V. K. Engineering - Buying & Selling of Machines made easy

Category : Gear Machines

Sub-Category : Gear Grinder CNC

Total Machines Found : 31

Select

| Machine Details

1

ID	MA38513
Make	Reishauer
Model	RZ300E
YOM	1981
Condition	Good Condition
Photo	See Photo
Machine equipped with the following : Faessler dresser AF filtration unit Misc gears Lots of tooling and work holding Manuals and electrical

2

ID	MA37374
Make	Liebherr
Model	LCS182
YOM	2000
Condition	Good Condition
Photo	See Photo
Type of Control CNC max. wheel diameter 180 mm max. module 5 min. module 1 Control LIEBHERR min. number of teeth 7 tool length - max. 210 mm Dimensions (L x W x H) 4.500 x 2.840 x 2.800 mm weight of the machine ca. 14 t

3

ID	MA37305
Make	Okamoto
Model	SHG360NC
YOM	1992
Condition	Good Condition
Photo	See Photo
Grinding Dia : φ25〜360mm Grinding width : Max 200mm Module : m0.5 -5 Gear No .: 12-25S Whetstone axis motor : 5.5KW inverter Whetstone size : φ350x 64/84/100xφ160mm Max. Screw angle : +/- 45 Wt :8000kg NC Nedac

4

ID	MA37260
Make	Hofler
Model	PROMAT 400
YOM	1999
Condition	Good Condition
Photo	See Photo
Grindable Gear Ų, min./max. 10 - 400 mm Module Range 0,5 - 10 Max. Grindable Profile depth 45 mm Gear width 210 mm Stroke length 230 mm Approx. workpiece length between centers 150 – 500 mm Swing over table approx. 235 – 495 mm Max. No. of teeth 5 – 500 mm Table size dia x bore 180 x 40 mm Max. Table Load / Workpiece weight 100 kg Grinding Wheel Dimensions Ų x width 400 x 45 mm Grinding wheel speed steplessly adjustable 4.000/60 rpm/m-sec. Grinding wheel drive 15 kW Size of diamond dressing wheel 180 x 40 mm Total Drive 30 kW / 400 V / 50 Hz Total weight of Machine 6,5 tons Special Equipment / Accessories: · Machining Process: Profile Grinding of Spur Gears by a profiled Grinding Wheel, one or One or two flank grinding process, the workpiece is moving up and down (Y-axis) and is Indexed from tooth to tooth by th B-Axis. The grinding head has fixed angle for straight toothed gears. · BWO CNC Control Model 900 (German Manufacturer) for 4+2 Axis with dialogue Programming of grinding programms based on the input data for an optimal grinding process in combination with profile and lead modifications. · CNC-Controlled Grinding Wheel Dressing Device with motorized Diamantroll mounted behind the Grinding wheel on a separate slide (Z-Axis) in conjunction with the axis of the grinding slide ( X-Axis) the software provides all modifications to involute basis profiles and dressing cycles. Dressing time for redressing 15 seconds, new profile generating takes 5 minutes dressing time. · DITTEL Balancing Unit , Model M 5000, with feeler and control unit · Hydraulically adjustable tooth gap threading device, ideal for pre-machined gears · Workpiece Counter Steady with hydraulic clamping device, pneumatic tailstock · Complete Enclosure of working area with sliding door, large grinding coolant device approx 2.000 Litres with large filtering system made by RESY Model KBF 802/710 and coolant temperature control make FURRER, Electrostatic oil mist Filter, and Many more accessories like flanges, clamping devices, spindle oil cooler, etc.

