VKengg.co.in

Category : Forging Equipment

Sub-Category : Press Hydraulic

Total Machines Found : 56

Select	| Machine Details
1	ID MA38364 Make Schuler Model YOM Condition Good Condition Photo See Photo Pressing force 20 mm before the lowest stroke position:500 t Pressing force 25 mm before the lowest stroke position:400 t Width between the stands below the oil collecting trays Width between the stands at the height of the oil collecting trays. 2990 mm 3250 mm Table surface: width x depth:2750x1500 mm Ram surface: width x depth:2750x1500 mm Stroke of the ram:850 mm Passage in the table: width x depth:2210x 980 mm Largest permissible drawing :depth250 mm Adjustability of the plunger:325 mm Side opening in the stands Width x height Number of falls per minute 12-24 Maximum braking distance 204 mm Engine power for the main drive 100 kW Main engine speed per minute 800-1600 Motor power for the tappet adjustment Speed ​​of the adjustment motor per minute Motor power for adjusting the pulling device Speed ​​of the adjusting motor per minute 1506 kW 1385 kW Working capacity can be seen on page 1/2. Pneumatic ejector in the ram: Number of printing cylinders Number of printing plates Area of ​​the common pressure plate: Width x depth Piston stroke Total force at 6 kgf/cm² 6 .1905x1000 mm 150 mm 46 t Compressed air pulling device in the table: 2 two-chamber compressed air pulling devices PZa 900d/250 with fixed Housing and movable piston attached to the table, including 1 pressure box. Electrically adjustable limit Piston travel by push button operation. Display of the adjustment path via rotary reports. Hydraulic locking device for locking the air cushions in lower lifting position. High gear hydraulically dampened. Number of double cylinders Number of printing plates 2 1 Area of ​​common pressure plate, width x depth piston diameter 2200x970 mm 900 mm Piston stroke 250 mm Total force at 6 kgf/cm². 140 t
2	ID MA38336 Make Japan Model YOM 1997 Condition Disassembled Photo See Photo STROKE:2000mm OPEN HEIGHT:3000mm BOLSTER AREA:4800*2800mm
3	ID MA38254 Make Muller Model YOM 1999 Condition Good Condition Photo See Photo Table - x (mm) 1200 Slide - stroke (mm) 250 Table - width (mm) 1200 Frame (H/C) H FRAME Conditions WORKING Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) OLEODYNAMIC Table - y (mm) 1000 Slide - y (mm) 1000 Slide - adjustable stroke (mm) 250 Piston rods 1 Slide - number of guides 8 Approaching speed 250 Rising speed 250 Tdc span (mm) 730 Front span between the pillars (mm) 1370 Lateral window (mm) 400 External dimensions - X (mm) 2200 External dimensions - Y (mm) 2000 External dimensions - height (mm) 5600 Slide - x (mm) 1200 Weight (ton) 28 Subtype (DM / CDC) DOUBLE UPRIGHT Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) HYDRAULIC Electrical components - number of motors 2 Electrical panel conditions (working/missing/complete inspection/inspection required) WORKING Cylinder block YES Mechanical lock YES Table - depth (mm) 1000 Slide - width (mm) 1200 Slide - depth (mm) 1000 Push points 1 Sled - number of guides 8 Approach speed 250 Ascent rate 250 Light pms (mm) 730 Front gap between uprights (mm) 1370 Side window between the uprights (mm) 400 External dimensions - width (mm) 2200 External dimensions - depth (mm) 2000 External dimensions - height above ground (mm) 5600 Electrical components - No. of motors 2 Conections electrical panel (working, missing, overhauled, to be overhauled) WORKING Cylinder block valve YES Mechanical block of the slide YES
4	ID MA38026 Make Loire Safe Model YOM 1998 Condition Good Condition Photo See Photo DOUBLE POST HYDRAULIC PRESS FOR HOT CALIBRATION TYPE: ESSM - 315/8 - 8/7 - 3 e Characteristics - Maximum force of use. 310 to 3150 - Restoring force 310 - Slide stroke 300 - Maximum opening between table and slide 700 - Useful dimensions of the table - Left-right 800 - Front-back 800 - Frontal passage between uprights 850 - Slide guide height 700 - Table height on zero level 750 - Maximum sliding torque m x Tm 10 - External dimensions of the press. - Left-right 1,550 - Front-back 950 - Weight approx. 15,000 - Total height 4,600 e Speeds - Approachmm/sec 300 - Work: - Up to 230 tones mm/sec 48 - From 230 to 315 tones, self-adjustable mm/sec 48 to 35 - Limitation of maximum working speed mm/sec 48 to 5 - Reminder, adjustable mm/sec 5 to 300 - Downtime msec 191 - Stopping distance. 305
