VKengg.co.in

Category : Forging Equipment

Sub-Category : Press Trimming

Total Machines Found : 537

Select	| Machine Details
1	ID MI7971 Make Yangli Model JC21 YOM Condition Good Condition Photo See Photo C frame press, Capacity: 160 ton 2 Units
2	ID MI7970 Make Baba Model YOM Condition Good Condition Photo See Photo H frame Capacity: 150 ton, 2 units available
3	ID MA35269 Make WMW Erfurt,Germany Model YOM Condition Good Condition Photo See Photo Capacity, ton 500 Strokes per minute 12 Ram stroke, mm 400 Ram adjustment, mm 220 Max. shut height between bolster plate and slide, mm 675 Table area, mm 1000 x 1400 Table opening, mm 710 x 710 Main motor power, kW 41 Cushion capacity, ton 160 Cushion stroke, mm 160 Press weight, kg 43000
4	ID MA35268 Make TMP Voronezh Russia Model K2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
5	ID MA35232 Make TMP Voronezh Russia Model KB2536 YOM 1989 Condition Good Condition Photo See Photo Capacity: 400 tons Slide stroke: 250 mm Number of strokes: 25/1 min Distance between bolster plate and slide: 510 mm Shut height: 670 mm Regulation of slide: 160 mm Slide surface: 800×800 mm Table size: 1000×1000 mm Main motor: 40 kW Dimmension: -lenght: 3470 mm -width: 3140 mm -height: 5940 mm Press weight: 32 tons
6	ID MA35217 Make Smeral,Czech Model LDO315 YOM 1982 Condition Good Condition Photo See Photo Capacity:315 tons, ram stroke 200 mm, max. distance between table & ram 900 mm, ram adjustment 20 mm, 44 continuous strokes/min,20 strokes/min., distance from table to slides 1400 mm, table size 1380x950 mm, ram size 1250x900 mm, opening in table 520x420 mm, height of press from floor 4800 mm, main motor power 30 kW, press weight 27 tons, working pressure of clutch 4,5 atmospheres, 0,45 MPA, consumption of air pressure 70 liters per stroke, Dimensions 2300x2350x4900 mm. These press doesn’t work since 2008 when have been taken from LZK4000 line and exchanged for the LDO500. Before this time press working well. The press has no motor and requires some assembly work: New motor Assemble the brake that is disassembled (there is a set of new friction plates) Replace the control panel housing which is bent, or replace the entire panel. (the set includes a spare panel visible in the photo).
7	ID MA35178 Make TMP VORONEZH Model K04.150.242 YOM 1982 Condition Good Condition Photo See Photo Nominal pressing force - 1600 t. Course of slide - 400 mm Slider strokes per minute - 16 Maximal daylight (closed height) between table and slider - 870 mm Adjustment of slider - 220 mm Movable table, size - 1600 x 1600 mm. Weight - 139,7 t
8	ID MI7918 Make Basant Model YOM Condition Good Condition Photo See Photo H type Mechanical power press, capacity 250 tons, bedsize 1000mm *1000mm, daylight 650mm
9	ID MI7917 Make Colombo Model YOM Condition Good Condition Photo See Photo Capacity : 200Ton. Table Size : 1050mm x 750mm
10	ID MI7907 Make Mankoo India Pvt Ltd Model YOM 2013/2014 Condition Good Condition Photo See Photo  |  See Video Capacity: 250 ton BED SIZES 1000MM X 1000MM HEIGHT 550MM STOCK LENTH 200MM GEAR WELL 1500MM FLY WELL 1800MM
11	ID MA35134 Make TMP Voronezh Russia Model K9538 YOM 1973 Condition Good Condition Photo See Photo Nominal effort: 630 t Course stroke: 400 mm Number of strokes in a minute:25 Bolster plate to ram adjustable stroke:180 mm Max. distance plate to ram(in lower position of slider):750 mm Table size:1250 x 1250 mm Main motor power:56 KW Press overall dimension(LxWxH):3650 x 3680 x 6370 mm Press weight:57500 kg
12	ID MA35132 Make WMW Henry Model PelsDC630/1000 YOM Condition Good Condition Photo See Photo Pressing force capacity: 630 Mp (630t) Ejector power of cushion: 80 Mp Table size: 1000 x 1520 mm Ram/Slide size: 800 x 1180 mm Distance between columns: 1030 mm Stroke of ram: 400 mm Ram/Slide adjustment: 170 mm No. of strokes: 12 per min size of window on side columne 670 x 885mm Shut height: 850 mm Main motor: 65kW Total power requirement: 68 kW Overall dimensions: -floor space: 2340x2280 mm -height above floor level: 6850 mm Weight of machine: 50 t
13	ID MA35130 Make TMP Voronezh Russia Model K2538 YOM 1975 Condition Good Condition Photo See Photo Capacity: 630 ton, Slide stroke : 320 mm, Number of slide strokes : 20 min -1 Distance between bed and slide when in down position and adjustment up: 800 mm, Adjustment stroke: 180 mm, Bolster plate thickness: 180 mm, Slide dimensions: Left to right;:1000 mm, Front to back: 1000 mm, Bed dimensions: Left to right: 1250 mm, Front to back: 1250 mm, Dimensions of openings in uprights: 800 mm Bed height above floor level: 500 mm, Overall press dimensions: left to right: 3600 mm, front to back: 3470 mm, Press height above floor level: 6190 mm, Main motor power: 61 kW, Weight: 49,6 kg
14	ID MI7893 Make Mankoo India Pvt Ltd Model YOM Condition Good Condition Photo See Photo 200 ton H frame under power
15	ID MI7881 Make Pressmaster Model YOM Condition Good working condition Photo See Photo  |  See Video Capacity: 250 ton, Motor 30 hp Bed size :- 1150 x 1150 mm Suit height :- 650 mm hydraulic overload stroke length :- 300 mm adjustment 150 mm Stroke per minutes 40 Die cushion available
16	ID MI7880 Make Pressmaster Model YOM Condition Good Condition Photo See Photo  |  See Video Capacity: 315 ton, Motor 50 hp Bed size :- 1250 x 1250 mm Suit height :- 650 mm hydraulic overload stroke length :- 300 mm adjustment 150 mm Stroke per minutes 40 Die cushion available
17	ID MA34999 Make ZTS Kosice Sloakia Model LE400C YOM Condition Good Condition Photo See Photo Capacity: 400 ton
18	ID MA34886 Make Zdas Model LU400/1000 YOM Condition Good Condition Photo See Photo Max.press force :400 t Press ram stroke :200(D),250(E),315(F)mm Clamping height :748(D),723(E), 690(F) mm Number of usable strokes:12 mm -1 Pass under guide :1000 mm Thickness of the fastening plate 220 mm Recess in the table(w x d):750x750 mm Press ram adjustability 150 mm Force of the upper push back :16 t Force of the lower push back :40 t Press air connection :6 at Air consumption for 1 stroke:25 dm3 Main electric motor: 37 kW Motor for press ram adjustment: 1,5 kW Max. press height above the floor: 5490 mm Press weight :29 300 kg Press distmantled
19	ID MA34874 Make Pels Model DE1250 YOM 1964 Condition Good Condition Photo See Photo Max. ram force: 1250 tons Slide stroke: 500 mm Slide adjustment: 215 mm Max. shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 mm Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW Min. number of no-load strokes: 8 Cushion force in the bolster: 2000 kN Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 tons
20	ID MI7792 Make Minister USA Model YOM Condition Good Condition Photo See Photo C frame Capacity: 150 ton Bed size 1250x839 Shut ht : 400 mm Stroke : 150 mm Adjustment Of slide : 100 mm Weight of machine :17 ton
21	ID MA34699 Make Shinohara Model AG100 YOM Condition Good Condition Photo See Photo Capacity：100TON Stroke：150TON S.P.M：35 Shut height：280mm Ram adjustment：80mm Ram dimension：428x460mm Bolster dimension：740x740mm Bolster thickness：75mm Main motor：5.5kWx4P
22	ID MA34697 Make AIDA,Japan Model PC-10(2) YOM 1974 Condition Good Condition Photo See Photo Capacity: 100 TON Stroke：170mm S.P.M：65 Die height：350 mm Slide：75 mm (manual） Bed dimension：560 W x 1065 L Ram dimension：450W x 600 L
23	ID MA34648 Make Russian Model KD1424 YOM Condition Good Condition Photo See Photo Rated force, kN 250 Slider stroke, mm 65 Main motor power kW 2.7 Table size width / length mm 340/500 Machine dimensions Length Width Height (mm) 1200_1170_2145 Weight kg 2800 11 presses available
24	ID MA34627 Make TMP Voronezh Russia Model KA9536 YOM Condition Good Condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons
25	ID MA34617 Make Fujicar Model YOM Condition Good Condition Photo See Photo  |  See Video Capacity:1200 tons Stroke: 500 mm Die Height: 900 mm SPM: 12 Table: 2000 x 1500 mm Die Cushion:200 ton
26	ID MA34606 Make TMP Voronezh Russia Model KB2538.01 YOM 1985 Condition Good Condition Photo See Photo Capacity : 630 tons, Ram stroke : 320 mm, Stroke per minute : 20 SPM, Shut height : 620 mm, Bolster plate to ram adjustment stroke : 180 mm, Bed dimensions : 1250 x 1250 mm, Ram dimensions : 1000 x 1000 mm, Bolster plate thickness : 180 mm, Main drive motor power : 61 kW, Overall dimensions : 3600 x 3470 x 6190 mm, Mass : 49.6 tons.
27	ID MA34513 Make TMP Voronezh Russia Model KA9536 YOM Condition Good Condition Photo See Photo Capacity: 400 ton Ram stroke: 400 mm Max. distance between bolster and ram: 630 mm Stroke number per minute: 25 per min Table size: 1000×1000 mm Dimensions: 3410 x 3140x5940 mm
28	ID MI7696 Make Basant Model YOM Condition Good Condition Photo See Photo Capacity: 200 ton
29	ID MI7692 Make Mankoo Model YOM Condition Good Condition Photo See Photo Capacity: 100 ton 2 nos
30	ID MI7689 Make Amrit Model YOM Condition Good Condition Photo See Photo Capacity: 300 ton
31	ID MI7688 Make Amrit Model YOM Condition Good Condition Photo See Photo Capacity: 300 ton
32	ID MI7687 Make WMW Erfurt,Germany Model YOM Condition Good Condition Photo See Photo Window punching machine Capacity: 200 ton Quantity:4 nos
33	ID MI7684 Make Model YOM Condition Good Condition Photo See Photo Window punching machine-3 Capacity: 200 ton
34	ID MI7681 Make WMW Erfurt,Germany Model YOM Condition Good Condition Photo See Photo Capacity: 200 ton Quantity: 2
35	ID MI7680 Make Czechoslovakia Model YOM Condition Good Condition Photo See Photo Capacity: 160 ton
36	ID MI7671 Make Amrit Model YOM Condition Good Condition Photo See Photo Capacity: 250 Ton
37	ID MI7669 Make Amrit Model YOM Condition Good Condition Photo See Photo Capacity: 400 ton
38	ID MI7668 Make Amrit Model YOM Condition Good Condition Photo See Photo Capacity: 200 ton
39	ID MA34421 Make TMP Voronezh Russia Model K9540 YOM 1974 Condition Good Condition Photo See Photo Capacity – 1000 tons. Slide stroke – 500 mm. Number of continuous strokes per 1 min – 16. Unattainable-course – 12 mm. Max. distance between bolster plate and slide – 900 mm. Adjustment – 200 mm. Table (bolster plate) dimensions: -Left to right – 1250 mm; -Front to back – 1250 mm. Aperture in a table – 800x800 mm. Slide dimensions: -Left to right – 1250 mm; -Front to back – 1000 mm Main motor power – 77 kW Dimensions: -Left to right – 4540 mm; -Front to back – 3800 mm; -Height above floor level – 6990 mm. Machine weight – 79500 kg.
40	ID MI7655 Make Russian Model K2132 YOM Condition Good Condition Photo See Photo Capacity: 160 ton, Table: 670 x 1000 mm, Stroke: 180 mm, Shut height: 480 mm Weight: 12.3 ton
41	ID MA34292 Make TMP Voronezh Russia Model KA2536 YOM Condition Good Condition Photo See Photo Maximum force : 400 ton Slider stroke length : 250 mm Number of courses of a slider per minute : 25 Maximum distance between table and slider (in lower position of slider): 670 mm Table overall dimensions: from front to rear: 1000 mm from left to right: 1000 mm Main electric motor power: 40 kW Press overall dimensions: length: 3410 mm width: 3140 mm height: 5930 mm Press weight: 30 ton
42	ID MA34291 Make TMP Voronezh Russia Model KA9536 YOM Condition Good Condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons
43	ID MA34288 Make TMP Voronezh Russia Model KB9534 YOM Condition Good Condition Photo See Photo Capacity : 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
44	ID MA34223 Make TMP Voronezh Russia Model K5535 YOM 1972 Condition Good Condition Photo See Photo Pressure - 315 tones Inner Slider's travel - 670mm Outer Slider's travel - 420mm Strokes per minute - 10 Distance between Inner/outer Slider and table - 950/850mm
45	ID MI7536 Make Kaushiko Model YOM Condition Good Condition Photo See Photo Bolster L : 2000mm B : 1250mm Slide Size L: 2000mm B: 1250mm Max. shut ht : 600mm Adjustment : 180mm Mini. shut size ht : 420mm H type double suspension t slot cd : 300mm
46	ID MI7534 Make Press Master Model 2VXL YOM Condition Good Condition Photo See Photo Bolster L = 2700mm B = 1000mm Slide size : Area = 2100 x 800mm Adjustability : 120mm fixed stroke : 250mm bolster area : 2700mm x 1000mm power of drive : 30hp motor rpm : 1440
47	ID MI7528 Make WMW Model YOM Condition Good Condition Photo See Photo CAPACITY 250 TON DIMENSION TABLE (X - Y) 1.100 x 850 MM TOP DEAD CENTER HEIGHT 500 MM TABLE HEIGHT ADJUSTMENT 125 MM STROKE 20-200 MM WEIGHT OF THE MACHINE CA. 16000KG DIMENSION OF THE MACHINE CA. 1200MM X 1800MM X 3200MM
48	ID MI7527 Make WMW Model YOM Condition Good Condition Photo See Photo NOMINAL FORCE 250 TON STROKE ADJUSTMENT 40 - 160 mm RAM ADJUSTMENT 110MM RAM DIMENSION 900MM X 670MM POWER 23.5KW DIMENSION OF THE MACHINE 1,5 x 2,9 x 3,6 m WEIGHT APPROX. 16000KG
49	ID MI7526 Make WMW Model YOM Condition Good Condition Photo See Photo NOMINAL FORCE 250 TON STROKE ADJUSTMENT 165 SLIDE ADJUSTMENT 70 HOLE IN RAM 63 HOLE IN BED 229 Length & wide of Bed 1067X778 WEIGHT APPROX. 16000KG
50	ID MI7525 Make WMW Model YOM Condition Good Condition Photo See Photo NOMINAL FORCE 250 TON STROKE ADJUSTMENT 165 SLIDE ADJUSTMENT 70 HOLE IN RAM 63 HOLE IN BED 229 Length & wide of Bed 1067X778 WEIGHT APPROX. 16000KG
51	ID MI7523 Make Wilkins & Mitchell Model G54S4-10 YOM Condition Good Condition Photo See Photo 350TONS
52	ID MI7452 Make Ravne,Germany Model YOM Condition Good Condition Photo See Photo Capacity: 800 ton
53	ID MA33905 Make Verson Model ES1-1000-54-54T YOM Condition Good Condition Photo See Photo Capacity: 1000 ton, Bed: 54"x 54" Stroke of slide: 28" Adjustment of slide (power): 8" Stroke per min: 13.3,17&21 Lift out capacity: 100 tons, Lift out stroke (capacity): 6to 9 " Knockout capacity @100 PSI 800 ton (approx)
54	ID MA33901 Make Zdas Model LU630 YOM Condition Good Condition Photo See Photo Capacity: 630 ton Table: 1130 x 1400 mm Slide stroke: 315 mm Stroke amount 16 per minute Weight: 45 ton
55	ID MA33893 Make Russian Model KB2132 YOM Condition Good Condition Photo See Photo 160 tons , Slide stroke 25- 160 mm , № of strokes per minute 71 , Shut height on Bolster, "SDAU" 370 mm , Slide adjustment 120 mm , Bed & Bolster area left-right 1000 mm, front-back 670 mm, Bolster thickness 110 mm, Slide Area left-right 460 mmm front-back 580 mm, Motor 16 HP, Overall dimensions 2340 x 2100 x 3700 mm , Weight 13 tons.
56	ID MA33890 Make Erfurt Model PKZE1250 YOM Condition Good Condition Photo See Photo Strokes per minute 8 Ram stroke, mm 500 Ram adjustment, mm 215 Shut height, mm 860 Table size, mm 1600 x 1850 Ram size, mm 1300 x 1400 Main motor power, kW 90 Cushion stroke, mm 160 Cushion adjustment, mm 200 Press weight, kg 130000
57	ID MA33887 Make TMP Voronezh Russia Model K2540 YOM Condition Good Condition Photo See Photo Effort 1000 tons Slider stroke 400mm Distance between table and slide 950 mm Table size 1500 * 1500 mm Motor power 100 kW Weight 84 tons Dimensions 3800 * 4200 * 7000
58	ID MA33861 Make TMP Voronezh Russia Model K9540 YOM 1970 Condition Good Condition Photo See Photo Capacity:1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t.
59	ID MA33785 Make TMP Voronezh Russia Model KA9536 YOM 1988 Condition Good Condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons
60	ID MI7309 Make Smeral,Czech Model LE250C YOM Condition Good Condition Photo See Photo Capacity: 250 T Bed Size:1100*730 RAM Size:800*500 RAM Stroke:30-140 mm Slide Adjustment: 100 mm SPM : 45 OPE At TDC:500 MM Clutch:Pneumatic Clutch
61	ID MA33560 Make TMP VORONEZH Model KV2536 YOM 1986/89 Condition Photo See Photo Capacity: 400 ton, Stroke: 250 mm, Table: 1000 x 1000 mm, Shut height: 510 mm, With cushion, Weight: 31,4 ton Quantity- 2 nos
62	ID MA33522 Make Smeral,Czech Model LDO800A YOM 1991 Condition Good Condition Photo See Photo Capacity- 800 tons, Stroke- 320 mm Motorized wedge adjusment- 180 mm, Weight of press- 77T
63	ID MA33521 Make Smeral,Czech Model LDO315 YOM Condition Good Condition Photo See Photo Rated deformation force: 315 ton Number of ram strokes (1/min): 44 Ram stroke: 200 mm Ram adjustment: 20mm Working area of bed: 1250 x 900 mm Working area of table: 1380 x 950 mm Passage: 1420 mm Shutheight: 700 mm Output of main motor: 30 mm Lenght of the machine: 2350 mm Widht of the machine: 2300 mm Height of the machine: 4900 mm Weight of the machine: 27500 mm
64	ID MA33520 Make TMP Voronezh Russia Model 2538 YOM Condition Good Condition Photo See Photo Maximum force: 630 tons Slider stroke length: 320 mm Number of courses of a slider per minute: 20 Max. distance between bolster and ram: 800 mm Adjustment: 180 mm Table size: 1250×1250 mm Slider overall dimensions: 1200×1000 mm Aperture in a table: 800×800 mm Window dimensions in cheeks: 750×400 mm Press overall dimensions: 3659x3680x6370 mm Press weight: 55 ton
65	ID MA33519 Make TMP Voronezh Russia Model KA2536 YOM Condition Good Condition Photo See Photo Maximum force : 400 ton Slider stroke length : 250 mm Number of courses of a slider per minute : 25 Maximum distance between table and slider (in lower position of slider): 670 mm Table overall dimensions: from front to rear: 1000 mm from left to right: 1000 mm Main electric motor power: 40 kW Press overall dimensions: length: 3410 mm width: 3140 mm height: 5930 mm Press weight: 30 ton
66	ID MA33491 Make TMP Voronezh Russia Model K9534 YOM Condition Good Condition Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
67	ID MA33482 Make TMP Voronezh Russia Model KB9534 YOM Condition Good Condition Photo See Photo Capacity : 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
68	ID MA33305 Make Cowlishaw Walker Model S1-600-48-12 YOM Condition Good Condition Photo See Photo Rating 600 ton Stroke 304 mm Speed (S.P.M.) 18 Clutch air pressure (P.S.I.) 75 Cushion laod (100 P.S.I.) 120 Cushion stroke 6 inches Table size 1220 x 1220 mm Slider size 1220 x 1220 mm Shut height 890 mm Adjustment 305 mm Hydraulic ejector is installed. Additional installation of full brand new modern electric system with PLC. Safety system, operator protection system, overload protection, Main motor speed control, counter for ram press position, HMI. System based on the SCHNEIDER (Germany) PLC Warranty for all press systems: 6 months
69	ID MA33263 Make Kurimoto Model S2-400 YOM Condition Good Condition Photo See Photo Capacity : 400 ton Bolster 1200~1100 Stroke 270 Die height 760 SPM 30
70	ID MA33237 Make Hosung Korea Model HSS600 YOM Condition Good Condition Photo See Photo Capacity: 500 ton
71	ID MA33224 Make Kurimoto Model YOM Condition Good Condition Photo See Photo Capacity : 1200 ton Stroke : 300 mm Die Height : 850 mm SPM : 25 Slide Adjust : 300 mm Table : 2000 x 1600 mm Slide : : 1800 x 1600 mm Knockout : 7.5 ton x 50 mm Die Cushion : 1 pad, 1 cylinder Cushion Capacity : 65 ton Cushion Stroke : 150 mm Cushion Pad : 1000 x 1000 mm
72	ID MA33210 Make TMP Voronezh Russia Model KB9534 YOM Condition Good Condition Photo See Photo Capacity : 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
73	ID MA33204 Make Hwail Model YOM 2010 Condition Good Condition Photo See Photo Capacity : 200Ton Stroke Length : 280mm SPM : 20 ~ 40SPM Die Height : 460mm Bolster Area : 1400 x 850mm Slide Area : 1300 x 700mm Slide Adjustment : 120mm Shank Hole : 60mm Main Motor : 22Kw x 4P Adjusting Motor : 1.5Kw x 4P Air Pressure : 5 Bar
74	ID MA33203 Make Hwail Model YOM 1999 Condition Good Condition Photo See Photo Capacity : 200Ton Stroke Length : 250mm SPM : 20 ~ 40SPM Die Height : 550mm Bolster Area : 1500 x 850mm Slide Area : 1100 x 720mm Slide Adjustment : 100mm Shank Hole : 55mm Main Motor : 22Kw x 4P Adjusting Motor : 0.75Kw x 4P Air Pressure : 5 Bar
75	ID MI7217 Make Mankoo Model YOM Condition Good Condition Photo See Photo 150 Ton Trimming Press
76	ID MA33077 Make Russian Model K0134 YOM 1979 Condition Good Condition Photo See Photo Nominal force – 250 Tons Undershoot slider – 15 mm. Slide stroke – 250 mm. The number of continuous strokes – 25-40 min-1. Die height – 600 mm. Adjustment – 15 mm. Main drive motor power – 60 kW. Machine dimensions – 2640 x 2700 x 4810 mm. Mass of press without base and electric equipment – 26500 kg
77	ID MA33061 Make Arrasate Model PR200 YOM Condition Very good condition,Under power Photo See Photo C FRAME PRESS. CAPACITY: 200 T VARIABLE STROKE: 20-180 RAM ADJUSTMENT: 130 mm CONTINUOUS STROKING RATE: 40 std/min STROKING RATE STROKE/STROKE DAYLIGHT: 440 mm TABLE AREA: 1400 x 900 DEPTH OF THROAT: 450 mm RAM AREA: 1000 x 750 HOLE IN RAM MOTOR: 18,4 KW DIMENSIONS: WIDTH: 1550 mm DEPTH: 2750 mm HEIGHT: 3300 mm WEIGHT OF PRESS: 16 T
78	ID MA33051 Make Russian Model KV2132 YOM 1993 Condition Good Condition Photo See Photo Capacity: 160 tons, ram stroke 160 mm, Stroke per minute : 37, bed size 1000 x 670 mm, distance between table and ram in its lower position 480 mm, distance ram to knock out 360 mm, distance ram to bed 120 mm, weight 12.3 tons
79	ID MA33042 Make Woojin Model WS200N YOM Condition Good Condition Photo See Photo Capacity: 200 ton Limit of Capacity : 7 mm Stroke : 200 mm No. of stroke : 20-40 spm Die Height : 480 mm Adjust of slide : 120 mm Diam of sunk hole : 250 mm Area of slide : 1100 x 650 mm Area of bolster : 1450 x 800 mm Main motor : 18.5kw x 4p Adjusting motor : 1.5kw x 4p Air pressure : 5kg/cm2 Capacity of die cushion : 17 ton Stroke of die cushion : 130 mm
80	ID MA33041 Make Hanoul Model YOM Condition Good Condition Photo See Photo Capacity: 200 ton
81	ID MA33040 Make Kukil Model PCA200 YOM Condition Good Condition Photo See Photo Capacity; 200 ton, Stroke: 250 mm, No. of stroke: 50 spm, Die height: 500 mm, Slide adjustment: 150 mm, Bolster area (LR x FB): 1450 x 850 mm, Slide area (LR x FB): 1100 x 750 mm, Bolster thickness: 160 mm, Die of shank: 50 mm, Frame gap : 435 mm, Main motor:18.5 Kw x p Slide adjustment motor: 075 x 47 Kw x p , Air pressure: 5 kg/vm2
82	ID MA33039 Make SIMPAC Model CS200 YOM Condition Good Condition Photo See Photo Capacity: 200 ton, Stroke length: 250 mm, Stroke per min: 20-40 SPM, Die height: 520 mm, Slide adjust: 120 mm, Slide area (LA x FB): 1250 x 750 mm, Bolster area (LA x FB): 1450 x 350 mm, Bolster thickness: 130 mm, Main motor: 220 x 4 KWP Adjust motor: 15 x 4 KWP Die Cushion: Capacity: 50 mm, Stroke: 130 mm, pad area; 760 x 460 mm,
83	ID MA32889 Make TMP Voronezh Russia Model K9538 YOM Condition Good Condition Photo See Photo Nominal effort: 630 tons Course stroke: 400 mm Number of strokes in a minute: 25 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Table size: 1250 x 1250 mm Main motor power: 56 kW Press overall dimensions: -Length: 3650 mm -Width: 3680 mm -Height: 6370 mm Press weight: 57500 kg
84	ID MA32888 Make TMP Voronezh Russia Model KA9536 YOM Condition Good Condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons Quantity: 2 no
85	ID MA32869 Make Model KA2534 YOM Condition Good Condition Photo See Photo 250 tons , ram stroke 200 mm, 32 SPM , shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons. 26 tonns maybe one 40 "OT conteners
86	ID MA32829 Make Erfurt Model PKZ250/800 YOM Condition Good Condition Photo See Photo Capacity – 250 tons Stroke – 315 mm Slide adjustment – 160 mm Distance slide-table – 800 mm Die height 555 Slide 620x950 mm Table 800x1180 mm Power 28 kW Total weight – 25000 kg
87	ID MA32828 Make Erfurt Model PKnZ YOM Condition Good Condition Photo See Photo 250 tons
88	ID MA32799 Make WMW Erfurt,Germany Model PKNT160 YOM 1981 Condition Excellent Photo See Photo Type: Deep Drawing CRANK Press Specification: 1- capacity of PRESS 160 TONS, 2- Force of sliders 22 mm before lowest position: 95, 3- Depth: 200 mm, 4- Regulation: 130 mm, 5- Cushion: 25, 6- Ejector: 4, 7- Shut height: 575 8- Distance between columns: 800 mm, 9- Table size: 800 x 800, 10- Stroke: 425 mm, 11- Slide: 500 x 500 12-Year of manufacturing 1981 13.Weight machine 12650 Kg This machine is under power still and located in factory - so, need dismatling
89	ID MA32751 Make Model KB9534 YOM Condition Good Condition Photo See Photo Capacity : 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
90	ID MA32547 Make TMP VORONEZH Model KB9534 YOM 1984 Condition Good Condition Photo See Photo Capacity : 250 ton, Slide stroke :280 mm, Ram continuous stroke number in minute :32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size :800 x 800 mm, Aperture in table :500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment :140 mm, Bolster size : 850 x 850, Bolster thickness :140 mm, Main motor :27 kW, Dimensions - Length : 3260 mm, Width :2970 mm, Height :5180 mm, Machine weight : 25800 kg.