5

ID	MA37258
Make	Reishauer
Model	RZ301AS
YOM	1993
Condition	Good Condition
Photo	See Photo
Gear Ų, min./max. 10 - 330 mm Module 0.5 - 7 Helix angle +/- 45 ° Max. Workhead stroke 180 mm No. of teeth 10 - 600 Max. Clamping Length of Workpiece 420 up to 620 mm Max. weight of workpiece 60 kg Grinding worm Ų x width 350 x 84 – 104 mm Speed of Grinding Worm 1.100 to 1.900 rpm Spindle Drive 4 kW, total electrical load, approx. 12 kW - 400 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features · Modern CNC control: Data input and set-up mode are effected via operator in direct dialogue. Programming language is interchangeable from German to English. Data carrier software allows data input and output via a serial interface. · Continuous generating gear grinding method: Automatic grinding cycle, including automatic re-profiling of the grinding wheel on the machine. Shift grinding device: During the grinding process the workpiece is constantly shifted tangentially across the grinding wheel. · Machine was modernized by BURRI Company approx 10 years ago with an electronic controlled V-Axis for generating the lead on the worm wheel without any change gears, all profile modifications can be effected easily, that reduces a lot of idle times ! Built on motorized single diamond disc dressing device SP-DR with some diamond tools. · Also the A-Axis is DC-motorized to swivel the Workpiece/Helix angle, CNC controlled, · Built-on hydraulically swivelling sensor for automatic positioning of the grinding wheel in the tooth gap. This saves a lot of time. · DITTEL Grinding Wheel Balancing Device. · Hydraulic workpiece clamping with centres and counter centres in the worpiece slide. · Fully covered working area with oil mist exhaust, two sliding doors…there is no original Coolant device available, we may have a separate Coolant oil separator available. · Separate switch and control cabinet. * Separate hydraulic unit. Some Grinding wheel flanges.

6

ID	MA37248
Make	Pfauter
Model	G300
YOM	1997
Condition	Good Condition
Photo	See Photo
Max. Diameter: 350 mm Max. Module: 6 mm Installed Power KW 50 Tension V 380 H 250

7

ID	MA37227
Make	Hofler
Model	Viper500W
YOM	2016
Condition	Good Condition
Photo	See Photo
GENERATING GRINDING YES PROFILE GRINDING YES INTERNAL GRINDING YES WORM GRINDING YES WORKPIECE DIAMETER (MAX.) 500 mm WORK AREA OVER TABLE (MIN.) 300 mm WORK AREA OVER TABLE (MAX.) 800 mm GRINDING STROKE (MAX.) 500 mm DISTANCE BETWEEN CENTER ABOVE TABLE (MIN.) 442 mm DISTANCE BETWEEN CENTER ABOVE TABLE (MAX.) 1,042 mm MODULE 13 GRINDING WHEEL SPEED (MAX.) 6,000 RPM SWIVEL ANGLE (MIN.) -180° SWIVEL ANGLE (MAX.) 45° GRINDING WHEEL DIAMETER (MIN.) 221 mm GRINDING WHEEL DIAMETER (MAX.) 350 mm GRINDING WHEEL WIDTH (MAX.) 75 mm GRINDING WORM WIDTH (MAX.) 150 GRINDING SPINDLE 37 kW TABLE DIAMETER 400 mm TABLE LOAD (MAX.) 500 kg TABLE HOLE DIAMETER 100 mm TABLE HOLE DEPTH 500 mm TABLE ROTATION SPEED (MAX.) 1,000 RPM CONTROL MANUFACTURER Siemens CONTROL CNC (Siemens Sinumerik 840D Solution Line) EQUIPPED WITH: Siemens Sinumerik 840D Solution Line Controller Onboard Gear Inspection System Profile/Lead/Spacing/Root Dia./Tip Dia./Workpiece Position Internal Grinding Attachment External Grinding Arm Line-by-Line Dressing - Generating Grinding Bias-Control - Generating Grinding Beveloid Grinding - Generating Grinding Special Profiles (e.g. Cycloid Gears) - Generating Grinding / Profile Grinding Asymmetrical Involutes - Profile Grinding Spline Shafts - Profile Grinding Spline Shaft Inspection Double Helical Gearing - Profile Grinding Multiple Gearings - Profile Grinding Topological Modifications - Profile Grinding Bias-Control - Profile Grinding Hoffman HSF 100SE/K Filtration System Fire Suppression System Stacklight Foot Switch Manuals and Documentation

8

ID	MA37192
Make	Niles
Model	ZE630
YOM	2003
Condition	Good Condition
Photo	See Photo \| See Video
Maximum Gear Diameter: 650mm Center Distance Table to Wheel, Min/Max: 100/500mm Helix Angle:-0.375° Stroke Length: 600mm Maximum Table Load:1200kg Table Diameter: 650mm Table Bore: 125mm Dia. / 500mm Depth Grinding Wheel Diameter: 350mm Grinding Wheel Width:80mm Grinding Wheel Motor18/23 KW EQUIPPED WITH: Siemens Sinumerik 840D CNC Coolant System Mist Collector

