Category : Gear Machines

Sub-Category : Gear Shaper

Total Machines Found : 123

Select | Machine Details
 
  1
IDMI10368
MakeFellows
Model6A
YOM
ConditionGood Condition
PhotoSee Photo
Max. Length of Rack Cutting - 1225 mm
Max. Module Capacity - 6.3 Module
Max. Stroke Length - 140 mm
Max. Gear Diameter - 458 mm
Stroke Rates - 50 strokes/min to 300 strokes/min
- Equipped with Heavy Duty type Rack Cutting Attachment.
- Motorised Rapid Travel of the Rack Cutting Attachment.
- Machine is in excellent working condition.
 
  2
IDMI10213
MakeFellows
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Dia - 150 mm
Stroke - 50 mm
 
  3
IDMA37630
MakeMAAG
ModelSH250/300S
YOM1985
ConditionGood Condition
PhotoSee Photo
Table :1100φ
Machine Weight :37ton
 
  4
IDMI9806
MakeLorenz
Model
YOM
ConditionGood Condition
PhotoSee Photo
DIA 200MM
MODULE 6
 
  5
IDMI9803
MakeTOS
ModelOH6
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
MAX. GEAR DIAMETER 600 MM
MAX. MODULE 6
MIN. MODULE 1
TABLE DIAMETER 500 MM
MAX. FACE WIDTH OF GEAR CUT (STROKE LENGTH) 125 MM
TABLE BORE DIAMETER 100 MM
TOTAL POWER REQUIREMENT 5 KW
WEIGHT OF THE MACHINE 3500 KG
DIMENSION OF THE MACHINE 2100X1000X2100 MM
 
  6
IDMI9776
MakeCUGIR
ModelMD250
YOM
ConditionGood Condition
PhotoSee Photo
Technical Specification:
Max. dia: 250 mm.
Gear width: 60 mm.
Max. Module: 5.
Table dia: 400 mm.
 
  7
IDMI9725
MakeSTANKO
Model5161
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 12 Module x 1200 mm job diameter
The Max. Stroke Length is 200 mm
 
  8
IDMI9723
MakeTOS
ModelOHO50
YOM
ConditionGood Condition
PhotoSee Photo
Strong Manufacturing, MaintenanceFree, Low Running Cost, High Efficiency.
Technical Specifications:
Max Wheel Diameter….500 mm
Min Wheel Diameter….50 mm
Gear Width…….125 mm
Min Module…….1
Max Module……6
Max Number Of Teeth….300
Min Number Of Teeth….12
Double Strokes Per Min…56 - 355
Main Motor Output….4 KW
 
  9
IDMI9686
MakeTOS
ModelOH4
YOM
ConditionGood Condition
PhotoSee Photo
Max gear dia: 200 mm,
Module: 4,
 
  10
IDMI9627
MakeDemm (Italy)
ModelSI 8/750
YOM
ConditionGood Condition
PhotoSee Photo
Max. Double capacity -8 Module
Max. Gear Diameter -750 MM
Max. Strock Lenghth -150 MM
Strock Rate - 42 strokes/min to 240 strokes/min
Distance between Table to Spindle Body 265 mm
Table Bore 95 mm
Other Information
1 - Operating Manual & Electrical Drawings are available.
2 - Complete with 3 x spare Guides, many Cams, etc.
3 - Complete with Mandrels, Fixtures and other access
4 - Machine is in excellent working condition.
 
  11
IDMI9533
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Table Dia : 800mm
Max. Module : 12mm
Max. Cutter Stroke : 200mm
Max . Cutter Dia : 200mm
Spindle Bore Taper : Morse 5
Axis-To-Axis Distance Between Cutter And Table : Min : 0mm, Max. : 700mm
Range Of Cutter Double Strokes Per Min : 33 - 188mm
 
  12
IDMI9532
MakeDEMM
Model
YOM
ConditionGood Condition
PhotoSee Photo
Bed size 24.5 x 27
Hight 17"
Wheel 39 "
Garari 36"
475000 with moter starter
Gear shaper
750 dia 08 module
 
  13
IDMA36981
MakeFellows,USA
Model
YOM1979
ConditionGood Condition
PhotoSee Photo
Description Fellows 50-8 Hydrostroke Gear Shaper
Equipped with
Automatic Cutter Spindle Elevating
Bidirectional cutter spindle back off
Quick Return Cutter Spindle
Cutter Spindle Positioning
Remote Stroke Positioning
Infinitely Variable Stroking Speed (12-500 SPM)
Infinitely Variable Infeed
Infinetyl Variable Rotary feed
Work Spindle Rapid Rotational Drive
Three Cut Cycle
Chip Conveyor
Hydrostroke Hydraulic Power and Control Unit
Lubrication System
 
  14
IDMI9450
MakeLorenz
ModelSV00
YOM
ConditionGood Condition
PhotoSee Photo
Max. Wheel dia: 180 mm.
Gear width: 50 mm.
Max. Module: 4.
Max. Stroke: 55 mm.
Table dia: 160 mm.
Table bore dia: 75 mm.
No. Of strokes: 380 – 600 Hub/min.
Approx. weight of the machine: 2500 Kg
 
  15
IDMA36848
MakeLorenz
ModelS7/800
YOM
ConditionGood Condition
PhotoSee Photo
Min-Max working Diameter :0-8000mm
Module : 7
Stroke :160mm
Table Diameter :650mm
 
  16
IDMA36789
MakeFellows
Model10-2
YOM
ConditionGood Condition
PhotoSee Photo
Max. External & Internal Pitch Dia. 254 MM
Max. Face Width, External. 50MM
Max. Diametral Pitch, Spur. 4 DP
Max. Diametral Pitch, Helical.5 DP
Bore through work spindle. 90MM
Spindle Diameter. 90MM
Distance between work table and cutter Spindle.254MM
Max. Helix Angle with Standard Guides. 45 degrees
Max. OD of Fixture. 480MM
Dimensions.302 L X 246H x 135 W
Approx. weight. 7,000 KG
2 machines.
 
  17
IDMI9146
MakeLorenz
ModelSJV00
YOM
ConditionGood Condition
PhotoSee Photo
TYPE OF CONTROL CONVENTIONAL
MAX. JOB DIAMETER 8dia
GEAR WIDTH 50mm
MAX. MODULE 4
MIN. MODULE 0.5
STROKE 55mm
TOTAL POWER REQUIREMENT 7 K/W
WEIGHT OF THE MACHINE 2 Ton
DIMENSION OF THE MACHINE L: 1200mm x W: 1200 x H: 1900mm
 
  18
IDMI9103
MakeMaxicut
ModelMaxicut2A
YOM
ConditionGood Condition
PhotoSee Photo
max Gear Diameter:180mm
Max Module: 4 Module
Max Stroke Length :50mm
Spindle Diameter : 70mm
Angle of Inclination: Changeable.
Complete with Change Gears.
 
  19
IDMI9102
MakeHMT,India
ModelFS150
YOM
ConditionGood Condition
PhotoSee Photo
Table Dia: 200mm
Module capacity : 6 Modules
Strock Length :150mm
Height ;150mm
with change Gears
 
  20
IDMI9057
MakeDrummond
ModelMaxicut2A
YOM1962
ConditionGood Condition
PhotoSee Photo
Max. Gear Diameter – 200 mm
Max. Module – 4 module
Max. Stroke Length – 50 mm
Spindle Diameter – 70 mm
 
  21
IDMI8975
MakeSykes,England
ModelV10B
YOM
ConditionGood Condition
PhotoSee Photo
Diameter: 300mm
Stroke: 90mm
 
  22
IDMA36509
MakeRussian
Model5M150P
YOM1987
ConditionGood Condition
PhotoSee Photo
The largest diameter of the cut wheels: 800 mm.
The largest module: 12 mm.
Overall dimensions of the machine: 4385x1860x3300
Machine weight: 10800
it was practically not used. All electrical has been replaced.
 
