Menu
Home
Sell Machines
Hot Deals
Main Site
VKengg.co.in
Category : Grinding Machines
Sub-Category : Grinder Cylindrical Universal CNC
Total Machines Found :
40
Select
| Machine Details
1
ID
MA35701
Make
Studer
Model
S35
YOM
1990
Condition
Good working condition
Photo
See Photo
Main dimensions:
Center height: 175 mm,
Center distance: 1000 mm,
Grinding length max: 540 mm,
Grinding diameter: 300 mm,
Cross slide:
Longitudinal axis Z Max. travel: 650 mm,
Min autom travel: 0.0005 mm,
Speed V: 0.015-10000 mm/min
Resolution: 0.0005 mm,
Cross axis X max. travel; 267 mm,
Min autom travel (programmable) : 0.00025 mm,
3 infeed speeds(Programmable) : 0.00025 mm
Resolution: 0.00025 mm
Wheel head right:
Grinding wheels width'
Bore: 500 x 80 x 203 mm,
Power requirement: 7,5 kW,
Peripheral speed 50 Hz: 44 m/s
60 HZ: 41 m/s
Speeds 50 Hz: 1670 min- 1
60 Hz: 1530 min-1
Swivel range: +/-8,5 degree
Work head
With hydrodynamic bearing speed range nw: 30-750 min-1
Fitting taper: W-20/W25
Power requirement0.785 kW
Max. workpiece weight between centres: 130 kg
Live grinding load: 100 Nm
Tailstock
Fitting taper; Morse 3
Travel of barrel: 30 mm,
Guaranteed accuracy
Surface straightness: 0,0025/500 mm,
Roundness on live spindle: 0.00025 mm
Connection loads
Total power requirement: max.20 kw
Max. permissible voltage fluctuations: +15%-10%
Max. permissible frequency fluctuations: +- 3%
Required pressure: 5 bar
2
ID
MA35595
Make
Okamoto
Model
OGM820U
YOM
1998
Condition
Good Condition
Photo
See Photo
|
See Video
SWING OVER TABLE: 8.6"
DISTANCE BETWEEN CENTERS: 19.68"
MAXIMUM TABLE TRAVEL: 30"
TRANSVERSE SPEEDS: 0 TO 160” IPM
SWIVEL ANGLE (TABLE): 0 TO 9 DEGREES
GRINDING WHEEL SIZE: 12” X 1” X 5”
GRINDING WHEEL SPEED: 2,000 / 2,240 RPM
WHEELHEAD TOTAL STROKE: 8”
SWIVEL ANGLE (WHEELHEAD): +/- 30 DEGREES
AUTOMATIC FEED (19 SETTINGS): 0.00001” TO .002”
CONTINUOUS FEEDRATE (PLUNGE): 0 TO 157” IPM
MANUAL PULSE FEED (3): 0.00001”, 0.0001”, 0.001”
WHEELHEAD RAPID RETRACT: 1.5”
RAPID FEEDRATE: 157” IPM
SPARKOUT: 0 TO 10 PASSES
WORKHEAD SPINDLE TAPER: #3 MT
SWIVEL ANGLE (WORKHEAD): +30/ - 90 DEGREES
WORKHEAD SPEEDLE SPEED: 15 TO 650 RPM
TAILSTOCK SPINDLE CENTER: 3MT
TAILSTOCK SPINDLE STROKE: 0.8”
APPROX. MACHINE WEIGHT: 6,700 LBS.
APPROX. DIMENSIONS: 110” X 69” 66’ H
EQUIPPED WITH: OKAMOTO / FANUC POWER MATE CONTROLS WITH FULL CRT, KEYBOARD.
REMOTE PENDENT.
PROGRAMMABLE TABLE TRAVERSE.
AUTO INFEED PLUNGE.
RAPID SPARKOUT TIMER.
DRESSING CYCLE.
BALL SCREWS FOR TABLE TRANSVERSE AND WHEELHEAD MOVEMENTS.
