VKengg.co.in

Category : Forging Equipment

Sub-Category : Press Cold Forging

Total Machines Found : 82

Select	| Machine Details
1	ID MA39597 Make AIDA Model K-25 YOM 1981 Condition Good Condition Photo See Photo Capacity:250 Tons Stroke length (mm):140 mm Strokes per minute (spm):50 mm Bolster area (left and right x front and back) (mm):600×500 mm Slide area (left and right x front and back) (mm):500× 400 mm Die height (mm):350 mm Slide adjustment length (mm):15 mm Main motor (kW):22 kw Air pressure used (kgf/cm):5 Emergency stop time (ms):234 Maximum two-handed operation (ms):239 Overrun monitoring device setting position:12° ±3° 2 Units available
2	ID MA39561 Make AIDA Model K-25 YOM 1981 Condition Good Condition Photo See Photo Capacity:250 Tons Stroke length (mm):140 mm Strokes per minute (spm):50 mm Bolster area (left and right x front and back) (mm):600×500 mm Slide area (left and right x front and back) (mm):500× 400 mm Die height (mm):50 mm Slide adjustment length (mm):15 mm Main motor (kW):22 kw Air pressure used (kgf/cm):5 Emergency stop time (ms):234 Maximum two-handed operation (ms):239 Overrun monitoring device setting position:12° ±3°
3	ID MI11407 Make Komatsu Model MKN800 YOM Condition Good Condition Photo See Photo  |  See Video Capacity : 800 Ton Stroke:170mm Shut Height:900mm Die Height:750mm Adjust:60mm SPM:32mm Bolster:848mm x 1000mm Slide: 760 x 800mm Bed Knockout:40Ton Knockout Stroke:70mm
4	ID MA39527 Make AIDA Model PK63 YOM Condition Good Condition Photo See Photo Capacity:630 Ton Stroke Length:140mm Strokes/min.:20~40spm Die Height:470mm Slide Adjustment:15mm Slide dimension:430 x 600mm Bolster dimension:560 x 700mm Other details :Electric motor for slide adjustment : 1.5kw x 4P WITH 3 DIE SET AVAILABLE
5	ID MA39526 Make AIDA Model PK-200 YOM 1979 Condition Good Condition Photo See Photo Capacity:2000 Tons Stroke Length:220mm Strokes/min.:18spm Die Height:850mm Slide Adjustment:15mm Slide dimension:900X1000 mm Bolster dimension:900X1000 mm Automation :With Automation WITH 1 DIE SET AVAILABLE
6	ID MA39505 Make Graebener Model KFP 800/3328 YOM Condition Good Condition Photo See Photo Pressure total: 800 ton Stroke: 400 mm Slide adjustment: 160 mm Shut height (stroke down, adjustment up): 800 mm Table surface area : 1000 x 1000 mm Slide area: 1000 x 1000 mm Number of strokes: 18 s.p.m. Distance between the guardrails: 850 mm Free frontal opening L-R: 1050 mm Ejector in table: 100 ton Lower ejector stroke: 400 mm Required power: 132 kW
7	ID MA39474 Make Komatsu Model L1C-400 YOM Condition Good Condition Photo See Photo Capacity - 400 Ton Number of slide strokes - 30 spm Slide Stroke - 250 mm Die Height - 630 mm Slide Adjustement - 40 mm Slide Dimensions - 700x500 mm Bolster Dimensions - 700x600x100 mm
8	ID MA39473 Make Komatsu Model L1C-400 YOM Condition Good Condition Photo See Photo Capacity - 400 Ton Number of slide strokes - 30 spm Slide Stroke - 250 mm Die Height - 630 mm Slide Adjustement - 40 mm Slide Dimensions - 700x500 mm Bolster Dimensions - 700x600x100 mm
9	ID MA39472 Make AIDA,Japan Model PK-63(6) YOM Condition Good Condition Photo See Photo Capacity : 630t, Stroke length : 140mm Number of stroke : 20~40 spm Die height : 470mm Slide adjustment : 15mm, Bolster dimension (left to right x front to back) : 560 x 700mm, Slide dimension (left to right x front to back) : 430 x 600mm, Electric motor for slide adjustment : 1.5kw x 4P, WITH 3 DIE SET
10	ID MA39471 Make Cleveland Model 10K YOM Condition Good Condition Photo See Photo CAPACITY - 1000 tons SHUT HEIGHT - 714mm SLIDE STROKE- 400mm SPM - 25 Slide adjustment - 12.7 mm Slide area - 900x910 mm Bolster area - 889x1117 mm Bolster thickness - 200 mm Main motor - 40 HP Machine Height - 6172 mm Machine floor area - 2450x2463 mm Ejection knockout - 150 mm
11	ID MA39454 Make Dongwoo Model YOM Condition Good Condition Photo See Photo 600-ton single press Stroke: 280~ Die height: 900~ Open height: 1180