91	ID MA32533 Make TMP Voronezh Russia Model KA2534 YOM Condition Good Condition Photo See Photo 250 tons , ram stroke 200 mm, 32 SPM , shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons.
92	ID MI7099 Make VSS Model LE400C YOM Condition Good Condition Photo See Photo  |  See Video This is pnumetic clutch cross shaft press Bed Size -- 1220 mm x 915 mm C Frame Press Bed : 48 x 36 40 Stokes/Min Single Strokes min : 15 Stoke of the Ram mm : 30-150 Adjust : 120 Total Weight kg : 22,000 Shut Height no Bolsters min : 13.375 max 20 Shut Height W/bolsters : min : 9.625
93	ID MI7098 Make Basant Model YOM Condition Good Condition Photo See Photo Capacity: 150 ton
94	ID MA32504 Make TMP Voronezh Russia Model KB2536 YOM 1985 Condition Good Condition Photo See Photo Capacity, ton 400 Slider stroke, mm 250 Slider strokes, spm 25 Shut height, mm 670 Distance adjustment between table and slider, mm 160 Slider size, mm 800 x 800 Table size, mm 1000 x 1000 Table gap size, mm 630 x 630 Bolster plate thickness, mm 160 Table height above floor, mm 660 Max. stamp weight fixed on the slider, kg 1000 Cushion stroke, mm 160 Main power drive, kW 40 Voltage, V 340 Machine dimensions, mm 3470 x 3140 x 5940 Machine weight, kg 36500
95	ID MA32502 Make TMP Voronezh Russia Model KB2534 YOM 1986/Conserved from 1994 Condition Good Condition Photo See Photo Nominal force, kN 250 Slide stroke, mm 200 Distance between table and slider, mm 560 The frequency of the continuous strokes of the RAM, min 40 Table dimensions: width, length, mm 800 - 800 Motor power of main motion total power, kW 35 Dimensions, mm 2700_2500_4690 Weight, kg 18600
96	ID MA32439 Make Smeral,Czech Model LKO315 YOM 1965 Condition Good working condition Photo See Photo Pressure - 315ton Table 1250x800mm Stroke - 80mm Stroke per minute 30 Height 710mm Power - 22kW Weight - 18000kg
97	ID MA32236 Make TMP Voronezh Russia Model KA9536 YOM 1991 Condition Good Condition Photo See Photo Capacity: 400 t Slider stroke: 400 mm Min. distance between table and slide: 8 mm Number of strokes min-1: 25 Number of the single cut-in min-1: 18 Maximum distance between table and slider (in lower position of slider): 630 mm Size of adjustment of distance between down-stamp a plate and slider: 160 mm Table overall dimensions: 1000 x 1000 mm Slider overall dimensions: 800 x 800 mm Hole in the table: 630 x 630 mm Main motor power: 43,3 kW Press overall dimensions: 3410/3140/5930 mm Press weight: 32700 kg
98	ID MA32221 Make WMW Erfurt,Germany Model PKZE500 YOM 1978 Condition Good Condition Photo See Photo Capacity: 500 ton Slide effort at the distance of 160 mm to the lower dead point: 250 kN Number of single strokes per minute: 12 Slide stroke: 400 mm Slide adjustment: 220 mm Ejector stroke: 180 mm Thickness of plate with slots for fastening: 175 mm Inner height between plate with slots and pusher (stroke down, adjustment up): 675 mm Clearance between columns: 1000 mm Table area: 1000x1400 mm Table opening: 710x710 mm Pusher area: 800x1120 mm Table cushion: -Max. stroke: 160 mm -Stroke adjustment: 160 mm -Max. retention effort: 800 kN -Max. ejection effort: 125 kN Main motor power: 41 kW; 1320 rpm Power of pusher motor: 3,5 kW; 1420 rpm Number of revs of flywheel shaft: 630 rpm Press weight: 43 tons
99	ID MA32158 Make Russian Model KG2134 YOM 1995 Condition Good Condition Photo See Photo 250 tons, ram stroke 25-200 mm,Ram dimensions of this press: 1120 х 750 mm, no of strokes per min 61 or 25, shut height 560 mm, bed to ram adjustment stroke 140 mm, ram axis to frame distance 400 mm, bed size 1120 x 750 mm, ram size 930 x 730 mm, main drive motor power 27 kw, overall dimensions 2500 x 2700 mm, height above floor level 4300 mm, mass 21.5 tons.
100	ID MA32077 Make TMP Voronezh Russia Model K9536 YOM 1989 Condition Good Condition Photo See Photo Nominal effort: 400 tons Slide stroke: 400 mm Number of strokes: 25/1 min Distance between bolster plate and slide: 510 mm Shut height: 670 mm Regulation of slide: 160 mm Slide surface: 800 x 800 mm Тable size: 1000 x 1000 mm Main motor: 40 kW Dimension: - Length: 3470 mm - Width: 3140 mm - Height: 5940 mm Press weight: 36 tons
101	ID MA32061 Make Suzuki (Kongo) Model YOM Condition Good Condition Photo See Photo Capacity: 350 ton Stroke: 350 mm Die Height: 650 mm SPM: 45 Adjust: 125 mm Bolster: 1150 x 1000 mm Slide: 1000 x 800 mm Die Cushion Capacity: 30 ton Stroke:100 mm
102	ID MA32060 Make TMP Voronezh Russia Model K2542 YOM 1974/1977 Condition Good Condition Photo See Photo Capacity : 1600 tons, Ram stroke : 400 mm, Stroke per minute : 16, Shut height : 870 mm, Bolster plate to ram adjustment stroke : 220 mm, Bed dimensions : 1600 x 1600 mm, Ram dimensions : 1600 x 1600 mm, Bolster plate thickness : 650 mm, Main drive motor power : 110 kW, Cushion capacity : 20 to 350 Tons, Cushion stroke : 250 mm, Overall Dimensions : 4670 x 4670 x 8110 mm, Mass : 141.5 tons.
103	ID MA32041 Make TMP Voronezh Russia Model KB2536 YOM 1960 Condition Good Condition Photo See Photo Made in: Russia Nominal effort: 400 tons Slide stroke: 250 mm Number of strokes: 25/1 min Distance between bolster plate and slide: 510 mm Shut height: 670 mm Regulation of slide: 160 mm Slide surface: 800×800 mm Table size: 1000×1000 mm Main motor: 40 kW Dimmension: -lenght: 3470 mm -width: 3140 mm -height: 5940 mm Press weight: 32 tons
104	ID MA31974 Make Model K2132 YOM Condition Good Condition Photo See Photo Nominal effort: 160 ton Max. slide stroke: 160…25 mm Number of continuous slide strokes:71 1/min Number of single slide strokes: 28 1/min Table dimensions: 1000х670 mm Dimensions of the opening in the table: 480х320 mm Diameter of the opening in the table:420 mm Distance adjustment between table and slide: 120 mm Distance between bed columns in daylight: 480 mm Bolster plate thickness: 110 mm Max. stroke of ejector in the slide: 65 mm Height of the table above floor: 3700 mm Main drive electric motor power: 16 kW Press dimensions (length width height): 2340 х 2100 х 3700 mm Press weight: 12300 kg
105	ID MA31968 Make Zdas Model LU630A YOM 1975 Condition Good Condition Photo See Photo Capacity: 630 ton Table: 1130 x 1400 mm Slide stroke: 315 mm Stroke amount 16 per minute Weight: 45 ton
106	ID MA31934 Make TMP Voronezh Russia Model K2538 YOM 1974 Condition excellent working condition Photo See Photo Nominal capacity: 630 ton, Rated distance of slide above bottom: 16 mm, Slide stroke: 420 mm, Continuous run frequency, min-1 20 Single strokes max. frequency, min-1 15 Shut height: 800 mm, Shut height adjustment: 180 mm, Slide dimensions, mm -left to right 1000 -front to back 1000 Bolster plate dimensions, mm -left to right 1250 -front to back 1250 Mass of the press: 49550 kg
107	ID MA31895 Make TMP Voronezh Russia Model K2538 YOM Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons. Quantity- 2 Machine
108	ID MA31843 Make TMP Voronezh Russia Model K9536 YOM Condition Good Condition Photo See Photo Capacity: 400 t Slider stroke: 360 mm Min. distance between table and slide: 6 mm Number of strokes min-1: 27 Number of the single cut-in min-1: 19 Maximum distance between table and slider (in lower position of slider): 470 mm Size of adjustment of distance between down-stamp a plate and slider: 160 mm Table overall dimensions: - From left to right: 1000 mm - From front to rear: 1000 mm - Height: 160 mm Slider overall dimensions: 800 x 800 mm Hole in the table: 630 x 630 mm Window in rack: 700 x 550 mm Main motor power: 45 kW Max. working strokes of hydro-air-cushion: 100 mm Max. force of pushing out: 12 t Hydro-air-cushion: - Max. working course: 100 mm - Max. force of pushing out: 12 t - Max. force of a clip: 63 t Press overall dimensions: 2900/3100/5580 mm Press weight: 36000 kg
109	ID MA31837 Make TMP Voronezh Russia Model K2538 YOM 1978 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
110	ID MA31792 Make TMP Voronezh Russia Model K2542 YOM Condition Good Condition Photo See Photo Capacity : 1600 tons, Ram stroke : 400 mm, Stroke per minute : 16, Shut height : 870 mm, Bolster plate to ram adjustment stroke : 220 mm, Bed dimensions : 1600 x 1600 mm, Ram dimensions : 1600 x 1600 mm, Bolster plate thickness : 650 mm, Main drive motor power : 110 kW, Cushion capacity : 20 to 350 Tons, Cushion stroke : 250 mm, Overall Dimensions : 4670 x 4670 x 8110 mm, Mass : 141.5 tons.
111	ID MA31757 Make TMP Voronezh Russia Model K2538 YOM Condition working condition ,under power Photo See Photo Nominal capacity: 630 ton, Rated distance of slide above bottom: 16 mm, Slide stroke: 420 mm, Continuous run frequency, min-1 20 Single strokes max. frequency, min-1 15 Shut height: 800 mm, Shut height adjustment: 180 mm, Slide dimensions, mm -left to right 1000 -front to back 1000 Bolster plate dimensions, mm -left to right 1250 -front to back 1250 Mass of the press: 49550 kg
112	ID MA31729 Make TMP Voronezh Russia Model KB9534 YOM 1978 Condition Photo See Photo Capacity : 250 ton, Slide stroke :280 mm, Ram continuous stroke number in minute :32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size :800 x 800 mm, Aperture in table :500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment :140 mm, Bolster size : 850 x 850, Bolster thickness :140 mm, Main motor :27 kW, Dimensions - Length : 3260 mm, Width :2970 mm, Height :5180 mm, Machine weight : 25800 kg.
113	ID MA31697 Make TMP VORONEZH Model K9534 YOM 1965 Condition Good Condition Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
114	ID MA31693 Make TMP Voronezh Russia Model K9536 YOM 1988 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons.
115	ID MA31687 Make TMP VORONEZH Model KG2538 YOM Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons,
116	ID MA31669 Make TMP Voronezh Russia Model K2538 YOM 1980 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
117	ID MA31661 Make TMP Voronezh Russia Model K2538 YOM 1977/1983 Condition Good Condition Photo See Photo Capacity: 630 ton, Slider stroke: 320 mm, Slider strokes:20 spm Shut height: 800 mm Distance adjustment between table and slider: 180 mm, Slider size: 1000 x 1000 mm, Table size: 1250 x 1250 mm, Bolster plate thickness: 180 mm, Main power drive: 50 kW, Voltage: 340V Machine dimensions: 3600 x 3470 x 6190 mm, Machine weight: 55500kg
118	ID MA31624 Make TMP Voronezh Russia Model K9542 YOM Condition Good Condition Photo See Photo Capacity: 1600 ton, Slide stroke: 630 mm, Slide stroke to the extreme bottom position where the press develops its rated capacity: 7 mm, Number of continuous strokes per 1 min: 16, max number of single strokes per 1 min: 12 Max distance between bolster plate and slide: 810 mm, Adjustment: 220 mm, Table (bolster plate) dimensions: -Left to right: 1600 mm, -Front to back: 1600 mm, Slide dimensions: -Left to right: 1600 mm, -Front to back: 1600 mm, Window in upright dimensions: -Left to right: 1650 mm, - Height: 1550 mm, Main motor: 110 kW, Dimensions: -Length: 4670 mm, -Width: 4670 mm, -Height from floor level: 8110 mm, Machine weight: 140000 kg.
119	ID MA31621 Make WMW Erfurt,Germany Model PKZE500 YOM 1981-1983 Condition Good Condition Photo See Photo Capacity: 500 tons, Number of slide strokes: 12 Slide strokes: 400 mm, Slide adjustment: 220 mm, Table: 1000 x 1400 mm, Total weight: 43000 kg. Quantity: 2 nos
120	ID MA31620 Make WMW Erfurt,Germany Model PKZ250/800 YOM 1975-1983 Condition Good Condition Photo See Photo Capacity: 250 ton, Stroke: 315 mm, Slide adjustment: 160 mm, Distance slide table: 800 mm, Die height: 555, Slide: 620 x 950 mm, Table: 800 x 1180 mm, Power: 28 kW, Total weight: 25000 kg, Quantity: 6 nos
121	ID MA31584 Make Manyo,Japan Model YOM Condition Good Condition Photo See Photo Capacity 200 ton Stroke 160 mm SPM 60 Adjust 100 mm Shut Height 480 mm Bolster 920 x 700 mm Slide 620 x 400 mm
122	ID MA31512 Make Erfurt Model PKZe-500 YOM Condition Good working condition Photo See Photo Capacity: 500 ton Slide effort at the distance of 160 mm to the lower dead point: 250 kN Number of single strokes per minute: 12 Slide stroke: 400 mm Slide adjustment: 220 mm Ejector stroke: 180 mm Thickness of plate with slots for fastening: 175 mm Inner height between plate with slots and pusher (stroke down, adjustment up): 675 mm Clearance between columns: 1000 mm Table area: 1000x1400 mm Table opening: 710x710 mm Pusher area: 800x1120 mm Table cushion: -Max. stroke: 160 mm -Stroke adjustment: 160 mm -Max. retention effort: 800 kN -Max. ejection effort: 125 kN Main motor power: 41 kW; 1320 rpm Power of pusher motor: 3,5 kW; 1420 rpm Number of revs of flywheel shaft: 630 rpm Press weight: 43 tons
123	ID MA31508 Make Voronezh Model K9538 YOM 1967 Condition Good Condition Photo See Photo Nominal effort: 630 tons Course stroke: 400 mm Number of strokes in a minute: 25 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Table size: 1250x1250 mm Main motor power: 56 kW Press overall dimensions: -Length: 3650 mm -Width: 3680 mm -Height: 6370 mm Press weight: 57500 kg
124	ID MA31473 Make Erfurt Model YOM Condition Good Condition Photo See Photo Trimming press 400ton Erfurt made
125	ID MA31472 Make Romanian Model YOM Condition Good Condition Photo See Photo Trimming press 400ton Romanian made
126	ID MA31465 Make TMP Voronezh Russia Model KG2538 YOM Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons,
127	ID MA31452 Make Model KV2536 YOM 1981 Condition Photo See Photo Capacity: 400 ton, Stroke: 250 mm, Table: 1000 x 1000 mm, Shut height: 510 mm, With cushion, Weight: 31,4 ton
128	ID MA31449 Make Bliss Model YOM Condition good mechanical condition Photo See Photo CAPACITY 160T Model S1 160 STROKE 250 mm DAYLIGHT 585 mm STROKING RATE 42 spm MOTORIZED RAM ADJUSTMENT 200 mm TABLE DIMENSIONS 1000 x 1000 mm RAM 860 860 mm TABLE HEIGH 840 mm DISTANCE BETWEEN UPRIGHTS 1072 mm LATERAL WINDOW YES TABLE OPENING OIL CENTRALIZED LUBRICATING MAIN MOTOR 18,5 kW CUSHION NO DIMENSION OF THE PRESS: WIDTH: 2250 mm DEPTH: 2100 mm HEIGHT: 5000 mm WEIGHT OF PRESS 16T
129	ID MA31448 Make Bliss Model YOM Condition good mechanical condition Photo See Photo CAPACITY 150T Model S1 150 STROKE 200 mm DAYLIGHT 670 mm STROKING RATE 70 spm MOTORIZED ADJUSTMENT 200 mm TABLE DIMENSIONS 840 X 890 mm RAM 850 X 800 mm FALSE TABLE 840 x 840 mm DISTANCE BETWEEN UPRIGHTS 940 mm RAM EJECTION STROKE: 80 mm LATERAL WINDOW 560 X H. 470 mm SPACE UNDER THE TABLE FOR A 810 x H. 445 mm CONVEYOR BELT OIL CENTRALIZED LUBRICATING MAIN MOTOR 18,5 Kw DIMENSION OF THE PRESS: WIDTH: 2800 mm DEPTH: 1770 mm HEIGHT: 4800 mm WEIGHT OF PRESS 15T NOTE: 4 CONNECTING RODS, BALANCING AND PNEUMATIC SECURE PIN
130	ID MA31447 Make Bentley Model YOM Condition good mechanical condition Photo See Photo CAPACITY 200 T STROKE 4" / 102 mm RAM ADJUSTMENT 125 mm CONTINUOUS STROKING RATE 30 st/min DAYLIGHT 660 mm TABLE AREA 870x1070 mm RAM AREA 700x760 mm MOTOR 20 HP DIMENSION WIDTH: 2100 mm DEPTH: 1600 mm HEIGHT: 4000 mm WEIGHT OF PRESS 18 T
131	ID MA31446 Make Wilkins & Mitchell Model YOM Condition good mechanical condition Photo See Photo CAPACITY 200T Model D48-S4-8 CONNECTING RODS 4 STROKE 200mm WEDGE ADJUSTMENT 10mm STROKING RATE 45st/min DAYLIGHT 410mm TABLE AREA 1195x840mm RAM AREA 1170x760mm MOTOR 18 HP DIMENSION WIDTH: 2020mm DEPTH: 2000mm HEIGHT: 4000mm WEIGHT OF PRESS 15,8T
132	ID MA31412 Make Model KB9534 YOM Production year 1984 And 1986 Condition very good technical condition Photo See Photo Capacity : 250 ton, Slide stroke :280 mm, Ram continuous stroke number in minute :32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size :800 x 800 mm, Aperture in table :500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment :140 mm, Bolster size : 850 x 850, Bolster thickness :140 mm, Main motor :27 kW, Dimensions - Length : 3260 mm, Width :2970 mm, Height :5180 mm, Machine weight : 25800 kg.
133	ID MA31410 Make Model K9538 YOM Condition Good Condition Photo See Photo Nominal effort: 630 tons Course stroke: 400 mm Number of strokes in a minute: 25 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Table size: 1250x1250 mm Main motor power: 56 kW Press overall dimensions: -Length: 3650 mm -Width: 3680 mm -Height: 6370 mm Press weight: 57500 kg
134	ID MA31392 Make Model K9538 YOM 1983 Condition Excellent Photo See Photo Nominal effort: 630 tons Course stroke: 400 mm Number of strokes in a minute: 25 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Table size: 1250x1250 mm Main motor power: 56 kW Press overall dimensions: -Length: 3650 mm -Width: 3680 mm -Height: 6370 mm Press weight: 57500 kg
135	ID MA31389 Make Voronez Model K9538 YOM 1985 Condition Very good condition Photo See Photo Rated force, kN 6300 Slider stroke, mm 420 Distance between table and slider, mm 750 Distance between table and slider, mm 750 Main motor power kW 55 Table size width / length mm 1250/1250 Dimensions of the machine Length Width Height (mm) 3200_3470_6150 Weight kg 5180
136	ID MA31386 Make Model K2535 YOM 1986 Condition Good Condition Photo See Photo Nominal effort : 315 ton, Slider stroke : 200 mm, Number of continuous strokes : 32/1 min, Number of single strokes : 24/1 min, Distance between bolster plate and slide : 560 mm, Distance adjustment between slide and table : 140 mm, Table dimensions : 1000 x 1000 mm, Slide dimensions : 800 x 800 mm, Press overall dimensions : 3070 x 2940 x 5310 mm, Press weight : 26200 kg.
137	ID MA31379 Make Model KA2538 YOM 1985 Condition Good Condition Photo See Photo 30 mm ,Ram stroke 322 mm , Strokes number 25 spm , Shut hight 620 mm , Table 1250 x 1250 mm , Ram 1200 x 1000 mm , Hole in table 800 x 800 mm , Window in column 750 x 400 mm , Press dimensions 3650 x 3680 x 6370 mm , Machine weight 53 tons
138	ID MA31343 Make Voronezh Model K9536 YOM Condition Good Condition Photo See Photo Rated force: 400 t Slider stroke: 360 mm Min. distance between table and slide: 6 mm Number of strokes min-1: 27 Number of the single cut-in min-1: 19 Maximum distance between table and slider (in lower position of slider): 470 mm Size of adjustment of distance between down-stamp a plate and slider: 160 mm Table overall dimensions: -From left to right: 1000 mm -From front to rear: 1000 mm -Height: 160 mm Slider overall dimensions: 800 x 800 mm Hole in the table: 630 x 630 mm Window in rack: 700 x 550 mm Main motor power: 45 kW Max. working strokes of hydro-air-cushion: 100 mm Max. force of pushing out: 12 t Hydro-air-cushion: -Max. working course: 100 mm -Max. force of pushing out: 12 t -Max. force of a clip: 63 t Press overall dimensions: 2900/3100/5580 mm Press weight: 34000 kg
139	ID MA31320 Make Voronezh Model KB2538 YOM 1986 Condition Good Condition Photo See Photo Maximum force: 630 tons Slider stroke length: 320 mm Number of courses of a slider per minute: 20 Max. distance between bolster and ram: 800 mm Adjustment: 180 mm Table size: 1250x1250 mm Slider overall dimensions: 1200x1000 mm Aperture in a table: 800x800 mm Window dimensions in cheeks: 750x400 mm Hydro-pneumatic pillow: available Press overall dimensions: 3659x3680x6370 mm Press weight: 55500 kg
140	ID MA31300 Make Ravne Model YOM 1989 Condition Good Condition Photo See Photo Maximum compression force before bottom dead point :250 Mp Number of work moves: 57 min Slide movement: 180 mm Slide regulation: 120 mm Distance between slide and working table Movement below – regulation above : 420 mm Table dimension: 1400 x 950 mm Slide dimension: 1380 x 800 mm Ticknes of clamping plate: 100 mm Electrical drive main Motor:N=30 KW N=1460 min Electrical Motor on slide: N=1,5 kw N=920 min
141	ID MA31299 Make Litostroj,Slovenia Model YOM 1988 Condition Good Condition Photo See Photo Overall Dimensions : 2600mm x 2200mm x 5300mm Table size : 1250mm x 1300mm Weight : 31,000t
142	ID MA31290 Make Erfurt Model YOM 1990 Condition Good Condition Photo See Photo Model : PMU630 (PKZ 630) Nominal power : 630ton Maximum stroke : 315 mm No of strokes/min : 20 Extractor force : 25 ton Cushion stroke : 140 mm Cushion force : 125 ton Distance between slides : 1140 mm Ram surface : 1020x1180 mm Main motor power : 75 KW Weight : 60 ton
143	ID MA31260 Make TMP VORONEZH Model KB9538 YOM 1983 Condition Good Condition Photo See Photo Capacity : 630 tons, Ram stroke : 400 mm, Number of ram strokes rate per minute : 20, Shut height : 570 mm, Bolster plate-to-ram adjustment stroke : 180 mm, Bed dimensions : 1,250 x 1,250 mm, Bed opening dimensions : 800 x 800 mm, Ram dimensions : 1000 x 1000 mm, Bolster plate thickness : 180 mm, Main drive motor power : 61 kw, Overall dimensions : 3600 x 3470 x 6190 mm, Mass : 49.8 tons.