SWING DOWN INTERNAL GRINDING ATTACHMENT WITH SPARE MANDRELS.
VARIABLE SPEED WORKHEAD WITH JOG CONTROL.
COMBO LIVE/ DEAD CENTER.
6” 4-JAW CHUCK.
FRONT OPERATED COLLET CHUCK.
LEVER OPERATED TAILSTOCK.
UNIVERSAL WHEEL HEAD WITH (2) SPARE WHEEL MOUNTS.
BALANCING ARBOR.
SWIVEL TABLE WITH MICROMETER GAUGE.
TABLE MOUNTED DRESSER.
COOLANT WITH PAPER FILTRATION.
MISC. TOOLING INCLUDING,
DRIVE DOGS AND CENTERS.
TRANSFORMER.
REPAIR PARTS.
3
ID
MA35390
Make
Kellenberger
Model
KEL-VISTA UR175/1000
YOM
2007
Condition
Good Condition
Photo
See Photo
|
See Video
Number of axes: 3
Control CNC GE Fanuc 21i-T
Grinding diameter 350 mm
Grinding length 1000 mm
Center height 175 mm
Linear Axes
travel X/Z : 350/ 1150 mm
resolution X/ Z : 0.0001 mm
Automatic B-axis swivel of the wheelhead every 1°
Grinding Wheel holder Headstock
automatic indexing through Hirth teeth every 1°
motor power 5 kW
automatic swivelling of the grinding wheel holder headstock
orientation: -210 / +10°
max. part weight between centers 100 kg
Left External grinding:
grinding wheel dimensions (Ø x width x boring) 400 x 63 x 127 mm
Internal grinding:
rotation speeds: 25000, 28000 Rpm
Workpiece Holder Headstock
spindle speed: 0 - 800 Rpm
cone type MK5
headstock swiveling : -10/+100°
Counter Headstock
cone type MK4
quill travel 48 mm
Floor dimensions 3000 x 1700 mm
Machine height 1800 mm
Machine weight 3800 kg
Equipment
Tailstock with fine adjustment and air cushion
Internal grinding spindle FSAA 60x160-25.220-1132A: 25.000 Rpm
Internal grinding spindle RENAUD: 28.000 Rpm
Part length probe arm: MOVOMATIC C25
KEL-TOUCH automatic contact detection: MOVOMATIC EG102
Wheel-dresser upon table
Coolant tank with paper filtration: STREULI SPB4
Dust aspiration: IFS IFMO 1800
2 left grinding-wheels holder flanges
1 left external grinding-wheel
2 right grinding-wheels holder flanges
1 used right external grinding-wheel
Hub puller
internal grinding-wheel holders- different lengths and diameters
1x magnetic chuck CM5
1x 3-jaws chuck with manual clamping
4
ID
MA35389
Make
Junker
Model
BUAJ30
YOM
1995
Condition
Good Condition
Photo
See Photo
Technical details:
Table size: 1380x160 mm
Centre height: 150 mm
Distance between centre: 630 mm
Grinding head swivable: +45°/-15°
Grinding head motor power: 5,5 kW
Grinding wheel dimensions: 400x63x127 mm
Operation: hydraulic/electrical
Accessories:
1 Electronical balancing unit SCHMITT INDUSTRIES, type: SB-2500
1 Hydraulic tailstock quill
2 Three jaw chuck RÖHM, Ø 125 mm
5 Grinding wheel flanges with grinding wheels
7 Fixed centres in different sizes
2 Prism supports
1 Diamond dresser
1 Balancing arbor with balancer
1 Set drive carrier
1 Machine light
4 Machine feet
1 Coolant system with paper band filter
Operator key, Instruction manuals
5
ID
MA35310
Make
Studer
Model
S40
YOM
1994
Condition
Good Condition
Photo
See Photo
|
See Video
Max. Swing: 13.8 inches