12	ID MA39313 Make AIDA,Japan Model PK40 YOM 1976 Condition Good Condition Photo See Photo Capacity - 400 T Stroke Length 140 mm Strokes per minute 45 spm Bolster area (left and right x front and back) 480 x 600 mm slide area (left and right x front and back) 370 x 500 mm Distance between slide bolsters 370 mm Slide adjustment length 15 mm main motor kw 30 Air pressure use clutch brake 4.5 Air Rise kg/cm2 4.5
13	ID MA39231 Make Komatsu Maypress Model MKN2-300/8 YOM 1978 Condition Good Condition Photo See Photo Pressure 300 t Column width 480 mm Stroke 88 mm Installation height 380 mm Ram adjustment 40 mm Stroke rate 50 strokes/min Table area 700 x 450 mm Ram area 480 x 470 mm Drive power 5.5 kW Space required approx. 2.0 x 1.6 x 3.3 m Control conventional
14	ID MA39115 Make JEIL Model JKP-400 YOM 1990 Condition Good Condition Photo See Photo Total Length: 400 mm Stroke: 180 mm Number of Rotations: 45 RPM Number of Teeth: 22 Motor Output: 15 kW Distance between Centers: 640 - 500 mm Distance between Centers: 865 - 600 mm Total Height: 150 mm Motor: 1.5 kW x 4P x 1/30 Air Consumption: 0.37 m³/min Water Consumption: 5 L/min Additional Specifications: Weight: 16 kg Material: 30
15	ID MA38992 Make Graebener Model YOM 1979 Condition Good Condition Photo See Photo Capacity :250 Tons Lift Height:200 mm Installation Height:500 mm Number of Strokes:40 /min Ram Adjustment:100 mm
16	ID MA38958 Make Komatsu Model L2C630 YOM 1984 Condition Good Condition Photo See Photo Pressure Capacity:630 Tons Number Of Strokes:22-45 SPM Stroke Length:250mm stroke Die Height:710 mm Slide Adjustment Amount:50 mm Slide Dimension Left And Back *Front and Back:1000*900 mm Bolster Dimensions : Left And Back *Front and Back *Thickness :1000*900*120 mm Sudden Stop Time:250 ms
17	ID MA38948 Make Colombo Agostino Model YOM Condition Good Condition Photo See Photo Capacity:1000 ton Stroke:200 mm SPM:13 -40 Shut Height:260 mm Slide:1000 x 600 mm Bed:1000 x 650 mm Slide Adjust:20 mm Between Guides:1050 mm Machine Weight:85,000 kgs
18	ID MA38922 Make SMG Model HKP1500-2150/1300 YOM 1997 Condition Good Condition Photo See Photo  |  See Video TOTOAL PRESS CAPACITY : 15000kn slide capacity :15000 kn slide retraction : capacity: 800 slide stroke : 500mm daylight bed-slide up: 1800mm slide area : width x depth: 2150 x 1300 clear with between the up rigths bed are : 2160 ejector beam in the press bloster for five station enjector force : 800 kn ejector stroke: 400 mm diameter of ejector bolts : 59mm enejctor speed : 250 mm/s enjector in the slide: 5 ejector force : 100 kn enejctor storke: 130mm distance between enjector: 350mm power rating : 2x 250 kw pump rating : 4 x560/ 1200 rpm/1min rapid downstroke / upstroke: 500/500 mm/s v max / v at nominal capacity : 68/30 opening in the upright( width x hiegth): 700 x 1400 admissible of cebnter load of the slide from left to rigth safety gaurd at front /back : 1500knm x/x weight of the machine : 133200 kg oil quantity of one tank filling : i aproxx 7500 operating voltage : three-phase current : 440 v control voltage : 110v AC valve voltage : 24 DC lamp voltage : 24 DC frequency : 60 HZ ADDITIONAL EQUIPMENT: 1) THERMOSTATIC CONTROLE OF THEW OIL COOLING 2) SLIDE LOCKING AT TDC 3) PARRALELISM MONITORING 4) CENTRALIZED GRAEASE LUBRICATION WITH MOTORPUMP. 5)CHIP GAURD LOCATED AT THE FRONT AND BACK SIDE OF THE PRESS LIFTED PNUEAMATICALLY AND SECURREDBY LIMIT SWITCHES 6)SMG -NUMERIC CONTROLE SYSTEM S1 WITH SCREEN DISPLAY 7) 1 ADDITIONA;L EMERGENCY STOP BUTTON AT THE PRESS BACK SIDE DIE CHANGE AID CONSTITING OF 4 HYDRAULIC DIE CLAMP IN THE BLOSTER 200kn EACH 4 HYDRAULIC DIE CLAMPS IN THE SLIDE 200 kn each HYDRAULIC ROLL BLOCKS IN THE BLOSTER DIE CHANGE BRACKETS AT THE BLOCKS IN THE BLOSTER DIA CHANGE BRACKETS AT THE PRESS FRONT,LENGTH 1300mm SWING -TYPE MOTORIZED STROKE ADJUSTMENT BY MEANS OF WEDGES ON THE PRESS BLOSTER ADJUSTABLE RANGE UP TO 12mm
19	ID MA38916 Make Komatsu Japan Model MKN600 YOM 1970 Condition Good Condition Photo See Photo Main Motor Power : 5 kW Capacity 600 ton Remark Suitable for cold forging Table Dimension : 600x600 Stroke 180 mm. Mold Height 520 mm. Ram Setting 50 mm. Propeller Stroke : 80 mm.
