Category : Turning Machines

Sub-Category : Lathe Sliding Head CNC

Total Machines Found : 38

Select | Machine Details
 
  1
IDMA35755
MakeStar
ModelSV32
YOM2003
ConditionGood Condition
PhotoSee Photo
9-Axis machine,
Control: Fanuc 16I-TB,
Maximum machining diameter: 32 mm,
Maximum spindle speed: 7000 rpm (main and sub-spindle),
Head stock travel: 300 mm (Z),
10 Station rear turret (B E and Y-Axis Travel),
4 Turning and 3 cross driven positions on Platten (A and X-Axis travel),
C Axis on Main and Sub spindle 0.001 degrees.
JBS Flexible Guide Bush.
Swarf Conveyor.
Parts catcher and Conveyor.
Firetrace Suppression.
FMB 5-42 Turbo Barfeed
 
  2
IDMA35638
MakeCitizen Cincon
ModelB12
YOM2000
ConditionGood Condition
PhotoSee Photo
Max turning diameter: 12.7 mm,
Max turning length: 135 mm,
Subspindle,
Iemca Genius 112/32 magazine bar loader (2001)
 
  3
IDMA35585
MakeTornos
ModelDECO13
YOM2001
ConditionGood Condition
PhotoSee Photo
6 Axis machine,
Control: Fanuc,
Bar passage: 13 mm,
Length of part in chuck (max): 160 mm,
Main spindle speed (max): 12000 rpm,
Main spindle power: 3.7 kW,
Counter spindle speed (max): 12000 rpm,
Counter spindle power: 2.2 kW,
Dimensions: 1,100 x 7,270 x 1,950 mm (including bar feeder),
Weight: 3000kg
c/w magazine bar loader.
The machine is in very good working order for the year, 2001, typical Swiss condition.
It has been well revised and maintained since they bought it new themselves in 2001.
They make a range of precise parts on it.
 
  4
IDMA35520
MakeCitizen
ModelL20VIII
YOM2004
ConditionGood Condition
PhotoSee Photo
MACHINING DIAMETER: 20MM
CUTTING TOOL SHANK/SLEEVE SIZE: 1/2"
MAIN SPINDLE INDEXING C-AXIS
ROTARY TOOL DRIVE: 1 KW
BACK SPINDLE DRIVE: .75/1.5 KW
MAIN SPINDLE DRIVE: 2.2/3.7 KW
RAPID TRAVERSE (X/Y/Z) 32M/MIN
FRONT ENDWORKING TOOLS 3
ROTARY TOOLS 7 (LIVE)
TURNING TOOLS 5
MAXIMUM CHUCK DIAMETER OF BACK SPINDLE 20MM
ROTARY TOOL SPEEDS 4,500 RPM
BACK SPINDLE SPEED 8,000 RPM
MAIN SPINDLE SPEED 10,000 RPM
MACHINING LENGTH 200MM
SUB-SPINDLE INDEXING C-AXIS
Control: Mitsubish Meldas
EQUIPPED WITH
COOL BLASTER HIGH PRESSURE COOLANT SYSTEM CAV 20L-IS 12' MAGAZINE BAR FEED MANUALS
 
  5
IDMI7994
MakeTsugami,Japan
ModelB0325-II
YOM2019/07
ConditionGood Condition
PhotoSee Photo
Bar capacity : 32mm
Control : Fanuc 32i-B
Maximum Bar Stock 32mm/1.26"
Axes 5
Sliding Headstock/Guide Bushing Yes
Convertible : Run w/o Guide Bushing(Chucker) Yes
Max Headstock Stroke w/Guide Bushing
Max Headstock stroke 330 mm/12.99"
Tool Position (std/max) 27/32
Live Tool Positions (std/max) 4/8
Main Spindle speed 200 - 8.000 rpm
Sub Spindle Speed 200 - 8,000 rpm
Live Tool Speed 6,000 rpm
Main Spindle Motor 3.7 / 5.5 kW
Weight 4,000 kg/8.814 lbs
2628 x 1280 x 1970 mm
Footprint : W x D x H 103.5 " x 50.4 " x 77.5"

