V. K. Engineering - Buying & Selling of Machines made easy

Category : Grinding Machines

Sub-Category : Grinder Centerless

Total Machines Found : 95

Select

| Machine Details

1

ID	MI8114
Make	SOLAR
Model
YOM
Condition	Good Condition
Photo	See Photo
wheel size 4x14 inch.

2

ID	MI8113
Make	Lidkoping
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
wheel 350x125

3

ID	MI8112
Make	Ghiringhelli
Model	GP-100
YOM
Condition	Good Condition
Photo	See Photo \| See Video
wheel 350x100

4

ID	MI8111
Make	Hartex
Model
YOM
Condition	Good Condition
Photo	See Photo
wheel. 350x125 mm

5

ID	MI7964
Make	Cincinnati Milacron,Austria
Model	340-20
YOM
Condition	Good Condition
Photo	See Photo
twin grip - PLC based machine Diameter Capacity, Optimal :- 0.5 to 3" Diameter Capacity, Maximum :- Up to 6" Grinding Wheel Diameter, Minimum :- 17.5" Grinding Wheel Diameter, Maximum :- 24" Grinding Wheel Width, Maximum :- 20" Grinding Wheel Hole Diameter :- 12" Grinding Wheel Motor :- 40hp standard, up to 100hp Grinding Wheel Speed, Maximum :- 10,500 SFPM Regulating Wheel Diameter, Minimum. :- 9.5" Regulating Wheel Diameter, :- 14" Regulating Wheel Maximum :- 8" Regulating Wheel Hole Diameter :- 5 " Regulating Wheel Speeds, Range :- 0 to 300 rpm Regulating Wheel Motor :- 2 hp Static Stiffness :- 1,000,000 LBS Machine Footprint, Approximately :- 11'x 8' x 8' weight , approximately :- 22,000 LBS

6

ID	MA35267
Make	Cincinnati,USA
Model
YOM
Condition	Good Condition
Photo	See Photo
CINCINNATI NO. 2 OM CENTRELESS GRINDER

7

ID	MA34844
Make	Hartex
Model	BED4/II
YOM	1981
Condition	Good Condition
Photo	See Photo
Grinding range -  1 - 50 mm Maximum workpiece length for plunge-cut grinding:160 mm Maximum workpiece length for throughfeed grinding:300 mm Grinding wheel dimensions:  x wide  400 x 160 x 203 mm Regulating wheel dimensions:  x wide  225 x 160 x 127 mm Grinding wheel speeds 1,530 / 2,148 rpm. Grinding wheel delivery 1 - 20 my Regulating wheel speeds stfl. adjustable 5 - 230 rpm. Inclination of the regulating wheel -2 - + 5 degrees Angle of the regulating wheel for cone grinding -3 - + 3 degrees Feed / rapid traverse of the grinding slide 0-1 / 0-25 mm Wide lifting of the regulating wheel slide 0 - 50 mm Grinding wheel drive 11 kW / total drive approx. 15 kW - 380 V - 50 Hz Weight 4,000 kg

8

ID	MA34833
Make	Koenig & Bauer
Model	Multimat 150-5
YOM	1978
Condition	Good Condition
Photo	See Photo
Grinding � regular/maxima:2 � 50/100 mm Max. length of workpiece for Thru-Feed-grinding:250 mm Max. length of workpiece for plunge-cut grinding:200 mm Grinding wheel size, � x width:600 x 200 mm Regulating wheel size, � x width: 300 x 200 mm Grinding wheel speed, max. :1.450 rpm/35 m/sec. Regulating wheel speeds (steeples): 10 � 140/230 rpm Regulating wheel tilt plus/minus:+3 / �5 � Stroke of Dressing Device : 200 mm Grinding wheel drive, approx.: 18,5 kW Total electrical load approx.. :25 kW - 380 V - 50 Hz Weight approx.. : 4.500 kg Accessories/Special Features: * Machine is suitable for a Plunge-In Grinding Process with a manual workpiece Injection device and a pneumatic driven workpiece lift-off device after grinding Process. The final removal of the finished parts is by hand. * Actually mounted a workpiece rest for medium sized workpieces, (maybe 50 mm) * The Regulating wheel slide/workpiece rest carriage can be inclinate by 3 to 5 degrees to compensate cylindrical errors. * The infeed adjustment of workpiece saddle is controlled by a hydraulic plunge-in device with a cam device for quick-feed forward and backwards, also there is a fine infeed actuated by a step motor controlled by MARPOSS � Unit. * The grinding spindle unit is fixed and accommodates a complex hydraulic dressing device with template and the slide can be swivelled for profiling plane shoulders, stepmotor for the infeed of diamond tool compensation, also there is mounted a hi pressure coolant nozzle to cool down the diamond tool and to rinse the grinding wheel. * Hydraulic driven Copy Dressing device mounted above the regulating wheel. * The regulating wheel speed is steplessly adjustable, higher speed during dressing poc. * The control panel contains all machine functions like Numbers of dressing cycles, number of workpieces, adjustable spark-out time, speed range, manual or automatic process, etc. * some sep. Flanges and grinding and regulating wheels, tool for changing the flanges, separate Hydraulic and sep. Switch cabinet, central lubrication, MARPOSS Unit, * ! Actually there is no Coolant device available !