  23
IDMA36505
MakeStanko-Russia
Model5A140
YOM1988
ConditionGood Condition
PhotoSee Photo
max. gear dia. 500 mm,
max module 8,
dim. 1975 x 1690 x 2510 mm,
weight 7.5 t,
change gears,
operation manual
 
  24
IDMA36183
MakeSTANKO
Model5B150
YOM1977
ConditionGood Condition
PhotoSee Photo
Max diameter of gears cut 800 mm
Max module 12 mm
Max cutter stroke 200 mm
Saddle indexing gear diameter: 360 mm
Axes distance (tool and table) 0-700 mm
Largest tool diameter 200 mm
Cutter arbor diameter 44.443 mm
Taper M5
Table diameter 800 mm
Distance from floor to table 870 mm
Indexing gear diameter: 762 mm
Table hole diameter: 120A mm
Double s.p.m. 33-188 mm
Range of table feed rates per cutter double stroke:
-Circular 0.2-1.5 mm
-Radial 1-5.4 mm
Table rapid rotation speed: 1.7 rpm
Table rapid travel speed: 137 mm/min
Cutter rapid rotation speed: 3 rpm
Main electric motor power: 4.8; 5.7; 7.5 kW
Dimension: 3100x1800x3500 mm
Weight: 10200 kg
 
  25
IDMA36086
MakeLorenz
ModelS8/630
YOM
ConditionGood Condition
PhotoSee Photo
Max. wheel diameter: 630 mm
Gear width: 180 mm
Max. module: 8
Min. module: 1
Table bore diameter: 160 mm
Number of strokes: 47 – 300 strokes/min
Diameter of shaper cutter: 125 mm
Daylight: 100 – 330 mm
Workpiece diameter: 0 – 750 mm
Stroke length max.: 200 mm
Total power requirement: 12 kW
Weight of the machine: ca. 5,8 t
Dimensions of the machine: ca. 2,5 x 2,1 x 3,1
 
  26
IDMA35948
MakePai Demm
ModelDS 300
YOM25/01/2012
ConditionGood Condition
PhotoSee Photo
SIEMENS SYSTEM 3
Max diam. 300 mm
max module 8
max helix angle +45 deg
max. face width 75 nm.
max vertical travel of head slide 170 mm
max spm 1800
 
  27
IDMA35942
MakeFellows
Model
YOM
ConditionGood Condition
PhotoSee Photo
SHAPER 1900
 
  28
IDMA35941
MakeSykes,England
ModelV10
YOM
ConditionGood Condition
PhotoSee Photo
Max External Gear 241mm
Max Internal Gear 150mm
Table Diameter 240mm Table Diameter 254mm
Stroke Length 100mm, Max Pitch 4DP
Cutter Stokes Variable 55-500 s p m,
Machine Size 121cm x 163cmx218cm
height Approximate Weight 3,250kgs
 
  29
IDMA35932
MakeLorenz
ModelSRJV
YOM
ConditionGood Condition
PhotoSee Photo
Max. module: 4 mm
Max. diameter: 180 mm.
Max. working height: 45 mm.
 
  30
IDMA35931
MakeLorenz
ModelSN4
YOM
ConditionGood Condition
PhotoSee Photo
Module 4
Max. workpiece diameter 180 mm
workpiece width 60 mm
External workpiece diameter 210 Mm
Max. stroke length 72 mm
Speed range 236…900 Corse al min.
machine weight 3600 Kg
 
  31
IDMA35711
MakeLorenz
ModelLS1250
YOM
ConditionGood Condition
PhotoSee Photo
Max. module: 14 mm,
Max. dia: 725 mm,
Min number of teth: 2 n,
Tool
Max. admitten head dia: 305 mm,
Max. length: 330 mm,
Cone hob spindle: 6 morse,
Spindle dia: 22/27/32/40/50/60/80 mm,
Axlal slide: 575 mm,
Shifting hobbing head: 150 mm,
Workpiece table
External dia: 698 mm,
Hole bone: 270 mm,
Machine dimensions
Length: 3000 mm,
Width; 1520 mm,
Height; 3060 mm,
Weight: 9000 kg,
Rev Speed
Tool speed revelation: 25-140 rpm,
Table speed revolution; 20 rpm,
CNC: Siemens Sinumerik 840D
 
  32
IDMI8118
MakeFellows
Model6A
YOM
ConditionGood Condition
PhotoSee Photo
Max pitch diameter (External).18"
Max pitch diameter (Internal).18"
Max face width, external & internal.5"
Max diametrical pitch spur.4 DP
Max diametrical pitch helical.6 DP
Bore through work spindle.2.875"
Cutter spindle diameter.2.875"
Max helix angle with proper guide.30 deg
Stroking speeds.50-300 SPM
Dimensions (L x H x W).63" x 77" x 48"
Machine net weight, approx.6,800 lbs

Machine Equipped With:
5" Stroke
4" Riser
with rack cutting attachment
Misc change gears
 
  33
IDMI8023
MakeStankoimport
Model5M150
YOM
ConditionGood Condition
PhotoSee Photo
Table size - 800 mm
Max. Stroke/Vertical travel : 200 mm
Max. Gear diameter : 1000 mm
Max . Module : 12
The Machine is complete in all its parts, std accessories
 
  34
IDMI8022
MakePama Italy
ModelSL801
YOM
Conditionexcellent working condition
PhotoSee Photo
Max.Gear diameter : 285 mm
Max. Module : 5
Vertical travel (stroke) : 50 mm
The Machine is C omplete in all its parts std accessories
 
  35
IDMI8021
MakeLorenz
ModelS5
YOM
ConditionGood Condition
PhotoSee Photo
Max. Workpiece dia : 500 mm.
stroke : 120 mm
machine weight : 4000 kg
The Machine is Complete Of All Change Gears and Vice
 
  36
IDMA35352
MakeLorenz
ModelLS150
YOM1980
ConditionGood Condition
PhotoSee Photo
External gears, max. Ø150 mm (or more)
Internal gears, max workpiece Ø, approx. 280 mm
Gear width, max. 42 mm
Module, max. 0.5 - 3
Length of stroke 0 – 50 mm
Adjustment of stroke 0 – 70 mm
Distance between shaper spindle and body of machine 250 mm
Spindle internal table, approx. 45 mm
Strokes, roughing / finishing 450 – 1,250 / 2,500 / min
Table Ø 250 mm
Table bore 100 mm
Distance between table and shaper head, approx. 320 mm
Axial travel of workpiece slide, approx. 285 mm
Feed range, tooth depth 0.01 – 0.063 mm/stroke
Rotary feed 0.125 – 3,150 mm/stroke
Total electrical load, approx. 10 kW - 380 V - 50 Hz
Weight 6,000 kg
Accessories / Special Features: Built-in hydrostatic straight guide.
Built-in raiser plate for raising the shaper head 130 mm.
Hydraulic counter bracket (height-adjustable tailstock, approx. 150 mm) and hydraulic universal workpiece clamping device in the table for workpieces with length of up to approx. 400 mm, probably more by reversing the tailstock.
Automatic change of number of strokes and automatic feed change for roughing and finishing work, in up to 7 steps.
Automatic and motor-driven shaper stroke fixing in the upper position after work is finished.
Separate switch and control cabinet. * Separate hydraulic unit.
Coolant equipment with chip conveyor and chip collection. * Vibration elements.
Various change gears. * Holders for shaper tools. * Completely covered working area, etc.
 
