V. K. Engineering - Buying & Selling of Machines made easy

Category : Forging Equipment

Sub-Category : Reduce Forging Roll

Total Machines Found : 48

Select

| Machine Details

1

ID	MA37695
Make	Eumuco,Germany
Model	RW1
YOM
Condition	Good Condition
Photo	See Photo
Specification: Electric system Siemens Max. Dia of Workpiece 55 mm Diameter of Rolling Segment 370 mm Usable width of middle roll 500 mm Usable width of outer roll 160 mm Max length of working piece-middle 570 mm Max length of working piece-outside 890 mm Dimensions approx (W x L x H) 2400 x 1350 x 2100 mm Total weight, approx 5.4 ton

2

ID	MI9844
Make	Russian
Model	CA1335
YOM
Condition	Good Condition
Photo	See Photo
Nominal inter axial distance : 320 mm, Nominal force : 800 kN, Roll rotational speed : 65 min, Size of inter axial distance adjustment : +3 mm, Seats for a tool Diameter : 180 -Length 280 Diameter of initial blank, not more, 95 mm, Main motor power : 37 kW, Overall dimensions : 2590 x 2040 x 2130 mm, Weight : 8.8 tons.

3

ID	MI9098
Make	Vomzeh-Russian
Model	C1335
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 80 tons, Nominal force : 800 kN, Nominal center distance between rolls : 320 mm, Center distance adjustment : ą3 mm, Roll rotation frequency : 65 min-1, Maximum stock diameter : 95 mm Tooling dimensions : Diameter : 180 mm, Length : 280 mm, Main drive motor power : 36 kW, Overall dimensions (floor space) : 2590 x 1930 mm, Height above floor level : 2130 mm, Mass approx : 8.2 tons.

4

ID	MA36351
Make
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Reduce Forging roll with automatic Chinese brand new machine 560 Automatic Forging Roll + suitable package + one set accessories + one set die for one typical product + one set gripper of manipulator for one product + one set gripper of feeding device for one product outer diameter of rolling die mm 560 roller diameter mm 360 width in commission for rolling mm 610 rotating speed of roller r/min 48 max. rolling length mm 800 Max. billet length mm adjustment of centre distance mm 560ą10 main motor power (380V, 3phases, 50Hz) Kw 55 max. billet diameter mm 100 longitudinal stroke of transfer arm mm 758 lateral stroke of transfer arm mm 620 lateral position adjustment mm 300 vertical and horizontal direction adjustment mm OK longitudinal moving stroke for single pass mm 80-140 arm rotation angle o 90 Main components Electric part PLC Delta Servo controller Delta Servo motor Delta Proximity switch Encoder Omron Photoelectric Switch Omron motor contactor Schneider Air switch Schneider relay Schneider Lubrication part Automatic lubrication pump Step distribution device Lubrication motor-pump X move Gas driving part Gas cylinder Magnet valve Double valve clutch Kaka Water-oil dividing device Hydraulic driving part Variable pump Magnet valve Transmission part Bearing HRB v-belt History Raw material Frame Q235 steel plate welding roller C45 forging die 5CrNiMo Gear box Q235 steel plate welding Small gear 35CrMo+QT+ high frequency treatment Big gear 35CrMo+QT Gear shaft 42CrMo+QT+ high frequency treatment

5

ID	MA36288
Make	Eumuco,Germany
Model	RW2
YOM	1998
Condition	Good Condition
Photo	See Photo
Max thickness of input material : ⌀ 112mm � 100mm Useable width of rolling : 700mm Diameter of segments: 560mm Rollers adjustment: 20mm (mini 542 / max 562mm) Drive capacity: 30kW Good mechanical condition. No electrical cabinet. Machine used to work automatically with Eumuco system which was then replaced by a robot.

