VKengg.co.in

Category : Milling Machines

Sub-Category : Plano Miller CNC

Total Machines Found : 48

Select	| Machine Details
1	ID MA38389 Make Waldrich Siegen Model YOM 1986 Condition Good Condition Photo See Photo PASSING WIDTH: 2700mm PASSING HEIGHT : 2500mm TABLE : 2600 x 6000mm SPINDLE ROTATION:200rpm MAX WORKPIECE WEIGHT: 50TONS ATC : 42 AAC: 3 ANGLE HEAD[2 FOR 90*,1 FOR VERTICLE] SYSTEM: SIMENS SINUMERIK SYSTEM 8
2	ID MA38386 Make Okamura Model NDP200 x 500-P YOM 1991 Condition Good Condition Photo See Photo Gate width: 2050 Table length: 5000 x width 1500 Right spindle head: 7.5kw (10 horsepower ) Fanuc red motor Quill 300 mm Left spindle head: 7.5kw (10hp ) FANUC red motor, angle 30 ° left and right Side spindle: Yes Right x 1 Fanuc red motor Right spindle: Angle head 90 ° × 1
3	ID MA38326 Make Waldrich Siegen Model PF-F-150(1)-530/400 YOM 2004 Overhault Condition Good Condition Photo See Photo Portal Plano milling 6 axis - X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 350.000 Kg
4	ID MI10341 Make Caser,Italy Model YOM Condition Good Condition Photo See Photo Double column CNC mill With Milling Head Table Size 3000mm x 2500mm. Between columns 3250 mm. Vertical Height 1250mm. Cnc Fidia controller
5	ID MA37717 Make Waldrich Coburg Model YOM 2009 Condition Good Condition Photo See Photo Control system Siemens . Sinumerik 840 C Dimensions of table working surface . 6000x3000mm Travel X-axis . 6700mm Clearance between columns . 3300mm Distance between table and cross-rail . 2500mm Machine weight . 150800kg Spindle taper . ISO 60. Travel Y-axis . 5900mm Travel Z-axis . 2000mm Machine dimensions l x w x h . 17100x9330x6760mm Main motor power . 75kW Max. load of table . 60000kg Ram travel (V) . 1000mm Diameter of working spindle . 170mm Ram size . 600x600mm Spindle speed . 5-2000/min.
6	ID MA37387 Make TITAN Model FLP3100x10000 YOM Condition Good Condition Photo See Photo Retrofitted CNC Plano Miller TABLE DIMENSIONS: 3100X10700 MM TABLE TRAVEL: 11000 MM MAIN SPINDLE TAPER: ISO 60 MAX. HEIGHT OF WORKPIECE: 3600 MM MAX. WEIGHT OF WORKPIECE: 100 TO WITH HYDRAULIC SUSTAIN OF THE TABLE VERTICAL TRAVEL OF RAM: 1000 MM DISTANCE BETWEEN COLUMNS: 3500 MM MAIN SPINDLE SPEED: 10-500 RPM MAIN MOTOR POWER: 75 KW MACHINE WEIGHT: AB. 240 TO The FLP3100x10000 CNC machine offered for sale is a modernized machine from a mechanical, hydraulic and electrical point of view starting from a FLP 3100x10000 LINE licensed machine. On this machine, the milling head is a special ERI LINE license head that has the possibility of holding a tool in the vertical direction and a tool in the horizontal direction; the horizontal tool can rotate from 90 degrees to 90 degrees so that an additional milling head is no longer needed for milling the sides of the parts. 2. After modernization, the machine will be equipped with AC servomotors and Siemens CNC. 2.1 Pieces of 12m length can be processed by translating the piece along the table. 2.2 The machine will be completely overhauled a. mechanic - revised guideways; - revised and possibly replaced bearings where necessary - revised ball screws - reviewed the 2 gearboxes for table drive - the machine will be equipped with new guide covers on the X axis; - the Y axis covers will be revised - the ERI milling head will be revised and the indexing system at 90 degrees will made with an electric drive system b. hydraulic - the hydraulic installation will be completely new - the sustentation installation for the table will be reviewed and rebuilt based on the new project - the lubrication system will be revised (new lubrication pump and dispensers replaced if necessary) c. electric - new electrical cabinet and new operator's desk - new Schrack/Siemens low voltage supply - new CNC, AC servomotors , frequency converters - SIEMENS - the electrical installation on the machine will be new, redone based on the new project - device for remote control - electronic monitoring for transverse horizontality 3. Technical documentation; 3.1 New electrical project: - electrical diagrams -PLC program - CNC parameters 3.2 Hydraulic project and lubrication system: hydraulic installation diagram, lubrication system diagram 4. The machine will be completely repainted.