144	ID MA31256 Make TMP Voronezh Russia Model KA2534 YOM 1981 Condition Good Condition Photo See Photo Nominal force, tons: 250 Slide stroke, mm : 200 Distance between table and slider, mm : 500 Slider adjustment, mm : 140 The frequency of the continuous strokes of the RAM, 1/min : 32 Table dimensions: width, length, mm : 800/800 Motor power of the main motion / total capacity, kW : 27 Dimensions, mm : 3260_2970_5180 Weight, kg : 23300
145	ID MA31240 Make Model KG9534 YOM 1990 Condition Good Condition Photo See Photo Capacity : 250 tons Ram stroke : 320 mm Ram continuous stroke number in minute : 32 Ram single stroke number per minute : 24 Ram size : 650x650 mm Table size : 800x800 mm Aperture in table : 500x500 mm Max. distance between bolster and ram : 390 mm Adjustment : 140 mm Bolster size : 850x850 Bolster thickness : 140 mm Main motor : 27 kW Dimensions : -Length : 3260 mm -Width : 2970 mm -Height : 5180 mm Machine weight : 18600 kg
146	ID MA31239 Make Voronezh Model K9536 YOM 1974 Condition Good Condition Photo See Photo Rated force : 400 t Slider stroke : 360 mm Min. distance between table and slide : 6 mm Number of strokes min-1 : 27 Number of the single cut-in min-1 : 19 Maximum distance between table and slider (in lower position of slider) : 470 mm Size of adjustment of distance between down-stamp a plate and slider : 160 mm Table overall dimensions : -From left to right : 1000 mm -From front to rear : 1000 mm -Height : 160 mm Slider overall dimensions : 800 x 800 mm Hole in the table : 630 x 630 mm Window in rack : 700 x 550 mm Main motor power : 45 kW Max. working strokes of hydro-air-cushion : 100 mm Max. force of pushing out : 12 t Hydro-air-cushion : -Max. working course : 100 mm -Max. force of pushing out : 12 t -Max. force of a clip : 63 t Press overall dimensions : 2900/3100/5580 mm Press weight : 34000 kg
147	ID MA31234 Make Model KB2534 YOM 1986 Condition Good Condition Photo See Photo Nominal force, kN 2500 Slide stroke, mm 200 Distance between table and slider, mm 560 The frequency of the continuous strokes of the RAM, min 40 Table dimensions: width, length, mm 800 - 800 Motor power of main motion total power, kW 35 Dimensions, mm 2700_2500_4690 Weight, kg 18600
148	ID MA31227 Make TMP VORONEZH Model KB9534 YOM 1981 Condition Good Condition Photo See Photo Capacity : 250 ton, Slide stroke : 280 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
149	ID MA31221 Make Model K2538 YOM Condition Good Condition Photo See Photo Nominal force, kN : 6,300 Ram stroke, mm : 320 Number of ram strokes per minute : 20 Shut height, mm : 620 Bolster plate-to-ram adjustment stroke, mm : 180 Bed dimensions, mm : 1,250 x 1,250 Ram dimensions, mm : 1000 x 1000 Bolster plate thickness, mm : 180 Main drive motor power, kW : 61 Overall dimensions, mm floor space : 3,600 x 3,470 height above floor level : 6,190 Mass, t,approx. : 49.6
150	ID MA31215 Make Model K9536 YOM 1974 Condition Good working condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 32.7 tons.
151	ID MA31200 Make Metalna Model KS1000 YOM 1984 Condition Good Condition Photo See Photo Capacity : 1000 ton Stroke : 700 mm Table : 2000 x 1400 mm
152	ID MA31199 Make Zdas Model LU400 YOM Condition Good Condition Photo See Photo Capacity : 400 ton. Table : 1,2 x 1 m Stroke : 250 mm Weight : approx. 30 t
153	ID MA31187 Make Model KG2134 YOM 1993 Condition Good Condition Photo See Photo 250 tons, ram stroke 25-200mm, no of strokes per min 61 or 25, shut height 560mm, bed to ram adjustment stroke 140mm, ram axis to frame distance 400mm, bed size 1120x750mm, ram size 930x730mm, main drive motor power 27 kw, overall dimensions 2500x2700mm, height above floor level 4300mm, mass 21.5 tons.
154	ID MA31185 Make Voronezh Model K9540 YOM 1970 Condition Good Condition Photo See Photo Capacity: 1000 t. Ram stroke: 500 mm. Ram stroke per Min.: 16 Shuth height: 900 mm. Bed to ram ajastuble stroke: 200 mm. Ram: 1500 x 1500 mm Main Motor: 100 kW Floor space: 4180x3800 mm. Height above floor level: 6950 mm.
155	ID MA31097 Make TMP Voronezh Russia Model KV2534 YOM 1998 Condition Good Condition Photo See Photo Capacity- 250 tons Slide stroke, mm 200 Distance between table and slider, mm 560 The frequency of the continuous strokes of the RAM, min 40 Table dimensions: width, length, mm 800 - 800 Motor power of main motion total power, kW 35 Dimensions, mm 2700_2500_4690 Weight, kg 18600
156	ID MA31096 Make Model KB9534 YOM Condition Good Condition Photo See Photo Nominal force, tons: 250 Slide stroke, mm: 320 Distance between table and slider, mm: 530 Slider adjustment, mm: 140 The frequency of the continuous strokes of the RAM, 1/min: 32 Table dimensions: width, length, mm: 800/800 Motor power of the main motion / total capacity, kW: 27 Dimensions, mm: 3260_2970_5180 Weight, kg: 23300
157	ID MI6953 Make Haulik Model HPV140 YOM Condition Photo See Photo Capacity- 140-160 ton
158	ID MA31068 Make TMP VORONEZH Model K9540 YOM Condition overhauled Photo See Photo Nominal force : 1000 tons Not reaching of lower dead point by the slide : 8 mm Slide stroke : 500 mm Number of continuous strokes per minute : 20 Max. number of single strokes per minute : 16 Closed height : 900 mm Adjustment of closed height : 200 mm Slide dimensions: Left-to-right: 1250 mm Front-to-back: 1250 mm Bolster plate dimensions: Left-to-right: 1250 mm Front-to-back: 1250 mm Main drive electric motor power: 75 kW Overall dimensions: Left-to-right: 4310 ± 40 mm Front-to-back: 3820 ± 40 mm Height above floor level: 6980 ± 60 mm Weight of press: 82230 kg
159	ID MA31050 Make Voronezh Model KB9534 YOM 1987 Condition Good Condition Photo See Photo Nominal force, tons: 250 Slide stroke, mm: 320 Distance between table and slider, mm: 530 Slider adjustment, mm: 140 The frequency of the continuous strokes of the RAM, 1/min: 32 Table dimensions: width, length, mm: 800/800 Motor power of the main motion / total capacity, kW: 27 Dimensions, mm: 3260_2970_5180 Weight, kg: 23300
160	ID MA31040 Make Model KA2534 YOM 1976 Condition working condition ,under power Photo See Photo Capacity- 250 tons The frequency of the continuous strokes of the slide not less , 32 Slide stroke, mm 200 Drive power, kW 23 The size of the stamp plate (table), 800x800mm The dimensions of the slide, 650x650mm Adjustment of shut height, mm 140 The nominal effort of press, kN 2500
161	ID MA31036 Make Wilkins & Mitchell Model YOM Condition Photo See Photo Capacity- 600 tons, Stroke- 254 mm, Wedge adjusment- 25 mm, Stroking rate- 35 st/min, Daylight- 559 mm, Table area- 1675 x 1145 mm, Ram Area- 1675 x 1295 mm, Motor- 45 Kw, Dimension: Width- 3400 mm, Depth- 3200 mm, Height- 5200 mm, Weight of press- 48 t
162	ID MA31018 Make Wagner Model Pd 315/0.9 YOM Condition Good Condition Photo See Photo Capacity- 315 Ton Stroke - 200 mm Strokes - 32 min^-1 Shut height - 800 mm Table size (left to right) - 860 mm Table size (front to back) - 800 mm Ram (left to right) - 850 mm Ram (front to back) - 790 mm Dimensions - 2500 x 2005 x 5000 mm (lxbxh) mm (lxwxh)mm (pxlxh) Weight of the press - 24,2 t Mode of operation - mechanical without electrical panel & motor
163	ID MA31009 Make TMP Voronezh Russia Model KA2534 YOM 1976 Condition Working Photo See Photo 250 tons The frequency of the continuous strokes of the slide not less , 32 Slide stroke, mm 200 Drive power, kW 23 The size of the stamp plate (table), 800x800mm The dimensions of the slide, 650x650mm Adjustment of shut height, mm 140
164	ID MA31002 Make Model KA2534 YOM Condition Good Condition Photo See Photo Capacity: 250 ton, Slider stroke: 200 mm, Slider strokes: 32 spm, Max. distance between table and slider: 560 mm, Distance adjustment between table and slider: 140 mm, Slider size: 650 x 650 mm, Table size: 800 x 800 mm, Table gap size: 500 x 500 mm, Width of table plate: 140 mm, Table height above floor: 690 mm, Cushion stroke: 100 mm, Machine dimensions: 3000 x 2970 x 5180 mm, machine weight: 23200 kg
165	ID MA30996 Make TMP Voronezh Russia Model K9540 YOM Condition Excellent Photo See Photo Max. force– 1000 ton Stroke – 500 mm Distance between table and slider – 900 mm Stroke per minut – 1/16 Table area – 1500x1500 mm Main motor – 100 kW Dimensions - 4180_3800_6950 mm Weight - 85 ton
166	ID MA30982 Make TMP Voronezh Russia Model KB9534 YOM 1986 Condition Photo See Photo Capacity : 250 ton, Slide stroke : 280 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
167	ID MI6935 Make Mankoo Model YOM 2006 Condition Good Condition Photo See Photo 150 Ton
168	ID MA30940 Make Model KB2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
169	ID MA30939 Make Model K2540 YOM 1981 Condition Good Condition Photo See Photo Trimming Press Make- Varonez MODEL - K 2540 Cap: 1000Tons Bed: 1250 x 1250mm Slide: 1460 x 1200mm Stroke: 400mm SPM: 20 Slide Adjustment: 15mm Shut Height: 730mm Opening in Bed : 800 x 800mm Opening in Uprights : 1260 x 780mm Rigid slide Knockout : 70mm Pneumatic Slide Knockout : 50mm Weight 77600 Kg.
170	ID MA30933 Make Model K9536 YOM 1974 Condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 32.7 tons.
171	ID MA30902 Make Smeral,Czech Model LDO800 YOM 1990 Condition Photo See Photo Capacity- 800 tons, Stroke- 320 mm, H FRAME, Motorized wedge adjusment- 180 mm, Stroking rate- 33 s.p.m, Daylight- 880 mm, Table Area- 1870 x 2300 mm, Ram Area- 1870 x 2300 mm, Motor- 75 kW, Lateral window- 600 (L) x 700 ( H), Dimension: Width- 3430 mm, Depth- 3300 mm, Height- 7000 mm, Height above floor- 6500 mm, Weight of press- 77T
172	ID MI6926 Make Mankoo Model YOM 2006 Condition Working Photo See Photo 150 ton
173	ID MA30890 Make Smeral,Czech Model LDO800 YOM 1996 Condition Reconditioned Photo See Photo Mechanische Presse Smeral LDO 800 A Presskraft 800 t Press capacity Force de pression Gesamtantriebsleistung 59 kW Total drive capacity Hub 320 mm Stroke Course Hubzahl 33 min^-1 Stroke rate Nombre de coups 880 mm Shut height H.O.F. Tischbreite 1870 mm Table size (left to right) 1320 mm Table size (front to back) 1870 mm Ram (left to right) 1320 mm Ram (front to back) 180 Abmessungen 3430 x 3300 mm Dimensions Height of machine above floor 6500mm 77 t Total weight
174	ID MA30864 Make Massey Model YOM Condition Good Condition Photo See Photo CAPACITY-200T STROKE -205 mm DAYLIGHT-560 mm STROKING RATE-48 spm DYE HOLDER ADJUSTMENT -19 mm TABLE DIMENSIONS-1270x865 mm RAM-1170X710 mm MOTOR CAPACITY -20 HP DIMENSION WIDTH:3555 mm DEPTH:-1625 mm HEIGHT: -3300 mm WEIGHT OF PRESS-15T NOTE: 4 CONNECTING RODS
175	ID MA30863 Make Wilkins & Mitchell Model YOM Condition Good Condition Photo See Photo CAPACITY- 200 tons CONNECTING RODS 4 STROKE 200mm WEDGE ADJUSTMENT 10mm STROKING RATE 45st/min DAYLIGHT 410mm TABLE AREA 1195x840mm RAM AREA 1170x760mm MOTOR 18 HP DIMENSION WIDTH: 2020mm DEPTH: 2000mm HEIGHT: 4000mm WEIGHT OF PRESS 15,8T
176	ID MA30840 Make Model K2538 YOM 1976 Condition Good Condition Photo See Photo 630Ton Trimming Press Model: K2538
177	ID MA30839 Make Model YOM Condition Good Condition Photo See Photo 1600Ton Voronez Trimming press, w/ 10spm, 8.6adj, table&slider..etc Slider stroke length 15.7inc SPM 10 Shut height 44inc Adjustment 8.6inc Table 70.8inc x 70.8inc Slider 56.6inc x 59inc Height table above floor level 16.7inc Window 49.2inc x 49.2inc Thickness of the die plate 12.5inc Main motor 125 kW Main motor rpm 1455 Windows in racks 61.4inc x 38.5inc Press Dimensions 198.8inc x 181.8inc x 343.3inc Weight of the machine 154 340kG Full retrofit of mechanical parts, pneumatic and lubrication system. Electric and a control panel should be installed at your side.
178	ID MA30838 Make Model YOM 1978 Condition Good Condition Photo See Photo 1600Ton Voronez Trimming press, w/ 10spm, 8.6adj, table&slider..etc Slider stroke length 23.6inc SPM 10 Shut height 41.7inc Adjustment 8.6inc Table 70.8inc x 70.8inc Slider 56.6inc x 59inc Press Dimensions 198.8inc x 181.8inc x 350inc Weight of the machine 157 570kG Main Motor None
179	ID MA30825 Make Voronezh Model K3044B YOM 1978 Condition Working Photo See Photo Nominal force tons 2500 Ram stroke mm 600 Number of strokes /min. 11 Shut height mm 1350 Bolster plate-to-ram adjustment stroke mm 500 Bed mm 3950 x 2000 Ram mm 4250 x 1800 Thickness of table plate mm 350 Windows in uprights, H/W: mm 1050 / 900 Qnt. cushion in bed: 3 Cushion stroke in bed: mm 270 Pushing/ejector capacity of cushion in bed by 5,2 kg/Sm2: 1000 kN Distance between uprights of press, mm 4300 mm Ejector capacity in ram: kN 400 Stroke of ejector in ram mm 150 Main drive motor kW 200 Motor of ram adjustment kW 17 Total power of all motors kW 224 Opening frame mm 1050 x 900 Dimensions of press - LxW mm 5685 x 8232 - Height above floor level mm 9465 Weight of press t, approx. 437
180	ID MA30812 Make Model K2538 YOM Condition Photo See Photo Capacity: 630 ton Stroke: 320 mm, Number of strokes: 20 min, Shut height: 800 mm, Adjustment: 180 mm, Bed: 1250 x 1250 mm, Main motor: 55 kW, weight: approx. 56 tons
181	ID MA30776 Make Model K9540 YOM 1970 Condition Working Photo See Photo Capacity : 1000 ton, Ram stroke : 500 mm, Number of ram strokes rate per minute : 20, Shut height : 680 mm, Bolster plate to ram adjustment stroke : 200 mm, Bed dimensions : 1250 x 1250 mm, Bed opening dimensions : 1000 x 1000 mm, Ram dimensions : 1250 x 1250 mm, Bolster plate thickness : 260 mm, Main drive motor power : 75 kW, Overall dimensions : floor space 4310 x 3820 mm, Height above floor level : 6790 mm, Weight of machine : 79.5 t. With ejectors & Cushions.
182	ID MA30763 Make Eumuco,Germany Model YOM Condition Good Condition Photo See Photo ADWP 31,5, Press capacity- 315 tons, Stroke- 300 mm, Strokes- 45 min^-1, Shut height- 900 mm, Table size ( left to right)- 1600 mm, Table size ( front to back)- 1000 mm, Ram ( left to right)- 1600 mm, Ram ( front to back)- 1000 mm, Ram adjusment- 125 mm, Driving power- 18,5 kW
183	ID MA30755 Make Wilkins & Mitchell Model L66-5-4-10 YOM Condition Good Condition Photo See Photo Press capacity- 600 t, Stroke- 254 mm, Stroke rate- 28 min-1, Shut height- 762 mm, Table size ( left to right)- 1650 mm, Table size ( front to back)- 1300 mm, Dimensions- 2900 x 5200 x 1550 mm, Total weight- 42.5 tons
184	ID MA30728 Make Smeral,Czech Model YOM 1981 Condition Photo See Photo SMERAL ZDAS LU 1000 C Force 1000 ton stroke 315 mm daylight 1200 mm table size 1600 x 1200 mm, ram size 1200 x 1200 mm Strokes per min 12 Stroke 400 mm Main drive 90 kW Weight 71 455 kg
185	ID MA30721 Make Kuzlitmash Model KA9536 YOM 1985 Condition Good Condition Photo See Photo Nominal force, tons: 400 Slide stroke, mm: 400 Distance between table and slider, mm: 630 The frequency of the continuous strokes of the RAM, 1/min: 25 Table dimensions: width, length, mm: 1000/1000 Motor power of the main motion / total capacity, kW: 43 Dimensions, mm: 3410_3140_5940 Weight, kg: 36700
186	ID MA30707 Make TMP Voronezh Russia Model KB2540 YOM Condition Photo See Photo The press has a status of new machines. The press is equipped with ejector and movable bed. This model has a hydraulic safety device in the slide. Rated force - 1000 t Slide stroke - 400 mm Frequency of the slide strokes per min – 20 Max distance between slider and bed - 730 mm Bed dimensions - 1250x1250 mm Slider dimensions - 1460x1200 mm Slider adjustment - 200 mm Overall width of machine - 4310 mm Overall depth of machine - 3870 mm Height above floor level - 6575 mm Overall weight (net) - 77 600 kg
187	ID MA30706 Make TMP Voronezh Russia Model KG2540 YOM 1984 Condition Photo See Photo Condition: The press has a status of almost new equipment. The press is equipped with ejector and movable bed Rated force - 1000 t Slide stroke - 400 mm Frequency of the slide strokes per min – 20 Max distance between slider and bed - 730 mm Bed dimensions - 1250x1250 mm Slider dimensions - 1265x1250 mm Slider adjustment - 200 mm Overall width of machine - 4310 mm Overall depth of machine - 3870 mm Height above floor level - 6790 mm Overall weight (net) - 77 100 kg
188	ID MA30705 Make TMP Voronezh Russia Model K2540 YOM 1980 Condition Good Condition Photo See Photo Rated force - 1000 t Slide stroke - 400 mm Frequency of the slide strokes per min – 16 Max distance between slider and bed - 950 mm Bed dimensions - 1500x1500 mm Overall width of machine - 4180 mm Overall depth of machine - 3800 mm Height above floor level - 6950 mm Overall weight (net) - 84 000 kg
189	ID MA30703 Make TMP Voronezh Russia Model KV2534 YOM 1986 Condition Photo See Photo Nominal force, kN 250 Slide stroke, mm 200 Distance between table and slider, mm 560 The frequency of the continuous strokes of the RAM, min 40 Table dimensions: width, length, mm 800 - 800 Motor power of main motion total power, kW 35 Dimensions, mm 2700_2500_4690 Weight, kg 18600
190	ID MA30680 Make Voronezh Model K9542 YOM 1978 Condition dismantled partially Photo See Photo Capacity - 1600 ton Slide stroke - 600 mm Number of slide strokes per min - 10 / 7 Shut height - 1060 mm Table height adjustment - 220 mm Table size - 1800 x 1800 mm Holes in table -1250 x 1250 mm Ram size - 1440 x 1500 mm Die bed thickness - 320 mm Main drive - 125 kW Dimensions - 5050 x 4620 x 8890 Press weight - 157.57 kg
191	ID MA30679 Make Voronezh Model K2542 YOM Condition retrofitted completely Photo See Photo Force, ton: 1600 Slider stroke length, mm: 400 Number of courses per min: 10 Shut height, mm: 1120 Adjustment, mm: 220 Slider, mm: 1440 x 1500 Table, mm: - from left to right: 1800 - from front to rear: 1800 Height of the table above floor level, mm: 425 Window dimensions in table: 1250 x 1250 Thickness of the die plate: 320 mm Main motor: 125 kW Main motor rpm: 1455 Windows in racks, mm: 1560 x 980 Press overall dimensions, mm: 5050 x 4620 x 8720 Weight of the machine, kg: 154 340 Condition: full retrofit of mechanical parts, pneumatic and lubrication system. Electric and a control panel should be installed at your side.
192	ID MA30678 Make Russian Model KV2534 YOM 1983 Condition Very good condition Photo See Photo 250 tons , ram stroke 200 mm, 32SPM , shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 1000 x 1000 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons.
193	ID MA30676 Make Voronezh Model KB2540 YOM 1992 Condition Photo See Photo Rated force - 1000 t Slide stroke - 400 mm Frequency of the slide strokes per min – 20 Max distance between slider and bed - 730 mm Bed dimensions - 1250x1250 mm Slider dimensions - 1460x1200 mm Slider adjustment - 200 mm Overall width of machine - 4310 mm Overall depth of machine - 3870 mm Height above floor level - 6575 mm Overall weight (net) - 77 600 kg Condition: The press has a status of new machines. The press is equipped with ejector and movable bed. This model has a hydraulic safety device in the slide.
194	ID MA30674 Make Voronezh Model K9538 YOM Condition Complete Photo See Photo Nominal effort: 630 tons Course stroke: 400 mm Number of strokes in a minute: 25 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Table size: 1250x1250 mm Main motor power: 56 kW Press overall dimensions: -Length: 3650 mm -Width: 3680 mm -Height: 6370 mm Press weight: 57500 kg
195	ID MA30635 Make Model KA2534 YOM 1975 Condition Photo See Photo Capacity: 250 ton, Slider stroke: 200 mm, Slider strokes: 32 spm, Max. distance between table and slider: 560 mm, Distance adjustment between table and slider: 140 mm, Slider size: 650 x 650 mm, Table size: 800 x 800 mm, Table gap size: 500 x 500 mm, Width of table plate: 140 mm, Table height above floor: 690 mm, Cushion stroke: 100 mm, Machine dimensions: 3000 x 2970 x 5180 mm, machine weight: 23200 kg
196	ID MA30634 Make Model K9536 YOM 1974 Condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 32.7 tons.
197	ID MA30624 Make Voronezh Model YOM 1979 Condition Working Photo See Photo Nominal force 1000t Slider stroke 400mm Slider strokes per minute 20 Die height 950mm Table 1500x1500mm Slider 1250x1250mm Machine weight 84t
198	ID MA30615 Make Voronezh Model K9538 YOM Condition Complete Photo See Photo Nominal effort: 630 tons Course stroke: 400 mm Number of strokes in a minute: 25 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Table size: 1250x1250 mm Main motor power: 56 kW Press overall dimensions: -Length: 3650 mm -Width: 3680 mm -Height: 6370 mm Press weight: 57500 kg
199	ID MA30579 Make Voronezh Model K9538 YOM Condition Complete Photo See Photo Nominal effort- 630 tons, Course stroke- 400 mm, Number of strokes in a minute- 25, Bolster plate-to-ram adjustable stroke- 180 mm, Max. distance plate-to-ram ( in lower position of slider)- 750 mm, Table size- 1250x1250 mm, Main motor power- 56 kW, Press overall dimensions: Length- 3650 mm, Width- 3680 mm, Height- 6370 mm, Press weight- 57500 kg
200	ID MA30527 Make Voronezh Model K2540 YOM 1979 Condition Good Condition Photo See Photo Maximum force: 1000 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 20 rpm Number of single turn-on: 15 rpm The closed height: 730 mm Adjustment: 200 mm Under-forging plate: -From left to right: 1250 mm -From front to rear: 1250 mm -Thickness: 260 mm Slider overall dimensions: 1200x1460 mm Aperture in a table: 800x800 mm Window dimensions in cheeks: 1260x780 mm Course of a rigid pusher in a slider: 70 mm Force of a rigid pusher in a slider ton-force: 50 Main electric motor power: 90 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 40 Hydro-pneumatic pillow: -Working course: 125 mm -Force of pushing out ton-force: 12 -Force of a clip ton-force: 125 Press overall dimensions: 4310x3870x6790 mm Press weight: 77100 kg
201	ID MI6836 Make TMP Voronezh Russia Model KB9538 YOM Condition Good Condition Photo See Photo Capacity : 630 tons, Ram stroke : 400 mm, Number of ram strokes rate per minute : 20, Shut height : 570 mm, Bolster plate-to-ram adjustment stroke : 180 mm, Bed dimensions : 1,250 x 1,250 mm, Bed opening dimensions : 800 x 800 mm, Ram dimensions : 1000 x 1000 mm, Bolster plate thickness : 180 mm, Main drive motor power : 61 kw, Overall dimensions : 3600 x 3470 x 6190 mm, Mass : 49.8 tons.
