VKengg.co.in

Category : Grinding Machines

Sub-Category : Grinder Internal

Total Machines Found : 51

Select	| Machine Details
1	ID MI8185 Make Jung Model D22 YOM Condition Good Condition Photo See Photo smallest effectively grindable bore: 14 mm largest grindable bore: 150 mm (probably larger) grinding length (without face grinding device) : 250 mm grinding length (with face grinding device) : 220 mm Headstock spindle 6 work-piece speeds, adjustable: 46 – 270 rpm rotatability of head stock: 90° each work piece spindle bore: Ø 44 mm hollow cone of head stock: metric 50 distance of spindle axis to table center: 250 mm largest distance head stock / grinding support: 935 mm head stock incline: to front – back 30° each working table incline: to front – back 5° each grinding spindle size: Ø 80 mm x L 350 mm (overall width ca. 440 mm) cup wheel for face grinding device: Ø 120 mm grinding operations infinitely adjustable grinding speed grinding operation by hand adjustment grinding operation by hydr. grinding adjustment grinding operation by roughing / finishing total connected load: ca. 8,0 kW weight: ca. 3.200 kg
2	ID MA35273 Make Voumard Model 5A YOM Condition Good Condition Photo See Photo Capacity: ø5-200x250 mm WORKING CAPACITY   Max distance workhead - wheel: 550 mm Centres height: 180 mm Max grinding dept: 250 mm Max grinding diameter: 5-200 mm WHEELHEAD   Wheel speed: 3600-40000 Rpm TABLE   Cross speed: 0-10.000 mm/min WORKPIECE HEAD   Rotating speed: 125-1000 Rpm Tilt: 0-90 ° Machine total weight: 2250 Kg
3	ID MA35175 Make Voumard Model 403L12YV1.0 YOM 1979 Condition Good Condition Photo See Photo Grinding diameter: up to 450 mm Maximum grinding depth at a maximum grinding table stroke of 1.000 mm: 450 mm Minimal grinding table stroke: 2 mm Grinding table number of strokes: 0 ÷ 250 / min Grinding table speed: 0 ÷ 18m / min Maximum longitudinal adjustment of the grinding headstock at a maximum grinding table stroke of 1.000 mm: 500 mm Cross adjustment of the grinding headstock: 100 mm Maximum length between the workpiece spindle nose and the pivot point of the workpiece table: 1.260 mm Swiveling of the workpiece spindle table without surface grinder: 20° With unit Y Maximum path of the transversal workpiece table: 220 mm Equpiment: Magnetic chuck Ø 500 mm Manufacture SAV Coolant device with paper belt filter Various measuring probes User guide / Documentation Machine weight (net) ca. 7.000 kg
4	ID MA35035 Make WOTAN Model S 313/12 YOM 1982 Condition Good Condition Photo See Photo Control :- Conventional 4 Jaw Chuck Dia 1200 MM max. workpiece diameter:- 1200 MM grinding depth:- 740 MM workpiece dia. over bed :- 1200 MM max. bore diameter to be ground :- 700 MM workpiece length - max.750 MM workpiece weight :- 3000 KG taper angle:-30° table speeds :- 0,1-8 m/min spindle motor:-22 KW grinding spindel dia.:- 200MM Length movement of the table:-1200 MM total power requirement:- 30 KW weight of the machine ca.:- 13 T
5	ID MI7815 Make Heald Model 74 YOM Condition Good Condition Photo See Photo Swing: 635 mm Work head Swivel: yes Work head Power: 2.2 kW Wheel Power: 5.6 kW
6	ID MA34237 Make Okamoto Model IGM-15EX YOM 2006 Condition Good Condition Photo See Photo Okamoto Precision(Fanuc) 6inch 3 claw Chuck cover Internal swing 260 Max work length 125 S:X170*Z500 (GMN/high speed spindle (HSX)/ Oil air lubrications)
7	ID MA33926 Make VEB Model SI8 YOM Condition Good Condition Photo See Photo Grinding diameter - 75..630 mm Working diameter - 800 mm Grinding depth - 500 mm Dimensions - 5380x2800x3300 mm Weight - 9500 kg
8	ID MI7213 Make Spandau Model SJ11 YOM Condition Good Condition Photo See Photo Center Height - 240 mm Max. Diameter of Job - 480 mm Max. Ground-able Internal Diameter - 225 mm Table Longitudinal Travel - 500 mm Max. Diameter of Job (inside protection cover) - 350 mm - Equipped with Tangential type Face Grinding attachment. - Auto-cycle Operation including automatic speed change, automatic wheel dressing etc. - Equipped with AC Drive for Work-Head Speed control. - Hydraulic Wheel Dresser for Internal & Face Grinding Wheels. - Complete with coolant tank & pump etc.