  37
IDMI7987
MakeMaxicut
Model
YOM
ConditionGood Condition
PhotoSee Photo
Dia-180 mm
Module-4
 
  38
IDMI7977
MakeSykes,England
ModelV10B
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
CAPACITY
Stroke Length : 0-63.5 mm on standard machine
upto 101.6 mm (subject to approval of application)
D.P.: 64-4 on standard machine
3 subject to approval of application
Max. external Gear (101.6 mm cutter) 241.3 mm diameter approx.
depending on pitch (i.e. 177.8 mm centres cutter/work
Max. internal gear (76.2 mm cutter) 152.4 mm diameter approx.
Depending on pitch (i.e. 38.1 mm max. centres cutter/work
Cutter spindle locating diameter 1.25 -.0001 / 1.25 -.0002
SPEEDS – Strokes, infinitely variable
80-720 standard 50 cycle machine
95-854 high speed 50 cycle machine
55-499 low speed 50 cycle machine
86-774 standard 60 cycle machine
96-860 high speed 60 cycle machine
67-602 low speed 60 cycle machine
Radial feed, infinitely variable ( 101.6 cutter) 0.6858 mm – 0.1143 mm
Saddle infeed per stroke, variable, 0.0127 mm, 0.0254 mm, 0.0381 mm, 0.0508 mm, 0.0635 mm
Saddle rapid traverse rate 635 mm per minute
Motors 50 cycle 60 cycle
Cutter 5 hp - 1400 rpm 5 hp – 1720 rpm
Hydraulic 0.95 hp – 2900 rpm 0.95 hp – 3400 rpm
Truing Motor 1.5 hp – 960 rpm 1.5 hp – 1160 rpm
(When supplied)
Coolant Motor 0.5 hp – 1440 rpm 0.5 hp – 1720 rpm
DIMENSIONS
Floor Area, including allowances for doors 2844.8 mm wide x 2641.6 mm deep
Overall height 2184.4 mm, Width 1200.15 mm, Depth 1625.6 mm
Weight – 3000 kgs
 
  39
IDMA35294
MakeFellows
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Dati della Fellows 106 inch
Max external working Ø 2700mm
Working width: 200 mm
Modul from 0,6 up to 14
 
  40
IDMA35282
MakeTos Czech
ModelOHA 12A
YOM
ConditionGood Condition
PhotoSee Photo
The largest diameter of the head on a cylindrical gear wheel with external gearing, mm .. 125
The smallest diameter of the head on a cylindrical gear with external gear, mm .. 20
The largest outer diameter of the workpiece to be processed, mm . 200
The largest module of the gearing of the cut wheel, mm . 4
The largest width of the gearing of the grooved wheel, mm . 35
The largest width of the cut gear wheel with continuously corrected gearing, mm .. 20
The greatest distance from the reference plane of the tool on the slider from the table surface, mm . 215
The smallest distance from the reference plane of the tool on the slider from the table surface, mm . 25
Nominal tool diameter, mm . 100
The greatest angle of inclination of the sides of the tool of nominal diameter . 45 degrees
The largest diameter of the leg of the cut wheel, mm . 125
The largest outer diameter of the rim of the cut wheel with internal gearing, mm . 200
The greatest distance from the axis of the slider to the axis of the table when chiselling the external gearing, mm . 155
The greatest distance from the axis of the slider to the axis of the table when chiselling the internal gearing, mm . 50
The largest number of teeth of the cut wheel . 150
The smallest number of teeth of the cut wheel . 12
Table diameter, mm . 125
Table hole diameter, mm . 50
Hole depth, mm . 700
Distance from the working surface to the base of the machine, mm . 800
Tool holder taper . shortened Morse 4
Tool hole diameter, mm . 44.45
The greatest weight of the workpiece including the clamping device, kg . 100
Weight machine — 3000kg
Quantity: 18
 
  41
IDMA35275
MakeRussian
Model5M161
YOM
ConditionGood Condition
PhotoSee Photo
Cutting diameter - 1250mm
Modul - 12
Weight - 11000 tones
 
  42
IDMA35271
MakeStanko-Russia
Model
YOM
ConditionGood Condition
PhotoSee Photo
Cutting diameter - 1250mm
Modul - 12
Weight - 11000 tones
 
  43
IDMA35270
MakeRussian
Model5M150
YOM
ConditionGood Condition
PhotoSee Photo
There are 2 such machines available
Cutting diameter - 800mm
Modul - 12
Weight - 10000 kg
 
  44
IDMA35230
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Gear diameter - 800mm
Modul - 12
Table diameter - 800mm
Dimensions - 3100x1800x3500mm
Weight - 10200kg
 
  45
IDMA35222
MakeTos Czech
ModelOHA12
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter of gear wheel with external gears : 120 mm
Max. diameter of gear wheel with internal gears : 120 mm
Max. diameter of workpiece : 120 mm
Module: 0.5-4 mm
Bh9s3cbqw7
Gear width: 35 mm
Nominal tool diameter: 100mm
Table diameter: 125 mm
Engine power: 3/2.2 kW
Pump performance: 60 l / min-1
Machine dimensions: 1620 x 1690 x 1110 mm
Machine weight: 3 000 kg
Quantity:6 nos
 
  46
IDMA35200
MakeTos Czech
ModelOHA50A
YOM2009
ConditionGood Condition
PhotoSee Photo
Outer diameter - 500mm
Modul - 8
Main drive power - 17kW
Table capacity - 300kg
Dimensions - 3500x2800x2950kg
Weight - 7200kg
 
  47
IDMA35196
MakeFellows,UK
ModelSR500-100/24-4
YOM
ConditionGood Condition
PhotoSee Photo
Maximum pitch diameter - external: 508mm,
Maximum pitch diameter - internal: 508mm
Maximum diametrical pitch - spur: 6 mod,
Maximum diametrical pitch - helical: 5 mod,
Maximum face width: 102mm,
Maximum helix angle (using 5" cutter): 45 degrees,
Maximum OD of fixture: 686mm
WITH HELIX CAMS
 
  48
IDMI7854
MakeFellows
Model6A
YOM
Condition
PhotoSee Photo
Maximum Diameter 500 mm
Material Steel
Voltage 220
Capacity 500 mm
Gear Diameter 500 mm
Max Module 8
Stroke: 125 mm Size of table: 500 mm Module: 6
 
  49
IDMI7853
MakeTOS
ModelOHO20
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel diameter: 200 mm
Min wheel diameter: 14 mm
Gear width: 50 mm
Min module: 1
Max module: 4
Dimension of cutter:
-Standard diameter: 75 mm
-Max diameter: 100 mm
No of ram strokes per min: 200-630
Max work-piece weight: 10 kg
Hole in clamping table: 38 mm
Main motor output: 1.5 kW
Machine dimensions: 1350x950x1720 mm
Machine weight: 1800 kg
 
  50
IDMI7852
MakeSTANKO
Model5A140n
YOM
ConditionGood Condition
PhotoSee Photo
Manufactured by Komsomolec (Russia)
Max work piece diameter, mm 600
Module 8
Table area 600 mm
Distance between table and spindle 120.270 mm
Table gap diameter 110 mm
Spindle taper morse 5
Spindle speed 55.560 rpm
Spindle travel 125 mm
Round feed range 6.590 mm/min
Radial feed range 0,02.0,2 mm/double stroke
Machine dimensions 1975 x 1690 x 2510 mm
Machine weight 7500 kg
Complete Set of Change Gears.
 
  51
IDMI7814
MakeSykes,England
ModelV6
YOM
ConditionGood Condition
PhotoSee Photo
Diameter: 150mm
Stroke: 25mm
 
  52
IDMA34861
MakeRussian
Model5M150F3
YOM
ConditionGood Condition
PhotoSee Photo
Modul - 12
Gear Diameter - 800 MM
Cutter stroke - 200 MM
Dimension - 3100 x 1800 x 3500 MM
Weight - 10200 KG
 
  53
IDMA34849
MakeStanko-Russia
Model5M161
YOM2002
ConditionGood Condition
PhotoSee Photo
Wheel's Diameter - 160.1250 MM
Modul - 12
Number of Teeth - 12.200
Weight - 10450 KG
 
  54
IDMA34848
MakeRussian
Model5M150
YOM
ConditionGood Condition
PhotoSee Photo
Change gears aren't available as the Machine was used for the production of one detail only
Modul - 12
Gear Diameter - 800 MM
Cutter Stroke - 200 MM
Dimensions - 3100 x 1800 x3500 MM
Weight - 10200 KG
 
  55
IDMA34846
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Gear Diameter - 800 MM
Modul - 12
Table Diameter -800 MM
Dimensions - 3100 x 1800 x 3500 MM
Weight - 10200 KG
 
  56
IDMI7779
MakeLorenz
ModelLS200
YOM
ConditionGood Condition
PhotoSee Photo
with Tailstock
Diameter 200 mm
Max Stroke speed 1250
Machine electrically refurbished with new panel
3 axis retrofitted - Table, Vertical, Hob shift
Change gears available
 
  57
IDMA34746
MakeKlin
Model51A125PF2
YOM1988
ConditionGood Condition
PhotoSee Photo
Max wheel diameter: 1250mm
Module + 12
Motor power :7.5 KW
 
  58
IDMA34570
MakeRussian
Model5B161
YOM
ConditionGood Condition
PhotoSee Photo
Work piece's diameter - 1250mm
Modul - 12
Tooth's length - 160mm
Quantity of teeth - 12.200
Dimensions - 3100x1800x3500mm
Weight - 10400kg
 
  59
IDMA34549
MakeSTANKO
Model5M150
YOM
ConditionGood Condition
PhotoSee Photo
Modul - 12
Gear diameter - 800mm
Cutter stroke - 200mm
Cutter diameter - 200mm
Dimensions - 3100x1800x3500mm
Weight - 10200kg
 
  60
IDMA34515
MakeStanko-Russia
Model5M161
YOM2007
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 1250 mm,
Min. work piece diameter : 160 mm,
Module : 12,
Spindle stroke : 200 mm,
Spindle double strokes range : 10.212 spm,
Spindle taper : Morse 5,
Table diameter : 1000 mm,
Distance between table surface and spindle : 140.340 mm,
Distance between table axis and spindle axis : 50.700 mm,
Table turning speed : 1,7 rpm,
Main drive power : 10 kW,
Machine overall dimensions : 3150 x 1780 x 3300 mm,
Machine weight : 10650 kg.
 