5	ID MA37995 Make Kongo Model YOM 1983 Condition Good Condition Photo See Photo  |  See Video Stroke1200 mm Downward speed 160 mm/sec Stopping time 180 ms Emergence stop 20 ms Table 2000 x 1500 mm
6	ID MI10167 Make Model YOM Condition Good Condition Photo See Photo CAPACITY :1000 TONS TABLE SIZE :40*40 WITH HYDRAULIC UNIT WITH MOTOR
7	ID MA37554 Make Muller Model YOM Condition Good Condition Photo See Photo Tabel Size 2000 x 3200 CODICE 11-1 DIMM PIANO
8	ID MA37553 Make Mossini Model 630 YOM Condition Good Condition Photo See Photo Tabel Size 6300 x 2400mm Passing 2800 Hieght 800 MM Cnc Hiednen WeIght Around 70 Ton
9	ID MA37448 Make COMESSA Model PHM 630 T YOM 1980 / 2001 Condition Good Condition Photo See Photo Height Over Floor : 7200mm Operation Height :750mm Weight : 48000kg Table Size : 1600mm x 1300mm Ram Size : 1600mm x 1300mm Distance Between Columns : 1656mm Stroke Press : 800mm Max Daylight : 1250mm Stroke Cusion : 400mm Press Capacity : 630T Cusion : 100T Installation Pit : 1500mm Voltage : 400V AC Current : 55Kw Phase : 3 Frequency : 50Hz
10	ID MA37185 Make Kongo Model YOM Condition Good Condition Photo See Photo  |  See Video Capacity -150 ton Stroke 1200 mm Daylight 1600 mm Bolster 2500 x 1500 mm Slide 2400 x 1500 mm Die Cushion 50 tons Cushion Stroke 300 mm Cushion Pad 1400 x 950 mm Top Tilting Plate 100 Degrees
11	ID MA36873 Make Spiertz Model HPS400 YOM Condition Good Condition Photo See Photo CAPACITY 400T STROKE 700 mm TABLE 1200x900 mm RAM 1500x1300 mm APPROACH SPEED 400 mm/s RETURN SPEED 290 mm/s WORKING SPEED (nominal capacity 100% to 40%) 11-27 mm/s MOTOR 55 KW CUSHION 12T STROKE 200 mm
12	ID MA36698 Make Lasco Model VP800 YOM Condition Good Condition Photo See Photo Press capacity : 800T Press capacity : 25T Retraction force of the ram : 50T Stroke: 1100mm Surface of the press ram : 1100 x 1100mm Upper ejector (stroke) : 750mm Surface of the press table : 1120 x 1100mm Light expanse between de guides : 1150mm Engine power : 2 x 200; 22; 5,5;1,5 Kw Operating voltage : 380V Control voltage : 220V Oil quantity : 4500I Height of machine above floor : 7000mm Total weight : 96000kg With separat ejector unit
13	ID MA36369 Make Southwark Model H-500 YOM Condition Good Condition Photo See Photo TONNAGE.: 500 STROKE.: 36" DAYLIGHT.: 60" BED SIZE.: 108" X 144"
14	ID MA36363 Make Model D0437 YOM Condition Good Condition Photo See Photo Capacity - 500 Ton Rated force, kN 5000 Slider travel, mm 600 Distance between table and slider, mm 1400 Power of the engine of the main movement kW 10 Table size width/length mm 950/1000 Machine dimensions Length Width Height (mm) 2550_1700_3745 Weight kg 14200
15	ID MA34704 Make Gigant Model YOM 2010 Condition Good Condition Photo See Photo Power: 1200 ton Numbers of pistons: 2 Table dimensions (X-Y): 4000x2500 mm Slide dimensions (X-Y): 4000x2500 mm Stroke: 1500 mm Light at dtc: 2000 mm Work speed to 100% 16 mm/sec Work speed to 50% 34 mm/sec Work speed to downhill: 450 mm/sec Work speed to uphill: 320 mm/sec Cushion n° : 4 Power cushion 600 ton Stroke cushion: 400 mm Cushion table domensions (X-Y) 3500x2100 mm Features: Third effect power 150 tons - Stroke 200 mm - Dimension of the table of the third effect 2500x1200 Accessories: Frantal moving bloster Dimension: Front x Deep x Height 6000x4200x9200 mm Weight: 150 Tons Machine coindition: Working Electric plant coinditions: Working
16	ID MA33715 Make Model YOM Condition Photo See Photo Hydraulic Press Sack 750 t Press Capacity- 750 tons, Stroke- 705 mm, Daylight- 1920 mm, Sliding table- 1800 mm, Turning device upper saddle- 530 mm, Width of saddle- 750 mm, Open column passage- 1400 mm, Diameter of columns- 300 mm Wepuko drive included- 4x200 KW drive
