed : 50 mm/s, (Lower knock out), Output : 40 tons, Stroke : 25 mm, Rising speed : 30 mm/s, Lowering speed : 30 mm/s, Knock out pin diameter : 55 mm, (Hydraulics), Main pump : variable displacement piston pump (Mitsubishi), Discharge : up to 300 liters /min. Pressure : 28.5 Mpa. One auxiliary pump, The main motor : 90 kW-6P, 200V 50HZ, (Mold change devices), Hydraulic Die Lifter : 2.45 t X 2, Hydraulic die clampers : Air : 03 MPa.