9

ID	MA34797
Make	WMW Mikrosa
Model	SASL125/1E
YOM
Condition	Good Condition
Photo	See Photo \| See Video
The main drive (motor) is missed. Grinding diameter � 125mm Grinding wheel�s width � 250mm Grinding wheel�s diameter � 630mm Grinding length � 245mm

10

ID	MA34682
Make	Giustina
Model	R100SC
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter - 2..100mm Grinding wheel width - 254mm Wheel diameter - 610mm Weight - 6500kg

11

ID	MA34573
Make	WMW
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter � 125mm Grinding wheel�s width � 250mm Grinding wheel�s diameter � 630mm Grinding length � 245mm

12

ID	MA34224
Make	WMW,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
SwaAGL 315 - 3 items Model: SwaAGL 125 - Quantity:1 item Specification: WORKING RANGE Height of centers: 160 mm Height above supports: 1080 mm Width of the work-piece: 12-63 mm Max diameter of the work-piece: �-Automatic grinding: 160 mm �-Manual grinding: 180 mm Grinding diameter: 28-160 mm Max movement of the spindle: 180 mm Number of step-by-step rev: 90-125-180-250-355-500-700-1000 TRAVELING OF GRINDING MANDREL Fast traveling: 10 mm Max feeding by flywheel: 125 mm Max automatic feeding: 1,8 +/- 3% mm Feeding by one turn of flywheel: 2mm Feeding by one graduation of flywheel scale: 0,01 mm Automatic feeding speed: 0,02 - 10 mm/min Hydr. compensation size: 0,01-0,06 mm GRINDING MANDREL Max diameter of grinding wheel: 630 mm Min diameter of grinding wheel: 440 mm Max width of grinding wheel: 50 mm Hole circle: 305 mm Circular speed: 35/50/60 m/sec Max turning range: 20 degrees Speed of working spindle: 1050-1500-1800 rpm Total power requirement: 15 kW Machine dimensions: �-Length: 3340 mm �-Width: 2730 mm �-Height: 2350 mm Machine weight: 5000 kg

13

ID	MA33928
Make	WMW Mikrosa
Model	SASL400/1
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter - 50..400 mm Grinding wheel's diameter - 800 mm Grinding wheel's width - 500 mm Dimensions - 4970x3400x2140 mm Weight - 13000 kg

14

ID	MA33790
Make	WMW Mikrosa
Model	SASL125/1E
YOM
Condition	Good Condition
Photo	See Photo
There are 5 such machines available. 3 of them are fully complete. 2 others are complete, but chucks are taken from the machines, but they are available. Grinding diameter � 125mm Grinding wheel�s width � 250mm Grinding wheel�s diameter � 630mm Grinding length � 245mm

15

ID	MA33771
Make	WMW Mikrosa
Model	SASL1/D
YOM
Condition	Good Condition
Photo	See Photo
There are 2 such machines available. Grinding diameter � 32mm Grinding wheel�s width � 100mm Grinding wheel�s diameter � 315mm

16

ID	MA33770
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
There are 5 such machines available. Grinding diameter � 125mm Grinding wheel�s width � 250mm Grinding wheel�s diameter � 630mm Grinding length � 245mm

17

ID	MA33501
Make	Mikrosa
Model	SASL200 x 500
YOM
Condition	Good Condition
Photo	See Photo
Max. height from spindle to table : 240 mm Height of the grinding spindle over the ground : 1100 mm Diameter of the details : -Max.: 200 mm -Min.: 10 mm Dimensions of the grinding wheel : -Max. diameter: 500 mm -Min. diameter: 370 mm -Max. width: 500 mm -Hole: 305 mm Max. circle speed of the grinding wheel: 45 m/sec Work rev number, stepless: 8-125 rev/min Rev number of repair: 740 rev/min Possibilities of the main wheel regulation: -Axial regulation: +/-10 mm -Vertical regulation: 200 mm Min. size of feeding: 0,01 mm Power: 54 kW Dimensions: 3850x2300x2200 mm Weight: 11500 kg

18

ID	MA33351
Make	WMW Mikrosa
Model	SASL5/1AD
YOM	1988
Condition	Good Condition
Photo	See Photo
Spindle isn�t available. Grinding wheel diameter - 630 mm Grinding wheel width - 500 mm Grinding wheel bore - 305 mm Weight - 12000 kg

19

ID	MA33264
Make	Mikrosa
Model	SASL5/1AD
YOM
Condition	Good Condition
Photo	See Photo
Grinding wheel diameter : 630mm Grinding wheel width : 500mm Grinding wheel bore : 305mm Weight : 12000kg

20

ID	MA32953
Make	Rossi Monza
Model
YOM
Condition	Good Condition
Photo	See Photo
500, diameter main grinding wheel 508 mm, operating grinder band 250 mm, diameter conducting grinding wheel 305 mm, conductor grinder band 250 mm, grinding diameter short pieces 1 - 150 mm, grinding diameter bars 75 mm, engine grinder 25-30 Hp.

21

ID	MA32931
Make	ROSSO-MONZESE
Model
YOM
Condition	Good Condition
Photo	See Photo
1)8487 Centerless Grinder Make : Rosso-Monzese Max. diameter to grinder : 90mm Min. diameter to grinder : 10mm Dimensions of wheel to grinder : 300x50mm Dimensions of wheel : 150x50mm Length : 1250mm Width : 1000mm Height : 1500mm 2) 8488 Centerless Grinder Make : Rosso-Monzese Max. diameter to grinder : 90 mm Min. diameter to grinder : 10 mm Dimensions of wheel to grinder : 300x50mm Dimensions of wheel : 150x50mm Length : 1250mm Width : 1000mm Height : 1500mm 3) 8489 Centerless Grinder Make : Rosso-Monzese Max. diameter to grinder : 90mm Min. diameter to grinder : 10mm Dimensions of wheel to grinder : 300x50mm Dimensions of wheel : 150x50mm Length : 1250mm Width : 1000mm Height : 1500mm 4) 8490 Centerless Grinder Make : Rosso-Monzese Max. diameter to grinder : 90mm Min. diameter to grinder : 10mm Dimensions of wheel to grinder : 300x50mm Dimensions of wheel : 150x50mm Length : 1250mm Width : 1000mm Height : 1500mm