9	ID MI7202 Make Veb,German Model YOM Condition Good Condition Photo See Photo Description attached in photos.
10	ID MI7200 Make WMW Model BWF SI 8S 500/630 YOM Condition Good Condition Photo See Photo MIN. MAX WORKING DIAMETER 75 - 630 MM, MAX. GRINDING DEPTH 500 MM, MAX SWING 800 MM TRASVERSAL STROKE OF WORKPIECE HEAD 650 MM, MAX INCLINATION OF WORKING HEAD 30°, WHEEL SPEED REVOLUTIONS 30 MT/S WHEEL TABLE STROKE 1200 MM, MIN-MAX WHEEL DIAMETER 40 - 250 MM COMPLETE WITH: AUTO-CENTERING CHUCK Ø 600 MM, FACING ATTACHMENT, RECOVERY TANK WITH PAPER MAGNETIC SEPARATOR INTERNAL SPINDLES
11	ID MI7199 Make Voumard Model 5A YOM Condition Good Condition Photo See Photo Grinding diameter : 5-200 mm, Plunge : 250 mm, Workpiece diameter : 350 mm, Workpiece length : 1000 mm, Power requirement : 7 kw, Weight ca.: 3500 kg.
12	ID MI7198 Make Voumard Model 5S YOM Condition Good Condition Photo See Photo Internal grinding diameter: From - up to 5-200 mm, Grinding depth 250 mm, Center height 180 mm, Swing diameter of protecting cap 300 mm, Max. workpiece length with steady 500 mm, Workpiece spindle speeds: Number 6 From - up to 125-1000 rpm. Table speed: Inf. variable: From - up to 0-30 m/min. Size of machine: width/depth/height 2900x1300x1700 mm. Weight 2500 Kg.
13	ID MI7197 Make WMW Model SI6 YOM Condition Good Condition Photo See Photo Specification attached.
14	ID MA32627 Make VEB Model SIP 400x500 YOM Condition Good Condition Photo See Photo internal diameter 560 mm grinding depth 500 mm swing diameter 860 mm Grinding length max. 500 mm Grinding length in. 30 mm centre height 435 mm dimensions of the machine ca. 4,0 x 1,8 x 2,1 m Weight 5600 kg
15	ID MA31463 Make WMW Model BWF SI 4/1 YOM Condition Good Condition Photo See Photo Grinding length - 250mm Grinding diameter - 250mm Swing diameter - 450mm Weight - 3800kg
16	ID MA31210 Make WMW Model SL4 YOM 1987 Condition Very good condition,Under power Photo See Photo Grinding hole Dia 5-200 (250) mm Grinding length/depth 200 (250) mm Max Dia workpiece (swing dia) 370/450 (with/without safety cover) Taper angle 60 degrees Spindle head speed 70-1375 rpm Grinding wheel spindle speed 11500- 29000 rpm Grinding wheel dia 100x80 mm Table movement 560 mm Single Dresser Total power 17 kW Machinery dimensions 2550x1500x2550 mm Weight 3.8 t
17	ID MA31154 Make Model SIW 5UB YOM Condition Good Condition Photo See Photo Outter diameter of grinded rings - 320mm Min diameter of grinded hole - 125mm Width of grinded detail - 100mm Max weight of grinded detail - 30kg Spindle hole diameter - 42mm Weight - 6500kg
18	ID MI6760 Make Parisudha Model YOM Condition Good Condition Photo See Photo Internal Grinder
19	ID MI6599 Make Voumard Model 52A YOM Condition Good Condition Photo See Photo Internal Grinding Diameter - 200 mm, Grinding Depth - 200 mm, Center Height - 280 mm, Stroke of Table - 3 mm to 500 mm, Workpiece Spindle Speed - 180 rpm to 850 rpm, Grinding Spindle Speed - 3600 rpm to 40,000 rpm, With Face Grinding Attachment. Manual of the machine is available with the machine.