9

ID	MA37189
Make	BHS HOFLER
Model	H4000
YOM	1990
Condition	Good Condition
Photo	See Photo
Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system

10

ID	MA36911
Make	Reishauer
Model	RZ362A
YOM	1995
Condition	Good Condition
Photo	See Photo
CNC Generating style Gear Grinder Max Wheel Diameter 360mm Min Module: 0.5 Max Module : 7mm Root Circle Diameter : 10mm Slide Stroke : 175mm Clamping Length Maximum: 515mm Workpiece Weight : 60kg Number Of Teeth : 10 - 600 Pressure Angle : 10 - 45 Helix Angle : -/+45 Grinding worm wheel Dia :280 - 350mm Width of Grinding worm wheel : 84 / 104mm Total power requirement: 32KW Weight of the Machine :8 Ton The machine is still connected and can be viewed in operation until around the end of the year, when it will be disconnected and delivered. The machine is complete with profiler, spindle, Turboseparator, loading system (no tailstock). As can be seen from the measurement protocol, the machine is in excellent condition and maintenance has always been done

11

ID	MA36862
Make	Gleason USA
Model	TAG400
YOM	1995
Condition	Good Condition
Photo	See Photo
Generating Style gear grinder. This Machine has TWIST Grinding Option. This machine can be Used for Small or large Run production machine specifications are as follows: Max Diameter Gear : 15.7" Max pitch : 3.0 DP 15.75": Max Tip Diameter 400": Min Root Diameter 8.00": Max Face Width 50.0-3.0 : Diametral Pitch Range 0.5-8.0 : Modular Range 6-600 : Number of Teeth 8"-31.5": Distance Between Centers +/- 45 Degrees Max 14.5-30 Degree Pressure Angle Lead Relieving Lead Crowning Special Relieving Special Crowning Conical Taper Gear Concave Crowning 150 Lb. Max Workpiece Weight 19,550 Lbs Weight of Machine Machine is equipped with the following GE-Fanuc 15 M control Pendant controller Full enclosure CNC Dressing unit Oberlin model OPF-4 filtration unit s/n 19 full tooling assortment chiller and mist collection books and manuals

12

ID	MA36861
Make	Reishauer
Model	RZ 362 A
YOM	2003
Condition	Good Condition
Photo	See Photo
Reishauer CNC Generating style gear grinder Model 362A S/N 75547 New 2003 this Reishauer machine can be inspected under power in plant for a short time only . machine has just become available for sale . Machine specifications are as follows: Technical details max. wheel diameter.360 mm min. module.0,5 max. module.7 root circle diameter.10 mm slide stroke.175 mm clamping length max.515 mm workpiece weight.60 kg number of teeth.10 - 600 pressure angle.10 - 45° helix angle.-/+ 45° grinding worm wheel dia.280 - 350 mm width of grinding worm wheel.84 / 104 mm total power requirement.32 kW weight of the machine.8 ton Machine is equipped with the following: -Reishauer operators pendant and control -Fassler style dressing system -Auto stock dividing -wheel balancing unit -Automatic door -Electrical panel with A/C unit -Oberlin OPF-4 Coolant & Filtration system (can handle additional machines) -Koolant Kooler chilling system for oil -Mist collection System -Assortment of Wheel Flanges -2 table work fixtures for centers -Misc tooling -Books and Manuals Machine was mfg new in 2003 and installed and brought on line in 2004 Note: Machine can be inspected presently in plant under power for a short time only . C-Axis spindle needs to be rebuilt !! Call to set up inspection!!