202	ID MA30436 Make TMP Voronezh Russia Model K2538 YOM 1980 Condition Good Condition Photo See Photo Capacity: 630 ton Stroke: 320 mm, Number of strokes: 20 min, Shut height: 800 mm, Adjustment: 180 mm, Bed: 1250 x 1250 mm, Main motor: 55 kW, weight: approx. 56 tons
203	ID MA30434 Make WMW Erfurt,Germany Model PKZE800 YOM Condition Good working condition Photo See Photo Capacity : 800 tons, Ram stroke : 400 mm, Ram adjustment : 185 mm, Shut heighgt : 630 mm, Distance between columns : 1250 mm, Table size : 1250 x 1650 mm, Ram size : 1000 x 1250 mm, Bolster thickness : 220 m, Main motor power : 55 kW, Press weight : 77 tons
204	ID MA30432 Make TMP Voronezh Russia Model KG2538 YOM 1990 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons,
205	ID MI6790 Make TMP Voronezh Russia Model YOM Condition Good Condition Photo See Photo Capacity: 250 ton, Slider stroke: 200 mm, Slider strokes: 32 spm, Max. distance between table and slider: 560 mm, Distance adjustment between table and slider: 140 mm, Slider size: 650 x 650 mm, Table size: 800 x 800 mm, Table gap size: 500 x 500 mm, Width of table plate: 140 mm, Table height above floor: 690 mm, Cushion stroke: 100 mm, Machine dimensions: 3000 x 2970 x 5180 mm, machine weight: 23200 kg
206	ID MI6785 Make Massey,UK Model YOM Condition Reconditioned Photo See Photo Capacity: 120 ton, Completely reconditioned
207	ID MA30400 Make TMP Voronezh Russia Model KB2540 YOM Condition Good Condition Photo See Photo Capacity : 1000 tons, Ram stroke : 400 mm, No. of strokes : 20 per min., Bed size : 1250 x 1250 mm, Shut height : 730 mm, Bolster plate to ram adjustment stroke : 200 mm, Ram dimensions : 1200 x 1200 mm, Bolster plate thickness : 260 mm, Overall dimensions : 4310 x 3820 x 6575 mm, Main drive motor power : 75 kw, Cushion capacity : 250 ton, Cushion stroke : 70 mm, Weight : 77.1 tons.
208	ID MI6751 Make Guillem Model YOM Condition Photo See Photo CAPACITY: 200 TONS, MOTOR :- 15 C.V, CYCLES / MIN :- 50 - 60, M / C Weight :- 10,500, CENTRLISED LUBRICATION SYSTEM
209	ID MA30341 Make TMP Voronezh Russia Model KB2536 YOM 1988 Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
210	ID MI6732 Make Basant Model YOM Condition Good Condition Photo See Photo C type press, Capacity: 75 ton
211	ID MA30262 Make WMW Erfurt,Germany Model PKZE500 YOM Condition Good Condition Photo See Photo Stock (guide bar) is missed. Capacity- 500 tones Slider's travel - 400 mm Slider's regulation - 220 mm
212	ID MA30230 Make Ravne,Germany Model YOM 1982 Overhauled 2005 Condition Good Condition Photo See Photo Capacity : 630 ton, Table size : 1700 x 1200 mm,
213	ID MA30214 Make TMP Voronezh Russia Model KB9534 YOM 1978 Condition Good Condition Photo See Photo Capacity : 250 ton, Slide stroke : 280 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
214	ID MA30169 Make TMP Voronezh Russia Model KG2540 YOM 1993 Condition Good Condition Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons.
215	ID MI6667 Make Kieserling Model YOM Condition Good Condition Photo See Photo Capacity : 600 Ton.
216	ID MI6636 Make WMW Erfurt,Germany Model PKZE500 YOM Condition working condition ,under power Photo See Photo Capacity: 500 ton Stroke – 400 mm Ram Adjustment – 220 mm Shut Height – 675 mm Table Size – 1400 x 1000 mm Ram Size – 1120 x 800 mm SPM – 12 Press Weight – 43000 kg With Die Cushion and PLC Electric Panel
217	ID MA30112 Make TMP Voronezh Russia Model KA9540 YOM 1987 Condition Good Condition Photo See Photo Capacity : 1000 ton, Ram stroke : 500 mm, Number of ram strokes rate per minute : 20, Shut height : 680 mm, Bolster plate to ram adjustment stroke : 200 mm, Bed dimensions : 1250 x 1250 mm, Bed opening dimensions : 1000 x 1000 mm, Ram dimensions : 1250 x 1250 mm, Bolster plate thickness : 260 mm, Main drive motor power : 75 kW, Overall dimensions : floor space 4310 x 3820 mm, Height above floor level : 6790 mm, Weight of machine : 79.5 t
218	ID MA29900 Make TMP Voronezh Russia Model K9538 YOM Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up) : 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8.
219	ID MA29898 Make TMP Voronezh Russia Model KB2538.01 YOM 1986 Condition Good Condition Photo See Photo Capacity : 630 tons, Ram stroke : 320 mm, Stroke per minute : 20 SPM, Shut height : 620 mm, Bolster plate to ram adjustment stroke : 180 mm, Bed dimensions : 1250 x 1250 mm, Ram dimensions : 1000 x 1000 mm, Bolster plate thickness : 180 mm, Main drive motor power : 61 kW, Overall dimensions : 3600 x 3470 x 6190 mm, Mass : 49.6 tons.
220	ID MA29818 Make Smeral,Czech Model LKO315 YOM 1977 Condition Good Condition Photo See Photo Nominal forming force : 3090 kN, Stroke : 180 mm, Shut height : 530 mm, Slide adjustment : 115 mm, Number of strokes per 1 min : 30, Bed size : 1250 x 800 mm, The largest distance from the slider to the table : 710 mm, Electric motor output : 22 kW, Dimensions :- Length : 2400 mm, Width : 1700 mm, Height : 4535 mm, Total weight : 17 tons.
221	ID MA29781 Make Smeral,Czech Model LDO315 YOM Condition Good Condition Photo See Photo Nominal Capacity : 315 ton, Table dimensions : 1370 x 950 mm, Stroke : 200 mm, Height : 5040 mm, Shots : 44 nr/min, Ram : 1370 x 950 mm, Ram Adjustment : 15 mm, Width : 2610 mm, Weight : 27350 kg.
222	ID MA29464 Make TMP Voronezh Russia Model KV2536 YOM 1989 Condition Good Condition Photo See Photo Capacity: 400 ton, Stroke: 250 mm, Table: 1000 x 1000 mm, Shut height: 510 mm, With cushion, Weight: 31,4 ton
223	ID MA29441 Make TMP Voronezh Russia Model KA2534 YOM 1983 Condition Good Condition Photo See Photo Capacity: 250 ton, Slider stroke: 200 mm, Slider strokes: 32 spm, Max. distance between table and slider: 560 mm, Distance adjustment between table and slider: 140 mm, Slider size: 650 x 650 mm, Table size: 800 x 800 mm, Table gap size: 500 x 500 mm, Width of table plate: 140 mm, Table height above floor: 690 mm, Cushion stroke: 100 mm, Machine dimensions: 3000 x 2970 x 5180 mm, machine weight: 23200 kg
224	ID MA29405 Make TMP Voronezh Russia Model K2540 YOM 1977 Condition Good Condition Photo See Photo Capacity : 1000 tons, Ram stroke : 400 mm, No. of strokes : 20 per min., Bed size : 1250 x 1250 mm, Shut height : 730 mm, Bolster plate to ram adjustment stroke : 200 mm, Ram dimensions : 1200 x 1200 mm, Bolster plate thickness : 260 mm, Overall dimensions : 4310 x 3820 x 6575 mm, Main drive motor power : 75 kw, Cushion capacity : 250 ton, Cushion stroke : 70 mm, Weight : 77.1 tons.
225	ID MA29328 Make Russian Model KD2128K YOM 1987/1988 Condition Good Condition Photo See Photo Capacity: 630 ton, Ram stroke: 10-100 mm, Number of ram stroke per minute: 140, Shut height: 340 mm, Bed to ram adjustment stroke: 80 mm, Ram axis to frame distance (overhang): 260 mm, Bed dimensions: 710 x 480 mm, Bed opening dimensions: 360 x 240 mm, Ram dimensions: 370 x 310 mm, Bolster plate thickness: 85 mm, Main drive motor power: 6.3 kW, Overall dimensions of the press: Floor space: 1500 x 1630 mm, Height above floor level: 2930 mm, Weight: 5.4 ton. Quantity:3 no
226	ID MA29327 Make Zdas Model LU160 YOM 1984 Condition Good Condition Photo See Photo 160 tons , shut height 572 mm, ram stroke 125 mm, 28 SPM , voltage 380V , motor 1460 RPM , dimension 2040 x 1575 x 4035 mm, weight 9880 mm, ram size 620 x 610 mm, table size 625 x 795 mm
227	ID MA29326 Make Russian Model K2122 YOM 1980 Condition Good Condition Photo See Photo Nominal force:160 ton, Ram stroke: 5-55 mm, Number of ram strokes per minute:190, Shut height: 220 mm, Bed to ram adjustment stroke: 45 mm, Ram axis to frame distance (overhang): 160 mm, Bed dimensions: 420 x 280 mm, Bed opening dimensions: 210 x 140 mm, Ram dimensions: 220 x 190 mm, Bolster plate thickness: 70 mm, Main drive motor power: 1.7 kW, Overall dimensions of the press Floor space: 1,060 x 990 mm, Height above floor level: 1870 mm, Mass approx: 1.3 ton.
228	ID MA29307 Make TMP Voronezh Russia Model KB2536 YOM 1989 Condition Good Condition Photo See Photo Capacity: 400 tons, Sliders travel: 250 mm, Distance between table and slider: 510 mm, Table: 1000 x 1000 mm, Dimensions: 3470 x 3140 x 5940 mm, Weight: 31400 kg.
229	ID MA29305 Make TMP Voronezh Russia Model K2538 YOM Condition Good Condition Photo See Photo Capacity: 630 tones, Slider's travel: 320 mm, Distance between table and slider: 800 mm, Table: 1250 x 1250 mm, Dimensions: 3200 x 3470 x 6100 mm, Weight: 51250 kg.
230	ID MA29285 Make TMP Voronezh Russia Model KG9532 YOM 1990 Condition Good Condition Photo See Photo Capacity: 160 ton.
231	ID MA29281 Make TMP Voronezh Russia Model KB2534 YOM 1990 Condition Good Condition Photo See Photo Capacity : 250 tons, Ram stroke : 200 mm, Stroke per minute : 32, Shut height : 420 mm, Bolster plate to ram adjustment stroke : 140 mm, Bed dimensions : 800 x 800 mm, Ram dimensions : 650 x 650 mm, Bolster plate thickness : 140 mm, Main drive motor power : 27 kW, Overall dimensions : 3260 x 2970 x 5180 mm, Mass 23.2 tons.
232	ID MA29228 Make WMW Erfurt,Germany Model PKZE800 YOM Condition Good Condition Photo See Photo Capacity : 800 tons, Ram stroke : 400 mm, Ram adjustment : 185 mm, Shut heighgt : 630 mm, Distance between columns : 1250 mm, Table size : 1250 x 1650 mm, Ram size : 1000 x 1250 mm, Bolster thickness : 220 m, Main motor power : 55 kW, Press weight : 77 tons
233	ID MA28902 Make TMP Voronezh Russia Model K2540 YOM 1980 Condition Good Condition Photo See Photo Maximum force:1000 tons, Slider stroke length:400 mm, Unattaiable course: 12 mm, Number of courses of a slider per minute:20 rpm, Number of single turn on: 15 rpm, The closed height:730 mm, Adjustment:200 mm, Under forging plates From left to right:1250 mm, From front to rear:1250 mm, Thickness:260 mm, Slider overall dimensions: 1200 x 1460 mm, Aperture in a table:800 x 800 mm, Window dimensions in cheeks:1260 x 780 mm, Course of a rigid pusher in a slider: 70 mm, Force of a rigid pusher in a slider ton force:50, Main electric motor power: 90 kW, Course of pneumatic pillow: 160 mm, Force of pushing out of a pneumatic pillow ton force:40, Hydro pneumatic pillow: Working course:125 mm, Force of pushing out ton force:12, Force of a clip ton force:125, Press overall dimensions: 4310 x 3870 x 6790 mm, Press weight: 77100 kg.
234	ID MA28841 Make Smeral,Czech Model LE400C YOM 1984 Condition Good Condition Photo See Photo Capacity:400 ton, Slide stroke:30-160 mm, Number of slide strokes:40/min, Table dimensions:1250 x 825 mm, Slide dimensions:950 x 560 mm, Slide adjustment:120 mm, Main motor output:30 kW, Dimensions L x W x H: 1550 x 29900 x 3360 mm, Machine weight:21 ton
235	ID MA28840 Make TMP Voronezh Russia Model K5535 YOM Condition Good Condition Photo See Photo Effort of: outer slide 315 t, inner slide 200 t Stroke of: outer slide 670 mm, inner slide 420 mm 10 s.p.m. Distance between slides and table 950 mm Slide adjustment 200 mm Table 1500 x 1500 mm Slides: inner 1000 x 1000, outer 1300 x 1500 mm Weight 60 t
236	ID MA28827 Make Zdas Model LUD500 YOM 1965 Condition Good Condition Photo See Photo Press forces (nominal) 500 to Hole inside 550 mm Table 1600 x 1240 mm Ram 1250 x 1200 mm. Daylight 400 mm Ram stroke 250 stroke rate (max.)- 20 s.p.m. ram adjustment 130 mm Supply of compressed air- 6 atm The main electric motor 50 kW Machine weight ca. : 30 000 kg Dimensions: WxLxH : 2900 (3390 with the side stair) x 1700 x 4800 mm
237	ID MA28809 Make Smeral,Czech Model LE400C YOM 1981 Condition Good Condition Photo See Photo Pressure : 400 tones, Overhang : 450 mm, Strokes range : 30..160 mm, Bottom slide's regulation : 120 mm, Nominal number of strokes : 40 spm, Allowable number of single strokes : 20 spm, Table's plate area : 1250 x 825 mm, Hole in the table's plate : diameter : 400 H8/370 H 11 mm, Table's plate's thickness : 140 mm, Table's area : 1250 x 900 mm, Table's variation : 630/460, diam. 450, Pressing area of the slider : 950 x 560 mm, Distance between slider and table : 630 mm, Main motor's power : 30 kW, Motor's revolution : 14600 rpm,
238	ID MA28672 Make Smeral,Czech Model LKO500 YOM Condition Good Condition Photo See Photo Capacity : 500 ton, Length of working table area : 450 mm, Width of working table area : 180 mm, Slide stroke : 129.5 mm, Main motor output : 30 kW, Dimensions L x W X H : 4100 x 3400 x 2020 mm, Weight : 47000 kg.
239	ID MA28671 Make TMP Voronezh Russia Model K9538 YOM Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton. Qty : 2 nos.
240	ID MA28662 Make TMP Voronezh Russia Model KA9542 YOM 1986 Condition Good Condition Photo See Photo 1600 tons , ram stroke 630 mm , 16 ram strokes/min , shut height 810 mm , bolster plate to ram adjustment stroke 220 mm , bed dimensions 1600 x 1600 mm , bed opening dimensions 1000 x 1000 mm , ram dimensions 1600 x 1600 mm , bolster plate thickness 650 mm , main drive motor power 110 kW , overall dimensions 4670 x 4670 x 8110 mm , mass 139.8 tons
241	ID MA28643 Make TMP Voronezh Russia Model K9536 YOM 1981 Condition Good,unused Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 32.7 tons.
242	ID MA28640 Make TMP Voronezh Russia Model KB2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
243	ID MA28636 Make TMP Voronezh Russia Model K9538 YOM Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
244	ID MA28626 Make TMP Voronezh Russia Model K9538 YOM 1984 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
245	ID MA28624 Make TMP Voronezh Russia Model KB9534 YOM Condition Good Condition Photo See Photo Capacity : 250 ton, Slide stroke : 280 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
246	ID MA28610 Make TMP Voronezh Russia Model KB9534 YOM 1985 Condition Good Condition Photo See Photo Capacity : 250 ton, Slide stroke : 280 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
247	ID MA28608 Make TMP Voronezh Russia Model KB9536 YOM 1992 Condition Good Condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons.
248	ID MA28591 Make TMP Voronezh Russia Model KB9534 YOM 1983 Condition Reconditioned Photo See Photo Capacity : 250 ton, Slide stroke : 280 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 23,8 ton Reconditioner with electrical and hydraulica systems
249	ID MA28588 Make TMP Voronezh Russia Model K2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
250	ID MA28586 Make TMP Voronezh Russia Model K9542 YOM 1986 Condition Good Condition Photo See Photo 1600 tons , ram stroke 630 mm , 16 ram strokes/min , shut height 810 mm , bolster plate to ram adjustment stroke 220 mm , bed dimensions 1600 x 1600 mm , bed opening dimensions 1000 x 1000 mm , ram dimensions 1600 x 1600 mm , bolster plate thickness 650 mm , main drive motor power 110 kW , overall dimensions 4670 x 4670 x 8110 mm , mass 139.8 tons.
251	ID MA28583 Make TMP Voronezh Russia Model K9538 YOM 1974 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
252	ID MA28578 Make TMP Voronezh Russia Model K9538 YOM Condition Excellent,Fully reconditioned Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
253	ID MA28571 Make AIDA,Japan Model YOM Condition Good Condition Photo See Photo Capacity: 400 ton, Stroke: 140 mm, Stroke per minute: 45, Die height: 370 mm, Slide adjustment: 15 mm, Slide: 500 x 370 mm, Bolster: 600 x 480 mm, Main motor: 30 Kw.
254	ID MA28557 Make TMP Voronezh Russia Model K2538 YOM 1986 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
255	ID MA28545 Make TMP Voronezh Russia Model K9540 YOM 1983 Condition Good Condition Photo See Photo Capacity : 1000 ton, Ram stroke : 500 mm, Number of ram strokes rate per minute : 20, Shut height : 680 mm, Bolster plate to ram adjustment stroke : 200 mm, Bed dimensions : 1250 x 1250 mm, Bed opening dimensions : 1000 x 1000 mm, Ram dimensions : 1250 x 1250 mm, Bolster plate thickness : 260 mm, Main drive motor power : 75 kW, Overall dimensions : floor space 4310 x 3820 mm, Height above floor level : 6790 mm, Weight of machine : 79.5 t. With ejectors & Cushions.
256	ID MA28542 Make Eumuco,Germany Model VP250 YOM Condition Good Condition Photo See Photo Press Capacity : 250 ton, Drive capacity : 12 kW, Ram stroke : 220 mm, Stroke rate : 50 min-1, Shut Height : 445 mm, Table size (left to right) : 1280 mm, Table size (front to back) : 1000 mm, Ram adjustment : 75 mm.
257	ID MA28541 Make Wagner,German Model PD200/1.25 YOM Condition Good Condition Photo See Photo Press Capacity : 200 ton, Ram stroke : 250 mm, Stroke rate : 24 min-1, Shut Height : 700 mm, Table size (left to right) : 1200 mm, Table size (front to back) : 900 mm, Clamping plate thickness : 160 mm, Ram (left to right) : 1000 mm, Ram (front to back) : 800 mm, Ram adjustment : 150 mm, Return power of ram : 25 t, Distance between the columns : 1250 mm. Mode of operation mechanical. Machine requires new electrics and new main motor, mechanically it is good.
258	ID MA28536 Make TMP Voronezh Russia Model K2538 YOM 1978 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
259	ID MA28532 Make TMP Voronezh Russia Model K2542 YOM 1979 Condition Good Condition Photo See Photo Capacity : 1600 tons, Ram stroke : 400 mm, Stroke per minute : 16, Shut height : 870 mm, Bolster plate to ram adjustment stroke : 220 mm, Bed dimensions : 1600 x 1600 mm, Ram dimensions : 1600 x 1600 mm, Bolster plate thickness : 650 mm, Main drive motor power : 110 kW, Cushion capacity : 20 to 350 Tons, Cushion stroke : 250 mm, Overall Dimensions : 4670 x 4670 x 8110 mm, Mass : 141.5 tons.
260	ID MA28530 Make TMP Voronezh Russia Model KA9536 YOM 1982 Condition Excellent Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons.
261	ID MA28523 Make IMV,Italy Model Unused YOM Condition Good Condition Photo See Photo Capacity : 600 ton, Ram Stroke : 350 mm, Light between columns : 1000 x 1300 mm, Motor : 35 HP.
262	ID MA28517 Make TMP Voronezh Russia Model K9538 YOM 1975 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
263	ID MA28516 Make TMP Voronezh Russia Model K9536 YOM 1975 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons,Quantity: 2 nos.
264	ID MA28511 Make Zdas Model LU1000C YOM 1976 Condition Good Condition Photo See Photo Capacity : 1000 ton, Ram stroke : 400 mm, No of stroke per minute : 12 min, Adjustment ram : 190 mm, Main motor : 90 kW, Table size : 1000 x 1000 mm, Weight : 72 tons approx. With Ejector. Qty : 4 nos.
265	ID MA28488 Make TMP Voronezh Russia Model KB2542 YOM Condition Good Condition Photo See Photo 1600 tons, Ram stroke : 400 mm,Stroke Per Min :16 , shut height 870 mm, bolster plate to ram adjustment stroke 220 mm, bed dimensions 1600 x 1600 mm, ram dimensions 1600 x 1600 mm, bolster plate thickness 650 mm, main drive motor power 110 kW , overall dimensions 4670 x 4670 x 8110 mm, mass 141.5 tons .
266	ID MA28484 Make TMP Voronezh Russia Model K2542 YOM 1979 Condition Good working condition Photo See Photo Capacity : 1600 tons, Ram stroke : 400 mm, Stroke per minute : 16, Shut height : 870 mm, Bolster plate to ram adjustment stroke : 220 mm, Bed dimensions : 1600 x 1600 mm, Ram dimensions : 1600 x 1600 mm, Bolster plate thickness : 650 mm, Main drive motor power : 110 kW, Cushion capacity : 20 to 350 Tons, Cushion stroke : 250 mm, Overall Dimensions : 4670 x 4670 x 8110 mm, Mass : 141.5 tons.
267	ID MI6300 Make Wilkins & Mitchell Model YOM Condition Good Condition Photo See Photo Capacity : 100 ton, Stroke : 200 mm, Bed size : 600 x 425 mm, Stroke per minute : 60 SPM. Qty : 2 nos.
268	ID MA28462 Make WMW Erfurt,Germany Model PKZE1250 YOM Condition Good Condition Photo See Photo Press Capacity : 1250 ton, Ram Stroke : 500 mm, Stroke rate : 8 min-1, Shut height : 1100 mm, Table size (left to right) : 1600 mm, Table size (front to back) : 1800 mm, Ram (left to right) : 1300 mm, Ram (front to back) : 1400 mm, Ram adjustment : 215 mm, Driving power : 100 kW, Dimension W x D : 4000 x 3200 mm, Height of machine above floor : 7900 mm, Distance between the columns (left to right) : 1600 mm, Total Weight : 135 t.
269	ID MA28436 Make TMP Voronezh Russia Model KB9534 YOM 1977 Condition Very good condition Photo See Photo Capacity : 250 ton, Slide stroke : 280 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
270	ID MA28421 Make TMP Voronezh Russia Model KG9534 YOM 1990 Condition Good Condition Photo See Photo Capacity 250 tons, bed size 800 x 800 mm,Frequency of slider motions: 1/min 45, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, Regulation of distance between table and slider: 140 mm, bed dimensions 800 x 800 mm, bed opening dimensions 500 x 500 mm, ram dimensions 670 x 630 mm, bolster plate thickness 140 mm,Motion: 530 mm, main drive motor power 25,0 kW, overall dimensions(length,width,height):2400 x 2500 x 4850 mm height above floor level: 5180 mm, Weight of the machine: 18600 kg
271	ID MA28409 Make TMP Voronezh Russia Model KB9534 YOM 1978 Condition Good Condition Photo See Photo Capacity : 250 ton, Ram stroke : 320 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
272	ID MA28399 Make TMP Voronezh Russia Model K2542 YOM 1981 Condition Good Condition Photo See Photo Capacity : 1600 tons, Ram stroke : 400 mm, Stroke per minute : 16, Shut height : 870 mm, Bolster plate to ram adjustment stroke : 220 mm, Bed dimensions : 1600 x 1600 mm, Ram dimensions : 1600 x 1600 mm, Bolster plate thickness : 650 mm, Main drive motor power : 110 kW, Cushion capacity : 20 to 350 Tons, Cushion stroke : 250 mm, Overall Dimensions : 4670 x 4670 x 8110 mm, Mass : 141.5 tons. Press with Hydraulic overload system. Press with 2 cushion - upper & lower. Hydro pneumatic cushion in table. Capacity : 320 tons, Ejection capacity : 25 ton, Working stroke : 200 mm, Pneumatic Cushion in table :- Capacity : 71 ton, Working stroke : 160 mm, Pneumatic ejector in ram :- Capacity : 50 ton, Working stroke : 50 mm, With moving bolster.
273	ID MA28376 Make Smeral,Czech Model LDO315 YOM 1984 Condition Disassembled Photo See Photo 315 tons, ram stroke 200 mm, max. distance between table & ram 900 mm, ram adjustment 20 mm, 44 continuous strokes/min,20 strokes/min., distance from table to slides 1400 mm, table size 1380x950 mm, ram size 1250x900 mm, opening in table 520x420 mm, height of press from floor 4800 mm, main motor power 30 kW, press weight 27 tons, working pressure of clutch 4,5 atmospheres, 0,45 MPA, consumption of air pressure 70 Litres per stroke, Dimensions 2300x2350x4900 mm.
274	ID MA28353 Make TMP Voronezh Russia Model K2540 YOM 1980 Condition Good working condition Photo See Photo Capacity : 1000 tons, Ram stroke : 400 mm, No. of strokes : 20 per min., Bed size : 1250 x 1250 mm, Shut height : 730 mm, Bolster plate to ram adjustment stroke : 200 mm, Ram dimensions : 1200 x 1200 mm, Bolster plate thickness : 260 mm, Overall dimensions : 4310 x 3820 x 6575 mm, Main drive motor power : 75 kw, Cushion capacity : 250 ton, Cushion stroke : 70 mm, Weight : 77.1 tons.
275	ID MA28350 Make TMP Voronezh Russia Model K2542 YOM Condition Excellent ,unused Photo See Photo 1600 tons , ram stroke 400 mm, 16 SPM , shut height 870 mm, bolster plate to ram adjustment stroke 220 mm, bed dimensions 1600 x 1600 mm, ram dimensions 1600 x 1600 mm, bolster plate thickness 650 mm, main drive motor power 110 kW , Cushion capacity - 20 to 350 Tons, Cushion stroke : 250 mm, overall dimensions 4670 x 4670 x 8110 mm, mass 141.5 tons, 2 nos.