20	ID MA29892 Make Tripet Model MUR100 YOM Condition Good Condition Photo See Photo Max. diameter: 15 mm, Min. diameter: 0.5 mm Grinding depth :75 mm Centre height: 60 mm Distance between centres :125 mm Max. work piece diameter :80 mm Workpiece spindle speeds: (stepless): 150-1500 rpm Spindle hole :12 mm Grinding table travel: max :225 mm Table speeds: (stepless): 1- 8 m/min Voltage 50 Hz 3x 220/60Hz: Volt Workpiece spindle motor: 0.3 kW Machine's weight about: 650 kg
21	ID MA29869 Make Glauchau Model SI/1AS-Nx710 YOM 1990 Condition Good Condition Photo See Photo Workpiece's length - 2000 mm Workpiece's diameter - 500 mm Max length of internal grinding - 710 mm Diameter of internal grinding - 40..400 mm Weight - 7600 kg
22	ID MA29866 Make Jotes Model SOJ-10 YOM 1988 Condition Good Condition Photo See Photo Internal diameter:100 mm Grinding depth:160 mm Swing diameter:300/450 mm Weight of the machine ca.:2900 kg Max. outer diameter:300/450 mm
23	ID MA29835 Make Voumard Model 5 YOM Condition Good Condition Photo See Photo Internal grinding diameter - 200 mm Grinding depth - 250 mm Center height - 180 mm Workpiece's length - 550 mm Spindle hole - 50 mm Dimensions - 2800 x 1600 x 2000 mm Weight - 2500 kg
24	ID MA29665 Make WMW BWF Model SI4/1 YOM 1988 Condition Good Condition Photo See Photo Machine: Weight: 3800 kg Length: 3.1 m Width: 1.9 m Height: 2 m Rated power: 37 n / a Nominal voltage: 380 V Rated current: 60 A Frequency: 50 Hz Accessories: Plan grinder Einkornabrichter Cycle control Fortuna grinding spindle with speed of Max 17,000 1 / min. Grinding spindle taper: Fortuna cone F1 / FIV80 Einkornabrichter for internal grinding spindle Workpiece speed to 1500 1 / min Workpiece holder: SK50 10 different grinding points Remarks: Internal grinding up to Ø160 mm Workpiece schenkbar to 30 ° Traverse grinding spindle of 680mm (from the front workpiece holder to front edge grinding spindle) Security cover for the workpiece spindle is missing!
25	ID MA29601 Make WMW,Germany Model SIW-3/1-B YOM Condition Good Condition Photo See Photo There are 2 such machines available. 1 is - complete , in working condition. 2 - is gabbed with electrics, Min work piece's diameter: 15 mm, Max work piece's diameter: 63 mm, Min machined hole's diameter: 10 mm, Max machined hole's diameter: 58 mm, Min work piece's length: 8 mm, Max work piece length: 70 mm.
26	ID MA29198 Make Studer Model S140 YOM 2005 Condition Good Condition Photo See Photo Swing diameter : 140 mm, Measuring system, Compound slide, progr. cutting speed, Chuck workhead, Increased accuracy of concentricity, Siemens 840D. Gap elimination. Seckler feeding unit Type HZF 101. Marposs measurement amplifier E9066.
27	ID MI6423 Make Voumard Model 5A YOM Condition Good Condition Photo See Photo Grinding diameter : 5-200 mm, Plunge : 250 mm, Workpiece diameter : 350 mm, Workpiece length : 1000 mm, Power requirement : 7 kw, Weight ca.: 3500 kg.
28	ID MI6422 Make Buderus Spandau Model SJ351 YOM Condition Good Condition Photo See Photo aa
29	ID MI6421 Make Jotes Model YOM Condition Good Condition Photo See Photo Swing : 270 mm, Centre height : 135 mm, Between center : 1000 mm.