20	ID MA38910 Make NAIGARI Model NCH-2000 YOM Condition Dismantled,Good condition Photo See Photo  |  See Video 1. pressure capacity:2000 ton.f 2. up speed:120 ton.f 3. strock:700mm 4. dight hight:1500mm 5. max” down speed:300 mm/sec 6. pressure speed: upto 905 ton.f 32.5 mm/sec 905—2000 ton.f 32.5—15 mm/sec 7.max” up speed:300 mm/sec 8.slide: RL x FB : 1200 X 1000 mm RL X FB 1200 X 1000 mm 9.knock out:200 ton.f 10.knock out strock:300 mm 11.knock out up speed: upto 85 ton.f 96 mm/sec 85—200 ton.f 96—42 mm/sec 12.knock out down speed:100 mm/sec 13.bolster height: more then FL 410 mm/over 14.hudraulic part: Main pomp: 255kgf/cm2 565l/min 2 nos Sub pump: 265 kgf/cm2 435l/min 1 nos Pilot pump: 100 kgf/cm2 27.5l/min 1 nos 50 kgf/cm2 11l’min 1 nos 20 kgf/cm2 68l/min 1 nos Main motor: 3pulse 380v 60hz 110kw x 6p 2 nos Sub motor:3pulse 3pulse 380v 60hz 90kw x 4p Pilot servo motor: 3 pulse 380v 60hz 15kw x 4p 1 nos Capacity of hydraulic: main tank 4000L Upside tank 2500L 15.utilities: Power: 3 pulse 380c 60hz Primary voltage: 450kva Air pressure: 4,5kgf/cm2 1m2/min Temperate for water: under:25c 250l/m
21	ID MA38766 Make Mori Model MSF200-M22 YOM 2014 Condition Good Condition Photo See Photo Capacity: 200 Ton Stroke Length - 150 mm Open Height - 600 mm Slide Max. descending speed - 175mm/s Power - 220 V With accessories
22	ID MA38715 Make AIDA Model PK-200 YOM 1979 Condition Good Condition Photo See Photo Capacity :2000 Tons Ability (tf):2000 Stroke Length (mm):220mm Stroke number (spm):18 Bolster Area (left and right xfront and back(mm):900*1000 mm Slide Area((left and right x front and rear) (mm):900*1000 mm Die Height:850 mm Slide Adjustment length:15 mm Main Motor :150 kw Operating Air Pressure (kgf/cm):5 Emergency Stop Time(ms):250 Two Handed operation (ms):250 Overrun Monitoring setting Device:12+3
23	ID MA38713 Make AIDA Model PK25 YOM Condition Good Condition Photo See Photo Capacity :250 Tons Stroke :140 Stroke per minute:50 Die Height :350mm Slide Adjustment :15mm Bolster Area:400 x 500mm Slide Area :300 x 400mm Main motor:22KW with Lower Ejector
24	ID MA38676 Make AIDA Model K-250 YOM 1989 Condition Good Condition Photo See Photo SPM:50 Stroke:160 mm Die Height:350 mm Adjust:15 mm Slide:500 x 400 mm Bolster:600 x 500 mm With Die Cushion
25	ID MA38655 Make TMP VORONEZH Model KA2534 YOM 1985 Condition Good Condition Photo See Photo Capacity -250 Ton Stroke Per Minute-32 Ram Struck-250 Shut height 560 mm Adjustment 140 mm Table 850 x 850 mm Ram dimension -650 x 670 mm Length -3260 MM Width -2970 MM Height -5140
26	ID MA38569 Make Grabener Model YOM Condition Good Condition Photo See Photo GRABENE 800 TN MECHANICAL COLD FORGING PRESS + FEEDER + TANSFER ELECTRIC RETROFITTING 2017 TABLE 1000 X 1000 MM PRESSURE TANK 2150 X 700 X 900 MM WEIGHT 300 KG EXPELLER AND SMALL PARTS 1400 KG GUIDE PISTON 900 KG STOP GUIDE 1900 KG DISTRIBUTION CABINET 450 KG DISTRIBUTION CABINET PARTITION 1300 X 1700 X 500 MM DISTRIBUTION CABINET PARTITION 1200 X 1600 X 400 MM CAPACITY 18 PARTS/MIN MAX. PART DIAMETER 50 MM MAX. PART LENGH 250 MM POWER 132 KW
27	ID MA38483 Make SMG Model HKP 1000-1300/1000 YOM 1987 Condition Good Condition Photo See Photo  |  See Video Total Capacity :10000 Kn Drawing Slide Force:9000 Kn Drawing Slide Pull Back Force:800 kn Stroke:500mm Bed Area Size (Width* Depth):1300*1070mm Open Height:1550mm Clear Distance between Uprighs :1300 mm Slide Area : 1300* 1000 mm Table Ejector Force:630 kn Table Ejector Stroke:400 mm Table Ejector Area: 60.5 mm Drive Capacity :3*110 kw Pump Capacity:3*350/1800 1/min u/min Rapid Closing Speed (down/up): 400/450 mm/s Maxworking Speed speed at max pressure:52/34 mm/s slide Ejector Force:3*100 kn Slide Ejector Stroke:120 mm Slide Ejector Area per Each:50.5 mm Frame Opening (width *height):570*1110 mm Blank Holder Relative Stroke adjustment manual /motor
28	ID MA38407 Make Komatsu Model L1C250 YOM 1990/1982 Condition Good Condition Photo See Photo Komatsu Forging Press L1C250/Made in 1990 Capacity 250 Stroke length 140 Number of strokes 55 Bolsta 600 x 500 Komatsu Forging Press L1C250B/Made in 1982 Capacity 250 Stroke length 140 Number of strokes 55 Bolsta 600 x 500
29	ID MA38398 Make Hwail Model HKLP-1000 YOM 2014 Condition Good Condition Photo See Photo Capacity - 1000 Ton Stroke - 350 mm SPM - 25-30 Die Height - 900 mm Slide Adjust - 50 mm Table size - 1200x1100 mm Bolster Area - 1200x1100 mm Bolster Thickness - 300 mm Bed Knock Out (Option) Type - Mechanical Capacity - 20 ton Stroke Length - 100 mm Stage - 1 mm
30	ID MA38354 Make SIMPAC Model SS-1200 YOM 2007 Condition Good Condition Photo See Photo  |  See Video CAPACITY:1200 Tons STROKE LENGTH :300 MM STROKES PER MINUTE :12-24/10 SPM SLIDE ADJUST::250 MM SLIDE AREA : 1500*1600 MM BOLSTER AREA:(LR*FB 1400*1600 DIE HEIGHT :700 MM BOLSTER THICKNESS:300 MM ADJUST MOTOR :3.7 KW 6 P MAIN MOTOR :150 KW 4P (D.C) SIDE OPENING SIZE :800*900 MM WORKING HEIGHT:750 MM MAIN VOLTAGE :380 VAC CONTROL VOLTAGE :110 VAC
31	ID MA38345 Make Graebener Model YOM 1972 Condition Good Condition Photo See Photo  |  See Video Stroke: 400 mm Slide adjustment: 160 mm Shut height (stroke down, adjustment up): 800 mm Table surface area : 1000 x 1000 mm Slide area: 1000 x 1000 mm Number of strokes: 18 s.p.m. Distance between the guardrails: 850 mm Free frontal opening L-R: 1050 mm Ejector in table: 100 ton Lower ejector stroke: 400 mm Required power: 132 kW
32	ID MA38287 Make Komatsu Maypress Model MKN2-600/14 YOM 1989 Condition Good Condition Photo See Photo  |  See Video Capacity - 600 Ton Shut height (top of bed):540 mm Adjustment dimensions:50 mm number of strokes:40 rpm Stroke of slide: 148 mm, Bolster dimensions (left, right, front and back x thickness) 630X900X120 mm Slide-o method (left, right, front, back, approx.