276	ID MA28348 Make TMP Voronezh Russia Model K2542 YOM 1979 Condition Good Condition Photo See Photo 1600 tons , ram stroke 400 mm, 16 SPM , shut height 870 mm, bolster plate to ram adjustment stroke 220 mm, bed dimensions 1600 x 1600 mm, ram dimensions 1600 x 1600 mm, bolster plate thickness 650 mm, main drive motor power 110 kW , Cushion capacity - 20 to 350 Tons, Cushion stroke : 250 mm, overall dimensions 4670 x 4670 x 8110 mm, mass 141.5 tons.
277	ID MA28347 Make WMW Erfurt,Germany Model PKZE500 YOM 1980 Condition Good Condition Photo See Photo Capacity : 500 tons, Ram Stroke : 400 mm, Ram Adjustment : 220 mm, No. of Strokes/min : 12, Shut Height : 675 mm, Distance between columns : 1000 mm, Table Size : 1000 x 1400 mm, Ram Size : 800 x 1120 mm, Bore in Table : 710 x 710 mm, Main Motor : 39 KW, Die Cushion capacity : 80 tons, Ejector power of cushion : 12.5 Mp, Stroke of ejector : 180 mm, Die Cushion Stroke : 160 mm, Height from floor : 6200 mm, Press Weight : 43 tons approx, With cushion.
278	ID MA28328 Make TMP Voronezh Russia Model K2538 YOM 1975 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
279	ID MA28314 Make WMW Erfurt,Germany Model PKZE500 YOM Condition Good Condition Photo See Photo Capacity : 500 tons, Ram Stroke : 400 mm, Ram Adjustment : 220 mm, No. of Strokes/min : 12, Shut Height : 675 mm, Distance between columns : 1000 mm, Table Size : 1000 x 1400 mm, Ram Size : 800 x 1120 mm, Bore in Table : 710 x 710 mm, Main Motor : 39 KW, Die Cushion capacity : 80 tons, Ejector power of cushion : 12.5 Mp, Stroke of ejector : 180 mm, Die Cushion Stroke : 160 mm, Height from floor : 6200 mm, Press Weight : 43 tons approx. Qty 2 nos.
280	ID MA28288 Make TMP Voronezh Russia Model KA9033 YOM Condition Good Condition Photo See Photo Capacity : 200 ton, Ram stroke : 200 mm, Number of ram strokes per min : 50, Shut height : 450 mm, Bolster plate to ram adjustment stroke : 20 mm, Bed dimension : 1,250 x 900 mm, Ram dimension : 1250 x 800 mm, Bolster plate thickness : 180 mm, Main drive motor power : 22 kw, Overall dimensions : Floor space : 4010 x 2960 mm, Height above floor level : 4885, Mass t approx : 41 ton.
281	ID MA28287 Make TMP Voronezh Russia Model KA9033 YOM Condition Used Photo See Photo Capacity : 200 ton, Ram stroke : 200 mm, Number of ram strokes per min : 50, Shut height : 450 mm, Bolster plate to ram adjustment stroke : 20 mm, Bed dimension : 1,250 x 900 mm, Ram dimension : 1250 x 800 mm, Bolster plate thickness : 180 mm, Main drive motor power : 22 kw, Overall dimensions : Floor space : 4010 x 2960 mm, Height above floor level : 4885, Mass t approx : 41 ton.
282	ID MA28285 Make TMP Voronezh Russia Model KB2540 YOM Condition Good Condition Photo See Photo Capacity : 1000 tons, Ram stroke : 400 mm, No. of strokes : 20 per min., Bed size : 1250 x 1250 mm, Shut height : 730 mm, Bolster plate to ram adjustment stroke : 200 mm, Ram dimensions : 1200 x 1200 mm, Bolster plate thickness : 260 mm, Overall dimensions : 4310 x 3820 x 6575 mm, Main drive motor power : 75 kw, Cushion capacity : 250 ton, Cushion stroke : 70 mm, Weight : 77.1 tons.
283	ID MI6280 Make Milap Model YOM 2009-2010 Condition Good Condition Photo See Photo H frame body Capacity: 250 ton, Area of bolster: 850 x 900 mm, Distance between bed and ram: 550 mm, Adjustment of slide: 70 mm, Side stock length: 150 mm, Motor HP-KW/RPM: 18.5 KW/1470 RPM,
284	ID MI6277 Make Milap Model YOM 2009-2010 Condition Good Condition Photo See Photo H frame body, Capacity: 250 ton, Area of bolster: 850 x 900 mm, Distance between bed and ram: 550 mm, Adjustment of slide: 70 mm, Side stock length: 150 mm, Motor HP - KW/RPM: 18.5 KW/1470 RPM
285	ID MI6276 Make Mankoo India Pvt Ltd Model YOM 20092010 Condition Good Condition Photo See Photo H frame body, Capacity: 80 ton, Area of bolster/bed size: 570 x 630 mm, Distance between bed and ram: 375 mm, Adjustment of slide: 30 mm, Stock length: 100 mm, Motor HP/RPM: 7.5 HP/1440 RPM,
286	ID MI6272 Make Sekhon Industries Model YOM 2009/10 Condition Good Condition Photo See Photo H frame body Capacity: 75 ton, Area of bolster /Bed size: 535 mm x 560 mm, Bed to ram: 350 mm, Adjustment of slide: 30 mm, Stock length: 100 mm, Motor HP/RPM: 7.5 HP/1440 RPM.
287	ID MI6270 Make Smeral,Czech Model YOM 2008/09 Condition Good Condition Photo See Photo Capacity: 315 ton, Stroke: 200 mm, Bed size: 1380 x 950 mm, Shut height: 600 mm, Adjustment: 140 mm, Motor HP-KW/RPM: 30 HP, No. of stroke: 44 /min.
288	ID MA28219 Make Danly Model S2-800-60-48 YOM New 1956 Condition Disassembled Photo See Photo Capacity : 800 ton, Bed siz : 1500 x 1200 mm, Stroke : 500 mm, Shut Height : 1200 mm, Adjustment : 250 mm, Speed : 14 SPM, Cushion : 6 Ton x 8” Stroke, Approximate Weight : 150,000 lbs, Air Clutch & Brake, Air Counter Balance, Tie Rod Frame, T-Slotted Bolster, 8 Point Gibs.
289	ID MA28211 Make TMP Voronezh Russia Model KB2535 YOM 1986/1987 Condition Good Condition Photo See Photo Capacity 315 tons, ram stroke 400 mm, Number of ram strokes per minute 20, Shut height 570 mm, Bolster plate to ram adjustment stroke 140 mm, Bed dimensions 1,000 x 1,000 mm, Ram dimensions 800 x 800 mm, Bolster plate thickness 140 mm, main drive motor power 40 kw, Overall dimensions floor space : 3,410 x 3,140 mm, Height above floor level 5,940 mm, weight approx. 30 tons.
290	ID MA28206 Make TMP Voronezh Russia Model K2535A YOM 1969 Condition Good working condition Photo See Photo 315 tons, Slide stroke 400 mm, Slide strokes per min 16, Shut height SDAU 710 mm, Adjustment 140 mm, Bolster dia 1000 x 1000 mm, Slide dim 800 x 800 mm. Main-drive electric motor power 40 kW.
291	ID MA28172 Make TMP Voronezh Russia Model K2538 YOM 1969 Condition Complete ,good working condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
292	ID MA28155 Make TMP Voronezh Russia Model KA9536 YOM Condition Good working condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons.
293	ID MA28153 Make Russian Model K2330B YOM Condition Good Condition Photo See Photo Capacity : 100 ton, Slide stroke most : 130 mm, Slide stroke least : 25 mm, Table size : 850 x 560 mm, The number of courses of a slider continuous : 90 min, Distance from the axis of the slide to the frame (departure ) : 320 mm, Maximum distance between table and slider in its lower position at the greatest progress : 400 mm, Adjusting the distance between table and slider : 100 mm, The thickness of the bolster : 100 mm, Slide dimensions left to right : 400 mm, Slide dimensions front-to- back : 405 mm, Press overall dimensions : 1870 x 2385 x 3000 mm, Press weight : 9015 kg.
294	ID MA28149 Make WMW Erfurt,Germany Model PKZe800/1250 YOM Condition Good working condition Photo See Photo Capacity: 800 ton, slide stroke: 400 mm, Slide adjustment: 185 mm, max shut height between bolster bolster plate and slide (stroke down,adjustment up): 630 mm, Bed area: 1250 x 1650 mm, Main motor: 55 kW, Stroke per minute: 1, Cushion force: 125 ton, Cushion stroke: 160 mm.
295	ID MA28139 Make Zdas Model LU400 YOM New in 1977 Condition Under power Photo See Photo Capacity : 400 ton, Table size : 1200 mm x 1000 mm, Stroke : 250 mm, Stroke per minutes : 20, Dimensions : 2785 x 3020 x 5430 mm, Weight : 28325 kg.
296	ID MA28137 Make WMW Erfurt,Germany Model PKZE1250 YOM 1987 Condition Good Condition Photo See Photo Capacity : 1250 tons, Slide stroke : 500 mm, Slide adjustment : 215 mm, Maximum shut height between bolster plate and slide (stroke down, adjustment up) : 860 mm, Bed area (width x depth) : 1800 x 1650 mm, Slide area (width x depth) : 1300 x 1400 mm, Opening in the bed (width x depth) : 1100 x 1100 mm, Main motor rating : 90 kW, Min number of no-load stroke : 8, Cushion force in the bolster : 2000 kN, Cushion stroke : 200 mm, Height above floor : 7900 mm, Press weight : 130 tons.
297	ID MA28034 Make TMP Voronezh Russia Model KB9538 YOM 1983 / 1988 Condition Good Condition Photo See Photo Capacity : 630 tons, Ram stroke : 400 mm, Number of ram strokes rate per minute : 20, Shut height : 570 mm, Bolster plate-to-ram adjustment stroke : 180 mm, Bed dimensions : 1,250 x 1,250 mm, Bed opening dimensions : 800 x 800 mm, Ram dimensions : 1000 x 1000 mm, Bolster plate thickness : 180 mm, Main drive motor power : 61 kw, Overall dimensions : 3600 x 3470 x 6190 mm, Mass : 49.8 tons.
298	ID MA27970 Make TMP Voronezh Russia Model K2540 YOM 1980 Condition Good Condition Photo See Photo Capacity : 1000 ton, Slider stroke: 400 mm, Number of strokes per min: 20 min, Distance between slider and table:950 mm, Main drive power:100 kW, Dimensions: 3800 x 4180 x 6950 mm. Number of single turn: 15, Table: 1500 x 1500 mm, The closed height: 730 mm, Press weight: around 80 ton, Electrical part needs retrofitting.
299	ID MA27938 Make Ravne,Germany Model DE315 YOM 1990 Condition Good Condition Photo See Photo Capacity: 315 tons, The value of continuous stroke per minute: 18, Slide stroke: 400 mm, Adjustment the slider: 250 mm, Distance between table and slider: 700 mm, Table size: 2500 x 1400 mm, Extendable table (lateral externsion)
300	ID MA27894 Make TMP Voronezh Russia Model KB2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
301	ID MA27893 Make TMP Voronezh Russia Model KB9534 YOM 1965 Condition Good Condition Photo See Photo Capacity : 250 ton, Ram stroke : 320 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
302	ID MA27889 Make TMP Voronezh Russia Model KB2536 YOM 1984 Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
303	ID MI6199 Make Hordern Mason and Edwards Model YOM Condition Good Condition Photo See Photo Press 1 Capacity - 150 Ton, Table Size - 1000 x 1070 mm (Bottom) & 500 x 900 mm (Top), Total Weight of the Machine- Approximate 10 Ton. Press 2 Capacity - 150 Ton, Table Size - 1000 x 1000 mm (Bottom) & 500 x 900 mm (Top), Total Weight of the Machine- Approximate 10 Ton, 2 con rod.
304	ID MA27821 Make TMP Voronezh Russia Model 504012335 YOM 1980 Condition Good Condition Photo See Photo Capacity : 315 ton, Ram stroke : 250 mm, No of stroke minute : 10 spm, Shut height : 860 mm, Adjustment : 100 mm, Double conrod wide ram.
305	ID MA27811 Make Russian Model KD2126 YOM Condition Good Condition Photo See Photo Capacity : 40 tons, Ram stroke : 10- 90 mm, Number of ram strokes per minute : 160, Shut height : 300 mm, Bed to ram adjustment stroke : 65 mm, Ram axis to frame distance (overhang) : 220 mm, Bed dimensions : 600 x 400 mm, Bed opening dimensions : 300 x 200 mm, Ram dimensions : 400 x 285 mm, Bolster plate thickness : 80 mm, Main drive motor power : 4.5 kw, Overall dimensions of press : floor space 1305 x 1380 mm, Height above floor level : 2680 mm, Weight : 3.3 t. Qty : 3 nos.
306	ID MA27800 Make TMP Voronezh Russia Model KB2540 YOM Condition excellent working condition Photo See Photo Capacity : 1000 tons, Ram stroke : 400 mm, No. of strokes : 20 per min., Bed size : 1250 x 1250 mm, Shut height : 730 mm, Bolster plate to ram adjustment stroke : 200 mm, Ram dimensions : 1200 x 1200 mm, Bolster plate thickness : 260 mm, Overall dimensions : 4310 x 3820 x 6575 mm, Main drive motor power : 75 kw, Cushion capacity : 250 ton, Cushion stroke : 70 mm, Weight : 77.1 tons.
307	ID MI6192 Make Mauser Model YOM Condition Good Condition Photo See Photo Capacity: 200 ton, Bed size: 1600 x 1250 mm, With die cushion, Stroke: 150 mm, Day light: 650 mm, Weight of the machine: 23 ton, C frame.
308	ID MA27789 Make Smeral,Czech Model LE250C YOM 1978 Condition Good Condition Photo See Photo Capacity: 250 ton, Table: 1120 x 805 mm, Clutch: electro pneumatic clutch brake combination, Activation of clutch: 2 hand, Stroke: 30-140 mm, Ram: 800 x 475 mm, Motor: 22,0 kW, Length: 1.350 mm, Width: 2.580 mm, Height: 2.975 mm, Weight: 12.880 kg
309	ID MA27784 Make TMP Voronezh Russia Model K2538 YOM 1974 Condition Good Condition ,Not under power Photo See Photo Capacity : 630 tons , Ram stroke : 320 mm, Stroke per minute : 20 SPM, Shut height : 620 mm, Bolster plate to ram adjustment stroke : 180 mm, Bed dimensions : 1250 x 1250 mm, Ram dimensions : 1000 x 1000 mm, Bolster plate thickness : 180 mm, Main drive motor power : 61 kW, Overall dimensions : 3600 x 3470 x 6190 mm, Mass : 49.6 tons.
310	ID MA27755 Make TMP Voronezh Russia Model KB9542 YOM 1991 Condition Excellent Photo See Photo Capacity : 1600 tons, Slide stroke : 630 mm, Slide stroke to the extreme bottom position where the press develops its rated capacity : 7 mm, Number of continous strokes per min : 16, Max. number of single strokes per min : 12, Max. distance between bolster plate and slide : 810 mm, Adjustment : 220 mm, Table (bolster plate) dimensions :- Left to right : 1600 mm, Front to back : 1600 mm, Slide dimensions :- Left to right : 1600 mm, Front to back : 1600 mm, Window in upright dimensions :- Left to right : 1650 mm, Height : 1550 mm, Main motor : 110 kW, Dimensions :- Length : 4670 mm, Width : 4670 mm, Height above floor level : 8110 mm, Machine weight : 140000 kg. Moving bolster.
311	ID MA27750 Make Russian Model KB2132 YOM Condition Good Condition Photo See Photo 160 tons , Slide stroke 25- 160 mm , № of strokes per minute 71 , Shut height on Bolster, "SDAU" 370 mm , Slide adjustment 120 mm , Bed & Bolster area left-right 1000 mm, front-back 670 mm, Bolster thickness 110 mm, Slide Area left-right 460 mmm front-back 580 mm, Motor 16 HP, Overall dimensions 2340 x 2100 x 3700 mm , Weight 13 tons.
312	ID MA27748 Make TMP Voronezh Russia Model K9542 YOM 1978 Condition Good Condition Photo See Photo  |  See Video 1600 tons , ram stroke 630 mm , 16 ram strokes/min , shut height 810 mm , bolster plate to ram adjustment stroke 220 mm , bed dimensions 1600 x 1600 mm , bed opening dimensions 1000 x 1000 mm , ram dimensions 1600 x 1600 mm , bolster plate thickness 650 mm , main drive motor power 110 kW , overall dimensions 4670 x 4670 x 8110 mm , mass 139.8 tons
313	ID MA27738 Make TMP Voronezh Russia Model KA9542 YOM 1986/1988 Condition Good condition,under power Photo See Photo 1600 tons , ram stroke 630 mm , 16 ram strokes/min , shut height 810 mm , bolster plate to ram adjustment stroke 220 mm , bed dimensions 1600 x 1600 mm , bed opening dimensions 1000 x 1000 mm , ram dimensions 1600 x 1600 mm , bolster plate thickness 650 mm , main drive motor power 110 kW , overall dimensions 4670 x 4670 x 8110 mm , mass 139.8 tons
314	ID MA27730 Make TMP Voronezh Russia Model KA9536 YOM 1977 Condition Good working condition Photo See Photo Capacity : 400 tons, Ram stroke : 400 mm, No. of strokes : 25 per min., Shut height : 470 mm, Bolster plate to ram adjustment stroke : 160 mm, Bed dimensions : 1000 x 1000 mm, Bed opening dimensions : 630 x 630 mm, Ram dimensions : 800 x 800 mm, Bolster plate thickness : 160 mm, Main drive motor power : 40 kW, Overall dimensions : floor space 3410 x 3140 mm, Height above floor level : 5940 mm, Mass approx. : 36 tons.
315	ID MA27621 Make TMP Voronezh Russia Model K2538 YOM 1983 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
316	ID MA27592 Make TMP Voronezh Russia Model K9540 YOM Condition Good Condition Photo See Photo Capacity : 1000 ton, Ram stroke : 500 mm, Number of ram strokes rate per minute : 20, Shut height : 680 mm, Bolster plate to ram adjustment stroke : 200 mm, Bed dimensions : 1250 x 1250 mm, Bed opening dimensions : 1000 x 1000 mm, Ram dimensions : 1250 x 1250 mm, Bolster plate thickness : 260 mm, Main drive motor power : 75 kW, Overall dimensions : floor space 4310 x 3820 mm, Height above floor level : 6790 mm, Weight of machine : 79.5 t.
317	ID MA27579 Make WMW Erfurt,Germany Model PKZ400 YOM 1970 Condition Good working condition Photo See Photo 400 tons,ram stroke 315 mm,no. of strokes 18 per min.,table size 1000 x 1320 mm, adjustment of ram 200 mm,shut height 525 mm, distance between columns 1000 mm, ram size 800 x 1060 mm, bore in table 650 x 650 mm,capacity of die cushion 63 tons,travel of plate of cushion 125 mm, motor power 32 kW,dimensions: 6300 x 2520 x 2670 mm, weight 33.8 tons .
318	ID MA27566 Make AIDA,Japan Model TP110C YOM 1986 Condition Good working condition Photo See Photo Stroke : 200 mm, Die height : 390 mm, Bolster : 1100 x 700 mm, Capacity : 110 ton.
319	ID MA27561 Make TMP Voronezh Russia Model YOM 1989 Condition Good working condition Photo See Photo  |  See Video Capacity : 160 ton, Ram Stroke : 190 mm, Stroke per minute : 30 min, Shut height : 700 mm, Table size : 1100 x 750 mm, Weight of machine : 12 t.
320	ID MI6167 Make TMP Voronezh Russia Model KA2536 YOM 1988 Condition Reconditioned Photo See Photo Capacity : 400 ton, Slide stroke : 250 mm, Number of strokes : 32/1 min, Distance between bolster plate and slide : 510 mm, Shut height : 670 mm, Regulation of slide : 160 mm, Slide surface : 800 x 800 mm, Table size : 1000 x 1000 mm, Main motor : 40 kW, Dimension :- lenght : 3470 mm, width : 3140 mm, height : 5940 mm, Die Cushion Original with machine. Machine all mechanical work done for ready to use. Main panel Ready (wiring change) . Motor is rewind as per IS. Connecting & all Bushes in PB2 are new. Only field wiring, encoder or cam box and PLC has to be fitted.
321	ID MA27505 Make WMW Erfurt,Germany Model PKZ400 YOM 1979 Condition Good Condition Photo See Photo Capacity : 400 tons, Ram stroke : 315 mm, No. of strokes : 18 per min, Table size : 1000 x 1320 mm, Adjustment of ram : 200 mm, Shut height : 525 mm, Distance between columns : 1000 mm, Ram size : 800 x 1060 mm, Bore in table : 650 x 650 mm, Capacity of die cushion : 63 tons, Travel of plate of cushion : 125 mm, Motor power : 32 kW, Dimensions : 6300 x 2520 x 2670 mm, Weight : 33.8 tons .
322	ID MA27454 Make TMP Voronezh Russia Model K2538 YOM 1980 Condition Dismantled,Good condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
323	ID MA27433 Make Smeral,Czech Model LDO315 YOM 1980 Condition Good working condition Photo See Photo Two point single action crank press Capacity: 315 ton, Number of ram strokes: 44 spm, Ram stroke: 200 mm, Single stroke; 20 mm, Ram adjustment: 20 mm, Clear width between uprights; 1380 mm, Shut height: 600 mm, working surface of bed: 1380 x 950 mm, Working surface of ram: 1380 x 950 mm, Output of main motor; 30 kw, Dimensions: 2510 x 2450 x 4800 mm, Weight of the machine: 27.300 kg.
324	ID MA27380 Make AIDA,Japan Model PDC20 YOM Condition Good Condition Photo See Photo Capacity : 200 ton, Ram Stroke : 250 mm, Ram size : 1830 x 650 mm, Adjustment : 105 mm, Shut Height : 510 mm, No of strokes / min : 20-40, Table dimensions : 2400 x 800 mm, Motor Power : 15 kW, Overall dimensions :- Width : 1850 mm, Lenght : 2534 mm, Height : 3640 mm, Weight : 32000 kg.
325	ID MA27265 Make Wilkins & Mitchell Model E48-1-16 YOM Condition Good Condition Photo See Photo Maximum Capacity : 250 t, Ram stroke : 405 mm, Distance between uprights : 1230 mm, Table area : 1220 x 915 mm, Ram surface : 1220 x 915 mm, Distance between table and ram : 550 mm, Working speed : 15 coups, Motor : 30 cv, Dimensions of machine : 2600 x 2000 x 5300 mm, Approximate Weight : 32000 kg. Accessories :- Capacity : 35 ton, Stroke : 205 mm, Bottom ejector.
326	ID MA27264 Make Wilkins & Mitchell Model S1-300-48-48 YOM Condition Good Condition Photo See Photo Capacity : 300 ton, Stroke : 305 mm, Ram adjustment : 125 mm, Working speed : 18 mn, Distance between uprights : 1230 mm, Table area : 1220 x 1220 mm, Ram surface : 1220 x 1220 mm, Distance between table and ram : 380/685 mm, Motor : 35 cv, Dimensions of machine : 3000 x 2600 x 7000 mm, Weight of machine : 30000 kg. Accessories :- Bottom ejector, capacity : 45 ton, stroke : 150 mm.
327	ID MA27252 Make Russian Model KG2132 YOM Condition Good Condition Photo See Photo 160 tons , Slide stroke 25- 160 mm , № of strokes per minute 71 , Shut height on Bolster, "SDAU" 370 mm , Slide adjustment 120 mm , Bed & Bolster area left-right 1000 mm, front-back 670 mm, Bolster thickness 110 mm, Slide Area left-right 460 mmm front-back 580 mm, Motor 16 HP, Overall dimensions 2340 x 2100 x 3700 mm , Weight 13 tons.
328	ID MA27244 Make WMW Erfurt,Germany Model PKZE500 YOM Condition Good Condition Photo See Photo Capacity : 500 tons, Ram Stroke : 400 mm, Ram Adjustment : 220 mm, No. of Strokes/min : 12, Shut Height : 675 mm, Distance between columns : 1000 mm, Table Size : 1000 x 1400 mm, Ram Size : 800 x 1120 mm, Bore in Table : 710 x 710 mm, Main Motor : 39 KW, Die Cushion capacity : 80 tons, Ejector power of cushion : 12.5 Mp, Stroke of ejector : 180 mm, Die Cushion Stroke : 160 mm, Height from floor : 6200 mm, Press Weight : 43 tons approx.
329	ID MA27222 Make Russian Model KE2130A YOM Condition Good Condition Photo See Photo 100 tons, ram stroke 10-130mm, number of ram strokes per minute 95 or 72, shut height 400mm, bed to ram adjustment stroke 100mm, ram axis to frame distance (overhang) 340mm, bed dimensions 950 x 630mm, bed opening dimenions 420 x 280mm,ram dimensions 680 x 600mm, bolster plate thickness 100mm, main drive motor power 14.5kw, overall dimenions of press : floor space 970 x 2380mm, height above floor level 2660mm, mass 9.5t.
330	ID MA27212 Make Russian Model KB2132 YOM Condition Good Condition Photo See Photo 160 tons , Slide stroke 25- 160 mm , № of strokes per minute 71 , Shut height on Bolster, "SDAU" 370 mm , Slide adjustment 120 mm , Bed & Bolster area left-right 1000 mm, front-back 670 mm, Bolster thickness 110 mm, Slide Area left-right 460 mmm front-back 580 mm, Motor 16 HP, Overall dimensions 2340 x 2100 x 3700 mm , Weight 13 tons.