  61
IDMA34393
MakeLorenz
ModelSN4
YOM
ConditionGood Condition
PhotoSee Photo
Module 4
Max. workpiece diameter 180 mm
workpiece width 60 mm
External workpiece diameter 210 Mm
Max. stroke length 72 mm
Speed range 236…900 Corse al min.
machine weight 3600 Kg
 
  62
IDMA34359
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of gears cut : 800 mm,
Max module : 12 mm,
Max cutter stroke : 300 mm,
Max cutter diameter : 200 mm,
Saddle indexing gear diameter : 360 mm,
Cutter arbor diameter : 44.443 mm,
Spindle bore taper : No. 5 Morse,
Axis-to-axis distance between cutter and table :-
-Min : 0 mm,
-Max : 700 mm,
Faceplate diameter : 800 mm,
Distance from floor to faceplate : 870 mm,
Indexing gear diameter : 762 mm,
Table hole diameter : 120 A mm,
Range of cutter double strokes per min : 33-188 mm,
Range of table feed rates per cutter double stroke :
-Circular : 0.2-1.5 mm,
-Radial : 1-5.4 mm,
Table rapid rotation speed : 1.7 rpm,
Table rapid travel speed : 137 mm/min,
Cutter rapid rotation speed : 3 rpm,
Main electric motor power : 4.8; 5.7; 7.5 kW,
Dimension : 3100 x 1800 x 3500 mm,
Weight : 10200 kg.
 
  63
IDMA34357
MakeStanko-Russia
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max internal and external Ø: 1250 mm, working width : 200 mm. The machine is underpower
 
  64
IDMA34356
MakeFellows
Model106
YOM
ConditionGood Condition
PhotoSee Photo
Max internal and external Ø : 2700mm, working width: 200 mm. The machine is under power and complete with accessories and tools.
 
  65
IDMA34352
MakeSTANKO
Model
YOM
ConditionGood Condition
PhotoSee Photo
MODEL : 5M150
Max. diameter of gears cut: 800 mm
Max. module: 12 mm
Max. cutter stroke: 200 mm
Max. cutter diameter: 200 mm
Saddle indexing gear diameter: 360 mm
Cutter arbor diameter: 44.443 mm
Spindle bore taper: No. 5 Morse
Axis-to-axis distance between cutter and table:
-Min.: 0 mm
-Max.: 700 mm
MODEL : 5B150
Faceplate diameter: 800 mm
Distance from floor to faceplate: 870 mm
Indexing gear diameter: 762 mm
Table hole diameter: 120A mm
Range of cutter double strokes per min: 33-188 mm
Range of table feed rates per cutter double stroke:
-Circular: 0.2-1.5 mm
-Radial: 1-5.4 mm
Table rapid rotation speed: 1.7 rpm
Table rapid travel speed: 137 mm/min
Cutter rapid rotation speed: 3 rpm
Main electric motor power: 4.8; 5.7; 7.5 kW
Dimension: 3100x1800x3500 mm
Weight: 10200 kg
 
  66
IDMA34209
Make
Model5236P
YOM1985
ConditionGood Condition
PhotoSee Photo
Accuracy class of the machine according to GOST 8-82 and GOST 659-78 in P
The largest circumferential modulus of the wheel to be cut, mm 0.5.2.5
 
  67
IDMA34118
MakeSTANKO
Model5M150
YOM1984
ConditionGood Condition
PhotoSee Photo
Max. job diameter: 800 mm,
Module: 12,
Max. gear diameter: 800 mm,
Table diameter: 800 mm,
Max. gear width:160 mm,
Outer gearing:1250 mm,
Inner gearing: 1500 mm,
Distance between table surface and spindle: 155.355 mm,
Max. spindle stroke: 200 mm,
Distance between table axis and spindle axis: 0.700 mm,
Table turning speed: 1,7 rpm,
Main drive power: 10 kW,
Machine overall dimensions: 3151 x 1780 x 3300 mm,
Machine weight: 10200 kg
 
  68
IDMI7471
MakeLorenz
ModelSN4
YOM1985
ConditionGood Condition
PhotoSee Photo
Diameter max: 180 mm
Module 4
Cutting height: 45 mm
Course: 0 - 52 mm
Number of strokes / min: 355-630
Table diameter: 160 mm
Table bore: 75 mm
 
  69
IDMA34047
MakeRussian
Model5A150
YOM
ConditionGood Condition
PhotoSee Photo
Gear diameter - 800 mm
Modul - 12
Dimensions - 3100x1800x3500 mm
Weight - 10200 kg
 
  70
IDMA33902
MakeRussian
Model5B150
YOM1968
ConditionGood Condition
PhotoSee Photo
Gear diameter - 800mm
Modul - 12
Table diameter - 800mm
Dimensions - 3100x1800x3500mm
Weight - 10200kg
 
  71
IDMA33796
MakeMaag Switzerland
ModelSH180/300
YOM
ConditionGood Condition
PhotoSee Photo
Max gear diameter : 3000,
Max modul : 20,
Gear width : 430 mm,
Max.helical angle : 45 degree,
No. of teeth : 10 - 400,
Clamping table diameter : 1000 mm,
Table load capacity : 8000 kg,
Ram stroke :-
Adjustable min/max : 40 - 450 mm,
Strokes of ram per min. 4,5 - 107,
Main drive motor : 15 kW,
Max. distance table,
Ram : 1300 mm,
Total power requirement ca. : 20 kW,
Weight of the machine ca. : 18-23 t.
 
  72
IDMI7367
MakeLorenz
ModelLS150
YOM
ConditionGood Condition
PhotoSee Photo
diameter 150 mm,
gear width 42 mm,
max. module 3 ,
max. workpiece dia. (internal machining) 280 mm ,
max. gear width (internal machining) 42 mm ,
table diameter 250 mm ,
table bore diameter 100 mm ,
ram stroke range 0 - 50 mm ,
stroke position adjustment 0 - 70 mm ,
distance table/ram 115 - 185 mm ,
no. of strokes 265 - 1250 Hub/min ,
main drive 3 / 4,2 kW ,
down feeds 0,0007 - 0,339 mm/Hub ,
gear feeds (infintely stepless variable) 0,0027 - 38,5 mm/Hub ,
weight of the machine ca. 5,7 t ,
dimensions of the machine ca. 2,56 x 2,10 x 2,00 m
 
  73
IDMA33780
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of gears cut : 800 mm,
Max module : 12 mm,
Max cutter stroke : 300 mm,
Max cutter diameter : 200 mm,
Saddle indexing gear diameter : 360 mm,
Cutter arbor diameter : 44.443 mm,
Spindle bore taper : No. 5 Morse,
Axis-to-axis distance between cutter and table :-
-Min : 0 mm,
-Max : 700 mm,
Faceplate diameter : 800 mm,
Distance from floor to faceplate : 870 mm,
Indexing gear diameter : 762 mm,
Table hole diameter : 120 A mm,
Range of cutter double strokes per min : 33-188 mm,
Range of table feed rates per cutter double stroke :
-Circular : 0.2-1.5 mm,
-Radial : 1-5.4 mm,
Table rapid rotation speed : 1.7 rpm,
Table rapid travel speed : 137 mm/min,
Cutter rapid rotation speed : 3 rpm,
Main electric motor power : 4.8; 5.7; 7.5 kW,
Dimension : 3100 x 1800 x 3500 mm,
Weight : 10200 kg.
 