13

ID	MA36667
Make	Reishauer
Model	RZ362A
YOM	2003/4
Condition	excellent working condition
Photo	See Photo
CNC Generating style Gear Grinder Max Wheel Diameter 360mm Min Module: 0.5 Max Module : 7mm Root Circle Diameter : 10mm Slide Stroke : 175mm Clamping Length Maximum: 515mm Workpiece Weight : 60kg Number Of Teeth : 10 - 600 Pressure Angle : 10 - 45 Helix Angle : -/+45 Grinding worm wheel Dia :280 - 350mm Width of Grinding worm wheel : 84 / 104mm Total power requirement: 32KW Weight of the Machine :8 Ton Machine is Equipped with the Following: Reishauer operators pendent and control Fassler style dressing system Auto Stock Dividing/ wheel balancing unit Automatic Door / Electrical Panel with A/c Unit. Oberlin OPF-4 Coolant & Filtration system (can handle additional machines) Koolant Kooler Chilling system for Oil/ Mist Collection system / Assortment of wheel Flanges 2 Table work Fixtures for Centers/ Misc Tooling Books and Manuals

14

ID	MA36659
Make	Hoefler-Germany
Model	Helix-400
YOM	1999
Condition	Good Condition
Photo	See Photo
7 Axis CNC Grinding Machine (A/B/O/Q/W/Y/X) CNC Höfler BWO 788. Cooling and filtration system. Device for sharpening the grinding wheel. Balancing machine for grinding wheels. Counterholder. Wheel diameter - no more than 400 mm. Wheel width 200 mm. Module - no more than 15. Module - min 0.5. The diameter of the root circle is not less than 10 mm. Helix angle - max. 45°. Grinding wheel dimensions 400 - 174 mm. Drive power - grinding motor 15 kW. Circumferential speed of the grinding wheel: 60 m/s. Dressing speed 0 - 5400 rpm. grinding roller device diam. 160 mm. Grinding spindle speed 0 - 4000 rpm. Distance between centers 600 mm. Center height above work table 330 - 750 mm. Workpiece length - no more than 750 mm. Table diameter 180 mm. Table load 120 kg. Maximum stroke length 260 mm. Maximum profile height 35 / 45 mm. Flange diameter 210/170 mm. The total power consumption is 30 kVA. The weight of the machine is about 8.5 tons.

15

ID	MA36582
Make	Reishauer
Model	RZ400
YOM	2005
Condition	Good Condition
Photo	See Photo
Max Wheel Dia:400mm Gear width: 0-300mm Max Module:8 Min Module: 0.3 Number of Teeth:5-999 Tooth Width(21-grinding slide Travel) : 0-300mm Center Distance:60-700mm Max Helex angle: +/-45 degree work piece weight max:300kg Tip circle diameter:10-400mm CNC Dresser reishauer with 1 set of diamond wheels OPTIONAL : Hoffman Filter/Coolant unit year 2011(extra charge of 26000 eur)

16

ID	MA36570
Make	Reishauer
Model	RZ400
YOM	2001
Condition	Good Condition
Photo	See Photo
max. wheel diameter 400 mm gear width 250 mm max. module 8 min. module 0,5 root circle diameter 10 mm number of teeth 5 - 999 max.helical angle +/- 45 ° weight 12.5 t control Siemens 840 D Machine is in very good condition, test reports available. With cooling unit Novotecnic, Type: FS-106-A

17

ID	MA36569
Make	Kapp
Model	KX1
YOM	2003
Condition	Good Condition
Photo	See Photo
max. wheel diameter 220 mm gear width 150 mm max. module 5 min. module 0,5 number of teeth 1 - 999 max.helical angle +/- 35 ° pitch 0,1 - unendlich mm x-axis 350 mm y-axis 120 mm z-axis 140 mm b-axis -110 / 60 ° c-axis 360 table (Z-axis) 360 . control Siemens 840 D total power requirement 66 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 7,0 x 4,9 x 2,5 m

18

ID	MA36568
Make	Reishauer
Model	RZ150
YOM	2003
Condition	Good Condition
Photo	See Photo
Control CNC Siemens 840D/ Reishauer VM24 max. wheel diameter 150 mm gear width mm max. module 3 min. module 1 weight of the machine ca. 7,2 t dimensions of the machine ca. 2,44 x 1,43 x 2,46 m Operating hours: 99,235 incl. automatic loading system Felsomat, without filter Control CNC Siemens 840D/ Reishauer VM24RZ max. wheel diameter 150 mm gear width mm max. module 3 min. module 1 weight of the machine ca. 7,2 t dimensions of the machine ca. 2,44 x 1,43 x 2,46 m Working hours 98,780 incl. Felsomat automatic loading system