6

ID	MA36098
Make	TMP Voronezh Russian
Model	C1335
YOM	1972
Condition	Good Condition
Photo	See Photo
Nominal inter axial distance : 320 mm, Nominal force : 800 kN, Roll rotational speed : 65 min, Size of inter axial distance adjustment : +3 mm, Seats for a tool Diameter 180 & Length 280 Diameter of initial blank max. 95 mm, Main motor power : 36 kW, Overall dimensions : 2590 x 1930 x 2130 mm Weight : approx 10 tons Machine clean, motor in running condition

7

ID	MA36051
Make	EUMUCO
Model	RW1a
YOM
Condition	Good Condition
Photo	See Photo
Mecanique & Technique 80 x 80mm WINDING DIAMETER 500mm SCHAFT DIAMETER 320mm ROLLERS LENGTH 1100mm ROLLERS ADJUSTMENT 18mm ROLLERS SPEED 65rd/min MAX THICKNESS OF INPUT MATERIAL 80mm DRIVE CAPACITY 37KW Transport to CFR Nhava Sheva: One 20' container from France is currently 5000 . The transport costs are changing nowadays evereytime, as you already know. Therefore, the price can change according to the date of your order and shipment.

8

ID	MA36050
Make	National
Model
YOM
Condition	Good Condition
Photo	See Photo
Type -4 DIAMETER OF ROLLERS -254 mm x W.210 mm MAX THICKNESS OF INPUT MATERIAL -57 mm MAX. ROLL LENGTH PER PASS - 708 mm Max. NUMBER OF PASS -4 ROLLERS SPEED- 73 rpm ELECTROPNEUMATIC CLUTCH AND BRAKE DOUBLE GEARING HARNESS DRIVE CAPACITY -15 CV = 1445 rpm DIMENSIONS -1750 x 1750 x H.1700 mm WEIGHT -6T Transport to CFR Nhava Sheva: One 20' container from France is currently 5000 . The transport costs are changing nowadays everytime, as you already know. Therefore, the price can change according to the date of your order and shipment.

9

ID	MA35343
Make	Chinese
Model	ZGD-1000
YOM
Condition	Brand New
Photo	See Photo
Nominal diameter of roll forging tool: 1000 mm, Roll forging effective width (inner roller): 1200 mm, Max. length of roll forging parts (inner roller): 2300 mm, Adjustment of center distance between rollers: 20 mm, Rpm off roller: 30 r/min Robot: Longitudinal stroke:7000 mm, Horizontal stroke: 800 mm, Rotation angle: any ◦ Max. diameter of blank:200 mm, Motor power:285 KW

10

ID	MA35342
Make	Chinese
Model	ZGD-930
YOM
Condition	Brand New
Photo	See Photo
Nominal diameter of roll forging tool: 930mm, Roll forging effective width (inner roller): 1000 mm, Max. length of roll forging parts (inner roller): 1430mm, Adjustment of center distance between rollers: 25 mm, Rpm off roller: 30 r/min Robot: Longitudinal stroke: adjustable , Horizontal stroke: adjustable, Rotation angle: any ◦ Max. diameter of blank:180 mm, Motor power:155 KW

11

ID	MA35341
Make	Chinese
Model	ZGD-850
YOM
Condition	Brand New
Photo	See Photo
Nominal diameter of roll forging tool: 850 mm, Roll forging effective width (inner roller): 760 mm, Max. length of roll forging parts (inner roller): 1310 mm, Adjustment of center distance between rollers: 25 mm, Rpm off roller: 30 r/min Robot: Longitudinal stroke: adjustable, Horizontal stroke: adjustable , Rotation angle: any ◦ Max. diameter of blank:160 mm, Motor power:155 KW

12

ID	MA35340
Make	Chinese
Model	ZGD-680
YOM
Condition	Brand New
Photo	See Photo
Nominal diameter of roll forging tool: 680 mm, Roll forging effective width (inner roller): 850 mm, Max. length of roll forging parts (inner roller): 1050 mm, Adjustment of center distance between rollers: 25 mm, Rpm off roller: 40 r/min Robot: Longitudinal stroke:1400 mm, Horizontal stroke: 750 mm, Rotation angle: any ◦ Max. diameter of blank:140 mm, Motor power:55 KW