Center Distance: 39.4 inches
Max. Weight between Centers: 290 pounds
Max. Longitudinal Travel (Z-Axis): 41.4 inches
Longitudinal Feed Rate: 0.000004 – 394 IPM
Longitudinal Resolution: 0.000004”
Max. Table Swivel: 8.5°
Max. wheel head Slide Travel: 10.8 inches
wheel head Slide Feed Rate: 0.000004 – 394 IPM
Wheel head Resolution: 0.000004”
Right Spindle Wheel Size (Dia x W x Bore): 20" x 3.15" x 5"
Wheel head Drive: 10 HP
Peripheral Speed: 6890 SFPM
Swivel Range of Wheel head: -15° to 225°
work head Speed Range: 30 - 750 RPM
wheel head Taper: No.3 MT
Tailstock Quill Travel: 1.37 inches
Main Spindle Motor: 10 HP
Approximate Dimensions (LR x FB x H): 160" x 86" x 84"
Approximate Weight: 11500 pounds
Fanuc 16-GC CNC Control. Programmable Positioning of Wheelhead at every 5 degrees. Dittel HBA4000 Wheel Balancer. Manual Pulse Generator. Pneumatic Cylinder on Headstock. Combination Lever/Pneumatic Tailstock. Foot Switch
6
ID
MA35308
Make
Studer
Model
S35
YOM
1989
Condition
Good Condition
Photo
See Photo
Center Height : 6-7/8"
Center Distance : 40"
Grinding Lenght Max : 21-1/4"
Grinding Diameter Max : 11-12/16"
Z Axis Travel : 25-19/32"
X Travel : 10"
Infeed Speeds : 0.0003 to 197 IPM
Grinding Wheel : 20" D X 3-1/4" Wide x 8" Bore
Grinding Wheel Speed : 1670RPM
Swivel Range : (+/-)8.5 Degrees
Workhead Speed Range : 15 to 750 RPM
Taper Morse : 5
Max. Workpiece Between Centers : 287LBS
Live Grinding Load : 74ft-LBS
Tailstock Barrel Travel : 1-13/16"
Weight : 7,716 LBS
7
ID
MA34743
Make
Kellenberger
Model
UR-M175-1000
YOM
1993
Condition
Good Condition
Photo
See Photo
|
See Video
SWING OVER TABLE, MAXIMUM 14"
DISTANCE BETWEEN CENTERS, MAXIMUM 40"
WEIGHT CAPACITY BETWEEN CENTERS 330 LBS
GRINDING WHEEL DIAMETER, STANDARD 16"
GRINDING WHEEL WIDTH, STANDARD 2.5"
GRINDING WHEEL HOLE DIAMETER 5"
GRINDING WHEELHEAD SWIVEL RANGE 270-DEGREES
WORKHEAD ANGULAR ADJUSTMENT 360-DEGREES
PERIPHERAL GRINDING WHEEL SPEED 6500 SFPM
WORKHEAD SPINDLE SPEEDS, RANGE 5 TO 500 RPM
GRINDING WHEELHEAD SPINDLE MOTOR 6 HP
WORKHEAD SPINDLE MOTOR 3 HP DC
EQUIPPED WITH:
KELLENBERGER "KELCO 70" CNC CONTROL
INTERNAL GRINDING SPINDLE ATTACHMENT
LIVE AND DEAD CENTER SPINDLE WORKHEAD
AUTOMATIC INFEED ACCELERATION GAP CONTROL
HYDRAULIC RETRACTION OF TAILSTOCK SLEEVE
MICRO-CORRECTOR ON TAILSTOCK
SEMI-ENCLOSED SOUND ENCLOSURE W/2 SLIDING DOORS
6" MAGNETIC CHUCK - COOLANT SYSTEM
(4) EXTRA INTERNAL SPINDLES
8
ID
MI7474
Make
Johnshipmen
Model
Ultramat1000
YOM
Condition
Very good condition
Photo
See Photo
Dia - 300 mm
Length - 1000 mm
9
ID
MA33990
Make
TSCHUDIN
Model
CNC PL 31
YOM
1991
Condition
Good Condition
Photo
See Photo
Grinding area:200 x 300 mm
Grinding length:340 mm
Centre height: 100 mm
Max. stone diameter:250 mm
Max. stone width:50 mm
Tool spindle carrier speeds:20-800 rpm
Total motor power:20,5 kW
Main Spindel Powe:3 Kw
Control system: Fanuc - 310 manuf.