  74
IDMA33530
MakePfauter
ModelPE500S
YOM1988
ConditionGood Condition
PhotoSee Photo
Workpiece data :
Module Max : 10mm
Largest Diameter : 500mm
Smallest number of millable teeth : 4
Tool Specification :
Max diameter of tip circle : 210 mm
Length max 240mm
Machine data :
Taper milling arbor : SK50
Radial slide travel X axis approx : 380mm
Axial Slide travel Z-axis : 400 mm
Milling head swivel angle : +25;-45
Table diameter : 450mm
table bore : 125mm
Feeds and speed range
X,Z axis : 1-1500 mm/min
Y-axis : 1-750mm/min
Tool speed : 80-340 rpm
Table speed : 0.5-22rpm
General data :
380 V; 50 Hz; 70 kVA
Control : Siemens SINUMERIK 3M
 
  75
IDMA33517
MakeSTANKO
ModelSV150
YOM1968
ConditionGood Condition
PhotoSee Photo
Max wheel diameter : 800mm
Module + 12
Motor power : 7.5 KW
 
  76
IDMI7266
MakeImported
Model
YOM
ConditionGood Condition
PhotoSee Photo
Machining sizes: 600 mm x 350 mm x 250 mm Height
 
  77
IDMA33407
MakeTOS
ModelOHA50A
YOM
ConditionGood Condition
PhotoSee Photo
Max Wheel Diameter :- 500 mm
Min Wheel Diameter :- 50 mm
Gear Width:- 125 mm
Min Module :- 1.5
Max Module :- 8
Max number of teeth :- 300 mm
Diameter Clambing table :- 500 mm
Table Bore Diameter :- 500 mm
Total Power requirement:- 15 kva
Machine weight :- 5200 kg
 
  78
IDMA33325
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of gears cut : 800 mm,
Max module : 12 mm,
Max cutter stroke : 300 mm,
Max cutter diameter : 200 mm,
Saddle indexing gear diameter : 360 mm,
Cutter arbor diameter : 44.443 mm,
Spindle bore taper : No. 5 Morse,
Axis-to-axis distance between cutter and table :-
-Min : 0 mm,
-Max : 700 mm,
Faceplate diameter : 800 mm,
Distance from floor to faceplate : 870 mm,
Indexing gear diameter : 762 mm,
Table hole diameter : 120 A mm,
Range of cutter double strokes per min : 33-188 mm,
Range of table feed rates per cutter double stroke :
-Circular : 0.2-1.5 mm,
-Radial : 1-5.4 mm,
Table rapid rotation speed : 1.7 rpm,
Table rapid travel speed : 137 mm/min,
Cutter rapid rotation speed : 3 rpm,
Main electric motor power : 4.8; 5.7; 7.5 kW,
Dimension : 3100 x 1800 x 3500 mm,
Weight : 10200 kg.
 
  79
IDMA33134
MakeLorenz
ModelSNJ5
YOM
ConditionGood Condition
PhotoSee Photo
Maximum diameter : 500mm
Maximum modul : 5mm
G Max :120 kp
 
  80
IDMA33065
MakeSykes,England
ModelS6
YOM
ConditionGood working condition
PhotoSee Photo
Maximum pitch: 6 DP (4,2 Mod),
Standard stroke: 50.8 mm (2"),
Maximum helix angle: 45 degrees,
Blank diameter - External gears: 180 - 254 mm (7-10"),
Maximum work to cutter centre distance: 203.2 mm (8"),
Minimum work to cutter centre distance: 88.9 mm (3.5"),
Nominal spindle diameter: 88.9 mm (3.5"),
Cutter spindle location (standard): 44.45 mm (1.75"),
Maximum cutting speed: 150 ft/min,
Maximum cutter to work ratio: 5:1,
Tailstock - Minimum working height: 276 mm (10-7/8"),
Tailstock - Maximum working height: 346 mm (13-5/8"),
Infeed:-
Type: Hydraulic,
Range - Infeed per stroke: .0005 - .002",
Number of cuts: 1,2 or 3,
Column drop off: Hydraulic,
 
  81
IDMA32885
MakeSTANKO
Model5M150
YOM1987
ConditionGood Condition
PhotoSee Photo
Max. diameter of gears cut: 800 mm
Max. module: 12 mm
Max. cutter stroke: 200 mm
Max. cutter diameter: 200 mm
Saddle indexing gear diameter: 360 mm
Cutter arbor diameter: 44.443 mm
Spindle bore taper: No. 5 Morse
Axis-to-axis distance between cutter and table:
-Min.: 0 mm
-Max.: 700 mm
Faceplate diameter: 800 mm
Distance from floor to faceplate: 870 mm
Indexing gear diameter: 762 mm
Table hole diameter: 120A mm
Range of cutter double strokes per min: 33-188 mm
Range of table feed rates per cutter double stroke:
-Circular: 0.2-1.5 mm
-Radial: 1-5.4 mm
Table rapid rotation speed: 1.7 rpm
Table rapid travel speed: 137 mm/min
Cutter rapid rotation speed: 3 rpm
Main electric motor power: 4.8; 5.7; 7.5 kW
Dimension: 3100x1800x3500 mm
Weight: 10200 kg
 
  82
IDMA32884
MakeSTANKO
Model5M161
YOM1986
ConditionGood Condition
PhotoSee Photo
Gear teeth type: external and internal straight teeth
Min diameter of wheels: 160 mm
Max diameter of wheels: 1250 mm
Max module: 12 mm
Distance from cutter axis to the table axis: 60-630 mm
Max toothing width: 160 mm
Number of teeth: 12-200
Distance from slider’s face to the surface: 150-550 mm
Dimensions: 3100x1800x3500 mm
Weight: 10450 kg
 
  83
IDMA32839
MakeLorenz
ModelSN4
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel’s diameter - 180 mm
Gear width - 45 mm
Max module - 4
Min module - 0,5
Stroke length max - 0 - 52 mm
Table diameter - 160 mm
Table bore diameter - 75 mm
Dimensions of the machine - 2300 x 1500 x 2360 mm
Rack milling length max - 560 mm
Power capacity - 6 kW
Weight of the machine - 2.500 kg
 
  84
IDMA32599
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of gears cut : 800 mm,
Max module : 12 mm,
Max cutter stroke : 300 mm,
Max cutter diameter : 200 mm,
Saddle indexing gear diameter : 360 mm,
Cutter arbor diameter : 44.443 mm,
Spindle bore taper : No. 5 Morse,
Axis-to-axis distance between cutter and table :-
-Min : 0 mm,
-Max : 700 mm,
Faceplate diameter : 800 mm,
Distance from floor to faceplate : 870 mm,
Indexing gear diameter : 762 mm,
Table hole diameter : 120 A mm,
Range of cutter double strokes per min : 33-188 mm,
Range of table feed rates per cutter double stroke :
-Circular : 0.2-1.5 mm,
-Radial : 1-5.4 mm,
Table rapid rotation speed : 1.7 rpm,
Table rapid travel speed : 137 mm/min,
Cutter rapid rotation speed : 3 rpm,
Main electric motor power : 4.8; 5.7; 7.5 kW,
Dimension : 3100 x 1800 x 3500 mm,
Weight : 10200 kg.
 