7	ID MA36905 Make Waldrich Coburg Model YOM 2007 completely retrofitted Condition Good Condition Photo See Photo CNC Plano Millinghead with Two CNC Millingheads ( Horizontal & Vertical ) Control : Fagor 8055 Table size: 8000 x 2000 mm Distance between Columns: 2500 mm Max. Workpiece height: 1800 mm X - 8000 mm Y - 3200 mm
8	ID MA36655 Make STANKO Model UFO649 YOM Condition Good Condition Photo See Photo Passage beween uprights 1450 mm Longitudinal travel X-axe 10000 mm (2tables together) Cross travel Y-axe 2400 mm Travel (height) Z-axe Z1:1450 mm + Z2:630mm Dimensions Clamping space - table 1250 x 9200 mm Max height of workpiece 1600 mm Power on spindle 42 kW/moment 540kpn Type of milling head Vertical + extra's Admission in millingheadspindle (ISO) ISO 60 Max quill travel Z' Z2:630 mm Admission in boring head (ISO) ISO 60 Max speedrange 80 - 630 rpm Length 22850 mm Depth 5200 mm Height 6000 mm Weight 90000 kg Portal Bed Milling machine with movable table. Z1 height movement (bridge): 1450 mm Z2 Height movement (Ram-milling head): 630 mm X movement: 2 Coupled tables: 10000 mm Individual Table: 4800 mm Max weight on Table: 25Ton Including 1 Winkel milling head 1 x 90° - 28 kW - ISO 50 Including 1 Universal Milling Head: 2 x 180° - ISO 50 - 13 kW Including 1 Winkel Milling Head extended 2 x 360° - ISO 50 - 13 kW Spindle extension: 650 mm
9	ID MA36628 Make Correa Model YOM 2003/2022 Condition Good Condition Photo See Photo traverse paths: X-axis: [mm] 14,000 Y axis: [mm] 3,100 Z axis: [mm] 1,200 (220 - 1,420) Feed: (X/Y/Z) [m/min.] 30 Rapid traverse: (X/Y/Z) [m/min.] 30 Distance between stands (mm) 4.417 swivel head 5 axes (C5C), electrospindle Speed ​​range: [rpm] 18,000 Drive power: [kW] 25 tool holder: HSK 63 tool changer hydraulic & automatic Tool places: 24 Table size: [mm] 14,000x2,500 Number of T-slots: 10, 22 mm Max. table load: [kg] 15,000 kg/m² Machine weight: [kg] 135,000 Space requirement (LxWxH): [m] 15,000x8,418x6,033 Features Internal cooling (IKZ): [bar] coolant system external Electronic hand wheel Monitoring / Guarding The X-travel of 14 meters makes it an ideal solution for machining large parts in toolmaking and toolmaking. The high speed milling head is an excellent alternative for aerospace applications. Excellent Geometry & Accuracy! Warranty: 6 months on mechanical parts.
10	ID MA36559 Make Noble & Lund Model YOM Condition Good Condition Photo See Photo X-axis 10000 mm (via servo-driven ballscrew) Y-axis 5000 mm (via servo-driven ballscrew) Z-axis 1000 mm (via servo-driven ballscrew) W-axis 360° rotating table (via servo-driven gear unit), can be locked at 90° Max width admitted between columns 4300 mm Max height under cross rail 2400MM (with risers) Table working length 10000 mm (combined) Fixed table 3048×3048 mm Integrated rotating table 3048×3048 mm (W-axis) Weight carried across both tables 100 tonnes Ram type swivelling Z-axis with universal ISO50 milling head (+ accessories) 3-shear covered bed 3150 mm wide (in 3 sections) Footprint approx. 19.6×6.8 m (no pit required) Overall height 6.60 m (with risers) Total weight of machine 155 tonnes Control: CPU, MARK CENTURY 2000 Rotary table can be indexed precisely under the control of the CNC (clockwise + anticlockwise) and it can be rotated continually for radial milling. A late 1980's machine built as a true CNC (not manual type). Upgrades and choice of a new/serviced replacement CNC system available.
11	ID MA36554 Make Waldrich Coburg Model 20-10FP280 YOM 1973/1999 Condition Good Condition Photo See Photo  |  See Video Planer-Type Milling M/C - Double Column Text Dimension Unit + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and misc.tools x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m
12	ID MA36550 Make Waldrich Coburg Model 17-10FP180 YOM 1978 Condition Good Condition Photo See Photo generally overhauled 2013, dismantled on stock. Controls: CNC Haidenhain TNC 530i, new 2013 x-axis traverse 6800 mm y-axis traverse 3265 mm z-axis traverse 1010 mm w-axis traverse 1530 mm PORTAL / BRIDGE distance between columns 2450 mm-2600 mm TABLE clamping surface (left-right) 6500 mm clamping surface (front-back) 1800 mm WORKING SPINDLE / HEAD spindle type vertical spindle revolutions (min) 6 /min spindle revolutions (max) 750 /min taper fixture ISO SK 60 drive power (max) 63 kW AXIS DRIVES traverse velocity x (min) 10 mm/min traverse velocity x (max) 8000 mm/min traverse velocity y (min) 10 mm/min traverse velocity y (max) 3000 mm/min traverse velocity z (min) 5 mm/min traverse velocity z (max) 2000 mm/min feed velocity w (min) 10 mm/min feed velocity w (max) 1500 mm/min rapid traverse x 15000 mm/min rapid traverse y 4500 mm/min rapid traverse z 3000 mm/min rapid traverse w 1500 mm/min ELECTRICAL SPECIFICATIONS mains voltage 400 V mains frequency 50 Hz DIMENSIONS / WEIGHTS space requirements length 16500 mm space requirements width 6600 mm height above floor level 5800 mm Planer type milling machine with hydrostatic table guidance, worm gear drive and gear rack. Passage between columns with covers = 2450 mm Passage between columns without cov.= 2600 mm Frontal Bearing diameter = 170 mm Max. distance Table - Spindle = 2010 mm Double table machine with table 1 = 3000 mm + table 2= 2500mm length Spindle travel = 1010 mm Table height above floor = 500 mm Max. workpiece weight Table 1 = 37000 Kg Max. workpiece weight Table 2 = 31000 Kg Max workpieceweight double table = 68000 Kg Regulating ranges/limits: Table 1 = 3363 mm Table 2 = 2865 mm Coupled 1+2 = 6800 mm The machine has been generally overhauled in 2012-2013 with new electric, new measuring system, new motors, new Haidenhain controls, partially overhauled hydraulics and mechanical, excellent condition, ready for most demanding work. It is sold from stock, dismantled, as is.