Accessories:
Coolant.
Length: 2800 mm, Height: 1800 mm, Width: 2020 mm, Weight: 2200 k
10
ID
MA33968
Make
GER
Model
CU1000CNC
YOM
2002
Condition
Good Condition
Photo
See Photo
distance between centers : 1000 [mm]
- centers height : 180 [mm]
- max. grinding diameter : 350 [mm]
- max. part weight between centers : 150 [kg]
- stroke X x Z : 350 x 1180 [mm]
- universal grinding head
- left wheel dimensions : 500 x 80 x 203 [mm]
- right wheel dimensions : 300 x 25 x 76,2 [mm]
- peripheral speed : 45 [m/s]
- motor power : 7,5 [kW]
- internal grinding device
- part holder headstock type : CM5
- rotation speed : 10-800 [rpm]
- part holder headstock orientation : +/- 45°
- tail stock type : CM4
- quill diameter : 50 [mm]
- quill stroke : 40 [mm]
- dimensions : 3900 x 2450 x 1800 [mm]
- weight : 6150 [kg]
EQUIPMENT
- CN FAGOR 8040 TCO
- exter wheel trueing device
- internal wheel trueing device
- rest 2 points, 3 points
- wheel holder headstock manual indexing
- various flanges for left and right wheel holder
- grinding spindle 18 000 [rpm]
- measuring rule on axis X
11
ID
MA33967
Make
Studer
Model
S40CNC
YOM
1997
Condition
Good Condition
Photo
See Photo
- distance between centers : 1000 [mm]
- centers height : 175 [mm]
- strokes (Z/X) : 1050 x 275 [mm]
- max. feeds (Z/X) : 10 x 5 [m/min]
- grinding wheelhead type : 1 OD left + 1 ID
- grinding wheel dimensions : 400 x 63 x 80 [mm]
- grinding wheel motor power : 7,5 [kW]
- rotation speed : 1670 x 2200 [Rpm]
- grinding wheelhead orientation : -15 to +225 [°]
- workhead tapper : ISO 50 -CM3
- workhead rotation speed : 30-750 [Rpm]
- workhead power : 1.2 [kW]
- tail stock : type Morse 3
- quill stroke : 35 [mm]
- weight : 7000 [kg]
- Number of hours under power : 24587 [h]
- Number of working hours : 6410 [h]
EQUIPMENT
- control CNC FANUC 16 T
- programming through Pictogramming
- deported electronic handwheel
- grinding head 1 external grinding left
- B axis for indexing of the grinding wheelhead every 5°
manual
- tail stock with fine concentricity adjustment
- sensitron
- false table swiveling fine adjustment
- diamond grinding device retractable
- 5 grinding wheel holder flanges
- 4 grinding wheels
- 1 internal spindle : 20.000 [rpm]
- cooling tank
- Oil mist extractor
12
ID
MA33966
Make
Studer
Model
S40CNC
YOM
2002
Condition
Good Condition
Photo
See Photo
- Number of axes : 4
- Distance between centers : 1600 [mm]
- Centers height : 225 [mm]
LINEAR AXES
- Stroke X x Z : 275 x 1650 [mm]
- Resolution X x Z : 0,0001 [mm]
WHEELHEAD
- Orientation angle : -15 / +225 [°]
- Indexing precision B-axis : 1 [°]
- External grinding on the left
* Wheel dimensions (Ø x width x boring) : 500 x 80 x
203,5 [mm]
* Peripheral speed : 50 [m/s]
* Power : 7,5 [kW]
WORKHEAD
- Rotation speed : 0 - 1000 [Rpm]
- Taper type : ISO 50
- Power : 4 [kW]
- Indexing precision C-axis : 0,001 [°]
TAILSTOCK
- Internal taper : MT3
- Quill stroke : 35 [mm]
ELECTRIC SUPPLY
- Supply voltage : 400 [V]
FLOOR SPACE
- Floor dimensions : 5.200 x 2.300 [mm]
- Machine height : 2.084 [mm]
- Machine weight : 7.000 [kg]