22

ID	MA32316
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: Max: 125 mm, Min: 1.5 mm, Disk type grinding wheel width: 250 mm, Disk type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk type grinding wheel diameter: 315 mm, Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight: 8 ton Quantity: 6 nos

23

ID	MA32314
Make	Ghirindelli
Model	M100
YOM
Condition	Good Condition
Photo	See Photo
Grinding wheels width: 100 mm

24

ID	MA32313
Make	Ghiringhelli
Model	M100
YOM
Condition	Good Condition
Photo	See Photo
Grinding wheels width: 100 mm

25

ID	MA32021
Make	WMW Mikrosa
Model	SASL3/1AD
YOM
Condition	Good Condition
Photo	See Photo
Workpiece's diameter (grinding wheel - 500 mm) - 140 mm Workpiece's diameter (grinding wheel - 630 mm) - 80 mm MIN workpiece's diameter - 1 mm Workpiece's length - 200 mm Grinding wheel's diameter - 380/630 mm Grinding wheel's width - 250 mm Inner diameter - 305 mm Weight - 4800 kg

26

ID	MA31859
Make	WMW Mikrosa
Model	SASL1/D
YOM	1991
Condition	Good Condition
Photo	See Photo
Workpiece's diameter - 32 mm Grinding wheel's diameter - 315 mm Grinding wheel's hole - 127 mm Grinding wheel's width - 100 mm Control wheel's diameter - 200 mm Control wheel's hole - 76 mm Control wheel's width - 100 mm Machine's weight - 2000 kg Quantity: 4 nos

27

ID	MA31745
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: Max: 125 mm, Min: 1.5 mm, Disk type grinding wheel width: 250 mm, Disk type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk type grinding wheel diameter: 315 mm, Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight: 8 ton Quantity: 10 no

28

ID	MA31596
Make	Jotes
Model	MC40
YOM	1986
Condition	Good Condition
Photo	See Photo
aaa

29

ID	MA31461
Make	WMW
Model	SASL 400/1
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter - 400mm Grinding disc diameter - 480..800mm Grinding disc length - 500mm Dimensions - 6200x4000x2100mm Weight - 13000kg

30

ID	MA31263
Make
Model	SASL125x250
YOM
Condition	Good Condition
Photo	See Photo
Working diameter - 125mm Grinding circle - 630x250mm Dimensions - 2300x1620x3180mm Weight - 5000kg There are 2 such machines available.

31

ID	MA31116
Make	SASL
Model	125/1E
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: -Max.: 125 mm -Min.: 1,5 mm Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm Grinding length: 245 mm Dimensions: 3180x1620x2300 mm Machine weight: 5 tons

32

ID	MA31095
Make
Model	SASL 200x500A
YOM	1970
Condition	Good Condition
Photo	See Photo
Max Diameter of Work : 200mm Min Diameter of Work : 10mm Wheel Dimension: Width : 500mm Diameter : 500mm Weight : 11 Tons

33

ID	MA31051
Make	Giustina
Model	R114
YOM	1988
Condition	Good Condition
Photo	See Photo
Year of manufacturing - 1988 Grinding diameter - 2..300mm Belt wheel - 508mm Wheel diameter - 610mm Weight - 12000kg

34

ID	MA31041
Make
Model	SASL 200x500A
YOM	1970
Condition	Good Condition
Photo	See Photo
Max Diameter of Work : 200mm Min Diameter of Work : 10mm Wheel Dimension: Width : 500mm Diameter : 500mm Weight : 11 Tons

35

ID	MA30742
Make	Rossi Monza
Model	500
YOM	1990
Condition	Good Condition
Photo	See Photo
Working grinding wheel's dimensions - 508x254x250mm Driving grinding wheel's dimensions - 305x127x250mm Dimensions - 2050x1100x1700mm Weight - 3450kg QTY- 5 per Each Machine

36

ID	MA30283
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: Max: 125 mm, Min: 1.5 mm, Disk type grinding wheel width: 250 mm, Disk type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk type grinding wheel diameter: 315 mm, Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight: 8 ton Quantity: 3 nos

37

ID	MA30095
Make	Cincinnati,USA
Model
YOM
Condition	Good Condition
Photo	See Photo
The bar diameter capacity ranges from 1.2mm to 75 mm

38

ID	MA30003
Make	Cincinnati Milacron,Austria
Model	Cinco15
YOM	1972
Condition	Good Condition
Photo	See Photo
Diameter capacity nominal : 0" to 3", Diameter capacity maximum : 4", Grinding wheel diameter minimum : 17", Grinding wheel diameter maximum : 24", Grinding wheel width maximum : 8", Grinding wheel hole diameter : 12", Regulating wheel diameter minimum : 9.5", Regulating wheel diameter maximum : 12", Regulating wheel width maximum : 8", Regulating wheel hole diameter : 5", Regulating wheel speeds, number : Infinite, Regulating wheel speeds, range (rpm) : 15 to 300, Grinding wheel motor, horsepower : 15 hp, Regulating wheel motor, horsepower : 1.5 hp, Floor space required, w x d : 7' x 3'10", Weight, approximately : 8250 lbs, Equipped with :- Infeed work rest. Electro-hydraulic automatic infeed attachment. Hydraulic grinding wheel profile diamond turning. Manual regulating wheel profile diamond turning, One shot lubrication system, Coolant system w/magnetic drum filter.