13	ID MA35970 Make Waldrich Siegen Model PMC 4000 AT-F17 YOM 1994 Condition Good Condition Photo See Photo Technical specification Stroke X-axis : 14,000 mm Y-axis : 5,500 mm Z-axis : 1,000 mm W-axis : 3,250 mm Between cloumns : 4,000 mm Table size : 3,000 X 13,000(6,000+7,000) mm Table load : 50 Ton Spindle power : 75Kw ATC : X 250 pot AAC : X 12 attachment Main Production -. 4 Storke BLOCK Final cutting -. 2 Storke BED PLATE & FRAME BOX Final cutting with controller siemens 840C
14	ID MA35893 Make Correa Model FP40/40 YOM 2004 Condition Good Condition Photo See Photo Type Bridge Type Control unit: HEIDENHAIN TNC i530 Table dimensions: 4.000 x 2.000 mm Number of T slots: 11 T slots dimensions: 22 mm X axis traverse:4.000 mm Y axis traverse: 3.000 mm Z axis traverse: 1.000 mm Distance between columns: 2.530 mm Head Type : NEW! Auto-indexing / UDG (2,5o) Tool clamping system: Hydraulic Taper nose: ISO 50 Speed range: 20 - 3.000 r.p.m. (5.000 salida directa/direct spindle) Spindle power: 30 kW Feedrate: 7.000 mm/min X-Y,Z Rapid feedrate: X=15.000 / Y-Z=12.000 mm/min Max. Weight on table:10.000 Kg Machine weight: 24.900 Kg Machine dimensions: 10.748 x 4.610 x 4.400 mm
15	ID MA35886 Make SNK Model RB3N YOM Condition Good Condition Photo See Photo 6000 x 1500 mm, Distance between column: 2400, RPM: 2000 Fanuc series O-M
16	ID MA35872 Make Nicolas Correa Model FP30-40 S YOM 2001 Condition Good Condition Photo See Photo CNC controller: HEIDENHAIN TNC 426 Axes X axis travel mm: 4.000 Y axis travel mm: 2.500 Z axis travel mm: 800 Feed rates m/min: 0,2 7,5 Rapid traverse m/min: 15/12 Worktable Table dimensions mm: 4.500x1.250 Max. workpiece weight kg: 10.000 Distance between the columns mm: 2.040 Number of T slots No./mm: 8/22 Distance between T slots mm: 150 Spindle (2,5º automatic index) Spindle speed rpm: 40 5.000 Spindle drive power kW: 22 Constant torque (676 Nm) rpm: 40 311 Constant power (22 kW) rpm: 311 5.000 Cooling Cooling through the Spindle Center: 20 bar Tank capacity: 300 Tool system Tool holder: ISO 50 Tool magazine slots: 60 Max. Tool Diameter With free neighboring places mm: 200 With occupied neighboring places mm: 115 Max. Tool Length mm: 400 Max tool weight kg: 15 Equipment Electronic Handwheel (HEIDENHAIN HR 410) Chip conveyor Infrared probe (RENISHAW MP16) High pressure pump
17	ID MA35607 Make Okuma,Japan Model MCR-A5C YOM 2010 Condition Good Condition Photo See Photo Between column : 2550 Table : 2000 * 6500 X YZ Travel : 6700 * 3000 * 650 ATC: 50 station 30~4000 rpm Tool holder : BT50 + MAS2
18	ID MA35394 Make IMUB Bacau,Romania Model FLP 2000x8000 YOM Retrofitted 2010 Condition Good Condition Photo See Photo  |  See Video table size Width : 2200 mm Length : 2 x 4000 mm Travel of tables : 9320 mm Length between columns : 2520 mm Maximum length from table to spindle front face : 2150 mm Ram size : 460 x 460 mm Crossrail travel : 1600 mm Main spindle speed : 10 – 800 rpm Table feed range : 10 – 3000 mm/min Main motor power : 60 Kw Overal dimensions : - Length : 21240 mm - Width : 6800 mm - Height : 6650 mm Weight : 120.000 Kg ( 120 tons )
19	ID MA34403 Make SNK Model RB6VM YOM 2000 Condition Good Condition Photo See Photo Fanuc 18i-MB Between Column 3500 mm Table: 6000 x3000 mm Main Spindle: BT50, 6000 rpm, ATC-60 Angular Attachment L=300