13

ID	MA35339
Make	Chinese
Model	ZGD-560
YOM
Condition	Brand New
Photo	See Photo
Nominal diameter of roll forging tool: 560 mm, Roll forging effective width (inner roller): 700 mm, Max. length of roll forging parts (inner roller): 870 mm, Adjustment of center distance between rollers: 20 mm, Rpm off roller: 60 r/min Robot: Longitudinal stroke:800 mm, Horizontal stroke: 700 mm, Rotation angle: any ◦ Max. diameter of blank:110 mm, Motor power:37 KW

14

ID	MA35338
Make	Chinese
Model	ZGD-460
YOM
Condition	Brand New
Photo	See Photo
Nominal diameter of roll forging tool: 460 mm, Roll forging effective width (inner roller): 570 mm, Max. length of roll forging parts (inner roller): 710 mm, Adjustment of center distance between rollers: 17mm, Rpm off roller: 65 r/min Robot: Longitudinal stroke: 630 mm, Horizontal stroke: 500 mm, Rotation angle: any ◦ Max. diameter of blank:80 mm, Motor power:30 KW

15

ID	MA35337
Make	Chinese
Model	ZGD-370
YOM
Condition	Brand New
Photo	See Photo \| See Video
Nominal diameter of roll forging tool: 370 mm, Roll forging effective width (inner roller): 500 mm, Max. length of roll forging parts (inner roller): 570 mm, Adjustment of center distance between rollers: 15 mm, Rpm off roller: 80 r/min Robot: Longitudinal stroke: 490 mm, Horizontal stroke: 435 mm, Rotation angle: any ◦ Max. diameter of blank: 60 mm, Motor power: 22 KW

16

ID	MA35336
Make	Chinese
Model	ZGD-270
YOM
Condition	Brand New
Photo	See Photo
Nominal diameter of roll forging tool: 270 mm, Roll forging effective width (inner roller): 300 mm, Max. length of roll forging parts (inner roller): 450 mm, Adjustment of center distance between rollers: 12 mm, Rpm off roller: 80 r/min Robot: Longitudinal stroke: 400 mm, Horizontal stroke: 300 mm, Rotation angle: any ◦ Max. diameter of blank: 42 mm, Motor power: 15 KW

17

ID	MA34911
Make	Eumuco,Germany
Model	RW1
YOM	1970/2011
Condition	Good Condition
Photo	See Photo
Electric system:Siemens Max. Dia of Workpiece:55 mm Diameter of Rolling Segment:370 mm Usable width of middle roll:500 mm Usable width of outer roll:160 mm Max length of working piece-middle:570 mm Max length of working piece-outside 890 mm Dimensions approx (W x L x H);2400 x 1350 x 2100 mm Total weight, approx5.4 ton

18

ID	MA34129
Make	Eumuco,Germany
Model	RW0
YOM
Condition	Good Condition
Photo	See Photo
Ø OF SEGMENTS:300 mm USABLE ROLLERS WIDTH MEDIAN PART :400 mm OUTER PART:140 mm MAX ROLLING LENGTH CENTER PART :460 mm OUTER PART :720 mm ROLLERS ADJUS:110 rd.p.m. MAX THICKNESS OF INPUT MATERIAL:40 mm MOTOR POWER:15 HP DIMENSIONS WIDTH:2200 mm DEPTH:1650 mm HEIGHT: 2100 mm Transport to CFR Nhava Sheva: One 20' container from France is currently 5000 . The transport costs are changing nowadays evereytime, as you already know. Therefore, the price can change according to the date of your order and shipment.

19

ID	MA33700
Make	Ajax
Model	0
YOM
Condition	Good Condition
Photo	See Photo
Width of Roll Dies Half Round..14" Flat Back...14" Overhung...6" Max. Roll Die Dia. Half Round...12 1/2" Flat Back... 12 1/2" Overhung...12 1/2" Max. Usable Die Periphery Half Round...19" Flat Back...11" Overhung...30" Min. Roll Die Dia. Half Round..10 1/2" Flat Back...10 1/2" Overhung...10 1/2" Min. Usable Die Periphery Half Round..16" Flat Back...9 1/2" Overhung...25" Machine Dimensions..68" W x 50" L Approximate Shipping Weight..8,500 lbs.