39

ID	MA30000
Make	Rossi Monza
Model
YOM
Condition	Good Condition
Photo	See Photo
Max. diameter to grinder : 90 mm, Min. diameter to grinder : 10 mm, Dimensions of wheel to grinder : 300 x 50 mm, Dimensions of wheel : 150 x 50, Length : 1250 mm, Width : 1000 mm, Height : 1500 mm, Total 4 identical machines but with different colors.

40

ID	MA29998
Make	Royal Master
Model	TG-12x3
YOM	1977
Condition	Good Condition
Photo	See Photo
Capacity: Thrufeed: 0.004"- 1 1/2" Length: 12' On 1/2" Diameter Wheels: Max. Grinding Wheel Size: 12" x 3" Wide Min. Grinding Wheel Size: 10" x 1/4" Wide Max. Regulating Wheel Size: 6" x 3" Wide Min. Regulating Wheel Size: 1/4" Wide With Spool Grinding Wheel Speed: 2,040 RPM Regulating Wheel Speed (Variable): 25- 480 RPM Regulating Wheelhead: Max. Angle Of Tilt For Thrufeed: 6 Degrees Max. Swivel For Taper Grinding: 5 Degrees Dimensions )L x W x H): 48" x 24" x 52" Weight: 2,800 Lbs. Equipped with - Automatic Thrufeed Attachment - Automatic Sizing - Hydraulic Dressers - One Shot Lube System - Coolant System - Horsepower: 7 1/2

41

ID	MA29948
Make	Cincinnati,USA
Model	107-4
YOM	1959
Condition	Good Condition
Photo	See Photo
Grinding capacity with infeed and thrufeed work rests:0 to 1-1/2" diameter Max./Min. grinding wheel Diameter x width x hole:16"/12" x 4" x 10" Max./Min. regulating wheel diameter x width x hole: 9"/7" x 4" x 4" Diameter recessed both sides 5-1/2" diameter Regulating wheel speed, infinitely Variable:22 to 300 RPM Approx. Weight:4,560 lbs Approx. Floor Space Required:63" x 61" Equipped with: Hydraulically actuated diamond truing for grinding wheel Straight screw-type diamond truing for regulating wheel work rest holder 7-1/2 HP grinding wheel drive motor 3/60/22-440 volt spindle motor

42

ID	MA29947
Make	Van Norman
Model
YOM	1962
Condition	Good Condition
Photo	See Photo
Hyd. Tank + Pump Coolant Hard Chrome Ways Auto-Infeed

43

ID	MA29946
Make	Van Norman
Model
YOM	1966
Condition	Good Condition
Photo	See Photo
Auto-Infeed Coolant Tank+Pump Hyd. Tank + Pump 3 Extra Wheel Mounts Hyd. Profile Dressers

44

ID	MA29945
Make	Dedtru
Model	4235-0000
YOM	1996
Condition	Excellent
Photo	See Photo
Regulating Roll : 10", Cross feed travel : 6-3/4", Longitudinal Travel : 18", Table size : 6" X 18", Workpiece Size :- O.D. Work with basic equipment : 1/4" TO 1-1/4", O.D. Work w/std. optional accessories : 0.031" TO 4", I.D. Work maximum O.D. : 5", Maximum wheel diameter : 8", Maximum wheel length : 3", Approximate machine weight : 1,500 LBS, EQUIPPED WITH :- Unison Model "C6" Ded-Tru centerless grinding unit, Designed to do through feed O.D., I.D. and second operations. Regulating roll with its own self-contained DC, Drive controller. regulating roll size 6" X 6", HARIG #618W SURFACE GRINDER BASE 3 H.P. "Pope" super-precision direct drive spindle. Supplied with hole through column for longer parts. External coolant tank & pump. Machine is wired for 3 / 60/ 440 volts.

45

ID	MA29944
Make	Cincinnati,USA
Model	2-LO
YOM	1950
Condition	Good Condition
Photo	See Photo
CAPACITY: 3.5" GRINDING WHEEL SIZE (MAX): 20" SPEED: 1200 RPM REGULATING WHEEL (MAX): 12" SPEED (12): 300 RPM CIP LYONS RETOROFITTED SIEMENS COROS OP3 CNC CONTROLS MACHINE DIMENTIONS: 115"L, X 72"W, X 95"H MACHINE APPOX WEIGHT: 9000 LBS

46

ID	MA29943
Make	Cincinnati,USA
Model	220-8
YOM	1957
Condition	Good Condition
Photo	See Photo
CAPACITY: 0-3" MAX GRINDING WHEEL SIZE: 4"DIA X 8"W X 12" HOLE MAX REGULATING WHEEL SIZE: 12"DIA X 8"W X 5" HOLE REGULATING WHEEL SPEEDS:11-300 INFINITE RANGE LOW:11-55 RPM HIGH:59-300 RPM GRINDING WHEEL DRIVE MOTOR:20 H.P. POWER TRANSMISSION :6 V-BELTS REGULATING WHEEL DRIVE MOTOR:1-1/2 H.P. EQUIPPED WITH: AUTO INFEED HYDRAULIC TRACING DRESSERS AUTOMATIC VIBRATORY PARTS FEEDER DIMS: 8'L, X 6'W, X 6'H APPROX WEIGHT: 12,400 LBS.