20	ID MA34105 Make Correa Model FPM60 YOM 1995/Retrofitted: 2020 Condition Good Condition Photo See Photo Dimensions Table dimensions: 6000 x 2500 mm Number of T slots: 10 T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mm Y axis traverse: 3800 mm Distance between columns: 3370 mm Z axis traverse: 1000 mm Milling head Head type: Universal Auto-indexing UDG-40 (3º) Tool clamping system: Hydraulic Taper nose: ISO 50 Speed range: 20 - 2000 r.p.m. Spindle power: 30 kW Feedrates Feedrate: 2 - 5000 mm/min Rapid feedrate (X / Y,Z): 7200 mm/min Weight and dimensions Max Weight on table: 15000 kg/m2 Machine weight: 75000 kg Machine dimensions: 15300 x 6550 x 6180 mm
21	ID MA34104 Make Correa Model Rapid50 YOM 2002 Condition Good Condition Photo See Photo Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 11 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3100 mm Distance between columns: 2800 mm Z axis traverse: 1200 mm Milling head Head type: CCE 2 Axis continuous Tool clamping system: Hydraulic Taper nose: HSK 63 Speed range: 18000 r.p.m. Spindle power: 20 kW Feedrates Rapid federate (X, Y,Z): 20000 / 30000 mm/min Weight and dimensions Max Weight on table: 15000 kg Machine weight: 65000 kg Machine dimensions: 15100 x 6200 x 6250 mm
22	ID MA34103 Make Correa Model FP40/50 YOM 1998/Retrofitted: 2020 Condition Good Condition Photo See Photo Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3250 mm Z axis traverse: 1000 mm Distance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous head Tool clamping system: Hydraulic Taper nose: BT 50 Speed range: 40 - 4000 rpm Spindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/min X-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kg Machine weight: 40500 kg Machine dimensions: 12700 x 5070 x 4900 mm
23	ID MA34102 Make Correa Model FP40/40 YOM 1997 Condition Good Condition Photo See Photo Dimensions Table dimensions: 4000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3500 mm Y axis traverse: 2500 mm Distance between columns: 2040 mm Z axis traverse: 1000 mm Milling head Universal manual U40 (Optional: Standard vertical spindle) Tool clamping system: Hydraulic Taper nose: ISO 50 Speed range: 20 - 2000 r.p.m. Spindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/min Rapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Max Weight on table: 10000 kg Machine weight: 24900 kg Machine dimensions: 10748 x 4932 x 4400 mm
24	ID MA34101 Make Correa Model FP40/40 YOM 2004 Condition Good Condition Photo See Photo Table dimensions : 4.000 x 2.000 mm Number of T slots: 11 T slots dimensions : 22mm X/Y/Z (mm): 4000 / 3000 / 1000 Between columns (mm): 2530 Heidenhain TNC-530 Manual milling head (UM40) Electronic handwheel (HR-420) Tool clamping system: Hydraulic Taper nose: ISO 50 Speed range : 20-3.000 r.p.m. (5.000 salida directa/direct spindle) Spindle power : 30kW Feedrate : 7.000 mm/min X-Y,Z Rapid feedrate : X=15.000/Y-Z=12.000mm/min Max.Weight on table : 10.000 Kg Machine Weight : 24.900 Kg Machine dimensions : 10.748 x 4.610 x 4.400 mm
25	ID MA34100 Make Correa Model FP30/40 YOM 1998 Condition Photo See Photo Dimensions Table dimensions: 4000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3500 mm Y axis traverse: 2000 mm Distance between columns: 1740 mm Z axis traverse: 800 mm Milling head Universal manual U40 (Optional: Standard vertical spindle) Tool clamping system: Hydraulic Taper nose: ISO50 Speed range: 20 - 3.000 rpm (5.000 rpm direct exit option) Spindle power: 30 kW / 725 Nm Feedrates Feedrate: 7000 mm/min Rapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 Kg Machine weight: 30500 Kg Machine dimensions: 10748 x 4762 x 4400 mm