17	ID MA33050 Make Russian Model P6332B YOM 1988 Condition Good Condition Photo See Photo 160 ton press Slider stroke, mm 500 The distance between the table and the slider, mm 750 The distance between the table and the slider, mm 750 Main engine power kW 15 Table size width / length mm 630/800 Machine dimensions Long Width Height (mm) 1250 x 2090 x 3500 Weight kg 7400
18	ID MA33048 Make Russian Model PB6332 YOM 1988 Condition Good Condition Photo See Photo 160 ton press Slider stroke, mm 500 The greatest distance between a table and a slider, mm 750 Table dimensions: from left to right, mm 800 Table dimensions: front - back, mm 630 Drive power, kW 15
19	ID MA32976 Make Amino Model YOM 1977 Condition Good Condition Photo See Photo Capacity: 400 ton T: 1500 x 2500 mm cusion
20	ID MA32970 Make Russian Model AA6138 YOM Condition Good Condition Photo See Photo Capacity: 630 ton, Weight:177 ton
21	ID MA32738 Make Kojima,Japan Model HSP-1500 YOM Condition Good Condition Photo See Photo Max force: 1500 Ton Cushion force: 300 Ton Stroke length: 1500 mm Cushion stroke: 300 mm Daylight: 2200 mm Table dimensions: 4000x2500 mm Cushion dimensions: 3250x1900 mm Speed : Operating RAM speed (min): 23 mm/s Operating RAM speed (max): 120 mm/s Return speed: 590 mm/s
22	ID MA32702 Make Lasco Model KP500Se YOM Condition Good Condition Photo See Photo Pressing force 500 to. Retraction force 40 to. Ram stroke 450 mm Ejector force 16 to. Discharge stroke 100 mm / s
23	ID MA32651 Make Ube,Japan Model YOM 1979/2008 Condition Good Condition Photo See Photo Dimensions of recipient; - Diameter of 132mm x 560mm - Diameter of 127mm x 560mm - 90mm diameter x 555 mm Efficiency - Squeezing (maximum tonnage) at 210kg / cm2 800 M Ton - Squeezing (minimum tonnage) at 210kg / cm2 697 M Ton - Servo-side depth. the piston rod forward at 210kg / cm2 112 M Ton - Servo-side depth. rod return at 210kg / cm2 63 M Ton - Sealing recipient at 210kg / cm2 69 M Ton - Opening recipient at 210kg / cm2 94 M Ton - Puncture at 210kg / cm2 102 M Ton - Shift matrix at 210kg / cm2 12 M Ton - Stroke depth. cylinder 1320mm - Stroke cylinders recipient 250mm Maximum speed - Squeezing the maximum tonnage of 38.0mm / sec - Squeezing the minimum tonnage of 44.0mm / sec - Sealing recipient 350mm / sec - Opening recipient 330mm / sec - Puncture 300mm / sec Pumps - with variable axial plunger Kawasaki BZ74FS-210R-AR150 210kg / cm2 x 450 liters / minimum 1000 rpm / minimum 2 pieces. - Fixed-speed paddle TOKYO Keiki SQP43-50-30-86-cc-29-15 70kg / cm2 x 148/88 liters / minimum 1000 rpm / minimum 1 pieces. - With constant axial plunger UCHIDA RPF20-15-A-LA-220 210kg / cm2 x 14 liters / min 1000 rpm / min 1 pc. - Supply pump Kawasaki IMO 60-4N5YA 15kg / cm2 x 545 liters / min 3000 rev / min 2 pieces. - Recipient heating power 22kW Machine is available without inductor heater
24	ID MA31931 Make ZSRR Model DG2432A YOM 1988 Condition Good Condition Photo See Photo Table (800 x 710) mm
25	ID MI7033 Make Wellman Model ENEFCO YOM Condition Good Condition Photo See Photo Hydraulic 500 ton forging/ extrusion press Hydraulic 500 ton forging/ extrusion press Stroke 800 mm shut hight 1600 mm L-R 800 mm F-B 1100 mm with hydraulic ejector/cousin, power 90 kw/120 hp and accumulator
26	ID MA31521 Make Kojima,Japan Model YOM Condition Good Condition Photo See Photo Main Press Capacity 60 - 300 tons Daylight 2150 mm Stroke 1250 mm Table 1380 x 1000 mm Adjust 80 mm Descending Speed 400 mm/sec Working Speed 30 - 120 mm/sec Slide 1700 x 900 mm Raising Speed 400 mm/sec Clamping Press Capacity 30 - 150 tons Slide 1200 x 600 mm Daylight 1800 mm Stroke 1250 mm Descending Speed 400 mm/sec Working Speed 30 - 120 mm/sec Slide 1700 x 900 mm Raising Speed 400 mm/sec Counter Knockout Press Counter Capacity 30 - 147 tons Knockout Capacity 75 - 147 tons stroke 500 mm Knockout Pin 132 mm Knockout Speed Up 80 - 160 mm/sec Knockout Speed Down 165 mm/sec Trimming Capacity 48 tons stroke 100 mm Raising Speed 50 mm/sec Down Speed 80 mm/sec Mail Motor 132 Kw The press is used for punching holes into sliding yokes and housing ends, can be used for other application also. parts photo are attached.