33	ID MA38278 Make OKP Model 1250/100-S YOM Condition Good Condition Photo See Photo Capacity -12500 kN Power retraction 700 kN Upper ejector 400 kN Bottom ejector 1000 kN Pressing 0kN up to 5500kN 30mm/sec Pressing 5500 kN up to 12500 kN 14 mm/sec Closing 450mm/sec Opening 320mm/sec Upper ejector 0 kN up to 170 kN 225 mm/sec Upper ejector 170 kN up to 400 kN 85mm/sec Upper ejector return 265 mm/sec Bottom ejector 0 kN up to 430 kN 85 mm/sec Bottom ejector 430 kN up to 1000 kN 32mm/sec Bottom ejector return 100mm/sec Tool Space dimensions :- Press stroke 450mm Stroke upper ejector 100mm Stroke bottom ejector 200mm Daylight 1400mm width between uprights 950mm Clamping area top 630 x 1200mm Clamping area bottom 649 x 1200mm Electric equipment:- Control EL 1047 Driving power max 230 kW 440C 60 Hz working voltage 440 V 60 Hz Control voltage 110V 60 Hz 24 V DC Operating Material :- Oil 3200 I (see our recommendation for hydraulic oil) water 150 I/min at 5 to 6 bar water pressure, max.20 C Air 1.5 m3/h at 5 to 6 bar air pressure Special equipment :- One station tool with inserts for cold flow pressing of one workpiece upper and lower ejector mechanical/hydraulical ram locking device mechanical stroke limitation light barrier for the front of the press and door at the rear Total weight of the press installation 57000kg floor space required circa 6,8 x 3,8 m
34	ID MA38277 Make CMB Model HKP1500-2150/1300 YOM 1997 Condition Good Condition Photo See Photo Total Press Capacity :KN 15000 SLide Capacity :Kn 15000 Slide Retraction Capacity :kn 800 Slide Stroke :500 mm Daylight Bed -slide up:1800 mm Slide Area(Width *Depth):2150*1300 Clear Width Between the uprights 2160 mm Bed Area (Width *depth) 2150*1300 Ejector Beam in the press bolster for five Stations Ejector Force:800 Kn Ejector Stroke mm
35	ID MA38266 Make JEIL Model YOM 1990 Condition Good Condition Photo See Photo STROKE:160mm BOLSTER AREA:700mm*600mm HIE HEIGHT:450mm SPM:45
36	ID MA38256 Make CMB Model YOM New 1997 Condition Good Condition Photo See Photo Capacity -1500 Ton Total Slide - 1500 Ton Slide Retraction Capacity -800 kn Slide Stroke -500 mm Daylight Bed -Slide up - 1800 mm Slide Area -(Width x Depth ) -2160 mm Clear width Between the unwrits -Bed Area (width x depth ) -2150 x1300 mm Ejector Beam in the press Bolster for Five station - Ejector Force -800 kn Ejector Stroke - 400 mm Diameter orf Ejector bolts -59 mm Ejector Speed - 259 mm/s Ejector in the Slide - 5 pieses Ejector Force -100 kn Ejector Stroke - 130 mm Distance Between the Ejectors - 350 mm/s Power Rating - 2 x 250 kw Pump Rating - 4x 560/1200 1/min ,RPM Rapid Downstroke /Upstroke - 500 / 500 mm/s V Max . / V at Nominal capacity -68 /30 MM Opening In the Upright (Width x Height ) - 700 X 1400
37	ID MI10611 Make Ameteep Model YOM Condition Good Condition Photo See Photo Capacity - 200 Ton Slide area - 600x750 mm Slide Adjustability - 100 mm Slide Shank Hole - 50 mm Slide Stroke - 250 mm Bolster Area - 750 x 900 mm Shut Height - 555 mm
38	ID MI10547 Make Ameteep Model YOM 1999 Condition Good Condition Photo See Photo Capacity - 200 Ton Slide area - 600x750 mm Slide Adjustability - 100 mm Slide Shank Hole - 50 mm Slide Stroke - 250 mm Bolster Area - 750 x 900 mm Shut Height - 555 mm
39	ID MA38134 Make AIDA Model YOM Condition Good Condition Photo See Photo Capacity - 1000 Ton Slide Stroke - 400 mm Stroke Per Minute : No Load - 25-35 spm Die Height - 1000 mm Slide Adjustement - 50 mm Slide Area L.R x F.B - 1500 x 1200 mm Bolster Area L.R x F.B - 1500 x 1200 mm Main Motor - 160 kw Required Air Pressure - 0.5 mpa Press : AIDA 1000 Ton (Japan) Die Set : YAMANAKA Eng (Japan) Airtight Forging Die Set : YAMANAKA Eng (Japan) Dust Collecter : SAMWON (Korea) Servo Transfer Equipement : 5 Stage
40	ID MA38133 Make AIDA Model YOM Condition Good Condition Photo See Photo Capacity - 1500 Ton Slide Stroke - 400 mm Stroke Per Minute : No Load - 15-31 spm Die Height - 1000 mm Slide Adjustement - 50 mm Slide Area L.R x F.B - 1500 x 1200 mm Bolster Area L.R x F.B - 1500 x 1200 mm Main Motor - 230 kw Required Air Pressure - 0.5 mpa Max. Upper Die Weight - 4000 kg Press : AIDA 1500 Ton (Japan) Die Set : YAMANAKA Eng (Japan) Airtight Forging Die Set : YAMANAKA Eng (Japan) Dust Collecter : SAMWON (Korea) Servo Transfer Equipement : 5 Stage Slug Supply Equipement : BUMAH (Korea)
41	ID MA38112 Make AIDA Model CFD-40 YOM Condition Good Condition Photo See Photo Capacity- 400 ton Stroke- 200 mm SPM -45 Die Height -450 mm Adjust -50 mm Bolster -650 x 500 mm Slide -550 x 370 mm