26	ID MA34099 Make Correa Model FP30/30 YOM 1996 Condition Good Condition Photo See Photo Table dimensions: 3000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm X axis traverse: 2500 mm Y axis traverse: 1800 mm Distance between columns: 1680 mm Z axis traverse: 800 mm Head type: Standard vertical spindle Tool clamping system: Hydraulic Taper nose: ISO 50 Speed range: 20 - 2000 r.p.m. Spindle power: 22 kW Feedrate: 2 - 5000 mm/min Rapid feedrate (X / Y,Z): 15000 / 12000 mm/min Max Weight on table: 10000 kg Machine weight: 21500 kg Machine dimensions: 7300 x 2690 x 3400 mm
27	ID MI7493 Make Waldrich Coburg Model YOM Condition Good Condition Photo See Photo Des : 8000/2000/1500mm
28	ID MA34098 Make Linx Model Jobs (Italy) YOM 2009 Condition Good Condition Photo See Photo CNC-contouring-control by SIEMENS SINUMERIK 840 D Hardware: NCU 573 Pentium III in 5 axis/1 spindle – 3 MB user database, 192 KB PLC – system software memory card – NCU box for central processing unit CN – flat screen OP015 process INTEL CELERON 1.56 Hz, 512 MB ram, XP-floppy-disc 3.5” – 32 input/output 8 output 2 A – IM-R 361 – 8 analog input – 4 analog output – dynamic servo control standard machining cycles – 3 data base increments PLC – look ahead – programmable speed-up 5D-package, interpolation incl. 5-axis-conversation - return with oriented tooling, RTCP, tooling adjustment – 2 additional axis/spindle – multi axial interpolation for more than 4 axis · portable control panel with hand wheel · high-speed package · · CNC universal milling head TMX – index 1° (C-axis +-180° / A-axis +0/-90°) · motor spindle 41/31 KW – 20 up to 8,000 rpm. HSK-A 100 · · 180-fold tool changer in DEMMLER – TOOLING - ARENA : 6-axis roboter KUKA – hydr. double gripper · 180 tooling places HSK-A 100 incl. prepare station for 2 x 8 tooling places – tooling break control with laser light beam – tooling conus cleaning – tooling identification BALLUFF max. tooling diameter = 140/300 mm – max. boring bar = 450 mm – max. tooling length = 350 mm max. tooling weight = 15 kg – lock 8 + 8 places · minimum quantity lubrication outside/inside spindle – air supply outside/inside tooling · · calliper RENISHAW RMP 60 + JOBS measuring cycles (radio transmission) component measuring/zero point · complete protective coating incl. roof – 2 exhauster AR – FILTRAZONI – 1 rolling shutter gate – 1 operator door TRAVEL: max. working length (travel X-axis) 4,500 mm max. working width (travel Y-axis) 3,650 mm max. working height (travel Z-axis) 1,100 mm speeds up to 50 m/min. feed force X/Y/Z 9,000/9,000/6,000 N increase X/Y/Z up to 3.9/5.5/6.2 m/sec2 TMX-HEAD AXIS C –axis +-180 ° pitch 1 ° A – axis +0/-90 ° pitch 1 ° speed up to 30 °/sec. max. torque (clamped axis A/C) 33,000/31,000 Nm SPINDLE – UNIT spindle speed 20 up to 8.000 rpm. spindle fixture (DIN 69893) HSK-A 100 irreversible clamping tooling (10%) 45,000 N power 41 KW constant torque 313 Nm total power required 180 kVA approx. weight 44.9 tons approx. required space (L x W x H) mm
29	ID MA34096 Make Juaristi Model FP-3 YOM 1983/ RETROFITTED 2005 Condition Good working condition Photo See Photo FIDIA CONTROL: CNC C2 PCD 379 TABLE DIMENSIONS: 6930 x 3000 MM. Y AXIS TRAVERSE: 5780 MM. Z AXIS TRAVERSE : 3900 MM. W AXIS TRAVERSE : 900 MM. DISTANCE BETWEEN COLUMNS: 4000 MM. AUXILIAR HEAD 90º : 1270 MM. ENGINE POWER: 55,80 CV. X AXIS ENGINE: SIEMENS. X AXIS MOTOR DRIVE: SIMODRIVE 611. Y AXIS ENGINE: SIEMENS. Y AXIS DRIVE: SIMODRIVE 611. Z AXIS MOTOR: SIEMENS. Z AXIS DRIVE: SIMODRIVE 611. TAPER NO. ISO-50. SPEED RANGE: 4000 RPM. RAPID TRAVERSE X-Y-Z: 10000 MM/MIN. WORK TRAVERSE X-Y-Z: 4000 MM/MIN. COMPENSATION PRESSURE: 140KG/CM2 MAX. WEIGHT ON TABLE: 25000 KGS.