47

ID	MA29942
Make	Paragon
Model	RC12
YOM	New 1991
Condition	Good Condition
Photo	See Photo
GRINDING RANGE ( CATALOG ): 00394 TO 3.1" SET UP FOR GRINDING RANGE:0394 TO 1.5" GRINDING WHEEL SIZE:12" X 6" X 4.7" REGULATING WHEEL SIZE: 8" X 6" X 3.5" GRINDING WHEEL SPEED:1745 RPM REGULATING WHEEL SPEED --- ( 7 ): 21 TO 333 RPM REGULATING WHEEL SWIVEL ANGLE:+/- 5 DEG. GRINDING WHEEL MOTOR:7.5 HP 220/440/3/60 REGULATING WHEEL MOTOR:1 HP APPROXIMATE MACHINE WEIGHT:3,000 LBS APPROXIMATE MACHINE DIMENSIONS: 72"(LR) X 48"(FB) X 60"(H) EQUIPPED WITH --- THRU-FEED FIXTURE HYDRAULIC WHEEL DRESSERS MANUAL INFEED OF HEAD HYDRAULIC UNIT COOLANT SYSTEM

48

ID	MA29941
Make	Dedtru
Model	288-0000
YOM	1985
Condition	Excellent
Photo	See Photo
Regulating Roll : 10", Cross feed travel : 6-3/4", Longitudinal Travel : 18", Table size : 6" X 18", Workpiece Size :- O.D. Work with basic equipment : 1/4" TO 1-1/4", O.D. Work w/std. optional accessories : 0.031" TO 4", I.D. Work maximum O.D. : 5", Maximum wheel diameter : 8", Maximum wheel length : 3", Approximate machine weight : 1,500 LBS, EQUIPPED WITH :- Unison Model "C4" Ded-Tru centerless grinding unit, Designed to do through feed O.D., I.D. and Second operations. Regulating roll with its own self-contained DC, Drive controller. regulating roll size 4" X 4", HARIG #618W SURFACE GRINDER BASE 3 H.P. "Pope" 3/60/230-460 Volt super-precision direct drive spindle. Unison designed / supplied with hole through column for longer parts. Graymills external coolant tank & pump. Machine is wired for 3 / 60/ 230 volts.

49

ID	MA29939
Make	Cincinnati,USA
Model	220-8
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity :- Nominal Diameter : 0 - 3", Maximum Diameter : 4-3/4", Grinding Wheel :- Hole Diameter : 12", Maximum Diameter : 20", Minimum Diameter : 15", Widths : 1" - 8", Motor : 20 HP, 3,500 RPM, Regulating Wheel :- Hole Diameter : 5", Maximum Diameter : 13", Minimum Diameter : 9-3/4", Widths : 1" - 8", No. of Speeds : Infinite, Low Range : 11 - 56 RPM, High Range : 56 - 300 RPM, Regulating Wheel Motor : 1-1/2 HP, Required Floor Space : 142" x 95" x 78", 13,000 lbs, Equipped With :- Manual Regulating Wheel Infeed, Hydraulic Grinding Wheel Profile Diamond Truing, Hydraulic Regulating Wheel Profile Diamond Truing, 8" Wide Grinding Wheel Mounted Coolant Nozzle, Coolant Tank & Pump, Hydraulic System.

50

ID	MA29925
Make	WMW Mikrosa
Model	SASL125/1A
YOM	1978
Condition	Good Condition
Photo	See Photo
Grinding diameter: Max: 125 mm, Min: 1.5 mm, Disk type grinding wheel width: 250 mm, Disk type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk type grinding wheel diameter: 315 mm, Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight: 8 ton, Quantity: 2 nos

51

ID	MA29899
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: -Max: 125 mm -Min: 1.5 mm Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm Grinding length: 245 mm Speed: 45 m/sec Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min Voltage: 380 V Spindle power: 22/30 kW Total power: 34 kW Dimensions: 3180x1620x2300 mm Machine weight: 8 ton, Quantity: 3 nos In 2015, repairs and inspection of all equipment was conducted. The following works were carried out: -full audit hydraulic station -Replace all bearings. - Revision of the electrical machine - Replaced all hoses -reviziya correct device for controlling the grinding stone wear

52

ID	MA29868
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition
Photo	See Photo
Grinding diameter: -Max: 125 mm -Min: 1.5 mm Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm Grinding length: 245 mm Speed: 45 m/sec Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min Voltage: 380 V Spindle power: 22/30 kW Total power: 34 kW Dimensions: 3180x1620x2300 mm Machine weight: 8 ton

53

ID	MA29522
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: -Max: 125 mm -Min: 1.5 mm Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm Grinding length: 245 mm Speed: 45 m/sec Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min Voltage: 380 V Spindle power: 22/30 kW Total power: 34 kW Dimensions: 3180x1620x2300 mm Machine weight: 8 ton Qty : 2 nos.

54

ID	MA29458
Make	Studer
Model	S30-12
YOM	1976
Condition	Good Condition
Photo	See Photo
Centers height: 125 mm, Distance between centers: 600 mm, Grinding wheel diameter: 400 mm, Grinding wheel dimensions: 400 x 50 mm, Machine's weight: 3200 kg.

55

ID	MA29457
Make	Studer
Model	RHU400
YOM	1976
Condition	Good Condition
Photo	See Photo
Working height: 240 mm, Centers height: 125 mm, Working length: 400 mm,

56

ID	MA29325
Make	WMW Mikrosa
Model	SASL125/1A
YOM	1978
Condition	Good Condition
Photo	See Photo
Max grinding diameter: 125 mm, Min grinding diameter: 1,5 mm, Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight : 8 ton, Quantity: 3 nos

57

ID	MA29261
Make	WMW Mikrosa
Model	SASL125x500
YOM	1987
Condition	Good Condition
Photo	See Photo
Working diameter: 125 mm, Grinding sheet: 630 x 250 mm, Power: 15 kW, Weight: 5000 kg.