27	ID MA31518 Make St.Lawrence Model YOM 1988 Condition Good Condition Photo See Photo Ad line: 2,000 ton St Lawrence hydraulic press, 4 post design, 43" stroke, 72" daylight, 72" x 95" bed area, 125 ton hydraulic cushion, built in 1988 Tags: press hydraulic, hydraulic stamper, hydraulic draw press, hydraulic forming press tonnage: 2,000 stroke: 43" daylight: 72" bed area: 72" x 95" speeds: 12 ipm 24 ipm 36ipm 48 ipm Equipped With 5) 125 hp motors, hydraulic unit, bolster plate 7 1/2" thick, 125 ton hydraulic cushion
28	ID MA31498 Make Faitoole Model HFA 630 YOM 1989 Condition Good Condition Photo See Photo Plate thickness : 16 mm slider: total nominal force : 630 min. stroke : 30 mm stroke : 150 mm cutting speed, min . : 3 mm / s cutting speed, max : 50 mm / s approach speed : 120 mm / s return speed : 135 mm / s V-ring: nominal force : 320 stroke : 40 mm Reverse slider: nominal force : 160 stroke : 40 mm DIMENSIONS OF ACCESSORIES: bottom table - width: 910 mm bottom table - depth: 1350 mm top table - width : 900 mm top table - depth: 900 mm clearance, max : 410 mm Belt feeder: type: roller feeder: nominal force : 6000 kN leaf width, max : 450 mm sheet thickness, max : 16 mm feed step, min : 1 mm
29	ID MA31436 Make Kawasaki Model YOM Condition excellent working condition Photo See Photo Capacity: 500 ton Low Speed 100～500 ton High Speed 0～200 ton Automatic 260～500 ton Pressure Adjusting Range 42.4～212 kg/cm2 Rising Capacity 37t / 212 kg/cm2 Stroke 1,000 mm Daylight 1,800 mm Shut Height 800 mm Bolster 3,500 X 1,800 mm Slide 3,500 X 1,800 mm No Load Decending Speed 260 mm/s Speed Under Pressure High Speed 80 mm/s (140t)～57 mm/s (200t) Low Speed 32 mm/s (350t)～22 mm/s (500t) Automatic 22 mm/s Raising Speed Main Press only 260 mm/s Up thrust press 170 mm/s Number of presses Main Press 1 x 300 ton Side Press 2 x 100 ton Balancer Press Capacity 120 ton Pressure 212 ton Stroke 1000 mm Cylinders 2 x 60 ton Cushion Press Capacity 30～150 ton Pressure 41.4～207 kg/cm2 Stroke 300 mm Cushion Pad 3,000 X 1300 mm Quantity 2 x 75 ton Up Thrust Press Capacity 15 ton Pressure 105 kg/cm2 Raising Speed 170 mm/s Stroke 300 mm Quantity 1 Moving Bolster Pressure 45kg/cm2 Bolster Size 3,500 X 1,800 mm Bolster Traverse Speed 60 mm/s Max Load when moving 55 ton Bolster Stroke 2,100 mm Bolster Movement Front Movement Cylinders 1
30	ID MA31403 Make Dnepropress Model DB2240A YOM 1983 Condition Good Condition Photo See Photo Nominal effort 10000 kN, Central ejector nominal effort: - on work stroke 1600 kN, - on reverse stroke 800 kN, Central ejector stroke 250 mm, Side ejector nominal effort: - on work stroke 250 kN, - on reverse stroke 200 kN, Side ejector stroke 350 mm, Ram stroke 1000 mm, Movable table size 1250x1250 mm, Movable table travel 1500 mm, Time for holding workpiece under pressure 0-480 min, Overall dimensions L?W?H 6400?5030?9800 mm, Height over floor 6500 mm, Weight 69800 kg
31	ID MA31378 Make SAJ- France Model HE-630 YOM Condition Good Condition Photo See Photo CAPACITY 630T YEAR STROKE 80 mm TABLE AREA 600x650 mm AYLIGHT 350 mm APPROACH SPEED WORK SPEED RETURN SPEED MOTOR 30 KW TANK CAPACITY DIMENSIONS: WIDTH: 950 mm DEPTH: 500 mm HEIGHT: 2000 mm
32	ID MA31265 Make Fukui Model YOM Condition Good Condition Photo See Photo Capacity Type : 350 ton Stroke : 800 mm Daylight : 1300 mm Bolster : 2130 x 1520 mm Slide : 2130 x 1520 mm Lowering Speed : 205 mm/sec Speed Under Pressure : 30-50mm/sec Raising Speed : 205mm/sec Die Cushion : 200 ton Cushion Stroke : 400 mm
33	ID MA31198 Make LITOSTROJ Model YOM Condition Good Condition Photo See Photo Capacity : 400 ton. Table : 1,5 x 1,6 m Stroke : cca 1000 mm