w/o Guide Bushing
 
  6
IDMA35363
MakeStar
ModelSR32J
YOM2010
ConditionGood Condition
PhotoSee Photo
Max. machining diameter: ............... 32mm (1-1/4in)
Max. headstock stroke .................. 80mm(3-5/32in)
Tool shank: ............................ 16mm x 95-155mm
4-spindle sleeve holder
- Max. drilling capability: ........... 13mm(1/2in)
- Max. tapping capability: ............ M12xP1.75
- Max. die cutting capability: ........ M10xP1.5
Power Driven attachment
- Max. drilling capability: ........... 8mm(5/16in)
- Max. tapping capability: ............ M6xP1.0
- Max. milling capability: ............ 10mm(25/64in)
Main spindle speed: .................... max.7,000min-1
Main spindle motor(continuous/30min): .. 5.5kw/7.5kw
Power-driven att. spindle speed: ....... max.5,000min-1
Power-driven att. drive motor: ......... 1.0kw
Backworking Attachment
Max. chucking diameter: ................ 32mm (1-1/4in)
Max. length for front ejection: ........ 125mm(4-59/64in)
Max. parts projection length: .......... 45mm(1-49/64in)
4-spindle backworking unit
- Max. drilling capability
- - Stationary tool: .................. 13mm(1/2in)
- - Power-Driven tool: ................ 6mm(15/64in)
- Max. tapping capability
- - Stationary tool: .................. M10xP1.5
- - Power-Driven tool: ................ M5xP0.8
Sub spindle speed: ..................... max.7,000min-1
Sub spindle motor(continuous/15min): ... 2.2kw/3.7kw
Dimension (L x W x H, Approx): ......... 9' x 4' x 5'6"
Weight (approx): ....................... 8300 lbs

Equipped With
Fanuc 18iTB CNC Control
FMB Turbo 3-36 Barfeeder
High Pressure Coolant System
Chip Conveyor
Parts Conveyor
Ran Oil
 
  7
IDMI7992
MakeCitizen Cincon
ModelA20
YOM2011
ConditionGood Condition
PhotoSee Photo  |  See Video
Bar capacity : 20mm
Control : Fanuc 31i
QTY : 2NOS.
 
  8
IDMA35362
MakeCitizen
ModelL20VII
YOM1998
ConditionGood Condition
PhotoSee Photo
Max. Machining Diameter 3/4"/20mm
Max. Machining Length per one chuck 7.9"/200mm
Max. Drilling diameter up to .394"/10mm
Spindle speed 200-10,000 RPM
Back-Work:
Max. Chucking Dia. of Pick-off spindle .790"
Pick-off Spindle speed 200-8000 RPM
Pick-off Spindle Motor 2 HP
Min. Spindles Index 1 Deg.
Rotary Tool:
Rotary spindle speed 200-5000 RPM
Rotary Tool Motor .5 HP
Number of Tools Mounted:
Turning/Front ID/Back ID/Live Tools 6/3/3/4
Required Floor Space: 65"x37" plus B.F.
Weight (approx.) 3600 Lbs

EQUIPPED WITH:
Mitsubishi Meldas Windows Based CNC Controls
6 Turning Tools, 4 Live Tool Stations, 3 I.D. Tools, 3 Back Working Tools
(4) Live Spindles
C-Axis on Main and Sub Spindles
Cool Blaster High Pressure Coolant System
Iemca CH220/37 Bar Feed
Misc Tooling
 
  9
IDMA35165
MakeCitizen
ModelL20
YOM2017
ConditionGood Condition
PhotoSee Photo
DESCRIPTION:
2017 Citizen L20E Type VIII CNC Swiss Lathe, with Loader, Fire Suppression.