30	ID MA29110 Make WMW,Germany Model SI61ASNx500 YOM 1984 Condition Good Condition Photo See Photo Internal diameter: 400 mm, Grinding depth: 500 mm, Swing diameter: 550 mm, Centre height: 260 mm, Total power requirement: 15 kW, Dimensions: 4000 x 2400 x 2000 mm, Weight: 6500 kg. Qty : 2 nos.
31	ID MI6395 Make Fortuna,German Model YOM Condition Good Condition Photo See Photo Maximum dia: 400 mm, Max length: 150 mm, Face plate holding arrangement suitable for mass production for high finish jobs.
32	ID MI6390 Make Cincinnati Milacron,Austria Model Heald271B YOM Condition Good Condition Photo See Photo Maximum dia: 150 mm, Max. length: 150 mm, Special features: Auto programmable, Suitable for mass production, With head motor, Tail motor and hydraulic pump
33	ID MA27169 Make Voumard Model 6AP YOM Condition Good Condition Photo See Photo Automatic & Semi automatic machine cycle combined. Grinding dia : 25-380 mm, Grinding depth : 250 mm, Center height : 300 mm, Max working dia : 500 mm, Spindle motor : 7,3 kW, Overall dimension :- Width : 2950 mm, Depth : 1700 mm, Height : 2000 mm, Weight : 4600 kg. Accessories :- High frequency spindle diameter : 20,000 RPM, Wheel dresser, Hydraulic unit.
34	ID MI6104 Make WMW Model SI8 YOM 1995 Condition Good Condition Photo See Photo Internal diameter : 900 mm, Grinding depth : 500 mm, Swing diameter : 1000 mm, Workpiece spindele swivable : +/- 30 Deg, Turning speed range : 16-250 rpm, Table speed : 0.05 -8 mm, Adjustment : 1 division = 800 mm, Electrics voltage/frequency : 380/50 m/min, Power requirement : 7,5 kW, Weight of the machine ca. : 9.5 Ton, Dimensions of the machine ca. : 4,9 x 2,2 x 2,0 m, Accessories/Features :- Face grinding attachement, Cooling device, Magnetic seperator, Chuck.
35	ID MA27166 Make Wotan,West German Model SN213/8RU YOM 1976 Condition Good Condition Photo See Photo Internal diameter : 900 mm, Internal dia. - min. : 20 mm, Grinding depth : 500 mm, Cross travel : 250 mm, Turning speeds : 2860 U/min, Spindle bore : 120 mm, Spindle length : 300 mm, Total power requirement : 17,0 kW, Space requirements approx. L x W x H : 5,0 x 4,0 x 2,5 m, Dimensions of machine : 4,25 x 2,75 x 2,3 m, Dimensions electric cabinet L x W x H : 1,0 x 0,45 x 2,0 m, Weight of the machine ca. : 8,8 t. Grinding spindle intake 0,0025...0,025 mm via double stroke - Distance work piece spindle - grinding spindle : 1400 mm, Details for workpiece head stock :- Tranverse travel approx. : 750 mm; Longitudinal travel approx. : 350 mm; Swivebale : 90 degrees, Swing over bed max. : 1200 mm, rpm 11-220, worke piece weight 795 kg, drill hole 82 mm, workpiece holder via face slide dia.=800 mm+1100 mm, All other details are referring to the grinding head stock. Equipment :- Dressing device.
36	ID MI6045 Make WMW,Germany Model SI4 YOM Condition Good Condition Photo See Photo Internal diameter : 125 mm, Grinding depth : 200 mm, Dimensions of grinding wheel : 90 x 70 x 15-40 mm, Number of turn of spindle head : Schleif spindle : 1150 U/min, Spindle hole : diameter x length : 170 x 315 mm, Grinding head swivelling : 45 grad, Number of turns pf spindle head : Werkstuck : 45 - 710 U/min, Slide cross : Werkstuck spindle : 1 mm, Table travel : 300-560 mm, Feed : 500-10000 mm/nib, Total power requirement : 23 kW, Weight of the machine ca. : 5,3 t, Dimensions of the machine ca. : L :4,6 x B :1,4 x H : 2,0 m, Dimensions of the machine ca. : E-schrank : 1,2 x 0,6 x m
37	ID MI5779 Make Tos Czech Model BDU250A YOM Condition Good Condition Photo See Photo Centre Height: 250mm Between Centre: 800mm Swing: 500mm
38	ID MI5775 Make Voumard Model 5A YOM Condition Good Condition Photo See Photo Centre Height : 185 mm, Between Centre : 1600 mm, Swing : 350 mm, High Frequency Generator 600 X 150, with long Pipe Orientation, Table Course : 600 mm.