MACHINES HOURS
- Working hours : 20.380 [h]
EQUIPMENT
- CN FANUC 16-TB
- Interface : RS232
- Electronic deported crank handle
- Direct measuring scales on axes X and Z
- Electronic touch detection : Sensitron
- Auto-calibrating device with length probe
MARPOSS T25
- Fixed wheel dresser upon workhead
- Tailstock
* with fine concentricity adjustment
* with hydraulic retractation through pedal
* with pneumatic lifting
- Coolant tank : 375 [l]
* With paper filtering unit : STREULI SPB4
* With magnetic pre-filter
- Cooling unit for wheel motor
- Electrical cabinet air conditioning
- Mist aspiration : ERNI SC-610/D
- Balancing shaft
- 3 external wheel-holders
- 3 external wheels
- Set of spare parts
13
ID
MA33965
Make
Studer
Model
S36CNC
YOM
2004
Condition
Good Condition
Photo
See Photo
- Number of axes : 3
- Centers height : 175 [mm]
- Distance between centers : 1000 [mm]
LINEAR AXES
- Grinding length : 500 mm
- Travels X x Z : 267 X 650 [mm]
WHEELHEAD
- Auto. orientation 2 positions, adjustable from : +/-8,5 [°]
- External wheel dimensions : 500 x 80 x 203.2 [mm]
- Grinding wheel holder headstock power : 7,5 [kW]
- Cutting speed : 44 [m/s]
WORKHEAD
- Taper type : CM5
- Axis C : +/-0.5[°]
- Power : 1[kW]
- Rotation speed : 30-1000 [Rpm]
TAILSTOCK
- Taper type : CM3
- Quill travel : 35 [mm]
- Quill diameter : 50 [mm]
- Max. part weight between centers : 130 [kg]
ELECTRIC SUPPLY
- Supply voltage : 400V 50 Hz
- Machine dimensions : 2700 x 2350 x H. 2100 [mm]
- Weight : 4 000 [kg]
HOURS
- working hours : 17.775 [h]
EQUIPMENT
- CNC FANUC 16i-TA control
- Pictogramming
- Studer RELEASE C
- Electronic handwheel
- SENSITRON
- Dynamic balancing device : Hydrobalance HBA 40000-1
- Automatic lenght probe : MOVOMATIC C25
- Automatic outer diameter probe : MOVOMATIC
- Automatic grinding wheel safety guard
- Fixed wheeldresser upon workhead
- Coolant tank : 375 [l]
- Paper filtering unit
- Mist extractor
- Wheel-holders collection
14
ID
MA33963
Make
Kellenberger
Model
UR175/1000
YOM
1998
Condition
Good Condition
Photo
See Photo
|
See Video
grinding diameter: 350 mm
grinding length: 1000 mm
centre height: 175 mm
grinding wheel size: 400 x 63 (50) x 127 mm
control Kelco 80 CNC
internal grinding spindles 1
x-axis: 320 mm
weight of the machine ca. 5,8 t
dimensions of the machine ca.: 3,6 x 2,0 x 2,2 m
Control: CNC
15
ID
MA33962
Make
SCHAUDT MIKROSA BWF
Model
PF61S/1000
YOM
2000
Condition
Good Condition
Photo
See Photo
grinding diameter 520 mm
grinding length 1000 mm
centre height 260 mm
total power requirement kW
weight of the machine ca. 10 t
dimensions of the machine ca. 20 m
workpiece weight max. 500 kg
work piece spindle speed 1000 U/min
grinding wheel diameter 750 mm
grinding wheel width 200 mm
Control: Siemens 840 D
16
ID
MA33961
Make
Schaudt,Germany
Model
ZX11N600
YOM
2001
Condition
Good Condition
Photo
See Photo
grinding diameter: 300 mm
grinding length: 600 mm
centre height: 180 mm
swing dia. :360 mm
workpiece weight :80 kg
max. dia. of grinding wheel: 500 mm
grinding wheel width: 80 mm