EQUIPPED WITH:

12' Patriot 338 Magazine Bar Loader
Parts Conveyor
Patrol Light
Fire Trace Fire Suppression System
Appears to be a full set of wenches/accessories for Collets & Guide Bushing
Machine was purchased with the following options:
Cut-off Tool Breakage Detector
Back Rotary Tool Drive Device
Sub-Micron/Sub Inch Command
Program Storage 160m (64kb)
Rotary Tool/ Main and Sub High-Speed Synchronous Tap
Canned Drilling Cycle
Main and Sub C axis Function
Tool Life Management
Milling Interpolation Function
Polygon Machining
Hobbing Machining
Helical Interpolation
Slant Helical Interpolation
Circular Thread Cutting

SPECIFICATIONS:

CAPACITY 0.75"
POWER 3.7 kW
RPM 10,000 RPM
# AXIS 7
SWISS, CHUCKER OR CONVERTIBLE? Swiss
MAIN SPINDLE INDEXING Full C
SUB SPINDLE INDEXING Full C
LIVE BACK WORKING TOOLS? Yes
CONTROL CNC (CINCOM M70LPC-VU)
General Specifications from OEM Brochure (Details should be confirmed by
buyer):
**Excellent Condition**
Item Type VIII
Model number L20E-2M8
Max. machining diameter (D) ∅ 20 mm (∅ 25 option)
Max. machining length (L) GB:200 mm/1chucking (188 mm: ∅25 spec.) NGB: 2.5D
Spindle through-hole diameter ∅ 26 mm
Main spindle speed Max.10,000 rpm
Max. chuck diameter of back spindle ∅ 20 mm (∅ 25 option)
Max. protrusion length of back spindle workpiece 30 mm
Max. protrusion length 80 mm
Back spindle speed Max.8,000 rpm
Gang rotary tool spindle speed Max.6,000 rpm (Rating 4,500 rpm)
Front rotary tool spindle speed (type X, XII) --
Back tool post rotary tool spindle speed Max. 7,500 rpm (Rating 6,000 rpm)
Number of tools to be mounted (max.) 37
Gang turning tool 5
Gang rotary tool 25
Front drilling tool 3
Back drilling tool 4
Tool size: Gang turning tool ½"
Tool size: Sleeve ¾"
Chuck and bushing: Main spindle collet chuck TF25 (TF30: ∅ 25 mm)
Chuck and bushing: Back spindle collet chuck TF25 (TF30: ∅ 25 mm)
Chuck and bushing: Rotary tool collet chuck ER11, ER16
Chuck and bushing: Chuck for drill sleeves ER11, ER16
Chuck and bushing: Guide bushing TD25NS (CD25: ∅ 25 mm)
Rapid feed rate: All axes (except Y2) 32 m/min
Rapid feed rate: Y2 axis --
Motors: Spindle drive 2.2 / 3.7 kW
Motors: Gang tool post rotary tool drive 1.0 kW
Motors: Back spindle drive 0.75 / 1.5 kW
Motors: Back tool post rotary tool drive 0.75 kW
Motors: Front rotary tool drive 0.75 kW
Motors: Coolant oil 0.4 kW
Motors: Lubricating oil 0.003 kW
Center height 1,050 mm
Rated power consumption 7.3 kVA
Full-load current 32 A
Main breaker capacity 40 A
Air pressure 0.5 MPa
Weight 5,182 lb
Floor dims: 3120 x 2320 mm plus length of loader
Approx Weight 4840 lbs
 
  10
IDMA35164
MakeCitizen
ModelA20
YOM2007
ConditionGood Condition
PhotoSee Photo
CITIZEN A20-VICL
SPECIFICATIONS:

MACHINING DIAMETER 0.8125"
MAX MACHINING LENGTH 2"
MAX DRILLING DIAMETER 0.375"
MAIN SPINDLE MOTOR 5 hp
MAIN SPINDLE SPEED 10,000 RPM
BACK SPINDLE SPEED 8,000 RPM
TOTAL TOOL CAPACITY (POSITIONS) 18
TOTAL LIVE TOOL CAPACITY (POSITIONS) 3
GANG SLIDE TOOL POSITIONS 7
BACK WORK TOOL POST POSITIONS 4
FRONT WORK TOOL POST POSITIONS 4
LIVE TOOL SPEEDS 6,000 RPM
CONTROLLABLE AXES 4
BAR CAPACITY 0.8125"
DIMENSIONS 84"L x 47" W x 71" H
WEIGHT 5,070

EQUIPPED WITH:

FANUC 32i-A
SLIDING HEADSTOCK
NON-GUIDE BUSHING
3 LIVE TOOL POSITIONS
6 AXES (X1, Y1, Z1, Z2, C1, C2)
4 CONTROLLABLE AXES
EDGE TECHNOLOGIES C-320 BAR FEEDER
COOL BLASTER CB510 HIGH PRESSURE COOLANT, 3 PORT, 2000PSI
COOL BLASTER 850 MIST CONTROL
FIRE SUPPRESSION SYSTEM
CHIP CONVEYOR
PARTS CATCHER
PARTS CONVEYOR
RIGID TAPPING
TOOLING INCLUDED:
(10) COLLETS
(1) BAR LOADER CONE PUSHER FOR BAR EJECTION
** ORIGINAL OWNER
** INSTALLED MAY, 2008
** RUNNING OIL
** CUTTING PRIMARILY TITANIUM
 
  11
IDMA35127
MakeCitizen
ModelB12
YOM1997
ConditionGood Condition
PhotoSee Photo
LNS Tryton Magazine Bar Loader
Quantity: 2
 
  12
IDMA34859
MakeTsugami,Japan
ModelB0265-II
YOM2018
ConditionGood Condition
PhotoSee Photo
NUMBER OF AXES 5
MAXIMUM LENGTH WITH GUIDE BUSHING 10.63"
MAXIMUM LENGTH WITHOUT GUIDE BUSHING 1.96"
NUMBER OF TOOL POSITIONS 27/39 (STD / MAX)
MAIN SPINDLE SPEED 200 – 10,000 RPM
SUB SPINDLE SPEED 200 – 10,000 RPM
LIVE TOOL SPEED 5,000 RPM
MAXIMUM BAR STOCK 26 #
MACHINE EQUIPPED WITH
CHUCKER KIT THREAD WHIRLING HEAD 12 FT IKURA BAR FEED IOS32VR II KIT OF COLLETS
 
  13
IDMA34778
MakeTsugami,Japan
ModelB0203-III
YOM2017
ConditionGood Condition
PhotoSee Photo  |  See Video
Controls: Fanuc Series 01-TD
Diameter Of Machining In Main Spindle: 3 To 20 MM
Max Processing Length: 210 MM
Max Diameter Of Drilling/Threading In The Main Spindle: 10 MM/ M10
Max Diameter Of Radial Drilling/Thread Cutting: 6 MM
Main Spindle Speed: 200-10,000 Rpm
Drive Tool Speed: 200-8,000 Rpm
13 Tool Positions
Number Of Tool Positions For External Machining In The Main Spindle: 9 Pcs (6+3)
Tool Holder Size: 12 X 12 X 85 MM
Number Of Tool Positions For Axial Tool: 4
Motor Drive Hp: 2.2 kW/ 3.7 kW 30 Mins
Power Tool Drive Tool: 0.75 kW
Engine Power Of The Coolant Pump: 0.25 kW
Rail Lubrication Pump Motor Power: 3 Watts
Working Feed: 1~6,000 MM/Min
Coolant Tank Volume: 115 L
Equipped with:
Caron TMAC Tool Wear Measurement Control System ($25,000 Add On),
Bar Feed Interface,
SMC Lynx Measurement Length Multi Counter CEU5PB-D,
Chasing Function,
Tool Nose Radius Compensation,
Tool Height Displacement Compensation,
Cylindrical Interpolation,
Polar Coordinate Interpolation,
Constant Surface Speed Control,
Spindle Synchronous Control,
Chamfering Corner R,
Spindle Speed Fluctuation Detection,
Continuous Threading,
Multiple Repetitive Cycle,
Canned Cycle for Drilling,
Rigid Tapping,
Cut Off Detector Differential Speed,
Background Editing,
Extended Part Programming Editing,
Direct Drive Rotary Guide Bushing,
Main Spindle C-Axis,
Live Tool Capable (no live tools included),
 
  14
IDMA34623
MakeTornos
ModelENC164
YOM
ConditionGood Condition
PhotoSee Photo
Control: FANUC O-TT,
Sub spindle and indexing,
Magazine bar loader
 
  15
IDMA34622
MakeTornos
ModelENC74
YOM
ConditionGood Condition
PhotoSee Photo
Control: FANUC O-TT,
Spindle capacity: 7mm,
Sub spindle and indexing,
Magazine bar loader.
 
