VKengg.co.in

Category : Forging Equipment

Sub-Category : Press Forging Hydraulic

Total Machines Found : 9

Select	| Machine Details
1	ID MA38180 Make Emuco Model YOM 1986 Condition Good Condition Photo See Photo Capacity - 1000 Ton Table Size - 900 x 900 Ram Stroke - 250 mm Shut Height - 820 mm Ram Adjustement - 17.5 mm Height
2	ID MI9709 Make HMT Model H4s-1000-400-200T CH003 YOM 1995 Condition Good Condition Photo See Photo Bed Size : 4000x2000mm Daylight: 1200mm Stroke : 800mm Main RAM Rapid Approach Speed - 300mm / sec Pressing Speed - 133mm/sec Main Ram Return Speed : 300mm/sec Height Of Bed Over floor : 400mm No of Axis - 4 ( Beam , Cushion , FM&BM)
3	ID MA32777 Make Amino Model YOM Condition Good Condition Photo See Photo Capacity: 200 ton, Stroke: 800 mm, Daylight: 1200 mm, Bolster: 1600 x 1200 mm, Descending speed: 100 mm/sec, Working speed: 6 mm/sec, Raising speed: 75 mm/sec, Die cushion: 5-50 tons, Cushion stroke: 150 mm, Cushion pad: 1100 x 800 mm Cushion Speed: 23 mm/sec
4	ID MA31853 Make Russian Model PA2646 YOM 1988 Condition Good Condition Photo See Photo Capacity: 4000 ton, Nominal return stroke force: 400 ton, Nominal force of the lower ejector: 400 ton, The force of the upper ejector: 250 ton, Dimensions of the working surface of the sliding table: 2500 x 2500 mm, The distance between the lower and upper shatmpovoy plates with the upper position of the mobile beam: 3200 mm, The largest stroke of the mobile traverse: 1200 mm, The greatest stroke of the lower ejector: 600 mm, The largest table travel in one direction is 2500 mm, Distance between the columns - to the left - to the right: 2800 ,,. Front back: 1500 mm, Machine weight: 400 ton
5	ID MA31771 Make Hudraulick Model 9606.00P YOM 1982 Condition Good Condition Photo See Photo Working liquid - water and emulsion Quantity of steps - 2 pieces Nominal effort stages of 1-15000 tons steps of 2-30,000 tons working cylinders -4 pcs distance between the axes of columns: 3500х3500 mm distance between columns in the light of: 2600 x 2600 mm mobile table: working surface size :2500 x 3000 mm one way move from the axis of the press - 3500 mm dimensions plane - 16140 x19750 mm Level up height - 9290 mm Level depth -9900 mm Total height - 19190 mm weight press - 1660 T total weight - 2365 T mode of operation - soft, unstressed, short-term.
6	ID MA31516 Make Model YOM Condition Good Condition Photo See Photo The nominal force of the press on the steps: - first-stage – 500 T; - second stage – 1400 T; - third stage – 2000 T. Permissible eccentricity – 160 mm. The greatest stroke of the movable traverse – 1600 mm. The distance between the table and the movable traverse in its upper position – 3150 mm. The distance between the stroke of the limiter across the axis of forging – 2240 mm. The distance between the stroke limiter along the axis of the forging – 1120 mm. Sliding table size: -Width – 1600 mm; -Length – 4000 mm. Table travel: 1600 mm on each side. Table speed: 50-300 mm/sec The force of the ejector – 100 T. Ejector stroke over Desk – 560 mm. Working fluid-water emulsion. The pressure of the working fluid – 320 kgs/sm2. Pump productivity: 2250 L/min Dimensions: - Width – 12470 mm; - Length – 17840 mm; - Height – 13740 mm; - Height above floor – 8900 mm. Press weight: 440 ton.
7	ID MA31038 Make Amino Model FFP40WA YOM 1991 Condition Good Condition Photo See Photo Inner press  Operating Pressure: 1,000x3=3,000tonf  Cylinder Output: Max. 100 tonf  Stroke: 1,600mm  Daylight: 2,300mm  Table Dimensions: 2,150x1,300mm  Allowable Upper Die Weight: 20ton  Down Speed: 280mm/sec  Rising Speed: 280mm/sec  Pressurization Speed  1) 1000ton 42-28mm/sec  2) 3000ton 14-10mm/sec    Outer press  Out Capacity: 1,000 tonf  Cylinder Output: Max 100 tonf  Stroke: 1,600mm  Daylight: 2,300mm  Table Dimension: 3,500x2,400mm  Maximum Punch Dimension: 2,150x1,300mm  Allowable Upper Die Weight: 20ton  Down Speed: 300 mm/sec  Rising Speed: 300 mm/sec  Single Down Speed: 300 mm/sec  Single Rising Speed: 300 mm/sec    Single Acting  Capacity: 400-2,000 tonf  Cylinder Output: Max. 160 tonf  Stroke: 1,600mm  Daylight: 2,300 mm  Table: 3,500x2,400mm  Allowable Upper Die Weight: 30 ton  Down Speed: 280-300 mm/sec  Rising Speed: 280-300 mm/sec  Pressurization Speed: 42-14 mm/sec  Bolster Area: 3,500x2,400mm  Up-light Between left and right column: 3,500mm    Die Cushion  Specification  Die Cushion Output: 60-300 tonf  Die Cushion Output Setting: 6 point  Die Cushion Position Setting: 6 point  Pushing Cylinder Output: 30 tonf  Stroke Adjustment Cushion: 300mm  Bed Dimension: 2,800x1,800mm  Die Cushion Rising Speed: 100 mm/sec  Bed Position Setting Method: Position Controller  Bed Position Indication method: Digital Display  Max Blank Holder Weight: 20 ton  Operating: Electromagnetic Clutch  Die cushion upper limit position and output change point can be set by digital switch.
8	ID MA29569 Make Chinese Model YOM Condition Brand New Photo See Photo Nominal capacity : 200 MN, Diameter of main cylinder : 1600 mm, Pressure of main pump : 25 Mpa, Working pressure of hydraulic cylinder : 100 Mpa, Return capacity : 6000 KN, Liquid working pressure : 100 Mpa, Max. daylight : 2300 mm, Max. stroke of slider : 800 mm, Speed at approach : 180 mm/s, Pressing speed : 15-30 mm/s, Return speed : 180 mm/s, Size of movable working table : 2400 × 2400 mm, Forging eccentricity : 300 mm, Total power : 2400 kW, Cycle time ≤1 min.
9	ID MA28008 Make Chinese Model P152 YOM Condition Excellent condition,under power Photo See Photo Max. press forcing when the press is under accumulator: 800 tons, Max. mobile cross- bar stroke: 1000 mm, Table stroke with right and left transpotion: 2000 mm, Pressure in the filler tank a) max kg/sm2= 320 Water pressure power in main cylinders when the n machine is under accumulator kg/sm2 200 Overall dimensions of the machine with the table a) from left to right ; 14680 mm, b) from the rear to the front: 9665 mm, Total machine weight: 138 tons, The delivery completer set: a press 800 ton,the complete set of pumps of a high pressure,high pressure tanks the current condition 30 tons manipulator.