grinding wheel hole diameter: 203,2 mm
peripheral speed: 45 m/sec
machine weight ab. 4900 kg
Control: SIEMENS 840 D
Machine equiped with:
- Balancer MARPOSS E 82
- Mesuring unit MARPOSS E 80
17
ID
MA33960
Make
Studer
Model
S36CNC
YOM
1996
Condition
Good Condition
Photo
See Photo
grinding diameter: 300 mm
grinding length: 1000 mm
centre height :175 mm
weight of the machine ca:. 5 t
CNC control GE Fanuc Series 16-GC
X / Z 267/650 mm
Max. Workpiece weight approx. 80 kg.
18
ID
MA33959
Make
Schaudt,Germany
Model
ZX11CBN600
YOM
1997
Condition
Good Condition
Photo
See Photo
grinding diameter :300 mm
grinding length: 600 mm
centre height: 180 mm
swing dia. :360 mm
clamping length max.: 1000 mm
max. workpiece weight between centers: 80 kg
max. workpiece weight -without tailstock: 50 kg
max. dia. of grinding wheel: 500 mm
grinding wheel width ;100 mm
grinding wheel hole diameter: 203,2 mm
peripheral speed :45 m/sec
grinding motor: 10 kW
Quick traverse speed Z + X; 10000 mm/min.
spindle speeds: 1 - 1200 1/min.
taper in workpiece headstock: 4
tailstock quill diameter: 50 mm
tailstock quill taper MT 4
tailstock quill stroke: 40 mm
dimensions of the machine ca. 2,7 x 2,4 x 2,1 m
total power requirement: 25 kW
weight of the machine ca. 5,5 t
Control: CNC SIEMENS 840 C
2 - Axis-.Cylindrical Grinding Machine with:
- CBN - Grinding wheel 400 mm / 100 m/sec.
- Balancer and Messuring Device MARPOSS
19
ID
MI7347
Make
Newall,British
Model
KU16
YOM
Condition
Good Condition
Photo
See Photo
swing over bed: 405mm,
maximum distance between centres :1600mm,
wheel speeds: 1750mm,
wheel size: 400 x 40mm,
work head speeds: 23 – 260rpm,
1 axis DRO, live and dead centre on the work head,
approximate dimensions: 4000 x 1700 x 1700mm,
approximate weight: 5000kg
UNIVERSAL CYLINDRICAL GRINDER COMPLETE WITH DOUBLE SWIWEL WORKING HEAD, SWIVELLING WORKING HEAD
20
ID
MA32833
Make
CETOS
Model
BUB 50 B CNC-3000
YOM
2004
Condition
Good Condition
Photo
See Photo
Control SIEMENS 840D
centre distance 3000 mm
stroke of the table max. 3200 mm
table feed 0,001 - 4000 mm/min
rapid traverse of table 9 m/min
table swivelling +/- +4/-2 Grad
grinding wheel size 500x100x203 mm
peripheral speed 18 - 36 m/sec
spindle speeds 6 - 900 U/min
grinding head swivelling 90 Grad
tailstock quill taper MT 5
tailstock quill stroke 80 mm
grinding spindle drive 9,5 kW
working spindle drive 0,1 - 3,1 kW
hydraulic motor 2,2 kW
max. workpiece weight between centers 500 kg
workpiece weight in steadies max. 840 kg
total power requirement kW
weight of the machine ca. 14,1 t
dimensions of the machine ca. 8,9 x 3,42 x 1,94 m
* CNC control SIEMENS SINUMERIK 840D with control panel OP 10
and color flat screen TFT 10.4 "with machine control panel MPC 19"
* Remote control panel with electronic handwheel for the infeed of
the wheelhead and the table
* 2 external grinding spindles (S1 S2) and one internal grinding spindle (S3 )
* Internal grinding spindle FOINIJA FK 80x250/25
* SIMODRIVE 611D digital servo drives for axes X, Z, C
* CNC fully controlled "B" axis + 195 ° / -30 ° - smallest