20

ID	MA33699
Make	Ajax
Model	0
YOM
Condition	Good Condition
Photo	See Photo
Width of Roll Dies Half Round..14" Flat Back...14" Overhung...6" Max. Roll Die Dia. Half Round...12 1/2" Flat Back... 12 1/2" Overhung...12 1/2" Max. Usable Die Periphery Half Round...19" Flat Back...11" Overhung...30" Min. Roll Die Dia. Half Round..10 1/2" Flat Back...10 1/2" Overhung...10 1/2" Min. Usable Die Periphery Half Round..16" Flat Back...9 1/2" Overhung...25" Machine Dimensions..68" W x 50" L Approximate Shipping Weight..8,500 lbs.

21

ID	MA33698
Make	Ajax
Model	1
YOM
Condition	Good Condition
Photo	See Photo
Rating in tons: 200 Die grip in tons: 100 HDR SL Stroke: 150 mm, Stroke /min: 90 Die opening: 2 1/4" Stoke gather: 3 3/4" Hold on: 2 1/2" Die height: 9" Die thickness: 5" Die seat length: 8" Tool and die space (max): 20 1/2" Eccentric pin dia: 7" Journal dia: 6" Flywheel dia: 54" Total energy (Ft/Lbs): 11,100 Clutch torque (In /Lbs): 171,010 Gear ratio: 1/1 Torque at crankshaft (In/Lbs): 171,010 Motor HP: 7 1/2 Floor Space F-B: 7'-4" Floor space L-R:6'-2" Total machine height:7'-6" Apprx weight: 18000 (In /Lbs)

22

ID	MA33625
Make	Eumuco,Germany
Model	ARWS1
YOM
Condition	Good Condition
Photo	See Photo
Diameter of work piece: Max. 55 mm, Diameter of roll segments: 370 mm, Width of roll: 500 mm, Roll revolutions: 15 min^-1, Roll length: max. 530 mm, Driving power: 18,5/380/50 kW/V/Hz Dimensions: 530 x 2800 x 2000 mm, Weight: 9.27 ton

23

ID	MA33537
Make	National
Model
YOM	Retrofit 2019
Condition	Good Condition
Photo	See Photo \| See Video
Model : 6 Maximum Stock Diameter: 3″ Maximum Lenght of Rolled Section: 24″ Forge Roll Diameter: 300 mm Forge Roll Widht: 310 mm Roll Revolutions: ~65 RPM Roll Holder Axle Diameter: 190 mm Distance Between Center Axles: ~305 mm Distance Adjustment Between Axles: 2 mm Work Table Dimensions ( L x W ): 375 x 315 mm Flywheel Diameter: 1680 mm Flywheel Widht: 345 mm Drive Power: 25HP /1100 rpm Rated Voltage: 440 V Floor Space Overall: 1,9 x 2,0 x 1,8 Mts Machine Weight: 8 ton

24

ID	MA33322
Make	Carli
Model	DL-460
YOM
Condition	Good Condition
Photo	See Photo
Sectorholders shafts diameter 300 mm Sectors diameter 460 mm Sectors working width 700/1000 mm Rollable length 710 mm Material cross section 90 x 90 mm Cylinders approacing up to 40 mm Motor power 75 HP Air pressure 5-7 atm Total weight abt. 14000 Kg Dimensions, mm: A=3300 B=1000 C=2300 D=400 E=1450 F=450 G=1000 H=2350 I=1000 L=460 M=1500 We will made a full recondition of mechanical parts, install a new lubrication and pneumatic systems, also we will install a brand new electric system with PLC. Safety system, operator protection system, overload protection, main motor speed control, counter for ram press position, HMI. System based on the DELTA/Schneider (Taiwan/Germany), Mitsubishi, Samcoon PLC Warranty on all press systems: 6 months

25

ID	MI7238
Make	TMP Voronezh Russian
Model	CA1335
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Nominal inter axial distance : 320 mm, Nominal force : 800 kN, Roll rotational speed : 65 min, Size of inter axial distance adjustment : +3 mm, Seats for a tool Diameter : 180 -Length 280 Diameter of initial blank, not more, 95 mm, Main motor power : 37 kW, Overall dimensions : 2590 x 2040 x 2130 mm, Weight : 8.8 tons.