331	ID MA27201 Make Russian Model KE2130A YOM 1983 Condition Good Condition Photo See Photo 100 tons, ram stroke 10-130mm, number of ram strokes per minute 95 or 72, shut height 400mm, bed to ram adjustment stroke 100mm, ram axis to frame distance (overhang) 340mm, bed dimensions 950 x 630mm, bed opening dimenions 420 x 280mm,ram dimensions 680 x 600mm, bolster plate thickness 100mm, main drive motor power 14.5kw, overall dimenions of press : floor space 970 x 2380mm, height above floor level 2660mm, mass 9.5t
332	ID MI6108 Make WMW Erfurt,Germany Model PKZE800 YOM 1987 Condition Dismantled,Good condition Photo See Photo Capacity : 800 tons, Ram stroke : 400 mm, Ram adjustment : 185 mm, Shut heighgt : 630 mm, Distance between columns : 1250 mm, Table size : 1250 x 1650 mm, Ram size : 1000 x 1250 mm, Bolster thickness : 220 m, Main motor power : 55 kW, Press weight : 77 tons.
333	ID MA27185 Make TMP Voronezh Russia Model KA9536 YOM Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 36 tons.
334	ID MA27123 Make TMP Voronezh Russia Model K9538 YOM 1983,1984,1989 Condition Good Condition Photo See Photo 630 tons, ram stroke 400 mm, number of ram strokes rate per minute 20, shut height 570 mm, bolster plate-to-ram adjustment stroke 180 mm, bed dimensions 1,250 x 1,250, bed opening dimensions 800 x 800 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kw,overall dimensions 3600 x 3470 x 6190 mm, mass 49.8 tons, Quantity : 3 nos
335	ID MI6100 Make Weingarten Model YOM Condition Good Condition Photo See Photo Capacity : 160 ton, Throat : 480 mm, Stroke : 180 mm, No. of strokes : 25-70/min, Distance table /ram,max.stroke up,adjustment up : 550 mm, Table surface area : 110 x 900 mm, Table height over floor : 900 mm, Passage to the back : 700 mm, Ram surface : 900 x 600 mm, Ram adjustment : 144 mm.
336	ID MA27111 Make TMP Voronezh Russia Model KG2538.01 YOM 1987 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons, with moving bolster.
337	ID MA27099 Make TMP Voronezh Russia Model KB9538 YOM Condition Good Condition Photo See Photo 630 tons, ram stroke 400 mm, number of ram strokes rate per minute 20, shut height 570 mm, bolster plate-to-ram adjustment stroke 180mm, bed dimensions 1,250x1,250, bed opening dimensions 800x800mm, ram dimensions 1000x1000 mm, bolster plate thickness 180mm, main drive motor power 61 kw,overall dimensions 3600x3470x6190 mm, mass 49.8 tons.
338	ID MA27095 Make TMP Voronezh Russia Model K9538 YOM 1977 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
339	ID MA27083 Make Bret Model PA32 YOM Condition Good Condition Photo See Photo Capacity : 320 ton, Ram Stroke : 300 mm, Table size : 800 x 1300 mm, Ram size : 500 x 800 mm, Shut height : 800 mm, Distance between column : 1440 mm, H.O.F : 550 mm, Adjustment of table : 6 mm, Dimension of machine : 500 AV/AR x 800 Ht.
340	ID MA27078 Make WMW Erfurt,Germany Model PKZE1250 YOM 1984/1980 Condition Excellent condition,under power Photo See Photo Capacity : 1250 tons, Slide stroke : 500 mm, Slide adjustment : 215 mm, Maximum shut height between bolster plate and slide (stroke down, adjustment up) : 860 mm, Bed area (width x depth) : 1800 x 1650 mm, Slide area (width x depth) : 1300 x 1400 mm, Opening in the bed (width x depth) : 1100 x 1100 mm, Main motor rating : 90 kW, Min number of no-load stroke : 8, Cushion force in the bolster : 2000 kN, Cushion stroke : 200 mm, Height above floor : 7900 mm, Press weight : 130 tons.
341	ID MA27075 Make Krupp Model PDOq2-300 YOM Condition Good Condition Photo See Photo Press Capacity : 300 ton, Drive capacity : 38 kW, Stroke : 350 mm Stroke rate : 28 min-1, Shut height : 550 mm, Table size (left to right) : 1610 mm, Table size (front to back) : 900 mm, Ram (left to right) : 1840 mm, Ram (front to back) : 800 mm, Ram adjustment : 100 mm, Weight of machine : 36 t.
342	ID MA27061 Make WMW Erfurt,Germany Model PEZZ400 YOM Condition Good Condition Photo See Photo Nominal capacity : 400 t, Stroke : 200 mm, Number of strokes : 40/min, Shut height : 630 mm, Adjustment : 160 mm, Bed : 1600 x 1250 mm, Ram : 1400 x 1000 mm, Main motor : 32 kW, Height above floor : 4450 mm, Weight of machine : 31 tons. Double con rod.
343	ID MA27043 Make Weingarten Model ARP125 YOM 1984 Condition Good Condition Photo See Photo Pressure : 125 ton, Stroke : 20-140 mm, Stroke per minute : 55 min -1, Ram adjustment : 90 mm, Throat : 420 mm, Ejector stroke : 64 mm, Table surface : 1060 x 730 mm, Ram surface : 800 x 500 mm, Daylight : 425 mm, Motor power requirement : 15,0 kW, Weight : 9800 kg.
344	ID MA27003 Make TMP Voronezh Russia Model KA9536 YOM 1984 Condition Good working condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 36 tons.
345	ID MA26972 Make Komatsu Model OBS80-3 YOM 1992 Condition Good Condition Photo See Photo Press Capacity : 80 ton, Stroke length : 130 mm, Stroke per minute : 37~75 spm, Slide area : 550 x 450 mm, Bolster area : 1000 x 600 mm, Die height : 350 mm, Slide adjustment : 80 mm, Frame type C, Material of frame steel.
346	ID MA26970 Make Komatsu Model OBS80-2 YOM 1987 Condition Good Condition Photo See Photo Press Capacity : 80 ton, Stroke length : 160 mm, Stroke per minute : 37~75 spm, Slide area : 550 x 450 mm, Bolster area : 1000 x 600 mm, Die Height : 335 mm, Slide adjustment : 80 mm, Frame type C, Material of frame steel.
347	ID MA26963 Make WMW Erfurt,Germany Model PKZE1250 YOM 1980 Condition Good Condition Photo See Photo Capacity : 1250 tons, Slide stroke : 500 mm, Slide adjustment : 215 mm, Maximum shut height between bolster plate and slide (stroke down, adjustment up) : 860 mm, Bed area (width x depth) : 1800 x 1650 mm, Slide area (width x depth) : 1300 x 1400 mm, Opening in the bed (width x depth) : 1100 x 1100 mm, Main motor rating : 90 kW, Min number of no-load stroke : 8, Cushion force in the bolster : 2000 kN, Cushion stroke : 200 mm, Height above floor : 7900 mm, Press weight : 130 tons.
348	ID MA26832 Make TMP Voronezh Russia Model KG9534 YOM 1990 Retrofit 2013 Condition Excellent Photo See Photo Capacity 250 tons, bed size 800 x 800 mm, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening dimensions 500 x 500 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons.
349	ID MA26827 Make TMP Voronezh Russia Model KA9534 YOM 1979 Condition Good Condition Photo See Photo Capacity : 250 ton, Ram stroke : 320 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
350	ID MA26731 Make TMP Voronezh Russia Model KA9536 YOM 1991 Condition Good working condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 36 tons.
351	ID MI6022 Make TMP Voronezh Russia Model K9536 YOM 1977 Condition Reconditioned Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons. With cushion. With new electrical panel. press can be delivered duly painted and installed at your plant.
352	ID MA26681 Make TMP Voronezh Russia Model K2540 YOM Condition Good Condition Photo See Photo Capacity : 1000 ton, Stroke : 400 mm, Stroke per minute : 16 min, Die height : 950 mm, Ram adjustment : 200 mm, Ram dimension : 1250 x 1250 mm, Table dimension : 1500 x 1500 mm, Height of machine : 8600 mm, Bolster plate thickness : 220 mm, Table height above floor level : 400 mm, Main motor : 77/1400 rpm, Dimension of machine : 4180 x 3800 mm, Press weight without hydraulic cushion : 79 t, Press weight with hydraulic cushion : 84 t.
353	ID MA26673 Make TMP Voronezh Russia Model K9538 YOM 1978 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton
354	ID MA26667 Make TMP Voronezh Russia Model KB2535A YOM 1980 Condition Good Condition Photo See Photo Capacity 315 tons, ram stroke 400 mm, Number of ram strokes per minute 20, Shut height 570 mm, Bolster plate to ram adjustment stroke 140 mm, Bed dimensions 1,000 x 1,000 mm, Ram dimensions 800 x 800 mm, Bolster plate thickness 140 mm, main drive motor power 40 kw, Overall dimensions floor space : 3,410 x 3,140 mm, Height above floor level 5,940 mm, weight approx. 30 tons.
355	ID MA26592 Make TMP Voronezh Russia Model K2542 YOM 1974 / 1976 Condition Good working condition Photo See Photo Capacity : 1600 tons , Ram stroke : 400 mm, Stroke per minute : 16, Shut height : 870 mm, Bolster plate to ram adjustment stroke : 220 mm, Bed dimensions : 1600 x 1600 mm, Ram dimensions : 1600 x 1600 mm, Bolster plate thickness : 650 mm, Main drive motor power : 110 kW , Overall dimensions : 4670 x 4670 x 8110 mm, Mass 141.5 tons. Qty : 2 presses.
356	ID MA26587 Make TMP Voronezh Russia Model KB2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
357	ID MI5984 Make Godrej,India Model SE1-1200-1200x1400-1092 YOM 2002 Condition Disassembled Photo See Photo Capacity : 1200 ton, Rating point : 12 mm, Stroke : 400 mm, Slide adjustment : 200 mm, Shut height from bolster : 700 mm, Slide face (FB x LR ) : 1200 x 1200 mm, Clear distance between oil trays : 1300 mm, Height of bolster surface from ground : 900 mm, Size of bolster : 1200 x 1400 mm, Bolster thickness : 260 mm, Speed in continuous mode : 16 spm, Speed in once mode : 8 spm, Available job energy including die cushion : 40000 mkg, Main motor siemens make : 110/1500 kW/rpm, Electric supply : 415+/-5%, 3 phase, 50 Hertz, Air supply pressure : 5.5 bar moisture free air, CBC capacity suitable for top tool weight of 1.5 ton, Air consumption : 1200 min, Hos travel : 20 mm, Cushion pad size : 1000 x 1000 mm. With Hydraulic overload safety.
358	ID MA26576 Make Rovetta,Italy Model POD1600-2500-2200 YOM 1977 Condition Good Condition Photo See Photo Working force : 1600 Ton, Stroke : 800 mm, Max. Height of enclosed press : 1200 mm, Power of engine pumps : 100+4 KM, Traverse speed : 350 mm/sek, Return speed : 250 mm/sec, Working speed : 35 mm/sec, Return power of reverse stroke : 80 T, Eccentricity clearance nominal power : 700 mm, Maximum torque : 1120 Tm, Clearance in stands : 900 mm, Table stroke extension : 2200 mm, Load capacity table : 35 T, The height of the press above the hall level : 6775 mm, The depth of the press at the hall level : 2020 mm, Widht : 6050 mm, Horizontal depth : 3625 mm, Weight of the press : 190 t, Maximum gap between table and slider : 1810 mm, Dimensions of working table : 2500 x 2200 mm, Maximum permissible pressure : 320 bars, The pressure for continuous operation : 240 bars, Maximum efficiency of single-pump : 440 l/minfrom.
359	ID MA26570 Make Erzhong Model EQB YOM Brand New Condition Brand New Photo See Photo Capacity : 1250 ton, Slider Stroke : 500 mm, The distance between the slide block and the lower dead point under nominal pressure : 33 mm, The frequency of the slide block continual travel : 26 min, The maximum frequency of single travel : 6 min, The maximum closing height : 1700 mm, The slide block adjustable value : 200 mm, Working table size Length x Width : 2800 x 1400 mm, Slide block face size Length x Width : 2770 x 1400 mm, Frame internal span : 2800 mm, Main motor, power, rotate speed : 132 kW, 1500 min, Side window Height x Width : 2000 x 500 mm, External dimensions Length x Width : 4140 x 3350 mm, Height above ground : 8000 mm, Air consumption : 38 m/h, Cooling water consumption : 1.5 m/h, Machine Weight : 180000 kg. Qty : 2 nos.
360	ID MA26538 Make TMP Voronezh Russia Model K2540 YOM 1974 Condition Good Condition Photo See Photo Capacity : 1000 ton, Ram stroke : 400 mm, Number of ram strokes per minute : 20 , Shut height : 730 mm, Bolster plate to ram adjustment stroke : 200mm, Bed dimensions : 1,250 x 1,250 mm, Ram dimensions : 1,200 x 1,200 mm, Bolster plate thickness : 260 mm, Main drive motor power : 75 kw, Overall dimensions : Floor space : 4,310 x 3,820 mm, Height above floor level : 6,575, Mass,t,approx : 77.1.
361	ID MA26534 Make TMP Voronezh Russia Model K9536 YOM Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons.
362	ID MA26517 Make WMW Erfurt,Germany Model PKZE1250 YOM 1984 Condition Good Condition Photo See Photo 1250 tons, Slide stroke 500 mm, Slide adjustment 215 mm , Maximum shut height between bolster plate and slide (stroke down, adjustment up) 860 mm , Bed area (width x depth) 1800x1650 mm, Slide area (width x depth) 1300x1400 mm , Opening in the bed (width x depth) 1100x1100 mm , Main motor rating 90 kW , Min number of no-load stroke 8 , Cushion force in the bolster 2000 kN , Cushion stroke 200 mm , Height above floor 7900 mm , Press weight 130 tons. Qty press in line : 4 no.
363	ID MA26379 Make TMP Voronezh Russia Model K9540 YOM Condition Good Condition Photo See Photo 1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t.
364	ID MA26333 Make WMW Erfurt,Germany Model PEEI250/400 YOM 1966 Condition Good working condition Photo See Photo 250 tons, throat 400 mm, hole in the table 160 mm, ram stroke 36  126 mm, number of strokes continuous operation:40 stroke/min, adjustability of ram 110 mm, table area 1000 x 750 mm, ram surface 630 x 500 mm.
365	ID MI5875 Make Ameetep Model PSE200M1 YOM 1997 Condition Good Condition Photo See Photo Force : 200 tons Rating above BDC : 12 mm, Stroke length : 250 mm, No of stroke : 32 min-1, Shut height from bolster : 475 mm, Slide adj motor rised : 100 mm, Slide area (LR x FB) : 600 X 750 mm, Bolster area (LR x FB) : 750 x 900 mm, Bolster thickness : 150 mm, Clear distance between uprights : 800 mm, Opening in uprights ( FB x HT) : 450 x 375 mm, Main motor : 30 x 1500 kW, Slide adj motor : 1.5 x 1000 kW, Electric supply required : 415 V and 50 Hz, Main air pressure : 5.5 bar, Overall size of machine :- Height : 4800 mm, Depth : 2700 mm, Width : 235 mm, Height from floor to top of bolster : 950 mm, Weight of machine : 26.5 tons. Mech. bolster ejector :- Force : 300 kn, Stroke length : 80 mm.
366	ID MA26211 Make WMW Erfurt,Germany Model PKZE500 YOM Condition Good Condition Photo See Photo 500 tons capacity, Ram Stroke 400 mm, Ram Adjustment 220 mm, No. of Strokes/min 12, Shut Height 675 mm, Distance between columns 1000 mm, Table Size 1000 x 1400 mm, Ram Size 800 x 1120 mm, Bore in Table 710 x 710 mm, Main Motor 39 KW, Die Cushion capacity 80 tons, Ejector power of cushion 12.5 Mp, Stroke of ejector 180 mm, Die Cushion Stroke 160 mm, Height from floor 6200 mm, Press Weight 43 tons approx.
367	ID MA26014 Make WMW Erfurt,Germany Model PEDN100 YOM Condition Good Condition Photo See Photo Pressure - 100 kN, Table 900 x 700 mm, Daylight - 435 mm, Strokes -112 per minute, Stroke 16 - 70 mm.
368	ID MA25989 Make TMP Voronezh Russia Model K9536 YOM Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
369	ID MA25988 Make TMP Voronezh Russia Model K2542 YOM Condition Good Condition Photo See Photo 1600 tons , ram stroke 400 mm, 16SPM , shut height 870 mm, bolster plate to ram adjustment stroke 220 mm, bed dimensions 1600 x 1600 mm, ram dimensions 1600 x 1600 mm, bolster plate thickness 650 mm, main drive motor power 110 kW , Cushion capacity - 20 to 350 Tons, Cushion stroke : 250 mm, overall dimensions 4670 x 4670 x 8110 mm, mass 141.5 tons.
370	ID MA25932 Make TMP Voronezh Russia Model KB2540 YOM 1987 Condition Excellent Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons.
371	ID MA25858 Make Spiertz Model YOM Condition Good Condition Photo See Photo Capacity : 500 ton, Stroke per min : 20 , Ram stroke : 300 mm, Table dimensions : 1900 x 1200 mm, Adjustment : 150 mm, Power ejector : 50 ton, Stroke ejector : 160 mm, Weight of press : 69 ton.
372	ID MA25752 Make TMP Voronezh Russia Model KG2540 YOM 1988 Condition Excellent condition,under power Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons.
373	ID MI5836 Make WMW Erfurt,Germany Model PKZ250-800II YOM Condition Good working condition Photo See Photo Capacity : 250 ton, Ram Stroke : 315 mm, Table size : 1180 x 800 mm, Max stroke : 14 min, Idle stroke : 18 min, Drive motor : 28 kW,
374	ID MA25664 Make AIDA,Japan Model RDS20 YOM 1993 Condition Good Condition Photo See Photo  |  See Video Capacity : 200 tons, Ram Stroke : 250 mm, Stroke per minute : 40 min, Shut height : 610 mm, Table size : 2400 x 800 mm, Ram size : 1830 x 650 mm, Adjustment of ram : 105 mm, Dimensions : 2740 x 3165 x 4882 mm, Weight of the machine : 31.6 tons.
375	ID MA25642 Make Strojarne Piesok,Yugoslavia Model LK160 YOM 1990 Condition Good Condition Photo See Photo Capacity : 160 ton, Table size : 710 x 810 mm, Ram size : 670 x 670 mm, Shut height : 560 mm, Ram stroke : 200 mm, Ram stroke per min : 36, Bolster plate to ram adjustment stroke : 120 mm, Bolster plate thickness : 120 mm, Table gap diameter : 320 mm, Ram gap diameter : 65 mm, Main motor power : 18,5 kW, Total power required : 28,5 kW, Press dimensions : 1820 x 1750 x 4200 mm, Press weight : 11900 kg, Quantity : 2 nos.
376	ID MA25493 Make TMP Voronezh Russia Model KA9536 YOM Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
377	ID MA25468 Make TMP Voronezh Russia Model KA9536 YOM 1983 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
378	ID MA25433 Make TMP Voronezh Russia Model KA9536 YOM 1983 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
379	ID MA25411 Make Erzhong Model EQB YOM Condition Brand New Photo See Photo Capacity 8000 tons (Rated Pressure : 8 mn), Slide block travel : 400 mm, The frequency of the slide block continual travel : 30 times/min, The maximum frequency of single travel : 6 times/min, The maximum closing height : 1260 mm, The slide block adjustable value : 175 mm, Working table size, left-right : 2050 mm, Working table size backwards-forwards : 1250 mm, Size of slide block bottom face left-right : 2030 mm, Backwards-forwards : 1160 mm, Frame internal span : 2050 mm, Main motor, power, rotate speed : 75kW, 1500 min, Side window, high : 1260 mm, and wide : 400 mm, External dimensions, left-right : 3020 mm, and backwards-forwards : 2500 mm, Elevation above floor : 6152 mm, Air consumption : 208 m/h, Cooling water consumption : 1.5m/h, Machine Weight : 90000 kg. The electrical system of the Edge trimming machine, Electric motor size and parameter, 1) main motor power 75kw/1463RPM/AC380V 1 set, 2) grease pump motor power0.25kw/AC380V 1 set, 3) slide block adjusting motor power 7.5kw/1460RPM/AC380V 1set. 1) EQB 8MN Edge Trimming machine = Qty : 1 set, Including : Foundation elements, Hydraulic system, Control desk and electric cabinet (Include the cable from the machine to electric cabinet about 15 meters), Control system such as Siemens S7-300, Programming software. 2) Quick wear parts for two years operation = Qty : 1 lot, Including : The scope of supply as per item VI of technical quotation. 3) Installation and commissioning = Including : Erection and commissioning period is about 60 days based on condition of all manufacturing parts, purchased parts, workshop and infrastructure are all ready for erection and commissioning, The price of installation and commissioning include cost of the construction machinery transportation and cost of special tools for contruction, The Buyer will be responsible to supply the lifting facility for lifting the parts during installation, The buyer will provide the necessary contruction condition, such as. a) To assist erection party in the acquisition or lease of scaffolds, springboards and sleepers for installation. b) To provide the oxygen, acetylene, argon and temporary power supply for installation site. c) To provide all erection cranes used in the construction, d) Foundation construction preloading and foundation grouting material for the second time will be responsibility by the buyer. 4) Training and Service = Qty : CNY2,540 man/day. Total 4 persond, 60 days Including : The final price will be calculated by actual man/day. This press is a new machine. It is not the equipment in stock. Press are to be used for the 8000 ton hot forging press.
380	ID MA25389 Make TMP Voronezh Russia Model K2538 YOM 1977 / 1978 Condition Good working condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons. Qty : 2 nos.
381	ID MA25349 Make WMW Erfurt,Germany Model PKZ250 YOM 1982 Condition Good Condition Photo See Photo Nominal pressure force : 250 tons, Ram travel : 315 mm, Ram adjustment : 180 mm, Max. distance between ran and table at adjustment "0" : 870 mm, Table dimensions : Length : 800 mm, Width : 1.170 mm, Thickness : 130 mm, Table hole dimension : dia 350 , Ram dimensions Length : 620 mm, Width : 1000 mm, Filler ram plate dimensions Length : 610 mm, Width : 700 mm, Thickness : 200 mm, Quantity : 2 pieces.
382	ID MA25287 Make Russian Model K2736 YOM 1986 Condition Good Condition Photo See Photo 400 tons , Slide stroke 150 mm No of continuos slide strokes per min 32; 40, Max No of single strokes per min 24; 30, Shut height 600 mm, Adjustment distance between table and slide 15 mm, Table dim : 1000 x 1740 mm, Slide dim ( front to back ) 1250 mm, BDC : 12 mm, Main drive el.motor power 50 kW, Overall dimensions 3130 x 2340 x 4800 mm, Weight 33.1 tons. With Double Con Rod type
383	ID MA25263 Make TMP Voronezh Russia Model KB9536 YOM Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
384	ID MA25261 Make TMP Voronezh Russia Model KB2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
385	ID MA25156 Make Massey,UK Model YOM Condition Good Condition Photo See Photo 200 tons , fixed stroke 205 mm , stroking rate 48 str/min , table area 1270 x 865 mm , ram area 1170 x 710 mm , distance table/ram stroke down 560 mm , adjustment of tools holder 19 mm , motor 20 CV , dimensions 3555 x 1625 mm , height of press over floor 3300 mm , machine weight 15 tons. Straight Side.
386	ID MA25134 Make Bliss Model S1-150 YOM Condition Good Condition Photo See Photo Capacity : 150 ton, Stroke : 400 mm, Daylight (stroke down, adjustment up, with false table) : 600 mm, Stroking rate : 25 min, Motorised adjustment : 250 mm, Table area : 880 x 850 mm, Ram area, False table thickness : 95 mm, Centralized lubricating with oil, Motor, Dimensions of the press : Width : 2000 mm, Depth : 2700 mm, Height (with motor and air tank) : 4900 mm, Weight of the press : 16 ton.
387	ID MA25133 Make Bliss Model S1-150 YOM Condition Good Condition Photo See Photo Capacity : 150 ton, Stroke : 200 mm, Daylight (stroke down, adjustment up, without false table) : 670 mm, Stroking rate : 70 min, Motorised adjustment : 200 mm, Table area : 840 x 890 mm, Ram area : 850 x 800 mm, False table : 840 x 840 mm, Thickness : 85 mm, Distance between uprights : 940 mm, Positive ejection in the ram stroke : 80 mm, Side opening : 560 (L/R) x H 470 mm, Space under the table for a conveyor belt : 810 (L/R) x H 445 mm, Centralized lubricating with oil, Main motor : 18,5 kW, Dimensions of the press :- Width : 2800 mm, Depth : 1770 mm, Height : 4800 mm, Weight of the press : 16 ton.
388	ID MA25130 Make TMP Voronezh Russia Model KA2534 YOM 1979 Condition Good working condition Photo See Photo 250 tons , ram stroke 200 mm, Stroke per minute : 32, shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons.
389	ID MA25090 Make WMW Erfurt,Germany Model PKZ400 YOM Condition Good Condition Photo See Photo Capacity : 400 tons, Ram Stroke : 315 mm, Adjustment of ram : 200 mm, Max Shut height : 525 mm, Distance between columns : 1000 mm, Ram size (width x depth) : 800 x 1060 mm, Table size (width x depth) : 1000 x 1320 mm, Bore in table : 650 x 650 mm, Main motor power : 32 kW, No of stroke : 18, Capacity of die-cushion : 630 kN, Travel of plae of cushion : 125 mm, Approx. height over floor : 6300 mm.
390	ID MA25089 Make WMW Erfurt,Germany Model PKZE500 YOM Condition Good Condition Photo See Photo Capacity : 500 tons, Ram Stroke : 400 mm, Adjustment of ram : 220 mm, Max Shut height : 675 mm, Distance between columns : 1000 mm, Ram size (width x depth) : 800 x 1120 mm, Table size (width x depth) : 1000 x 1400 mm, Bore in table : 710 x 710 mm, Main motor power : 39 kW, No of stroke : 12, Capacity of die-cushion : 800 kN, Travel of plae of cushion : 160 mm, Approx. height over floor : 6200 mm Weight 43 tons approx
391	ID MA25004 Make TMP Voronezh Russia Model KA2534 YOM 1977 Condition Good Condition Photo See Photo 250 tons , ram stroke 200 mm, 32SPM , shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons.