39	ID MA21525 Make WMW,Germany Model SIW5E YOM 1978-1988 Condition Good Condition Photo See Photo outer job dia 280 mm, max width of job 80 mm, keyseat(groove) radius -30 mm, max weight of job 14 kgs,dia of hole in spindle 50 mm, stepless speed of spindle job 50-500 RPM, max stroke length of table 350 mm, min stroke length of table 120 mm, motor power 29,5 kW, dimensions 3090 x 2260 x 2040 mm, machne weight 7 tons. -9 pcs.
40	ID MA21522 Make WMW,Germany Model SIW3B YOM 1978-1988 Condition Good Condition Photo See Photo external dia of product 15-110 mm, internal dia of product 10 mm, width of product 8-40 mm, conic corner of product 60 degrees, number of turns,spindle 125-2000 , table course 200 mm, table course min 70 mm, quantity of double courses of a table 80-600 , machine tool weight 3,2 tons - 31 pcs.
41	ID MA19515 Make WMW,Germany Model SI61ASNx500 YOM 1984 Condition Good Condition Photo See Photo dia of work internal 40-400 mm, dia of work external 400 mm, max grinding length 500 mm, revs of spindle 2640/// 16500 UPM/rpm , power 16 kW , weight 5,8 tons.
42	ID MA18769 Make WMW BWF Model SI4 YOM 1984 Condition Good Condition Photo See Photo Working diameter – 5-200 mm; Working length – 200 mm.
43	ID MA18405 Make Voumard Model 3APDB YOM Condition Good Condition Photo See Photo Internal grinding diameter: From - up to 3-50 mm, Grinding depth 80 mm, Center height 200 mm, Swing diameter of protecting cap 300 mm, Workpiece spindle speeds: Number 5, From - up to 350-1220 rpm , Spindle bore 40 mm, Grinding table travel: Min.- max 2-300 mm, Table speed: Inf. variable: From - up to 0-10 m/min, Motor 380 Volt, Workpiece spindle motor 1,0 HP, Size of machine: width/depth/height 2200x1400x1900 mm, Weight 2500 Kg. Accessories and equipment: Internal grinding spindle: Diameter 70 mm, Spindle speeds up to 22000 rpm, Wheel dressing attachment. Hydraulic. Coolant.
44	ID MA18404 Make Voumard Model 32A YOM Condition Good Condition Photo See Photo Internal grinding diameter: From - up to 3-50 mm, Grinding depth 80 mm, Center height 200 mm, Swing diameter of protecting cap 240 mm, Max. workpiece diameter 300 mm, Workpiece spindle speeds: Number 5, From - up to 385-1285 rpm, Max. swivelling 120 Degrees, Spindle bore 25 mm, Grinding table travel: Min.- max 0-250 mm, Table speed: Inf. variable: From - up to 0,1-10 m/min, Motor 380 Volt, Drive for internal grinding spindle 6 HP, Size of machine: Length/width/height 2000/1300/1820 mm, Weight 2300 Kg. Accessories and equipment: Wheel dressing attachment. Hydraulic.
45	ID MA18402 Make Voumard Model 213B2F YOM Condition Good Condition Photo See Photo Internal grinding diameter with motor spindle: From - up to 1-100 mm, Grinding depth 120 mm, Center height 235 mm , Workpiece spindle speeds: Number 6 , From - up to 150-1500 rpm, Max. swivelling 90 Degrees, Spindle bore 30 mm, Grinding table travel: Min.- max 2-300 mm, Max. distance from workhead spindle face: Up to grinding spindle holder 100 mm, Table speed: Inf. variable. Up to 20 m/min., Motor 380 Volt, Size of machine: width/depth/height 3500x2000x2000 mm, Total power requirement 13,5 HP, Weight 2650 Kg. Accessories and equipment: Face grinding attachment. Dressing attachment: Hydraulic. Diameter of internal spindle 165 mm Number 1 Spindle speeds 28000 rpm Power chuck: Diameter 165 mm Coolant.