30	ID MA34094 Make Waldrich Coburg Model 17S-10FP YOM 1989 Condition Good Condition Photo See Photo distance between: columns mm 3.000 top of table to spindle nose mm 2.500 2 pallets with automatic pallet serving system: clamping area pallet I mm 2.500 x 5.000 clamping area pallet II mm 2.500 x 5.000 max. work piece widths mm 2.950 max. work piece weight per pallet t 60 milling head (ram design with integrated C – axis +- 360^degrees) spindle motor (100% ED) kW 75 speed range min –1 5 – 2.500 base speed min –1 76 max. torque Nm 8.400 ram cross section mm 600 x 600 tool adapter ISO 60/50 swing speed of C - axis degree/min 2.250 max. torque of C - axis Nm 5.000 pallet traverses (x - axis) max. traverse of pallet carrier mm 6.500 feeds/rapids mm/min 1 – 15.00 traverse milling head (y - axis) max. traverse mm 5.440 feeds/rapids mm/min 1 – 15.000 ram (z - axis) max. traverse mm 1.000 feeds/rapids mm/min 1 – 10.000 ram (z - axis) max. traverse mm 1.000 feeds/rapids mm/min 1 – 10.000 cross rail (w - axis) max. traverse mm 2.500 feeds/rapids mm/min 1 – 2.000 general machine size machine lengths, approx. mm 14.900 machine widths, approx mm 11.800 machine heights (when top of table 500 above floor) appr. mm 6.400 machine weight, approx t 152 electrical details V/Hz 480/50 max. power required kVA 150 accessories of the machine 1 piece of 2 axis CNC controlled HSU • 1 spindle extension 650 mm • 1 pieces HSU • serving system for HSU‘s • tool changer in chain system with 39 places
31	ID MA32644 Make Zimmermann Model FZ37 YOM 2001 Condition Good Condition Photo See Photo WORKING RANGE -CUBIC- number of processing axes (excl parallel axes):5 . among of them simultaneous CNC axes: 5 X-axis travel :( 157.6 " ) 4000 mm Y-axis travel :( 98.5 " ) 2500 mm Z-axis travel :( 49.25 " ) 1250 mm rotating range A-axis fro:110 ° rotating range A-axis up to :-110 ° rotating range C-axis from:300 ° rotating range C-axis up to:-300 ° distance spindle nose - table surface (max.) (79.982 " ) 2030 mm PORTAL / BRIDGE distance between columns: (143.18 " ) 3634 mm TABLE table surface (left-right):( 98.5 " ) 2500 mm table surface (front-back):( 177.3 " ) 4500 mm MILLING SPINDLE / HEAD spindle type:orthogonal head spindle revolutions (max):15000 /min tool fixture: HSK A63 drive power: (37.548 hp) 28 kW ELECTRICAL SPECIFICATIONS total power consumption: ( 53.64 hp) 40 kW mains voltage:400 V mains frequency:50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-:( 236.4 " ) 6000 mm space requirements -front/back-:(307.32 " ) 7800 mm total height:(193.06 " ) 4900 mm total weight approx.:( 81585 lb) 37000 kg
32	ID MA32565 Make Tos Kurim Model FRFQ200KR-A6 YOM 1999 Condition Good Condition Photo See Photo Parameters: 2000 x 6000 mm
33	ID MA32485 Make Droop & Rein,German Model LFAS 2000 kc N YOM 1983 Condition Good Condition Photo See Photo  |  See Video x-travel: 3300 mm y-travel: 2000 mm z-travel: 1300 mm Control TNC: 426/430 Heidenhain table-size: 5500 x 2000 mm tool taper SK 50 spindle turning speed range: 63- 3150 U/min feeds - automatic programming: 5- 3000 mm/min rapid traverse: 6/4 m/min stroke of milling spindle: 350 mm total power requirement: 45 kW weight of the machine: ca. 70 t dimensions of the machine: ca. 9,5 x 5,5 x 5,8 m Control: CNC
34	ID MA32481 Make Norma Model YOM Condition Good Condition Photo See Photo able dimension 10000 x 2000 mm X long travel 7000 mm Z travel vertical: 500 mm Y cross Travel: 1500 mm Distance between column 2250 mm Min & max distance between table to cross rail: 1400 mm Head spindle power Kw 19/24 Spindle taper ISO 50 Spindle head Index able at every 2,5 degree Tool changer 32 places Total weight of the machine approx 25 000 kg Control: Num750 (as retrofit)
35	ID MA32480 Make STANKO Model 6625Y YOM Condition Excellent condition,under power Photo See Photo  |  See Video Table 2500mm x8500mm Machine weight: 135000 kg Distance between stands: 2990 mm Sliding bar run (Z): 1000 mm Spindle stock run (Y): 4000 mm Table run: 8700 mm Cross bar run (W): 1710 mm Spindle rotation frequency: 15-2000 Sp indle stock motor capacity: 40-55kW There is a side milling head also, but it’s not put at the machine. Control: CNC They’ve worked only with the horizontal head, the vertical you can see at the photos attached At picture n. 14063/two photos – one head/you can see the vertical head, which can be put on the right column. You can see the appliances for the horizontal head at picturesn.14052,14092,14062. These appliances gives the opportunity to work under 90degrees and mill at the side of the machine which is without head.
36	ID MA30452 Make Ingersoll Model YOM Condition Good Condition Photo See Photo Table Working Area (Split 2-Piece) 69" X 323", Table Travel 300" Approx Distance Spindle to Table 100" Max. Table Feeds (Infinate) 0-225" Max. Spindle Speeds (Infinate) 0-850 RPM Spindle Motor 75 HP Spindle Carrier Vertical Travel 36" Spindle Taper 50 NST Distance Between Housings 78 1/2" Ram Size 19.5" X 19.5" Actual Foot Print (W x L x H) 17' x 63' x 21' 5" Equipped With: Fidia C-20 CNC Control System w/Built-in Manual Pulse Generator Separate Remote Manual Pulse Generator Pendant Control with 17" Flat Screen (Full Color Graphics) Eithernet RS-232 Port Right Angle Milling Head (Separate) Nutator Head (Separate) Steel Retractable Way Covers 3" Diameter Ball Screws (Including W-Axis) Worm Gear X-Axis Drive Hard Bed & Column Ways Soft Rail Ways with Fresh Flaking Hydrostatic Ways (All Axis's) Automatic Lubrication All Available Manuals, Schematics & Catalogs.