42	ID MA38051 Make Komatsu Model YOM 1989 Condition Good Condition Photo See Photo Capacity :1000 Tons Pressure capacity (at 6mm above bottom dead center) Slide stroke length Die height (from the top of the bolster to the bottom of the slide) Slide adjustment amount Number of slide strokes continuous Distance between shapes Slide dimensions (left and right x front and back) 5&16 ~ 40 pm Polster dimensions (left and right x front and back x thickness) balancer ability 5 TON Bed knockout capacity 1 station maximum 25TON total 100 TON stroke Work load (continuous operation at 30~40 spm) Allowable load per process Allowable load per point Main motor output Feed stroke (distance between molds) Clamp stroke (on one side) lift stroke 500 TON 500 TON DC 110 KW
43	ID MA38049 Make AIDA,Japan Model CFT100 YOM 1983 Condition Good Condition Photo See Photo  |  See Video Cold Forging Transfer Press Capacity : 1000 Ton Slide stroke : 250 mm Speed : 20 ~ 35 SPM Die height : 600 mm Adjustment : 30 mm Bolster size : 1500 x 1200 mm Slide size : 1500 x 1100 mm Main motor : 130 kW With Transfer System
44	ID MI9711 Make Cleveland Model YOM Condition Good Condition Photo See Photo 1000 TON KNUCKLE JOINT PRESS FOR COLD FORGING PURPOSE
45	ID MI9414 Make Cleveland Model YOM Condition Good Condition Photo See Photo Bed size 1000x1000 mm Stock lenthe 225 mm Wide 12 feet Front to back 10 feet Hight 22 feet Weight Aprox 55 ton
46	ID MA36551 Make AIDA,Japan Model PK-40 YOM Condition Good Condition Photo See Photo Stroke : 140 mm, SPM : 45, Bolster : 400 x 600 mm, Slide : 370 x 500 mm, Die Height : 370 mm, Adjust : 15 mm, Knockout : 20 tons, Knockout stroke : 70 mm, Main Motor : 22 Kw x 4p.
47	ID MA36547 Make Chin Fong,Taiwan Model KP400 YOM Condition Good Condition Photo See Photo Stroke Length: 160mm Speed:25-40 Die Height: 400mm Maximum Upper Dia Weight:800kgs Bolster are:550mm x 660mm slide area :400mm x 500mm Slide Adjustment: 15mm Bolster Thickness: 120mm
48	ID MA36392 Make Hanoul Model HKKJ-250 YOM 2013 Condition Good Condition Photo See Photo  |  See Video Stroke: 120mm Number of Stroke:50spm Area of Bolster:600 x500mm Area of Slide: 550 x 450 Adjustment of slide:15mm Die Height: 400mm
49	ID MA36385 Make AIDA Model CFT-1200 YOM Condition Good Condition Photo See Photo Cold Forging Transfer Press Capacity - 1200 Ton 11.81" Stroke (300 mm) 30.31" Die Height (770 mm) 1.18" Slide Adjustment (30 mm) 72.84" LR x 35.43" FB Bolster Area (1850 mm x 900 mm) 70.87" LR x 27.56" FB Slide Area (1800 mm x 700 mm) 25-40 SPM Variable In Plant Under Power
50	ID MA35761 Make Liebergeld Model KCL(G) 630/140-5.000/2 YOM Condition Good Condition Photo See Photo Capacity: 630 ton, Drive capacity: 60 kW, Stroke; 140 mm, Stroke rate: 60 min^-1 Shut height: 600 mm, Table Size (left to right): 630 mm, Table size (front to back): 900 mm, Ram (left to right): 630 mm, Ram (front to back): 630 m,, Ram adjustment: 20 mm, Lower ejector: 3 Lower ejector (power): 50 t, Lower ejector (stroke): 50 mm, Dimensions: 5000 x 2400 x 2800 mm, Total weight: 35 ton
51	ID MA35652 Make Mori Iron Works Model MSF500-M33 YOM 2013 Condition Good Condition Photo See Photo Capacity:507.98 Metric Tons Die Space Area Open Height: 1000mm Slide Area: 890mm x 850mm Slide Die Set Size: 650mm x 650mm Bolster Area: 850mm x 850mm Bolster Die Set Size: 650mm x 650mm Lower Bolster Top Surface Height: 1695mm Main Press (Piston Type) Max. Stroke: 450mm Max. Pressurization Capacity: 5000kN x 18 mm/sec Pressurized (Variable): 500 kN - 5000 kN Pressurization Speed (Variable): 1 mm/sec - 18 mm/sec No-Load Speed - High Speed Descent Max.: 200 mm/sec No-Load Speed - High Speed Rise: 200 mm/sec Pulling Power: 300 kN Positioning Accuracy: +/- 0.05mm Load Accuracy: +/- 250 kN Control Method: Selectable Position Control or Pressure Control Inner Press (Piston Type, Main Slide, and Main Sub Style) Head Diameter: 6mm - 50mm Max. Stroke: 200mm Max. Pressurization Capacity: 2000 kN x 20 mm/sec Pressurized (Variable): 200 kN - 2000 kN Cushion Pressurization Capacity: 200 kN - 2000 kN Pressurization Speed: 1 mm/sec - 20 mm/sec Rise Speed (Variable): 1 mm/sec - 20 mm/sec Back Pressure Tracking Speed: 30 mm/sec Max. Lower Limit Positioning Accuracy: +/- 0.05mm Load Accuracy: +/- 100 kN Cushion Pin Diameter: 80mm Stroke: 85mm Max. Pressurization Capacity: 1200kN x 20 mm/sec
52	ID MA35651 Make Komatsu Maypress Model MKN2-600 YOM Condition Good Condition Photo See Photo Capacity: 600 ton, Stroke of slide: 140 mm, Max. pressure: 600 to, No .of strokes: 40 per min Speed of flywheel: 550 rpm, Power required; 20 kW Weight: 26 ton
