Multi-position automatic press Number of racks -4 Number of stamping positions -8 Workpiece cutting position with swivel knife -1 Clear distance between racks, mm: from right to left -1560 front to back -5480 Distance between the dies' axes, mm -500 Sliding die plate, dimensions, mm -200х1200х4050 lifting capacity, kg -25000 The maximum distance between the die plate and the press slide in the upper crank position, mm -1050 Press slide stroke, mm -400 Adjustment of the distance between the die plate and the slider at each position, mm -50 Stroke of the upper hydraulic ejector, mm -10 Sliding rack and pinion transport (clamshell): distance between rails, mm in the open position, mm 600-900 in the closed position, mm 300-600 feed stroke, mm -500 Distance from the die plate to the transport plane, mm 500 Roll box: Belt width min ... max, mm -100 ... 300 mm, Inner roll diameter, mm -508; 610 Spreading range, mm -460 ... 520; 560 ... 620 Roll outer diameter, max, mm -1300 Roll weight max, kg -3000 Lifting force of the loading table, N -60000, Loading table lifting stroke, mm -300 Spreader mandrel drive - geared motor Correct unwinding device: Belt width min ... max, mm -100 ... 300 mm, Belt thickness min ... max, mm -2.0 ... 3.0 mm, Material hardness max, -450 N / mm, Straightening roll diameter, mm -60, Number of straightening rolls -7, Traction roll diameter, mm -120 Number of traction rolls -2, Feed rate, m / min -3 ... 15 Strip laying mechanism: Strip width, mm -100 ... 200, Strip thickness, mm -2.0 ... 3.6, Strip length max, mm -3000.0, Stack height of strips max, mm -500, Max strips stack weight, kg -3000.0 |