Category : Grinding Machines

Sub-Category : Grinder Internal CNC

Total Machines Found : 5

Select | Machine Details
 
  1
IDMA35357
MakeStuder
ModelS110
YOM2014
ConditionGood Condition
PhotoSee Photo
Technical Details
Grinding length : 120 (mm)
Center height : 102 (mm)
Strokes (x/z) : 450 x 200 (mm)
Max feeds (x/z) : 12000 (mm/min)
Spindle Support
spindle number : 2
Partholder Headstock
Part-holder headstock max. rotation speeds : 1500 (Rpm)
Spindle clearance : 28.6 (mm)
power : 1.4 (kW)
Fastening taper : A2.4/CM5
Torque : 150 (Nm)
B-axis angle (manual) : +/- 2
C axis : 0.0001
Supply
Installed power : 34 (kVA)
Dimensions
Floor diamensions : 3600 x 2800 (mm)
Weight : 2600 (kg)
Hours
Working hours : 3500 (h)
Equipment
Kind : Internal grinder Cnc
Studer WIN software
Remote control
Spindle 1 : 60000 (tr/mm)
Spindle 2 : 90000(tr/mm)
Control unit for pneumatic clamping
Coolant tank with paper filtration
Cooling unit for spindle cooling
Knurling wheel diamond grinding device
two 3-jaws chucks
set of grinding wheels
 
  2
IDMA29903
MakeOkuma,Japan
ModelGI20N
YOM1992
ConditionGood Condition
PhotoSee Photo
Swing over Table : 500 mm,
Max. Work Length : 200 mm,
Wheel Infeed Slide (X axis) : 202 mm,
X Axis Feed Rate : 0008 .4 IPM,
X Axis Rapid Rate : 472.4 IPM,
Table (Z Axis ) Travel : 500 mm,
Z Axis Feed Rate : 236.22 IPM,
Large Quantity of Extras,
OSP 5000-G CNC Controls.
 
  3
IDMA29078
MakeStuder
ModelS45-4
YOM1989
ConditionGood Condition
PhotoSee Photo
Centre height above worktable: 175 mm
Grinding length: 200 mm
Max. grinding depth: 170 mm
Grinding bore:
-Min.: 1,5 mm
-Max.: 340 mm
Total power required: ~12 kW
Voltage: 380 V; 50 Hz
Required area: 4700 x 4000 mm
Height: 2130 mm
Weight: 2700 kg
 
  4
IDMA28220
MakeBuderus
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max bore diameter : 5-140 mm,
Max grinding depth : 150 mm,
Max swivel diameter over the table : 410 mm,
Workpiece spindle speeds NC programmable : 0-3000 U/min,
Table travelling :-
X axis : 1280 mm,.
Z axis : 300 mm,
Table speed infinitely variable :-
X axis : 0-90 m/min,
Z axis : 0-30 m/min,
Infeed speed infinitely variable : 0,01-15 mm/min,
Infeed depending on the travelling : 0,0005-0,1 mm,
Boring workpiece spindle : 45 mm,
Workpiece spindle flange : 220 mm,
Acceptance dia chuck : 140 H6,
Connected load of the machine : 40 kW,
Machine Weight : 8500 kg.
 
  5
IDMA27719
MakeStuder
ModelS145
YOM2007
ConditionGood Condition
PhotoSee Photo
Grinding length : 200 mm,
Internal grinding diameter : 200 mm,
External grinding diameter : 180 mm,
Centres height : 225 mm,
Max. part weight : 80 kg,
CROSS SLIDES :-
Strokes (X/Y) : 120 x 500 mm,
Quick feeds (X/Z) : 5.000 x 10.000 mm/min,
Resolution : 0,0001 mm,
Revolver spindles head.
Automatic B axis with HIRTH coupling : 3,
Orientation positions : 0 / 90 / 180 / 270,
PART HOLDER HEADSTOCK,
Clamping cone : ISO 50,
Spindle stop : 50 mm,
Rotation speeds : 1 to 1000 Rpm,
Power : 2,8 / 3,8 kW,
Q axis swilling angle : +/- 30,
Installed power : 33 kVA,
Dimensions : 3000 x 1933 mm,
Weight : 5700 kg.
Equipment :-
CN FANUC 21i-TB.
Conversational, ISO and Pictogramming mode,
Electronic deported crank handle,
Sensitron 6,
Q axis with automatic swivelling of parts holder headstock,
C axis for form and thread grinding,
1 internal spindle FISCHER MFM 1090 (90.000 Rpm, 4,2 kW, nose HJND 50),
1 internal spindle FISCHER MFM 1242/60 (42 to 60.000 Rpm, 10 kW, nose HJND 28),
1 internal spindle FISCHER MFM 1224/42 (24 to 42.000 Rpm, 12 kW, nose HJND 21),
Fixed truing grinding wheel,
Spindle cooling unit STREULI SKA33,
Lubricating tank 350 litres with pumps,
Paper filter STREULI SPB3-TC63/350 ESK (2008),
Air-conditioning for electric cabinet,
Mist extractor 3NINE Clara 1000 (2007)
Full protection cover,
Set of grinding wheels and internal grinding wheel holders,
Set of diamond grinding wheels for face truing,
1 precision hydraulic chuck 3 jaws SCHUNK Rota P dia. 200,
1 chuck 3 jaws dia. 200,
Numerous sets of jaws,
3 adjustable feet.
top