19

ID	MA36567
Make	Liebherr
Model	LCS182
YOM	2000
Condition	Good Condition
Photo	See Photo
Control CNC max. wheel diameter 180 mm gear width mm max. module 5 min. module 1 total power requirement kW weight of the machine ca. 14 t dimensions of the machine ca. 4,5 x 2,84 x 2,8 m min. number of teeth 7 toolpiece turning speed range 4000-10000 U/min tool length 210 mm With tail stock No dressing device Only CBN Largest workpiece - diameter 1 80 mm Module range 1 5 mm smallest number of teeth that can be milled 7 Ambient temperature + 15 0C + 38 0 C Relative humidity max. 90 0/0 at 20 0 C max. 50 0/0 at 38 0 C Operating noise 80 dB (A) Milling head swivel angle 0 ± 35 resolution accuracy degrees Workpiece table load 17 kN More tech. For machine data see work area dimension sheet in group 2.09

20

ID	MA36565
Make	Pfauter
Model	G320
YOM	1995
Condition	Good Condition
Photo	See Photo
Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle of rotation of clamping head A ± 45? Maximum equipment weight 600 N Tailstock center stroke 65 mm Grinding wheel speed 2700 rpm. Grinding wheel mass: Max / min diameter: 400 / 270 mm Width: 104mm Bore: 160mm Machine weight 11700 kg Built-in power (machine only) 72 KVA Voltage and frequency 400 volts x 50 Hz max. wheel diameter 330 mm gear width - mm max. module 7 min. module 0,5 Control Siemens 840 C total power requirement 72 kVA weight of the machine ca. 11,7 t dimensions of the machine ca. m CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm

21

ID	MA36536
Make	Reishauer
Model	RZ150
YOM	2004
Condition	Good Condition
Photo	See Photo
CNC SIEMENS 840 D The machine is complete with roll forming device Hoffmann filter system cooling device cassette loading for automatic loading. the pump the ball screw axle X and Y the encoder, various wear parts.

22

ID	MA35930
Make	Pfauter,German
Model	G300
YOM	1997
Condition	Good Condition
Photo	See Photo
module 0,5-6,0 grinding wheel dimension max 400 grinding wheel dimension min 270 grinding wheel width 104 max grinding wheel hole 160 mm min diam. of part 10 mm max diam of part 300 mm number of teeth 12-600 Z= 200 X= 230 Y= 135 head part catcher: 45 deg max. weight of piece 600 n Tailstock position min. 180 tailstock travel max 650 CNC NUM 760 400 v 40 kw Total weight of machine and accessories: 10.900 kg.

23

ID	MA33795
Make	WMW Niles ,Germany
Model	ZSTZ08
YOM	1988/1990
Condition	Good Condition
Photo	See Photo
Ų max 1000, module 14, working stroke 450 mm. Note : retrofitted in 2007/2008 with CNC Siemens 840D

24

ID	MI7333
Make	Reishauer,Swiss
Model	RZ362A
YOM	1996
Condition	Good working condition
Photo	See Photo \| See Video
Maximum wheel diameter: 360 mm, Maximum modules: 7 mm, Minimum modules: 0.1 mm, Slide stroke: 175 mm, Maximum helix angle: 45, Maximum nos of teeth: 600, Minimum nos of teeth: 6 Maximum work piece weight: 60 kg, Grinding wheel width: 104 mm, Grinding wheel diameter 280-350 mm, Speed of grinding worm when grinding: 1100-2330 U/min, Speed of grinding worm when profiling: 50-95 U/min, Feed per revolution of work piece: 0-3.4 mm, Grinding worm infeed speed: upto 99.9 mm? min/3.93 IPM, Machine weight (approx): 6600 kg, Equipped with: Reshauer CNC controls, PLC: Siemens S5

25

ID	MA33369
Make	Okamoto
Model	400NCS
YOM	2009
Condition
Photo	See Photo
Max. diameter of work piece: 400 mm, Module: 05-5.0, Number of tooth: 12-255 Distance between centers: 200-420 mm, Grinding wheel swivellin g angle: +/-45 degree Wheel size: 350 Dia* 84/104 *Dia 160 7 axis control by NC Machine level of accuracy: DIN 3 class Fassler D.S. A dressing unit Oil- mist collector Work abor vise Dynamic balancing unit Quantity: 3 no