34	ID MA31180 Make Kawasaki Model YOM 1972 Condition Good Condition Photo See Photo Capacity : 500 ton Low Speed : 100-500 ton High Speed : 40-200 ton Automatic : 260-500 ton Pressure Adjusting Range : 42.4～212 kg/cm2 Rising Capacity : 37t/212kg/cm2 Stroke : 1,000 mm Daylight : 1,800 mm Shut Height : 800 mm Bolster :3,500 X 1,800 mm Slide : 3,500 X 1,800 mm No Load Decending Speed : 260mm/s Speed Under Pressure High Speed : 80 mm/s (140t)～57 mm/s (200t) Low Speed : 32 mm/s (350t)～22 mm/s (500t) Automatic : 22 mm/s Raising Speed : Main Press only : 260 mm/s Up thrust press : 170 mm/s Number of Presses : Main Press : 1 X 300 ton Side Press : 2 X 100 ton Balancer Press : Capacity : 120 ton Pressure : 212 ton Stroke : 1000 mm Cylinders : 2 X 60 ton Cushion Press : 30 - 150 ton Pressure : 41.4-207 kg/cm2 Stroke : 300 mm Quantity : 2 X 75 ton Up Thrust Press Capacity : 15 ton Pressure : 105 kg/cm2 Raising Speed : 170 mm/s Stroke : 300 mm Quantity : 1 Moving Bolster : Pressure : 45kg/ cm2 Bolster Size : 3,500 X 1,800 mm Bolster Traverse Speed : 60 mm/s Max Load when moving : 55 ton Bolster Stroke : 2,100 mm Bolster Movement : Front Movement Cylinders : 1
35	ID MA31167 Make Kawasaki Model YOM 1969 Condition Good Condition Photo See Photo Capacity 1000 tons Die Height 2000 mm Slide 4500 x 2000 mm Bolster 4500 x 2000 mm Raising Speed 350 mm/sec Lowering Speed 350 mm/sec Working Speed 75-30 mm/sec Die Cushion 350 ton Cushion Stroke 650 mm
36	ID MA31053 Make Kawasaki Model YOM Condition Good working condition Photo See Photo Machine Type : Hydraulic Press Make : Kawasaki Capacity : 1000 ton Table : 2700 x 1500 mm Ram : 2520 x 1500 mm Stroke : 900 mm Daylight : 1400 mm Shut Height : 500 mm Speed under pressure : 38 mm/sec Raising speed : 280 mm/sec Die Cushion : 60 - 300 ton Cushion Stroke : 400 mm Cushion Pad Type : 1 pad, 2 cylinders
37	ID MA31052 Make Kotaki Model YOM Condition Good Condition Photo See Photo The press has a 1500 x 1350 bed and a die cushion, as well as a side opening of 580 Width. Stroke 900 mm, Die Height 1200 mm
38	ID MA30985 Make Dominion Model YOM Condition Excellent Photo See Photo Tonnage .1500 Ton Bed Size .50”L/R x 50”F/B Ram Size .50”L/R x 50”F/B Stroke .30” Daylight 36” Main Cylinder Diameter .36” Side Cylinder Diameter (2) .10” Strokes Per Minute .SPM Main Motor .40 HP Electrics 550V/3PH/60HZ Made In .Canada Approximate Weight .LBS Overall Dimension .”L x ”W x ”H Equipped With: Four Post Hydraulic Punch Press, Push Buttons, Floor Standing
39	ID MA30984 Make CMB Model YOM 1991 retrofitted Condition Dismantled,Excellent condition, Photo See Photo Slide force Max (kN) 16,000 Retraction force OSTEO (gross). 7,200 (kN) Cushion force (kN) maximum 10,000 Dimension: Slide stroke (mm) 600 Cushion stroke (mm) 475 Distance bolster - slide in TDC (mm) 1,500 Bolster above floor with foundation (mm) 800 Bolster/slide width (mm) 2,200 Bolster/slide depth (mm) 1,500 Cushion width (mm) 1,950 Cushion depth (mm) 850 Daylight between approx uprights left/right. (mm) 2.210 Daylight between uprights, front/back approx. (mm) 1,000 Table 1500 x 2000 mm Total height above floor approx. (mm) 6,600 Electrical power: Main motor capacity approx. (kW) 110 Velocities: Almost speed downward Max (mm/s) 300 Working speed maximum OSTEO. (mm/s) 24 Working speed at nominal force approx. (mm/s) 6 Almost speed upward Max (mm/s) 250 Control SNG Numerics D4
40	ID MA30983 Make Digep Model DHSS1600 YOM Condition Good Condition Photo See Photo Presskraft 1600 t Pressing power Force de compression Hub 700 mm Stroke Coup Daylight 1400 mm Table size (left to right) 1810 mm Table size (front to back)2260 mm Table displacement no / non Ram (left to right) 1820 mm Ram (front to back) 1840 mm Approach speed 200 mm / sec Pressure speed at F max. 8 mm / sec Lower ejector 3 Lower ejector (speed) 29 mm / sec Lower ejector (stroke) 350 mm Upper ejector no / non Driving power 150 kW Dimensions mm (Wx Dx H) 5150 x 2950 x 10000 mm (B x T x H) Dimensions mm (L x Px H) Height of machine above floor 8330 mm Working pressure 275 bar Oil quantity 2700 l