  85
IDMA32423
MakeStanko-Russia
Model5B150
YOM1977
ConditionGood Condition
PhotoSee Photo
NEW ELECTRICS and RETROFITTED
- change gears
- change gears (not full set)
- largest gear diameter: 800 mm
- largest modul: 12
- table diameter: 800 mm
- table bore: 120A mm
- axes distance (tool and table): 0-700 mm
- largest tool diameter: 200 mm
- stroke: 200 mm
- daylight 355 mm
- spindle taper: Morse Nr.5
- arbor diameter: 44,443 mm
- double-strokes per minute: 33.188
- table-move per double-stroke: radial move 1.5,4 mm (Radialvorschub)
- table-move per double-stroke: rotationl move 0,2.1,5 mm (Kreisvorschub)
- main drives: 4,8 ; 5,7; 7,5 kW
- dimesnions: L3100 x W1800 x H3500
- weight: 10200 kg
 
  86
IDMA32071
MakeLorenz
ModelSN4
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel’s diameter - 180 mm
Gear width - 45 mm
Max module - 4
Min module - 0,5
Stroke length max - 0 - 52 mm
Table diameter - 160 mm
Table bore diameter - 75 mm
Dimensions of the machine - 2300 x 1500 x 2360 mm
Rack milling length max - 560 mm
Power capacity - 6 kW
Weight of the machine - 2.500 kg
 
  87
IDMA31953
MakeLorenz
ModelLS300
YOM1979
ConditionGood Condition
PhotoSee Photo
Maximum diameter: 300 mm
Module +: 6 mm
 
  88
IDMA31938
MakeMaag Switzerland
ModelSH180/300
YOM
Conditionexcellent working condition
PhotoSee Photo
Maximum tip circle diameter: 3000mm,
Minimum tip circle diameter: 60mm,
Maximum face width for spur gears: 430mm,
Maximum module with rack-type cutter: 20mm,
Maximum module with single-tooth cutter: 40mm,
Minimum module: 3,
Maximum number of teeth: 400,
Minimum number of teeth with rack-type cutter: 10,
Minimum number of teeth with single-tooth cutter: 2,
Maximum helix angle: 45 degree,
Maximum weight of gear and fixture: 8000 kg,
Machine is under power and is in very good condition.
Produces gears to an excellent surface finish and gear quality.
Excludes plunging head
 
  89
IDMA31876
MakeTos Czech
ModelOH6
YOM1958
ConditionGood Condition
PhotoSee Photo
Chuck diameter: 600 mm,
Module: 6
Diameter of front wheel: 500 mm,
Dimensions: 2100 x 1000 x 2100 mm,
Weight: 3500 kg
 
  90
IDMA31667
MakeTos Czech
ModelOHA50A
YOM1991/1984
ConditionGood Condition
PhotoSee Photo
Max Wheel Diameter :- 500 mm
Min Wheel Diameter:- 50 mm
Gear Width:- 125 mm
Min Module :- 1.5
Max Module :- 8
Max number of teeth :- 300 mm
Diameter Clambing table :- 500 mm
Table Bore Diameter :- 500 mm
Total Power requirement:- 15 kva
Machine weight :- 5200 kg
 
  91
IDMA30956
Make
Model
YOM
Condition
PhotoSee Photo
Cutter Inspection Machine GLEASON 528
 
  92
IDMA30955
Make
Model
YOM
Condition
PhotoSee Photo
Hypoid Cutter Sharpener GLEASON 13А
 
  93
IDMA30954
Make
Model
YOM
Condition
PhotoSee Photo
Gear Lapper GLEASON 516
 
  94
IDMA30953
Make
Model
YOM
Condition
PhotoSee Photo
Gear Generator GLEASON 116
 
  95
IDMA30952
Make
Model
YOM
ConditionGood Condition
PhotoSee Photo
Hypoid Tester GLEASON 512
 
  96
IDMA30380
MakeGleason USA
ModelG14W SL-S
YOM1978
ConditionGood Condition
PhotoSee Photo
Min Distance between front of the spindle and machine center: 64 mm,
Max distance between front of the spindle and machine center: 381 mm,
Module: 8,5,
Quantity: 2 nos
 
  97
IDMA30252
MakeMicromatic Shearspeed
Model3073
YOM1997
ConditionGood Condition
PhotoSee Photo
Capacity-External:
Maximum Part Diameter: 7"
Minimum Part Diameter: 5"
Mimimum Part Diameter w/Available Reduction Units: 3"
Diametral Pitch Range: 6 to 16
Maximum Stroke: 3"
Maximum Face Width: 2.75"
Main Drive Motor HP/RPM: 25/1800
Height: 134"
Width: 79"
Depth: 81"
Equipped with:
Allen Bradley Panelview Controls
Tool Feed Cam
Workholding Fixture
Ratchet Wheel
Cutter Body
Hydrualic Unit
Coolant Pump Motor
 
  98
IDMA30246
MakeFellows,USA
Model645A
YOM
ConditionGood Condition
PhotoSee Photo
Max pitch diameter (External) 18"
Max pitch diameter (Internal)
Max face width, external & internal 5"
Max diametrical pitch spur 4 DP
Max diametrical pitch helical 6 DP
Bore through work spindle 2.875"
Cutter spindle diameter
Max distance table surface to spindle 7.5"
Max helix angle with proper guide 30 deg
Stroking speeds 50-300 SPM
Dimensions (L x H x W) 63"x 77"x 48"
Machine net weight, approx. 6,800 lbs
Machine Equipped With:
5'' Stroke
0 Riser
 
  99
IDMA30241
MakeMaag Switzerland
ModelSH250
YOM1974
ConditionGood Condition
PhotoSee Photo
MAX. TIP CIRCLE DIA. (SPUR GEAR) 2499 MM
MIN. TIP CIRCLE DIA. (SPUR GEAR) 201 MM
MODULE MIN PITCH W/ RACK-TYPE CUTTER .0875 DP (30)
MODULE MAX PITCH W/ RACK-TYPE CUTTER 12.7 DP (2)
MODULE MAX W/ SINGLE-TOOTH CUTTER .5 DP (50)
MIN./ MAX. NUMBER OF TEETH 12/1000
HELIX ANGLE INFINITE
MAX. FACE WIDTH (SPUR GEAR) 660 MM
MAX. TABLE LOAD 33000 LBS.
MAX. RAM STROKE 686 MM
MIN. RAM STROKE 70 MM
DIAMETER OF WORK TABLE BORE 419 MM
WORK TABLE BORE LENGTH 1199 MM
MACHINE FOOTPRINT (L X W) 5969 MM X 4293 MM
MACHINE HEIGHT 3327 MM
MACHINE WEIGHT 84,000 LBS.
EQUIPPED WITH:
ALLEN BRADLEY PLC RETROFIT IN 1999
1118 MM DIA. BUILT IN ROTARY TABLE
2413 MM DIA. ADDITIONAL TABLE/ SUB PLATE
2845 MM DIA. ADDITIONAL TABLE / SUB PLATE
JVE INTERNAL ATTACHMENT
CUTTING COOLANT SYSTEM
CHIP CONVEYOR
SET OF CHANGE GEARS
 
  100
IDMA30238
MakeFellows,USA
Model4AGS
YOM
ConditionGood Condition
PhotoSee Photo
Maximum Pitch Diameter, External & Internal: 6"
Maximum Face Width, External & Internal: 2"
Maximum Diametral Pitch, Spur: 4
Maximum Diametral Pitch, Helical: 5
Hole in Work Spindle: 3"
Overall Dimensions: 56"L x 44"W X 82"H
Approximate Weight: 7,000 lbs
EQUIPPED WITH:
Spur Guide
Fixture Clamp/Unclamp
Standard & Gap Cutting
Push Button Controls
Coolant
Lube
Change Gears
Manuals
 
  101
IDMA30236
MakeFellows,USA
Model10-2
YOM
ConditionGood Condition
PhotoSee Photo
Strokes per Minute: 33 - 1300
Maximum Pitch Diameter (External): 10"
Maximum Pitch Diameter (Internal): 10"
Maximum Diametral Pitch (Spur): 4
Maximum Diametral Pitch (Helical): 5
Maximum Face Width 10-2: 2"
Maximum Helix Angle (Using 5" Cutter): 45 Deg.
Maximum Overall Length: 118-7/8"
Maximum Overall Height (Zero Raise): 96-1/2
Maximum Overall Depth: 53"
Net Weight With Motors: 11,000 lbs
EQUIPPED WITH:
Spur Guide
3-Cut Cycle
14" T-Slotted Table w/5-7/8" Bore
Hydraulic Work Clamping
Light Curtain
Automatic Lube
(1) Set-Up of Change Gears
Allen Bradley PLC-2
2 Speed Stroking Motor
460V-3 Phase-60 Cycle 7.5/5.0 Motor and Controls
 