26

ID	MA33028
Make	Manyo,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Inner Segment Outer Diameter : 460 mm Inner Segment Effective Width : 530 mm Inner Roll Shaft Diameter : 280 mm Outer Segment Diameter : 460 mm Outer Segment Effective Width : 210 mm Outer Roll Shaft Diameter : 240 mm Roll Shaft Adjustment : 6 mm Roll RPM : 65 Max Size of Raw Billet : 75 mm Clutch & Brake : Air Friction Disc Machine Weight : 9.500 kgs Machine Type : Manipulator Make : Manyo Stroke : 600 mm Pitch : 70 - 130 mm Cycle Time : 60 SPM Machine Weight : 5.500 kgs

27

ID	MA31838
Make	TMP Voronezh Russian
Model	CA1335
YOM	1989
Condition	Good Condition
Photo	See Photo
Nominal inter axial distance : 320 mm, Nominal force : 800 kN, Roll rotational speed : 65 min, Size of inter axial distance adjustment : +3 mm, Seats for a tool Diameter : 180 -Length 280 Diameter of initial blank, not more, 95 mm, Main motor power : 37 kW, Overall dimensions : 2590 x 2040 x 2130 mm, Weight : 8.8 tons.

28

ID	MA31592
Make	Manyo,Japan
Model	FR460A
YOM
Condition	Good Condition
Photo	See Photo
1) Forging Roll Inner segment outer diameter: 460 mm, Inner segment effective width: 530 mm, Inner roll shaft diameter: 280 mm, Outer segment diameter: 460 mm, Outer segment effective width: 210 mm, Outer roll shaft diameter: 240 mm, Roll RPM: 60 Clutch & brake: Air friction disc Machine weight: 9,500 kgs. Manipulator Stroke: 600 mm Pitch: 70-130 mm, Cycle time: 60 SPM Machine weight: 5500 kgs.

29

ID	MA31418
Make	TMP Voronezh Russian
Model	C1037A
YOM
Condition	Good Condition
Photo	See Photo
160 tons, nominal interaxial distance 500mm,dimensions of roller for tool, dia 360mm, length 400mm, roller rotational speed 28/min, size of adjustment of interaxial distance +/-6 mm, dia of initial blank not more 90mm, length of rolled blank 650mm, main drive electric motor power 55kW, roll over dimensions :length 3095mm, width 2400mm, height 2800mm, mass of rolls 17.7 tons

30

ID	MA31354
Make	National
Model	#6
YOM
Condition	Good Condition
Photo	See Photo
MODEL ... 6 MAXIMUM STOCK DIAMETER .. 3" DIAMETER OF ROLL ... 12" MAXIMUM LENGTH OF ROLLED SECTION . 24" STANDARD ROLL WIDTH .. 10-1/2" AIR CLUTCH ... YES AIR BRAKE ... YES CONTROLS ... YES MOTOR ... 25 HP

31

ID	MA31353
Make	Ajax
Model
YOM
Condition	Good Condition
Photo	See Photo
Width of Roll Dies Half Round..14" Flat Back...14" Overhung...6" Max. Roll Die Dia. Half Round...12 1/2" Flat Back... 12 1/2" Overhung...12 1/2" Max. Usable Die Periphery Half Round...19" Flat Back...11" Overhung...30" Min. Roll Die Dia. Half Round..10 1/2" Flat Back...10 1/2" Overhung...10 1/2" Min. Usable Die Periphery Half Round..16" Flat Back...9 1/2" Overhung...25" Machine Dimensions..68" W x 50" L Approximate Shipping Weight..8,500 lbs.