41	ID MA30979 Make Schuler Smg Model TH1200-2.5x1.6 YOM 2004 Condition Excellent Photo See Photo Punching press -hydraulical- (pre-owned) Controls: PLC PRESS DESIGN frame design frame openings in uprights yes moving bolster yes PRESS FORCES total force (nominal) 1200 to PRESS TABLE table length 3200 mm Table width 2000 mm table plate length 2500 mm table plate width 1600 mm RAM Ram length 3200 mm Ram width 2000 mm ram plate length 2500 mm ram plate width 1600 mm stroke 600 mm RAM (HYDR. PRESS) number of main-cylinders 2 approximation velocity max. 600 mm/s working velocity min. 24 mm/s working velocity max. 47 mm/s return velocity max. 600 mm/s RAM EJECTORS ejectors in ram yes stroke 150 mm force 12 to FEEDERS feeder: type roll feeder ELECTRICAL SPECIFICATIONS total power consumption 550 kW mains voltage 400 V mains frequency 50 Hz DIMENSIONS / WEIGHTS total weight approx. 201000 kg ATTACHMENTS FOR PRESSES cutting impact damping system yes autom. tool clamping device yes hydraulic overload protection yes DECOILER design single coil sheet width max 1050 mm sheet width (min) 150 mm max. weight of coil 22 to max. diameter of coil 2000 mm min. internal diameter of coil 570 mm LEVELER UNIT sheet width max 1050 mm sheet width (min) 150 mm sheet thickness max 8 mm sheet thickness (min) 2.5 mm number of leveler rolls 8 diameter of leveler rolls 96 mm distance between leveler rolls 104 mm diameter of feed rolls 160 mm feed velocity min. 2 m/min feed velocity max. 43.5 m/min Hydraulic punching press for thick metal sheet up to 8mm consisting of: decoiler, straightener, feeder, shear and a 1200 ton p ress. Its table plates ( 2 x ) can be interchanged via a tool change cart. This press is fitted with 4 blanking stroke dampers. - Schuler TH 1200-2.5 x 1.6 1,200 ton hydraulic blanking press - Laweco coil loader - HSK-280-1050 de-coiler - SHF 8-96/160-1050 sheet metal straightener - ADCH-1050-8 transverse cutting unit - Outfeed conveyor system - Storatec tool changer - Eco fire protection system for control cabinets
42	ID MA30961 Make Model YOM Condition Good Condition Photo See Photo Machine Type -Hydraulic Press Make - Kongo Capacity - 400 ton Table - 2500 x 1500 mm Ram - 2500 x 1400 mm Stroke - 1500 mm Daylight - 1800 mm Shut Height - 500 mm Lowering Speed - 120 mm/sec Raising speed - 105 mm/sec Pressing Speed - 15 mm/sec Die Cushion - 130 ton Stroke - 300 mm
43	ID MA30960 Make Kotaki Model YOM Condition Good Condition Photo See Photo 500 ton hydraulic press made by Kotaki, The press has a 1500 x 1350 bed and a die cushion, as well as a side opening of 580 width. Stroke 900 mm, Die Height 1200 mm
44	ID MA30895 Make Kotaki Model YOM Condition Good Condition Photo See Photo The press has a 1500 x 1350 bed and a die cushion, as well as a side opening of 580 width. Stroke 900 mm, Die Height 1200 mm
45	ID MA30893 Make Kongo Model YOM Condition Good Condition Photo See Photo Capacity - 400 ton Piston Dia 507 mm Rod Dia 470 mm Stroke 1500 mm Daylight 1800 mm Slide 2500 x 1400 mm Bolster 2500 x 1500 mm Die Cushion Capacity 130 ton Cylinder 4 Rod Dia 150 mm Stroke 300 mm Raising Speed 38 mm/sec Cushion Pad 1700 x 800 mm Blanking 35 ton Blanking Cylinders 2 Rod Dia 180 mm Moving Bolster Load 15 ton Travel 1550 mm Cylinders 2 Piston Dia 80 mm Rod Dia 35.5 mm Forward Speed 48 mm/sec Reverse Speed 60 mm/sec Lift Cylinders 4 Piston Dia 80 mm Rod Dia 45 mm Lowering Speed 120 mm/sec Pressuring Speed 15 mm/sec Raising Speed 105 mm/sec Inching Down 0.2 - 2.5 mm/sec Inching Up 1.0 - 6.0 mm/sec
46	ID MA30447 Make Romanian Model YOM 1977 Condition Good Condition Photo See Photo Capacity: 1600 ton, retractable table table size: 4400 x 4100 mm dia. of the ram: 3100 mm travel of the mobile crossrail: 2200 mm maximum diameter punch: 3000 mm with 2 pcs extractor