53	ID MA35642 Make Wilkins & Mitchell Model S1-1250-42-48 YOM Condition Good Condition Photo See Photo Capacity : 1250 ton Stroke per minute : 18 Stroke of press : 20 INS Bolster(R-L) : 42 INS. Slide(F-B) : 48 INS. Bolster(F-B) : 42 INS. Shut height max. : 42 INS. Shut height min. : 32 INS. Quantity: 2
54	ID MA35588 Make AIDA,Japan Model FMX-L2-630T YOM 2014 Condition Good Condition Photo See Photo 630 Ton Force 11.81" Stroke (300mm) 28.74 Die Height (730mm) 1.97" Slide Adjustment (50mm) 35.43" LR x 39.37" FB Bed Area (900mm x 1000mm) 35.43" LR x 39.37" FB Slide Area (900mm x 1000mm) 20-30 SPM Variable Sound Enclosure
55	ID MA35579 Make AIDA Model PK63 YOM 1980 Condition Good Condition Photo See Photo Capacity : 630 ton Stroke : 140 mm SPM : 45 Bolster area : 560 x 700 mm Slide area ; 430 x 600 mm Adjustment : 15 mm Main motor : 37 kw
56	ID MA33814 Make Taiwan Model YOM Condition Good Condition Photo See Photo Capacity: 450 ton Capacity: 600 ton
57	ID MA33097 Make AIDA,Japan Model FMX-L2-3000 YOM 1988 Condition Good Condition Photo See Photo 3000 TON AIDA SSDC LINK MOTION 2 POINT TRANSFER PRESS, MODEL FMX-L2-3000(2)-220-135, 22.83" STR, 47.3" DIE HEIGHT, 2" ADJ, 86.6" LR X 53.2" FB BA,4 Stage Transfer, 14-20 SPM 22.83" STROKE 2" POWER RAM ADJUSTMENT 47.24" SHUT HEIGHT 14 - 20 SPM 86.6" x 53.15 BED 86.6" x 53.15" RAM HYDRAULIC OVERLOADS HYDRAULIC TIE ROD NUTS MICRO INCHING ROLLING BOLSTERS LINK DRIVE 1990 AIDA 3 AXIS TRANSFER SYSTEM 54" WINDOWS 185 KW(2) 480/3/60 EQUIPPED WITH 6.35" THICK BOLSTER MOTOR & ELECTRICS SLIDE KNOCKOUT SPECIFICATIONS TYPE PNEUMATIC T WING TYPE CAPACITY 3 tf STROKE 50 mm DIAMETER OF KNOCKOUT PIN 60 mm INSTALLED STAGES (2,3,4 STAGE) BED KNOCKOUT SPECIFICATIONS MECHANICAL TYPE CAPACITY AT TOTAL STAGES 130 tf STROKE 200 mm DIAMETER OF KNOCKOUT PINS 60 mm INSTALLED STAGES (1,2,3,4 STAGE) TRANSFER FEEDER SPECIFICATIONS 3-AXIS TRANSFER DRIVE AIDA FEED STROKE 400 mm CLAMP STROKE PER SIDE 80 mm LIFT STROKE 130 mm DISTANCE BETWEEN BARS AT CLAMP 400 mm FEED DIRECTION LEFT TO RIGHT BOLSTER TO FEED BAR BOTTOM AT DOWN POSITION 790 mm FEED BAR SECTION W X H 690 mm X 130 mm USING SPACE DIMENSIONS ORIGINAL PRESS MANUALS & DRAWINGS INCLUDED APPROX. HEIGHT ABOVE FLOOR 386"
58	ID MA31776 Make Fukui Model YOM Condition Good Condition Photo See Photo Capacity: 1500 ton Stroke: 250 mm Die Height: 1030 mm SPM : 25 - 40 Adjust: 50 mm Bolster: 1500 x 1100 Slide: 1100 x 1100 mm Bed Knockout: 100 tf Knockout Stroke: 125 mm Transfer Feed Stroke: 200 mm Clamp Stroke: 100 mm
59	ID MA31451 Make AIDA Model YOM 1981 Condition Disassembled Photo See Photo MODEL: PK-1500 CAPACITY: 1,500TON STROKE LENGTH: 220MM STROKE SPEED: 15SPM SLIDE DIMENSION: 706 x 1,000MM BOLSTER DIMENSION : 780 x 1,000MM DIE HEIGHT: 750MM SLIDE ADJUSTMENT: 15MM KNOCKOUT CAPACITY: 75TON MAIN MOTOR: 100KW
60	ID MA31178 Make AIDA,Japan Model YOM Condition Good Condition Photo See Photo 250 tons , ram stroke 140 mm , 50 SPM , table size 400 x 500 mm , ram size 300 x 400 mm , shut height 350 mm , adjustment stroke 15 mm , motor power 22kW
61	ID MA31166 Make Arisa Model YOM Condition Good Condition Photo See Photo Capacity- 400 tons point of strength : mm energy available in blow to blow : 3695 kgm. Energy available in continuous blow : 1595 kgm. Speed : 30 gpm. Demensions of the table ID x FA mm 950 x 860 HOLE OF THE TABLE ID x FA mm ---- dimensions of the base of the slide : ID Distance from the window to the table FA mm 750 x 750 hole portatroqueles according to : DIN - 810 mm ----- Course : mm 300 Closing height on the table (Couso down and regulation up) with the maximum course : mm 675 closing height on the table plate : mm 475 thickness of the table plate : mm 200 Closing height regulation : mm 150 step between posts : mm 950 Distance center of the car to uprights : mm 475 dimensions of the height windows Height x FA :mm ------- Distance from the window to the table : mm ------ service tension : v. 380 power line section : mm2 : 25 main engine : CV/rpm. : 50/1000 regulation of the relay against overloads : A. 90 motor line section : mm2 10 pneumatic line pressure : kg./cm2 6 pressure required for the brake-clutch : kg./cm2 5 necessary pressure for balancing of the Slide (without die) : kg./cm2 3.5 weight of the balancing die 1 kg./cm2 kg. 3545 trapezoidal belts pirelli : Kind c-162 weight of the press : kg. 34.000 With BOLSTER