32

ID	MI6988
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
63 mm working trial possible

33

ID	MA31292
Make	TMP Voronezh Russian
Model	CA1335
YOM
Condition	Good Condition
Photo	See Photo
Nominal force, kN : 800 Nominal center distance between rolls, mm : 320 Center distance adjustment, mm : ą3 Roll rotation frequency, min-1 : 65 Maximum stock diameter, mm : 95 Tooling dimensions, mm: diameter : 180 length : 280 Main drive motor power, kW : 36 Overall dimensions, mm: floor space : 2,590x1,930 height above floor level : 2,130 Mass, t, approx : 8.2

34

ID	MA31046
Make	EUMUCO
Model	RW1a
YOM
Condition	Good Condition
Photo	See Photo
Ø of segments : 460 mm Tool chucking width : center part 570 mm outer rollers 210 mm Max. rolling lenght : center part 710 mm Adjustment of rollers : ar. 462 to 445 mm Max. thickness of input material  75 mm Speed of rollers : 65 rpm Drive capacity : 18,5 kW

35

ID	MA30882
Make	National,USA
Model
YOM
Condition	Good Condition
Photo	See Photo
Type 7 1/2 Diameter of rollers- 381 mm x W 343 mm, Max thickness of input material- 102 mm, Max. Roll length per pass- 762 mm, Max. number of pass- 2, Rollers speed- 50 rpm, Electropneumatic clutch and brake, Double gears changing, Drive capacity- 29.5 kw=1350 rpm, Dimensions- 2895 x 2310 x H 2060 mm, Weight- 12 T Transport to CFR Nhava Sheva: One 20' container from France is currently 5000 . The transport costs are changing nowadays evereytime, as you already know. Therefore, the price can change according to the date of your order and shipment.

36

ID	MA30879
Make	National,USA
Model
YOM
Condition	Good Condition
Photo	See Photo
MODEL ... 6 MAXIMUM STOCK DIAMETER .. 3" DIAMETER OF ROLL ... 12" MAXIMUM LENGTH OF ROLLED SECTION . 24" STANDARD ROLL WIDTH .. 10-1/2" AIR CLUTCH ... YES AIR BRAKE ... YES CONTROLS ... YES MOTOR ... 25 HP

37

ID	MA30867
Make	Hasenclever
Model	AWF400/800/800
YOM
Condition	Good Condition
Photo	See Photo
Vollautomatische Reckwalze Make : Hasenclever Model : AWF 400/800/800 Fully automated forging roll Laminoir automatique Hasenclever Max.werkstuckdurchmesser 150mm Max.diameter of piece Diametre max. de la piece Nutzbreite des Werkzeugraumes 355-800 mm Usable width of tool Largueur utilisable d'outil Durchmesser der Walzensegemente 80mm Diameter of roll segment Diametre du segment du cylindre Walzendrehzahl min^-1 30 min^-1 Roll revolutions min^ - 1 Nombre de tours du cylindre min^ - 1 Walzenverstellung 24 mm Roll adujstment Ajustement du cylindre Antriebsleistung 85KW Driving power Puissance motrice

38

ID	MA30847
Make	EUMUCO
Model	RW1a
YOM
Condition	Good Condition
Photo	See Photo
Segments- 460 mm, Tool Chucking width: Center part manual chucking- 570 mm, Center part quick chuking, Outer roller- 210 mm, Max rolling length: Center part- 710 mm, Outer rollers- 17 mm, Rollers adjusment- 17 mm, Rollers speed- 65 rd/min, Max thickness of input material- 75 mm, Drive capacity- 25 HP

39

ID	MA30731
Make
Model
YOM
Condition
Photo	See Photo
Diameter of segments- 370 mm, Max thickness of input material- 55 mm, Center part- 570 mm, Outer rollers- 890 mm, Rollers adjusment- 15 mm, Rollers speed- 80 rd/min, Motor- 20HP, Mechanically in good condition, complete, excluding electrics. Automatic loader has to be retrofitted. AUTOMATED REDUCE ROLL Quantity- 2 no.s

40

ID	MA30699
Make	EUMUCO
Model	ARWS1
YOM
Condition
Photo	See Photo
Diameter of segments- 370 mm, Max thickness of input material- 55 mm, Center part- 570 mm, Outer rollers- 890 mm, Rollers adjusment- 15 mm, Rollers speed- 80 rd/min, Motor- 20HP, Mechanically in good condition, complete, excluding electrics. Automatic loader has to be retrofitted.