47	ID MA30401 Make Stanko-Russia Model YOM Overhauled 2008 Condition Good Condition Photo See Photo Press max effort 4000 t - internal ram max effort 3000 t, - external ram max effort 1000 t, Max cold punching effort 2000 t, Movable table size 5500x6000 mm, Central ejector effort 900 t, Side ejector effort 100 t, Distance between columns: - on loading side 5900 mm, - on control side 4100 mm, Max distance between table and ram 3750 mm, Internal ram stroke per one stroke of the multiplier 400 mm External ram stroke per one stroke of the multiplier 530 mm Rams up/downstroke speed, max 20 cm/sec, Pressing speed, max 10 cm/sec, Table travel speed 20 cm/sec, Overall dimensions WxL 25250x15500 mm, Height over/under floor 13370/7500 mm, Weight 1323.7 t 1. The Press has 1 main cylinder, 1 cylinder ejector (lower) 2 presser cylinders, 4 cylinders lift the body and including a dozen smaller auxiliary cylinders (lock multiplier etc.). 2. The Pressure unit is max. 200 bar. There are 4 units - 2 original USSR and 2 mentioned a few years ago, my f-PRATISOLLI (Italy), also pressure max. 200 bar. 3. The pumps are equipped with two engines and two 75kW motors 110kW for a total drive power of 370KW. During normal operation work max. 2 pumps, the rest are the reserve. 4. The position control is equipped with a manual and foot control spool valves, gauges pressure reading in various places of power, lights to indicate activation of individual pumps and circuits. Control of the press performed by an experienced employee with midfielders controlling the movement of work from different locations Control of the press performed by an experienced employee with midfielders controlling the movement of work from different locations. ANSWERS TO CERTAIN QUESTIONS FROM ANNEX FOR THE PRESS 4000 TON: Ad 1. The cylinder is cast from steel, the lid screwed. Ad 2. It is a cast shaped, ribbed, max ok.3400mm. Ad 3. The rear flange (probably) and the bolt, Ad 4. ??Approximately 1600mm Ad 5. The thickness is different in different places, approx. 420 to 470mm. Ad 6. Lack of drawing documentation. Ad 7. cast iron rings, packing cords, lead bronze and cast iron. Ad 8. Currently, the lack of opportunities to enter the press to take pictures. Ad 9. Please clarify which parts of the installation point. The installation is very complex. A large part of running channels under the surface of the hall. Ad 10. Ok. 90mm Ad 11. The press has a blocking position of the motherboard. Ad 12. Table 5500 x 5500mm, sliding hydraulic loading and unloading of material to be processed. Ad 13. Column diameter approx. 600mm, driving with a cast-iron liners. Ad 14. There are many lubrication points. Ad 15. hydraulics components often made from scratch by the press manufacturer and suppliers in the USSR. Ad 16. Thus, the pressure measurement at different points of the installation. Ad 17. Control of the press lever, mechanical, main distributors controlled cams, information from the pumping station transmitted via the traffic light. Ad 18. Ok. 20m3 and approx. 25m3 installation Ad 19. Power supply from the substation, pump switched on individually by the service pump at the pumping station control cabinet. Ad 20. 400V - 50Hz Ad 21. Control systems standard, without a PLC. Ad 22. Equipment produced in the 50s, held on a regular basis in performance, components changed as needed, electrical measurements of protection against electric shock - to date. Ad 23. Degree of protection IP54 Ad 24. Electrical cabinets without forced cooling, the ventilation fans to a whole room pumping station. Ad 25, 26 and 27. extensive documentation, drawings in a different state, part of the original Russian part of the user's own additions. It is difficult to determine the full completion. Ad 28. It is overall drawing of the hydraulic system with descriptions of Russian + some translated j. Polish. Ad 29. There is no documentation of building the foundations of the press. Ad 30. Descriptions are placed has various drawings. No separate DTR simple understanding, Ad 31. So, the figure pictorial whole press is given - the total weight of the press - 1323.7 Ton.