  102
IDMA30233
MakeFellows,USA
Model645A
YOM
ConditionGood Condition
PhotoSee Photo
Pitch Diameter: 18"
Face Width: 5"
Hole in Work Spindle: 5-5/8"
Maximum External and Internal Pitch Diameter: 18"
Maximum Diametral Pitch, Spur: 3/4
Maximum Diametral Pitch, Helical: 5/7
Dimensions (L x W x H): 5'3" x 4' x 6'5"
Net Weight, Approximate: 7,200#
EQUIPPED WITH:
6" Riser
Spur Guide
Change Gears For (2) Of Your Jobs
Coolant System
220/440/3/60 Motor & Controls
Operators Manual
 
  103
IDMA30231
MakeFellows,USA
Model7125A
YOM
ConditionGood Condition
PhotoSee Photo
Max. Pitch Diameter, External: 7"
Max. Pitch Diameter, Internal: 6"
Max. Face Width, External: 2"
Max. Face Width, Internal: 1-1/2"
Max. Diametral Pitch, Spur: 5/7
Max. Diametral Pitch, Helical: 6
Floor Space: 3'11" x 3'5"
Net Weight, Approximate: 3,300 lbs
Equipped with:
3" Riser
Updated Motor and Push Buttons
Counter Weight
Spur Guide
Hollow Cutter Spindle
Coolant
Change Gears for Two Jobs
Operators and Parts Manual
 
  104
IDMA30164
MakeStanko-Russia
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of gears cut : 800 mm,
Max module : 12 mm,
Max cutter stroke : 300 mm,
Max cutter diameter : 200 mm,
Saddle indexing gear diameter : 360 mm,
Cutter arbor diameter : 44.443 mm,
Spindle bore taper : No. 5 Morse,
Axis-to-axis distance between cutter and table :-
-Min : 0 mm,
-Max : 700 mm,
Faceplate diameter : 800 mm,
Distance from floor to faceplate : 870 mm,
Indexing gear diameter : 762 mm,
Table hole diameter : 120 A mm,
Range of cutter double strokes per min : 33-188 mm,
Range of table feed rates per cutter double stroke :
-Circular : 0.2-1.5 mm,
-Radial : 1-5.4 mm,
Table rapid rotation speed : 1.7 rpm,
Table rapid travel speed : 137 mm/min,
Cutter rapid rotation speed : 3 rpm,
Main electric motor power : 4.8; 5.7; 7.5 kW,
Dimension : 3100 x 1800 x 3500 mm,
Weight : 10200 kg.
Qty : 2 nos.
 
  105
IDMA30136
MakeFellows,USA
Model10-2
YOM1981
ConditionGood Condition
PhotoSee Photo
Pitch Diameter, External (Maximum) : 10",
Pitch Diameter, Internal (Maximum) : 10",
Diameteral Pitch, Spur Gears : 4 DP,
Diameteral Pitch, Helical Gears : 5 DP,
Face Width, External, Maximum : 2",
Face Width, Internal, Maximum : 2",
Helix Angle Degree W/Standard Guides : 45-DEGREES,
Bore Through Work Spindle : 3.5",
Spindle Diameter : 3.543",
Work Spindle Surface To Underside of Spindle : 13-15/64",
Fixture O.D., Maximum : 19",
(6) Cutter Speeds, Range : 125 TO 600 SPM,
Overall Dimensions, L X W : 9'11" X 4'5",
Overall Height : 8'1",
Weight, Approximately : 11000 LBS.
Equipped With :-
Auto Cycle,
Pick & Place,
Cutter Positioning,
Straight Guides,
Work Rotation Counter,
Parts Counter,
Coolant Sump In Base.
 
  106
IDMA30135
MakeFellows,USA
Model36-6
YOM
ConditionGood Condition
PhotoSee Photo
Maximum Pitch Diameter (External) : 914.4 mm,
Maximum Pitch Diameter (Internal) : 914.4 mm,
Maximum Workpiece & Fixture Diameter : 1016 mm,
Maximum Face Width : 150 mm,
(Depending On Cutter Relief Required)
Maximum Helix Angle (W/Proper Guides) : 45 Degrees,
Maximum Distance, Centerline Of Cutter,
Spindle And Work Spindle For Externals (W/Saddle-Backed Off) : 546 mm,
Max Distance, Centerline Of Cutter Spindle,
And Work Spindle For Internals : 349.25 mm,
Maximum Work & Fixture Clearance Height W/Cutter Ram,
In Uppermost Position : 453 mm
Max Diametral Pitch Spur Gears : 8.5-Module,
Max Diam Pitch Helical Gears : 6.4/5module,
Work Spindle Bore Diameter : 149.23 mm,
Cutter Spindle Taper #18 Jarno,
12 Stroking Speeds, W/Ranges : 18 To 300 Spm,
Machine Overall Length : 2336.8 mm,
Machine Overall Width : 1524 mm,
Machine Overall Height : 2286 mm,
Machine Net Weight, Approx. : 7,045 Kgs.
EQUIPMENT / FEATURES:
7-1/2 Hp Main Motor, 1800 Rpm,
Standard Straight Spur Guide,
4" Diameter Hollow Cutter Spindle,
Depth Feed And Number Of Cuts Dial Controlled,
Via Adjustable Trip Dogs,
Riser Assembly Of 205.7mm Height,
Rapid Rotation Of Work Spindle,
Assorted Change Gears,
Work Sub-Table,
One (1) Cutter Adaptor,
Self Contained Coolant System, Pump & Piping,
Full Complement Of Electrics (Motors/Controls),
(Presently Arranged For 220/440/3/60),
Guards, Covers.
 
  107
IDMA30134
MakeFellows,USA
Model10-6HZ
YOM1967
Condition
PhotoSee Photo
Maximum Pitch Diameter (External Gears) : 254 mm,
Maximum Pitch Diameter, (Internal Gears) : 330 mm,
Maximum Diametrical Pitch (Spur Gears) : Module 8.5,
Maximum Diametrical Pitch (Helical Gears) : Module 6.4/5,
Maximum Helix Angle (W/Proper Guides) : +/- 45 Degrees,
Maximum Stroke Length (Push Stroke) : 215.9 mm,
Maximum Nominal Face-Width (Push-Stroke) : 190.5 mm,
Maximum Face-Width (Pull Stroke) : 101.6 mm,
Cutter Spindle Diameter : 127 mm,
Max. Workpiece Diameter,
(Swing Inside Work Spindle Sleeve) : 558.8 mm,
Maximum Distance, Work Spindle Face,
To Cutter Spindle Face : 990.6 mm,
Rotary Feed Per Stroke : 24.5 mm,
Of Cutter Diameter) : .0152-.1168 mm,
Infeed Of Cutter Per Stroke : 0127-051 mm,
Stroking Speed Range : 8 To 275 Spm,
4-Speed Main Drive Motor : 10/600,900,1200,1800 Hp/Rpm,
Machine Overall Length : 5100 mm,
Machine Overall Width : 2200 mm,
Machine Approximate Net Weight : 12,700 kg.

Features / Equipment:
Base Machine, W/Cutter Head & Relieving Cutter,
Spindle W/Adjustable Work Spindle Slide,
Four Speed 10 Hp Main Motor With Manual Drum Switch For Speed Change Control,
Rapid Rotation Of Work Spindle For Truing Work,
Rapid Work Slide Traverse For Positioning Work Slide Relative To Cutter,
Capability Of Cutting On "Push" Or "Pull" Stroke,
Automatic Depth Feed Mechanism For One To Four Cuts,
Manual Control For Disengaging Cutter And Work,
Rotation To Facilitate The Cutting Of Slots And/Or Keyways,
Cutter Positioning Using Stroke Jog-Button,
Selection Of Rotary Feeds Via Pick-Off Gears,
Excellent Assortment Of Change Gears For Stroking,
Speed, Depth Feed Cam Gears, Index/Work Gears,
And Rotary Feed,
Hollow Cutter Spindle W/Straight Spur Guide,
Three (3) Additional Extra Straight Spur Guides,
Three (3) Cutter Spindle Adaptors, With,
Cutter-Spindle Extensions, Along With Adaptor,
For Cutting On "Pull" Stroke,
Tailstock With Manual Hand-Wheel Control,
Machine Main Base Extension With Long Cradle Bed And Cradle,
Assortment Of Work-Steady Rests For Workpiece Support,
Large Assortment Of Work-Holding Fixtures,
Work Spindle Adaptors, Etc.
Power Forced Lubrication System To All Working Elements,
Self Contained Coolant System (Pump & Piping),
Full Complement Of Electrics (Motors/Controls),
(Arranged For 220/440 V, 3-Phase, 60 Hz),
Misc. Wrenches, Spanners, Operator's Tools,
Guards/Covers.
 