62	ID MA31165 Make Arisa Model YOM Condition Good Condition Photo See Photo Capacity- 1250 tons Point of strength : 7 mm Intermediate Step : 1150 mm Holes of the montants : 600x1000 mm surface of the table plate : 1050x1200 mm car surface : 900x1200 mm course : 400 mm closing height on the table : 800 mm regulation of the car : 150 mm floor height : 1100 mm racing per minute : 30cr/min total power of the steering wheel : 38,000 kgm energy available in blow to blow : 16,300 kgm Inertia running time : 0.3 sec service tension : 380 v Total height above ground : 6.9 m total weight : 98,000 kg electric power cable : 250 mm pneumatic pipe : 3/4 Motor : Principal : 150 cv. : 750 r.p.m. Regulation : 1 cv. : 1500 r.p.m. lubrication installation : main line pressure : 50 kg/cm2 Power Switch pressure maxima : 25 kg/cm2 deposit capacity : 200 liters compressed air pressure : 5 kg/ cm2 Clutch utilization pressure : brake : 4/6 kg/cm2 With Bolster
63	ID MA31164 Make Zdas Model YOM Condition Good Condition Photo See Photo Capacity- 630 tons Course : 400 mm Closing Height : 800 mm Carriage Regulation : 170 mm force : 630 kn Table Surface : 780x780 mm Step between stiles : 1120 mm Thickness Table : 250 mm Motor Principle : 55 kw Nº golpes x minuto : 20
64	ID MA31062 Make AIDA Model YOM Condition Good Condition Photo See Photo Capacity : 400 ton Stoke : 140 mm SPM : 45 Die Height : 370 mm Adjust : 15 mm Slide : 500 x 370 mm Bolster : 600 x 480 mm
65	ID MA30997 Make AIDA Model YOM 1979 Condition Photo See Photo PK-630 MODEL Capacity : 630 ton Stroke : 180 mm. Die Height : 420 mm. Slide adjust : 40 mm. Bolster size : 560x700 mm.
66	ID MA30919 Make AIDA,Japan Model YOM 1982 Condition Good Condition Photo See Photo Make:AIDA(Japan) Model:PK-150 Slidse stroke:220mm SPM:20 Bolster area:780mm x 1000mm(LR xFB) Bolster thickness:200mm Slide area:700x1000mm((LR xFB) Dieheight: 750mm Main motor:100KW x4P Slide adjustment:15mm (Knock out equipment) Capacity:75ton(3units) Knock stroke:70mm Air pressure:5kg/cm2 Main motor: 100KW Slide adjustment motor: 2.7 KW (Dimension) Approximately 4500mm x 5000mm x 6945mm(from floor)
67	ID MA30855 Make AIDA,Japan Model YOM 1972 Condition Good Condition Photo See Photo 400 ton cold forging
68	ID MA30687 Make Komatsu Model YOM Condition Photo See Photo Capacity 500 ton Stroke 370 mm SPM 20 Die Height 750 mm Adjust 50 mm Bolster 670 x 900 mm Slide 780 x 600 mm Front Opening 890 mm
69	ID MA30663 Make Komatsu Model MKR300 YOM 1980 Condition Photo See Photo Max. ram force: 300 tons Slide stroke: 200/320 mm Number of stroke per minute: 30 Die height (stroke down, adjust up): 600/540 mm Slide adjustment: 80 mm Bolster area: 630x780x140 mm Slide area: 610x600 mm Distance between columns: 650 mm Cushion bolster capacity: 25 t Cushion stroke: 100 mm Main motor: 55 kW Power source: 380V/50Hz Air pressure: 5,5 kg/cm2 Press weight: 22 t Quantity:6 no Condition: Mechanical part in good condition. Control cabinets incomplete. The main motors are on the presses.
70	ID MI6853 Make Wilkins & Mitchell Model YOM Condition Good Condition Photo See Photo  |  See Video Capacity : 800 Ton Weight : 90 Ton (Approx) Suspension : Single Point Extrusion : 800 Ton Width between : 41” side frames Stroke of Slide : 10” Bolster Area : 42” ( Left / Right ) & 42” ( Front / Back ) Slide Area : 24” ( Left / Right ) & 24” ( Front / Back ) Height : 16.10 ft Front : 7.9 ft Width : 3.5 ft Gear Diameter : 4.0 ft (Double Helical Gear) Flywheel Diameter : 4 ft Flywheel Width : 3.75 ft Speed : 25 Strokes/Min
71	ID MI6852 Make Craig & Donald Model YOM Condition Photo See Photo Capacity : 500 Ton, Weight: 40 Ton (Approx), Suspension: Single Point, Extrusion: 500 Ton, Width between : 31” side frames, Stroke of Slide : 12”, Maximum Vertical : 36 ½”, Die Space Bolster Area : 31” ( Left / Right ) & 31” ( Front / Back ) Slide Area : 24” ( Left / Right ) & 24” ( Front / Back ) Height : 3900 mm ( 12.8 ft ) Front : 1720 mm ( 5.6 ft ) Width : 1520 mm ( 5 ft ) Gear Diameter : 2600 mm ( 8.5 ft ) Gear Width : 440 mm ( 1.5 ft ) Flywheel Diameter : 1720 mm ( 5.6 ft ) Flywheel Width : 450 mm ( 1.5 ft ) Speed : 30 Strokes/Min Ejector Capacity : 50 Ton through 2” Bottom Stroke : 6” Adjustment : 2” Cold Forging Mechanical Press Machine with Pneumatic Multi Disc Clutch & Break Facility
72	ID MA30455 Make Verson Model YOM Condition Good condition,under power Photo See Photo Capacity : 1500 t, Slide Stroke : 250 mm, Die Height : 755 mm, Slide Adjustment : 25 mm, Rpm : 25/60hz, Slide Size [Rl X Fr] : 1170 mm X 925 mm, Bolster Size [Rl X Fr] : 1170 mm X 1120 mm, Air Pressure : 5.0 kg/Square Centimeters, Main Motor Power : 75 kw. 4p-60hz, Height Of Press : 7800 mm, Weight Of Press : 95 t.