392	ID MA24989 Make TMP Voronezh Russia Model KB9538 YOM Condition Dismantled,Good condition Photo See Photo 630 tons, ram stroke 400 mm, number of ram strokes rate per minute 20, shut height 570 mm, bolster plate-to-ram adjustment stroke 180mm, bed dimensions 1,250x1,250, bed opening dimensions 800x800mm, ram dimensions 1000x1000 mm, bolster plate thickness 180mm, main drive motor power 61 kw,overall dimensions 3600x3470x6190 mm, mass 49.8 tons.
393	ID MA24974 Make TMP Voronezh Russia Model KB2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
394	ID MA24952 Make Mecfond Model YOM Reconditioned 2003 Condition Good Condition Photo See Photo Capacity : 300 ton, N connection rods : 1, Table dimensions : 1000 x 1000 mm, Engage the clutch, Passage between shoulders : 1050 mm, Distance between table ram : 750 mm, Passage between uprights : 600 mm, Stroke per minute : 12, Slide stroke : 200 mm, Ram surface : 1000 x 1000 mm, Ram regulation : 100 mm, New electric system photocells.
395	ID MA24894 Make TMP Voronezh Russia Model KB2536 YOM 1989 Condition Good working condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
396	ID MA24864 Make Valdarno Model VPS1-PR500 YOM 1988 Condition Good Condition Photo See Photo Capacity 500 tons, Ram stroke 200 mm, Strokes min : 25, Adjustment : 100 mm, Distance between column : 1250 mm, Number of strokes : 35 1/min, Table size : 1190x1100 mm Slide size : 1120 x 1080 mm, Electric motor : 380, V : 50 HP, Quantity : 2 nos.
397	ID MA24779 Make Weingarten Model DX630-16-25 YOM 1963 Condition Good Condition Photo See Photo  |  See Video Double Connecting Rod, Capacity : 630 ton, Distance between columns : 1600 mm, Stroke : 250 mm, No of stroke : 20 min, Distance table /ram, max stroke up adjustment up : 950 mm, Table surface area : 1150 x 1200 mm, Pressure of drawing cushion in table : 50 ton, Stroke of drawing cushion in table : 100 mm, Table height over floor : 800 mm, Side window : 620 mm, Ram surface : 1360 x 1200 mm, Ram adjustment : 160 mm, Height over floor : 5,9 m, Height beneath floor : 0,6 m, Power requirement : 32,0 kW, Dimension W x D x H : 3,67 x 2,2 x 6,5 mm, Machine Weight : 59,0 ton. With motor, back gears, air-friction clutch, drawing cushion in table, hydraulic overload protection in ram, motoric ram adjustment, pneumatic ram counterbalance, control cabinet.
398	ID MA24731 Make Russian Model K2232 YOM 1971 Condition Good Condition Photo See Photo Nominal force : 160 tons, Ram Stroke : 25-160 mm, Number of ram stroke per minute : 71, Shut height : 480 mm, Bed-to-ram adjustment stroke : 120 mm, Ram axis-to-frame distance (overhang) : 360 mm, Bed dimensions : 1000 x 670 mm, Ram dimensions : 665 x 560 mm, Main drive motor power : 19.0 kW, Overall dimensions :- Floor space : 2340 x 2100 mm, Height above floor level : 3700 mm, Weight of machine : 13.6 ton.
399	ID MA24506 Make TMP Voronezh Russia Model K2540 YOM Condition Excellent Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 80 tons.
400	ID MA24504 Make Zdas Model LU630 YOM 1971 Condition Good working condition Photo See Photo Pressure 630 tons, table 1130x1400 mm, slide stroke 315 mm, stroke amount 16 per minute, weight 45 ton.
401	ID MA24456 Make WMW Erfurt,Germany Model PKZE500 YOM 1980 Condition Good working condition Photo See Photo 500 tons capacity, Ram Stroke 400 mm, Ram Adjustment 220 mm, No. of Strokes/min 12, Shut Height 675 mm, Distance between columns 1000 mm, Table Size 1000x1400 mm, Ram Size 800x1120 mm, Bore in Table 710x710 mm, Main Motor 39 KW, Die Cushion capacity 80 tons, Ejector power of cushion 12.5 Mp, Stroke of ejector 180 mm, Die Cushion Stroke 160 mm, Height from floor 6200 mm, Press Weight 43 tons approx. Press has die cushion but no hydraulic overload system.
402	ID MA24430 Make WMW Erfurt,Germany Model PKZ250-800II YOM 1981 Condition Good working condition Photo See Photo Capacity 250 Ton, Table overall dimensions: 1180 x 800 mm, Distance between table and slider: 685 mm, Slide adjustment: 180 mm, Deep drawing: 125 mm, Stroke of slide: 315 mm, Slide adjustment: 180 mm, Strokes per Minute: 18, Weight: 24 Ton.
403	ID MA24429 Make WMW Erfurt,Germany Model PKZ400 YOM 1981 Condition Good working condition Photo See Photo 400 tons,ram stroke 315 mm,no. of strokes 18 per min.,table size 1000 x 1320 mm, adjustment of ram 200 mm,shut height 525 mm, distance between columns 1000 mm, ram size 800 x 1060 mm, bore in table 650 x 650 mm,capacity of die cushion 63 tons,travel of plate of cushion 125 mm, motor power 32 kW,dimensions: 6300 x 2520 x 2670 mm, weight 33.8 tons
404	ID MA24370 Make Wilkins & Mitchell Model L66-5-4-10 YOM Condition Photo See Photo Double Connecting Rod, 600 tons , stroke 254 mm , adjustment with wedge area under the ram 10 mm , table area 1650 x 1300 mm , false table thickness 230 mm , dimensions of press 2700 x 2000 x 5700 mm , weight 42 tons.
405	ID MA24368 Make Smeral,Czech Model LDO500 YOM Condition Good Condition Photo See Photo Double Connecting Rods, Capacity 500 tons, Ram stroke 500 mm, Die height (stroke down, adjustment in with false table 210 mm thick) : 700 mm, Motorised adjustment : 300 mm, Table : 2000 x 1590 mm, Ram : 1750 x 1440 mm, Stroking rate : 25 str./min, Balancing, Centralised lubrication system, Dimensions of machine : Width : 4000 mm, Depth : 3000 mm, Height / floor : 6000 mm, Weight of the machine : 75 ton.
406	ID MA24250 Make TMP Voronezh Russia Model KB2534 YOM 1988 Condition Good Condition Photo See Photo 250 tons , ram stroke 200 mm, 32SPM , shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons.
407	ID MA24082 Make WMW Erfurt,Germany Model PKZe800/1250 YOM Condition Good Condition Photo See Photo Capacity 800 tons, ram stroke 400 mm, ram adjustment 185 mm, shut heighgt 630 mm, distance between columns 1250 mm, table size 1250x1650 mm, ram size 1000x1250 mm, bolster thickness 220 m, main motor pwer 55 kW, press weight 77 tons.
408	ID MA23764 Make Smeral,Czech Model LKO500 YOM 1974 Condition Very good condition Photo See Photo Rated deformation force 500 t, Length of working table area 450 mm, Width of working table area 180 mm, Slide stroke 129.5 mm, Main motor output 30 kW, Dimensions l x w x h 4100/3400/2020 mm, Machine weight 47000 kg.
409	ID MA23739 Make Russian Model AKKA3132A YOM 1984 Condition Good working condition Photo See Photo Capacity : 160 ton, Ram Stroke : 250 mm, Number of ram strokes per minute : 40, Shut height : 610 mm, Bed to ram adjustment stroke : 160 mm, Ram axis to frame distance : 535 mm, Distance clear between columns : 1810 mm, Bed dimensions : 2000 x 750 mm, Ram dimensions : 1500 x 630 mm, Bolster plate thickness : 100 mm, Main drive motor power : 22 kW, Overall dimensions :- Floor space : 2940 x 2990 mm, Height above floor level : 4750 mm, Weight of the machine : 26.2 ton.
410	ID MA23445 Make TMP Voronezh Russia Model K274A YOM Condition Good working condition Photo See Photo Capacity : 315 ton, Stroke : 210 mm, 20 s.p.m, Table : 1120 x 1000 mm, Ram : 950 x 800 mm.
411	ID MA23370 Make TMP Voronezh Russia Model KA9538 YOM 1976 Condition Dismantled,Good condition Photo See Photo 630 tons , slide travel 420 mm , quantity of slides motions 20 motions/min , distance between slide and table in its low position in upper regulation position 750 mm , distance regulation between table and slide 180 mm , table diemensions 1250 x 1200 mm , windows dimensions 800 x 800 mm , slides dimensions 1000 x 1000 mm , dimensions of windows in columns 990 x 620 mm , height of window above tables level 140 mm , thickness of stamping plate 180 mm , height of table above floor level 500 mm , weight of stamp hanging to slide 1150 mm , electrical motor of main drive 55kW , 1395 rotations/min , electrical motor of regulation stamping height 3kW , 1420 rotations/min , press dimensions 3200 x 3470 mm , height above floor level 6100 mm , total press height 7150 mm , weight 50 tons.
412	ID MA23318 Make TMP Voronezh Russia Model KB9534 YOM 1990 Condition Good Condition Photo See Photo Capacity : 250 ton, Ram stroke : 320 mm, Ram continuous stroke number in minute : 32, Ram single stroke number in minute : 24, Ram size : 650 x 650 mm, Table size : 800 x 800 mm, Aperture in table : 500 x 500 mm, Max distance between bolster and ram : 390 mm, Adjustment : 140 mm, Bolster size : 850 x 850, Bolster thickness : 140 mm, Main motor : 27 kW, Dimensions - Length : 3260 mm, Width : 2970 mm, Height : 5180 mm, Machine weight : 25800 kg.
413	ID MA23268 Make TMP Voronezh Russia Model KB2535 YOM 1988 Condition Good Condition Photo See Photo 315 tons , Rated capacity at lowest position ( BDC 12 mm, Slide stroke 400 mm, ą of slide strokes per minute 16 Max. shut height, “SDAU” 710 mm, Slide adjustment 140 mm, Table dimensions 1000 x 1000 mm, Bolster thickness 140 mm, Drive total power 40 kW , Overall dimensions 3100 x 3140 x 5770 mm , Weight of the press 40 tons .
414	ID MI5620 Make Massey,UK Model YOM Condition Good Condition Photo See Photo 120 Ton.
415	ID MA23091 Make TMP Voronezh Russia Model KB9534 YOM 1989 Condition Good Condition Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons
416	ID MA23050 Make TMP Voronezh Russia Model KA9538 YOM 1987 Condition Good Condition Photo See Photo 630 tons , slide travel 420 mm , quantity of slides motions 20 motions/min , distance between slide and table in its low position in upper regulation position 750 mm , distance regulation between table and slide 180 mm , table diemensions 1250 x 1200 mm , windows dimensions 800 x 800 mm , slides dimensions 1000 x 1000 mm , dimensions of windows in columns 990 x 620 mm , height of window above tables level 140 mm , thickness of stamping plate 180 mm , height of table above floor level 500 mm , weight of stamp hanging to slide 1150 mm , electrical motor of main drive 55kW , 1395 rotations/min , electrical motor of regulation stamping height 3kW , 1420 rotations/min , press dimensions 3200 x 3470 mm , height above floor level 6100 mm , total press height 7150 mm , weight 50 tons.
417	ID MA23048 Make WMW Erfurt,Germany Model PKZE500 YOM Condition Good Condition Photo See Photo 500 tons capacity, Ram Stroke 400 mm, Ram Adjustment 220 mm, No. of Strokes/min 12, Shut Height 675 mm, Distance between columns 1000 mm, Table Size 1000x1400 mm, Ram Size 800x1120 mm, Bore in Table 710x710 mm, Main Motor 39 KW, Die Cushion capacity 80 tons, Die Cushion Stroke 160 mm, Height from floor 6200 mm, Press Weight 43 tons approx.
418	ID MA23034 Make TMP Voronezh Russia Model KG9534 YOM 1991 Condition Good Condition Photo See Photo 250 tons, bed size 800 x 800 mm, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
419	ID MA22831 Make TMP Voronezh Russia Model K9538 YOM Condition Good working condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
420	ID MA22818 Make Zdas Model LU1000 YOM 1981 Condition Good Condition Photo See Photo 1000 tons , ram stroke 315 tons , shut height 1042 mm, 12 SPM , distance between columns 1250 mm, plate thickness 220 mm, daylight 1200 mm, table size 1600 x 1200 mm, ram size 1200 x 1200 mm, hole in table 900 x 900 mm, main motor power 100 kW, upper ejctor capacity 392 tons , lower ejctor 100 tons , clamping device capacity 125 tons.
421	ID MA22669 Make Russian Model KD1424 YOM 1977 Condition Good Condition Photo See Photo 25 tons, table size 500 x 340 mm no. of stroke 160 /min.
422	ID MA22657 Make TMP Voronezh Russia Model KB2538.01 YOM 1986 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons. with pneumatic cushion.
423	ID MA22635 Make WMW Erfurt,Germany Model PKZE1250 YOM 1987 Condition Dismantled,Good condition Photo See Photo 1250 tons, Slide stroke 500 mm, Slide adjustment 215 mm , Maximum shut height between bolster plate and slide (stroke down, adjustment up) 860 mm , Bed area (width x depth) 1600x1850 mm, Slide area (width x depth) 1300x1400 mm , Opening in the bed (width x depth) 1100x1100 mm , Main motor rating 90 kW , Min number of no-load stroke 8 , Cushion force in the bolster 2000 kN , Cushion stroke 200 mm , Height above floor 7900 mm , Press weight 130 tons. with pneumatic cushion. cushion capacity 200 tons.
424	ID MA22625 Make Russian Model K3732 YOM 1975 Condition Good Condition Photo See Photo 160tons, working area of table 2000 mm x 1250 mm,number of ram strokes (1/min) 45,30,22,output of main motor 23 kW, height of the machine 4490 mm, width of the machine 3125 mm, length of the machine 2035 mm, weight of the machine 30 tons.
425	ID MA22622 Make Russian Model KE2130 YOM Condition Good Condition Photo See Photo 100 tons, ram stroke 10-130mm, number of ram strokes per minute 95 or 72, shut height 400mm, bed to ram adjustment stroke 100mm, ram axis to frame distance (overhang) 340mm, bed dimensions 950 x 630mm, bed opening dimenions 420 x 280mm,ram dimensions 680 x 600mm, bolster plate thickness 100mm, main drive motor power 14.5kw, overall dimenions of press : floor space 970 x 2380mm, height above floor level 2660mm, mass 9.5t
426	ID MA22582 Make Korea Model YOM Condition Brand New Photo See Photo 300 tons , stroke length 350 mm, 35 Stroke Per Min , die height 650 mm, opening height 950 mm, slide adjustment 120 mm, slide area 1170 x 900 mm, die seat 1190 x 1000 mm, side opening 520 x 800 mm, working height 950 mm, air pressure 5kg/㎠, Electric: A.C. 3 PHASE 50Hz, 30kw x 4POLE for main motor , 1.5kw 4POLE for adjusting motor.
427	ID MA22581 Make Korea Model YOM Condition Brand New Photo See Photo 200 tons , stroke length 250 mm, 40 Stroke Per Min , die height 550 mm, opening height 800 mm, slide adjustment 120 mm, slide area 1000 x 800 mm, die seat 1050 x 900 mm, side opening 450 x 750 mm, working height 950 mm, air pressure 5kg/㎠, Electric: A.C. 3 PHASE 50Hz, 22kw x 4POLE for main motor , 1.5kw 4POLE for adjusting motor.
428	ID MA22460 Make Russian Model KB2535 YOM 1987 Condition Good Condition Photo See Photo 315 tons , Rated capacity at lowest position ( BDC 12 mm, Slide stroke 400 mm, ą of slide strokes per minute 16 Max. shut height, “SDAU” 710 mm, Slide adjustment 140 mm, Table dimensions 1000 x 1000 mm, Bolster thickness 140 mm, Drive total power 40 kW , Overall dimensions 3100 x 3140 x 5770 mm , Weight of the press 40 tons .
429	ID MA22368 Make TMP Voronezh Russia Model K2538 YOM 1980 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
430	ID MA22339 Make Russian Model KE2330 YOM Condition Complete ,good working condition Photo See Photo 100 tons.
431	ID MA22301 Make Wilkins & Mitchell Model DF36S18 YOM Condition Good Condition Photo See Photo Capacity 300 t, Fixed stroke 203.2 mm, Stroking rate 30 str/min, Press width 939.8 mm, Ram 914,4 x 914.4 mm, Table 914,4 x 914.4 mm, Dimensons table/ram (stroke down), maxi 457.2 mm, mini 304.8 mm, Motorised adjustment 152,4 mm, Dimensions LR 2000 mm, F/B 2400 mm, Height 4200 mm, Weight 16 t.
432	ID MA22298 Make TMP Voronezh Russia Model K9536 YOM 1979 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
433	ID MA22051 Make Russian Model KG2134 YOM 1991 Condition Good Condition Photo See Photo 250 tons, ram stroke 25-200mm, no of strokes per min 61 or 25, shut height 560mm, bed to ram adjustment stroke 140mm, ram axis to frame distance 400mm, bed size 1120x750mm, ram size 930x730mm, main drive motor power 27 kw, overall dimensions 2500x2700mm, height above floor level 4300mm, mass 21.5 tons.
434	ID MA21875 Make TMP Voronezh Russia Model KG2540 YOM 1984 Condition Good working condition Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons. With front moving bolster
435	ID MA21789 Make TMP Voronezh Russia Model K9540 YOM 1976 Condition dismantled partially Photo See Photo 1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t , with cushion
436	ID MA21766 Make Smeral,Czech Model LDO315A YOM 1986 Condition Good Condition Photo See Photo 315 tons, ram stroke 200 mm, max. distance between table & ram 900 mm, ram adjustment 20 mm, 44 continuous strokes/min,20 strokes/min., distance from table to slides 1400 mm, table size 1380x950 mm, ram size 1250x900 mm, opening in table 520x420 mm, height of press from floor 4800 mm, main motor power 30 kW, press weight 27 tons, working pressure of clutch 4,5 atmospheres, 0,45 MPA, consumption of air pressure 70 Litres per stroke, Dimensions 2300x2350x4900 mm.
437	ID MA21655 Make TMP Voronezh Russia Model KA9536 YOM 1984 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
438	ID MA21629 Make Zdas Model LU250 YOM 1981 Condition Good Condition Photo See Photo 250 tons, table 790 x 940mm, stroke 250mm, weight 16100kg
439	ID MA21623 Make Zdas Model LU630C YOM 1981 Condition Good Condition Photo See Photo pressure 630 ton, table 1130x1400 mm, slide stroke 315 mm, stroke amount 9 per minute ram adjustment 170 mm, main motor 55 kW, weight 46 ton.
440	ID MA21616 Make TMP Voronezh Russia Model K9532 YOM 1965 Condition Good Condition Photo See Photo 160 tons, ram stroke 220 mm, 37 strokes/min, shut height 330 mm, bolster plate to ram adjustment 120 mm, table 710x710 mm, bed dimensions 420x420 mm, bed opening dimensions 560x665 mm, power 10 kw, dimensions 2100x1680x3610 mm, total weight 10.4 tons - 2 machines
441	ID MA21615 Make TMP Voronezh Russia Model KA9534 YOM 1964 Condition Good Condition Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons - 3 machines
442	ID MA21614 Make TMP Voronezh Russia Model K9536 YOM 1965 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
443	ID MA21612 Make TMP Voronezh Russia Model KB9540 YOM 1973 Condition Good Condition Photo See Photo 1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t.
444	ID MA21439 Make Russian Model KB2132 YOM 1987 Condition Good working condition Photo See Photo 160 tons , Slide stroke 25- 160 mm , № of strokes per minute 71 , Shut height on Bolster, "SDAU" 370 mm , Slide adjustment 120 mm , Bed & Bolster area left-right 1000 mm, front-back 670 mm, Bolster thickness 110 mm, Slide Area left-right 460 mmm front-back 580 mm, Motor 16 HP, Overall dimensions 2340 x 2100 x 3700 mm , Weight 13 tons.
445	ID MA21438 Make Smeral,Czech Model LE400C YOM 1988 Condition Good working condition Photo See Photo 400 tons, pressure 400Mp, cam 450mm, distance between ram and table 630mm, ram adjustment to bottom 120mm, 40Stroke Per Min, number of single strokes admitted per minute 20, bed dimensions 1250 x 900mm, bed thickness 140mm, drop of bed 640/460mm dia 450, ram surface diemensions 950 x 560mm, electric motor power 30KW, revolutions of electric motor 14,600/min, total weight 21,00kg.
446	ID MA21437 Make Smeral,Czech Model LE250C YOM 1981 Condition Good working condition Photo See Photo capacity 250 tons, table size 1115x740 mm, Ram size 800x480 mm, Shut height max. 500 mm, Throat depth 390 mm, Clearance hole in the table 560x430 mm, Ram stroke 30-140 mm, Ram adjustment 110 mm, No. of strokes /min 25-45 min-ą, Motor power 22 kW, dimensions 1500x2800x2930 mm, press weight: 12.75 tons.
447	ID MA21323 Make TMP Voronezh Russia Model KV2536 YOM 1987 Condition Complete ,good working condition Photo See Photo 400 tons , ram stroke 250 mm, 25 SPM , shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1100 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
448	ID MA21318 Make TMP Voronezh Russia Model KA9536 YOM 1990 Condition Good working condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
449	ID MA21284 Make Russian Model KD2126E YOM Condition Excellent ,unused Photo See Photo 40 tons, ram stroke 10- 90mm, number of ram strokes per minute 160, shut height 300mm, bed to ram adjustment stroke 65 mm, ram axis to frame distance (overhang) 220mm, bed dimensions 600 x 400mm, bed opening dimenions 300 x 200mm,ram dimensions 400 x 285 mm, bolster plate thickness 80 mm, main drive motor power 4.5 kw, overall dimenions of press : floor space 1305 x 1380mm, height above floor level 2680 mm, mass 3.3 t. INCOMPLETE ELECTRICALS. - 2 nos
450	ID MA20985 Make WMW Erfurt,Germany Model PKZE1250 YOM 1981 Condition Good Condition Photo See Photo 1250 tons, Slide stroke 500 mm, Slide adjustment 215 mm , Maximum shut height between bolster plate and slide (stroke down, adjustment up) 860 mm , Bed area (width x depth) 1600x1850 mm, Slide area (width x depth) 1300x1400 mm , Opening in the bed (width x depth) 1100x1100 mm , Main motor rating 90 kW , Min number of no-load stroke 8 , height above floor 7900 mm , Press weight 130 tons with die cushion
451	ID MA20878 Make Smeral,Czech Model LKO315 YOM 1977 Condition Good Condition Photo See Photo Max. forcing 315t, Max. distance from the slider to the table: 710 mm, Switch to the bottom of the slider: 180 mm, Table Area: 800x1250 mm, Area slider: 1100x600 mm, Number of strokes: 30 stroke / min, Main engine power: 22 kW.
452	ID MA20852 Make Zdas Model LU1000C YOM 1981 Condition Good Condition Photo See Photo Force 1000 ton, stroke 315 mm, daylight 1200 mm, Ram stroke per min 12, Ram adjustment 190 mm, table size 1600 x 1200 mm, ram size 1200 x 1200 mm. Bed size 1250 x 1500 mm, Main motor 110 kW, Weight 71.5 ton.
453	ID MA20816 Make Smeral,Czech Model LKO500 YOM 1972 Condition Reconditioned Photo See Photo 500 tons , Width between guideways 1150 mm, Width between uprights (below guideways)1320 mm, Shut height (stroke down, adjustment up) 550 mm, Stroke of slide 250 mm, Number of strokes 22 per min., Number of utilizable strokes 12 per min., Slide adjustment 140 mm,Clamping area of slide 1120 x 710 mm, Hole in slide dia 55 mm, Clamping area of table 1250 x 1100 mm, Hole in table 1100 x 500 mm, Output of main electromotor 30 kw, Dimensions of press- length x width mm 3100 x 2200 - height 5250 mm, Weight of machine 32,500 kg
454	ID MA20725 Make TMP Voronezh Russia Model KG2538.01 YOM 1988 Condition Dismantled Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons, with moving bolster.
455	ID MA20715 Make Ravne,Germany Model HKS1000 YOM 1983 Condition Good Condition Photo See Photo 1000 tons, 30 Stroke Per Min, ram stroke 300 mm, ram adjustment 150 mm, shut height 630 mm, Table dimensions 1250 x 1650 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons, With Die Cushion & Hydraulic Overload system.
456	ID MA20688 Make TMP Voronezh Russia Model K2538 YOM 1987 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
457	ID MA20640 Make TMP Voronezh Russia Model K2538 YOM 1965 Condition Good working condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
458	ID MA20602 Make TMP Voronezh Russia Model KB9538 YOM 1987 Condition Excellent Photo See Photo 630 tons, ram stroke 400 mm, number of ram strokes rate per minute 20, shut height 570 mm, bolster plate-to-ram adjustment stroke 180mm, bed dimensions 1,250x1,250, bed opening dimensions 800x800mm, ram dimensions 1000x1000 mm, bolster plate thickness 180mm, main drive motor power 61 kw,overall dimensions 3600x3470x6190 mm, mass 49.8 tons.
459	ID MA20572 Make TMP Voronezh Russia Model KB2536 YOM Condition Good Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
460	ID MA20569 Make TMP Voronezh Russia Model KB2540 YOM Condition Good Condition Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons.
461	ID MA20560 Make TMP Voronezh Russia Model KB9536 YOM 1978-82 Condition Good working condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons - 2 nos.
462	ID MA20559 Make TMP Voronezh Russia Model KB9538 YOM 1983 Condition Good Condition Photo See Photo 630 tons, ram stroke 400 mm, number of ram strokes rate per minute 20, shut height 570 mm, bolster plate-to-ram adjustment stroke 180mm, bed dimensions 1,250x1,250, bed opening dimensions 800x800mm, ram dimensions 1000x1000 mm, bolster plate thickness 180mm, main drive motor power 61 kw,overall dimensions 3600x3470x6190 mm, mass 49.8 tons.