  16
IDMA34569
MakeTsugami,Japan
ModelBN20
YOM2006
ConditionGood Condition
PhotoSee Photo
MAX TURNING DIAMETER 0.787"
MAX DRILLING DIAMETER 0.315"
CHUCKING DIAMETER 0.812" (BACK SPINDLE )
SPINDLE SPEEDS 20-10,000 RPM
RAPID TRAVERSE 472 IPM (X1,X2,X3)
MAIN SPINDLE MOTOR 7.5 HP
BACK SPINDLE MOTOR 3 HP
MACHINE EQUIPPED WITH
FANUC 18ITB CNC CONTROL
MP SYSTEMS 1000 PSI HIGH PRESSURE
COOLANT W/8 M CODES
COOLANT THRU SUB-SPINDLE
FMB MINUTE MAN AUTOMATIC BAR FEED SUB-SPINDLE FULL C-AXIS PARTS CATCHER CHIP CONVEYOR
 
  17
IDMA34568
MakeStar
ModelSR32J
YOM2005
ConditionGood Condition
PhotoSee Photo
NUMBER OF AXES 7
MAX MACHINING DIAMETER 1.26"
MAIN SPINDLE SPEED 7000 RPM
MAIN SPINDLE INDEXING C-AXIS (0.01-DEG)
MAX DRILLING CAPACITY 32"
MAX HEADSTOCK STROKE (STANDARD) 12.2"
MAX HEADSTOCK STROKE (ROTARY FLEXIBLE GUIDE BRUSH) 11.02"
GANG TOOL POST (TURNING TOOLS) 6 TURNING TOOLS
GANG TOOL POST (POWER-DRIVEN) 4 TOOL STATIONS
4-SPINDLE SLEEVE HOLDER (FRONTWORKING) 4 TOOLS
4-SPINDLE SLEEVE HOLDER (BACKWORKING) 4 TOOLS
MAX DRILLING CAPACITY (4-SPINDLE SLEEVE HOLDER) 0.512"
MAX DRILLING CAPACITY (POWER-DRIVEN ATTACHMENT) 0.315"
MAX TAPPING CAPACITY (4-SPINDLE SLEEVE HOLDER) M12 X 1.75
MAX TAPPING CAPACITY (POWER-DRIVEN ATTACHMENT) M6 X 1.0
MAX CHUCKING DIAMETER 1.26"
MAX PICK UP PART LENGTH 1.26"
MAX PICK UP PART LENGTH 4.92"
MAX PART PROJECTION LENGTH 1.77"
MAX SUB SPINDLE SPEED 7000 RPM
SUB SPINDLE INDEXING C-AXIS (0.01-DEG)
NUMBER OF TOOL STATIONS 4 STATIONARY OR POWER-DRIVEN TOOLS
MAX TAPPING CAPACITY M10 X 1.5
MAX FEED RATE (ALL AXES) 945 IPM
CONTROL
Fanuc 18I-TB
MACHINE EQUIPPED WITH
FANUC 18I-TB CNC CONTROL IEMCA BOSS 432/37 BAR FEEDER
 
  18
IDMA34440
MakeTsugami,Japan
ModelBO325II
YOM
ConditionGood Condition
PhotoSee Photo
Max. chucking bar stock diameter: 32 mm,
Main spindle speed '9rpm): 200-8,000
Back spindle speed (rpm); 200-8,000
Total tool number: 27
Max. machining length: 320 mm,
Main spindle C axis
With chip conveyor,
Bar feeder of lkura: 3 m,
Machine weight: 3500 kg,
Control: Fanuc 0iTD
 