73	ID MA30336 Make AIDA,Japan Model PK-VK400 YOM 1965 Condition Good Condition Photo See Photo Capacity : 400 ton, SPM : 40, Die Height : 370 mm, Stroke Length : 140 mm, Slide Area : 370 x 400 mm, Bolster Area : 480 x 600 mm.
74	ID MA30194 Make AIDA,Japan Model PK40 YOM Condition Good Condition Photo See Photo Capacity : 400 ton, Stroke : 140 mm, SPM : 45, Bolster : 400 x 600 mm, Slide : 370 x 500 mm, Die Height : 370 mm, Adjust : 15 mm, Knockout : 20 tons, Knockout stroke : 70 mm, Main Motor : 22 Kw x 4p.
75	ID MA29399 Make Shli Taiwan Model KEP650 YOM Condition Brand New Photo See Photo Capacity : 650 tons, Rated Tonnage Point ：8.0 mm, Stroke : 220 mm, Stroke Per Minute : Standard Type with Fixed : 25 S.P.M / 60 HP Motor / Main Motor, Die Height : 600 mm, Slide Adjustment : 12 mm, Bolster Area (L.R×F.B) : 700 × 600 mm, Slide Area (L.R×F.B) : 900×840 mm, Slide Adjusting Motor ：1 HP, Bolster Thickness : 200 mm, Air Pressure : 5 kg/cm2, Standard Accessories :- Hydraulic Over Load Protector. Against Over-Run Safety Device. Pneumatic Counter Balancers. Rotary Cam Limit Switch. Crank Angle Indicator (Electric Type). Die Height Indicator. Magnetic Stroke Counter. Automatic Recirculating Lubrication System. Slide Adjust Device (Electrical). Maintenance Tool Box. Operation Manual.
76	ID MA28940 Make Sumitomo,Japan Model YOM Condition Good Condition Photo See Photo Capacity: 500 ton, Stroke:300 mm, SPM:40, Die height:1200 mm, Bolster:1700 x 1050 mm, Slide:1500 x 1000 mm, Adjust:150 mm, Main motor: 45 Kw,8p
77	ID MA28736 Make AIDA,Japan Model UL5000-1-200-95 YOM 2008 Condition Good Condition Photo See Photo Type: S Motion, 9 point support. Capacity : 500 ton, Stroke : 250 mm, No-load SPM : 20-60, Micro inching : about 10 spm, Die height : 700 mm, Slide Adjustment : 100 mm, Slide Size : 2000 X 950 mm (LR x FB), Bolster Size : 2000 X 1000 mm, Bolster Thickness : 200 mm, The maximum mold weight : 2500 kg, Main motor power : AC200V, 50HZ, Main Motor : INV55 (inverter control), Air pressure : 0.5 MPa, Height : 4360 mm, Press weight : 85 tons.
78	ID MA28735 Make AIDA,Japan Model YOM 1995 Condition Good Condition Photo See Photo Capacity : 1000 ton, Electricity : 400V, 200V, 60HZ, Stroke : 200 mm, SPM : 25-45, Micro inching : 3 SPM, Die height : 700 mm, Slide Adjustment : 50 mm, Slide : 1200 mm x 1000 mm, Bolster : 1200 mm x 1100 mm, Bolster Thickness : 250 mm, Maximum molding Weight : 1.5 ton, Main motor : 90KW 5CR.
79	ID MA28712 Make Nagano Model KJP400 YOM 1993 Condition Good Condition Photo See Photo Capacity: 400 ton, Stroke: 180 mm, Stroke per min: 50, Shut height: 403 mm, Adjustment of slide: 20 mm, Bed area: 550 x 650 mm, Air press required: 4 5 Main motor: 37, Adjusting motor: 0.75
80	ID MA28526 Make AIDA,Japan Model PK-VKs-250 YOM 1975 Condition Good Condition Photo See Photo Frame type : H Press capacity : 250 ton, Stroke length : 70 mm, Stroke per minute : 70 S.P.M, Slide area : 400 x 500 mm, Slide adjustment : 15 mm, Die height : 300 mm, Material of frame : Steel, Motor power : 20 kW, Machine weight : 18 ton.
81	ID MA28525 Make Komatsu Maypress Model MKN2-300/8 YOM Condition Good Condition Photo See Photo Frame type : H Press Capacity : 300 ton, Stroke length : 88 mm, Stroke per minute : 44 S.P.M, Table size : 400 x 500 mm, Slide adjustment : 50 mm, Die height : 300 mm, Material of frame : Steel, Motor power : 5.5 kW, Machine weight : 8 ton.
82	ID MA28405 Make AIDA,Japan Model K1-2500E YOM 2002 Condition Good Condition Photo See Photo Capacity :250 ton, Ram Stroke : 160 mm, Bolster area : 600 x 500 mm, Stroke per minute : 65 spm, Die height : 400 mm, Bed knockouts. Photoelectric guard.