58

ID	MA29080
Make	WMW Mikrosa
Model	SASL125x250
YOM	1977
Condition	Good Condition
Photo	See Photo
Max working diameter : 125 mm, Grinding sheet : 630 x 250 mm, Power : 15 kW, Dimensions : 2300 x 1620 x 3180 mm, Weight : 5000 kg.

59

ID	MA28962
Make	WMW Mikrosa
Model	SASL125
YOM	1977
Condition	Good Condition
Photo	See Photo
Max grinding diameter: 125 mm, Min grinding diameter: 1,5 mm, Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight : 8 ton, Quantity:2 nos

60

ID	MA28839
Make	WMW Mikrosa
Model	SASL400x500
YOM	1980
Condition	Good Condition
Photo	See Photo
Diameter of detail: -Max: 400 mm -Min: 50 mm Max length of detail (without special device): 400 mm. By grinding of gash method: Diameter of detail: -Max: 400 mm -Min: 50 mm Max length of detail (without special device): 490 mm. Max depth of detail: 25 mm Max corner of copying by correction of wheel: -rising: 45 degree -descending: 60 degree Dimension of the grinding wheel: -Max diameter: 800 mm -Min diameter: 480 mm -Max width: 500 mm -Hole: 400 mm Max circle speed of the grinding wheel: 35 m/sec Number of rev of grinding wheel dependent on wearing: 835, 955, 1120 rev/min Dimensions of driving wheel: -Min diameter: 400 mm -Max diameter: 250 mm -Max width: 630 mm -Hole: 203 mm Work rev number, step less: 6,4�93 rev/min Number of rev by correction: 750 rev/min Feedings: For usual grinding: 0...8,5 m/mim For gash method grinding: 0,1...8 mm/min For wheel correction: 25...1000 mm/min Fast run way by gash: 0...7 mm Fine feeding by gash: 0...1,2 mm. Fast traveling of grinding wheel slides: 2 mm/sec Max height of centers over the lower bracket: 285 mm Main drive power: 55 kW Required power: 67 kW Dimension: 4970 x 3400 x 2140 mm Weight: 13 000 kg

61

ID	MI6320
Make	WMW Mikrosa
Model	SASL200 x 500
YOM
Condition	Excellent
Photo	See Photo
Grinding diameter max. : 200 mm, Regulating wheel width : 500 mm, Max. width of grinding wheel : 500 mm,

62

ID	MA28439
Make	WMW Mikrosa
Model	SASL125/1E
YOM	1989
Condition	Good Condition
Photo	See Photo
Grinding diameter Max: 125 mm, Min: 1.5 mm, Disk type grinding wheel width: 250 mm, Disk type grinding diameter: 630 mm, Grinding length: 245 mm, Speed:45 m/sec, Disk type grinding wheel diameter: 315 mm, Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight: 8 ton.

63

ID	MA28427
Make	WMW Mikrosa
Model	SASL200 x 500
YOM	1978
Condition	working condition ,under power
Photo	See Photo
Max Diameter of Work : 200 mm, Min Diameter of Work : 10 mm, Wheel Dimension : Width : 500 mm Diameter : 500 mm, Weight : 14 Tons.

64

ID	MA28401
Make	WMW Mikrosa
Model	SASL5/AD
YOM
Condition	Good Condition
Photo	See Photo
Max height from spindle to table : 1100 mm, Height of the grinding spindle over the ground : 1100 mm, Diameter of the details :- -Max : 200 mm, -Min : 5 mm, Dimension of the grinding wheel :- -Max diameter : 630 mm, -Max width : 500 mm, Hole : 305 mm, Max circle speed of the grinding wheel : 45 m/sec, Min size of feeding : 0,001 mm,

65

ID	MA28394
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Complete,very good condition
Photo	See Photo
Max grinding diameter: 125 mm, Min grinding diameter: 1,5 mm, Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180x1620x2300 mm, Machine weight : 8 ton. Qty : 2 nos.

66

ID	MA28312
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Max grinding diameter: 125 mm, Min grinding diameter: 1,5 mm, Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight : 8 ton.

67

ID	MA28129
Make	WMW Mikrosa
Model	SASL125/1E
YOM	1989
Condition	Good Condition
Photo	See Photo
Grinding diameter Max: 125 mm, Min: 1.5 mm, Disk type grinding wheel width: 250 mm, Disk type grinding diameter: 630 mm, grinding length: 245 mm, Speed:45 m/sec, Disk type grinding wheel diameter: 315 mm, Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, Machine weight: 8 ton.

68

ID	MA28087
Make	WMW Mikrosa
Model	SASL125/1E
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: max: 125 mm, Min: 1.5 mm, Disk type grinding wheel width: 250 mm, Disk type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk type grinding wheel diameter: 315 mm, Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180 x 1620 x 2300 mm, machine weight: 6 ton, Standard set of accessories, Documentation, the machines had been used for production of drills, Missing: Silver contactors box and transformers inside the electrical cabinets, Quantity: 7 nos

69

ID	MA28052
Make	WMW Mikrosa
Model	SASL200 x 500
YOM
Condition	Good Condition
Photo	See Photo
Max Diameter of Work : 200 mm, Min Diameter of Work : 10 mm, Wheel Dimension : Width : 500 mm Diameter : 500 mm, Weight : 14 Tons. Qty : 4 nos.

70

ID	MA27998
Make	WMW Mikrosa
Model	SASL200 x 500
YOM	New 1978
Condition	Good Condition
Photo	See Photo
Grinding diameter : 200 mm, Regulating wheel width : 500 mm, Max. width of grinding wheel : 500 mm, quantity : 1 nos.