37	ID MA29529 Make Mitsubishi Model MVR45 YOM 2010 Condition Good Condition Photo See Photo 5* face Width of passage: 4250 mm, Table size: 3500 x 8000 mm, Strokes X: 8200 mm, Y: 4500 mm, Z: 800 mm, W: 1100 mm, Distance from spindle to table: 2100 mm (Hi- column), ATC: 100 stations, AAC- right angle head VHRH-30-35-35P-AC, Control: Fanuc 31iM
38	ID MA28669 Make ShinNippon Koki,Japan Model HF5M YOM 1992 Condition Good Condition Photo See Photo Work table size : 2500 x 6000 (2 APC) mm, Column size : 3200 mm, X axis travel : 9000 mm, Y axis travel : 4550 mm, Z axis travel : 750 mm, W axis travel : 1700 mm, Spindle Speed : 2000 rpm, Tool storage capacity : 120 pcs. Control system FANUC-15M.
39	ID MA28593 Make Okuma,Japan Model YOM 1989 Condition Good Condition Photo See Photo Table size : 1500 x 4000 mm, Between Columns : 2050 mm, Controller : OSP-5020 with DNC, ATC : 24 stations.
40	ID MA28514 Make SNK Model RB4VM YOM 2000 Condition Good condition,under power Photo See Photo Between column : 2400 mm, T : 2000 x 6000 mm, ATC : 100 2APC, Control : Fanuc 18iM. AAC 90 DEGREE Angle head.
41	ID MA28464 Make Ingersoll Model MCP-T1/180x350 YOM 1991/2006 Condition Good Condition Photo See Photo  |  See Video X-Travel : 4000 mm, Y-travel : 3000 mm, Z-travel : 1200 mm, C-axis 360°, B-axis 360°, Table load : 35 t, Spindle taper ISO : 50, Spindle turning speed range : 10 - 4000 U/min, Spindle motor : 37/50 kW, Feeds longditudinal/cross/vertical : 1 - 10000 mm/min, Rapid travel x/y/z : 15000 mm/min, Spindle diameter in front bearing : 140 mm, Distance table - lower edge spindle : 1200 mm, Surface area : 3500 x 1800 mm, Distance between columns : 2300 mm, Max. torque on the spindle : 2650 Nm, Control FIDIA M20, Max. torque on the spindle : 2650 Nm, Total power requirement : 100 kW, Dimensions of the machine ca. 10,9 x 7,2 x 5,8 m Weight of the machine ca. : 70 t. Equipment :- Machine with CNC control for 5-axis simultanous operation FIDIA M20. Head changer for NUTATOR head 2-axis NC, spindle extension. Spindle box with 3 gear steps. Tool changer for 40 tools. Coolant through spindle 20 bar. Hydrostatic table guideway with worm drive. Double chip convejor with coolant device. Oil and liquid cooler.
42	ID MA28456 Make Zayer Model KP5000 YOM 1996 Condition Good Condition Photo See Photo Table Size:5000mm x 1200mm X axis travel:5000mm Y axis travel:2560mm Z axis travel:1100mm Between columns:1800mm Height Under cross slide:1000mm - 1700mm Max weight on table:10000 kilos Tool Taper: ISO 50 Speeds:6000 r.p.m. ( 2 ranges / 2 Gamas) Hydraulic tool locking:SI / YES / OUI / JA Feeds:15000mm/Min Auto head orientation:SI / YES / OUI / JA Number of heads:3: (Auto Index CNC, Direct spindle head & extender head) Automatic head changer:SI / YES / OUI / JA CNC Head: Auto Indexing Head 4th -5th Axis A=360 x 1º B=360 x 1º Electronic Handwheel: SI / YES / OUI / JA Positioning accuracy:0.010mm Repetitive accuracy:0.005mm Control:Fidia M20 Equipped with: Head cooling system, gearbox cooling system, coolant tanks and filters, magnetic separation Equipment: refirgerador cabezal y caja de cambios, deposito de taladrina, filtros y separación magnética Motor:37KW/50HP Weight:34000 kilos
43	ID MA28126 Make DYE Model FBF-C-N/C YOM 1986 Condition Good Condition Photo See Photo Working Range Milling X axis traverse: 4000 mm, y axis traverse: 1500 mm, Z axis traverse: 750 mm, W axis traverse: 150 mm, Table Table surface (left-right): 4000 mm, Table surface (front-back): 1250 mm, Workpiece load (max): 12000 kg, Working Spindle/Head Spindle revolutions (min): 55 /min, Spindle revolutions (max): 2000 /min, Drive power (max): 22 kw, Torque (max): 3900 Nm, Axis Drives Traverse velocity X (max): 5000 mm/min, Traverse velocity Y (max): 5000 mm/min, Traverse velocity Z (max): 5000 mm/min, Electrical Specification mains voltage: 380 v, Mains frequency: 50 Hz, Control: CNC Fagor 8025 MG.