  108
IDMA30110
MakeSykes,England
ModelGenertron II
YOM
ConditionGood Condition
PhotoSee Photo
Table:250mm
Swing:
-400mm for external
-240mm + cutter diameter for internal
Max pitch: 6 mod
Cutter Stroke:70mm
Max. helix: 45 degree
CNC Alen Bradley
 
  109
IDMA29672
MakeKarats,Japan
ModelGS201
YOM1980/11
ConditionGood Condition
PhotoSee Photo
Max dia : 1000 mm,
Max Width : 270 mm,
max Length : 200 mm.
 
  110
IDMI6538
MakeFellows,USA
Model10-4
YOM
ConditionGood Condition
PhotoSee Photo
HIGH SPEED GEAR SHAPER :-
Table Dia : 370 mm,
Table Bore : 160 mm,
Max Gear Dia : 250 mm (Internet & External),
Spindle Stroke : 100 mm,
Strokes per min : 1300,
Equipped with Tailstock,
Being made CNC Retrofitting. Machine will be ready for inspection.
 
  111
IDMI6524
MakeTos Czech
ModelOH4
YOM
ConditionGood Condition
PhotoSee Photo
Max gear dia: 200 mm,
Module: 4,
Quantity: 4 Units
 
  112
IDMA29549
MakeLorenz
ModelSN4
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel’s diameter - 180 mm,
Gear width - 45 mm,
Max module - 4,
Min module - 0,5,
Stroke length max - 0 - 52 mm,
Table diameter - 160 mm,
Table bore diameter - 75 mm,
Dimensions of the machine - 2300 x 1500 x 2360 mm,
Rack milling length max - 560 mm,
Power capacity - 6 kW,
Weight of the machine - 2.500 kg.
 
  113
IDMA29533
MakeLorenz
ModelSN4
YOM1971-1973
ConditionGood Condition
PhotoSee Photo
Max wheel's diameter: 180 mm,
Gear width: 45 mm,
Max module: 4,
Min module: 0,5
Stroke length max: 0-52 mm,
Table diameter: 160 mm,
Table bore diameter: 75 mm,
Dimensions of the machine: 2300 x 1500 x 2360 mm,
Rack milling length max: 560 mm,
Power capacity: 6 kW,
Weight of the machine: 2500 kg,
Quantity: 3 nos.
 
  114
IDMA29356
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Max diameter of gears cut: 800 mm,
Max module: 12 mm,
Max cutter stroke: 200 mm,
Saddle indexing gear diameter: 360 mm,
Axes distance (tool and table): 0-700 mm,
Largest tool diameter: 200 mm,
Cutter arbor diameter: 44.443 mm,
Taper M5
Table diameter: 800 mm,
Distance from floor to table: 870 mm,
Indexing gear diameter: 762 mm,
Table hole diameter: 120 A mm,
Double s.p.m: 33-188 mm,
Range of table feed rates per cutter double stroke:
-Circular: 0.2-1.5 mm,
-Radial: 1-5.4 mm,
Table rapid rotation speed: 1.7 rpm,
Table rapid travel speed: 137 mm/min,
Cutter rapid rotation speed: 3 rpm,
Main electric motor power: 4.8; 5.7; 7.5 kW,
Dimension: 3100 x 1800 x 3500 mm,
Weight: 10200 kg.
 
  115
IDMA29342
MakeLorenz
ModelSN4
YOM1977
ConditionGood Condition
PhotoSee Photo
Max wheel’s diameter - 180 mm
Gear width - 45 mm
Max module - 4
Min module - 0,5
Stroke length max - 0 - 52 mm
Table diameter - 160 mm
Table bore diameter - 75 mm
Dimensions of the machine - 2300 x 1500 x 2360 mm
Rack milling length max - 560 mm
Power capacity - 6 kW
Weight of the machine - 2.500 kg
 
  116
IDMA29337
MakeLorenz
ModelSN4
YOM
ConditionGood Condition
PhotoSee Photo
Max wheel’s diameter - 180 mm
Gear width - 45 mm
Max module - 4
Min module - 0,5
Stroke length max - 0 - 52 mm
Table diameter - 160 mm
Table bore diameter - 75 mm
Dimensions of the machine - 2300 x 1500 x 2360 mm
Rack milling length max - 560 mm
Power capacity - 6 kW
Weight of the machine - 2.500 kg
 
  117
IDMA29294
MakeRussian
Model5A122
YOM
ConditionGood Condition
PhotoSee Photo
Max. dividing diameter of a processed gear at external and internal gearing : 250 mm,
Max. diameter of installed work-piece : 300 mm,
Max. module of cut gears : 5 mm,
Max. width of cut gear wreath : 50 mm,
Diameter of working table area : 320 mm,
Max. nominal dividing diameter of the ram according to GOST 9323-79 : 100 mm,
Distance between lower basis plane of the machine and working table area : 895 mm,
Max. stroke length of the ram : 90 mm,
Max. distance between the axis of the tool spindle and the table axis : 260 mm,
Max. movement of the table axis in relation to the axis of the tool spindle : 340 mm,
Rapid rotation and the table movement are available Rapid rotation and the tool spindle movement are available Machinery dimensions : 2035 x 2630 x 2230 mm,
Machinery weight : 5000 kg.
Qty : 2 nos.
 
  118
IDMA28665
MakeRussian
Model5B150
YOM
ConditionGood Condition
PhotoSee Photo
Largest gear diameter : 800 mm,
Largest modul : 12,
Table diameter : 800 mm,
Table bore : 120 A mm,
Axes distance (tool and table) : 0-700 mm,
Largest tool diameter : 200 mm,
Stroke : 200 mm,
Daylight : 355 mm,
Spindle taper : Morse Nr.5,
Arbor diameter : 44,443 mm,
Double-strokes per minute : 33.188,
Table-move per double-stroke : radial move 1.5,4 mm (Radialvorschub),
Table-move per double-stroke : rotationl move 0,2.1,5 mm (Kreisvorschub),
Main drives : 4,8 ; 5,7; 7,5 kW,
Dimensions : L 3100 x W 1800 x H 3500,
Weight : 10200 kg.
 
  119
IDMA28490
MakeStanko-Russia
ModelEZ15B
YOM
ConditionGood Condition
PhotoSee Photo
Max job dia : 2280 mm,
Modul : 12.
Qty : 2 nos.
 
  120
IDMA28443
MakeStanko-Russia
Model5M161
YOM1978
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 1250 mm,
Min. work piece diameter : 160 mm,
Module : 12,
Spindle stroke : 200 mm,
Spindle double strokes range : 10.212 spm,
Spindle taper : Morse 5,
Table diameter : 1000 mm,
Distance between table surface and spindle : 140.340 mm,
Distance between table axis and spindle axis : 50.700 mm,
Table turning speed : 1,7 rpm,
Main drive power : 10 kW,
Machine overall dimensions : 3150 x 1780 x 3300 mm,
Machine weight : 10650 kg.
 
  121
IDMA28397
MakeStanko-Russia
Model5M161
YOM1979
ConditionGood Condition
PhotoSee Photo
Max diameter of wheels : 1250 mm,
Max module : 12 mm,
Table dia : 1000 mm,
Distance from cutter axis to the table axis : 50-700 mm,
Max toothing width : 160 mm,
Number of teeth : 12-200,
Dimensions : 3260 x 1850 x 3255 mm,
Weight : 10650 kg.
 
  122
IDMA28352
MakeStanko-Russia
ModelEZ15B
YOM1990
ConditionGood working condition
PhotoSee Photo
Max. gear dia: 2240 mm.
 
  123
IDMA28313
MakeMagg Germany
ModelSH180/300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 3000 mm,
Modul: 20 mm,
Table: 1000 mm,
Gear width: 430 mm,
Max helical angle: 45 degrees,
Table load: 8000 KGS,
Ram stroke adjustable: 40 to 450 mm,
Main motor: 15 KW,
Machine weight: 23000 kgs,
Steady change gears maag cutters.
top