46	ID MA18401 Make Voumard Model 213B2F3 YOM Condition Good Condition Photo See Photo Internal grinding diameter: Up to 100 mm, Grinding depth 230 mm, Center height 280 mm, Swing diameter of protecting cap 220 mm, Workpiece spindle speeds: Number 6, From - up to 150-1500 rpm, Max. swivelling 90 Degrees, Spindle bore 30 mm, Grinding table travel: Min.- max 2-350 mm , Table speed, inf. variable 0-20 m/min, Motor 380 Volt, Workpiece spindle motor 0,5/0,75 HP, Drive for internal grinding spindle 4,0/5,4 HP, Weight 4500 Kg, Accessories and equipment: Internal grinding spindle: Diameter 90 mm, Spindle speeds up to 22000 rpm, Face grinding attachment with tangential wheel. 3-jaw chuck: Diameter 220 mm, Wheel dressing attachment. Hydraulic. Coolant.
47	ID MA18400 Make Voumard Model 213B2F3 YOM Condition Good Condition Photo See Photo Internal grinding diameter with motor spindle: Up to 100 mm, Grinding depth 230 mm, Center height 280 mm, Swing diameter of protecting cap 230 mm, Workpiece spindle speeds: Number 3, From - up to 300-1500 rpm, Max. swivelling 90 Degrees, Spindle bore 30 mm, Grinding table travel: Min.- max 2-350 mm, Table speed, inf. variable 0-20 m/min, Motor 380 Volt, Workpiece spindle motor 0,16/0,75 HP, Weight 4800 Kg. Accessories and equipment: Measurment device: Manufacture MARPOS, Internal grinding spindle: Diameter 100 mm, Spindle speeds up to 21000 rpm, Face grinding attachment with tangential wheel. 3-jaw chuck: Diameter 220 mm, Wheel dressing attachment. Hydraulic. Coolant.
48	ID MA18398 Make Voumard Model 5S YOM Condition Good Condition Photo See Photo Internal grinding diameter: From - up to 5-200 mm, Grinding depth 250 mm, Center height 180 mm, Swing diameter of protecting cap 300 mm, Max. workpiece length with steady 500 mm, Workpiece spindle speeds: Number 6 From - up to 125-1000 rpm. Table speed: Inf. variable: From - up to 0-30 m/min. Size of machine: width/depth/height 2900x1300x1700 mm. Weight 2500 Kg. Accessories and equipment: Wheel dresser: Hydraulic.
49	ID MA18397 Make Voumard Model 5S YOM Condition Good Condition Photo See Photo With semi-automatic cycle for grinding of cylindrical- and taper bores for small, middle produce or single pieces. Indirect measurement through dressing diamond. Internal grinding diameter: From - up to 5-200 mm, Grinding depth 250 mm, Center height 180 mm, Swing diameter of protecting cap 290 mm, Max. workpiece length with steady 550 mm, Workpiece spindle speeds: Number 6, From - up to 120-1000 rpm, Max. swivelling 180 Degrees, Spindle bore 50 mm, Grinding table travel: Min.- max 3-600 mm, Table speed: Inf. variable: From - up to 0-10 m/min, Motor 380 Volt, Drive for internal grinding spindle 2,4 HP, Size of machine: width/depth/height 2400x1250x1670 mm, Weight 2000 Kg. Accessories and equipment: Internal grinding spindles: No 1, Diameter 90 mm, Wheel dressing attachment. Hydraulic. Coolant.
50	ID MA18155 Make Heald Model 271 YOM Condition Good Condition Photo See Photo set up on 50 cycle , single point dresser , guards , sizematic feedbox , spark out timers, variable speed workhead - several available.
51	ID MA10985 Make Tos Czech Model BDU80 YOM 1989 Condition Good Condition Photo See Photo swing max. 220 mm,min dia of grinded hole 3 mm, max. dia of grinded hole 120 mm, max. length of grinding depending on aperture A 150 mm,max. lifting lengthwise table 550 mm,speed follower spindle 0-450 ot/min., speed spindle sharpening 10,000-60,000 ot/min., ground area 2630 x 1490 mm (lxw), machine weight 2650 kg