71

ID	MI6222
Make	Tos Czech
Model	BUA63 x 3000
YOM
Condition	Good Condition
Photo	See Photo
Swing dia: 630 mm, Distance between centres: 2000,3000,4000 (50008) mm, Grinding wheel (dia x width x bore ): 750 x 100 x 305 mm, Max. width of solid grinding wheel: 125 mm, Max. width of bulit up grinding wheel: 175 mm, Hole in internal grinding spindle quil: 100 mm, Taper in work spindle: Morse no.6, Taper in tailstock barrel: Morse no. 6, Rapid traverse of wheel head: 90 mm, Minimum infeed of wheel head (per diameter): 0.001 mm, Max. admissible weight of workpiece held in centres: 3000 kg, Output of wheel head motor: 19 kW, Total input required: 31kVA, Weight of machine: 12000,13700,15400 (16600)* kg, Floor space required: length 8000,10000,12000 (14200)* mm, width: 3495 mm,

72

ID	MI6209
Make	Tos Czech
Model	BBJ6
YOM
Condition	Good Condition
Photo	See Photo
Grinding Range:3-63 mm, Max. Workpiece Length:220 mm, Main Motor Output:7.5 KW, Dimensions (LxWxH) : 1940 x 1710 mm, Quantity:2 nos.

73

ID	MI6208
Make	Tos Czech
Model	BB10
YOM
Condition	Good Condition
Photo	See Photo
Max. grinding diameter: 100 mm dia, Min. Grinding dia.: 3 mm, Max. stone diameter main spindle: 500 mm, Max. stone width: 200 mm Quantity: 2 nos

74

ID	MI6207
Make	WMW Mikrosa
Model	SASL125/1E
YOM
Condition	Good Condition
Photo	See Photo
Max Grinding Diameter: 125 mm, Min Grinding Diameter: 1.5 mm, Disk-Type Grinding Wheel Width: 250 mm, Disk-Type Grinding Diameter: 630 mm, Grinding Length: 245 mm, Speed: 45 m/sec, Disk-Type Grinding Wheel Diameter: 315 mm, Quantity: 6 nos.

75

ID	MA27870
Make	WMW Mikrosa
Model	SASL 5AD
YOM
Condition	Good Condition
Photo	See Photo
Max height from spindle to table : 1100 mm, Height of the grinding spindle over the ground : 1100 mm, Diameter of the details :- -Max : 200 mm, -Min : 5 mm, Dimension of the grinding wheel :- -Max diameter : 630 mm, -Max width : 500 mm, Hole : 305 mm, Max circle speed of the grinding wheel : 45 m/sec, Min size of feeding : 0,001 mm, Quantity 2 pcs

76

ID	MA27745
Make	WMW Mikrosa
Model	SASL5/AD
YOM
Condition	Good working condition
Photo	See Photo
Max height from spindle to table - 1100 mm, Height of the grinding spindle over the ground - 1100 mm, Diameter of the details: Max - 200 mm, Min - 5 mm, Dimension of the grinding wheel - Max diameter - 630 mm, Max width - 500 mm, Hole - 305 mm, Max circle speed of the grinding wheel - 45 m/sec, Min size of feeding - 0,001 mm, Dimension � 3850 x 2300 x 2200 mm, Weight - 11500 kg.

77

ID	MA27729
Make	WMW Mikrosa
Model	SASL5AE
YOM
Condition	Good Condition
Photo	See Photo
Max height from spindle to table: 1100 mm Height of the grinding spindle over the ground: 1100 mm Diameter of the details: -Max.: 200 mm -Min.: 5 mm Dimensions of the grinding wheel: -Max diameter: 630 mm -Max width: 500 mm Hole: 305 mm Max circle speed of the grinding wheel: 45 m/sec Min size of feeding: 0,001 mm

78

ID	MA27728
Make	WMW Mikrosa
Model	SASL5/AD
YOM
Condition	Good Condition
Photo	See Photo
Max height from spindle to table - 1100 mm, Height of the grinding spindle over the ground - 1100 mm, Diameter of the details: Max - 200 mm, Min - 5 mm, Dimension of the grinding wheel - Max diameter - 630 mm, Max width - 500 mm, Hole - 305 mm, Max circle speed of the grinding wheel - 45 m/sec, Min size of feeding - 0,001 mm, Dimension � 3850 x 2300 x 2200 mm, Weight - 11500 kg.

79

ID	MA27727
Make	WMW Mikrosa
Model	SASL5/AD
YOM
Condition	Good Condition
Photo	See Photo
Max height from spindle to table - 1100 mm, Height of the grinding spindle over the ground - 1100 mm, Diameter of the details: Max - 200 mm, Min - 5 mm, Dimension of the grinding wheel - Max diameter - 630 mm, Max width - 500 mm, Hole - 305 mm, Max circle speed of the grinding wheel - 45 m/sec, Min size of feeding - 0,001 mm, Dimension � 3850 x 2300 x 2200 mm, Weight - 11500 kg.

80

ID	MA27639
Make	WMW Mikrosa
Model	SASL125/1E
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: -Max: 125 mm -Min: 1.5 mm Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm Grinding length: 245 mm Speed: 45 m/sec Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min Voltage: 380 V Spindle power: 22/30 kW Total power: 34 kW Dimensions: 3180x1620x2300 mm Machine weight: 8 ton.