44	ID MA28125 Make Droop & Rein,German Model LFAS130ke YOM Condition Good Condition Photo See Photo Working Range Milling X axis traverse: 3935 mm, Y axis traverse: 1487 mm, Z axis traverse: 945 mm, W axis traverse: 250 mm, Table Table surface (left-right): 4000 mm, Table surface (front-back): 1600 mm, Height above floor level: 1050 mm, Working Spindle /Head spindle type: vertical, Spindle revolution (max): 4000/min, Number of gears: 2, Spindle diameter; 130 mm, Tool fixture: ISO SK 50, Spindle power: 37 kw, Torque (max): 236 Nm, Sleeve stroke: 300 mm, Axis Drives Rapid traverse X: 10000 mm/min, Rapid traverse Y: 10000 mm/min, Rapid traverse Z: 6000 mm/min, Rapid traverse W: 3000 mm/min, Dimensions/Weights Space requirements length: 10000 mm, Space requirement width: 5500 mm, Total height: 5500 mm, Total weight approx: 55000 kg, Control: CNC Fidia M20.
45	ID MA28122 Make Waldrich Coburg Model 20-10-GM360 YOM 1983 Condition Good Condition Photo See Photo Total length (foundation) : 24165 mm, Total width : 11750 mm, Height (top of the foundation) : 5750 mm, The width of the clamping plate : 3600 mm, The distance between the posts : 4600 mm The total length of the clamping plate :16000 mm, The distance between the clamping plate and the front end of the spindle : (max 3500) mm (min.100) Travel ranges : Portal : 13500 mm, Bar : 2450 mm, Sled slide milling spindle slide vertically : 1000 mm, Sled milling spindle caliper slides horizontally : 5400 mm, Movement of movements : Portal - manually High Speed ​​- mm / min 10000 Submission - mm / min. 2-10000 Slow-mm / min. 5 Lower slide hob slide: High Speed ​​- mm / min. 6000 Submission - mm / min. 2-6000 Slow-mm / min. 5 Spindle milling slide - slide: High Speed ​​- mm / min. 3000 Submission - mm / min. 2-3000 Slow-mm / min. 5 Cross member: High Speed ​​- mm / min. 2000 Submission - mm / min. 2-2000 Slow-mm / min. 5 magazin tool - 80 units Weight machine approx : 315 ton.
46	ID MA28107 Make Zimmermann Model FZ37 YOM 2001 Condition Good Condition Photo See Photo WORKING RANGE -MILLING :- X-axis traverse : 3500 mm, Y-axis traverse : 2500 mm, Z-axis traverse : 1250 mm, Number of controlled axes : 5, PORTAL / BRIDGE :- Distance between columns : 3640 mm, TABLE :- Table surface (left-right) : 3500 mm, Table surface (front-back) : 2500 mm, Workpiece load (max) : 30000 kg, WORKING SPINDLE / HEAD :- Spindle type orthogonal head, Tilting range : 300°, Mode of operation automatic, Tilting range (2nd axis) : 110°, Mode of operation automatic, Spindle revolutions (max) : 18000 /min, Tool fixture : HSK A63, Drive power (max) : 28 kW, Torque (max.) : 89 Nm, AXIS DRIVES :- Rapid traverse : 25000 mm/min, DIMENSIONS / WEIGHTS :- Space requirements length : 6990 mm, Space requirements width : 8080 mm, Total height : 4741 mm, Total weight approx. : 35000 kg. Controls : CNC controls FIDIA C 20.
47	ID MA28095 Make Waldrich Coburg Model PG160CNC YOM 1986 refurbished with Sinumerik 840D in 2007 Condition Good Condition Photo See Photo Table: 4000 x 1600 mm, Table load: 40 ton, Between columns: 1950 mm, X axis: 4700 mm, Y axis: 2800 mm, Z axis: 1500 mm, W axis: 1000 mm, Feed speed; -X axis slow feed; 200 mm/min,40 mm/min normal feed: 10-3000 mm/min, fast feed; 10000 mm/min, -Y axis slow feed; 200 mm/min,40 mm/min, normal feed: 10-3000 mm/min, fast feed: 10000 mm/min, -Z axis slow feed; 60 mm/min,10 mm/min, normal feed; 10-2000 mm/min, fast feed: 3000 mm/min, -W axis fast feed:2000 mm/min, Spindle: Dia under bearing: 150 mm, Power: 55 kW/57 kW, Torque: 8900 Nm, Rated engine speed: 300 min-1 Control: Siemens 840D
48	ID MA28083 Make Toshiba Japan Model MPE-2140 YOM 2000 Condition Good condition,under power Photo See Photo Table size 1798 mm x 3998 mm, Table travel X-Axis : 4500 mm, Spindle head Y-Axis : 2900 mm, Ram stroke Z-Axis : 1000 mm, Distance between Columns : 2100 mm, Ram cross section : 380 mm x 380 mm, Mininimum table to spindle : 300 mm, Maximum table to spindle : 1300 mm, Right angle head indexing : 5 Degree Spindle speeds : 30-3000 RPM, Table weight capacity : 39943 KG, Spindle Drive Motor : 19 KW0HP, Tosnuc 888M CNC Control, 120-Position Automatic Tool Changer, Right Angle Head with Auto Indexing, Rigid Tapping, Splash & Chip Enclosure, Chip Conveyor.