26

ID	MA32626
Make	Oerlikon Maag
Model	OPAL800
YOM	1994
Condition	Good Condition
Photo	See Photo
CNC control Number of controlled axis: 6 Max. gear height: 1000 mm Gear width: 630 mm Max. number of teeth: 999 Max. wheel diameter:50-1000 mm Max. toothing height (max. working machine height) :650 mm. Module:1 - 16. Max. helix angle:+ -45 ° Max. weight of workpiece: 1500 kg Total power requirement: 70 kW Weight of the machine ca.: 17 t

27

ID	MA32613
Make	Gleason USA
Model	TAG400
YOM	1995
Condition	Very good condition
Photo	See Photo
Maximum tip diameter of gear …………………….15.75” (400 mm) Minimum root diameter …………………………….0.40” (10 mm) Maximum face width ground ……………………….8.00” (200 mm) Max./Min. diametral pitch (module) ……………….3.0-50 DP(module 8.0-0.5) Max./Min. number of teeth ground ………………… 600 – 8 Center Distance, Min/Max. ………………………….8”/16.5” (200/400 mm) Helix Angle Max. ……………………………………….+/- 45 Degrees Pressure Angle …………………………………………14.5-30 Degrees Tooth Profile Modifications realized: …………………Tip/Root Relieving, Involute Crowning Tooth Lead Modifications realized: …………………. Lead Relieving, Lead Crowning, Special Lead Relieving, Special Lead Crowning, Conical Taper Gear, Concave Crowning Maximum workpiece & fixture weight ……………….130 lbs.(60 Kg) Max./Min. grinding wheel outside diameter ………….13.8”/10.6”(350/270 mm) Grinding wheel width(s) ……………………………….2.5”/3.3”/3.9”(64/84/104 mm) Grinding wheel bore diameter …………………………6.3”(160 mm) Speeds: S-Axis - wheel rotation (grinding) …………. 1000-2000 RPM Speeds: S-Axis - wheel rotation (dressing) …………. 50-100 RPM Speeds: X-Axis - wheel infeed, maximum ………….118 in/min(3000 mm/min) Speeds: Y-Axis - wheel shift, maximum …………….118 in/min(3000 mm/min) Speeds: Z-Axis - work table Axial, maximum ……….48 in/min(1200 mm/min) Speeds: C-Axis - work spindle rotation, maximum … 250 RPM Speeds: V-Axis - dress cross-feed, maximum …….100 in/min(2500 mm/min) Speeds: U-Axis - dresser infeed, maximum …………48 in/min(1200 mm/min) Speeds: A-Axis - work table swivel, maximum ……. 300 Deg/Min Wheel Rotation Motor (S) …….……………………….Digital AC Spindle Drive, FANUC 5.5 Kw Wheel Infeed Motor (X) ………………………………. Digital AC Servo, FANUC 0.9 Kw Wheel Shift Motor (Y) …………………………………. Digital AC Servo, FANUC 0.9 Kw Work Table Axial Feed Motor (Z) ……………………. Digital AC Servo, FANUC 1.8 Kw Work Spindle Rotation Motor (C) ……………………. Digital AC Servo, FANUC 0.9 Kw Dresser Infeed Motor (U) …………………………….Digital AC Servo, FANUC 0.3 Kw Dresser Cross-feed Motor (V) ……………………….Digital AC Servo, FANUC 0.3 Kw Work Table Swivel Motor (A) ………………………… Digital AC Servo, FANUC 0.9 Kw Hydraulic PumpMotor …………………………………AC 1.5 Kw Lubrication Pump Motor ………………………………AC 0.75 Kw Scavenger Pump Motor ………………………………AC 2.25 Kw Overall floor space required for machine ………….118 x 142”(3000 x 3600 mm) Overall machine height ……………………………….87”(2200 mm) Machine Net Weight ………………………………….17,600 lbs.(8,000 Kg) FEATURES / EQUIPMENT: • FANUC Series 15M CNC control in 8-Axis execution, w/gear grinding software, color CRT with metric and/or inch display, portable electronic hand-wheel for movement of cnc-controlled axes: - Wheel Rotation (S)- Work Spindle Rotation (C) - Wheel Shift (Y) - Work Table Axial Feed (Z) - Wheel Infeed (X) - Dresser Cross Feed (F) - Dresser Infeed (V) - Work Table Swivel (A) • automatic continuous/incremental wheel shifting • infinitely variable wheel speed range of 0-2000 RPM • assorted extra grinding wheel-mounts/flanges • automatic dressing cycle with tooth size compensation • rotary diamond-disc dressing unit (FAESSLER DSA-type) w/assorted diamond discs • automatic wheel balancing unit for maintaining wheel balance on the machine Type SBS Model SB-400, w/monitoring • automatic coolant header positioning • total enclosure guarding w/oil mist exhaust system • auto-gantry loading system thru-top of machine enclosure • temperature regulated hydraulic unit, with cooler-chiller unit for both grinding and hydraulic oil • full complement of electrics (motors controls) w/air-conditioned electrical switch-gear cabinet • misc. wrenches, spanners, operator’s tools • machine leveling shoes • full machine documentation, operator’s manuals, wiring & hydraulic diagrams

