Category : Gear Machines

Sub-Category : Gear Tooth Chamfering & Deburring

Total Machines Found : 14

Select | Machine Details
 
  1
IDMA35351
MakePRAWEMA
ModelW2/1
YOM1991
ConditionGood Condition
PhotoSee Photo
Workpiece , min./max. 30 - 400 mm
Number of teeth 6 150
Module range, max. 5
Tool holder shaft SK 30 / 20
Tool speeds 4,000 rpm
Spindle drive max. infinitely variable 1.8 kW
Feeds, longitudinal and cross 0.001 12 m/min
Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm
Workspindle slide 400 mm
Tool speed, max. 3,000 rpm
Tool holder SK 30
Total electrical load, approx. 16 kW - 380 V - 50 Hz
Weight, approx. 10,000 kg
Accessories / Special Features
* BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process.
* 2 workspindle units, left and right, which can be set at any angle.
* CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide.
* L and O Axes for milling spindle. C Axis for workspindle rotation.
* Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control.
* Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air.
* Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication.
* Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc.
The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity.
 
  2
IDMA34334
MakeSamputensili
ModelSM2TA
YOM1997
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
Allen Bradley Panel View 900
Auto Load
Chip Conveyor
Coolant Tank & Pump
Stack Light
SPECIFICATIONS:
Max. Workpiece Diameter: 10", 250mm
Min. Workpiece Diameter: 3/4", 20mm
Max. Tooth Band Width: 4", 105mm
Min. Tooth Band Width: .157", 4mm
Floor to Floor Time: . 9"
Dimensions L x W x H: 85" x 122" x 98"
Approximate Weight: 5,500 lbs
 
  3
IDMA34333
MakeMitsubishi
ModelMA30
YOM1999
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
Fanuc Control
Magnetic Chip Conveyor
Coolant System with Pump & Piping
Transformer
Power Lube
Auto Feed
Full Enclosure
SPECIFICATIONS:
Max. Part Diameter: 11"
Diametral Pitch: 0.5-16.9
Max. Face Width: 2.36"
Max. Diameter Frasing Cutting: 9.84"
Travel Stroke: 7.87"
Center Distance Between Frasing Cutter & Part Arbor: 4.33"Min./12.2"Max.
Rotational Speed: 1-150 rpm
Max. Deburring Cutter Stroke Diameter: 6.3"
Max. Stroke: 5.1"
Center Distance Between Deburring Cutter and Part Arbor Axes: 5.1"
Upward/Downward Distance Between Deburring & Arbor Axes: Up 0mm, Dwn 40mm
Travel Distance Per Pitch: 0.4", Max. 4 Pitches
Travel Distance From Opening to Closing: Left 0.4", Right 2.36"
Base Stock: 3.9"
Follow Stock: 3.9"
Frasing Cutter Drive: 400W, w/ 1/15 Reduction Gear
Hydraulic Pump: 1.5kW, 4 Phases
Installation Area: 4'2" x 7'4"
Approx. Weight: 5,511 lbs
 
  4
IDMI7363
MakeSamputensili
ModelSGT3
YOM
ConditionGood Condition
PhotoSee Photo
Gear Deburring Machine, Samputensili SU SGT 3
 
  5
IDMA21513
MakeChinese
ModelYB9332G
YOMBrand New
ConditionBrand New
PhotoSee Photo
workpiece dia : external gear 320 mm, workpiece dia : internal gear 150 mm, max module 6 mm, distance from front end face of cutter spindle to axis of work spindle Manual operating 40-200 mm, power operating 40-220 mm, number of teeth of workpiece 10-120, distance from axis of cutter spindle to end face of work spindle 45-280 mm,range of workable axial plunge feeds 0,5-15 mm, range of cutter head swivel +_ 20, cutter dia 13-18 mm, work spindle adaptor plate bore dia 100 mm, cutter spindle speeds 1600,2000,2500 RPM, cutting time per tooth 0,8 , 1,43, 2,52 sec, tool spindle motor: power 1.1 kW, speed 2840 RPM, workpiece spindle motor : power 0.8 kW, speed 935 RPM, hydraulic motor :0.8 kW, speed 935 RPM, coolant pump motor : power 0.09 kW, flow rate 25/min, overall dimensions 161 x 115 x 131 mm, net weight approx 2.2 tons.
 