  19
IDMA34373
MakeTornos
ModelCT20
YOM2016/02-2017
ConditionGood Condition
PhotoSee Photo
MAIN EQUIPMENT
CNC CONTROL “FANUC” Oi TD 2 CHANELS
10,4” COLOR SCREEN, ELECTRONIC HANDWHEEL, 1 MB MEMORY, PCMCIA Y USB, PROGRAMMING IN ISO CODE, LINEAR, CIRCULAR AND CYLINDRICAL INTERPOLATIONS, RIGID TAPPING
2 INDEPENDENT TOOL SYSTEMS
NUMBER OF TOTAL TOOL POSITIONS: 26
NUMBER OF ROTATING TOOLS: 10
MAIN SPINDLE AND COUNTER SPINDLE
UNLOADING PARTS DEVICE WITH PARTS CONVEYOR
“FOX” WS2-500 UNIT OF EXTRACTION HAZE OF OIL
CHIP CONVEYOR
BAR FEEDER “ROBOBAR” TYPE: SBF 326
COMPLETE TEHNICAL DOCUMENTATION
MAIN TECHNICAL DATA:
MAIN SPINDLE:
MAX.BAR DIAMETER: 20 MM
SPINDLE SPEED: 8.000 RPM
SPINDLE MOTOR: 2,2 KW
STANDARD WORKPIECE LENGTH WITH GUIDE BUSH: 210 MM “C”-AXIS
COUNTER SPINDLE:
MAX.BAR DIAMETER: 20 MM
SPINDLE SPEED: 8.000 RPM
SPINDLE MOTOR: 1,5 KW
MAX.PARTS LENGTH: 80 MM (WITHOUT REAR DISCHARGE) EJECTOR STROKE: 80 MM
“C” -AXIS
2 INDEPENDENT TOOL SYSTEMS NUMBER OF TOTAL TOOL POSITIONS: 26 NUMBER OF ROTATING TOOLS: 10
MOTORS, TOTAL POWER REQUIRED: 15 KVA, 400 V, 50 HZ
MACHINE DIMENSIONS (ONLY LATHE):
LENGTH X WIDTH X HEIGHT: 2.050 X 1.270 X 1.670 MM MACHINE WEIGHT: 2.400 KGS
BAR FEEDER: “ROBOBAR” TYPE: SBF 326
MIN-MAX BAR DIAMETER: 3 – 26 MM BARS: ROUND, HEXAGONAL, SQUARE BAR LENGTH: 4 MTS LOADING SYSTEM: SIDE LOAD RACK
 
  20
IDMA34341
MakeTornos
ModelCT20
YOM2016/2017
ConditionGood Condition
PhotoSee Photo  |  See Video
MAIN EQUIPMENT
● CNC CONTROL “FANUC” Oi TD 2 CHANELS
● 10,4” COLOR SCREEN, ELECTRONIC HANDWHEEL, 1 MB MEMORY, PCMCIA Y USB,
PROGRAMMING IN ISO CODE, LINEAR, CIRCULAR AND CYLINDRICAL INTERPOLATIONS,
RIGID TAPPING
● 2 INDEPENDENT TOOL SYSTEMS
● NUMBER OF TOTAL TOOL POSITIONS: 26
NUMBER OF ROTATING TOOLS: 10
● MAIN SPINDLE AND COUNTER SPINDLE
● UNLOADING PARTS DEVICE WITH PARTS CONVEYOR
● “FOX” WS2-500 UNIT OF EXTRACTION HAZE OF OIL
● CHIP CONVEYOR
● BAR FEEDER “ROBOBAR” TYPE: SBF 326
● COMPLETE TEHNICAL DOCUMENTATION
MAIN TECHNICAL DATA:
MAIN SPINDLE:
MAX.BAR DIAMETER: 20 MM
SPINDLE SPEED: 8.000 RPM
SPINDLE MOTOR: 2,2 KW
STANDARD WORKPIECE LENGTH WITH GUIDE BUSH: 210 MM
“C”-AXIS
COUNTER SPINDLE:
MAX.BAR DIAMETER: 20 MM
SPINDLE SPEED: 8.000 RPM
SPINDLE MOTOR: 1,5 KW
MAX.PARTS LENGTH: 80 MM (WITHOUT REAR DISCHARGE)
EJECTOR STROKE: 80 MM
“C”-AXIS
2 INDEPENDENT TOOL SYSTEMS
NUMBER OF TOTAL TOOL POSITIONS: 26
NUMBER OF ROTATING TOOLS: 10
MOTORS, TOTAL POWER REQUIRED: 15 KVA, 400 V, 50 HZ
MACHINE DIMENSIONS (ONLY LATHE):
LENGTH X WIDTH X HEIGHT: 2.050 X 1.270 X 1.670 MM
MACHINE WEIGHT: 2.400 KGS
BAR FEEDER: “ROBOBAR” TYPE: SBF 326
MIN-MAX BAR DIAMETER: 3 – 26 MM
BARS: ROUND, HEXAGONAL, SQUARE
BAR LENGTH: 4 MTS
LOADING SYSTEM: SIDE LOAD RACK
 