41

ID	MA30698
Make	EUMUCO
Model	RW1
YOM
Condition
Photo	See Photo
Diameter of segments- 370 mm, Central part manual chucking- 500 mm, Outer roller- 160 mm, Center part- 570 mm, Outer rollers- 890 mm, Rollers adjusment- 15 mm, Rollers speed- 80 rd/min, Max thickness of input material- 55 mm, Drive capacity- 20 HP

42

ID	MA30360
Make	Kurimoto,Japanese
Model
YOM
Condition	Good Condition
Photo	See Photo
Roll External Diameter: 465 mm Roll Internal Diameter: 300 mm Roll Width: 355 mm Distance between roll shafts: 456 - 466 mm Adjust: 10 mm Diameter of material: 85 mm Length of material: 500 mm RPM: 67.5 Billet Length: 100 - 400 mm Manipulator Front/Back Stroke: 600 mm Arm Balance : 100 mm Side Feed Stroke :70 P x 4 Turnover:90 degrees

43

ID	MI6752
Make	TMP Voronezh Russian
Model	CA1335
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Nominal inter axial distance : 320 mm, Nominal force : 800 kN, Roll rotational speed : 65 min, Size of inter axial distance adjustment : +3 mm, Seats for a tool Diameter : 180 -Length 280 Diameter of initial blank, not more, 95 mm, Main motor power : 37 kW, Overall dimensions : 2590 x 2040 x 2130 mm, Weight : 8.8 tons.

44

ID	MA30291
Make	TMP Voronezh Russian
Model	C1335
YOM	1982
Condition	Good Condition
Photo	See Photo
Nominal inter axial distance : 320 mm, Nominal force : 800 kN, Roll rotational speed : 65 min, Size of inter axial distance adjustment : +3 mm, Seats for a tool Diameter 180 & Length 280 Diameter of initial blank max. 95 mm, Main motor power : 36 kW, Overall dimensions : 2590 x 1930 x 2130 mm Weight : approx 10 tons Machine clean, painted with motor in running condition

45

ID	MA30229
Make	Eumuco,Germany
Model	RW0
YOM	1970
Condition	Good Condition
Photo	See Photo
aa

46

ID	MA29431
Make	Eumuco,Germany
Model	ARWS2A
YOM
Condition	Good Condition
Photo	See Photo
Nominal distance between axis : 680 mm, Nominal force : 3000 kN, Diameter of incoming billet : 130 mm, Reduction ratio: 1,16.1,53.

47

ID	MA29429
Make	Eumuco,Germany
Model	RW3
YOM	1978
Condition	Good condition,under power
Photo	See Photo
Diameter of Rolling Segments : 800 mm, Width of Rollers -Inner/Outer Rolls : 340 mm / 760 mm, Max. Rolling Length -Inner/Outer Rolls : 1240 mm / 1920 mm, Roll Adjustment : 25 mm, Speed of the Rollers (1/min RPM) : 30, Max. Thickness of Input Material : 150 mm, Forging Press Power : 6000/8000 t, Drive Motor Power : 85 kW, Electrics : 380 V, Automatic Manipulator :- Drive way X : 1500 mm, Drive way Y : 2400 mm, Turning radius, turning tower : min. 120 deg, Turning radius pinch : 360 deg, Billet Length : 286-1680 mm, Billet Diameter : 57-120 mm, Billet Weight : 200 kg.

48

ID	MA28705
Make	TMP Voronezh Russian
Model	CA1335
YOM
Condition	Good Condition
Photo	See Photo
Nominal inter axial distance : 320 mm, Nominal force : 800 kN, Roll rotational speed : 65 min, Size of inter axial distance adjustment : +3 mm, Seats for a tool, Diameter Length : 180 mm, Diameter of initial blank : 280 mm, Not more : 95 mm, Main motor power : 36 kW, Overall dimensions : 2590 x 1930 x 2130 mm, Weight : 8.2 tons.

top