Menu
Home
Sell Machines
Hot Deals
Main Site
VKengg.co.in
Category : Gear Machines
Sub-Category : Gear Tooth Chamfering
Total Machines Found :
6
Select
| Machine Details
1
ID
MA35329
Make
Samputensili
Model
SCTS
YOM
1998
Condition
Good Condition
Photo
See Photo
Min diameter: mm. 20
Max diameter: mm. 110
Toothed band thickness min .: mm. 4
Max toothed band thickness: mm. 105
MACHINE DIMENSIONS
Machine length: mm. 2000
Machine width (with cabinet): mm
2500
Machine height: mm. 2200
Weight kg. 1300
2
ID
MI7778
Make
England
Model
Hey10
YOM
Condition
Good Condition
Photo
See Photo
400/450 Volts
3 phase
Largest motor AMP rating:1.9
Isolator max AMP rating: 30
Control circuit voltage:110
3
ID
MA34335
Make
Chamfer-Matic
Model
YOM
Condition
Good Condition
Photo
See Photo
EQUIPPED WITH:
(2) Deburring Heads
6" 3-Jaw Chuck
Worklight
110V Electrics
4
ID
MA34332
Make
Cross
Model
YOM
Condition
Good Condition
Photo
See Photo
EQUIPPED WITH:
Cross 85 is designed to; spur gears, helical gears, spline teeth
straight or involute), spiral bevel pinion and hypoid pinions.
Hydraulic Chucking
(2) Cutter Heads
Auto Cycle
Hydraulic System
Lube System
Change Gears
Palm Buttons
CATALOG SPECIFICATIONS:
Gear Diameter Capacity: 0 to 10 Inches
Gear Face Capacity: 0 to 6 Inches
Overall Length Capacity: 0 to 15 Inches
Standard Indexing Range: 8 to 80 Teeth
Bearings: Anti-Friction
Power Transmission: Vee Belt, Constant Mesh, Gearing and Spline Shafts
Indexing Drive: Precision, Roller Index Drive
Capacity Of Oil Tank: 12 Gallons
Floor Space Required: 55 x 47 Inches
Net Weight: 3,500 lbs
Model 85 Cross is designed with high speed steel formed cutters to allow
deburring and chamfering of both ends simultaneously on gears to 10" diameter
8 to 80 teeth. With a continuous oscillating action, two independently
adjustable cutter heads on the Model 85 deburr and chamfer the tight spots on
all kinds of external gears and splines.
5
ID
MA34331
Make
Cross
Model
YOM
Condition
Good Condition
Photo
See Photo
No.65
EQUIPPED WITH:
Complete with Cutter
Power Cylinder
Work Spindle
Change Gears
Coolant System
Guards
Set up for job with cutter
SPECIFICATIONS:
Capacity Of Coolant Tank: 15 gallons or 56 liters
Floor Space Required: 53 x 49 inches or 134.6 X 124.5 cm
Gear Diameter Capacity: 10 inches or 254 mm
Gear Face Capacity: 9 inches or 228.6 mm
Gear Pitch Capacity: 4 pitch or finer; 6 module or finer
Standard Indexing Range: 10 teeth or 80 teeth; other ranges available
Net Weight: 4800 lbs. or 2180 kg
6
ID
MA34330
Make
Cross
Model
YOM
1960
Condition
Good Condition
Photo
See Photo
No.55
EQUIPPED WITH:
Hydraulic Chucking Cylinder
Power Hydraulic Rapid Traverse
Stock Divider
Spindle Collet Adaptor For Pencil Tools
Lift Cam
Coolant Pump & Piping
One Set-Up Of Change Gears
Covers, Operator Manual, Parts List & Wiring Diagrams
SPECIFICATIONS:
Maximum Gear Diameter: 18"
Maximum Face Width: 14"
Maximum Pitch: 1.5 DP (16.9 Module)
Main Drive & Hydraulic Pump Motor: 1hp
Cutter Spindle Motor: 1hp
Coolant Tank Capacity: 15 gal.
Floor Space: 50 x 50"
Approximate Weight: 3,700 lbs