VKengg.co.in

Category : Milling Machines

Sub-Category : Milling Universal CNC

Total Machines Found : 7

Select | Machine Details
 
  1
IDMA35429
MakeDeckel Maho ,Germany
ModelFP5A
YOM
ConditionGood Condition
PhotoSee Photo
XYZ travel: 710x600x445mm
Spindle taper: SK40
Spindle speed: 6300rpm
Universal table: 820x520mm
Max. table load 500kg
Machine size-LWH: 3760x2150x2400mm
Machine weight: 4600kg
Control : GRUNIDG DIALOG11
 
  2
IDMA35043
Makehermle,Switzerland
ModelUWF1202S
YOM1995
ConditionGood Condition
PhotoSee Photo
Control:HEIDENHAIN TNC426
Travel XYZ:850x630x500mm
Spindle speed:20-4200rpm
Tool holder:SK40
Table size:1200x550mm
 
  3
IDMA34340
MakeTos Kurim
ModelFGS63CNC
YOM
ConditionGood Condition
PhotoSee Photo
4 controlled axes incl. Rotary table ISN 320 CNC
Table clamping area: 630 x 1400 mm
Working stroke:
-longitudinal: 1,120 mm
-transverse: 630 mm
-vertical: 500 mm
Conical cavity in the spindle: ISO 50
Max. spindle torque: 2500 N.m
Spindle speed
Number of degrees: 18
Range: 35.5.-1800 min-1
Working feeds
- continuous regulation range: 1 - 2000 mm.min-1
Rapid traverse: 5000 mm.min-1
Electric feed actuator - nominal torque permanently: 28 N.m
Max. workpiece weight: 800 kg
Spindle drive motor power: 15 kW
Weight: 6,600 kg
Control system: Hedidenhain TNC 407
 
  4
IDMA33827
MakeMaho
ModelMH800E
YOM1989
ConditionGood Condition
PhotoSee Photo
Machine number: 82207
Travels: X - 800 mm / Y - 450 mm / Z - 500 mm
Equipment :
4. axis / NC dividing head
Coolant device
Swing-out device for vertical head
Chip protection cabin
Machine lighting
User guide / Documentation
 
  5
IDMA33172
MakeMaho
ModelMH-C2000
YOM
ConditionGood Condition
PhotoSee Photo
Milling machine - clamping surface (machine base table): 1000 x 650 mm
- Number of T-slots: 7
- T-slot width / distance: 18 H7 / 90 mm
- Total load capacity: 4000 kg
- Table adjustment lengthwise (X-coordinate): 1250 mm
- Headstock Ver. Vert. (Y coordinate): 1000 mm
- Headstock Ver. Transverse (Z-coordinate): 650 mm
- Feed range: 1 ?? 1000 mm / min
- rapid traverse: 3.5 m / min
- work spindle ?? Mounting taper DIN 2079: ISO 40
- Quill stroke, horizontal and vertical: 125 mm
- Spindle speeds, 18 steps: 32 ?? 1600 rpm
- Main motor power: 7.5 kW
- Feed drive power per coordinate: 1.3 kW
- Weight: 7700 kg
Swivel round table
- Clamping area: 1000 x 650 mm
- Number of T-slots: 7
- T-slot width / distance: 18 H7 / 90 mm
- Base area: 600 x 600 mm
- Height: 420 mm
- Rotatable about the vertical Y-axis: 360 °
- Pivoting about the horizontal X-axis: 45 °
- Can be used on basic machine table: 90 °
- Weight: 900 kg
- Load capacity: 2000 kg
Rigid worktable:
- Clamping area: 1800 x 850 mm
- Base area: 1000 x 650 mm
- Height: 200 mm
- Number of T-slots 18 / H7: 9
- Distance of the T-slots: 90 mm
- Load capacity: 3500 kg
- Net weight: 650 kg
 
  6
IDMA32402
MakeDeckel Maho ,Germany
ModelFP4CCT
YOM1990
ConditionVery good condition
PhotoSee Photo
Feed accelerated: 15 m/min,
Tool magazine: 26 item,
X axis travel: 600 mm,
Offset Y axis: 500 mm,
Z axis: 500 mm,
Max. ram spindle: 6300 rev/min,
Machine weight: 6500 kg,
DTR: Yes,
Cooling system: yes,
Leasing: yes,
Full programming instruction: yes
Linear scales on all axes: yes
 
  7
IDMA30325
MakeMaho
ModelMH700C
YOM1984
ConditionGood Condition
PhotoSee Photo
Max longitudinal travel X-axe: 700 mm
Max cross-travel Y-axe: 500 mm
Max travel Z-axe: 400 mm
Type of milling head: ISO 40
Spindlespeeds: 20 - 3150 rpm
Control x
Power needed: 23.4 kW
Length L -- R: 3250 mm
Depth Fw -- Bw: 3600 mm
Height: 2200 mm
Weight 3100 kg
top