28

ID	MA31927
Make	Reishauer,Swiss
Model	RZ362A
YOM	1994
Condition	Good Condition
Photo	See Photo
Maximum Wheel Diameter :360 mm Maximum Module :7 mm Minimum Module:0.1 mm Slide Stroke :175 mm Maximum Helix Angle :±45° Maximum Number of Teeth : 600 Minimum Number of Teeth : 6 Maximum Workpiece Weight :60 kg / 132 lbs Grinding Wheel Width:104 mm" Grinding Wheel Diameter :280-350 mm Speed of Grinding Worm when Grinding:1100-2330 U/min Speed of Grinding Worm when Profiling :50-95 U/min Feed per Revolution of Work Piece : 0-3.4 mm Grinding Worm Infeed Speed, up to :99.9 mm/min / 3.93 IPM Approximate Machine Weight :6600 kg / 14,553 lbs

29

ID	MA31113
Make	Niles
Model	ZSTZ08
YOM
Condition	Good Condition
Photo	See Photo
max. wheel diameter : 800 mm gear width : 265 mm max. module : 14 min. module 2 max.helical angle : 45 ° stroke length max. : 20 - 280 mm no. of strokes : 80 - 350 Hub/min stroke position adjustment : 200 mm workpiece weight : 1500 kg number of teeth : 5 - 400 table diameter : 630 mm weight of the machine ca. : 16 t dimensions of the machine ca. : 5,9 x 3,3 x 2,7 m

30

ID	MA29433
Make	Kapp
Model	Vas482
YOM	1986
Condition	Good Condition
Photo	See Photo
Max. gear diameter: 300 mm, Gear width: 700 mm, No. of teeth: 1-999, Module: 1-12, Max. work piece length: 700 mm, Motor : 25 KW, Net weight: 6200 kg, Control: CNC

31

ID	MA28115
Make	Reishauer
Model	RZ362A
YOM	1994
Condition	Good Condition
Photo	See Photo
Maximum Wheel Diameter: 360 mm, Maximum modules :7 mm, minimum modules: 0.1 mm, Slide Stroke: 175 mm, Maximum Helix Angle: 45, Maximum Number of Teeth: 600, Minimum Number of Teeth: 6, Maximum Work Piece Weight: 60 kg, Grinding Wheel Width: 104 mm, Grinding Wheel Diameter: 280-350 mm, Speed of Grinding Worm When Grinding: 1100-2330 U /min, Speed of Grinding Worm When profiling: 50-95 U / min, Feed per Revolution of Work Piece: 0-3.4 mm, Grinding Worm Infeed speed, up to 99.9 mm /min/3.93 IPM, Approximate Machine Weight: 6600 kg, Equipped With: Reishauer CNC Controls. Dittel MBA2000 balancing controller. Elbaron RH12D Mist Collector. Kato motor generator controls. Free standing Hydraulic Unit. Free standing Electrical Control Cabinet.

top