48	ID MA30275 Make Model DG2432A YOM 1977 Condition Good Condition Photo See Photo Capacity - 160 tones. Slider's travel - 630 mm Distance between slider and table - 1000 mm Table - 710 x 800 mm Weight - 5170 kg
49	ID MA30270 Make Kotaki Model YOM Condition Good Condition Photo See Photo Capacity: 750 ton Stroke: 900 mm Daylight: 900 mm Bolster: 3500 x 1500 mm Slide: 2000 x 1000 mm
50	ID MI6696 Make AMC,Denmark Model YOM Condition Good Condition Photo See Photo Punchholder force: Max. 300 Mp (+- 2 Mp) adjustable down, Stroke of punchholder: 300 mm, max hydraulic pressure 265 bar, Daylight: 600 mm, Punch holder and bed dimensions: 770 x 870 mm, Approach speed punch holder: 300 mm/sec, Pressing speed punch holder: 33-12 mm/sec, Return speed punch holder: 215 mm/sec, Force of pammel: 5-25 Mp, adjustable , max hydraulic pressure 221 bar, Return force pammel: 5-20 Mp, adjustable , max hydraulic pressure 318 bar, Stroke of pammel: 80 mm, Dimensions : 80 mm, Speed of pammel downwards: 100 mm/sec, Seed of pammel upwards: 200 mm/sec, Ejector force bottom ejector: 5-20 Mp, adjustable , max hydraulic pressure 163 bar, Stroke of bottom ejector: 150 mm, Speed of bottom ejector upwards: 105 mm/sec, Speed of bottom ejector downwards: 75 mm/sec, Ejector force top ejector: 5-20 Mp, adjustable , max hydraulic pressure 254 bar, Stroke of top ejector: 50 mm, Speed of top ejector downwards: 220 mm/sec, Speed of top ejector upwards: 400 mm/sec, Centre line for the 4 ejector pins: 200 mm, Motor power totally: 45 kw, Voltage: 3 x 415 V, 50 cycles, Control voltage: 110/24 V DC on solenia valves, weight of press: 15 tonnes, Hydraulic power pack: on side of press, Necessary amount of oil: 1350 liters, approx Colour: green ,14 E 51
51	ID MI6695 Make AMC,Denmark Model YOM Condition Good Condition Photo See Photo Capacity: 330 ton
52	ID MA30203 Make Gabande Model YOM Condition Good Condition Photo See Photo Capacity: 500 ton, Table: 2500 x 2000 mm, Recorrido: 1020 mm
53	ID MI6670 Make Electropneumatic Model YOM Condition Good Condition Photo See Photo Capacity : 500 ton, Maximum withdrawal capacity : 50 ton, Main Ram :- Hydraulic cylinder bore diameter : 350 mm, Hydraulic cylinder ram diameter : 316.5 mm, Hydraulic cylinder stroke : 500 mm, Open daylight (bed to ram) : 900 mm, Bad area / slide area : LR 3100 x FB 800 mm, Table height from ground : 900 mm, Main ram rapid approach speed : 300 mm/sec, Main ram return speed : 200 mm/sec, Overall dimensions Height x Depth x Width : 6200 x 1000 x 4600 mm.
54	ID MA29688 Make Kongo Model YOM Condition Good Condition Photo See Photo  |  See Video Capacity: 500 tons, Stroke: 1000 mm, Daylight: 1800 mm, Table: 2500 x 1500 mm, Max descent speed: 270 mm/sec, Fastest stopping time: 250 ms, Die cushion: 150 tons, Cushion stroke: 300 mm, Main motor: 55 Kw,6p,200V
55	ID MA29686 Make Amino Model YOM Condition Good Condition Photo See Photo Capacity: 1000 ton, Daylight: 900 m, Stroke: 250 mm, Shut height: 650 mm, Bolster: 1500 x 1000 mm, Slide: 1500 x 1000 mm, Lowering speed: 500 mm/sec Raising speed: 450 mm/sec
56	ID MA29354 Make John Shaw Model YOM 1950 Condition Good Condition Photo See Photo Capacity: 1000 ton Down speed: - Light load: 5461 mm/min, -Half load: 330 mm/min, -Full load: 229 mm/min, Up speed: 4826 mm/min, Draw plate speed: 9144 mm/min, Stroke: 1626 mm, Max. working pressure per ton: 1 ton per sq.ins, Daylight: 2134 mm, Bed mesures: 2591 x 2540, Draw plate cylinder pressure: 0.5 ton per sq. ins in feed,1 ton per sq ins.out