463	ID MA20444 Make Smeral,Czech Model LDO315 YOM 1980s Condition Very good condition Photo See Photo Capacity : 315 tons, Stroke per minute 30, Vertical light 530 mm, Slide of the RAM 180 mm, Adjustment 115 mm, Size of the Ram 1100 x 600 mm, Size of the table 1250 x 800 mm, Engine 20 kW.
464	ID MA20426 Make TMP Voronezh Russia Model KB9540 YOM 1988 installed 1990 Condition Dismantled Photo See Photo 1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t.
465	ID MA20363 Make WMW Erfurt,Germany Model PKZE800 YOM 1980s Condition Good Condition Photo See Photo capacity 800 tons, ram stroke 400 mm, ram adjustment 185 mm, shut heighgt 630 mm, distance between columns 1250 mm, table size 1250x1650 mm, ram size 1000x1250 mm, bolster thickness 220 m, main motor pwer 55 kW, press weight 77 tons
466	ID MA20337 Make Ravne,Germany Model HKS630 YOM 1986 Condition Good working condition Photo See Photo 630 tons, ram stroke 300 mm, 30 SPM , ram adjustment 150 mm, shut height 630 mm, plate thickness 150 mm, main motor 45 kW , ram adjustment motor power 4 kW , number of ejectors in table 1 , ejector capacity 43 tons , ejector stroke 155 mm, table size 1000 x 1250 mm, ram size 900 x 1100 mm, press weight 41.1 tons, dimensions: height 6735 mm, width 3100 mm, depth 2200 mm.
467	ID MA20336 Make Ravne,Germany Model HKS400 YOM 1986 Condition Good working condition Photo See Photo 400 tons, 45 Stroke Per Min , ram stroke 300 mm, ram adjustment 150 mm, main motor 37 kW , adjustment ram motor 2,2 kW , cushion in table 45 tons , cushion stroke 150 mm, ram size 850 x 900 mm, table size 1000 x 1100 mm, distance between columns 1050 mm, shut height 580 mm, max height of press from floor 5100 mm, max press weight 35 tons.
468	ID MA20309 Make TMP Voronezh Russia Model K9536 YOM 1978 Condition Complete ,good working condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
469	ID MA20193 Make WMW Erfurt,Germany Model PKZ1250/1600 YOM 1965 Condition Good Condition Photo See Photo capacity 1250 Tons, Stroke 500 mm, Slide Adjustment 250 mm, Shut Height 860 mm, no. of strokes/min. 8, distance between columns 1600 mm, Table Size 1600x1850 mm, Slide Area 1300x1400 mm, main motor 90 kW, Cushion capacity 200 tons & cushion stroke 200 mm, Weight 134 tons.
470	ID MA20024 Make TMP Voronezh Russia Model KB9536 YOM 1982 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons - 2 machines
471	ID MA19848 Make TMP Voronezh Russia Model KA9540 YOM Condition Good Condition Photo See Photo Capacity 1000 T, Stroke 500 mm, Daylight (Stroke down/Adjustment up) (with false table) 900 mm, Stroking rate 17 Str.min, Motorised adjustment 200 mm, Table area 1500 x 1500 mm, Ram area 1250 x 1250 mm, Side openings 1150 x 750 mm, False table thickness: 200 mm, Main Motor 100 kW, Dimensions of the press: 4180 x 3800 mm, Height over the floor: 6910 mm, With 1 rod. Equipped with cushion - capacity 200t, stroke - 200 mm.
472	ID MA19773 Make Smeral,Czech Model LKO500 YOM 1975 Condition Good Condition Photo See Photo 500 tons , Width between guideways 1150 mm, Width between uprights (below guideways)1320 mm, Shut height (stroke down, adjustment up) 550 mm, Stroke of slide 250 mm, Number of strokes 22 per min., Number of utilizable strokes 12 per min., Slide adjustment 140 mm,Clamping area of slide 1120 x 710 mm, Hole in slide dia 55 mm, Clamping area of table 1250 x 1100 mm, Hole in table 1100 x 500 mm, Output of main electromotor 30 kw, Dimensions of press- length x width mm 3100 x 2200 - height 5250 mm, Weight of machine 32,500 kg
473	ID MA19671 Make TMP Voronezh Russia Model KB9536 YOM Condition Dismantled Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
474	ID MA19670 Make TMP Voronezh Russia Model KB2540 YOM Condition New ,Unused Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons.
475	ID MA19661 Make TMP Voronezh Russia Model KB2538.01 YOM 1988 Condition never used Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
476	ID MA19658 Make TMP Voronezh Russia Model K9538 YOM 1982 Condition Complete ,good working condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.with pneumatic cushions -2 machines.
477	ID MA19608 Make TMP Voronezh Russia Model K9538 YOM 1979 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
478	ID MA19339 Make TMP Voronezh Russia Model K9538 YOM 1979 Condition Good working condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
479	ID MA19221 Make Russian Model KB2536 YOM 1988 Condition Good,unused Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
480	ID MA19055 Make Smeral,Czech Model LKO315 YOM 1960/1961 Condition Good Condition Photo See Photo The highest final pressure: 315t, The width of the machine guides: 1250 mm, The largest distance from the slider to the table: 710mm, Switch to the bottom of the slider: 180mm, Table Area: 800x1250mm, Area slider: 1100x600, The hole in the table: 400x900mm, Number of strokes: 30 stroke / min, Main engine: Power: 22 kW, Speed: 1445 rpm, Electric motor conversion of the slider: Power: 2.2 kW, Speed: 1400 rpm. Qty: 3 Nos.
481	ID MA18922 Make TMP Voronezh Russia Model K9536 YOM 1977 Condition Very good condition Photo See Photo Nominal force - 400 Tons, Slider stroke- 400 mm, Strokes per min - 27, Shut height -470 mm, Slider adjustment - 160 mm, Bolster - 1000 x 1000 mm, Thickness of bolster - 160 mm, Slider - 800 x 800 mm, Table hole - 630 x 630 mm, Windows - 700 x 550 mm, Dimensions - 2900x3100x5580 mm, Main motor power - 45 kW, Machine weight - 35 000 kg.
482	ID MA18917 Make TMP Voronezh Russia Model K2542 YOM 1967 Condition Good working condition Photo See Photo 1600 tons , ram stroke 400 mm, 16SPM , shut height 870 mm, bolster plate to ram adjustment stroke 220 mm, bed dimensions 1600 x 1600 mm, ram dimensions 1600 x 1600 mm, bolster plate thickness 650 mm, main drive motor power 110 kW , Cushion capacity - 20 to 350 Tons, Cushion stroke : 250 mm, overall dimensions 4670 x 4670 x 8110 mm, mass 141.5 tons.
483	ID MA18589 Make TMP Voronezh Russia Model KB2536 YOM Condition Excellent ,unused Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
484	ID MA18515 Make WMW Erfurt,Germany Model PKZE1250 YOM 1972 Condition Complete,very good condition Photo See Photo 1250 tons, Slide stroke 500 mm, Slide adjustment 215 mm , Maximum shut height between bolster plate and slide (stroke down, adjustment up) 860 mm , Bed area (width x depth) 1600x1850 mm, Slide area (width x depth) 1300x1400 mm , Opening in the bed (width x depth) 1100x1100 mm , Main motor rating 90 kW , Min number of no-load stroke 8 , Cushion force in the bolster 2000 kN , Cushion stroke 200 mm , Height above floor 7900 mm , Press weight 130 tons.
485	ID MA18476 Make Smeral,Czech Model LUC500 YOM 1989 OH 2007 Condition Excellent condition,under power Photo See Photo 500 tons , Table 2800x1800 mm.
486	ID MA18417 Make TMP Voronezh Russia Model KB2540 YOM 1989 Condition Good Condition Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons.
487	ID MA18395 Make Manyo,Japan Model MTP300-300S YOM Condition Good Condition Photo See Photo 300 tons, Stroke 300mm, 45spm Die Height 900mm Ram adjustment 50mm
488	ID MA18353 Make Wilkins & Mitchell Model D48S4-8 YOM Rebuilt 2009 Condition Reconditioned Photo See Photo 200 Tons, Slide Stroke per Min 45, Table (RLXFB) 1195 x 8400 mm, Slide(RLXFB) 1170 x 760 mm, Die Height 415 mm, Main Motor 18Kw, Machine Size 1945X1800X4735H, Machine Weight 16tons, Die Cushion N, Wedge adjustment 10 mm, Stroke 200mm.
489	ID MA18352 Make TMP Voronezh Russia Model KB9534 YOM 1990 rebuilt 2009 Condition Reconditioned Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
490	ID MA18347 Make TMP Voronezh Russia Model KB9534 YOM Condition Dismantled Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
491	ID MA18241 Make WMW Erfurt,Germany Model PKZE1250 YOM 1992 Condition Good Condition Photo See Photo 1250 tons, Slide stroke 500 mm, Slide adjustment 215 mm , Maximum shut height between bolster plate and slide (stroke down, adjustment up) 860 mm , Bed area (width x depth) 1600x1850 mm, Slide area (width x depth) 1300x1400 mm , Opening in the bed (width x depth) 1100x1100 mm , Main motor rating 90 kW , Min number of no-load stroke 8 , Cushion force in the bolster 2000 kN , Cushion stroke 200 mm , Height above floor 7900 mm , Press weight 130 tons. With moving bolster.
492	ID MA18203 Make TMP Voronezh Russia Model KA9540 YOM Condition never used Photo See Photo 1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t.
493	ID MA18178 Make TMP Voronezh Russia Model KB9536 YOM Condition Dismantled Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
494	ID MA18177 Make TMP Voronezh Russia Model KB9534 YOM Condition Dismantled Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
495	ID MA18070 Make Smeral,Czech Model LDO315A YOM 1987 Condition Good Condition Photo See Photo 315 tons, ram stroke 200 mm, max. distance between table & ram 900 mm, ram adjustment 20 mm, 44 continuous strokes/min,20 strokes/min., distance from table to slides 1400 mm, table size 1380x950 mm, ram size 1250x900 mm, opening in table 520x420 mm, height of press from floor 4800 mm, main motor power 30 kW, press weight 27 tons, working pressure of clutch 4,5 atmospheres, 0,45 MPA, consumption of air pressure 70 Litres per stroke, Dimensions 2300x2350x4900 mm.
496	ID MA18066 Make TMP Voronezh Russia Model K9538 YOM 1984 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
497	ID MA17917 Make TMP Voronezh Russia Model K9538 YOM Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
498	ID MA17915 Make WMW Erfurt,Germany Model PKZ400 YOM 1967 Condition Good working condition Photo See Photo 400 tons,ram stroke 315 mm,no. of strokes 18 per min.,table size 1000 x 1320 mm, adjustment of ram 200 mm,shut height 525 mm, distance between columns 1000 mm, ram size 800 x 1060 mm, bore in table 650 x 650 mm,capacity of die cushion 63 tons,travel of plate of cushion 125 mm, motor power 32 kW,dimensions: 6300 x 2520 x 2670 mm, weight 33.8 tons
499	ID MA17862 Make TMP Voronezh Russia Model KB9536 YOM 1974 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
500	ID MA17861 Make TMP Voronezh Russia Model KB9534 YOM 1982 Condition Good Condition Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
501	ID MA17812 Make TMP Voronezh Russia Model KB9534 YOM 1982 Condition Excellent Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
502	ID MA17788 Make Russian Model KG2134 YOM 1991 Condition Complete ,good working condition Photo See Photo 250 tons, ram stroke 25-200mm, no of strokes per min 61 or 25, shut height 560mm, bed to ram adjustment stroke 140mm, ram axis to frame distance 400mm, bed size 1120x750mm, ram size 930x730mm, main drive motor power 27 kw, overall dimensions 2500x2700mm, height above floor level 4300mm, mass 21.5 tons
503	ID MA17762 Make TMP Voronezh Russia Model K2540 YOM 1979 Condition Dismantled Photo See Photo 1000 tons, ram stroke 400 mm, no. of strokes 20 per min.,bed size 1250 x 1250 mm, shut height 730 mm, bolster plate to ram adjustment stroke 200 mm, ram dimensions 1200 x 1200 mm, bolster plate thickness 260 mm, overall dimensions: 4310 x 3820 x 6575 mm, main drive motor power 75 kw, weight 77.1 tons.
504	ID MA17731 Make TMP Voronezh Russia Model K9538 YOM 1969 Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
505	ID MA17729 Make WMW,Germany Model PEZZ400 YOM 1992 Condition Perfect Condition Photo See Photo 400 tons , capacity 400 tons at BDC 6,35 mm, 150 tons at 80 mm BDC , ram stroke 200 mm, 32 strokes/min, ram adjustment 160 mm, main motor power 45 kW, deep drawing depth 80 mm, shut height 630 mm, distance between columns 1750 mm, table size 1600 x 1250 mm, ram size 1400 x 1000 mm, bolster plate thickness 105 mm. with NC control system - 2 presses
506	ID MA17727 Make WMW Erfurt,Germany Model YOM Condition Good Condition Photo See Photo 160 tons
507	ID MA17627 Make TMP Voronezh Russia Model K9540 YOM 1977 Condition Excellent ,unused Photo See Photo 1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t.
508	ID MA17424 Make Smeral,Czech Model LKT250A YOM Condition excellent working condition Photo See Photo Nominal forming force: 250 t, Table Dimensions: 1600 x 1200 mm, Ram stroke: 250 mm, Number of strokes: 25 min, Displacement of the ram: 125 mm, Passing the stands: 1600 mm, Clamping height: 760 mm, Ram Dimensions: 1560 x 900 mm, Main motor: 28 kW, Dimensions L x W x H: 2980 x 1500 x 4615 mm, Machine weight: 27 000 kg.
509	ID MA17276 Make Smeral,Czech Model LDO500 YOM overhauled 2008 Condition excellent working condition Photo See Photo 500 tons, Stroke ram 250 mm , Clamping (ram at the bottom dead center, the displacement of the top) Displacement of the ram 160 mm , Number of strokes 38 min-1 , Number of strokes available 28 min-1 , Passing under the leadership of 1620 mm , Desktop table (from left to right x front, rear) 1580 x 1100 mm , Desktop ram (from left to right x front, rear) 1570 x 1100 mm , Main motor 40 kW , The width of the press (from left to right) 2670 mm , Depth press (front back) 2550 mm , The height of the press (total) 5680 mm, The height of the press (above the floor) 5375 mm , Weight 43 tons. Electricity Power supply system 3NPE ~ 50Hz 400V / TN-S Tolerance of supply voltage max ± 10% Installed power 44 kW The largest appliance 40 kW
510	ID MA16917 Make TMP Voronezh Russia Model KB9534 YOM 1987 Condition Good Condition Photo See Photo 250 tons, ram stroke 320 mm, no. of strokes 32 per min., shut height 390 mm, bolster plate-to-ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, bed opening diemensions 500 x 500 mm, ram diemensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW, overall dimensions: floor space 3260 x 2970 mm, height above floor level: 5180 mm, mass approx 23.3 tons .
511	ID MA16632 Make Zdas Model LU160 YOM 1984 Condition Good Condition Photo See Photo 160 tons , shut height 572 mm, ram stroke 125 mm, 28 SPM , voltage 380V , motor 1460 RPM , dimension 2040 x 1575 x 4035 mm, weight 9880 mm, ram size 620 x 610 mm, table size 625 x 795 mm - 2 machines.
512	ID MA16613 Make TMP Voronezh Russia Model KB9540 YOM 1970 Condition Good Condition Photo See Photo 1000 ton, ram stroke 500mm, number of ram strokes rate per minute 20, shut height 680mm, bolster plate to ram adjustment stroke 200mm, bed dimensions 1250 x 1250mm, bed opening dimensions 1000 x 1000mm, ram dimensions 1250 x 1250mm, bolster plate thickness 260mm, main drive motor power 75kW, overall dimensions : floor space 4310 x 3820mm, height above floor level 6790mm, mass 79.5t.
513	ID MA16549 Make TMP Voronezh Russia Model K9536 YOM 1980 Condition Good Condition Photo See Photo 400 tons, ram stroke 400 mm, no. of strokes 25 per min., shut height 470 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm,bed opening dimensions 630 x 630 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm,main drive motor power 40 kW, overall dimensions: floor space 3410 x 3140 mm, height above floor level 5940 mm, mass approx. 32.7 tons .
514	ID MA15967 Make WMW Erfurt,Germany Model PKZE1250 YOM 1976 Condition Excellent condition,under power Photo See Photo capacity 1250 Tons, Stroke 500 mm, Slide Adjustment 250 mm, Shut Height 860 mm, no. of strokes/min. 8, distance between columns 1600 mm, Table Size 1600x1850 mm, Slide Area 1300x1400 mm, main motor 90 kW, Cushion capacity 200 tons & cushion stroke 200 mm, Weight 134 tons.
515	ID MA15637 Make TMP Voronezh Russia Model KA2534 YOM Condition Good Condition Photo See Photo 250 tons , ram stroke 200 mm, 32SPM , shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons.- 3 machines
516	ID MA15494 Make Smeral,Czech Model LDO800 YOM Condition Good Condition Photo See Photo effort: 800 t, distance table/slide: 880 mm, distance between columns: 1900 mm, working area of the table: 1870x1300 mm, slide regulation: 180 mm, required power: 62 kWt.
517	ID MA15211 Make Russian Model K2736 YOM 1986 Condition Good Condition Photo See Photo 400 tons , Slide stroke 150 mm No of continuos slide strokes per min 32; 40, Max No of single strokes per min 24; 30, Shut height 600 mm, Adjustment distance between table and slide 15 mm, Table dim : 1000 x 1740 mm, Slide dim ( front to back ) 1250 mm, BDC : 12 mm, Main drive el.motor power 50 kW, Overall dimensions 3130 x 2340 x 4800 mm, Weight 33.1 tons.
518	ID MA14865 Make TMP Voronezh Russia Model KB2536 YOM 1990 Condition Good working condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
519	ID MA14529 Make TMP Voronezh Russia Model KB2536 YOM 1984 Condition Good working condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons. - 2 machines.
520	ID MA14394 Make TMP Voronezh Russia Model KA2534 YOM 1979 Condition Good Condition Photo See Photo 250 tons , ram stroke 200 mm, 32SPM , shut height 420 mm, bolster plate to ram adjustment stroke 140 mm, bed dimensions 800 x 800 mm, ram dimensions 650 x 650 mm, bolster plate thickness 140 mm, main drive motor power 27 kW , overall dimensions 3260 x 2970 x 5180 mm, mass 23.2 tons.
521	ID MA14358 Make TMP Voronezh Russia Model KB2536 YOM 1989 Condition Good working condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
522	ID MA14103 Make TMP Voronezh Russia Model KA9532 YOM 1977/1979 Condition Good Condition Photo See Photo 160 tons, ram stroke 220 mm, 37 strokes/min, shut height 330 mm, bolster plate to ram adjustment 120 mm, table 710x710 mm, bed dimensions 420x420 mm, bed opening dimensions 560x665 mm, power 10 kw, dimensions 2100x1680x3610 mm, total weight 10.4 tons - 2 machines.
523	ID MA13718 Make TMP Voronezh Russia Model K2538 YOM 1978 Condition Good Condition Photo See Photo 630 tons , ram stroke 320 mm, 20 SPM , shut height 620 mm, bolster plate to ram adjustment stroke 180 mm, bed dimensions 1250 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 61 kW , overall dimensions 3600 x 3470 x 6190 mm, mass 49.6 tons.
524	ID MA12559 Make TMP Voronezh Russia Model K9538 YOM 1972 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
525	ID MA12281 Make Ravne,Germany Model KES160 YOM 1978 Condition Good condition,under power Photo See Photo 160 tons capacity, table size 950 x 1400mm, length 1400mm, ram stroke 180mm, no of strokes per min 55-60, stroke adjustment 120mm, ram size 800 x 1380 mm, main motor 30 KW , dimensions 1400 x 950 x 4050 mm , weight 15 tons.
526	ID MA11679 Make TMP Voronezh Russia Model KB2536 YOM 1980 Condition Photo See Photo 400 tons capacity, ram stroke 250 mm, Ram strokes/min 25, shut height 510 mm, bolster plate to ram adjustment stroke 160 mm, bed dimensions 1000 x 1000 mm, ram dimensions 800 x 800 mm, bolster plate thickness 160 mm, main drive motor power 40 kW , overall dimensions 3410 x 3140 x 5940 mm, mass 32.5 tons.
527	ID MA11212 Make TMP Voronezh Russia Model K9538 YOM 1984 Condition good working condition,complete Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
528	ID MA11090 Make TMP Voronezh Russia Model K9538 YOM 1980 Condition Good Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
529	ID MA11056 Make TMP Voronezh Russia Model K9538 YOM 1982 Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
530	ID MA10974 Make TMP Voronezh Russia Model K9538 YOM 1978 Condition Complete ,good working condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
531	ID MA10606 Make Raskin Model 251BL YOM Condition Photo See Photo 250 tons , stroke 400 mm , daylight 470 mm , stroking rate 22cps/min , motorised adjustment 150 mm , table area 1130 x 1500 mm , ram area 1000 x 1390 mm , die cushion : capacity 48 tons , stroke 225 mm , dimensions 2700 x 2000 mm , height 4000 mm , weight of press 40 tons, 2 rods, lower cushion.Straight Sided.
532	ID MA10187 Make Wilkins & Mitchell Model Maxipress YOM Condition Good Condition Photo See Photo 750 tons , stroking rate 80/min , stroke 178 mm , table area 1066 x 812 mm , table adjustment 15 mm , 4 rods , mechanical ejection , dimensions 2300 x 2500 x 4500 mm , machine weight 45 tons
533	ID MA10120 Make Smeral,Czech Model LDO315A YOM 1983 Condition Photo See Photo Capacity-315 Ton. Rated pressure : 3150kN, Effective stroke : 8 mm, Ram stroke : 200 mm, Ram adjustment: 140 mm, Shut height : 600 mm, Width between uprights and guideways: 1400 mm, Ram area : 1380 x 950 mm, Bed area : 1380 x 950 mm, No. of ram stroke during continous run : 44 min-1, No. of usefull ram stroke : 22, Mechanical upper ejector : Ejecting force 63 kN, Stroke ; 25 mm, Force of air cushion : 160kN, Stroke of air cushion : 45 mm, Press width : 2610 mm, Press height above floor : 5040 mm, Press height : 5140 mm, Total press weight : 26000 kg., Input of the main electric motor : 30 kw, Socked air consumption “single stroke” : 50 dm3/stroke.
534	ID MA8128 Make TMP Voronezh Russia Model K9538 YOM 1974 Condition Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
535	ID MA7667 Make TMP Voronezh Russia Model K9538 YOM Condition Excellent Photo See Photo Capacity : 630 ton, Slide Stroke : 420 mm, Number of slide stroke per min : 20, Maximum distance from bed to slide (stroke down, adjustment up): 750 mm, Adjustment of distance from bed to slide : 180 mm, Table size : 1250 x 1250 mm, Bed opening dimensions : 800 x 800 mm, Slide dimensions L to R, F to B : 1000, 1000 mm, Bolster plate thickness : 180 mm, Total power of drive : 55 kW, Overall dimensions :- L to R : 3200 mm, F to B : 3470 mm, Height : 6100 mm, Weight of the machine : 51.8 ton.
536	ID MA7474 Make TMP Voronezh Russia Model KJ9536 YOM Brand New Condition Photo See Photo 400 tons,slide distance to it lower extreme position where press develops nominal capacity 6 mm, slide stroke 400 mm, slide strokes continuous frequency, min -1, not less 27 mm, single switchings max. frequency, min -1, 19, max. distance between bolster plate and slide in it lower position at upper position of adjustment 470 mm, distance adjustment between bolster plate and slide 160 mm, bolster plate dimensions: left-right 1000 mm, front-back 1000 mm, openings dimensions in bed: left-right 630 mm, front-back: 630 mm, slide dimensions, not less,left-right 800 mm, front-back 800 mm, opening dimensions in uprights: width 700 mm, height 550 mm, bolster plate thickness 160 mm, moving boslter plate height from floor level 730 mm, rigid knock out in slide: max. knocking out effort: 200 kN, max. working stroke 60 mm, hydraulic & pneumatic cushion in bed (by special order): max. working stroke 100 mm, max. knocking out effort 120 kN, max. clamping effort 630 kN, max. die mass suspended to slide 1000 kg, main drive electric motor power 45 kW, press overall dimensions: left-right 2900 mm, front-back 3100 mm, press height from floor level 6115 mm, press mass without devices manufactured by special order 32900
537	ID MA7473 Make TMP Voronezh Russia Model KJ9534 YOM Brand New Condition Photo See Photo 250 tons, rated capacity 2500 kN, slide stroke to the extreme bottom position where the press develops rated capacity 6 mm, slide stroke 320 mm, no. of the slide continuous strokes min -1, not less 40 mm, max. no. of single strokes, min -1, 24 mm, max. distance between bolster plate and slide in the extreme bottom position, adjustment up 390 mm, value of adjustment distance between bolster plate and slide 140 mm, bolster plate dimensions: left-to-right 800 mm, front-to-back 800 mm, thickness of the bolster plate 140 mm, height of upper plane of the bolster plate from the floor level 830 mm, dimensions of opening in the table: left-to-right 500 mm, front-to-right 500 mm, slide dimensions: left-to-right 630 mm, front-to-right 630 mm, dimensions of windows in the posts, width 500 mm, Knock-out (central) in the slide: max. working stroke 60 mm, force 125 kN, max. mass of the die suspended to the slide 800 kg, max. total mass of the die 2000 kg, air pressure in the supplying line, MPa: min 0,5, max 0,7, air pressure consumption per slide stroke, I/str 6, press overall dimensions: left-to-right 2500 mm, front-to-back 2500 mm, press height above floor level 4720 mm, hydropneumatic cushion in the table: max. working stroke 80 mm, max. clamping force 250 kN, max. ejecting force 100 kN, pneumatic cushion in the table: max. working stroke 80 mm, max. ejecting force 100 kN, Knock-out: max. working storke 60 mm, ejecting force 125 kN