programmable adjustment of the wheelhead
over CNC program 0,001 °
* CNC fully controlled "C" axis in mutual interpolation
with "X" or "Z" axis
* Full cover of the machine
* Workpiece clamping control in axial axis
* Coolant system with belt filter system KNOLL VRF 300
* Suction
* Electric 2-jaw bezel Ø 12-70
* 2 center points MK 5
* 3-point bezel Ø 30-130
21
ID
MI7151
Make
Tos Czech
Model
BK5
YOM
Condition
excellent working condition
Photo
See Photo
Center Height - 160 mm
Max. Diameter of Job - 320 mm
Length of Job - 1500 mm
Grinding Wheel Diameter - 500 mm
Grinding Wheel Width - 80 mm
- Equipped with Internal Grinding Attachment.
- With 2 x 2-point steady, 2 x 3-point steady, 3 x wheel dressers.
- With Hydraulic Rapid Forward/Backward Movement of Wheel-head.
- Swivel-type Grinding Wheel-head.
- With Automatic Depth Adjustment "Auto-Cut"
- Complete with Coolant Filtration Unit, Pump & Tank.
- With Wheel Balancing Stand, covers, etc.
22
ID
MI7149
Make
Newall,British
Model
FU16
YOM
Condition
Good Condition
Photo
See Photo
Newall KU16 Universal Cylindrical Grinder)
swing over bed 405mm,
maximum distance between centres 1600mm,
wheel speeds 1750mm,
wheel size 400 x 40mm,
work head speeds 23 – 260rpm,
complete with double swivel wheel head,
swivelling work head,
1 axis DRO, live and dead centre on the work head,
approximate dimensions 4000 x 1700 x 1700mm, approximate weight 5000kg
23
ID
MA32049
Make
Jones & Shipman
Model
1311
YOM
1982/1983/1984
Condition
Good Condition
Photo
See Photo
Model - 1311
Swing - 254mm
Center distance - 457mm
Dimensions - 1730x1370x1780mm
Weight - 1540kg
24
ID
MA31869
Make
Tos Czech
Model
BHU40/1500
YOM
1987
Condition
Good Condition
Photo
See Photo
Max. diameter: 400 mm
Max. length: 1500 mm
Grinding Wheel: 500 x 80 x 203 mm
Spindle cone: MORSE 5
Clamping chuck diameter: 200 mm
25
ID
MA31732
Make
Studer
Model
S145 CNC
YOM
2000
Condition
excellent working condition
Photo
See Photo
CE marked
Equipped with:
-grinding wheels dia. 15mm for internal grinding: 3pcs
-grinding wheels dia. 22mm for internal grinding: 2pcs
-grinding wheels for external grinding:5pcs
-set of collets:30pcs
-4 spindles
-dresser
-3 rolls of gauze
Machine has 22382 working hours
Quantity: 1999/2000 two machines are available
26
ID
MA31731
Make
Studer
Model
S145 CNC
YOM
1999
Condition
Good Condition
Photo
See Photo
CE marked
Equipped with:
-grinding wheels dia. 15mm for internal grinding: 3pcs
-grinding wheels dia. 22mm for internal grinding: 2pcs
-grinding wheels for external grinding:5pcs
-set of collets:30pcs
-4 spindles
-dresser
-3 rolls of gauze
Machine has 89439 working hours, needs a repair of hydraulic part
Quantity: 1999/2000 two machines are available
27
ID
MA31390
Make
Toyoda,Japan
Model
GUP 40-180
YOM
1978
Condition
Good Condition
Photo
See Photo
Swing over table : 500 mm
Distance between centers : 1800 mm
Weight of machine : 6 ton
28
ID
MA30295
Make
Jones & Shipman
Model
JS1300
YOM
Condition
Very good condition
Photo
See Photo
250 mm x 650 mm capacity,
with internal device, swivel head, separate dresser.