81

ID	MA27157
Make	WMW Mikrosa
Model	SASL 5AD
YOM
Condition	Good Condition
Photo	See Photo
Max height from spindle to table : 1100 mm, Height of the grinding spindle over the ground : 1100 mm, Diameter of the details :- -Max : 200 mm, -Min : 5 mm, Dimension of the grinding wheel :- -Max diameter : 630 mm, -Max width : 500 mm, Hole : 305 mm, Max circle speed of the grinding wheel : 45 m/sec, Min size of feeding : 0,001 mm,

82

ID	MA26965
Make	WMW Mikrosa
Model	SASL125x250
YOM	1975
Condition	Good Condition
Photo	See Photo
Grinding diameter max : 125 mm, Sanding sheet : 630 x 250 mm, Abmessugen approximately : 2300 x 1620 x 3180, Strip set 4,8,16, Connecting power : 15 kW, Weight about 5 tons.

83

ID	MA26964
Make	WMW Mikrosa
Model	SASL125/1E
YOM	1977
Condition	Good working condition
Photo	See Photo
Grinding diameter: -Max: 125 mm -Min: 1.5 mm Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm Grinding length: 245 mm Speed: 45 m/sec Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min Voltage: 380 V Spindle power: 22/30 kW Total power: 34 kW Dimensions: 3180x1620x2300 mm Machine weight: 8 ton.

84

ID	MA26640
Make	WMW Mikrosa
Model	SASL5
YOM
Condition	working condition ,under power
Photo	See Photo
Max. grinding dia : 200 mm, Min grinding dia : 5 mm, Circle speed of the grinding wheel : 45 m/sec, Min size of feeding : 0.001 mm.

85

ID	MA26464
Make	WMW Mikrosa
Model	SASL125x250
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter max : 125 mm, Sanding sheet : 630 x 250 mm, Abmessugen approximately : 2300 x 1620 x 3180, Strip set 4,8,16, Connecting power : 15 kW, Weight about 5 tons.

86

ID	MA26059
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Max grinding diameter: 125 mm, Min grinding diameter: 1,5 mm, Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180x1620x2300 mm, Machine weight : 8 ton. Qty : 2 nos.

87

ID	MA25990
Make	WMW Mikrosa
Model	SASL125/1A
YOM
Condition	Good Condition
Photo	See Photo
Max grinding diameter: 125 mm, Min grinding diameter: 1,5 mm, Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180x1620x2300 mm, Machine weight: 5,2 tons.Quantity : 7 nos

88

ID	MA25631
Make	WMW Mikrosa
Model	SASL200 x 500
YOM	1977
Condition	Good Condition
Photo	See Photo
Grinding diameter : 200 mm, Regulating wheel width : 500 mm, Max. width of grinding wheel : 500 mm.

89

ID	MA25484
Make	WMW Mikrosa
Model	SASL125x250
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter max : 125 mm, Sanding sheet : 630 x 250 mm, Abmessugen approximately : 2300 x 1620 x 3180, Strip set 4,8,16, Connecting power : 15 kW, Weight about 5 tons.

90

ID	MA21871
Make	WMW Mikrosa
Model	SASL125/1A
YOM	1988
Condition	Good Condition
Photo	See Photo
Max grinding diameter: 125 mm, Min grinding diameter: 1,5 mm, Disk-type grinding wheel width: 250 mm Disk-type grinding diameter: 630 mm, Grinding length: 245 mm, Speed: 45 m/sec, Disk-type grinding wheel diameter: 315 mm Number of grinding wheel turns: 11-140 U/min, Voltage: 380 V, Spindle power: 22/30 kW, Total power: 34 kW, Dimensions: 3180x1620x2300 mm, Machine weight: 5,2 tons - 2 machines

91

ID	MA17935
Make	Paragon
Model	RC16
YOM	2000,2006
Condition	Very good condition
Photo	See Photo
FULLY AUTOMATIC MAGNETIC AND FILTRATION SYSTEM - 2 machine

92

ID	MA17614
Make	Mikrosa Naumburg
Model
YOM
Condition	Good Condition
Photo	See Photo
Wheel : 250 x 600 mm, Motor : 32 kW, With plunge grinding.

93

ID	MA17277
Make	Cincinnati,USA
Model
YOM	1973
Condition	Very good condition
Photo	See Photo
Capacity : 50.8 mm to 114 mm diameter, Maximum rapid advance stroke : 38 mm, Maximum two rate infeed stroke : 1.52 mm, Infeed rate : 0.002 to 1.0 IPM Maximum swivel plate swivel 30 degrees, Headstock movement parallel to swivel plate : 121 mm, Vertical movement on eccentric roller under cross slide : 13 mm, Longitudinal cross slide movement : 191 mm, Grinding wheel size, maximum : 508 x 41 x 305 mm, Main motor : 10 HP Headstock motor : 2 HP Floor space : 2438 x 1905 x 2134 mm, Weight : 12,000 lbs. Equipment with machine: 12,000 SFPM grinding wheel speed, Complete 460/3/60 electrics, Isolated hydraulic pump and tank unit, Standard headstock with magnetic driver and shoe set up for one size part Automatic and controlled rotary diamond behind-the-wheel truing att. Automatic double arm loader with ingoing and outgoing track, Automatic slide compensation, Splash guards and coolant at the machine but no coolant pump and tank. Qty: 5 Nos.

94

ID	MA17187
Make	Estarta
Model	EE312
YOM	1990
Condition	Good Condition
Photo	See Photo
Max. Grinding Diameter 1/406-76 mm, Max. Grinding Wheel Size 508 x 152 x 305 mm, Max. Spindle Speed 1200 RPM, Spindle Motor 15 HP. Equipped with: Infeed & Thru-Feed, 460/3/60.

95

ID	MA13157
Make	Koyo
Model	3S
YOM	1976
Condition	Good working condition
Photo	See Photo

top