  6
IDMA20711
MakeRussian
ModelBCH550-2-20
YOMBrand New
ConditionBrand New
PhotoSee Photo
Max. Diameter of machined gears, mm: 500
Min. Outer diameter, mm 70
Module of machined gears, mm 1,510
Max.width of machined gears, mm 350
Max.diameter of grinding wheel, mm: 125
Distance from the machine base to upper face of template, mm 910
Distance from gear axis to front wall of the machine, mm 250
Max.vertical travel of grinding head, mm 300
Wheel rotation speed, rpm 7700
Table rotation speed (stepless), rpm 0,36
Main drive power, kW 0,12
Overall dimensions, mm:
-length 1050
-width 870
-height 1400
Weight, kg 350
Total drive power, kW 0,74
Cycle time:2 mins(approx 30 pcs/hr). Delivery time: 1 month
 
  7
IDMA20066
MakeHurth,Germany
ModelZK7
YOM
ConditionGood Condition
PhotoSee Photo
a
 
  8
IDMA20065
MakeHurth,Germany
ModelZK7
YOM1975
ConditionGood Condition
PhotoSee Photo
 
  9
IDMA20038
MakeHurth,Germany
ModelZK10
YOM
ConditionGood Condition
PhotoSee Photo
 
  10
IDMA20036
Make
ModelZK10
YOM1973
ConditionGood Condition
PhotoSee Photo
Maximum Gear Capacity - 400 mm (15-3/4"), Number Of Teeth (Range) - 6 - 200, Cutting Area Travels: (Maximum)
Spindle Quill Axial Adjustment (Course) - 80mm
Spindle Quill Axial Adjustment (Fine) - 7mm
Spindle Slide Return Stroke Adjustment - 100mm
Knee Assembly Horizontal Adjustment - 650mm
Indexing Head Horizontal Adjustment - 540mm
Cutter Spindle Head Vertical Adjustment - 200mm
Cutter Spindle Head Swivel Range - 90 Degrees
Cutter Speeds (8) - 300 - 3400 RPM
Stroke Rate - 30 - 170 SPM
Net Weight, Approximate - 4,800
 
  11
IDMA20016
MakeHurth,Germany
ModelZK10
YOM1964
ConditionGood Condition
PhotoSee Photo
Chamfering and Deburring Machine, Conventional.
 
  12
IDMA20009
Make
ModelSM2TA
YOM1989
ConditionGood Condition
PhotoSee Photo
Max. Workpiece Diameter 250mm,
Min. Workpiece Diameter 20mm,
Max. Toothed Band Width 105mm,
Min. Tooted Band Width 4mm,
Floor-to-Floor Time 225mm
Dimensions (L x W x H) 2125 x 3050 x 2450 mm
Approximate Weight 5,500 lbs
MACHINE IS EQUIPPED WITH THE FOLLOWING:
Gravity Feed - 3 Phase 460, PLC mini 2
 
  13
IDMA20008
Make
Model
YOM1986
ConditionGood Condition
PhotoSee Photo
Max. Workpiece Diameter 250mm, Min. Workpiece Diameter 20mm, Max. Toothed Band Width 105mm, Min. Tooted Band Width 4mm,
Floor-to-Floor Time 225mm
Dimensions (L x W x H) 2125 x 3050 x 2450 mm
Approximate Weight 5,500 lbs
MACHINE IS EQUIPPED WITH THE FOLLOWING:
Gravity Feed,
3 Phase 460, with PLC mini 2
 
  14
IDMA20007
MakeUhlich Prawema
ModelATM55
YOM1978
ConditionGood Condition
PhotoSee Photo
max. wheel diameter 550 mm,
max. number of teeth 180 min,
max. module 12,
min. module 0,75,
total power requirement 6,5 kW,
weight of the machine ca. 2.2 t,
dimensions of the machine ca. 1,96 x 1,26 x 1,40 m.
top