  21
IDMA34321
MakeStar
ModelSA16
YOM1999
ConditionGood Condition
PhotoSee Photo
Fanuc 18i
With bar feeder
Only one machine
 
  22
IDMA34089
MakeCitizen
ModelB12
YOM2000
ConditionGood Condition
PhotoSee Photo
1 degree indexing on main and subspindle,
Cross Milling/Drilling attachment,
Iemca Magazine Bar Loader.
 
  23
IDMA33955
MakeTornos
ModelDECO2000
YOM1999
ConditionGood Condition
PhotoSee Photo
Number of hours of the Tornos: 39,990 hours
Number of axes: 5
Tooling accessories provided: None because we keep the tools for the other tornos in our possession.
Tornos is then running,
With documentation
Tornos: CN FANUC, TB-DECO software, 1 electrostatic flue gas filter, 1 high pressure pump.

Strokes X1 and X2 = 25mm
Strokes Y1 and Y2 = 91mm
Stroke Z1 = 66mm
10 mm doll
Maximum spindle rotation: 10,000 rpm

The bar feeder type is a ROBOBAR SSF226 C-14910 year 1999

Tornos dimension: 1550 * 1000 * 1800 weight about 1500kgs
Robobar dimension: 4322 * 830 * 1335 estimated weight about 500kgs
 
  24
IDMA33783
MakeCitizen
ModelL20E-IX
YOM2013 December
ConditionGood Condition
PhotoSee Photo
Maximum turning diameter: 20mm,
Maximum turning length: 200mm,
Maximum front drilling diameter: 10mm,
Spindle through-hole diameter: 24mm,
Main spindle speed: 200-10,000 rpm,
Main spindle indexing: 0.001 degree,
Back spindle speed: 200-8,000 rpm,
Back spindle indexing: 0.001 degree,
IEMCA Smart 32 magazine bar loader,
LNS swarf conveyor
 
  25
IDMA33743
MakeCitizen
ModelL20E-2M8
YOM2018-08
ConditionGood Condition
PhotoSee Photo
Main spindle capacity: 25 mm,
Main spindle speed: 10,000 rpm,
Sub spindle capacity: 25 mm,
Sub spindle speed: 10,000 rpm,
LFV (Low frequency vibration),
Workpiece conveyor,
LNS L220 X-XII-VII HB swarf conveyor,
Firetrace 5kg CO2 fire suppression system,
LNS Alpha 320 S3 3.2m Magazine bar loader c/w 17 mm and 27 mm channel sets.
one live toolholder.
Overall weight of machine: 2350 kg
Machine in excellent condition. All equipment available will be included with the machine.
Machine is dated 2018 but was delivered new in November 2019
 
  26
IDMA33737
MakeMiyano
ModelBND-34S2
YOM1998
ConditionGood Condition
PhotoSee Photo
Control: Fanuc 0T, 8 turning and 8 fixed tool holder positions -16 positions total. Single 8 station turret with 4 driven positions. Main spindle: 34mm diameter. Turning diameter: 114mm. Spindle speed: 5000 rpm. Spindle power: 5.5kw. 5 degree indexing with C-Axis. Sub spindle: 34mm diameter. Sub spindle speed: 5000 rpm. Sub spindle power: 2.2kw. Multifeed short magazine bar loader. Manuals. No Tooling included with machine. Weight and dimensions: 2547 x 1495 mm. Machine weight: 3.800 kg. Machine no longer under power and cannot be seen running.
 