29
ID
MI6627
Make
Tos Czech
Model
2UD/750
YOM
Condition
Good Condition
Photo
See Photo
Admit Between Centers: 750 mm
Center Height: 150 mm
Swing Diameter: 300 mm
30
ID
MI6625
Make
Jackmill
Model
JMC1000H
YOM
Condition
Photo
See Photo
Maximum grinding diameter: 300 mm
Admit between centers: 1000 mm
31
ID
MI6519
Make
Tos Czech
Model
YOM
Condition
Good Condition
Photo
See Photo
1 meter
Swing: 300 mm,
ABC: 1000 mm,
OD,ID
Complete With 3 Steady ,Drasser ,Colant Tank
32
ID
MI6505
Make
Tos Czech
Model
2UdP2-500
YOM
Condition
Good Condition
Photo
See Photo
Center height: 155 mm,
Swing diameter: 290 mm,
Equipped 3 wheel dressers, full steady, Half steady, coolant tank, Internal grinding
33
ID
MI6503
Make
G.Rastelli,Italy
Model
R5A
YOM
Condition
Excellent condition,under power
Photo
See Photo
Center height: 155 mm,
Swing diameter: 300 mm
34
ID
MA29346
Make
Fritz Studer
Model
YOM
1999
Condition
Good Condition
Photo
See Photo
Height of centers: 80 mm
Distance between centers: 400 mm
Stroke of longitudinal carriage: 1-420 mm
Table speed: 0,1-3,5 m/min
Range of headstock revs: 60-1200 rpm
Grinding wheel:
-Diameter: 300 mm
-Width: 30 mm
-Opening: 127 mm
Rapid feed: 30 mm
Max. work-piece weight:
-Between centers: 20 kg
-In the chuck: 5 kg
Total required power: approx. 5 kW
Occupied area:
-Length: 1770 mm
-Width: 1150 mm
Weight: 900 kg
35
ID
MA28769
Make
MSO,Germany
Model
R228-3000
YOM
1992
Condition
Good Condition
Photo
See Photo
Max diam. 480 mm x 3000 mm length
with Siemens CNC control S 5,
internal grinding attachment,
tailstock, coolant, dressing device
Heidenhain digital measuring DMK 150
Hoffmann balancing device HK 500
36
ID
MA22371
Make
Schaudt,Germany
Model
AR 1500
YOM
1960
Condition
Good Condition
Photo
See Photo
480 X 1500 mm,
Internal grinding device.
37
ID
MA21136
Make
Myford
Model
MG12
YOM
Condition
Good Condition
Photo
See Photo
capacity 200 mm dia x 450 mm.Internal Grinding Attachment.
Precise PVSF Electronic Frequency Converter
38
ID
MA21135
Make
Myford
Model
MG12
YOM
Condition
Good Condition
Photo
See Photo
capacity 200 mm dia x 450 mm.Internal spindle. Equipment
39
ID
MA21134
Make
Jones & Shipman
Model
1310EIUR
YOM
Condition
Good Condition
Photo
See Photo
capacity 200 mm dia x 450 mm.Internal spindle. Equipment
40
ID
MA19025
Make
WMW,Germany
Model
YOM
1968
Condition
Good Condition
Photo
See Photo
complete with internal grinding attachment and steadies