  27
IDMA33736
MakeCitizen
ModelL25
YOM1996
ConditionGood Condition
PhotoSee Photo
CITIZEN L25 CNC SWISS TYPE SLIDING HEAD AUTOMATIC LATHE
c/w IEMCA Boss 325 magazine bar loader
 
  28
IDMA33735
MakeCitizen
ModelK16VI
YOM2006
ConditionGood Condition
PhotoSee Photo
CITIZEN K16 VI CNC SWISS TYPE SLIDING HEAD AUTOMATIC LATHE
IEMCA 118 Genius magazine bar loader
 
  29
IDMA33734
MakeCitizen
ModelK16VI
YOM2006
ConditionGood Condition
PhotoSee Photo
CITIZEN K16 VI CNC SWISS TYPE SLIDING HEAD AUTOMATIC LATHE
IEMCA 118 Genius magazine bar loader
 
  30
IDMA33720
MakeCitizen
ModelL20E-IX
YOM2014 - January
ConditionGood Condition
PhotoSee Photo
Maximum turning diameter: 20mm,
Maximum turning length: 200mm,
Maximum front drilling diameter: 10mm,
Spindle through-hole diameter: 24mm,
Main spindle speed: 200-10,000 rpm,
Main spindle indexing: 1 degree,
Back spindle speed: 200-8,000 rpm,
Back spindle indexing: 1 degree,
IEMCA Smart 32 magazine bar loader,
LNS swarf conveyor
 
  31
IDMA33533
MakeGoodway
ModelSD16
YOM2013
ConditionGood Condition
PhotoSee Photo
Capacity: 16mm,
Control: Fanuc,
Spindle speed: 10,000 rpm,
Sub-spindle speed: 8,000 rpm,
No live tooling,
Collets, tool holders and guide bushes included.
Bloader 4 meter, magazine bar loader
 
  32
IDMA33514
MakeCitizen
ModelA20
YOM2007
ConditionGood Condition
PhotoSee Photo
CITIZEN A20 CNC
SWISS TYPE SLIDING HEAD AUTOMATIC LATHE
IEMCA Smart 316 magazine bar loader.
 
  33
IDMA33513
MakeCitizen
ModelA20
YOM2008
ConditionGood Condition
PhotoSee Photo
CITIZEN A20 CNC
SWISS TYPE SLIDING HEAD AUTOMATIC LATHE
IEMCA Smart 316 magazine bar loader.
 
  34
IDMA33511
MakeCitizen
ModelC16
YOM2004
ConditionGood Condition
PhotoSee Photo
CITIZEN C16 VII CNC
SWISS TYPE SLIDING HEAD AUTOMATIC LATHE
Cool Blaster,
Swarf conveyor,
IEMCA 118 Genius magazine bar loader
 
  35
IDMA33510
MakeCitizen
ModelL20
YOM2004
ConditionGood Condition
PhotoSee Photo
CITIZEN L20 CNC
SWISS TYPE SLIDING HEAD AUTOMATIC LATHE
IEMCA Boss magazine bar loader,
LNS Swarf conveyor,
Cool Blaster
 
  36
IDMA33509
MakeCitizen
ModelL20
YOM2001
ConditionGood Condition
PhotoSee Photo
Citizen L20 CNC
Swiss Type Sliding head automatic Lathe
IEMCA Genius 22 Magazine bar loader.
 
  37
IDMA31048
MakeStar
ModelKJR-16
YOM1990
ConditionGood Condition
PhotoSee Photo
STAR KJR - 16 TYPE B CNC SLIDING HEAD LATHE
Control : Yasnac,
Maximum bar capacity : 16mm,
5 Axis simultaneous control,
Main Spindle indexing : 0.01 degrees,
Sub Spindle (No C-Axis),
Twin Turret,
2 cross drilling,
1 tapping unit,
2 face milling,
1 face tapping,
3 milling units,
27 various drill and tool holders.
3 Metre FMB Mini Turbo Magazine Bar Loader,
 
  38
IDMA17718
MakeAkebono
ModelMinc 20
YOM1999
ConditionGood Condition
PhotoSee Photo
Fanuc Ot Control
top